2022-04-26 16:28 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.25.3 Released.

2022-04-21 10:26 +0000 [94e895d430]  Ben Ford <bford@digium.com>

	* res_pjsip_stir_shaken.c: Fix enabled when not configured.

	  There was an issue with the conditional where STIR/SHAKEN would be
	  enabled even when not configured. It has been changed to ensure that if
	  a profile does not exist and stir_shaken is not set in pjsip.conf, then
	  the conditional will return from the function without performing
	  STIR/SHAKEN operations.

	  ASTERISK-30024

	  Change-Id: I41286a3d35b033ccbfbe4129427a62cb793a86e6

2022-04-14 21:50 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.25.2 Released.

2022-04-14 16:36 +0000 [4bd01a473f]  Asterisk Development Team <asteriskteam@digium.com>

	* Doing a fresh summary

2022-04-14 15:57 +0000 [be4fd38585]  Asterisk Development Team <asteriskteam@digium.com>

	* Update for 16.25.2

2022-04-14 15:51 +0000 [cdb5f570c3]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.25.2
2022-04-14 15:49 +0000 [8774302f38]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.25.2
2022-02-10 06:02 +0000 [f52228199d]  Joshua C. Colp <jcolp@sangoma.com>

	* func_odbc: Add SQL_ESC_BACKSLASHES dialplan function.

	  Some databases depending on their configuration using backslashes
	  for escaping. When combined with the use of ' this can result in
	  a broken func_odbc query.

	  This change adds a SQL_ESC_BACKSLASHES dialplan function which can
	  be used to escape the backslashes.

	  This is done as a dialplan function instead of being always done
	  as some databases do not require this, and always doing it would
	  result in incorrect data being put into the database.

	  ASTERISK-29838

	  Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d

2022-02-28 11:19 +0000 [82f3ec6315]  Ben Ford <bford@digium.com>

	* AST-2022-002 - res_stir_shaken/curl: Add ACL checks for Identity header.

	  Adds a new configuration option, stir_shaken_profile, in pjsip.conf that
	  can be specified on a per endpoint basis. This option will reference a
	  stir_shaken_profile that can be configured in stir_shaken.conf. The type
	  of this option must be 'profile'. The stir_shaken option can be
	  specified on this object with the same values as before (attest, verify,
	  on), but it cannot be off since having the profile itself implies wanting
	  STIR/SHAKEN support. You can also specify an ACL from acl.conf (along
	  with permit and deny lines in the object itself) that will be used to
	  limit what interfaces Asterisk will attempt to retrieve information from
	  when reading the Identity header.

	  ASTERISK-29476

	  Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406

2022-01-07 08:50 +0000 [bf6234e5df]  Ben Ford <bford@digium.com>

	* AST-2022-001 - res_stir_shaken/curl: Limit file size and check start.

	  Put checks in place to limit how much we will actually download, as well
	  as a check for the data we receive at the start to ensure it begins with
	  what we would expect a certificate to begin with.

	  ASTERISK-29872

	  Change-Id: Ifd3c6b8bd52b8b6192a04166ccce4fc8a8000b46
	  (cherry picked from commit 256e1608464f0c7c0fb3a0d461893c01e2c9404e)

2022-03-29 21:38 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.25.1 Released.

2022-03-25 14:00 +0000 [2944d6834c]  George Joseph <gjoseph@digium.com>

	* Makefile:  Disable XML doc validation

	  make_xml_documentation was being called with the --validate
	  flag set when it shouldn't have been.  This was causing
	  build failures if neither xmllint nor xmlstarlet were installed.
	  The correct behavior is to simply print a message that either
	  one of those tools should be installed for validation and
	  continue with the build.

	  ASTERISK-29988

	  Change-Id: Idc6c44114e7dd3fadae183a4e22f4fdba0b8a645

2022-03-25 09:33 +0000 [32ccd34191]  George Joseph <gjoseph@digium.com>

	* make_xml_documentation: Remove usage of get_sourceable_makeopts

	  get_sourceable_makeopts wasn't handling variables with embedded
	  double quotes in them very well.  One example was the DOWNLOAD
	  variable when curl was being used instead of wget.  Rather than
	  trying to fix get_sourceable_makeopts, it's just been removed.

	  ASTERISK-29986
	  Reported by: Stefan Ruijsenaars

	  Change-Id: Idf2a90902228c2558daa5be7a4f8327556099cd2

2022-03-24 13:07 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.25.0 Released.

2022-03-17 15:34 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.25.0-rc1 Released.

2022-03-17 10:18 +0000 [8663dab865]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.25.0
2022-03-17 09:15 +0000 [705600d48e]  Ben Ford <bford@digium.com>

	* AMI: Bump version for 16.25.0.

	  Change-Id: I1fcec9b7698a7ce9f8e6ba3b780fb53cedd3c6d4

2022-02-08 16:58 +0000 [90eaf227c6]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_pubsub: update RLS to reflect the changes to the lists

	  This patch makes the Resource List Subscriptions (RLS) dynamic.
	  The asterisk updates the current subscriptions to reflect the changes
	  to the list on the subscriptions refresh. If list items are added,
	  removed, updated or do not exist anymore, the asterisk regenerates
	  the resource list.

	  ASTERISK-29906 #close

	  Change-Id: Icee8c00459a7aaa43c643d77ce6f16fb7ab037d3

2022-02-18 03:19 +0000 [e82627c001]  Boris P. Korzun <drtr0jan@yandex.ru>

	* res_config_pgsql: Add text-type column check in require_pgsql()

	  Omit "unsupported column type 'text'" warning in logs while
	  using text-type column in the PgSQL backend.

	  ASTERISK-29924 #close

	  Change-Id: I48061a7d469426859670db07f1ed8af1eb814712

2022-02-09 04:28 +0000 [3069e1c640]  Kfir Itzhak <mastertheknife@gmail.com>

	* app_queue: Add QueueWithdrawCaller AMI action

	  This adds a new AMI action called QueueWithdrawCaller.
	  This AMI action makes it possible to withdraw a caller from a queue,
	  in a safe and a generic manner.
	  This can be useful for retrieving a specific call and
	  dispatching it to a specific extension.
	  It works by signaling the caller to exit the queue application
	  whenever it can. Therefore, it is not guaranteed
	  that the call will leave the queue.

	  ASTERISK-29909 #close

	  Change-Id: Ic15aa238e23b2884abdcaadff2fda7679e29b7ec

2022-03-03 16:44 +0000 [0d4dfbf8e3]  Kevin Harwell <kharwell@sangoma.com>

	* AST-2022-006: pjproject - unconstrained malformed multipart SIP message

	  ASTERISK-29945 #close

	  Change-Id: Ic58957afc453195d53c2bd25c905df3d91d1abe6

2022-03-03 16:42 +0000 [7f76dce133]  Kevin Harwell <kharwell@sangoma.com>

	* AST-2022-005: pjproject - undefined behavior after freeing a dialog set

	  ASTERISK-29945 #close

	  Change-Id: Ia8ce6d82b115c82c1138747c72a0adcaa42b718c

2022-03-03 16:41 +0000 [08c92cb997]  Kevin Harwell <kharwell@sangoma.com>

	* AST-2022-004: pjproject - possible integer underflow on STUN message

	  ASTERISK-29945 #close

	  Change-Id: I721cd254e4f8aa6d3a97a37529cca53519694c54

2022-03-02 08:57 +0000 [45fec4bb7c]  George Joseph <gjoseph@digium.com>

	* xml.c, config,c:  Add stylesheets and variable list string parsing

	  Added functions to open, close, and apply XML Stylesheets
	  to XML documents.  Although the presence of libxslt was already
	  being checked by configure, it was only happening if xmldoc was
	  enabled.  Now it's checked regardless.

	  Added ability to parse a string consisting of comma separated
	  name/value pairs into an ast_variable list.  The reverse of
	  ast_variable_list_join().

	  Change-Id: I1e1d149be22165a1fb8e88e2903a36bba1a6cf2e

2022-03-01 10:58 +0000 [f7158cc659]  George Joseph <gjoseph@digium.com>

	* xmldoc: Fix issue with xmlstarlet validation

	  Added the missing xml-stylesheet and Xinclude namespace
	  declarations in pjsip_config.xml and pjsip_manager.xml.

	  Updated make_xml_documentation to show detailed errors when
	  xmlstarlet is the validator.  It's now run once with the '-q'
	  option to suppress harmless/expected messages and if it actually
	  fails, it's run again without '-q' but with '-e' to show
	  the actual errors.

	  Change-Id: I4bdc9d2ea6741e8d2e5eb82df60c68ccc59e1f5e

2022-02-14 07:31 +0000 [2fcd80ef38]  George Joseph <gjoseph@digium.com>

	* Makefile: Allow XML documentation to exist outside source files

	  Moved the xmldoc build logic from the top-level Makefile into
	  its own script "make_xml_documentation" in the build_tools
	  directory.

	  Created a new utility script "get_sourceable_makeopts", also in
	  the build_tools directory, that dumps the top-level "makeopts"
	  file in a format that can be "sourced" from shell sscripts.
	  This allows scripts to easily get the values of common make
	  build variables such as the location of the GREP, SED, AWK, etc.
	  utilities as well as the AST* and library *_LIB and *_INCLUDE
	  variables.

	  Besides moving logic out of the Makefile, some optimizations
	  were done like removing "third-party" from the list of
	  subdirectories to be searched for documentation and changing some
	  assignments from "=" to ":=" so they're only evaluated once.
	  The speed increase is noticeable.

	  The makeopts.in file was updated to include the paths to
	  REALPATH and DIRNAME.  The ./conifgure script was setting them
	  but makeopts.in wasn't including them.

	  So...

	  With this change, you can now place documentation in any"c"
	  source file AND you can now place it in a separate XML file
	  altogether.  The following are examples of valid locations:

	  res/res_pjsip.c
	      Using the existing /*** DOCUMENTATION ***/ fragment.

	  res/res_pjsip/pjsip_configuration.c
	      Using the existing /*** DOCUMENTATION ***/ fragment.

	  res/res_pjsip/pjsip_doc.xml
	      A fully-formed XML file.  The "configInfo", "manager",
	      "managerEvent", etc. elements that would be in the "c"
	      file DOCUMENTATION fragment should be wrapped in proper
	      XML.  Example for "somemodule.xml":

	      <?xml version="1.0" encoding="UTF-8"?>
	      <!DOCTYPE docs SYSTEM "appdocsxml.dtd">
	      <docs>
	          <configInfo>
	          ...
	          </configInfo>
	      </docs>

	  It's the "appdocsxml.dtd" that tells make_xml_documentation
	  that this is a documentation XML file and not some other XML file.
	  It also allows many XML-capable editors to do formatting and
	  validation.

	  Other than the ".xml" suffix, the name of the file is not
	  significant.

	  As a start... This change also moves the documentation that was
	  in res_pjsip.c to 2 new XML files in res/res_pjsip:
	  pjsip_config.xml and pjsip_manager.xml.  This cut the number of
	  lines in res_pjsip.c in half. :)

	  Change-Id: I486c16c0b5a44d7a8870008e10c941fb19b71ade

2022-02-17 10:26 +0000 [13177a310d]  George Joseph <gjoseph@digium.com>

	* build: Refactor the earlier "basebranch" commit

	  Recap from earlier commit:  If you have a development branch for a
	  major project that will receive gerrit reviews it'll probably be
	  named something like "development/16/newproject" or a work branch
	  based on that "development" branch.  That will necessitate
	  setting "defaultbranch=development/16/newproject" in .gitreview.
	  The make_version script uses that variable to construct the
	  asterisk version however, which results in versions
	  like "GIT-development/16/newproject-ee582a8c7b" which is probably
	  not what you want.  It also constructs the URLs for downloading
	  external modules with that version, which will fail.

	  Fast-forward:

	  The earlier attempt at adding a "basebranch" variable to
	  .gitreview didn't work out too well in practice because changes
	  were made to .gitreview, which is a checked-in file.  So, if
	  you wanted to rebase your work branch on the base branch, rebase
	  would attempt to overwrite your .gitreview with the one from
	  the base branch and complain about a conflict.

	  This is a slighltly different approach that adds three methods to
	  determine the mainline branch:

	  1.  --- MAINLINE_BRANCH from the environment

	  If MAINLINE_BRANCH is already set in the environment, that will
	  be used.  This is primarily for the Jenkins jobs.

	  2.  --- .develvars

	  Instead of storing the basebranch in .gitreview, it can now be
	  stored in a non-checked-in ".develvars" file and keyed by the
	  current branch.  So, if you were working on a branch named
	  "new-feature-work" based on "development/16/new-feature" and wanted
	   to push to that branch in Gerrit but wanted to pull the external
	   modules for 16, you'd create the following .develvars file:

	  [branch "new-feature-work"]
	      mainline-branch = 16

	  The .gitreview file would still look like:

	  [gerrit]
	  defaultbranch=development/16/new-feature

	  ...which would cause any reviews pushed from "new-feature-work" to
	  go to the "development/16/new-feature" branch in Gerrit.

	  The key is that the .develvars file is NEVER checked in (it's been
	  added to .gitignore).

	  3.  --- Well Known Development Branch

	  If you're actually working in a branch named like
	  "development/<mainline_branch>/some-feature", the mainline branch
	  will be parsed from it.

	  4.  --- .gitreview

	  If none of the earlier conditions exist, the .gitreview
	  "defaultbranch" variable will be used just as before.

	  Change-Id: I1cdeeaa0944bba3f2e01d7a2039559d0c266f8c9

2022-02-20 14:16 +0000 [83372e7ab5]  George Joseph <gjoseph@digium.com>

	* core: Config and XML tweaks needed for geolocation

	  Added:

	  Replace a variable in a list:
	  int ast_variable_list_replace_variable(struct ast_variable **head,
	      struct ast_variable *old, struct ast_variable *new);
	  Added test as well.

	  Create a "name=value" string from a variable list:
	  'name1="val1",name2="val2"', etc.
	  struct ast_str *ast_variable_list_join(
	      const struct ast_variable *head, const char *item_separator,
	      const char *name_value_separator, const char *quote_char,
	      struct ast_str **str);
	  Added test as well.

	  Allow the name of an XML element to be changed.
	  void ast_xml_set_name(struct ast_xml_node *node, const char *name);

	  Change-Id: I330a5f63dc0c218e0d8dfc0745948d2812141ccb

2022-01-09 07:32 +0000 [466a361626]  Naveen Albert <asterisk@phreaknet.org>

	* ami: Allow events to be globally disabled.

	  The disabledevents setting has been added to the general section
	  in manager.conf, which allows users to specify events that
	  should be globally disabled and not sent to any AMI listeners.

	  This allows for processing of these AMI events to end sooner and,
	  for frequent AMI events such as Newexten which users may not have
	  any need for, allows them to not be processed. Additionally, it also
	  cleans up core debug as previously when debug was 3 or higher,
	  the debug was constantly spammed by "Analyzing AMI event" messages
	  along with a complete dump of the event contents (often for Newexten).

	  ASTERISK-29853 #close

	  Change-Id: Id42b9a3722a1f460d745cad1ebc47c537fd4f205

2022-02-23 07:58 +0000 [be09484831]  Joshua C. Colp <jcolp@sangoma.com>

	* jansson: Update bundled to 2.14 version.

	  ASTERISK-29353

	  Change-Id: I4ea43eda1691565563a4c03ef37166952d211b2b

2022-01-06 07:57 +0000 [f60dcfc333]  Naveen Albert <asterisk@phreaknet.org>

	* func_channel: Add lastcontext and lastexten.

	  Adds the lastcontext and lastexten channel fields to allow users
	  to access previous dialplan execution locations.

	  ASTERISK-29840 #close

	  Change-Id: Ib455fe300cc8e9a127686896ee2d0bd11e900307

2022-02-04 19:27 +0000 [a1f207bcf7]  Naveen Albert <asterisk@phreaknet.org>

	* channel.c: Clean up debug level 1.

	  Although there are 10 debugs levels, over time,
	  many current debug calls have come to use
	  inappropriately low debug levels. In particular,
	  a select few debug calls (currently all debug 1)
	  can result in thousands of debug messages per minute
	  for a single call.

	  This can adds a lot of noise to core debug
	  which dilutes the value in having different
	  debug levels in the first place, as these
	  log messages are from the core internals are
	  are better suited for higher debug levels.

	  Some debugs levels are thus adjusted so that
	  debug level 1 is not inappropriately overloaded
	  with these extremely high-volume and general
	  debug messages.

	  ASTERISK-29897 #close

	  Change-Id: I55a71598993552d3d64a401a35ee99474770d4b4

2022-02-17 13:47 +0000 [c214e0d115]  Naveen Albert <asterisk@phreaknet.org>

	* configs, LICENSE: remove pbx.digium.com.

	  pbx.digium.com no longer accepts IAX2 calls and
	  there are no plans for it to come back.

	  Accordingly, nonworking IAX2 URIs are removed from
	  both the LICENSE file and the sample config.

	  ASTERISK-29923 #close

	  Change-Id: I257c54d4d812ed6b4bd4cbec2cd7ebe2b87b5bad

2022-02-04 19:11 +0000 [c4afe9e664]  Naveen Albert <asterisk@phreaknet.org>

	* documentation: Add since tag to xmldocs DTD

	  Adds the since tag to the documentation DTD so
	  that individual applications, functions, etc.
	  can now specify when they were added to Asterisk.

	  This tag is added at the individual application,
	  function, etc. level as opposed to at the module
	  level because modules can expand over time as new
	  functionality is added, and granularity only
	  to the module level would generally not be useful.

	  This enables the ability to more easily determine
	  when new functionality was added to Asterisk, down
	  to minor version as opposed to just by major version.
	  This makes it easier for users to write more portable
	  dialplan if desired to not use functionality that may
	  not be widely available yet.

	  ASTERISK-29896 #close

	  Change-Id: Ibbb35c702d8038bdc3fd0a944fbfa69384cc15d5

2022-01-13 08:37 +0000 [6f128da80c]  Naveen Albert <asterisk@phreaknet.org>

	* asterisk: Add macro for curl user agent.

	  Currently, each module that uses libcurl duplicates the standard
	  Asterisk curl user agent.

	  This adds a global macro for the Asterisk user agent used for
	  curl requests to eliminate this duplication.

	  ASTERISK-29861 #close

	  Change-Id: I9fc37935980384b4daf96ae54fa3c9adb962ed2d

2022-02-16 05:34 +0000 [76e3fb402f]  Naveen Albert <asterisk@phreaknet.org>

	* app_voicemail: Emit warning if asking for nonexistent mailbox.

	  Currently, if VoiceMailMain is called with a mailbox, if that
	  mailbox doesn't exist, then the application silently falls back
	  to prompting the user for the mailbox, as if no arguments were
	  provided.

	  However, if a specific mailbox is requested and it doesn't exist,
	  then no warning at all is emitted.

	  This fixes this behavior to now warn if a specifically
	  requested mailbox could not be accessed, before falling back to
	  prompting the user for the correct mailbox.

	  ASTERISK-29920 #close

	  Change-Id: Ib4093b88cd661a2cabc5d685777d4e2f0ebd20a4

2022-02-07 16:31 +0000 [99e0bedf7b]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_pubsub: fix Batched Notifications stop working

	  If Subscription refresh occurred between when the batched notification
	  was scheduled and the serialized notification was to be sent,
	  then new schedule notification task would never be added.

	  There are 2 threads:

	  thread #1. ast_sip_subscription_notify is called,
	  if notification_batch_interval then call schedule_notification.
	  1.1. The schedule_notification checks notify_sched_id > -1
	  not true, then
	  send_scheduled_notify = 1
	  notify_sched_id =
	    ast_sched_add(sched, sub_tree->notification_batch_interval, sched_cb....
	  1.2. The sched_cb pushes task serialized_send_notify to serializer
	  and returns 0 which means no reschedule.
	  1.3. The serialized_send_notify checks send_scheduled_notify if it's false
	  the just returns. BUT notify_sched_id is still set, so no more ast_sched_add.

	  thread #2. pubsub_on_rx_refresh is called
	  2.1 it pushes serialized_pubsub_on_refresh_timeout to serializer
	  2.2. The serialized_pubsub_on_refresh_timeout calls pubsub_on_refresh_timeout
	  which calls send_notify
	  2.3. The send_notify set send_scheduled_notify = 0;

	  The serialized_send_notify should always unset notify_sched_id.

	  ASTERISK-29904 #close

	  Change-Id: Ifc50c00b213c396509e10326a1ed89d8cf8c7875

2022-02-18 06:09 +0000 [b471b40bc7]  Naveen Albert <asterisk@phreaknet.org>

	* func_db: Add validity check for key names when writing.

	  Adds a simple sanity check for key names when users are
	  writing data to AstDB. This captures four cases indicating
	  malformed keynames that generally result in bad data going
	  into the DB that the user didn't intend: an empty key name,
	  a key name beginning or ending with a slash, and a key name
	  containing two slashes in a row. Generally, this is the
	  result of a variable being used in the key name being empty.

	  If a malformed key name is detected, a warning is emitted
	  to indicate the bug in the dialplan.

	  ASTERISK-29925 #close

	  Change-Id: Ifc08a9fe532a519b1b80caca1aafed7611d573bf

2021-12-16 13:41 +0000 [78b7ab11a4]  Naveen Albert <asterisk@phreaknet.org>

	* res_stir_shaken: refactor utility function

	  Refactors temp file utility function into file.c.

	  ASTERISK-29809 #close

	  Change-Id: Ife478708c8f2b127239cb73c1755ef18c0bf431b

2022-02-01 09:59 +0000 [dffc4408e7]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_pubsub: provide a display name for RLS subscriptions

	  Whereas BLFs allow to show a display name for each RLS entry,
	  the asterisk provides only the extension now.
	  This is not end user friendly.

	  This commit adds a new resource_list option, resource_display_name,
	  to indicate whether display name of resource or the resource name being
	  provided for RLS entries.
	  If this option is enabled, the Display Name will be provided.
	  This option is disabled by default to remain the previous behavior.
	  If the 'event' set to 'presence' or 'dialog' the non-empty HINT name
	  will be set as the Display Name.
	  The 'message-summary' is not supported yet.

	  ASTERISK-29891 #close

	  Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681

2022-01-13 19:37 +0000 [f0c6b900de]  Naveen Albert <asterisk@phreaknet.org>

	* cli: Add core dump info to core show settings.

	  Adds two pieces of information to the core show settings command
	  which are useful in the context of getting backtraces.

	  The first is to display whether or not Asterisk would generate
	  a core dump if it were to crash.

	  The second is to show the current running directory of Asterisk.

	  ASTERISK-29866 #close

	  Change-Id: Ic42c0a9ecc233381aad274d86c62808d1ebb4d83

2022-02-04 19:46 +0000 [248f670470]  Naveen Albert <asterisk@phreaknet.org>

	* documentation: Adds missing default attributes.

	  The configObject tag contains a default attribute which
	  allows the default value to be specified, if applicable.
	  This allows for the default value to show up specially on
	  the wiki in a way that is clear to users.

	  There are a couple places in the tree where default values
	  are included in the description as opposed to as attributes,
	  which means these can't be parsed specially for the wiki.
	  These are changed to use the attribute instead of being
	  included in the text description.

	  ASTERISK-29898 #close

	  Change-Id: I9d7ea08f50075f41459ea7b76654906b674ec755

2022-02-05 06:39 +0000 [312e8989dd]  Naveen Albert <asterisk@phreaknet.org>

	* app_mp3: Document and warn about HTTPS incompatibility.

	  mpg123 doesn't support HTTPS, but the MP3Player application
	  doesn't document this or warn the user about this. HTTPS
	  streams have become more common nowadays and users could
	  reasonably try to play them without being aware they should
	  use the HTTP stream instead.

	  This adds documentation to note this limitation. It also
	  throws a warning if users try to use the HTTPS stream to
	  tell them to use the HTTP stream instead.

	  ASTERISK-29900 #close

	  Change-Id: Ie3b029be5258c5a701f71ed3b1a7a80d1e03b827

2022-02-02 19:18 +0000 [e6cff954ab]  Mike Bradeen <mbradeen@sangoma.com>

	* taskprocessor.c: Prevent crash on graceful shutdown

	  When tps_shutdown is called as part of the cleanup process there is a
	  chance that one of the taskprocessors that references the
	  tps_singletons object is still running.  The change is to allow for
	  tps_shutdown to check tps_singleton's container count and give the
	  running taskprocessors a chance to finish.  If after
	  AST_TASKPROCESSOR_SHUTDOWN_MAX_WAIT (10) seconds there are still
	  container references we shutdown anyway as this is most likely a bug
	  due to a taskprocessor not being unreferenced.

	  ASTERISK-29365

	  Change-Id: Ia932fc003d316389b9c4fd15ad6594458c9727f1

2022-01-21 13:00 +0000 [aaf507fa36]  Alexei Gradinari <alex2grad@gmail.com>

	* app_queue: load queues and members from Realtime when needed

	  There are a lot of Queue AMI actions and Queue applications
	  which do not load queue and queue members from Realtime.

	  AMI actions
	  QueuePause - if queue not in memory - response "Interface not found".
	  QueueStatus/QueueSummary - if queue not in memory - empty response.

	  Applications:
	  PauseQueueMember - if queue not in memory
	  	Attempt to pause interface %s, not found
	  UnpauseQueueMember - if queue not in memory
	  	Attempt to unpause interface xxxxx, not found

	  This patch adds a new function load_realtime_queues
	  which loads queue and queue members for desired queue
	  or all queues and all members if param 'queuename' is NULL or empty.
	  Calls the function load_realtime_queues when needed.

	  Also this patch fixes leak of ast_config in function set_member_value.

	  Also this patch fixes incorrect LOG_WARNING when pausing/unpausing
	  already paused/unpaused member.
	  The function ast_update_realtime returns 0 when no record modified.
	  So 0 is not an error to warn about.

	  ASTERISK-29873 #close
	  ASTERISK-18416 #close
	  ASTERISK-27597 #close

	  Change-Id: I554ee0eebde93bd8f49df7f84b74acb21edcb99c

2022-02-07 10:55 +0000 [a2eb555230]  Sean Bright <sean.bright@gmail.com>

	* manager.c: Simplify AMI ModuleCheck handling

	  This code was needlessly complex and would fail to properly delimit
	  the response message if LOW_MEMORY was defined.

	  Change-Id: Iae50bf09ef4bc34f9dc4b49435daa76f8b2c5b6e

2022-02-03 15:48 +0000 [7857e7914d]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip.c: Correct minor typos in 'realm' documentation.

	  Change-Id: I886936b808def5540d40071321e72f6bfa19063a

2022-01-31 12:52 +0000 [ba4d6aac20]  Sean Bright <sean.bright@gmail.com>

	* manager.c: Generate valid XML if attribute names have leading digits.

	  The XML Manager Event Interface (amxml) now generates attribute names
	  that are compliant with the XML 1.1 specification. Previously, an
	  attribute name that started with a digit would be rendered as-is, even
	  though attribute names must not begin with a digit. We now prefix
	  attribute names that start with a digit with an underscore ('_') to
	  prevent XML validation failures.

	  This is not backwards compatible but my assumption is that compliant
	  XML parsers would already have been complaining about this.

	  ASTERISK-29886 #close

	  Change-Id: Icfaa56a131a082d803e9b7db5093806d455a0523

2022-02-03 12:19 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.24.0-rc1 Released.

2022-02-03 06:09 +0000 [df9ef1d8d3]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.24.0
2022-02-01 10:09 +0000 [74d8616cd2]  Sean Bright <sean.bright@gmail.com>

	* build_tools/make_version: Fix bashism in comparison.

	  In POSIX sh (which we indicate in the shebang), there is no ==
	  operator.

	  Change-Id: Ic03d38214d14cdf329b0ba272279a815bb532965

2022-01-21 14:08 +0000 [2d0152236b]  George Joseph <gjoseph@digium.com>

	* bundled_pjproject:  Add additional multipart search utils

	  Added the following APIs:
	  pjsip_multipart_find_part_by_header()
	  pjsip_multipart_find_part_by_header_str()
	  pjsip_multipart_find_part_by_cid_str()
	  pjsip_multipart_find_part_by_cid_uri()

	  Change-Id: I6aee3dcf59eb171f93aae0f0564ff907262ef40d

2022-01-07 04:01 +0000 [e03b313fe9]  Mark Petersen <bugs.digium.com@zombie.dk>

	* chan_sip.c Fix pickup on channel that are in AST_STATE_DOWN

	  resolve issue with pickup on device that uses "183" and not "180"

	  ASTERISK-29832

	  Change-Id: I4c7d223870f8ce9a7354e0f73d4e4cb2e8b58841

2022-01-31 07:09 +0000 [8e592dc767]  George Joseph <gjoseph@digium.com>

	* res_pjsip_outbound_authenticator_digest: Prevent ABRT on cleanup

	  In dev mode, if you call pjsip_auth_clt_deinit() with an auth_sess
	  that hasn't been initialized, it'll assert and abort.  If
	  digest_create_request_with_auth() fails to find the proper
	  auth object however, it jumps to its cleanup which does exactly
	  that.  So now we no longer attempt to call pjsip_auth_clt_deinit()
	  if we never actually initialized it.

	  ASTERISK-29888

	  Change-Id: Ib6171c25c9fe8e61cc8d11129e324c021bc30b62

2022-01-26 07:56 +0000 [48fb5c73b7]  George Joseph <gjoseph@digium.com>

	* build: Add "basebranch" to .gitreview

	  If you have a development branch for a major project that
	  will receive gerrit reviews it'll probably be named something
	  like "development/16/newproject".  That will necessitate setting
	  "defaultbranch=development/16/newproject" in .gitreview.  The
	  make_version script uses that variable to construct the asterisk
	  version however, which results in versions like
	  "GIT-development/16/newproject-ee582a8c7b" which is probably not
	  what you want.  Worse, since the download_externals script uses
	  make_version to construct the URL to download the binary codecs
	  or DPMA.  Since it's expecting a simple numeric version, the
	  downloads will fail.

	  To get this to work, a new variable "basebranch" has been added
	  to .gitreview and make_version has been updated to use that instead
	  of defaultversion:

	  .gitreview:
	  defaultbranch=development/16/myproject
	  basebranch=16

	  Now git-review will send the reviews to the proper branch
	  (development/16/myproject) but the version will still be
	  constructed using the simple branch number (16).

	  If "basebranch" is missing from .gitreview, make_version will
	  fall back to using "defaultbranch".

	  Change-Id: I2941a3b21e668febeb6cfbc1a7bb51a67726fcc4

2021-12-15 12:36 +0000 [c2db810735]  Naveen Albert <asterisk@phreaknet.org>

	* cdr: allow disabling CDR by default on new channels

	  Adds a new option, defaultenabled, to the CDR core to
	  control whether or not CDR is enabled on a newly created
	  channel. This allows CDR to be disabled by default on
	  new channels and require the user to explicitly enable
	  CDR if desired. Existing behavior remains unchanged.

	  ASTERISK-29808 #close

	  Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1

2022-01-11 12:33 +0000 [1af8acaf4a]  Naveen Albert <asterisk@phreaknet.org>

	* func_frame_drop: Fix typo referencing wrong buffer

	  In order to get around the issue of certain frames
	  having names that could overlap, func_frame_drop
	  surrounds names with commas for the purposes of
	  comparison.

	  The buffer is allocated and printed to properly,
	  but the original buffer is used for comparison.
	  In most cases, this wouldn't have had any effect,
	  but that was not the intention behind the buffer.
	  This updates the code to reference the modified
	  buffer instead.

	  ASTERISK-29854 #close

	  Change-Id: I430b52e14e712d0e62a23aa3b5644fe958b684a7

2022-01-11 13:19 +0000 [304503c02b]  Naveen Albert <asterisk@phreaknet.org>

	* res_tonedetect: Fixes some logic issues and typos

	  Fixes some minor logic issues with the module:

	  Previously, the OPT_END_FILTER flag was getting
	  tested before options were parsed, so it could
	  never evaluate to true (wrong ordering).

	  Additionally, the initially parsed timeout (float)
	  needs to be compared with 0, not the result int
	  which is set afterwards (wrong variable).

	  ASTERISK-29857 #close

	  Change-Id: I0062bce3b391c15e5df7a714780eeaa96dd93d4c

2022-01-20 06:56 +0000 [ed95dc3282]  Torrey Searle <tsearle@voxbone.com>

	* res/res_rtp_asterisk: fix skip in rtp sequence numbers after dtmf

	  When generating dtmfs, asterisk can incorrectly think packet loss
	  occured during the dtmf generation, resulting in a jump in sequence
	  numbers when forwarding voice frames resumes.  This patch forces
	  asterisk to re-learn the expected sequence number after each DTMF
	  to avoid this

	  ASTERISK-29869 #close

	  Change-Id: Icc7de3d947b207b82c99d3c327af8095884df853

2022-01-21 10:34 +0000 [3260847e4f]  Sean Bright <sean.bright@gmail.com>

	* build: Rebuild configure and autoconfig.h.in

	  autoconfigh.h.in was missed in the original review for this
	  issue. Additionally it looks like I have newer pkg-config autoconf
	  macros on my development machine.

	  ASTERISK-29817

	  Change-Id: I3c85a4de82c5d7d6e0e23dad4c33bb650a86a57b

2022-01-13 16:31 +0000 [a4ebfe8492]  Kevin Harwell <kharwell@sangoma.com>

	* res_http_websocket: Add a client connection timeout

	  Previously there was no way to specify a connection timeout when
	  attempting to connect a websocket client to a server. This patch
	  makes it possible to now do such.

	  Change-Id: I5812f6f28d3d13adbc246517f87af177fa20ee9d

2021-12-08 15:14 +0000 [ee887b66bb]  Mike Bradeen <mbradeen@sangoma.com>

	* sched: fix and test a double deref on delete of an executing call back

	  sched: Avoid a double deref when AST_SCHED_DEL_UNREF is called on an
	  executing call-back. This is done by adding a new variable 'rescheduled'
	  to the struct sched which is set in ast_sched_runq and checked in
	  ast_sched_del_nonrunning. ast_sched_del_nonrunning is a replacement for
	  now deprecated ast_sched_del which returns a new possible value -2
	  if called on an executing call-back with rescheduled set. ast_sched_del
	  is modified to call ast_sched_del_nonrunning to maintain existing code.
	  AST_SCHED_DEL_UNREF is also updated to look for the -2 in which case it
	  will not throw a warning or invoke refcall.
	  test_sched: Add a new unit test sched_test_freebird that will check the
	  reference count in the resolved scenario.

	  ASTERISK-29698

	  Change-Id: Icfb16b3acbc29cf5b4cef74183f7531caaefe21d

2022-01-19 16:33 +0000 [14156f9827]  Luke Escude <luke@primevox.net>

	* res_pjsip_sdp_rtp.c: Support keepalive for video streams.

	  ASTERISK-28890 #close

	  Change-Id: Iad269a8dc36f892ede90fe8ceb3010560c0f70d1

2022-01-04 03:11 +0000 [8c230ebb87]  Mark Petersen <bugs.digium.com@zombie.dk>

	* app_queue.c: Queue don't play "thank-you" when here is no hold time announcements

	  if holdtime is (0 min, 0 sec) there is no hold time announcements
	  we should then also not playing queue-thankyou

	  ASTERISK-29831

	  Change-Id: Ic7e51dcde526b23f1cd8d24e1d1e2d81e10f9d2c

2021-11-10 22:24 +0000 [9e36e57b93]  Michał Górny <mgorny@NetBSD.org>

	* main: Enable rdtsc support on NetBSD

	  Enable the Linux rdtsc implementation on NetBSD as well.  The assembly
	  works correctly there.

	  ASTERISK-29851

	  Change-Id: I460ad9b4d971913420ecb84186f5ba5ab03f6f37

2021-11-10 21:40 +0000 [8789344c4e]  Michał Górny <mgorny@NetBSD.org>

	* build_tools/make_version: Fix sed(1) syntax compatibility with NetBSD

	  Fix the sed(1) invocation used to process git-svn-id not to use "\s"
	  that is a GNU-ism and is not supported by NetBSD sed.  As a result,
	  this call did not work properly and make_version did output the full
	  git-svn-id line rather than the revision.

	  ASTERISK-29852

	  Change-Id: Ie4b406e2748920643446851a0a252a4ca7245772

2021-11-10 22:29 +0000 [96156b7fa2]  Michał Górny <mgorny@NetBSD.org>

	* main/utils: Implement ast_get_tid() for NetBSD

	  Implement the ast_get_tid() function for NetBSD system.  NetBSD supports
	  getting the TID via _lwp_self().

	  ASTERISK-29850

	  Change-Id: If57fd3f9ea15ef5d010bfbdcbbbae9b379f72f8c

2021-11-10 20:05 +0000 [e65f7e50b8]  Michał Górny <mgorny@NetBSD.org>

	* BuildSystem: Fix misdetection of gethostbyname_r() on NetBSD

	  Fix the configure script not to detect the presence of gethostbyname_r()
	  on NetBSD incorrectly.  NetBSD includes it as an internal libc symbol
	  that is not exposed in system headers and that is incompatible with
	  other implementations.  In order to avoid misdetecting it, perform
	  the symbol check only if the declaration is found in the public header
	  first.

	  ASTERISK-29817

	  Change-Id: Iafa359b09908251bcd299ff54be003ea129b9eda

2021-11-10 22:06 +0000 [01d85e0f82]  Michał Górny <mgorny@NetBSD.org>

	* include: Remove unimplemented HMAC declarations

	  Remove the HMAC declarations from the includes.  They are
	  not implemented nor used anywhere, and their presence breaks the build
	  on NetBSD that delivers an incompatible hmac() function in <stdlib.h>.

	  ASTERISK-29818

	  Change-Id: I0c4b88645e30174b1b63846a6b328625b69c2ea7

2022-01-11 12:41 +0000 [23a1512a75]  Naveen Albert <asterisk@phreaknet.org>

	* frame.h: Fix spelling typo

	  Fixes CNG description from "noice" to "noise".

	  ASTERISK-29855 #close

	  Change-Id: Ie7cbbd7d72b426693df7447384ff8700318cd36d

2022-01-18 08:04 +0000 [f17df8c569]  George Joseph <gjoseph@digium.com>

	* bundled_pjproject: Fix srtp detection

	  Reverted recent change that set '--with-external-srtp' instead
	  of '--without-external-srtp'.  Since Asterisk handles all SRTP,
	  we don't need it enabled in pjproject at all.

	  ASTERISK-29867

	  Change-Id: I2ce1bdd30abd21c062eac8f8fefe9b898787b801

2022-01-11 12:46 +0000 [67a87c01ff]  Naveen Albert <asterisk@phreaknet.org>

	* res_rtp_asterisk: Fix typo in flag test/set

	  The code currently checks to see if an RFC3389
	  warning flag is set, except if it is, it merely
	  sets the flag again, the logic of which doesn't
	  make any sense.

	  This adjusts the if comparison to check if the
	  flag has NOT been set, and if so, emit a notice
	  log event and set the flag so that future frames
	  do not cause an event to be logged.

	  ASTERISK-29856 #close

	  Change-Id: Ib7098c947c63537d087a03b4646199fbb963f8e1

2022-01-10 07:44 +0000 [9e975d4c18]  George Joseph <gjoseph@digium.com>

	* res_pjsip: Make message_filter and session multipart aware

	  Neither pjsip_message_filter's filter_on_tx_message() nor
	  res_pjsip_session's session_outgoing_nat_hook() were multipart
	  aware and just assumed that an SDP would be the only thing in
	  a message body.  Both were changed to use the new
	  pjsip_get_sdp_info() function which searches for an sdp in
	  both single- and multi- part message bodies.

	  ASTERISK-29813

	  Change-Id: I8f5b8cfdc27f1d4bd3e7491ea9090951a4525c56

2022-01-12 11:12 +0000 [5fdf6e4e18]  George Joseph <gjoseph@digium.com>

	* build: Fix issues building pjproject

	  The change to allow easier hacking on bundled pjproject created
	  a few issues:

	  * The new Makefile was trying to run the bundled make even if
	    PJPROJECT_BUNDLED=no.  third-party/Makefile now checks for
	    PJPROJECT_BUNDLED and JANSSON_BUNDLED and skips them if they
	    are "no".

	  * When building with bundled, config_site.h was being copied
	    only if a full make or a "make main" was done.  A "make res"
	    would fail all the pjsip modules because they couldn't find
	    config_site.h.  The Makefile now copies config_site.h and
	    asterisk_malloc_debug.h into the pjproject source tree
	    when it's "configure" is performed.  This is how it used
	    to be before the big change.

	  ASTERISK-29858

	  Change-Id: I9427264fa3cb8b3f59a95e5f9693eac236a6f76d

2022-01-06 13:05 +0000 [2f2af26e96]  George Joseph <gjoseph@digium.com>

	* res_pjsip: Add utils for checking media types

	  Added two new functions to assist checking media types...

	  * ast_sip_are_media_types_equal compares two pjsip_media_types.
	  * ast_sip_is_media_type_in tests if one media type is in a list
	    of others.

	  Added static definitions for commonly used media types to
	  res_pjsip.h.

	  Changed several modules to use the new functions and static
	  definitions.

	  ASTERISK_29813
	  (not ready to close)

	  Change-Id: Ief77675235bd3bf00a6b095d4673fd878d0801b9

2022-01-12 13:20 +0000 [96c2a7932d]  Sean Bright <sean.bright@gmail.com>

	* say.c: Prevent erroneous failures with 'say' family of functions.

	  A regression was introduced in ASTERISK~29531 that caused 'say'
	  functions to fail with file lists that would previously have
	  succeeded. This caused affected channels to hang up where previously
	  they would have continued.

	  We now explicitly check for the empty string to restore the previous
	  behavior.

	  ASTERISK-29859 #close

	  Change-Id: Ia2e5769868e2792313c2d7c07996efe009c6f8d5

2022-01-12 07:16 +0000 [6dbed99435]  George Joseph <gjoseph@digium.com>

	* bundled_pjproject: Create generic pjsip_hdr_find functions

	  pjsip_msg_find_hdr(), pjsip_msg_find_hdr_by_name(), and
	  pjsip_msg_find_hdr_by_names() require a pjsip_msg to be passed in
	  so if you need to search a header list that's not in a pjsip_msg,
	  you have to do it yourself.  This commit adds generic versions of
	  those 3 functions that take in the actual header list head instead
	  of a pjsip_msg so if you need to search a list of headers in
	  something like a pjsip_multipart_part, you can do so easily.

	  Change-Id: I6f2c127170eafda48e5e0d5d4d187bcd52b4df07

2022-01-08 14:35 +0000 [902c70530c]  Naveen Albert <asterisk@phreaknet.org>

	* documentation: Document built-in system and channel vars

	  Documentation for built-in special system and channel
	  vars is currently outdated, and updating is a manual
	  process since there is no XML documentation for these
	  anywhere.

	  This adds documentation for system vars to func_env
	  and for channel vars to func_channel so that they
	  appear along with the corresponding fields that would
	  be accessed using a function.

	  ASTERISK-29848 #close

	  Change-Id: I6997f925c4a45fffe71321861f5898a8b7182fa9

2022-01-08 09:09 +0000 [1859388341]  Naveen Albert <asterisk@phreaknet.org>

	* pbx_variables: add missing ASTSBINDIR variable

	  Every config variable in the directories
	  section of asterisk.conf currently has a
	  counterpart built-in variable containing
	  the value of the config option, except
	  for the last one, astsbindir, which should
	  have an ASTSBINDIR variable.

	  However, the actual corresponding ASTSBINDIR
	  variable is missing in pbx_variables.c.

	  This adds the missing variable so that all
	  the config options have their corresponding
	  variable.

	  ASTERISK-29847 #close

	  Change-Id: I36006faf471825b36ebc8aa5e87a3bcb38d446fc

2021-11-30 16:35 +0000 [d014cedf5d]  George Joseph <gjoseph@digium.com>

	* bundled_pjproject:  Make it easier to hack

	  There are times when you need to troubleshoot issues with bundled
	  pjproject or add new features that need to be pushed upstream
	  but...

	  * The source directory created by extracting the pjproject tarball
	    is not scanned for code changes so you have to keep forcing
	    rebuilds.
	  * The source directory isn't a git repo so you can't easily create
	    patches, do git bisects, etc.
	  * Accidentally doing a make distclean will ruin your day by wiping
	    out the source directory, and your changes.
	  * etc.

	  This commit makes that easier.
	  See third-party/pjproject/README-hacking.md for the details.

	  ASTERISK-29824

	  Change-Id: Idb1251040affdab31d27cd272dda68676da9b268

2021-12-24 10:26 +0000 [6060b9ccb0]  Sean Bright <sean.bright@gmail.com>

	* utils.c: Remove all usages of ast_gethostbyname()

	  gethostbyname() and gethostbyname_r() are deprecated in favor of
	  getaddrinfo() which we use in the ast_sockaddr family of functions.

	  ASTERISK-29819 #close

	  Change-Id: Ie277c0ef768d753b169c121ef570a71665692ab7

2021-12-13 09:53 +0000 [75b9b93ca3]  Naveen Albert <asterisk@phreaknet.org>

	* say.conf: fix 12pm noon logic

	  Fixes 12pm noon incorrectly returning 0/a.m.
	  Also fixes a misspelling typo in the config.

	  ASTERISK-29695 #close

	  Change-Id: Ie40f9618636eb4c483b449bd707a5dcffca5c406

2022-01-04 08:08 +0000 [85881d84dc]  Sean Bright <sean.bright@gmail.com>

	* pjproject: Fix incorrect unescaping of tokens during parsing

	  ASTERISK-29664 #close

	  Change-Id: I29dcde52e9faeaf2609c604eada61c6a9e49d8f5

2021-12-30 07:02 +0000 [ac9607d03b]  Mark Petersen <bugs.digium.com@zombie.dk>

	* app_queue.c: Support for Nordic syntax in announcements

	  adding support for playing the correct en/et for nordic languages
	  by adding 'n' for neuter gender in the relevant ast_say_number

	  ASTERISK-29827

	  Change-Id: I03ebc827d2f0dc95132ab2f42799893c70edc5b1

2021-12-23 08:50 +0000 [57d5964d77]  Naveen Albert <asterisk@phreaknet.org>

	* dsp: Add define macro for DTMF_MATRIX_SIZE

	  Adds the macro DTMF_MATRIX_SIZE to replace
	  the magic number 4 sprinkled throughout
	  dsp.c.

	  ASTERISK-29815 #close

	  Change-Id: Ie3bddb92c6b16204ece0f758009e9490eb33b9ba

2022-01-03 11:10 +0000 [06eff7d5d0]  Naveen Albert <asterisk@phreaknet.org>

	* ami: Add AMI event for Wink

	  Adds an AMI event for a wink frame.

	  ASTERISK-29830 #close

	  Change-Id: I83e426de5e37baed79a4dbcc91e9e8d030ef1b56

2021-12-15 08:23 +0000 [ef00ff4e1e]  Naveen Albert <asterisk@phreaknet.org>

	* cli: Add module refresh command

	  Adds a command to the CLI to unload and then
	  load a module. This makes it easier to perform
	  these operations which are often done
	  subsequently to load a new version of a module.

	  "module reload" already refers to reloading of
	  configuration, so the name "refresh" is chosen
	  instead.

	  ASTERISK-29807 #close

	  Change-Id: I595f6f11774a0de2565a1fba38da22309ce93a2c

2022-01-02 19:13 +0000 [dc5d70f29b]  Naveen Albert <asterisk@phreaknet.org>

	* app_mp3: Throw warning on nonexistent stream

	  Currently, the MP3Player application doesn't
	  emit a warning if attempting to play a stream
	  which no longer exists. This can be a common
	  scenario as many mp3 streams are valid at some
	  point but can disappear at any time.

	  Now a warning is thrown if attempting to play
	  a nonexistent MP3 stream, instead of silently
	  exiting.

	  ASTERISK-29829 #close

	  Change-Id: I53a0bf1ed1740166655eb66fe7675f6f808bf535

2021-12-13 08:29 +0000 [6eeb7ab7d0]  Naveen Albert <asterisk@phreaknet.org>

	* documentation: Add missing AMI documentation

	  Adds missing documentation for some channel,
	  bridge, and queue events.

	  ASTERISK-24427
	  ASTERISK-29515

	  Change-Id: I92b06b88c8cadc0155f95ebe3e870b3e795a8c64

2021-11-15 16:13 +0000 [a3fcda5a05]  Kevin Harwell <kharwell@sangoma.com>

	* tcptls.c: refactor client connection to be more robust

	  The current TCP client connect code, blocks and does not handle EINTR
	  error case.

	  This patch makes the client socket non-blocking while connecting,
	  ensures a connect does not immediately fail due to EINTR "errors",
	  and adds a connect timeout option.

	  The original client start call sets the new timeout option to
	  "infinite", thus making sure old, orginal behavior is retained.

	  ASTERISK-29746 #close

	  Change-Id: I907571843a83e43c0742b95a64785f4411f02671

2021-12-13 10:59 +0000 [2ed004846a]  Naveen Albert <asterisk@phreaknet.org>

	* app_sf: Add full tech-agnostic SF support

	  Adds tech-agnostic support for SF signaling
	  by adding SF sender and receiver applications
	  as well as Dial integration.

	  ASTERISK-29802 #close

	  Change-Id: I7ec50752e9a661af639425e5d1e339f17411bcad

2021-12-15 06:23 +0000 [076d502694]  Steve Davies <steve@one47.co.uk>

	* app_queue: Fix hint updates, allow dup. hints

	  A previous patch for ASTERISK_29578 caused a 'leak' of
	  extension state information across queues, causing the
	  state of the first member of unrelated queues to be
	  updated in addition to the correct member. Which queues
	  and members depended on the order of queues in the
	  iterator.

	  Additionally, it is possible to use the same 'hint:' on
	  multiple queue members, so the update cannot break out
	  of the update loop early when a match is found.

	  ASTERISK-29806 #close

	  Change-Id: If2c1d1cc2a752afd9286d79710fc818596e7a7ad

2021-12-23 15:57 +0000 [3f398c319f]  Sean Bright <sean.bright@gmail.com>

	* say.c: Honor requests for DTMF interruption.

	  SayAlpha, SayAlphaCase, SayDigits, SayMoney, SayNumber, SayOrdinal,
	  and SayPhonetic all claim to allow DTMF interruption if the
	  SAY_DTMF_INTERRUPT channel variable is set to a truthy value, but we
	  are failing to break out of a given 'say' application if DTMF actually
	  occurs.

	  ASTERISK-29816 #close

	  Change-Id: I6a96e0130560831d2cb45164919862b9bcb6287e

2021-12-27 07:28 +0000 [a363153fa8]  Joshua C. Colp <jcolp@sangoma.com>

	* bridge: Unlock channel during Local peer check.

	  It's not safe to keep the channel locked while locking
	  the peer Local channel, as it can result in a deadlock.

	  This change unlocks it during this time but keeps the
	  bridge locked to ensure nothing changes about the bridge.

	  ASTERISK-29821

	  Change-Id: Ib68eb7037e5a479bcc2aceee77337cdde1fbdde6

2021-11-07 09:32 +0000 [d8d4ac87a5]  Josh Soref <jsoref@gmail.com>

	* test_time.c: Tolerate DST transitions

	  When test_timezone_watch runs very near a DST transition,
	  two time zones that would otherwise be expected to report the same
	  time can differ because of the DST transition.

	  Instead of having the test fail when this happens, report the
	  times, time zones, and dst flags.

	  ASTERISK-29722

	  Change-Id: Id59bdac8b277e14343ccdf0c99b89e92f79f316a

2021-12-14 11:39 +0000 [f2cfce147b]  George Joseph <gjoseph@digium.com>

	* bundled_pjproject:  Add more support for multipart bodies

	  Adding upstream patch for pull request...
	  https://github.com/pjsip/pjproject/pull/2920
	  ---------------------------------------------------------------

	  sip_inv:  Additional multipart support (#2919)

	  sip_inv.c:inv_check_sdp_in_incoming_msg() deals with multipart
	  message bodies in rdata correctly. In the case where early media is
	  involved though, the existing sdp has to be retrieved from the last
	  tdata sent in this transaction. This, however, always assumes that
	  the sdp sent is in a non-multipart body. While there's a function
	  to retrieve the sdp from multipart and non-multpart rdata bodies,
	  no similar function for tdata exists.  So...

	  * The existing pjsip_rdata_get_sdp_info2 was refactored to
	    find the sdp in any body, multipart or non-multipart, and
	    from either an rdata or tdata.  The new function is
	    pjsip_get_sdp_info.  This new function detects whether the
	    pjsip_msg->body->data is the text representation of the sdp
	    from an rdata or an existing pjmedia_sdp_session object
	    from a tdata, or whether pjsip_msg->body is a multipart
	    body containing either of the two sdp formats.

	  * The exsting pjsip_rdata_get_sdp_info and pjsip_rdata_get_sdp_info2
	    functions are now wrappers that get the body and Content-Type
	    header from the rdata and call pjsip_get_sdp_info.

	  * Two new wrappers named pjsip_tdata_get_sdp_info and
	    pjsip_tdata_get_sdp_info2 have been created that get the body
	    from the tdata and call pjsip_get_sdp_info.

	  * inv_offer_answer_test.c was updated to test multipart scenarios.

	  ASTERISK-29804

	  Change-Id: I483c7c3d413280c9e247a96ad581278347f9c71b

2021-12-09 02:55 +0000 [144e4772e4]  Frederic Van Espen <frederic.ve@gmail.com>

	* ast_coredumper: Fix deleting results when output dir is set

	  When OUTPUTDIR is set to another directory and the
	  --delete-results-after is set, the resulting txt files are
	  not deleted.

	  ASTERISK-29794 #close

	  Change-Id: I1c0071f6809a1e3f5cfc455d6eb08378bc0d7286

2021-12-13 16:49 +0000 [ffb98d764c]  Naveen Albert <asterisk@phreaknet.org>

	* pbx_variables: initialize uninitialized variable

	  The variable cp4 in a variable substitution function
	  can potentially be used without being initialized
	  currently. This causes Asterisk to no longer compile.

	  This initializes cp4 to NULL to make the compiler
	  happy.

	  ASTERISK-29803 #close

	  Change-Id: I392579cbb76db2795d5820c9427cf55fbcee9e72

2021-12-08 05:24 +0000 [0dbf313a76]  Mark Petersen <bugs.digium.com@zombie.dk>

	* app_queue.c: added DIALEDPEERNUMBER on outgoing channel

	  added that we set DIALEDPEERNUMBER on the outgoing channels
	  so it is avalible in b(content^extension^line)
	  this add the same behaviour as Dial

	  ASTERISK-29795

	  Change-Id: Icbc589ea2066f0c401a892bf478f6b2fd44e62f6

2021-11-15 15:35 +0000 [b37fd02201]  Kevin Harwell <kharwell@sangoma.com>

	* http.c: Add ability to create multiple HTTP servers

	  Previously, it was only possible to have one HTTP server in Asterisk.
	  With this patch it is now possible to have multiple HTTP servers
	  listening on different addresses.

	  Note, this behavior has only been made available through an API call
	  from within the TEST_FRAMEWORK. Specifically, this feature has been
	  added in order to allow unit test to create/start and stop servers,
	  if one has not been enabled through configuration.

	  Change-Id: Ic5fb5f11e62c019a1c51310f4667b32a4dae52f5

2021-12-12 18:08 +0000 [1e7bcc27df]  Naveen Albert <asterisk@phreaknet.org>

	* app.c: Throw warnings for nonexistent options

	  Currently, Asterisk doesn't throw warnings if options
	  are passed into applications that don't accept them.
	  This can confuse users if they're unaware that they
	  are doing something wrong.

	  This adds an additional check to parse_options so that
	  a warning is thrown anytime an option is parsed that
	  doesn't exist in the parsing application, so that users
	  are notified of the invalid usage.

	  ASTERISK-29801 #close

	  Change-Id: Id029274a57135caca193c913307a63fd75e24679

2021-12-08 12:07 +0000 [ff0b048543]  Mark Petersen <bugs.digium.com@zombie.dk>

	* app_voicemail.c: Support for Danish syntax in VM

	  added support for playing the correct plural sound file
	  dependen on where you have 1 or multipe messages
	  based on the existing SE/NO code

	  ASTERISK-29797

	  Change-Id: I88aa814d02f3772bb80b474204b1ffb26fe438c2

2021-11-17 15:16 +0000 [3c08ce4f72]  Naveen Albert <asterisk@phreaknet.org>

	* configs: Updates to sample configs

	  Includes some minor updates to extensions.conf
	  and iax.conf. In particular, the demonstration
	  of macros in extensions.conf is removed, as
	  Macro is deprecated and will be removed soon.
	  These examples have been replaced with examples
	  demonstrating the usage of Gosub instead.

	  The older exten => ...,n syntax is also mostly
	  replaced with the same keyword to demonstrate the
	  newer, more concise way of defining extensions.

	  IAXTEL no longer exists, so this example is replaced
	  with something more generic.

	  Some documentation is also added to extensions.conf
	  and iax.conf to clarify some of the new expanded
	  encryption capabilities with IAX2.

	  ASTERISK-29758 #close

	  Change-Id: I04fba9671aa1ee9ba1bd5027061f80bbe38e7b46

2021-12-11 20:11 +0000 [216a18b291]  Naveen Albert <asterisk@phreaknet.org>

	* strings: Fix enum names in comment examples

	  The enum values for ast_strsep_flags includes
	  AST_STRSEP_STRIP. However, some comments reference
	  AST_SEP_STRIP, which doesn't exist. This fixes
	  these comments to use the correct value.

	  ASTERISK-29800 #close

	  Change-Id: If7bbd0c0e6226a211d25ddf9d1629347e2674943

2021-11-17 15:39 +0000 [85dc5214e3]  Naveen Albert <asterisk@phreaknet.org>

	* app_sendtext: Add ReceiveText application

	  Adds a ReceiveText application that can be used in
	  conjunction with SendText. Currently, there is no
	  way in Asterisk to receive text in the dialplan
	  (or anywhere else, really). This allows for Asterisk
	  to be the recipient of text instead of just the sender.

	  ASTERISK-29759 #close

	  Change-Id: Ica2c354a42bff69f323a0493d3a7cd0fb129d52d

2021-11-20 14:37 +0000 [3629b7f825]  Naveen Albert <asterisk@phreaknet.org>

	* pbx_variables: Increase parsing capabilities of MSet

	  Currently MSet can only parse a maximum of 24 variables.
	  If more variables are provided to MSet, the 24th variable
	  will simply contain the remainder of the string and the
	  remaining variables thereafter will never get set.

	  This increases the number of variables that can be parsed
	  in one go from 24 to 99. Additionally, documentation is added
	  since this limitation is currently undocumented and is
	  confusing to users who encounter this limitation.

	  ASTERISK-29766 #close

	  Change-Id: I3fe35b462dedec0a452fd9ea7f92c920a3939f16

2021-11-23 20:21 +0000 [1ac89e0875]  Naveen Albert <asterisk@phreaknet.org>

	* chan_sip: Fix crash when accessing RURI before initiating outgoing call

	  Attempting to access ${CHANNEL(ruri)} in a pre-dial handler before
	  initiating an outgoing call will cause Asterisk to crash. This is
	  because a null field is accessed, resulting in an offset from null and
	  subsequent memory access violation.

	  Since RURI is not guaranteed to exist, we now check if the base
	  pointer is non-null before calculating an offset.

	  ASTERISK-29772

	  Change-Id: Icd3b02f07256bbe6615854af5717074087b95a83

2021-10-25 16:19 +0000 [0eaa214be9]  Naveen Albert <asterisk@phreaknet.org>

	* func_json: Adds JSON_DECODE function

	  Adds the JSON_DECODE function for parsing JSON in the
	  dialplan. JSON parsing already exists in the Asterisk
	  core and is used for many different things. This
	  function exposes the basic parsing capability to
	  the user in the dialplan, for instance, in conjunction
	  with CURL for using API responses.

	  ASTERISK-29706 #close

	  Change-Id: Iea60c49a7358dfdc2db60803cdc9a742f808ba2c

2021-12-11 18:45 +0000 [33f0500359]  Sean Bright <sean.bright@gmail.com>

	* CHANGES: Correct reference to configuration file.

	  Change-Id: I22a788ebf11168fff7fbf9ea956ebcd705ab63dd

2021-11-15 15:08 +0000 [bf28c2901d]  Naveen Albert <asterisk@phreaknet.org>

	* pbx: Add variable substitution API for extensions

	  Currently, variable substitution involving dialplan
	  extensions is quite clunky since it entails obtaining
	  the current dialplan location, backing it up, storing
	  the desired variables for substitution on the channel,
	  performing substitution, then restoring the original
	  location.

	  In addition to being clunky, things could also go wrong
	  if an async goto were to occur and change the dialplan
	  location during a substitution.

	  Fundamentally, there's no reason it needs to be done this
	  way, so new API is added to allow for directly passing in
	  the dialplan location for the purposes of variable
	  substitution so we don't need to mess with the channel
	  information anymore. Existing API is not changed.

	  ASTERISK-29745 #close

	  Change-Id: I23273bf27fa0efb64a606eebf9aa8e2f41a065e4

2021-09-21 19:18 +0000 [9eba9f44d6]  Naveen Albert <asterisk@phreaknet.org>

	* app_mf: Add full tech-agnostic MF support

	  Adds tech-agnostic support for MF signaling by adding
	  MF sender and receiver applications as well as Dial
	  integration.

	  ASTERISK-29496-mf #do-not-close

	  Change-Id: I61962b359b8ec4cfd05df877ddf9f5b8f71927a4

2021-12-06 04:25 +0000 [a7688c0216]  Alexander Traud <pabstraud@compuserve.com>

	* xmldoc: Avoid whitespace around value for parameter/required.

	  Otherwise, the value 'false' was not found in the enumerated set of
	  the XML DTD for the XML attribute 'required' in the XML element
	  'parameter'. Therefore, DTD validation of the runtime XML failed.

	  ASTERISK-29790

	  Change-Id: Id13f230ad65a70dd8c2e3ae9ac85d1e841aed03e

2021-12-04 03:05 +0000 [ca64087486]  Alexander Traud <pabstraud@compuserve.com>

	* progdocs: Fix Doxygen left-overs.

	  Change-Id: I5b5cf9c9cbbe00ba8b379a8d162ac67445d39016

2021-12-06 05:17 +0000 [090c56d80c]  Alexander Traud <pabstraud@compuserve.com>

	* xmldoc: Correct definition for XML element 'matchInfo'.

	  ASTERISK-29791

	  Change-Id: I7c656498427fcadd0a5d61a54ff67e6036609725

2021-11-23 08:05 +0000 [b49ae92fe7]  Alexander Traud <pabstraud@compuserve.com>

	* progdocs: Update Makefile.

	  In developer mode, use internal documentation as well.
	  This should produce no warnings. Fix yours!

	  In noisy mode, output all possible warnings of Doxygen.
	  This creates zillion of warnings. Double-check your current module!

	  Any warnings are in the file './doxygen.log'. Beside that, this change
	  avoids deprecated parameters because the configuration file for Doxygen
	  contains only those parameters which differ from the default. This
	  avoids the need to update the file on each run. Furthermore, it adds
	  AST_VECTOR to be expanded. Finally, the default name for that file is
	  Doxyfile. Therefore, let us use that!

	  ASTERISK-26991
	  ASTERISK-20259

	  Change-Id: I4129092a199d5e24c319a09cd088614b121015af

2021-12-03 07:38 +0000 [65387cd442]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip_sdp_rtp: Do not warn on unknown sRTP crypto suites.

	  res_sdp_crypto_parse_offer(.) emits many log messages already.

	  ASTERISK-29785

	  Change-Id: I1a191ebe4fec1102946d4e31887e5197ca02dfe8

2021-11-30 14:16 +0000 [00c3d60881]  Sean Bright <sean.bright@gmail.com>

	* channel: Short-circuit ast_channel_get_by_name() on empty arg.

	  We know that passing a NULL or empty argument to
	  ast_channel_get_by_name() will never result in a matching channel and
	  will always result in an error being emitted, so just short-circuit
	  out in that case.

	  ASTERISK-28219 #close

	  Change-Id: I88eadc748e9c6996fc17467b0a05881bbfd00bce

2021-10-26 16:12 +0000 [a64129943b]  Mike Bradeen <mbradeen@sangoma.com>

	* res_rtp_asterisk: Addressing possible rtp range issues

	  res/res_rtp_asterisk.c: Adding 1 to rtpstart if it is deteremined
	  that rtpstart was configured to be an odd value. Also adding a loop
	  counter to prevent a possible infinite loop when looking for a free
	  port.

	  ASTERISK-27406

	  Change-Id: I90f07deef0716da4a30206e9f849458b2dbe346b

2021-08-24 13:10 +0000 [caa12fecb1]  Mark Petersen <bugs.digium.com@zombie.dk>

	* apps/app_dial.c: HANGUPCAUSE reason code for CANCEL is set to AST_CAUSE_NORMAL_CLEARING

	  changed that when we recive a CANCEL that we set HANGUPCAUSE to AST_CAUSE_NORMAL_CLEARING

	  ASTERISK-28053
	  Reported by: roadkill

	  Change-Id: Ib653aec2282f55b59d87484391cc07c8e6612b89

2021-11-19 03:11 +0000 [14736ae6d4]  Alexander Traud <pabstraud@compuserve.com>

	* res: Fix for Doxygen.

	  These are the remaining issues found in /res.

	  ASTERISK-29761

	  Change-Id: I572e6019c422780dde5ce8448b6c85c77af6046d

2021-11-08 18:30 +0000 [3162f6dfdd]  Dustin Marquess <jailbird@fdf.net>

	* res_fax_spandsp: Add spandsp 3.0.0+ compatibility

	  Newer versions of spandsp did refactoring of code to add new features
	  like color FAXing. This refactoring broke backwards compatibility.
	  Add support for the new version while retaining support for 0.0.6.

	  ASTERISK-29729 #close

	  Change-Id: I3bd74550604ebcf0304528d647fa39abc62fbaa1

2021-11-19 11:03 +0000 [37c29b6a28]  Alexander Traud <pabstraud@compuserve.com>

	* main: Fix for Doxygen.

	  ASTERISK-29763

	  Change-Id: Ib8359e3590a9109eb04a5376559d040e5e21867e

2021-12-02 18:07 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.23.0-rc1 Released.

2021-12-02 11:55 +0000 [191b92a69e]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.23.0
2021-11-28 04:29 +0000 [3489f926e7]  Alexander Traud <pabstraud@compuserve.com>

	* progdocs: Fix for Doxygen, the hidden parts.

	  ASTERISK-29779

	  Change-Id: If338163488498f65fa7248b60e80299c0a928e4b

2021-11-12 10:26 +0000 [0398daf4cb]  Alexander Traud <pabstraud@compuserve.com>

	* progdocs: Fix grouping for latest Doxygen.

	  Since Doxygen 1.8.16, a special comment block is required. Otherwise
	  (pure C comment), the group command is ignored. Additionally, several
	  unbalanced group commands were fixed.

	  ASTERISK-29732

	  Change-Id: I780ed8e0e8acdbdd8f8b75fb7baf5ef657af7a3f

2021-11-25 12:41 +0000 [6296f645a2]  Naveen Albert <asterisk@phreaknet.org>

	* documentation: Standardize examples

	  Most examples in the XML documentation use the
	  example tag to demonstrate examples, which gets
	  parsed specially in the Wiki to make it easier
	  to follow for users.

	  This fixes a few modules to use the example
	  tag instead of vanilla para tags to bring them
	  in line with the standard syntax.

	  ASTERISK-29777 #close

	  Change-Id: I9acb6cc5faf1d220e73c6dd28592371d768d279b

2021-11-28 14:52 +0000 [1dce155f07]  Sean Bright <sean.bright@gmail.com>

	* config.c: Prevent UB in ast_realtime_require_field.

	  A backend's implementation of the realtime 'require' function may call
	  va_arg() and then fail, leaving the va_list in an undefined
	  state. Pass a copy of the va_list instead.

	  ASTERISK-29771 #close

	  Change-Id: I555565a72af84e96d49f62fe8cb66ba5a78461f4

2021-11-01 10:40 +0000 [14c2121243]  Naveen Albert <asterisk@phreaknet.org>

	* app_voicemail: Refactor email generation functions

	  Refactors generic functions used for email generation
	  into utils.c so that they can be used by multiple
	  modules, including app_voicemail and app_minivm,
	  to avoid code duplication.

	  ASTERISK-29715 #close

	  Change-Id: I1de0ed3483623e9599711129edc817c45ad237ee

2021-11-25 10:34 +0000 [6659f8e192]  Alexander Traud <pabstraud@compuserve.com>

	* stir/shaken: Avoid a compiler extension of GCC.

	  ASTERISK-29776

	  Change-Id: I86e5eca66fb775a5744af0c929fb269e70575a73

2021-11-23 07:45 +0000 [16291d972e]  Alexander Traud <pabstraud@compuserve.com>

	* progdocs: Remove outdated references in doxyref.h.

	  ASTERISK-29773

	  Change-Id: Ica93160d9158cc0e80c5fda829b80d1b49a6b9b9

2021-11-20 06:05 +0000 [17c3a30ff7]  Alexander Traud <pabstraud@compuserve.com>

	* xmldoc: Fix for Doxygen.

	  ASTERISK-29765

	  Change-Id: I654ba0debe8351038d4433716434a09370f04c9d

2021-10-28 02:28 +0000 [0790a67877]  Jaco Kroon <jaco@uls.co.za>

	* logger: use __FUNCTION__ instead of __PRETTY_FUNCTION__

	  This avoids a few long-name overflows, at the cost of less instructive
	  names in the case of C++ (specifically overloaded functions and class
	  methods).  This in turn is offset against the fact that we're logging
	  the filename and line numbers in any case.

	  Change-Id: I54101a0bb5f8cb9ef63ec12c5e0d4c8edafff9ed
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-11-20 04:00 +0000 [5f9c9ba8c3]  Alexander Traud <pabstraud@compuserve.com>

	* chan_misdn: Fix for Doxygen.

	  ASTERISK-29764

	  Change-Id: I6e5466cce03e25695c5c7d8b68c305184dcf5375

2021-11-19 03:46 +0000 [10a0e3d4d6]  Alexander Traud <pabstraud@compuserve.com>

	* channels: Fix for Doxygen.

	  ASTERISK-29762

	  Change-Id: Ia8811ac12b93ff8c18164699c6fbc604cb0a23f7

2021-11-16 16:34 +0000 [abf5085a97]  Mike Bradeen <mbradeen@sangoma.com>

	* astobj2.c: Fix core when ref_log enabled

	  In the AO2_ALLOC_OPT_LOCK_NOLOCK case the referenced obj
	  structure is freed, but is then referenced later if ref_log is
	  enabled. The change is to store the obj->priv_data.options value
	  locally and reference it instead of the value from the freed obj

	  ASTERISK-29730

	  Change-Id: I60cc5dc1f5a4330e7ad56976fc38a42de0ab6072

2021-11-16 04:06 +0000 [42a1d98a13]  Joshua C. Colp <jcolp@sangoma.com>

	* bridge: Deny full Local channel pair in bridge.

	  Local channels are made up of two pairs - the 1 and 2
	  sides. When a frame goes in one side, it comes out the
	  other. Back and forth. When both halves are in a
	  bridge this creates an infinite loop of frames.

	  This change makes it so that bridging no longer
	  allows both of these sides to exist in the same
	  bridge.

	  ASTERISK-29748

	  Change-Id: I29928b6de87cd9be996a77daccefd7c360fef651

2021-11-06 18:35 +0000 [876e647232]  Naveen Albert <asterisk@phreaknet.org>

	* res_tonedetect: Add call progress tone detection

	  Makes basic call progress tone detection available
	  in a tech-agnostic manner with the addition of the
	  ToneScan application. This can determine if the channel
	  has encountered a busy signal, SIT tones, dial tone,
	  modem, fax machine, etc. A few basic async progress
	  tone detect options are also added to the TONE_DETECT
	  function.

	  ASTERISK-29720 #close

	  Change-Id: Ia02437e0450473031e294798b8cb421fb8f24e90

2021-11-08 13:59 +0000 [2534cb34e4]  Boris P. Korzun <drtr0jan@yandex.ru>

	* rtp_engine: Add type field for JSON RTCP Report stasis messages

	  ASTERISK-29727 #close

	  Change-Id: I2eca8aeb591cb63ac2238d08eab662367453cb82

2021-11-17 02:54 +0000 [d5a088f267]  Alexander Traud <pabstraud@compuserve.com>

	* parking: Fix for Doxygen.

	  ASTERISK-29753

	  Change-Id: I7a61974584f6169502e6860fc711919fe7bbfaa7

2021-11-17 03:24 +0000 [06f7d7f4cc]  Alexander Traud <pabstraud@compuserve.com>

	* odbc: Fix for Doxygen.

	  ASTERISK-29754

	  Change-Id: Ia09eb68d283d201d9a6fbeccfc0efe83fe0502a5

2021-11-17 06:18 +0000 [17d5ef3a94]  Alexander Traud <pabstraud@compuserve.com>

	* res_ari: Fix for Doxygen.

	  ASTERISK-29756

	  Change-Id: I2f1c1eea1c902492b77b74de9950f20ebbb7e758

2021-11-17 04:26 +0000 [97a653518d]  Alexander Traud <pabstraud@compuserve.com>

	* frame: Fix for Doxygen.

	  ASTERISK-29755

	  Change-Id: I8240013ec3db0669c0acf67e26bf6c9cbb5b72af

2021-11-17 05:43 +0000 [e3c2288432]  Alexander Traud <pabstraud@compuserve.com>

	* ari-stubs: Avoid 'is' as comparism with an literal.

	  Python 3.9.7 gave a syntax warning.

	  Change-Id: I3e3a982fe720726bc0015bcdb0e638a626ec89d4

2021-11-08 10:08 +0000 [5221b321fd]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Consistently allow 'ye' even for Jansson.

	  Furthermore, consistently use not 'No' but ':' for non-existent file
	  paths. Finally, use the same pattern for checking file paths:
	    a)  = ":"
	    b) != "x:"

	  Change-Id: I0c80c76d2cc98b0e5c859131290f4e3141a1a544

2021-11-16 12:22 +0000 [ed851cbba8]  Alexander Traud <pabstraud@compuserve.com>

	* channel: Fix for Doxygen.

	  ASTERISK-29751

	  Change-Id: Ie04da5029c57ebee44733bdf05013156abe80176

2021-11-16 11:00 +0000 [6b0cee202b]  Alexander Traud <pabstraud@compuserve.com>

	* stasis: Fix for Doxygen.

	  ASTERISK-29750

	  Change-Id: Iea50173e785b2e9d49bc24c0af7111cfd96d44a9

2021-11-17 02:30 +0000 [773a60cda6]  Alexander Traud <pabstraud@compuserve.com>

	* app: Fix for Doxygen.

	  ASTERISK-29752

	  Change-Id: If40cbd01d47a6cfd620b18206dedb8460216c8af

2021-11-16 06:51 +0000 [5689143827]  Alexander Traud <pabstraud@compuserve.com>

	* res_xmpp: Fix for Doxygen.

	  ASTERISK-29749

	  Change-Id: I7885793b63bdeaa883e76edb899bbba9660eb1c5

2021-11-13 06:04 +0000 [c29bf45863]  Alexander Traud <pabstraud@compuserve.com>

	* chan_iax2: Fix for Doxygen.

	  ASTERISK-29737

	  Change-Id: I282003cc553989fd5c19ceeac9e478fa4ee06cec

2021-11-16 04:59 +0000 [2dd2bfe146]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip: Fix for Doxygen.

	  ASTERISK-29747

	  Change-Id: Ic7a1e9453f805a6264fe86c96b7d18b87b376084

2021-11-15 08:12 +0000 [ed8d5dfb27]  Alexander Traud <pabstraud@compuserve.com>

	* bridges: Fix for Doxygen.

	  ASTERISK-29743

	  Change-Id: I6e1bbbaa5875e19994a328ab40a5d429c6010e8b

2021-11-15 07:38 +0000 [ea42985301]  Alexander Traud <pabstraud@compuserve.com>

	* addons: Fix for Doxygen.

	  ASTERISK-29742

	  Change-Id: Ie752cb9638ced1ebe3a55d710c6c18ef6bd0aafc

2021-11-15 07:29 +0000 [ebc404fb8c]  Alexander Traud <pabstraud@compuserve.com>

	* tests: Fix for Doxygen.

	  ASTERISK-29741

	  Change-Id: I012d72b237bda2ef2d0f86307dfc6dc7add4b54b

2021-11-15 07:18 +0000 [07e4c686cc]  Alexander Traud <pabstraud@compuserve.com>

	* apps: Fix for Doxygen.

	  ASTERISK-29740

	  Change-Id: Icb6fbcfea0a5f1c82caa5001902b6a786adbf307

2021-11-13 04:40 +0000 [94d8d124fe]  Alexander Traud <pabstraud@compuserve.com>

	* bridge_channel: Fix for Doxygen.

	  ASTERISK-29736

	  Change-Id: Ia5370289e6526001a6b52754b533bcea1a9d7e5c

2021-11-12 12:53 +0000 [79cb1cdb65]  Alexander Traud <pabstraud@compuserve.com>

	* progdocs: Avoid 'name' with Doxygen \file.

	  Fixes one misuse of the parameter 'name'. Additionally, for
	  consistency and to avoid such an issue in future, those few other
	  places, which used '\file name', were changed just to '\file'. Then,
	  Doxygen uses the name of the current file.

	  ASTERISK-29733

	  Change-Id: I1a915713d39223b03532549e6c16a98cefb4fc23

2021-11-12 13:17 +0000 [94575f9a9a]  Alexander Traud <pabstraud@compuserve.com>

	* progdocs: Use Doxygen \example correctly.

	  ASTERISK-29734

	  Change-Id: I83b51e85cd71867645ab3a8a820f8fd1f065abd2

2021-11-12 13:52 +0000 [c73901308f]  Alexander Traud <pabstraud@compuserve.com>

	* progdocs: Avoid multiple use of section labels.

	  ASTERISK-29735

	  Change-Id: I56935e73f7bd1d4ae2721d11040f4835da64b810

2021-10-30 20:04 +0000 [10384133f4]  Josh Soref <jsoref@users.noreply.github.com>

	* bridges: Spelling fixes

	  Correct typos of the following word families:

	  multiplication
	  potentially
	  iteration
	  interaction
	  virtual
	  synthesis
	  convolve
	  initializes
	  overlap

	  ASTERISK-29714

	  Change-Id: Ia40f1aca8f2996ab407c6ed9d24cb10a67c6684b
	  (cherry picked from commit 2a8fb4695ef87c363fc49f142b696ceed85a7f98)

2021-11-15 13:02 +0000 [a9e2d9b5f1]  Naveen Albert <asterisk@phreaknet.org>

	* app_morsecode: Fix deadlock

	  Fixes a deadlock in app_morsecode caused by locking
	  the channel twice when reading variables from the
	  channel. The duplicate lock is simply removed.

	  ASTERISK-29744 #close

	  Change-Id: I204000701f123361d7f85e0498fedc90243c75e4

2021-10-25 12:51 +0000 [ac2c984f22]  Naveen Albert <asterisk@phreaknet.org>

	* app_read: Fix custom terminator functionality regression

	  Currently, when the t option is specified with no arguments,
	  the # character is still treated as a terminator, even though
	  no character should be treated as a terminator.

	  This is because a previous regression fix was modified to
	  remove the use of NULL as a default altogether. However,
	  NULL and an empty string actually refer to different
	  arrangements and should be treated differently. NULL is the
	  default terminator (#), while an empty string removes the
	  terminator altogether. This is the behavior being used by
	  the rest of the core.

	  Additionally, since S_OR catches empty strings as well as
	  NULL (not intended), this is changed to a ternary operator
	  instead, which fixes the behavior.

	  ASTERISK-29705 #close

	  Change-Id: I9b6b72196dd04f5b1e0ab5aa1b0adf627725e086

2021-10-24 13:38 +0000 [406e8af300]  Naveen Albert <asterisk@phreaknet.org>

	* res_pjsip_callerid: Fix OLI parsing

	  Fix parsing of ANI2/OLI information, since it was previously
	  parsing the user, when it should have been parsing other_param.

	  Also improves the parsing by using pjproject native functions
	  rather than trying to parse the parameters ourselves like
	  chan_sip did. A previous attempt at this caused a crash, but
	  this works correctly now.

	  ASTERISK-29703 #close

	  Change-Id: I8f3c79032d9ea1a21d16f8e11f22bd8d887738a1

2021-10-30 20:04 +0000 [7ee6f515f9]  Josh Soref <jsoref@users.noreply.github.com>

	* rest-api-templates: Spelling fixes

	  Correct typos of the following word families:

	  overwritten
	  descendants

	  ASTERISK-29714

	  Change-Id: I2307e35887a3437e50317a4b86f0893f25f9fd3b

2021-10-30 20:04 +0000 [9aa88723e3]  Josh Soref <jsoref@users.noreply.github.com>

	* funcs: Spelling fixes

	  Correct typos of the following word families:

	  effectively
	  emitted
	  expect
	  anthony

	  ASTERISK-29714

	  Change-Id: Ic16f9ec855bb6d14ec8e170b90af9a36b06d488a

2021-10-30 20:04 +0000 [923f5ee308]  Josh Soref <jsoref@users.noreply.github.com>

	* utils: Spelling fixes

	  Correct typos of the following word families:

	  command-line
	  immediately
	  extensions
	  momentarily
	  mustn't
	  numbered
	  bytes
	  caching

	  ASTERISK-29714

	  Change-Id: I8b2b125c5d4d2f9e87a58515c97468ad47ca44f8

2021-10-30 20:04 +0000 [ec31cf02fc]  Josh Soref <jsoref@users.noreply.github.com>

	* CREDITS: Spelling fixes

	  Correct typos of the following word families:

	  contributors

	  ASTERISK-29714

	  Change-Id: I6f46dae8bf8125a21ce8ff318380b2b412d9d2f9

2021-10-30 20:04 +0000 [5d1e3cb17f]  Josh Soref <jsoref@users.noreply.github.com>

	* doc: Spelling fixes

	  Correct typos of the following word families:

	  transparent
	  roughly

	  ASTERISK-29714

	  Change-Id: I2b90c68dfde4aa3f0d58f64f8187465336acb1b3

2021-10-30 20:04 +0000 [4aadd5573d]  Josh Soref <jsoref@users.noreply.github.com>

	* build_tools: Spelling fixes

	  Correct typos of the following word families:

	  binutils

	  ASTERISK-29714

	  Change-Id: I2f676ab48cd50edc400c43307cb53679e4c09b97

2021-10-30 20:04 +0000 [ebd56c8bf3]  Josh Soref <jsoref@users.noreply.github.com>

	* apps: Spelling fixes

	  Correct typos of the following word families:

	  simultaneously
	  administrator
	  directforward
	  attachfmt
	  dailplan
	  automatically
	  applicable
	  nouns
	  explicit
	  outside
	  sponsored
	  attachment
	  audio
	  spied
	  doesn't
	  counting
	  encoded
	  implements
	  recursively
	  emailaddress
	  arguments
	  queuerules
	  members
	  priority
	  output
	  advanced
	  silencethreshold
	  brazilian
	  debugging
	  argument
	  meadmin
	  formatting
	  integrated
	  sneakiness

	  ASTERISK-29714

	  Change-Id: Ie5ecaec91c00b26309da4e51cfc0991a5bb7d092

2021-10-30 20:04 +0000 [e3dfd4c097]  Josh Soref <jsoref@users.noreply.github.com>

	* menuselect: Spelling fixes

	  Correct typos of the following word families:

	  dependency
	  unless
	  random
	  dependencies
	  delimited
	  randomly
	  modules

	  ASTERISK-29714

	  Change-Id: I3920603a8dc7c0a1852d2f885e06b1144692d40e

2021-10-30 20:04 +0000 [d887c9fb5b]  Josh Soref <jsoref@users.noreply.github.com>

	* CHANGES: Spelling fixes

	  Correct typos of the following word families:

	  issuing
	  execution
	  bridging
	  alert
	  respective
	  unlikely
	  confbridge
	  offered
	  negotiation
	  announced
	  engineer
	  systems
	  inherited
	  passthrough
	  functionality
	  supporting
	  conflicts
	  semantically
	  monitor
	  specify
	  specifiable

	  ASTERISK-29714

	  Change-Id: Ia6b1cf634f52c5f7b1b8769dc54dae78106ed98c

2021-10-30 20:04 +0000 [e5d4de1f3f]  Josh Soref <jsoref@users.noreply.github.com>

	* include: Spelling fixes

	  Correct typos of the following word families:

	  activities
	  forward
	  occurs
	  unprepared
	  association
	  compress
	  extracted
	  doubly
	  callback
	  prometheus
	  underlying
	  keyframe
	  continue
	  convenience
	  calculates
	  ignorepattern
	  determine
	  subscribers
	  subsystem
	  synthetic
	  applies
	  example
	  manager
	  established
	  result
	  microseconds
	  occurrences
	  unsuccessful
	  accommodates
	  related
	  signifying
	  unsubscribe
	  greater
	  fastforward
	  itself
	  unregistering
	  using
	  translator
	  sorcery
	  implementation
	  serializers
	  asynchronous
	  unknowingly
	  initialization
	  determining
	  category
	  these
	  persistent
	  propagate
	  outputted
	  string
	  allocated
	  decremented
	  second
	  cacheability
	  destructor
	  impaired
	  decrypted
	  relies
	  signaling
	  based
	  suspended
	  retrieved
	  functions
	  search
	  auth
	  considered

	  ASTERISK-29714

	  Change-Id: I542ce887a16603f886a915920d5710d4a0a1358d

2021-10-30 20:04 +0000 [aa98237e46]  Josh Soref <jsoref@users.noreply.github.com>

	* tests: Spelling fixes

	  Correct typos of the following word families:

	  mounting
	  jitterbuffer
	  thrashing
	  original
	  manipulating
	  entries
	  actual
	  possibility
	  tasks
	  options
	  positives
	  taskprocessor
	  other
	  dynamic
	  declarative

	  ASTERISK-29714

	  Change-Id: I6b94659d045eec5d8d020fce2e9b6e2f593dfeb6

2021-10-30 20:04 +0000 [4dd7ae3962]  Josh Soref <jsoref@users.noreply.github.com>

	* contrib: Spelling fixes

	  Correct typos of the following word families:

	  standard
	  increase
	  comments
	  valgrind
	  promiscuous
	  editing
	  libtonezone
	  storage
	  aggressive
	  whitespace
	  russellbryant
	  consecutive
	  peternixon

	  ASTERISK-29714

	  Change-Id: I9cafbf41b579c9c0c84c81719d2c4f900beec245

2021-10-30 20:04 +0000 [76c043a48c]  Josh Soref <jsoref@users.noreply.github.com>

	* configs: Spelling fixes

	  Correct typos of the following word families:

	  password
	  excludes
	  undesirable
	  checksums
	  through
	  screening
	  interpreting
	  database
	  causes
	  initiation
	  member
	  busydetect
	  defined
	  severely
	  throughput
	  recognized
	  counter
	  require
	  indefinitely
	  accounts

	  ASTERISK-29714

	  Change-Id: Ie8f2a7b274a162dd627ee6a2165f5e8a3876527e

2021-10-30 20:04 +0000 [c99df39b03]  Josh Soref <jsoref@users.noreply.github.com>

	* UPGRADE.txt: Spelling fixes

	  Correct typos of the following word families:

	  themselves
	  support
	  received

	  ASTERISK-29714

	  Change-Id: Ibd0a7996d5801c754d3d44fba31fe788a13dba95

2021-10-30 20:04 +0000 [f818f39825]  Josh Soref <jsoref@users.noreply.github.com>

	* pbx: Spelling fixes

	  Correct typos of the following word families:

	  process
	  populate
	  with
	  africa
	  accessing
	  contexts
	  exercise
	  university
	  organizations
	  withhold
	  maintaining
	  independent
	  rotation
	  ignore
	  eventname

	  ASTERISK-29714

	  Change-Id: I90eacc5bc3dcf75a9c898cfb85164f37dec08345

2021-10-30 20:04 +0000 [714018e59a]  Josh Soref <jsoref@users.noreply.github.com>

	* formats: Spelling fixes

	  Correct typos of the following word families:

	  truncate

	  ASTERISK-29714

	  Change-Id: I6507760c72b919873cff7cac22b3781036cd4955

2021-10-30 20:04 +0000 [47c50aa47e]  Josh Soref <jsoref@users.noreply.github.com>

	* main: Spelling fixes

	  Correct typos of the following word families:

	  analysis
	  nuisance
	  converting
	  although
	  transaction
	  desctitle
	  acquire
	  update
	  evaluate
	  thousand
	  this
	  dissolved
	  management
	  integrity
	  reconstructed
	  decrement
	  further on
	  irrelevant
	  currently
	  constancy
	  anyway
	  unconstrained
	  featuregroups
	  right
	  larger
	  evaluated
	  encumbered
	  languages
	  digits
	  authoritative
	  framing
	  blindxfer
	  tolerate
	  traverser
	  exclamation
	  perform
	  permissions
	  rearrangement
	  performing
	  processing
	  declension
	  happily
	  duplicate
	  compound
	  hundred
	  returns
	  elicit
	  allocate
	  actually
	  paths
	  inheritance
	  atxferdropcall
	  earlier
	  synchronization
	  multiplier
	  acknowledge
	  across
	  against
	  thousands
	  joyous
	  manipulators
	  guaranteed
	  emulating
	  soundfile

	  ASTERISK-29714

	  Change-Id: I926ba4b11e9f6dd3fdd93170ab1f9b997910be70

2021-10-30 20:04 +0000 [f0ad84390a]  Josh Soref <jsoref@users.noreply.github.com>

	* Makefile: Spelling fixes

	  Correct typos of the following word families:

	  libraries
	  install
	  overwrite

	  ASTERISK-29714

	  Change-Id: I6488814f79186d6c23dfd7b7f9bba0a046126174

2021-10-30 20:04 +0000 [3d766cd96b]  Josh Soref <jsoref@users.noreply.github.com>

	* agi: Spelling fixes

	  Correct typos of the following word families:

	  pretend
	  speech

	  ASTERISK-29714

	  Change-Id: I7d0527c329cda07552247ea11b2d7db207a3d87d

2021-10-30 20:04 +0000 [024e0dbc23]  Josh Soref <jsoref@users.noreply.github.com>

	* addons: Spelling fixes

	  Correct typos of the following word families:

	  definition
	  listener
	  fastcopy
	  logical
	  registration
	  classify
	  documentation
	  explicitly
	  dialed
	  endpoint
	  elements
	  arithmetic
	  might
	  prepend
	  byte
	  terminal
	  inquiry
	  skipping
	  aliases
	  calling
	  absent
	  authentication
	  transmit
	  their
	  ericsson
	  disconnecting
	  redir
	  items
	  client
	  adapter
	  transmitter
	  existing
	  satisfies
	  pointer
	  interval
	  supplied

	  ASTERISK-29714

	  Change-Id: I8548438246f7b718d88e0b9e0a1eb384bbec88e4

2021-10-30 20:04 +0000 [1aae1d2215]  Josh Soref <jsoref@users.noreply.github.com>

	* codecs: Spelling fixes

	  Correct typos of the following word families:

	  voiced
	  denumerator
	  codeword
	  upsampling
	  constructed
	  residual
	  subroutine
	  conditional
	  quantizing
	  courtesy
	  number

	  ASTERISK-29714

	  Change-Id: I471fb8086a5277d8f05047fedee22cfa97a4252d

2021-10-30 20:04 +0000 [636d3dc4be]  Josh Soref <jsoref@users.noreply.github.com>

	* channels: Spelling fixes

	  Correct typos of the following word families:

	  appease
	  permanently
	  overriding
	  residue
	  silliness
	  extension
	  channels
	  globally
	  reference
	  japanese
	  group
	  coordinate
	  registry
	  information
	  inconvenience
	  attempts
	  cadence
	  payloads
	  presence
	  provisioning
	  mimics
	  behavior
	  width
	  natively
	  syslabel
	  not owning
	  unquelch
	  mostly
	  constants
	  interesting
	  active
	  unequipped
	  brodmann
	  commanding
	  backlogged
	  without
	  bitstream
	  firmware
	  maintain
	  exclusive
	  practically
	  structs
	  appearance
	  range
	  retransmission
	  indication
	  provisional
	  associating
	  always
	  whether
	  cyrillic
	  distinctive
	  components
	  reinitialized
	  initialized
	  capability
	  switches
	  occurring
	  happened
	  outbound

	  ASTERISK-29714

	  Change-Id: Ife52ee89cd2170b684fa651ca72b1cb911a57339

2021-10-30 20:04 +0000 [923c836886]  Josh Soref <jsoref@users.noreply.github.com>

	* res: Spelling fixes

	  Correct typos of the following word families:

	  identifying
	  structures
	  actcount
	  initializer
	  attributes
	  statement
	  enough
	  locking
	  declaration
	  userevent
	  provides
	  unregister
	  session
	  execute
	  searches
	  verification
	  suppressed
	  prepared
	  passwords
	  recipients
	  event
	  because
	  brief
	  unidentified
	  redundancy
	  character
	  the
	  module
	  reload
	  operation
	  backslashes
	  accurate
	  incorrect
	  collision
	  initializing
	  instance
	  interpreted
	  buddies
	  omitted
	  manually
	  requires
	  queries
	  generator
	  scheduler
	  configuration has
	  owner
	  resource
	  performed
	  masquerade
	  apparently
	  routable

	  ASTERISK-29714

	  Change-Id: I88485116d2c59b776aa2e1f8b4ce8239a21decda

2021-11-08 07:00 +0000 [6bd2fa8511]  George Joseph <gjoseph@digium.com>

	* CI: Rename 'master' node to 'built-in'

	  Jenkins renamed the 'master' node to 'built-in' in version
	  2.319 so we have to adjust as well.

	  Change-Id: Ice663c3a66d0eedf76e8e5fe530328455991ec25

2021-10-24 06:55 +0000 [6d242723bb]  Naveen Albert <asterisk@phreaknet.org>

	* sig_analog: Fix truncated buffer copy

	  Fixes compiler warning caused by a truncated copy of the ANI2 into a
	  buffer of size 10. This could prevent the null terminator from being
	  copied if the copy value exceeds the size of the buffer. This increases
	  the buffer size to 101 to ensure there is no way for truncation to occur.

	  ASTERISK-29702 #close

	  Change-Id: Ief9052212952840fa44de6463b8699fdb3e163d0

2021-11-08 08:08 +0000 [0766023be4]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: In POSIX sh, == in place of = is undefined.

	  ASTERISK-29724

	  Change-Id: I59aa0e52effdc16992f3a736ccf73430a6ef135b

2021-11-08 09:01 +0000 [74ad80609e]  Sean Bright <sean.bright@gmail.com>

	* pbx.c: Don't remove dashes from hints on reload.

	  When reloading dialplan, hints created dynamically would lose any dash
	  characters. Now we ignore those dashes if we are dealing with a hint
	  during a reload.

	  ASTERISK-28040 #close

	  Change-Id: I95e48f5a268efa3c6840ab69798525d3dce91636

2021-10-24 07:31 +0000 [54b41fcfd2]  Naveen Albert <asterisk@phreaknet.org>

	* app_voicemail: Fix phantom voicemail bug on rerecord

	  If users are able to press # for options while leaving
	  a message and then press 3 to rerecord the message, if
	  the caller hangs up during the rerecord prompt but before
	  Asterisk starts recording a message, then an "empty"
	  voicemail gets processed whereby an email gets sent out
	  notifying the user of a 0:00 duration message. The file
	  doesn't actually exist, so playback will fail since there
	  was no message to begin with.

	  This adds a check after the streaming of the rerecord
	  announcement to see if the caller has hung up. If so,
	  we bail out early so that we can clean up properly.

	  ASTERISK-29391 #close

	  Change-Id: Id965d72759a2fd3b39afb76fec08aaebebe75c31

2021-10-25 19:47 +0000 [530e89655e]  Naveen Albert <asterisk@phreaknet.org>

	* chan_iax2: Allow both secret and outkey at dial time

	  Historically, the dial syntax for IAX2 has held that
	  an outkey (used only for RSA authenticated calls)
	  and a secret (used only for plain text and MD5 authenticated
	  calls, historically) were mutually exclusive, and thus
	  the same position in the dial string was used for both
	  values.

	  Now that encryption is possible with RSA authentication,
	  this poses a limitation, since encryption requires a
	  secret and RSA authentication requires an outkey. Thus,
	  the dial syntax is extended so that both a secret and
	  an outkey can be specified.

	  The new extended syntax is backwards compatible with the
	  old syntax. However, a secret can now be specified after
	  the outkey, or the outkey can be specified after the secret.
	  This makes it possible to spawn an encrypted RSA authenticated
	  call without a corresponding peer being predefined in iax.conf.

	  ASTERISK-29707 #close

	  Change-Id: I1f8149313ed760169d604afbb07720a8b07dd00e

2021-10-28 07:09 +0000 [f81c4ff3c9]  Alexander Traud <pabstraud@compuserve.com>

	* res_snmp: As build tool, prefer pkg-config over net-snmp-config.

	  ASTERISK-29709

	  Change-Id: Ie169df878bdfc3a06b3097c5c38d185b480f54d4

2021-10-28 07:41 +0000 [45266c66d5]  Alexander Traud <pabstraud@compuserve.com>

	* stasis: Avoid 'dispatched' as unused variable in normal mode.

	  ASTERISK-29710

	  Change-Id: Ia849f1172e4e694c5d5d7f0cad449f936ee12216

2021-10-29 10:05 +0000 [11f291f6f0]  Sean Bright <sean@seanbright.com>

	* various: Fix GCC 11.2 compilation issues.

	  * Initialize some variables that are never used anyway.

	  * Use valid pointers instead of integers cast to void pointers when
	    calling pthread_setspecific().

	  ASTERISK-29711 #close
	  ASTERISK-29713 #close

	  Change-Id: I8728cd6f2f4b28e0e48113c5da450b768c2a6683

2021-09-09 09:39 +0000 [ecb46511cc]  George Joseph <gjoseph@digium.com>

	* ast_coredumper:  Refactor to better find things

	  The search for a running asterisk when --running is used
	  has been greatly simplified and in the event it doesn't
	  work, you can now specify a pid to use on the command
	  line with --pid.

	  The search for asterisk modules when --tarball-coredumps
	  is used has been enhanced to have a better chance of finding
	  them and in the event it doesn't work, you can now specify
	  --libdir on the command line to indicate the library directory
	  where they were installed.

	  The DATEFORMAT variable was renamed to DATEOPTS and is now
	  passed to the 'date' utility rather than running DATEFORMAT
	  as a command.

	  The coredump and output files are now renamed with DATEOPTS.
	  This can be disabled by specifying --no-rename.

	  Several confusing and conflicting options were removed:
	  --append-coredumps
	  --conffile
	  --no-default-search
	  --tarball-uniqueid

	  The script was re-structured to make it easier for follow.

	  Change-Id: I674be64bdde3ef310b6a551d4911c3b600ffee59

2021-10-21 12:29 +0000 [d112916e98]  Kevin Harwell <kharwell@sangoma.com>

	* strings/json: Add string delimter match, and object create with vars methods

	  Add a function to check if there is an exact match a one string between
	  delimiters in another string.

	  Add a function that will create an ast_json object out of a list of
	  Asterisk variables. An excludes string can also optionally be passed
	  in.

	  Also, add a macro to make it easier to get object integers.

	  Change-Id: I5f34f18e102126aef3997f19a553a266d70d6226

2021-09-21 12:09 +0000 [669e16b3dc]  Ben Ford <bford@digium.com>

	* STIR/SHAKEN: Option split and response codes.

	  The stir_shaken configuration option now has 4 different choices to pick
	  from: off, attest, verify, and on. Off and on behave the same way they
	  do now. Attest will only perform attestation on the endpoint, and verify
	  will only perform verification on the endpoint.

	  Certain responses are required to be sent based on certain conditions
	  for STIR/SHAKEN. For example, if we get a Date header that is outside of
	  the time range that is considered valid, a 403 Stale Date response
	  should be sent. This and several other responses have been added.

	  Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7

2021-08-25 08:15 +0000 [b12e8b5924]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: Add LoginTime field for member in a queue.

	  Add a time_t logintime to storage a time when a member is added into a
	  queue.

	  Also, includes show this time (in seconds) using a 'queue show' command
	  and the field LoginTime for response for AMI events.

	  ASTERISK-18069 #close

	  Change-Id: Ied6c3a300f78d78eebedeb3e16a1520fc3fff190

2021-10-21 12:49 +0000 [04e79fd0e3]  Kevin Harwell <kharwell@sangoma.com>

	* res_speech: Add a type conversion, and new engine unregister methods

	  Add a new function that converts a speech results type to a string.
	  Also add another function to unregister an engine, but returns a
	  pointer to the unregistered engine object instead of a success/fail
	  integer.

	  Change-Id: I0f7de17cb411021c09fb03988bc2b904e1380192

2021-10-07 13:07 +0000 [8031b6c9e6]  Mike Bradeen <mbradeen@sangoma.com>

	* various: Fix GCC 11 compilation issues.

	  test_voicemail_api: Use empty char* for empty_msg_ids.
	  chan_skinny: Fix size of calledParty to be maximum extension.
	  menuselect: Change Makefile to stop deprecated warnings. Added comments
	  test_linkedlist: 'bogus' variable was manually allocated from a macro
	  and the test fails if this happens but the compiler couldn't 'see' this
	  and returns a warning. memset to all 0's after allocation.
	  chan_ooh323: Fixed various indentation issues that triggered misleading
	   indentation warnings.

	  ASTERISK-29682
	  Reported by: George Joseph

	  Change-Id: If4fe42222c8444dc16828a42731ee53b4ce5cbbe

2021-09-20 11:10 +0000 [a68ef6aafd]  Shloime Rosenblum <shloimerosenblum@gmail.com>

	* apps/app_playback.c: Add 'mix' option to app_playback

	  I am adding a mix option that will play by filename and say.conf unlike
	  say option that will only play with say.conf. It
	  will look on the format of the name, if it is like say it play with
	  say.conf if not it will play the file name.

	  ASTERISK-29662

	  Change-Id: I815816916a308f0fa8f165140dc15772dcbd547a

2021-10-19 11:35 +0000 [362b7f2411]  George Joseph <gjoseph@digium.com>

	* BuildSystem: Check for alternate openssl packages

	  OpenSSL is one of those packages that often have alternatives
	  with later versions.  For instance, CentOS/EL 7 has an
	  openssl package at version 1.0.2 but there's an openssl11
	  package from the epel repository that has 1.1.1.  This gets
	  installed to /usr/include/openssl11 and /usr/lib64/openssl11.
	  Unfortunately, the existing --with-ssl and --with-crypto
	  ./configure options expect to point to a source tree and
	  don't work in this situation.  Also unfortunately, the
	  checks in ./configure don't use pkg-config.

	  In order to make this work with the existing situation, you'd
	  have to run...
	  ./configure --with-ssl=/usr/lib64/openssl11 \
	      --with-crypto=/usr/lib64/openssl11 \
	      CFLAGS=-I/usr/include/openssl11

	  BUT...  those options don't get passed down to bundled pjproject
	  so when you run make, you have to include the CFLAGS again
	  which is a big pain.

	  Oh...  To make matters worse, although you can specify
	  PJPROJECT_CONFIGURE_OPTS on the ./configure command line,
	  they don't get saved so if you do a make clean, which will
	  force a re-configure of bundled pjproject, those options
	  don't get used.

	  So...

	  * In configure.ac... Since pkg-config is installed by install_prereq
	    anyway, we now use it to check for the system openssl >= 1.1.0.
	    If that works, great.  If not, we check for the openssl11
	    package. If that works, great.  If not, we fall back to just
	    checking for any openssl.  If pkg-config isn't installed for some
	    reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified
	    on the ./configure command line, we fall back to the existing
	    logic that uses AST_EXT_LIB_CHECK().

	  * The whole OpenSSL check process has been moved up before
	    THIRD_PARTY_CONFIGURE(), which does the initial pjproject
	    bundled configure, is run.  This way the results of the above
	    checks, which may result in new include or library directories,
	    is included.

	  * Although not strictly needed for openssl, We now save the value of
	    PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used
	    again if a re-configure is triggered.

	  ASTERISK-29693

	  Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde

2021-10-14 14:38 +0000 [a4d533d132]  Sean Bright <sean.bright@gmail.com>

	* func_talkdetect.c: Fix logical errors in silence detection.

	  There are 3 separate changes here:

	  1. The documentation erroneously stated that the dsp_talking_threshold
	     argument was a number of milliseconds when it is actually an energy
	     level used by the DSP code to classify talking vs. silence.

	  2. Fixes a copy paste error in the argument handling code.

	  3. Don't erroneously switch to the talking state if we aren't actively
	     handling a frame we've classified as talking.

	  Patch inspired by one provided by Moritz Fain (License #6961).

	  ASTERISK-27816 #close

	  Change-Id: I5953fd570b98b49c41cee55bfe3b941753fb2511

2021-10-14 10:15 +0000 [fe0b5aed7b]  Sebastien Duthil <sduthil@wazo.community>

	* main/stun.c: fix crash upon STUN request timeout

	  Some ast_stun_request users do not provide a destination address when
	  sending to a connection-mode socket.

	  ASTERISK-29691

	  Change-Id: Idd9114c3380216ba48abfc3c68619e79ad37defc

2021-10-11 14:04 +0000 [0c71619f8a]  Sean Bright <sean.bright@gmail.com>

	* configure: Remove unused OpenSSL SRTP check.

	  Discovered while looking at ASTERISK~29684. Usage was removed in change
	  I3c77c7b00b2ffa2e935632097fa057b9fdf480c0.

	  Change-Id: Iaf2f7a16ea5a7eee6375319347e4b40b8e7b10e3

2021-10-12 13:17 +0000 [d553da5c70]  Mike Bradeen <mbradeen@sangoma.com>

	* build: prevent binary downloads for non x86 architectures

	  download_externals: Add check for i686 and i386 (in addition
	  to the current x86_64) and exit if not one of the three.

	  ASTERISK-26497

	  Change-Id: Ia4d429fcefa5b2f5b6e99159d4607de8e8325b2f

2021-10-13 10:24 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.22.0-rc1 Released.

2021-10-13 05:19 +0000 [448739fe63]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.22.0
2021-10-07 12:50 +0000 [b64b120bf5]  Sean Bright <sean.bright@gmail.com>

	* Makefile: Use basename in a POSIX-compliant way.

	  If you aren't using GNU coreutils, chances are that your basename
	  doesn't know about the -s argument. Luckily for us, basename does what
	  we need it do even without the -s argument.

	  Change-Id: I8b81a429bb037b997ee6640ff8a2b5e860962bb7

2021-10-05 19:59 +0000 [4cd2679c5e]  Mark Murawski <markm@intellasoft.net>

	* pbx_ael:  Fix crash and lockup issue regarding 'ael reload'

	  Avoid infinite recursion and crash

	  Change-Id: I8ed05ec3aa2806c50c77edc5dd0cd4e4fa08b3f4

2021-05-24 13:04 +0000 [8ad4cb901b]  Naveen Albert <asterisk@phreaknet.org>

	* chan_iax2: Add encryption for RSA authentication

	  Adds support for encryption to RSA-authenticated
	  calls. Also prevents crashes if an RSA IAX2 call
	  is initiated to a switch requiring encryption
	  but no secret is provided.

	  ASTERISK-20219

	  Change-Id: I18f1f9d7c59b4f9cffa00f3b94a4c875846efd40

2021-07-19 11:34 +0000 [39824c7a96]  Matthew Kern <mkern@alconconstruction.com>

	* res_pjsip_t38: bind UDPTL sessions like RTP

	  In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
	  fallback use of the transport's bind address solve problems sending
	  media on systems that cannot send ipv4 packets on ipv6 sockets, and
	  certain other situations. This change extends both of these behaviors
	  to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
	  problems on these systems, introducing a new option
	  endpoint/t38_bind_udptl_to_media_address.

	  ASTERISK-29402

	  Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557

2021-09-29 12:58 +0000 [7ee4136dcf]  Naveen Albert <asterisk@phreaknet.org>

	* app_read: Fix null pointer crash

	  If the terminator character is not explicitly specified
	  and an indications tone is used for reading a digit,
	  there is no null pointer check so Asterisk crashes.
	  This prevents null usage from occuring.

	  ASTERISK-29673 #close

	  Change-Id: Ie941833e123c3dbfb88371b5de5edbbe065514ac

2021-09-29 04:32 +0000 [0c17fd802b]  Jean Aunis <jean.aunis@prescom.fr>

	* res_rtp_asterisk: fix memory leak

	  Add missing reference decrement in rtp_deallocate_transport()

	  ASTERISK-29671

	  Change-Id: I8d22dbedb90e8dade0829b7a28372f404b07caa9

2021-09-19 15:08 +0000 [e8ad58217f]  Shloime Rosenblum <shloimerosenblum@gmail.com>

	* main/say.c: Support future dates with Q and q format params

	  The current versions do not support future dates in all say application when using the 'Q' or 'q' format parameter and says "today" for everything that is greater than today

	  ASTERISK-29637

	  Change-Id: I1fb1cef0ce3c18d87b1fc94ea309d13bc344af02

2021-07-21 16:36 +0000 [722b81904e]  Joseph Nadiv <ynadiv@corpit.xyz>

	* res_pjsip_registrar: Remove unavailable contacts if exceeds max_contacts

	  The behavior of max_contacts and remove_existing are connected.  If
	  remove_existing is enabled, the soonest expiring contacts are removed.
	  This may occur when there is an unavailable contact.  Similarly,
	  when remove_existing is not enabled, registrations from good
	  endpoints are rejected in favor of retaining unavailable contacts.

	  This commit adds a new AOR option remove_unavailable, and the effect
	  of this setting will depend on remove_existing.  If remove_existing
	  is set to no, we will still remove unavailable contacts when they
	  exceed max_contacts, if there are any. If remove_existing is set to
	  yes, we will prioritize the removal of unavailable contacts before
	  those that are expiring soonest.

	  ASTERISK-29525

	  Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784

2021-09-19 06:14 +0000 [b0027c65f9]  Naveen Albert <asterisk@phreaknet.org>

	* func_vmcount: Add support for multiple mailboxes

	  Allows multiple mailboxes to be specified for VMCOUNT
	  instead of just one.

	  ASTERISK-29661 #close

	  Change-Id: I9108528300795fd5b607efa9d4dd7b74be031813

2021-09-21 09:58 +0000 [97ce647afd]  Sean Bright <sean.bright@gmail.com>

	* message.c: Support 'To' header override with AMI's MessageSend.

	  The MessageSend AMI action has been updated to allow the Destination
	  and the To addresses to be provided separately. This brings the
	  MessageSend manager command in line with the capabilities of the
	  MessageSend dialplan application.

	  ASTERISK-29663 #close

	  Change-Id: I8513168d3e189a9fed88aaab6f5547ccb50d332c

2021-09-15 13:21 +0000 [228c97d3bf]  Naveen Albert <asterisk@phreaknet.org>

	* func_channel: Add CHANNEL_EXISTS function.

	  Adds a function to check for the existence of a channel by
	  name or by UNIQUEID.

	  ASTERISK-29656 #close

	  Change-Id: Ib464e9eb6e13dc683a846286798fecff4fd943cb

2021-09-05 13:11 +0000 [9a427d4f5f]  Naveen Albert <asterisk@phreaknet.org>

	* app_queue: Fix hint updates for included contexts

	  Previously, if custom hints were used with the hint:
	  format in app_queue, when device state changes occured,
	  app_queue would only do a literal string comparison of
	  the context used for the hint in app_queue and the context
	  of the hint which just changed state. This caused hints
	  to not update and become stale if the context associated
	  with the agent included the context which actually changes
	  state, essentially completely breaking device state for
	  any such agents defined in this manner.

	  This fix adds an additional check to ensure that included
	  contexts are also compared against the context which changed
	  state, so that the behavior is correct no matter whether the
	  context is specified to app_queue directly or indirectly.

	  ASTERISK-29578 #close

	  Change-Id: I8caf2f8da8157ef3d9ea71a8568c1eec95592b78

2021-09-10 09:40 +0000 [28d8b9e067]  Sean Bright <sean.bright@gmail.com>

	* res_http_media_cache.c: Compare unaltered MIME types.

	  Rather than stripping parameters from Content-Type headers before
	  comparison, first try to compare the whole string. If no match is
	  found, strip the parameters and try that way.

	  ASTERISK-29275 #close

	  Change-Id: I2963c8ecbb3a9605b78b6421c415108d77a66a0f

2021-07-25 17:19 +0000 [41ba9f5f31]  Naveen Albert <asterisk@phreaknet.org>

	* logger: Add custom logging capabilities

	  Adds the ability for users to log to custom log levels
	  by providing custom log level names in logger.conf. Also
	  adds a logger show levels CLI command.

	  ASTERISK-29529

	  Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702

2021-09-17 10:57 +0000 [d406cc2acd]  Sean Bright <sean.bright@gmail.com>

	* app_externalivr.c: Fix mixed leading whitespace in source code.

	  No functional changes.

	  Change-Id: I46514152c0af67f395526374aaa847ccd6a85378

2021-09-17 14:58 +0000 [5f4d3e2822]  Guido Falsi <madpilot@freebsd.org>

	* res_rtp_asterisk.c: Fix build failure when not building with pjproject.

	  Some code has been added referencing symbols defined in a block
	  protected by #ifdef HAVE_PJPROJECT. Protect those code parts in
	  ifdef blocks too.

	  ASTERISK-29660

	  Change-Id: Ib18d4392d51ac80ca5481dabf6e498a4e3e49e6f

2021-09-16 13:36 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.21.0-rc1 Released.

2021-09-16 08:31 +0000 [9b17523c4b]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.21.0
2021-09-14 12:02 +0000 [551068deb6]  George Joseph <gjoseph@digium.com>

	* pjproject: Add patch to fix trailing whitespace issue in rtpmap

	  An issue was found where a particular manufacturer's phones add a
	  trailing space to the end of the rtpmap attribute when specifying
	  a payload type that has a "param" after the format name and clock
	  rate. For example:

	  a=rtpmap:120 opus/48000/2 \r\n

	  Because pjmedia_sdp_attr_get_rtpmap currently takes everything after
	  the second '/' up to the line end as the param, the space is
	  included in future comparisons, which then fail if the param being
	  compared to doesn't also have the space.

	  We now use pj_scan_get() to parse the param part of rtpmap so
	  trailing whitespace is automatically stripped.

	  ASTERISK-29654

	  Change-Id: Ibd0a4e243a69cde7ba9312275b13ab62ab86bc1b

2021-09-13 10:18 +0000 [72790f5455]  Carlos Oliva <carlos.oliva@invoxcontact.com>

	* app_mp3: Force output to 16 bits in mpg123

	  In new mpg123 versions (since 1.26) the default output is 32 bits
	  Asterisk expects the output in 16 bits, so we force the output to be on 16 bits.
	  It will work wit new and old versions of mpg123.
	  Thanks Thomas Orgis <thomas-forum@orgis.org> for giving the key!

	  ASTERISK-29635 #close

	  Change-Id: I88c7740118b5af4e895bd8b765b68ed5c11fc816

2021-06-28 10:37 +0000 [425bd97f0d]  Naveen Albert <asterisk@phreaknet.org>

	* app_mf: Add channel agnostic MF sender

	  Adds a SendMF application and PlayMF manager
	  event to send arbitrary R1 MF tones on the
	  current or specified channel.

	  ASTERISK-29496

	  Change-Id: I5d89afdbccee3f86cc702ed96d882f3d351327a4

2021-06-08 15:44 +0000 [7feee9c65b]  Naveen Albert <asterisk@phreaknet.org>

	* res_pjsip_caller_id: Add ANI2/OLI parsing

	  Adds parsing of ANI II digits (Originating
	  Line Information) to PJSIP, on par with
	  what currently exists in chan_sip.

	  ASTERISK-29472

	  Change-Id: Ifc938a7a7d45ce33999ebf3656a542226f6d3847

2021-09-10 09:56 +0000 [a03b10cb09]  Sean Bright <sean.bright@gmail.com>

	* test_http_media_cache.c: Fix copy/paste error during test deregistration.

	  Change-Id: I9a3a978b2f818be464e062d97b93831b127ef28c

2021-09-02 18:20 +0000 [a3a28b9168]  Naveen Albert <asterisk@phreaknet.org>

	* app_stack: Include current location if branch fails

	  Previously, the error emitted when app_stack tries
	  to branch to a dialplan location that doesn't exist
	  has included only the information about the attempted
	  branch in the error log. This adds the current location
	  as well so users can see where the branch failed in
	  the logs.

	  ASTERISK-29626

	  Change-Id: Ia23502ab2ad21485a1ac74295063a8f25a6df5ce

2021-09-02 18:57 +0000 [249fe0f37e]  Naveen Albert <asterisk@phreaknet.org>

	* func_strings: Add STRBETWEEN function

	  Adds the STRBETWEEN function, which can be used to insert a
	  substring between each character in a string. For instance,
	  this can be used to insert pauses between DTMF tones in a
	  string of digits.

	  ASTERISK-29627

	  Change-Id: Ice23009d4a8e9bb9718d2b2301d405567087d258

2021-09-08 14:29 +0000 [4aac9ffcd4]  Sean Bright <sean.bright@gmail.com>

	* test_abstract_jb.c: Fix put and put_out_of_order memory leaks.

	  We can't rely on RAII_VAR(...) to properly clean up data that is
	  allocated within a loop.

	  ASTERISK-27176 #close

	  Change-Id: Ib575616101230c4f603519114ec62ebf3936882c

2021-09-02 19:00 +0000 [b8e2b2ed5e]  Naveen Albert <asterisk@phreaknet.org>

	* func_env: Add DIRNAME and BASENAME functions

	  Adds the DIRNAME and BASENAME functions, which are
	  wrappers around the corresponding C library functions.
	  These can be used to safely and conveniently work with
	  file paths and names in the dialplan.

	  ASTERISK-29628 #close

	  Change-Id: Id3aeb907f65c0ff96b6e57751ff0cb49d61db7f3

2021-07-26 12:46 +0000 [11516e4b8e]  Naveen Albert <asterisk@phreaknet.org>

	* func_sayfiles: Retrieve say file names

	  Up until now, all of the logic used to translate
	  arguments to the Say applications has been
	  directly coupled to playback, preventing other
	  modules from using this logic.

	  This refactors code in say.c and adds a SAYFILES
	  function that can be used to retrieve the file
	  names that would be played. These can then be
	  used in other applications or for other purposes.

	  Additionally, a SayMoney application and a SayOrdinal
	  application are added. Both SayOrdinal and SayNumber
	  are also expanded to support integers greater than
	  one billion.

	  ASTERISK-29531

	  Change-Id: If9718c89353b8e153d84add3cc4637b79585db19

2021-08-09 12:41 +0000 [698604a064]  Naveen Albert <asterisk@phreaknet.org>

	* res_tonedetect: Tone detection module

	  dsp.c contains arbitrary tone detection functionality
	  which is currently only used for fax tone recognition.
	  This change makes this functionality publicly
	  accessible so that other modules can take advantage
	  of this.

	  Additionally, a WaitForTone and TONE_DETECT app and
	  function are included to allow users to do their
	  own tone detection operations in the dialplan.

	  ASTERISK-29546

	  Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26

2021-09-08 09:36 +0000 [9a9e5f0f25]  George Joseph <gjoseph@digium.com>

	* res_snmp: Add -fPIC to _ASTCFLAGS

	  With gcc 11, res/res_snmp.c and res/snmp/agent.c need the
	  -fPIC option added to its _ASTCFLAGS.

	  ASTERISK-29634

	  Change-Id: I34649c85e075fd954e578378fabf798c3f038f50

2021-09-04 12:07 +0000 [7a7b9e47ca]  Sean Bright <sean.bright@gmail.com>

	* term.c: Add support for extended number format terminfo files.

	  ncurses 6.1 introduced an extended number format for terminfo files
	  which the terminfo parsing in Asterisk is not able to parse. This
	  results in some TERM values that do support color (screen-256color on
	  Ubuntu 20.04 for example) to not get a color console.

	  ASTERISK-29630 #close

	  Change-Id: I27a4fcfab502219924af2d6b1c46feba92903cb3

2021-09-07 12:32 +0000 [5c28f881aa]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail.c: Ability to silence instructions if greeting is present.

	  There is an option to silence voicemail instructions but it does not
	  take into consideration if a recorded greeting exists or not. Add a
	  new 'S' option that does that.

	  ASTERISK-29632 #close

	  Change-Id: I03f2f043a9beb9d99deab302247e2a8686066fb4

2021-09-03 00:30 +0000 [84ec6ab275]  Jasper Hafkenscheid <jasper.hafkenscheid@wearespindle.com>

	* res_srtp: Disable parsing of not enabled cryptos

	  When compiled without extended srtp crypto suites also disable parsing
	  these from received SDP. This prevents using these, as some client
	  implementations are not stable.

	  ASTERISK-29625

	  Change-Id: I7dafb29be1cdaabdc984002573f4bea87520533a

2021-09-06 11:37 +0000 [fb72158f46]  Sean Bright <sean.bright@gmail.com>

	* dns.c: Load IPv6 DNS resolvers if configured.

	  IPv6 nameserver addresses are stored in different part of the
	  __res_state structure, so look there if we appear to have support for
	  it.

	  ASTERISK-28004 #close

	  Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d

2021-09-08 07:52 +0000 [e4de46e847]  George Joseph <gjoseph@digium.com>

	* bridge_softmix: Suppress error on topology change failure

	  There are conditions under which a failure to change topology
	  is expected so there's no need to print an ERROR message.

	  ASTERISK-29618
	  Reported by: Alexander

	  Change-Id: Idc168b8588e018bf3a23769f08c4ad646086d481

2021-08-31 02:50 +0000 [f9b8a3a8c8]  sungtae kim <sungtae.kim@avoxi.com>

	* resource_channels.c: Fix wrong external media parameter parse

	  Fixed ARI external media handler to accept body parameters.

	  ASTERISK-29622

	  Change-Id: I49509c48a6cbc0fb4165bfa4f834b5e8b9ace20d

2021-08-25 10:21 +0000 [1bd642db7f]  Sean Bright <sean.bright@gmail.com>

	* config_options: Handle ACO arrays correctly in generated XML docs.

	  There are 3 separate changes here but they are all closely related:

	  * Only try to set matchfield attributes on 'field' nodes

	  * We need to adjust how we treat the category pointer based on the
	    value of the category_match, to avoid memory corruption. We now
	    generate a regex-like string when match types other than
	    ACO_WHITELIST and ACO_BLACKLIST are used.

	  * Switch app_agent_pool from ACO_BLACKLIST_ARRAY to
	    ACO_BLACKLIST_EXACT since we only have one category we need to
	    ignore, not two.

	  ASTERISK-29614 #close

	  Change-Id: I7be7bdb1bb9814f942bc6bb4fdd0a55a7b7efe1e

2021-08-18 14:44 +0000 [38cc3160d3]  Naveen Albert <asterisk@phreaknet.org>

	* chan_iax2: Add ANI2/OLI information element

	  Adds an information element for ANI2 so that
	  Originating Line Information can be transmitted
	  over IAX2 channels.

	  ASTERISK-29605 #close

	  Change-Id: Iaeacdf6ccde18eaff7f776a0f49fee87dcb549d2

2021-08-24 13:25 +0000 [efcde5c582]  Mark Murawski <markm@intellasoft.net>

	* pbx_ael:  Fix crash and lockup issue regarding 'ael reload'

	  Currently pbx_ael does not check if a reload is currently pending
	  before proceeding with a reload. This can cause multiple threads to
	  operate at the same time on what should be mutex protected data. This
	  change adds protection to reloading to ensure only one ael reload is
	  executing at a time.

	  ASTERISK-29609 #close

	  Change-Id: I5ed392ad226f6e4e7696ad742076d3e45c57af35

2021-08-25 06:49 +0000 [c5c5171ec8]  Naveen Albert <asterisk@phreaknet.org>

	* app_read: Allow reading # as a digit

	  Allows for the digit # to be read as a digit,
	  just like any other DTMF digit, as opposed to
	  forcing it to be used as an end of input
	  indicator. The default behavior remains
	  unchanged.

	  ASTERISK-18454 #close

	  Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b

2021-04-05 14:06 +0000 [166556961b]  Sebastien Duthil <sduthil@wazo.community>

	* res_rtp_asterisk: Automatically refresh stunaddr from DNS

	  This allows the STUN server to change its IP address without having to
	  reload the res_rtp_asterisk module.

	  The refresh of the name resolution occurs first when the module is
	  loaded, then recurringly, slightly after the previous DNS answer TTL
	  expires.

	  ASTERISK-29508 #close

	  Change-Id: I7955a046293f913ba121bbd82153b04439e3465f

2021-08-20 15:35 +0000 [220ce865db]  Naveen Albert <asterisk@phreaknet.org>

	* app_queue: Don't reset queue stats on reload

	  Prevents reloads of app_queue from also resetting
	  queue statistics.

	  Also preserves individual queue agent statistics
	  if we're just reloading members.

	  ASTERISK-28701

	  Change-Id: Ib5d4cdec175e44de38ef0f6ede4a7701751766f1

2021-08-24 20:04 +0000 [398a686fac]  Naveen Albert <asterisk@phreaknet.org>

	* bridge_basic: Change warning to verbose if transfer cancelled

	  The attended transfer feature will emit a warning if the user
	  cancels the transfer or the attended transfer doesn't complete
	  for any reason. Changes the warning to a verbose message,
	  since nothing is actually wrong here.

	  ASTERISK-29612 #close

	  Change-Id: I64c93cdb21360a0a8d45e9cb6db3af8168f66e6d

2021-08-25 09:23 +0000 [f516c57401]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: sqrt(.) requires the header math.h.

	  ASTERISK-29616

	  Change-Id: I6c01623926bf10ccac32612687a50fdab3ba0900

2021-08-25 09:29 +0000 [e2fe0a049a]  Alexander Traud <pabstraud@compuserve.com>

	* dialplan: Add one static and fix two whitespace errors.

	  Change-Id: Ia14d515ab63e773097adc6af772ca7123a392f83

2021-06-19 23:36 +0000 [b731b810b9]  Sarah Autumn <sarah@connectionsmuseum.org>

	* sig_analog: Changes to improve electromechanical signalling compatibility

	  This changeset is intended to address compatibility issues encountered
	  when interfacing Asterisk to electromechanical telephone switches that
	  implement ANI-B, ANI-C, or ANI-D.

	  In particular the behaviours that this impacts include:

	   - FGC-CAMA did not work at all when using MF signaling. Modified the
	     switch case block to send calls to the correct part of the
	     signaling-handling state machine.

	   - For FGC-CAMA operation, the delay between called number ST and
	     second wink for ANI spill has been made configurable; previously
	     all calls were made to wait for one full second.

	   - After the ANI spill, previous behavior was to require a 'ST' tone
	     to advance the call.  This has been changed to allow 'STP' 'ST2P'
	     or 'ST3P' as well, for compatibility with ANI-D.

	   - Store ANI2 (ANI INFO) digits in the CALLERID(ANI2) channel variable.

	   - For calls with an ANI failure, No. 1 Crossbar switches will send
	     forward a single-digit failure code, with no calling number digits
	     and no ST pulse to terminate the spill.  I've made the ANI timeout
	     configurable so to reduce dead air time on calls with ANI fail.

	   - ANI info digits configurable.  Modern digital switches will send 2
	     digits, but ANI-B sends only a single info digit.  This caused the
	     ANI reported by Asterisk to be misaligned.

	   - Changed a confusing log message to be more informative.

	  ASTERISK-29518

	  Change-Id: Ib7e27d987aee4ed9bc3663c57ef413e21b404256

2021-08-05 11:55 +0000 [f57fc18657]  Andre Barbosa <andre.emanuel.barbosa@gmail.com>

	* media_cache: Don't lock when curl the remote file

	  When playing a remote sound file, which is not in cache, first we need
	  to download it with ast_bucket_file_retrieve.

	  This can take a while if the remote host is slow. The current CURL
	  timeout is 180secs, so in extreme situations, it can take 3 minutes to
	  return.

	  Because ast_media_cache_retrieve has a lock on all function, while we
	  are waiting for the delayed download, Asterisk is not able to play any
	  more files, even the files already cached locally.

	  ASTERISK-29544 #close

	  Change-Id: I8d4142b463ae4a1d4c41bff2bf63324821567408

2021-08-16 08:25 +0000 [18c467686c]  George Joseph <gjoseph@digium.com>

	* res_pjproject: Allow mapping to Asterisk TRACE level

	  Allow mapping pjproject log messages to the Asterisk TRACE
	  log level.  The defaults were also changes to log pjproject
	  levels 3,4 to DEBUG and 5,6 to TRACE.  Previously 3,4,5,6
	  all went to DEBUG.

	  ASTERISK-29582

	  Change-Id: I859a37a8dec263ed68099709cfbd3e665324c72d

2021-08-12 16:02 +0000 [9ee7b884f1]  Naveen Albert <asterisk@phreaknet.org>

	* app_milliwatt: Timing fix

	  The Milliwatt application uses incorrect tone timings
	  that cause it to play the 1004 Hz tone constantly.

	  This adds an option to enable the correct timing
	  behavior, so that the Milliwatt application can
	  be used for milliwatt test lines. The default behavior
	  remains unchanged for compatability reasons, even
	  though it is incorrect.

	  ASTERISK-29575 #close

	  Change-Id: I73ccc6c6fcaa31931c6fff3b85ad1805b2ce9d8c

2021-08-04 09:46 +0000 [7f4433f8c6]  Naveen Albert <asterisk@phreaknet.org>

	* app_morsecode: Add American Morse code

	  Previously, the Morsecode application only supported international
	  Morse code. This adds support for American Morse code and adds an
	  option to configure the frequency used in off intervals.

	  Additionally, the application checks for hangup between tones
	  to prevent application execution from continuing after hangup.

	  ASTERISK-29541

	  Change-Id: I172431a2e18e6527d577e74adfb05b154cba7bd4

2021-06-28 09:25 +0000 [4bd5757123]  Naveen Albert <asterisk@phreaknet.org>

	* func_math: Return integer instead of float if possible

	  The MIN, MAX, and ABS functions all support float
	  arguments, but currently return floats even if the
	  arguments are all integers and the response is
	  a whole number, in which case the user is likely
	  expecting an integer. This casts the float to an integer
	  before printing into the response buffer if possible.

	  ASTERISK-29495

	  Change-Id: I902d29eacf3ecd0f8a6a5e433c97f0421d205488

2021-08-04 14:16 +0000 [1055660252]  Naveen Albert <asterisk@phreaknet.org>

	* func_scramble: Audio scrambler function

	  Adds a function to scramble audio on a channel using
	  whole spectrum frequency inversion. This can be used
	  as a privacy enhancement with applications like
	  ChanSpy or other potentially sensitive audio.

	  ASTERISK-29542

	  Change-Id: I01020769d91060a1f56a708eb405f87648d1a67e

2021-08-04 19:28 +0000 [4606fb604a]  Naveen Albert <asterisk@phreaknet.org>

	* app_originate: Add ability to set codecs

	  A list of codecs to use for dialplan-originated calls can
	  now be specified in Originate, similar to the ability
	  in call files and the manager action.

	  Additionally, we now default to just using the slin codec
	  for originated calls, rather than all the slin* codecs up
	  through slin192, which has been known to cause issues
	  and inconsistencies from AMI and call file behavior.

	  ASTERISK-29543

	  Change-Id: I96a1aeb83d54b635b7a51e1b4680f03791622883

2021-08-16 11:11 +0000 [478c4fa588]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Remove two dead exceptions for compiler Clang.

	  Commit 305ce3d added -Wno-parentheses-equality to Makefile.rules,
	  turning the previous two warning suppressions from commit e9520db
	  redundant. Let us remove the latter.

	  Change-Id: I0b471254b31e6e05902062761dded4b3e626c7ac

2021-08-10 12:41 +0000 [b02538de2e]  Sean Bright <sean.bright@gmail.com>

	* mgcp: Remove dead debug code

	  ASTERISK-20339 #close

	  Change-Id: I36f364aaa1971241d8f3ea1a5909b463d185a2d5

2021-08-11 06:15 +0000 [68adc2304f]  Joshua C. Colp <jcolp@sangoma.com>

	* policy: Add deprecation and removal versions to modules.

	  app_meetme is deprecated in 19, to be removed in 21.
	  app_osplookup is deprecated in 19, to be removed in 21.
	  chan_alsa is deprecated in 19, to be removed in 21.
	  chan_mgcp is deprecated in 19, to be removed in 21.
	  chan_skinny is deprecated in 19, to be removed in 21.
	  res_pktccops is deprecated in 19, to be removed in 21.
	  cdr_mysql was deprecated in 1.8, to be removed in 19.
	  app_mysql was deprecated in 1.8, to be removed in 19.
	  app_ices was deprecated in 16, to be removed in 19.
	  app_macro was deprecated in 16, to be removed in 21.
	  app_fax was deprecated in 16, to be removed in 19.
	  app_url was deprecated in 16, to be removed in 19.
	  app_image was deprecated in 16, to be removed in 19.
	  app_nbscat was deprecated in 16, to be removed in 19.
	  app_dahdiras was deprecated in 16, to be removed in 19.
	  cdr_syslog was deprecated in 16, to be removed in 19.
	  chan_oss was deprecated in 16, to be removed in 19.
	  chan_phone was deprecated in 16, to be removed in 19.
	  chan_sip was deprecated in 17, to be removed in 21.
	  chan_nbs was deprecated in 16, to be removed in 19.
	  chan_misdn was deprecated in 16, to be removed in 19.
	  chan_vpb was deprecated in 16, to be removed in 19.
	  res_config_sqlite was deprecated in 16, to be removed in 19.
	  res_monitor was deprecated in 16, to be removed in 21.
	  conf2ael was deprecated in 16, to be removed in 19.
	  muted was deprecated in 16, to be removed in 19.

	  ASTERISK-29548
	  ASTERISK-29549
	  ASTERISK-29550
	  ASTERISK-29551
	  ASTERISK-29552
	  ASTERISK-29553
	  ASTERISK-29554
	  ASTERISK-29555
	  ASTERISK-29557
	  ASTERISK-29558
	  ASTERISK-29559
	  ASTERISK-29560
	  ASTERISK-29561
	  ASTERISK-29562
	  ASTERISK-29563
	  ASTERISK-29564
	  ASTERISK-29565
	  ASTERISK-29566
	  ASTERISK-29567
	  ASTERISK-29568
	  ASTERISK-29569
	  ASTERISK-29570
	  ASTERISK-29571
	  ASTERISK-29572
	  ASTERISK-29573
	  ASTERISK-29574

	  Change-Id: Ic3bee31a10d42c4b3bbc913d893f7b2a28a27131

2021-08-12 10:56 +0000 [4bf9b2d279]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.20.0
2021-06-16 15:30 +0000 [af17973bda]  Naveen Albert <asterisk@phreaknet.org>

	* func_frame_drop: New function

	  Adds function to selectively drop specified frames
	  in the TX or RX direction on a channel, including
	  control frames.

	  ASTERISK-29478

	  Change-Id: I8147c9d55d74e2e48861edba6b22f930920541ec

2021-08-02 12:33 +0000 [9a225692fe]  Alexander Traud <pabstraud@compuserve.com>

	* aelparse: Accept an included context with timings.

	  With Asterisk 1.6.0, in the main parser for the configuration file
	  extensions.conf, the separator was changed from vertical bar to comma.
	  However, the first separator was not changed in aelparse; it still had
	  to be a vertical bar, and no comma was allowed.

	  Additionally, this change allows the vertical bar for the first and
	  last parameter again, even in the main parser, because the vertical bar
	  was still accepted for the other parameters.

	  ASTERISK-29540

	  Change-Id: I882e17c73adf4bf2f20f9046390860d04a9f8d81

2021-08-03 11:30 +0000 [b2aab2891c]  Kevin Harwell <kharwell@sangoma.com>

	* format_ogg_speex: Implement a "not supported" write handler

	  This format did not specify a "write" handler, so when attempting to write
	  to it (ast_writestream) a crash would occur.

	  This patch adds a default handler that simply issues a "not supported"
	  warning, thus no longer crashing.

	  ASTERISK-29539

	  Change-Id: I8f6ddc7cc3b15da30803be3b1cf68e2ba0fbce91

2021-08-05 14:21 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.20.0-rc1 Released.

2021-06-28 08:48 +0000 [75c01f4bef]  Naveen Albert <asterisk@phreaknet.org>

	* cdr_adaptive_odbc: Prevent filter warnings

	  Previously, if CDR filters were used so that
	  not all CDR records used all sections defined
	  in cdr_adaptive_odbc.conf, then warnings will
	  always be emitted (if each CDR record is unique
	  to a particular section, n-1 warnings to be
	  specific).

	  This turns the offending warning log into
	  a verbose message like the other one, since
	  this behavior is intentional and not
	  indicative of anything wrong.

	  ASTERISK-29494

	  Change-Id: Ifd314fa9298722bc99494d5ca2658a5caa94a5f8

2021-07-25 16:53 +0000 [1298c02665]  Naveen Albert <asterisk@phreaknet.org>

	* app_queue: Allow streaming multiple announcement files

	  Allows multiple files comprising an agent announcement
	  to be played by separating on the ampersand, similar
	  to the multi-file support in other Asterisk applications.

	  ASTERISK-29528

	  Change-Id: Iec600d8cd5ba14aa1e4e37f906accb356cd7891a

2021-04-13 02:36 +0000 [8da1466478]  Igor Goncharovsky <igorg@iqtek.ru>

	* res_pjsip_header_funcs: Add PJSIP_HEADERS() ability to read header by pattern

	  PJSIP currently does not provide a function to replace SIP_HEADERS() function to get a list of headers from INVITE request.
	  It may be used to get all X- headers in case the actual set and names of headers unknown.

	  ASTERISK-29389

	  Change-Id: Ic09d395de71a0021e0d6c5c29e1e19d689079f8b

2021-07-08 07:34 +0000 [b40e97b1d7]  Rijnhard Hessel <rijnhard@teleforge.co.za>

	* res_statsd: handle non-standard meter type safely

	  Meter types are not well supported,
	  lacking support in telegraf, datadog and the official statsd servers.
	  We deprecate meters and provide a compliant fallback for any existing usages.

	  A flag has been introduced to allow meters to fallback to counters.


	  ASTERISK-29513

	  Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7

2021-06-16 15:26 +0000 [0460e77e51]  Naveen Albert <asterisk@phreaknet.org>

	* app_dtmfstore: New application to store digits

	  Adds application to asynchronously collect digits
	  dialed on a channel in the TX or RX direction
	  using a framehook and stores them in a specified
	  variable, up to a configurable number of digits.

	  ASTERISK-29477

	  Change-Id: I51aa93fc9507f7636ac44806c4420ce690423e6f

2021-07-22 11:39 +0000 [56e6486aa6]  under <pcapdump@gmail.com>

	* codec_builtin.c: G729 audio gets corrupted by Asterisk due to smoother

	  If Asterisk gets G.729 6-byte VAD frames inbound, then at outbound Asterisk sends this G.729 stream with non-continuous timestamps.
	  This makes the audio stream not-playable at the receiver side.
	  Linphone isn't able to play such an audio - lots of disruptions are heard.
	  Also I had complains of bad audio from users which use other types of phones.

	  After debugging, I found this is a regression connected with RTP Smoother (main/smoother.c).

	  Smoother has a special code to handle G.729 VAD frames (search for AST_SMOOTHER_FLAG_G729 in smoother.c).

	  However, this flag is never set in Asterisk-12 and newer.
	  Previously it has been set (see Asterisk-11).

	  ASTERISK-29526 #close

	  Change-Id: I6f51ecb1a3ecd9c6d59ec5a6811a27446e17065d

2021-07-27 07:53 +0000 [aec2087d25]  Joshua C. Colp <jcolp@sangoma.com>

	* docs: Remove embedded macro in WaitForCond XML documentation.

	  Change-Id: I40c6514e1843e320f3cbe0b2c70d4a98c0e35b9c

2021-07-22 16:53 +0000 [b7f0d83698]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.19.1
2021-06-14 13:28 +0000 [7168aaf0dd]  Kevin Harwell <kharwell@sangoma.com>

	* AST-2021-009 - pjproject-bundled: Avoid crash during handshake for TLS

	  If an SSL socket parent/listener was destroyed during the handshake,
	  depending on timing, it was possible for the handling callback to
	  attempt access of it after the fact thus causing a crash.

	  ASTERISK-29415 #close

	  Change-Id: I105dacdcd130ea7fdd4cf2010ccf35b5eaf1432d

2021-05-10 17:59 +0000 [dbfde090ea]  Kevin Harwell <kharwell@sangoma.com>

	* AST-2021-008 - chan_iax2: remote crash on unsupported media format

	  If chan_iax2 received a packet with an unsupported media format, for
	  example vp9, then it would set the frame's format to NULL. This could
	  then result in a crash later when an attempt was made to access the
	  format.

	  This patch makes it so chan_iax2 now ignores/drops frames received
	  with unsupported media format types.

	  ASTERISK-29392 #close

	  Change-Id: Ifa869a90dafe33eed8fd9463574fe6f1c0ad3eb1

2021-04-28 07:36 +0000 [662e731b33]  Joshua C. Colp <jcolp@sangoma.com>

	* AST-2021-007 - res_pjsip_session: Don't offer if no channel exists.

	  If a re-INVITE is received after we have sent a BYE request then it
	  is possible for no channel to be present on the session. If this
	  occurs we allow PJSIP to produce the offer instead. Since the call
	  is being hung up if it produces an incorrect offer it doesn't
	  actually matter. This also ensures that code which produces SDP
	  does not need to handle if a channel is not present.

	  ASTERISK-29381

	  Change-Id: I673cb88c432f38f69b2e0851d55cc57a62236042

2021-06-29 11:07 +0000 [e52fd18c80]  Andre Barbosa <andre.emanuel.barbosa@gmail.com>

	* res_stasis_playback: Check for chan hangup on play_on_channels

	  Verify `ast_check_hangup` before looping to the next sound file.
	  If the call is already hangup we just break the cycle.
	  It also ensures that the PlaybackFinished event is sent if the call was hangup.

	  This is also use-full when we are playing a big list of file for a channel that is hangup.
	  Before this patch Asterisk will give a warning for every sound not played and fire a PlaybackStart for every sound file on the list tried to be played.

	  With the patch we just break the playback cycle when the chan is hangup.

	  ASTERISK-29501 #close

	  Change-Id: Ic4e1c01b974c9a1f2d9678c9d6b380bcfc69feb8

2021-07-15 15:04 +0000 [c86b4c573b]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_stir_shaken: RFC 8225 compliance and error message cleanup.

	  From RFC 8225 Section 5.2.1:

	      The "dest" claim is a JSON object with the claim name of "dest"
	      and MUST have at least one identity claim object.  The "dest"
	      claim value is an array containing one or more identity claim JSON
	      objects representing the destination identities of any type
	      (currently "tn" or "uri").  If the "dest" claim value array
	      contains both "tn" and "uri" claim names, the JSON object should
	      list the "tn" array first and the "uri" array second.  Within the
	      "tn" and "uri" arrays, the identity strings should be put in
	      lexicographical order, including the scheme-specific portion of
	      the URI characters.

	  Additionally, make it clear that there was a failure to sign the JWT
	  payload and not necessarily a memory allocation failure.

	  Change-Id: Ia8733b861aef6edfaa9c2136e97b447a01578dc9

2021-06-30 17:15 +0000 [acc3b8ba75]  Sebastien Duthil <sduthil@wazo.community>

	* stun: Emit warning message when STUN request times out

	  Without this message, it is not obvious that the reason is STUN timeout.

	  ASTERISK-29507 #close

	  Change-Id: I26e4853c23a1aed324552e1b9683ea3c05cb1f74

2021-07-02 10:15 +0000 [68dbcd5ef5]  Sean Bright <sean.bright@gmail.com>

	* res_http_media_cache.c: Parse media URLs to find extensions.

	  Use the URI parsing functions to parse playback URLs in order to find
	  their file extensions.

	  For backwards compatibility, we first look at the full URL, then at
	  any Content-Type header, and finally at just the path portion of the
	  URL.

	  ASTERISK-27871 #close

	  Change-Id: I16d0682f6d794be96539261b3e48f237909139cb

2021-07-13 10:31 +0000 [f0fd0e7675]  Sean Bright <sean.bright@gmail.com>

	* main/cdr.c: Correct Party A selection.

	  This appears to just have been a copy/paste error from 6258bbe7. Fix
	  suggested by Ross Beer in ASTERISK~29166.

	  Change-Id: I51e0de92042e53f37597c6f83a75621ef0d1ae37

2021-05-26 12:09 +0000 [cb67bc2ebb]  Naveen Albert <asterisk@phreaknet.org>

	* app_reload: New Reload application

	  Adds an application to reload modules
	  from within the dialplan.

	  ASTERISK-29454

	  Change-Id: Ic8ab025d8b38dd525b872b41c465c999c5810774

2021-06-30 08:07 +0000 [6f135c0ef4]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_config_wizard.c: Add port matching support.

	  In f8b0c2c9 we added support for port numbers in 'match' statements
	  but neglected to include that support in the PJSIP config wizard.

	  The removed code would have also prevented IPv6 addresses from being
	  successfully used in the config wizard as well.

	  ASTERISK-29503 #close

	  Change-Id: Idd5bbfd48009e7a741757743dbaea68e2835a34d

2021-05-22 09:31 +0000 [7bc9a05059]  Naveen Albert <mail@interlinked.x10host.com>

	* app_waitforcond: New application

	  While several applications exist to wait for
	  a certain event to occur, none allow waiting
	  for any generic expression to become true.
	  This application allows for waiting for a condition
	  to become true, with configurable timeout and
	  checking interval.

	  ASTERISK-29444

	  Change-Id: I08adf2824b8bc63405778cf355963b5005612f41

2021-06-04 06:11 +0000 [884d863c08]  Andre Barbosa <andre.emanuel.barbosa@gmail.com>

	* res_stasis_playback: Send PlaybackFinish event only once for errors

	  When we try to play a list of sound files in the same Play command,
	  we get only one PlaybackFinish event, after all sounds are played.

	  But in the case where the Play fails (because channel is destroyed
	  for example), Asterisk will send one PlaybackFinish event for each
	  sound file still to be played. If the list is big, Asterisk is
	  sending many events.

	  This patch adds a failed state so we can understand that the play
	  failed. On that case we don't send the event, if we still have a
	  list of sounds to be played.

	  When we reach the last sound, we send the PlaybackFinish with
	  the failed state.

	  ASTERISK-29464 #close

	  Change-Id: I4c2e5921cc597702513af0d7c6c2c982e1798322

2021-06-17 07:57 +0000 [987eb8a5ea]  George Joseph <gjoseph@digium.com>

	* jitterbuffer:  Correct signed/unsigned mismatch causing assert

	  If the system time has stepped backwards because of a time
	  adjustment between the time a frame is timestamped and the
	  time we check the timestamps in abstract_jb:hook_event_cb(),
	  we get a negative interval, but we don't check for that there.
	  abstract_jb:hook_event_cb() then calls
	  fixedjitterbuffer:fixed_jb_get() (via abstract_jb:jb_get_fixed)
	  and the first thing that does is assert(interval >= 0).

	  There are several issues with this...

	   * abstract_jb:hook_event_cb() saves the interval in a variable
	     named "now" which is confusing in itself.

	   * "now" is defined as an unsigned int which converts the negative
	     value returned from ast_tvdiff_ms() to a large positive value.

	   * fixed_jb_get()'s parameter is defined as a signed int so the
	     interval gets converted back to a negative value.

	   * fixed_jb_get()'s assert is NOT an ast_assert but a direct define
	     that points to the system assert() so it triggers even in
	     production mode.

	  So...

	   * hook_event_cb()'s "now" was renamed to "relative_frame_start" and
	     changed to an int64_t.
	   * hook_event_cb() now checks for a negative value right after
	     retrieving both the current and framedata timestamps and just
	     returns the frame if the difference is negative.
	   * fixed_jb_get()'s local define of ASSERT() was changed to call
	     ast_assert() instead of the system assert().

	  ASTERISK-29480
	  Reported by: Dan Cropp

	  Change-Id: Ic469dec73c2edc3ba134cda6721a999a9714f3c9

2021-05-21 19:08 +0000 [bee710121e]  Naveen Albert <mail@interlinked.x10host.com>

	* app_dial: Expanded A option to add caller announcement

	  Hitherto, the A option has made it possible to play
	  audio upon answer to the called party only. This option
	  is expanded to allow for playback of an audio file to
	  the caller instead of or in addition to the audio
	  played to the answerer.

	  ASTERISK-29442

	  Change-Id: If6eed3ff5c341dc8c588c8210987f2571e891e5e

2021-06-21 06:31 +0000 [4470838d89]  Joshua C. Colp <jcolp@sangoma.com>

	* core: Don't play silence for Busy() and Congestion() applications.

	  When using the Busy() and Congestion() applications the
	  function ast_safe_sleep is used by wait_for_hangup to safely
	  wait on the channel. This function may send silence if Asterisk
	  is configured to do so using the transmit_silence option.

	  In a scenario where an answered channel dials a Local channel
	  either directly or through call forwarding and the Busy()
	  or Congestion() dialplan applications were executed with the
	  transmit_silence option enabled the busy or congestion
	  tone would not be heard.

	  This is because inband generation of tones (such as busy
	  and congestion) is stopped when other audio is sent to
	  the channel they are being played to. In the given
	  scenario the transmit_silence option would result in
	  silence being sent to the channel, thus stopping the
	  inband generation.

	  This change adds a variant of ast_safe_sleep which can be
	  used when silence should not be played to the channel. The
	  wait_for_hangup function has been updated to use this
	  resulting in the tones being generated as expected.

	  ASTERISK-29485

	  Change-Id: I066bfc987a3ad6f0ccc88e0af4cd63f6a4729133

2021-05-07 01:18 +0000 [1b8f9a08d9]  Bernd Zobl <b.zobl@commend.com>

	* res_pjsip_sdp_rtp: Evaluate remotely held for Session Progress

	  With the fix for ASTERISK_28754 channels are no longer put on hold if an
	  outbound INVITE is answered with a "Session Progress" containing
	  "inactive" audio.

	  The previous change moved the evaluation of the media attributes to
	  `negotiate_incoming_sdp_stream()` to have the `remotely_held` status
	  available when building the SDP in `create_outgoing_sdp_stream()`.
	  This however means that an answer to an outbound INVITE, which does not
	  traverse `negotiate_incoming_sdp_stream()`, cannot set the
	  `remotely_held` status anymore.

	  This change moves the check so that both, `negotiate_incoming_sdp_stream()` and
	  `apply_negotiated_sdp_stream()` can do the checks.

	  ASTERISK-29479

	  Change-Id: Icde805a819399d5123b688e1ed1d2bcd9d5b0f75

2021-06-17 14:41 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.19.0-rc1 Released.

2021-06-17 09:38 +0000 [d41c4db68d]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.19.0
2021-06-16 08:50 +0000 [b6bf6d091e]  George Joseph <gjoseph@digium.com>

	* res_pjsip_messaging: Overwrite user in existing contact URI

	  When the MessageSend destination is in the form
	  PJSIP/<number>@<endpoint> and the endpoint's contact
	  URI already has a user component, that user component
	  will now be replaced with <number> when creating the
	  request URI.

	  ASTERISK_29404

	  Change-Id: I80e5910fa25c803d1440da0594a0d6b34b6b4ad5

2021-03-16 11:45 +0000 [fe40c3cc74]  Bernd Zobl <b.zobl@commend.com>

	* res_pjsip/pjsip_message_filter: set preferred transport in pjsip_message_filter

	  Set preferred transport when querying the local address to use in
	  filter_on_tx_messages(). This prevents the module to erroneously select
	  the wrong transport if more than one transports of the same type (TCP or
	  TLS) are configured.

	  ASTERISK-29241

	  Change-Id: I598e60257a7f92b29efce1fb3e9a2fc06f1439b6

2021-06-10 09:34 +0000 [80be0edae7]  Naveen Albert <asterisk@phreaknet.org>

	* pbx_builtins: Corrects SayNumber warning

	  Previously, SayNumber always emitted a warning if the caller hung up
	  during execution. Usually this isn't correct, so check if the channel
	  hung up and, if so, don't emit a warning.

	  ASTERISK-29475

	  Change-Id: Ieea4a67301c6ea83bbc7690c1d4808d79a704594

2021-05-22 07:29 +0000 [2dbf8cd135]  Jaco Kroon <jaco@uls.co.za>

	* func_lock: Add "dialplan locks show" cli command.

	  For example:

	  arthur*CLI> dialplan locks show
	  func_lock locks:
	  Name                                     Requesters Owner
	  uls-autoref                              0          (unlocked)
	  1 total locks listed.

	  Obviously other potentially useful stats could be added (eg, how many
	  times there was contention, how many times it failed etc ... but that
	  would require keeping the stats and I'm not convinced that's worth the
	  effort.  This was useful to troubleshoot some other issues so submitting
	  it.

	  Change-Id: Ib875e56feb49d523300aec5f36c635ed74843a9f
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-05-22 07:53 +0000 [5d7d174e1f]  Jaco Kroon <jaco@uls.co.za>

	* func_lock: Prevent module unloading in-use module.

	  The scenario where a channel still has an associated datastore we
	  cannot unload since there is a function pointer to the destroy and fixup
	  functions in play.  Thus increase the module ref count whenever we
	  allocate a datastore, and decrease it during destroy.

	  In order to tighten the race that still exists in spite of this (below)
	  add some extra failure cases to prevent allocations in these cases.

	  Race:

	  If module ref is zero, an LOCK or TRYLOCK is invoked (near)
	  simultaneously on a channel that has NOT PREVIOUSLY taken a lock, and if
	  in such a case the datastore is created *prior* to unloading being set
	  to true (first step in module unload) then it's possible that the module
	  will unload with the destructor being called (and segfault) post the
	  module being unloaded.  The module will however wait for such locks to
	  release prior to unloading.

	  If post that we can recheck the module ref before returning the we can
	  (in theory, I think) eliminate the last of the race.  This race is
	  mostly theoretical in nature.

	  Change-Id: I21a514a0b56755c578a687f4867eacb8b59e23cf
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-05-22 07:42 +0000 [4040095ea4]  Jaco Kroon <jaco@uls.co.za>

	* func_lock: Fix memory corruption during unload.

	  AST_TRAVERSE accessess current as current = current->(field).next ...
	  and since we free current (and ast_free poisons the memory) we either
	  end up on a ast_mutex_lock to a non-existing lock that can never be
	  obtained, or a segfault.

	  Incidentally add logging in the "we have to wait for a lock to release"
	  case, and remove an ineffective statement that sets memory that was just
	  cleared by ast_calloc to zero.

	  Change-Id: Id19ba3d9867b23d0e6783b97e6ecd8e62698b8c3
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-05-22 07:48 +0000 [5008d9fee1]  Jaco Kroon <jaco@uls.co.za>

	* func_lock: Fix requesters counter in error paths.

	  In two places we bail out with failure after we've already incremented
	  the requesters counter, if this occured then it would effectively result
	  in unload to wait indefinitely, thus preventing clean shutdown.

	  Change-Id: I362a6c0dc424f736d4a9c733d818e72d19675283
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-05-25 10:36 +0000 [b4e77b7f10]  Naveen Albert <asterisk@phreaknet.org>

	* app_originate: Allow setting Caller ID and variables

	  Caller ID can now be set on the called channel and
	  Variables can now be set on the destination
	  using the Originate application, just as
	  they can be currently using call files
	  or the Manager Action.

	  ASTERISK-29450

	  Change-Id: Ia64cfe97d2792bcbf4775b3126cad662922a8b66

2021-06-10 16:24 +0000 [e824138a26]  Sean Bright <sean.bright@gmail.com>

	* menuselect: Fix description of several modules.

	  The text description needs to be the last thing on the AST_MODULE_INFO
	  line to be pulled in properly by menuselect.

	  Change-Id: I0c913e36fea8b661f42e56920b6c5513ae8fd832

2021-05-23 19:20 +0000 [2c2dc7d97d]  Naveen Albert <asterisk@phreaknet.org>

	* app_confbridge: New ConfKick() application

	  Adds a new ConfKick() application, which may
	  be used to kick a specific channel, all channels,
	  or all non-admin channels from a specified
	  conference bridge, similar to existing CLI and
	  AMI commands.

	  ASTERISK-29446

	  Change-Id: I5d96b683880bfdd27b2ab1c3f2e897c5046ded9b

2021-06-02 08:25 +0000 [17b9c5c5cf]  Naveen Albert <asterisk@phreaknet.org>

	* res_pjsip_dtmf_info: Hook flash

	  Adds hook flash recognition support
	  for application/hook-flash.

	  ASTERISK-29460

	  Change-Id: I1d060fa89a7cf41244c98f892fff44eb1c9738ea

2021-06-02 08:11 +0000 [2376425785]  Naveen Albert <asterisk@phreaknet.org>

	* sip_to_pjsip: Fix missing cases

	  Adds the "auto" case which is valid with
	  both chan_sip dtmfmode and chan_pjsip's
	  dtmf_mode, adds subscribecontext to
	  subscribe_context conversion, and accounts
	  for cipher = ALL being invalid.

	  ASTERISK-29459

	  Change-Id: Ie27d6606efad3591038000e5f3c34fa94730f6f2

2021-05-20 09:51 +0000 [95f588496d]  Naveen Albert <mail@interlinked.x10host.com>

	* app_confbridge: New option to prevent answer supervision

	  A new user option, answer_channel, adds the capability to
	  prevent answering the channel if it hasn't already been
	  answered yet.

	  ASTERISK-29440

	  Change-Id: I26642729d0345f178c7b8045506605c8402de54b

2021-04-22 13:07 +0000 [6cd89c4f0a]  George Joseph <gjoseph@digium.com>

	* res_pjsip_messaging: Refactor outgoing URI processing

	   * Implemented the new "to" parameter of the MessageSend()
	     dialplan application.  This allows a user to specify
	     a complete SIP "To" header separate from the Request URI.

	   * Completely refactored the get_outbound_endpoint() function
	     to actually handle all the destination combinations that
	     we advertized as supporting.

	   * We now also accept a destination in the same format
	     as Dial()...  PJSIP/number@endpoint

	   * Added lots of debugging.

	  ASTERISK-29404
	  Reported by Brian J. Murrell

	  Change-Id: I67a485196d9199916468f7f98bfb9a0b993a4cce

2021-05-16 10:21 +0000 [8236f2f155]  Naveen Albert <mail@interlinked.x10host.com>

	* func_math: Three new dialplan functions

	  Introduces three new dialplan functions, MIN and MAX,
	  which can be used to calculate the minimum or
	  maximum of up to two numbers, and ABS, an absolute
	  value function.

	  ASTERISK-29431

	  Change-Id: I2bda9269d18f9d54833c85e48e41fce0e0ce4d8d

2021-05-19 13:45 +0000 [cee88c9826]  Ben Ford <bford@digium.com>

	* STIR/SHAKEN: Add Date header, dest->tn, and URL checking.

	  STIR/SHAKEN requires a Date header alongside the Identity header, so
	  that has been added. Still on the outgoing side, we were missing the
	  dest->tn section of the JSON payload, so that has been added as well.
	  Moving to the incoming side, URL checking has been added to the public
	  cert URL to ensure that it starts with http.

	  https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021

	  Change-Id: Idee5b1b5e45bc3b483b3070e46ce322dca5b3f1c

2021-05-24 13:38 +0000 [e07fd35238]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip: On partial transport reload also move factories.

	  For connection oriented transports PJSIP uses factories to
	  produce transports. When doing a partial transport reload
	  we need to also move the factory of the transport over so
	  that anything referencing the transport (such as an endpoint)
	  has the factory available.

	  ASTERISK-29441

	  Change-Id: Ieae0fb98eab2d9257cad996a1136e5a62d307161

2021-05-20 08:18 +0000 [d1305af137]  Naveen Albert <mail@interlinked.x10host.com>

	* func_volume: Add read capability to function.

	  Up until now, the VOLUME function has been write
	  only, so that TX/RX values can be set but not
	  read afterwards. Now, previously set TX/RX values
	  can be read later.

	  ASTERISK-29439

	  Change-Id: Ia23e92fa2e755c36e9c8e69f2940d2703ccccb5f

2021-05-20 07:51 +0000 [bb8e868066]  Joshua C. Colp <jcolp@sangoma.com>

	* res_rtp_asterisk: Set correct raddr port on RTCP srflx candidates.

	  RTCP ICE candidates use a base address derived from the RTP
	  candidate. The port on the base address was not being updated to
	  the RTCP port.

	  This change sets the base port to the RTCP port and all is well.

	  ASTERISK-29433

	  Change-Id: Ide2d2115b307bfd3c2dfbc4d187515d724519040

2021-04-13 02:57 +0000 [6d5f087138]  Evgenios_Greek <jone1984@hotmail.com>

	* stasis: Fix "FRACK!, Failed assertion bad magic number" when unsubscribing

	  When unsubscribing from an endpoint technology a FRACK
	  would occur due to incorrect reference counting. This fixes
	  that issue, along with some other issues.

	  Fixed a typo in get_subscription when calling ao2_find as it
	  needed to pass the endpoint ID and not the entire object.

	  Fixed scenario where a subscription would get returned when
	  it shouldn't have been when searching based on endpoint
	  technology.

	  A doulbe unreference has also been resolved by only explicitly
	  releasing the reference held by tech_subscriptions.

	  ASTERISK-28237 #close
	  Reported by: Lucas Tardioli Silveira

	  Change-Id: Ia91b15f8e5ea68f850c66889a6325d9575901729

2021-05-20 02:15 +0000 [a123e8cb0e]  Joseph Nadiv <ynadiv@corpit.xyz>

	* res_pjsip.c: Support endpoints with domain info in username

	  In multidomain environments, it is desirable to create
	  PJSIP endpoints with the domain info in the endpoint name
	  in pjsip_endpoint.conf.  This resulted in an error with
	  registrations, NOTIFY, and OPTIONS packet generation.

	  This commit will detect if there is an @ in the endpoint
	  identifier and generate the URI accordingly so NOTIFY and
	  OPTIONS From headers will generate correctly.

	  ASTERISK-28393

	  Change-Id: I96f8d01dfdd5573ba7a28299e46271dd4210b619

2021-05-25 05:38 +0000 [0ee56cc2bd]  Joshua C. Colp <jcolp@sangoma.com>

	* asterisk: We've moved to Libera Chat!

	  Change-Id: I48c1933dd79b50ddc0a6793acec4754b4e95c575

2021-05-19 13:13 +0000 [0cd5d5150a]  Jeremy Lainé <jeremy.laine@m4x.org>

	* res_rtp_asterisk: make it possible to remove SOFTWARE attribute

	  By default Asterisk reports the PJSIP version in a SOFTWARE attribute
	  of every STUN packet it sends. This may not be desired in a production
	  environment, and RFC5389 recommends making the use of the SOFTWARE
	  attribute a configurable option:

	  https://datatracker.ietf.org/doc/html/rfc5389#section-16.1.2

	  This patch adds a `stun_software_attribute` yes/no option to make it
	  possible to omit the SOFTWARE attribute from STUN packets.

	  ASTERISK-29434

	  Change-Id: Id3f2b1dd9584536ebb3a1d7e8395fd8b3e46860b

2021-04-15 10:43 +0000 [7c0b8f0701]  George Joseph <gjoseph@digium.com>

	* res_pjsip_outbound_authenticator_digest: Be tolerant of RFC8760 UASs

	  RFC7616 and RFC8760 allow more than one WWW-Authenticate or
	  Proxy-Authenticate header per realm, each with different digest
	  algorithms (including new ones like SHA-256 and SHA-512-256).
	  Thankfully however a UAS can NOT send back multiple Authenticate
	  headers for the same realm with the same digest algorithm.  The
	  UAS is also supposed to send the headers in order of preference
	  with the first one being the most preferred.  We're supposed to
	  send an Authorization header for the first one we encounter for a
	  realm that we can support.

	  The UAS can also send multiple realms, especially when it's a
	  proxy that has forked the request in which case the proxy will
	  aggregate all of the Authenticate headers and then send them all
	  back to the UAC.

	  It doesn't stop there though... Each realm can require a
	  different username from the others.  There's also nothing
	  preventing each digest algorithm from having a unique password
	  although I'm not sure if that adds any benefit.

	  So now... For each Authenticate header we encounter, we have to
	  determine if we support the digest algorithm and, if not, just
	  skip the header.  We then have to find an auth object that
	  matches the realm AND the digest algorithm or find a wildcard
	  object that matches the digest algorithm. If we find one, we add
	  it to the results vector and read the next Authenticate header.
	  If the next header is for the same realm AND we already added an
	  auth object for that realm, we skip the header. Otherwise we
	  repeat the process for the next header.

	  In the end, we'll have accumulated a list of credentials we can
	  pass to pjproject that it can use to add Authentication headers
	  to a request.

	  NOTE: Neither we nor pjproject can currently handle digest
	  algorithms other than MD5.  We don't even have a place for it in
	  the ast_sip_auth object. For this reason, we just skip processing
	  any Authenticate header that's not MD5.  When we support the
	  others, we'll move the check into the loop that searches the
	  objects.

	  Changes:

	   * Added a new API ast_sip_retrieve_auths_vector() that takes in
	     a vector of auth ids (usually supplied on a call to
	     ast_sip_create_request_with_auth()) and populates another
	     vector with the actual objects.

	   * Refactored res_pjsip_outbound_authenticator_digest to handle
	     multiple Authenticate headers and set the stage for handling
	     additional digest algorithms.

	   * Added a pjproject patch that allows them to ignore digest
	     algorithms they don't support.  This patch has already been
	     merged upstream.

	   * Updated documentation for auth objects in the XML and
	     in pjsip.conf.sample.

	   * Although res_pjsip_authenticator_digest isn't affected
	     by this change, some debugging and a testsuite AMI event
	     was added to facilitate testing.

	  Discovered during OpenSIPit 2021.

	  ASTERISK-29397

	  Change-Id: I3aef5ce4fe1d27e48d61268520f284d15d650281

2021-04-14 09:44 +0000 [48851279a8]  Joseph Nadiv <ynadiv@corpit.xyz>

	* res_pjsip_dialog_info_body_generator: Add LOCAL/REMOTE tags in dialog-info+xml

	  RFC 4235 Section 4.1.6 describes XML elements that should be
	  sent to subscribed endpoints to identify the local and remote
	  participants in the dialog.

	  This patch adds this functionality to PJSIP by iterating through the
	  ringing channels causing the NOTIFY, and inserts the channel info
	  into the dialog so that information is properly passed to the endpoint
	  in dialog-info+xml.

	  ASTERISK-24601
	  Patch submitted: Joshua Elson
	  Modified by: Joseph Nadiv and Sean Bright
	  Tested by: Joseph Nadiv

	  Change-Id: I20c5cf5b45f34d7179df6573c5abf863eb72964b

2021-05-13 09:47 +0000 [10aa4f9876]  Naveen Albert <mail@interlinked.x10host.com>

	* app_voicemail: Configurable voicemail beep

	  Hitherto, VoiceMail() played a non-customizable beep tone to indicate
	  the caller could leave a message. In some cases, the beep may not
	  be desired, or a different tone may be desired.

	  To increase flexibility, a new option allows customization of the tone.
	  If the t option is specified, the default beep will be overridden.
	  Supplying an argument will cause it to use the specified file for the tone,
	  and omitting it will cause it to skip the beep altogether. If the option
	  is not used, the default behavior persists.

	  ASTERISK-29349

	  Change-Id: I1c439c0011497e28a28067fc1cf1e654c8843280

2021-05-13 10:32 +0000 [ea117be4c6]  Naveen Albert <mail@interlinked.x10host.com>

	* AMI: Add AMI event to expose hook flash events

	  Although Asterisk can receive and propogate flash events, it currently
	  provides no mechanism for doing anything with them itself.

	  This AMI event allows flash events to be processed by Asterisk.
	  Additionally, AST_CONTROL_FLASH is included in a switch statement
	  in channel.c to avoid throwing a warning when we shouldn't.

	  ASTERISK-29380

	  Change-Id: Ie17ffe65086e0282c88542e38eed6a461ec79e81

2021-05-13 10:13 +0000 [859cd2a56b]  Naveen Albert <mail@interlinked.x10host.com>

	* main/file.c: Don't throw error on flash event.

	  AST_CONTROL_FLASH isn't accounted for in a switch statement in file.c
	  where it should be ignored. Adding this to the switch ensures a
	  warning isn't thrown on RFC2833 flash events, since nothing's amiss.

	  ASTERISK-29372

	  Change-Id: I4fa549bfb7ba1894a4044de999ea124877422fbc

2021-05-11 12:00 +0000 [8f8b4e7e41]  Joshua C. Colp <jcolp@sangoma.com>

	* pjsip: Add patch for resolving STUN packet lifetime issues.

	  In some cases it was possible for a STUN packet to be destroyed
	  prematurely or even destroyed partially multiple times.

	  This patch provided by Teluu fixes the lifetime of these
	  packets and ensures they aren't partially destroyed multiple
	  times.

	  https://github.com/pjsip/pjproject/pull/2709

	  ASTERISK-29377

	  Change-Id: Ie842ad24ddf345e01c69a4d333023f05f787abca

2021-05-13 08:50 +0000 [11e61217a0]  Naveen Albert <mail@interlinked.x10host.com>

	* chan_sip: Expand hook flash recognition.

	  Some ATAs send hook flash events as application/hook-flash, rather than a DTMF
	  event. Now, we also recognize hook-flash as a flash event.

	  ASTERISK-29370

	  Change-Id: I1c3b82a040dff3affcd94bad8ce33edc90c04725

2021-05-12 21:16 +0000 [f557126998]  Sean Bright <sean.bright@gmail.com>

	* chan_pjsip: Correct misleading trace message

	  ASTERISK-29358 #close

	  Change-Id: I050daff67066873df4e8fc7f4bd977c1ca06e647

2021-04-26 17:00 +0000 [0b4b207076]  Ben Ford <bford@digium.com>

	* STIR/SHAKEN: Switch to base64 URL encoding.

	  STIR/SHAKEN encodes using base64 URL format. Currently, we just use
	  base64. New functions have been added that convert to and from base64
	  encoding.

	  The origid field should also be an UUID. This means there's no reason to
	  have it as an option in stir_shaken.conf, as we can simply generate one
	  when creating the Identity header.

	  https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021

	  Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c

2021-05-11 12:26 +0000 [d00bedba81]  Ben Ford <bford@digium.com>

	* STIR/SHAKEN: OPENSSL_free serial hex from openssl.

	  We're getting the serial number of the certificate from openssl and
	  freeing it with ast_free(), but it needs to be freed with OPENSSL_free()
	  instead. Now we duplicate the string and free the one from openssl with
	  OPENSSL_free(), which means we can still use ast_free() on the returned
	  string.

	  https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021

	  Change-Id: Ia6e1a4028c1933a0e1d204b769ebb9f5a11f00ab

2021-04-21 11:12 +0000 [184a027eaa]  Ben Ford <bford@digium.com>

	* STIR/SHAKEN: Fix certificate type and storage.

	  During OpenSIPit, we found out that the public certificates must be of
	  type X.509. When reading in public keys, we use the corresponding X.509
	  functions now.

	  We also discovered that we needed a better naming scheme for the
	  certificates since certificates with the same name would cause issues
	  (overwriting certs, etc.). Now when we download a public certificate, we
	  get the serial number from it and use that as the name of the cached
	  certificate.

	  The configuration option public_key_url in stir_shaken.conf has also
	  been renamed to public_cert_url, which better describes what the option
	  is for.

	  https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021

	  Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d

2021-04-22 13:07 +0000 [63c25d3821]  George Joseph <gjoseph@digium.com>

	* Updates for the MessageSend Dialplan App

	  Enhancements:

	   * The MessageSend dialplan application now takes an optional
	     third argument that can set the message's "To" field on
	     outgoing messages.  It's an alternative to using the
	     MESSAGE(to) dialplan function.

	     NOTE: No channel driver currently implements this field.  A
	     follow-on commit for res_pjsip_messaging will implement it for
	     the chan_pjsip channel driver.

	   * To prevent confusion with the first argument, currently named
	     "to", it's been renamed to "destination". Its function,
	     creating the request URI, hasn't changed.

	   * The documentation for MessageSend was updated to be
	     more clear about the parameters and how they interact
	     the MESSAGE() dialplan function.

	   * With the rename of MessageSend's first parameter, and the fact
	     that message.c references <info> elements in chan_sip.c,
	     res_pjsip_messaging.c and res_xmpp, they each needed
	     documentation updates to use MessageDestinationInfo instead of
	     MessageToInfo.

	   * appdocsxml.dtd was updated to include a missing element
	     declaration for "dataType".  This was showing up as an error
	     in Eclipse's dtd editor.

	   * Despite the changes in this commit, there should be
	     no impact to current users of MessageSend.

	  Change-Id: I6fb5b569657a02866a66ea352fd53d30d8ac965a

2021-04-30 15:21 +0000 [d72c7d2d66]  Sean Bright <sean.bright@gmail.com>

	* translate.c: Avoid refleak when checking for a translation path

	  Change-Id: Idbd61ff77545f4a78b06a5064b55112e774b70e6

2021-04-27 12:31 +0000 [0eb5c58bd4]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk: More robust timestamp checking

	  We assume that a timestamp value of 0 represents an 'uninitialized'
	  timestamp, but 0 is a valid value. Add a simple wrapper to be able to
	  differentiate between whether the value is set or not.

	  This also removes the fix for ASTERISK~28812 which should not be
	  needed if we are checking the last timestamp appropriately.

	  ASTERISK-29030 #close

	  Change-Id: Ie70d657d580d9a1f2877e25a6ef161c5ad761cf7

2021-04-28 07:17 +0000 [d2b8141d26]  Joshua C. Colp <jcolp@sangoma.com>

	* chan_local: Skip filtering audio formats on removed streams.

	  When a stream topology is provided to chan_local when dialing
	  it filters the audio formats down. This operation did not skip
	  streams which were removed (that have no formats) resulting in
	  calling being aborted.

	  This change causes such streams to be skipped.

	  ASTERISK-29407

	  Change-Id: I1de8b98727cb2d10f4bc287da0b5fdcb381addd6

2021-04-29 15:28 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.18.0-rc1 Released.

2021-04-29 10:22 +0000 [0fd9c6588b]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.18.0
2021-04-23 12:37 +0000 [5a2939a5d6]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip.c: OPTIONS processing can now optionally skip authentication

	  ASTERISK-27477 #close

	  Change-Id: I68f6715bba92a525149e35d142a49377a34a1193

2021-04-21 06:42 +0000 [080d0eb72c]  Jean Aunis <jean.aunis@prescom.fr>

	* translate.c: Take sampling rate into account when checking codec's buffer size

	  Up/down sampling changes the number of samples produced by a translation.
	  This must be taken into account when checking the codec's buffer size.

	  ASTERISK-29328

	  Change-Id: I9aebe2f8788e00321a7f5c47aa97c617f39e9055

2021-04-25 04:45 +0000 [c43094f1cb]  Joshua C. Colp <jcolp@sangoma.com>

	* svn: Switch to https scheme.

	  Some versions of SVN seemingly don't follow the redirect
	  to https.

	  Change-Id: Ia7c76c18cb620bcf56f08e1211a7d80d321fe253

2021-04-20 08:42 +0000 [5ace782583]  George Joseph <gjoseph@digium.com>

	* res_pjsip:  Update documentation for the auth object

	  Change-Id: I2f76867ce02ec611964925159be099de83346e38

2021-04-02 07:21 +0000 [a4a63db253]  George Joseph <gjoseph@digium.com>

	* bridge_channel_write_frame: Check for NULL channel

	  There is a possibility, when bridge_channel_write_frame() is
	  called, that the bridge_channel->chan will be NULL.  The first
	  thing bridge_channel_write_frame() does though is call
	  ast_channel_is_multistream() which had no check for a NULL
	  channel and therefore caused a segfault. Since it's still
	  possible for bridge_channel_write_frame() to write the frame to
	  the other channels in the bridge, we don't want to bail before we
	  call ast_channel_is_multistream() but we can just skip the
	  multi-channel stuff.  So...

	  bridge_channel_write_frame() only calls ast_channel_is_multistream()
	  if bridge_channel->chan is not NULL.

	  As a safety measure, ast_channel_is_multistream() now returns
	  false if the supplied channel is NULL.

	  ASTERISK-29379
	  Reported-by: Vyrva Igor
	  Reported-by: Ross Beer

	  Change-Id: Idfe62dbea8c69813ecfd58e113a6620dc42352ce

2021-04-01 10:38 +0000 [84115fe657]  Sean Bright <sean.bright@gmail.com>

	* loader.c: Speed up deprecation metadata lookup

	  Only use an XPath query once per module, then just navigate the DOM for
	  everything else.

	  Change-Id: Ia0336a7185f9180ccba4b6f631a00f9a22a36e92

2021-03-10 09:03 +0000 [a9e1e0e1c8]  Joshua C. Colp <jcolp@sangoma.com>

	* loader: Output warnings for deprecated modules.

	  Using the information from the MODULEINFO XML we can
	  now output useful information at the end of module
	  loading for deprecated modules. This includes the
	  version it was deprecated in, the version it will be
	  removed in, and the replacement if available.

	  ASTERISK-29339

	  Change-Id: I2080dab97d2186be94c421b41dabf6d79a11611a

2021-03-22 15:22 +0000 [bd426397bb]  Kevin Harwell <kharwell@sangoma.com>

	* res_rtp_asterisk: Fix standard deviation calculation

	  For some input to the standard deviation algorithm extremely large,
	  and wrong numbers were being calculated.

	  This patch uses a new formula for correctly calculating both the
	  running mean and standard deviation for the given inputs.

	  ASTERISK-29364 #close

	  Change-Id: Ibc6e18be41c28bed3fde06d612607acc3fbd621f

2021-03-29 17:40 +0000 [473e648fca]  Kevin Harwell <kharwell@sangoma.com>

	* res_rtp_asterisk: Don't count 0 as a minimum lost packets

	  The calculated minimum lost packets represents the lowest number of
	  lost packets missed during an RTCP report interval. Zero of course
	  is the lowest, but the idea is that this value contain the lowest
	  number of lost packets once some have been missed.

	  This patch checks to make sure the number of lost packets over an
	  interval is not zero before checking and setting the minimum value.

	  Also, this patch updates the rtp lost packet test to check for
	  packet loss over several reports vs one.

	  Change-Id: I07d6e21cec61e289c2326138d6bcbcb3c3d5e008

2021-03-31 12:17 +0000 [07f8456dcb]  Kevin Harwell <kharwell@sangoma.com>

	* res_rtp_asterisk: Statically declare rtp_drop_packets_data object

	  This patch makes the drop_packets_data object static.

	  Change-Id: If4f9b21fa0c47d41a35b6b05941d978efb4da87b

2021-03-30 06:59 +0000 [3d4564dc16]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip: Give error when TLS transport configured but not supported.

	  Change-Id: I058af496021ff870ccec2d8cbade637b348ab80b

2021-03-29 17:52 +0000 [8953152b97]  Joshua C. Colp <jcolp@sangoma.com>

	* res_rtp_asterisk: Only raise flash control frame on end.

	  Flash in RTP is conveyed the same as DTMF, just with a
	  specific digit. In Asterisk however we do flash as a
	  single control frame.

	  This change makes it so that only on end do we provide
	  the flash control frame to the core. Previously we would
	  provide a flash control frame on both begin and end,
	  causing flash to work improperly.

	  ASTERISK-29373

	  Change-Id: I1accd9c6e859811336e670e698bd8bd124f33226

2021-03-05 12:53 +0000 [d607afd8d3]  Kevin Harwell <kharwell@sangoma.com>

	* res_rtp_asterisk: Add a DEVMODE RTP drop packets CLI command

	  This patch makes it so when Asterisk is compiled in DEVMODE a CLI
	  command is available that allows someone to drop incoming RTP
	  packets. The command allows for dropping of packets once, or on a
	  timed interval (e.g. drop 10 packets every 5 seconds). A user can
	  also specify to drop packets by IP address.

	  Change-Id: I25fa7ae9bad6ed68e273bbcccf0ee51cae6e7024

2021-03-05 12:47 +0000 [20af6d23df]  Kevin Harwell <kharwell@sangoma.com>

	* time: Add timeval create and unit conversion functions

	  Added a TIME_UNIT enumeration, and a function that converts a
	  string to one of the enumerated values. Also, added functions
	  that create and initialize a timeval object using a specified
	  value, and unit type.

	  Change-Id: Ic31a1c3262a44f77a5ef78bfc85dcf69a8d47392

2021-03-24 08:38 +0000 [72fb6fd757]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Add alembic migration to add ringinuse to queue_members.

	  ASTERISK-28356 #close

	  Change-Id: I53a1bfdd3113d620bea88349019173a2f3f0ae39

2021-03-24 10:52 +0000 [464ecc1d82]  Ben Ford <bford@digium.com>

	* logger.conf.sample: Add more debug documentation.

	  Change-Id: Iff0e713f2120d8dce8e1e26924b99ed17f9d9dff

2021-03-23 17:24 +0000 [cd090efde6]  Sean Bright <sean.bright@gmail.com>

	* queues.conf.sample: Correct 'context' documentation.

	  ASTERISK-24631 #close

	  Change-Id: I8bf8776906a72ee02f24de6a85345940b9ff6b6f

2021-03-23 15:15 +0000 [7215895590]  Sean Bright <sean.bright@gmail.com>

	* app_queue.c: Remove dead 'updatecdr' code.

	  Also removed the sample documentation, and some oddly-placed
	  documentation about the timeout argument to the Queue() application
	  itself. There is a large section on the timeout behavior below.

	  ASTERISK-26614 #close

	  Change-Id: I8f84e8304b50305b7c4cba2d9787a5d77c3a6217

2021-03-19 09:11 +0000 [98d149b4ce]  Mark Murawski <markm@intellasoft.net>

	* logger: Console sessions will now respect logger.conf dateformat= option

	  The 'core' console (ie: asterisk -c) does read logger.conf and does
	  use the dateformat= option.

	  Whereas 'remote' consoles (ie: asterisk -r -T) does not read logger.conf
	  and uses a hard coded dateformat option for printing received verbose messages:
	    main/logger.c: static char dateformat[256] = "%b %e %T"

	  This change will load logger.conf for each remote console session and
	  use the dateformat= option to set the per-line timestamp for verbose messages

	  Change-Id: I3ea10990dbd920e9f7ce8ff771bc65aa7f4ea8c1
	  ASTERISK-25358: #close
	  Reported-by: Igor Liferenko

2021-03-19 15:57 +0000 [9e19d98f45]  Sean Bright <sean.bright@gmail.com>

	* app_queue.c: Don't crash when realtime queue name is empty.

	  ASTERISK-27542 #close

	  Change-Id: If0b9719380a25533d2aed1053cff845dc3a4854a

2021-03-18 11:14 +0000 [3c8a7597b3]  George Joseph <gjoseph@digium.com>

	* res_pjsip_session: Make reschedule_reinvite check for NULL topologies

	  When the check for equal topologies was added to reschedule_reinvite()
	  it was assumed that both the pending and active media states would
	  actually have non-NULL topologies.  We since discovered this isn't
	  the case.

	  We now only test for equal topologies if both media states have
	  non-NULL topologies.  The logic had to be rearranged a bit to make
	  sure that we cloned the media states if their topologies were
	  non-NULL but weren't equal.

	  ASTERISK-29215

	  Change-Id: I61313cca7fc571144338aac826091791b87b6e17

2021-03-19 04:56 +0000 [a8042f2a4c]  Joshua C. Colp <jcolp@sangoma.com>

	* app_queue: Only send QueueMemberStatus if status changes.

	  If a queue member was updated with the same status multiple
	  times each time a QueueMemberStatus event would be sent
	  which would be a duplicate of the previous.

	  This change makes it so that the QueueMemberStatus event is
	  only sent if the status actually changes.

	  ASTERISK-29355

	  Change-Id: I580c60d992a0a8f2bea8b91c868771b3b490d116

2021-03-19 08:52 +0000 [73a52c53ce]  Joshua C. Colp <jcolp@sangoma.com>

	* core_unreal: Fix deadlock with T.38 control frames.

	  When using the ast_unreal_lock_all function no channel
	  locks can be held before calling it.

	  This change unlocks the channel that indicate was
	  called on before doing so and then relocks it afterwards.

	  ASTERISK-29035

	  Change-Id: Id65016201b5f9c9519a216e250f9101c629e19e9

2021-03-01 17:32 +0000 [720a39eb9e]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip: Add support for partial transport reload.

	  Some configuration items for a transport do not result in
	  the underlying transport changing, but instead are just
	  state we keep ourselves and use. It is perfectly reasonable
	  to change these items.

	  These include local_net and external_* information.

	  ASTERISK-29354

	  Change-Id: I027857ccfe4419f460243e562b5f098434b3d43a

2021-03-13 05:01 +0000 [eff26ffe42]  Jaco Kroon <jaco@uls.co.za>

	* menuselect: exit non-zero in case of failure on --enable|disable options.

	  ASTERISK-29348

	  Change-Id: I77e3466435f5a51a57538b29addb68d811af238d
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-03-17 10:28 +0000 [7f29dd0a53]  Joshua C. Colp <jcolp@sangoma.com>

	* res_rtp_asterisk: Force resync on SSRC change.

	  When an SSRC change occurs the timestamps are likely
	  to change as well. As a result we need to reset the
	  timestamp mapping done in the calc_rxstamp function
	  so that they map properly from timestamp to real
	  time.

	  This previously occurred but due to packet
	  retransmission support the explicit setting
	  of the marker bit was not effective.

	  ASTERISK-29352

	  Change-Id: I2d4c8f93ea24abc1030196706de2d70facf05a5a

2021-03-10 08:05 +0000 [0ae922e48b]  Joshua C. Colp <jcolp@sangoma.com>

	* menuselect: Add ability to set deprecated and removed versions.

	  The "deprecated_in" and "removed_in" information can now be
	  set in MODULEINFO for a module and is then displayed in
	  menuselect so users can be aware of when a module is slated
	  to be deprecated and then removed.

	  ASTERISK-29337

	  Change-Id: I6952889cf08e0e9e99cf8b43f99b3cef4688087a

2021-03-10 08:18 +0000 [ea3d4e0343]  Joshua C. Colp <jcolp@sangoma.com>

	* xml: Allow deprecated_in and removed_in for MODULEINFO.

	  ASTERISK-29337

	  Change-Id: I2211b7da8d29369f8649aeabce07679da0787f2b

2021-03-09 08:54 +0000 [e42417e910]  Joshua C. Colp <jcolp@sangoma.com>

	* xml: Embed module information into core XML documentation.

	  This change embeds the MODULEINFO block of modules
	  into the core XML documentation. This provides a shared
	  mechanism for use by both menuselect and Asterisk for
	  information and a definitive source of truth.

	  ASTERISK-29335

	  Change-Id: Ifbfd5c700049cf320a3e45351ac65dd89bc99d90

2021-03-10 04:47 +0000 [ee8c9017a7]  Joshua C. Colp <jcolp@sangoma.com>

	* documentation: Fix non-matching module support levels.

	  Some modules have a different support level documented in their
	  MODULEINFO XML and Asterisk module definition. This change
	  brings the two in sync for the modules which were not matching.

	  ASTERISK-29336

	  Change-Id: If2f819103d4a271e2e0624ef4db365e897fa3d35

2021-03-11 17:01 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.17.0-rc1 Released.

2021-03-11 10:28 +0000 [ec8b030bd7]  Kevin Harwell <kharwell@sangoma.com>

	* manager: Increase the non breaking AMI version number

	  ASTERISK~29244 added three new AMI events, so bump the version number.

	  Change-Id: I0e77fa36d38fb27dec3481d4ef08131330da0632

2021-03-11 10:38 +0000 [fb17a41641]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.17.0
2021-03-09 18:35 +0000 [ceb8404667]  Joshua C. Colp <jcolp@sangoma.com>

	* channel: Fix crash in suppress API.

	  There exists an inconsistency with framehook usage
	  such that it is only on reads that the frame should
	  be freed, not on writes as well.

	  ASTERISK-29071

	  Change-Id: I5ef918ebe4debac8a469e8d43bf9d6b673e8e472

2021-02-24 12:00 +0000 [59129bfab8]  Jaco Kroon <jaco@uls.co.za>

	* func_callerid+res_agi: Fix compile errors related to -Werror=zero-length-bounds

	  Change-Id: I75152cece8a00b7523d542e5ac22796f9595692b
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-02-24 12:34 +0000 [fce875cf46]  Jaco Kroon <jaco@uls.co.za>

	* app.h: Fix -Werror=zero-length-bounds compile errors in dev mode.

	  Change-Id: I5c104dc1f8417ccd3d01faf86e84ccbf89bc3b31
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-03-06 16:57 +0000 [dcfcf7d70a]  Sean Bright <sean.bright@gmail.com>

	* app_dial.c: Only send DTMF on first progress event.

	  ASTERISK-29329 #close

	  Change-Id: Ic58e7a17f1ff3f785a5b21dced88682581149601

2021-03-05 11:16 +0000 [f875175815]  Alexander Traud <pabstraud@compuserve.com>

	* res_format_attr_*: Parameter Names are Case-Insensitive.

	  see RFC 4855:
	  parameter names are case-insensitive both in media type strings and
	  in the default mapping to the SDP a=fmtp attribute.

	  This change is required for H.263+ because some implementations are
	  known to use even mixed-case. This does not fix ASTERISK~29268 because
	  H.264 was not fixed. This approach here lowers/uppers both parameter
	  names and parameter values. H.264 needs a different approach because
	  one of its parameter values is not case-insensitive:
	  sprop-parameter-sets is Base64.

	  Change-Id: Idf2a73457be231647aed3c87b1da197afba86892

2021-03-05 11:45 +0000 [10c0d9e711]  Alexander Traud <pabstraud@compuserve.com>

	* chan_iax2: System Header strings is included via asterisk.h/compat.h.

	  The system header strings was included mistakenly with commit 3de0204.
	  That header is included via asterisk.h and there via the compat.h.

	  Change-Id: I3dc49060e275295f785670c87cc65fd3c3abd24a

2021-03-08 15:43 +0000 [526917bf61]  Sean Bright <sean.bright@gmail.com>

	* modules.conf: Fix differing usage of assignment operators.

	  ASTERISK-24434 #close

	  Change-Id: I0144e8d65d878128da59dcf3df12ca8cee47d6db

2021-03-08 14:06 +0000 [08b94d5837]  Sean Bright <sean.bright@gmail.com>

	* strings.h: ast_str_to_upper() and _to_lower() are not pure.

	  Because they modify their argument they are not pure functions and
	  should not be marked as such, otherwise the compiler may optimize
	  them away.

	  ASTERISK-29306 #close

	  Change-Id: Ibec03a08522dd39e8a137ece9bc6a3059dfaad5f

2021-03-08 17:16 +0000 [1fc4ab38b8]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold.c: Plug ref leak caused by ao2_replace() misuse.

	  ao2_replace() bumps the reference count of the object that is doing the
	  replacing, which is not what we want. We just want to drop the old ref
	  on the old object and update the pointer to point to the new object.

	  Pointed out by George Joseph in #asterisk-dev

	  Change-Id: Ie8167ed3d4b52b9d1ea2d785f885e8c27206743d

2021-02-19 05:50 +0000 [b90ecc6b31]  Torrey Searle <tsearle@voxbone.com>

	* res/res_rtp_asterisk: generate new SSRC on native bridge end

	  For RTCP to work, we update the ssrc to be the one corresponding to
	  the native bridge while active.  However when the bridge ends we
	  should generate a new SSRC as the sequence numbers will not continue
	  from the native bridge left off.

	  ASTERISK-29300 #close

	  Change-Id: I23334b6934d2bf6490bda4bbf6414d96b8d17d10

2021-03-01 15:35 +0000 [11b53aecc8]  Joshua C. Colp <jcolp@sangoma.com>

	* sorcery: Add support for more intelligent reloading.

	  Some sorcery objects actually contain dynamic content
	  that can change despite the underlying configuration
	  itself not changing. A good example of this is the
	  res_pjsip_endpoint_identifier_ip module which allows
	  specifying hostnames. While the configuration may not
	  change between reloads the DNS information of the
	  hostnames can.

	  This change adds the ability for a sorcery object to be
	  marked as having dynamic contents which is then taken
	  into account when reloading by the sorcery file based
	  config module. If there is an object with dynamic content
	  then a reload will be forced while if there are none
	  then the existing behavior of not reloading occurs.

	  ASTERISK-29321

	  Change-Id: I9342dc55be46cc00204533c266a68d972760a0b1

2021-03-02 12:55 +0000 [90a456e6d2]  George Joseph <gjoseph@digium.com>

	* res_pjsip_refer: Move the progress dlg release to a serializer

	  Although the dlg session count was incremented in a pjsip servant
	  thread, there's no guarantee that the last thread to unref this
	  progress object was one.  Before we decrement, we need to make
	  sure that this is either a servant thread or that we push the
	  decrement to a serializer that is one.

	  Because pjsip_dlg_dec_session requires the dialog lock, we don't
	  want to wait on the task to complete if we had to push it to a
	  serializer.

	  Change-Id: I8ff2d5d94be3ff04298394070434e22a7d3cbc41

2021-03-03 12:31 +0000 [13b1ee8aa5]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_registrar: Include source IP and port in log messages.

	  When registering it can be useful to see the source IP address and
	  port in cases where multiple devices are using the same endpoint
	  or when anonymous is in use.

	  ASTERISK-29325

	  Change-Id: Ie178a6f55f53f8473035854c411bc3d056e0a2e0

2021-03-03 12:44 +0000 [4083aa6546]  Joshua C. Colp <jcolp@sangoma.com>

	* asterisk: Update copyright.

	  ASTERISK-29326

	  Change-Id: Ia95dbfb66e2d11ac4d1228444283bb2e4d77396a

2021-02-25 13:50 +0000 [b409fa1fff]  Ben Ford <bford@digium.com>

	* AST-2021-006 - res_pjsip_t38.c: Check for session_media on reinvite.

	  When Asterisk sends a reinvite negotiating T38 faxing, it's possible a
	  crash can occur if the response contains a m=image and zero port. The
	  reinvite callback code now checks session_media to see if it is null or
	  not before trying to access the udptl variable on it.

	  ASTERISK-29305

	  Change-Id: I1dfc51c5fa586e38579ede4bc228edee213ccaa9

2021-01-28 08:39 +0000 [fcf1bec363]  Alexander Traud <pabstraud@compuserve.com>

	* res_format_attr_h263: Generate valid SDP fmtp for H.263+.

	  Fixed:
	  * RFC 4629 does not allow the value "0" for MPI, K, and N.
	  * Allow value "0" for PAR.
	  * BPP is printed only when specified because "0" has a meaning.

	  New:
	  * Added CPCF and MaxBR.
	  * Some implementations provide CIF without MPI: a=fmtp:xx CIF;F=1
	    Although a violation of RFC 3555 section 3, we can support that.

	  Changed:
	  * Resorts the CIFs from large to small which partly fixes ASTERISK~29267.

	  Change-Id: I95a650c715007b8dde11a77cb37d9c6c123a441e

2021-02-24 07:04 +0000 [d65041ebea]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_nat: Don't rewrite Contact on REGISTER responses.

	  When sending a SIP response to an incoming REGISTER request
	  we don't want to change the Contact header as it will
	  contain the Contacts registered to the AOR and not our own
	  Contact URI.

	  ASTERISK-29235

	  Change-Id: I35a0723545281dd01fcd5cae497baab58720478c

2021-03-03 07:32 +0000 [c81c4f3ae2]  Joshua C. Colp <jcolp@sangoma.com>

	* channel: Fix memory leak in suppress API.

	  A frame suppression API exists as part of channels
	  which allows audio frames to or from a channel to
	  be dropped. The MuteAudio AMI action uses this
	  API to perform its job.

	  This API uses a framehook to intercept flowing
	  audio and drop it when appropriate. It is the
	  responsibility of the framehook to free the
	  frame it is given if it changes the frame. The
	  suppression API failed to do this resulting in
	  a leak of audio frames.

	  This change adds the freeing of these frames.

	  ASTERISK-29071

	  Change-Id: Ie50acd454d672d36af914050c327d2e120d8ba7b

2021-01-27 14:01 +0000 [6c065088be]  Salah Ahmed <sahmed@voxbone.com>

	* res_rtp_asterisk:  Check remote ICE reset and reset local ice attrb

	  This change will check is the remote ICE session got reset or not by
	  checking the offered ufrag and password with session. If the remote ICE
	  reset session then Asterisk reset its local ufrag and password to reject
	  binding request with Old ufrag and Password.

	  ASTERISK-29266

	  Change-Id: I9c55e79a7af98a8fbb497d336b828ba41bc34eeb

2021-01-07 08:25 +0000 [4ceb07434c]  Holger Hans Peter Freyther <holger@moiji-mobile.com>

	* pjsip: Generate progress (once) when receiving a 180 with a SDP

	  ASTERISK-29105

	  Change-Id: If1615fe7115fe544ef974b044d3cea5c48b94a38

2021-02-28 03:24 +0000 [980cc0d364]  Nico Kooijman <nk@voclarion.nl>

	* main: With Dutch language year after 2020 is not spoken in say.c

	  Implemented the english way of saying the year in ast_say_date_with_format_nl.
	  Currently the numbers are spoken correctly until 2020 and stopped working
	  this year.

	  ASTERISK-29297 #close
	  Reported-by: Jacek Konieczny

	  Change-Id: If5918eed5ab05df31df4dd23f08a909a60f6aba4

2021-02-23 10:14 +0000 [d7eaf44501]  Alexei Gradinari <alex2grad@gmail.com>

	* res_fax: validate the remote/local Station ID for UTF-8 format

	  If the remote Station ID contains invalid UTF-8 characters
	  the asterisk fails to publish the Stasis and ReceiveFax status messages.

	  json.c: Error building JSON from '{s: s, s: s}': Invalid UTF-8 string.
	  0: /usr/sbin/asterisk(ast_json_vpack+0x98) [0x4f3f28]
	  1: /usr/sbin/asterisk(ast_json_pack+0x8c) [0x4f3fcc]
	  2: /usr/sbin/asterisk(ast_channel_publish_varset+0x2b) [0x57aa0b]
	  3: /usr/sbin/asterisk(pbx_builtin_setvar_helper+0x121) [0x530641]
	  4: /usr/lib64/asterisk/modules/res_fax.so(+0x44fe) [0x7f27f4bff4fe]
	  ...
	  stasis_channels.c: Error creating message

	  json.c: Error building JSON from '{s: s, s: s, s: s, s: s, s: s, s: s, s: o}': Invalid UTF-8 string.
	  0: /usr/sbin/asterisk(ast_json_vpack+0x98) [0x4f3f28]
	  1: /usr/sbin/asterisk(ast_json_pack+0x8c) [0x4f3fcc]
	  2: /usr/lib64/asterisk/modules/res_fax.so(+0x5acd) [0x7f27f4c00acd]
	  ...
	  res_fax.c: Error publishing ReceiveFax status message

	  This patch replaces the invalid UTF-8 Station IDs with an empty string.

	  ASTERISK-29312 #close

	  Change-Id: Ieb00b6ecf67db3bfca787649caa8517f29d987db

2021-02-25 13:55 +0000 [8604867857]  Sean Bright <sean.bright@gmail.com>

	* app_page.c: Don't fail to Page if beep sound file is missing

	  ASTERISK-16799 #close

	  Change-Id: I40367b0d6dbf66a39721bde060c8b2d734a61cf4

2021-02-19 13:25 +0000 [1c1d4b2c68]  George Joseph <gjoseph@digium.com>

	* res_pjsip_refer: Refactor progress locking and serialization

	  Although refer_progress_notify() always runs in the progress
	  serializer, the pjproject evsub module itself can cause the
	  subscription to be destroyed which then triggers
	  refer_progress_on_evsub_state() to clean it up.  In this case,
	  it's possible that refer_progress_notify() could get the
	  subscription pulled out from under it while it's trying to use
	  it.

	  At one point we tried to have refer_progress_on_evsub_state()
	  push the cleanup to the serializer and wait for its return before
	  returning to pjproject but since pjproject calls its state
	  callbacks with the dialog locked, this required us to unlock the
	  dialog while waiting for the serialized cleanup, then lock it
	  again before returning to pjproject. There were also still some
	  cases where other callers of refer_progress_notify() weren't
	  using the serializer and crashes were resulting.

	  Although all callers of refer_progress_notify() now use the
	  progress serializer, we decided to simplify the locking so we
	  didn't have to unlock and relock the dialog in
	  refer_progress_on_evsub_state().

	  Now, refer_progress_notify() holds the dialog lock for its
	  duration and since pjproject also holds the dialog lock while
	  calling refer_progress_on_evsub_state() (which does the cleanup),
	  there should be no more chances for the subscription to be
	  cleaned up while still being used to send NOTIFYs.

	  To be extra safe, we also now increment the session count on
	  the dialog when we create a progress object and decrement
	  the count when the progress is destroyed.

	  ASTERISK-29313

	  Change-Id: I97a8bb01771a3c85345649b8124507f7622a8480

2021-02-24 16:05 +0000 [11fa7f6e0c]  Kevin Harwell <kharwell@sangoma.com>

	* res_rtp_asterisk: Add packet subtype during RTCP debug when relevant

	  For some RTCP packet types the report count is actually the packet's subtype.
	  This was not being reflected in the packet debug output.

	  This patch makes it so for some RTCP packet types a "Packet Subtype" is
	  now output in the debug replacing the "Reception reports" (i.e count).

	  Change-Id: Id4f4b77bb37077a4c4f039abd6a069287bfefcb8

2021-02-16 12:33 +0000 [7acb6e2194]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_session: Always produce offer on re-INVITE without SDP.

	  When PJSIP receives a re-INVITE without an SDP offer the INVITE
	  session library will first call the on_create_offer callback and
	  if unavailable then use the active negotiated SDP as the offer.

	  In some cases this would result in a different SDP then was
	  previously used without an incremented SDP version number. The two
	  known cases are:

	  1. Sending an initial INVITE with a set of codecs and having the
	  remote side answer with a subset. The active negotiated SDP would
	  have the pruned list but would not have an incremented SDP version
	  number.

	  2. Using re-INVITE for unhold. We would modify the active negotiated
	  SDP but would not increment the SDP version.

	  To solve these, and potential other unknown cases, the on_create_offer
	  callback has now been implemented which produces a fresh offer with
	  incremented SDP version number. This better fits within the model
	  provided by the INVITE session library.

	  ASTERISK-28452

	  Change-Id: I2d81048d54edcb80fe38fdbb954a86f0a58281a1

2021-02-15 12:24 +0000 [88461a23bb]  Ben Ford <bford@digium.com>

	* res_pjsip_session.c: Check topology on re-invite.

	  Removes an unnecessary check for the conditional that compares the
	  stream topologies to see if they are equal to suppress re-invites. This
	  was a problem when a Digium phone received an INVITE that offered codecs
	  different than what it supported, causing Asterisk to send the
	  re-invite.

	  ASTERISK-29303

	  Change-Id: I04dc91befb2387904e28a9aaeaa3bcdbcaa7fa63

2021-02-15 13:02 +0000 [3096dcee15]  Boris P. Korzun <drtr0jan@yandex.ru>

	* res_config_pgsql: Limit realtime_pgsql() to return one (no more) record.

	  Added a SELECT 'LIMIT' clause to realtime_pgsql() and refactored the function.

	  ASTERISK-29293 #close

	  Change-Id: If5a6d4b1072ea2e6e89059b21139d554a74b34f5

2021-02-23 05:28 +0000 [9a1cf7fb77]  Jaco Kroon <jaco@uls.co.za>

	* res_odbc_transaction: correctly initialise forcecommit value from DSN.

	  Also improve the in-process documentation to clarify that the value is
	  initialised from the DSN and not default false, but that the DSN's value
	  is default false if unset.

	  ASTERISK-29311 #close

	  Change-Id: I46e2379f7b0656034442bce77cb37ccd4e61098d
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2019-09-13 08:02 +0000 [c63ab5580c]  Ivan Poddubnyi <ivan.poddubny@gmail.com>

	* app_queue: Fix conversion of complex extension states into device states

	  Queue members using dialplan hints as a state interface must handle
	  INUSE+RINGING hint as RINGINUSE devstate, and INUSE + ONHOLD as INUSE.

	  ASTERISK-28369

	  Change-Id: I127e06943d4b4f1afc518f9e396de77449992b9f

2021-02-10 11:59 +0000 [a63c7883b4]  Jaco Kroon <jaco@uls.co.za>

	* app.h: Restore C++ compatibility for macro AST_DECLARE_APP_ARGS

	  This partially reverts commit 3d1bf3c537bba0416f691f48165fdd0a32554e8a,
	  specifically for app.h.

	  This works with both gcc 9.3.0 and 10.2.0 now, both for C and C++ (as
	  tested with external modules).

	  ASTERISK-29287

	  Change-Id: I5b9f02a9b290675682a1d13f1788fdda597c9fca
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-02-05 06:29 +0000 [99666117be]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Filter pass-through audio/video formats away, again.

	  Instead of looking for pass-through formats in the list of transcodable
	  formats (which is going to find nothing), go through the result which
	  is going to be the jointcaps of the tech_pvt of the channel. Finally,
	  only with that list, ast_format_cap_remove(.) is going to succeed.

	  This restores the behaviour of Asterisk 1.8. However, it does not fix
	  ASTERISK_29282 because that issue report is about chan_sip and PJSIP.
	  Here, only chan_sip is fixed because PJSIP does not even call
	  ast_rtp_instance_available_formats -> ast_translate_available_format.

	  Change-Id: Icade2366ac2b82935b95a9981678c987da2e8c34

2021-02-17 14:51 +0000 [d847f7e8f8]  Jaco Kroon <jaco@uls.co.za>

	* func_odbc:  Introduce minargs config and expose ARGC in addition to ARGn.

	  minargs enables enforcing of minimum count of arguments to pass to
	  func_odbc, so if you're unconditionally using ARG1 through ARG4 then
	  this should be set to 4.  func_odbc will generate an error in this case,
	  so for example

	  [FOO]
	  minargs = 4

	  and ODBC_FOO(a,b,c) in dialplan will now error out instead of using a
	  potentially leaked ARG4 from Gosub().

	  ARGC is needed if you're using optional argument, to verify whether or
	  not an argument has been passed, else it's possible to use a leaked ARGn
	  from Gosub (app_stack).  So now you can safely do
	  ${IF($[${ARGC}>3]?${ARGV}:default value)} kind of thing.

	  Change-Id: I6ca0b137d90b03f6aa9c496991f6cbf1518f6c24
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-01-13 14:05 +0000 [435d68be97]  Sebastien Duthil <sduthil@wazo.community>

	* app_mixmonitor: Add AMI events MixMonitorStart, -Stop and -Mute.

	  ASTERISK-29244

	  Change-Id: I1862d58264c2c8b5d8983272cb29734b184d67c5

2021-02-01 15:24 +0000 [5699eb7b0f]  Kevin Harwell <kharwell@sangoma.com>

	* AST-2021-002: Remote crash possible when negotiating T.38

	  When an endpoint requests to re-negotiate for fax and the incoming
	  re-invite is received prior to Asterisk sending out the 200 OK for
	  the initial invite the re-invite gets delayed. When Asterisk does
	  finally send the re-inivite the SDP includes streams for both audio
	  and T.38.

	  This happens because when the pending topology and active topologies
	  differ (pending stream is not in the active) in the delayed scenario
	  the pending stream is appended to the active topology. However, in
	  the fax case the pending stream should replace the active.

	  This patch makes it so when a delay occurs during fax negotiation,
	  to or from, the audio stream is replaced by the T.38 stream, or vice
	  versa instead of being appended.

	  Further when Asterisk sent the re-invite with both audio and T.38,
	  and the endpoint responded with a declined T.38 stream then Asterisk
	  would crash when attempting to change the T.38 state.

	  This patch also puts in a check that ensures the media state has a
	  valid fax session (associated udptl object) before changing the
	  T.38 state internally.

	  ASTERISK-29203 #close

	  Change-Id: I407f4fa58651255b6a9030d34fd6578cf65ccf09

2021-01-26 11:09 +0000 [c98de279b2]  Alexander Traud <pabstraud@compuserve.com>

	* rtp:  Enable srtp replay protection

	  Add option "srtpreplayprotection" rtp.conf to enable srtp
	  replay protection.

	  ASTERISK-29260
	  Reported by: Alexander Traud

	  Change-Id: I5cd346e3c6b6812039d1901aa4b7be688173b458

2020-12-28 06:43 +0000 [872c1786e6]  Ivan Poddubnyi <ivan.poddubny@gmail.com>

	* res_pjsip_diversion: Fix adding more than one histinfo to Supported

	  New responses sent within a PJSIP sessions are based on those that were
	  sent before. Therefore, adding/modifying a header once causes it to be
	  sent on all responses that follow.

	  Sending 181 Call Is Being Forwarded many times first adds "histinfo"
	  duplicated more and more, and eventually overflows past the array
	  boundary.

	  This commit adds a check preventing adding "histinfo" more than once,
	  and skipping it if there is no more space in the header.

	  Similar overflow situations can also occur in res_pjsip_path and
	  res_pjsip_outbound_registration so those were also modified to
	  check the bounds and suppress duplicate Supported values.

	  ASTERISK-29227
	  Reported by: Ivan Poddubny

	  Change-Id: Id43704a1f1a0293e35cc7f844026f0b04f2ac322

2020-12-11 14:49 +0000 [76125bec4a]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk.c: Fix signed mismatch that leads to overflow

	  ASTERISK-29205 #close

	  Change-Id: Ib7aa65644e8df76e2378d7613ee7cf751b9d0bea

2021-02-05 05:26 +0000 [5a4531782c]  Joshua C. Colp <jcolp@sangoma.com>

	* pjsip: Make modify_local_offer2 tolerate previous failed SDP.

	  If a remote side is broken and sends an SDP that can not be
	  negotiated the call will be torn down but there is a window
	  where a second 183 Session Progress or 200 OK that is forked
	  can be received that also attempts to negotiate SDP. Since
	  the code marked the SDP negotiation as being done and complete
	  prior to this it assumes that there is an active local and remote
	  SDP which it can modify, while in fact there is not as the SDP
	  did not successfully negotiate. Since there is no local or remote
	  SDP a crash occurs.

	  This patch changes the pjmedia_sdp_neg_modify_local_offer2
	  function to no longer assume that a previous SDP negotiation
	  was successful.

	  ASTERISK-29196

	  Change-Id: I22de45916d3b05fdc2a67da92b3a38271ee5949e

2021-02-09 11:25 +0000 [3be7de5b11]  George Joseph <gjoseph@digium.com>

	* res_pjsip_refer: Always serialize calls to refer_progress_notify

	  refer_progress_notify wasn't always being called from the progress
	  serializer.  This could allow clearing notification->progress->sub
	  in one thread while another was trying to use it.

	  * Instances where refer_progress_notify was being called in-line,
	    have been changed to use ast_sip_push_task().

	  Change-Id: Idcf1934c4e873f2c82e2d106f8d9f040caf9fa1e

2021-01-11 14:20 +0000 [215550ed4b]  Ben Ford <bford@digium.com>

	* core_unreal: Fix T.38 faxing when using local channels.

	  After some changes to streams and topologies, receiving fax through
	  local channels stopped working. This change adds a stream topology with
	  a stream of type IMAGE to the local channel pair and allows fax to be
	  received.

	  ASTERISK-29035 #close

	  Change-Id: Id103cc5c9295295d8e68d5628e76220f8f17e9fb

2021-02-02 02:33 +0000 [f996c7a48f]  Boris P. Korzun <drtr0jan@yandex.ru>

	* format_wav: Support of MIME-type for wav16

	  Provided a support of a MIME-type for wav16. Added new MIME-type
	  for classic wav.

	  ASTERISK-29275 #close

	  Change-Id: I749bda287ba1ab20c1e0af5e4c0153817d47873b

2021-02-05 02:33 +0000 [2bcec10db8]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Allow [peer] without audio (text+video).

	  Two previous commits, 620d9f4 and 6d980de, allow to set up a call
	  without audio, again. That was introduced originally with commit f04d5fb
	  but changed and broke over time. The original commit missed one
	  scenario: A [peer] section in sip.conf, which does not allow audio at
	  all. In that case, chan_sip rejected the call, although even when the
	  requester offered no audio. Now, chan_sip does not check whether there
	  is no audio format but checks whether there is no format in general. In
	  other words, if there is at least one format to offer, the call succeeds.

	  However, to prevent calls with no-audio, chan_sip still rejects calls
	  when both call parties (caller = requester of the call *and* callee =
	  [peer] section in sip.conf) included audio. In such a case, it is
	  expected that the call should have audio.

	  ASTERISK-29280

	  Change-Id: I0fb74faf51ef22a60c10b467df6a4d1c1943b73e

2021-01-28 12:02 +0000 [10c2e1749b]  George Joseph <gjoseph@digium.com>

	* chan_iax2.c: Require secret and auth method if encryption is enabled

	  If there's no secret specified for an iax2 peer and there's no secret
	  specified in the dial string, Asterisk will crash if the auth method
	  requested by the peer is MD5 or plaintext.  You also couldn't specify
	  a default auth method in the [general] section of iax.conf so if you
	  don't have static peers defined and just use the dial string, Asterisk
	  will still crash even if you have a secret specified in the dial string.

	  * Added logic to iax2_call() and authenticate_reply() to print
	    a warning and hanhup the call if encryption is requested and
	    there's no secret or auth method.  This prevents the crash.

	  * Added the ability to specify a default "auth" in the [general]
	    section of iax.conf.

	  ASTERISK-29624
	  Reported by: N A

	  Change-Id: I5928e16137581f7d383fcc7fa04ad96c919e6254

2021-02-03 12:53 +0000 [62ca911d29]  Sean Bright <sean.bright@gmail.com>

	* app_read: Release tone zone reference on early return.

	  Change-Id: I350939f2220f9e5d44ddf4c8d9a4c99fde4d169a

2021-01-27 11:42 +0000 [4a341f288d]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Set up calls without audio (text+video), again.

	  The previous commit 6d980de fixed this issue in the core of Asterisk.
	  With that, each channel technology can be used without audio
	  theoretically. Practically, the channel-technology driver chan_sip
	  turned out to have an invalid check preventing that. chan_sip tested
	  whether there is at least one audio format. However, chan_sip has to
	  test whether there is at least one format. More cannot be tested while
	  requesting chan_sip because only the [general] capabilities but not the
	  [peer] caps are known yet. And the [peer] caps might not be a subset or
	  show any intersection with the [general] caps. This change here fixes
	  this.

	  The original commit f04d5fb, thirteen years ago, contained a software
	  bug as it passed ANY audio capability to the channel-technology driver.
	  Instead, it should have passed NO audio format. Therefore, this
	  addressed issue here was not noticed in Asterisk 1.6.x and Asterisk 1.8.
	  Then, Asterisk 10 changed that from ANY to NO, but nobody reported since
	  then.

	  ASTERISK-29265

	  Change-Id: Ic16a3bf13cd1b5c4fc4041ed74961177d96b600f

2021-01-22 09:12 +0000 [a5364ac69b]  Dan Cropp <dan@amtelco.com>

	* chan_pjsip, app_transfer: Add TRANSFERSTATUSPROTOCOL variable

	  When a Transfer/REFER is executed, TRANSFERSTATUSPROTOCOL variable is
	  0 when no protocl specific error
	  SIP example of failure, 3xx-6xx for the SIP error code received

	  This allows applications to perform actions based on the failure
	  reason.

	  ASTERISK-29252 #close
	  Reported-by: Dan Cropp

	  Change-Id: Ia6a94784b4925628af122409cdd733c9f29abfc4

2021-01-22 02:54 +0000 [8a2f0fbbd1]  Alexander Traud <pabstraud@compuserve.com>

	* channel: Set up calls without audio (text+video), again.

	  ASTERISK-29259

	  Change-Id: Ib6a6550e0e08355745d66da8e60ef49e81f9c6c5

2021-01-22 07:41 +0000 [97400d063d]  Mark Petersen <bugs.digium.com@zombie.dk>

	* res/res_pjsip.c: allow user=phone when number contain *#

	  if From number contain * or # asterisk will not add user=phone

	  Currently only number that uses AST_DIGIT_ANYNUM can have "user=phone" but the validation should use AST_DIGIT_ANY
	  this is a problem when you want to send call to ISUP
	  as they will disregard the From header and either replace From with anonymous or with p-asserted-identity

	  ASTERISK-29261
	  Reported by: Mark Petersen
	  Tested by: Mark Petersen

	  Change-Id: I3307bdbf757582740bfee4110e85f7b6c9291cc4

2021-01-22 11:17 +0000 [0a5141f2f3]  Ivan Poddubnyi <ivan.poddubny@gmail.com>

	* main/frame: Add missing control frame names to ast_frame_subclass2str

	  Log proper control frame names instead of "Unknown control '14'", etc.

	  Change-Id: I1724f2f4d1b064b25a5c93a7da0cb03be5143935

2021-01-21 13:28 +0000 [7dc0cded86]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: SDP: Reject audio streams correctly.

	  This completes the fix for ASTERISK_24543. Only when the call is an
	  outgoing call, consult and append the configured format capabilities
	  (p->caps). When all audio formats got rejected the negotiated format
	  capabilities (p->jointcaps) contain no audio formats for incoming
	  calls. This is required when there are other accepted media streams.

	  ASTERISK-29258

	  Change-Id: I8bab31c7f3f3700dce204b429ad238a524efebb9

2021-01-23 07:15 +0000 [e78239e6f5]  Boris P. Korzun <drtr0jan@yandex.ru>

	* res_musiconhold: Add support of various URL-schemes by MoH.

	  Provided a support of variuos URL-schemes for res_musiconhold,
	  registered by ast_bucket_scheme_register().

	  ASTERISK-29262 #close

	  Change-Id: If0ea8697587353dce358a70035d82649fd4632b6

2020-12-22 04:42 +0000 [ff037a135c]  Robert Cripps <rcripps@voxbone.com>

	* res/res_pjsip_session.c: Check that media type matches in
	  function ast_sip_session_media_state_add.

	  Check ast_media_type matches when a ast_sip_session_media is found
	  otherwise when transitioning from say image to audio, the wrong
	  session is returned in the first if statement.

	  ASTERISK-29220 #close

	  Change-Id: I6f6efa9b821ebe8881bb4c8c957f8802ddcb4b5d

2021-01-08 10:02 +0000 [aa03d07a08]  Jaco Kroon <jaco@uls.co.za>

	* AC_HEADER_STDC causes a compile failure with autoconf 2.70

	  From https://www.mail-archive.com/bug-autoconf@gnu.org/msg04408.html

	  > ... the long-obsolete AC_HEADER_STDC, previously used internally by
	  > AC_INCLUDES_DEFAULT, used AC_EGREP_HEADER.  The AC_HEADER_STDC macro
	  > is now a no-op (and is not used at all within Autoconf anymore), so
	  > that change is likely what made the first use of AC_EGREP_HEADER the
	  > one inside the if condition, causing the observed results.

	  The implication is that the test does nothing anyway, and due to it
	  being a no-op from 2.70 onwards, results in the required not being set
	  to yes, resulting in ./configure to fail.

	  Change-Id: Ic1ff38d87f791fbf1f2a80512f81bb7110392460
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2021-01-15 03:33 +0000 [6915106cc1]  Alexander Traud <pabstraud@compuserve.com>

	* pjsip_scheduler: Fix pjsip show scheduled_tasks like for compiler Clang.

	  Otherwise, Clang 10 warned because of logical-not-parentheses.

	  Change-Id: Ia8fb493f727b08070eb2dcf520c08df34ed11d79

2021-01-15 05:09 +0000 [3b1cab26a5]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip_session: Avoid sometimes-uninitialized warning with Clang.

	  ASTERISK-29248

	  Change-Id: I2b17bd5ffb246bc64c463402c9831413da78a556

2021-01-11 14:25 +0000 [0520f8320c]  Ben Ford <bford@digium.com>

	* chan_pjsip.c: Add parameters to frame in indicate.

	  There are a couple of parameters (datalen and data) that do not get set
	  in chan_pjsip_indicate which could cause an Invalid message to pop up
	  for things such as fax. This patch adds them to the frame.

	  Change-Id: Ia51be086a0708be905e73d1f433572c49c7e38f8

2021-01-14 08:47 +0000 [2c533dc76f]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_pubsub: Fix truncation of persisted SUBSCRIBE packet

	  The last argument to ast_copy_string() is the buffer size, not the
	  number of characters, so we add 1 to avoid stamping out the final \n
	  in the persisted SUBSCRIBE message.

	  Change-Id: I019b78942836f57965299af15d173911fcead5b2

2021-01-14 16:20 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.16.0-rc1 Released.

2021-01-14 09:51 +0000 [6056818467]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.16.0
2020-12-30 07:56 +0000 [45e1d89135]  Jean Aunis <jean.aunis@prescom.fr>

	* Stasis/messaging: tech subscriptions conflict with endpoint subscriptions.

	  When both a tech subscription and an endpoint subscription exist for a given
	  endpoint, TextMessageReceived events are dispatched to the tech subscription
	  only.

	  ASTERISK-29229

	  Change-Id: I9eac4cba5f9e27285a282509395347abc58fc2b8

2020-12-23 08:44 +0000 [34b0960310]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: SDP: Sidestep stream parsing when its media is disabled.

	  Previously, chan_sip parsed all known media streams in an SDP offer
	  like video (and text) even when videosupport=no (and textsupport=no).
	  This wasted processor power. Furthermore, chan_sip accepted SDP offers,
	  including no audio but just video (or text) streams although
	  videosupport=no (or textsupport=no). Finally, chan_sip denied the whole
	  offer instead of individual streams when they had encryption (SDES-sRTP)
	  unexpectedly enabled.

	  ASTERISK-29238
	  ASTERISK-29237
	  ASTERISK-29222

	  Change-Id: Ie49e4e2a11f0265f914b684738348ba8c0f89755

2020-12-29 12:16 +0000 [97afc9055f]  Ivan Poddubnyi <ivan.poddubny@gmail.com>

	* chan_pjsip: Assign SIPDOMAIN after creating a channel

	  session->channel doesn't exist until chan_pjsip creates it, so intead of
	  setting a channel variable every new incoming call sets one and the same
	  global variable.

	  This patch moves the code to chan_pjsip so that SIPDOMAIN is set on
	  a newly created channel, it also removes a misleading reference to
	  channel->session used to fetch call pickup configuraion.

	  ASTERISK-29240

	  Change-Id: I90c9bbbed01f5d8863585631a29322ae4e046755

2020-12-31 05:53 +0000 [17fa9c93d0]  Ivan Poddubnyi <ivan.poddubny@gmail.com>

	* chan_pjsip: Stop queueing control frames twice on outgoing channels

	  The fix for ASTERISK-27902 made chan_pjsip process SIP responses twice.
	  This resulted in extra noise in logs (for example, "is making progress"
	  and "is ringing" get logged twice by app_dial), as well as in noise in
	  signalling: one incoming 183 Session Progress results in 2 outgoing 183-s.

	  This change splits the response handler into 2 functions:
	   - one for updating HANGUPCAUSE, which is still called twice,
	   - another that does the rest, which is called only once as before.

	  ASTERISK-28016
	  Reported-by: Alex Hermann

	  ASTERISK-28549
	  Reported-by: Gant Liu

	  ASTERISK-28185
	  Reported-by: Julien

	  Change-Id: I0a1874be5bb5ed12d572d17c7f80de6e5e542940

2020-12-23 11:41 +0000 [7df88c98d0]  Jaco Kroon <jaco@uls.co.za>

	* contrib/systemd: Added note on common issues with systemd and asterisk

	  With newer version of linux /var/run/ is a symlink to /run/ that has
	  been turned into tmpfs.

	  Added note that if asterisk has to bind to a specific IP that
	  systemd has to wait until the network is up.

	  Added note on how to make sure that the environment variable
	  HOSTNAME is included.

	  ASTERISK-29216
	  Reported by: Mark Petersen
	  Tested by: Mark Petersen

	  Change-Id: Ib3e560655befd3e99eec743687144f5569533379

2021-01-07 08:39 +0000 [7ed20b9d3b]  George Joseph <gjoseph@digium.com>

	* Revert "res_pjsip_outbound_registration.c:  Use our own scheduler and other stuff"

	  This reverts commit e1fd51cd2c183a3eb61803f52277d1a7d7a18c9c.

	  Reason for revert: Too many issues reported.  Need to research and correct.

	  ASTERISK-29230
	  ASTERISK-29231
	  Reported by: Michael Maier

	  Change-Id: Ie2356c1cd74436603600599885286b98055b8a17

2020-12-23 11:41 +0000 [aca435dfe7]  Jaco Kroon <jaco@uls.co.za>

	* pbx_lua:  Add LUA_VERSIONS environment variable to ./configure.

	  On Gentoo it's possible to have multiple lua versions installed, all
	  with a path of /usr, so it's not possible to use the current --with-lua
	  option to determisticly pin to a specific version as is required by the
	  Gentoo PMS standards.

	  This environment variable allows to lock to specific versions,
	  unversioned check will be skipped if this variable is supplied.

	  Change-Id: I8c403eda05df25ee0193960262ce849c7d2fd088
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2020-12-18 13:06 +0000 [32e36144c7]  Jaco Kroon <jaco@uls.co.za>

	* func_lock: fix multiple-channel-grant problems.

	  Under contention it becomes possible that multiple channels will be told
	  they successfully obtained the lock, which is a bug.  Please refer

	  ASTERISK-29217

	  This introduces a couple of changes.

	  1.  Replaces requesters ao2 container with simple counter (we don't
	      really care who is waiting for the lock, only how many).  This is
	      updated undex ->mutex to prevent memory access races.
	  2.  Correct semantics for ast_cond_timedwait() as described in
	      pthread_cond_broadcast(3P) is used (multiple threads can be released
	      on a single _signal()).
	  3.  Module unload races are taken care of and memory properly cleaned
	      up.

	  Change-Id: I6f68b5ec82ff25b2909daf6e4d19ca864a463e29
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2020-12-07 16:59 +0000 [e127a57761]  Dan Cropp <dan@amtelco.com>

	* chan_pjsip: Incorporate channel reference count into transfer_refer().

	  Add channel reference count for PJSIP REFER. The call could be terminated
	  prior to the result of the transfer. In that scenario, when the SUBSCRIBE/NOTIFY
	  occurred several minutes later, it would attempt to access a session which was
	  no longer valid.  Terminate event subscription if pjsip_xfer_initiate() or
	  pjsip_xfer_send_request() fails in transfer_refer().

	  ASTERISK-29201 #close
	  Reported-by: Dan Cropp

	  Change-Id: I3fd92fd14b4e3844d3d7b0f60fe417a4df5f2435

2020-12-23 13:06 +0000 [e96f744816]  Kevin Harwell <kharwell@sangoma.com>

	* app_mixmonitor: cleanup datastore when monitor thread fails to launch

	  launch_monitor_thread is responsible for creating and initializing
	  the mixmonitor, and dependent data structures. There was one off
	  nominal path after the datastore gets created that triggers when
	  the channel being monitored is hung up prior to monitor starting
	  itself.

	  If this happened the monitor thread would not "launch", and the
	  mixmonitor object and associated objects are freed, including the
	  underlying datastore data object. However, the datastore itself was
	  not removed from the channel, so when the channel eventually gets
	  destroyed it tries to access the previously freed datastore data
	  and crashes.

	  This patch removes and frees datastore object itself from the channel
	  before freeing the mixmonitor object thus ensuring the channel does
	  not call it when destroyed.

	  ASTERISK-28947 #close

	  Change-Id: Id4f9e958956d62473ed5ff06c98ae3436e839ff8

2020-12-24 09:03 +0000 [2b7af3eb27]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: Prevent deadlocks when out of ODBC database connections

	  ASTERISK-28992 #close

	  Change-Id: Ia7d608924036139ee2520b840d077762d02668d0

2020-12-18 09:16 +0000 [4c5bffb217]  Sean Bright <sean.bright@gmail.com>

	* asterisk: Export additional manager functions

	  Rename check_manager_enabled() and check_webmanager_enabled() to begin
	  with ast_ so that the symbols are automatically exported by the
	  linker.

	  ASTERISK~29184

	  Change-Id: I85762b9a5d14500c15f6bad6507138c8858644c9

2020-12-26 11:42 +0000 [89cf7899be]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Fix compiler warnings.

	  AST_VECTOR_SIZE() returns a size_t.  This is not always equivalent to an
	  unsigned long on all machines.

	  Change-Id: I0a4189a104e6e3a2e2273de06620eaef19df9338

2020-12-13 06:03 +0000 [ab3f57d88f]  Sungtae Kim <pchero21@gmail.com>

	* res_pjsip_session: Fixed NULL active media topology handle

	  Added NULL pointer check to prevent Asterisk crash.

	  ASTERISK-29215

	  Change-Id: If07e50ea8d78cb610af9195fc13b5dca4bfcef95

2020-12-22 02:58 +0000 [9196e0d1d5]  Torrey Searle <tsearle@voxbone.com>

	* res/res_pjsip_diversion: prevent crash on tel: uri in History-Info

	  Add a check to see if the URI is a Tel URI and prevent crashing on
	  trying to retrieve the reason parameter.

	  ASTERISK-29191
	  ASTERISK-29219

	  Change-Id: I0320aa205f22cda511d60a2edf2b037e8fd6cc37

2020-12-11 13:27 +0000 [0a23296834]  Sean Bright <sean.bright@gmail.com>

	* app_chanspy: Spyee information missing in ChanSpyStop AMI Event

	  The documentation in the wiki says there should be spyee-channel
	  information elements in the ChanSpyStop AMI event.

	      https://wiki.asterisk.org/wiki/x/Xc5uAg

	  However, this is not the case in Asterisk <= 16.10.0 Version. We're
	  using these Spyee* arguments since Asterisk 11.x, so these arguments
	  vanished in Asterisk 12 or higher.

	  For maximum compatibility, we still send the ChanSpyStop event even if
	  we are not able to find any 'Spyee' information.

	  ASTERISK-28883 #close

	  Change-Id: I81ce397a3fd614c094d043ffe5b1b1d76188835f

2020-11-30 19:27 +0000 [a47e6965b3]  Sungtae Kim <pchero21@gmail.com>

	* res_ari: Fix wrong media uri handle for channel play

	  Fixed wrong null object handle in
	  /channels/<channel_id>/play request handler.

	  ASTERISK-29188

	  Change-Id: I6691c640247a51ad15f23e4a203ca8430809bafe

2020-12-10 09:09 +0000 [5a2867efa9]  George Joseph <gjoseph@digium.com>

	* logger.c: Automatically add a newline to formats that don't have one

	  Scope tracing allows you to not specify a format string or
	  variable, in which case it just prints the indent, file,
	  function, and line number.  The trace output automatically
	  adds a newline to the end in this case.  If you also have
	  debugging turned on for the module, a debug message is
	  also printed but the standard log functionality which
	  prints it doesn't add the newline so you have messages
	  that don't break correctly.

	   * format_log_message_ap(), which is the common log
	     message formatter for all channels, now adds a
	     newline to the end of format strings that don't
	     already have a newline.

	  ASTERISK-29209
	  Reported by: Alexander Traud

	  Change-Id: I994a7df27f88df343b7d19f3e81a4b562d9d41da

2020-12-08 11:37 +0000 [11def974a8]  Pirmin Walthert <infos@nappsoft.ch>

	* res_pjsip_nat.c: Create deep copies of strings when appropriate

	  In rewrite_uri asterisk was not making deep copies of strings when
	  changing the uri. This was in some cases causing garbage in the route
	  header and in other cases even crashing asterisk when receiving a
	  message with a record-route header set. Thanks to Ralf Kubis for
	  pointing out why this happens. A similar problem was found in
	  res_pjsip_transport_websocket.c. Pjproject needs as well to be patched
	  to avoid garbage in CANCEL messages.

	  ASTERISK-29024 #close

	  Change-Id: Ic5acd7fa2fbda3080f5f36ef12e46804939b198b

2020-12-16 06:17 +0000 [7e4bb4ed11]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_pidf_digium_body_supplement: Support Sangoma user agent.

	  This adds support for both Digium and Sangoma user agent strings
	  for the Sangoma specific body supplement.

	  Change-Id: Ib99362b24b91d3cbe888d8b2fce3fad5515d9482

2020-12-10 17:06 +0000 [bb46595799]  Nathan Bruning <nathan@iperity.com>

	* res_musiconhold: Don't crash when real-time doesn't return any entries

	  ASTERISK-29211 #close

	  Change-Id: Ifbf0a4f786ab2a52342f9d1a1db4c9907f069877

2020-10-29 06:25 +0000 [8d2558209b]  laszlovl <digium@lvlconsultancy.nl>

	* Introduce astcachedir, to be used for temporary bucket files

	  As described in the issue, /tmp is not a suitable location for a
	  large amount of cached media files, since most distributions make
	  /tmp a RAM-based tmpfs mount with limited capacity.

	  I opted for a location that can be configured separately, as opposed
	  to using a subdirectory of spooldir, given the different storage
	  profile (transient files vs files that might stay there indefinitely).

	  This commit just makes the cache directory configurable, but leaves
	  it at /tmp by default, to ensure backwards compatibility.

	  A future commit that only targets master could change the default
	  location to something more sensible such as /var/tmp/asterisk. At
	  that point, the cachedir could be created and cleaned up during
	  uninstall by the Makefile script.

	  ASTERISK-29143

	  Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d

2020-10-29 12:21 +0000 [ea744ca7c2]  Joshua C. Colp <jcolp@sangoma.com>

	* pjsip: Match lifetime of INVITE session to our session.

	  In some circumstances it was possible for an INVITE
	  session to be destroyed while we were still using it.
	  This occurred due to the reference on the INVITE session
	  being released internally as a result of its state
	  changing to DISCONNECTED.

	  This change adds a reference to the INVITE session
	  which is released when our own session is destroyed,
	  ensuring that the INVITE session remains valid for
	  the lifetime of our session.

	  ASTERISK-29022

	  Change-Id: I300c6d9005ff0e6efbe1132daefc7e47ca6228c9

2020-11-21 11:51 +0000 [0c185c9e21]  Sean Bright <sean.bright@gmail.com>

	* res_http_media_cache.c: Set reasonable number of redirects

	  By default libcurl does not follow redirects, so we explicitly enable
	  it by setting CURLOPT_FOLLOWLOCATION. Once that is enabled, libcurl
	  will follow up to CURLOPT_MAXREDIRS redirects, which by default is
	  configured to be unlimited.

	  This patch sets CURLOPT_MAXREDIRS to a more reasonable default (8). If
	  we determine at some point that this needs to be increased on
	  configurable it is a trivial change.

	  ASTERISK-29173 #close

	  Change-Id: I4925ebbcf0c7d728bb9252b3795b3479ae225b30

2020-11-23 14:56 +0000 [ddbf3a7f73]  Sean Bright <sean.bright@gmail.com>

	* media_cache: Fix reference leak with bucket file metadata

	  Change-Id: Ia0e4124110df613ce5fdfa9ef8780016ebaa52c6

2020-11-24 00:55 +0000 [159522003a]  Stanislav <stas.abramenkov@gmail.com>

	* res_pjsip_stir_shaken: Fix module description

	  the 'J' is missing in module description.
	  "PSIP STIR/SHAKEN Module for Asterisk" -> "PJSIP STIR/SHAKEN Module for Asterisk"

	  ASTERISK-29175 #close

	  Change-Id: I17da008540ee2e8496b644d05f995b320b54ad7a

2020-10-12 05:30 +0000 [15566494f9]  Joshua C. Colp <jcolp@sangoma.com>

	* voicemail: add option 'e' to play greetings as early media

	  When using this option, answering the channel is deferred until
	  all prompts/greetings have been played and the caller is about
	  to leave their message.

	  ASTERISK-29118 #close

	  Change-Id: I41b9f0428783c0bd697c8c994f906d1e75ce9ddb

2020-11-02 02:02 +0000 [4c79bc19d1]  Alexander Traud <pabstraud@compuserve.com>

	* loader: Sync load- and build-time deps.

	  In MODULEINFO, each depend has to be listed in .requires of AST_MODULE_INFO.

	  ASTERISK-29148

	  Change-Id: I254dd33194ae38d2877b8021c57c2a5deb6bbcd2

2020-11-18 13:11 +0000 [a360150ee0]  Sean Bright <sean.bright@gmail.com>

	* CHANGES: Remove already applied CHANGES update

	  Change-Id: Iee7163bc732d58c5cbaa2cfab1f5aab4a412060a

2020-11-04 07:39 +0000 [f667c5a781]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Remove unused sip_socket->port.

	  12 years ago, with ASTERISK_12115 the last four get/uses of socket.port
	  vanished. However, the struct member itself and all seven set/uses
	  remained as dead code.

	  ASTERISK-28798

	  Change-Id: Ib90516a49eca3d724a70191278aaf2144fb58c59

2020-11-17 14:19 +0000 [a8f6238cc8]  Alexander Greiner-Baer <alex+asterisk@greiner-baer.de>

	* res_pjsip: set Accept-Encoding to identity in OPTIONS response

	  RFC 3261 says that the Accept-Encoding header should be present
	  in an options response. Permitted values according to RFC 2616
	  are only compression algorithms like gzip or the default identity
	  encoding. Therefore "text/plain" is not a correct value here.
	  As long as the header is hard coded, it should be set to "identity".

	  Without this fix an Alcatel OmniPCX periodically logs warnings like
	  "[sip_acceptIncorrectHeader] Header Accept-Encoding is malformed"
	  on a SIP Trunk.

	  ASTERISK-29165 #close

	  Change-Id: I0aa2211ebf0b4c2ed554ac7cda794523803a3840

2020-11-13 06:19 +0000 [89d3de37ca]  Boris P. Korzun <drtr0jan@yandex.ru>

	* bridge_basic: Fixed setup of recall channels

	  Fixed a bug (like a typo) in retransfer_enter()
	  at main/bridge_basic.c:2641. common_recall_channel_setup() setups
	  common things on the recalled transfer target, but used same target
	  as source instead trasfered.

	  ASTERISK-29161 #close

	  Change-Id: Ieb549654a621c38b1ad5e9d15b9f18823d9cc31f

2020-11-16 04:38 +0000 [d1a78e047d]  Alexander Traud <pabstraud@compuserve.com>

	* modules.conf: Align the comments for more conclusiveness.

	  Change-Id: I79cc693cd5a6e5dd7d403b7e91d970ff1ddf8306

2020-11-11 08:55 +0000 [8d8c9db618]  George Joseph <gjoseph@digium.com>

	* app_queue: Fix deadlock between update and show queues

	  Operations that update queues when shared_lastcall is set lock the
	  queue in question, then have to lock the queues container to find the
	  other queues with the same member. On the other hand, __queues_show
	  (which is called by both the CLI and AMI) does the reverse. It locks
	  the queues container, then iterates over the queues locking each in
	  turn to display them.  This creates a deadlock.

	  * Moved queue print logic from __queues_show to a separate function
	    that can be called for a single queue.

	  * Updated __queues_show so it doesn't need to lock or traverse
	    the queues container to show a single queue.

	  * Updated __queues_show to snap a copy of the queues container and iterate
	    over that instead of locking the queues container and iterating over
	    it while locked.  This prevents us from having to hold both the
	    container lock and the queue locks at the same time.  This also
	    allows us to sort the queue entries.

	  ASTERISK-29155

	  Change-Id: I78d4dc36728c2d7bc187b97d82673fc77f2bcf41

2020-11-12 12:03 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.15.0-rc1 Released.

2020-11-12 05:48 +0000 [3366956139]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.15.0
2020-11-02 13:53 +0000 [e1fd51cd2c]  George Joseph <gjoseph@digium.com>

	* res_pjsip_outbound_registration.c:  Use our own scheduler and other stuff

	  * Instead of using the pjproject timer heap, we now use our own
	    pjsip_scheduler.  This allows us to more easily debug and allows us to
	    see times in "pjsip show/list registrations" as well as being able to
	    see the registrations in "pjsip show scheduled_tasks".

	  * Added the last registration time, registration interval, and the next
	    registration time to the CLI output.

	  * Removed calls to pjsip_regc_info() except where absolutely necessary.
	    Most of the calls were just to get the server and client URIs for log
	    messages so we now just save them on the client_state object when we
	    create it.

	  * Added log messages where needed and updated most of the existong ones
	    to include the registration object name at the start of the message.

	  Change-Id: I4534a0fc78c7cb69f23b7b449dda9748c90daca2

2020-11-02 13:53 +0000 [80f116c156]  George Joseph <gjoseph@digium.com>

	* pjsip_scheduler.c: Add type ONESHOT and enhance cli show command

	  * Added a ONESHOT type that never reschedules.

	  * Added "like" capability to "pjsip show scheduled_tasks" so you can do
	    the following:

	    CLI> pjsip show scheduled_tasks like outreg
	    PJSIP Scheduled Tasks:

	    Task Name                                     Interval  Times Run ...
	    ============================================= ========= ========= ...
	    pjsip/outreg/testtrunk-reg-0-00000074            50.000   oneshot ...
	    pjsip/outreg/voipms-reg-0-00000073              110.000   oneshot ...

	  * Fixed incorrect display of "Next Start".

	  * Compacted the displays of times in the CLI.

	  * Added two new functions (ast_sip_sched_task_get_times2,
	    ast_sip_sched_task_get_times_by_name2) that retrieve the interval,
	    next start time, and next run time in addition to the times already
	    returned by ast_sip_sched_task_get_times().

	  Change-Id: Ie718ca9fd30490b8a167bedf6b0b06d619dc52f3

2020-10-02 14:32 +0000 [728cd55cde]  Alexei Gradinari <alex2grad@gmail.com>

	* sched: AST_SCHED_REPLACE_UNREF can lead to use after free of data

	  The data can be freed if the old object '_data' is the same object as
	  new 'data'. Because at first the object is unreferenced which can lead
	  to destroying it.

	  This could happened in res_pjsip_pubsub when the publication is updated
	  which could lead to segfault in function publish_expire.

	  Change-Id: I0164f57c387243510bdbd2f8dcf33377b6c202da

2020-10-30 11:43 +0000 [ddfb76a864]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip/config_transport: Load and run without OpenSSL.

	  ASTERISK-28933
	  Reported-by: Walter Doekes

	  Change-Id: I65eac49e5b0a79261ea80e2b9b38a836886ed59f

2020-10-30 05:53 +0000 [277aa0ced6]  Alexander Traud <pabstraud@compuserve.com>

	* res_stir_shaken: Include OpenSSL headers where used actually.

	  This avoids the inclusion of the OpenSSL headers in the public header,
	  which avoids one external library dependency in res_pjsip_stir_shaken.

	  Change-Id: I6a07e2d81d2b5442e24e99b8cc733a99f881dcf4

2020-10-18 13:40 +0000 [5046e1fb06]  Dovid Bender <dovid@telecurve.com>

	* func_curl.c: Allow user to set what return codes constitute a failure.

	  Currently any response from res_curl where we get an answer from the
	  web server, regardless of what the response is (404, 403 etc.) Asterisk
	  currently treats it as a success. This patch allows you to set which
	  codes should be considered as a failure by Asterisk. If say we set
	  failurecodes=404,403 then when using curl in realtime if a server gives
	  a 404 error Asterisk will try to failover to the next option set in
	  extconfig.conf

	  ASTERISK-28825

	  Reported by: Dovid Bender
	  Code by: Gobinda Paul

	  Change-Id: I94443e508343e0a3e535e51ea6e0562767639987

2020-10-19 17:21 +0000 [8973fe5cf3]  Kevin Harwell <kharwell@digium.com>

	* AST-2020-001 - res_pjsip: Return dialog locked and referenced

	  pjproject returns the dialog locked and with a reference. However,
	  in Asterisk the method that handles this decrements the reference
	  and removes the lock prior to returning. This makes it possible,
	  under some circumstances, for another thread to free said dialog
	  before the thread that created it attempts to use it again. Of
	  course when the thread that created it tries to use a freed dialog
	  a crash can occur.

	  This patch makes it so Asterisk now returns the newly created
	  dialog both locked, and with an added reference. This allows the
	  caller to de-reference, and unlock the dialog when it is safe to
	  do so.

	  In the case of a new SIP Invite the lock, and reference are now
	  held for the entirety of the new invite handling process.
	  Otherwise it's possible for the dialog, or its dependent objects,
	  like the transaction, to disappear. For example if there is a TCP
	  transport error.

	  ASTERISK-29057 #close

	  Change-Id: I5ef645a47829596f402cf383dc02c629c618969e

2020-11-02 10:29 +0000 [58aa6a7057]  Ben Ford <bford@digium.com>

	* AST-2020-002 - res_pjsip: Stop sending INVITEs after challenge limit.

	  If Asterisk sends out an INVITE and receives a challenge with a
	  different nonce value each time, it will continuously send out INVITEs,
	  even if the call is hung up. The endpoint must be configured for
	  outbound authentication for this to occur. A limit has been set on
	  outbound INVITEs so that, once reached, Asterisk will stop sending
	  INVITEs and the transaction will terminate.

	  ASTERISK-29013

	  Change-Id: I2d001ca745b00ca8aa12030f2240cd72363b46f7

2020-10-29 10:21 +0000 [e067d5c8fd]  Sean Bright <sean.bright@gmail.com>

	* sip_to_pjsip.py: Handle #include globs and other fixes

	  * Wildcards in #includes are now properly expanded

	  * Implement operators for Section class to allow sorting

	  ASTERISK-29142 #close

	  Change-Id: I9b9cd95f4cbe5c24506b75d17173c5aa1a83e5df

2020-10-29 08:35 +0000 [13b56c4be6]  Alexander Traud <pabstraud@compuserve.com>

	* Compiler fixes for GCC with -Og

	  ASTERISK-29144

	  Change-Id: I2a72c072083b4492a223c6f9d73d21f4f424db62

2020-10-30 03:46 +0000 [334661601a]  Alexander Traud <pabstraud@compuserve.com>

	* Compiler fixes for GCC when printf %s is NULL

	  ASTERISK-29146

	  Change-Id: Ib04bdad87d729f805f5fc620ef9952f58ea96d41

2020-10-29 08:59 +0000 [92ca48d54c]  Alexander Traud <pabstraud@compuserve.com>

	* Compiler fixes for GCC with -Os

	  ASTERISK-29145

	  Change-Id: I9af705f2b9725c53141aef5d0ff512a1800f073c

2020-10-23 10:26 +0000 [951ce0524d]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: On authentication, pick MD5 for sure.

	  RFC 8760 added new digest-access-authentication schemes. Testing
	  revealed that chan_sip does not pick MD5 if several schemes are offered
	  by the User Agent Server (UAS). This change does not implement any of
	  the new schemes like SHA-256. This change makes sure, MD5 is picked so
	  UAS with SHA-2 enabled, like the service www.linphone.org/freesip, can
	  still be used. This should have worked since day one because SIP/2.0
	  already envisioned several schemes (see RFC 3261 and its augmented BNF
	  for 'algorithm' which includes 'token' as third alternative; note: if
	  'algorithm' was not present, MD5 is still assumed even in RFC 7616).

	  Change-Id: I61ca0b1f74b5ec2b5f3062c2d661cafeaf597fcd

2020-06-04 09:23 +0000 [f98eed17c1]  Walter Doekes <walter+asterisk@wjd.nu>

	* main/say: Work around gcc 9 format-truncation false positive

	  Version: gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0
	  Warning:
	    say.c:2371:24: error: ‘%d’ directive output may be truncated writing
	      between 1 and 11 bytes into a region of size 10
	      [-Werror=format-truncation=]
	    2371 |     snprintf(buf, 10, "%d", num);
	    say.c:2371:23: note: directive argument in the range [-2147483648, 9]

	  That's not possible though, as the if() starts out checking for (num < 0),
	  making this Warning a false positive.

	  (Also replaced some else<TAB>if with else<SP>if while in the vicinity.)

	  Change-Id: Ic7a70120188c9aa525a6d70289385bfce878438a

2020-10-19 15:31 +0000 [92e1de458a]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip, res_pjsip_session: initialize local variables

	  This patch initializes a couple of local variables to some default values.
	  Interestingly, in the 'pj_status_t dlg_status' case the value not being
	  initialized caused memory to grow, and not be recovered, in the off nominal
	  path (at least on my machine).

	  Change-Id: I22ee65e1e1bff8efacea8a167c6c8428898523f7

2020-10-23 09:55 +0000 [65426f4312]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Add GMime 3.0.

	  Ubuntu 20.10 does not come with GMime 2.6. Ubuntu 16.04 LTS does not
	  come with GMime 3.0. aptitude ignores any missing package. Therefore,
	  it installs the correct package(s). However, in Ubuntu 18.04 LTS and
	  Ubuntu 20.04 LTS, both versions are installed alongside although only
	  one is really needed.

	  Change-Id: Ic58aa9f2e131d94671f286f17dbd61e1ccbabcb7

2020-10-23 09:49 +0000 [fb721ce82c]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable Lua 5.4.

	  Note to maintainers: Lua 5.4, Lua 5.3, and Lua 5.2 have not been tested
	  at runtime with pbx_lua. Until then, use the lowest available version
	  of Lua, if you enabled the module pbx_lua at all.

	  Change-Id: Ie5270448b11fcb4e2a53d899e4fe7fea793ce7e0

2020-10-22 11:21 +0000 [e326b133dc]  Sean Bright <sean.bright@gmail.com>

	* features.conf.sample: Sample sound files incorrectly quoted

	  ASTERISK-29136 #close

	  Change-Id: I3186536d65a50014c8da4780c9224919caa81440

2020-10-19 13:06 +0000 [69356a7895]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.14.0
2020-10-12 00:45 +0000 [606bd35060]  Andrew Siplas <andrew@asiplas.net>

	* logger.conf.sample: add missing comment mark

	  Add missing comment mark from stock configuration.

	  ASTERISK-29123 #close

	  Change-Id: I4f94eb4544166bca8af4c17fd11edee3c6980620

2020-08-28 16:32 +0000 [e051806e80]  Kevin Harwell <kharwell@digium.com>

	* Logging: Add debug logging categories

	  Added debug logging categories that allow a user to output debug
	  information based on a specified category. This lets the user limit,
	  and filter debug output to data relevant to a particular context,
	  or topic. For instance the following categories are now available for
	  debug logging purposes:

	    dtls, dtls_packet, ice, rtcp, rtcp_packet, rtp, rtp_packet,
	    stun, stun_packet

	  These debug categories can be enable/disable via an Asterisk CLI command.

	  While this overrides, and outputs debug data, core system debugging is
	  not affected by this patch. Statements still output at their appropriate
	  debug level. As well backwards compatibility has been maintained with
	  past debug groups that could be enabled using the CLI (e.g. rtpdebug,
	  stundebug, etc.).

	  ASTERISK-29054 #close

	  Change-Id: I6e6cb247bb1f01dbf34750b2cd98e5b5b41a1849
	  (cherry picked from commit 56028426de0692e8e36167251053c91b96e97c41)

2020-10-05 10:44 +0000 [0b835f2156]  Jean Aunis <jean.aunis@prescom.fr>

	* resource_endpoints.c: memory leak when providing a 404 response

	  When handling a send_message request to a non-existing endpoint, the response's
	  body is overriden and not properly freed.

	  ASTERISK-29108

	  Change-Id: Ie1d3d70065f80793445b60f5e4a7eb31b4b9c5c8

2020-09-30 15:00 +0000 [d0313d8b12]  Sean Bright <sean.bright@gmail.com>

	* tcptls.c: Don't close TCP client file descriptors more than once

	  ASTERISK-28430 #close

	  Change-Id: Ib556b0a0c95cca939e956886214ec8d828d89606

2020-08-04 14:36 +0000 [681a1624b5]  Ben Ford <bford@digium.com>

	* utils.c: NULL terminate ast_base64decode_string.

	  With the addition of STIR/SHAKEN, the function ast_base64decode_string
	  was added for convenience since there is a lot of converting done during
	  the STIR/SHAKEN process. This function returned the decoded string for
	  you, but did not NULL terminate it, causing some issues (specifically
	  with MALLOC_DEBUG). Now, the returned string is NULL terminated, and the
	  documentation has been updated to reflect this.

	  Change-Id: Icdd7d05b323b0c47ff6ed43492937a03641bdcf5

2020-07-20 13:05 +0000 [df7c4ed0ed]  Ben Ford <bford@digium.com>

	* res_stir_shaken: Fix memory allocation error in curl.c

	  Fixed a memory allocation that was not passing in the correct size for
	  the struct in curl.c.

	  Change-Id: I5fb92fbbe84b075fa6aefa2423786df80e114c3a

2020-06-24 11:49 +0000 [21ab0a450b]  Ben Ford <bford@digium.com>

	* res_stir_shaken: Add stir_shaken option and general improvements.

	  Added a new configuration option for PJSIP endpoints - stir_shaken. If
	  set to yes, then STIR/SHAKEN support will be added to inbound and
	  outbound INVITEs. The default is no. Alembic has been updated to include
	  this option.

	  Previously the dialplan function was not trimming the whitespace from
	  the parameters it recieved. Now it does.

	  Also added a conditional that, when TEST_FRAMEWORK is enabled, the
	  timestamp in the identity header will be overlooked. This is just for
	  testing, since the testsuite will rely on a SIPp scenario with a preset
	  identity header to trigger the MISMATCH result.

	  Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1

2020-06-02 09:04 +0000 [d979bdf87a]  Ben Ford <bford@digium.com>

	* res_stir_shaken: Add outbound INVITE support.

	  Integrated STIR/SHAKEN support with outgoing INVITEs. When an INVITE is
	  sent, the caller ID will be checked to see if there is a certificate
	  that corresponds to it. If so, that information will be retrieved and an
	  Identity header will be added to the SIP message. The format is:

	  header.payload.signature;info=<public_key_url>alg=ES256;ppt=shaken

	  Header, payload, and signature are all BASE64 encoded. The public key
	  URL is retrieved from the certificate. Currently the algorithm and ppt
	  are ES256 and shaken, respectively. This message is signed and can be
	  used for verification on the receiving end.

	  Two new configuration options have been added to the certificate object:
	  attestation and origid. The attestation is required and must be A, B, or
	  C. origid is the origination identifier.

	  A new utility function has been added as well that takes a string,
	  allocates space, BASE64 encodes it, then returns it, eliminating the
	  need to calculate the size yourself.

	  Change-Id: I1f84d6a5839cb2ed152ef4255b380cfc2de662b4

2020-05-19 14:46 +0000 [746ce16b16]  Ben Ford <bford@digium.com>

	* res_stir_shaken: Add inbound INVITE support.

	  Integrated STIR/SHAKEN support with incoming INVITES. Upon receiving an
	  INVITE, the Identity header is retrieved, parsing the message to verify
	  the signature. If any of the parsing fails,
	  AST_STIR_SHAKEN_VERIFY_NOT_PRESENT will be added to the channel for this
	  caller ID. If verification itself fails,
	  AST_STIR_SHAKEN_VERIFY_SIGNATURE_FAILED will be added. If anything in
	  the payload does not line up with the SIP signaling,
	  AST_STIR_SHAKEN_VERIFY_MISMATCH will be added. If all of the above steps
	  pass, then AST_STIR_SHAKEN_VERIFY_PASSED will be added, completing the
	  verification process.

	  A new config option has been added to the general section for
	  stir_shaken.conf. "signature_timeout" is the amount of time a signature
	  will be considered valid. If an INVITE is received and the amount of
	  time between when it was received and when it was signed is greater than
	  signature_timeout, verification will fail.

	  Some changes were also made to signing and verification. There was an
	  error where the whole JSON string was being signed rather than the
	  header combined with the payload. This has been changed to sign the
	  correct thing. Verification has been changed to do this as well, and the
	  unit tests have been updated to reflect these changes.

	  A couple of utility functions have also been added. One decodes a BASE64
	  string and returns the decoded string, doing all the length calculations
	  for you. The other retrieves a string value from a header in a rdata
	  object.

	  Change-Id: I855f857be3d1c63b64812ac35d9ce0534085b913

2020-05-13 16:37 +0000 [9d7628829c]  Ben Ford <bford@digium.com>

	*  res_stir_shaken: Add unit tests for signing and verification.

	  Added two unit tests, one for signing and another for verifying.
	  stir_shaken_sign checks to make sure that all the required parameters
	  are passed in and then signs the actual payload. If a signature is
	  produced and a payload returned as a result, the test passes.
	  stir_shaken_verify takes the signature from a signed payload to verify.
	  This unit test also verifies that all the required information is passed
	  in, and then attempts to verify the signature. If verification is
	  successful and a payload is returned, the test passes.

	  Change-Id: I9fa43380f861ccf710cd0f6b6c102a517c86ea13

2020-05-04 16:11 +0000 [035b463c93]  Ben Ford <bford@digium.com>

	* res_stir_shaken: Added dialplan function and API call.

	  Adds the "STIR_SHAKEN" dialplan function and an API call to add a
	  STIR_SHAKEN verification result to a channel. This information will be
	  held in a datastore on the channel that can later be queried through the
	  "STIR_SHAKEN" dialplan funtion to get information on STIR_SHAKEN results
	  including identity, attestation, and verify_result. Here are some
	  examples:

	  STIR_SHAKEN(count)
	  STIR_SHAKEN(0, identity)
	  STIR_SHAKEN(1, attestation)
	  STIR_SHAKEN(2, verify_result)

	  Getting the count can be used to iterate through the results and pull
	  information by specifying the index and the field you want to retrieve.

	  Change-Id: Ice6d52a3a7d6e4607c9c35b28a1f7c25f5284a82

2020-05-01 07:29 +0000 [0392a8e620]  Joshua C. Colp <jcolp@sangoma.com>

	* res_stir_shaken: Use ast_asprintf for creating file path.

	  Change-Id: Ice5d92ecea2f1101c80487484f48ef98be2f1824

2020-04-15 13:15 +0000 [70af7e1311]  Ben Ford <bford@digium.com>

	* res_stir_shaken: Implemented signature verification.

	  There are a lot of moving parts in this patch, but the focus of it is on
	  the verification of the signature using a public key located at the
	  public key URL provided in the JSON payload. First, we check the
	  database to see if we have already downloaded the key. If so, check to
	  see if it has expired. If it has, redownload from the URL. If we don't
	  have an entry in the database, just go ahead and download the public
	  key. The expiration is tested each time we download the file. After
	  that, read the public key from the file and use it to verify the
	  signature. All sanity checking is done when the payload is first
	  received, so the verification is complete once this point is reached.

	  The XML has also been added since a new config option was added to
	  general (curl_timeout). The maximum amount of time to wait for a
	  download can be configured through this option, with a low value by
	  default.

	  Change-Id: I3ba4c63880493bf8c7d17a9cfca1af0e934d1a1c

2020-04-13 11:47 +0000 [971b125fc0]  Alexander Traud <pabstraud@compuserve.com>

	* res_stir_shaken: Do not build without OpenSSL.

	  Change-Id: Idba5151a3079f9dcc0076d635422c5df5845114f

2020-03-26 13:34 +0000 [e9ee9a381b]  Ben Ford <bford@digium.com>

	* res_stir_shaken: Implemented signing of JSON payload.

	  This change provides functions that take in a JSON payload, verify that
	  the contents contain all the mandatory fields and required values (if
	  any), and signs the payload with the private key. Four fields are added
	  to the payload: x5u, attest, iat, and origid. As of now, these are just
	  placeholder values that will be set to actual values once the logic is
	  implemented for what to do when an actual payload is received, but the
	  functions to add these values have all been implemented and are ready to
	  use. Upon successful signing and the addition of those four values, a
	  ast_stir_shaken_payload is returned, containing other useful information
	  such as the algorithm and signature.

	  Change-Id: I74fa41c0640ab2a64a1a80110155bd7062f13393

2020-03-23 15:00 +0000 [716e51a3f3]  Ben Ford <bford@digium.com>

	* res_stir_shaken: Initial commit and reading private key.

	  This commit sets up some of the initial framework for the module and
	  adds a way to read the private key from the specified file, which will
	  then be appended to the certificate object. This works fine for now, but
	  eventually some other structure will likely need to be used to store all
	  this information. Similarly, the caller_id_number is specified on the
	  certificate config object, but in the end we will want that information
	  to be tied to the certificate itself and read it from there.

	  A method has been added that will retrieve the private key associated
	  with the caller_id_number passed in. Tab completion for certificates and
	  stores has also been added.

	  Change-Id: Ic4bc1416fab5d6afe15a8e2d32f7ddd4e023295f

2020-09-29 13:04 +0000 [7a64868118]  Sean Bright <sean.bright@gmail.com>

	* pbx.c: On error, ast_add_extension2_lockopt should always free 'data'

	  In the event that the desired extension already exists,
	  ast_add_extension2_lockopt() will free the 'data' it is passed before
	  returning an error, so we should not be freeing it ourselves.

	  Additionally, there were two places where ast_add_extension2_lockopt()
	  could return an error without also freeing the 'data' pointer, so we
	  add that.

	  ASTERISK-29097 #close

	  Change-Id: I904707aae55169feda050a5ed7c6793b53fe6eae

2020-09-29 19:57 +0000 [9ac933fbba]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail.c: Document VMSayName interruption behavior

	  ASTERISK-26424 #close

	  Change-Id: I797ad0ed302d0b3d2c90543eff5b7207ed08ecf0

2020-09-24 13:46 +0000 [3b0a53f257]  George Joseph <gjoseph@digium.com>

	* app_confbridge/bridge_softmix:  Add ability to force estimated bitrate

	  app_confbridge now has the ability to set the estimated bitrate on an
	  SFU bridge.  To use it, set a bridge profile's remb_behavior to "force"
	  and set remb_estimated_bitrate to a rate in bits per second.  The
	  remb_estimated_bitrate parameter is ignored if remb_behavior is something
	  other than "force".

	  Change-Id: Idce6464ff014a37ea3b82944452e56cc4d75ab0a

2020-09-28 07:42 +0000 [374d18cb97]  lvl <digium@lvlconsultancy.nl>

	* res_musiconhold: Load all realtime entries, not just the first

	  ASTERISK-29099

	  Change-Id: I45636679c0fb5a5f59114c8741626631a604e8a6

2020-09-22 22:39 +0000 [cd793c7c81]  Holger Hans Peter Freyther <holger@moiji-mobile.com>

	* res_pjsip_sdp_rtp: Fix accidentally native bridging calls

	  Stop advertising RFC2833 support on the rtp_engine when DTMF mode is
	  auto but no tel_event was found inside SDP file.

	  On an incoming call create_rtp will be called and when session->dtmf is
	  set to AST_SIP_DTMF_AUTO, the AST_RTP_PROPERTY_DTMF will be set without
	  looking at the SDP file.

	  Once get_codecs gets called we move the DTMF mode from RFC2833 to INBAND
	  but continued to advertise RFC2833 support.

	  This meant the native_rtp bridge would falsely consider the two channels
	  as compatible. In addition to changing the DTMF mode we now set or
	  remove the AST_RTP_PROPERTY_DTMF.

	  The property is checked in ast_rtp_dtmf_compatible and called by
	  native_rtp_bridge_compatible.

	  ASTERISK-29051 #close

	  Change-Id: I1e0c1e324598a437932c0b7836bcb626aba8e287

2020-09-23 04:05 +0000 [efcc6d6f6b]  Jasper van der Neut <jasper@isotopic.nl>

	* channels: Don't dereference NULL pointer

	  Check result of ast_translator_build_path against NULL before dereferencing.

	  ASTERISK-29091

	  Change-Id: Ia3538ea190bd371f70c9dd49984b021765691b29

2020-09-24 09:54 +0000 [14b483dd5e]  Torrey Searle <tsearle@voxbone.com>

	* res_pjsip_diversion: fix double 181

	  Arming response to both AST_SIP_SESSION_BEFORE_REDIRECTING and
	  AST_SIP_SESSION_BEFORE_MEDIA causes 302 to to be handled twice,
	  resulting in to 181 being generated.

	  Change-Id: I866e5461564644ffb8a5e12b6f1330b50a7b63ab

2020-09-24 11:47 +0000 [fccf360fcb]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Clarify that playlist mode only supports HTTP(S) URLs

	  Change-Id: I41e77a04e4a523f4ed61a7a20b738ffd42be441e

2020-09-23 15:20 +0000 [cba132a797]  Sean Bright <sean.bright@gmail.com>

	* dsp.c: Update calls to ast_format_cmp to check result properly

	  ASTERISK-28311 #close

	  Change-Id: Ib1ce8fc1a8752751f5bf3615c59245532dfd9aa2

2020-09-22 05:05 +0000 [baa6e8f112]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_session: Fix stream name memory leak.

	  When constructing a stream name based on the media type
	  and position the allocated name was not being freed
	  causing a leak.

	  Change-Id: I52510863b24a2f531f0a55b440bb2c81844029de

2020-09-18 08:09 +0000 [799426cd58]  Sean Bright <sean.bright@gmail.com>

	* func_curl.c: Prevent crash when using CURLOPT(httpheader)

	  Because we use shared thread-local cURL instances, we need to ensure
	  that the state of the cURL instance is correct before each invocation.

	  In the case of custom headers, we were not resetting cURL's internal
	  HTTP header pointer which could result in a crash if subsequent
	  requests do not configure custom headers.

	  ASTERISK-29085 #close

	  Change-Id: I8b4ab34038156dfba613030a45f10e932d2e992d

2020-09-18 15:02 +0000 [4a7bbac0ed]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Start playlist after initial announcement

	  Only track our sample offset if we are playing a non-announcement file,
	  otherwise we will skip that number of samples when we start playing the
	  first MoH file.

	  ASTERISK-24329 #close

	  Change-Id: Ib6b3c84fcaa1063889ab38ba7e7fc50050a3ccfc

2020-09-22 05:13 +0000 [e6ed74347c]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_session: Fix session reference leak.

	  The ast_sip_dialog_get_session function returns the session
	  with reference count increased. This was not taken into
	  account and was causing sessions to remain around when they
	  should not be.

	  ASTERISK-29089

	  Change-Id: I430fa721b0a824311a59effec6056e9ec528e3e8

2020-09-16 08:01 +0000 [f7285140b4]  Michal Hajek <michal.hajek@daktela.com>

	* res_stasis.c: Add compare function for bridges moh container

	  Sometimes not play MOH on bridge.

	  ASTERISK-29081
	  Reported-by: Michal Hajek <michal.hajek@daktela.com>

	  Change-Id: I760c73e0c9be1d340303b5d1c18a00c4759e8232

2020-09-17 11:40 +0000 [fb6f2157e7]  George Joseph <gjoseph@digium.com>

	* logger.h: Fix ast_trace to respect scope_level

	  ast_trace() was always emitting messages when it's level was set to -1
	  because it was ignoring scope_level.

	  Change-Id: I849c8f4f4613899c37f82be0202024e7d117e506

2020-09-17 13:01 +0000 [8d9633074e]  George Joseph <gjoseph@digium.com>

	* bridge_softmix/sfu_topologies_on_join: Ignore topology change failures

	  When a channel joins a bridge, we do topology change requests on all
	  existing channels to add the new participant to them.  However the
	  announcer channel will return an error because it doesn't support
	  topology in the first place.  Unfortunately, there doesn't seem to be a
	  reliable way to tell if the error is expected or not so the error is
	  ignored for all channels.  If the request fails on a "real" channel,
	  that channel just won't get the new participant's video.

	  Change-Id: Ic95db4683f27d224c1869fe887795d6b9fdea4f0

2020-09-15 16:16 +0000 [9458577f68]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_session.c: Fix build when TEST_FRAMEWORK is not defined

	  Change-Id: Id4852c26e9c412af8e37b5dd3c15da9453ad3276

2020-08-13 03:34 +0000 [5a12463c07]  Torrey Searle <tsearle@voxbone.com>

	* res_pjsip_diversion: implement support for History-Info

	  Implemention of History-Info capable of interworking with Diversion
	  Header following RFC7544

	  ASTERISK-29027 #close

	  Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6

2020-09-14 13:23 +0000 [c9cc281484]  Sean Bright <sean.bright@gmail.com>

	* format_cap: Perform codec lookups by pointer instead of name

	  ASTERISK-28416 #close

	  Change-Id: I069420875ebdbcaada52d92599a5f7de3cb2cdf4

2020-09-11 11:09 +0000 [df429c97a1]  George Joseph <gjoseph@digium.com>

	* res_pjsip_session: Fix issue with COLP and 491

	  The recent 491 changes introduced a check to determine if the active
	  and pending topologies were equal and to suppress the re-invite if they
	  were. When a re-invite is sent for a COLP-only change, the pending
	  topology is NULL so that check doesn't happen and the re-invite is
	  correctly sent. Of course, sending the re-invite sets the pending
	  topology.  If a 491 is received, when we resend the re-invite, the
	  pending topology is set and since we didn't request a change to the
	  topology in the first place, pending and active topologies are equal so
	  the topologies-equal check causes the re-invite to be erroneously
	  suppressed.

	  This change checks if the topologies are equal before we run the media
	  state resolver (which recreates the pending topology) so that when we
	  do the final topologies-equal check we know if this was a topology
	  change request.  If it wasn't a change request, we don't suppress
	  the re-invite even though the topologies are equal.

	  ASTERISK-29014

	  Change-Id: Iffd7dd0500301156a566119ebde528d1a9573314

2020-08-20 15:09 +0000 [6abf6f345d]  George Joseph <gjoseph@digium.com>

	* debugging:  Add enough to choke a mule

	  Added to:
	   * bridges/bridge_softmix.c
	   * channels/chan_pjsip.c
	   * include/asterisk/res_pjsip_session.h
	   * main/channel.c
	   * res/res_pjsip_session.c

	  There NO functional changes in this commit.

	  Change-Id: I06af034d1ff3ea1feb56596fd7bd6d7939dfdcc3

2020-08-20 11:21 +0000 [65088494cb]  George Joseph <gjoseph@digium.com>

	* res_pjsip_session:  Handle multi-stream re-invites better

	  When both Asterisk and a UA send re-invites at the same time, both
	  send 491 "Transaction in progress" responses to each other and back
	  off a specified amount of time before retrying. When Asterisk
	  prepares to send its re-invite, it sets up the session's pending
	  media state with the new topology it wants, then sends the
	  re-invite.  Unfortunately, when it received the re-invite from the
	  UA, it partially processed the media in the re-invite and reset
	  the pending media state before sending the 491 losing the state it
	  set in its own re-invite.

	  Asterisk also was not tracking re-invites received while an existing
	  re-invite was queued resulting in sending stale SDP with missing
	  or duplicated streams, or no re-invite at all because we erroneously
	  determined that a re-invite wasn't needed.

	  There was also an issue in bridge_softmix where we were using a stream
	  from the wrong topology to determine if a stream was added.  This also
	  caused us to erroneously determine that a re-invite wasn't needed.

	  Regardless of how the delayed re-invite was triggered, we need to
	  reconcile the topology that was active at the time the delayed
	  request was queued, the pending topology of the queued request,
	  and the topology currently active on the session.  To do this we
	  need a topology resolver AND we need to make stream named unique
	  so we can accurately tell what a stream has been added or removed
	  and if we can re-use a slot in the topology.

	  Summary of changes:

	   * bridge_softmix:
	     * We no longer reset the stream name to "removed" in
	       remove_all_original_streams().  That was causing  multiple streams
	       to have the same name and wrecked the checks for duplicate streams.

	     * softmix_bridge_stream_sources_update() was checking the old_stream
	       to see if it had the softmix prefix and not considering the stream
	       as "new" if it did.  If the stream in that slot has something in it
	       because another re-invite happened, then that slot in old might
	       have a softmix stream but the same stream in new might actually
	       be a new one.  Now we check the new_stream's name instead of
	       the old_stream's.

	   * stream:
	     * Instead of using plain media type name ("audio", "video", etc) as
	       the default stream name, we now append the stream position to it
	       to make it unique.  We need to do this so we can distinguish multiple
	       streams of the same type from each other.

	     * When we set a stream's state to REMOVED, we no longer reset its
	       name to "removed" or destroy its metadata.  Again, we need to
	       do this so we can distinguish multiple streams of the same
	       type from each other.

	   * res_pjsip_session:
	     * Added resolve_refresh_media_states() that takes in 3 media states
	       and creates an up-to-date pending media state that includes the changes
	       that might have happened while a delayed session refresh was in the
	       delayed queue.

	     * Added is_media_state_valid() that checks the consistency of
	       a media state and returns a true/false value. A valid state has:
	       * The same number of stream entries as media session entries.
	           Some media session entries can be NULL however.
	       * No duplicate streams.
	       * A valid stream for each non-NULL media session.
	       * A stream that matches each media session's stream_num
	         and media type.

	     * Updated handle_incoming_sdp() to set the stream name to include the
	       stream position number in the name to make it unique.

	     * Updated the ast_sip_session_delayed_request structure to include both
	       the pending and active media states and updated the associated delay
	       functions to process them.

	     * Updated sip_session_refresh() to accept both the pending and active
	       media states that were in effect when the request was originally queued
	       and to pass them on should the request need to be delayed again.

	     * Updated sip_session_refresh() to call resolve_refresh_media_states()
	       and substitute its results for the pending state passed in.

	     * Updated sip_session_refresh() with additional debugging.

	     * Updated session_reinvite_on_rx_request() to simply return PJ_FALSE
	       to pjproject if a transaction is in progress.  This stops us from
	       creating a partial pending media state that would be invalid later on.

	     * Updated reschedule_reinvite() to clone both the current pending and
	       active media states and pass them to delay_request() so the resolver
	       can tell what the original intention of the re-invite was.

	     * Added a large unit test for the resolver.

	  ASTERISK-29014

	  Change-Id: Id3440972943c611a15f652c6c569fa0e4536bfcb

2020-08-30 15:42 +0000 [af339d0adb]  Sungtae Kim <pchero21@gmail.com>

	* res_stasis.c: Added video_single option for bridge creation

	  Currently, it was not possible to create bridge with video_mode single.
	  This made hard to put the bridge in a vidoe_single mode.
	  So, added video_single option for Bridge creation using the ARI.
	  This allows create a bridge with video_mode single.

	  ASTERISK-29055

	  Change-Id: I43e720e5c83fc75fafe10fe22808ae7f055da2ae

2020-08-31 07:21 +0000 [a353b76c75]  Sungtae Kim <pchero21@gmail.com>

	* realtime: Increased reg_server character size

	  Currently, the ps_contacts table's reg_server column in realtime database type is varchar(20).
	  This is fine for normal cases, but if the hostname is longer than 20, it returns error and then
	  failed to register the contact address of the peer.

	  Normally, 20 characters limitation for the hostname is fine, but with the cloud env.
	  So, increased the size to 255.

	  ASTERISK-29056

	  Change-Id: Iac52c8c35030303cfa551bb39f410b33bffc507d

2020-08-31 11:14 +0000 [e7620d034a]  Ben Ford <bford@digium.com>

	* Bridging: Use a ref to bridge_channel's channel to prevent crash.

	  There's a race condition with bridging where a bridge can be torn down
	  causing the bridge_channel's ast_channel to become NULL when it's still
	  needed. This particular case happened with attended transfers, but the
	  crash occurred when trying to publish a stasis message. Now, the
	  bridge_channel is locked, a ref to the ast_channel is obtained, and that
	  ref is passed down the chain.

	  Change-Id: Ic48715c0c041615d17d286790ae3e8c61bb28814

2020-09-09 15:01 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.14.0-rc1 Released.

2020-09-09 09:01 +0000 [bd0724c7ed]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.14.0
2020-09-01 08:43 +0000 [ab34417f7e]  Patrick Verzele <patrick@verzele.be>

	* res_pjsip_session: Deferred re-INVITE without SDP send a=sendrecv instead of a=sendonly

	  Building on ASTERISK-25854. When the device requests hold by sending SDP with attribute recvonly, asterisk places the session in sendonly mode. When the device later requests to resume the call by using a re-INVITE excluding SDP, asterisk needs to change the sendonly mode to sendrecv again.

	  Change-Id: I60341ce3d87f95869f3bc6dc358bd3e8286477a6

2020-08-28 16:31 +0000 [7b441505dc]  Kevin Harwell <kharwell@digium.com>

	* conversions: Add string to signed integer conversion functions

	  Change-Id: Id603b0b03b78eb84c7fca030a08b343c0d5973f9

2020-08-26 04:58 +0000 [ae718c975a]  Kfir Itzhak <mastertheknife@gmail.com>

	* app_queue: Fix leave-empty not recording a call as abandoned

	  This fixes a bug introduced mistakenly in ASTERISK-25665:
	  If leave-empty is enabled, a call may sometimes be removed from
	  a queue without recording it as abandoned.
	  This causes Asterisk to not generate an abandon event for that
	  call, and for the queue abandoned counter to be incorrect.

	  ASTERISK-29043 #close

	  Change-Id: I1a71b81df78adff59af587f1d8483cf57df430c7

2020-08-28 09:34 +0000 [a14c5301e7]  George Joseph <gjoseph@digium.com>

	* ast_coredumper: Fix issues with naming

	  If you run ast_coredumper --tarball-coredumps in the same directory
	  as the actual coredump, tar can fail because the link to the
	  actual coredump becomes recursive.  The resulting tarball will
	  have everything _except_ the coredump (which is usually what
	  you need)

	  There's also an issue that the directory name in the tarball
	  is the same as the coredump so if you extract the tarball the
	  directory it creates will overwrite the coredump.

	  So:

	   * Made the link to the coredump use the absolute path to the
	     file instead of a relative one.  This prevents the recursive
	     link and allows tar to add the coredump.

	   * The tarballed directory is now named <coredump>.output instead
	     of just <coredump> so if you expand the tarball it won't
	     overwrite the coredump.

	  Change-Id: I8b3eeb26e09a577c702ff966924bb0a2f9a759ea

2020-08-28 04:29 +0000 [075a7ee4a6]  Joshua C. Colp <jcolp@sangoma.com>

	* parking: Copy parker UUID as well.

	  When fixing issues uncovered by GCC10 a copy of the parker UUID
	  was removed accidentally. This change restores it so that the
	  subscription has the data it needs.

	  ASTERISK-29042

	  Change-Id: I7d396a14ea648bd26d3c363dd78e78bd386b544a

2020-08-26 08:55 +0000 [53a88df076]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: Fix pollmailboxes

	  The name of the voicemail context was overwriting the name of the
	  subscribed mailbox. Fix by simplifying how we create the MWI
	  subscription.

	  ASTERISK-29029 #close

	  Change-Id: Ie8a7db6a0b68f3995b0846bbb733a21909ba44e5

2020-08-26 10:19 +0000 [afc5cf8d67]  Alexander Traud <pabstraud@compuserve.com>

	* samples: Fix keep_alive_interval default in pjsip.conf.

	  Since ASTERISK_27978 the default is not off but 90 seconds. That change
	  happened because ASTERISK_27347 disabled the keep-alives in the bundled
	  PJProject and Asterisk should behave the same as before.

	  Change-Id: Ie63dc558ade6a5a2b969c30a4bd492d63730dc46

2020-08-26 10:43 +0000 [0fa20c8df6]  Alexander Traud <pabstraud@compuserve.com>

	* sip_nat_settings: Update script for latest Linux.

	  With the latest Linux, 'ifconfig' is not installed on default anymore.
	  Furthermore, the output of the current net-tools 'ifconfig' changed.
	  Therefore, parsing failed. This update uses 'ip addr show' instead.
	  Finally, the service for the external IP changed.

	  Change-Id: I9b1a7c3f457e3553b50a3e9a55524e40d70245a0

2020-08-24 16:26 +0000 [17258e0cdf]  Kevin Harwell <kharwell@digium.com>

	* chan_pjsip: disallow PJSIP_SEND_SESSION_REFRESH pre-answer execution

	  This patch makes it so if the PJSIP_SEND_SESSION_REFRESH dialplan function
	  is called on a channel prior to answering a warning is issued and the
	  function returns unsuccessful.

	  ASTERISK-28878 #close

	  Change-Id: I053f767d10cf3b2b898fa9e3e7c35ff07e23c9bb

2020-08-27 05:31 +0000 [0452717645]  Joshua C. Colp <jcolp@sangoma.com>

	* pbx: Fix hints deadlock between reload and ExtensionState.

	  When the ExtensionState AMI action is executed on a pattern matched
	  hint it can end up adding a new hint if one does not already exist.
	  This results in a locking order of contexts -> hints -> contexts.

	  If at the same time a reload is occurring and adding its own hint
	  it will have a locking order of hints -> contexts.

	  This results in a deadlock as one thread wants a lock on contexts
	  that the other has, and the other thread wants a lock on hints
	  that the other has.

	  This change enforces a hints -> contexts locking order by explicitly
	  locking hints in the places where a hint is added when queried for.
	  This matches the order seen through normal adding of hints.

	  ASTERISK-29046

	  Change-Id: I49f027f4aab5d2d50855ae937bcf5e2fd8bfc504

2020-08-14 11:13 +0000 [d28a44c33d]  George Joseph <gjoseph@digium.com>

	* logger.c: Added a new log formatter called "plain"

	  Added a new log formatter called "plain" that always prints
	  file, function and line number if available (even for verbose
	  messages) and never prints color control characters.  It also
	  doesn't apply any special formatting for verbose messages.
	  Most suitable for file output but can be used for other channels
	  as well.

	  You use it in logger.conf like so:
	  debug => [plain]debug
	  console => [plain]error,warning,debug,notice,pjsip_history
	  messages => [plain]warning,error,verbose

	  Change-Id: I4fdfe4089f66ce2f9cb29f3005522090dbb5243d

2020-08-21 16:53 +0000 [444c606161]  Nickolay Shmyrev <nshmyrev@alphacephei.com>

	* res_speech: Bump reference on format object

	  Properly bump reference on format object to avoid memory corruption on double free

	  ASTERISK-29040 #close

	  Change-Id: Ic5a7faabfe2ef965ddb024186e1de7ca4542e2a3

2020-07-22 03:45 +0000 [75756ab850]  Torrey Searle <tsearle@voxbone.com>

	* res_pjsip_diversion: handle 181

	  Adapt the response handler so it also called when 181 is received.
	  In the case 181 is received, also generate the 181 response.

	  ASTERISK-29001 #close

	  Change-Id: I73cfee46a8ca85371280ebdb38674f8fde7510df

2020-08-20 23:51 +0000 [aa93107444]  Evandro César Arruda <ecarruda@gmail.com>

	* app_queue: Member lastpause time reseting

	  This fixes the reseting members lastpause problem when realtime members is being used,
	  the function rt_handle_member_record was forcing the reset members lastpause because it
	  does not exist in realtime

	  ASTERISK-29034 #close

	  Change-Id: Ic9107e4456732a1f78412a32adb2ef87f5da40b5

2020-08-21 09:17 +0000 [788b60d935]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: Process urgent messages with mailcmd

	  Rather than putting messages into INBOX and then moving them to Urgent
	  later, put them directly in to the Urgent folder. This prevents
	  mailcmd from being skipped.

	  ASTERISK-27273 #close

	  Change-Id: I49934e093290d308506ab8d45a40ef705c5ae4f5

2020-08-18 04:36 +0000 [eaed23b340]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_session: Don't aggressively terminate on failed re-INVITE.

	  Per the RFC when an outgoing re-INVITE is done we should
	  only terminate the dialog if a 481 or 408 is received.

	  ASTERISK-29033

	  Change-Id: I6c3ff513aa41005d02de0396ba820083e9b18503

2020-08-19 12:29 +0000 [32b593c325]  Sean Bright <sean.bright@gmail.com>

	* bridge_channel: Ensure text messages are zero terminated

	  T.140 data in RTP is not zero terminated, so when we are queuing a text
	  frame on a bridge we need to ensure that we are passing a zero
	  terminated string.

	  ASTERISK-28974 #close

	  Change-Id: Ic10057387ce30b2094613ea67e3ae8c5c431dda3

2020-08-07 09:31 +0000 [55358b1276]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold.c: Use ast_file_read_dir to scan MoH directory

	  Two changes of note in this patch:

	  * Use ast_file_read_dir instead of opendir/readdir/closedir

	  * If the files list should be sorted, do that at the end rather than as
	    we go which improves performance for large lists

	  Change-Id: Ic7e9c913c0f85754c99c74c9cf6dd3514b1b941f

2020-08-19 07:37 +0000 [b9ba0f8da8]  George Joseph <gjoseph@digium.com>

	* scope_trace: Added debug messages and added additional macros

	  The SCOPE_ENTER and SCOPE_EXIT* macros now print debug messages
	  at the same level as the scope level.  This allows the same
	  messages to be printed to the debug log when AST_DEVMODE
	  isn't enabled.

	  Also added a few variants of the SCOPE_EXIT macros that will
	  also call ast_log instead of ast_debug to make it easier to
	  use scope tracing and still print error messages.

	  Change-Id: I7fe55f7ec28069919a0fc0b11a82235ce904cc21

2020-08-20 08:32 +0000 [377caaed3c]  George Joseph <gjoseph@digium.com>

	* stream.c:  Added 2 more debugging utils and added pos to stream string

	   * Added ast_stream_to_stra and ast_stream_topology_to_stra() macros
	     which are shortcuts for
	        ast_str_tmp(256, ast_stream_to_str(stream, &STR_TMP))

	   * Added the stream position to the string representation of the
	     stream.

	   * Fixed some formatting in ast_stream_to_str().

	  Change-Id: Idaf4cb0affa46d4dce58a73a111f35435331cc4b

2020-08-20 10:07 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.13.0-rc1 Released.

2020-02-18 06:30 +0000 [9c6d14b26b]  Dennis Buteyn <dennis.buteyn@xorcom.com>

	* chan_sip: Clear ToHost property on peer when changing to dynamic host

	  The ToHost parameter was not cleared when a peer's host value was
	  changed to dynamic. This causes invites to be sent to the original host.

	  ASTERISK-29011 #close

	  Change-Id: I9678d512741f71baca8f131a65b7523020b07d5c

2020-08-06 12:51 +0000 [5609d008da]  cmaj <chris@penguinpbx.com>

	* Makefile: Fix certified version numbers

	  Adds sed before awk to produce reasonable ASTERISKVERSIONNUM
	  on certified versions of Asterisk eg. 16.8-cert3 is 160803
	  instead of the previous 00800.

	  ASTERISK-29021 #close

	  Change-Id: Icf241df0ff6db09011b8c936a317a84b0b634e16

2020-08-07 06:58 +0000 [16afb0a05d]  George Joseph <gjoseph@digium.com>

	* scope_trace: Add/update utilities

	  * Added a AST_STREAM_STATE_END sentinel
	  * Add ast_stream_to_str()
	  * Add ast_stream_state_to_str()
	  * Add ast_stream_get_format_count()
	  * Add ast_stream_topology_to_str()
	  * Add ast_stream_topology_get_active_count()
	  * Add ast_format_cap_append_names()
	  * Add ast_sip_session_get_name()

	  Change-Id: I132eb5971ea41509c660f64e9113cda8c9013b0b

2020-08-06 11:41 +0000 [cd8e011670]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold.c: Prevent crash with realtime MoH

	  The MoH class internal file vector is potentially being manipulated by
	  multiple threads at the same time without sufficient locking. Switch to
	  a reference counted list and operate on copies where necessary.

	  ASTERISK-28927 #close

	  Change-Id: I479c5dcf88db670956e8cac177b5826c986b0217

2020-08-04 10:51 +0000 [abad395098]  Sean Bright <sean.bright@gmail.com>

	* vector.h: Fix implementation of AST_VECTOR_COMPACT() for empty vectors

	  The assumed behavior of realloc() - that it was effectively a free() if
	  its second argument was 0 - is Linux specific behavior and is not
	  guaranteed by either POSIX or the C specification.

	  Instead, if we want to resize a vector to 0, do it explicitly.

	  Change-Id: Ife31d4b510ebab41cb5477fdc7ea4e3138ca8b4f

2020-06-30 10:40 +0000 [1e58da7814]  Michael Neuhauser <mike@firmix.at>

	* pjproject: clone sdp to protect against (nat) modifications

	  PJSIP, UDP transport with external_media_address and session timers
	  enabled. Connected to SIP server that is not in local net. Asterisk
	  initiated the connection and is refreshing the session after 150s
	  (timeout 300s). The 2nd refresh-INVITE triggered by the pjsip timer has
	  a malformed IP address in its SDP (garbage string). This only happens
	  when the SDP is modified by the nat-code to replace the local IP address
	  with the configured external_media_address.
	  Analysis: the code to modify the SDP (in
	  res_pjsip_session.c:session_outgoing_nat_hook() and also (redundantly?)
	  in res_pjsip_sdp_rtp.c:change_outgoing_sdp_stream_media_address()) uses
	  the tdata->pool to allocate the replacement string. But the same
	  pjmedia_sdp_stream that was modified for the 1st refresh-INVITE is also
	  used for the 2nd refresh-INVITE (because it is stored in pjmedia's
	  pjmedia_sdp_neg structure). The problem is, that at that moment, the
	  tdata->pool that holds the stringified external_media_address from the
	  1. refresh-INVITE has long been reused for something else.
	  Fix by Sauw Ming of pjproject (see
	  https://github.com/pjsip/pjproject/pull/2476): the local, potentially
	  modified pjmedia_sdp_stream is cloned in
	  pjproject/source/pjsip/src/pjmedia/sip_neg.c:process_answer() and the
	  clone is stored, thereby detaching from the tdata->pool (which is only
	  released *after* process_answer())

	  ASTERISK-28973
	  Reported-by: Michael Neuhauser

	  Change-Id: I272ac22436076596e06aa51b9fa23fd1c7734a0e

2020-07-23 14:47 +0000 [8c54be8fc9]  George Joseph <gjoseph@digium.com>

	* res_pjsip_session: Ensure reused streams have correct bundle group

	  When a bundled stream is removed, its bundle_group is reset to -1.
	  If that stream is later reused, the bundle parameters on session
	  media need to be reset correctly it could mistakenly be rebundled
	  with a stream that was removed and never reused.  Since the removed
	  stream has no rtp instance, a crash will result.

	  Change-Id: Ie2b792220f9291587ab5f9fd123145559dba96d7

2020-07-22 04:41 +0000 [2196511121]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_registrar: Don't specify an expiration for static contacts.

	  Statically configured contacts on an AOR don't have an expiration
	  time so when adding them to the resulting 200 OK if an endpoint
	  registers ensure they are marked as such.

	  ASTERISK-28995

	  Change-Id: I9f0e45eb2ccdedc9a0df5358634a19ccab0ad596

2020-07-13 15:06 +0000 [e9e441c399]  Sean Bright <sean.bright@gmail.com>

	* utf8.c: Add UTF-8 validation and utility functions

	  There are various places in Asterisk - specifically in regards to
	  database integration - where having some kind of UTF-8 validation would
	  be beneficial. This patch adds:

	  * Functions to validate that a given string contains only valid UTF-8
	    sequences.

	  * A function to copy a string (similar to ast_copy_string) stopping when
	    an invalid UTF-8 sequence is encountered.

	  * A UTF-8 validator that allows for progressive validation.

	  All of this is based on the excellent UTF-8 decoder by Björn Höhrmann.
	  More information is available here:

	      https://bjoern.hoehrmann.de/utf-8/decoder/dfa/

	  The API was written in such a way that should allow us to replace the
	  implementation later should we determine that we need something more
	  comprehensive.

	  Change-Id: I3555d787a79e7c780a7800cd26e0b5056368abf9

2020-07-10 18:14 +0000 [15a3318f1f]  sungtae kim <sungtae@messagebird.com>

	* stasis_bridge.c: Fixed wrong video_mode shown

	  Currently, if the bridge has created by the ARI, the video_mode
	  parameter was
	  not shown in the BridgeCreated event correctly.

	  Fixed it and added video_mode shown in the 'bridge show <bridge id>'
	  cli.

	  ASTERISK-28987

	  Change-Id: I8c205126724e34c2bdab9380f523eb62478e4295

2020-07-20 13:17 +0000 [7892bdec53]  Sean Bright <sean.bright@gmail.com>

	* vector.h: Add AST_VECTOR_SORT()

	  Allows a vector to be sorted in-place, rather than only during
	  insertion.

	  Change-Id: I22cba9ddf556a7e44dacc53c4431bd81dd2fa780

2020-07-16 08:41 +0000 [e91e2ec0da]  George Joseph <gjoseph@digium.com>

	* CI: Force publishAsteriskDocs to use python2

	  Change-Id: I7d951e75ad2d472fa096647dfb55670b11105e23

2020-07-22 12:57 +0000 [e8deea38bd]  Joshua C. Colp <jcolp@sangoma.com>

	* websocket / pjsip: Increase maximum packet size.

	  When dealing with a lot of video streams on WebRTC
	  the resulting SDPs can grow to be quite large. This
	  effectively doubles the maximum size to allow more
	  streams to exist.

	  The res_http_websocket module has also been changed
	  to use a buffer on the session for reading in packets
	  to ensure that the stack space usage is not excessive.

	  Change-Id: I31d4351d70c8e2c11564807a7528b984f3fbdd01

2020-07-13 15:42 +0000 [d78ccb800e]  Sean Bright <sean.bright@gmail.com>

	* acl.c: Coerce a NULL pointer into the empty string

	  If an ACL is misconfigured in the realtime database (for instance, the
	  "rule" is blank) and Asterisk attempts to read the ACL, Asterisk will
	  crash.

	  ASTERISK-28978 #close

	  Change-Id: Ic1536c4df856231bfd2da00128f7822224d77610

2020-07-13 04:41 +0000 [9ce6d46aea]  Joshua C. Colp <jcolp@sangoma.com>

	* pjsip: Include timer patch to prevent cancelling timer 0.

	  I noticed this while looking at another issue and brought
	  it up with Teluu. It was possible for an uninitialized timer
	  to be cancelled, resulting in the invalid timer id of 0
	  being placed into the timer heap causing issues.

	  This change is a backport from the pjproject repository
	  preventing this from happening.

	  Change-Id: I1ba318b1f153a6dd7458846396e2867282b428e7

2020-07-02 17:19 +0000 [373e97ea4e]  Nickolay Shmyrev <nshmyrev@alphacephei.com>

	* res_http_websocket: Avoid reading past end of string

	  We read beyond the end of the buffer when copying the string out of the
	  buffer when we used ast_copy_string() because the original string was
	  not null terminated. Instead switch to ast_strndup() which does not
	  exhibit the same behavior.

	  ASTERISK-28975 #close

	  Change-Id: Ib4a75cffeb1eb8cf01136ef30306bd623e531a2a

2020-07-09 15:39 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.12.0-rc1 Released.

2020-07-09 10:29 +0000 [21f2044d38]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.12.0
2020-07-06 10:57 +0000 [fdcb3e2ead]  George Joseph <gjoseph@digium.com>

	* frame.c:  Make debugging easier

	   * ast_frame_subclass2str() and ast_frame_type2str() now return
	     a pointer to the buffer that was passed in instead of void.
	     This makes it easier to use these functions inline in
	     printf-style debugging statements.

	   * Added many missing control frame entries in
	     ast_frame_subclass2str.

	  Change-Id: Ifd0d6578e758cd644c96d17a5383ff2128c572fc

2020-07-05 18:51 +0000 [af595e918e]  George Joseph <gjoseph@digium.com>

	* Scope Trace: Make it easier to trace through synchronous tasks

	  Tracing through synchronous tasks was a little troublesome because
	  the new thread's stack counter reset to 0.  This change allows
	  a synchronous task to set its trace level to be the same as the
	  thread that pushed the task.  For now, the task's level has to be
	  passed in the task's data structure but a future enhancement to the
	  taskprocessor subsystem could automatically set the trace level
	  of the servant to be that of the caller.

	  This doesn't really make sense for async tasks because you never
	  know when they're going to run anyway.

	  Change-Id: Ib8049c0b815063a45d8c7b0cb4e30b7b87b1d825

2020-06-23 18:27 +0000 [e34da79c60]  sungtae kim <pchero21@gmail.com>

	* res_pjsip.c: Added disable_rport option for pjsip.conf

	  Currently when the pjsip making an outgoing request, it keep adding the
	  rport parameter in a request message as a default.

	  This causes unexpected rport handle at the other end.

	  Added option for disable this behaviour in the pjsip.conf.

	  This is a system option, but working as a gloabl option.

	  ASTERISK-28959

	  Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc

2020-06-22 12:16 +0000 [a700134f57]  Nickolay Shmyrev <nshmyrev@alphacephei.com>

	* res_http_websocket.c: Continue reading after ping/pong

	  Do not return error if the client received ping frame
	  while looking for a string and just wait for another frame.

	  ASTERISK-28958 #close

	  Change-Id: I4d06b4827bd71e56cbaafc011ffdcef9f0332922

2020-06-30 11:08 +0000 [c356187969]  Kevin Harwell <kharwell@digium.com>

	* PJSIP_MEDIA_OFFER: override configuration on refresh

	  When using the PSJIP_MEDIA_OFFER dialplan function it was not
	  overriding an endpoint's configured codecs on refresh unless
	  they had a shared codec between the two.

	  This patch makes it so whatever is set using PJSIP_MEDIA_OFFER
	  is used when creating the SDP for a refresh no matter what.

	  ASTERISK-28878 #close

	  Change-Id: I0f7dc86fd0fb607c308e6f98ede303c54d1eacb6

2020-06-10 16:49 +0000 [d9b8f04cd4]  Kevin Harwell <kharwell@digium.com>

	* manager - Add Content-Type parameter to the SendText action

	  This patch allows a user of AMI to now specify the type of message
	  content contained within by setting the 'Content-Type' parameter.

	  Note, the AMI version has been bumped for this change.

	  ASTERISK-28945 #close

	  Change-Id: Ibb5315702532c6b954e1498beddc8855fabdf4bb

2020-06-30 08:56 +0000 [43ba72dea0]  George Joseph <gjoseph@digium.com>

	* Scope Trace:  Add some new tracing macros and an ast_str helper

	  Created new SCOPE_ functions that don't depend on RAII_VAR.  Besides
	  generating less code, the use of the explicit SCOPE_EXIT macros
	  capture the line number where the scope exited.  The RAII_VAR
	  versions can't do that.

	   * SCOPE_ENTER(level, ...): Like SCOPE_TRACE but doesn't use
	     RAII_VAR and therefore needs needs one of...

	   * SCOPE_EXIT(...): Decrements the trace stack counter and optionally
	     prints a message.

	   * SCOPE_EXIT_EXPR(__expr, ...): Decrements the trace stack counter,
	     optionally prints a message, then executes the expression.
	     SCOPE_EXIT_EXPR(break, "My while got broken\n");

	   * SCOPE_EXIT_RTN(, ...): Decrements the trace stack counter,
	     optionally prints a message, then returns without a value.
	     SCOPE_EXIT_RTN("Bye\n");

	   * SCOPE_EXIT_RTN_VALUE(__return_value, ...): Decrements the trace
	     stack counter, optionally prints a message, then returns the value
	     specified.
	     SCOPE_EXIT_RTN_VALUE(rc, "Returning with RC: %d\n", rc);

	  Create an ast_str helper ast_str_tmp() that allocates a temporary
	  ast_str that can be passed to a function that needs it, then frees
	  it.  This makes using the above macros easier.  Example:

	     SCOPE_ENTER(1, Format Caps 1: %s  Format Caps 2: %s\n",
	         ast_str_tmp(32, ast_format_cap_get_names(cap1, &STR_TMP),
	         ast_str_tmp(32, ast_format_cap_get_names(cap2, &STR_TMP));

	  The calls to ast_str_tmp create an ast_str of the specified initial
	  length which can be referenced as STR_TMP.  It then calls the
	  expression, which must return a char *, ast_strdupa's it, frees
	  STR_TMP, then returns the ast_strdupa'd string.  That string is
	  freed when the function returns.

	  Change-Id: I44059b20d55a889aa91440d2f8a590865998be51

2020-06-26 05:18 +0000 [f252eae438]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip: Apply AOR outbound proxy to static contacts.

	  The outbound proxy for an AOR was not being applied to
	  any statically configured Contacts. This resulted in the
	  OPTIONS requests being sent to the wrong target.

	  This change sets the outbound proxy on statically configured
	  contacts once the AOR configuration is done being
	  applied.

	  ASTERISK-28965

	  Change-Id: Ia60f3e93ea63f819c5a46bc8b54be2e588dfa9e0

2020-06-24 05:25 +0000 [b39d3b5d70]  Joshua C. Colp <jcolp@sangoma.com>

	* menuselect: Resolve infinite loop in dependency scenario.

	  Given a scenario where a module has a dependency on both
	  an external library and a module if the external library was
	  available and the module was not an infinite loop would
	  occur. This happened due to the code changing the dependecy
	  status to no failure on each dependency checking loop
	  iteration, resulting in the code thinking that it had
	  gone from no failure to failure each time triggering another
	  dependency check.

	  This change makes it so that the old dependency status is
	  preserved throughout the dependency checking allowing it to
	  determine that after the first iteration the dependency
	  status does not transition from no failure to failure.

	  ASTERISK-28930

	  Change-Id: Iea06d45d9fd6d8bfd068882a0bb7e23a53ec3e84

2020-06-22 15:27 +0000 [2148505f09]  Kevin Harwell <kharwell@digium.com>

	* chan_pjsip: don't use PJSIP_SC_NULL as it only exists pjproject 2.8+

	  A patch made a reference to the PJSIP_SC_NULL enumeration value, which
	  was added to pjproject 2.8 and above thus making it so Asterisk would
	  fail to compile with prior versions of pjproject.

	  This patch removes the reference, and instead initializes the value
	  to '0'.

	  ASTERISK-28886 #close

	  Change-Id: I68491c80da1a0154b2286c9458440141c98db9d7

2020-06-22 04:08 +0000 [5415606846]  Frederic LE FOLL <frederic.lefoll@c-s.fr>

	* chan_sip: chan_sip does not process 400 response to an INVITE.

	  chan_sip handle_response() function, for a 400 response to an INVITE,
	  calls handle_response_invite() and does not generate ACK.
	  handle_response_invite() does not recognize 400 response and has no
	  default response processing for unexpected responses, thus it does not
	  generate ACK either.
	  The ACK on response repetition comes from handle_response() mechanism
	  "We must re-send ACKs to re-transmitted final responses".

	  According to code history, 400 response specific processing was
	  introduced with commit
	  "channels/chan_sip: Add improved support for 4xx error codes"
	  This commit added support for :
	  - 400/414/493 in handle_response_subscribe() handle_response_register()
	    and handle_response().
	  - 414/493 only in handle_response_invite().

	  This fix adds 400 response support in handle_response_invite().

	  ASTERISK-28957

	  Change-Id: Ic71a087e5398dfc7273946b9ec6f9a36960218ad

2020-06-03 05:05 +0000 [a539ce7087]  Università di Bologna - CESIA VoIP <cesia.voip@unibo.it>

	* res_corosync: Fix crash in huge distributed environment.

	  1) Fix memory-leaks
	     Added code to release ast_events extracted from corosync and stasis messages

	  2) Clean stasis cache when a member of the corosync cluster leaves the group
	     Added code to remove from the stasis cache of the members remained on the
	     group all the messages with the EID of the left member.
	     If the device states of the left member remain in the stasis cache of other
	     members, they will not be updated anymore and high priority cached values,
	     like BUSY, will take precedence over current device states.

	  3) Stop corosync event propagation when node is not joined to the group
	     Updated dispatch_thread_handler code to detect when asterisk is not joined
	     to the corosync group and added some condition in publish_event_to_corosync
	     code to send corosync messages only when joined.
	     When a node is not joined its corosync daemon can't send messages:
	     the cpg_mcast_joined function append new messages to the FIFO buffer until
	     it's full and then it blocks indefinitely.
	     In this scenario if the stasis_message_cb callback, registered by
	     res_corosync to handle stasis messages, try to send a corosync messages,
	     the thread of the stasis thread-pool will be blocked until the node join
	     the corosync cluster.

	  ASTERISK-28888
	  Reported by: Università di Bologna - CESIA VoIP

	  Change-Id: Ie8e99bc23f141a73c13ae6fb1948d148d4de17f2

2020-06-13 11:29 +0000 [b986b629e4]  Moises Silva <moises.silva@gmail.com>

	* res_http_websocket: Add payload masking to the websocket client

	  ASTERISK-28949

	  Change-Id: Id465030f2b1997b83d408933fdbabe01827469ca

2020-06-18 05:14 +0000 [10bc2d40e5]  Guido Falsi <madpilot@FreeBSD.org>

	* chan_dadhi: Fix setvar in dahdi channels

	  The change to how setvar works for various channels performed in
	  ASTERISK~23756 missed some required change in the dahdi channel,
	  where the variables are actually set while reading configuration.
	  This change should fix the issue.

	  ASTERISK-28955

	  Change-Id: Ibfeb7f8cbdd735346dc4028de6a265f24f9df274

2020-06-18 03:49 +0000 [397aa391b7]  Joshua C. Colp <jcolp@sangoma.com>

	* app_stream_echo: Fix state of added streams.

	  When stream support was added to Asterisk the stream state
	  was used inconsistently, resulting in odd behavior. This
	  was then standardized to be the state of a stream from the
	  perspective of Asterisk.

	  This change updates the StreamEcho dialplan application
	  to use the correct state, send only, since we are only
	  sending to the endpoint and not expecting them to send us
	  multiple video streams.

	  ASTERISK-28954

	  Change-Id: I35bfd533ef1184ffe62586b22bbd253c82872a56

2020-06-10 04:35 +0000 [419be23003]  Joshua C. Colp <jcolp@sangoma.com>

	* res_sorcery_memory_cache: Disallow per-object expire with full backend.

	  The AMI action and CLI command did not take into account the properties
	  of full backend caching. This resulted in an expired object remaining
	  removed until a full backend update occurred, instead of having the
	  object updated when needed.

	  This change makes it so that the AMI action and CLI command for object
	  expire will now fail instead of putting the cache into an undesired
	  state. If full backend caching is enabled then only operations
	  which act on the entire cache are available.

	  ASTERISK-28942

	  Change-Id: Id662d888f177ab566c8e802ad583083b742d21f4

2020-06-17 03:58 +0000 [63c82caebc]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_session: Preserve label on incoming re-INVITE.

	  When a re-INVITE is received we create a new set of
	  streams that are then swapped in as the active streams.
	  We did not preserve the SDP label from the previous
	  streams, resulting in the label getting lost.

	  This change ensures that if an SDP label is present
	  on the previous stream then it is set on the new stream.

	  ASTERISK-28953

	  Change-Id: I9dd63b88b562fe96ce5c791a3dae5bcaca258445

2020-06-16 08:18 +0000 [83b4507500]  Walter Doekes <walter+asterisk@wjd.nu>

	* app_queue: Read latest wrapuptime instead of (possibly stale) copy

	  Before this changeset, it was possible that a queue member (agent) was
	  called even though they just got out of a call, and wrapuptime seconds
	  hadn't passed yet.

	  This could happen if a member ended a call _between_ a new call attempt
	  and asterisk trying that particular member for a new call.

	  In that case, Asterisk would check the hangup time of the
	  call-before-the-last-call instead of the hangup time of the-last-call.

	  ASTERISK-28952

	  Change-Id: Ie0cab8f0e8d639c01cba633d4968ba19873d80b3

2020-06-15 07:09 +0000 [32399abb82]  Walter Doekes <walter+asterisk@wjd.nu>

	* res_pjsip: Include <pjsip_ua.h> instead of internal "pjsua-lib/pjsua.h"

	  Change-Id: I24b5453df412232cf7f9a171ea4a34b35ad3ae78

2020-06-15 06:53 +0000 [e8cb8957ec]  Walter Doekes <walter+asterisk@wjd.nu>

	* app_queue: Remove stale code in try_calling

	  Because ring_entry() is not called, outgoing->chan is not touched here
	  either.

	  ASTERISK-28950
	  ASTERISK-28644

	  Change-Id: I564613715dfaf45af868251eb75a451f512af90f

2020-05-15 16:08 +0000 [82ce3b7620]  Kevin Harwell <kharwell@digium.com>

	* pjproject: Upgrade bundled version to pjproject 2.10

	  This patch makes the usual necessary changes when upgrading to a new
	  version pjproject. For instance, version number bump, patches removed
	  from third-party, new *.md5 file added, etc..

	  This patch also includes a change to the Asterisk pjproject Makefile to
	  explicitly create the 'source/pjsip-apps/lib' directory. This directory
	  is no longer there by default so needs to be added so the Asterisk
	  malloc debug can be built.

	  This patch also includes some minor changes to Asterisk that were a result
	  of the upgrade. Specifically, there was a backward incompatibility change
	  made in 2.10 that modified the "expires header" variable field from a
	  signed to an unsigned value. This potentially effects comparison. Namely,
	  those check for a value less than zero. This patch modified a few locations
	  in the Asterisk code that may have been affected.

	  Lastly, this patch adds a new macro PJSIP_MINVERSION that can be used to
	  check a minimum version of pjproject at compile time.

	  ASTERISK-28899 #close

	  Change-Id: Iec8821c6cbbc08c369d0e3cd2f14e691b41d0c81

2020-06-12 05:16 +0000 [0b133a32ec]  sungtae kim <sungtae@messagebird.com>

	* res_ari: Fix create channel request channelId parameter parsing

	  If channelId parameters were passed in the body, the Asterisk doesn't parsing it correctly.

	  Fixed it to parse the channelId, other_channel_id parameter correclty.

	  ASTERISK-28948

	  Change-Id: I59b49161a94869169ee19c1ffab5afcef7026157

2020-06-03 11:47 +0000 [563f2f94d6]  Joshua C. Colp <jcolp@sangoma.com>

	* core_unreal / core_local: Add multistream and re-negotiation.

	  When requesting a Local channel the requested stream topology
	  or a converted stream topology will now be placed onto the
	  resulting channels.

	  Frames written in on streams will now also preserve the stream
	  identifier as they are queued on the opposite channel.

	  Finally when a stream topology change is requested it is
	  immediately accepted and reflected on both channels. Each
	  channel also receives a queued frame to indicate that the
	  topology has changed.

	  ASTERISK-28938

	  Change-Id: I4e9d94da5230d4bd046dc755651493fce1d87186

2020-06-08 06:27 +0000 [49b204ed8a]  Joshua C. Colp <jcolp@sangoma.com>

	* res_rtp_asterisk: Don't assume setting retrans props means to enable.

	  The "value" passed in when setting an RTP property determines
	  whether it should be enabled or disabled. The RTP send and
	  receive retrans props did not examine this to know if the
	  buffers should be enabled. They assumed they always should be.

	  This change makes it so that the "value" passed in is
	  respected.

	  ASTERISK-28939

	  Change-Id: I9244cdbdc5fd065c7f6b02cbfa572bc55c7123dc

2020-06-10 12:11 +0000 [ef608dec78]  Joshua C. Colp <jcolp@sangoma.com>

	* bridge_softmix: Add additional old states for adding new source.

	  There are three states that an old stream can be in to allow
	  becoming a source stream in a new stream:

	  1. Removed
	  2. Inactive
	  3. Sendonly

	  This change adds the two missing ones, inactive and sendonly,
	  so if a stream transitions from those to a state where they are
	  providing video to Asterisk we properly re-negotiate the other
	  participants.

	  ASTERISK-28944

	  Change-Id: Id8256b9b254b403411586284bbaedbf50452de01

2020-06-03 11:23 +0000 [efeff59152]  George Joseph <gjoseph@digium.com>

	* res_fax: Don't start a gateway if either channel is hung up

	  When fax_gateway_framehook is called and a gateway hasn't already
	  been started, the framehook gets the t38 state for both the current
	  channel and the peer.  That call trickles down to the channel
	  driver which determines the state.  If either channel is hung up
	  (or in the process of being hung up), the channel driver's tech_pvt
	  is going to be NULL which, in the case of chan_pjsip, will cause a
	  segfault.

	  * Added a hangup check for both the channel and peer channel
	    before starting a fax gateway.

	  * Added a check for NULL tech_pvt to chan_pjsip_queryoption
	    so we don't attempt to reference a tech_pvt that's already
	    gone.

	  ASTERISK-28923
	  Reported by: Yury Kirsanov

	  Change-Id: I4e10e63b667bbb68c1c8623f977488f5d807897c

2020-06-03 09:51 +0000 [f59001d171]  Kevin Harwell <kharwell@digium.com>

	* Compiler fixes for gcc 10

	  This patch fixes a few compile warnings/errors that now occur when using gcc
	  10+.

	  Also, the Makefile.rules check to turn off partial inlining in gcc versions
	  greater or equal to 8.2.1 had a bug where it only it only checked against
	  versions with at least 3 numbers (ex: 8.2.1 vs 10). This patch now ensures
	  any version above the specified version is correctly compared.

	  Change-Id: I54718496eb0c3ce5bd6d427cd279a29e8d2825f9

2020-06-07 19:02 +0000 [c7406a5b48]  George Joseph <gjoseph@digium.com>

	* app_confbridge: Plug ref leak of bridge channel with send_events

	  When send_events is enabled for a user, we were leaking a reference
	  to the bridge channel in confbridge_manager.c:send_message().  This
	  also caused the bridge snapshot to not be destroyed.

	  Change-Id: I87a7ae9175e3cd29f6d6a8750e0ec5427bd98e97

2020-06-08 14:34 +0000 [68b2a2f1ab]  Ben Ford <bford@digium.com>

	* cli.c: Fix compiler error.

	  Added default variable value to fix a compiler error.

	  Change-Id: I7b592adbb1274dc5464dea1c5e5de0685c928553

2020-06-09 06:57 +0000 [a8cef78f09]  sungtae kim <sungtae@messagebird.com>

	* res_ari: Fix create request body parameter parsing.

	  If parameters were passed in the body as JSON to the
	  create route they were not being parsed before checking
	  to ensure that required fields were set.

	  This change moves the parsing so it occurs before
	  checking.

	  ASTERISK-28940

	  Change-Id: I898b4c3c7ae1cde19a6840e59f498822701cf5cf

2020-06-05 04:45 +0000 [51f1f78069]  Joshua C. Colp <jcolp@sangoma.com>

	* bridge_channel: Don't queue unmapped frames.

	  If a frame is written to a channel in a bridge we
	  would normally queue this frame up and the channel
	  thread would then act upon it. If this frame had no
	  stream mapping on the channel it would then be
	  discarded.

	  This change adds a check before the queueing occurs
	  to determine if a mapping exists. If it does not
	  exist then the frame is not even queued at all. This
	  stops a frame duplication from happening and from
	  the channel thread having to wake up and deal with
	  it.

	  Change-Id: I17189b9b1dec45fc7e4490e8081d444a25a00bda

2020-06-05 04:30 +0000 [b82fd4f236]  Walter Doekes <walter+asterisk@wjd.nu>

	* pjsip: Prevent invalid memory access when attempting to contact a non-sip URI

	  You cannot cast a pjsip_uri to a pjsip_sip_uri using pjsip_uri_get_uri,
	  without checking that it's a PJSIP_URI_SCHEME_IS_SIP(S).

	  ASTERISK-28936

	  Change-Id: I9f572b3677e4730458e9402719e580f8681afe2a

2020-05-27 03:47 +0000 [73b5e09738]  Joshua C. Colp <jcolp@sangoma.com>

	* res_fax: Don't consume frames given to fax gateway on write.

	  In a particular fax gateway scenario whereby it would
	  have to translate using the read translation path on a
	  channel the frame being translated would be consumed.
	  When the frame is in the write path it is not permitted
	  to free the frame as the caller expects it to continue
	  to exist.

	  This change makes it so that the frame is only consumed
	  on the read path where it is acceptable to free it.

	  ASTERISK-28900

	  Change-Id: I011c321288a1b056d92b37c85e229f4a28ee737d

2020-06-02 06:24 +0000 [a829658762]  Alexander Traud <pabstraud@compuserve.com>

	* pjproject_bundled: Honor --without-pjproject.

	  The previous change missed that 'make' uses 'PJPROJECT_BUNDLED' anyway.

	  ASTERISK-28929

	  Change-Id: I7ef0e78a06ea391b59d95b99d46bbed3fec4fed9

2020-06-04 01:50 +0000 [905b05079b]  Pirmin Walthert <infos@nappsoft.ch>

	* res_pjsip_logger: use the correct pointer when logging tx_messages to pcap

	  When writing tx messages to pcap files, Asterisk is using the wrong
	  pointer resulting in lots of wasted space. This patch fixes it to use
	  the correct pointer.

	  ASTERISK-28932 #close

	  Change-Id: I5b8253dd59a083a2ca2c81f232f1d14d33c6fd23

2020-05-14 13:24 +0000 [6a0c472374]  George Joseph <gjoseph@digium.com>

	* Scope Tracing:  A new facility for tracing scope enter/exit

	  What's wrong with ast_debug?

	    ast_debug is fine for general purpose debug output but it's not
	    really geared for scope tracing since it doesn't present its
	    output in a way that makes capturing and analyzing flow through
	    Asterisk easy.

	  How is scope tracing better?

	    Scope tracing uses the same "cleanup" attribute that RAII_VAR
	    uses to print messages to a separate "trace" log level.  Even
	    better, the messages are indented and unindented based on a
	    thread-local call depth counter.  When output to a separate log
	    file, the output is uncluttered and easy to follow.

	    Here's an example of the output. The leading timestamps and
	    thread ids are removed and the output cut off at 68 columns for
	    commit message restrictions but you get the idea.

	  --> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
	  	--> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
	  		--> res_pjsip_session.c:3669 handle_incoming_response PJSIP/
	  			--> chan_pjsip.c:3265 chan_pjsip_incoming_response_after
	  				--> chan_pjsip.c:3194 chan_pjsip_incoming_response P
	  					    chan_pjsip.c:3245 chan_pjsip_incoming_respon
	  				<-- chan_pjsip.c:3194 chan_pjsip_incoming_response P
	  			<-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after
	  		<-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/
	  	<-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
	  <-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001

	    The messages with the "-->" or "<--" were produced by including
	    the following at the top of each function:

	    SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session));

	    Scope isn't limited to functions any more than RAII_VAR is.  You
	    can also see entry and exit from "if", "for", "while", etc blocks.

	    There is also an ast_trace() macro that doesn't track entry or
	    exit but simply outputs a message to the trace log using the
	    current indent level.  The deepest message in the sample
	    (chan_pjsip.c:3245) was used to indicate which "case" in a
	    "select" was executed.

	  How do you use it?

	    More documentation is available in logger.h but here's an overview:

	    * Configure with --enable-dev-mode.  Like debug, scope tracing
	      is #ifdef'd out if devmode isn't enabled.

	    * Add a SCOPE_TRACE() call to the top of your function.

	    * Set a logger channel in logger.conf to output the "trace" level.

	    * Use the CLI (or cli.conf) to set a trace level similar to setting
	      debug level... CLI> core set trace 2 res_pjsip.so

	  Summary Of Changes:

	    * Added LOG_TRACE logger level.  Actually it occupies the slot
	      formerly occupied by the now defunct "event" level.

	    * Added core asterisk option "trace" similar to debug.  Includes
	  	ability to specify global trace level in asterisk.conf and CLI
	  	commands to turn on/off and set levels.  Levels can be set
	  	globally (probably not a good idea), or by module/source file.

	    * Updated sample asterisk.conf and logger.conf.  Tracing is
	      disabled by default in both.

	    * Added __ast_trace() to logger.c which keeps track of the indent
	      level using TLS. It's #ifdef'd out if devmode isn't enabled.

	    * Added ast_trace() and SCOPE_TRACE() macros to logger.h.
	      These are all #ifdef'd out if devmode isn't enabled.

	  Why not use gcc's -finstrument-functions capability?

	    gcc's facility doesn't allow access to local data and doesn't
	    operate on non-function scopes.

	  Known Issues:

	    The only know issue is that we currently don't know the line
	    number where the scope exited.  It's reported as the same place
	    the scope was entered.  There's probably a way to get around it
	    but it might involve looking at the stack and doing an 'addr2line'
	    to get the line number.  Kind of like ast_backtrace() does.
	    Not sure if it's worth it.

	  Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027

2020-05-29 04:28 +0000 [f444f2495b]  Pirmin Walthert <infos@nappsoft.ch>

	* res_pjsip_logger.c: correct the return value checks when writing to pcap
	  files

	  fwrite() does return the number of elements written and not the
	  number of bytes. However asterisk is currently comparing the return
	  value to the size of the written element what means that asterisk logs
	  five WARNING messages on every packet written to the pcap file.

	  This patch changes the code to check for the correct value, which will
	  always be 1.

	  ASTERISK-28921 #close

	  Change-Id: I2455032d9cb4c5a500692923f9e2a22e68b08fc2

2020-05-28 12:15 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.11.0-rc1 Released.

2020-05-28 07:06 +0000 [2d14425e04]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.11.0
2020-05-28 06:55 +0000 [c0df04017f]  Joshua C. Colp <jcolp@sangoma.com>

	* ARI: Bump non-breaking version number to 4.1.3

	  The channel create call now allows setting variables.

	  Change-Id: I5e5bd34e0eb3df6e7feb2095e00a91c742ad5113

2020-05-27 09:35 +0000 [b37d7b5d0a]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip: Use correct pool for storing the contact_user value.

	  When replacing the user portion of the Contact URI the code
	  was using the ephemeral pool instead of the tdata pool. This
	  could cause the Contact user value to become invalid after a
	  period of time.

	  The code will now use the tdata pool which persists for the
	  lifetime of the message instead.

	  ASTERISK-28794

	  Change-Id: I31e7b958e397cbdaeedd0ebb70bcf8dd2ed3c4d5

2020-05-13 07:06 +0000 [81929d478c]  Pirmin Walthert <infos@nappsoft.ch>

	* res_pjsip_nat.c: remove x-ast-orig-host from request URI and To header

	  While asterisk is filtering out the x-ast-orig-host parameter from the
	  contact on response messages, it is not filtering it out from the
	  request URI and the to header on SIP requests (for example INVITE).

	  ASTERISK-28884 #close

	  Change-Id: Id032b33098a1befea9b243ca994184baecccc59e

2020-05-18 09:05 +0000 [420d38555e]  Joshua C. Colp <jcolp@sangoma.com>

	* bridge: Don't try to match audio formats.

	  When bridging channels we were trying to match the audio
	  formats of both sides in combination with the configured
	  formats. While this is allowed in SDP in practice this
	  causes extra reinvites and problems. This change ensures
	  that audio streams use the formats of the first existing
	  active audio stream. It is only when other stream types
	  (like video) exist that this will result in re-negotiation
	  occurring for those streams only.

	  ASTERISK-28871

	  Change-Id: I22f5a3e7db29e00c165e74d05d10856f6086fe47

2020-05-19 07:55 +0000 [dcad322562]  Joshua C. Colp <jcolp@sangoma.com>

	* res_sorcery_config: Always reload configuration on errors.

	  When a configuration file in Asterisk is loaded
	  information about it is stored such that on a
	  reload it is not reloaded if nothing has changed.
	  This can be problematic when an error exists in
	  a configuration file in PJSIP since the error
	  will be output at start and not subsequently on
	  reload if the file is unchanged.

	  This change makes it so that if an error is
	  encountered when res_sorcery_config is loading
	  a configuration file a reload will always read
	  in the configuration file, allowing the error
	  to be seen easier.

	  Change-Id: If2e05a017570f1f5f4f49120da09601e9ecdf9ed

2020-05-18 10:10 +0000 [c00b032bbf]  Alexander Traud <pabstraud@compuserve.com>

	* res_srtp: Set all possible flags while selecting the Crypto Suite.

	  The flags of a previous selection could have been set within the
	  object 'srtp', for example, when the previous selection returned
	  failure after setting just 'some' flags. Now, not to clutter the
	  code, all possible flags are cleared first, and then the selected
	  flags are set as before.

	  ASTERISK-28903

	  Change-Id: I1b9d7aade7d5120244ce7e3a8865518cbd6e0eee

2020-04-30 17:57 +0000 [229cb16d52]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_logger: Expand functionality to improve logging.

	  The PJSIP packet logger now has the following CLI commands:

	  pjsip set logger pcap <filename>

	  When used this will create a pcap file containing the incoming
	  and outgoing SIP packets, in unencrypted form.

	  pjsip set logger verbose <on / off>

	  This allows you to toggle logging to verbose on and off.

	  pjsip set logger host <IP/subnet mask> add

	  This allows you to add an additional IP address or subnet
	  mask to logging, allowing you to log multiple instead of
	  just a single IP address or all traffic.

	  The normal "pjsip set logger host" CLI command has also been
	  expanded to allow subnet masks as well.

	  ASTERISK-28895

	  Change-Id: If5859161a72b0d7dd2d1f92d45bed88e0cd07d0e

2020-05-19 04:18 +0000 [48a3182c42]  Joshua C. Colp <jcolp@sangoma.com>

	* bridge_softmix: Always remove audio from mixed frame.

	  When receiving audio from a channel we determine if it
	  is talking or silence based on a threshold value. If
	  this threshold is met we always mix the audio into the
	  conference bridge. If this threshold is not met we also
	  mix the audio into the conference bridge UNLESS the
	  drop silence option is enabled.

	  The code that removed the audio from the mixed frame
	  assumed that it was always not present if it did not
	  meet the threshold to be considered talking. This is
	  incorrect. If it has been stated that the audio was
	  mixed into the mixed frame then it has been mixed into
	  the mixed frame. By not removing audio that was
	  considered non-talking it was possible for a channel
	  to receive a slight echo of audio of itself at times.

	  This change ensures that the audio is always removed
	  from the mixed frame going back to the channel so it
	  no longer receives the slight echo.

	  ASTERISK-28898

	  Change-Id: I7b1b582cc1bcdb318ecc60c9d2e3d87ae31d55cb

2020-05-13 13:32 +0000 [7949343efb]  Nicholas John Koch <koch@njk-it.de>

	* res_musiconhold: Added check for dot character in path of playlist entries to avoid warnings

	  A warning was triggered that there may be a problem regarding file
	  extension (which is correct and should not be set anyway). The warning
	  also appeared if there was dot within the path itself.

	  E.g.
	  [sales-queue-hold]
	  mode=playlist
	  entry=/var/www/domain.tld/moh/funky_music

	  The music played correctly but you get a warning message.

	  Now there will be a check if the position of a potential dot character
	  is after the last position of a slash character. This dot charachter
	  will be treated as a extension naming. Dots within the path then ignored.

	  ASTERISK-28892
	  Reported-By: Nicholas John Koch

	  Change-Id: I2ec35a613413affbf5fcc01c8c181eba24865b9e

2020-05-18 11:31 +0000 [862b9fcce8]  sungtae kim <sungtae@messagebird.com>

	* res_rtp_asterisk.c: Fixed memory leak

	  Added freeifaddrs() for memory releasing.

	  ASTERISK-28904

	  Change-Id: I109403866e85a30659351946903a679de9727a8f

2020-05-12 18:15 +0000 [ed75fd14a3]  Joshua C. Colp <jcolp@sangoma.com>

	* ari: Allow variables to be set on channel create.

	  This change adds the same variable functionality that
	  is available for originating a channel to the create
	  call. Now when creating a channel you can specify
	  dialplan variables to set instead of having to do another
	  API call.

	  ASTERISK-28896

	  Change-Id: If13997ba818136d7c070585504fc4164378aa992

2020-05-10 05:01 +0000 [110d563452]  Peter Sokolov (License #7070)

	* pjsip_resolver.c: Ensure AAAA dns requests are made.

	  1. Modify sip_resolve and sip_resolve_callback to request AAAA lookups
	     when an IPV6 transport type has been requested.

	  2. Rename all occurrences of pjsip_transport_get_type_name to
	     pjsip_transport_get_type_desc. This ensures that the log/debug info
	     shows whether the transport is IPv6 or IPv4.

	  3. Do not add the constant PJSIP_TRANSPORT_IPV6 to existing transport
	     types. This results in invalid values. Use a bitwise or instead.

	  ASTERISK-26780
	  Patches:
	      pjsip_resolver.c uploaded by Peter Sokolov (License #7070)

	  Change-Id: I8b1e298f8efa682d0a7644113258fe76d9889c58

2020-05-08 06:11 +0000 [42301b266f]  Guido Falsi <madpilot@FreeBSD.org>

	* pjproject: Fix race condition when building with parallel make

	  Pjproject makefiles miss some dependencies which can cause race
	  conditions when building with parallel make processes. This patch
	  adds such dependencies correctly.

	  ASTERISK-28879 #close
	  Reported-by: Dmitry Wagin <dmitry.wagin@ya.ru>

	  Change-Id: Ie1b0dc365dafe4a84c5248097fe8d73804043c22

2020-05-09 02:46 +0000 [1249f911f3]  Roger James <roger@beardandsandals.co.uk>

	* res_pjsip_history.c: Fix to stop SIGSEGV when IPv6 addresses are encountered.

	  Changed source and destination address fields in struct
	  pjsip_history_entry so that they are long enough to hold an IPv6
	  address.

	  ASTERISK-28854

	  Change-Id: Id65bb9aa961e9ecbcb500815e18170f774e34d3e

2020-04-04 04:28 +0000 [a5100e7171]  Alexander Traud <pabstraud@compuserve.com>

	* app_osplookup: Avoid a format truncation.

	  Ensure that output buffers for the osp_convert_inout
	  function have sufficient space for additional data
	  such as brackets and ports.

	  ASTERISK-28804

	  Change-Id: Ie54c8241ff0cc653910539c2db00ff2a4869750b

2020-04-01 08:38 +0000 [023d73a0e7]  Alexander Traud <pabstraud@compuserve.com>

	* tcptls: Fix notice when TLS is enabled but not supported.

	  ASTERISK-28797

	  Change-Id: Iab364a2c2519fd9d11d1c28293fda43d61b64c28

2020-04-14 11:02 +0000 [6649b13b91]  Pirmin Walthert <infos@nappsoft.ch>

	* app.c: make sure that no non-async-signal-safe syscalls are used after
	  fork before exec

	  Posix does only allow async-signal-safe syscalls after fork before exec.
	  As asterisk ignores this, functions like TrySystem or System sometimes
	  end up in a deadlocked child process. The patch prevents the use of
	  non-async-signal-safe syscalls.

	  ASTERISK-28776

	  Change-Id: Idc76365c0592ee3f3b3bd72a4f48f7a098978e8e

2020-05-04 11:31 +0000 [f56149d019]  George Joseph <gjoseph@digium.com>

	* streams: Fix one memory leak and one formats ref issue

	  ast_stream_topology_create_from_format_cap() was setting the
	  stream->formats directly but not freeing the default formats.  This
	  causes a memory leak.

	  * ast_stream_topology_create_from_format_cap() now calls
	    ast_stream_set_formats() which properly cleans up the existing
	    stream formats.

	  When cloning a stream, the source stream's format caps _pointer_ is
	  copied to the new stream and it's reference count bumped.  If
	  either stream is set to "removed", this will cause _both_ streams
	  to have their format caps cleared.

	  * ast_stream_clone() now creates a new format caps object and copies
	    the formats from the source stream instead of just copying the
	    pointer.

	  ASTERISK-28870

	  Change-Id: If697d81c3658eb7baeea6dab413b13423938fb53

2020-04-08 18:41 +0000 [92169e6f8a]  Nathan Bruning <nathan@iperity.com>

	* app_queue: track masquerades in app_queue to avoid leaked stasis subscriptions

	  Add a new "masquarade" channel event, and use it in app_queue to track unique id's.

	  Testcase is submitted as https://gerrit.asterisk.org/c/testsuite/+/14210

	  ASTERISK-28829 #close
	  ASTERISK-25844 #close

	  Change-Id: Ifc5f9f9fd70903f3c6e49738d3bc632b085d2df6

2020-05-03 05:30 +0000 [17a8d86e1e]  Guido Falsi <madpilot@FreeBSD.org>

	* pjproject: Remove bashism from configure.m4 script

	  The configure.m4 script for pjproject contains some += syntax, which
	  is specific to bash, replacing it with string substitutions makes
	  the script compatible with traditional Bourne shells.

	  ASTERISK-28866 #close
	  Reported-by: Christoph Moench-Tegeder <cmt@FreeBSD.org>

	  Change-Id: I382a78160e028044598b7da83ec7e1ff42b91c05

2020-05-04 03:29 +0000 [9e7fc21086]  Jaco Kroon <jaco@uls.co.za>

	* Remove #include <sys/cdefs.h>

	  These are not provided by standards, and as a result causes failure to
	  compile on musl.

	  https://wiki.musl-libc.org/faq.html#Q:-When-compiling-something-against-musl,-I-get-error-messages-about-%3Ccode%3Esys/cdefs.h%3C/code%3E

	  Change-Id: I6a357cefd106c72cfecafd898638f6b5692c2e05

2020-04-30 10:56 +0000 [cf5e30dd0e]  George Joseph <gjoseph@digium.com>

	* app_voicemail: Add workaround for a gcc 10 issue with -Wrestrict

	  The gcc 10 -Wrestrict option was causing "overlap" errors when
	  snprintf was copying one char[256] structure member to another
	  char[256] member in the same structure.

	  Using ast_alloca instead of declaring the structure inline
	  solves the issue.

	  Here's a link to the "enhancement":
	  https://gcc.gnu.org/legacy-ml/gcc-patches/2019-10/msg00570.html

	  We may follow up with a gcc bug report.

	  Change-Id: Ie0099adcb0a9727bd9aa99e024dd912a67eaf534

2020-04-27 10:28 +0000 [0ce4a77367]  Alexander Traud <pabstraud@compuserve.com>

	* core_local: Local calls are always secure.

	  In a Dialplan, the channel drivers 'chan_sip' and 'chan_iax2' support
	  the channel items 'secure_bridge_media' and 'secure_bridge_signaling'.
	  That way, a channel can be forced to use encryption even if not
	  specified in its configuration.

	  However, when the Local Proxy kicks in, for example, in case of a
	  forwarding (SIP status 302), Local Proxy stated it does not know those
	  items. Consequently, such a call could not be proxied how clever your
	  Dialplan was. Because local calls within Asterisk are always secure,
	  Local Proxy accepts such a request now.

	  ASTERISK-22920

	  Change-Id: I4c143bb70f686790953cc04c5a4b810bbb03636c

2020-04-28 10:31 +0000 [4374f86219]  Joshua C. Colp <jcolp@sangoma.com>

	* pjsip: Increase maximum ICE candidate count.

	  In practice it has been seen that some users come
	  close to our maximum ICE candidate count of 32.
	  In case people have gone over this increases the
	  count to 64, giving ample room.

	  ASTERISK-28859

	  Change-Id: I35cd68948ec0ada86c14eb53092cdaf8b62996cf

2020-04-26 05:56 +0000 [858d3216dd]  Guido Falsi <madpilot@FreeBSD.org>

	* res_rtp_asterisk: Protect access to nochecksums with #ifdef

	  Recently code accessing nochecksums variable has been added without including #ifdef SO_NO_CHECK protection, while the variable is created only when such constant is defined.

	  ASTERISK-28852 #close

	  Change-Id: I381718893b80599ab8635f2b594a10c1000d595e

2020-04-26 06:08 +0000 [ca5c1e6336]  Guido Falsi <madpilot@FreeBSD.org>

	* core/dns: Add system include required on FreeBSD

	  While testing the latest RC on FreeBSD I noticed this new file fails to build. On FreeBSD inlcuding resolv.h requires sockaddr_in to be defined, and it's defined in netinet/in.h. So I added this include.

	  ASTERISK-28853 #close

	  Change-Id: I6997daf3956e6eb70ab6cb358628d162fad80079

2020-04-17 02:39 +0000 [3bde9dcc80]  Peter Turczak <peter@turczak.de>

	* chan_mobile: Add smoother to make SIP/RTP endpoints happy.

	  In contrast to RFC 3551, section 4.2, several SIP/RTP clients misbehave
	  severly (up to crashing). This patch adds another smoother for the audio
	  received via bt. Therefore the audio frames sent to the core will be
	  CHANNEL_FRAME_SIZE.

	  ASTERISK-28832 #close

	  Change-Id: Ic5f9e2f35868ae59cc9356afbd1388b779a1267f

2020-04-22 12:38 +0000 [302c20546a]  Alexander Traud <pabstraud@compuserve.com>

	* app_fax: SpanDSP headers do not use ast_malloc; ignore that.

	  Since Asterisk 14, app_fax did not compile at all because Asterisk
	  requires that not malloc but ast_malloc is used everywhere. However,
	  the system headers of SpanDSP use malloc. Because we cannot (and do
	  not need to) change system headers, let us ignore this.

	  ASTERISK-28848

	  Change-Id: I31f7a6b92a07032c5cef1c16b8901b107fe35546

2020-04-23 16:20 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.10.0-rc1 Released.

2020-04-23 11:03 +0000 [bbd0835482]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.10.0
2020-04-21 04:52 +0000 [2128eb1f47]  Joshua C. Colp <jcolp@sangoma.com>

	* stream: Enforce formats immutability and ensure formats exist.

	  Some places in Asterisk did not treat the formats on a stream
	  as immutable when they are.

	  The ast_stream_get_formats function is now const to enforce this
	  and parts of Asterisk have been updated to take this into account.
	  Some violations of this were also fixed along the way.

	  An additional minor tweak is that streams are now allocated with
	  an empty format capabilities structure removing the need in various
	  places to check that one is present on the stream.

	  ASTERISK-28846

	  Change-Id: I32f29715330db4ff48edd6f1f359090458a9bfbe

2020-04-21 10:40 +0000 [64e0ce67fc]  sungtae kim <sungtae@messagebird.com>

	* res_ari_channels: Fixed endpoint 80 characters limit

	  Fixed it to copy the entire string from the requested endpoint body except tech-prefix.

	  ASTERISK-28847

	  Change-Id: I91b5f6708a1200363f3267b847dd6a0915222c25

2020-04-20 10:18 +0000 [f3ac42b9bd]  Joshua C. Colp <jcolp@sangoma.com>

	* fax: Fix crashes in PJSIP re-negotiation scenarios.

	  This change fixes a few re-negotiation issues
	  uncovered with fax.

	  1. The fax support uses its own mechanism for
	  re-negotiation by conveying T.38 information in
	  its own frames. The new support for re-negotiating
	  when adding/removing/changing streams was also
	  being triggered for this causing multiple re-INVITEs.
	  The new support will no longer trigger when
	  transitioning between fax.

	  2. In off-nominal re-negotiation cases it was
	  possible for some state information to be left
	  over and used by the next re-negotiation. This
	  is now cleared.

	  ASTERISK-28811
	  ASTERISK-28839

	  Change-Id: I8ed5924b53be9fe06a385c58817e5584b0f25cc2

2020-04-15 15:13 +0000 [c36f34aa90]  Daniel Heckl <daniel.heckl@gmail.com>

	* res_pjsip: Fixed format of IPv6 addresses for external media addresses

	  ASTERISK-28835

	  Change-Id: I66289afd164c5cdd6c5caa39e79d629a467e7a26

2020-04-20 13:11 +0000 [d53925c98a]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: externhost/externaddr with non-default TCP/TLS ports.

	  ASTERISK-28372
	  Reported by: Anton Satskiy

	  ASTERISK-24428
	  Reported by: sstream

	  Change-Id: I2b7432a9bf3b09dc8515297ff955636db7a6224c

2020-04-17 05:41 +0000 [7eb3c2d5ff]  Alexander Traud <pabstraud@compuserve.com>

	* cdr_odbc: Sync load- and build-time deps.

	  MODULEINFO is checked while buidling/linking the module.
	  AST_MODULE_INFO is checked while loading/running the module.

	  ASTERISK-28838

	  Change-Id: I55dc05ce19552d0415c9045021b42bd82ef44e52

2020-04-17 04:47 +0000 [63f57e044d]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip: Sync load- and build-time deps.

	  MODULEINFO is checked while buidling/linking the module.
	  AST_MODULE_INFO is checked while loading/running the module.

	  ASTERISK-28838

	  Change-Id: I4bb868532ca217fec1351885d99eb55c21b58042

2020-04-17 04:18 +0000 [905f8ddc3e]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip_refer: Add build-time dependency.

	  ASTERISK-28838

	  Change-Id: Ic693c3f464e35ec0db242afdb0a1415806af4e25

2020-04-17 05:17 +0000 [d89968fc96]  Alexander Traud <pabstraud@compuserve.com>

	* app_getcpeid: Add build-time dependency.

	  ASTERISK-28838

	  Change-Id: I68b78e7e4718be82507247433127ce3992a5ba96

2020-04-17 06:51 +0000 [ea102bd1a7]  Alexander Traud <pabstraud@compuserve.com>

	* curl: Add build-time dependency.

	  ASTERISK-28838

	  Change-Id: I34724e799e1ffaf723eb2c358abe8934dbadcd52

2020-04-17 04:55 +0000 [5c5f7223ec]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip: Add build-time dependency.

	  ASTERISK-28838

	  Change-Id: Icb08304744ae3f34dce6ccb76f94379b8382a074

2020-04-16 08:15 +0000 [62183bc777]  Joshua C. Colp <jcolp@sangoma.com>

	* confbridge: Add support for disabling text messaging.

	  When in a conference bridge it may be necessary to have
	  text messages disabled for specific participants or for
	  all. This change adds a configuration option, "text_messaging",
	  which can be used to enable or disable this on the
	  user profile. By default existing behavior is preserved
	  as it defaults to "yes".

	  ASTERISK-28841

	  Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13

2020-04-15 13:01 +0000 [dd65a66ecb]  Alexander Traud <pabstraud@compuserve.com>

	* pjproject_bundled: Honor --without-pjproject.

	  ASTERISK-28837

	  Change-Id: Id057324912a3cfe6f50af372675626bb515907d9

2020-04-14 10:48 +0000 [a7c4579979]  Pirmin Walthert <infos@nappsoft.ch>

	* res_rtp_asterisk: Resolve loop when receive buffer is flushed

	  When the receive buffer was flushed by a received packet while it
	  already contained a packet with the same sequence number, Asterisk
	  never left the while loop which tried to order the packets.

	  This change makes it so if the packet is in the receive buffer it
	  is retrieved and freed allowing the buffer to empty.

	  ASTERISK-28827

	  Change-Id: Idaa376101bc1ac880047c49feb6faee773e718b3

2020-04-15 01:20 +0000 [338990d973]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: DiffServ/ToS not only on UDP but also on TCP and TLS sockets.

	  ASTERISK-27195
	  Reported by: Joshua Roys

	  Change-Id: I6e72ecb874200dec7a3865c7babaf5ac0d3101de

2020-04-15 07:16 +0000 [c2f18323fe]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Add libcap for high bits in DiffServ/ToS.

	  works automatically; see Mantis 7047 (now ASTERISK-6863)

	  Change-Id: I27d2c109180bd857b6757fd532de48eddb78aee6

2020-04-15 06:09 +0000 [f44cab8b82]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Only if found LibPRI, check its optional parts.

	  Change-Id: If8445f899ee4ce0c606c484943d4ce0c8e43b5da

2020-04-14 10:31 +0000 [9a928cae86]  Pirmin Walthert <infos@nappsoft.ch>

	* res_rtp_asterisk: Free payload when error on insertion to data buffer

	  When the ast_data_buffer_put rejects to add a packet, for example because
	  the buffer already contains a packet with the same sequence number, the
	  payload will never be freed, resulting in a memory leak.

	  The data buffer will now return an error if this situation occurs
	  allowing the caller to free the payload. The res_rtp_asterisk module
	  has also been updated to do this.

	  ASTERISK-28826

	  Change-Id: Ie6c49495d1c921d5f997651c7d0f79646f095cf1

2020-04-15 02:38 +0000 [dafb58aafd]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Only if found external PJProject, check its optional parts.

	  Change-Id: I11d5693d25c166c99d8cebffc16184d58f6362de

2020-04-08 05:29 +0000 [4af84c5675]  Bernard Merindol <bernard.merindol@telnowedge.com>

	* res_rtp_asterisk.c: Check for first DTMF having timestamp set to 0

	  When the first DTMF receive in RF2833 codec have TimeStamp at 0
	  is not processed.

	  ASTERISK-28812

	  Change-Id: I3196803a062dd2daee4938c9a778c3810cb7e504

2020-04-07 07:05 +0000 [ef4255f6ed]  Jean Aunis <jean.aunis@prescom.fr>

	* func_volume: Accept decimal number as argument

	  Allow voice volume to be multiplied or divided by a floating point number.

	  ASTERISK-28813

	  Change-Id: I5b42b890ec4e1f6b0b3400cb44ff16522b021c8c

2019-12-03 12:35 +0000 [7a00db673a]  Jaco Kroon <jaco@uls.co.za>

	* res_rtp_asterisk: iterate all local addresses looking to populate ICE.

	  By using pjproject to give us a list of candidates, and then filtering,
	  if the host has >32 addresses configured, then it is possible that we
	  end up filtering out all 32 of those, and ending up with no candidates
	  at all.  Instead, get getifaddrs (which pjsip is using underlying
	  anyway) to retrieve all local addresses, and iterate those, adding the
	  first 32 addresses not excluded by the ICE ACL.

	  In our setup at any point in time We've got between 6 and 328 addresses
	  on any given system.  The lower limit is the lower limit but the upper
	  limit is growing on a near daily basis currently.

	  Change-Id: I109eaffc3e2b432f00bf958e3caa0f38cacb4edb
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2020-04-10 08:13 +0000 [e02290ed4f]  Alexander Traud <pabstraud@compuserve.com>

	* pjproject_bundled: Repair ./configure --with-ssl without ARG.

	  ASTERISK-28758
	  Reported by: Patrick Wakano
	  Reported by: Dmitriy Serov

	  Change-Id: Ifb6b85c559d116739af00bc48d1f547caa85efac

2020-04-11 14:03 +0000 [c9e1b4d142]  Jaco Kroon <jaco@uls.co.za>

	* res_pjsip: document legal dtls_verify endpoint options.

	  Change-Id: I7fa7c5c8a7ddb0bd525982f58bff3264ebbd9a1b

2020-04-12 09:53 +0000 [dfdff0f9ec]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Search for Python/C API when possibly needed only.

	  The Python/C API is used only if the Test Framework was enabled in Asterisk
	  'make menuselect'. The Test Framework is available only if the Developer Mode
	  was enabled in Asterisk './configure --enable-dev-mode'. And that Python/C API
	  is used only if the PJProject was found and not disabled in Asterisk; the user
	  did not go for './configure --without-pjproject'.

	  Furthermore, because version 2 of that Python/C API is required (currently) and
	  because some platforms do not offer a generic version 2, the script searches
	  for 2.7 explicitly as well.

	  To avoid version mismatch between the Python/C API and the Python environment,
	  the script searches for the latter in the same versions, in the same the order
	  as well. Because this Python/C API is just for (some) Asterisk contributors,
	  the script also goes for the Python 3 environment as a last resort for all
	  other Asterisk users. This allows 'make full' even on minimal installations of
	  Ubuntu 18.04 LTS and newer.

	  Because the Python/C API is Asterisk contributor specific, the Python packages
	  are removed from the script './contrib/scripts/install_prereq' as this script
	  is intended for Asterisk users. Asterisk contributors have to install much more
	  packages in any case, like:
	  sudo apt install autoconf automake git git-review python2.7-dev

	  ASTERISK-28824
	  ASTERISK-27717

	  Change-Id: Id46d357e18869f64dcc217b8fdba821b63eeb876

2020-04-01 11:52 +0000 [9e0995b1b7]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: TCP/TLS client without server.

	  It is possible to configure a TCP/TLS client without having a TCP/TLS
	  server. In that case, no error or warning was printed but the headers
	  Contact and Via in SIP REGISTER were "(null)".

	  ASTERISK-28798

	  Change-Id: I387ca5cb6a65f1eb675a29c5e41df8ec6c242ab2

2020-04-13 11:27 +0000 [2b2fe947ce]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: Build without PJProject.

	  Change-Id: Ifc5059cd867e77b9c92ed9f4b895a9a91200d3ec

2020-04-13 12:05 +0000 [bde6be092c]  Alexander Traud <pabstraud@compuserve.com>

	* _pjsua: Build even with Clang.

	  Change-Id: Iebf7687613aa0295ea3c82256460b337f1595be2

2020-04-08 14:33 +0000 [48669ea81b]  Kevin Harwell <kharwell@digium.com>

	* chan_pjsip: digit_begin - constant DTMF tone if RTP is not setup yet

	  If chan_pjsip is configured for DTMF_RFC_4733, and the core triggers a
	  digit begin before media, or rtp has been setup then it's possible the
	  outgoing channel will hear a constant DTMF tone upon answering.

	  This happens because when there is no media, or rtp chan_pjsip notifies
	  the core to initiate inband DTMF. However, upon digit end if media, and
	  rtp become available then chan_pjsip does not notify the core to stop
	  inband DTMF. Thus the tone continues playing.

	  This patch makes it so chan_pjsip only notifies the core to start
	  inband DTMF in only the required cases. Now if there is no media, or
	  rtp availabe upon digit begin chan_pjsip does nothing, but tells the
	  core it handled it.

	  ASTERISK-28817 #close

	  Change-Id: I0dbea9fff444a2595fb18c64b89653e90d2f6eb5

2020-04-09 08:25 +0000 [375a578ef1]  Alexander Traud <pabstraud@compuserve.com>

	* bridge_softmix_binaural: Show state in menuselect.

	  ASTERISK-28819

	  Change-Id: Iba7ee7bc7936d7a156171c8fc0f1670e864e7600

2020-04-07 12:44 +0000 [b4edb063e5]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Remove doc/tex and doc/pdf leftovers.

	  Furthermore, the nowhere used compress is removed.

	  ASTERISK-28816

	  Change-Id: I77daab80cfabb56d51c3ea6b1d14bd9b9fbc577c

2020-04-09 07:05 +0000 [33921fd426]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Allow space in path.

	  ASTERISK-28818

	  Change-Id: Ib7f246896457d9e3b14d7f5199136d6545ce0b6f

2020-03-31 15:14 +0000 [3513be1e79]  Sebastien Duthil <sduthil@wazo.community>

	* func_channel: allow reading 4 fields from dialplan

	  The following fields return an error when read from dialplan:

	  - exten
	  - context
	  - userfield
	  - channame

	  ASTERISK-28796 #close

	  Change-Id: Ieacaac629490f8710fdacc9de80ed5916c5f6ee2

2020-04-06 08:00 +0000 [fdb6370759]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: Avoid absolute value on unsigned subtraction.

	  ASTERISK-28809

	  Change-Id: I269731715347c8e5ef7db1b6ffd3f8d15fc04be4

2020-04-03 12:25 +0000 [8021924a46]  Alexander Traud <pabstraud@compuserve.com>

	* chan_unistim: Avoid tautological warnings with clang.

	  ASTERISK-28803

	  Change-Id: I15449621b68d0ad4d57b7c337c1167adb15135af

2020-04-06 09:29 +0000 [bfc9337ab4]  Sean Bright <sean.bright@gmail.com>

	* Revert "res_config_odbc: Preserve empty strings returned by the database"

	  This reverts commit a3a2fbaec685d931d56f669f2d4171220e9977ac.

	  Reason for revert: There is a lot of code that relies on the broken
	  behavior that this fixes.

	  Change-Id: I410c395a0168acbdaf89e616e3cb5e1312d190cb

2020-04-06 06:56 +0000 [7039b764e4]  Alexander Traud <pabstraud@compuserve.com>

	* test_stasis: Avoid always true warning with clang.

	  ASTERISK-28808

	  Change-Id: I5e76831373532d7b8065d024e66cd1fb75dedd80

2020-04-01 04:00 +0000 [1e6b10c137]  Jaco Kroon <jaco@uls.co.za>

	* main/backtrace: binutils-2.34 fix.

	  My tester missed this one previously, have confirmed a positive build
	  this time round.

	  Change-Id: Id06853375954a200f03f9a1b9c97fe0b10d31fbf

2020-03-26 17:42 +0000 [06aa51d14e]  Jason Hord <jhord@fluentstream.com> (license 6978)

	* res_pjsip: Don't set endpoint to unavailable in all cases.

	  When an AOR is modified endpoints are updated that reference
	  the AOR so they can start receiving updates and reflect the
	  correct state. If this is the case then we shouldn't change
	  the endpoint to be offline if it does not reference the AOR
	  but instead only when the endpoint is completely updated for
	  all its AORs.

	  ASTERISK-28056
	  patches:
	    pjsip_options-aor.diff submitted by jhord (license 6978)

	  Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164

2020-03-31 12:52 +0000 [267583f18d]  Kevin Harwell <kharwell@digium.com>

	* channel: write to a stream on multi-frame writes

	  If a frame handling routine returns a list of frames (vs. a single frame)
	  those frames are never passed to a tech's write_stream handler even if one is
	  available. For instance, if a codec translation occurred and that codec
	  returned multiple frames then those particular frames were always only sent
	  to the tech's "write" handler. If that tech (pjsip for example) was stream
	  capable then those frames were essentially ignored. Thus resulting in bad
	  audio.

	  This patch makes it so the "write_stream" handler is appropriately called
	  for all cases, and for all frames if available.

	  ASTERISK-28795 #close

	  Change-Id: I868faea0b73a07ed5a32c2b05bb9cf4b586f739d

2020-03-24 06:43 +0000 [19d31636cf]  Alexander Traud <pabstraud@compuserve.com>

	* test_utils: Avoid incorrect error message on load.

	  In case of no OpenSSL headers, the module was built but did not load.

	  ASTERISK-28789

	  Change-Id: Ie007e84296bcf2bd4237f19d68ba5f932b84cd02

2020-03-26 17:18 +0000 [eb0493cfb8]  sungtae kim <sungtae@messagebird.com>

	* dial.c: Removed dial string 80 character limitation

	  The dial application had 80 characters of destination length
	  limitation. But this limitation causes unexpected dial string
	  cut if the dial string is long.

	  Removed unnecessary limited buffer to support longer dial
	  destination.

	  ASTERISK-27946

	  Change-Id: I72c8f0319a4b47e8180817a66a7e9bde063cb330

2020-03-23 12:25 +0000 [81d271f76a]  Alexander Traud <pabstraud@compuserve.com>

	* func_aes: Avoid incorrect error message on load.

	  In case of no OpenSSL headers, the module func_aes was built but did not load.

	  ASTERISK-28788

	  Change-Id: I0b99b8468cbeb3b0eab23069cbd64062ef885ffc

2020-03-19 04:34 +0000 [bd091949cc]  Torrey Searle <torrey@voxbone.com>

	* res_pjsip_session: implement processing of Content-Disposition

	  RFC5621 requires any content type with a Content-Disposition
	  with handling=required to be rejected with a 415 response

	  ASTERISK-28782 #close

	  Change-Id: Iad969df75936730254b95c1a8bc3b48497070bb4

2020-03-18 08:49 +0000 [85fca26c24]  Jaco Kroon <jaco@uls.co.za>

	* acl: implement a centralized ACL output mechanism for HAs and ACLs.

	  named_acl.c (which is really a named_ha) now uses ast_ha_output.

	  I've also updated main/manager.c to output the actual ACL on "manager
	  show user <username>" if one is set.  If this works then we can add
	  similar to other modules as required.

	  Change-Id: I0ec9876a90dddd379c80ec078d48e3ee6991eb0f

2020-03-26 08:49 +0000 [ebe7749127]  Joshua C. Colp <jcolp@sangoma.com>

	* chan_sip: Send 403 when ACL fails.

	  Change-Id: I0910c79196f2b7c7e5ad6f1db95e83800ac737a2

2020-03-26 11:42 +0000 [99869810a1]  Joshua C. Colp <jcolp@sangoma.com>

	* CHANGES: Change md file extension to txt.

	  Change-Id: I168e2d3a65d444fb0961bd228257441fe718f6a7
	  (cherry picked from commit c9cd68126152bae26d42f5b9ce8811ddf1eda4d8)

2020-03-23 05:49 +0000 [1c5129bca4]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_session: Apply intention behind requested formats.

	  When an outgoing channel is created a list of formats may
	  optionally be provided which is used as a request that the
	  formats be used if possible. If an endpoint is not configured
	  for any of the formats we ignore this request and use what is
	  configured. This has the side effect of also including other
	  stream types (such as video) that were not present in the
	  requested formats.

	  This change makes it so that the intention of the request is
	  preserved - that is if only an audio format is requested then
	  even if there is no joint audio format between the request and
	  the configuration we will still only place an audio stream in
	  the outgoing call.

	  ASTERISK-28787

	  Change-Id: Ia54c0c63e94aca176169b9bae4bb8a8380ea245f

2020-03-25 04:38 +0000 [7771a198d5]  Joshua C. Colp <jcolp@sangoma.com>

	* res_rtp_asterisk: Ensure sufficient space for worst case NACK.

	  ASTERISK-28790

	  Change-Id: I10df52f98b19ed62575f25dab36e82d136dccd99

2020-03-17 15:54 +0000 [ebddff3453]  Kevin Harwell <kharwell@digium.com>

	* ast_coredumper: add Asterisk information dump

	  This patch makes it so ast_coredumper now outputs the following information to
	  a *-info.txt file when processing a core file:

	    asterisk version and "built by" string
	    BUILD_OPTS
	    system start, and last reloaded date/time
	    taskprocessor list
	    equivalent of "bridge show all"
	    equivalent of "core show channels verbose"

	  Also a slight modification was made when trying to obtain the pid(s) of a
	  running Asterisk. If it fails to retrieve any it now reports an error.

	  Change-Id: I54f35c19ab69b8f8dc78cc933c3fb7c99cef346b

2020-03-20 09:12 +0000 [ff0e685eea]  Jaco Kroon <jaco@uls.co.za>

	* netsock2: compile fixes.

	  This fixes ast_addressfamily_to_sockaddrsize to reference the
	  provided argument, and ast_sockaddr_from_sockaddr to not use the name of
	  a structure as argument.

	  Change-Id: Ibf5db469c47c3b4214edf8456326086174e8edd7

2020-03-18 04:21 +0000 [d278350768]  Jaco Kroon <jaco@uls.co.za>

	* dahdiras: Only set plugin dahdi.so to pppd if we're running as root.

	  Users of this should set plugin dahdi.so in their options file.

	  ASTERISK-16676

	  Change-Id: I6d01ad0a10e9fea477876d0941c3f38aac357e91

2020-03-18 04:38 +0000 [9cd46ec118]  Jaco Kroon <jaco@uls.co.za>

	* dundi:  fix NULL dereference.

	  If a negative (error) return is received from dundi_lookup_internal,
	  this is not handled correctly when assigning the result to the buffer.
	  As such, use a signed integer in the assignment and do a proper
	  comparison.

	  ASTERISK-21205

	  Change-Id: I5214ebb6491e2bd14f90c7d3ce229da86888f739

2020-03-19 13:34 +0000 [0b92aa4c49]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_sdp_rtp: Only do hold/unhold on default audio stream.

	  When examining a stream to determine hold/unhold information we
	  only care about the default audio stream. Other streams aren't
	  used for hold/unhold.

	  ASTERISK-28784

	  Change-Id: I7a1f10f07822c4aee1f98a38b9628849b578afe4

2020-02-14 02:45 +0000 [ac3a81992a]  Sungtae Kim <sungtae@messagebird.com>

	* res_pjsip_session: Fixed wrong session termination

	  When the Asterisk receives 200 OK with invalid SDP,
	  the Asterisk/PJPROJECT terminating the session.
	  But if the channel was in the Bridge, Asterisk tries send
	  the Re-Invite before terminating the session.
	  And when the Asterisk sending the Re-Invite, it doesn't check
	  the SDP is NULL or not. This crashes the Asterisk.

	  Fixed it to close the session correctly if the UAS sends the
	  200 OK with wrong SDP.

	  ASTERISK-28743

	  Change-Id: Ifa864e0e125b1a7ed2f3abd4164187e1dddc56da

2020-03-18 04:49 +0000 [21c9f30ba8]  Jaco Kroon <jaco@uls.co.za>

	* build: enable building with uClibc

	  This patch has been included in Gentoo distribution for at least since
	  asterisk 1.8, but there are references in the logs going back as far as
	  1.0.0 - not sure if this is still required in any way, it does apply,
	  and it doesn't (as far as we can determine) cause build failures.

	  Change-Id: I46d8845e30200205e80580680bf060aa3012ba54

2020-03-18 04:43 +0000 [6262b74303]  Jaco Kroon <jaco@uls.co.za>

	* build: search from newest to oldest for gmime.

	  We (Gentoo distribution) reckon that in the case of multiple versions of
	  gmime installed we should prefer the newest one.

	  Change-Id: Idf7be613230232eb1d573d93c4a5a8297f4ecd2d

2020-03-19 08:48 +0000 [c86af00ce1]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_session: Don't restrict non-audio default streams to sendrecv.

	  The state of the default audio stream is used for hold/unhold so we
	  restrict it to sendrecv as the core does not handle when it changes as
	  a result of hold/unhold.

	  This restriction does not apply to other media types though so we now
	  only restrict it to audio. This allows the other default streams to
	  store their state at all values, and not just sendrecv and removed.

	  ASTERISK-28783

	  Change-Id: I139740f38cea7f7d92a876ec2631ef50681f6625

2020-03-06 10:50 +0000 [b2e0c6cacc]  Michael Neuhauser <mike@firmix.at>

	* chan_psip, res_pjsip_sdp_rtp: ignore rtptimeout if direct-media is active

	  Do not hang up a PJSIP channel on RTP timeout if that channel is in
	  a direct-media bridge. Also reset the time of the last received RTP packet when
	  direct-media ends (wait full rtp_timeout period before checking first time after
	  audio came back to Asterisk).

	  ASTERISK-28774
	  Reported-by: Michael Neuhauser

	  Change-Id: I8b62012be7685849e8fb2b1c5dd39d35313ca2d1

2019-11-27 07:54 +0000 [351b2be00a]  Jaco Kroon <jaco@uls.co.za>

	* res_rtp_asterisk: implement ACL mechanism for ICE and STUN addresses.

	  A pure blacklist is not good enough, we need a whitelist mechanism as
	  well, and the simplest way to do that is to re-use existing ACL
	  infrastructure.

	  This makes it simpler to blacklist say an entire block (/24) except a
	  smaller block (eg, a /29 or even a /32).  Normally you'd need to
	  recursively split the block, so if you want to blacklist a /24 except
	  for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28.  I
	  feel that having an ACL instead of a blacklist only is clearer.

	  Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2020-03-16 05:11 +0000 [33b2c7f79b]  Jaco Kroon <jaco@uls.co.za>

	* Update main/backtrace.c to deal with changes in binutils 2.34.

	  binutils 2.34 merged this commit:

	  https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;\
	  	h=fd3619828e94a24a92cddec42cbc0ab33352eeb4

	  Which effectively does things like:

	  -#define bfd_section_size(bfd, ptr) ((ptr)->size)
	  -#define bfd_get_section_size(ptr) ((ptr)->size)

	  +#define bfd_section_size(sec) ((sec)->size)

	  So in order to remain backwards compatible we need to detect this API
	  change, and adjust accordingly.  The simplest is to notice that the
	  bfd_get_section_size and bfd_get_section_vma MACROs are no longer
	  defined, and define then onto the new API.  The alternative is to litter
	  the code with a number of #ifdef #else #endif splatters right through
	  the code.

	  Change-Id: I3efe0f8e8f3e338d16fcbc2b26a505367b6e172f

2020-03-15 09:07 +0000 [268b0a3085]  Sean Bright <sean.bright@gmail.com>

	* func_odbc.conf.sample: Clarify sample documentation

	  ASTERISK-20325 #close

	  Change-Id: I06cb9b467b0fd06c8af2a5aee049f872c09cc4b6

2020-03-13 13:43 +0000 [2a3b2d5781]  Sean Bright <sean.bright@gmail.com>

	* chan_vpb: Fix 'catching polymorphic type ... by value' error

	  Fixes the following compile error:

	      chan_vpb.cc:2688:26: error: catching polymorphic type
	          ‘class std::exception’ by value

	  Change-Id: Ic87bc357d72427d77626735c83200fd278a7a649

2020-03-09 19:07 +0000 [479723f3cc]  Sean Bright <sean.bright@gmail.com>

	* dns_txt: Add TXT record parsing support

	  Change-Id: Ie0eca23b8e6f4c7d9846b6013d79099314d90ef5

2020-03-12 09:22 +0000 [c40050d350]  Joshua C. Colp <jcolp@sangoma.com>

	* audiohook: Don't allow audiohooks to attach to hung up channels.

	  Given a scenario where MixMonitor was initiated over AMI it
	  was possible for the channel and MixMonitor thread to remain
	  alive past hang up of the channel. This scenario required
	  the AMI initiated MixMonitor to retrieve the channel, a
	  hangup to occur on the channel in another thread, and then
	  for MixMonitor to actually start. If this occurred the
	  MixMonitor thread would remain alive indefinitely and
	  the channel reference would remain.

	  This change ensures that audiohooks are never able to
	  be attached to channels that have been hung up. An
	  additional fix has also been done in app_mixmonitor to
	  properly release the channel reference if this occurs.

	  ASTERISK-28780

	  Change-Id: I8044c06daa06f0f16607788c596f55623be26f58

2020-03-04 15:45 +0000 [59a708a935]  George Joseph <gjoseph@digium.com>

	* CI: Create generic jenkinsfile

	  This is a generic jenkinsfile to build Asterisk and optionally
	  perform one or more of the following:
	   * Publish the API docs to the wiki
	   * Run the Unit tests
	   * Run Testsuite Tests

	  This job can be triggered manually from Jenkins or be triggered
	  automatically on a schedule based on a cron string.

	  Change-Id: Id9d22a778a1916b666e0e700af2b9f1bacda0852

2020-03-06 10:13 +0000 [f2ba1919e6]  Torrey Searle <torrey@voxbone.com>

	* res_rtp_asterisk: Send correct sender SSRC when p2p bridge in use

	  bridge_p2p_rtp_write will forward rtp to the bridged rtp instance
	  without modifying the ssrc.  However, it is not updating the SSRC
	  in the bridged rtp.  Thus, when SSRC packets are generated, they
	  have the correct SSRC for the sender.

	  ASTERISK-28773 #close

	  Change-Id: I39f923bde28ebb4f0fddc926b92494aed294a478

2020-03-05 03:08 +0000 [1efd90b72b]  Torrey Searle <torrey@voxbone.com>

	* res_pjsip_sdp_rtp: Don't wait for ICE if not negotiated

	  If ICE support is enabled but not negotiated, the rtp->ice structure is
	  not being destroyed. This leads to Asterisk waiting for ICE to complete
	  instead of immediately starting the DTLS handshake, resulting in the
	  call leg having no RTP.

	  ASTERISK-28769 #close

	  Change-Id: I17c137546dc9ecfb9583c24dcf4c2ced8bbd7a27

2020-02-25 18:30 +0000 [4495e64b7c]  Paulo Vicentini <paulo.vicentini@gmail.com>

	* chan_pjsip: Check audio frame when remote SSRC changes.

	  If the SSRC of a received RTP packet differed from the previous SSRC
	  an SSRC change control frame would be queued ahead of the media
	  frame. In the case of audio this would result in the format of the
	  audio frame not being checked, and if it differed or was not allowed
	  then it could cause the call to drop due to failure to set up a
	  translation path.

	  The chan_pjsip module will now no longer assume the first frame
	  will be the audio frame and instead goes through the complete list
	  to find it.

	  ASTERISK-28759

	  Change-Id: I6d854cc523f343e299a615636fc65bdbd5f809ec

2020-03-06 14:59 +0000 [acaf24e23c]  Sean Bright <sean.bright@gmail.com>

	* enum.c: Add support for regular expression flag in NAPTR record

	  A regular expression in a NAPTR response record can have a trailing
	  'i' flag to indicate that the expression should be evaluated in a
	  case-insensitive way. We were not checking for that flag which caused
	  the record parsing to fail on otherwise valid input.

	  Although this change will initially go into Asterisk 13, 16, and 17,
	  it is my intention to replace the majority of this code in 16 and up -
	  including this fix - by changing enum.c to consume the new DNS API
	  which duplicates most of this logic already. Asterisk 13 doesn't have
	  the DNS API, so this fix will be as good as it gets.

	  ASTERISK-26711 #close
	  Reported by: Vitold

	  Change-Id: I33943a5b3e7539c6dca3a5079982ee15a08186f0

2020-03-06 06:10 +0000 [a9abe55e0b]  Jared Smith <jsmith@fedoraproject.org>

	* indications.conf.sample: Add indication tones for Indonesia

	  These tones come from http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf

	  ASTERISK-23407

	  Change-Id: I48e2285f1e5bb29b3335f762006f66c423d0fcb8

2020-03-03 08:42 +0000 [7dcabaef08]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* res_rtp_asterisk: Add 'rtp show settings' cli command

	  This change introduce a CLI command for the RTP to display the general
	  configuration.

	  In the first step add the follow fields of the configurations:
	    - rtpstart
	    - rtpend
	    - dtmftimeout
	    - rtpchecksum
	    - strictrtp
	    - learning_min_sequential
	    - icesupport

	  Change-Id: Ibe5450898e2c3e1ed68c10993aa1ac6bf09b821f

2020-03-04 16:53 +0000 [9a111d188f]  Sean Bright <sean.bright@gmail.com>

	* enum.c: Make ast_get_txt() actually do something.

	  The ast_get_txt() API function (and by extension, the TXTCIDNAME
	  dialplan function) were broken in
	  65b8381550a9f46fdce84de79960073e9d51b05d such that we would never
	  actually make a DNS TXT query as described.

	  This patch restores the documented behavior.

	  ASTERISK-19460 #close
	  Reported by: George Joseph

	  Change-Id: I1b19aea711488cb1ecd63843cddce05010e39376

2020-03-05 17:39 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.9.0-rc1 Released.

2020-03-05 11:23 +0000 [1522c4467c]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.9.0
2020-03-03 10:57 +0000 [f529d56f76]  lvl <digium@lvlconsultancy.nl>

	* res_pjsip_refer: ensure refer progress is still sent after Proceeding()

	  ASTERISK-28766 #close

	  Change-Id: I5ce2210062f9325db762edbf6e46075079bb2cd1

2020-01-12 05:37 +0000 [06e8d5ad8e]  Sebastian Kemper <sebastian_ml@gmx.net>

	* check_expr2: fix cross-compile/hardening issues

	  When building check_expr2 with ASLR PIE hardening enabled the linker
	  fails. This is resolved by adding the regular compiler flags when
	  building the object files from ast_expr2f.c and ast_expr2.c.

	  Note: The STANDALONE define is removed because it is already defined in
	  _ASTCFLAGS. YY_NO_INPUT is defined so that the compile survives
	  '--enable-dev-mode'.

	  Also, a Makefile variable "CROSS_COMPILING" is added so that the
	  build system doesn't try to run check_expr2 when cross-compiling,
	  because that will fail the build as will.

	  ASTERISK-28685 #close

	  Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
	  Change-Id: If435b7db9f9ad8266245bda51c81c220f9658915

2020-02-20 11:33 +0000 [f295af447d]  Joshua C. Colp <jcolp@sangoma.com>

	* res_rtp_asterisk: Improve video performance in certain networks.

	  The receive buffer will now grow if we end up flushing the
	  receive queue after not receiving the expected packet in time.
	  This is done in hopes that if this is encountered again the
	  extra buffer size will allow more time to pass and any missing
	  packets to be received.

	  The send buffer will now grow if we are asked for packets and
	  can't find them. This is done in hopes that the packets are
	  from the past and have simply been expired. If so then in
	  the future with the extra buffer space the packets should be
	  available.

	  Sequence number cycling has been handled so that the
	  correct sequence number is calculated and used in
	  various places, including for sorting packets and
	  for determining if a packet is old or not.

	  NACK sending is now more aggressive. If a substantial number
	  of missing sequence numbers are added a NACK will be sent
	  immediately. Afterwards once the receive buffer reaches 25%
	  a single NACK is sent. If the buffer continues to grow and
	  reaches 50% or greater a NACK will be sent for each received
	  future packet to aggressively ask the remote endpoint to
	  retransmit.

	  ASTERISK-28764

	  Change-Id: I97633dfa8a09a7889cef815b2be369f3f0314b41

2020-02-24 17:16 +0000 [fc1d93cf97]  Kevin Harwell <kharwell@digium.com>

	* message & stasis/messaging: make text message variables work in ARI

	  When a text message was received any associated variable was not written to
	  the ARI TextMessageReceived event. This occurred because Asterisk only wrote
	  out "send" variables. However, even those "send" variables would fail ARI
	  validation due to a TextMessageVariable formatting bug.

	  Since it seems the TextMessageReceived event has never been able to include
	  actual variables it was decided to remove the TextMessageVariable object type
	  from ARI, and simply return a JSON object of key/value pairs for variables.
	  This aligns more with how the ARI sendMessage handles variables, and other
	  places in ARI.

	  That being the case, and since this is technically an API breaking change (no
	  one should really be affected since things never really worked) the ARI version
	  was updated to reflect that.

	  ASTERISK-28755 #close

	  Change-Id: Ia6051c01a53b30cf7edef84c27df4ed4479b8b6f

2020-02-24 09:00 +0000 [9ecb651564]  Torrey Searle <torrey@voxbone.com>

	* res/res_pjsip_sdp_rtp: Fix MOH transitions

	  Update the state of remote_hold immediately on receipt of remote
	  SDP so that the information is available when building the SDP
	  answer

	  ASTERISK-28754 #close

	  Change-Id: I7026032a807e9c95081cb8f060400b05deb4836f

2020-02-24 08:39 +0000 [ad5a81aac4]  Walter Doekes <walter+github@wjd.nu>

	* say: Remove unused "plural" option from main/say

	  There are exceptions for plural objects, but they are detected using the
	  supplied NUMBER, not using an extra option.

	  Change-Id: I95d1d1b2796b1aba92048a2dbae8a3856ed8a113

2020-02-25 03:51 +0000 [b12ecbe27f]  Walter Doekes <walter+asterisk@wjd.nu>

	* app_queue: Refactor odd placement of if's around say_position

	  Change-Id: Icba97905e331812f129e5966e91a59b104c7a748

2020-02-24 12:44 +0000 [dd959bf8d0]  Kevin Harwell <kharwell@digium.com>

	* format_cap: make function parameters 'const'

	  There were a couple places where the format cap function parameter was not
	  'const' when it should have been. This patch makes them 'const'.

	  Change-Id: Ife753fb16a962d842a6b44f45363a61a66bfdb2e

2020-02-20 06:52 +0000 [7d1305ac21]  Jaco Kroon <jaco@uls.co.za>

	* addons/res_config_mysql: silense warnings about printf format errors.

	  Warnings without this:

	  res_config_mysql.c: In function 'update2_mysql':
	  res_config_mysql.c:741:15: warning: format '%llu' expects argument of type
	      'long long unsigned int', but argument 6 has type 'my_ulonglong'
	      {aka 'long unsigned int'} [-Wformat=]
	  ast_debug(1, "MySQL RealTime: Updated %llu rows on table: %s\n",
	      numrows, tablename);

	  (reformatted for readability within line-wrap)

	  Change-Id: I2af4d419a37c1a7eeee750cf9ae4a9a2b3a37fd3

2020-02-18 07:10 +0000 [b20a215ea7]  Joshua C. Colp <jcolp@sangoma.com>

	* pjsip: Update ACLs on named ACL changes.

	  This change extends the Sorcery API to allow a wizard to be
	  told to explicitly reload objects or a specific object type
	  even if the wizard believes that nothing has changed.

	  This has been leveraged by res_pjsip and res_pjsip_acl to
	  reload endpoints and PJSIP ACLs when a named ACL changes.

	  ASTERISK-28697

	  Change-Id: Ib8fee9bd9dd490db635132c479127a4114c1ca0b

2020-02-19 13:20 +0000 [c32b4c7dc0]  Sean Bright <sean.bright@gmail.com>

	* tcptls.c: Log more informative OpenSSL errors

	  Dump OpenSSL's error stack to the error log when things fail.

	  ASTERISK-28750 #close
	  Reported by: Martin Zeh

	  Change-Id: Ib63cd0df20275586e68ac4c2ddad222ed7bd9c0a

2020-02-19 08:38 +0000 [cf1f2dfe8e]  Sean Bright <sean.bright@gmail.com>

	* ast_tls_cert: Allow private key size to be set on command line

	  The default size in release branches will be 1024 but we'll use 2048 in master.

	  ASTERISK~28750

	  Change-Id: I435cea18bdd58824ed2b55259575c7ec7133842a

2020-02-13 13:39 +0000 [7eab841093]  George Joseph <gjoseph@digium.com>

	* res_pjsip_outbound_registration: Fix SRV failover on timeout

	  In order to retry outbound registrations for some situations, we
	  need access to the tdata from the original request.  For instance,
	  for 401/407 responses we need it to properly construct the
	  subsequent request with the authentication.  We also need it if
	  we're iterating over a DNS SRV response record set so we can skip
	  entries we've already tried.

	  We've been getting the tdata from the server response rdata and
	  transaction but that only works for the failures where there was
	  actually a response (4XX, 5XX, etc).  For timeouts there's no
	  response and therefore no rdata or transaction from which to get
	  the tdata.  When processing a single A/AAAA record for a server,
	  this wasn't an issue as we just retried that same server after the
	  retry timer expired.  If we got an SRV record set for the server
	  though, without the state from the tdata, we just kept trying the
	  first entry in the set repeatedly instead of skipping to the next
	  one in the list.

	  * Added a "last_tdata" member to the client state structure to keep
	    track of the sent tdata.

	  * Updated registration_client_send() to save the tdata it used into
	    the client_state.

	  * Updated sip_outbound_registration_response_cb() to use the tdata
	    saved in client_state when we don't get a response from the
	    server. We still use the tdata from the transaction when we DO
	    get a response from the server so we can properly handle 4XX
	    responses where our new request depends on it.

	  General note on timeouts:

	  Although res_pjsip_outbound_registration skips to the next record
	  immediately when a timeout occurs during SRV set traversal, it's
	  pjproject that determines how long to wait before a timeout is
	  declared.  As with other SIP message types, pjproject will continue
	  trying the same server at an interval specified by "timer_t1" until
	  "timer_b" expires.  Both of those timers are set in the pjsip.conf
	  "system" section.

	  ASTERISK-28746

	  Change-Id: I199b8274392d17661dd3ce3b4d69a3968368fa06

2020-01-04 18:11 +0000 [423b0e68ce]  Joshua C. Colp <jcolp@sangoma.com>

	* bridging: Add better support for adding/removing streams.

	  This change adds support to bridge_softmix to allow the addition
	  and removal of additional video source streams. When such a change
	  occurs each participant is renegotiated as needed to reflect the
	  update. If another video source is added then each participant
	  gets another source. If a video source is removed then it is
	  removed from each participant. This functionality allows you to
	  have both your webcam and screenshare providing video if you
	  desire, or even more streams. Mapping has been changed to use
	  the topology index on the source channel as a unique identifier
	  for outgoing participant streams, this will never change and
	  provides an easy way to establish the mapping.

	  The bridge_simple and bridge_native_rtp modules have also been
	  updated to renegotiate when the stream topology of a party changes
	  allowing the same behavior to occur as added to bridge_softmix.
	  If a screen share is added then the opposite party is renegotiated.
	  If that screen share is removed then the opposite party is
	  renegotiated again.

	  Some additional fixes are also included in here. Stream state is
	  now conveyed in SDP so sendonly/recvonly/inactive streams can
	  be requested. Removed streams now also remove previous state
	  from themselves so consumers don't get confused.

	  ASTERISK-28733

	  Change-Id: I93f41fb41b85646bef71408111c17ccea30cb0c5

2020-01-23 13:17 +0000 [411d3a2f75]  Ben Ford <bford@digium.com>

	* RTP/ICE: Send on first valid pair.

	  When handling ICE negotiations, it's possible that there can be a delay
	  between STUN binding requests which in turn will cause a delay in ICE
	  completion, preventing media from flowing. It should be possible to send
	  media when there is at least one valid pair, preventing this scenario
	  from occurring.

	  A change was added to PJPROJECT that adds an optional callback
	  (on_valid_pair) that will be called when the first valid pair is found
	  during ICE negotiation. Asterisk uses this to start the DTLS handshake,
	  allowing media to flow. It will only be called once, either on the first
	  valid pair, or when ICE negotiation is complete.

	  ASTERISK-28716

	  Change-Id: Ia7b68c34f06d2a1d91c5ed51627b66fd0363d867

2020-02-17 08:05 +0000 [cd8b27dcc2]  Sean Bright <sean.bright@gmail.com>

	* app_mixmonitor: Set MIXMONITOR_FILENAME to correct value when wav49 is used

	  When opening a file for writing, Asterisk silently converts filenames
	  ending with 'wav49' to 'WAV.' We aren't taking that in to account when
	  setting the MIXMONITOR_FILENAME variable in MixMonitor.

	  * If the user wants to write to a wav49 file, make sure that it is
	    reflected properly in MIXMONITOR_FILENAME.

	  * Add a note to the documentation describing this behavior.

	  * Add a note in main/file.c indicating that app_mixmonitor needs to be
	    changed if the logic in build_filename was changed.

	  ASTERISK-24798 #close
	  Reported by: xrobau

	  Change-Id: I384691ce624eb55c80a125b9ca206d2d691c574c

2020-02-12 10:05 +0000 [afcc838796]  Torrey Searle <torrey@voxbone.com>

	* res_pjsip_sdp_rtp: implement hold state handling on moh_passthrough

	  When moh_passthrough is used, asterisk is only generating invites
	  of type sendonly and sendrecv instead of taking fully into account
	  the on hold state of the local and remote parties

	  ASTERISK-28738 #close

	  Change-Id: Iaaad9fbc033cb14803d433b8a4071bc337047761

2020-02-15 08:01 +0000 [df52f713f5]  Joshua C. Colp <jcolp@sangoma.com>

	* stasis: Use format specifier for size_t.

	  Change-Id: Ic9b4afcc5398e7f46314419fc3c90433d818e35c

2020-02-13 15:08 +0000 [bb783b0c11]  Kevin Harwell <kharwell@digium.com>

	* res_rtp_asterisk: bad audio (static) due to incomplete dtls/srtp setup

	  There was a race condition between client initiated DTLS setup, and handling
	  of server side ice completion that caused the underlying SSL object to get
	  cleared during DTLS initialization. If this happened Asterisk would be left
	  in a partial DTLS setup state. RTP packets were sent and received, but were
	  not being encrypted and decrypted. This resulted in no audio, or static.

	  Specifically, this occurred when '__rtp_recvfrom' was processing the handshake
	  sequence from the client to the server, and then 'ast_rtp_on_ice_complete'
	  gets called from another thread and clears the SSL object when calling the
	  'dtls_perform_setup' function. The timing had to be just right in the sense
	  that from the external SSL library perspective SSL initialization completed
	  (rtp recv), Asterisk clears/resets the SSL object (ice done), and then checks
	  to see if SSL is intialized (rtp recv). Since it was cleared, Asterisk thinks
	  it is not finished, thus not completing 'dtls_srtp_setup'.

	  This patch removes calls to 'dtls_perform_setup', which clears the SSL object,
	  in 'ast_rtp_on_ice_complete'. When ice completes, there is no reason to clear
	  the underlying SSL object. If an ice candidate changes a full protocol level
	  renegotiation occurs. Also, in the case of bundled ICE candidates are reused
	  when a stream is added. So no real reason to have to clear, and reset in this
	  instance.

	  Also, this patch adds a bit of extra logging to aid in diagnosis of any future
	  problems.

	  ASTERISK-28742 #close

	  Change-Id: I34c9e6bad5a39b087164646e2836e3e48fe6892f

2020-02-11 07:46 +0000 [1e94cfdf4c]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Avoid spurious warning when 'format' is the empty string

	  The change to res_config_odbc that allowed empty strings to be
	  returned to realtime consumers¹ causes a warning to be emitted when
	  loading MoH classes. So we need to treat an empty 'format' as if it
	  was not specified to avoid the warning.

	  ASTERISK-28735 #close
	  Reported by: Ross Beer

	  [1] https://gerrit.asterisk.org/c/asterisk/+/13722

	  Change-Id: I9a271d721e1a0973e80ebe7d75b46a0d8fa0e5a5

2020-02-10 15:40 +0000 [65ff4d80a1]  Sean Bright <sean.bright@gmail.com>

	* func_odbc: Prevent snprintf() truncation warning

	  For reasons that are not clear to me - this only appears for me when
	  _not_ building in dev-mode.

	  Change-Id: Ib45c54daaea8e0d571cb470cab1daaae2edba968

2020-02-10 05:04 +0000 [b438d1d9ad]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_session: Fix off-nominal session refreshes.

	  Given a scenario where session refreshes occur close to
	  each other while another is finishing it was possible for
	  the session refreshes to occur out of order. It was
	  also possible for session refreshes to be delayed for
	  quite some time if a session refresh did not result in
	  a topology change.

	  For the out of order session refreshes the first session
	  refresh would be queued due to a transaction in progress.
	  This transaction would then finish. When finished a
	  separate task to process the delayed requests queue
	  would be queued for handling. A second refresh would
	  be requested internally before this delayed request
	  queued task was processed. As no transaction was in
	  progress this session refresh would be immediately
	  handled before the queued session refresh.

	  The code will now check if any delayed requests exist
	  before allowing a session refresh to immediately occur.
	  If any exist then the session refresh is queued.

	  For the delayed session refreshes if a session refresh
	  did not result in a topology change the attempt would
	  be immediately stopped and no other delayed requests would
	  be processed.

	  The code will now go through the entire delayed requests
	  queue until a delayed request results in a request
	  actually being sent.

	  ASTERISK-28730

	  Change-Id: Ied640280133871f77d3f332be62265e754605088

2020-02-07 13:44 +0000 [1544f74932]  George Joseph <gjoseph@digium.com>

	* doc: Fix CHANGES entries to have .txt suffix and update READMEs

	  Although the wiki page for the new CHANGES and UPGRADE scheme
	  states that the files must have the ".txt" suffix, the READMEs
	  didn't.

	  Change-Id: I490306aa2cc24d6f014738e9ebbc78592efe0f05
	  (cherry picked from commit 7416703f04f12eb583a3427a3f64d06951c18c6e)

2020-02-05 02:26 +0000 [40b834ad8c]  Sylvain Afchain <safchain@gmail.com>

	* install_prereq: Install aptitude non-interactively

	  Currently aptitude is installed using interactive mode. This patch
	  changes this to use the non-interactive mode as it can block
	  automatic dependencies installation, ex: CI, Docker build.

	  ASTERISK-28726 #close

	  Change-Id: I271ee00d230513a6f044810351a32d83b2181133
	  (cherry picked from commit 0c02d0a4500cbd4f657c26eb609928c110ebccb9)

2020-01-31 06:58 +0000 [34ce90a9e7]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Return 503 if we're out of RTP ports

	  If you're for some reason out of RTP ports, chan_sip would previously
	  responde to an INVITE with a 403, which will fail the call.

	  Now, it returns a 503, allowing the device/proxy to retry the call on a
	  different machine.

	  ASTERISK-28718

	  Change-Id: I968dcf6c1e30ecddcce397dcda36db727c83ca90

2020-01-28 02:34 +0000 [35b4f1686b]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Clarify in sample docs how directmediapermit/-acl should be used

	  It said "restrict [...] which peers should be able to pass [audio]
	  to each other".

	  However, these settings are not global (for which you would expect
	  signaling IPs to be checked). These settings are available per peer
	  only, and the IPs being checked, are the RTP IPs.

	  Change-Id: I2a6c6cd7c2f5f30d1df4844e3e0308a077021660

2020-02-04 08:18 +0000 [f4132eec19]  Joshua C. Colp <jcolp@sangoma.com>

	* res_rtp_asterisk: Don't produce transport-cc if no packets.

	  The code assumed that when the transport-cc feedback
	  function was called at least one packet will have been
	  received. In practice this isn't always true, so now
	  we just reschedule the sending and do nothing.

	  Change-Id: Iabe7b358704da446fc3b0596b847bff8b8a0da6a

2020-02-03 10:24 +0000 [d6574cb7c7]  George Joseph <gjoseph@digium.com>

	* message.c: Add option to suppress the Message channel AMI and ARI events

	  In order to reduce the amount of AMI and ARI events generated,
	  the global "Message/ast_msg_queue" channel can be set to suppress
	  it's normal channel housekeeping events such as "Newexten",
	  "VarSet", etc. This can greatly reduce load on the manager
	  and ARI applications when the Digium Phone Module for Asterisk
	  is in use.  To enable, set "hide_messaging_ami_events" in
	  asterisk.conf to "yes"  In Asterisk versions <18, the default
	  is "no" preserving existing behavior.  Beginning with
	  Asterisk 18, the option will default to "yes".

	  NOTE:  This change does not affect UserEvents or the ARI
	  TextMessageReceived events.

	  * Added the "hide_messaging_ami_events" option to asterisk.conf.

	  * Changed message.c to set the AST_CHAN_TP_INTERNAL property on
	    the "Message/ast_msg_queue" channel if the option is set in
	    asterisk.conf.  This suppresses the reporting of the events.

	  Change-Id: Ia2e3516d43f4e0df994fc6598565d6bba2d7018b

2020-01-29 08:57 +0000 [d8d989b9bf]  Sean Bright <sean.bright@gmail.com>

	* res_config_odbc: Preserve empty strings returned by the database

	  When res_config_odbc (and perhaps other realtime backends) reads a SQL
	  NULL from the database, it coalesces the value to the empty string
	  which prevents it from being returned to the realtime core.

	  However, if it instead reads the empty string from the database, it
	  needs a way to encode that fact without having the value omitted
	  entirely. It does this by changing the value to a string with a single
	  space. The realtime code in main/config.c recognizes this special case
	  and _turns the string back into the empty string_ before passing it to
	  realtime API consumers.

	  For all of this to work, we need to ensure that we actually pass the
	  single-space-string back to the realtime core, which is currently
	  failing because we are trimming the value before checking its
	  content. So instead we now special case the single-space-string case
	  so that empty values are returned properly.

	  ASTERISK-28719 #close
	  Reported by: EDV O-TON

	  Change-Id: I673ed8c31ad037aa224e80c78c7a1dc4e4a4e3de

2020-01-28 13:23 +0000 [2a6b09e2e8]  Sean Bright <sean.bright@gmail.com>

	* res_stasis_playback: Prevent media_index from going out of bounds

	  Incrementing stasis_app_playback.media_index directly in our playback
	  loop means that when we reach the end of our playlist the index into
	  the vector will be outside of the bounds of the vector.

	  Instead use a temporary variable and only assign when we're sure that
	  we are in bounds.

	  ASTERISK-28713 #close
	  Reported by: Sébastien Duthil

	  Change-Id: Ib53f7f156097e0607eb5871d9d78d246ed274928

2020-01-28 09:18 +0000 [4d32f5747c]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_pubsub: Increment persistence data ref when recreating.

	  Each subscription needs to have a reference to the persisted data
	  for it, as well as the main JSON contained within the tree. When
	  recreating a subscription this did not occur and they both shared
	  the same reference.

	  ASTERISK-28714

	  Change-Id: I706abd49ea182ea367a4ac3feca2706460ae9f4a

2020-01-27 19:58 +0000 [2a9a1789e7]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_messaging: Allow Content-Type to be overridden

	  ASTERISK-26082 #close
	  Reported by: Alex

	  Change-Id: I6549e90932016349bc72b0f053432dc25286f4fb

2020-01-27 12:01 +0000 [e103339f02]  Kevin Harwell <kharwell@digium.com>

	* stasis/app: don't lock an app before a call to send

	  Calling 'app_send' eventually calls the app's message handler. It's possible
	  for a handler to obtain a lock on another object, and then need/want to lock
	  the app object. If the caller of 'app_send' locks the app object prior to
	  calling then there's a potential for a deadlock, if another thread calls
	  'app_send' without locking.

	  This patch makes it so 'app_send' is not called with the app object locked in
	  the section of code doing such.

	  ASTERISK-28423 #close

	  Change-Id: I6767c6d0933c7db1b984018966eefca4c0638a27

2020-01-27 11:44 +0000 [dc9875815c]  Kevin Harwell <kharwell@digium.com>

	* res_stasis: trigger cleanup after update

	  The cleanup code in stasis shuts down applications if they are in a deactivated
	  state, and no longer have explicit subscriptions. When registering an app the
	  cleanup code was running before calling 'update'. When it should be executed
	  after 'update' since a call to register may re-activate the app. We don't want
	  it to shutdown before the 'update' otherwise the app won't be re-activated,
	  or registered.

	  This patch makes it so the cleanup code is executed post 'update'.

	  ASTERISK-28679 #close

	  Change-Id: I8f2c0b17e33bb8128441567b97fd4c7bf74a327b

2020-01-27 08:03 +0000 [4bbf24d2ff]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_messaging: Ensure MESSAGE_SEND_STATUS is set properly

	  We need to wait for the message sending callback to finish to know if
	  we succeeded or failed.

	  ASTERISK-25421 #close
	  Reported by:  Dmitriy Serov

	  Change-Id: I22b954398821d2caf4c6fe58f0607c8cfa378059

2020-01-13 04:13 +0000 [ad9a40a539]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Always process updated SDP on media source change

	  Fixes no-audio issues when the media source is changed and
	  strictrtp is enabled (default).

	  If the peer media source changes, the SDP session version also changes.
	  If it is lower than the one we had stored, chan_sip would ignore it.

	  This changeset keeps track of the remote media origin identifier,
	  comparing that as well. If it changes, the session version needn't be
	  higher for us to accept the SDP.

	  Common scenario where this would've caused problems: a separate media
	  gateway that informs the caller about premium rates before handing off
	  the call to the final destination.

	  (An alternative fix would be to set ignoresdpversion=yes on the peer.)

	  ASTERISK-28686

	  Change-Id: I88fdbc5aeb777b583e7738c084254c482a7776ee

2020-01-23 09:06 +0000 [1532da3008]  Sean Bright <sean.bright@gmail.com>

	* chan_pjsip: Ignore RTP that we haven't negotiated

	  If chan_pjsip receives an RTP packet whose payload differs from the
	  channel's native format, and asymmetric_rtp_codec is disabled (the
	  default), Asterisk will switch the channel's native format to match
	  that of the incoming packet without regard to the negotiated payloads.

	  We now check that the received frame is in a format we have negotiated
	  before switching payloads which results in these packets being dropped
	  instead of causing the session to terminate.

	  ASTERISK-28139 #close
	  Reported by: Paul Brooks

	  Change-Id: Icc3b85cee1772026cee5dc1b68459bf9431c14a3

2020-01-16 09:50 +0000 [50d91ad707]  Sean Bright <sean.bright@gmail.com>

	* pjproject_bundled: Allow brackets in via parameters

	  ASTERISK-26955 #close
	  Reported by: Peter Sokolov

	  Change-Id: Ib2803640905a77b65d0cee2d0ed2c7b310d470ac

2020-01-23 16:40 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.8.0-rc1 Released.

2020-01-23 10:12 +0000 [eb1ec0498d]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.8.0
2020-01-22 12:56 +0000 [1b452ebb51]  George Joseph <gjoseph@digium.com>

	* cdr.c: Set event time on party b when leaving a parking bridge

	  When Alice calls Bob and Bob does a blind transfer to Charlie,
	  Bob's bridge leave event generates a finalize on both the party_a
	  and party_b CDRs but while the party_a CDR has the correct end time
	  set from the event time, party_b's leg did not. This caused that
	  CDR's end time to be equal to the answered time and resulted in a
	  billsec of 0.

	  * We now pass the bridge leave message event time to
	  cdr_object_party_b_left_bridge_cb() and set it on that CDR before
	  calling cdr_object_finalize() on it.

	  NOTE:  This issue affected transfers using chan_sip most of the
	  time but also occasionally affected chan_pjsip probably due to
	  message timing.

	  ASTERISK-28677
	  Reported by: Maciej Michno

	  Change-Id: I790720f1e7326f9b8ce8293028743b0ef0fb2cca

2020-01-22 09:39 +0000 [a2a4e1026c]  Sean Bright <sean.bright@gmail.com>

	* http: Add ability to disable /httpstatus URI

	  Add a new configuration option 'enable_status' which allows the
	  /httpstatus URI handler to be administratively disabled.

	  We also no longer unconditionally register the /static and /httpstatus
	  URI handlers, but instead do it based upon configuration.

	  Behavior change: If enable_static was turned off, the URI handler was
	  still installed but returned a 403 when it was accessed. Because we
	  now register/unregister the URI handlers as appropriate, if the
	  /static URI is disabled we will return a 404 instead.

	  Additionally:

	  * Change 'enablestatic' to 'enable_static' but keep the former for
	    backwards compatibility.
	  * Improve some internal variable names

	  ASTERISK-28710 #close

	  Change-Id: I647510f796473793b1d3ce1beb32659813be69e1

2020-01-18 15:54 +0000 [9895e94dba]  Andrew Siplas <andrew@asiplas.net>

	* chan_dahdi: Change 999999 to INT_MAX to better reflect "no timeout"

	  The no-entry timeout set to 999999 == 16⅔ minutes, change to INT_MAX
	  to match behavior of "no timeout" defined in comment.

	  ASTERISK-28702 #close

	  Change-Id: I4ea015986e061374385dba247b272f7aac60bf11

2020-01-20 13:53 +0000 [efecc9d139]  Sean Bright <sean.bright@gmail.com>

	* translate.c: Fix silk 24kHz truncation in 'core show translation'

	  SILK @ 24kHz is not shown in the 'core show translation' output because of an
	  off-by-one-error. Discovered while looking into ASTERISK~19871.

	  ASTERISK-28706
	  Reported by: Sean Bright

	  Change-Id: Ie1a551a8a484e07b45c8699cc0c90f1061029510

2020-01-20 15:26 +0000 [a7aaca9eaa]  Sean Bright <sean.bright@gmail.com>

	* func_odbc.conf.sample: Add example lookup

	  Change-Id: Ia05aab1f579597963d2ea23920d2210cfcb97c84

2020-01-20 11:18 +0000 [04c81f9748]  Sean Bright <sean.bright@gmail.com>

	* res_statsd: Document that res_statsd does nothing on its own

	  ASTERISK-24484 #close
	  Reported by: Dan Jenkins

	  Change-Id: I05f298904511d6739aefb1486b6fcbee27efa9ec

2016-09-30 21:56 +0000 [f49517efb9]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* queue_log: Add alembic script for generate db table for queue_log

	  Change-Id: I35b928a6251f9da9a1742b2cd14c63a00c3d0f0c

2020-01-16 13:47 +0000 [13fa33588f]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail, say: Fix various leading whitespace problems

	  In af90afd90c64c5183c2207d061f9aa15138081b2, Japanese language support
	  was added to app_voicemail and main/say.c, but the leading whitespace
	  is not consistent with Asterisk coding guidelines. This patch fixes
	  that.

	  Whitespace only, no functional change.

	  ASTERISK~23324
	  Reported by: Kevin McCoy

	  Change-Id: I72c725f5930084673749bd7c9cc426a987f08e87

2020-01-16 07:32 +0000 [f5a1e8b04d]  Sean Bright <sean.bright@gmail.com>

	* pbx.c: Include filesystem cache in free memory calculation

	  ASTERISK-28695 #close
	  Reported by: Kevin Flyn

	  Change-Id: Ief098bb6eb77378daeace8f97ba30701c8de55b8

2020-01-16 09:09 +0000 [31027f33db]  Sean Bright <sean.bright@gmail.com>

	* chan_sip.c: Stop handling continuation lines after reading headers

	  lws2sws() does not stop trying to handle header continuation lines
	  even after all headers have been found. This is problematic if the
	  first character of a SIP message body is a space or tab character, so
	  we update to recognize the end of the message header.

	  ASTERISK-28693 #close
	  Reported by: Frank Matano

	  Change-Id: Idec8fa58545cd3fd898cbe0075d76c223f8d33df

2020-01-15 14:29 +0000 [293600724d]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: Prevent crash when saving message with realtime voicemail

	  ast_store_realtime() is not NULL tolerant, so we need to initialize
	  the field values we pass to it to the empty string to avoid a crash.

	  ASTERISK-23739 #close
	  Reported by: Stas Kobzar

	  Change-Id: I756c5dd0299c77f4274368f7c99eb0464367466c

2020-01-14 16:20 +0000 [e379fe48e1]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: Set globals to default values when voicemail.conf missing

	  If voicemail.conf exists but is empty, the config parsing process will
	  default a number of global variables to non-zero values. On the other
	  hand, if voicemail.conf is missing (arguably semantically equivalent
	  to an empty file), this process is skipped and the globals are
	  defaulted to 0.

	  Set the globals to the same values they would be set to if a
	  configuration were present. This allows voicemail configuration to be
	  done completely by Realtime without the need to create an empty
	  voicemail.conf file.

	  ASTERISK-27622 #close
	  Reported by: Jim Van Meggelen

	  Change-Id: Id907d280f310f12e542ca527e6a025432b9fb409

2020-01-11 07:29 +0000 [5fded77e7f]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Deprecate the QueueMemberPause.Reason field

	  The QueueMemberPause AMI event includes two fields that return the
	  reason a member was paused.

	  * In release branches, deprecate Reason in favor of PausedReason.
	  * In master, remove the Reason field entirely.

	  ASTERISK-28349 #close
	  Reported by: Niksa Baldun

	  Change-Id: I01da58f2b0ab927baeee754870f62b51b7b3d296

2020-01-13 16:37 +0000 [fbe18165d5]  Sean Bright <sean.bright@gmail.com>

	* res_realtime: Fix 'realtime update2' argument handling

	  The change in 9b99ef50b5d01ee8111d26efa7b926bdfaf3f980 updated the
	  syntax of the 'realtime update2' CLI command but did not correctly
	  update the calls to ast_update2_realtime().

	  The issue this addresses was originally opened because we aren't
	  allowing a SQL NULL to be set as part of the update, but this is a
	  limitation of the Realtime API and is not a bug.

	  Additionally, this patch:

	  * Corrects the example in the command documentation to reflect
	    'update2' instead of 'update.'

	  * Fixes the leading spacing of the command documentation.

	  * Checks that the required 'NULL' literal argument is present where we
	    expect it to be.

	  ASTERISK-21794 #close
	  Reported by: Cédric Bassaget

	  Change-Id: Idda63a5dc50d5f9bcb34c27ea3238d90f733b2cd

2020-01-10 13:30 +0000 [f69da94fab]  Sean Bright <sean.bright@gmail.com>

	* func_curl: Add 'followlocation' option to CURLOPT()

	  We allow for 'maxredirs' to be set, but this value is ignored when
	  followlocation is not enabled which, by default, it is not.

	  ASTERISK-17491 #close
	  Reported by: candrews

	  Change-Id: I96a4ab0142f2fb7d2e96ff976f6cf7b2982c761a

2020-01-10 15:13 +0000 [8d87fef5a1]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_endpoint_identifier_ip: Document support for hostnames

	  ASTERISK-25429 #close
	  Reported by: Joshua C. Colp

	  Change-Id: I7cdfc6026821636acc2465094b7fcde8471a3824

2020-01-10 14:43 +0000 [0a56edca4d]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_notify: Only allow a single Event header to be added to a NOTIFY

	  ASTERISK-27775 #close
	  Reported by: AvayaXAsterisk

	  Change-Id: Iad158e908e34675ad98f74d09c5e73024e50c257

2019-12-03 12:27 +0000 [b92b0469ff]  Jaco Kroon <jaco@uls.co.za>

	* netsock2: ast_addressfamily_to_sockaddrsize and ast_sockaddr_from_sockaddr.

	  ast_addressfamily_to_sockaddrize will determine the size that's
	  required, and ast_sockaddr_from_sockaddr then wraps this new function
	  and ast_sockaddr_copy_sockaddr to copy arbitrary sockaddr's (without
	  knowing the address family) into the ast_sockaddr structure.

	  Change-Id: Iee604e96e9096c79b477d6e5ff310cf0b06dae86
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2020-01-09 04:37 +0000 [0c07a7ee00]  Corey Farrell <git@cfware.com>

	* app_record: Do not hang up if beep audio is missing

	  Additionally alter the warning to mention that it was "beep" which could
	  not be streamed to give admins a better clue about what the warning
	  means.

	  ASTERISK-28682

	  Change-Id: If5aed21226a173117ed17589f44826dd1ba6576e

2020-01-08 13:54 +0000 [de078debab]  Kevin Harwell <kharwell@digium.com>

	* app_agent_pool: Update XML docs for AgentLogin

	  This patch fixes some wrongly formatted documentation for the AgentLogin
	  application. A couple of "see also" links should contain only the function
	  name, and no parameters.

	  Change-Id: I3f788b47dce3292e311f8a9856938d59a0bd0661

2020-01-08 12:11 +0000 [4cf32f2578]  George Joseph <gjoseph@digium.com>

	* CI: Update buildAsterisk.sh to do a "make full"

	  If you do a "make all" when building Asterisk the xml documentation
	  produced will be missing certain AMI events where their
	  documentation is located not at the top of the c source file but
	  embedded further down next to the event's manager_event()
	  registration call.  See main/manager_mwi.c for an example.

	  "make full" does produce the correct documentation so we're changing
	  it in the build script.  A separate commit/issue will address the
	  problem with "make all".

	  ASTERISK-28507
	  Reported by: David Lee

	  Change-Id: I4a22635d6eef99eacecc0efb69e28360eebdb86c

2020-01-06 09:02 +0000 [8318b05f25]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_pubsub: Add ability to persist generator state information.

	  Some body generators, such as dialog-info+xml, require storing state
	  information which is then conveyed in the NOTIFY request itself. Up
	  until now there was no way for such body generators to persist this
	  information.

	  Two new API calls have been added to allow body generators to set and
	  get persisted data. This data is persisted out alongside the normal
	  persistence information and allows the body generator to restore
	  state information or to simply use this for normal storage of state.
	  State is stored in the form of JSON and it is up to the body
	  generator to interpret this as needed.

	  The dialog-info+xml body generator has been updated to take advantage
	  of this to persist the version number.

	  ASTERISK-27759

	  Change-Id: I5fda56c624fd13c17b3c48e0319b77079e9e27de

2019-12-24 09:16 +0000 [f8b0c2c933]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_endpoint_identifier_ip.c: Add port matching support

	  Adds source port matching support when IP matching is used:

	    [example]
	    type = identify
	    match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444

	  If the IP matches but the source port does not, we reject and search for
	  alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
	  unless the configured FQDN includes a port number in which case just a host
	  lookup is performed.

	  ASTERISK-28639 #close
	  Reported by: Mitch Claborn

	  Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92

2019-12-30 11:04 +0000 [64692a3c72]  George Joseph <gjoseph@digium.com>

	* sig_pri:  Fix deadlock caused by sig_pri_queue_hangup

	  The change to add setting hangupsource to sig_pri_queue_hangup()
	  made in https://gerrit.asterisk.org/c/asterisk/+/12857 casued
	  deadlocks when a hangup request was received from the core at the
	  same time a hanguprequest was received from the remote end via the
	  D channel.

	  Although the PRI's channel private structure was being unlocked
	  before setting the hangupsource, the PRI's own lock was still being
	  held during the process.  If channel actions were also coming from
	  the core, a deadlock on the PRI could result.  This deadlock could
	  then escalate to the entire DAHDI subsystem via DAHDI's global
	  interface list lock, especially if someone used the PRI CLI commands.

	  Fix:

	  * We now unlock the PRI as well as the PRI's channel private
	    structure before setting the hangupsource, then relock both
	    afterwards.

	  ASTERISK-28605
	  Reported by: Dirk Wendland

	  Change-Id: Id74aaa5d4e3746063dbe9deed188eb65193cb9c9

2019-12-30 13:13 +0000 [a7692ce2f4]  Richard Mudgett <rmudgett@digium.com>

	* app_chanisavail.c: Simplify dialplan using ChanIsAvail.

	  Dialplan has to be careful about passing an empty device list or empty
	  positions in the list.  As a result, dialplan has to check for these
	  conditions before using ChanIsAvail.  Simplify dialplan by making
	  ChanIsAvail handle these conditions gracefully.

	  * Made tolerate empty positions in the device list.

	  * Simplified the code and eliminated some unnecessary indention.

	  ASTERISK-28638

	  Change-Id: I9e4b67e2cbf26b2417c2d03485b8568e898931d3

2020-01-02 14:25 +0000 [dd82ebecd3]  George Joseph <gjoseph@digium.com>

	* stasis.c:  Use correct topic name in stasis_topic_pool_delete_topic

	  When a topic is created for an object, its name is only
	  <object>:<uniqueid>
	  For example:
	  bridge:cb68b3a8-fce7-4738-8a17-d7847562f020

	  When a topic is added to a pool, its name has the pool's topic
	  name prepended.  For example:
	  bridge:all/bridge:cb68b3a8-fce7-4738-8a17-d7847562f020

	  The topic_pool_entry's name however, is only what was passed
	  in to stasis_topic_pool_get_topic which is
	  bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
	  That's actually correct because the entry is qualified by the
	  pool that's in.

	  When you're ready to delete the entry from the pool, you retrieve
	  the tropic name from the object but since it now has the pool's
	  topic name prepended, it won't be found in the pool container.

	  Fix:

	  * Modified stasis_topic_pool_delete_topic() to skip past the
	  pool topic's name, if it was prepended to the topic name,
	  before searching the container for a pool entry.

	  ASTERISK-28633
	  Reported by: Joeran Vinzens

	  Change-Id: I4396aa69dd83e4ab84c5b91b39293cfdbcf483e6

2019-12-29 22:38 +0000 [144b774b85]  Richard Mudgett <rmudgett@digium.com>

	* app_dial.c: Simplify dialplan using Dial.

	  Dialplan has to be careful about passing an empty destination list or
	  empty positions in the list.  As a result, dialplan has to check for
	  these conditions before using Dial.  Simplify dialplan by making Dial
	  handle these conditions gracefully.

	  * Made tolerate empty positions in the dialed device list.

	  * Reduced some message log levels from notice to verbose.

	  ASTERISK-28638

	  Change-Id: I6edc731aff451f8bdfaee5498078dd18c3a11ab9

2019-12-29 20:41 +0000 [2780be334d]  Richard Mudgett <rmudgett@digium.com>

	* app_page.c: Simplify dialplan using Page.

	  Dialplan has to be careful about passing an empty destination list or
	  empty positions in the list.  As a result, dialplan has to check for
	  these conditions before using Page.  Simplify dialplan by making Page
	  handle these conditions gracefully.

	  * Made tolerate empty positions in the paged device list.

	  * Reduced some warnings associated with the 's' option to verbose
	  messages.  The warning level for those messages really serves no purpose
	  as that is why the 's' option exists.

	  ASTERISK-28638

	  Change-Id: I95b64a6d6800cd1a25279c88889314ae60fc21e3

2019-12-29 18:36 +0000 [11753d94d8]  Richard Mudgett <rmudgett@digium.com>

	* features.c: Make Bridge application tolerate unspecified channel.

	  The Bridge application was inconsistent if the channel to bridge with is
	  not specified.  If no parameters are given then a warning is issued and
	  the current channel is hung up.  If options are given but no channel is
	  specified then a warning is issued and the current channel is not hung up.

	  * Made the Bridge application give a verbose message instead of a warning
	  if the channel to bridge with is not specified and made not hang up the
	  current channel.  As a result dialplan no longer needs to check if a
	  channel name is passed before calling Bridge and simply needs to check the
	  BRIDGERESULT channel variable instead.  This is something you likely want
	  your dialplan to do anyway.

	  * Fixed up L() option warning message.  It is up to the caller to
	  determine if the channel is hung up because of the warning.  Dial() hangs
	  up the current channel while Bridge() does not.

	  Change-Id: I44349a8dc3912397f28852777de04f19e7bb9c73

2019-12-29 17:48 +0000 [00e745066c]  Richard Mudgett <rmudgett@digium.com>

	* app_chanspy.c: Reduce log message level from notice to verbose.

	  Change-Id: Ica5f38ccd8cdc077aef14d0c50425e0b29ac7e0a

2019-12-29 17:31 +0000 [198f4cbdbf]  Richard Mudgett <rmudgett@digium.com>

	* app_softhangup.c: Reduce unnecessary warning to verbose message.

	  Why log a warning for something your dialplan explicitly asked for?

	  Change-Id: I167b90daf4c7d75dd4b7ef94849f6cef05aa43a7

2020-01-05 10:00 +0000 [992dcdf780]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_config_wizard: Fix change detection for wizard settings

	  ast_sorcery_changeset_create() is not commutative and will fail to detect
	  differences between two variable lists depending on what changed, so switch to
	  ast_variable_lists_match().

	  ASTERISK-28492 #close
	  Reported by: Jean-Denis Girard

	  Change-Id: I7b3256983ddfaa2138d3de92a444a53b5193a4e1

2020-01-03 10:20 +0000 [60fd1322d7]  Sean Bright <sean.bright@gmail.com>

	* res_agi: Improve GET FULL VARIABLE documentation

	  ASTERISK-28673 #close
	  Reported by: Jonathan Harris

	  Change-Id: I591afdec669622bfa19243aabec31b579652c92f

2019-11-26 13:24 +0000 [47ba42f4a0]  Sean Bright <sean.bright@gmail.com>

	* websocket: Consider pending SSL data when waiting for socket input

	  When TLS is in use, checking the readiness of the underlying FD is insufficient
	  for determining if there is data available to be read. So before polling the
	  FD, check if there is any buffered data in the TLS layer and use that first.

	  ASTERISK-28562 #close
	  Reported by: Robert Sutton

	  Change-Id: I95fcb3e2004700d5cf8e5ee04943f0115b15e10d

2019-12-17 18:20 +0000 [b9b50774f5]  snuffy <snuffy22@gmail.com>

	* contrib/valgrind: Fix use of frame-level suppression

	  Fix use of frame-level wildcard usage in suppression file.

	  ASTERISK-27243 #close
	  Reported-by: Richard Kenner

	  Change-Id: I1c0c64c5f305d2c9aa124e11f1f64a2eec52dc51

2019-08-28 05:07 +0000 [e54299cd3e]  Boris P. Korzun <drtr0jan@yandex.ru>

	* func_odbc:  acf_odbc_read() and cli_odbc_read() unicode support

	  Added ast_odbc_ast_str_SQLGetData() considers SQL_DESC_OCTET_LENGTH
	  column attribute for correct allocating the buffer.

	  ASTERISK-28497 #close

	  Change-Id: I50e86c8a277996f13d4a4b9b318ece0d60b279bf

2019-12-03 05:58 +0000 [82a870c8c7]  Jean Aunis <jean.aunis@prescom.fr>

	* chan_sip: voice frames are no longer transmitted after emitting a COLP

	  The SIP transaction state was reset when emitting an UPDATE or a re-INVITE
	  related to a COLP, preventing RTP packets to be emitted.

	  ASTERISK-28647

	  Change-Id: Ie7a30fa7a97f711e7ba6cc17f221a0993d48bd8b

2019-12-27 17:29 +0000 [efa13eb0a0]  Sean Bright <sean.bright@gmail.com>

	* db: Initialize condition primitive before use

	  The db_init() function ultimately calls db_sync() which signals the
	  condition before it is initialized.

	  Change-Id: Id4a4e025b637bc4ac7d90557fcb71d56598892ab

2019-12-18 09:13 +0000 [a78758d0a2]  Sean Bright <sean.bright@gmail.com>

	* config.c: Skip UTF-8 BOMs if present when reading config files

	  ASTERISK-28667 #close

	  Change-Id: I4767ed365c98f3e1587b7653321048a31d8a53b2

2019-12-17 07:38 +0000 [b8e635916f]  Pascal Cadotte Michaud <pcm@wazo.io>

	* sip_to_pjsip.py: Fix trustrpid typo

	  ASTERISK-28664 #close

	  Change-Id: I6c28b1002fd7075ae0ed36f026f8c1855c9418a6

2019-12-16 06:35 +0000 [7167fd6d46]  Joshua C. Colp <jcolp@sangoma.com>

	* configure: Add check for MySQL client bool and my_bool type usage.

	  Instead of trying to use the defined MySQL client version from the
	  header use a configure check to determine whether the bool or my_bool
	  type should be used for defining a boolean.

	  ASTERISK-28604

	  Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7

2019-12-11 18:03 +0000 [5622df0a94]  Joshua C. Colp <jcolp@sangoma.com>

	* confbridge: Add support for specifying maximum sample rate.

	  ConfBridge has the ability to move between different sample
	  rates for mixing the conference bridge. Up until now there has
	  only been the ability to set the conference bridge to mix at
	  a specific sample rate, or to let it move between sample rates
	  as necessary. This change adds the ability to configure a
	  conference bridge with a maximum sample rate so it can move
	  between sample rates but only up to the configured maximum.

	  ASTERISK-28658

	  Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee

2019-12-16 05:23 +0000 [186c4e9b36]  Joshua C. Colp <jcolp@sangoma.com>

	* res_pjsip_session: Set stream state on created streams for incoming SDP.

	  A previous review, 13174, made a change whereby on an incoming offer SDP
	  the pending topology was initialized to the configured. This caused a problem
	  for bundle with WebRTC where bundle could reference a stream that did not
	  actually exist if the configuration had both audio and video but the
	  offer SDP only contained audio.

	  This change undoes that review and instead fixes the original problem it
	  sought to solve by setting the state of created streams based on the
	  contents of the offer SDP. This way the stream state is not inactive
	  until negotiation later completes.

	  ASTERISK-28659

	  Change-Id: Ic5ae5a86437d3e686ac5afd91d133cc916198355

2019-12-13 13:46 +0000 [d17bbcb9f1]  Kevin Harwell <kharwell@digium.com>

	* res_fax: wrap v21 detected Asterisk initiated negotiation with config option

	  A previous patch:

	  Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39

	  made it so a T.38 Gateway tries to negotiate with both sides by sending T.38
	  negotiation request to both endpoints supported T.38 versus the previous
	  behavior of forwarding negotiation to the "other" channel once a preamble
	  was detected.

	  This had the unfortunate side effect of breaking some setups. Specifically
	  ones that set the max datagram option on an endpoint configuration (configured
	  max datagram was not propagated since Asterisk now initiates negotiations).

	  This patch adds a configuration option, "negotiate_both", that when enabled
	  makes it so Asterisk initiates the negotiation requests to both endpoints vs.
	  the previous behavior of waiting, and forwarding the request.

	  The default is disabled keeping with the old behavior.

	  ASTERISK-28660

	  Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a

2019-11-27 11:34 +0000 [aa06c6ea29]  Frederic LE FOLL <frederic.lefoll@c-s.fr>

	* app_chanisavail/cdr: ChanIsAvail sometimes fails to deactivate CDR.

	  Temporary channel lifespan is very short and CDR deactivation request
	  through ast_cdr_set_property() may happen when CDR is not available
	  yet. Use CDR_PROP() dialplan function instead, it will first wait
	  for pending CDR insertion requests to be processed.

	  ASTERISK-28636

	  Change-Id: I1cbe09e8d2169c0962c1195133ff260d291f2074

2019-12-04 02:35 +0000 [77941efad9]  Jaco Kroon <jaco@uls.co.za>

	* ACL: ast_apply_acl_nolog - identical to ast_apply_acl but without logging.

	  Due to use in res_rtp_asterisk there is a need to be able to apply an
	  ACL without logging any invalid/denies.  It's probably sensible to at
	  least validate the ACL once directly after load and report invalid ACLs.

	  Change-Id: I256169229d945ca7c1bbf228fc492d91df345843
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2019-12-11 10:52 +0000 [2d2b28bfa4]  Pascal Cadotte Michaud <pcm@wazo.io>

	* PJSIP_CONTACT: add missing argument documentation

	  add missing argument "rtt" and "status" to the documentation

	  The change to the dtd file allow an enumlist to contain one or many
	  configOptionToEnum or enum.

	  This is different from the previous patch I submitted when you could have a
	  configOptionToEnum or (a configOptionToEnum followed by one or manu enums) or
	  (one or many enums)

	  ASTERISK-28626

	  Change-Id: Ia71743ee7ec813f40297b0ddefeee7909db63b6d

2019-12-04 15:01 +0000 [8af0dea0c7]  George Joseph <gjoseph@digium.com>

	* res_rtp_asterisk:  Add frame list cleanups to ast_rtp_read

	  In Asterisk 16+, there are a few places in ast_rtp_read where we've
	  allocated a frame list but return a null frame instead of the list.
	  In these cases, any frames left in the list won't be freed.  In the
	  vast majority of the cases, the list is empty when we return so
	  there's nothing to free but there have been leaks reported in the
	  wild that can be traced back to frames left in the list before
	  returning.

	  The escape paths now all have logic to free frames left in the
	  list.

	  ASTERISK-28609
	  Reported by: Ted G

	  Change-Id: Ia1d7075857ebd26b47183c44b1aebb0d8f985f7a

2019-12-04 08:35 +0000 [055737d645]  Jaco Kroon <jaco@uls.co.za>

	* chan_sip:  in case of tcp/tls, be less annoying about tx errors.

	  chan_sip.c:3782 __sip_xmit: sip_xmit of 0x7f1478069230 (len 600) to
	  213.150.203.60:1492 returned -2: Interrupted system call

	  returned -2 implies this wasn't actually an OS error, so errno makes no
	  sense either.  Internal error was already logged higher up, and -2
	  generally means that either there isn't a valid connection available, or
	  the pipe notification failed, and that is already correctly logged.

	  ASTERISK-28651 #close

	  Change-Id: I46eb82924beeff9dfd86fa6c7eb87d2651b950f2
	  Signed-off-by: Jaco Kroon <jaco@uls.co.za>

2019-08-25 21:20 +0000 [63b8664bfa]  George Joseph <gjoseph@digium.com>

	* res_pjsip_nat: Restore original contact for REGISTER responses

	  RFC3261 Section 10 "Registrations", specifically paragraph
	  "10.2.4: Refreshing Bindings", states that a user agent compares
	  each contact address (in a 200 REGISTER response) to see if it
	  created the contact.  If the Asterisk endpoint has the
	  rewrite_contact option set however, the contact host and port sent
	  back in the 200 response will be the rewritten one and not the
	  one sent by the user agent.  This prevents the user agent from
	  matching its own contact.  Some user agents get very upset when
	  this happens and will not consider the registration successful.
	  While this is rare, it is acceptable behavior especially if more
	  than 1 user agent is allowed to register to a single endpoint/aor.

	  This commit updates res_pjsip_nat (where rewrite_contact is
	  implemented) to store the original incoming Contact header in
	  a new "x-ast-orig-host" URI parameter before rewriting it, and to
	  restore the original host and port to the Contact headers in the
	  outgoing response.

	  This is only done if the request is a REGISTER and rewrite_contact
	  is enabled.

	  pjsip_message_filter was also updated to ensure that if a request
	  comes in with any existing x-ast-* URI parameters, we remove them
	  so they don't conflict.  Asterisk will never send a request
	  with those headers in it but someone might just decide to add them
	  to a request they craft and send to Asterisk.

	  NOTE: If a device changes its contact address and registers again,
	  it's a NEW registration.  If the device didn't unregister the
	  original registration then all existing behavior based
	  on aor/remove_existing and aor/max_contacts apply.

	  ASTERISK-28502
	  Reported-by: Ross Beer

	  Change-Id: Idc263ad2d2d7bd8faa047e5804d96a5fe1cd282e

2019-11-21 12:48 +0000 [e013f502b1]  Kevin Reeves <kevin@phoneburner.com>

	* main/file.c: Limit media cache usage to remote files.

	  When testing for the existance of a file, the media cache is searched even if
	  the file has no chance of being in it.  This can cause performance issues
	  as the media cache size increases.

	  As a result, calls to applications like Read and Playback using local files
	  must scan through the media cache before playing.  Under load and with a
	  large cache, this can delay the playback of those files.

	  This patch updates the function that checks for the existance of a file to
	  only consult the media cache database if the requested file is a remote path.
	  It introduces a new is_remote_path() function in main/file.c.

	  ASTERISK-28625  #close
	  Reported-by: kevin@phoneburner.com

	  Change-Id: If91137493732d9034dafa381c081c69274a7dcc9

2019-12-12 11:18 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.7.0-rc1 Released.

2019-12-12 05:03 +0000 [9240fcd8bb]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.7.0
2019-12-11 07:01 +0000 [9c29c3fb3e]  Joshua Colp <jcolp@digium.com>

	* Revert "PJSIP_CONTACT: add missing argument documentation"

	  This reverts commit 174e6426aa8a8c26d83c5e06cfbc77277c2f5934.

	  Reason for revert: Regression in XML validation.

	  validity error : Content model of enumlist is not determinist:
	  (configOptionToEnum | (configOptionToEnum , enum+) | enum+)

	  As we are preparing to do releases and this is not critical
	  I am reverting this for now until resolved.

	  Change-Id: I2c9656fb40b2d2f56f54caa35c8be02cc92babd0

2019-12-04 15:26 +0000 [68ce999351]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_registrar.c: Prevent potential double free if AOR is not found

	  The simple fix here is simply to NULL out username and password after we call
	  ast_free on them. Unfortunately, I noticed that we weren't checking for
	  allocation failures for username and password, and adding those checks made
	  things noisy and cumbersome.

	  So instead we partially rollback the recent LGTM patch, and move the alloca
	  calls into find_aor_name().

	  ASTERISK-28641 #close
	  Reported by: Ross Beer

	  Change-Id: Ic9d01624e717a020be0b0aee31f0814e7f1ffbe2

2019-12-04 15:12 +0000 [5c20cc4c3a]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_registrar.c: Prevent possible buffer overflow with domain aliases

	  We're appropriately sizing the id_domain_alias buffer, but then copying the data
	  into the id_domain one. We were then using the uninitialized id_domain_alias
	  buffer we just allocated.

	  This is ASTERISK~28641 adjacent, but significant enough to warrant its own
	  patch.

	  Change-Id: I81c38724d18deab8c6573153e2b99dbb6e2f33d9

2019-12-04 03:33 +0000 [161e762742]  Walter Doekes <walter+asterisk@wjd.nu>

	* app_queue: Fix old confusing comment about when the members are called

	  ASTERISK-28644

	  Change-Id: I2771a931d00a8fc2b9f9a4d1a33ea8f1ad24e06b

2019-12-03 15:42 +0000 [fbc80db350]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_session.c: Prevent use-after-free with TEST_FRAMEWORK enabled

	  We need to copy the endpoint name before we call ao2_cleanup() on it,
	  otherwise we might try to access memory that has been reclaimed.

	  ASTERISK-28445 #close
	  Reported by: Bernhard Schmidt

	  Change-Id: I404b952608aa606e0babd3c4108346721fb726b3

2019-11-22 10:39 +0000 [43d4c0e3c9]  Thomas Arimont (license 5525)

	* channel.c: Resolve issue with receiving SIP INFO packets for DTMF

	  The problem is essentially the same as in ASTERISK~28245. Besides
	  the direct media scenario we have an additional scenario where a
	  special client is involved. This device mutes audio by default in
	  transmit direction (no rtp frames) and activates audio only by a
	  foot switch. In this situation dtmf input (pin for conferences,
	  transfer features codes , etc) using SIP INFO mode is not
	  understood properly especially when SIP INFO messages are sent
	  quickly.

	  This patch ensures that SIP INFO frames are properly queued and
	  processed in the above scenario. The patch also corrects situations
	  where successive dtmf events are received quicker than the
	  signalled event duration (plus minimum gap/pause) allows, i.e. DTMF
	  events have to be buffered in the ast channel read queue and
	  emulation has to be processed asynchronously at slower speed.

	  Reported by: Thomas Arimont
	  patches:
	    trigger_dtmf_emulation.patch submitted by Thomas Arimont (license 5525)

	  Change-Id: I309bf61dd065c9978c8e48f5b9a936ab47de64c2

2019-12-02 06:48 +0000 [80199cd67f]  George Joseph <gjoseph@digium.com>

	* CI: Turn off shallow cloning altogether

	  Change-Id: I73ed4aef33a92f20080128aafc34e19fd4457196

2019-11-27 12:11 +0000 [31173f6586]  Frederic LE FOLL <frederic.lefoll@c-s.fr>

	* chan_sip+native_bridge_rtp: no directmedia for ptime other than default ptime.

	  During capabilities selection (joint capabilities of us and peer,
	  configured capability for this peer, or general configured
	  capabilities), if sip_new() does not keep framing information,
	  then directmedia activation will fail for any framing different
	  from default framing.

	  ASTERISK-28637

	  Change-Id: I99257502788653c2816fc991cac7946453082466

2019-11-25 06:55 +0000 [c91b28c72d]  Joshua Colp <jcolp@digium.com>

	* parking: Fall back to parker channel name even if it matches parkee.

	  ASTERISK-28631

	  Change-Id: Ia74d084799fbb9bee3403e30d2391aacd46243cc

2019-11-22 15:31 +0000 [bd3cb1b300]  Sean Bright <sean.bright@gmail.com>

	* media_cache.c: Various CLI improvements

	  * Use ast_cli_completion_add() to improve performance when large number of
	    cached items are present.

	  * Only complete one URI for commands that only accept a single URI.

	  * Change command documentation to wrap at 80 characters to improve
	    readability.

	  Change-Id: Iedb0a2c3541e49561bc231dca2dcc0ebd8612902

2019-11-21 15:11 +0000 [9eb86a8110]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.6.2
2019-11-15 11:34 +0000 [efef44985d]  Salah Ahmed <txrubel@gmail.com>

	* res_pjsip_t38: T.38 error correction mode selection at 200 ok received

	  if asterisk offer T38 SDP with none error correction scheme and
	  the endpoint respond with redundancy EC scheme, asterisk switch
	  to that mode. Since we configure the endpoint as none EC mode
	  we should not switch to any other mode except none.
	  following logic implemented in code.

	  1. If asterisk offer none, and anything except none in answer
	     will be ignored.
	  2. If asterisk offer fec, answer with fec, redundancy and none will
	     be accepted.
	  3. If asterisk offer redundancy, answer with redundancy and none
	     will be accepted.

	  ASTERISK-28621

	  Change-Id: I343c62253ea4c8b7ee17abbfb377a4d484a14b19

2019-10-21 14:55 +0000 [8cdaa93e65]  Ben Ford <bford@digium.com>

	* chan_sip.c: Prevent address change on unauthenticated SIP request.

	  If the name of a peer is known and a SIP request is sent using that
	  peer's name, the address of the peer will change even if the request
	  fails the authentication challenge. This means that an endpoint can
	  be altered and even rendered unusuable, even if it was in a working
	  state previously. This can only occur when the nat option is set to the
	  default, or auto_force_rport.

	  This change checks the result of authentication first to ensure it is
	  successful before setting the address and the nat option.

	  ASTERISK-28589 #close

	  Change-Id: I581c5ed1da60ca89f590bd70872de2b660de02df

2019-10-24 12:41 +0000 [7574be5110]  George Joseph <gjoseph@digium.com>

	* manager.c:  Prevent the Originate action from running the Originate app

	  If an AMI user without the "system" authorization calls the
	  Originate AMI command with the Originate application,
	  the second Originate could run the "System" command.

	  Action: Originate
	  Channel: Local/1111
	  Application: Originate
	  Data: Local/2222,app,System,touch /tmp/owned

	  If the "system" authorization isn't set, we now block the
	  Originate app as well as the System, Exec, etc. apps.

	  ASTERISK-28580
	  Reported by: Eliel Sardañons

	  Change-Id: Ic4c9dedc34c426f03c8c14fce334a71386d8a5fa

2019-11-21 07:24 +0000 [174e6426aa]  Pascal Cadotte Michaud <pcm@wazo.io>

	* PJSIP_CONTACT: add missing argument documentation

	  add missing argument "rtt" and "status" to the documentation

	  ASTERISK-28626
	  Change-Id: I8419e4c8203e411b87d93dc395acdbcf7526dedf

2019-11-20 12:56 +0000 [3cd57aaff2]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_registration: add support for SRV failover

	  ASTERISK-28624

	  Change-Id: I8da7c300dd985ab7b10dbd5194aff2f737808561

2019-11-19 12:11 +0000 [d075d8913b]  George Joseph <gjoseph@digium.com>

	* CI: Fix missing script block in jenkinsfiles

	  Change-Id: I9f44a3d5085ea7880fad1a3883a4820907e29ea3
	  (cherry picked from commit 95213b01d2d5e72e38b40c30fa5d0c8cf4b37b16)

2019-11-19 11:40 +0000 [ce8a23fdf9]  George Joseph <gjoseph@digium.com>

	* CI: Fix missing script block in jenkinsfiles

	  Change-Id: Ib4b6e4887695f230ea7a5b0c879b29fc5a13be4f
	  (cherry picked from commit d60f23ecbdb748b188da424c92335152941c7673)

2019-11-19 08:51 +0000 [919bc0c7be]  George Joseph <gjoseph@digium.com>

	* CI: Increase clone depth and do better cleanup

	  The original clone depth of 10 was causing the need to rebase
	  changes whose parent was older than the 10 commits.  The clone
	  depth has been increased to 100.

	  Workspace cleanup was only happening for successful builds which
	  wasn't enough to keep the 8G workspace in-memory drives on the
	  docker slaves from filling up.  Now the workspaces are cleaned up
	  after every build regardless of success/failure.  If you need to
	  preserve builds temporarily, you can log into Jenkins/Manage
	  Jenkins/Configure System and change the CLEANUP_WS_* environment
	  variable for the job type you're troubleshooting to "FALSE".

	  Change-Id: I0d7366e87cea714e5dbc9488caf718802fce75ca

2019-11-19 09:31 +0000 [61a3e7e79b]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_registrar: Fix uninitlized variable warning

	  Fixes: error: ‘domain_name’ may be used uninitialized in this function

	  Found with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008

	  Change-Id: I44413b49ea1205aa25538142161deb73883c79e8

2019-11-05 12:16 +0000 [cf5b7f3a0b]  Michael Cargile <mikec@vicidial.com>

	* app_amd: Fixed timeout issue

	  ASTERISK_28143 attempted to fix an issue where calls with no audio would never
	  timeout. It did so by adding AST_FRAME_NULL as a frame type to process in its
	  calculations. Unfortunately these frames seem to show up at irregular time
	  intervals. This resulted in app_amd returning prematurely most of the time.

	  * Removed AST_FRAME_NULL from the calculations
	  * Added a check to see how much time has actually passed since app_amd began

	  ASTERISK-28608

	  Change-Id: I642a21b02d389b17e40ccd5357754b034c3daa42

2019-11-07 11:54 +0000 [faf353e931]  Frederic LE FOLL <frederic.lefoll@c-s.fr>

	* chan_dahdi: PRI span status may stay "Down, Active" after a short alarm

	  Upon a short PRI disconnection, libpri may maintain Q.921 layer 'up' and
	  may thus not send PRI_EVENT_DCHAN_DOWN / PRI_EVENT_DCHAN_UP events.
	  If pri_event_alarm() clears DCHAN_UP status bit upon alarm detection
	  and no Q.921 reconnection sequence occurs, chan_dahdi will keep
	  seeing span status "Down" at the end of alarm.

	  This patch modifies pri_event_alarm() in order to keep DCHAN_UP bit
	  unchanged. libpri will send a PRI_EVENT_DCHAN_DOWN event if it detects
	  a disconnection of Q.921 layer and this will clear DCHAN_UP if required.

	  ASTERISK-28615

	  Change-Id: Ibe27df4971fd4c82cc6850020bce4a8b2692c996

2019-11-07 11:05 +0000 [8894a56452]  lvl <digium@lvlconsultancy.nl>

	* app_senddtmf: Add receive mode to AMI Action PlayDTMF

	  ASTERISK-28614

	  Change-Id: I183501297ae1dc294ae56b34acac9b0343eb2664

2019-11-14 04:19 +0000 [eb54e381fd]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Always return provided DTLS packet length.

	  OpenSSL can not tolerate if the packet sent out does not
	  match the length that it provided to the sender. This change
	  lies and says that each time the full packet was sent. If
	  a problem does occur then a retransmission will occur as
	  appropriate.

	  ASTERISK-28576

	  Change-Id: Id42455b15c9dc4eb987c8c023ece6fbf3c22a449

2019-11-13 14:25 +0000 [e39ddb1cb1]  Sean Bright <sean.bright@gmail.com>

	* func_env: Prevent FILE() from reading garbage at end-of-file

	  If the last line of a file does not have a terminating EOL sequence, we
	  potentially add garbage to the value returned from the FILE() function.

	  There is no overflow potential here as we are reading from a buffer of a
	  known size, we are just reading too much of it.

	  ASTERISK-26481 #close

	  Change-Id: I50dd4fcf416fb3c83150040a1a79a59d9eb1ae01

2019-11-13 17:24 +0000 [3891a953cf]  Kevin Harwell <kharwell@digium.com>

	* bridge_softmix: clear hold when joining a softmix bridge

	  MOH continues to play to a channel if that channel was on hold prior to
	  entering a softmix bridge. MOH will not stop even if the original "holder"
	  attempts an unhold.

	  For the most part a softmix bridge ignores holds, so a participating channel
	  shouldn't join while on hold. This patch checks to see if the channel joining
	  the softmix bridge is currently on hold. If so then it indicates an unhold.

	  ASTERISK-28618

	  Change-Id: I66ccd4efc80f5b4c3dd68186b379eb442916392b

2019-10-23 12:36 +0000 [30c0af7257]  Kevin Harwell <kharwell@digium.com>

	* various files - fix some alerts raised by lgtm code analysis

	  This patch fixes several issues reported by the lgtm code analysis tool:

	  https://lgtm.com/projects/g/asterisk/asterisk

	  Not all reported issues were addressed in this patch. This patch mostly fixes
	  confirmed reported errors, potential problematic code points, and a few other
	  "low hanging" warnings or recommendations found in core supported modules.
	  These include, but are not limited to the following:

	  * innapropriate stack allocation in loops
	  * buffer overflows
	  * variable declaration "hiding" another variable declaration
	  * comparisons results that are always the same
	  * ambiguously signed bit-field members
	  * missing header guards

	  Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25

2019-11-07 11:54 +0000 [37dcdd485a]  Martin Tomec <tomec.martin@gmail.com>

	* func_curl.c: Support custom http headers

	  When user wants to send json data, the default Content-Type header
	  is incorect (application/x-www-form-urlencoded). This patch allows
	  to set any custom headers so the Content-Type header can be
	  overriden. User can set multiple headers by multiple calls of
	  curlopt(). This approach is not consistent with other parameters,
	  but is more readable in dialplan than one call with multiple
	  headers.

	  ASTERISK-28613

	  Change-Id: I4dd68c3f4e25362ef941d73a3861f58348dcfbf9

2019-11-15 04:46 +0000 [b9bbf39449]  Joshua Colp <jcolp@digium.com>

	* parking: Fix case where we can't get the parker.

	  ASTERISK-28616

	  Change-Id: Iabe31ae38d01604284fcc5c2438d44e29a32ea4d

2019-11-12 05:00 +0000 [e7320bbbf0]  Joshua Colp <jcolp@digium.com>

	* parking: Use channel snapshot instead of channel.

	  There exists a scenario where a thread can hold a lock on the
	  channels container while trying to lock a bridge. At the same
	  time another thread can hold the lock for said bridge while
	  attempting to retrieve a channel. This causes a deadlock.

	  This change fixes this scenario by retrieving a channel snapshot
	  instead of a channel, as information present in the snapshot
	  is all that is needed.

	  ASTERISK-28616

	  Change-Id: I68ceb1d62c7378addcd286e21be08a660a7cecf2

2019-11-12 12:36 +0000 [6f0a69c51a]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_session: initialize pending's topology to endpoint's

	  Found during some testing, there is a race condition between selecting an
	  appropriate bridge type for a call versus the applying of media on the callee's
	  session. In some instances a native bridge type would have been chosen, but
	  due to the callee's media not yet being established at bridge compatibility
	  check time the simple bridge type is picked instead.

	  When using chan_pjsip this initiates a topology change event. The topologies
	  are then compared for the two sessions. However, when the topology was created
	  for the caller its streams are initialized to "inactive". This topology is then
	  used as a base when creating the callee's topology, and streams. Soon after
	  the caller's topology's stream(s) get updated based on the sdp (get set to
	  sendrecv in the failing scenario).

	  Now when the topology change event is raised, and the two topologies are
	  compared, the comparison fails due to a stream state mismatch (sendrecv vs
	  inactive). And since they differ a reinvite is sent out (to the caller in
	  this case).

	  This patch makes it such that when the caller's topology is initially created
	  it gets created based on its configured endpoint's media topology. When the
	  endpoint's topology is created its stream's state(s) are initialized to
	  sendrecv instead of inactive. Subsequently, now when the callee's topology is
	  created its topology streams are now initialized to sendrecv. Thus when the
	  topology change event occurs due to the mentioned scenario the stream states
	  match for the given sessions, and the reinvite is not sent unless due to some
	  other valid mismatch.

	  Note, this patch only changes one pending media state's creation point. It's
	  possible other places *could* be changed, however for now it was deemed best
	  to only alter what's here.

	  Change-Id: I6ba3a6a75f64824a1b963044c37acbe951c389c7

2019-11-06 05:47 +0000 [40c49ec64f]  George Joseph <gjoseph@digium.com>

	* stasis: Don't hold app_registry and session locks unnecessarily

	  resource_events:stasis_app_message_handler() was locking the session,
	  then attempting to determine if the app had debug enabled which
	  locked the app_registry container.  res_stasis:__stasis_app_register
	  was locking the app_registry container then calling app_update
	  which caused app_handler (which locks the session) to run.
	  The result was a deadlock.

	  * Updated resource_events:stasis_app_message_handler() to determine
	    if debug was set (which locks the app_registry) before obtaining the
	    session lock.

	  * Updated res_stasis:__stasis_app_register to release the app_registry
	    container lock before calling app_update (which locks the sesison).

	  ASTERISK-28423
	  Reported by Ross Beer

	  Change-Id: I58c69d08cb372852a63933608e4d6c3e456247b4

2019-11-07 10:56 +0000 [6be18dfb72]  Alexei Gradinari <alex2grad@gmail.com>

	* serializer: set high/low alert levels on whole pool

	  The current code sets alert levels starting from index 1.
	  Need to set on whole pool starting from index 0.

	  Change-Id: I5decbb43160954fb9a512f04302637fc666b6f5d

2019-10-29 08:35 +0000 [be4c6f3f35]  George Joseph <gjoseph@digium.com>

	* cdr_mysql:  Fix missing use of 'my_bool' with MySql >= 8.0.1

	  MySql 8.0.1 replaced the "my_bool" type with "bool" so an #if
	  was added to use "bool" with MYSQL_VERSION_ID >= 80001.

	  ASTERISK-28604

	  Change-Id: I66a28d8f0011e33774edee13a6f8efd2302bb920

2019-10-25 06:46 +0000 [95bc698b85]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_outbound_registration: Extend documentation for "max_retries".

	  If the "max_retries" option is set to 0 then upon failure no
	  further attemps are made, so explicitly document the behavior.

	  ASTERISK-28602

	  Change-Id: I1e30daae9dd6c49ce18744164214d3def505acbf

2019-10-24 09:15 +0000 [ccaf735d1f]  Sean Bright <sean.bright@gmail.com>

	* res_calendar: Resolve memory leak on calendar destruction

	  Calling ne_uri_parse allocates memory that needs to be freed with a
	  corresponding call to ne_uri_free.

	  ASTERISK-28572 #close

	  Change-Id: I8a6834da27000a6807d89cb7a157b2a88fcb5e61

2019-10-24 05:21 +0000 [6e22e1213e]  Joshua Colp <jcolp@digium.com>

	* res_ari_events: Add module reference when a WebSocket is open.

	  This change ensures that the module isn't unloaded when a
	  WebSocket is open. Previously it was possible to unload the
	  module manually or during shutdown which could cause a crash
	  when any active WebSockets were terminated.

	  ASTERISK-28585

	  Change-Id: I85c71ab112f99875b586419a34c08c8b34c14c5c

2019-10-18 13:47 +0000 [e627db7928]  Sean Bright <sean.bright@gmail.com>

	* utils.h: Set lower bound for thread stack size to PTHREAD_STACK_MIN

	  ASTERISK-28590 #close

	  Change-Id: I51abce00c04d0a06550bda5205580705185b9c1c

2019-10-18 06:36 +0000 [bfd0e05e59]  George Joseph <gjoseph@digium.com>

	* ExternalMedia:  Change return object from ExternalMedia to Channel

	  When we created the External Media addition to ARI we created an
	  ExternalMedia object to be returned from the channels/externalMedia
	  REST endpoint.  This object contained the channel object that was
	  created plus local_address and local_port attributes (which are
	  also in the Channel variables).  At the time, we thought that
	  creating an ExternalMedia object would give us more flexibility
	  in the future but as we created the sample speech to text
	  application, we discovered that it doesn't work so well with ARI
	  client libraries that a) don't have the ExternalMedia object
	  defined and/or b) can't promote the embedded channel structure
	  to a first-class Channel object.

	  This change causes the channels/externalMedia REST endpoint to
	  return a Channel object (like channels/create and channels/originate)
	  instead of the ExternalMedia object.

	  Change-Id: If280094debd35102cf21e0a31a5e0846fec14af9

2019-10-18 03:13 +0000 [c73aaa2760]  Salah Ahmed <sahmed@voxbone.com>

	* Crash during "pjsip show channelstats" execution

	  During execution "pjsip show channelstats" cli command by an
	  external module asterisk crashed. It seems this is a separate
	  thread running to fetch and print rtp stats. The crash happened on
	  the ao2_lock method, just before it going to read the rtp stats on
	  a rtp instance. According to gdb backtrace log, it seems the
	  session media was already cleaned up at that moment.

	  ASTERISK-28578

	  Change-Id: Ib7c7f39996d942984394782296bb99aae67862e5

2019-10-17 05:50 +0000 [ef2eb064b2]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Remove a log message that slipped in.

	  This was only supposed to be for testing, so now it can be
	  removed.

	  Change-Id: I3dfc2e776e70b3196aeed5688372ea80c0214b59

2019-10-16 16:06 +0000 [2666a5e111]  Sean Bright <sean.bright@gmail.com>

	* README-SERIOUSLY.bestpractices.md: Speling correetions.

	  ASTERISK-28586 #close

	  Change-Id: I43dc4e8bd9dc685b17695b215a5360314074734f

2019-09-26 19:24 +0000 [b41a8fd0f3]  cmaj <chris@penguinpbx.com>

	* app_voicemail.c: Support multiple file formats for forwarded messages.

	  If you specify multiple formats in voicemail.conf, eg. "format = gsm|wav"
	  and are using realtime ODBC backend, only the first format gets stored
	  in the database. So when you forward a message later on, there is a bug
	  generating the email, related to the stored format (GSM) being different
	  than the desired email format (WAV) specified for the user. Sox can
	  handle this, but Asterisk needs to tell sox exactly what to do.

	  ASTERISK-22192

	  Change-Id: I7321e7f7e7c58adbf41dd4fd7191c887b9b2eafd

2019-10-14 06:19 +0000 [ed12715cbe]  Joshua Colp <jcolp@digium.com>

	* test_res_rtp: Enable FIR and REMB nominal tests.

	  Now that both FIR and REMB are being sent in compound packets
	  these tests can be enabled.

	  This also extends the REMB nominal test to cover the REMB
	  contents itself.

	  Change-Id: Ibfee526ad780eefcce5dd787f53785382210024a

2019-10-08 13:40 +0000 [6c54bd704e]  Christoph Moench-Tegeder <cmt@burggraben.net>

	* cdr_pgsql cel_pgsql res_config_pgsql: compatibility with PostgreSQL 12

	  PostgreSQL 12 finally removed column adsrc from table pg_catalog.pg_attrdef
	  (column default values), which has been deprecated since version 8.0.
	  Since then, the official/correct/supported way to retrieve the column
	  default value from the catalog is function pg_catalog.pg_get_expr().

	  This change breaks compatibility with pre-8.0 PostgreSQL servers,
	  but has reached end-of-support more than a decade ago.
	  cdr_pgsql and res_config_pgsql still have support for pre-7.3
	  servers, but cleaning that up is perhaps a topic for a major release,
	  not this bugfix.

	  ASTERISK-28571

	  Change-Id: I834cb3addf1937e19e87ede140bdd16cea531ebe

2019-10-10 15:30 +0000 [17e71b6abe]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_mwi: potential double unref, and potential unwanted double link

	  When creating an unsolicited MWI aggregate subscription it was possible for
	  the subscription object to be double unref'ed. This patch removes the explicit
	  unref as it is not needed since the RAII_VAR will handle it at function end.

	  Less concerning there was also a bug that could potentially allow the aggregate
	  subscription object to be added to the unsolicited container twice. This patch
	  ensures it is added only once.

	  ASTERISK-28575

	  Change-Id: I9ccfdb5ea788bc0c3618db183aae235e53c12763

2019-10-09 16:00 +0000 [867c8b2879]  Chris Savinovich <csavinovich@digium.com>

	* test_taskprocessor.c: Fix test failure on Ubuntu

	  Fixes a failure in /main/taskprocesor unit test, only occurring in Ubuntu.
	  Newer versions of GCC require variable initialization.

	  Change-Id: I2994d8aab9307a8c2c7330584f287a27144a580c

2019-10-09 09:32 +0000 [cb6e0d36ae]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Replace earlier reverts with official fixes.

	  Issues in pjproject 2.9 caused us to revert some of their changes
	  as a work around.  This introduced another issue where pjproject
	  wouldn't build with older gcc versions such as that found on
	  CentOS 6.  This commit replaces the reverts with the official
	  fixes for the original issues and allows pjproject to be built
	  on CentOS 6 again.

	  ASTERISK-28574
	  Reported-by: Niklas Larsson

	  Change-Id: I06f8507bea553d1a01b0b8874197d35b9d47ec4c

2019-10-09 15:17 +0000 [a66848c92f]  Joshua Colp (license 5000)

	* pbx: deadlock when outgoing dialed channel hangs up too quickly

	  Here's the basic scenario that occurred when executing an AMI fast originate
	  while at the same time something else locks the channels container, and also
	  wants a lock on the dialed channel:

	  1. pbx_outgoing_attempt obtains a lock on a dialed channel
	  2. concurrently another thread obtains a lock on the channels container, and
	     subsequently requests a lock on the dialed channel. It waits on #1. For
	     instance, "core show channel <dialed channel"
	  3. the outgoing call does not fail, but ends before the pbx_outgoing_attempt
	     function exits
	  4. pbx_outgoing_attempt function exits, the outgoing structure destructs, and
	     attempts to hang up the dialed channel
	  5. hang up tries to obtain the channels container lock, but can't due to #2.
	  6. Asterisk is deadlocked.

	  The solution was to allow the pbx_outgoing_exec function to "steal" ownership
	  of the dialed channel, and handle hanging it up. The channel now is either hung
	  up prior to it being potentially locked by the initiating thread, or if locked
	  the hang up takes place in a different thread, thus alleviating the deadlock.

	  ASTERISK-28561
	  patches:
	    iliketrains.diff submitted by Joshua Colp (license 5000)

	  Change-Id: I51b42b92dde8f2215b69bb509e28667ee3a3853a

2019-10-07 14:02 +0000 [68855f6a7b]  Sean Bright <sean.bright@gmail.com>

	* Revert "app_voicemail: Cleanup stale lock files on module load"

	  This reverts commit fd2e8d0da7ba539470ed73d463d8bc641f7843af.

	  Reason for revert: Problematic for users who store their voicemail
	  on network storage devices, or share voicemail storage between
	  multiple Asterisk instances.

	  ASTERISK-28567 #close

	  Change-Id: I3ff4ca983d8e753fe2971f3439bd154705693c41

2019-10-02 11:37 +0000 [3f12cd7711]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_mwi: use an ao2_global object for mwi containers

	  On shutdown it's possible for the unsolicited mwi container to be freed before
	  other dependent threads are done using it. This patch ensures this can no
	  longer happen by wrapping the container in an ao2_global object. The solicited
	  container was also changed too.

	  ASTERISK-28552

	  Change-Id: I8f812286dc19a34916acacd71ce2ec26e1042047

2019-10-02 11:24 +0000 [afc10c25ac]  Kevin Harwell <kharwell@digium.com>

	* serializer: move/add asterisk serializer pool functionality

	  Serializer pools have previously existed in Asterisk. However, for the most
	  part the code has been duplicated across modules. This patch abstracts the
	  code into an 'ast_serializer_pool' object. As well the code is now centralized
	  in serializer.c/h.

	  In addition serializer pools can now optionally be monitored by a shutdown
	  group. This will prevent the pool from being destroyed until all serializers
	  have completed.

	  Change-Id: Ib1e906144b90ffd4d5ed9826f0b719ca9c6d2971

2019-10-02 11:34 +0000 [931ef77e21]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip/res_pjsip_mwi: use centralized serializer pools

	  Both res_pjsip and res_pjsip_mwi made use of serializer pools. However, they
	  both implemented their own serializer pool functionality that was pretty much
	  identical in each of the source files. This patch removes the duplicated code,
	  and uses the new 'ast_serializer_pool' object instead.

	  Additionally res_pjsip_mwi enables a shutdown group on the pool since if the
	  timing was right the module could be unloaded while taskprocessor threads still
	  needed to execute, thus causing a crash.

	  Change-Id: I959b0805ad024585bbb6276593118be34fbf6e1d

2019-10-04 15:31 +0000 [495bc77a6a]  Sean Bright <sean.bright@gmail.com>

	* cdr_mysql: Don't clean up on unload unless we can unregister from CDRs

	  ASTERISK-28566 #close

	  Change-Id: I6daa4e5128e9406d04d3aed670c3bae98d38d40c

2019-10-01 09:01 +0000 [ce1e0714ba]  Joshua Colp <jcolp@digium.com>

	* stasis: Pass bumped topic_all reference to proxy_dtor.

	  This avoids use of the global variable and ensures topic_all remains
	  active until all topics are freed.

	  ASTERISK-28553
	  patches:
	    ASTERISK-28553.patch by coreyfarrell (license 5909)

	  Change-Id: I9a8cd8977f3c3a6aa00783f8336d2cfb9c2820f1

2019-10-01 06:29 +0000 [19565e0b90]  lvl <digium@lvlconsultancy.nl>

	* chan_pjsip: Prevent segfault when running PlayDTMF on hungup channel

	  ASTERISK-28086 #close

	  Change-Id: Ib3baadc89b9f0477a6f25a63861433812368c5ea

2019-09-19 03:56 +0000 [9a933c3adc]  Torrey Searle <torrey@voxbone.com>

	* channel/chan_pjsip: add dialplan function for music on hold

	  Add a new dialplan function PJSIP_MOH_PASSTHROUGH that allows
	  the on-hold behavior to be controlled on a per-call basis

	  ASTERISK-28542 #close

	  Change-Id: Iebe905b2ad6dbaa87ab330267147180b05a3c3a8

2019-09-27 09:54 +0000 [1f10ca76da]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_transport_websocket: Don't put brackets around local_name if IPv6

	  ASTERISK-28544 #close

	  Change-Id: I8e62c444d107674c298f472e3545661de8a80dce

2019-09-24 14:18 +0000 [04f7d136d8]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_pubsub: add endpoint to some warning

	  There are some warning messages which are not informative without endpoint:
	  "No registered subscribe handler for event presence.winfo"
	  "No registered publish handler for event presence"

	  This patch adds an endpoint name to these messages.

	  Change-Id: Ia2811ec226d8a12659b4f9d4d224b48289650827

2019-09-26 10:35 +0000 [d146ec7e83]  Asterisk Team <root@DIGIUM1.digium.internal>

	* Revert "Update CHANGES and UPGRADE.txt for 16.6.0-rc2"

	  This reverts commit a0844a9b9bbe313c524bca82550e7ec1ed2fe928.

	  Correcting/reverting accidental
	  upgrade on release process.

	  Change-Id: I08746eda578effa6e64054690fad48a17d2f42e7

2015-03-27 17:34 +0000 [85c7326d08]  Jonathan Rose <jrose@digium.com>

	* basic-pbx: Bring forward queue configuration from 13

	  Original commit: cfbf5fbe918bc34f3d600760fc0b6f13a3a9a0ed

	  Change-Id: I34a841d73c429ca8d944481f8dccb756ee231c9c

2019-09-25 11:01 +0000 [0514559005]  Sean Bright <sean.bright@gmail.com>

	* pbx: Prevent Realtime switch crash on invalid priority

	  pbx_extension_helper takes two 'context' arguments. One (con) is a
	  pointer directly to a 'struct ast_context' and the other (context) is
	  the name of the context. In all cases, one of these arguments is NULL
	  and the other is non-NULL.

	  Functions that are ultimately called by pbx_extension_helper expect that
	  'context' will be non-NULL, so we set it unconditionally on entry into
	  this function.

	  ASTERISK-28534 #close

	  Change-Id: Ifbbc5e71440afd80efd441f7a9d72e8b10b6f47d

2019-09-24 15:44 +0000 [827dd754b2]  Ben Ford <bford@digium.com>

	* taskprocessor.c: Added "like" support to 'core show taskprocessors'

	  Added "like" support for 'core show taskprocessors'. Now you
	  can specify a specific set of taskprocessors (or just one) by
	  adding the keyword "like" to the above command, followed by
	  your search criteria.

	  Change-Id: I021e740201e9ba487204b5451e46feb0e3222464

2019-09-25 12:53 +0000 [a0844a9b9b]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.6.0-rc2
2019-09-24 17:43 +0000 [41cd1ff454]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_registrar: Validate Contact URI before adding to responses

	  If a permanent contact URI associated with an AOR is invalid, we add a
	  Contact header to REGISTER responses with a NULL URI, causing a crash.

	  ASTERISK-28463 #close

	  Change-Id: Id2b643e58b975bc560aab1c111e6669d54db9102

2019-09-24 11:21 +0000 [9ff11c2f00]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_pubsub: change warning to debug

	  The following message:

	  "Subscription request from endpoint <blah> rejected. Expiration of 0 is invalid"

	  Would sometimes spam the log with warnings if Asterisk restarted and a bunch
	  of clients sent unsubscribes. This patch changes it from a warning to a debug
	  message.

	  Change-Id: I841ec42f65559f3135e037df0e55f89b6447a467

2019-09-22 21:04 +0000 [cd51f5b876]  Corey Farrell <git@cfware.com>

	* core: Fix ABI mismatch of ao2_global_obj.

	  astobj2.c declares DEBUG_THREADS_LOOSE_ABI to avoid overhead of debug
	  threads tracking information in the internal structures of astobj2.
	  Unfortunately this means that ao2_global_obj contains the statically
	  allocated debug threads tracking fields which are used by initialization
	  and cleanup but main/astobj2.c believed those fields and associated
	  space did not exist.

	  Change-Id: Icef41ad97d88a8c1d1515e034ec8133cab3b1527

2019-09-24 09:40 +0000 [5ea667e03a]  Ben Ford <bford@digium.com>

	* taskprocessor.c: Add CLI commands to reset taskprocessor stats.

	  Added two new CLI commands to reset stats for taskprocessors. You can
	  reset stats for a single, specific taskprocessor ('core reset
	  taskprocessor <taskprocessor>'), or you can reset all taskprocessors
	  ('core reset taskprocessors'). These commands will reset the counter for
	  the number of tasks processed as well as the max queue size.

	  Change-Id: Iaf17fc4ae29396ab0c6ac92408fc7bdc2f12362d

2019-09-19 09:50 +0000 [789c51ac8a]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Revert pjproject 2.9 commits causing leaks

	  We've found a connection re-use regression in pjproject 2.9
	  introduced by commit
	  "Close #1019: Support for multiple listeners."
	  https://trac.pjsip.org/repos/changeset/6002
	  https://trac.pjsip.org/repos/ticket/1019

	  Normally, multiple SSL requests should reuse the same connection
	  if one already exists to the remote server.  When a transport
	  error occurs, the next request should establish a new connection
	  and any following requests should use that same one.  With this
	  patch, when a transport error occurs, every new request creates
	  a new connection so you can wind up with thousands of open tcp
	  sockets, possibly exhausting file handles, and increasing memory
	  usage.

	  Reverting pjproject commit 6002 (and related 6021) restores the
	  expected behavior.

	  We also found a memory leak in SSL processing that was introduced by
	  commit
	  "Fixed #2204: Add OpenSSL remote certificate chain info"
	  https://trac.pjsip.org/repos/changeset/6014
	  https://trac.pjsip.org/repos/ticket/2204

	  Apparently the remote certificate chain is continually recreated
	  causing the leak.

	  Reverting pjproject commit 6014 (and related 6022) restores the
	  expected behavior.

	  Both of these issues have been acknowledged by Teluu.

	  ASTERISK-28521

	  Change-Id: I8ae7233c3ac4ec29a3b991f738e655dabcaba9f1

2019-09-22 16:59 +0000 [fec6e1bd87]  Corey Farrell <git@cfware.com>

	* core: Add AO2_ALLOC_OPT_NO_REF_DEBUG option.

	  Previous to this patch passing a NULL tag to ao2_alloc or ao2_ref based
	  functions would result in the reference not being logged under
	  REF_DEBUG.  This could sometimes cause inaccurate logging if NULL was
	  accidentally passed to a reference action.  Now reference logging is
	  only disabled by option passed to the allocation method.

	  Change-Id: I3c17d867d901d53f9fcd512bef4d52e342637b54

2019-09-23 11:01 +0000 [bd96a0b79d]  Kevin Harwell <kharwell@digium.com>

	* res_sorcery_memory_cache: stale item update leak

	  When a stale item was being updated the object was being retrieved, but its
	  reference was not being decremented after the update. This patch makes it so
	  the object is now appropriately de-referenced.

	  ASTERISK-28523

	  Change-Id: I9d8173d3a0416a242f4eba92fa0853279c500ec7

2019-09-23 07:09 +0000 [9c5a8066a6]  George Joseph <gjoseph@digium.com>

	* astmm.c:  Display backtrace with memory show allocations

	  You can currently capture backtraces of memory allocations but they
	  only get displayed when you stop asterisk and the atexit hooks
	  are enabled.  Now, if memory backtrace is on and you issue a
	  "memory show allocations" CLI command for a specific file, then
	  a backtrace will show for each allocation that occurred after
	  you turned "memory backtrace on".  The backtrace display is shown
	  only when a specific file's allocations are displayed to prevent
	  a massive CLI dump of every file's allocations.

	  Change-Id: Ic657afc1fc6ec7205e16eb36a97a611d235a2b4f

2019-09-20 08:29 +0000 [5b8c1ed0d3]  Corey Farrell <git@cfware.com>

	* stasis: refcounter.py can incorrectly report skewed objects.

	  It is possible for topic->name to be NULL, this causes the allocation
	  reference to not be logged.  Use the name variable instead which has
	  been verified to be a non-empty.

	  Change-Id: I3d0031d03c8356e4808f00cdf2d5428712575883

2019-09-19 11:06 +0000 [76d4a42ae1]  Corey Farrell <git@cfware.com>

	* res_pjsip_mwi: Remove inappropriate topic unreference.

	  ast_mwi_topic() returns a borrowed reference which should not be
	  unreferenced, doing so leads to a FRACK.  This was hidden by the fact
	  that stasis_cache.c leaked the result of cache_remove in
	  caching_topic_exec.

	  Change-Id: I51101bf7d07b8dc8ce8fc46b6cb31fbbd213fbc7

2019-09-19 10:53 +0000 [256db889f2]  Corey Farrell <git@cfware.com>

	* app_voicemail: Fix module unload leak.

	  Change-Id: Ib9a06565b9a178822d3bbb67eccf51432e12d84a

2019-09-06 08:18 +0000 [6647be69ac]  Joshua Colp <jcolp@digium.com>

	* func_jitterbuffer: Add audio/video sync support.

	  This change adds support to the JITTERBUFFER dialplan function
	  for audio and video synchronization. When enabled the RTCP SR
	  report is used to produce an NTP timestamp for both the audio and
	  video streams. Using this information the video frames are queued
	  until their NTP timestamp is equal to or behind the NTP timestamp
	  of the audio. The audio jitterbuffer acts as the leader deciding
	  when to shrink/grow the jitterbuffer when adaptive is in use. For
	  both adaptive and fixed the video buffer follows the size of the
	  audio jitterbuffer.

	  ASTERISK-28533

	  Change-Id: I3fd75160426465e6d46bb2e198c07b9d314a4492

2019-09-18 06:56 +0000 [9f304170f6]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Add new 'playlist' mode

	  Allow the list of files to be played to be provided explicitly in the
	  music class's configuration. The primary driver for this change is to
	  allow URLs to be used for MoH.

	  Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa

2019-09-15 14:35 +0000 [49e1346185]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Relock correct channel during "fax" redirect.

	  When fax detection occurs on an outbound PJSIP channel the
	  redirect operation will result in a masquerade occurring and
	  the underlying channel on the session changing. The code
	  incorrectly relocked the new channel instead of the old
	  channel when returning. This resulted in the new channel
	  being locked indefinitely. The code now always acts on the
	  expected channel.

	  ASTERISK-28538

	  Change-Id: I2b2e60d07e74383ae7e90d752c036c4b02d6b3a3

2019-09-14 10:05 +0000 [448b8c9bc2]  Guido Falsi <madpilot@FreeBSD.org>

	* chan_dahdi: Fix build with clang/llvm

	  On FreeBSD using the clang/llvm compiler build fails to build due
	  to the switch statement argument being a non integer type expression.
	  Switch to an if/else if/else construct to sidestep the issue.

	  ASTERISK-28536 #close

	  Change-Id: Idf4a82cc1e94580a2d017fe9e351c226f23e20c8

2019-09-03 12:20 +0000 [a95cef7140]  Ben Ford <bford@digium.com>

	* res_rtp_asterisk.c: Send RTCP as compound packets.

	  According to RFC3550, ALL RTCP packets must be sent in a compond packet
	  of at least two individual packets, including SR/RR and SDES. REMB,
	  FIR, and NACK were not following this format, and as a result, would
	  fail the packet check in ast_rtcp_interpret. This was found from writing
	  unit tests for RTCP. The browser would accept the way we were
	  constructing these RTCP packets, but when sending directly from one
	  Asterisk instance to another, the above mentioned problem would occur.

	  Change-Id: Ieb140e9c22568a251a564cd953dd22cd33244605

2019-09-11 15:58 +0000 [518b6bfb5c]  Michael Goryainov

	* channels: Allow updating variable value

	  When modifying an already defined variable in some channel drivers they
	  add a new variable with the same name to the list, but that value is
	  never used, only the first one found.

	  Introduce ast_variable_list_replace() and use it where appropriate.

	  ASTERISK-23756 #close
	  Patches:
	    setvar-multiplie.patch submitted by Michael Goryainov

	  Change-Id: Ie1897a96c82b8945e752733612ee963686f32839

2019-08-22 07:44 +0000 [f85631cf82]  Florian Floimair <f.floimair@commend.com>

	* core: Add H.265/HEVC passthrough support

	  This change adds H.265/HEVC as a known codec and creates a cached
	  "h265" media format for use.

	  Note that RFC 7798 section 7.2 also describes additional SDP
	  parameters. Handling of these is not yet supported.

	  ASTERISK-28512

	  Change-Id: I26d262cc4110b4f7e99348a3ddc53bad0d2cd1f2

2019-08-28 14:25 +0000 [922d3e02df]  Ben Ford <bford@digium.com>

	* res_rtp: Add unit tests for RTCP stats.

	  Added unit tests for RTCP video stats. These tests include NACK, REMB,
	  FIR/FUR/PLI, SR/RR/SDES, and packet loss statistics. The REMB and FIR
	  tests are currently disabled due to a bug. We expect to receive a
	  compound packet, but the code sends this out as a single packet, which
	  the browser accepts, but makes Asterisk upset.

	  While writing these tests, I noticed an issue with NACK as well. Where
	  it is handling a received NACK request, it was reading in only the first
	  8 bits of following packets that were also lost. This has been changed
	  to the correct value of 16 bits.

	  Also made a minor fix to the data buffer unit test.

	  Change-Id: I56107c7411003a247589bbb6086d25c54719901b

2019-09-12 21:08 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.6.0-rc1 Released.

2019-09-12 16:04 +0000 [688908fe7a]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.6.0
2019-08-27 17:44 +0000 [b478f46d59]  sungtae kim <pchero21@gmail.com>

	* res_musiconhold: Added unregister realtime moh class

	  This fix allows a realtime moh class to be unregistered from the command
	  line. This is useful when the contents of a directory referenced by a
	  realtime moh class have changed.
	  The realtime moh class is then reloaded on the next request and uses the
	  new directory contents.

	  ASTERISK-17808

	  Change-Id: Ibc4c6834592257c4bb90601ee299682d15befbce

2019-08-05 06:59 +0000 [d566314e38]  George Joseph <gjoseph@digium.com>

	* ARI: External Media

	  The Channel resource has a new sub-resource "externalMedia".
	  This allows an application to create a channel for the sole purpose
	  of exchanging media with an external server.  Once created, this
	  channel could be placed into a bridge with existing channels to
	  allow the external server to inject audio into the bridge or
	  receive audio from the bridge.
	  See https://wiki.asterisk.org/wiki/display/AST/External+Media+and+ARI
	  for more information.

	  Change-Id: I9618899198880b4c650354581b50c0401b58bc46

2019-09-08 10:38 +0000 [bf527810ef]  Sean Bright <sean.bright@gmail.com>

	* codec_resample: Ensure OUTSIDE_SPEEX is defined when necessary

	  ASTERISK-28511

	  Change-Id: If0d58598ce14aad3c786a1c0127b5f7b200b737d

2019-09-05 10:52 +0000 [c6b17b5212]  Frederic LE FOLL <frederic.lefoll@c-s.fr>

	* chan_dahdi: set CHANNEL(hangupsource) when a PRI channel hangs up

	  When the remote ISDN party ends an ISDN call on a PRI link
	  (DISCONNECT), CHANNEL(hangupsource) information is not available.

	  chan_dahdi already contains an ast_set_hangupsource() in
	  __dahdi_exception() function but it seems that ISDN message processing
	  does not use this part of code.

	  Two other channel modules associate ast_queue_hangup() and
	  ast_set_hangupsource() functions calls:
	  - chan_pjsip in chan_pjsip_session_end() function,
	  - chan_sip in sip_queue_hangup_cause() function.
	  chan_iax2 separates them, in iax2_queue_hangup()/iax2_destroy() and
	  set_hangup_source_and_cause().

	  Thus, I propose to add ast_set_hangupsource() beside
	  ast_queue_hangup() in sig_pri_queue_hangup(), like chan_pjsip and
	  chan_sip already do.

	  ASTERISK-28525

	  Change-Id: I0f588a4bcf15ccd0648fd69830d1b801c3f21b7c

2019-09-05 11:09 +0000 [c8cf3ad389]  Frederic LE FOLL <frederic.lefoll@c-s.fr>

	* ChanIsAvail() generates a CDR when unanswered=yes in cdr.conf.

	  ChanIsAvail() creates a temporary channel with ast_request() to test
	  resource availability. It should not generate a CDR when it hangs up
	  this temporary channel.

	  This patch disables CDR generation for the temporary channel with
	  ast_cdr_set_property().

	  ASTERISK-28527

	  Change-Id: I7b0555c6909c7d322e452dde97c9ea5b111552d1

2019-08-26 07:53 +0000 [2691ee7e10]  Joshua Colp <jcolp@digium.com>

	* AST-2019-005 - translate: Don't assume all frames will have a src.

	  This change removes the assumption that a frame will always have
	  a src set on it. This assumption is incorrect.

	  Given a scenario where an RTP packet is received with no payload
	  the resulting audio frame will have no samples. If this frame goes
	  through a signed linear translation path an interpolated frame can
	  be created (if generic packet loss concealment is enabled) that has
	  minimal data on it, including no src. If this frame is given to a
	  translation path a crash will occur due to the lack of src.

	  ASTERISK-28499

	  Change-Id: I024d10dd98207eb8a6b35b59880bcdf1090538f8

2019-08-20 15:05 +0000 [965df3c228]  Alexei Gradinari <alex2grad@gmail.com> (license 5691)

	* AST-2019-004 - res_pjsip_t38.c: Add NULL checks before using session media

	  After receiving a 200 OK with a declined stream in response to a T.38
	  initiated re-invite Asterisk would crash when attempting to dereference
	  a NULL session media object.

	  This patch checks to make sure the session media object is not NULL before
	  attempting to use it.

	  ASTERISK-28495
	  patches:
	    ast-2019-004.patch submitted by Alexei Gradinari (license 5691)

	  Change-Id: I168f45f4da29cfe739acf87e597baa2aae7aa572

2019-09-04 16:19 +0000 [a321225fa4]  Chris-Savinovich <csavinovich@digium.com>

	* test_utils.c: Skip test adsi_loaded_test if module not loaded.

	  Module res_adsi.so is deprecated, therefore it does not load by default.
	  Module not loaded causes it to yield a FAIL when tested by tests/test_utils.c.
	  This fix checks if the corresponding module is loaded at the start of the test,
	  and if not, it passes the test and exits with a message.

	  This fix is applied to all versions where the module is marked deprecated.

	  Change-Id: I52be64c8f6af222e15148a856d1f10cb113e1e94

2019-08-27 06:10 +0000 [92261d60c8]  Igor Goncharovsky <igor.goncharovsky@gmail.com>

	* chan_unistim: Fix clang warning: variable sized type not at end of a struct

	  On reading information about initial client packet unistim use dirty
	  implementation of destination ip address retrieval. This fix uses
	  CMSG_*(..) to get ip address and make clang compile without warning.

	  ASTERISK-25592 #close
	  Reported-by: Alexander Traud

	  Change-Id: Ic1fd34c2c2bcc951da65bf62e3f7a8adff8351b1

2019-08-23 16:24 +0000 [7db5f5df6a]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_mwi: add better handling of solicited vs unsolicited subscriptions

	  res_pjsip_mwi allows both solicited and unsolicited MWI subscription types.
	  While both can be set in the configuration for a given endpoint/aor, only
	  one is allowed. Precedence is given to unsolicited. Meaning if an endpoint/aor
	  is configured to allow both types then the solicited subscription is rejected
	  when it comes in. However, there is a configuration option to override that
	  behavior:

	  mwi_subscribe_replaces_unsolicited

	  When set to "yes" then when a solicited subscription comes in instead of
	  rejecting it Asterisk is suppose to replace the unsolicited one if it exists.
	  Prior to this patch there was a bug in Asterisk that allowed the solicted one
	  to be added, but did not remove the unsolicited. As a matter of fact a new
	  unsolicited subscription got added everytime a SIP register was received.
	  Over time this eventually could "flood" a phone with SIP notifies.

	  This patch fixes that behavior to now make it work as expected. If configured
	  to do so a solicited subscription now properly replaces the unsolicited one.
	  As well when an unsubscribe is received the unsolicited subscription is
	  restored. Logic was also put in to handle reloads, and any configuration changes
	  that might result from that. For instance, if a solicited subscription had
	  previously replaced an unsolicited one, but after reload it was configured to
	  not allow that then the solicited one needs to be shutdown, and the unsolicited
	  one added.

	  ASTERISK-28488

	  Change-Id: Iec2ec12d9431097e97ed5f37119963aee41af7b1

2019-08-27 00:49 +0000 [78d00c277c]  Igor Goncharovsky <igor.goncharovsky@gmail.com>

	* chan_unistim: Fix code, causing all incoming DTMF sent back to asterisk

	  Current implementation of ast_channel_tech send_digit_begin hook uses
	  same function for tone playback as key press handler. This cause every
	  incoming dtmf send back to asterisk. In case of two unistim phones
	  connected to each other, it'll cause indefinite DTMF loop. Fix add
	  separate function for dtmf tone phone play.

	  Change-Id: I5795db468df552f0c89c7576b6b3858b26c4eab4

2019-08-16 06:01 +0000 [821b7561f8]  Igor Goncharovsky <igor.goncharovsky@gmail.com>

	* chan_unistim: Fix RTP port byte order for big-endian arch

	  This patch fixes one-way oudio that users expirienced on
	  big-endian architechtires. RTP port number bytes was stored
	  in improper order and phone sent RTP to wrong RTP port.

	  Reported-by: Andrey Ionov
	  Change-Id: I9a9ca7f26e31a67bbbceff12923baa10dfb8a3be

2019-08-23 15:14 +0000 [cdbb9800e3]  Sean Bright <sean.bright@gmail.com>

	* codec_resample: Upgrade speex_resample to fix up-sampling bug

	  ASTERISK-28511 #close

	  Change-Id: Idd07bf341e89ac999c7f5701d9b72b8a9cb11e82

2019-08-22 13:19 +0000 [aaaa1695ca]  Alexei Gradinari <alex2grad@gmail.com>

	* Fix misname 'res_external_mwi' to 'res_mwi_external' in comments.

	  Change-Id: Ic784be8500e5cb75dcb34bae9f03cfd93b6b34fb

2019-08-21 13:29 +0000 [c00a010fe8]  George Joseph <gjoseph@digium.com>

	* chan_rtp:  Accept hostname as well as ip address as destination

	  The UnicastRTP channel driver provided by chan_rtp now accepts
	  "<hostname>:<port>" as an alternative to "<ip_address>:<port>"
	  in the destination. The first AAAA (preferred) or A record resolved
	  will be used as the destination. The lookup is synchronous so beware
	  of possible dialplan delays if you specify a hostname.

	  Change-Id: Ie6f95b983a8792bf0dacc64c7953a41032dba677

2019-08-21 12:03 +0000 [6407ccd2d9]  George Joseph <gjoseph@digium.com>

	* dns_core:  Create new API ast_dns_resolve_ipv6_and_ipv4

	  The new function takes in a pointer to an ast_sockaddr structure,
	  a hostname and an optional port and then dispatches parallel
	  "AAAA" and "A" record queries.  If an "AAAA" record is returned,
	  it's parsed into the ast_sockaddr structure along with the port
	  if it was supplied.  If no "AAAA" record was returned, the
	  first "A" record returned (if any) is parsed instead.

	  This is a synchronous call.  If you need asynchronous lookups,
	  use ast_dns_query_set_resolve_async and roll your own.

	  Change-Id: I194b0b0e73da94b35cc35263a868ffac3a8d0a95

2019-08-21 10:58 +0000 [c8cc530726]  Dan Cropp <dan@amtelco.com>

	* pjproject: Configurable setting for cnonce to include hyphens or not

	  NEC SIP Station interface with authenticated registration only supports cnonce
	  up to 32 characters.  In Linux, PJSIP would generate 36 character cnonce
	  which included hyphens.  Teluu developed this patch adding a compile time
	  setting to default to not include the hyphens.  They felt it best to still
	  generate the UUID and strip the hyphens.
	  They have indicated it will be part of PJSIP 2.10.

	  ASTERISK-28509
	  Reported-by: Dan Cropp

	  Change-Id: Ibdfcf845d4f8c0a14df09fd983b11f2d72c5f470

2019-07-30 12:08 +0000 [fb984eda40]  Stas Kobzar <stas@modulis.ca>

	* res_pjsip: Channel variable SIPFROMDOMAIN

	  In chan_sip, there was variable SIPFROMDOMAIN that allows to set
	  From header URI domain per channel. This patch introduces res_pjsip
	  variable SIPFROMDOMAIN for backward compatibility with chan_sip.

	  ASTERISK-28489

	  Change-Id: I715133e43172ce2a1e82093538dc39f9e99e5f2e

2019-08-20 13:04 +0000 [f82d0b74fd]  George Joseph <gjoseph@digium.com>

	* res_ari.c:  Prefer exact handler match over wildcard

	  Given the following request path and 2 handler paths...
	  Request: /channels/externalMedia
	  Handler: /channels/{channelId}      "wildcard"
	  Handler: /channels/externalmedia    "non-wildcard"

	  ...if /channels/externalMedia was registered as a handler after
	  /channels/{channelId} as shown above, the request would automatically
	  match the wildcard handler and attempt to parse "externalMedia" into
	  the channelId variable which isn't what was intended.  It'd work
	  if the non-wildard entry was defined in rest-api/api-docs/channels.json
	  before the wildcard entry but that makes the json files
	  order-dependent which isn't a good thing.

	  To combat this issue, the search loop saves any wildcard match but
	  continues looking for exact matches at the same level.  If it finds
	  one, it's used.  If it hasn't found an exact match at the end of
	  the current level, the wildcard is used.  Regardless, after
	  searching the current level, the wildcard is cleared so it won't
	  accidentally match for a different object or a higher level.

	  BTW, it's currently not possible for more than 1 wildcard entry
	  to be defined for a level.  For instance, there couldn't be:
	  Handler: /channels/{channelId}
	  Handler: /channels/{channelName}
	  We wouldn't know which one to match.

	  Change-Id: I574aa3cbe4249c92c30f74b9b40e750e9002f925

2019-08-09 15:53 +0000 [51fd43206b]  Sean Bright <sean.bright@gmail.com>

	* audiohook.c: Substitute silence for unavailable audio frames

	  There are 4 scenarios to consider when capturing audio from a channel
	  with an audiohook:

	   1. There is no rx and no tx audio, so return nothing.
	   2. There is rx but no tx audio, so return rx.
	   3. There is tx but no rx audio, so return tx.
	   4. There is rx and tx audio, so mix them and return.

	  The file passed as the primary argument to MixMonitor will be written to
	  in scenarios 2, 3, and 4. However, if you pass the r() and t() options
	  to MixMonitor, a frame will only be written to the r() file if there was
	  rx audio and a frame will only be written to the t() file if there was
	  tx audio.

	  If you subsequently take the r() and t() files and try to mix them, the
	  sides of the conversation will 'drift' and be non-representative of the
	  user experience.

	  This patch adds a new 'S' option to MixMonitor that injects a frame of
	  silence on either the r() side or the t() side of the channel so that
	  when later mixed, there is no such drift.

	  Change-Id: Ibf5ed73a811087727bd561a89a59f4447b4ee20e

2019-08-14 14:52 +0000 [ff180a5bfc]  Alexei Gradinari <alex2grad@gmail.com>

	* app_voicemail/IMAP: check mailstream not NULL in leave_voicemail

	  The function leave_voicemail checks if expungeonhangup is set,
	  but does not check if IMAP stream is closed,
	  so it could call imap function with NULL stream.
	  This leads to segfault.

	  ASTERISK-28505 #close

	  Change-Id: Ib66c57c1f1ba97774e447b36349198e2626a8d7c

2019-08-09 05:51 +0000 [8399211eaf]  Sean Bright <sean.bright@gmail.com>

	* menuselect: Fix curses build on Gentoo Linux

	  Because keypad() is exported by libtinfo, it needs to be explicitly
	  added to the linker options.

	  ASTERISK-28487 #close

	  Change-Id: I6c2ad5b95f422c263d078b5c0e84c111807dffc6

2019-08-08 12:10 +0000 [92066b8746]  George Joseph <gjoseph@digium.com>

	* CI: Escape backslashes in printenv/sort/tr

	  Change-Id: I52be64c8f6af2bbe15148a856d1f10cb113e1e94
	  (cherry picked from commit c6558e09af3ac15b31377de735cc96d8df0275a7)

2019-08-07 17:54 +0000 [d4766a82a2]  Kevin Harwell <kharwell@digium.com>

	* srtp: Fix possible race condition, and add NULL checks

	  Somehow it's possible for the srtp session object to be NULL even though the
	  Asterisk srtp object itself is valid. When this happened it would cause a
	  crash down in the srtp code when attempting to protect or unprotect data.

	  After looking at the code there is at least one spot that makes this situation
	  possible. If Asterisk fails to unprotect the data, and after several retries
	  it still can't then the srtp->session gets freed, and set to NULL while still
	  leaving the Asterisk srtp object around. However, according to the original
	  issue reporter this does not appear to be their situation since they found
	  no errors logged stating the above happened (which Asterisk does for that
	  situation).

	  An issue was found however, where a possible race condition could occur between
	  the pjsip incoming negotiation, and the receiving of RTP packets. Both places
	  could attempt to create/setup srtp for the same rtp instance at the same time.
	  This potentially could be the cause of the problem as well.

	  Given the above this patch adds locking around srtp setup for a given rtp, or
	  rtcp instance. NULL checks for the session have also been added within the
	  protect and unprotect functions as a precaution. These checks should at least
	  stop Asterisk from crashing if it gets in this situation again.

	  This patch also fixes one other issue noticed during investigation. When doing
	  a replace the old object was freed before creating the replacement. If the new
	  replacement object failed to create then the rtp/rtcp instance would now point
	  to freed srtp data which could potentially cause a crash as well when the next
	  attempt to reference it was made. This is now fixed so the old srtp object is
	  kept upon replacement failure.

	  Lastly, more logging has been added to help diagnose future issues.

	  ASTERISK-28472

	  Change-Id: I240e11cbb1e9ea8083d59d50db069891228fe5cc

2019-08-08 07:12 +0000 [db9684ad1e]  George Joseph <gjoseph@digium.com>

	* CI:  Add "throttle" label and "skip_gate" capability

	  To make throttling by label fully active, the "throttle" option
	  has to be specified with a specific label.

	  You can now specify "skip_gate" in the Gerrit comments when you
	  do a +2 code review to tell Jenkins not to actually run the
	  gate.  You'd do this if you plan to manually merge the change.

	  Also updated the "printenv" debug output to better sort multi-line
	  comments.

	  Change-Id: I4c0b1085acec4805f2ca207eebac50aad81f27e2

2019-08-05 07:23 +0000 [6350f4e278]  Joshua Colp <jcolp@digium.com>

	* cdr / cel: Use event time at event creation instead of processing.

	  When updating times on CDR or CEL records using the time at which
	  it is done can result in times being incorrect if the system is
	  heavily loaded and stasis message processing is delayed.

	  This change instead makes it so CDR and CEL use the time at which
	  the stasis messages that drive the systems are created. This allows
	  them to be backed up while still producing correct records.

	  ASTERISK-28498

	  Change-Id: I6829227e67aefa318efe5e183a94d4a1b4e8500a

2019-08-06 10:40 +0000 [2641081caa]  George Joseph <gjoseph@digium.com>

	* CI:  Make node labels job-specific

	  Originally, the eligible nodes for a job were labelled only by
	  "swdev-docker".  So basically any node could run any job.  We had
	  found that allowing a node to run more than 1 gate at a time was
	  problematic so we limited the nodes to processing 1 job at a time.
	  With the creation of the Asterisk 17 branches however, we now have
	  so many active branches that getting checks and gates through in
	  a timely manner is problematic when a node can run only 1 job
	  at a time.

	  Now the nodes are also labelled by the job type they can run.
	  For instance: "asterisk-check", "asterisk-gate", etc.  With the
	  "Throttle Concurrent Builds" plugin, we can now allow a node to
	  run more than 1 job BUT throttle by job type.  For instance:
	    Allow 2 jobs but only 1 asterisk-gate at a time.
	  Now a node can run 2 checks or 1 check and 1 gate or 1 gate but
	  not 2 gates at a time.

	  Change-Id: I2032bf6afbcec5c341d9b852214c0c812d3d6db5

2019-08-01 16:22 +0000 [6bb14150c4]  Kevin Harwell <kharwell@digium.com>

	* various modules: json integer overflow

	  There were still a few places in the code that could overflow when "packing"
	  a json object with a value outside the base type integer's range. For instance:

	  unsigned int value = INT_MAX + 1
	  ast_json_pack("{s: i}", value);

	  would result in a negative number being "packed". In those situations this patch
	  alters those values to a ast_json_int_t, which widens the value up to a long or
	  long long.

	  ASTERISK-28480

	  Change-Id: Ied530780d83e6f1772adba0e28d8938ef30c49a1

2019-07-29 10:15 +0000 [9718376902]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Use a vector instead of custom array allocation

	  Change-Id: Ic476a56608b1820ca93dcf68d10cd76fc0b94141

2019-08-01 05:07 +0000 [c2b135729c]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Fix multiple of the same contact in "pjsip show contacts".

	  The code for gathering contacts could result in the same contact
	  being retrieved and added to the list multiple times. The container
	  which stores the contacts to display will now only allow a contact
	  to be added to it once instead of multiple times.

	  ASTERISK-28228

	  Change-Id: I805185cfcec03340f57d2b9e6cc43c49401812df

2019-07-17 07:35 +0000 [83390327b2]  Torrey Searle <torrey@voxbone.com>

	* main/udptl.c: correctly handle udptl sequence wrap around

	  incorrect handling of UDPTL squence number wrap arounds causes
	  loss of packets every time the wrap around occurs

	  ASTERISK-28483 #close

	  Change-Id: I33caeb2bf13c574a1ebb81714b58907091d64234

2019-07-24 15:12 +0000 [0ebfc4a19d]  Sean Bright <sean.bright@gmail.com>

	* manager: Send fewer packets

	  The functions that build manager message headers do so in a way that
	  results in a single messages being split across multiple packets. While
	  this doesn't matter to the remote end, it makes network captures noisier
	  and harder to follow, and also means additional system calls.

	  With this patch, we build up more of the message content into the TLS
	  buffer before flushing to the network. This change is completely
	  internal to the manager code and does not affect any of the existing
	  API's consumers.

	  Change-Id: I50128b0769060ca5272dbbb5e60242d131eaddf9

2019-07-29 10:04 +0000 [d6af1acb8c]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Use ast_pipe_nonblock() wrapper

	  Change-Id: Ib0a4b41e5ececbe633079e2d8c2b66c031d2d1f2

2019-07-29 08:31 +0000 [05cf9c9912]  George Joseph <gjoseph@digium.com>

	* loader.c:  Fix possible SEGV when a module fails to register

	  When a module fails to register itself (usually a coding error
	  in the module), dlerror() can return NULL.  We weren't checking
	  for that in load_dlopen() before trying to strdup the error message
	  so a SEGV was thrown.  dlerror() is now surrounded with an S_OR
	  so we don't SEGV.

	  Change-Id: Ie0fb9316f08a321434f3f85aecf3c7d2ede8b956

2019-07-24 15:15 +0000 [06780d2bc4]  George Joseph <gjoseph@digium.com>

	* CI:  Don't enable non-core modules in Certified branches

	  We don't support non-core modules for Certified releases but we
	  were enabling them for CI builds which was causing lots of test
	  failures.  Now we don't.

	  Change-Id: I0b3254c08a2479f3d39151690350cce5ce5ad766

2019-07-23 12:58 +0000 [28654308ef]  Sean Bright <sean.bright@gmail.com>

	* res_config_sqlite3: Only join threads that we started

	  ASTERISK-28477 #close
	  Reported by: Dennis

	  ASTERISK-28478 #close
	  Reported by: Dennis

	  Change-Id: I77347ad46a86dc5b35ed68270cee56acefb4f475

2019-05-12 13:29 +0000 [3814faf848]  Leonid Fainshtein <leonid.fainshtein@xorcom.com>

	* openr2(6/6): Set hangup cause

	  Change-Id: I94dc38920e6e77cc73062648f62fdd613d0d1452
	  Signed-off-by: Oron Peled <oron.peled@xorcom.com>

2019-04-22 14:14 +0000 [06515707df]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* openr2(5/6): added cli command -- mfcr2 destroy link <index>

	  Change-Id: I452d6a853bcd8c6e194455b19e5e017713e9c0fe
	  Signed-off-by: Oron Peled <oron.peled@xorcom.com>

2019-04-22 10:27 +0000 [93a093f6c4]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* openr2(4/6): added new cli command -- mfcr2 show links

	  * This command show the MFC/R2 links

	  Change-Id: I213822e1b7ef9c05bd89a2ba62df8e0856ce9f84
	  Signed-off-by: Oron Peled <oron.peled@xorcom.com>

2019-04-22 07:27 +0000 [a45cfefb77]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* openr2(3/6): Convert r2links to standard Asterisk AST_LIST*

	  Change-Id: Ibcb2401515a58782a1488c0b9efbed201c3f3a17
	  Signed-off-by: Oron Peled <oron.peled@xorcom.com>

2019-04-22 07:33 +0000 [ec6e88592a]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* openr2(2/6): Stop polling channels when DAHDI returns -ENODEV (e.g: plug-out)

	  Otherwise, OpenR2 threads go crazy and consume almost all CPU resources

	  Change-Id: I10a41f617613fe7399c5bdced5c64a2751173f28
	  Signed-off-by: Oron Peled <oron.peled@xorcom.com>

2019-04-22 10:02 +0000 [7b6df814a6]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* openr2(1/6): bugfix in configuration saving

	  Details:
	    - The memcpy() call copied part of "dahdi_conf" and not "dahdi_conf.mfcr2"
	    - As a result, the memcmp() in dahdi_r2_get_link() always fails
	    - This cause dahdi_r2_get_link() to create new link for every channel
	      (instead of a new link for every ~30 channels)
	    - With the fix, far less links are generated -- so we use far less threads

	  Change-Id: I7259dd6272f5e46e8a6c7f5bf3e8c2ec01b8c132
	  Signed-off-by: Oron Peled <oron.peled@xorcom.com>

2019-07-19 11:20 +0000 [356f4256cc]  George Joseph <gjoseph@digium.com>

	* CI: Add cleanWs to cleanup steps in jenkinsfiles

	  We're at the point where there are enough Jenkins jobs for
	  Asterisk branches than even cleaned checkouts of Asterisk
	  will add up to more disk space than is available on the
	  in-memory workspace mount.  Since we archive all relevent
	  artifacts anyway, there's no need to keep the workspace
	  around after the job finishes, whether it succeeds or fails.

	  Change-Id: I1cd3b73ebb045a987df0f62526d152a510210c39

2019-04-02 14:42 +0000 [f4896703b9]  Dan Cropp <dan@amtelco.com>

	* chan_pjsip:  Transmit REFER waits for the REFER result setting TRANSFERSTATUS

	  Previously, when a Transfer (REFER) was performed, chan_pjsip would set
	  the TRANSFERSTATUS to SUCCESS when the REFER was queued up.  This did not
	  reflect a successful/unsuccessful transfer the way chan_sip did.
	  Added a callback module to process the refer subscription information.

	  Now depends on res_pjsip_pubsub so call transfer progress can be monitored
	  and reported

	  ASTERISK-26968 #close
	  Reported-by: Dan Cropp

	  Change-Id: If6c27c757c66f71e8b75e3fe49da53ebe62395dc

2019-07-04 19:46 +0000 [9d69469203]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* README.md: Update year

	  Change-Id: I746fb94d112c7d797e206bca0fd1e13fcd26bae3

2019-07-19 08:38 +0000 [c86c0973ff]  George Joseph <gjoseph@digium.com>

	* CI:  Add install-headers to the install make targets

	  The testsuite actually needs the headers installed to run
	  it's self_test.

	  Change-Id: Ice41d331131b876ad4a9c056085fe6aac34b32b2

2019-07-17 08:06 +0000 [64d25d36fb]  Walter Doekes <walter+asterisk@wjd.nu>

	* sched: Don't allow ast_sched_del to deadlock ast_sched_runq from same thread

	  When fixing ASTERISK~24212, a change was done so a scheduled callback could not
	  be removed while it was running. The caller of ast_sched_del would have to wait.

	  However, when the caller of ast_sched_del is the callback itself (however wrong
	  this might be), this new check would cause a deadlock: it would wait forever
	  for itself.

	  This changeset introduces an additional check: if ast_sched_del is called
	  by the callback itself, it is immediately rejected (along with an ERROR log and
	  a backtrace). Additionally, the AST_SCHED_DEL_UNREF macro is adjusted so the
	  after-ast_sched_del-refcall function is only run if ast_sched_del returned
	  success.

	  This should fix the following spurious race condition found in chan_sip:
	  - thread 1: schedule sip_poke_peer_now (using AST_SCHED_REPLACE)
	  - thread 2: run sip_poke_peer_now
	  - thread 2: blank out sched-ID (too soon!)
	  - thread 1: set sched-ID (too late!)
	  - thread 2: try to delete the currently running sched-ID

	  After this fix, an ERROR would be logged, but no deadlocks (in do_monitor) nor
	  excess calls to sip_unref_peer(peer) (causing double frees of rtp_instances and
	  other madness) should occur.

	  (Thanks Richard Mudgett for reviewing/improving this "scary" change.)

	  Note that this change does not fix the observed race condition: unlocked
	  access to peer->pokeexpire (and potentially other scheduled items in chan_sip),
	  causing AST_SCHED_DEL_UNREF to look at a changing id. But it will make the
	  deadlock go away. And in the observed case, it will not have adverse affects
	  (like memory leaks) because the scheduled item is removed through a different
	  path.

	  ASTERISK-28282

	  Change-Id: Ic26777fa0732725e6ca7010df17af77a012aa856

2019-07-16 08:15 +0000 [f62d9013c1]  George Joseph <gjoseph@digium.com>

	* Build: Add separate header install/uninstall targets

	  Two new Makefile targets have been added... "install-headers" and
	  "uninstall-headers" to separately control header installation.
	  The existing behavior has not changed so "make install" and
	  "make uninstall" will continue to also install/uninstall the headers.
	  The new targets were added for forward compatibility with Asterisk 17
	  in which the headers are no longer installed/uninstalled with the
	  "install" and "uninstall" targets.

	  Also corrects an issue where /usr/include/asterisk.h was never
	  being removed at all.

	  Change-Id: Ia7399f3a0203a4825fc4a9f43b9034dae9a2b643

2019-07-09 14:42 +0000 [88ea395c33]  Kevin Harwell <kharwell@digium.com>

	* manager: Log AMI actions

	  When manager debugging is turned on, this patch makes it so incoming AMI actions
	  are now also logged.

	  Change-Id: I8047524510e7ac97d99482b2448f8e368f29cd47

2019-07-18 11:14 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.5.0-rc1 Released.

2019-07-18 06:07 +0000 [cb831a18d1]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.5.0
2019-07-14 13:26 +0000 [1756029237]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Move where DTLS MTU variable is defined.

	  The DTLS MTU variable is not dependent on pjproject and should
	  not exist in its block.

	  Change-Id: I7e97d64dc192f2ac81bfe2b72b8229d321c7d026

2019-06-12 13:03 +0000 [2126dc3021]  George Joseph <gjoseph@digium.com>

	* res_pjsip_messaging:  Check for body in in-dialog message

	  We now check that a body exists and it has a length > 0 before
	  attempting to process it.

	  ASTERISK-28447
	  Reported-by: Gil Richard

	  Change-Id: Ic469544b22ab848734636588d4c93426cc6f4b1f

2019-06-28 11:15 +0000 [6c59df17a5]  Francesco Castellano <francesco.castellano@messagenet.it>

	* chan_sip: Handle invalid SDP answer to T.38 re-invite

	  The chan_sip module performs a T.38 re-invite using a single media
	  stream of udptl, and expects the SDP answer to be the same.

	  If an SDP answer is received instead that contains an additional
	  media stream with no joint codec a crash will occur as the code
	  assumes that at least one joint codec will exist in this
	  scenario.

	  This change removes this assumption.

	  ASTERISK-28465

	  Change-Id: I8b02845b53344c6babe867a3f0a5231045c7ac87

2019-07-01 16:57 +0000 [da1db4f842]  Chris-Savinovich <csavinovich@digium.com>

	* chan_dahdi.c: crash in chan_dahdi

	  Fixes a crash in chan_dahdi occurring on 32-bit systems. A previous
	  patch introduced a variable of type unassigned long long which is 64-bits.
	  Casting it as 'ast_json_int_t' along with JSON type 'I' makes it work
	  with 32-bit systems.

	  ASTERISK-28457

	  Change-Id: I9cef6b5f2d826fc5c93f2f6a1c997c4e3e6c93fe

2019-07-01 10:49 +0000 [83aba363fe]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_sdp_rtp: Remove unused variable

	  The variable 'endpoint_caps' in function 'set_caps' is not used, so remove.

	  ASTERISK-28458

	  Change-Id: Ia8766d05a0738aecb29dd018302c2dafca5cab34

2019-06-27 15:04 +0000 [0dc61e41fa]  George Joseph <gjoseph@digium.com>

	* tcptls.c:  Add peer hostname and port to some error messages

	  Where possble, hostname and port has been added to error
	  messages, mostly on the server side.

	  ASTERISK-26006
	  Reported by: Oleksandr Natalenko

	  Change-Id: Iff4f897277bc36ce8c5b493b71d0a4a7b74e62f0

2019-06-27 12:46 +0000 [2db5173b88]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Add peer information to most SSL/TLS errors

	  Most SSL/TLS error messages coming from pjproject now have either
	  the peer address:port or peer hostname, depending on what was
	  available at the time and code location where the error was
	  generated.

	  ASTERISK-28444
	  Reported by: Bernhard Schmidt

	  Change-Id: I41770e8a1ea5e96f6e16b236692c4269ce1ba91e

2019-06-24 08:30 +0000 [31d755e805]  George Joseph <gjoseph@digium.com>

	* sig_pri:  Address gcc9 issues

	  A few more format truncation issues addressed.

	  Change-Id: I047f373169caaca0eec4889d3c0e5e10f130017a

2019-05-21 01:38 +0000 [52a3d4a761]  Nasir Iqbal <nasir@ictinnovations.com>

	* app_amd: issue with silence suppression fixed

	  Now AMD algorithm will not ignore AST_FRAME_NULL, As I think using manual
	  wait time instead of `framelength` is enough to fix timeout / TOOLONG issue.

	  ASTERISK-28419 #close

	  Change-Id: I16ea2d6295bc99b975e8c092e5f9fbd9214debdb

2019-06-19 11:58 +0000 [01712bbdc9]  George Joseph <gjoseph@digium.com>

	* CI:  New way to determnine libdir

	  We were using the presence of /usr/lib64 to determine where
	  shared libraries should be installed.  This only existed on
	  Redhat based systems and was safe.  If it existed, use it,
	  otherwise use /usr/lib.

	  Unfortunately, Ubuntu 19 decided to create a /usr/lib64 BUT
	  NOT INCLUDE IT IN THE DEFAULT ld.so.conf.  So if anything is
	  installed there, it won't work.

	  The new method, just looks for $ID in /etc/os-release and if it's
	  centos or fedora, uses /usr/lib64 and if ubuntu, uses /usr/lib.

	  NOTE:  This applies only to the CI scripts.  Normal asterisk
	  build and install is not affected.

	  Change-Id: Iad66374b550fd89349bedbbf2b93f8edd195a7c3

2019-06-17 12:11 +0000 [1ee2f01f62]  George Joseph <gjoseph@digium.com>

	* chan_dahdi:  Address gcc9 issues

	  Fixed format-truncation issues in chan_dahdi.c and
	  sig_analog.c.  Since they're related to fields provided
	  by dahdi-tools we can't change the buffer sizes so we're just
	  checking the return from snprintf and printing an errior if we
	  overflow.

	  Change-Id: Idc1f3c1565b88a7d145332a0196074b5832864e5

2019-06-14 15:45 +0000 [8b77318a2c]  Alexei Gradinari <alex2grad@gmail.com>

	* translate.c do not log WARNING on empty audio frame

	  There is WARNING "no samples for ..." on each Playtones.
	  The function ast_playtones_start calls ast_activate_generator,
	  which calls ast_prod.
	  The function ast_prod calls ast_write with empty audio frame.
	  In this case it's spam log.

	  Change-Id: Id4ac309489d9ff281bad02abdef341cecdede660

2019-06-10 16:58 +0000 [ccc92b6ecb]  George Joseph <gjoseph@digium.com>

	* app_confbridge:  Attended transfer event fixup

	  When a channel already in a conference bridge is attended transfered
	  to another extension, or when an existing call is attended
	  transferred into a conference bridge, we now generate ConfbridgeJoin
	  and ConfbridgeLeave events for the entering and departing channels.

	  Change-Id: Id7709cfbceb26fbcb828b2d0d2a6b2fbeaf028e1

2019-06-13 10:11 +0000 [694097ee68]  Sean Bright <sean.bright@gmail.com>

	* pjproject: Update to 2.9 release

	  Relies on https://github.com/asterisk/third-party/pull/4

	  Change-Id: Iec9cad42cb4ae109a86a3d4dae61e8bce4424ce3

2019-06-11 07:26 +0000 [82789aafd6]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Add support for DTLS packet fragmentation.

	  This change adds support for larger TLS certificates by allowing
	  OpenSSL to fragment the DTLS packets according to the configured
	  MTU. By default this is set to 1200.

	  This is accomplished by implementing our own BIO method that
	  supports MTU querying. The configured MTU is returned to OpenSSL
	  which fragments the packet accordingly. When a packet is to be
	  sent it is done directly out the RTP instance.

	  ASTERISK-28018

	  Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06

2019-06-06 07:48 +0000 [72f26aa8eb]  Abhay Gupta <abhay@avissol.com>

	* chan_pjsip.c: Check for channel and session to not be NULL in hangup

	  We have seen some rare case of segmentation fault in hangup function
	  and we could notice that channel pointer was NULL.  Debug log shows
	  that there is a 200 OK answer and SIP timeout at the same time.  It
	  looks that while the SIP session was being destroyed due to timeout
	  call hangup due to answer event lead to race condition and channel
	  is being destroyed from two different places.  The check ensures we
	  check it not to be NULL before freeing it.

	  ASTERISK-25371

	  Change-Id: I19f6566830640625e08f7b87bfe15758ad33a778

2019-01-08 00:14 +0000 [a1c84709b8]  Kirsty Tyerman <kirsty.tyerman@boeing.com>

	* pbx_dundi: added IPv4/IPv6 dual bind support to DUNDi

	  ASTERISK-28234
	  Reported-by: Kirsty Tyerman

	  Change-Id: I5d6e6b52dbe51415046bb3953fd16f5b421bc2e1

2019-06-04 12:41 +0000 [c2621aa190]  Chris-Savinovich <csavinovich@digium.com>

	* cdr_pgsql: fix error in connection string

	  Fixes an error occurring in function pgsql_reconnect() caused when value of
	  hostname is blank. Which in turn will cause the connection string to look
	  like this: "host= port=xx", which creates a sintax error. This fix now checks
	  if the corresponding values for host, port, dbname, and user are blank. Note
	  that since this is a reconnect function the database library will replace any
	  missing value pairs with default ones.

	  ASTERISK-28435

	  Change-Id: I0a921f99bbd265768be08cd492f04b30855b8423

2019-05-21 14:12 +0000 [86cd77ec0a]  Alexei Gradinari <alex2grad@gmail.com>

	* app_attended_transfer: new application AttendedTransfer

	  AttendedTransfer queues up attended transfer to the given extension.

	  This application can be useful with Custom Dynamic Features.
	  For example to make attended transfer to a predefined number.

	  features.conf
	  ;;;
	  [applicationmap]
	  my_atxfer => *7,self,GoSub,"my_atxfer,s,1",default
	  ;;;

	  extensions.conf
	  ;;;
	  [globals]
	  DYNAMIC_FEATURES=my_atxfer
	  TRANSFER_CONTEXT=my_transfer

	  [my_atxfer]
	  exten => s,1,AttendedTransfer(1234567890)
	     same => n,Return()

	  [my_transfer]
	  include => default
	  ;;;

	  This application also can be used to completly redefine Attended transfer
	  feature using dialplan. For example:

	  features.conf
	  ;;;
	  [featuremap]
	  atxfer => *7

	  [applicationmap]
	  custom_atxfer => *2,self,GoSub,"custom_atxfer,s,1",default
	  ;;;

	  extensions.conf
	  ;;;
	  [globals]
	  DYNAMIC_FEATURES=custom_atxfer
	  TRANSFER_CONTEXT=my_transfer

	  [custom_atxfer]
	  exten => s,1,
	     same => n,Playback(pbx-transfer)
	     same => n,Read(dest,dial,10,i,3,3)
	     same => n,AttendedTransfer(${dest})
	     same => n,Return()

	  [my_transfer]
	  include => default
	  ;;;

	  Change-Id: Ie5cfa455d0813cffd5c85a6fb117f07d8f0b903b

2019-05-29 17:54 +0000 [6321b559b9]  Alexei Gradinari <alex2grad@gmail.com>

	* res_fax: gateway sends T.38 request to both endpoints if V.21 detected

	  According T.38 Gateway 'Use case 3'
	  https://wiki.asterisk.org/wiki/display/AST/T.38+Gateway
	  T.38 Gateway should send T.38 negotiation request to called endpoint
	  if FAX preamble (using V.21 detector) generated by called endpoint.
	  But it does not, because fax_gateway_detect_v21 constructs T.38
	  negotiation request, but forwards it only to other channel,
	  not to the channel on which FAX preamble is detected.

	  Some SIP endpoints could be improperly configured to rely on the other side
	  to initiate T.38 re-INVITEs.

	  With this patch the T.38 Gateway tries to negotiate with both sides
	  by sending T.38 negotiation request to both endpoints supported T.38.

	  Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39

2019-05-30 12:08 +0000 [d2c07aceca]  Asterisk Development Team <asteriskteam@digium.com>

	* Update CHANGES and UPGRADE.txt for 16.4.0
2019-05-28 17:15 +0000 [e77704f45c]  Alexei Gradinari <alex2grad@gmail.com>

	* res_fax: add channel name to CLI 'fax show session'

	  This patch adds a channel name to output of CLI 'fax show session'
	  and also expands the channel name field up to 30 characters on
	  CLI 'fax show sessions'

	  Change-Id: Id059c43ff41811f5e76712b83fb63b8f246da953

2019-05-28 15:35 +0000 [e0a574253e]  Alexei Gradinari <alex2grad@gmail.com>

	* res_fax: fix segfault on inactive "reserved" fax session

	  The change #10017 "Handle fax gateway being started more than once"
	  introdiced a bug which leads to segfault in res_fax_spandsp.

	  The res_fax_spandsp module does not support reserving sessions, so
	  fax_session_reserve returns a fax session with state AST_FAX_STATE_INACTIVE.

	  The fax_gateway_start does not create a real fax session if the fax session
	  is already present and the state is not AST_FAX_STATE_RESERVED.
	  But the "reserved" session created for res_fax_spandsp has state
	  AST_FAX_STATE_INACTIVE, so fax_gateway_start not starting.

	  Then when fax_gateway_framehook is called and gateway T.38 state is
	  NEGOTIATED the call of gateway->s->tech->write(gateway->s, f) leads to
	  segfault, because session tech_pvt is not set, i.e. the tech session
	  was not initialized/started.

	  This patch adds check also on AST_FAX_STATE_INACTIVE to the "reserved"
	  session created for res_fax_spandsp will start.

	  This patch also adds extra check and log ERROR if tech_pvt is not set
	  before call tech->write.

	  ASTERISK-27981 #close

	  Change-Id: Ife3e65e5f18c902db2ff0538fccf7d28f88fa803

2019-05-24 09:01 +0000 [ec74fd56a7]  Ben Ford <bford@digium.com>

	* build: Fix file format in CHANGES-staging.

	  One of the change files doesn't conform to the format that the release
	  scripts need in order to parse it.

	  Change-Id: Ie0b634cf27e4cbc671b9fe92993b6f2ecf60254c

2019-05-23 09:44 +0000 [86fb72c4d0]  Guido Falsi <madpilot@FreeBSD.org>

	* chan_dahdi: add missing include.

	  After some definitions have been moved to asterisk/mwi.h the files
	  channels/chan_dahdi.h channels/sig_pri.c are missing this new
	  include.

	  ASTERISK-28427 #close

	  Change-Id: Ia8cc595eeda653324643f40dcd9799d4c3f0ac91

2019-05-21 11:29 +0000 [9351aa3f0e]  Morten Tryfoss <morten@tryfoss.no>

	* res_rtp_asterisk: timestamp should be unsigned instead of signed int

	  Using timestamp with signed int will cause timestamps exceeding max value
	  to be negative.
	  This causes the jitterbuffer to do passthrough of the packet.

	  ASTERISK-28421

	  Change-Id: I9dabd0718180f2978856c50f43aac4e52dc3cde9

2019-05-21 14:53 +0000 [db5bc0fabf]  Alexei Gradinari <alex2grad@gmail.com>

	* app_blind_transfer: new application BlindTransfer

	  BlindTransfer redirects all channels currently bridged to the
	  caller channel to the specified destination.

	  This application can be useful with Custom Dynamic Features.
	  For example to make blind transfer to a predefined number.

	  features.conf
	  ;;;
	  [applicationmap]
	  my_blindxfer => *6,self,GoSub,"my_blindxfer,s,1",default
	  ;;;

	  extensions.conf
	  ;;;
	  [globals]
	  DYNAMIC_FEATURES=my_blindxfer

	  [my_blindxfer]
	  exten => s,1,BlindTransfer(1234567890,default)
	     same => n,Return()
	  ;;;

	  This application also can be used to completly redefine Blind transfer
	  feature using dialplan. For example:

	  features.conf
	  ;;;
	  [featuremap]
	  blindxfer =>

	  [applicationmap]
	  custom_blindxfer => ##,self,GoSub,"custom_blindxfer,s,1",default
	  ;;;

	  extensions.conf
	  ;;;
	  [globals]
	  DYNAMIC_FEATURES=custom_blindxfer

	  [custom_blindxfer]
	  exten => s,1,
	     same => n,Playback(pbx-transfer)
	     same => n,Read(dest,dial,10,i,3,3)
	     same => n,BlindTransfer(${dest},default)
	     same => n,Return()
	  ;;;

	  Change-Id: I9d55e7f69ccfd4472dec00d62771d6de8803215a

2019-05-17 17:45 +0000 [9516fb64c9]  Alexei Gradinari <alex2grad@gmail.com>

	* app_readexten: new option 'p' to stop reading on '#' key

	  This patch adds the 'p' option.
	  The extension entered will be considered complete when a # is entered.

	  Change-Id: If77c40c9c8b525885730821e768f5dea71cf04c1

2019-05-13 15:37 +0000 [de82bdd746]  Alexei Gradinari <alex2grad@gmail.com>

	* pjsip: replace 180 by 183 if SDP negotiation has completed

	  The caller endpoint hears dead silence if a callee replies 180 (without SDP)
	  and the caller already received 183 (with SDP).
	  It happens because Asterisk sends 180 (WITH SDP) to the caller,
	  there are not incoming RTP packets from the callee
	  and Asterisk does not generate inband ringing,
	  so there are not any outgoing RTP packets to the caller.

	  This patch replaces 180 by 183 if SDP negotiation has completed,
	  as if the caller endpoint is configured with "inband_progress=yes".

	  In this case Asterisk will generate inband ringing untill Asterisk receive
	  incoming RTP packets from the callee.

	  ASTERISK-27994 #close

	  Change-Id: I7450b751083ec30d68d6abffe922215a15ae5a73

2019-05-22 18:41 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.4.0-rc1 Released.

2019-05-20 12:45 +0000 [33ed2e1bb8]  Joshua Colp <jcolp@digium.com>

	* pjproject-bundled:  Add upstream timer fixes

	  Fixed #2191:
	    - Stricter double timer entry scheduling prevention.
	    - Integrate group lock in SIP transport, e.g: for add/dec ref,
	      for timer scheduling.

	  ASTERISK-28161
	  Reported-by: Ross Beer

	  Change-Id: I2e09aa66de0dda9414d8a8259a649c4d2d96a9f5

2019-05-17 18:44 +0000 [79b15d0b30]  George Joseph <gjoseph@digium.com>

	* res_rtp_asterisk:  Add ability to propose local address in ICE

	  You can now add the "include_local_address" flag to an entry in
	  rtp.conf "[ice_host_candidates]" to include both the advertized
	  address and the local address in ICE negotiation:

	  [ice_host_candidates]
	  192.168.1.1 = 1.2.3.4,include_local_address

	  This causes both 192.168.1.1 and 1.2.3.4 to be advertized.

	  Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db

2019-05-10 10:48 +0000 [e7734476c6]  George Joseph <gjoseph@digium.com>

	* Fixes for GCC 9

	  Various fixes for issues caught by gcc 9.  Mostly snprintf
	  trying to copy to a buffer potentially too small.

	  ASTERISK-28412

	  Change-Id: I9e85a60f3c81d46df16cfdd1c329ce63432cf32e

2019-05-08 10:41 +0000 [ece29db9bd]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Fix sequence number cycling and packet loss count.

	  This change fixes two bugs which both resulted in the packet loss
	  count exceeding 65,000.

	  The first issue is that the sequence number check to determine if
	  cycling had occurred was using the wrong variable resulting in the
	  check never seeing that cycling has occurred, throwing off the
	  packet loss calculation. It now uses the correct variable.

	  The second issue is that the packet loss calculation assumed that
	  the received number of packets in an interval could never exceed
	  the expected number. In practice this isn't true due to delayed
	  or retransmitted packets. The expected will now be updated to
	  the received number if the received exceeds it.

	  ASTERISK-28379

	  Change-Id: If888ebc194ab69ac3194113a808c414b014ce0f6

2019-05-07 11:08 +0000 [941dead08d]  Ben Ford <bford@digium.com>

	* pjsip_options.c: Allow immediate qualifies for new contacts.

	  When multiple endpoints try to register close together using the same
	  AOR with qualify_frequency set, one contact would qualify immediately
	  while the other contacts would have to wait out the duration of the
	  timer before being able to qualify. Changing the conditional to check
	  the contact container count for a non-zero value allows all contacts to
	  qualify immediately.

	  Change-Id: I79478118ee7e0d6e76af7c354d66684220db9415

2019-05-06 16:26 +0000 [edc3e0df1a]  Kevin Harwell <kharwell@digium.com>

	* conversions.c: Add conversions for largest max sized integer

	  Added a conversion for umax (largest maximum sized integer allowed). Adjusted
	  the other current conversion functions (uint and ulong) to be derivatives of
	  the umax conversion since they are simply subsets of umax.

	  Also made the negative check move the pointer on spaces since strtoumax does it
	  anyways.

	  Change-Id: I56c2ef2629d49b524c8df58af12951c181f81f08

2019-05-03 10:49 +0000 [9a0fa51443]  Abhay Gupta <abhay@avissol.com>

	* stasis: Hangup channel for Local channel No such extension error

	  When we use early bridge with create and dial from stasis using Local channel
	  and the dialplan does not any entry the it is returned from core_local.c with
	  No such extension .

	  In such case asterisk locks up till the channel is not hangup with the error
	  Exceptionally long voice queue length

	  * Found that in such case app_control_dial fails on ast_call method and
	    return -1
	  * Since it is called from stasis_app_send_command_async and return -1 does
	    not cause resources to be freed and since no PBX exist it is not able to
	    read from channel causing exceptionally long queue
	  * After putting this code found that the channel was releasing immediately
	    and resources were freed.

	  ASTERISK-28399
	  Reported by: Abhay Gupta
	  Tested by: Abhay Gupta

	  Change-Id: I0a55c923fc6995559f808d63b9488762b4489318

2019-05-03 13:31 +0000 [543d487746]  George Joseph <gjoseph@digium.com>

	* build: Pass --fno-partial-inlining to third-party when appropriate

	  When the gcc version is >= 8.2.1, we were already setting the
	  --fno-partial-inlining flag for Asterisk source files to get around
	  a gcc bug but we weren't passing the flag down to the bundled
	  builds of pjproject and jansson.

	  ASTERISK-28392

	  Change-Id: I99ede9bc35408ecd096f7d5369e8192d3dc75704

2019-05-02 13:29 +0000 [5002169d6a]  George Joseph <gjoseph@digium.com>

	* res_pjsip:  Check return from pjsip_parse_uri calls

	  Updated ast_sip_create_rdata_with_contact and registrar_find_contact
	  to check the return from pjsip_parse_uri before attempting to
	  use the uri returned.

	  ASTERISK-28402
	  Reported-by: Ross Beer

	  Change-Id: I9810b3b163c45ed5a56ec743586e5ce107f13ba7

2019-04-30 09:21 +0000 [39c5188bec]  Abhay Gupta <abhay@avissol.com>

	* stasis: Only place stasis created and dialed channels into dial bridge.

	  The dial bridge is meant to hold channels which have been created
	  and dialed in stasis. It handles the frames coming from them and raises
	  the appropriate events.

	  It was possible for the code to mistakenly place calls which came
	  from the dialplan into the dial bridge if they were not in an
	  answered state. These channels are not outgoing channels and
	  should not be placed into the dial bridge.

	  The code now checks to ensure that only stasis created channels are
	  placed into the dial bridge by checking that a PBX does not exist
	  on the channel.

	  ASTERISK-27756

	  Change-Id: Ideee69ff06c9a0b31f7ed61165f5c055f51d21b6

2019-04-09 23:30 +0000 [f599ebd29e]  Holger Hans Peter Freyther <holger@moiji-mobile.com>

	* stasis: Call callbacks when imparting fails

	  After a bridge has been deleted the stasis control will depart
	  the channel and might attempt to re-add it to the dial bridge.

	  The later can fail and this can lead to a situation that the stasis
	  control is unlinked but the after_bridge_cb_failed cb is executed trying
	  to access a dangling control object.

	  Fix it by calling the after_cb's before bridge_channel_impart_signal.

	  ASTERISK-26718

	  Change-Id: Ib4e8f70d7a21bd54afe3cb51cc6717ef7c355496

2019-04-30 06:22 +0000 [d861ebdca8]  Joshua Colp <jcolp@digium.com>

	* app_confbridge: Add "all" variants of REMB behavior.

	  When producing a combined REMB value the normal behavior
	  is to have a REMB value which is unique for each sender
	  based on all of their receivers. This can result in one
	  sender having low bitrate while all the rest are high.

	  This change adds "all" variants which produces a bridge
	  level REMB value instead. All REMB reports are combined
	  together into a single REMB value that is the same for
	  each sender.

	  ASTERISK-28401

	  Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c

2019-04-23 05:00 +0000 [5023f02b2d]  Joshua Colp <jcolp@digium.com>

	* rtp: Add support for transport-cc in receiver direction.

	  The transport-cc draft is a mechanism by which additional information
	  about packet reception can be provided to the sender of packets so
	  they can do sender side bandwidth estimation. This is accomplished
	  by having a transport specific sequence number and an RTCP feedback
	  message. This change implements this in the receiver direction.

	  For each received RTP packet where transport-cc is negotiated we store
	  the time at which the RTP packet was received and its sequence number.
	  At a 1 second interval we go through all packets in that period of time
	  and use the stored time of each in comparison to its preceding packet to
	  calculate its delta. This delta information is placed in the RTCP
	  feedback message, along with indicators for any packets which were not
	  received.

	  The browser then uses this information to better estimate available
	  bandwidth and adjust accordingly. This may result in it lowering the
	  available send bandwidth or adjusting how "bursty" it can be.

	  ASTERISK-28400

	  Change-Id: I654a2cff5bd5554ab94457a14f70adb71f574afc

2018-12-04 02:10 +0000 [1d214a3623]  Abhay Gupta <abhay@avissol.com>

	* app_amd: Fix infinite loop on silent calls

	  The total time logic will now be executed on calls which
	  do not pass any media.

	  ASTERISK-28143

	  Change-Id: I24726bd29d7e467fc721ca265363417234b22855

2019-04-23 09:47 +0000 [8d35a30a3f]  Ben Ford <bford@digium.com>

	* stasis: Fix crash at shutdown.

	  When compiling in dev mode, stasis statistics are enabled and can cause
	  a crash at shutdown due to the following:
	  - Containers are freed
	  - Topics and subscriptions remain
	  - When those topics and subscriptions are deallocated, they go to do
	    things with the container

	  This changes the containers to global ao2 objects, and whenever needed
	  in the code, a reference must be obtained and checked before any
	  operations can be done.

	  ASTERISK-28353 #close

	  Change-Id: Ie7d5e907fcfcb4d65bd36d5e4eb923126fde8d33

2019-03-29 09:04 +0000 [d6b37e2926]  Antoni Goldstein <action@gdevel.com>

	* app_dial.c: RINGTIME, PROGRESSTIME and ms resolution dial timings

	  Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled
	  at the earliest received PROGRESS or RINGING.
	  Added millisecond versions of DIALEDTIME and ANSWEREDTIME.

	  Added millisecond versions of ast_channel_get_up_time and
	  ast_channel_get_duration in channel.c.

	  ASTERISK-28363

	  Change-Id: If95f1a7d8c4acbac740037de0c6e3109ff6620b1

2019-04-09 13:48 +0000 [e3a758975d]  Kevin Harwell <kharwell@digium.com>

	* mwi core: Move core MWI functionality into its own files

	  There is enough MWI functionality to warrant it having its own 'c' and header
	  files. This patch moves all current core MWI data structures, and functions
	  into the following files:

	  main/mwi.h
	  main/mwi.c

	  Note, code was simply moved, and not modified. However, this patch is also in
	  preparation for core MWI changes, and additions to come.

	  Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0

2019-04-22 11:12 +0000 [e281911667]  George Joseph <gjoseph@digium.com>

	* ARI: Bump non-breaking version number to 4.0.2

	  main/json.c: Added app_name, app_data to channel type
	  res/res_ari: Added ARI resource /ari/channels/{channelId}/rtp_statistics
	  res/res_ari: Added timestamp as a requirement for all ARI events

	  Change-Id: I6363f2a3e757cfd59b2ee5d056388ec47659a0c9

2019-04-07 11:36 +0000 [4dcfa8d127]  Guido Falsi <madpilot@freebsd.org>

	* core/buildsystem: check the actual compiler being version

	  Make compiler check use the output of the actual compiler being
	  used as reported by the CC variable, instead of unconditionally
	  running the "gcc" binary.  Also only run the check if the compiler
	  is gcc or a cross-compile gcc.

	  ASTERISK-28374

	  Change-Id: Icaacf6d93686ad21076878aa1504a23b4fc9d0f4

2019-04-19 09:33 +0000 [daed593cfa]  Lucas Mendes <lucas.mendes@wearespindle.com>

	* res_indications: Fix indications remove command autocomplete

	  We changed the validation of autocomplete parameter in the "indications
	  remove" command to avoid continue the execution of the command after
	  asking for autocomplete out of range parameters.

	  ASTERISK-28391
	  Reported by: lmendes86

	  Change-Id: I92b24131fd02f2e3c7fec966eea6f7a663310d40

2019-04-17 14:45 +0000 [7487fc88d2]  George Joseph <gjoseph@digium.com>

	* res_remb_modifier:  Propertly initialize bitrate to 0.0

	  ...and return the frame unaltered if bitrate can't be determined.

	  Change-Id: Ib2175ab84f85a3d7060d31625f5a2c7fbcc2ba4c

2019-04-08 17:04 +0000 [eca8c440d2]  Dan Cropp <dan@amtelco.com>

	* res_pjsip:  Added a norefersub configuration setting

	  Added a new PJSIP global setting called norefersub.
	  Default is true to keep support working as before.

	  res_pjsip_refer:  Configures PJSIP norefersub capability accordingly.

	  Checks the PJSIP global setting value.
	  If it is true (default) it adds the norefersub capability to PJSIP.
	  If it is false (disabled) it does not add the norefersub capability
	  to PJSIP.

	  This is useful for Cisco switches that do not follow RFC4488.

	  ASTERISK-28375 #close
	  Reported-by: Dan Cropp

	  Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9

2019-04-16 10:58 +0000 [022e784b7a]  Sean Bright <sean.bright@gmail.com>

	* res_mwi_devstate: Specify AST_MODFLAG_LOAD_ORDER to enable load priority

	  Suggested by abelbeck on the issue tracker.

	  ASTERISK~28384
	  Reported by: abelbeck

	  Change-Id: Icee0fff2b58dbfaa80f2b68270fe69dfb0463fc0

2019-04-12 11:32 +0000 [18fe583d12]  George Joseph <gjoseph@digium.com>

	* CI: Move test group config files to Jenkins

	  One of the downaides of having things like test configuration
	  in the git repo is that it can't be changed at runtime.  You have
	  to create a review for the changes and merge it mefore it will
	  take effect.

	  This review moves the data currently held in
	  tests/CI/periodic-dailyTestGroups.json and
	  tests/CI/gateTestGroups.json into a Jenkins Config File attached
	  to the job definitions.  This allows us to alter it from the
	  Jenkins UI at runtime.  The original files stay in the repo
	  as documentation.

	  Change-Id: I14b9702f6285ce1fb2420287ba0e7d3b59109763

2019-04-13 13:36 +0000 [d0a8334e4f]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: Don't split mailbox options on comma

	  Because the per-mailbox options are the last thing on a line, don't look
	  for or stomp on any subsequent commas.

	  ASTERISK-27935 #close
	  Reported by: Sébastien Duthil

	  Change-Id: I07b2eb4a33c303d0c7114d5b906f8c067c60a153

2019-04-12 09:33 +0000 [9b7a64cbf0]  Sean Bright <sean.bright@gmail.com>

	* pbx.c: Ignore dashes in extensions when using extenpatternmatchnew

	  Because hyphens are not matched literally in Asterisk dialplan, we need
	  to ignore them in our candidate extensions as well.

	  ASTERISK-17695 #close
	  Reported by: test011

	  Change-Id: I227f02301577b1633e8a55b9fe9dc149935c03f0

2019-04-09 10:10 +0000 [34b9b65098]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: Cleanup stale lock files on module load

	  If Asterisk crashes while a VM directory is locked, lock files in the VM
	  spool directory will not get properly cleaned up. We now clear them on
	  module load.

	  ASTERISK-20207 #close
	  Reported by: Steven Wheeler

	  Change-Id: If40ccd508e2f6e5ade94dde2f0bcef99056d0aaf

2019-04-12 07:33 +0000 [898765d919]  George Joseph <gjoseph@digium.com>

	* ARI:  Run 'make ari-stubs'

	  An earlier contributor apparently forgot to run 'make ari-stubs'
	  before committing after making ARI model changes.

	  Change-Id: I7813e5638e2821d11f4b968dc2aeab4f725190a6

2019-04-11 15:48 +0000 [116dc9c9b3]  Sean Bright <sean.bright@gmail.com>

	* res_ael: Create consistent label names across reloads

	  Reset the internal counter that the AEL2 compiler uses for unique label
	  names before compiling. This keeps dialplan labels consistent across
	  reloads assuming the AEL2 has not changed.

	  ASTERISK-17799 #close
	  Reported by: Kirill Katsnelson

	  Change-Id: I30b3cc887d1ee0644d3f341e2fef16f525d7fae5

2019-04-11 15:29 +0000 [ea3109beaa]  Sean Bright <sean.bright@gmail.com>

	* res_ael: Use Gosub in for loop expressions

	  In AEL2, if a 'for' statement contains macro* calls, like:

	      for (&iterator(${TRY},A); "${A}" != ""; &iterate(A)) {

	  The AEL2 parser will translate these into calls to the deprecated Macro
	  dialplan application and use the antiquated pipe delimiter.

	  Instead, convert these into calls to the Gosub dialplan application and
	  use commas as argument separators.

	  ASTERISK-18593 #close
	  Reported by: Luke-Jr

	  * 'macro' in this context means AEL2 macros, not the 'Macro' application

	  Change-Id: I3d73716033b8e3e42e0209d355bf5f10c97045fc

2019-04-11 11:03 +0000 [71c7864d1d]  Sean Bright <sean.bright@gmail.com>

	* res_ael: Fix pattern matching against literal '+'

	  When generating the regular expression that matches against existing
	  extensions, we need to escape literal characters that can also be
	  regular expression metacharacters. This was already being done for '*'
	  but we need to do the same for '+'.

	  In passing, remove some unreachable code - strcmp() is already run
	  immediately when entering extension_matches().

	  ASTERISK-14939 #close
	  Reported by: klaus3000

	  Change-Id: I8d2cccb3479168fba1b0a6704c52198b396468f1

2019-04-11 12:49 +0000 [f91262272e]  Sean Bright <sean.bright@gmail.com>

	* pbx.c: Properly parse labels with leading digits

	  If the target of a Goto is a label that starts with a number, we
	  erroneously treat the leading digits as a priority.

	  ASTERISK-20182 #close
	  Reported by: Janu

	  Change-Id: Ia78408c0805a729103917247ecfc802f6fafc94b

2019-04-10 18:07 +0000 [eec16b8e99]  Alexander Anikin <may213@yandex.ru>

	* chan_ooh323: fix h323 log file path

	  Change h323 log path relative to AST_LOG_DIR instead of
	  /var/log/asterisk hardcoded
	  Add return back error message from OOH323EP initialize

	  ASTERISK-28348 #close

	  Reported by: Dmitry Shubin

	  Change-Id: Ib102dd36bbe6c2a7a4ce6870ae9110d9000d7e98

2019-04-09 16:47 +0000 [acfbfef8ad]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: Fix transport_states ref leak

	  Add missing ao2_ref(transport_state, -1) while iterate on a transport_states
	  container.

	  Change-Id: I40e35b5a339121300c80075c30db47201a6c374e

2019-04-01 14:57 +0000 [ef404fef91]  Ben Ford <bford@digium.com>

	* build: Revise CHANGES and UPGRADE.txt handling.

	  This changes the way that we handle adding changes to CHANGES and
	  UPGRADE.txt. The reason for this is because whenever someone needed to
	  make a change to one of these files and someone else had already done
	  so, you would run into merge conflicts. With this new setup, there will
	  never be merge conflicts since all changes will be documented in the
	  doc/<file>-staging directory. The release script is now responsible for
	  merging all of these changes into the appropriate files.

	  There is a special format that these files have to follow in order to be
	  parsed. The files do not need to have a meaningful name, but it is
	  strongly recommended. For example, if you made a change to pjsip, you
	  may have something like this "res_pjsip_relative_title", where
	  "relative_title" is something more descriptive than that. Inside each
	  file, you will need a subject line for your change, followed by a
	  description. There can be multiple subject lines. The file may look
	  something like this:

	     Subject: res_pjsip
	     Subject: Core

	     A description that explains the changes made and why. The release
	     script will handle the bulleting and section separators!

	     You can still separate with new lines within your
	     description.

	  The headers ("Subject" and "Master-Only") are case sensative, but the
	  value for "Master-Only" ("true" or "True") is not.

	  For more information, check out the wiki page:
	  https://wiki.asterisk.org/wiki/display/AST/CHANGES+and+UPGRADE.txt

	  ASTERISK-28111 #close

	  Change-Id: I19cf4b569321c88155a65e9b0b80f6d58075dd47

2019-04-04 16:02 +0000 [85bbb7a3e8]  Chris-Savinovich <csavinovich@digium.com>

	* config.c: Fix a crash in extconfig parsing

	  When extconfig.conf file is parsed, the code previously searched for
	  character comma without verifying if error (null or blank).  This caused
	  a segmentation error.

	  Change-Id: Id76b452d8f330d11c2742c37232761ad71472a8b

2019-04-03 10:55 +0000 [7e5b4b8616]  Salah Ahmed <txrubel@gmail.com>

	* chan_pjsip: DTMF Mode auto_info fallback lead to both inband and info

	  When the dtmf_mode on an endpoint is configured as "auto_info"
	  Asterisk will produce an inband DTMF tone alongside an INFO
	  message when sending DTMF.

	  ASTERISK-28371

	  Change-Id: I1380b82f006e110a1b83fbb50c9873edd13a5d9a

2019-03-21 18:09 +0000 [d5a318f148]  sungtae kim <sungtae@messagebird.com>

	* main/json.c: Added app_name, app_data to channel type

	  It was difficult to check the channel's current application and
	  parameters using ARI for current channels. Added app_name, app_data
	  items to show the current application information.

	  ASTERISK-28343

	  Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c

2019-04-02 15:49 +0000 [8ec4de7501]  Sebastian Kemper <sebastian_ml@gmx.net>

	* loader: support for permanent dlopen()

	  Asterisk assumes that dlopen() will always run the constructor of a
	  shared library and every dlclose() will run its destructor. But dlopen()
	  may be permanent, meaning the constructor will only be run once, as is
	  the case with musl libc.

	  With a permanent dlopen() the Asterisk module loader does not work
	  correctly, because it's expectations regarding when the constructors and
	  destructors are run are not met. In fact a segmentation fault will occur
	  when the first module is "re-opened" that has AST_MODFLAG_GLOBAL_SYMBOLS
	  set (the dlopen() does not call the constructor, resource_being_loaded
	  is not set to NULL, then strlen is called with NULL instead of a string,
	  see issue ASTERISK-28319).

	  This commit adds code to the loader that will manually run the
	  constructors/destructors of the (non-builtin) modules where needed. To
	  achieve this a new ao2 container (linked list) is started and filled
	  with objects that contain the names of the modules and the pointers to
	  their respective info structs.

	  This behavior can be activated when configuring Asterisk
	  (--enable-permanent-dlopen). By default this is disabled, of course.

	  ASTERISK-28319 #close

	  Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
	  Change-Id: I86693a0ecf25d5ba81c73773a03df4abc3426875

2019-04-03 17:55 +0000 [1464a6b80f]  George Joseph <gjoseph@digium.com>

	* CI:  Add --no-dev-mode option to buildAsterisk.sh

	  The new option disables dev mode, TEST_FRAMEWORK and
	  MALLOC_DEBUG making the build more production-like.

	  Change-Id: Ieb72497d4d91d5416684aaed702cc3f532099738

2019-04-03 10:24 +0000 [8961d9ca8b]  Ben Ford <bford@digium.com>

	* build: Fix compiler warnings/errors.

	  The compiler complained about a couple of variables that weren't
	  initialized but were being used. Initializing them to NULL resolves the
	  warnings/errors.

	  ASTERISK-28362 #close

	  Change-Id: I6243afc5459b416edff6bbf571b0489f6b852e4b

2019-03-27 12:59 +0000 [94eeba6147]  Kevin Harwell <kharwell@digium.com>

	* bridge_softmix: use a float type to store the internal REMB bitrate

	  REMB's exponent is 6-bits (0..63) and has a mantissa of 18-bits. We were using
	  an unsigned integer to represent the bitrate. However, that type is not large
	  enough to hold all potential bitrate values. If the bitrate is large enough
	  bits were being shifted off the "front" of the mantissa, which caused the
	  wrong value to be sent to the browser.

	  This patch makes it so it now uses a float type to hold the bitrate. Using a
	  float allows for all bitrate values to be correctly represented.

	  ASTERISK-28255

	  Change-Id: Ice00fdd16693b16b41230664be5d9f0e465b239e

2019-03-27 14:30 +0000 [ae1aeb930e]  Matthew Fredrickson <creslin@digium.com>

	* res/res_rtp_asterisk: Enable rxjitter calculation for video

	  It looks like we're not properly calculating jitter values on received
	  video streams.  This patch enables the code that does jitter calculations
	  for those streams.

	  Change-Id: Iaac985808829c8f034db8c57318789c4c8c11392

2019-01-26 15:51 +0000 [5815597a21]  sungtae kim <sungtae@messagebird.com>

	* stasis.c: Added topic_all container

	  Added topic_all container for centralizing the topic. This makes more
	  easier to managing the topics.

	  Added cli commands.
	  stasis show topics : It shows all registered topics.
	  stasis show topic <name> : It shows speicifed topic's detail info.

	  ASTERISK-28264

	  Change-Id: Ie86d125d2966f93de74ee00f47ae6fbc8c081c5f

2019-03-02 05:37 +0000 [bbc13b1f1f]  sungtae kim <sungtae@messagebird.com>

	* res/res_ari: Added ARI resource /ari/channels/{channelId}/rtp_statistics

	  Added ARI resource for channel statistics.
	  GET /ari/channels/{channelId}/rtp_statistics : It returns given
	  channel's rtp statistics detail.

	  ASTERISK-28320

	  Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376

2019-03-26 13:07 +0000 [d4cd2a9706]  Sean Bright <sean.bright@gmail.com>

	* pjproject: Add timer patch from pjproject r5934

	  ASTERISK-28161 #close
	  Reported by: Ross Beer

	  Change-Id: I65331d554695753005eaa66c1d5d4807fe9009c8

2019-04-01 14:55 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.3.0-rc1 Released.

2019-03-29 08:07 +0000 [6f5a6072ab]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Fix a few member pause bugs

	  * Always set member->lastpause when setting member->paused

	  * Fixed typo (using member->lastcall instead of member->lastpause) in
	    'queue show' output.

	  * Use a constant 'now' in 'queue show' output for a better point-in-time
	    view of time based stats.

	  ASTERISK-27541 #close
	  Reported by: César Benjamín García Martínez

	  Change-Id: Ib41ced90cfdb66f9bb1e7b263d0f6fc1ac6e18fa

2019-03-26 14:56 +0000 [64279e5992]  Ben Ford <bford@digium.com>

	* alembic: Fix errors during upgrade head.

	  When trying to upgrade using alembic, a couple different errors kept
	  popping up that prevented the upgrade. An additional parameter was
	  needed when changing the schema for mwi_subscribe_replaces_unsolicited
	  from an integer to an enum. When changing from a string to an enum, the
	  type needed to be cast for postgresql. The other issue was a parameter
	  being used during column creation that did not exist.

	  After fixing the upgrade process, it revealed errors with the downgrade
	  process. One was a variable not being defined in the downgrade function,
	  and the other was tables not existing when using MySQL. This was due to
	  a context check that should have encompassed MySQL, but in the end was
	  not doing so.

	  Change-Id: Ib4d70cf3ce5080023a50be496272a777b55d6c8e

2019-03-27 11:03 +0000 [636e301f91]  Ben Ford <bford@digium.com>

	* build: Add staging directories for future changes.

	  This is the first step in changing the release process so that changes
	  made to the CHANGES and UPGRADE.txt files do not result in merge
	  conflicts every time multiple people modify these files. The changes
	  made will go in these new directories: doc/CHANGES-staging and
	  doc/UPGRADE-staging. The README.md files explain how things will work,
	  but here's a little overview. When you make a change that would go in
	  either CHANGES or UPGRADE.txt, this should instead be documented in a
	  new file in the doc/CHANGES-staging or doc/UPGRADE-staging directory,
	  respectively. The format will look like this:

	     Subject: res_pjsip

	     A description that explains the changes made and why. The release
	     script will handle the bulleting and section separators! The
	     'Subject:' header is case-sensitive.

	     You can still separate with new lines within your description.

	     Subject: res_ari
	     Master-Only: true

	     You can have more than one subject, and they don't have to be the
	     same! Also, the 'Master-Only' header should always be true and is
	     also case-sensitive (but the value is not - you can have 'true' or
	     'True'). This header will only ever be present in the master branch.

	  For more information, check out the wiki page:
	  https://wiki.asterisk.org/wiki/display/AST/CHANGES+and+UPGRADE.txt

	  This is an initial change for ASTERISK_28111. Functionally, this will
	  make no difference, but it will prep the directories for when the
	  changes from CHANGES and UPGRADE.txt are extracted.

	  Change-Id: I8d852f284f66ac456b26dcb899ee46babf7d15b6

2019-03-26 16:55 +0000 [3e5b26ae0a]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Fix documentation for QUEUE_MEMBER function.

	  It was a copy/paste of the QUEUE_MEMBER_COUNT function's synopsis.

	  ASTERISK-20986 #close
	  Reported by: Olivier Krief

	  Change-Id: If51ec481feb35824a4e78ab5600b197b819b10be

2019-03-25 06:34 +0000 [4d8cd2efbe]  Joshua Colp <jcolp@digium.com>

	* manager: Use separate lock for session event notification.

	  When notifying a manager session that new events were available
	  the same lock was used that was also held when doing things within
	  the session (such as sending events out). If the manager session
	  blocked for a period of time this would cause a back up of messages
	  in Stasis and would also block any other sessions from receiving
	  events.

	  This change adds a separate lock to the manager session which is
	  strictly used for notifying it that new events are available.

	  ASTERISK-28350

	  Change-Id: Ifbcac007faca9ad0231640f5e82a6ca9228f261b

2019-03-25 18:05 +0000 [e51bd0726b]  Alexei Gradinari <alex2grad@gmail.com>

	* pjsip: restrict function PJSIP_PARSE_URI to parse only SIP/SIPS URIs

	  The next usage of PJSIP_PARSE_URI will crash asterisk
	  ${PJSIP_PARSE_URI(tel:+1234567890,host)}
	  or
	  ${PJSIP_PARSE_URI(192.168.1.1:5060,host)}

	  The function pjsip_parse_uri successfully parses then, but returns
	  struct pjsip_other_uri *.

	  This patch restricts parsing only SIP/SIPS URIs.

	  Change-Id: I16f255c2b86a80a67e9f9604b94b129a381dd25e

2019-03-06 16:21 +0000 [6d455487d9]  sungtae kim <sungtae@messagebird.com>

	* res/res_ari: Added timestamp as a requirement for all ARI events

	  Changed to requirement to having timestamp for all of ARI events.
	  The below ARI events were changed to having timestamp.
	  PlaybackStarted, PlaybackContinuing, PlaybackFinished,
	  RecordingStarted, RecordingFinished, RecordingFailed,
	  ApplicationReplaced, ApplicationMoveFailed

	  ASTERISK-28326

	  Change-Id: I382c2fef58f5fe107e1074869a6d05310accb41f

2019-03-25 14:31 +0000 [d905602a04]  Sean Bright <sean.bright@gmail.com>

	* chan_sip: Ensure 'qualifygap' isn't negative

	  Passing negative intervals to the scheduler rips a hole in the
	  space-time continuum.

	  ASTERISK-25792 #close
	  Reported by: Paul Sandys

	  Change-Id: Ie706f21cee05f76ffb6f7d89e9c867930ee7bcd7

2019-03-25 11:42 +0000 [634314c727]  Alexei Gradinari <alex2grad@gmail.com>

	* res_config_odbc: set empty extended field as a single whitespace

	  If Realtime @ variable value is NULL or empty or contains only whitespaces
	  then when we try to retrieve it using PJSIP_ENDPOINT we get WARNING
	  pjsip_endpoint_function_read: Unknown property @my_var for PJSIP endpoint.
	  And the variable is missing in the result of CLI pjsip show endpoint.

	  This patch keeps empty sorcery extended field.

	  ASTERISK-28341 #close

	  Change-Id: I221fccc04cbfa2be17ce971f64ae0e74e465eea0

2019-03-22 14:46 +0000 [ce5bed44e4]  Matthew Fredrickson <creslin@digium.com>

	* main/taskprocessor: Increase max name length of taskprocessors

	  Since the new names went in, the maximum taskprocessor name is too
	  short.  This patch increases the name field to a length to better
	  handle the new names.

	  Change-Id: I32f32d6926f25c8ef5a91303fd2988d2c2858877

2019-03-14 11:46 +0000 [7bdde83f2c]  George Joseph <gjoseph@digium.com>

	* sorcery.c: Sorcery enhancements for wizard management

	  Added ability to specifiy a wizard is read-only when applying
	  it to a specific object type.  This allows you to specify
	  create, update and delete callbacks for the wizard but limit
	  which object types can use them.

	  Added the ability to allow an object type to have multiple
	  wizards of the same type.  This is indicated when a wizard
	  is added to a specific object type.

	  Added 3 new sorcery wizard functions:

	  * ast_sorcery_object_type_insert_wizard which does the same thing
	    as the existing ast_sorcery_insert_wizard_mapping function but
	    accepts the new read-only and allot-duplicates flags and also
	    returns the ast_sorcery_wizard structure used and it's internal
	    data structure. This allows immediate use of the wizard's
	    callbacks without having to register a "wizard mapped" observer.

	  * ast_sorcery_object_type_apply_wizard which does the same
	    thing as the existing ast_sorcery_apply_wizard_mapping function
	    but has the added capabilities of
	    ast_sorcery_object_type_insert_wizard.

	  * ast_sorcery_object_type_remove_wizard which removes a wizard
	    matching both its name and its original argument string.

	  * The original logic in __ast_sorcery_insert_wizard_mapping was moved
	    to __ast_sorcery_object_type_insert_wizard and enhanced for the
	    new capabilities, then __ast_sorcery_insert_wizard_mapping was
	    refactored to just call __ast_sorcery_insert_wizard_mapping.

	  * Added a unit test to test_sorcery.c to test the read-only
	    capability.

	  Change-Id: I40f35840252e4313d99e11dbd80e270a3aa10605

2019-03-10 17:53 +0000 [9e36707dca]  sungtae kim <sungtae@messagebird.com>

	* res/res_stasis: Fixed wrong StasisEnd timestamp

	  Because StasisEnd's timestamp created it's own timestamp, it makes
	  wrong timestamp, compare to other channel event(ChannelDestroyed).
	  Fixed to getting a timestamp from the Channel's timestamp.

	  ASTERISK-28333

	  Change-Id: I5eb8380fc472f1100535a6bc4983c64767026116

2019-03-14 09:55 +0000 [057c7380be]  Sean Bright <sean.bright@gmail.com>

	* vector: Add AST_VECTOR_COMPACT() to reclaim wasted space

	  This might be useful in situations where you are loading an undetermined number
	  of items into a vector and don't want to keep (potentially) 2x the necessary
	  memory around indefinitely.

	  Change-Id: I9711daa0fe01783fc6f04c5710eba84f2676d7b9

2019-03-14 11:53 +0000 [0426e0fede]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Fix printf type mismatch

	  A size_t is not always an unsigned long.

	  * Use the %zu format specifier in the ast_cli() printf format string since
	  AST_VECTOR_SIZE() returns a size_t value.

	  Change-Id: Ib102dd36bbe6c2a7a4ce6870ae9110d978dd7e98

2019-03-08 09:40 +0000 [f5f977baec]  George Joseph <gjoseph@digium.com>

	* app.c:  Remove deletion of pool topic on mwi state delete

	  As part of an earlier voicemail refactor, ast_delete_mwi_state_full
	  was modified to remove the pool topic for a mailbox when the state
	  was deleted.  This was an attempt to prevent stale topics from
	  accumulating when app_voicemail was reloaded and a mailbox went
	  away.  Unfortunately because of the fact that when app_voicemail
	  reloads, ALL mailboxes are deleted then only current ones recreated,
	  topics were being removed from the pool that still had subscribers
	  on them, then recreated as new topics of the same name.  So now
	  modules like res_pjsip_mwi are listening on a topic that will
	  never receive any messages because app_voicemail is publishing on
	  a different topic that happens to have the same name.  The solutiuon
	  to this is not easy and given that accumulating topics for
	  deleted mailboxes is less evil that not sending NOTIFYs...

	  * Removed the call to stasis_topic_pool_delete_topic in
	    ast_delete_mwi_state_full.

	  Also:

	  * Fixed a topic reference leak in res_pjsip_mwi
	    mwi_stasis_subscription_alloc.

	  * Added some debugging to mwi_stasis_subscription_alloc,
	    stasis_topic_create, and topic_dtor.

	  * Fixed a topic reference leak in an error path in
	    internal_stasis_subscribe.

	  ASTERISK-28306
	  Reported-by: Jared Hull

	  Change-Id: Id7da0990b3ac4be4b58491536b35f41291247b27

2019-03-09 08:39 +0000 [342550e0ea]  cirillor <cirillor@lbv.org.br>

	* Variable ALTCONF ignored when service is used in Debian

	  When variable ALTCONF is defined, the command start prints the message
	  "Unable to open specified master config file '"/etc/asterisk/asteris..."
	  and use default configurations.

	  ASTERISK-28332

	  Change-Id: I7595e582a0ee2c1051ea35435e247e27906957ef

2019-03-13 06:05 +0000 [03c0d19cc8]  Joshua Colp <jcolp@digium.com>

	* stasis: Allow empty application arguments to move.

	  Change-Id: I1e4d37415f3034abe36496dc30209c2303e6af5c

2019-03-12 15:54 +0000 [6a435723f7]  Kevin Harwell <kharwell@digium.com>

	* AMI/ARI: Bump non-breaking version numbers

	  Increasing the non-breaking AMI and ARI version numbers due to changes and
	  additions in those API's. Note, some changes may be forthcoming (will be added
	  between now and the next release of Asterisk), thus not listed here. As well
	  a few changes listed below may have been released in a previous release of
	  Asterisk, but the API version numbers were not increased at that time, so
	  including here.

	  AMI:

	   * app_queue: set the wrapuptime from AddQueueMember application - e806990
	   * res_pjsip: option for ContactStatus event updates - 7f22c9f

	  ARI:

	   * bridging: Add creation timestamps - 0d70120
	   * res_stasis: Add ability to switch applications - 50a4b61
	   * ARI event type filtering - 1c5def4
	   * Added ARI resource /ari/asterisk/ping - 19fc99a

	  ASTERISK-28314

	  Change-Id: Iebc813840f8230afa6b20579772e15549064b787

2019-03-12 13:25 +0000 [a71ae3dc44]  George Joseph <gjoseph@digium.com>

	* Makefile.moddir_rules: Pass PJPROJECT_BUNDLED to download_externals

	  The download_externals script wasn't getting the PJPROJECT_BUNDLED
	  environment variable passed down to it so it wasn't downloading
	  the appropriate variant of res_digium_phone.  This could cause
	  crashes in the DPMA.

	  Change-Id: I5daa9369c7af1fd556d892e89a85f279a2533425

2019-03-07 13:48 +0000 [47c853f8e1]  Chris-Savinovich <csavinovich@digium.com>

	* partial-inlining: disable partial-inlining if gcc>=8.2.1

	  Apply flag -fno-partial-inlining on default optimization if and only if
	  gcc version >= 8.2.1 (this is the current ver on Fedora and Ubuntu).
	  This is done to avoid a bug that causes arithmetic calculations to fail
	  if the following conditions are met:
	  1. TEST_FRAMEWORK on
	  2. DONT_OPTIMIZE off
	  3. Fedora and Ubuntu
	  4. GCC 8.2.1
	  5. There must exist a certain combination of multithreading.
	  6. Optimization level -O2 and -O3
	  7. Flag -fpartial-inline activated (default when optimization level>=2)
	  The following link points to a similar gcc bug reported in 2015. This leads me
	  to believe the bug has regressed. Note I am not able to replicate this bug
	  in an environment other than Asterisk + Test Framework + Test_cel because the
	  multithreading combination that causes it seems to be unique. Therefore I
	  am temporarily abandoning any thoughts of reporting the new occurrence of this
	  bug to gcc.gnu.org.  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65307

	  Change-Id: Ibd1afe60e0a38b88e85fdcd9b051004601c2f102

2019-03-07 06:28 +0000 [b886fef66e]  Joshua Colp <jcolp@digium.com>

	* stasis: Improve topic/subscription names and statistics.

	  Topic names now follow: <subsystem>:<functionality>[/<object>]

	  This ensures that they are all unique, and also provides better
	  insight in to what each topic is for.

	  Subscriber ids now also use the main topic name they are
	  subscribed to and an incrementing integer as their identifier to
	  make it easier to understand what the subscription is primarily
	  responsible for.

	  Both the CLI commands for listing topic and subscription statistics
	  now sort to make it a bit easier to see what is going on.

	  Subscriptions will now show all topics that they are receiving messages
	  from, not just the main topic they were subscribed to.

	  ASTERISK-28335

	  Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d

2019-03-03 09:20 +0000 [ca8f254f0f]  sungtae kim <sungtae@messagebird.com>

	* res/res_rtp_asterisk.c: Fixing possible divide by zero

	  Currently, when the Asterisk calculates rtp statistics, it uses
	  sample_count as a unsigned integer parameter. This would be fine
	  for most of cases, but in case of large enough number of sample_count,
	  this might be causing the divide by zero error.

	  ASTERISK-28321

	  Change-Id: If7e0629abaceddd2166eb012456c53033ea26249

2019-03-05 08:15 +0000 [c9459b1875]  cirillor <cirillor@lbv.org.br>

	* chan_dahdi: Add logical group at DAHDIChannel event and CHANNEL function

	  Add logical group at DAHDIChannel event
	  and create "dahdi_group" at CHANNEL function.

	  ASTERISK-28317

	  Change-Id: Ic1f834cd53982a9707a9748395ee746d6575086a

2019-03-08 14:12 +0000 [8ca74d73f1]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Remove redundant option parsing

	  Change-Id: I481fabd8eaf2e4e7ffb5c8285b294742826e7d12

2019-03-04 01:50 +0000 [4ca41caf38]  Torrey Searle <torrey@voxbone.com>

	* chan_pjsip: add a flag to ignore 183 responses if no SDP present

	  chan_sip will always ignore 183 responses that do not contain SDP
	  however, chan_pjsip will currently always translate it into a
	  183 with SDP.  This new flag allows chan_pjsip to have the same
	  behavior as chan_sip.

	  ASTERISK-28322 #close

	  Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a

2019-03-07 17:17 +0000 [641b6041c7]  Corey Farrell <git@cfware.com>

	* jansson: json_pack with new format to verify required runtime version.

	  Add a json_pack at startup that will fail if runtime links against a
	  library older than jansson-2.11.

	  Change-Id: I101aebafe0f9407650206f7c552dad3d69377b5a

2019-03-07 17:15 +0000 [5b5aa05bd9]  Sean Bright <sean.bright@gmail.com>

	* app_meetme: Don't mute joining admins if conference is muted

	  ASTERISK-28328 #close

	  Change-Id: I4f6069fb34923b7521520c2a205a1e56227e592b

2019-03-06 15:04 +0000 [4860954540]  Sean Bright <sean.bright@gmail.com>

	* Replace calls to strtok() with strtok_r()

	  strtok() uses a static buffer, making it not thread safe.

	  Change-Id: Icce265153e1e65adafa8849334438ab6d190e541

2019-03-07 16:05 +0000 [90f06ad169]  Sean Bright <sean.bright@gmail.com>

	* samples: Fix comment typo in pjsip.conf.sample

	  Change-Id: I84a45c3d9fd26ca61aca99927eec83b57f1de857

2019-03-07 07:41 +0000 [50a4b618fc]  Ben Ford <bford@digium.com>

	* res_stasis: Add ability to switch applications.

	  Added the ability to move between Stasis applications within Stasis.
	  This can be done by calling 'move' in an application, providing (at
	  minimum) the channel's id and the application to switch to. If the
	  application is not registered or active, nothing will happen and the
	  channel will remain in the current application, and an event will be
	  triggered to let the application know that the move failed. The event
	  name is "ApplicationMoveFailed", and provides the "destination" that the
	  channel was attempting to move to, as well as the usual channel
	  information. Optionally, a list of arguments can be passed to the
	  function call for the receiving application. A full example of a 'move'
	  call would look like this:

	  client.channels.move(channelId, app, appArgs)

	  The control object used to control the channel in Stasis can now switch
	  which application it belongs to, rather than belonging to one Stasis
	  application for its lifetime. This allows us to use the same control
	  object instead of having to tear down the current one and create
	  another.

	  ASTERISK-28267 #close

	  Change-Id: I43d12b10045a98a8d42541889b85695be26f288a

2019-03-06 07:20 +0000 [e7dd4bd4a9]  Dömsödi Gergely <doome@uhusystems.com>

	* app_queue: fix ring_entry to access nativeformats with a channel lock

	  Fixes an intermittent segmentation fault which occured when accessing
	  nativeformats of a channel which entered into a queue.

	  ASTERISK-27964
	  Reported by: Francisco Seratti

	  Change-Id: Ic87fa7a363f3b487c24ce07032f4b2201c22db9e

2019-03-04 16:05 +0000 [88681ba9bb]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Handle empty 'interface' in queue member config

	  While the 'interface' column is a NOT NULL, the empty string is still
	  allowed. res_config_odbc treats the empty string as a NULL and we crash
	  when trying to dereference.

	  Also cleaned up an adjacent error message for consistency.

	  ASTERISK-28168 #close

	  Change-Id: I55e012b540fbcda99bb40bede3099b7ae5db8202

2019-03-04 12:36 +0000 [0cfafb89b5]  Sean Bright <sean.bright@gmail.com>

	* sip_to_pjsip: Make multiline comment parsing consistent with Asterisk

	  In Asterisk configuration, a multiline comment starts with ;-- as long as it is
	  not followed by another dash (i.e. ;--- is not a multiline comment).

	  ASTERISK-28323 #close

	  Change-Id: I32dc38e0fac01d3c0805d27d35d2365a7c37ca72

2019-02-28 06:24 +0000 [6a714c0e9f]  Joshua Colp <jcolp@digium.com>

	* basic-pbx: Update configuration to work with current modules.

	  The res_pjsip_websocket module requires the res_http_websocket
	  module so ensure it is loaded. As well the res_pjsip_notify
	  module needs the pjsip_notify.conf configuration file so
	  ensure it is installed.

	  ASTERISK-28272

	  Change-Id: I261659b84e7a6ac4cb49990d9badb4b2ad01bacd

2019-02-08 15:32 +0000 [0d7012044a]  sungtae kim <sungtae@messagebird.com>

	* bridging: Add creation timestamps

	  This small feature will help to checking the bridge's status to
	  figure out which bridge is in old/zombie or not. Also added
	  detail items for the 'bridge show *' cli to provide more detail
	  info. And added creation item to the ARI as well.

	  ASTERISK-28279

	  Change-Id: I460238c488eca4d216b9176576211cb03286e040

2019-03-01 15:17 +0000 [63a3321c46]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* CHANGES: Document addition of 'wrapuptime' argument to AddQueueMember()

	  Change-Id: Ieb332d018ae3f2fc82b9465381fde0f299af1611

2019-02-28 10:01 +0000 [ffe07772e6]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_diversion: Use static pj_str_t for Diversion header names

	  PJSIP assumes that these header names are not allocated, and does not
	  clone the name strings when reusing headers.

	  Block unload of res_pjsip_diversion until shutdown to ensure static
	  memory stays valid.

	  ASTERISK-28312 #close

	  Change-Id: Ibd6ea55ec4a604bbd43ac07f8d0b54da2c39b8b9

2019-02-28 15:36 +0000 [625af27a28]  Sean Bright <sean.bright@gmail.com>

	* menuselect: Add license header to menuselect_gtk.c

	  This file was added to the Subversion repository on 2007-03-15 by
	  Russell Bryant, a Digium employee at the time.

	  ASTERISK-24173 #close

	  Change-Id: Ie866fa9d31d550467613d362b35b03c031ee594d

2019-01-30 13:25 +0000 [61585af9bd]  George Joseph <gjoseph@digium.com>

	* res_pjsip_sdp_rtp:  Fix return code from apply_negotiated_sdp_stream

	  apply_negotiated_sdp_stream was returning a "1" when no joint
	  capabilities were found on an outgoing call instead of a "-1".
	  This indicated to res_pjsip_session that the handler DID handle
	  the sdp when in fact it didn't.  Without the appropriate setup,
	  a subsequent media frame coming in would have an invalid stream_num
	  and cause a seg fault when the stream was attempted to be retrieved.

	  apply_negotiated_sdp_stream now returns the correct "-1" and any
	  media is now discarded before it reaches the core stream processing.

	  ASTERISK-28260
	  Reported by: Sotiris Ganouris

	  Change-Id: Ia095cb16b4862f2f6ad6d2d2a77453fa2542371f

2019-02-28 06:51 +0000 [6f1c0e787c]  Sean Bright <sean.bright@gmail.com>

	* Revert "pjsip_message_filter: Only do interface lookup for wildcard addresses."

	  This reverts commit d524ad523d0d32babba309810b5bccd09cb7f467.

	  Reason for revert: This causes Contact and Via headers to have the wrong
	  transport address.

	  ASTERISK-28309 #close

	  Change-Id: Ibba4d6176f68e39279fcd9a545f81d56e747bed8

2019-02-27 19:52 +0000 [fe694de299]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_config_wizard: Don't crash if misconfigured

	  If both send_registrations and send_auth are both set to yes,
	  outbound_auth/username must be set or we crash.

	  ASTERISK-27992 #close

	  Change-Id: I6418d56de1ae53f80393b314c2584048fbf7f11d

2019-02-27 19:09 +0000 [edf31624a2]  Sean Bright <sean.bright@gmail.com>

	* res_config_odbc: Avoid deadlock when max_connections = 1

	  Rather than calling ast_odbc_find_table() in the prepare callback, call
	  it beforehand and pass it in to the callback to avoid the need for a
	  second connection.

	  ASTERISK-28166 #close

	  Change-Id: I6f8a0b9990d636fd6bc1a92ed70f7050d2436202

2019-02-20 11:03 +0000 [b3ebb51086]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_registrar: blocked threads on reliable transport shutdown take 3

	  When a contact was removed by the registrar it did not always check to see if
	  the circumstances involved a monitored reliable transport. For instance, if the
	  'remove_existing' option was set to 'true' then when existing contacts were
	  removed due to 'max_contacts' being reached, those existing contacts being
	  removed did not unregister the transport monitor.

	  Also, it was possible to add more than one monitor on a reliable transport for
	  a given aor and contact.

	  This patch makes it so all contact removals done by the registrar also remove
	  any associated transport monitors if necessary. It also makes it so duplicate
	  monitors cannot be added for a given transport.

	  ASTERISK-28213

	  Change-Id: I94b06f9026ed177d6adfd538317c784a42c1b17a

2019-02-27 10:37 +0000 [6e8cba39a4]  George Joseph <gjoseph@digium.com>

	* CI: Update jenkinsfiles with new Gerrit URLs

	  The recent upgrade of Gerrit to 2.16 elimiated referencing a
	  repository in a way the jenkinsfiles were relying on so
	  the URL references were changed to a more consistent and supported
	  format.

	  Change-Id: I2e8e3f213b9a96bb1b27665eca4a9a24bc49820e
	  (cherry picked from commit 5ce084579f897096163b4e0c2ed4e8e1a8558cca)

2019-02-20 13:15 +0000 [8402189892]  George Joseph <gjoseph@digium.com>

	* res_mwi_devstate.c: New module to allow presence subs to VM boxes

	  This module allows presence subscriptions to voicemail boxes.  This
	  allows common BLF keys to act as voicemail waiting indicators.

	  ASTERISK-28301

	  Change-Id: I62a246c24f3d7d432e33e22d7a4a57c15c292fdd

2019-02-25 09:41 +0000 [5b8db4e422]  Torrey Searle <torrey@voxbone.com>

	* res/res_rtp_asterisk: smoother can cause wrong timestamps if dtmf happen

	  Delivery timeval in the smoother object will fall behind while a DTMF is
	  being generated.  This can eventually lead to invalid rtp timestamps.
	  To prevent this from happening the smoother needs to be reset after every
	  DTMF to keep the timing up to date.

	  ASTERISK-28303 #close

	  Change-Id: Iaba3f7b428ebd72a4caa90e13b829ab4f088310f

2019-02-25 15:32 +0000 [cab8a76ae3]  Kevin Harwell <kharwell@digium.com>

	* rest-api-templates/asterisk_processor - replace http line breaks with line feed

	  Including line breaks (<br>, <br/>, <br />) in certain parts of the rest-api
	  json definition (e.g. summary, notes) displays them correctly in swagger.
	  However, when the field gets converted to the wiki format those breaks get
	  escaped and show up in the text as the actual string literal "<br>" etc...

	  This patch makes it so when converting to the wiki format it replaces all line
	  break values (<br>, etc...) with line feeds ('\n').

	  Change-Id: Ie1c9faa0d1c5d622804cc0a21ce769095b08aa3d

2019-02-25 06:10 +0000 [9905cccb7b]  Joshua C. Colp <jcolp@digium.com>

	* res_ari_applications: Fix incorrect call to ao2_lock.

	  When listing the applications the apps lock was incorrectly
	  locked twice instead of being locked and then unlocked.

	  ASTERISK-28302

	  Change-Id: If7d064592a9e88c0f1049214c50e02be6dabf79e

2019-02-21 12:06 +0000 [0896e4cdc6]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Allow only single ssrc attribute.

	  When processing SSRC attributes we were iterating through
	  all of them, even though we only need to know the remote
	  SSRC once. This was problematic because some browsers group
	  SSRCs together on a stream, and due to our negotiation only
	  end up using the first one. Since we set the second one as
	  the remote SSRC we would drop the received media from them
	  instead of allowing it through.

	  In the future this may be extended to allow SSRC groups
	  and to use information from the attributes.

	  Change-Id: I4dc87087dbe56a83aa65f0f897bbd4ca75ec1270

2019-01-09 04:27 +0000 [a1391aa26b]  Sungtae Kim <sungtae@messagebird.com>

	* http.c: Support separated HTTP request

	  Currently, the Asterisk does not support seperated HTTP request.
	  This patch make the Asterisk enables to wait lest part of HTTP request.
	  Also increases acceptable HTTP body length to 40k to support more
	  larger request.

	  ASTERISK-28236

	  Change-Id: I48a401aa64a21c3b37bf3cb4e0486d64b7dd8aa1

2019-02-20 12:48 +0000 [bb8903b00e]  George Joseph <gjoseph@digium.com>

	* Core:  Increase AST_PBX_MAX_STACK to 512 if not LOW_MEMORY

	  The current settings AST_PBX_MAX_STACK is 128 entries which is
	  too low for some FreePBX installations with complex parking
	  arrangements.  Increased to 512 if LOW_MEMORY is not defined.

	  ASTERISK-28300

	  Change-Id: I7c4b540bc92e6642df0f3da639b003f7da8b1299

2019-02-20 12:22 +0000 [4b6c60b362]  Joshua C. Colp <jcolp@digium.com>

	* stasis: Store subscriber uniqueids with topic statistics.

	  This change provides an easier mechanism to determine which
	  subscribers are subscribed to a topic. Using this you can
	  inspect the specific subscribers for further details.

	  Change-Id: I8deea21703cd5c5357b85593b46c3eaf24e18c0c

2019-02-15 12:53 +0000 [2f8def1453]  George Joseph <gjoseph@digium.com>

	* taskprocessor:  Enable subsystems and overload by subsystem

	  To prevent one subsystem's taskprocessors from causing others
	  to stall, new capabilities have been added to taskprocessors.

	  * Any taskprocessor name that has a '/' will have the part
	    before the '/' saved as its "subsystem".
	    Examples:
	    "sorcery/acl-0000006a" and "sorcery/aor-00000019"
	    will be grouped to subsystem "sorcery".
	    "pjsip/distributor-00000025" and "pjsip/distributor-00000026"
	    will bn grouped to subsystem "pjsip".
	    Taskprocessors with no '/' have an empty subsystem.

	  * When a taskprocessor enters high-water alert status and it
	    has a non-empty subsystem, the subsystem alert count will
	    be incremented.

	  * When a taskprocessor leaves high-water alert status and it
	    has a non-empty subsystem, the subsystem alert count will be
	    decremented.

	  * A new api ast_taskprocessor_get_subsystem_alert() has been
	    added that returns the number of taskprocessors in alert for
	    the subsystem.

	  * A new CLI command "core show taskprocessor alerted subsystems"
	    has been added.

	  * A new unit test was addded.

	  REMINDER: The taskprocessor code itself doesn't take any action
	  based on high-water alerts or overloading.  It's up to taskprocessor
	  users to check and take action themselves.  Currently only the pjsip
	  distributor does this.

	  * A new pjsip/global option "taskprocessor_overload_trigger"
	    has been added that allows the user to select the trigger
	    mechanism the distributor uses to pause accepting new requests.
	    "none": Don't pause on any overload condition.
	    "global": Pause on ANY taskprocessor overload (the default and
	    current behavior)
	    "pjsip_only": Pause only on pjsip taskprocessor overloads.

	  * The core pjsip pool was renamed from "SIP" to "pjsip" so it can
	    be properly grouped into the "pjsip" subsystem.

	  * stasis taskprocessor names were changed to "stasis" as the
	    subsystem.

	  * Sorcery core taskprocessor names were changed to "sorcery" to
	    match the object taskprocessors.

	  Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56

2019-02-08 14:21 +0000 [1c5def4b18]  Kevin Harwell <kharwell@digium.com>

	* ARI event type filtering

	  Event type filtering is now enabled, and configurable per application. An app is
	  now able to specify which events are sent to the application by configuring an
	  allowed and/or disallowed list(s). This can be done by issuing the following:

	  PUT /applications/{applicationName}/eventFilter

	  And then enumerating the allowed/disallowed event types as a body parameter.

	  ASTERISK-28106

	  Change-Id: I9671ba1fcdb3b6c830b553d4c5365aed5d588d5b

2018-12-11 08:15 +0000 [e806990be2]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: Enable set the wrapuptime from AddQueueMember application

	  This change add ability to set the wrapuptime per-member using the
	  AddQueueMember application.

	  The feature to set wrapuptime per member was include in the issue
	  ASTERISK-27483 for static member by configuration file and was not
	  added to set from AddQueueMember.

	  ASTERISK-28055 #close

	  Change-Id: I7c7ee4a6f804922cd7c42cb02eea26eb3806c6cf

2019-02-14 17:09 +0000 [08ba504e99]  sungtae kim <sungtae@messagebird.com>

	* chan_pjsip: Changed to continued after invalid media for pjsip show channelstats

	  Currently, the pjsip show channelstats cli does not show channel's
	  stats after hits the invalid channel info. This makes hard to use
	  this cli. Changed to keep iterate after hits the invalid channel
	  info.

	  ASTERISK-28292

	  Change-Id: I3efdff1c9e1b1efd3c971fb82ae77aa133a6f43c

2019-01-22 06:02 +0000 [3fe40c0c05]  Sungtae Kim <sungtae@messagebird.com>

	* res_pjsip_session Added rtcp stats result vector into the session

	  Currently, the Asterisk's pjsip_session module does not keeping the
	  rtcp's stats info after it was removed. But by adding the results
	  vector and keeping it until session is destroying, it can give more
	  useful information for other modules.

	  ASTERISK-28253

	  Change-Id: Ib25c2d3fc4da084aecfde2a82c1b1d733bd64fa5

2019-02-19 10:06 +0000 [3a2db0ee04]  Joshua Colp <jcolp@digium.com>

	* CI: Use tmpfs option to Docker instead of mount.

	  Some tests require Asterisk to execute scripts which
	  are stored in /tmp. When mount is used for tmpfs there
	  is no ability to allow scripts to be executed from
	  that location.

	  This change switches to using tmpfs which can be told
	  to allow executables to be run from /tmp.

	  Change-Id: I0e598ca2b76af1f7f2d29f0da7b1731a214a291a

2019-02-08 14:12 +0000 [e85f92f37a]  Kevin Harwell <kharwell@digium.com>

	* json.c/strings.c - Add a couple of utility functions

	  Added 'ast_json_object_string_get' to the JSON wrapper in order to make it a
	  little easier to retrieve a string field from the JSON object.

	  Also added an 'ast_strings_equal' function that safely checks (checks for NULLs)
	  for equality between two strings.

	  Change-Id: I26f0a16d61537505eb41b4b05ef2e6d67fc2541b

2019-02-12 03:50 +0000 [01b781b4dc]  Torrey Searle <torrey@voxbone.com>

	* res/res_rtp_asterisk: clear smoother when local bridging

	  p2p_write updates txformat but doesn't require a smoother.  If a smoother
	  was created by another bridge type the smoother could fall out of date causing
	  one way audio issues.  To prevent this the smoother is now destroyed on the
	  start of native bridge.

	  ASTERISK-28284 #close

	  Change-Id: I84e67f144963787fff9b4d79ac500514fb40cdc6

2019-02-14 10:54 +0000 [b327b0bbda]  Chris Savinovich <csavinovich@digium.com>

	* Revert "Test_cel: Fails when DONT_OPTIMIZE is off"

	  This reverts commit 05b79d16ab93b038b39412e2570a21205eb499c4.

	  Change-Id: I2e64fc22c33b10cfd592681732fc67ae0669a301

2019-02-07 09:52 +0000 [1084b6e1a1]  Joshua Colp <jcolp@digium.com>

	* ci: Rerun unit tests when non-code changes occur.

	  This change makes it so that even if non-code changes
	  occur (such as commit message changing) unit tests
	  will still be run and result in a verification.

	  ASTERISK-28251

	  Change-Id: I6491fff7c93e5d5cd8e41054486968bf66c4f608

2019-02-07 09:23 +0000 [2cf3931379]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_registrar: lock transport monitor when setting 'removing' flag

	  A previous patch attempt to mitigate blocked threads on transport shutdown for
	  a given contact. It was thought that a second lock could be avoided by checking
	  the 'removing' flag on the transport monitor twice (once before and once after
	  the normal named aor locking). However as with usual threading issues if the
	  timing was right the original problem still occured.

	  This patch adds locking around the first 'removing' flag check and set, thus
	  nullifying the secondary check, so it was removed.

	  ASTERISK-28213

	  Change-Id: Iaa8e36e5311789549b76d8de42dfcea96013b2ed

2019-02-06 06:16 +0000 [44254d548b]  Joshua Colp <jcolp@digium.com>

	* res_odbc: Add basic query logging.

	  When Asterisk is connected and used with a database the response
	  time of the database can cause problems in Asterisk if it is long.
	  Normally the only way to see this problem would be to retrieve a
	  backtrace from Asterisk and examine where things are blocked, or
	  examine the database to see if there is any indication of a
	  problem.

	  This change adds some basic query logging to make it easier to
	  investigate such a problem. When logging is enabled res_odbc will
	  now keep track of the number of queries executed, as well as the
	  query that has taken the longest time to execute. There is also
	  an option which will cause a WARNING message to be output if a
	  query takes longer than a configurable amount of time to execute.

	  This makes it easier and clearer for users that their database may
	  be experiencing a problem that could impact Asterisk.

	  ASTERISK-28277

	  Change-Id: I173cf4928b10754478a6a8c27dfa96ede0f058a6

2018-12-05 16:09 +0000 [e3e3027092]  Sungtae Kim <pchero21@gmail.com>

	* main/cdr: Fixed cdr start overwriting

	  The CDR was overwriting the start time when the call continued the
	  dialplan from the ARI stasis or a Local channel was originated.

	  This change fixes this by no longer reinitializing the CDR when
	  transitioning out of the dialed pending state to the single state.

	  ASTERISK-28181

	  Change-Id: I921bc04064b6cff1deb2eea56a94d86489561cdc

2019-02-04 13:55 +0000 [f29da72969]  Sean Bright <sean.bright@gmail.com>

	* sounds: Sort 'core show sounds' output

	  Change-Id: Ib39052a745040f75eb635f15a042da15b20e22ab

2019-02-06 11:08 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.2.0-rc1 Released.

2018-11-19 18:44 +0000 [419db481d1]  Giuseppe Sucameli <sucameli@netresults.it>

	* Fix deadlock handling subscribe req during res_parking reload

	  Split destroy_hint method to separate hint removal and extension hint
	  state changed callback, the latter now called via stasis.
	  This avoids deadlock between res_parking reload that is removing the
	  parking lot and the related hint and subscribe requests coming for the
	  same parking lot.

	  ASTERISK-28173

	  Change-Id: I5b03c3455b3b12b6f83cea4cc34f4b4b20444f7e

2019-01-28 17:21 +0000 [19fc99a2fb]  sungtae kim <sungtae@messagebird.com>

	* Added ARI resource /ari/asterisk/ping

	  Added ARI resource.
	  GET /ari/asterisk/ping : It returns "pong" message with timestamp
	  and asterisk id. It would be useful for simple heath check.

	  Change-Id: I8d24e1dcc96f60f73437c68d9463ed746f688b29

2019-01-29 10:48 +0000 [1051e1dd18]  Ben Ford <bford@digium.com>

	* res_stasis: Auto-create context and extens on Stasis app launch.

	  At AstriCon, there was a strong desire for the ability to completely
	  bypass dialplan when using ARI. This is possible through the automatic
	  creation of a context and a couple of extensions whenever an application
	  is started.

	  For example, if you have an application named 'ari-example', a context
	  named 'stasis-ari-example' will be automatically created whenever this
	  application is started as long as one does not already exist. Two
	  extensions (a match-all extension for Stasis and a 'h' extension) are
	  created within this context. Any endpoint that registers to Asterisk
	  within this context will send all calls to the corresponding Stasis
	  application. When the application is destroyed, the context is removed.

	  ASTERISK-28104 #close

	  Change-Id: Ie35bd93075e05b05e3ae129a83c9426931b7ebac

2019-02-04 07:09 +0000 [70fa6e6955]  George Joseph <gjoseph@digium.com>

	* bundled-jansson:  On OpenSuse Leap libjansson.a was placed in lib64

	  On OpenSuse Leap, libjansson.a is installed in
	  third-party/jansson/dest/lib64 instead of lib (which is where
	  the top-level makeopts looks).  This causes a link failure.

	  * Updated jansson/Makefile to add an explicit --libdir to force
	    the installation to third-party/jansson/dest/lib.

	  ASTERISK-28271
	  Reported by: David Wilcox

	  Change-Id: Ibf8af75e5da13562105fcc39ed898c6ef0b5a5f3

2019-01-15 17:20 +0000 [9c3b4dcf80]  Kevin Harwell <kharwell@digium.com>

	* pjsip/config_global: regcontext context not created

	  The context specified by 'regcontext' was not being created, so when Asterisk
	  attempted to later dynamically add an extension it would fail. This patch now
	  creates the context if a 'regcontext' is specified.

	  ASTERISK-28238

	  Change-Id: I0f36cf4ab0a93ff4b1cc5548d617ecfd45e09265

2019-01-22 09:02 +0000 [603143bd5a]  George Joseph <gjoseph@digium.com>

	* media_index.c: Refactored so it doesn't cache the index

	  Testing revealed that the cache added no benefit but that it could
	  consume excessive memory.

	  Two new index related functions were created:
	  ast_sounds_get_index_for_file() and ast_media_index_update_for_file()
	  which restrict index updating to specific sound files.

	  The original ast_sounds_get_index() and ast_media_index_update()
	  calls are still available but since they no longer cache the results
	  internally, developers should re-use an index they may already have
	  instead of calling ast_sounds_get_index() repeatedly.  If information
	  for only a single file is needed, ast_sounds_get_index_for_file()
	  should be called instead of ast_sounds_get_index().

	  The media_index directory scan code was elimininated in favor of
	  using the existing ast_file_read_dirs() function.

	  Since there's no more cache, ast_sounds_index_init now only
	  registers the sounds cli commands instead of generating the
	  initial index and subscribing to stasis format register/unregister
	  messages.

	  "sounds" is no longer a valid target for the "module reload"
	  command.

	  Both the sounds cli commands and the sounds ari resources were
	  refactored to only call ast_sounds_get_index() once per invocation
	  and to use ast_sounds_get_index_for_file() when a specific sound
	  file is requested.

	  Change-Id: I1cef327ba1b0648d85d218b70ce469ad07f4aa8d

2019-01-25 12:27 +0000 [f6452f9656]  Kevin Harwell <kharwell@digium.com>

	* codecs.conf.sample: update codec opus docs

	  The option value "sdp" for some of the settings was removed a while back,
	  however the sample conf was not updated.

	  This patch removes any wording with regards to the old "sdp" option value,
	  and adjusts the defaults to what they are now.

	  ASTERISK-28263

	  Change-Id: I41bfa44e9f69446bcc5c8fd92e3675c676fdc445

2019-01-22 09:24 +0000 [c1da2e94a3]  eyalhasson <eyal@kolhl.com>

	* format_g726: add support for seeking

	  Added support for the seek function in format_g726
	  so playback can start from anywhere.
	  Before the fix, playback of g726 files
	  always started from the beginning.

	  ASTERISK-28246

	  Change-Id: I626235bc4642df1479050d3d06828412603a9b40

2019-01-23 07:59 +0000 [d3a6714158]  Jean Aunis <jean.aunis@prescom.fr>

	* build : Fix cross-compilation errors

	  Bundled pjproject and jansson must be configured with the host and build
	  parameters provided to the configure script.
	  Autotools do not permit to check for the existence of local header files, so
	  the control of hrirs.h must not be done when cross-compiling.

	  ASTERISK-28250

	  Change-Id: If0a76e52a87d4ab82b7d4c72d27d8759ca931880

2019-01-23 04:45 +0000 [907d71b551]  Jeremy Lainé <jeremy.laine@m4x.org>

	* res_http_websocket: ensure control frames do not interfere with data

	  Control frames (PING / PONG / CLOSE) can be received in the middle of a
	  fragmented message. In order to ensure they do not interfere with the
	  reassembly buffer, we exit early and do not return the payload to the
	  caller.

	  ASTERISK-28257 #close

	  Change-Id: Ia5367144fe08ac6141bba3309517a48ec7f013bc

2018-12-16 06:43 +0000 [f6cf837aed]  Xiemin Chen <chenxiemin@gmail.com>

	* bridge_softmix: Use MSID:LABEL metadata as the cloned stream's appendix

	  To avoid the stream name collide if there're more than one video track
	  in one client. If client has multi video tracks, the name of ast_stream
	  which represents each video track may be the same. Use the MSID:LABEL
	  here because it's identifiable.

	  ASTERISK-28196 #close
	  Reported-by: xiemchen

	  Change-Id: Ib62b2886e8d3a30e481d94616b0ceaeab68a870b

2019-01-22 15:03 +0000 [735bd4d185]  Gerald Schnabel <gs@starface.de>

	* manager_channels: Fix throwing of HangupHandler manager events

	  The type value extracted from stasis message data in channel_hangup_handler_cb
	  isn't compared against the valid values "run", "pop" and "push". Thus the
	  manager events HangupHandlerPush, HangupHandlerPop and HangupHandlerRun are
	  never thrown.

	  This regression was introduced by ASTERISK_21462.

	  ASTERISK-28252

	  Change-Id: I9956e35e18da1873113644df1ddc3c7cd37bf524

2019-01-19 15:55 +0000 [05b79d16ab]  Chris-Savinovich <csavinovich@digium.com>

	* Test_cel: Fails when DONT_OPTIMIZE is off

	  A bug in GCC causes TEST_CEL to return failure under the following
	  conditions:
	  1. TEST_FRAMEWORK on
	  2. DONT_OPTIMIZE off
	  3. Fedora and Ubuntu
	  4. GCC 8.2.1
	  5. Test name: test_cel_dial_pickup
	  6. There must exist a certain combination of multithreading.
	  The bug affects arithmetic calculations when the optimization level
	  is bigger than O1 and the -fpartial-inline flag is on. Provided these
	  conditions, function ast_str_to_lower() fails to convert to lower case
	  due to said function being of type force_inline.  The solution is to
	  remove the "force_inline" type declaration from function ast_str_to_lower()

	  Change-Id: Ied32e0071f12ed9d5f3b4cdd878b2532a1c769d7

2018-12-10 07:20 +0000 [dbef559e0b]  George Joseph <gjoseph@digium.com>

	* app_voicemail:  Add Mailbox Aliases

	  You can now define an "aliases" context in voicemail.conf
	  whose entries point to actual mailboxes.  These can be used anywhere
	  the mailbox is specified.

	  Example:
	  [general]
	  aliasescontext = myaliases

	  [default]
	  1234 = yadayada

	  [myaliases]
	  4321@devices = 1234@default

	  Now you can use 4321@devices to refer to the 1234@default mailbox.

	  This can be useful to provide channel drivers with constant
	  mailbox specifications such as <extension>@devices leaving
	  app_voicemail to control exactly which mailbox the alias points to.
	  Now, only voicemail has to be reloaded to make changes instead of
	  individual channel drivers which are usually more expensive to
	  reload.

	  Change-Id: I395b9205c91523a334fe971be0d1de4522067b04

2019-01-22 12:07 +0000 [f1fb249132]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_registrar: mitigate blocked threads on reliable transport shutdown

	  When a reliable transport is shutdown it's possible for the pjsip registrar
	  resource shutdown handler to get called multiple times. If this happens and one
	  of the threads is taking "too long" (slow database call for instance) then the
	  others get blocked waiting to delete.

	  Since it only takes one to delete the contact then the other threads should be
	  able to continue on if one of the threads is currently "deleting". This patch
	  makes it so now when a thread enters the shutdown handler it checks to see if a
	  thread is currently already "deleting". If so, then the thread does not attempt
	  to get the lock, and instead continues on thus avoiding the blockage.

	  ASTERISK-28213 #close

	  Change-Id: I7563ca596312b1dff4f3ab41483e89fe2862328a

2019-01-22 09:02 +0000 [9c11399be3]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Add patch for double free issue in timer heap

	  Fixed #2172: Avoid double reference counter decrements in
	  timer in the scenario of race condition between
	  pj_timer_heap_cancel() and pj_timer_heap_poll().

	  Change-Id: If000e9438c83ac5084b678eb811e902c035bd2d8

2019-01-18 16:11 +0000 [fb6e0df173]  Sean Bright <sean.bright@gmail.com>

	* pjsip_transport_management: Shutdown transport immediately on disconnect

	  The transport management code that checks for idle connections keeps a
	  reference to PJSIP's transport for IDLE_TIMEOUT milliseconds (32000 by
	  default). Because of this, if the transport is closed before this
	  timeout, the idle checking code will keep the transport from actually
	  being shutdown until the timeout expires.

	  Rather than passing the AO2 object to the scheduler task, we just pass
	  its key and look it up when it is time to potentially close the idle
	  connection. The other transport management code handles cleaning up
	  everything else for us.

	  Additionally, because we use the address of the transport when
	  generating its name, we concatenate an incrementing ID to the end of the
	  name to guarantee uniqueness.

	  Related to ASTERISK~28231

	  Change-Id: I02ee9f4073b6abca9169d30c47aa69b5e8ae9afb

2019-01-20 12:15 +0000 [6506c5b1d4]  Valentin Vidic <vvidic@valentin-vidic.from.hr>

	* channel.c: Fix segfault with Monitor(wav,file,i)

	  If the Monitor is started with the i option the read_stream will be
	  NULL. One code path in channel.c checks if write_stream is set but than
	  uses read_stream instead causing a segfault.

	  ASTERISK-28249

	  Change-Id: I1bae9126537be54895c7fea2d08dd9488d8cc525

2019-01-10 13:34 +0000 [fcd07c34fb]  Joshua C. Colp <jcolp@digium.com>

	* stasis / manager / ari: Better filter messages.

	  Previously both AMI and ARI used a default route on
	  their stasis message router to handle some of the
	  messages for publishing out their respective
	  connection. This caused messages to be given to
	  their subscription that could not be formatted
	  into AMI or JSON.

	  This change adds an API call to the stasis message
	  router which allows a default route to be set as well
	  as formatters that the default route is expecting.
	  This allows both AMI and ARI to specify that their
	  default route only wants messages of their given
	  formatter. By doing so stasis can more intelligently
	  filter at publishing time so that they do not receive
	  messages which will not be turned into AMI or JSON.

	  ASTERISK-28244

	  Change-Id: I65272819a53ce99f869181d1d370da559a7d1703

2019-01-17 09:56 +0000 [011e46d5a6]  Sean Bright <sean.bright@gmail.com>

	* sched: Make sched_settime() return void because it cannot fail

	  Change-Id: I66b8b2b2778f186919d73ae9bf592104b8fb1cd5

2019-01-08 01:38 +0000 [21a1feece2]  Jeremy Lainé <jeremy.laine@m4x.org>

	* res_http_websocket: respond to CLOSE opcode

	  This ensures that Asterisk responds properly to frames received from a
	  client with opcode 8 (CLOSE) by echoing back the status code in its own
	  CLOSE frame.

	  Handling of the CLOSE opcode is moved up with the rest of the opcodes so
	  that unmasking gets applied. The payload is no longer returned to the
	  caller, but neither ARI nor the chan_sip nor pjsip made use of the
	  payload, which is a good thing since it was masked.

	  ASTERISK-28231 #close

	  Change-Id: Icb1b60205fc77ee970ddc91d1f545671781344cf

2019-01-04 17:14 +0000 [44a862fb57]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_transport_websocket: Don't assert on 0 length payloads

	  When --enable-dev-mode is used, pjsip_tpmgr_receive_packet() will assert
	  if passed a payload length of 0, so treat empty frames as if we didn't
	  receive them.

	  Change-Id: I9c5fdccd89cc8d2f3ed7e3ee405ef0fc78178f48

2019-01-07 12:04 +0000 [4b24da607e]  Mohit Dhiman <mohitdhiman@drishti-soft.com>

	* stasis/endpoint: Fix memory leak of channel_ids in ast_endpoint structure.

	  During Bridging of two channels if masquerade operation is performed on a
	  channel (clone channel) which was created with endpoint details
	  (ast_channel_alloc_with_endpoint()) and the original channel which is created
	  without endpoint details (ast_channel_alloc()) then both the channels must
	  exchange their endpoint details or else after masquerade when clone channel
	  is being destroyed the endpoint cleanup callbacks will be destroyed too and
	  after call completion unique_id of original channel will still be there in
	  ast_endpoint structure's channel_ids container.

	  ASTERISK-28197

	  Change-Id: Ied0451f378a3f2a36acc8c0984959a69895efa17

2019-01-05 11:14 +0000 [d2c182b6ab]  Diederik de Groot <dkgroot@talon.nl>

	* RAII: Change order or variables in clang version

	  This prevents use-after-scope issues when unwinding the stack,
	  which happens in reverse order. The varname variable needs to
	  remain alive for the destruction to be able to access it.
	  Issue was found using clang + address-sanitizer.

	  ASTERISK-28232 #close

	  Change-Id: I00811c34ae910836a5fb6d22304528aef92624db

2018-12-18 13:47 +0000 [7f22c9f4b7]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: add option to enable ContactStatus event when contact is updated

	  The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
	  the ContactStatus AMI event when a contact is updated.
	  Thist change broke things which rely on old behavior.

	  This patch adds a new PJSIP global configuration option
	  'send_contact_status_on_update_registration' to be able to preserve old
	  ContactStatus behavior.
	  By default new behavior, i.e. the ContactStatus event will not be sent when a
	  device refreshes its registration.

	  Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46

2019-01-07 08:06 +0000 [c6271155fb]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Only enable abs-send-time when WebRTC is enabled.

	  For video streams it was possible for the abs-send-time information
	  to be placed into RTP streams even if not negotiated. Depending on
	  the endpoint in use this could cause video to not flow.

	  We now only enable abs-send-time for negotiation if WebRTC is enabled.

	  ASTERISK-28230

	  Change-Id: I0eb682302f8da3a4ea3c42e839208d55f825ed0c

2019-01-04 09:57 +0000 [c0e57e458b]  Alexei Gradinari <alex2grad@gmail.com>

	* RTP: reset DTMF last seqno/timestamp on RTP renegotiation

	  The remote side may start a new stream when renegotiating RTP.
	  Need to reset the DTMF last sequence number and the timestamp
	  of the last END packet on RTP renegotiation.

	  If the new time stamp is lower then the timestamp of the last DTMF END packet
	  the asterisk drops all DTMF frames as out of order.

	  This bug was caught using Cisco ip-phone SPA5XX and codec g722.
	  On SIP session update the SPA50X resets stream and a new timestamp is twice
	  smaller then the previous.

	  ASTERISK-28162 #close

	  Change-Id: Ic72b4497e74d801b27a635559c1cf29c16c95254

2019-01-02 11:44 +0000 [92298434bd]  Bryan Boatright <ast-bugs@omega71.com>

	* app_voicemail: Fix Channel variable VM_MESSAGEFILE for "urgent" voicemail

	  If a voicemail is marked "urgent" then the VM_MESSAGEFILE channel variable is
	  not updated correctly since urgent messages are in a different directory. The
	  fix is to update the channel variable when the path to the urgent message is
	  created.

	  ASTERISK-28225

	  Change-Id: I8efbace06e6122ea0793f7bdb073d4378e8274ca

2019-01-02 11:33 +0000 [2d9482695d]  Joshua Colp <jcolp@digium.com>

	* app_queue: Fix crash when using 'b' option on non-ringall queue.

	  When using the 'b' option to Queue with a queue that was not configured
	  for ring all a crash would occur as the wrong pointer would be used.

	  ASTERISK-28218

	  Change-Id: If1390f64e321047dff24fd2410c95dde74904980

2018-12-19 13:02 +0000 [f196078705]  Richard Mudgett <rmudgett@digium.com>

	* stasic.c: Fix printf format type mismatches with arguments.

	  An int64_t is not likely the same size as a long.

	  * Changed the int64_t values in the statistics structs to longs so casting
	  is not necessary when generating the formatted CLI output.  The offending
	  members did not need to be int64_t anyway as they were only set by an int
	  type variable which was already truncating bits.

	  * Reordered the statistics structs to reduce potential padding bytes.

	  Change-Id: Ic090a070e9dc4ca650ebdb9c01ed50a581289962

2018-12-26 12:30 +0000 [44a7faca21]  Corey Farrell <git@cfware.com>

	* stasis: Fix ABI between DEVMODE and non-DEVMODE.

	  Create compatibility stubs for maximum ABI compatibility.

	  ASTERISK-28212 #close

	  Change-Id: I872c04842ab6b61e9dd6d37e4166bc619aa20626

2018-12-26 10:24 +0000 [ff2ed4eeee]  George Joseph <gjoseph@digium.com>

	* Revert "stasis_cache:  Stop caching stasis subscription change messages"

	  This commit caused issues with polling when combined with
	  the revert commit "Revert "app_voicemail: Remove need to subscribe to stasis"

	  This reverts commit 17d6d9e1e7d0db04ebd8d2e0cd9e087ec5462e2f.

	  ASTERISK-28222
	  Reported by: abelbeck

	  Change-Id: Ib6a16cbe2c0b74c76c64264f525ab647959c1483

2018-12-24 11:42 +0000 [3efe5061d5]  George Joseph <gjoseph@digium.com>

	* ast_coredumper:  Refactor the pid determination process

	  In order to get a dump of the running process, we need to find the
	  pid of the main asterisk process.  This can be tricky if there are
	  also instances of "asterisk -r" running or if an alternate location
	  for asterisk.conf was specified on the command line with the -C
	  option that also specified an alternation location for the pid file.

	  So now...

	  1. We find the asterisk executable with "which" or the --asterisk-bin
	     command line option.
	  2. If there's only 1 process with an executable path that matches,
	     we use that pid.  If not...
	  3. We try "<asterisk-bin> -rx 'core show settings'" and parse the
	     output to find the pidfile, then read that for the pid.  If that
	     didn't work...
	  4. We get a list of all the pids matching <asterisk-bin> and look
	     in /proc/<pid>/cmdline for a -C argument and retry the "core show
	     settings" using the same -C option.  We can't parse the output
	     of "ps" to get the -C path because it may contain spaces.  The
	     contents of /proc/<pid>/cmdline are delimited by NULLs.  For BSDs
	     we may have to mount /proc first. :(

	  ASTERISK-28221
	  Reported by: Andrew Nagy

	  Change-Id: I8aa1f3f912f949df2b5348908803c636bde1d57c

2018-12-19 12:39 +0000 [59717b5e85]  Richard Mudgett <rmudgett@digium.com>

	* backtrace.c: Fix casting pointer to/from integral type.

	  The backtrace library bfd.h include file does not get the sizes of
	  pointers and ints right on some platforms.  On my old test box the size
	  of bfd_vma is 8 while the size of a pointer is 4.  gcc on the box
	  complains of the integer casting to/from pointers size mismatch.

	  * uintptr_t to the rescue by doing an appropriate two stage cast.

	  Change-Id: Icb2621583f50c8728de08a3c824d95fe53cc45d0

2018-12-18 10:33 +0000 [aebb822d1f]  George Joseph <gjoseph@digium.com>

	* app_voicemail:  Don't delete mailbox state unless mailbox is deleted

	  The free_user function was automatically deleting the stasis mailbox
	  state but this only makes sense when the mailbox is actually
	  deleted, not just the structure freed.  This was causing issues
	  where leave_voicemail would publish the mwi message to stasis and
	  delete the state before the message could be processed by
	  res_pjsip_mwi.

	  * Removed the delete of state from free_user().

	  * Created a new free_user_final() function that both frees the data
	    structure and deletes the state.  This function is only called
	    during module load/unload where it's appropriate to delete the
	    state.

	  ASTERISK-28215

	  Change-Id: I305e8b3c930e9ac41d901e5dc8a58fd7904d98dd

2018-12-14 11:52 +0000 [970805180e]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk: Remove some unused structure fields.

	  All of the fields that were removed were no longer referenced except for
	  'lastrxts' and 'rxseqno' which were only ever written to.

	  Change-Id: I5a5d31eb33e97663843698f58d0d97f22a76627c

2018-12-13 15:56 +0000 [f60afac587]  Sean Bright <sean.bright@gmail.com>

	* res_format_attr_h264.c: Make sure profile-level-id fmtp attribute is set

	  The profile-iop octet (the 2nd) of profile-level-id can be zero
	  according to RFC 6184 Section 8.1. So we ignore its value when deciding
	  to include profile-level-id in the outgoing SDP.

	  ASTERISK-27959 #close
	  Reported by: David Kuehling

	  Change-Id: Id28cd916a3d7748058fe9609b585d07d9e243f73

2018-12-11 14:49 +0000 [640aac768b]  Sean Bright <sean.bright@gmail.com>

	* bridge_builtin_features.c: Set auto(mix)mon variables on both channels

	  This is how features behaved up through Asterisk 11, but was changed
	  when the new bridging framework was implemented in Asterisk 12.

	  Reported by rrittgarn in #asterisk.

	  Change-Id: I72cf86223947a8118c75f46e2c603dbc11e3125b

2018-12-07 14:22 +0000 [2610379605]  Alexei Gradinari <alex2grad@gmail.com>

	* confbridge: announce to the marked users when they join an empty conference

	  Currently the file sound_only_person is not played when a marked
	  user (with announce_only_user=yes) joins an empty conference.

	  This patch fixes it.

	  ASTERISK-28201 #close

	  Change-Id: I85b67687e6b220939c3af8091d83a70a7b174cf4

2018-11-30 05:40 +0000 [68ec7d93e8]  Joshua C. Colp <jcolp@digium.com>

	* stasis: Add statistics gathering in developer mode.

	  This change adds statistics gathering to Stasis topics,
	  subscriptions, and message types. These can be viewed using
	  CLI commands and provide insight into how Stasis is used
	  and how long certain operations take to execute.

	  These are only available when Asterisk is compiled in
	  developer mode and do not have any impact under normal
	  operation.

	  ASTERISK-28117

	  Change-Id: I94411b53767f89ee01714daaecf0c2f1666e863f

2018-12-11 08:54 +0000 [9febdba05b]  Sean Bright <sean.bright@gmail.com>

	* Use non-blocking socket() and pipe() wrappers

	  Change-Id: I050ceffe5a133d5add2dab46687209813d58f597

2018-12-11 09:06 +0000 [16ae8330d2]  Sean Bright <sean.bright@gmail.com>

	* utils: Don't set or clear flags that don't need setting or clearing

	  Change-Id: I0e7fb507ac09b15e45e1ff8501ecfca67afa5217

2018-12-11 06:55 +0000 [9c9519796b]  Sean Bright <sean.bright@gmail.com>

	* build: Update config.guess and config.sub

	  Pulled from the authoritative respository at:

	    https://git.savannah.gnu.org/cgit/config.git/tree/

	  Change-Id: I748708ce24d4d47ff1f395075d0b08d3da3355e0

2018-12-11 08:28 +0000 [df0b59564e]  George Joseph <gjoseph@digium.com>

	* Revert "RTP: reset DTMF last seqno/timestamp on voice packet with marker bit"

	  This reverts commit 331c906c4811df17612efa5c31e19df7186b1c81.

	  Pending resolution of ASTERISK_28200

	  Change-Id: Ie7172707b603c1da3f200613bd4473335af75128

2018-12-06 11:23 +0000 [59cf552dd3]  Sebastian Damm <damm@sipgate.de>

	* res/res_ari: Add additional hangup reasons

	  The ARI DELETE /channels command takes a "reason" parameter
	  Previously, there were only five reasons implemented
	  This patch adds more reasons to choose from for more
	  complex setups

	  ASTERISK-28198 #close

	  Change-Id: I85996f1076c9946d65c778413f040a845a90fecc

2018-12-07 06:57 +0000 [8a18fb81c1]  Sean Bright <sean.bright@gmail.com>

	* utils: Wrap socket() and pipe() to reduce syscalls

	  Some platforms provide an implementation of socket() and pipe2() that allow the
	  caller to specify that the resulting file descriptors should be non-blocking.

	  Using these allows us to potentially elide 3 calls into 1 by avoiding extraneous
	  calls to fcntl() to set the O_NONBLOCK flag afterwards.

	  In passing, change ast_alertpipe_init() to use pipe2() directly instead of the
	  wrapper if it is available.

	  Change-Id: I3ebe654fb549587537161506c6c950f4ab298bb0

2018-11-29 09:53 +0000 [79899db740]  George Joseph <gjoseph@digium.com>

	* stasis:  Allow filtering by formatter

	  A subscriber can now indicate that it only wants messages
	  that have formatters of a specific type.  For instance,
	  manager can indicate that it only wants messages that have a
	  "to_ami" formatter.  You can combine this with the existing
	  filter for message type to get only messages with specific
	  formatters or messages of specific types.

	  ASTERISK-28186

	  Change-Id: Ifdb7a222a73b6b56c6bb9e4ee93dc8a394a5494c

2018-12-04 18:00 +0000 [6071ad77f5]  Giuseppe Sucameli <sucameli@netresults.it>

	* chan_sip: Fix leak using contact ACL

	  Free old peer's contactacl before overwrite it within build_peer.

	  ASTERISK-28194

	  Change-Id: Ie580db6494e50cee0e2a44b38e568e34116ff54c

2018-12-05 15:28 +0000 [1657508ddd]  David M. Lee <dlee@respoke.io>

	* Removing registrar_expire from basic-pbx config

	  The module has been removed, so it shouldn't be in the default config any more.

	  Change-Id: Ie7e09f00f9c9a885574e29478250de4c2cefd9f1

2018-12-05 09:37 +0000 [a6c2662404]  George Joseph <gjoseph@digium.com>

	* CI: Various updates to buildAsterisk.sh

	  * Added ---no-configure, --no-menuselect, --no-make and --no-alembic
	    options that prevent those actions from being performed.  Useful
	    for testing and re-running portions of the build after fixing
	    earlier failures.

	  * Added "set -e" to abort the script on command failure.
	    Not sure why this wasn't there in the first place.

	  * Fixed a few echos that were redirecting to stderr when they shouldn't
	    have been.

	  * Catch more alembic failures by actually trying to generate the SQL.

	  Change-Id: I9f395fa4e9254be7299e7c1014f1a13db78faffb

2018-11-30 14:00 +0000 [60e548ffa5]  Chris-Savinovich <csavinovich@digium.com>

	* test_websocket_client.c: Disable websocket_client_create_and_connect test.

	  This test was occasionally failing, with:

	    WARNING[5812]: http.c:1939 httpd_helper_thread: Failed to set
	        TCP_NODELAY on HTTP connection: Bad file descriptor
	    ERROR[5812]: iostream.c:91 ast_iostream_nonblock: Failed to get
	        fcntl() flags for file descriptor: Bad file descriptor
	    ERROR[5812]: iostream.c:569 ast_iostream_close: close() failed: Bad
	        file descriptor

	  Disabled for now by making the test explicit only.

	  Change-Id: I778f6cbb6104c6b4e89737a2eaf1a9540888d351

2018-11-28 01:14 +0000 [5de36abd5a]  Pirmin Walthert <infos@nappsoft.ch>

	* pjproject_bundled: check whether UPDATE is supported on outgoing calls

	  In ASTERISK-27095 an issue had been fixed because of which chan_pjsip was not
	  trying to send UPDATE messages when connected_line_method was set to invite.
	  However this only solved the issue for incoming INVITES. For outgoing INVITES
	  (important when transferring calls) the options variable needs to be updated
	  at a different place.

	  ASTERISK-28182 #close
	  Reported-by: nappsoft

	  Change-Id: I76cc06da4ca76ddd6dce814a8b97cc66b98aaf29

2018-11-11 10:29 +0000 [1b6df87816]  Sungtae Kim <pchero21@gmail.com>

	* res_pjsip: Patch for res_pjsip_* module load/reload crash

	  The session_supplements for the pjsip makes crashes when the module
	  load/unload.

	  ASTERISK-28157

	  Change-Id: I5b82be3a75d702cf1933d8d1417f44aa10ad1029

2018-12-04 00:03 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.1.0-rc1 Released.

2018-12-03 17:45 +0000 [12a30c71d8]  Kevin Harwell <kharwell@digium.com>

	* pjsip_add_use_callerid_contact: fixed alembic script

	  Change-Id: I413f1583c797fb79651786cd8d0b003599f8ed10

2018-12-03 16:41 +0000 [27806fd04d]  Sean Bright <sean.bright@gmail.com>

	* core: Add some documentation to the malloc_trim code

	  This adds documentation to handle_cli_malloc_trim() indicating how it
	  can be useful when debugging OOM conditions.

	  Change-Id: I1936185e78035bf123cd5e097b793a55eeebdc78

2018-12-03 14:01 +0000 [1f09c61804]  Chris-Savinovich <csavinovich@digium.com>

	* core: Merge malloc_trim patch

	  We've had multiple opportunities where Richard Mudgett's
	  malloc_trim patch has been useful. Let's get it
	  pushed up to gerrit and merged.

	  Since malloc_trim is only available in libc, an entry is
	  added to configure.ac to create a definition for
	  HAVE_MALLOC_TRIM.

	  Change-Id: Ia38308c550149d9d6eae4ca414a649957de9700c

2018-11-29 13:26 +0000 [a2a8a41db3]  George Joseph <gjoseph@digium.com>

	* Revert "app_voicemail: Remove need to subscribe to stasis"

	  This reverts commit 29115e23848cceee0e2763bc70e87cb311919cdd.

	  That commit closed a long standing hole which allowed subscriptions
	  to mailboxes that weren't configured in voicemail.conf.  This
	  caused an issue with FreePBX which depdended on that behavior.
	  The commit is being reverted until FreePBX can handle the new
	  behavior.

	  ASTERISK-28151
	  Reported by: Ronald Raikes

	  Change-Id: I57b7b85e75d7dd97c742b5c69d718a0f61260c15

2018-10-22 07:47 +0000 [aa004295f9]  lvl <digium@lvlconsultancy.nl>

	* app_queue: Revert broken queue channel reference patch

	  Revert commit 6409e7b11a2310196a9978b30a6b79e2760be592, and add
	  NULL checks for all app_queue event handling code.

	  Related issues: ASTERISK~25185, ASTERISK~27006, ASTERISK~25844

	  ASTERISK-28125

	  Change-Id: I37334ea184ebb56e54471496b82937d4927815a0

2018-11-26 16:18 +0000 [a5e77e9c37]  George Joseph <gjoseph@digium.com>

	* test_cel:  Plug a few ref leaks

	  These are only a few of the leaks.  The large number of macros
	  and return paths in this file would make a weeks worth of work
	  to plug them all.

	  Change-Id: Ie2369fa944023d44767871c5c30974cb077ffb56

2018-11-26 06:09 +0000 [606304eb54]  Corey Farrell <git@cfware.com>

	* jansson: Upgrade to 2.12.

	  This brings in jansson-2.12, removes all patches that were merged
	  upstream.  README is created in third-party/jansson/patches to explain
	  how to add patches but also because the patches folder must exist for
	  the build process to succeed.

	  Change-Id: If0f2d541c50997690660c21fb7b03d625a5cdadd

2018-11-23 09:40 +0000 [331c906c48]  Alexei Gradinari <alex2grad@gmail.com>

	* RTP: need to reset DTMF last seqno/timestamp on voice packet with marker bit

	  The marker bit set on the voice packet indicates the start
	  of a new stream and a new time stamp.
	  Need to reset the DTMF last sequence number and the timestamp
	  of the last END packet.

	  If the new time stamp is lower then the timestamp of the last DTMF END packet
	  the asterisk drops all DTMF frames as out of order.

	  This bug was caught using Cisco ip-phone SPA50X and codec g722.
	  On SIP session update the SPA50X resets stream indicating it with market bit
	  and a new timestamp is twice smaller then the previous.

	  ASTERISK-28162 #close

	  Change-Id: If9c5742158fa836ad549713a9814d46a5d2b1620

2018-11-19 14:10 +0000 [ed7a5664b6]  Corey Farrell <git@cfware.com>

	* astobj2: Eliminate usage of legacy ao2_container_alloc routine.

	  Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
	  ao2_container_alloc_list.

	  ao2_container_alloc is now restricted to modules only and is being
	  removed from Asterisk 17.

	  Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088

2018-11-14 05:02 +0000 [0d2b39065f]  Corey Farrell <git@cfware.com>

	* astobj2: Create function to copy weak proxied objects from container.

	  Create ao2_container_dup_weakproxy_objs to perform a similar function to
	  ao2_container_dup.  This function expects the source container to have
	  weakproxy objects, inserts the associated non-weak objects into the
	  destination container.  Orphaned weakproxy objects are ignored.

	  Create test for this new function and for ao2_weakproxy_find.

	  Change-Id: I898387f058057e08696fe9070f8cd94ef3a27482

2018-11-16 14:45 +0000 [72e532136c]  Michael Walton (license 6502)

	* func_strings: HASHKEY - negative array index can cause corruption

	  This patch makes it so only matching non-empty key names, and keys created by
	  the HASH function are eligible for inclusion in the comma separated string. It
	  also fixes a bug where it was possible to write to a negative index if the
	  result buffer was empty.

	  ASTERISK-28159
	  patches:
	    ASTERISK-28159.diff submitted by Michael Walton (license 6502)

	  Change-Id: I6e57fe7307dfd856271753aed5ba64c59b511487

2018-11-19 11:59 +0000 [729967e99c]  George Joseph <gjoseph@digium.com>

	* CI: Get job timeouts from environment

	  The job timeouts were hard coded in the jenkinsfiles which
	  means changes had to go through gerrit.  Now they are taken
	  from the following environment variables (and their defaults) that
	  can be set in Jenkins configuration...

	  TIMEOUT_GATES =      "60 MINUTES"
	  TIMEOUT_DAILIES =    "3 HOURS"
	  TIMEOUT_REF_DEBUG =  "24 HOURS"
	  TIMEOUT_UNITTESTS =  "30 MINUTES"

	  Change-Id: I673a551c1780bf665a3bc160b245da574aa4bbab

2018-11-18 17:53 +0000 [d05c219aad]  Joshua C. Colp <jcolp@digium.com>

	* stasis: Remove stringfields and lock from change message.

	  When a subscribe or unsubscribe occurs a message is published
	  containing this information. This change makes it so that the
	  message no longer uses stringfields or a lock, as both are not
	  really needed for the message.

	  Change-Id: I3f4831931d79f94fd979baf48048738df5dc1632

2018-11-19 07:00 +0000 [f9b9bdd0b0]  Corey Farrell <git@cfware.com>

	* app_queue: Cleanup queue_ref / queue_unref routines.

	  This replaces the inline functions with macros.  This removes the need
	  to directly use __ao2_ref, opts instead for standard ao2_bump and
	  ao2_cleanup macros.

	  Change-Id: If4e04e9bab2e3c883188437cb9f487b3e498a21b

2018-11-08 09:53 +0000 [41eab5b3b8]  George Joseph <gjoseph@digium.com>

	* backtrace:  Refactor ast_bt_get_symbols so it doesn't crash

	  We've been seeing crashes in libbfd when we attempt to generate
	  a stack trace from multiple threads.  It turns out that libbfd
	  is NOT thread-safe.  It can cache the bfd structure and give it to
	  multiple threads without protecting itself.  To get around this,
	  we've added a global mutex around the bfd functions and also have
	  refactored the use of those functions to be more efficient and
	  to provide more information about inlined functions.

	  Also added a few more tests to test_pbx.c.  One just calls
	  ast_assert() and the other calls ast_log_backtrace().  Neither are
	  run by default.

	  WARNING:  This change necessitated changing the return value of
	  ast_bt_get_symbols() from an array of strings to a VECTOR of
	  strings.  However, the use of this function outside Asterisk is not
	  likely.

	  ASTERISK-28140

	  Change-Id: I79d02862ddaa2423a0809caa4b3b85c128131621

2018-11-16 20:33 +0000 [cb83350230]  Sungtae Kim <pchero21@gmail.com>

	* res/res_ari: Fix null endpoint handle

	  The res_ari(POST /channels/create handler) deos not check the endpoint
	  parameter length. And it causes core
	  dump.
	  Fixed it to check the parameter length. Also fixed memory leak.

	  ASTERISK-28169

	  Change-Id: Ibf10a9eb8a2e3a9ee1e13fbe748b2ecf955c3993

2018-11-13 09:28 +0000 [e6005f1227]  Alexei Gradinari <alex2grad@gmail.com>

	* pjsip: New function PJSIP_PARSE_URI to parse URI and return part of URI

	  New dialplan function PJSIP_PARSE_URI added to parse an URI and return
	  a specified part of the URI.

	  This is useful when need to get part of the URI instead of cutting it
	  using a CUT function.

	  For example to get 'user' part of Remote URI
	  ${PJSIP_PARSE_URI(${CHANNEL(pjsip,remote_uri)},user)}

	  ASTERISK-28144 #close

	  Change-Id: I5d828fb87f6803b6c1152bb7b44835f027bb9d5a

2018-09-23 15:50 +0000 [8d436a95e7]  Joshua Colp <jcolp@digium.com>

	* stasis: Add internal filtering of messages.

	  This change adds the ability for subscriptions to indicate
	  which message types they are interested in accepting. By
	  doing so the filtering is done before being dispatched
	  to the subscriber, reducing the amount of work that has
	  to be done.

	  This is optional and if a subscriber does not add
	  message types they wish to accept and set the subscription
	  to selective filtering the previous behavior is preserved
	  and they receive all messages.

	  There is also the ability to explicitly force the reception
	  of all messages for cases such as AMI or ARI where a large
	  number of messages are expected that are then generically
	  converted into a different format.

	  ASTERISK-28103

	  Change-Id: I99bee23895baa0a117985d51683f7963b77aa190

2018-11-18 10:38 +0000 [dd0a3c0bba]  George Joseph <gjoseph@digium.com>

	* CI:  Add tmpfs to all jenkinsfiles

	  Change-Id: Ida29d70d48d5f39aabf0b25c66b51f79324a8cba

2018-11-17 15:40 +0000 [77e9c877b5]  George Joseph <gjoseph@digium.com>

	* CI:  Mount a tmpfs on /tmp for testsuite docker containers

	  Change-Id: I0566d81b0852f22066cd76d58eae5f1fda5602aa
	  (cherry picked from commit 73efe86436427e5f43c532e5d42505ab4ec104d9)

2018-11-17 13:07 +0000 [0552bc2a94]  George Joseph <gjoseph@digium.com>

	* CI:  Pass work directory to runTestsuite

	  The testsuite can now use a user-specified work directory for
	  all it's temp files.  This allows the docker containers to use
	  a tmpfs backed directory for the temp files instead of it's
	  own write-layer image.

	  * runTestsuite.sh now accepts a --work-dir command line argument
	    that gets exported as AST_WORK_DIR before running the testsuite.

	  * gates.jenkinsfile now specifies --work-dir to be
	    <testsuite_dir>/astroot.

	  Since the Asterisk CI docker hosts now mount /srv/jenkins/workspace
	  on a tmpfs, asterisk should be compiled and the testsuite run all in
	  memory.

	  Change-Id: If5ee905a15821296c355bb84cda38950ad8edc45
	  (cherry picked from commit a335f4c9adb0a00211345634f61917bdf5b412c2)

2018-11-15 11:41 +0000 [7ba8f32632]  George Joseph <gjoseph@digium.com>

	* CI: Allow runUnittests to use 'expect' to run the tests

	  There seems to be a race condition between starting the asterisk
	  daemon and attempting to use 'asterisk -r' that can cause the
	  control socket file to not be created.  Since all of the Jenkins
	  slaves have 'expect' installed, the runUnittests script can use
	  it to start asterisk in the forground and issue the commands
	  interactively.  This is much more reliable and it can also make
	  startup errors more visible since they'll be in the Jenkins console
	  output.

	  If 'expect' isn't installed, the original daemon/asterisk -r
	  process is used.

	  Also added a "core show settings" before running the tests
	  and added "notice,warning,error" to the console log.

	  Change-Id: Idd656085f854afede813ac241b9e312b31358160

2018-11-12 12:23 +0000 [699dfa9401]  Corey Farrell <git@cfware.com>

	* taskprocessor: Prevent race creating new taskprocessor.

	  Task processors are retrieved using a 'get or create' pattern.  The
	  singleton container was unlocked between the get and create steps so
	  it's possible that two threads could create task processors with the
	  same name at the same time.

	  Change-Id: Id64fae94a6a1e940ddf38fde622dcd4391635382

2018-11-16 06:20 +0000 [3bdf6ac918]  Corey Farrell <git@cfware.com>

	* pjproject-bundled: Use AST_DEVMODE for conditional compilation.

	  We previously allowed resample and g711 codecs to be built when
	  TEST_FRAMEWORK was enabled.  This could cause errors if the testsuite
	  was run without this option enabled.  Switch the build system to allow
	  those codecs to be built when --enable-dev-mode is used.  This removes a
	  chance for strange testsuite errors from use of an inadequate pjsua
	  binary.

	  Change-Id: Iee8a3613cdb711fa7e7d217c5a775a575907ae22

2018-11-15 14:47 +0000 [2a76489eba]  Corey Farrell <git@cfware.com>

	* res_pjsip_caller_id: Use static pj_str_t for fromto header names.

	  PJSIP assumes that these header names are not allocated, does not clone
	  the name strings when reusing headers.

	  Block unload of res_pjsip_caller_id until shutdown to ensure static
	  memory stays valid.  It was previously unsafe to unload while any
	  sessions are active.

	  Change-Id: I190854dea943d6e441cf03733f8a0da661aea27f

2018-10-24 07:38 +0000 [7b2282c890]  Torrey Searle <torrey@voxbone.com>

	* res/res_pjsip_nat: Fix logic for REINVITES

	  The presence of Record-Route in re-invites is optional, thus it is
	  important to make sure the dialog doesn't have a routset before
	  rewriting the contact header.

	  ASTERISK-28129 #close

	  Change-Id: Ic8ceb54ccfc93f7e315e476c514a2c777f2da7dc

2018-11-15 05:33 +0000 [a36cd6960c]  Corey Farrell <git@cfware.com>

	* core: Fix handling of restart from remote console.

	  We cannot use need_el_end and SIGURG when restarting.  Instead we need
	  to run el_end within the SIGHUP restartnow handler.

	  ASTERISK-28158

	  Change-Id: Ia852276363c81bdcf1aa29eb4558c5c2fa1218a0

2018-10-25 10:25 +0000 [009d67cd28]  Jan Hoffmann <jan@3e8.eu> (license 6986)

	* AST-2018-010: Fix length of buffer needed for SRV and NAPTR results

	  When dn_expand was being called on SRV and NAPTR results, the
	  return value was being used to calculate the size of the buffer
	  needed to store the host names.  Since dn_expand returns the
	  length of the COMPRESSED name the buffer could be too short
	  to hold the EXPANDED name.  The expanded name is NULL terminated
	  so using strlen() is the correct way to determine the length
	  actually needed for the buffer.

	  ASTERISK-28127
	  Reported by: Jan Hoffmann

	  patches:
	    patch.diff submitted by janhoffmann (license 6986)

	  Change-Id: I4d35d6c431c6c6836cb61d37b1378cc47f0b414d

2018-11-13 10:51 +0000 [89d97da8a4]  Corey Farrell <git@cfware.com>

	* test_res_pjsip_scheduler: Fix possible write after free in scheduler_policy.

	  It's possible for a 4th task to be spawned before we cancel.  This
	  results in a write to the already freed test_data1.  Wait long enough to
	  verify success of the cancelation before freeing test_data1.

	  Change-Id: I057e2fcbe97f8a175e50890be89c28c20490a20f

2018-10-17 08:48 +0000 [df703c1853]  Robert Cripps <rcripps@voxbone.com>

	* bridge_native_rtp.c: Fail native bridge if no framing match.

	  ASTERISK-28110 #close

	  Change-Id: Ic64b8fc6a140a93fbdb2f97550a40d0ff334e607

2018-11-11 18:32 +0000 [05c79fdf06]  Corey Farrell <git@cfware.com>

	* taskprocessor: Do not use separate allocation for stats or name.

	  Merge storage for the stats object and name string into the main
	  allocation for struct ast_taskprocessor.

	  Change-Id: I74fe9a7f357f0e6d63152f163cf5eef6428218e1

2018-11-11 07:34 +0000 [3cde7e30ba]  Corey Farrell <git@cfware.com>

	* core: Ensure that el_end is always run when needed.

	  * Ignore console=yes configuration option in remote console processes.
	  * Use new flag to tell consolethread to run el_end and exit when needed.

	  ASTERISK-28158

	  Change-Id: I9e23b31d4211417ddc88c6bbfd83ea4c9f3e5438

2018-11-08 15:37 +0000 [1c008c6de5]  Corey Farrell <git@cfware.com>

	* jansson-bundled: Patch for off-nominal crash.

	  pack_string crashed on non-NULL strings returned when s->has_error was
	  true if the string was the result of 's' format without '#', '%' or '+'.

	  Change-Id: Ic125df691d81ba2cbc413e37bdae657b304d20d0

2018-11-02 06:38 +0000 [07a59b783e]  Corey Farrell <git@cfware.com>

	* pbx_config: Only the first [globals] section is seen.

	  If multiple [globals] sections are used (for example via separate
	  included files), only the first one is processed.  This can result in
	  lost global variables when using a modular extensions.conf.

	  ASTERISK-28146 #close

	  Change-Id: Iaac810c0a7c4d9b1bf8989fcc041cdb910ef08a0

2018-11-06 16:44 +0000 [9c9bc5acca]  Chris-Savinovich <csavinovich@digium.com>

	* res_pjsip: Send a 503 response when overload state if reliable transport.

	  When Asterisk's taskprocessors get overloaded we need to reduce the work
	  load. res_pjsip currently ignores new SIP requests and relies on SIP
	  retransmissions in the hope that the overload condition will clear soon
	  enough to handle the retransmitted SIP request.
	  This change adds the following code after ast_taskprocessor_alert_get()
	  has returned TRUE:
	  1- identifies transport type. If non-udp then send a 503 response
	  2- if transport type is udp/udp6 then ignore, as before.

	  Change-Id: I1c230b40d43a254ea0f226b7acf9ee480a5d3836

2018-11-06 16:35 +0000 [03efafbd4d]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: formatting error in documentation

	  The use of a '|' in the "global/debug" synopsis documentation caused the
	  generated html table on the wiki to add an extra column that included the
	  text after the pipe.

	  This patch replaces the pipe with a comma.

	  ASTERISK-28150

	  Change-Id: I3d79a6ca6d733d9cb290e779438114884b98a719

2018-11-05 12:44 +0000 [3e3f3bfb07]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip.c: Make taskprocessor scheduling algorithm pick the shortest queue

	  The current round-robin method does not take the current taskprocessor
	  load into consideration when distributing requests.  Using the least-size
	  method the request goes to the taskprocessor that is servicing the least
	  number of active tasks at the current time.

	  Longer running tasks with the round-robin method can delay processing
	  tasks.

	  * Change the algorithm from round-robin to least-size for picking the
	  PJSIP taskprocessor from the default serializer pool.

	  Change-Id: I7b8d8cc2c2490494f579374b6af0a4868e3a37cd

2018-11-05 08:30 +0000 [27897a850d]  Joshua Colp <jcolp@digium.com>

	* stasis: Clarify lifetime of topics.

	  As mentioned in the comment I've added in the code there is no
	  ability to unsubscribe all subscribers from a topic and explicitly
	  destroy it. This is not currently a problem as we have two types of
	  topics:

	  Long lived topics which exist for the lifetime of the system.
	  Ephemeral topics which feed a long lived topic.

	  In the case of the ephemeral topics there is no subscriber which does
	  not have its lifetime managed by the same entity that has created
	  the topic. This ensures that when the topic is being unreferenced the
	  subscribers are also unsubscribed and destroyed, allowing the topic
	  to ultimately be destroyed as well.

	  Change-Id: Ic5e244da7b16b1895ba1fc5ece481ebba5809c9a

2018-10-09 07:44 +0000 [7f6ac5dc2f]  Jasper Hafkenscheid <jasper.hafkenscheid@wearespindle.com>

	* chan_sip:  Attempt ast_do_pickup in handle_invite_replaces

	  When a call pickup is performed using and invite with replaces header
	  the ast_do_pickup method is attempted and a PICKUP stasis message is sent.

	  ASTERISK-28081 #close
	  Reported-by: Luit van Drongelen

	  Change-Id: Ieb1442027a3ce6ae55faca47bc095e53972f947a

2018-10-26 10:53 +0000 [a6d1723727]  Pascal Cadotte Michaud <pcm@wazo.io>

	* contrib/sip_to_pjsip: add a --quiet option to avoid prints

	  Using the --quiet or -q option in conjonction with /dev/stdout as the output
	  file allow the output to be used as a valid configuration.

	  Given a script that generates a valid sip.conf I can pipe the output of that
	  script into `sip_to_pjsip.py -q /dev/stdin /dev/stdout`. This allow me to use
	  that piped command in my pjsip.conf using the `exec` command.

	  ASTERISK-28136

	  Change-Id: I7b0e2e90e2549f3f8e01dc96701f111b5874c88d

2018-10-31 07:53 +0000 [9c5e75acb0]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add XML documentation for "use_callerid_contact"

	  ASTERISK-28087

	  Change-Id: I69d48813ec514f5ef06c6de994cba52630e0a3b4

2018-10-30 10:52 +0000 [719daf3299]  Richard Mudgett <rmudgett@digium.com>

	* alembic: Fix use_callerid_contact option add script.

	  ASTERISK-28087

	  Change-Id: I046d018015427d0916fab571b5a4f5367476f729

2018-10-12 16:46 +0000 [5cbe77cc46]  Alexei Gradinari <alex2grad@gmail.com>

	* pjsip: new endpoint's options to control Connected Line updates

	  This patch adds new options 'trust_connected_line' and 'send_connected_line'
	  to the endpoint.

	  The option 'trust_connected_line' is to control if connected line updates
	  are accepted from this endpoint.

	  The option 'send_connected_line' is to control if connected line updates
	  can be sent to this endpoint.

	  The default value is 'yes' for both options.

	  Change-Id: I16af967815efd904597ec2f033337e4333d097cd

2018-10-26 16:18 +0000 [fbee505611]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_notify: improve realtime performance on CLI completion on the endpoint

	  The module 'res_pjsip_notify' inefficiently makes a lot of DB requests
	  on CLI completion on the endpoint.

	  For example if there are 10k endpoints the module makes 10k requests
	  of these 10k records.

	  Even if a part of the endpoint entered
	  the module makes the same 10k requests and then filtered them by itself.

	  This patch gathers endpoints container by prefix
	  and adds all gathered endpoints to completion at once.

	  ASTERISK-28137 #close

	  Change-Id: Ic20024912cc77bf4d3e476c4cd853293c52b254b

2018-10-27 09:59 +0000 [6c2f9b730e]  Pascal Cadotte Michaud <pcm@wazo.io>

	* contrib/sip_to_pjsip: handle setvar in conversion

	  Given a sip.conf with the following content:

	  setvar FOO=1
	  setvar BAR=42

	  I want my generated pjsip.conf to containt the following set_vars

	  set_var FOO=1
	  set_var BAR=42

	  in the matching endpoint section.

	  Change-Id: I6c822401fda4133c3b44bf31e655b4eb939d4d26

2018-10-02 07:31 +0000 [3ba66b8a9d]  Torrey Searle <torrey@voxbone.com>

	* res_pjsip_session: add new flag use_callerid_contact

	  Add a new global flag to res_pjsip to allow the callerid to be used
	  as the username in the contact header.  This allows chan_pjsip to have
	  the same behavour as chan_sip

	  ASTERISK-28087 #close

	  Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95

2018-10-17 19:34 +0000 [fbb577577c]  Richard Mudgett <rmudgett@digium.com>

	* logger.c: Fix default console logging when no logger.conf available.

	  Default logging was not setup correctly when there was no logger.conf.
	  This resulted in many expected log messages not actually getting out to
	  the console.

	  Change-Id: I542e61c03b2f630ff5327f9de5641d776c6fa70c

2018-09-26 15:05 +0000 [190b3d7412]  Alexei Gradinari <alex2grad@gmail.com>

	* app_dial/queue/followme: 'I' options to block initial updates in both directions

	  The 'I' option currently blocks initial CONNECTEDLINE or REDIRECTING updates
	  from the called parties to the caller.

	  This patch also blocks updates in the other direction before call is
	  answered.

	  ASTERISK-27980

	  Change-Id: I6ce9e151a2220ce9e95aa66666933cfb9e2a4a01

2018-10-22 14:31 +0000 [11427a9665]  Richard Mudgett <rmudgett@digium.com>

	* modules.conf.sample: Update preload usage documentation.

	  Change-Id: Id449d4435c38148b56ac4cfd61ae4d90ac66bb90

2018-10-16 07:02 +0000 [fec66b8f01]  George Joseph <gjoseph@digium.com>

	* bridge_softmix:  Add SDP "label" attribute to streams

	  Adding the "label" attribute used for participant info correlation
	  was previously done in app_confbridge but it wasn't working
	  correctly because it didn't have knowledge about which video
	  streams belonged to which channel.  Only bridge_softmix has that
	  data so now it's set when the bridge topology is changed.

	  ASTERISK-28107

	  Change-Id: Ieddeca5799d710cad083af3fcc3e677fa2a2a499

2018-10-16 14:06 +0000 [dee1165d31]  Corey Farrell <git@cfware.com>

	* astobj2: Eliminate usage of legacy container allocation macros.

	  These macros have been documented as legacy for a long time but are
	  still used in new code because they exist.  Remove all references to:
	  * ao2_container_alloc_options
	  * ao2_t_container_alloc_options
	  * ao2_t_container_alloc

	  These macro's are still available for use but only in modules.  Only
	  ao2_container_alloc remains due to it's use in over 100 places.

	  Change-Id: I1a26258b5bf3deb081aaeed11a0baa175c933c7a

2018-09-28 13:31 +0000 [90887af808]  Corey Farrell <git@cfware.com>

	* lock: Replace __ast_mutex_logger with private log_mutex_error.

	  __ast_mutex_logger used the variable `canlog` without accepting it as a
	  argument.  Replace with internal macro `log_mutex_error` which takes
	  canlog as the first arguement.  This will prevent confusion when working
	  with lock.c code, many of the function declare the canlog variable and
	  in some cases it previously appeared to be unused.

	  Change-Id: I83b372cb0654c5c18eadc512f65a57fa6c2e9853

2018-10-18 14:36 +0000 [00284352b3]  Richard Mudgett <rmudgett@digium.com>

	* app_dial/app_queue: Update application option documentation

	  * Update the post-answer documentation and example.  The Dial example was
	  incorrect and misleading for the post-answer subroutine useage.

	  * Fix note and warning paragraphs in option descriptions.  They don't show
	  up in the wiki.

	  Change-Id: I81019a1fd75d5b9151f76b52c38e2a90da682d14

2018-10-18 14:56 +0000 [495a1e7e5c]  Sean Bright <sean.bright@gmail.com>

	* samples: PARKINGSLOT -> PARKING_SPACE in parking sample config

	  PARKINGSLOT was deprecated in Asterisk 12 but the sample config was not
	  updated to reflect that.

	  Change-Id: I3e087c19d9ee587094fa5304102d8084a79c2b3c

2018-10-18 12:32 +0000 [2384d6eb87]  Richard Mudgett <rmudgett@digium.com>

	* Fix 'statement' typo throughout code.

	  Most were in comments.  A couple were in warning messages.

	  Pointed out by Jonathan H on the Asterisk users mailing list.

	  Change-Id: I6286939dff5d0a27a2758140570106f1cb351855

2018-10-17 16:08 +0000 [718ccd51a3]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Add conditional module dependency to res_pjproject

	  * The dependency ensures that res_pjproject cannot be manually unloaded
	  before res_rtp_asterisk.
	  * The dependency allows startup loading errors to report that
	  res_rtp_asterisk depends upon res_pjproject.

	  Change-Id: Icf5e7581f4ddd6189929f6174c74dd951f887377

2018-10-17 14:34 +0000 [7687630074]  Richard Mudgett <rmudgett@digium.com>

	* modules: Add missing run time module support levels.

	  Change-Id: I29b9dbfa4bbfc49f21eba356858e38b1d3041824

2018-10-14 07:58 +0000 [abee4fd072]  Corey Farrell <git@cfware.com>

	* taskprocessor: Warn on unused result from pushing task.

	  Add attribute_warn_unused_result to ast_taskprocessor_push,
	  ast_taskprocessor_push_local and ast_threadpool_push.  This will help
	  ensure we perform the necessary cleanup upon failure.

	  Change-Id: I7e4079bd7b21cfe52fb431ea79e41314520c3f6d

2018-10-16 12:28 +0000 [3fe9c41342]  Richard Mudgett <rmudgett@digium.com>

	* bundled pjproject: Remove timer cleanup usage patch.

	  This patch is not in the upstream pjproject and does unsafe things with
	  the timer->_timer_id and timer->_grp_lock values in pj_timer_entry_reset()
	  outside of the timer heap lock.  pj_timer_entry_reset() is also called for
	  timers that are not about to be rescheduled in a few places.

	  Change-Id: I4fe0b4bc648f7be5903cf4531b94fc87275713c1

2018-10-10 04:37 +0000 [35f44be460]  Corey Farrell <git@cfware.com>

	* refdebug: Create refstats.py script.

	  This allows us to process AO2 statistics for total objects, memory
	  usage, memory overhead and lock usage.

	  * Install refstats.py and reflocks.py into the Asterisk scripts folder.
	  * Enable support for reflocks.py without DEBUG_THREADS.

	  Steal a bit from the ao2 magic to flag when an object lock is used.
	  Remove 'lockobj' from reflocks.py since we can now record 'used' or
	  'unused' for those objects.

	  Add comments to explain thread safety of the 'struct __priv_data'
	  bitfields.

	  Change-Id: I84e9d679cc86d772cc97c888d9d856a17e0d3a4a

2018-10-12 12:14 +0000 [0f53930c05]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: set callerid_tag to empty string

	  This patch sets the callerid_tag to empty string by default.

	  If the callerid_tag is set to NULL then the tag does not
	  become part of a connected line update.
	  For example:
	  Alice's tag is "Alice".
	  Bob's tag is empty.
	  Charlie's tag is "Charlie".
	  Alice calls Bob and then does attended transfer to Charlie.
	  When Alice hangs up the CONNECTEDLINE(tag) is "Alice"
	  on the interception routine on the Charlie's channel, but should be empty.

	  Ths patch also fix memory leaks if there are more then one options
	  "callerid", "callerid_tag", "voicemail_extension" and "contact_user"
	  in the pjsip.conf endpoint definition.

	  Change-Id: I86ba455c4677ca8d516d9a04ce7fb4d24dd576e4

2018-10-11 06:24 +0000 [08e5bbfec0]  Corey Farrell <git@cfware.com>

	* threadpool: Eliminate pointless AO2 usage.

	  thread_worker_pair, set_size_data and task_pushed_data structures are
	  allocated with AO2 objects, passed to a taskprocessor, then released.
	  They never have multiple owners or use locking so AO2 only adds
	  overhead.

	  Change-Id: I2204d2615d9d952670fcb48e0a9c0dd1a6ba5036

2018-10-12 12:21 +0000 [a5023d4f75]  Corey Farrell <git@cfware.com>

	* main/astfd: Fix GCC8 format-truncation warning.

	  The field used to store call arguments was not large enough to hold the
	  arguments string that can be constructed for 'open'.  Expand it to
	  prevent this warning/error.

	  Change-Id: I514927f256481bc84df10a51b19d5b5fb1bc387e

2018-10-10 06:38 +0000 [5ea517f80e]  Corey Farrell <git@cfware.com>

	* chan_sip: Tell module loader that chan_sip is extended support.

	  Change-Id: I33508c134b1be888b8884f5dcfee19087634e415

2018-10-09 16:18 +0000 [c001974f4f]  Richard Mudgett <rmudgett@digium.com>

	* res_statsd.c: Fix returned reload status.

	  The return status when there was no change in statsd.conf was incorrect.
	  This resulted in the wrong status message on the CLI when reloading the
	  module.

	  * Fixed cleanup on initial load if initializing statsd failed.

	  Change-Id: Id24fae75f1a7ff584a444a5680e867d989792481

2018-10-03 16:51 +0000 [e0496fe062]  Emmanuel BUU <emmanuel.buu@ives.fr>

	* core/frame: generate correct T.140 payload in ast_sendtext_data()

	  ast_sendtext_data() would create an incorrect T.140 text frame which
	  length include the null terminator byte. It causes ultimately RTP
	  packets to be send with this trailing 0. The proposed fix just set the
	  correct length to the text frame

	  ASTERISK-28089
	  Reported by: Emmanuel BUU
	  Tested by: Emmanuel BUU

	  Change-Id: I7ab1b9ed1e21683b2b667ea0a59d9aba3c77dd96

2018-10-04 18:33 +0000 [c6ee3cf639]  Corey Farrell <git@cfware.com>

	* loader: Flag module as declined in all cases where it fails to load.

	  This has no effect on startup since AST_MODULE_LOAD_FAILURE aborts
	  startup, but it's possible for this code to be returned on manual load
	  of a module after startup.

	  It is an error for a module to not have a load callback but this is not
	  a fatal system error.  In this case flag the module as declined, return
	  AST_MODULE_LOAD_FAILURE only if a required module is broken.

	  Expand doxygen documentation for AST_MODULE_LOAD_*.

	  Change-Id: I3c030bb917f6e5a0dfd9d91491a4661b348cabf8

2018-10-04 13:13 +0000 [77f151d927]  Richard Mudgett <rmudgett@digium.com>

	* func_periodic_hook.c: Cleanup module resources on failure.

	  * Make load_module() cleanup if it failed to setup the module.

	  * Make unload_module() always return 0.  It is silly to fail unloading if
	  the hook function we try to unregister was not even registered.

	  Change-Id: I280fc6e8ba2a7ee2588ca01d870eebaf74b4ffe6

2018-10-04 11:49 +0000 [bc335ceda8]  Richard Mudgett <rmudgett@digium.com>

	* codec_speex.c: Cleanup module loading to DECLINE and not FAILURE.

	  If codec_speex fails to register a translator it would cause Asterisk to
	  exit instead of continue as a DECLINED module.

	  * Make unload_module() always return 0.  It is silly to fail unloading if
	  any translators we try to unregister were not even registered.

	  Change-Id: Ia262591f68333dad17673ba7104d11c88096f51a

2018-10-04 13:03 +0000 [6fd21a6af6]  George Joseph <gjoseph@digium.com>

	* CI: Fix missing () in gates.jenkinsfile

	  Change-Id: I2f252e0f8c7f1a6328438fbd2be5d6574b7dfa5b

2018-10-04 10:13 +0000 [1598c7a306]  George Joseph <gjoseph@digium.com>

	* CI: Add timestamps and timeouts to jenkinsfiles

	  Change-Id: Ide83574dc957bc1df28e30a69079140050dfc35f

2018-10-03 17:02 +0000 [b2f96fdcfe]  Sean Bright <sean.bright@gmail.com>

	* ast_coredumper: Remove .gdbinit file on exit

	  Change-Id: I1297de78628773ca368e687c6f148bf74857cae9

2018-10-03 09:33 +0000 [d0a1237c19]  Sean Bright <sean.bright@gmail.com>

	* CI: Look up configured kernel.core_pattern sysctl

	  Change-Id: I8246a0147df8d821fbbcabc1db1887104b8bedc4

2018-10-03 15:51 +0000 [48bb4543d9]  Corey Farrell <git@cfware.com>

	* jenkins: Fix cleanup command redirection.

	  Fix redirection to /dev/null of cleanup commands.  The '2' was being
	  interpreted as part of the command instead of part of the redirect.

	  Change-Id: I2e3a591b165e0288c4b82b9ef475fdfd5392a90a

2018-10-03 15:29 +0000 [d027d193b8]  George Joseph <gjoseph@digium.com>

	* ast_coredumper: Don't use "declare -n"

	  Change-Id: I7ddfed4cd6549a0cd458e4d5cf9ac95d784de6cb

2018-10-02 16:15 +0000 [7eda6263c2]  Richard Mudgett <rmudgett@digium.com>

	* res_smdi.c: Fix module ref counting and inverted test.

	  I think this module is so screwed up that it doesn't work anymore.  Even
	  with these attempts to fix things it still won't gracefully shut down.
	  The module refs will not go to zero to allow unloading the module.

	  * Fix module ref counting dealing with the SMDI interface object.  There
	  were several off-nominal paths that unbalanced the module ref count.  Also
	  the destructor freed the ao2 object itself which is bad.  Made the
	  smdi_read thread not hold its own ref to the SMDI interface object so when
	  all refs go away the destructor will stop the listener thread.

	  * Fixed the smdi_load() return code of 1 concerning the number of
	  listeners.  The test was inverted.

	  Change-Id: Ic288db51b58e395d6a2fc3847f77176c16988784

2018-10-02 16:23 +0000 [5b72bb0278]  Richard Mudgett <rmudgett@digium.com>

	* res_smdi.c: Made use defaults if the smdi.conf file does not exist.

	  This module is an optional dependency of a couple of other modules.  If it
	  declines to load, it then forces other modules that can optionally use
	  this module to also decline.

	  * Made use the default configuration if the config file does not exist and
	  simplified some of the logic.

	  Change-Id: Ib93191f1fe28c0dd9ebe3d84c7762b32f83c4eb9

2018-10-02 17:15 +0000 [fa9cd68589]  Corey Farrell <git@cfware.com>

	* astobj2: Comment on OBJ_NOLOCK in ao2_container_clone.

	  The test for OBJ_NOLOCK looks wrong but it isn't.  Add comments to
	  prevent confusion.

	  Change-Id: I9662b82eb39e7627a1f1944fd18f967a2b987344

2018-10-03 09:05 +0000 [8b3b504b79]  Sean Bright <sean.bright@gmail.com>

	* CI: Use brace expansion instead of calling out to seq

	  Also make the shebang in publishAsteriskDocs.sh the first line.

	  Change-Id: I3fdd6f22e652e4fb5b5fe85df46fa34eb6d0cf08

2018-10-03 08:59 +0000 [5f7350d68b]  Sean Bright <sean.bright@gmail.com>

	* CI: Use bindport instead of port in test http.conf

	  Change-Id: Ife9a6879da63a56e5b8348a2024eeed4e7b1615b

2018-10-03 07:56 +0000 [2b4752911f]  Sean Bright <sean.bright@gmail.com>

	* http.c: Reload TLS even if http.conf hasn't changed

	  There is currently no way to indicate to Asterisk that TLS certificates
	  and/or keys have been updated other than by modifying http.conf or
	  restarting Asterisk.

	  There is already code in main/tcptls.c that determines if a reload is
	  actually necessary based on the hashes of the certicate and dependent
	  files, so this change merely gives us a way to request a reload without
	  explicitly modifying http.conf.

	  Change-Id: Ie795420dcc7eb3d91336820688a29adbcc321276

2018-10-01 22:12 +0000 [3b2310332d]  Corey Farrell <git@cfware.com>

	* core: Disable astobj2 locking for some common objects.

	  * ACO options
	  * Indications
	  * Module loader ref_debug object
	  * Media index info and variants
	  * xmldoc items

	  These allocation locations were identified using reflocks.py on the
	  master branch.

	  Change-Id: Ie999b9941760be3d1946cdb6e30cb85fd97504d8

2018-10-02 13:29 +0000 [c2e6efa63d]  Richard Mudgett <rmudgett@digium.com>

	* res_statsd.c: Made use defaults if the statsd.conf file does not exist.

	  This module is an optional dependency of many modules.  If it declines to
	  load it then forces other modules that can optionally use this module to
	  also decline.

	  * Made use default configuration if there is a config error or the config
	  file does not exist.

	  Change-Id: If1068a582ec54ab7fb437265cb5370a97a825737

2018-09-13 13:03 +0000 [326574d4fc]  Corey Farrell <git@cfware.com>

	* Resolve warning about duplicate 'dialplan' CLI.

	  Change-Id: I029db1b4a32ccfb38374d6fe944dc430866f4b30

2018-10-02 01:33 +0000 [65f06a4505]  Corey Farrell <git@cfware.com>

	* loader: Fix result of module reload error.

	  When a module reload fails we never set AST_MODULE_RELOAD_ERROR.  This
	  caused reload failures to incorrectly report 'No module found'.

	  Change-Id: I5f3953e0f7d135e53ec797f24c97ee3f73f232e7

2018-09-28 10:13 +0000 [f066dbc353]  Corey Farrell <git@cfware.com>

	* loader: Improve error handling.

	  * Display list of unavailable dependencies when they cause another
	    module to fail loading.
	  * When a module declines to load find all modules which depend on it so
	    they can be declined and listed together.
	  * Prevent retry of declined modules during startup.
	  * When a module fails to dlopen try loading it with RTLD_LAZY so we can
	    attempt to display the list of missing dependencies.

	  These changes are meant to reduce logger spam that is caused when a
	  module has many dependencies and declines to load.  This also fixes some
	  error paths which failed to recognize required modules.

	  Module load/start errors are delayed until the end of loader startup.

	  Change-Id: I046052c71331c556c09d39f47a3b92975f3e1758

2018-09-25 16:19 +0000 [406c5bef0a]  Emmanuel BUU <emmanuel.buu@ives.fr>

	* core/frame: Fix ast_frdup() and ast_frisolate() for empty text frames

	  If a channel creates an AST_TEXT_FRAME with datalen == 0, the ast_frdup()
	  and ast_frisolate() functions could create a clone frame with an invalid
	  data.ptr which would cause a crash.  The proposed fix is to make sure that
	  for such empty text frames, ast_frdup() and ast_frisolate() return cloned
	  text frames with a valid data.ptr.

	  ASTERISK-28076
	  Reported by: Emmanuel BUU
	  Tested by: Emmanuel BUU

	  Change-Id: Ib882dd028598f13c4c233edbfdd7e54ad44a68e9

2018-09-30 23:11 +0000 [693e00eee6]  Corey Farrell <git@cfware.com>

	* astobj2: Record lock usage to refs log when DEBUG_THREADS is enabled.

	  When DEBUG_THREADS is enabled we can know if the astobj2 mutex / rwlock
	  was ever used, so it can be recorded in the REF_DEBUG destructor entry.

	  Create contrib/scripts/reflocks.py to process locking used by
	  allocator.  This can be used to identify places where
	  AO2_ALLOC_OPT_LOCK_NOLOCK should be used to reduce memory usage.

	  Change-Id: I2e3cd23336a97df2692b545f548fd79b14b53bf4

2018-10-01 12:11 +0000 [5a9230eacb]  Corey Farrell <git@cfware.com>

	* app_page: Add dependency against app_confbridge.

	  Change-Id: I1946509f518961d23fb21229d91676ee3e441921

2018-09-28 13:55 +0000 [a2554d5e5a]  Richard Mudgett <rmudgett@digium.com>

	* app_queue.c: Fix json ref leak

	  Declining the queue_member_status_type stasis message in stasis.conf
	  causes these messages to leak json objects.

	  * Add missing ast_json_unref() if the type is NULL in
	  queue_publish_member_blob().

	  ASTERISK-28084

	  Change-Id: I691ecf49bd1f7d9c29182e1eee8c4bb7103be9fc

2018-10-01 03:07 +0000 [266ed3d68b]  Corey Farrell <git@cfware.com>

	* Append CHANGES/UPGRADE.txt for module loader changes.

	  Change-Id: Ib8db4e14187f5c11ecbff532df17d30c5d36fa3e

2018-09-25 17:33 +0000 [ab90479642]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: improve realtime performance on CLI 'pjsip show contacts'

	  CLI command 'pjsip show contacts' inefficiently make a lot of DB requests.

	  For example if there are 10k aors then asterisk requests these 10k records
	  of aor and then does 10k requests of contact - one request per aor.

	  Even if use 'like <pattern>' the asterisk requests all aor's and contact's
	  records and then filters them by itself.

	  This patch gathers contact's container by
	  - retrieving all dynamic contacts by regex (filtered by reg_server)
	  - retrieving all aors with permanent contacts
	  - finally filters container by regex

	  ASTERISK-28077 #close

	  Change-Id: Id0ad65d14952a02fb213273a90f3f680a8149618

2018-09-28 14:45 +0000 [3337fe85c5]  Corey Farrell <git@cfware.com>

	* jansson-bundled: Add patches to improve json_pack error reporting.

	  Change-Id: I045e420d5e73e60639079246e810da6ae21ae22b

2018-09-27 19:32 +0000 [b3b95c8d36]  Corey Farrell <git@cfware.com>

	* lock: Improve performance of DEBUG_THREADS.

	  Add a volatile flag to lock tracking structures so we only need to use
	  the global lock when first initializing tracking.

	  Additionally add support for DEBUG_THREADS_LOOSE_ABI.  This is used by
	  astobj2.c to eliminate storage for tracking fields when DEBUG_THREADS is
	  not defined.

	  Change-Id: Iabd650908901843e9fff47ef1c539f0e1b8cb13b

2018-09-27 13:19 +0000 [b4ab26e72f]  George Joseph <gjoseph@digium.com>

	* app_confbridge:  Use bridge join hook to send join and leave events

	  The first attempt at publishing confbridge events to participants
	  involved publishing them at the same time stasis events were
	  created.  This caused issues with bridge and channel locks.  The
	  second attempt involved publishing them when the stasis events
	  were received by the code that published the confbridge AMI events.
	  This caused timing issues because, depending on resources available,
	  the event could be received before channels actually joined the
	  bridge and would therefore fail to send messages to the participant.

	  This attempt reverts to the original mechanism with one exception.
	  The join and leave events are published via bridge join and leave
	  hooks.  This guarantees the states of the channels and bridge and
	  provides deterministic timing for event publishing.

	  Change-Id: I2660074f8a30a5224cb953d5e047ee84484a9036

2018-09-27 04:51 +0000 [33455f8d6f]  Corey Farrell <git@cfware.com>

	* astobj2: Reduce memory overhead.

	  Reduce options to 2-bit field, magic to 30 bit field.  Move ref_counter
	  next to options and explicitly use int32_t so the fields will pack.

	  This reduces memory overhead for every ao2 object by 8 bytes on x86_64.

	  Change-Id: Idc1baabb35ec3b3d8de463c4fa3011eaf7fcafb5

2018-09-27 15:01 +0000 [d1698b4e0b]  Sean Bright <sean.bright@gmail.com>

	* config.c: Cleanup AST_INCLUDE_GLOB

	  * In main/config.c, AST_INCLUDE_GLOB is fixed to '1' making the #ifdefs
	    pointless.

	  * In utils/extconf.c, AST_INCLUDE_GLOB is never defined so there is a
	    lot of dead code.

	  Change-Id: I1bad1a46d7466ddf90d52cc724e997195495226c

2018-09-27 05:33 +0000 [0fe08c5e79]  Corey Farrell <git@cfware.com>

	* astobj2: Fix shutdown order.

	  When REF_DEBUG and AO2_DEBUG are both enabled we closed the refs log
	  before we shutdown astobj2_container.  This caused the AO2_DEBUG
	  container registration container to be reported as a leak.

	  Change-Id: If9111c4c21c68064b22c546d5d7a41fac430430e

2018-09-05 21:14 +0000 [958727cece]  Cao Minh Hiep <chiep@infinitalk.co.jp>

	* app_queue: Fix Attended transfer hangup with removing pending member.

	  This issue related to setting of holdtime, announcements, member delays.
	  It works well if we set the member delays to "0" and no announcements
	  and no holdtime.This issue will happen if we set member delays to "1",
	  "2"... or announcements or holdtime and hangs up the call during
	  processing it.

	  And here is the reason:
	  (At the step of answering a phone.)
	  It takes care any holdtime, announcements, member delays,
	  or other options after a call has been answered if it exists.

	  Normally, After the call has been aswered,
	  and we wait for the processing one of the cases of the member delays
	  or hold time or announcements finished, "if (ast_check_hangup(peer))"
	  will be not executed, then queue will be updated at update_queue().
	  Here, pending member will be removed.

	  However, after the call has been aswered,
	  if we hangs up the call during one of the cases of the member delays
	  or hold time or announcements, "if (ast_check_hangup(peer))"
	  will be executed.
	  outgoing = NULL and at hangupcalls, pending members will not be removed.

	  * This fixed patch will remove the pending member from container
	  before hanging up the call with outgoing is NULL.

	  ASTERISK-27920

	  Reported by: Cao Minh Hiep
	  Tested by: Cao Minh Hiep

	  Change-Id: Ib780fbf48ace9d2d8eaa1270b9d530a4fc14c855

2018-06-26 09:17 +0000 [1f68614f3c]  Moritz Fain <moritz@fain.io>

	* res_stasis: Fix stale data in ARI bridges

	  Fixed an issue that resulted in "Allocation failed" each time an ARI
	  request was made to start playing MOH on a bridge.

	  In bridge_moh_create() we were attaching the after bridge callbacks to
	  chan which is the ;1 channel of the unreal channel pair.  We should have
	  attached them to the ;2 channel which is pushed into the bridge by
	  ast_unreal_channel_push_to_bridge().  The callbacks are called when the
	  specific channel leaves the bridging system.  Since the ;1 channel is
	  never put into a bridge the callbacks never get called.  The callbacks
	  then never remove the moh_wrapper from the app_bridges_moh container.  As
	  a result we cannot find the channel associated with the wrapper to start
	  MOH because it has hungup.  This is the reason causing the reported issue.

	  * Rather than using after bridge callbacks to cleanup, we now have
	  moh_channel_thread() doing the cleanup when the channel hangs up.

	  * Fixed moh_channel_thread() accumulating control frames on the stasis
	  bridge MOH channel until MOH is stopped.  Control frames are no longer
	  accumulated while MOH is playing.

	  * Fixed channel ref counting issue.  stasis_app_bridge_moh_channel() may
	  or may not return a channel ref.  As a result ast_ari_bridges_start_moh()
	  wouldn't know it may have a channel ref to release.
	  stasis_app_bridge_moh_channel() will now return a ref with the channel it
	  returns.

	  * Eliminated RAII_VAR in bridge_moh_create().

	  ASTERISK-26094 #close

	  Change-Id: Ibff479e167b3320c68aaabfada7e1d0ef7bd548c

2018-09-10 11:28 +0000 [67e1e49e08]  Ben Ford <bford@digium.com>

	* res_rtp_asterisk.c: Add "seqno" strictrtp option

	  When networks experience disruptions, there can be large gaps of time
	  between receiving packets. When strictrtp is enabled, this created
	  issues where a flood of packets could come in and be seen as an attack.
	  Another option - seqno - has been added to the strictrtp option that
	  ignores the time interval and goes strictly by sequence number for
	  validity.

	  Change-Id: I8a42b8d193673899c8fc22fe7f98ea87df89be71

2018-09-20 13:59 +0000 [e04c49b517]  Alexei Gradinari <alex2grad@gmail.com>

	* res_odbc: fix missing SQL error diagnostic

	  On SQL error there is not diagnostic information about this error.
	  There is only
	  WARNING res_odbc.c: SQL Execute error -1!

	  The function ast_odbc_print_errors calls a SQLGetDiagField to get the number
	  of available diagnostic records, but the SQLGetDiagField returns 0.
	  However SQLGetDiagRec could return one diagnostic records in this case.

	  Looking at many example of getting diagnostics error information
	  I found out that the best way it's to use only SQLGetDiagRec
	  while it returns SQL_SUCCESS.

	  Also this patch adds calls of ast_odbc_print_errors on SQL_ERROR
	  to res_config_odbc.

	  ASTERISK-28065 #close

	  Change-Id: Iba5ae5470ac49ecd911dd084effbe9efac68ccc1

2018-09-26 08:12 +0000 [227d9719da]  George Joseph <gjoseph@digium.com>

	* CI:  Add --test-timeout option to runTestsuite.sh

	  The default is 600 seconds.
	  Also added timeouts to the *TestGroups.json files.

	  Change-Id: I8ab6a69e704b6a10f06a0e52ede02312a2b72fe0

2018-09-18 08:01 +0000 [681e115ff1]  Peter Katzmann <peter.katzmann@edag.de>

	* chan_sip: SipNotify on Chan_Sip vi AMI behave different to CLI

	  With tls and udp enabled asterisk generates a warning about sending
	  message via udp instead of tls.
	  sip notify command via cli works as expected and without warning.

	  asterisk has to set the connection information accordingly to connection
	  and not on presumption

	  ASTERISK-28057 #close

	  Change-Id: Ib43315aba1f2c14ba077b52d8c5b00be0006656e

2018-09-24 17:56 +0000 [cc8e0dfabd]  George Joseph <gjoseph@digium.com>

	* configure.ac:  Check for unbound version >= 1.5

	  In order to do this and provide good feedback, a new macro was
	  created (AST_EXT_LIB_EXTRA_CHECK) which does the normal check and
	  path setups for the library then compiles, links and runs a supplied
	  code fragment to do the final determination.  In this case, the
	  final code fragment compares UNBOUND_VERSION_MAJOR
	  and UNBOUND_VERSION_MINOR to determine if they're greater than or
	  equal to 1.5.

	  Since we require version 1.5, some code in res_resolver_unbound
	  was also simplified.

	  ASTERISK-28045
	  Reported by: Samuel Galarneau

	  Change-Id: Iee94ad543cd6f8b118df8c4c7afd9c4e2ca1fa72

2018-09-24 12:43 +0000 [7c49ea7cff]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Raise event when RTP port is allocated

	  This change raises a testsuite event to provide what port
	  Asterisk has actually allocated for RTP. This ensures that
	  testsuite tests can remove any assumption of ports and instead
	  use the actual port in use.

	  ASTERISK-28070

	  Change-Id: I91bd45782e84284e01c89acf4b2da352e14ae044

2018-07-16 22:55 +0000 [ede59966d9]  Corey Farrell <git@cfware.com>

	* jansson: Backport fixes to bundled, use json_vsprintf if available.

	  Use json_vsprintf from versions which contain fix for va_copy leak.

	  Apply fixes from jansson master:
	  * va_copy leak fix.
	  * Avoid potential invalid memory read in json_pack.
	  * Rename variable that shadowed another.

	  Change-Id: I7522e462d2a52f53010ffa1e7d705c666ec35539

2018-07-16 22:55 +0000 [7b0dbda936]  Corey Farrell <git@cfware.com>

	* json: Take advantage of new API's.

	  * Use "o*" format specifier for optional fields in ast_json_party_id.
	  * Stop using ast_json_deep_copy on immutable objects, it is now thread
	    safe to just use ast_json_ref.

	  Additional changes to ast_json_pack calls in the vicinity:
	  * Use "O" when an object needs to be bumped.  This was previously
	    avoided as it was not thread safe.
	  * Use "o?" and "O?" to replace NULL with ast_json_null().  The
	    "?" is a new feature of ast_json_pack starting with Asterisk 16.

	  Change-Id: I8382d28d7d83ee0ce13334e51ae45dbc0bdaef48

2018-09-17 15:35 +0000 [755febe497]  Kevin Harwell <kharwell@digium.com>

	* rtp_engine: rtcp_report_to_json can overflow the ssrc integer value

	  When writing an RTCP report to json the code attempts to pack the "ssrc" and
	  "source_ssrc" unsigned integer values as a signed int value type. This of course
	  means if the ssrc's unsigned value is greater than that which can fit into a
	  signed integer value it gets converted to a negative number. Subsequently, the
	  negative value goes out in the json report.

	  This patch now packs the value as a json_int_t, which is the widest integer type
	  available on a given system. This should make it so the value no longer
	  overflows.

	  Note, this was caught by two failing tests hep/rtcp-receiver/ and
	  hep/rtcp-sender.

	  Change-Id: I2af275286ee5e795b79f0c3d450d9e4b28e958b0

2018-09-21 14:32 +0000 [ba91c73f8e]  George Joseph <gjoseph@digium.com>

	* app_voicemail:  Fix stack overrun in append_mailbox

	  The append_mailbox function wasn't calculating the correct length
	  to pass to ast_alloca and it wasn't handling the case where context
	  might be empty.

	  Found by the Address Sanitizer.

	  Change-Id: I7eb51c7bd18a7a8dbdba261462a95cc69e84f161

2018-09-21 15:23 +0000 [0a1a96d331]  George Joseph <gjoseph@digium.com>

	* channel.c:  Address stack overflow in does_id_conflict()

	  does_id_conflict() was passing a pointer to an int to a callback
	  that expected a pointer to a size_t.

	  Found by the Address Sanitizer.

	  Change-Id: I0ff542067eef63a14a60301654d65d34fe2ad503

2018-09-21 10:19 +0000 [7a7b21f3a0]  Corey Farrell <git@cfware.com>

	* res_rtp_asterisk: Fix crash on ast_rtp_new failure.

	  ast_rtp_new free'd rtp upon failure, but rtp_engine.c would also call
	  the destroy callback.  Remove call to ast_free from ast_rtp_new, leave
	  it to rtp_engine.c to initiate the full cleanup.  Add error detection
	  for the ssrc_mapping vector initialization.  In rtp_allocate_transport
	  set rtp->s = -1 in the failure path where we close that FD to ensure we
	  don't try closing it twice.

	  ASTERISK-27854 #close

	  Change-Id: Ie02aecbb46228ca804e24b19cec2bb6f7b94e451

2018-09-20 15:26 +0000 [880905e7eb]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk: Reset all settings on module reload

	  'rtpchecksums' and 'rtcpinterval' are not being reset to their defaults
	  if they are not present in the updated configuration file.

	  Change-Id: I1162e40199314d46cf3225d5e1271c4c81176670

2018-09-20 10:15 +0000 [fa1b836374]  George Joseph <gjoseph@digium.com>

	* app_voicemail:  Cleanup mailbox topic and cache

	  app_voicemail wasn't properly cleaning up the stasis cache or the
	  mwi topic pool when the module was unloaded or when a user was
	  deleted as a result of a reload.  This resulted in leaks in both
	  areas.

	  * app_voicemail now calls ast_delete_mwi_state_full when it frees
	    a user structure and ast_delete_mwi_state_full in turn now calls
	    the new stasis_topic_pool_delete_topic function to clear the topic
	    from the pool.

	  Change-Id: Ide23144a4a810e7e0faad5a8e988d15947965df8

2018-08-16 10:45 +0000 [339bf0cf7b]  Sean Bright <sean.bright@gmail.com>

	* AST-2018-009: Fix crash processing websocket HTTP Upgrade requests

	  The HTTP request processing in res_http_websocket allocates additional
	  space on the stack for various headers received during an Upgrade request.
	  An attacker could send a specially crafted request that causes this code
	  to overflow the stack, resulting in a crash.

	  * No longer allocate memory from the stack in a loop to parse the header
	  values.  NOTE: There is a slight API change when using the passed in
	  strings as is.  We now require the passed in strings to no longer have
	  leading or trailing whitespace.  This isn't a problem as the only callers
	  have already done this before passing the strings to the affected
	  function.

	  ASTERISK-28013 #close

	  Change-Id: Ia564825a8a95e085fd17e658cb777fe1afa8091a

2018-09-20 09:41 +0000 [1a9c69d729]  George Joseph <gjoseph@digium.com>

	* stasis:  Add function to delete topic from pool

	  There's been a long standing leak when using topic pools.  The
	  topics in the pool get cleaned up when the last pool reference is
	  released but you can't remove a topic specifically.  If you reloaded
	  app_voicemail for instance, and mailboxes went away, their topics
	  were left in the pool.

	  * Added stasis_topic_pool_delete_topic() so modules can clean up
	    topics from pools.
	  * Registered the topic pool containers so it can be examined from
	    the CLI when AO2_DEBUG is enabled.  They'll be named
	    "<topic_pool_name>-pool".

	  Change-Id: Ib7957951ee5c9b9b4482af7b9b4349112d62bc25

2018-09-03 09:55 +0000 [8811ab1803]  David Hajek <david.hajek@daktela.com>

	* chan_sip.c: chan_sip unstable with TLS after asterisk start or reloads

	  Fixes random asterisk crash on start or reload with TLS phones.

	  ASTERISK-28034 #close
	  Reported-by: David Hajek

	  Change-Id: I2a859f97dc80c348e2fa56e918214ee29521c4ac

2018-09-20 04:48 +0000 [2f38bcdfc0]  Joshua Colp <jcolp@digium.com>

	* res_remb_modifier: Add module for controlling REMB from CLI.

	  This adds a module which registers a CLI command that can set the
	  REMB bitrate value for REMB as it enters or exits Asterisk. This
	  allows you to ignore what Asterisk or a client produces and is
	  useful for demonstrations.

	  This does not generate REMB frames, however, but just modifies
	  them as they flow to or from a channel.

	  Change-Id: Ib089427c46a4a36d645cecfe02406adb38c17bec

2018-09-14 15:51 +0000 [f6695249a5]  Richard Mudgett <rmudgett@digium.com>

	* stasis: No need to keep a stasis type ref in a stasis msg or cache object.

	  Stasis message types are global ao2 objects and we make stasis messages
	  and cache entries hold references to them.  Since there are currently
	  situations where cache objects are never deleted, the reference count on
	  the types can exceed 100000 and generate a FRACK assertion message.  The
	  stasis message cache could conceivably also have that many messages
	  legitimately on large systems.

	  The only down side to not holding the message type ref in the stasis
	  message is it only makes a crash either at shutdown or when manually
	  unloading a busy module slightly more likely.  However, this is more
	  exposing a pre-existing stasis shutdown ordering issue than a problem with
	  not holding a message type ref in stasis messages.

	  * Made stasis messages and cache entries no longer hold a ref to the
	  message type.

	  Change-Id: Ibaa28efa8d8ad3836f0c65957192424c7f561707

2018-09-18 13:59 +0000 [c008c27c85]  Richard Mudgett <rmudgett@digium.com>

	* pjproject: Update initial 2.8 patches to apply cleanly.

	  ASTERISK-28059

	  Change-Id: I027472f2753391646dde594a709a75f14422db93

2018-09-14 15:48 +0000 [192f71b7de]  Richard Mudgett <rmudgett@digium.com>

	* stasis_message.c: Don't create immutable stasis objects with locks.

	  * Create the stasis message object without a lock as it is immutable.
	  * Create the stasis message type object without a lock as it is immutable.
	  * Creating the stasis message type could crash if the passed in type name
	  is NULL and REF_DEBUG is enabled.  Added missing NULL check when passing
	  the ao2 object tag string.

	  Change-Id: I28763c58bb9f0b427c11971d0103bf94055e7b32

2018-09-17 11:38 +0000 [60258b4ec1]  Joshua Colp <jcolp@digium.com>

	* pjproject: Upgrade to 2.8.

	  This change brings in PJSIP 2.8, removes all the patches
	  that were merged upstream, and makes a minor change to
	  support a breaking change that was done.

	  ASTERISK-28059

	  Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189

2018-09-18 09:39 +0000 [3e48c34f14]  Florian Floimair <f.floimair@commend.com>

	* alembic: fix suppress_q850_reason_headers column name

	  In the original commit introducing the feature the column in the alembic
	  script was called 'suppress_q850_reason_header'.
	  In the code however the option is called 'suppress_q850_reason_headers'
	  (trailing 's'). This leads to errors when ARI push configuration is used.

	  Change-Id: Ie84808adbca6fcc9136556e4f5d741adbef5d14f

2018-09-13 07:55 +0000 [29115e2384]  George Joseph <gjoseph@digium.com>

	* app_voicemail: Remove need to subscribe to stasis

	  app_voicemail was using the stasis cache to build and maintain a
	  list of mailboxes that had subscribers.  It then used this list
	  to determine if a mailbox should be polled for new messages if
	  polling was enabled.  For this to work, stasis had to cache every
	  subscription and unsubscription to the mailbox which caused a lot of
	  overhead, both cpu and memory related.

	  Since polling is only required when changes are being made to
	  mailboxes outside of app_voicemail and since the number of mailboxes
	  that don't have any subscribers is likely to be very low, all
	  mailboxes are now polled instead of just the ones with subscribers.

	  This paves the way for disabling the caching of stasis subscription
	  change messages.

	  Also fixed cleanup in some of the unit tests that not only left
	  test users in the users list but also caused segfaults if the tests
	  were run more than once.

	  ASTERISK-27121

	  Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee

2018-09-18 06:08 +0000 [6e79e6b097]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Don't add declined stream if one does not exist.

	  Given a scenario where a session refresh was done with a removed
	  stream we would always add a removed stream to the outgoing SDP
	  even if one did not already exist.

	  This change makes it so that a removed stream is only placed into
	  the SDP if one already exists.

	  ASTERISK-28047

	  Change-Id: Ibb97d21cdeb87a8acae0c720861b0ff255708442

2018-09-17 10:38 +0000 [b0a0b975c5]  Sean Bright <sean.bright@gmail.com>

	* autoconf: Check for srtp_get_version_string() before using it

	  Change-Id: Id2a916ff9448706090e72ff2c7fb3f5ba24a05df

2018-09-17 07:10 +0000 [4a309839eb]  George Joseph <gjoseph@digium.com>

	* CI: Fix typo in testsuite git checkout

	  Change-Id: I30024515e5b00a5044fd39fbff27d818f016b719

2018-09-16 06:08 +0000 [55ca51af21]  Sean Bright <sean.bright@gmail.com>

	* res_srtp.c: Show linked version of libsrtp on module init

	  Change-Id: Ib0a645d6985de5757cc4399ed2524b2d02c4f342

2018-09-07 09:40 +0000 [887a315e17]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Log IPv6 addresses correctly

	  Both pjsip_tx_data.tp_info.dst_name and pjsip_rx_data.pkt_info.src_name
	  store IPv6 addresses without enclosing brackets. This causes some log
	  output to be confusing because it is difficult to separate the IPv6
	  address from a port specification.

	  * Use pj_sockaddr_print() along with pjsip_tx_data.tp_info.dst_addr and
	    pjsip_rx_data.pkt_info.src_addr where possible for consistent IPv6
	    output.

	  * When a pj_sockaddr is not available, explicitly wrap IPv6 addresses
	    in brackets.

	  * When assigning pjsip_rx_data.pkt_info.src_name ourselves, make sure
	    to also set pjsip_rx_data.pkt_info.src_addr.

	  Change-Id: I5cfe997ced7883862a12b9c7d8551d76ae02fcf8

2018-09-14 12:31 +0000 [3f9544c1f5]  George Joseph <gjoseph@digium.com>

	* CI: Use proper credentials for Security testsuite checkout

	  Can't do anonymous http checkout from Security-testsuite.
	  Need to use same credentials as the gerrit review checkout.

	  Change-Id: I87af68c995cb8926f5e87f9af245600d76984f05

2018-09-13 11:06 +0000 [17d6d9e1e7]  George Joseph <gjoseph@digium.com>

	* stasis_cache:  Stop caching stasis subscription change messages

	  Since app_voicemail no longer uses the cache to maintain its state
	  there is no longer a need to cache these messages.

	  ASTERISK-27121

	  Change-Id: I321c708505f5ad8d00e1b0afc4c27dc2ac12ecb4

2018-09-12 12:39 +0000 [5842741689]  Corey Farrell <git@cfware.com>

	* CI: Use .gitreview to default BRANCH_NAME.

	  This ensures that binary modules are avoided in the master branch even
	  if BRANCH_NAME is not set.

	  Change-Id: I79162d2063f22fa9d6b31fde4827ace2dd5bf0da

2018-09-11 07:22 +0000 [78453e65fd]  Walter Doekes <walter+asterisk@wjd.nu>

	* optional_api: Remove unused nonoptreq fields

	  As they're not actively used, they only grow stale. The moduleinfo field itself
	  is kept in Asterisk 13/15 for ABI compatibility.

	  ASTERISK-28046 #close

	  Change-Id: I8df66a7007f807840414bb348511a8c14c05a9fc

2018-09-03 06:50 +0000 [f4bffe2326]  lvl <digium@lvlconsultancy.nl>

	* manager: Set AMI event "Newexten" to the EVENT_FLAG_DIALPLAN class

	  The documentation already specified EVENT_FLAG_DIALPLAN for this
	  event, but the implementation was using EVENT_FLAG_CALL.

	  Using EVENT_FLAG_DIALPLAN allows AMI clients to opt out of receiving
	  this highly verbose event.

	  ASTERISK-28033

	  Change-Id: I45b3119f30e4dbc17b49831f2b1a4f2c1beadafe

2018-09-12 07:18 +0000 [e5739c494c]  Sean Bright <sean.bright@gmail.com>

	* res_pjproject: Fix sockaddr conversion routines for non-bundled PJSIP

	  The bundled version of pjproject has a patch for Solaris compatability
	  that changes the definition of various socket structures which we need
	  to account for when compiling against a non-bundled version.

	  ASTERISK-28049 #close

	  Change-Id: Ia1ea47c433fc2d915115193ee889a752373925f0

2018-09-10 22:28 +0000 [ecb3b23b07]  Corey Farrell <git@cfware.com>

	* Build System: Resolve conflict between DESTDIR and bundled jansson.

	  If Asterisk is built using a DESTDIR this will cause the bundled jansson
	  to be installed to an unexpected location and we will fail to find it.

	  Change-Id: Id033e2813261e0d45232383d44c6391122169548

2018-08-30 03:42 +0000 [ccfd2e0f5d]  Frederic LE FOLL <frederic.lefoll@c-s.fr>

	* res_musiconhold.c: Restart MOH if previous hold just reached end-of-file

	  On MOH activation, moh_files_readframe() is called while the current
	  stream attached to the channel is NULL and it calls ast_moh_files_next()
	  immediately.  However, it won't call ast_moh_files_next() again if sample
	  reading fails.  The failure may occur because res_musiconhold retains the
	  last sample reading position in the channel data and MOH during the
	  previous hold/retrieve just reached EOF.  Obviously, a bit of bad luck is
	  required here.

	  * Restructured moh_files_readframe() to try a second time to start MOH if
	  there was no stream setup and the saved position was at EOF.  Also added
	  comments describing what is going on for each step.

	  ASTERISK-28029

	  Change-Id: I1508cf2c094f8feca22d6f76deaa9fdfa9944860

2018-09-05 06:39 +0000 [af6a3d02e1]  Joshua Colp <jcolp@digium.com>

	* core: Don't stop generators when writing RTCP frames.

	  Generators provide such functionality as tone generation or
	  silence generation. RTCP frames provide RTCP information and
	  should not stop generators from operating.

	  ASTERISK-28005

	  Change-Id: Ieadada07b068a7aa426e8763f1b73a18e1ac34a9

2018-09-03 06:28 +0000 [034a3d8b86]  lvl <digium@lvlconsultancy.nl>

	* app_queue: Update realtime queuemembers after wait_a_bit(), not before

	  This ensures the most up-to-date information is used for the next
	  call attempt.

	  ASTERISK-28032

	  Change-Id: I02fc17c6ffb50bb60ea97c2d2e6023e8061815ce

2018-08-28 08:42 +0000 [3134fd95a9]  Sean Bright <sean.bright@gmail.com>

	* res_pjproject: Add utility functions to convert between socket structures

	  Currently, to convert from a pj_sockaddr to an ast_sockaddr, the address
	  needs to be rendered to a string and then parsed into the correct
	  structure. This also involves a call to getaddrinfo(3). The same is true
	  for the inverse operation.

	  Instead, because we know the internal structure of both ast_sockaddr and
	  pj_sockaddr, we can translate directly between the two without the
	  need for an intermediate string.

	  Change-Id: If0fc4bba9643f755604c6ffbb0d7cc46020bc761

2018-08-30 13:08 +0000 [9fb166cf3b]  George Joseph <gjoseph@digium.com>

	* stasis_cache: Prune stasis_subscription_change messages

	  The stasis cache provides a way to reconstruct the current state
	  of topic subscribers.  Unfortunately, since every subscribe and
	  unsubscribe is cached, the cache continues to grow unabated while
	  asterisk is running.  This patch removes subscribe messages from
	  the cache when the corresponding unsubscribe is received.

	  This patch also registers the cache containers with ao2 so that if
	  AO2_DEBUG is turned on, you can list the container and get its
	  stats from the CLI.

	  ASTERISK-27121

	  Change-Id: I3d18905e477f3721815da91f30da8d3fbb2d4f56

2018-09-03 09:27 +0000 [8879a62c1c]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_dial: set the comment for OPT_ARG_ANNOUNCE to really what is done

	  Change-Id: I08f88adb09f7e5813f37e70fecd787468cdb32c8

2018-08-15 14:27 +0000 [cfb854e241]  Chris-Savinovich <csavinovich@digium.com>

	* pbx_config.c: Fix reloading module if initially declined to load

	  Added decline if extensions.conf file not available
	  when loading pbx_config, and also made sure everything
	  gets properly unregistered and/or destroyed on unload.

	  Change-Id: Ib00665106043b1be5148ffa7a477396038915854

2018-08-30 14:42 +0000 [4fcdcfaa37]  Richard Mudgett <rmudgett@digium.com>

	* http.c: Give HTTP error response when received lines are too long.

	  Added a check when we receive a HTTP request line or header line that is
	  too long.  We now return an error response to the sender because we are
	  not able to process the request.

	  Change-Id: I6df2705435fd7dde4d5d3bdf7acec859cfb7c12d

2018-08-29 16:14 +0000 [f6a165208b]  Richard Mudgett <rmudgett@digium.com>

	* iostream.c: Fix ast_iostream_gets() needlessly returning failure.

	  Providing a buffer larger than the internal buffer of ast_iostream_gets()
	  fails to get lines longer than the internal buffer.

	  * Made ast_iostream_gets() fill the supplied buffer with read data until
	  either a '\n' is found or the supplied buffer is filled just like fgets().

	  Change-Id: If18b3f6ee500e22f0633a68779ed09f7e0f305ed

2018-08-06 15:37 +0000 [4dd8b5bbb4]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix mwi_subscribe_replaces_unsolicited type mismatch

	  ASTERISK-27988

	  Change-Id: Iccafdd0552ea8aaed647620fb14499f1bf341843

2018-08-16 09:04 +0000 [1edd9eb309]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* make config: os-release output error.

	  Fix not show the error
	  "/bin/sh: /etc/os-release: No such file or directory" when the command
	  'make config' is run in a System without systemv.

	  The instruction 'make config' pre execute the syntax
	  "$(shell . /etc/os-release && echo $$ID)" to identified if system is a
	  Slackware and Opensuse.

	  This change prevent show the message and is send to the /dev/null

	  Change-Id: I7f43e281a8d9405b2519fc653de82d9b8b645fdf

2018-08-29 05:18 +0000 [390d0b42ca]  Joshua Colp <jcolp@digium.com>

	* res_fax: Handle fax gateway being started more than once.

	  The T.38 fax gateway state machine can cause the fax gateway
	  to be started more than once on a channel depending on the
	  responses of the remote endpoint. This would previously leak
	  the channel name, channel unique id, and underlying fax engine
	  state. This change instead makes it so that if the fax gateway
	  session is already present and not reserved the fax gateway
	  is not started again.

	  ASTERISK-27981

	  Change-Id: I552d95086860cb18f2522ee40ef47b13b6da2e0e

2018-08-28 08:01 +0000 [245fb462d6]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_transport_websocket: Properly set src_name for IPv6

	  SIP responses over WebSockets when the client is using IPv6 have invalid
	  Via headers according to RFC 3261. The 'received' header parameter
	  should not be wrapped in brackets if it is an IPv6 address.

	  When src_name is populated by the built-in PJSIP transports, the code
	  uses pj_sockaddr_print() with 'flags' set to 0, meaning that the
	  brackets are not rendered around IPv6 addresses.

	  This may be related to ASTERISK~27101.

	  See also: https://github.com/onsip/SIP.js/pull/594

	  ASTERISK-28020 #close

	  Change-Id: I8ea9d289901b837512bee2ca2535e3dc14f04d77

2018-08-26 13:18 +0000 [1b1f47bef6]  Corey Farrell <git@cfware.com>

	* Create --disable-binary-modules option.

	  This new option can be passed for ./configure or
	  ./tests/CI/buildAsterisk.sh to prevent download/install of binary
	  modules.

	  Normally enabling the categories MENUSELECT_CODECS or MENUSELECT_RES
	  will result in binary modules being enabled even if the build target is
	  incompatible with those modules.  This includes CI scripts which enable
	  categories before disabling specific modules.

	  If more binary modules are offered in the future this will help avoid
	  accidentally downloading them if unwanted or incompatible.  Adding a
	  binary module will only require creating a new menuselect entry similar
	  to the existing ones, it will not be necessary to modify the CI scripts.

	  Change-Id: I6b1bd1c75a2e48f05b8b8a45b7a7a2d00a079166

2018-08-21 07:59 +0000 [aa2755cbb3]  Emmanuel BUU <emmanuel.buu@ives.fr>

	* res/res_rtp_asterisk: remove debug traces generated by an empty frame

	  The realtime text timer pops regularly and sends text frames even if
	  the buffer is empty. This causes a lot of unecessary debug logging.

	  * Made red_write() test if we need to send a frame before calling
	  ast_rtp_write()

	  ASTERISK-28002
	  Reported by: Emmanuel BUU
	  Tested by: Emmanuel BUU

	  Change-Id: Icf81310c3b8080b615a42060afc02ab41f9523dd

2018-08-13 08:12 +0000 [46442aa9e5]  Jaco Kroon <jaco@uls.co.za>

	* chan_sip: improved ip:port finding of peers for non-UDP transports.

	  Also remove function peer_ipcmp_cb since it's not used (according to
	  rmudgett).

	  Prior to b2c4e8660a9c89d07041271371151779b7ec75f6 (ASTERISK_27457)
	  insecure=port was the defacto standard.  That commit also prevented
	  insecure=port from being applied for sip/tcp or sip/tls.

	  Into consideration there are three sets of behaviour:

	  1.  "previous" - before the above commit.
	  2.  "current" - post above commit, pre this one.
	  3.  "new" - post this commit.

	  The problem that the above commit tried to address was guests over TCP.
	  It succeeded in doing that but broke transport!=udp with host!=dynamic.

	  This commit attempts to restore sane behaviour with respect to
	  transport!=udp for host!=dynamic whilst still retaining the guest users
	  over tcp.

	  It should be noted that when looking for a peer, two passes are made, the
	  first pass doesn't have SIP_INSECURE_PORT set for the searched-for peer,
	  thus looking for full matches (IP + Port), the second pass sets
	  SIP_INSECURE_PORT, thus expecting matches on IP only where the matched
	  peer allows for that (in the author's opinion:  UDP with insecure=port,
	  or any TCP based, non-dynamic host).

	  In previous behaviour there was special handling for transport=tcp|tls
	  whereby a peer would match during the first pass if the utilized
	  transport was TCP|TLS (and the peer allowed that specific transport).

	  This behaviour was wrong, or dubious at best.  Consider two dynamic tcp
	  peers, both registering from the same IP (NAT), in this case either peer
	  could match for connections from an IP.  It's also this behaviour that
	  prevented SIP guests over tcp.

	  The above referenced commit removed this behaviour, but kept applying
	  the SIP_INSECURE_PORT only to WS|WSS|UDP.  Since WS and WSS is also TCP
	  based, the logic here should fall into the TCP category.

	  This patch updates things such that the previously non-explicit (TCP
	  behaviour) transport test gets performed explicitly (ie, matched peer
	  must allow for the used transport), as well as the indeterministic
	  source-port nature of the TCP protocol is taken into account.  The new
	  match algorithm now looks like:

	  1.  As per previous behaviour, IP address is matched first.

	  2.  Explicit filter with respect to transport protocol, previous
	      behaviour was semi-implied in the test for TCP pure IP match - this now
	      made explicit.

	  3.  During first pass (without SIP_INSECURE_PORT), always match on port.

	  4.  If doing UDP, match if matched against peer also has
	      SIP_INSECURE_PORT, else don't match.

	  5.  Match if not a dynamic host (for non-UDP protocols)

	  6.  Don't match if this is WS|WSS, or we can't trust the Contact address
	      (presumably due to NAT)

	  7.  Match (we have a valid Contact thus if the IP matches we have no
	      choice, this will likely only apply to non-NAT).

	  To logic-test this we need a few different scenarios.  Towards this end,
	  I work with a set number of peers defined in sip.conf:

	  [peer1]
	  host=1.1.1.1
	  transport=tcp

	  [peer2]
	  host=1.1.1.1
	  transport=udp

	  [peer3]
	  host=1.1.1.1
	  port=5061
	  insecure=port
	  transport=udp

	  [peer4]
	  host=1.1.1.2
	  transport=udp,tcp

	  [peer5]
	  host=dynamic
	  transport=udp,tcp

	  Test cases for UDP:

	  1 - incoming UDP request from 1.1.1.1:
	    - previous:
	      - pass 1:
	        * peer1 or peer2 if from port 5060 (indeterminate, depends on peer
	          ordering)
	        * peer3 if from port 5061
	        * peer5 if registered from 1.1.1.1 and source port matches
	      - pass 2:
	        * peer3
	    - current: as per previous.
	    - new:
	      - pass 1:
	        * peer2 if from port 5060
	        * peer3 if from port 5061
	        * peer5 if registered from 1.1.1.1 and source port matches
	      - pass 2:
	        * peer3

	  2 - incoming UDP request from 1.1.1.2:
	    - previous:
	      - pass 1:
	        * peer5 if registered from 1.1.1.2 and port matches
	        * peer4 if source port is 5060
	      - pass 2:
	        * no match (guest)
	    - current: as previous.
	    - new as previous (with the variation that if peer5 didn't have udp as
	            allowed transport it would not match peer5 whereas previous
	            and current code could).

	  3 - incoming UDP request from anywhere else:
	    - previous:
	      - pass 1:
	        * peer5 if registered from that address and source port matches.
	      - pass 2:
	        * peer5 if insecure=port is additionally set.
	        * no match (guest)
	    - current - as per previous
	    - new - as per previous

	  Test cases for TCP based transports:

	  4 - incoming TCP request from 1.1.1.1
	    - previous:
	      - pass 1 (indeterministic, depends on ordering of peers in memory):
	        * peer1; or
	        * peer5 if peer5 registered from 1.1.1.1 (irrespective of source port); or
	        * peer2 if the source port happens to be 5060; or
	        * peer3 if the source port happens to be 5061.
	      - pass 2: cannot happen since pass 1 will always find a peer.
	    - current:
	      - pass 1:
	        * peer1 or peer2 if from source port 5060
	        * peer3 if from source port 5060
	        * peer5 if registered as 1.1.1.1 and source port matches
	      - pass 2:
	        * no match (guest)
	    - new:
	      - pass 1:
	        * peer 1 if from port 5060
	        * peer 5 if registered and source port matches
	      - pass 2:
	        * peer 1

	  5 - incoming TCP request from 1.1.1.2
	    - previous (indeterminate, depends on ordering):
	      - pass 1:
	        * peer4; or
	        * peer5 if peer5 registered from 1.1.1.2
	      - pass 2: cannot happen since pass 1 will always find a peer.
	    - current:
	      - pass 1:
	        * peer4 if source port is 5060
	        * peer5 if peer5 registered as 1.1.1.2 and source port matches
	      - pass 2:
	        * no match (guest).
	    - new:
	      - pass 1:
	        * peer4 if source port is 5060
	        * peer5 if peer5 registered as 1.1.1.2 and source port matches
	      - pass 2:
	        * peer4

	  6 - incoming TCP request from anywhere else:
	    - previous:
	      - pass 1:
	        * peer5 if registered from that address
	      - pass 2: cannot happen since pass 1 will always find a peer.
	    - current:
	      - pass 1:
	        * peer5 if registered from that address and port matches.
	      - pass 2:
	        * no match (guest)
	    - new: as per current.

	  It should be noted the test cases don't make explicit mention of TLS, WS
	  or WSS.  WS and WSS previously followed UDP semantics, they will now
	  enforce source port matching.  TLS follow TCP semantics.

	  The previous commit specifically tried to address test-case 6, but broke
	  test-cases 4 and 5 in the process.

	  ASTERISK-27881 #close

	  Change-Id: I61a9804e4feba9c7224c481f7a10bf7eb7c7f2a2

2018-08-20 07:23 +0000 [d84de695ed]  Jaco Kroon <jaco@uls.co.za>

	* AMI: be less verbose when adding HTTP headers to AMI/HTTP messages.

	  All HTTP/AMI message headers are being sent to the verbose channel.
	  There are multiple places this is happening.  Consolidate the loop into
	  a function.  Drop the debug/verbose message.

	  Convert to using ast_asprintf to perform the length calculation, memory
	  allocation and snprintf all in one step.

	  Change-Id: Ic45e673fde05bd544be95ad5cdbc69518207c1a1

2018-08-22 10:50 +0000 [4188e7d6dd]  Matthew Fredrickson <creslin@digium.com>

	* sample_configs: noload res_hep.so by default

	  Change disables loading of res_hep.so in default installation.  Loading
	  res_hep has a performance impact whether it's used or not.  This disables
	  loading of it in sample config files.

	  Change-Id: I5ec150cf941634fabc72973e5bf1a965cb0ef9d0
	  (cherry picked from commit c8bacd45f17d2ae6f6d05c8cff538dd651f683a6)

2018-08-23 06:57 +0000 [595e358761]  Florian Floimair <f.floimair@commend.com>

	* alembic: increase uri column size

	  When mobile SIP clients register with Asterisk that use some sort of
	  push notifications, the URI can get quite lengthy due to the
	  additional push-service annotations (things like tokens, pn-type, etc.)
	  contained in it.

	  ASTERISK-28022 #close

	  Change-Id: I6c55013bafe79f7e7a1fb6722d2558f553709f2e

2018-08-21 13:50 +0000 [4b88cb383d]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Silence GCC 8 compiler warning

	  I'm only seeing an error in 14+, so I assume it is due to different
	  compiler options:

	  app_queue.c: In function ‘handle_queue_add_member’:
	  app_queue.c:10234:19: error: ‘%d’ directive writing between 1 and 11
	      bytes into a region of size 3 [-Werror=format-overflow=]
	       sprintf(num, "%d", state);
	                     ^~
	  app_queue.c:10234:18: note: directive argument in the range
	      [-2147483648, 99]
	       sprintf(num, "%d", state);
	                    ^~~~

	  Compiler: gcc version 8.0.1 20180414 (experimental)
	      [trunk revision 259383] (Ubuntu 8-20180414-1ubuntu2) 

	  Change-Id: I18577590da46829c1ea7d8b82e41d69f105baa10

2018-08-20 11:23 +0000 [fb2f242c49]  Richard Mudgett <rmudgett@digium.com>

	* AMI: Remove docs for nonexistent AMI ContactStatus event headers

	  Change-Id: I5736965c64c44338f7330e85a24bb46818607f19

2018-08-06 06:22 +0000 [b9cd4c6d92]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Reduce processing when a Contact is updated.

	  When a Contact is updated the only material change that qualify
	  support cares about is the underlying configuration for the AOR.
	  In this case we will update things with the new AOR information but
	  otherwise the callback to indicate the Contact has changed can be
	  ignored.

	  This is because it is only when a Contact is added or deleted that
	  material changes occur within the qualify support. An update can't
	  change the URI since it would result in a new Contact so it can be
	  ignored.

	  Change-Id: I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d

2018-08-10 19:28 +0000 [236826a111]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_t38.c: Fix crash if already saw a final T.38 reINVITE response.

	  We were still getting crashes after the first fix.  Somehow we receive a
	  non-2xx final response before we get a 200 final response.  With the
	  failure response we had already cleaned up and destroyed some data
	  structures.  When the unexpected 200 response comes in we crash.

	  * Add protection code to prevent processing another final T.38 reINVITE
	  response.

	  ASTERISK-27944

	  Change-Id: I8b5baba8d07fe4d63f0d7d05d3eb9a3d27d40a74

2018-08-09 18:46 +0000 [19298141cf]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_realtime.c: Fix unqualified fetch warning.

	  The allow_unqualified_fetch option for the sorcery realtime backend
	  blocked actually fetching all rows when the option is set to warn.

	  * Made issue a warning and actually do the request when
	  allow_unqualified_fetch=warn is set.

	  Change-Id: I74456c80a03a62dce66fc3dc3cb0cf2351ac4312

2018-06-11 00:07 +0000 [f6c1d94d91]  Kirsty Tyerman <ktyerman@barrukka.local>

	* pbx_dundi: Added IPv6 support for dundi

	  Change includes move to netsock2 library.

	  ASTERISK-27164
	  Reported-by: Adam Secombe

	  Change-Id: Ia9e8dc3d153de7a291dbda4bd87fc827dd2bb846

2018-08-15 21:31 +0000 [4e43823d19]  Richard Mudgett <rmudgett@digium.com>

	* pbx_dundi.c: Misc memory management fixes when destroying peers

	  * In destroy_peer(), fixed memory leaks of lookup history strings and
	  qualify transactions when destroying peers.

	  * In destroy_peer(), fixed leaving the registerexpire scheduled callback
	  active when a peer is destroyed on a reload.  The reload marks and sweeps
	  peers so any peers not explicitly configured get destroyed.  Peers created
	  dynamically from the '*' peer will not exist until they re-register after
	  the reload.  These destroyed peers caused memory corruption when the
	  registerexpire timer expired.

	  * Made build_peer() not schedule any callbacks on the '*' peer
	  (empty_eid).  It is a special peer that is cloned to dynamically created
	  peers so it doesn't actually get involved in any message transactions.

	  * Made do_register_expire() remove the dundi/dpeers AstDB entry when a
	  peer registration expires.

	  * Fix deep_copy_peer() to not copy some things that cannot be copied to
	  the cloned peer structure.  Timers, message transactions, and lookup
	  history are specific to a peer instance.

	  * Made set_config() lock around processing the mappings configuration.

	  * Reordered unload_module() to handle load_module() declining the load due
	  to error.

	  Change-Id: Ib846b2b60d027f3a2c2b3b563d9a83a357dce1d6

2018-08-15 23:49 +0000 [857926d197]  Richard Mudgett <rmudgett@digium.com>

	* pbx_dundi.c: Handle thread shutdown better.

	  Change-Id: Id52f99bd6a948fe6dd82acc0a28b2447a224fe87

2018-08-15 18:14 +0000 [111e73678e]  Richard Mudgett <rmudgett@digium.com>

	* pbx_dundi: Fix debug frame decode string.

	  * Fixed a typo in the name of the REGREQ frame decode string array.
	  * Fixed off by one range check indexing into the frame decode string
	  array.
	  * Removed some unneeded casts associated with the decode string array.

	  Change-Id: I77435e81cd284bab6209d545919bf236ad7933c2

2018-08-16 16:21 +0000 [a7ace944ae]  Richard Mudgett <rmudgett@digium.com>

	* pbx_dundi: Update sample config documentation.

	  Change-Id: I33d0ad0611c2124ca3440f0f811fa0f45e4e2849

2018-08-15 14:44 +0000 [0874d5b316]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Fix unused variable warnings

	  Compiling without SRTP support installed resulted in some unused variable
	  warnings.  These warnings also showed that the srtp variable was obtained
	  and passed around some functions but not really used even when a system
	  has SRTP installed.

	  Change-Id: I6daad34be3e89b19adef6e2fbe738018975155fc

2018-08-16 13:51 +0000 [df78227e4a]  George Joseph <gjoseph@digium.com>

	* CI: Fixup for non-13 branches

	  Change-Id: I5e1d4a09e58b92b541bc8ed6f9e10e54c4e5101f

2018-08-16 13:28 +0000 [4ca959c72c]  George Joseph <gjoseph@digium.com>

	* CI:  Final version of setting correct gerrit creds

	  Change-Id: I7729ecceedceb12f52bf18dae259846aa1d993b3

2018-08-16 12:08 +0000 [33a5b8ccaf]  George Joseph <gjoseph@digium.com>

	* CI:  Add https credentials to gerrit checkouts

	  If the review to be tested is in a project with restricted access,
	  we need to use the jenkins user's gerrit https credentials when we
	  do the checkout or the checkout will fail.

	  Change-Id: I9dc9994763c5ebfeb9f1cff60fb53f6902b7fd5f

2018-08-09 02:34 +0000 [0d4bde84d1]  Torrey Searle <torrey@voxbone.com>

	* res/res_pjsip_sdp_rtp:  put rtcp-mux in answer only if offered

	  If in the initial sdp the caller doesn't include the line
	  a=rtcp-mux

	  Then asterisk shoud not include rtcp-mux in the response regardless
	  of rtcp-mux being enabled on the endpoint

	  ASTERISK-28007 #close

	  Change-Id: I58e9b9f40a139afc0da5de41906cc608fb62adc7

2018-08-15 14:49 +0000 [167efe3a47]  Corey Farrell <git@cfware.com>

	* res_resolver_unbound: Fix leak of config nameserver strings.

	  Change-Id: I3f396316bb40d1ae6e91f5f688042420f1a540ed

2018-08-15 13:51 +0000 [72dbc9fb70]  Corey Farrell <git@cfware.com>

	* res_pjsip: Resolve transport management leak at shutdown.

	  Cleanup idle check scheduled events at shutdown.

	  Change-Id: I61bfbb56bac69fe840c3242927d31ff3593be461

2018-08-15 11:12 +0000 [6e0f4a2127]  Corey Farrell <git@cfware.com>

	* res_pjsip: Fix leak in pjsip_options.

	  sip_options_get_endpoint_state_compositor_state leaked a reference to
	  the first available endpoint state compositor that was found.

	  Change-Id: Idb6be19f7219b6eed1dfb19c1e740dd40cb3fdc7

2018-08-15 11:31 +0000 [b370482786]  Corey Farrell <git@cfware.com>

	* res_odbc: Allow unload at shutdown.

	  This makes it possible for REF_DEBUG to report no leaks when loading
	  res_odbc.

	  Change-Id: I1a3dea786bd6e7f4820a6dd5cbaa197fa783ce93

2018-07-31 23:54 +0000 [d61a8791b5]  Corey Farrell <git@cfware.com>

	* Build System: Improve ccache matching for different menuselect options.

	  Changing any Menuselect option in the `Compiler Flags` section causes a
	  full rebuild of the Asterisk source tree.  Every enabled option causes
	  a #define to be added to buildopts.h, thus breaking ccache caching for
	  every source file that includes "asterisk.h".  In most cases each option
	  only applies to one or two files.  Now we only define those options for
	  the specific sources which use them, this causes much better cache
	  matching when working with multiple builds.  For example testing code
	  with an without MALLOC_DEBUG will now use just over half the ccache
	  size, only main/astmm.o will have two builds cached instead of every
	  file.

	  Reorder main/Makefile so _ASTCFLAGS set on specific object files are all
	  together, sorted by filename.  Stop adding -DMALLOC_DEBUG to CFLAGS of
	  bundled pjproject, this define is no longer used by any header so only
	  serves to break cache.

	  The only code change is a slight adjustment to how main/astmm.c is
	  initialized.  Initialization functions always exist so main/asterisk.c
	  can call them unconditionally.  Additionally rename the astmm
	  initialization functions so they are not exported.

	  Change-Id: Ie2085237a964f6e1e6fff55ed046e2afff83c027

2018-08-14 11:55 +0000 [0e4f5f5189]  Richard Mudgett <rmudgett@digium.com>

	* contrib/scripts: Make astgenkey executable

	  Change-Id: I11641d65592536dea9cbca5aa94a24c25d24dd5f

2018-08-14 07:29 +0000 [56c1285b8a]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_caller_id: Add "party" parameter to RPID header.

	  This change adds the "party" parameter to the Remote-Party-ID header
	  which indicates which party the header information is applicable
	  to. In Asterisk this is determined on whether we are the calling
	  or called party. This is added to improve interoperability with some
	  implementations.

	  ASTERISK-28006

	  Change-Id: I1eec3e377ffff8633b5c1dd59a05e9533122cfca

2018-07-19 22:28 +0000 [3bf968470b]  Corey Farrell <git@cfware.com>

	* CI: Add support for coverage processing.

	  Enable coverage with `./tests/CI/buildAsterisk.sh --coverage`.  This
	  will cause Asterisk to be compiled with coverage support.  It also
	  initializes 'before' coverage data for all sources.  Accept
	  --tested-only to disable modules which are not run by any test.
	  Enabling coverage also sets tested-only true by default.  To build
	  everything with coverage enabled use `--coverage --tested-only=0`.

	  ./tests/CI/processCoverage.sh is used to process the coverage and
	  generate HTML reports.

	  Fix utils/check_expr2 which failed to compiled with coverage enabled.

	  Add status output 5 times per stage of astobj2_test_perf to ensure
	  remote CLI does not timeout when compiled with coverage.  Remote CLI
	  disconnects if no output is received for 60 seconds.  When coverage is
	  enabled it takes about 70 seconds for my laptop to run the stages of
	  this test, so with the change a message is printed every 14 seconds.

	  Change-Id: I890f7d5665087426ad7d3e363187691b9afc2222

2018-08-07 10:57 +0000 [a46fcaca7b]  Ben Ford <bford@digium.com>

	* res_pjsip/rtp: No joint capabilities between streams.

	  When a conference contained a mixture of audio/video and audio-only
	  users, a NOTICE message would pop up stating there are no joint
	  capabilities between streams. This happens because streams can never be
	  removed, but they can be in a REMOVED state. If we have the scenario
	  where user A joins with audio/video, user B joins with audio-only, and
	  user C joins with audio/video, then user A leaves, the message would
	  be triggered. That removed stream is still in the SDP, but Asterisk
	  would pass it through, causing it to be seen as a ulaw stream. A check
	  has been added for removed streams, setting their status to REMOVED when
	  handling negotiated SDPs.

	  Also addressed an issue where user A joins, then user B joins but does
	  not receive video until much later. Full frames were not being sent,
	  causing some PLI from the browser. Because the video was flowing in one
	  direction, the browser sets the SSRC to 1, but Asterisk was dropping the
	  PLI because of that. Added a check to see if the SSRC is 1 or not, which
	  sends full frames and allows video to flow between user A and user B.
	  This should only happen when dealing with PSFB or FUR, and in the case
	  of PSFB, only for PLI.

	  ASTERISK-27398

	  Change-Id: I26e7c6f101bc119549eeca406b5bcd25ad8ebc5e

2018-08-12 11:04 +0000 [fce68efbbe]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* app_queue: set QUEUESTATUS to LEAVEEMPTY instead of CONTINUE

	  When a call leaves a queue on leaveempty condition, QUEUESTATUS
	  must be set to LEAVEEMPTY, no matter whether Queue was executed with or
	  without the "c" (continue) option.

	  The regression was introduced in the fix for ASTERISK_25665.
	  The following fix (ASTERISK_27065) was incomplete, as QUEUESTATUS was
	  overwritten in case when "c" is set, regardless of what was the cause
	  for leaving the queue.

	  ASTERISK-27973 #close
	  Reported-by: Valentin Safonov

	  Change-Id: Iec013fe6a26a4e825ca572a1dda4f3cee5f6f80c

2018-08-09 15:25 +0000 [661273a078]  Corey Farrell <git@cfware.com>

	* Sample configs: Fix pjsip.conf syntax error.

	  It is valid for a config file to be empty or contain only comments, but
	  not valid for a config value to be set when no uncommented context
	  exists.  This caused an error to be loged numerous times during start
	  when loading the default pjsip.conf.

	  Change-Id: Icf3b0d69b4ecb6e935eecd43c99ed8b32a5a1cf6

2018-08-06 12:19 +0000 [eb87a98a1a]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.h: Fix doxygen comments.

	  Change-Id: I9cf97bdc756012d1f552ab007f4aa85e0ddb4e62

2018-08-06 06:36 +0000 [5030756bfa]  Joshua Colp <jcolp@digium.com>

	* stasis: Reduce calculation of stasis message type hash.

	  When the stasis cache is used a hash is calculated for
	  retrieving or inserting messages. This change calculates
	  a hash when the message type is initialized that is then
	  used each time needed. This ensures that the hash is
	  calculated only once for the message type.

	  Change-Id: I4fe6bfdafb55bf5c322dd313fbd8c32cce73ef37

2018-07-30 07:49 +0000 [04974a0ca2]  Alexander Traud <pabstraud@compuserve.com>

	* pjproject_bundled: Fix for Solaris builds. Do not undef s_addr.

	  The authors of PJProject undef s_addr because of some issue in Microsoft
	  Windows. However in Oracle Solaris, s_addr is not a structure member, but
	  defined to map to the real structure member.

	  Updates the patch from ASTERISK_20366

	  ASTERISK-27997

	  Change-Id: I8223026d4d54e2a46521085fcc94bfa6ebe35b11

2018-08-03 15:59 +0000 [99a0586ec1]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Make pjlib.h consistently included.

	  * Don't include pjlib.h twice in res_pjsip.h
	  * Consistently use #include <> form for pjproject includes.
	  (pjsip.h and pjlib.h)

	  Change-Id: I3f7b42044840de64edf7e9d7695cb60c45990dc7

2018-08-02 14:37 +0000 [523b7b2ffc]  Salah Ahmed <txrubel@gmail.com>

	* dialplan_functions: wrong srtp use status report of a dialplan function

	  If asterisk offer an endpoint with SRTP and that endpoint respond
	  with non srtp, in that case channel(rtp,secure,audio) reply wrong
	  status.

	  Why delete flag AST_SRTP_CRYPTO_OFFER_OK while check identical remote_key:
	  Currently this flag has being set redundantly. In either case identical
	  or different remote_key this flag has being set. So if we
	  don't set it while we receive identical remote_key or non SRTP SDP
	  response then we can take decision of srtp use by using that flag.

	  ASTERISK-27999

	  Change-Id: I29dc2843cf4e5ae2604301cb4ff258f1822dc2d7

2018-07-30 06:05 +0000 [e9d41572b3]  Alexander Traud <pabstraud@compuserve.com>

	* pjproject_bundled: Find shared libraries in root --with-ssl=PATH.

	  The script configure from Teluu expects shared libraries (.so) in a subfolder
	  called 'lib', when --with-xyz=PATH is specified. However for OpenSSL, the
	  default location is the root of the source folder = PATH. Furthermore, Asterisk
	  supports both, 'lib' and root. For consistency and because Asterisk is using
	  (only) OpenSSL in PJProject, it is enhanced to support both locations, just
	  like Asterisk.

	  ASTERISK-27995

	  Change-Id: I8eb916a88b6b8c22e29bb40bee8faaca6c73406f

2018-08-01 09:45 +0000 [1e837e13f5]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_registrar: Improve performance on inbound handling.

	  This change removes a sorcery lookup for retrieving all
	  contacts at the end of the registration process by keeping
	  track of the contacts that are added/updated/deleted.

	  This ensures at the end of the process the container of
	  contacts we have is the current state.

	  Pool usage has also been reduced by allocating one for
	  usage throughout the handling of a REGISTER and resetting
	  it to a clean state. This ensures that in most cases
	  we allocate once and just reuse it.

	  ASTERISK-28001

	  Change-Id: I1a78b2d46f9a2045dbbff1a3fd6dba84b612b3cb

2018-07-17 07:13 +0000 [e818925a58]  Torrey Searle <torrey@voxbone.com>

	* thirdparty/pjproject: fix deadlock in response retransmissions

	  The tdata containing the response can be shared by both the dialog
	  object and the tsx object.  In order to prevent the race condition
	  between the tsx retransmission and the dialog sending a response,
	  clone the tdata before modifying it for the dialog send response.

	  ASTERISK-27966 #close

	  Change-Id: Ic381004a3a212fe1d8eca0e707fe09dba4a6ab4e

2018-07-31 11:24 +0000 [20b53b5cee]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_wizard.conf.sample: Update remote_hosts description.

	  Remove the note that SRV records are not supported as that is no longer
	  true.

	  ASTERISK-27993

	  Change-Id: Id0dd6ef40e52702be9727a2b6122216cb00bb4ca

2018-07-27 13:23 +0000 [914b9e1934]  George Joseph <gjoseph@digium.com>

	* CI: Add optional uninstall step before installing asterisk

	  Change-Id: I7dedf1e925eafc3a0adf01dd9dfbe44eb642aab7

2018-07-28 11:49 +0000 [93d1c34efe]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable ncurses for menuselect in Solaris 11.

	  The check for the library ncurses should use not use the header <curses.h> but
	  <ncurses.h>, because on some platforms <curses.h> is not a drop-in replacement
	  for <ncurses.h>: For example in Solaris, the symbol initscr is a typedef in
	  <curses.h> to a symbol which does not exist in the library ncurses (initscr32).
	  Simply use <ncurses.h> when you link to ncurses.

	  Furthermore in Solaris, the header <ncurses.h> is in a subdirectory
	  /usr/include/ncurses and not available via pkg-config.

	  ASTERISK-15331
	  ASTERISK-14935
	  ASTERISK-12382
	  ASTERISK-9107

	  Change-Id: Ife367776b0ccf17d3fefed868245376bfb93745d

2018-07-28 08:00 +0000 [ee9794d741]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: Use ast_true for "prune_on_boot".

	  Change-Id: Iedec4e7390b3e821987681da24d0298632b9873d

2018-07-28 07:39 +0000 [c10b3ccd5f]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable Jansson in Solaris 11.

	  In Solaris, the header <jansson.h> is in /usr/include/jansson. To find
	  Jansson even in such a subdirectory, the tool pkg-config is queried via
	  AST_PKG_CONFIG_CHECK. For those platforms, which do not list Jansson via
	  pkg-config, the previous check remains and is executed thereafter.

	  Because the check for the NetBSD Editline library uses the tool pkg-config
	  the code of PKG_PROG_PKG_CONFIG must be used. Because that check happens
	  earlier than Jansson, it must be placed in front of that.

	  ASTERISK-27991

	  Change-Id: I69ea0f379f87a50049654b2487c76ee1c04fa53a

2018-07-24 13:44 +0000 [32ce8e5cf3]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_endpoint_identifier_ip.c: Added regex support to match_header

	  This patch adds regular expression support to make the identify section's
	  match_header option more useful when attempting to match complex headers
	  like the 'To' or 'From' headers.  The 'From' header has variable
	  components such as the tag parameter that you cannot predict.  To specify
	  a regular expression put slashes around the regular expression in place of
	  the header value.

	  [identify-alice]
	  type=identify
	  endpoint=alice
	  match_header=From: /<sip:alice@127\\.0\\.0\\.1>/

	  * Added regex support to match_header so you could match a 'To' header
	  among other complex headers.

	  Fixed reported crashes when trying to match special headers like 'Contact'.
	  The identify section's match_header method used code that assumed you were
	  matching a generic header.  Any other type of header could cause a crash
	  if the header structure variant did not match the generic header enough.

	  * Made use code that will work for any header type instead of code
	  specific to generic headers.

	  Other fixes while in the area:

	  * Made check all headers of the requested name.
	  * Added some more sanity checks to the configured identify matching
	  options when applying the configuration.

	  ASTERISK-27548

	  Change-Id: I27dfd4ff5e2259b906640e3c330681b76b4ed1f1

2018-07-27 10:46 +0000 [59f53514ce]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: Treat "prune_on_boot" as a yes / no.

	  The alembic for the PJSIP subscription persistence table has the
	  "prune_on_boot" field as a boolean. While in Asterisk we are
	  tolerant of many different definitions of true and false in the
	  database we only accept "yes" and "no". This change makes the
	  field treated as a yes/no instead of an integer, thus storing
	  "yes" and "no" instead of "1" and "0".

	  Change-Id: Ic8b9211b36babefe78f70def6828a135a6ae7ab6

2018-07-27 08:26 +0000 [8da81a208f]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: In Developer Mode, do not require OpenSSL.

	  OpenSSL is an optional external library and should stay optional even when
	  Developer Mode is configured.

	  ASTERISK-27990

	  Change-Id: Ia68a4cd5474b26d45e0f43b04032ad598022853b

2018-07-26 18:54 +0000 [e097dca4d7]  George Joseph <gjoseph@digium.com>

	* CI: Fix placement of job summary statments

	  Change-Id: Iace19e718f4e8fb48eb7dc9f98af53b115cc45f3

2018-07-26 12:52 +0000 [e5de8a70f8]  Corey Farrell <git@cfware.com>

	* loader: Process dependencies for built-in modules.

	  With the new module loader it was missed that built-in modules never
	  parsed dependencies from mod->info into vectors of mod.  This caused
	  manager to be initialized before acl (named_acl).  If manager.conf
	  used any named ACL's they would not be found and result in no ACL being
	  applied to the AMI user.

	  In addition to the manager ACL fix this adds "extconfig" to all builtin
	  modules which support realtime configuration.  This only matters if one
	  of the builtin modules is configured with 'preload', depending on
	  "extconfig" will cause config.c to automatically be initialize during
	  the preload stage.

	  Change-Id: I482ed6bca6c1064b05bb538d7861cd7a4f02d9fc

2018-07-18 09:32 +0000 [d3809d61cb]  Emmanuel BUU <emmanuel.buu@ives.fr>

	* res_rtp_asterisk: Avoid merging command and regular T.140 text packets

	  When realtime text packets are to be sent, the text is accumulated in a
	  buffer and sent regularly by a timer.  It can happen that commands such as
	  a backspace, CR, or LF get merged with regular text.  This breaks some
	  UAs.

	  The proposed change:
	  * We test if the current packet contains a command.  If so we send the
	  buffer immediately.
	  * We test if the buffer contained a command.  If so we send the buffer
	  immediately.
	  * We accumulate the text (or the command) in the buffer.

	  ASTERISK-27970

	  Change-Id: Ifbe993311410fa855cb8aa4a12084db75f413462

2018-07-26 11:34 +0000 [798f049e82]  George Joseph <gjoseph@digium.com>

	* CI:  Add docker info to job summary

	  Change-Id: I45d52005a9b692ad303c11792f226ace1e449901

2018-07-23 13:49 +0000 [7578881b3d]  Corey Farrell <git@cfware.com>

	* Build System: Create 'make install-configs' target.

	  This target requires specifying CONFIG_SRC=path_to_configs.  This can be
	  used to install custom configs for the Asterisk build while still
	  performing directory replacements on asterisk.conf.

	  Modify internal INSTALL_CONFIGS so first argument requires full path to
	  the config sources relative to Asterisk source root.

	  Change-Id: Idcd841df3c8d5bfe23d566bb9e2e448e9df4f8ab

2018-07-25 15:33 +0000 [8ea13d62cd]  Kevin Harwell <kharwell@digium.com>

	* json.c: improve ast_json_to_ast_variables performance

	  When converting from a json object to an ast variables list the conversion
	  algorithm was doing a complete traversal of the entire variables list for
	  every item appended from the json structure.

	  This patch makes it so the list is no longer traversed for each new ast
	  variable being appended.

	  Change-Id: I8bf496a1fc449485150d6db36bfc0354934a3977

2018-07-25 05:32 +0000 [e5c0ac6a64]  Joshua Colp <jcolp@digium.com>

	* devicestate: Don't create topic when change isn't cached.

	  When publishing a device state the change can be marked as being
	  cachable or not. If it is not cached the change is just published
	  to all interested and not stored away for later query. This was not
	  fully taken into account when publishing in stasis. The act of
	  publishing would create a topic for the device even if it may be
	  ephemeral.

	  This change makes it so messages which are not cached won't create
	  a topic for the device. If a topic does already exist it will be
	  published to but otherwise the change will only be published to
	  the device state all topic.

	  ASTERISK-27591

	  Change-Id: I18da0e8cbb18e79602e731020c46ba4101e59f0a

2018-07-25 10:20 +0000 [93997f9698]  George Joseph <gjoseph@digium.com>

	* CI: Explicitly pass BRANCH_NAME to buildAsterisk and installAsterisk

	  Change-Id: I652f4a0ea5107c778e27a78bccb67b18b0c4e087

2018-07-24 13:29 +0000 [0baf660bde]  George Joseph <gjoseph@digium.com>

	* CI: Add options to initialize and cleanup database to runTestsuite.sh

	  Change-Id: I352333233bab5377723bf37d490ba84fc55bc853

2018-07-25 09:07 +0000 [74cbeabb97]  Corey Farrell <git@cfware.com>

	* CI: Do not `mkdir 2`.

	  Change-Id: Ib7377d26a6c98b38bad463f47c84f1875ac84eb7

2018-07-25 07:34 +0000 [adf3c569a2]  Corey Farrell <git@cfware.com>

	* Build System: Silence build of bundled jansson.

	  Change-Id: I7392c79c0173057f5378010bf1fe65e300e8fc56

2018-07-25 07:13 +0000 [e4b0f09bcc]  George Joseph <gjoseph@digium.com>

	* CI: RefDebug: Fix reference to testsuite URL

	  Change-Id: I0ee41d95a87f0d97b01f2757012b846bcfe6443d

2018-07-24 14:28 +0000 [5537048d60]  Corey Farrell <git@cfware.com>

	* Build System: Fix bundled jansson install.

	  Update the bundled jansson Makefile to do nothing during Asterisk
	  install, use a target that is not phony to initiate the jansson make and
	  install.

	  Change-Id: I7643cc3d39af9feba8fc0da676b646efc5f8b3bb

2018-07-24 10:43 +0000 [9f3620a578]  Corey Farrell <git@cfware.com>

	* CI: Use bundled jansson if needed.

	  Use pkg-config to determine if jansson is at least 2.11, enabled bundled
	  version otherwise.

	  Change-Id: Ib555a8b72ff6f6925f9280ef035caa0b91ca4bd2

2018-07-24 04:57 +0000 [1f46e2e91c]  Florian Floimair <f.floimair@commend.com>

	* res_pjsip: Change log message from error to warning for valid use cases

	  If a SIP MESSAGE is triggered for an endpoint that is currently not registered
	  - and therefore has no valid contact associated - an error message was logged.
	  Since this is a valid request in a valid use cases this is now changed to a
	  warning, as discussed with Matt Fredrickson on the asterisk-dev mailing list.

	  Change-Id: I55eb62d2712818a58c7532119dec288bd98cf0c0

2018-07-24 05:39 +0000 [8550fad21a]  George Joseph <gjoseph@digium.com>

	* CI:  Add --privileged flag to docker options

	  Change-Id: If92d55f15306e55dd7091ac3c47b13ebbbb03488

2018-07-24 05:22 +0000 [f2580d037f]  George Joseph <gjoseph@digium.com>

	* CI: Set correct user:group when publishing docs

	  Change-Id: Ibabeb9ac730d9755cf54318d0da74771c939b86b

2018-07-23 12:21 +0000 [35d06e46ae]  Richard Mudgett <rmudgett@digium.com>

	* core: AST_DEVMODE no longer affects ABI.

	  Remove AST_DEVMODE from the AST_BUILDOPTS list and the AST_BUILDOPTS_SUM
	  calculation as it no longer affects API/ABI compatibility.

	  Change-Id: Id5bd6dfade173a53b3a49f715586b86e3fb24acb

2018-07-23 10:23 +0000 [09b258fd69]  Corey Farrell <git@cfware.com>

	* CI: Split --test-command argument.

	  The --test-command argument has now been split, unit tests now use
	  `--unittest-command` and the testsuite uses --testsuite-command.

	  This will make it easier to create a script which run everything by
	  forwarding the same arguments to all CI scripts.

	  Change-Id: Ia54aa4848eaffbdf13175fcda40fc0b23080ad71

2018-07-20 06:20 +0000 [460ef41f7a]  George Joseph <gjoseph@digium.com>

	* xmldoc.c:  Fix dump of xml document

	  The "xmldoc dump" cli command was simply concatenating xml documents
	  into the output file.  The resulting file had multiple "xml"
	  processing instructions and multiple root elements which is illegal.
	  Normally this isn't an issue because Asterisk has only 1 main xml
	  documentation file but codec_opus has its own file so if it's
	  downloaded and you do "xmldoc dump", the result is invalid.

	  * Added 2 new functions to xml.c:
	      ast_xml_copy_node_list creates a copy of a list of children.
	      ast_xml_add_child_list adds a list to an existing list.

	  * Modified handle_dump_docs to create a new output document and
	    add to it the children from each input file.  It then dumps the
	    new document to the output file.

	  Change-Id: I3f182d38c75776aee76413dadd2d489d54a85c07

2018-07-21 11:58 +0000 [fd1f74af40]  Corey Farrell <git@cfware.com>

	* CI: Fix mkdir CACHE_DIR.

	  Change-Id: Ic9f9a61e230047836c836206731f8ff7eb3538c9

2018-07-21 11:22 +0000 [9b3267641f]  Corey Farrell <git@cfware.com>

	* build_tools/make_version: Get MAINLINE_BRANCH from .gitreview.

	  Use .gitreview defaultbranch setting to determine the mainline branch.
	  This allows the script to be used against other directories which might
	  not be on the same defaultbranch.  This can be used by CI scripts to
	  report the testsuite version being used:
	  ./build_tools/make_version ${TESTSUITE_DIR}

	  Change-Id: Ifdad4a9d8a26138c41bc6b630ecc3e34ea1c2758

2018-07-22 10:41 +0000 [0f999a834f]  Joshua Colp <jcolp@digium.com>

	* sched: Make ABI compatible between dev mode and non-dev mode.

	  In the past there was an assertion in the ast_sched_del function
	  and in order to ensure it was useful the calling function name,
	  line number, and filename had to be passed in. This cause the ABI
	  to be different between dev mode and non-dev mode.

	  This assertion is no longer present so the special logic can be
	  removed to make it the same between them both.

	  Change-Id: Icbc69c801e357d7004efc5cf2ab936d9b83b6ab8

2018-07-20 15:52 +0000 [aea0a0294d]  Richard Mudgett <rmudgett@digium.com>

	* asterisk.c: Update displayed copyright year for v16 release.

	  Change-Id: I60622731d928ee9506b1d28934095f0dc3e5306e

2018-07-16 15:08 +0000 [d2dace81d4]  Corey Farrell <git@cfware.com>

	* Enable bundling of jansson, require 2.11.

	  Change-Id: Ib3111b151d37cbda40768cf2a8a9c6cf6c5c7cbd

2018-07-20 09:25 +0000 [c8bd8f6ce9]  Corey Farrell <git@cfware.com>

	* CI: Fix logger.conf for unit tests.

	  Change-Id: Idea59d60eab20105de50b34f0f0d506e6ef55d5c

2018-07-19 10:34 +0000 [0f82db82cb]  George Joseph <gjoseph@digium.com>

	* CI:  Add wiki doc publish to periodics

	  Change-Id: I29ba26134e5083bc6788ede235f1a5d4383c148a

2018-07-20 06:54 +0000 [a2a3ad2438]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Update default keepalive interval to 90 seconds.

	  A change recently went in which disabled the built-in PJSIP
	  keepalive. This defaulted to 90 seconds and kept TCP/TLS
	  connections alive. Disabling this functionality has resulted
	  in a behavior change of not doing keepalives by default resulting
	  in TCP/TLS connections dropping for some people.

	  This change makes our default keepalive interval 90 seconds
	  to match the previous behavior and preserve it.

	  ASTERISK-27978

	  Change-Id: Ibd9a45f3cbe5d9bb6d2161268696645ff781b1d6

2018-07-19 16:17 +0000 [dbffcdc561]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Update endpoint transport option documentation.

	  Change-Id: I5394fdff6a296efc8e1695a156e616acd932ae52

2018-07-19 13:27 +0000 [709b795cb0]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_resolver.c: Use replacement function

	  * Use the replacement function ast_sip_push_task_wait_servant() instead of
	  the deprecated ast_sip_push_task_synchronous().

	  Change-Id: I145b550ba7054640c7faa3b644e63137f505c612

2018-07-18 17:13 +0000 [c40412bd13]  Corey Farrell <git@cfware.com>

	* contrib: Update systemd README.txt.

	  Mention need to compile Asterisk with systemd development package
	  installed.

	  ASTERISK-27968

	  Change-Id: Ib3a973be403c61cbe09572b0f912fb1aa1bff026

2018-07-18 14:19 +0000 [0b3bc4852f]  Joshua Colp <jcolp@digium.com>

	* Update mainline version for the 16 branch.

	  Change-Id: I4d36277d10335349d83ae218fa10fee99c3e4c14

2018-08-08 16:02 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 16.0.0-rc1 Released.

2018-07-27 13:23 +0000 [d3789cc420]  George Joseph <gjoseph@digium.com>

	* CI: Add optional uninstall step before installing asterisk

	  Change-Id: I7dedf1e925eafc3a0adf01dd9dfbe44eb642aab7

2018-07-28 08:00 +0000 [89b669a227]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: Use ast_true for "prune_on_boot".

	  Change-Id: Iedec4e7390b3e821987681da24d0298632b9873d

2018-07-27 10:46 +0000 [0028db48cc]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: Treat "prune_on_boot" as a yes / no.

	  The alembic for the PJSIP subscription persistence table has the
	  "prune_on_boot" field as a boolean. While in Asterisk we are
	  tolerant of many different definitions of true and false in the
	  database we only accept "yes" and "no". This change makes the
	  field treated as a yes/no instead of an integer, thus storing
	  "yes" and "no" instead of "1" and "0".

	  Change-Id: Ic8b9211b36babefe78f70def6828a135a6ae7ab6

2018-07-26 18:54 +0000 [24e4e45177]  George Joseph <gjoseph@digium.com>

	* CI: Fix placement of job summary statments

	  Change-Id: Iace19e718f4e8fb48eb7dc9f98af53b115cc45f3

2018-07-26 12:52 +0000 [c384a4cdcd]  Corey Farrell <git@cfware.com>

	* loader: Process dependencies for built-in modules.

	  With the new module loader it was missed that built-in modules never
	  parsed dependencies from mod->info into vectors of mod.  This caused
	  manager to be initialized before acl (named_acl).  If manager.conf
	  used any named ACL's they would not be found and result in no ACL being
	  applied to the AMI user.

	  In addition to the manager ACL fix this adds "extconfig" to all builtin
	  modules which support realtime configuration.  This only matters if one
	  of the builtin modules is configured with 'preload', depending on
	  "extconfig" will cause config.c to automatically be initialize during
	  the preload stage.

	  Change-Id: I482ed6bca6c1064b05bb538d7861cd7a4f02d9fc

2018-07-26 11:34 +0000 [9f1041c4d0]  George Joseph <gjoseph@digium.com>

	* CI:  Add docker info to job summary

	  Change-Id: I45d52005a9b692ad303c11792f226ace1e449901

2018-07-25 15:33 +0000 [c5761ee58e]  Kevin Harwell <kharwell@digium.com>

	* json.c: improve ast_json_to_ast_variables performance

	  When converting from a json object to an ast variables list the conversion
	  algorithm was doing a complete traversal of the entire variables list for
	  every item appended from the json structure.

	  This patch makes it so the list is no longer traversed for each new ast
	  variable being appended.

	  Change-Id: I8bf496a1fc449485150d6db36bfc0354934a3977

2018-07-25 10:20 +0000 [cfd61ba237]  George Joseph <gjoseph@digium.com>

	* CI: Explicitly pass BRANCH_NAME to buildAsterisk and installAsterisk

	  Change-Id: I652f4a0ea5107c778e27a78bccb67b18b0c4e087

2018-07-24 13:29 +0000 [a81870110a]  George Joseph <gjoseph@digium.com>

	* CI: Add options to initialize and cleanup database to runTestsuite.sh

	  Change-Id: I352333233bab5377723bf37d490ba84fc55bc853

2018-07-25 09:07 +0000 [4a01be5c80]  Corey Farrell <git@cfware.com>

	* CI: Do not `mkdir 2`.

	  Change-Id: Ib7377d26a6c98b38bad463f47c84f1875ac84eb7

2018-07-25 07:34 +0000 [e6f2bae0cc]  Corey Farrell <git@cfware.com>

	* Build System: Silence build of bundled jansson.

	  Change-Id: I7392c79c0173057f5378010bf1fe65e300e8fc56

2018-07-25 07:13 +0000 [f1156f0cfd]  George Joseph <gjoseph@digium.com>

	* CI: RefDebug: Fix reference to testsuite URL

	  Change-Id: I0ee41d95a87f0d97b01f2757012b846bcfe6443d

2018-07-24 14:28 +0000 [7e99090c9d]  Corey Farrell <git@cfware.com>

	* Build System: Fix bundled jansson install.

	  Update the bundled jansson Makefile to do nothing during Asterisk
	  install, use a target that is not phony to initiate the jansson make and
	  install.

	  Change-Id: I7643cc3d39af9feba8fc0da676b646efc5f8b3bb

2018-07-24 10:43 +0000 [b32adca9b4]  Corey Farrell <git@cfware.com>

	* CI: Use bundled jansson if needed.

	  Use pkg-config to determine if jansson is at least 2.11, enabled bundled
	  version otherwise.

	  Change-Id: Ib555a8b72ff6f6925f9280ef035caa0b91ca4bd2

2018-07-24 05:39 +0000 [e22cbe7c17]  George Joseph <gjoseph@digium.com>

	* CI:  Add --privileged flag to docker options

	  Change-Id: If92d55f15306e55dd7091ac3c47b13ebbbb03488

2018-07-24 05:22 +0000 [3509ada06f]  George Joseph <gjoseph@digium.com>

	* CI: Set correct user:group when publishing docs

	  Change-Id: Ibabeb9ac730d9755cf54318d0da74771c939b86b

2018-07-23 12:21 +0000 [008d304be2]  Richard Mudgett <rmudgett@digium.com>

	* core: AST_DEVMODE no longer affects ABI.

	  Remove AST_DEVMODE from the AST_BUILDOPTS list and the AST_BUILDOPTS_SUM
	  calculation as it no longer affects API/ABI compatibility.

	  Change-Id: Id5bd6dfade173a53b3a49f715586b86e3fb24acb

2018-07-23 10:23 +0000 [5dbbc68311]  Corey Farrell <git@cfware.com>

	* CI: Split --test-command argument.

	  The --test-command argument has now been split, unit tests now use
	  `--unittest-command` and the testsuite uses --testsuite-command.

	  This will make it easier to create a script which run everything by
	  forwarding the same arguments to all CI scripts.

	  Change-Id: Ia54aa4848eaffbdf13175fcda40fc0b23080ad71

2018-07-21 11:58 +0000 [2a13a4344e]  Corey Farrell <git@cfware.com>

	* CI: Fix mkdir CACHE_DIR.

	  Change-Id: Ic9f9a61e230047836c836206731f8ff7eb3538c9

2018-07-22 10:41 +0000 [9742fb07c9]  Joshua Colp <jcolp@digium.com>

	* sched: Make ABI compatible between dev mode and non-dev mode.

	  In the past there was an assertion in the ast_sched_del function
	  and in order to ensure it was useful the calling function name,
	  line number, and filename had to be passed in. This cause the ABI
	  to be different between dev mode and non-dev mode.

	  This assertion is no longer present so the special logic can be
	  removed to make it the same between them both.

	  Change-Id: Icbc69c801e357d7004efc5cf2ab936d9b83b6ab8

2018-07-20 15:52 +0000 [2c51079d05]  Richard Mudgett <rmudgett@digium.com>

	* asterisk.c: Update displayed copyright year for v16 release.

	  Change-Id: I60622731d928ee9506b1d28934095f0dc3e5306e

2018-07-16 15:08 +0000 [3cdffa1342]  Corey Farrell <git@cfware.com>

	* Enable bundling of jansson, require 2.11.

	  Change-Id: Ib3111b151d37cbda40768cf2a8a9c6cf6c5c7cbd

2018-07-20 09:25 +0000 [136d855f69]  Corey Farrell <git@cfware.com>

	* CI: Fix logger.conf for unit tests.

	  Change-Id: Idea59d60eab20105de50b34f0f0d506e6ef55d5c

2018-07-19 10:34 +0000 [0c1513d8a0]  George Joseph <gjoseph@digium.com>

	* CI:  Add wiki doc publish to periodics

	  Change-Id: I29ba26134e5083bc6788ede235f1a5d4383c148a

2018-07-20 06:20 +0000 [61a974ed4e]  George Joseph <gjoseph@digium.com>

	* xmldoc.c:  Fix dump of xml document

	  The "xmldoc dump" cli command was simply concatenating xml documents
	  into the output file.  The resulting file had multiple "xml"
	  processing instructions and multiple root elements which is illegal.
	  Normally this isn't an issue because Asterisk has only 1 main xml
	  documentation file but codec_opus has its own file so if it's
	  downloaded and you do "xmldoc dump", the result is invalid.

	  * Added 2 new functions to xml.c:
	      ast_xml_copy_node_list creates a copy of a list of children.
	      ast_xml_add_child_list adds a list to an existing list.

	  * Modified handle_dump_docs to create a new output document and
	    add to it the children from each input file.  It then dumps the
	    new document to the output file.

	  Change-Id: I3f182d38c75776aee76413dadd2d489d54a85c07

2018-07-20 06:54 +0000 [50a26b15a3]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Update default keepalive interval to 90 seconds.

	  A change recently went in which disabled the built-in PJSIP
	  keepalive. This defaulted to 90 seconds and kept TCP/TLS
	  connections alive. Disabling this functionality has resulted
	  in a behavior change of not doing keepalives by default resulting
	  in TCP/TLS connections dropping for some people.

	  This change makes our default keepalive interval 90 seconds
	  to match the previous behavior and preserve it.

	  ASTERISK-27978

	  Change-Id: Ibd9a45f3cbe5d9bb6d2161268696645ff781b1d6

2018-07-18 14:19 +0000 [958f76205b]  Joshua Colp <jcolp@digium.com>

	* Update mainline version for the 16 branch.

	  Change-Id: I4d36277d10335349d83ae218fa10fee99c3e4c14

2018-07-18 14:18 +0000 [e7a76ffee1]  Joshua Colp <jcolp@digium.com>

	* Update ARI version for master/16.

	  ARI goes from 3.0.0 to 4.0.0

	  Change-Id: I0649fa34926dc4fc89a166f1d2e3bbd965ef9ebe

2018-05-29 09:31 +0000 [fe78d374b0]  Alexander Traud <pabstraud@compuserve.com>

	* pjproject_bundled: Repair ./configure --with-ssl=PATH.

	  Previously, Asterisk did not tell its bundled PJProject about this configure
	  parameter. Therefore, PJProject used the platform provided OpenSSL always.

	  ASTERISK-27880

	  Change-Id: Iea545aec854dd0e2c061c69bb118a76ce56c5dc6

2018-05-10 13:11 +0000 [5bacde37a2]  Ben Ford <bford@digium.com>

	* res_rtp_asterisk: Add support for sending NACK requests.

	  Support has been added for receiving a NACK request and handling it.
	  Now, Asterisk can detect when a NACK request should be sent and knows
	  how to construct one based on the packets we've received from the remote
	  end. A buffer has been added that will store out of order packets until
	  we receive the packet we are expecting. Then, these packets are handled
	  like normal and frames are queued to the core like normal. Asterisk
	  knows which packets to request in the NACK request using a vector
	  which stores the sequence numbers of the packets we are currently missing.

	  If a missing packet is received, cycle through the buffer until we reach
	  another packet we have not received yet. If the buffer reaches a certain
	  size, send a NACK request. If the buffer reaches its max size, queue all
	  frames to the core and wipe the buffer and vector.

	  According to RFC3711, the NACK request must be sent out in a compound
	  packet. All compound packets must start with a sender or receiver
	  report, so some work was done to refactor the current sender / receiver
	  code to allow it to be used without having to also include sdes
	  information and automatically send the report.

	  Also added additional functionality to ast_data_buffer, along with some
	  testing.

	  For more information, refer to the wiki page:
	  https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements

	  ASTERISK-27810 #close

	  Change-Id: Idab644b08a1593659c92cda64132ccc203fe991d

2018-07-18 11:12 +0000 [59323121f3]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_config: Allow configuration section to be used based on name.

	  A problem I've seen countless times is a global or system section
	  for PJSIP not getting applied. This is inevitably the result of
	  the "type=" line missing. This change alleviates that problem.

	  The ability to specify an explicit section name has been
	  added to res_sorcery_config. If the configured section
	  name matches this and there are no unknown things configured
	  the section is taken as being for the given type.

	  Both the PJSIP "global" and "system" types now support this
	  so you can just name your section "global" or "system" and it
	  will be matched and used, even without a "type=" line.

	  ASTERISK-27972

	  Change-Id: Ie22723663c1ddd24f869af8c9b4c1b59e2476893

2018-07-17 05:24 +0000 [134e2f0ddc]  Joshua Colp <jcolp@digium.com>

	* module: Remove deprecated modules and update support levels.

	  I have removed the STATIC_BUILD option immediately as it has not
	  been maintained in many years and is non-functional.

	  ASTERISK-27965

	  Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7

2018-07-18 11:34 +0000 [94dd0544e5]  Chris-Savinovich <csavinovich@digium.com>

	* stasis: Improve message type "Use of before/init after destruction"

	  Fixes issue where error msg
	  "Use of before/init after destruction"
	  was being printed on disabled messages
	  in dev mode.  With this
	  fix if message is disabled
	  a warning will print.

	  ASTERISK-25548
	  Change-Id: Ie0d866d1cbc60c16dbef08bc65e99505c3c1adfa

2018-07-17 14:12 +0000 [993ba84cd3]  Nick French <naf@ou.edu>

	* SRTP: Lower SDES key lifetime minimum to 2^20

	  SRTP SDES key lifetime support was added in ASTERISK_17899.

	  In that addition, the minimum key lifetime to be accepted was
	  set at the 10 hours @ 20ms/packet = 1800000 packets.

	  The firmware in the obi1xx ATA uses a hardcoded lifetime of
	  2^20 packets.

	  Lower the limit to 2^20 to support a wider field of clients.

	  ASTERISK-27967 #close

	  Change-Id: I81a0703c595a0c9101dfdf02300149a3cc39bf94

2018-07-17 11:09 +0000 [fcc0a6fe8a]  George Joseph <gjoseph@digium.com>

	* CI: Fix merge strategy

	  Change-Id: I5e3fb6adfa6cbf694c0deecf02e3879297b0c12e

2018-07-17 10:41 +0000 [3e5a6a6cfc]  George Joseph <gjoseph@digium.com>

	* CI: Fix regex in daily and ref_debug jobs

	  Change-Id: Icf2e67818b2155a158d2390b138613e1f653ea92

2018-07-17 09:09 +0000 [0e8976116f]  Nick French <naf@ou.edu>

	* res_pjsip:  Remove spurious error logging when printing silent headers

	  Asterisk patched the pjproject source to avoid crashing when pjproject
	  sip_msg headers are encountered with NULL vptr's, but the patch also
	  output error messages for some valid headers which simply did not need
	  to be added to the message itself, such as hidden route headers.

	  pjproject has since applied a similar patch to their baseline to avoid
	  crashes, but their version also avoids the spurious error logging.

	  Lets use their patch instead.

	  ASTERISK-27961 #close

	  Change-Id: I2ddbd82c8da10e0dcc9807a48089d1f3c2d6e389

2018-07-17 10:15 +0000 [fa333dedd0]  George Joseph <gjoseph@digium.com>

	* CI: Add pre-build merge back in as RECURSIVE

	  Change-Id: I0ff1730ef4a4f0ac9f18ccc9bc0dfe7a782f57a8

2018-07-17 09:01 +0000 [2553255ace]  George Joseph <gjoseph@digium.com>

	* CI: Remove pre-build merge from gates and checks

	  Change-Id: Ibc151f63dcec4db847915c2f3cbe5b467dd59574

2018-07-17 07:13 +0000 [524f900382]  George Joseph <gjoseph@digium.com>

	* CI: Fix logic inversion in runTestsuite

	  Change-Id: I56399aa384468f45494c2c3650420563a0b6efe1

2018-07-17 04:03 +0000 [0af4a558da]  George Joseph <gjoseph@digium.com>

	* CI: Add teardownRealtime

	  Change-Id: I2fe55c38607eaec2fbf69ef23a5019e0c443a64b

2018-07-15 13:58 +0000 [49f83a7490]  Corey Farrell <git@cfware.com>

	* loader: Fix startup issues.

	  * Merge the preload and load stages, use load ordering to try preload's
	    first.  This fixes an issue where `preload=res_config_curl` would fail
	    unless res_curl and func_curl were also preloaded.  Now it is only
	    required that those modules be loaded during startup: autoload or
	    regular load is good enough.
	  * The configuration option `require` and `preload-require` were only
	    effective if the modules failed to load.  These options will now abort
	    Asterisk startup if required modules fail to reach the 'Running'
	    state.
	  * Missing or invalid 'module.conf' did not prevent startup.  Asterisk
	    doesn't do anything without modules so this a fatal error.

	  Change-Id: Ie4176699133f0e3a823b43f90c3348677e43a5f3

2018-07-16 13:30 +0000 [a9cef123d9]  George Joseph <gjoseph@digium.com>

	* CI:  Prevent Jenkins from triggering jobs back to itself

	  Change-Id: I9cae8bb3d1a2cea335d3ccd88d471832549666fd

2018-07-13 18:26 +0000 [5febc995df]  Richard Mudgett <rmudgett@digium.com>

	* Build: Fix modules getting their optimization setting overridden.

	  Asterisk modules that use PJPROJECT services have their compiler
	  optimization and possibly their symbolic debug options overridden by the
	  PJPROJECT configure script selected settings.

	  * We need to filter-out any -O and -g options in PJ_CFLAGS before echoing
	  out the result so the PJPROJECT_INCLUDE variable does not override the
	  Asterisk module settings when using bundled PJPROJECT.

	  NOTE: This patch only has an effect when using bundled PJPROJECT.

	  ASTERISK-27563

	  Change-Id: If124169735ecf572ad1535cd43bff94cb44d5b30

2018-07-16 11:08 +0000 [d15ef68892]  George Joseph <gjoseph@digium.com>

	* CI: runUnittests: loop a few times on waitfullybooted

	  Change-Id: Icebc0d013896f3b2a7214945cac60647435c1651

2018-07-16 10:49 +0000 [252c4284df]  George Joseph <gjoseph@digium.com>

	* CI:  Add realtime checks to dailies

	  Change-Id: I6dc8ab1679b3505c6dde1d47e1b9276df47814f8

2018-07-16 09:13 +0000 [1a52ab70c7]  George Joseph <gjoseph@digium.com>

	* CI:  Add weekly REF_DEBUG testsuite run

	  Change-Id: I5b581d0a0d1d1bb9b38961d40b112fb448355037

2018-07-16 08:44 +0000 [9633e9dfd7]  George Joseph <gjoseph@digium.com>

	* CI: Fix bad reporting of status by the verification pub

	  Change-Id: I6f31a130b3ba0187149aaaa2ce94195a79e0f6a6

2018-07-16 07:16 +0000 [b8d75bbb37]  George Joseph <gjoseph@digium.com>

	* CI: Make build tag an acceptable docker name

	  Change-Id: I3a4b8a4a9c488ddabf9daf651dc1334222056f38

2018-07-13 22:44 +0000 [0885ab8afc]  Corey Farrell <git@cfware.com>

	* Fix declaration of PBX_CURL for ./configure --without-libcurl

	  When `--without-libcurl` is used PBX_CURL is never set.  Set default
	  value 0 so the proper value is passed to menuselect.

	  Change-Id: I03e2842a00899cbca2dbde52bb1f6636d54bae1e

2018-07-10 13:28 +0000 [34f3fe9552]  George Joseph <gjoseph@digium.com>

	* app_confbridge:  Use the SDP 'label' attribute to correlate users

	  Previously, the msid "label" attribute was used to correlate
	  participant info but because streams could be reused, the msid
	  wasn't being updated correctly when someone left the bridge and
	  another joined.

	  Now, instead of looking for the msid attribute on a channel's streams,
	  app_confbridge sets an "SDP:LABEL" attribute on the stream which
	  res_pjsip_sdp_rtp looks for.  If it finds it, it adds a "label"
	  attribute to the current sdp.

	  Change-Id: I6cbaa87fb59a2e0688d956e72d2d09e4ac20d5a5

2018-07-13 06:56 +0000 [e8727fcfa8]  George Joseph <gjoseph@digium.com>

	* CI: Add daily periodics to CI

	  Change-Id: I26933e73928e091ae72e838c02f4f2ec7c3983d6

2018-07-11 11:57 +0000 [e19080a184]  Alexander Traud (License 6520)

	* Bundled PJPROJECT: Disable internal connection oriented keep-alive.

	  Turn off the periodic sending of CRLNCRLN.  Default is on (90 seconds),
	  which conflicts with the global section's keep_alive_interval option in
	  pjsip.conf.

	  patches:
	    pjsip_keep_not_alive.patch submitted by Alexander Traud (License 6520)

	  ASTERISK-27347

	  Change-Id: I6a197f56e1830d3b7e5ec70f17025840a290b057

2018-07-09 04:42 +0000 [1445384699]  Torrey Searle <torrey@voxbone.com>

	* res_pjsip_sdp_rtp: include ice in ANSWER only if offered

	  Keep track if ICE candidates were in the SDP offer & only put them
	  in the corresponding SDP answer if the offer condaind ICE candidates

	  ASTERISK-27957 #close

	  Change-Id: Idf2597ee48e9a287e07aa4030bfa705430a13a92

2018-07-12 16:34 +0000 [33a84745d0]  George Joseph <gjoseph@digium.com>

	* CI: Add Asterisk Gates

	  Change-Id: I7e2467f9120812551238d8005deb97f965279205

2018-07-11 15:55 +0000 [65b002ab8f]  George Joseph <gjoseph@digium.com>

	* CI: Remove duplicate checkout

	  Change-Id: If5f925b4c4ed7000b153f3ed8386ce2140c886f8

2018-07-11 15:09 +0000 [ba8f8a2813]  George Joseph <gjoseph@digium.com>

	* CI: Update cleanup steps and permissions

	  Change-Id: I7ca92935979d94845af8e1caf4468cbd6209b7de

2018-07-11 14:54 +0000 [ad36c4ba9b]  George Joseph <gjoseph@digium.com>

	* CI: Fix log artifact paths

	  Change-Id: I55136de8f4d9c3b56bd4d054306a187bb04a4b7d

2018-07-11 14:45 +0000 [4842af6364]  George Joseph <gjoseph@digium.com>

	* CI: Remove CleanBeforeCheckout option for testsuite

	  Change-Id: I510231c9087f7be5272b8ef3f3223eadaaffb754

2018-07-11 14:00 +0000 [3dfc37c60a]  George Joseph <gjoseph@digium.com>

	* CI: Move gates into source repo

	  Change-Id: If028ede5f3b127fa274c63ce166bc04ad7c1e5db

2018-07-11 06:14 +0000 [b302ee6bd5]  George Joseph <gjoseph@digium.com>

	* CI:  Initial commit for moving CI into source repo

	  Create tests/CI directory and add files used by Jenkins to
	  build and test Asterisk.

	  With this commit, Jenkins will run the Asterisk Unit Tests using
	  the Jenkinsfile at tests/CI/unittests.jenkinsfile.  Bash scripts
	  to do the actual building and testing are also in the same directory.
	  Output is placed in tests/CI/output so that directory has been
	  added to .gitignore.

	  Change-Id: I9448065465e6de2b878634510ace8fd1ef378608

2018-07-06 17:00 +0000 [f7137e1230]  Joshua Elson <joshelson@gmail.com>

	* res_parking: Add dialplan function for lot channel

	  This commit adds a new function to res_parking.

	  This function, PARK_GET_CHANNEL allows the retrieval
	  of the channel name of the channel occupying the parking slot.

	  ASTERISK-22825 #close

	  Change-Id: Idba6ae55b8a53f734238cb3d995cedb95c0e7b74

2018-06-23 01:33 +0000 [10de9fcbf1]  Alexander Traud <pabstraud@compuserve.com>

	* chan_ooh323: IPTOS_MINCOST is not defined on Solaris.

	  Furthermore, <sys/sockio.h> is required for SIOCGIF*.

	  ASTERISK-27938

	  Change-Id: Idc9153ece769944765b66122efb11728d8d8ebde

2018-07-06 15:05 +0000 [5bb874ee09]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_session: sdp group:BUNDLE attribute being truncated

	  When setting/appending the media id's to the bundle group attribute a '-1' was
	  being passed to the 'ast_str_set/append' function for the 'max_len' parameter.
	  This essentially capped the length of the string to what it was originally
	  allocated with. In this case 64 bytes.

	  This patch makes it so a '0' is passed as in for the 'max_len', which means
	  "no maximum length".

	  ASTERISK-27955 #close

	  Change-Id: Iec565df6600401d54a502854a53d19bb4cc34876

2018-07-05 16:02 +0000 [96abe79ddf]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_pubsub: segfault in function publish_expire

	  The function pubsub_on_rx_publish_request incorrectly uses
	  of AST_SCHED_REPLACE_UNREF.

	  The AST_SCHED_REPLACE_UNREF should unref old '_data'.

	  Because of this, there may be a double unref
	  of variable 'publication' when ast_sched_del is unsuccessful
	  that leads to use after free of the 'publication' in publish_expire.

	  ASTERISK-27956 #close

	  Change-Id: Ie0f0cfc7e036953d890b188656010b325a5cdc82

2018-07-06 09:04 +0000 [c1e49720fa]  George Joseph <gjoseph@digium.com>

	* test.c:  Make output jUnit compatible

	  Separate "name" into "classname" and "name".
	  Use '.' for classname separator instead of '/'.
	  Prefix reserved words with '_'.
	  Wrap output with a top-level "testsuites" element.

	  Change-Id: Iec1a985eba1c478e5c1d65d5dfd95cb708442099

2018-07-06 07:57 +0000 [8f42447c68]  George Joseph <gjoseph@digium.com>

	* res_pjsip:  Add 'suppress_q850_reason_headers' option to endpoint

	  A new option 'suppress_q850_reason_headers' has been added to the
	  endpoint object. Some devices can't accept multiple Reason headers and
	  get confused when both 'SIP' and 'Q.850' Reason headers are received.
	  This option allows the 'Q.850' Reason header to be suppressed.
	  The default value is 'no'.

	  ASTERISK-27949
	  Reported-by: Ross Beer

	  Change-Id: I54cf37a827d77de2079256bb3de7e90fa5e1deb1

2018-07-05 15:43 +0000 [c9f8e068ed]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_t38: Decline T.38 stream on failure case.

	  When negotiating an incoming T.38 stream the code incorrectly
	  returned failure instead of a decline for the stream when a
	  problem occurred or the configuration didn't allow it. This
	  resulted in SDP offers being rejected with a 488 response
	  in all cases, even when another valid stream was present.

	  This change makes it so the stream is now declined. If no
	  streams are accepted a 488 response is sent while if at least
	  one stream is accepted all the declined streams are, well,
	  declined.

	  ASTERISK-27763

	  Change-Id: I88bcf793788c412a9839d111a5c736bf6867807c

2018-07-02 18:43 +0000 [d5db664d70]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_t38.c: Be smarter about how we respond when T.38 is disabled.

	  We were blindly responding with AST_T38_REFUSED when ANY T.38 control
	  frame came accross the bridge.  This causes T.38 Gateway to get confused
	  and the T.38 session to get in a strange state.

	  * Made the T.38 framehook only respond to request frames and ignore
	  response frames.

	  ASTERISK-27657
	  ASTERISK-27080

	  Change-Id: I5fb5967c7d1efb30a7ff375f82887ca82a55b05b

2018-07-03 12:10 +0000 [0aff1a278e]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip/pjsip_transport_management.c: Fix deadlock with transport keep alive.

	  Using the keep_alive_interval option can result in a deadlock between the
	  pjproject transport manager group lock and the monitored transports ao2
	  container lock.  The pjproject transport manager group lock has to be
	  superior in the locking order to the monitored transports ao2 container
	  lock because of pjproject callbacks called when already holding the group
	  lock.  The lock inversion happens when Asterisk attempts to send a keep
	  alive packet over the reliable transports.

	  * Made keepalive_transport_thread() iterate over the monitored transports
	  container rather than use the ao2_callback() method.  This avoids holding
	  the container lock when sending the keep alive packet.

	  ASTERISK-26686

	  Change-Id: I5d5392a52e698bbe41a93f7d8e92bf0e61fe3951

2018-07-02 18:44 +0000 [de5144e751]  Joshua Colp <jcolp@digium.com>

	* pjsip: Clarify certificate configuration for Websocket.

	  The Websocket transport uses the built-in HTTP server. As a result
	  the TLS configuration is done in http.conf and not in pjsip.conf.

	  This change adds a warning if this is configured in pjsip.conf and
	  also clarifies in the sample configuration file.

	  Change-Id: I187d994d328c3ed274b6754fd4c2a4955bdc6dd9

2018-06-23 04:50 +0000 [804d931f27]  Alexander Traud <pabstraud@compuserve.com>

	* bridge_softmix_binaural: Enable FFTW3 in Solaris 11.

	  ASTERISK-27939

	  Change-Id: Ice5640e08385a64a0a6555deaccd91e86bca154f

2018-06-29 18:28 +0000 [1aa45ffdfa]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_t38.c: Fix crash by ignoring 1xx messages.

	  If we initiated a T.38 reINVITE, we would crash if we received any other
	  1xx response message except 100 if it were followed by a 200 response.

	  * Made ignore any 1xx response so we do not close out the T.38 negotiation
	  too early.  For good measure we'll now accept any 2xx response as
	  acceptance of the reINVITE T.38 offer.

	  ASTERISK-27944

	  Change-Id: I0ca88aae708d091db7335af73f41035a212adff4

2018-07-01 13:54 +0000 [f30ebd3823]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: Hold module reference for publications.

	  Incoming publications need to ensure that the module remains
	  loaded for the lifetime of them. This is now done by holding
	  a reference to the module while the publication exists. This
	  mirrors that of inbound subscriptions.

	  ASTERISK-27783

	  Change-Id: Ia98c95a15e11af25728d5fb3e56e12cda0cfc7c0

2018-05-21 07:24 +0000 [9d3f3a4b0a]  Robert Mordec <r.mordec@slican.pl>

	* app_confbridge: Bridge and announcers not removed if conference ends quickly

	  If a conference is ended very quickly after it was created (i.e., the
	  first user immediately hangs up) then the conference bridge and announcer
	  channels are not removed.

	  When a conference is created, the push_announcer() function is added to
	  the playback queue task processor and the conference object reference is
	  bumped.  If a conference is ended while the push_announcer() function is
	  still going then the ao2_cleanup(conference) at the end of
	  push_announcer() will call the destructor function -
	  destroy_conference_bridge().

	  The destroy_conference_bridge() function will then add the
	  hangup_playback() task to the playback queue and will wait for it to end.
	  Since it is already a current task of the playback queue it will wait
	  forever.

	  This patch makes the conference thread call push_announcer() directly.
	  This way the conference object reference bump is not needed.  Since the
	  playback queue task processor is only used by the conference thread
	  itself, there is no danger of trying to play announcements before the
	  announcer is pushed to the bridge.

	  ASTERISK-27870 #close

	  Change-Id: I947a50fb121422d90fd1816d643a54d75185a477

2018-06-21 00:28 +0000 [db02218db2]  Matthew Fredrickson <creslin@digium.com>

	* main/cdr.c: Alleviate CDR deadlock

	  There is a rare case (do to the infrequent timing involved) where
	  CDR submission threads in batch mode can deadlock with a currently
	  running CDR batch process.  This patch should remove the need for
	  holding the lock in the scheduler and should clean a few code
	  paths up that inconsistently submitted new work to the CDR batch
	  processor.

	  ASTERISK-27909

	  Change-Id: I6333e865db7c593c102c2fd948cecdb96481974d
	  Reported-by: Denis Lebedev

2018-06-25 22:08 +0000 [4b9bf4f5e0]  Kirsty Tyerman <kirsty.tyerman@boeing.com>

	* pbx_dundi: reordered unloading of module pbx_dundi

	  Destroy scheduler after peers are pruned to stop dundi crashing when
	  unloading module.

	  ASTERISK-26987
	  Reported-by: Kirsty Tyerman

	  Change-Id: Ic12e562cd90d8d813a9e97f302045091f59e3c05

2018-06-28 12:07 +0000 [7a238fe74d]  Richard Mudgett <rmudgett@digium.com>

	* AMI SendText action: Fix to use correct thread to send the text.

	  The AMI action was directly sending the text to the channel driver.
	  However, this makes two threads attempt to handle media and runs afowl of
	  CHECK_BLOCKING.

	  * Queue a read action to make the channel's media handling thread actually
	  send the text message.  This changes the AMI actions success/fail response
	  to just mean the text was queued to be sent not that the text actually got
	  sent.  The channel driver may not even support sending text messages.

	  ASTERISK-27943

	  Change-Id: I9dce343d8fa634ba5a416a1326d8a6340f98c379

2018-06-25 07:37 +0000 [e3585353f6]  George Joseph <gjoseph@digium.com>

	* res_pjsip_messaging:  Allow application/* for in-dialog MESSAGEs

	  In addition to text/* content types, incoming_in_dialog_request now
	  accepts application/* content types.

	  Also fixed a length issue when copying the body text.  It was one
	  character short.

	  ASTERISK-27942

	  Change-Id: I4e54d8cc6158dc47eb8fdd6ba0108c6fd53f2818

2018-06-25 15:42 +0000 [5f12e2bd07]  George Joseph <gjoseph@digium.com>

	* app_confbridge:  Move participant info code to confbridge_manager.

	  With the participant info code in app_confbridge, we were still
	  in the process of adding the channel to the bridge when trying to send
	  an in-dialog MESSAGE.  This caused 2 threads to grab the channel
	  blocking flag at the same time.  To mitigate this, the participant
	  info code was moved to confbridge_manager so it runs after all
	  channel/bridge actions have finished.

	  Change-Id: I228806ac153074f45e0b35d5236166e92e132abd

2018-06-18 21:22 +0000 [880fbff6b7]  George Joseph <gjoseph@digium.com>

	* res_pjsip_session:  Add ability to accept multiple sdp answers

	  pjproject by default currently will follow media forked during an INVITE
	  on outbound calls if the To tag is different on a subsequent response as
	  that on an earlier response.  We handle this correctly.  There have
	  been reported cases where the To tag is the same but we still need to
	  follow the media.  The pjproject patch in this commit adds the
	  capability to sip_inv and also adds the capability to control it at
	  runtime.  The original "different tag" behavior was always controllable
	  at runtime but we never did anything with it and left it to default to
	  TRUE.

	  So, along with the pjproject patch, this commit adds options to both the
	  system and endpoint objects to control the two behaviors, and a small
	  logic change to session_inv_on_media_update in res_pjsip_session to
	  control the behavior at the endpoint level.

	  The default behavior for "different tags" remains the same at TRUE and
	  the default for "same tag" is FALSE.

	  Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6
	  ASTERISK-27936
	  Reported-by: Ross Beer

2018-06-21 11:45 +0000 [675e2ddb49]  Alexander Traud <pabstraud@compuserve.com>

	* uuid: Enable UUID in Solaris 11.

	  ASTERISK-27933
	  Reported by: bautsche

	  Change-Id: I9b8362824efbfb2a16981e46e85f7c8322908c49

2018-06-13 02:25 +0000 [184b375b41]  Kristian F. Høgh <kfh@uni-tel.dk>

	* app_queue: Add option for predial handlers on caller and callee channels

	  Add predial handler support to app_queue.  app_dial (ASTERISK_19548) and
	  app_originate (ASTERISK_26587) have the ability to execute predial
	  handlers on caller and callee channels.  This patch adds predial handlers
	  to app_queue and uses the same options as Dial and Originate (b and B).
	  The caller routine gets executed when the caller first enters the queue.
	  The callee routine gets executed for each queue member when they are about
	  to be called.

	  ASTERISK-27912

	  Change-Id: I5acf5c32587ee008658d12e8a8049eb8fa4d0f24

2018-06-21 16:39 +0000 [cad50d6dbf]  Richard Mudgett <rmudgett@digium.com>

	* VECTOR: Passing parameters with side effects to macros is dangerous.

	  * Fix several instances where we were bumping a ref in the parameter and
	  then unrefing the object if it failed.  The way the AST_VECTOR_APPEND()
	  and AST_VECTOR_REPLACE() macros are implemented means if it fails the new
	  value was never evaluated.

	  Change-Id: I2847872a455b11ea7e5b7ce697c0a455a1d0ac9a

2018-06-20 16:57 +0000 [aaaa6f4a4b]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c: Fix memory leak.

	  Made release the media_types vector in
	  softmix_bridge_stream_topology_changed().

	  Change-Id: Ide3f47e379b614879220dfeeb13843f9f2b177b5

2018-06-21 11:22 +0000 [bfeded7e62]  Alexander Traud <pabstraud@compuserve.com>

	* smsq: Remove an left-over special case for Solaris.

	  Actually, this case was never needed because the check below does the same.

	  Change-Id: Ia2fca4ba6c58c644a8b7cb2d9db8539728c14ffb

2018-06-21 11:17 +0000 [bbea9cfc3b]  Alexander Traud <pabstraud@compuserve.com>

	* res_http_post: Enable GMime in Solaris 11.

	  Change-Id: Ie434541f18f894c751d2e44bcb3efb3cac626019

2018-06-21 05:08 +0000 [7f3882c8e9]  Alexander Traud <pabstraud@compuserve.com>

	* codecs/ilbc: Compile in Solaris 11.

	  The symbol FS is the sampling frequency. That symbol is not used in Asterisk at
	  all and was a copy-and-paste of the iLBC reference code from the IETF RFC.
	  However, in Solaris, that symbol is defined by another header already. To
	  compile in Solaris, that symbol has to go.

	  Change-Id: I91ddbe5be7c00069c3a25abd5f58d7b2f04c51b1

2018-06-21 05:07 +0000 [9704c424f5]  Alexander Traud <pabstraud@compuserve.com>

	* chan_oss: Compile in Solaris 11.

	  M_READ existed already and was conflicting in name.

	  Change-Id: I02108e07ae7d2dc314fe1e6c706c17731095a3e4

2018-06-21 05:04 +0000 [6f47b84fbd]  Alexander Traud <pabstraud@compuserve.com>

	* func_env: Compile in Solaris 11.

	  Change-Id: Idc9b36720f3d29c90a35a6a1ae79a7f9e1aaf50e

2018-06-21 05:01 +0000 [a5c53bd323]  Alexander Traud <pabstraud@compuserve.com>

	* utils: Avoid an unused variable in Solaris 11.

	  With ./configure --enable-dev-mode[=noisy], the build fails because every
	  warning gets an error. Therefore, Asterisk has to be free of warnings and this
	  variable must go.

	  Change-Id: I63dd2bc4833b9bdb04602f83422d16caf289d46a

2018-06-21 04:59 +0000 [92109cf496]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable ./configure in Solaris 11.

	  ASTERISK-27931

	  Change-Id: If298ce7f03be227a3687b9c20d382c9c55a72404

2018-06-20 13:24 +0000 [d6721e1e4c]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable autotools in Solaris 11.

	  Because this was the last operating system which required a special case, a
	  version appended to the autotools, the whole version stuff is removed by this
	  change. This simplifies the script ./bootstrap.sh. Hopefully, this gives even
	  broader platform compatibility.

	  ASTERISK-27929
	  ASTERISK-27926

	  Change-Id: Id4cf433a1a7fa861d0210e1a2e16ca592b49fd5a

2018-06-13 11:33 +0000 [eb8bbe660e]  Richard Mudgett <rmudgett@digium.com>

	* channel.c: Make CHECK_BLOCKING() save thread LWP id for messages.

	  * Removed an unnecessary call to ast_channel_blocker_set() in
	  __ast_read().

	  ASTERISK-27625

	  Change-Id: I342168b999984666fb869cd519fe779583a73834

2018-06-13 16:41 +0000 [da54605b8a]  Richard Mudgett <rmudgett@digium.com>

	* ARI POST DTMF: Make not compete with channel's media thread.

	  There can be one and only one thread handling a channel's media at a time.
	  Otherwise, we don't know which thread is going to handle the media frames.

	  ASTERISK-27625

	  Change-Id: I4d6a2fe7386ea447ee199003bf8ad681cb30454e

2018-06-13 13:05 +0000 [7d874c1af7]  Richard Mudgett <rmudgett@digium.com>

	* AMI PlayDTMF Action: Make not compete with channel's media thread.

	  There can be one and only one thread handling a channel's media at a time.
	  Otherwise, we don't know which thread is going to handle the media frames.

	  ASTERISK-27625

	  Change-Id: Ia341f1a6f4d54f2022261abec9021fe5b2eb4905

2018-06-12 14:09 +0000 [080508d2eb]  Richard Mudgett <rmudgett@digium.com>

	* channel.c: Fix usage of CHECK_BLOCKING()

	  The CHECK_BLOCKING() macro is used to indicate if a channel's handling
	  thread is about to do a blocking operation (poll, read, or write) of
	  media.  A few operations such as ast_queue_frame(), soft hangup, and
	  masquerades use the indication to wake up the blocked thread to reevaluate
	  what is going on.

	  ASTERISK-27625

	  Change-Id: I4dfc33e01e60627d962efa29d0a4244cf151a84d

2018-06-18 18:04 +0000 [0989b63047]  Richard Mudgett <rmudgett@digium.com>

	* autoservice: Don't start channel autoservice if the thread is a user interface.

	  Executing dialplan functions from either AMI or ARI by getting a variable
	  could place the channel into autoservice.  However, these user interface
	  threads do not handle the channel's media so we wind up with two threads
	  attempting to handle the media.

	  There can be one and only one thread handling a channel's media at a time.
	  Otherwise, we don't know which thread is going to handle the media frames.

	  ASTERISK-27625

	  Change-Id: If2dc94ce15ddabf923ed1e2a65ea0ef56e013e49

2018-06-18 16:07 +0000 [91c3ac19cb]  Richard Mudgett <rmudgett@digium.com>

	* Dialplan functions: Fix some channel autoservice misuse.

	  * Fix off nominal paths leaving the channel in autoservice.
	  * Remove unnecessary start/stop channel autoservice.
	  * Fix channel locking around a channel datastore search.

	  Change-Id: I7ff2e42388064fe3149034ecae57604040b8b540

2018-06-19 10:43 +0000 [720c2d1da2]  Richard Mudgett <rmudgett@digium.com>

	* Fix some doxygen and curly placement.

	  Change-Id: I9a784a7c804120a8fa826c2a4cb9957e4b0b2fc8

2018-06-18 13:17 +0000 [c1686b8b3e]  Richard Mudgett <rmudgett@digium.com>

	* tcptls.h: Remove redundant SSL_CTX typedef.

	  It is invalid to typedef something more than once.  Though not all gcc
	  compilers on different OS's complain about it.

	  Change-Id: I5a7d4565990c985822d61ce75bde0b45f9870540

2018-06-12 15:13 +0000 [a470bb9e27]  Richard Mudgett <rmudgett@digium.com>

	* channel: Fix some more unprotected channel flag setting.

	  Change-Id: I34c3b1201b1de539945bcfdcb264fff30332d48c

2018-06-15 15:21 +0000 [8732d62334]  Matthew Fredrickson <creslin@digium.com>

	* menuselect/menuselect_curses: Resolves sprintf usage error

	  Acccording to the man page for sprintf, using the same buffer for
	  output as one used as an input yields undefined behavior.
	  This patch should work around this problem.

	  ASTERISK-27903
	  Reported-by: Alexander Traud

	  Change-Id: I2213dcb454aff26457e2e4cc9c6821276463ae3a

2018-06-12 09:30 +0000 [4c7ab73468]  Sam Wierema <sam@messagebird.com>

	* app_mp3: remove 10 seconds of silence after mp3 playback

	  This patch changes the way asterisk polls output from mpg123, instead
	  of waiting for 10 seconds(when playing an http url) it now uses a
	  timeout of one second and iterates 10 times using this same timeout.

	  The main difference is that for every timeout asterisk receives it now
	  checks if mpg123 is still running before poll again.

	  ASTERISK-27752

	  Change-Id: Ib7df8462e3e380cb328011890ad9270d9e9b4620

2018-06-13 04:40 +0000 [9d7958672b]  Alexander Traud <pabstraud@compuserve.com>

	* tests/test_utils: Repair ./configure --with-ssl=PATH.

	  ASTERISK-27914

	  Change-Id: Ibcab8f556ee77776f203cff8b06d776a673b7bc4

2018-06-04 20:31 +0000 [e1908ea484]  Kirsty Tyerman <kirsty.tyerman@boeing.com>

	* chan_iax2: better handling for timeout and EINTR

	  The iax2 module is not handling timeout and EINTR case properly. Mainly when
	  there is an interupt to the kernel thread. In case of ast_io_wait recieves a
	  signal, or timeout it can be an error or return 0 which eventually escapes the
	  thread loop, so that it cant recieve any data. This then causes the modules
	  receive queue to build up on the kernel and stop any communications via iax in
	  asterisk.

	  The proposed patch is for the iax module, so that timeout and EINTR does not
	  exit the thread.

	  ASTERISK-27705
	  Reported-by: Kirsty Tyerman

	  Change-Id: Ib4c32562f69335869adc1783608e940c3535fbfb

2018-05-31 16:22 +0000 [e7a7506f9c]  George Joseph <gjoseph@digium.com>

	* app_confbridge:  Enable sending events to participants

	  ConfBridge can now send events to participants via in-dialog MESSAGEs.
	  All current Confbridge events are supported, such as ConfbridgeJoin,
	  ConfbridgeLeave, etc.  In addition to those events, a new event
	  ConfbridgeWelcome has been added that will send a list of all
	  current participants to a new participant.

	  For all but the ConfbridgeWelcome event, the JSON message contains
	  information about the bridge, such as its id and name, and information
	  about the channel that triggered the event such as channel name,
	  callerid info, mute status, and the MSID labels for their audio and
	  video tracks. You can use the labels to correlate callerid and mute
	  status to specific video elements in a webrtc client.

	  To control this behavior, the following options have been added to
	  confbridge.conf:

	  bridge_profile/enable_events:  This must be enabled on any bridge where
	  events are desired.

	  user_profile/send_events:  This must be set for a user profile to send
	  events.  Different user profiles connected to the same bridge can have
	  different settings.  This allows admins to get events but not normal
	  users for instance.

	  user_profile/echo_events:  In some cases, you might not want the user
	  triggering the event to get the event sent back to them.  To prevent it,
	  set this to false.

	  A change was also made to res_pjsip_sdp_rtp to save the generated msid
	  to the stream so it can be re-used.  This allows participant A's video
	  stream to appear as the same label to all other participants.

	  Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e

2018-06-13 05:06 +0000 [b01fc2ef3d]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: Instead of ./configure use OPENSSL_NO_SRTP.

	  Previously, Asterisk used its script ./configure, to test whether OpenSSL was
	  built with no-srtp (or was simply too old). However, the header file
	  <openssl/opensslconf.h> is the preferred way to detect the local configuration
	  of OpenSSL.

	  As a positive side-effect the script ./configure does not interleave the
	  detection of the Open Settlement Protocol Toolkit (OSPTK) with the detection of
	  individual features of OpenSSL anymore.

	  Change-Id: I3c77c7b00b2ffa2e935632097fa057b9fdf480c0

2018-06-05 04:36 +0000 [41175caee0]  Joshua Colp <jcolp@digium.com>

	* rtp: Don't negotiate dynamic codecs using payload.

	  In Asterisk there are some dynamic codecs that have
	  a fixed payload number. This number was being improperly
	  used to negotiate the codec, instead of using the name
	  and sample rate. This could result in the wrong payload
	  number being negotiated for a codec.

	  This change makes it so that only static payloads
	  will be negotiated using their payload number.

	  ASTERISK-27848

	  Change-Id: Ia865830170fd3f808cdb33104f3d4c4ffdc77570

2018-04-16 14:13 +0000 [b649682caa]  Sean Bright <sean.bright@gmail.com>

	* AST-2018-007: iostreams potential DoS when client connection closed prematurely

	  Before Asterisk sends an HTTP response (at least in the case of errors),
	  it attempts to read & discard the content of the request. If the client
	  lies about the Content-Length, or the connection is closed from the
	  client side before "Content-Length" bytes are sent, the request handling
	  thread will busy loop.

	  ASTERISK-27807

	  Change-Id: I945c5fc888ed92be625b8c35039fc6d2aa89c762

2018-04-30 17:38 +0000 [81ac32a85f]  Richard Mudgett <rmudgett@digium.com>

	* AST-2018-008: Fix enumeration of endpoints from ACL rejected addresses.

	  When endpoint specific ACL rules block a SIP request they respond with a
	  403 forbidden.  However, if an endpoint is not identified then a 401
	  unauthorized response is sent.  This vulnerability just discloses which
	  requests hit a defined endpoint.  The ACL rules cannot be bypassed to gain
	  access to the disclosed endpoints.

	  * Made endpoint specific ACL rules now respond with a 401 unauthorized
	  which is the same as if an endpoint were not identified.  The fix is
	  accomplished by replacing the found endpoint with the artificial endpoint
	  which always fails authentication.

	  ASTERISK-27818

	  Change-Id: Icb275a54ff8e2df6c671a6d9bda37b5d732b3b32

2018-06-08 15:02 +0000 [0743ad6422]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: Allow OpenSSL configured with no-deprecated.

	  Furthermore, allow OpenSSL configured with no-dh. Additionally, this change
	  allows auto-negotiation of the elliptic curve/group for servers, not only with
	  OpenSSL 1.0.2 but also with OpenSSL 1.1.0 and newer. This enables X25519
	  (since OpenSSL 1.1.0) and X448 (since OpenSSL 1.1.1) as a side-effect.

	  ASTERISK-27910

	  Change-Id: I5b0dd47c5194ee17f830f869d629d7ef212cf537

2018-06-08 06:01 +0000 [99aed78078]  Alexander Traud <pabstraud@compuserve.com>

	* crypto.h: Repair ./configure --with-ssl=PATH.

	  ASTERISK-27908

	  Change-Id: Iac49d9f82faeb8a4611c6805906bd6d650b1b1d8

2018-06-08 04:03 +0000 [ca682f0030]  Alexander Traud <pabstraud@compuserve.com>

	* res_crypto: Allow OpenSSL configured with no-deprecated.

	  The header <openssl/rsa.h> had to be included explicitly.

	  ASTERISK-27906

	  Change-Id: I41743801eed998c039d73db7a0762d104a4f75b2

2018-06-08 02:41 +0000 [234bf4b7ff]  Alexander Traud <pabstraud@compuserve.com>

	* res_srtp: Repair ./configure --with-ssl=PATH.

	  ASTERISK-27905

	  Change-Id: Ibb7dc148a0048f4f9c3b12937ba4240dff0d15e2

2018-05-31 10:25 +0000 [65ff2f057a]  Alexei Gradinari <alex2grad@gmail.com>

	* func_odbc: NODATA if SQLNumResultCols returned 0 columns on readsql

	  The functions acf_odbc_read/cli_odbc_read ignore a number of columns
	  returned by the SQLNumResultCols.
	  If the number of columns is zero it means no data.
	  In this case, a SQLFetch function has to be not called,
	  because it will cause an error.

	  ASTERISK-27888 #close

	  Change-Id: Ie0f7bdac6c405aa5bbd38932c7b831f90729ee19

2018-06-07 08:46 +0000 [1725eaf8fb]  George Joseph <gjoseph@digium.com>

	* chan_pjsip:  Register for "BEFORE_MEDIA" responses

	  chan_pjsip wasn't registering for "BEFORE_MEDIA" responses which meant
	  it was not updating HANGUPCAUSE for 4XX responses.  If the remote end
	  sent a "180 Ringing", then a "486 Busy", the hangup cause was left at
	  "180 Normal Clearing".

	  * Removed chan_pjsip_incoming_response from the original session
	    supplement (which was handling only "AFTER MEDIA") and added it to a
	    new session supplement which accepts both "BEFORE_MEDIA" and
	    "AFTER_MEDIA".

	  * Also cleaned up some cleanup code in load module.

	  ASTERISK-27902

	  Change-Id: If9b860541887aca8ac2c9f2ed51ceb0550fb007a

2018-06-07 07:19 +0000 [9f2eb17005]  Alexander Traud <pabstraud@compuserve.com>

	* ooh323c: GCC 8.1 warned about output truncated before terminating nul.

	  ASTERISK-27901

	  Change-Id: I5a8e894f4924ef52e3094f6870656a559d67f3d7

2018-06-05 13:43 +0000 [7af5e86821]  Alexei Gradinari <alex2grad@gmail.com>

	* pjsip_options: show/reload AOR qualify options using CLI

	  Currentrly pjsip_options code does not handle the situation when the
	  AOR qualify options were changed.

	  Also there is no way to find out what qualify options are using.

	  This patch add CLI commands to show and synchronize Aor qualify options:
	  pjsip show qualify endpoint <id>
	      Show the current qualify options for all Aors on the PJSIP endpoint.
	  pjsip show qualify aor <id>
	      Show the PJSIP Aor current qualify options.
	  pjsip reload qualify endpoint <id>
	      Synchronize the qualify options for all Aors on the PJSIP endpoint.
	  pjsip reload qualify aor <id>
	      Synchronize the PJSIP Aor qualify options.

	  ASTERISK-27872

	  Change-Id: I1746d10ef2b7954f2293f2e606cdd7428068c38c

2018-05-22 16:21 +0000 [e46b442e38]  Alexei Gradinari <alex2grad@gmail.com>

	* pjsip_options: handle modification of qualify options in realtime

	  Currentrly pjsip_options code does not handle the situation when the
	  qualify options were changed in realtime database.
	  Only 'module reload res_pjsip' helps.

	  This patch add a check on contact add/update observers if the contact
	  qualify options are different than local aor qualify options.
	  If the qualify options were modified then synchronize
	  the pjsip_options AOR local state.

	  ASTERISK-27872

	  Change-Id: Id55210a18e62ed5d35a88e408d5fe84a3c513c62

2018-05-30 01:12 +0000 [e078558038]  Pirmin Walthert <infos@nappsoft.ch>

	* bridge_channel.c: Fix Deadlock when using Local channels and fax gateway

	  ast_indicate is invoked with the bridge locked. As ast_indicate locks the
	  other end of the bridge as well this can lead to a deadlock in some situations.
	  (Especially when a different thread does the same in the reverse order).
	  This patch calls ast_indicate after unlocking the bridge which fixes the
	  deadlock. Calling ast_indicate with these parameters without locking the
	  bridge should be safe as this is done at different places without a
	  bridge lock.

	  ASTERISK-27094 #close
	  Reported-by: David Brillert

	  Change-Id: I5f86c1e2ce75b9929a36ab589b18c450e62ea35f

2018-06-04 09:50 +0000 [437ab41881]  George Joseph <gjoseph@digium.com>

	* app_sendtext:  Allow content types other than text/plain

	  There was no real reason to limit the conteny type to text/plain other
	  than that's what it was limited to before.  Now any text/* content
	  type will be allowed for channel drivers that don't support enhanced
	  messaging and any type will be allowed for channel drivers that do
	  support enhanced messaging.

	  Change-Id: I94a90cfee98b4bc8e22aa5c0b6afb7b862f979d9

2018-05-28 19:17 +0000 [a7f4121238]  William McCall <william.mccall@gmail.com>

	* app_confbridge: Add talking indicator for ConfBridgeList AMI response

	  When an AMI client connects, it cannot determine if a user was talking
	  prior to a transition in the user speaking state (which would generate
	  a ConfbridgeTalking event). This patch causes app_confbridge to track the
	  talking state and make this state available via ConfBridgeList.

	  ASTERISK-27877 #close

	  Change-Id: I19b5284f34966c3fda94f5b99a7e40e6b89767c6

2018-05-29 12:28 +0000 [6bbede84fb]  Richard Mudgett <rmudgett@digium.com>

	* app_meetme: Fix manager event documentation for several events.

	  The MeetmeJoin, MeetmeLeave, MeetmeEnd, MeetmeMute, MeetmeTalking, and
	  MeetmeTalkRequest AMI events were documented with sending out a Usernum
	  header when the User header was actually output.

	  * Change the online documentation to match reality.

	  ASTERISK-27873
	  ASTERISK-25261

	  Change-Id: I437bc70618d07c183c9624b7069c2fcae7f17a39

2018-05-28 10:29 +0000 [24503fb600]  Alexander Traud <pabstraud@compuserve.com>

	* tcptls.h: Repair ./configure --with-ssl=PATH.

	  asterisk/tcptls.h was included (explicitly, implicitly, or transitively). Those
	  inclusions got replaced by forward declarations. As side effect, the inclusions
	  got completed.

	  ASTERISK-27878

	  Change-Id: I9d102728e30336d6522e5e4ae9e964013a0835f7

2018-05-25 09:55 +0000 [d36338ce2b]  Alexander Traud <pabstraud@compuserve.com>

	* tcptls: Allow OpenSSL configured with no-dh.

	  Additionally, this change allows auto-negotiation of the elliptic curve/group
	  for servers, not only with OpenSSL 1.0.2 but also with OpenSSL 1.1.0 and newer.
	  This enables X25519 (since OpenSSL 1.1.0) and X448 (since OpenSSL 1.1.1) as a
	  side-effect.

	  ASTERISK-27876

	  Change-Id: I62c2aba4a630aefc231b71f646207e8c027d9497

2018-05-25 07:22 +0000 [91616f4524]  Alexander Traud <pabstraud@compuserve.com>

	* tcptls: Allow OpenSSL 1.1.x configured with enable-ssl3-method no-deprecated.

	  ASTERISK-27874

	  Change-Id: Ica65113511c7a1c13f7988e7d9e7d9e7f3f620dd

2018-05-15 08:45 +0000 [2bf26ce5ac]  George Joseph <gjoseph@digium.com>

	* ast_coredumper:  Fix output directory and variable precedence

	  The OUTPUTDIR variable in ast_debug_tools.conf.sample is now set
	  to "/tmp" instead of "/some/directory".

	  Variables set on the command line or that are already in the
	  environment now take predecence over variables set in the config files.

	  ASTERISK-27846
	  Reported by: Ted G

	  Change-Id: Ie8baec52d531886bf5849ec1d59bb59dc87ad387

2018-05-09 08:31 +0000 [c5d2bf05f4]  Torrey Searle <torrey@voxbone.com>

	* res/res_rtp_asterisk: ensure marker bit is correctly set on ssrc change

	  Certain race conditions between changing bridge types and DTMF can
	  cause the current FLAG_NEED_MARKER_BIT to send the marker bit before
	  the actual first packet of native bridging.

	  This logic keeps track of the ssrc the bridge is currently sending
	  and will correctly ensure the marker bit is set if SSRC as changed
	  from the previous sent packet.

	  ASTERISK-27845

	  Change-Id: I01858bd0235f1e5e629e20de71b422b16f55759b

2018-04-23 09:04 +0000 [a507c73a78]  Joshua Colp <jcolp@digium.com>

	* rtp: Add support for RTP extension negotiation and abs-send-time.

	  When RTP was originally created it had the ability to place a single
	  extension in an RTP packet. In practice people wanted to potentially
	  put multiple extensions in one and so RFC 5285 (obsoleted by RFC
	  8285) came into existence. This allows RTP extensions to be negotiated
	  with a unique identifier to be used in the RTP packet, allowing
	  multiple extensions to be present in the packet.

	  This change extends the RTP engine API to add support for this. A
	  user of it can enable extensions and the API provides the ability to
	  retrieve the information (to construct SDP for example) and to provide
	  negotiated information (from SDP). The end result is that the RTP
	  engine can then query to see if the extension has been negotiated and
	  what unique identifier is to be used. It is then up to the RTP engine
	  implementation to construct the packet appropriately.

	  The first extension to use this support is abs-send-time which is
	  defined in the REMB draft[1] and is a second timestamp placed in an
	  RTP packet which is for when the packet has left the sending system.
	  It is used to more accurately determine the available bandwidth.

	  ASTERISK-27831

	  [1] https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03

	  Change-Id: I508deac557867b1e27fc7339be890c8018171588

2018-05-22 17:17 +0000 [1bec0c73b3]  Richard Mudgett <rmudgett@digium.com>

	* channel.c: Fix off nominal channel allocation failure path.

	  __ast_channel_alloc_ap() had a failure exit path that hadn't setup the fd
	  descriptors to -1 yet.  The destructor would then attempt to close these
	  fd's that had never been opened.

	  Change-Id: Icf21093f36c60781e8cf6ee9d586536302af33e3

2018-05-18 12:46 +0000 [d402594f74]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: Update year Copyright and fix missing tabs in documentation

	  Change-Id: Ieb8faf37dc765463ee5dbca1d1343242c756b1c7

2018-05-18 16:45 +0000 [39632c7e00]  Alexei Gradinari <alex2grad@gmail.com>

	* config.c: Fix successful DELETE treated as failure

	  The config engine destroy_func callback function returns the number of
	  rows deleted or -1 on error.  But the function
	  ast_destroy_realtime_fields treated non-zero return values as error.

	  ASTERISK-27863

	  Change-Id: Ied02b38e8196cb03043e609a0679feebd288d17b

2018-05-14 06:07 +0000 [9f9dce05b2]  Matthew Fredrickson <creslin@digium.com>

	* netsock2: Add ast_sockaddr_resolve_first_af to netsock2 public API

	  This function originally was used in chan_sip to enable some simplifying
	  assumptions and eventually was copy and pasted into res_pjsip_logger and
	  res_hep.  Since it's replicated in three places, it's probably best to
	  move it into the public netsock2 API for these modules to use.

	  Change-Id: Id52e23be885601c51d70259f62de1a5e59d38d04

2018-05-20 06:36 +0000 [1424f42d25]  Alexander Traud <pabstraud@compuserve.com>

	* libasteriskssl: Allow OpenSSL 1.0.2 configured with no-deprecated.

	  Use CRYPTO_set_id_callback(.) only with OpenSSL 0.9.8 and older.

	  ASTERISK-27867

	  Change-Id: Iadd58d5bf6f538eb224203970a4e88e26f259655

2018-05-19 08:23 +0000 [2228ae3f27]  Alexander Traud <pabstraud@compuserve.com>

	* tcptls: Repair ./configure --with-ssl=PATH.

	  SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 got discovered without honoring a PATH.

	  ASTERISK-27865

	  Change-Id: I8cd358eed7411726d08fa7b01691bef122fbeb71

2018-03-27 18:53 +0000 [2ca3b6d9cc]  Nic Colledge <nic@njcolledge.net>

	* app_voicemail: Fix data-type mismatch between app_voicemail and database

	  Fix data-type mismatch between app_voicemail and database columns
	  exposed by new version of MariaDB

	  ASTERISK-27760

	  Change-Id: I8543ad480a08c98be78bde1ee870e6e6c84b2c5b

2018-05-12 06:53 +0000 [97f20fe5ed]  Nic Colledge <nic@njcolledge.net>

	* app_voicemail: Fix incorrect msg leaving/retrieving an ODBC voicemail

	  Correct the log warning message shown when ODBC voicemail
	  retrieve_file is called and there is a null value in the category
	  column.
	  A more meaningfull message is now written at debug level.

	  ASTERISK-27853

	  Change-Id: Ic36e97d5eb070a23a12ba45972f6b53e2182a3f4

2018-04-17 21:15 +0000 [52ed6bcc8f]  Brian P. Martin <asterisk-forum@silverflash.net>

	* chan_mobile: support handling of caller-id names ("cnam").

	  Add support to handle caller-ID names ("cnam") in addition to caller-ID
	  numbers.  The prior code ignored the caller-ID name altogether, and
	  used the local name for the cell phone (e.g. "my-iphone") in its place.

	  Note: as of this writing, at least some Android phones don't pass cnam to
	  us. This can be seen by issuing "core set debug 2" in the CLI and watching
	  the "CLIP" record when a call comes in.  If cnam isn't in the CLIP record,
	  there's nothing we can do to provide one.  We'll provide a null cnam field,
	  so later Asterisk processes know to try other sources (e.g. cidname database,
	  OpenCNAM, etc.).

	  Reported by: Brian Martin
	  Tested by: Brian Martin
	  ASTERISK-27726

	  Change-Id: I89490d85fa406c36261879c50ae5e65595538ba5

2018-05-17 01:58 +0000 [f10fc135d4]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip_endpoint_identifier_ip: Unregister the module for headers.

	  Asterisk uses Reference Counting to track whether a module can be unloaded.
	  Every consumer who requires a module, increases the reference count. When the
	  consumer goes, is unloaded itself, it has to decrease the reference count on
	  all its used/required modules. That way
	   core stop gracefully
	  works on the command-line interface (CLI): One module after the other is
	  unloaded. A recent change broke this for the module res_pjsip.

	  ASTERISK-27861

	  Change-Id: I261abcb411d026bbb0691cc78f28300bfd3103a3

2018-05-11 12:49 +0000 [71d1e8d8c8]  Alexander Traud <pabstraud@compuserve.com>

	* rtp_engine: Remove the double assigned RTP payload ID of H.263+.

	  Mantis-3709 (Commit 68ff3c3, Asterisk 1.2) added support for the video format
	  H.263+. For this, the RTP payload ID 103 got assigned statically. Commit f1aadc8
	  assigned another payload ID 98 for this format in Asterisk 1.6.

	  Change-Id: I90e35b158487f8f1f8187da6241b54cd3b74e667

2018-05-11 12:26 +0000 [4722a653f4]  Corey Farrell <git@cfware.com>

	* cli: Display correct unit for HTTP timeout in "manager show settings".

	  HTTP timeout is in seconds, not minutes.

	  ASTERISK-27852 #close

	  Change-Id: Ie6640835cb07307555741f9b559c2eb876d9343e

2018-05-11 10:37 +0000 [263637a38d]  Alexander Traud <pabstraud@compuserve.com>

	* rtp_engine: Avoid a typo error in Doxygen for ast_rtp_codecs_find_payload_code.

	  Change-Id: Ica089d4507a27ddfc4ce3a88d697ffbef378de48

2018-05-06 21:17 +0000 [b5914d90ac]  Corey Farrell <git@cfware.com>

	* Fix GCC 8 build issues.

	  This fixes build warnings found by GCC 8.  In some cases format
	  truncation is intentional so the warning is just suppressed.

	  ASTERISK-27824 #close

	  Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84

2018-05-11 07:10 +0000 [919b0eb3f2]  Alexander Traud <pabstraud@compuserve.com>

	* rtp_engine: Allow Media Formats with add_static_payload(-1) on egress again.

	  This issue affected only installations with rtp_use_dynamic=yes in asterisk.conf
	  which is the default since Asterisk 15. Codec 2 and SiLK were built-in examples
	  of media formats which were affected.

	  ASTERISK-27850
	  Reported by: Dinis Brazão, Selene Feigl

	  Change-Id: I08c1e76433a67e4350141d38cacf3a1cb5086496

2018-05-09 09:30 +0000 [2e37684913]  Corey Farrell <git@cfware.com>

	* git: Ignore *.orig.

	  This prevents accidental commit of files created by patch.

	  Change-Id: I68380db61f0f9d620046f719ccd978811d0e9964

2018-04-18 02:27 +0000 [2d81709ab1]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Enable python3 compatibility.

	  The script remains compatible with Python 2.7 but now also works with
	  Python 3.3 and newer; to ease the migration from chan_sip to chan_pjsip.

	  ASTERISK-27811

	  Change-Id: I59cc6b52a1a89777eebcf25b3023bdf93babf835

2018-05-08 14:28 +0000 [cea87fe7b8]  Corey Farrell <git@cfware.com>

	* makeopts.in: Remove unused/undefined AST_MARCH_NATIVE.

	  Change-Id: I617a96ebb83ec99f5d3176bbbee2d2a272ccb203

2018-05-08 04:59 +0000 [9f1e1d153a]  Jaco Kroon <jaco@uls.co.za>

	* manager: fix digest auth for ami/http mechanism.

	  Due to a fixed size buffer the digest authentication could be
	  incorrectly calculated if a large URI was provided, causing
	  authentication failure. The buffer is now dynamically allocated to allow
	  any size URI within the normal limits of the HTTP request size.

	  ASTERISK-27841

	  Change-Id: I660609db13b8f9e5f9567f339dd804f4985d41b3

2018-05-04 13:47 +0000 [d855658f23]  Corey Farrell <git@cfware.com>

	* app_macro: Prevent infinite loop in find_matching_priority.

	  Use AST_PBX_MAX_STACK to escape if we recurse 128 times.  This will
	  prevent crash if dialplan contains an include loop.  Log an error when
	  this occurs, at most one message per call to Macro() so we avoid logger
	  spam.

	  ASTERISK-26570 #close

	  Change-Id: I6c71b76998c31434391b150de055ae9a531e31da

2018-01-11 06:37 +0000 [f4c360143b]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* cdr_mysql: my_connect_db(): reduce indentation

	  ASTERISK-27572

	  Change-Id: I00bd5363ac94c764c56d8626a5945ed7f3934fcb

2018-01-11 06:33 +0000 [2e44adf1c3]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* cdr_mysql: split mysql init out of my_load_module

	  Split out mysql connection parts to a separate my_connect_db().

	  ASTERISK-27572

	  Change-Id: If2ee676056067cc693ff08be68ee4944bf35b49f

2018-05-04 16:07 +0000 [8f55f7c333]  Matthew Fredrickson <creslin@digium.com>

	* res_hep: Adds hostname resolution support for capture_address

	  Previously, only an IP address would be accepted for the capture_address config
	  setting in hep.conf.  This change allows capture_address to be a resolvable
	  hostname or an IP address.

	  ASTERISK-27796 #close
	  Reported-By: Sebastian Gutierrez

	  Change-Id: I33e1a37a8b86e20505dadeda760b861a9ef51f6f

2018-04-20 18:12 +0000 [7528b86cad]  Joshua Colp <jcolp@digium.com>

	* stream: Make the topology a reference counted object.

	  The stream topology has no lock of its own resulting in
	  another lock protecting it in some way (for example the
	  channel lock). If multiple channels are being juggled at
	  the same time this can be problematic. This change makes
	  the topology a reference counted object instead which
	  guarantees it will remain valid even without the channel
	  lock being held.

	  Change-Id: I4f4d3dd856a033ed55fe218c3a4fab364afedb03

2018-03-21 07:30 +0000 [6301531416]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* chan_dahdi: Configurable dialed digit timeouts

	  Analog phones dial overlap dialing and it is chan_dahdi's job to read the
	  numbers.  It has three timeout constants that this commit converts to
	  channel-level configuration options:

	  * firstdigit_timeout: Default time (ms) to detect first digit

	  * interdigit_timeout: Default time (ms) to detect following digits

	  * matchdigit_timeout: Default time (ms) to wait in case of ambiguous
	  match.  This happens when the dialed digits match a number in the current
	  context but are also the prefix of another number.

	  Change-Id: Ib728fa900a4f6ae56d1ed810aba61b6593fb7213

2018-05-03 06:34 +0000 [de3ca9bada]  Joshua Colp <jcolp@digium.com>

	* res_ari: Remove requirement that body exists when debug is on.

	  The "ari set debug" code for incoming requests incorrectly assumed
	  that all requests would contain a body. If one did not exist the
	  request would be incorrectly rejected. The response that was sent
	  was also incomplete as an incorrect function was used to construct
	  the response.

	  The code has now been changed to no longer require a request to have
	  a body and the response updated to use the correct function.

	  ASTERISK-27801

	  Change-Id: I4eef036ad54550a4368118cc348765ecac25e0f8

2018-04-30 15:15 +0000 [069a0b7593]  Sean Bright <sean.bright@gmail.com>

	* iostreams: Add some documentation for the ast_iostream_* functions

	  Change-Id: Id71b87637f0a484eb5a1cd26c3d1c7c15c7dcf26

2018-05-02 07:43 +0000 [239074c759]  Sean Bright <sean.bright@gmail.com>

	* pjsip: Increase maximum number of usable ciphers & other cleanups

	  * Increase maximum number of ciphers from 100 to 256 (or whatever
	    PJ_SSL_SOCK_MAX_CIPHERS is #define'd to)

	  * Simplify logic in cipher_name_to_id()

	  * Make signed/unsigned comparison consistent

	  Re: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=897412

	  Reported by: Ondřej Holas

	  Change-Id: Iea620f03915a1b873e79743154255c3148a514e7

2018-04-30 17:24 +0000 [11b7de82c5]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip/pjsip_distributor.c: Add missing off-nominal request response.

	  Change-Id: I389579b39c523d1d1e8ce020ef549a8bb5781c9b

2018-04-30 17:20 +0000 [6cab3c836a]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip/pjsip_distributor.c: Pull some assignments out of if tests.

	  Change-Id: I3d30d638b53a4bbe9bf9aad853c649d583894112

2018-04-30 09:38 +0000 [afdca5c68c]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Always update SRTP on local SSRC change.

	  When the local SSRC changes we need to update the SRTP information
	  so that the proper key is used. This is commonly done as a result
	  of bridging two channels together. Previously we only updated
	  the SRTP information if media had already flowed, but in practice
	  the channel driver may have already performed SRTP negotiation and
	  set up the previous SSRC. We now always do it on a local SSRC
	  change.

	  ASTERISK-27795
	  ASTERISK-27800

	  Change-Id: Ia7c8e74c28841388b5244ac0b8fd6c1dc6ee4c10

2018-02-13 12:55 +0000 [0827d5cc53]  Gaurav Khurana <gkhurana@godaddy.com>

	* Add the ability to read the media file type from HTTP header for playback

	  How it works today:
	  media_cache tries to parse out the extension of the media file to be played
	  from the URI provided to Asterisk while caching the file.

	  What's expected:
	  Better will be to have Asterisk get extension from other ways too. One of the
	  common ways is to get the type of content from the CONTENT-TYPE header in the
	  HTTP response for fetching the media file using the URI provided.

	  Steps to Reproduce:
	  Provide a URL of the form: http://host/media/1234 to Asterisk for media
	  playback. It fails to play and logs show the following error line:

	  [Sep 15 15:48:05] WARNING [29148] [C-00000092] file.c:
	  File http://host/media/1234 does not exist in any format

	  Scenario this issue is blocking:
	  In the case where the media files are stored in some cloud object store,
	  following can block the media being played via Asterisk:

	  Cloud storage generally needs authenticated access to the storage. The way
	  to do that is by using signed URIs. With the signed URIs there's no way to
	  preserve the name of the file.
	  In most cases Cloud storage returns a key to access the object and preserving
	  file name is also not a thing there

	  ASTERISK-27286

	   Reporter: Gaurav Khurana

	  Change-Id: I1b14692a49b2c1ac67688f58757184122e92ba89

2018-04-25 01:57 +0000 [9c9f314f64]  Christof Lauber <christof.lauber@annax.ch>

	* pbx_lua:  Support displaying lua error message if no debug table exists

	  The lua_error_function assumed that lua's debug table and traceback function
	  are always accessible, which is not the case. This fixes the error message
	  'Error in the lua error handler' triggred by switch exec() function.
	  If this happens lua's error message is shown without traceback.

	  Change-Id: I34ba0a098f1ae06a3af7b4d1b098bd43f42f96c8

2017-12-11 12:34 +0000 [882e79b77e]  Joshua Colp <jcolp@digium.com>

	* pjsip: Rewrite OPTIONS support with new eyes.

	  The OPTIONS support in PJSIP has organically grown, like many things in
	  Asterisk.  It has been tweaked, changed, and adapted based on situations
	  run into.  Unfortunately this has taken its toll.  Configuration file
	  based objects have poor performance and even dynamic ones aren't that
	  great.

	  This change scraps the existing code and starts fresh with new eyes.  It
	  leverages all of the APIs made available such as sorcery observers and
	  serializers to provide a better implementation.

	  1.  The state of contacts, AORs, and endpoints relevant to the qualify
	  process is maintained.  This state can be updated by external forces (such
	  as a device registering/unregistering) and also the reload process.  This
	  state also includes the association between endpoints and AORs.

	  2.  AORs are scheduled and not contacts.  This reduces the amount of work
	  spent juggling scheduled items.

	  3.  Manipulation of which AORs are being qualified and the endpoint states
	  all occur within a serializer to reduce the conflict that can occur with
	  multiple threads attempting to modify things.

	  4.  Operations regarding an AOR use a serializer specific to that AOR.

	  5.  AORs and endpoint state act as state compositors.  They take input
	  from lower level objects (contacts feed AORs, AORs feed endpoint state)
	  and determine if a sufficient enough change has occurred to be fed further
	  up the chain.

	  6.  Realtime is supported by using observers to know when a contact has
	  been registered.  If state does not exist for the associated AOR then it
	  is retrieved and becomes active as appropriate.

	  The end result of all of this is best shown with a configuration file of
	  3000 endpoints each with an AOR that has a static contact.  In the old
	  code it would take over a minute to load and use all 8 of my cores.  This
	  new code takes 2-3 seconds and barely touches the CPU even while dealing
	  with all of the OPTIONS requests.

	  ASTERISK-26806

	  Change-Id: I6a5ebbfca9001dfe933eaeac4d3babd8d2e6f082

2017-12-22 13:11 +0000 [661fec4b59]  Richard Mudgett <rmudgett@digium.com>

	* core: Remove unused/incomplete SDP modules.

	  Change-Id: Icc28fbdc46f58e54a21554e6fe8b078f841b1f86

2018-04-18 15:59 +0000 [ff652711c7]  Kevin Harwell <kharwell@digium.com>

	* translate: generic plc not filled in after translation

	  If during translation a codec could not handle a given frame the translation
	  core would return NULL, thus not passing along the "missing" frame. Due to this
	  there was no frame to apply generic plc to, thus rendering it useless.

	  This patch makes it so the translation core produces an interpolated slin frame
	  in the cases where an attempt was made to translate to slin, but failed. This
	  interpolated frame is then passed along and can be used by the generic plc
	  algorithms to fill in the frame.

	  ASTERISK-27814 #close

	  Change-Id: I133d084da87adef913bf2ecc9c9240e3eaf4f40a

2018-04-20 07:40 +0000 [de9c0ede4a]  Joshua Colp <jcolp@digium.com>

	* bridge_softmix: Fix sporadic incorrect video stream mapping.

	  When an externally initiated renegotiation occurred it was
	  possible for video streams to be incorrectly remapped,
	  resulting in no video flowing to some receivers.

	  This change ensures that only the video source sets up
	  mappings and also that removed streams do not have mappings
	  set up.

	  Change-Id: Iab05f2254df3606670774844bb0935f833d3a9b0

2018-04-20 14:07 +0000 [c481afe873]  Alexander Anikin <may213@yandex.ru>

	* chan_ooh323: fix ooManualProgress/ooManualRingback on ooh323 debuggin on

	  Call ooManualProgress/Ringback outside of ast_debug function
	  when ooh323 debugging is on

	  ASTERISK-27812 #close
	  ASTERISK-26893 #close
	  Reported by: Dimos, Marco Giordani

	  Change-Id: I5873762e4f05824e7b6e94a19dd4eb56adbbbb79

2018-04-19 13:44 +0000 [5712a0ae52]  Joshua Colp <jcolp@digium.com>

	* bridge_softmix: Fix some REMB bugs.

	  This change fixes a bug where a REMB collector may be
	  freed twice, and also tweaks REMB combining such that if
	  there is no bitrate from anyone (or there are no sources)
	  we report 0 instead of using an old bitrate.

	  ASTERISK-27804

	  Change-Id: Ia9dc9c150043890ee7ff85e9cdec007f1a77fcfd

2018-04-20 07:13 +0000 [fe072f4405]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable IMAP storage on FreeBSD and DragonFly BSD.

	  ASTERISK-27639

	  Change-Id: I1347f3f2f3737010d0a80a5c30b5aaf71cf3ccb0

2018-04-20 05:50 +0000 [efe40ff671]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Add DragonFly BSD.

	  ASTERISK-27820

	  Change-Id: I310896143e94d65da1c2be3bb448204a8b86d557

2018-04-20 05:40 +0000 [d54637373a]  Alexander Traud <pabstraud@compuserve.com>

	* menuselect: Add DragonFly BSD.

	  In DragonFly BSD, added libraries from ports are placed into /usr/local.
	  Therefore, this directory must be added for the preprocessor, compiler, and
	  linker.

	  Beside that, the script ./configure was updated:
	  * OSARCH list was outdated and not used, removed.
	  * AC_CANONICAL_BUILD was not used.
	  * _REENTRANT, this feature test macro is obsolete.

	  ASTERISK-27820

	  Change-Id: I186d88d99cfa4de6569888e12ac97bd2f441c422

2018-04-20 05:18 +0000 [6e9a612293]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Add DragonFly BSD.

	  ASTERISK-27820

	  Change-Id: I718ddb000fe5184b1bdc7759da67a370a7520144

2018-04-18 11:41 +0000 [b437656c2e]  Chris-Savinovich <csavinovich@digium.com>

	* "confbridge show profile bridge" does not output "sfu" when video_mode is sfu

	  Fixes a bug on the "confbridge show profile bridge" cli command
	  that showed "video_mode=no video" when video_mode was set
	  to "sfu"

	  ASTERISK-27418  #close

	  Change-Id: I481e3172c7f872664c7ac7809879d541c9f031e9

2018-04-18 15:40 +0000 [179ae87cf4]  Corey Farrell <git@cfware.com>

	* Build System: Add missing ASTMM_LIBC to flex output.

	  Redirect libc allocation functions to use Asterisk functions for
	  main/ast_expr2f.c and res/ael/ael_lex.c.  This will resolve errors
	  produced by astmm.h when these files are regenerated, though other
	  issues still remain.

	  ASTERISK~27813

	  Change-Id: I7263e9e4217a17bde4ffaa2087a8f8aeb2a8588c

2018-04-18 13:40 +0000 [80e6952013]  Sean Bright <sean.bright@gmail.com>

	* format_pcm: Correct behavior of fseek and ftell for G.722

	  There are twice as many samples in the same number of bytes, so redefine
	  some of the G.722 format functions in terms of their PCM counterparts.

	  Change-Id: I6a8c7352624b930a5f2d9e4857f75283fa5dd9f9

2018-04-17 05:33 +0000 [95e8450194]  Alexander Anikin <may213@yandex.ru>

	* chan_ooh323: introduce localras config parameter

	  Introduce localras parameter that specify source IP
	  for connecting to Gatekeeper. Useful for multihome configurations.

	  ASTERISK-25129 #close
	  Reported by: Dmitry Melekhov
	  Tested by: Dmitry Melekhov

	  Change-Id: I0b604b01793f3e02a776502659e07cd3fc7e3097

2018-04-18 05:32 +0000 [446320f1d4]  Alexander Anikin <may213@yandex.ru>

	* chan_ooh323: Fix cppcheck warnings

	  Fix cppcheck warnings about redundant conditions and possible
	  null pointer usage

	  ASTERISK-27793 #close
	  Reported by: Ilya Shipitsin
	  Tested by: Ilya Shipitsin

	  Change-Id: I0b31933b062a23331dbac9a82b8bcfe345f406f6

2018-04-04 13:12 +0000 [8de3fa2b56]  Joshua Colp <jcolp@digium.com>

	* bridge_softmix / app_confbridge: Add support for REMB combining.

	  This change adds the ability for multiple REMB reports in
	  bridge_softmix to be combined according to a configured
	  behavior into a single report. This single report is sent
	  back to the sender of video, which adjusts the encoding bitrate
	  to be at or below the bitrate of the report. The available
	  behaviors are: lowest, highest, and average. Lowest uses the
	  lowest received bitrate. Highest uses the highest received
	  bitrate. Average goes through the received bitrates adding
	  them to the previous average and creates a new average.

	  Other behaviors can be added in the future and the existing
	  average one may be adjusted, but this provides the foundation
	  to do so.

	  Support for configuring which behavior to use has been
	  added to app_confbridge.

	  ASTERISK-27804

	  Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66

2018-04-13 15:14 +0000 [f79a372941]  George Joseph <gjoseph@digium.com>

	* streams: Add string metadata capability

	  Replaces the never used opaque data array.

	  Updated stream tests to include get/set metadata and
	  stream clone with metadata.

	  Added stream metadata dump to "core show channel"

	  Change-Id: Id7473aa4b374d7ab53046c20e321037ba9a56863

2018-04-13 15:17 +0000 [f7e7ce6ba2]  George Joseph <gjoseph@digium.com>

	* utils: Add ast_assert_return

	  Similar to pjproject's PJ_ASSERT_RETURN macro, this one will do the
	  following...

	  If the assert passes... NoOp

	  If the assert fails and AST_DEVMODE is defined, execute ast_assert()
	  then, if DO_CRASH isn't set, return from the calling function with
	  the supplied value.

	  If the assert fails and AST_DEVMODE is not defined, return from the
	  calling function with the supplied value.

	  The macro will execute a return without a value if one isn't suppled.

	  Change-Id: I0003844affeab550d5ff5bca7aa7cf8a559b873e

2018-04-10 16:09 +0000 [8135558bab]  George Joseph <gjoseph@digium.com>

	* app_sendtext:  Enhance SendText to support Enhanced Messaging

	  SendText now accepts new channel variables that can be used
	  to override the To and From display names and set the Content-Type
	  of a message.  Since you can now set Content-Type, other text/*
	  content types are now valid.

	  Change-Id: I648b4574478119f95de09d9f08e9595831b02830

2017-09-27 11:44 +0000 [4fb7967c73]  George Joseph <gjoseph@digium.com>

	* bridge_softmix:  Forward TEXT frames

	  Core bridging and, more specifically, bridge_softmix have been
	  enhanced to relay received frames of type TEXT or TEXT_DATA to all
	  participants in a softmix bridge.  res_pjsip_messaging and
	  chan_pjsip have been enhanced to take advantage of this so when
	  res_pjsip_messaging receives an in-dialog MESSAGE message from a
	  user in a conference call, it's relayed to all other participants
	  in the call.

	  res_pjsip_messaging already queues TEXT frames to the channel when
	  it receives an in-dialog MESSAGE from an endpoint and chan_pjsip
	  will send an MESSAGE when it gets a TEXT frame.  On a normal
	  point-to-point call, the frames are forwarded between the two
	  correctly.  bridge_softmix was not though so messages weren't
	  getting forwarded to conference bridge participants.  Even if they
	  were, the bridging code had no way to tell the participants who
	  sent the message so it would look like it came from the bridge
	  itself.

	  * The TEXT frame type doesn't allow storage of any meta data, such
	  as sender, on the frame so a new TEXT_DATA frame type was added that
	  uses the new ast_msg_data structure as its payload.  A channel
	  driver can queue a frame of that type when it receives a message
	  from outside.  A channel driver can use it for sending messages
	  by implementing the new send_text_data channel tech callback and
	  setting the new AST_CHAN_TP_SEND_TEXT_DATA flag in its tech
	  properties.  If set, the bridging/channel core will use it instead
	  of the original send_text callback and it will get the ast_msg_data
	  structure. Channel drivers aren't required to implement this.  Even
	  if a TEXT_DATA enabled driver uses it for incoming messages, an
	  outgoing channel driver that doesn't will still have it's send_text
	  callback called with only the message text just as before.

	  * res_pjsip_messaging now creates a TEXT_DATA frame for incoming
	  in-dialog messages and sets the "from" to the display name in the
	  "From" header, or if that's empty, the caller id name from the
	  channel.  This allows the chat client user to set a friendly name
	  for the chat.

	  * bridge_softmix now forwards TEXT and TEXT_DATA frames to all
	  participants (except the sender).

	  * A new function "ast_sendtext_data" was added to channel which
	  takes an ast_msg_data structure and calls a channel's
	  send_text_data callback, or if that's not defined, the original
	  send_text callback.

	  * bridge_channel now calls ast_sendtext_data for TEXT_DATA frame
	  types and ast_sendtext for TEXT frame types.

	  * chan_pjsip now uses the "from" name in the ast_msg_data structure
	  (if it exists) to set the "From" header display name on outgoing text
	  messages.

	  Change-Id: Idacf5900bfd5f22ab8cd235aa56dfad090d18489

2018-04-17 07:06 +0000 [8a1ffb050b]  Alexander Traud <pabstraud@compuserve.com>

	* utils/pval: Add -lBlocksRuntime for compiler clang conditionally.

	  ASTERISK-27809

	  Change-Id: I930b364a33d54cc08dedfcd5bb45f7e83242f134

2018-04-17 05:27 +0000 [3d9345e3ae]  Alexander Traud <pabstraud@compuserve.com>

	* chan_vpb: Avoid GNU old-style field designator extension.

	  clang 6.0 warned about this. Beside that, this change removes the used variable
	  'desc'.

	  ASTERISK-27808

	  Change-Id: Ia26bdcc0a562c058151814511cfcf70ecafa595b

2018-04-09 17:09 +0000 [f5d5083ea7]  Ben Ford <bford@digium.com>

	* res_rtp_asterisk: Add support for receiving and handling NACK requests.

	  Adds the ability to receive and handle incoming NACK requests if
	  retransmissions are enabled. If retransmissions are enabled, a data
	  buffer is allocated that stores packets being sent. If a NACK request
	  is received, the packet requested for retransmission is sent if it is
	  still in the buffer. In the same request, if any of the following 16
	  packets are marked as not received, those will be sent as well if
	  available, as outlined in RFC4585.

	  Also changes RTCP RR and SR to use media source SSRC instead of packet
	  source SSRC when determining which instance to use for RTCP reports.

	  For more information, refer to the wiki page:
	  https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements

	  ASTERISK-27806 #close

	  Change-Id: I7f7f124af3b9d5d2fd9cffc6ba8cb48a6fff06ec

2018-04-16 16:38 +0000 [d50d637764]  Richard Mudgett <rmudgett@digium.com>

	* stringfields: Collect extended stringfields into the stringfield section.

	  Use of extended stringfields is a temporary mechanism to avoid ABI
	  breakage in released branches without resorting to more inconvienient
	  methods.

	  * Collect existing extended stringfields into the parent stringfield
	  section of the struct.

	  Change-Id: I8d46d037801b4518837c3ea4b6df95ceadc9436b

2018-04-13 14:32 +0000 [4aeec6100f]  Ben Ford <bford@digium.com>

	* res_musiconhold: Don't restart MOH from beginning after announcement.

	  This reverts a problem introduced by the fix for ASTERISK_24329.
	  Now, when an announcement is played while waiting in a queue, music on
	  hold will not restart from the beginning of the sound file and will
	  instead pick up where it left off. However, the incorrect behavior in
	  ASTERISK_24329 is now present again; if an announcement X seconds
	  long is played when music on hold starts, music on hold will start X
	  seconds into the file.

	  ASTERISK-27774 #close
	  Reported by: lvl

	  Change-Id: I86b2885ee7063268f9b9747eddb788336ade989b

2018-03-28 15:13 +0000 [3bb6cf43b5]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_scheduler.c: Add ability to trace scheduled tasks.

	  When a scheduled task is created you can pass in the
	  AST_SIP_SCHED_TASK_TRACK flag.  This new flag causes scheduling events to
	  be logged.

	  Change-Id: I91967eb3d5a220915ce86881a28af772f9a7f56b

2018-03-27 11:04 +0000 [237d341bbd]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Split ast_sip_push_task_synchronous() to fit expectations.

	  ast_sip_push_task_synchronous() did not necessarily execute the passed in
	  task under the specified serializer.  If the current thread is any
	  registered pjsip thread then it would execute the task immediately instead
	  of under the specified serializer.  Reentrancy issues could result if the
	  task does not execute with the right serializer.

	  The original reason ast_sip_push_task_synchronous() checked to see if the
	  current thread was a registered pjsip thread was because of a deadlock
	  with masquerades and the channel technology's fixup callback
	  (ASTERISK_22936).  A subsequent masquerade deadlock fix (ASTERISK_24356)
	  involving call pickups avoided the original deadlock situation entirely.
	  The PJSIP channel technology's fixup callback no longer needed to call
	  ast_sip_push_task_synchronous().

	  However, there are a few places where this unexpected behavior is still
	  required to avoid deadlocks.  The pjsip monitor thread executes callbacks
	  that do calls to ast_sip_push_task_synchronous() that would deadlock if
	  the task were actually pushed to the specified serializer.  I ran into one
	  dealing with the pubsub subscriptions where an ao2 destructor called
	  ast_sip_push_task_synchronous().

	  * Split ast_sip_push_task_synchronous() into
	  ast_sip_push_task_wait_servant() and ast_sip_push_task_wait_serializer().
	  ast_sip_push_task_wait_servant() has the old behavior of
	  ast_sip_push_task_synchronous().  ast_sip_push_task_wait_serializer() has
	  the new behavior where the task is always executed by the specified
	  serializer or a picked serializer if one is not passed in.  Both functions
	  behave the same if the current thread is not a SIP servant.

	  * Redirected ast_sip_push_task_synchronous() to
	  ast_sip_push_task_wait_servant() to preserve API for released branches.

	  ASTERISK_26806

	  Change-Id: Id040fa42c0e5972f4c8deef380921461d213b9f3

2018-03-21 19:43 +0000 [c2f85e881d]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_scheduler.c: Fix some corner cases.

	  * Fix the periodic interval wander because it may take significant time
	  between the sched thread queueing the task in the serializer and the
	  serializer actually executing the task.  The time it takes to actually
	  execute the task was already taken into account.

	  * Pass a schtd ref to the serializer when we queue a scheduled task on
	  the serializer.  We don't want it going away on us while it is in the
	  serializer queue.

	  * Skip the scheduled task if the task was canceled between queueing the
	  task to the serializer and the serializer actually executing the task.

	  * Reorder struct ast_sip_sched_task to avoid unnecessary padding.  Removed
	  task_id and added next_periodic.

	  * Hold a ref to the passed in serializer so the serializer cannot go away
	  on the scheduled task.

	  ASTERISK_26806

	  Change-Id: I6c8046b75f6953792c8c30e55b836a4291143f24

2018-03-22 19:09 +0000 [96c4a57edf]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_scheduler.c: Sort "pjsip show scheduled_tasks" output.

	  * A side benefit is that the scheduled tasks are not completely blocked
	  while the CLI command executes.

	  * Adjusted the "Task Name" column width to have more room for longer
	  names.

	  Change-Id: Iec64aa463ee8b10eef90120e00c38b1fb444087e

2018-04-02 15:59 +0000 [429c758e48]  Evandro Cesar Arruda <ecarruda@gmail.com>

	* cdr_mysql: Compile error because MYSQL_PORT definition is missing

	  If it is not defined, it will add MYSQL_PORT definition. After some
	  research on MySQL/MariaDB development tree, I couldn't find any reference
	  to MYSQL_PORT definition in include files.

	  ASTERISK-27782 #close

	  Change-Id: Ieee56c836fc2e8bd021c456145bba04c6068bb77

2018-04-09 20:00 +0000 [0747ac893b]  Chris-Savinovich <csavinovich@digium.com>

	* res_pjsip_session: Rewrite o= with external_media_address.

	  It now appends the external IP address on the
	  o= line of the SDP packet.  The decision was made to write
	  the numeric IP address as opposed to the RFC that states
	  the FQDN should be used if and when available.  We believe
	  the usage of literal IP address will help avoid
	  potential problems.

	  ASTERISK-27614 #close

	  Change-Id: I84f3360f3606b8c4e8d161edb228799ec0b8a302

2018-02-22 12:18 +0000 [1cd704de36]  Nathan Bruning <nathan@iperity.com>

	* res_pjsip_notify.c: enable in-dialog NOTIFY

	  This patch adds support to send in-dialog SIP NOTIFY commands on
	  chan_pjsip channels, similar to the functionality recently added
	  for chan_sip (ASTERISK_27461).

	  This extends res_pjsip_notify to allow for in-dialog messages.

	  ASTERISK-27697

	  Change-Id: If7f3151a6d633e414d5dc319d5efc1443c43dd29

2018-03-22 13:35 +0000 [7157dcf83b]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_scheduler.c: Fix ao2 usage errors.

	  * Removed several invalid uses of OBJ_NOLOCK.  These uses resulted in the
	  'tasks' container being accessed without a lock in a multi-threaded
	  environment.  A recipe for crashes.

	  * Removed needlessly obtaining schtd object references.  If the caller
	  providing you a pointer to an object doesn't have a valid reference then
	  you cannot safely get one from it.

	  * Getting a ref to 'tasks' when you aren't copying the pointer into
	  another location is useless.  The 'tasks' container pointer is global.

	  * Removed many unnecessary uses of RAII_VAR.

	  * Make ast_sip_schedule_task() name parameter const.

	  ASTERISK_26806

	  Change-Id: I5c62488e651314e2a1dbc01f5b078a15512d73db

2018-03-23 06:49 +0000 [879e592baf]  Corey Farrell <git@cfware.com>

	* Build System: Enable python3 compatibility.

	  * Consistently use spaces in rest-api-templates/asterisk_processor.py.
	  * Exclude third-party from docs/full-en_US.xml.
	  * Add docs/full-en_US.xml to .gitignore.
	  * Use list() to convert python3 view.
	  * Use python3 print function.
	  * Replace cmp() with equivalent equation.
	  * Replace reference to out of scope subtype variable with name
	    parameter.
	  * Use unescaping triple bracket notation in mustache templates where
	    needed.  This causes behavior of Python2 to be maintained when using
	    Python3.
	  * Fix references to has_websocket / is_websocket in
	    res_ari_resource.c.mustache.
	  * Update calculation of has_websocket to use any().
	  * Use unicode mode for writing output file in transform.py.
	  * Replace 'from swagger_model import *' with explicit import of required
	    symbols.

	  I have not tested spandspflow2pcap.py or voicemailpwcheck.py, only the
	  print syntax has been fixed.

	  Change-Id: If5c5b556a2800d41a3e2cfef080ac2e151178c33

2018-04-05 18:33 +0000 [0c03eab962]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_refer/chan_sip: Fix INVITE with replaces transfer to ConfBridge

	  There is a problem when an INVITE-with-Replaces transfer targets a channel
	  in a ConfBridge.  The transfer will unconditionally swap out the
	  ConfBridge channel.  Unfortunately, the ConfBridge state will not be aware
	  of this change.  Unexpected behavior will happen as a result since
	  ConfBridge channels currently can only be replaced by a masquerade and not
	  normal bridge channel moves.

	  * We just need to pretend that the channel isn't in a bridge (like other
	  transfer methods already do) so the transfer channel will masquerade into
	  the ConfBridge channel.

	  Change-Id: I209beb0e748fa4f4b92a576f36afa8f495ba4c82

2018-03-28 07:27 +0000 [c7bd554094]  Joshua Colp <jcolp@digium.com>

	* pjsip / res_rtp_asterisk: Add support for sending REMB

	  This change allows chan_pjsip to be given an AST_FRAME_RTCP
	  containing REMB feedback and pass it to res_rtp_asterisk.
	  Once res_rtp_asterisk receives the frame a REMB RTCP feedback
	  packet is constructed with the appropriate contents and sent
	  to the remote endpoint.

	  ASTERISK-27776

	  Change-Id: Ic53f821c1560d8924907ad82c4d9c0bc322b38cd

2018-04-05 20:02 +0000 [39016e3582]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Fix minimum block word length for REMB.

	  The minimum block word length is actually 4, not 5.

	  Change-Id: I878542218225aed72c72bdf1b856fc822cd2d649

2018-04-05 18:48 +0000 [8a602f18db]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Queue video update on picture loss indication.

	  The previous payload specific feedback handling was very single
	  minded in that it just assumed everything should trigger a video
	  update. This was changed but the handling of picture loss indication
	  was not added. The result was that video may not flow. This change
	  adds it explicitly in.

	  Change-Id: I1894be02e39ee10a0af841b5a1dca5f0ec7d60b6

2018-04-05 17:40 +0000 [d72a2966da]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix INVITE with replaces channel ref leak.

	  Given the below call scenario:
	  A -> Ast1 -> B
	  C <- Ast2 <- B

	  1) A calls B through Ast1
	  2) B calls C through Ast2
	  3) B transfers A to C

	  When party B transfers A to C, B sends a REFER to Ast1 causing Ast1 to
	  send an INVITE with replaces to Ast2.  Ast2 then leaks a channel ref of
	  the channel between Ast1 and Ast2.

	  Channel ref leaks are easily seen in the CLI "core show channels" output.
	  The leaked channels appear in the output but you can do nothing with them
	  and they never go away unless you restart Asterisk.

	  * Properly account for the channel refs when imparting a channel into a
	  bridge when handling an INVITE with replaces in handle_invite_replaces().
	  The ast_bridge_impart() function steals a channel ref but the code didn't
	  account for how many refs were held by the code at the time and which ref
	  was stolen.

	  * Eliminated RAII_VAR in handle_invite_replaces().

	  ASTERISK-27740

	  Change-Id: I7edbed774314b55acf0067b2762bfe984ecaa9a4

2018-03-21 19:40 +0000 [71a67a98c4]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Update authenticate_qualify documentation.

	  Change-Id: I3811de0014b1ffe96d4a3b49cddd5d4ca02ee5d4

2018-04-02 16:49 +0000 [6774913e82]  Richard Mudgett <rmudgett@digium.com>

	* app_agent_pool.c: Fix off nominal ref leak.

	  Change-Id: Ib427ffc2c802620eaafb08b1c2a17dddd8fb8eb6

2018-04-04 10:02 +0000 [e40fd7a232]  Corey Farrell <git@cfware.com>

	* Build System: Strip '-std=c99' from CFLAGS provided by libraries.

	  Asterisk requires GNU C extensions.  On some systems certain libraries
	  may incorrectly push -std=c99 into CFLAGS, thus breaking the build.
	  This change causes that flag to be stripped so the Asterisk build is not
	  broken by those libraries.  This change is made for both pkgconfig and
	  tool based libraries.

	  ASTERISK-27629 #close

	  Change-Id: I13389613b194abbac77becf90cd950dc168704db

2018-04-03 14:39 +0000 [66f13ed694]  Corey Farrell <git@cfware.com>

	* Build System: Fixes for configure script.

	  * Replace all 'else if' statements with 'elif'.
	  * Use loop to detect versioned lua headers and libraries.

	  The loop for detecting lua fixes a bug where LUA_INCLUDE would be
	  appended with the directory of every lua version after the first one is
	  found.

	  Change-Id: I3276f9aee955014108345be6092f51c932b43a0f

2018-04-02 08:53 +0000 [0f6431e8e4]  Joshua Colp <jcolp@digium.com>

	* app_confbridge / bridge_softmix: Add ability to configure REMB interval.

	  This change adds a configuration option to app_confbridge which can be
	  used to set the interval at which we will send a combined REMB (remote
	  estimated maximum bitrate) frame to sources of video. The bridging API
	  has also been extended slightly to allow setting this so bridge_softmix
	  can use it.

	  ASTERISK-27786

	  Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82

2018-01-02 07:54 +0000 [f91263cf46]  George Joseph <gjoseph@digium.com>

	* res_pjsip:  Correct usages of pjproject's timer heap

	  Fix some timer heap initializations and cancels to try and prevent
	  crashes and timer heap issues.

	  Change-Id: I64885d190fa22097d1b55987091375541e57a7ee

2018-03-25 13:35 +0000 [48720e7def]  George Joseph <gjoseph@digium.com>

	* pjroject_bundled:  Add already-destroyed check to tsx_timer_callback

	  There have been cases that when the transaction timer callback is called
	  the tsx is already destroyed.  This causes a crash.  We now check the
	  tsx state and return if the tsx is already destroyed.

	  Change-Id: If93acd5e48d9ca5bb553f2405d5afc836842fe1c

2018-03-25 13:25 +0000 [7c03b2713e]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled: timer: Clean up usage of timer heap

	  Added a new pj_timer_entry_reset function that resets a timer_entry
	  for re-use.

	  Changed direct settings of timer_entry fields to use
	  pj_timer_entry_init and pj_timer_entry_reset.

	  Fixed issues where timers were being rescheduled incorrectly.

	  Change-Id: I5b624bfbc5c1429117484b9b24567293002148e6

2018-03-29 17:07 +0000 [97cc67b12f]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix deadlock on reliable transport shutdown.

	  A deadlock can happen when the PJSIP monitor thread is shutting down a
	  connection oriented transport (TCP/TLS) used by a subscription at the same
	  time as another thread tries to send something for that subscription.  The
	  deadlock is between the pjsip monitor thread attempting to get the dialog
	  lock and another thread sending something for that dialog when it tries to
	  get the transport manager lock.

	  * res_pjsip_pubsub.c: Avoid the deadlock by pushing the subscription
	  removal to the subscription serializer.

	  * res_pjsip_registrar.c: Pushed off incoming registration contact removals
	  to a default serializer as a precaution.  Removing the contacts involves
	  sorcery access which in this case will involve database access.  Depending
	  upon the setup, the database may not be on the same machine and could take
	  awhile.  We don't want to hold up the pjsip monitor thread with
	  potentially long access times.

	  ASTERISK-27706

	  Change-Id: I56b647aea565f24dba33e9e5ebeed4cd3f31f8c4

2018-03-07 06:15 +0000 [f65488f546]  Ross Beer <ross.beer@voicehost.co.uk>

	* pjsip_transport_events.c: Fix crash using stale transport pointer.

	  Apparently it is possible for the transport to be destroyed without
	  triggering the transport callback logic.  As a result the transport gets
	  destroyed and we have a stale pointer in the active_transports container.

	  * Invoke the transport monitor callback checks when the transport is
	  destroyed in addition to when it is disconnected and shutdown.

	  ASTERISK-27688

	  Change-Id: Ia9b5469fea8f2b3f2d8476fae6b748a4d23e7261

2018-03-19 09:36 +0000 [879743ab8f]  Ben Ford <bford@digium.com>

	* test_data_buffer.c: Add unit tests for data buffer API.

	  Added unit tests for the data buffer API. These tests include creating a
	  data buffer, putting payloads into the buffer, resizing the buffer, and
	  the nominal case for data buffer usage, which consists of adding
	  the max number of payloads to the buffer, checking to see if the correct
	  payloads are present, then adding more payloads and checking again to
	  see if the previous payloads were replaced or not.

	  For more information, refer to the wiki page:
	  https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements

	  Change-Id: Id5b599aa15a5e61d0ec080f97cd0c57bd07e6f8f

2018-02-23 13:49 +0000 [138e0eff4e]  Ben Ford <bford@digium.com>

	* Add data buffer API to store packets.

	  Adds a data buffer with a configurable size that can store different
	  kinds of packets (like RTP packets for retransmission). Given a number
	  it will store a data packet at that position relative to the others.
	  Given a number it will retrieve the given data packet if it is present.
	  This is purposely a storage of arbitrary things so it can be used not
	  just for RTP packets but also Asterisk frames in the future if needed.
	  The API does not internally use a lock, so it will be up to the user of
	  the API to properly protect the data buffer.

	  For more information, refer to the wiki page:
	  https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements

	  Change-Id: Iff13c5d4795d52356959fe2a57360cd57dfade07

2018-03-25 13:12 +0000 [a87141ddfd]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Add patch for pj_atomic crashes

	  There have been some crashes in the past where something attempts
	  to use a pj_atomic after it's already been destroyed.  This patch
	  tries to prevent it by making sure that pj_atomic_destroy sets
	  its mutex to NULL when it's done.  The pj_mutex functions already check
	  for a NULL mutex and just return PJ_EINVAL.

	  Teluu also added some checks to the win32 implementation as well.

	  Change-Id: Id25f70b79fdedf44ead6e6e1763a4417d3b3f825

2018-03-21 08:52 +0000 [e14b0e960d]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Add support for raising additional RTCP messages.

	  This change extends the existing AST_FRAME_RTCP frame type to be
	  able to contain additional RTCP message types, such as feedback
	  messages. The payload type is contained in the subclass which allows
	  knowing what is in the frame itself.

	  The RTCP feedback message type is now handled and REMB[1] messages
	  are raised with their containing information.

	  This also fixes a bug where all feedback messages were triggering
	  video updates instead of just FIR and FUR.

	  Finally RTCP frames are now passed up through the Asterisk core to
	  what is handling the channel, mapped appropriately in the case of
	  bridging, and written to an outgoing stream. Since RTCP frames are
	  on a per-stream basis this is only done on multistream capable
	  channels.

	  [1] https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03

	  ASTERISK-27758
	  ASTERISK-26366

	  Change-Id: I680da0ad8d5059d5e9655d896fb9d92e9da8491e

2018-03-27 08:27 +0000 [455cee99ae]  Florian Floimair <f.floimair@commend.com>

	* main: Update copyright notice with year 2018

	  Change-Id: I2d80bc5edf940fab914cba3d8a0fa0b5eb2a3148

2018-03-26 07:42 +0000 [48190c7f93]  Guido Falsi <madpilot@freebsd.org>

	* core: fix getopt(3) usage

	  Setting optind = 0 is forced to 1 in glibc implementation, but
	  causes option parsing to be flawed in other implementations, for
	  example on FreeBSD.

	  ASTERISK-27773 #close

	  Change-Id: Ia548e69f8302e9754dbbedb6bc451c0700c66f61

2018-03-23 13:15 +0000 [07cf6b1437]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Add Slackware (somehow).

	  ASTERISK-27770

	  Change-Id: Ib87e0483c785542238cfe34c1e884d5a31edfaab

2018-03-23 09:13 +0000 [307a295d00]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Add Gentoo Linux.

	  ASTERISK-27769

	  Change-Id: Ieb13293cd67481f3a33f58f6f7c8c3ee1e338e7a

2018-03-17 01:02 +0000 [318bf45928]  Corey Farrell <git@cfware.com>

	* main/indications: Use ast_cli_completion_add for all completions.

	  Change-Id: I371be01f178fb542a9fbe8d97e7ae21aa4d82c36

2018-03-21 14:54 +0000 [75715b95b4]  Russell Bryant <russell@russellbryant.net>

	* app_originate: Add async option.

	  Add an option to make app_originate not wait for the created channel
	  to answer.

	  Change-Id: I7fc2facd77079abc6321f44e8bcd4e39298de2ae
	  Requested-by: Frederic Steinfels <fst@highdefinition.ch>
	  Signed-off-by: Russell Bryant <russell@russellbryant.net>

2018-03-22 07:27 +0000 [4f33f56a72]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: pjsip_evsub_set_uas_timeout was not used (part 2).

	  The previous change was not complete.

	  ASTERISK-27435

	  Change-Id: I11082c14c0ef9c6af8c995084a6851337ea2a90f

2018-03-22 05:43 +0000 [d6fda173a4]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: With external editline, do not require libs for internal editline.

	  ASTERISK-27761

	  Change-Id: Ib17a7415297a210cfcdbf149e4df9b6edadbfab6

2018-03-21 22:00 +0000 [a6d58c518a]  Corey Farrell <git@cfware.com>

	* core: Create main/options.c.

	  This creates a separate source to 'own' symbols related to options.h and
	  paths.h.  This significantly reduces the number of exports created by
	  main/asterisk.o.  This change is required to eventually be able to
	  link unmodified Asterisk sources to utilities and/or stand-alone tests.

	  ASTERISK~26245

	  Change-Id: I5cf184f4757f9363b80c9e678bdc35c477122380

2018-03-21 19:25 +0000 [745b5134cd]  George Joseph <gjoseph@digium.com>

	* Revert "BuildSystem: In NetBSD, the Python Programming Language is python-X.Y."

	  Something is causing a python2/python3 mismatch on Fedora27.

	  PYTHON='/usr/bin/python2'
	  PYTHONDEV_CFLAGS='-I/usr/include/python3.6m '
	  PYTHONDEV_INCLUDE='-I/usr/include/python3.6m '
	  PYTHONDEV_LIB='-lpython3.6m '
	  PYTHONDEV_LIBS='-lpython3.6m '

	  This reverts commit be0e9920b64e3b07501b299d131309b58f9b0ddf.

	  Change-Id: I86dd102eb3ead199fe89178cdbadb36b4e2cfd1b

2018-02-08 13:23 +0000 [411915af28]  Corey Farrell <git@cfware.com>

	* loader: Reserve space for additional pointers in ast_module_info.

	  This creates 4 reserved pointers in case we need additional dependency
	  management fields.

	  Change-Id: If991ec99b779df1b2dfbd38ce1a0cd79f9e01821

2018-03-20 15:28 +0000 [cf73a4203f]  Kevin Harwell <kharwell@digium.com>

	* bridge_softmix: Clear "talking" when a channel is put on hold

	  This patch clears the talking flag from the channel (if already set), and
	  notifies listeners when that channel is put on hold. Note however, if the
	  endpoint continues to send audio frames and these are received by the bridge
	  then that channel will be put back into a "talking" state even though they
	  are on hold.

	  ASTERISK-27755 #close

	  Change-Id: I930e16c4662810f9f02043d69062f88173c5e2ef

2018-03-20 11:53 +0000 [bfefde5b07]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: For consistency, avoid extra libs to be empty.

	  AST_EXT_LIB_CHECK has several optional parameters. When an optional parameter
	  is left empty, [] is used to indicate this. However, this is done in the script
	  ./configure only then, when a further parameter is not empty. For example, when
	  no extra libraries are needed to test the checked library, parameter 5 is not
	  mentioned. Except parameter 6 and higher are used, then parameter 5 must be
	  empty.

	  However, this general rule was broken
	  * four times for parameter 5 (extra libs) and
	  * three times for parameter 4 (header)
	  as found via the Regular Expression \[\]\). In case of parameter 5, all cases
	  were changed, because that happened for no reason. In case of parameter 4, an
	  [] improves readability actually. Therefore for parameter 4, the only case which
	  did not do it was changed. All this aims to create more consistency: Only do
	  something different if there is a reason to do so.

	  Change-Id: I037ef170cf1ad94497151a9ea5071a31c656cafe

2018-03-20 09:58 +0000 [8bd5980e14]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* func_channel: Delete dead CHANNEL_TRACE code

	  The functions behind the flag and the flag itself were removed
	  from Asterisk 12 as incompatible with the new architecture.

	  Change-Id: I058493ef7a53ee290fd225bbcbb07bf46b623ccf

2018-03-17 21:26 +0000 [040bb21771]  Corey Farrell <git@cfware.com>

	* core: Remove additional symbols.

	  Remove symbols that are depreacated and replaced:
	  * ast_channel_datastore_alloc
	  * ast_channel_datastore_free
	  * ast_channel_cmpwhentohangup
	  * ast_channel_setwhentohangup
	  * config_text_file_save
	  * devstate2str
	  * ast_device_state_changed
	  * ast_device_state_changed_literal
	  * ast_verbose_get_by_module

	  Remove unused symbols:
	  * channelreloadreason2txt (last used in Asterisk 12).

	  Remove unused ast_options flags:
	  * AST_OPT_FLAG_END_CDR_BEFORE_H_EXTEN / ast_opt_end_cdr_before_h_exten
	  * AST_OPT_FLAG_VERBOSE_MODULE / ast_opt_verb_module
	  * AST_OPT_FLAG_INITIATED_SECONDS

	  Change-Id: I841255995d195f8efc1ed47af9c7a2f131c08645

2018-03-17 20:03 +0000 [de77cf8698]  Corey Farrell <git@cfware.com>

	* core: Remove dead symbols from asterisk.exports.in.

	  * dahdi_chan_name
	  * dahdi_chan_name_len
	  * dahdi_chan_mode
	  * __manager_event
	  * dialed_interface_info

	  Added comment about __progname and environ being needed for FreeBSD to
	  prevent accidental removal in the future.

	  Change-Id: I3ae026bc541cd9cb572be2ffa95fc359547642b5

2018-03-17 01:39 +0000 [201762f161]  Corey Farrell <git@cfware.com>

	* named_acl: Use ast_cli_completion_add.

	  Change-Id: I317a82de976bbdbfe4352c243e32a7bb8f66c377

2018-03-17 01:58 +0000 [645203a422]  Corey Farrell <git@cfware.com>

	* main/sounds: Use ast_cli_completion_add.

	  Change-Id: I140e1137906bbfcdb61c0c6304159be459ad873e

2018-03-16 10:19 +0000 [5d097f8236]  George Joseph <gjoseph@digium.com>

	* channel.c:  Allow generic plc then channel formats are equal

	  If the two formats on a channel are equal, we don't transcode and since
	  the generic plc needs slin to work, it doesn't get invoked.

	  * A new configuration option "genericplc_on_equal_codecs" was added
	    to the "plc" section of codecs.conf to allow generic packet loss
	    concealment even if no transcoding was originally needed.
	    Transcoding via SLIN is forced in this case.

	  ASTERISK-27743

	  Change-Id: I0577026a179dea34232e63123254b4e0508378f4

2018-03-17 01:09 +0000 [8d01ec572d]  Corey Farrell <git@cfware.com>

	* manager: Use ast_cli_completion_add for completion generators.

	  Change-Id: I658141c6ec490a3e866b02d2afea757928ceaabf

2018-03-17 02:16 +0000 [2c1ad2f510]  Corey Farrell <git@cfware.com>

	* main/test: Use ast_cli_completion_add.

	  Change-Id: I5133ff2ba4e030f9733fb3d050c863d72a22ae6b

2018-03-18 10:16 +0000 [115939caeb]  Joshua Colp <jcolp@digium.com>

	* rtp: Add REMB RTP property and set it on PJSIP video RTP.

	  This change adds a property to RTP instances to indicate that
	  REMB support is enabled and that sending/receiving should be
	  passed through.

	  This also enables it on video RTP instances in PJSIP if
	  WebRTC support is enabled.

	  Finally the goog-remb extension is added to the SDP using
	  the rtcp-fb attribute to indicate our support for it.

	  Details about REMB can be found on the draft document for it:
	  https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03

	  Change-Id: I1902dda1c0882bd1a0d71b2f120684b44b97e789

2018-03-17 04:31 +0000 [8c25a72d57]  Corey Farrell <git@cfware.com>

	* main/bridge: Use ast_cli_completion_add.

	  Change-Id: I3775a696d6a57139fdf09651ecb786bcf1774509

2018-03-17 16:41 +0000 [5b40441197]  Corey Farrell <git@cfware.com>

	* core: Minor cleanup of ast_el_read_char.

	  * Define CHAR_T_LIBEDIT and CHAR_TO_LIBEDIT based on
	    HAVE_LIBEDIT_IS_UNICODE.  This avoids needing to repeatedly use
	    conditional blocks, eliminates having multiple function prototypes.
	  * Remove parenthesis from return values.
	  * Add missing code block brackets {}.
	  * Reduce use of 'else' conditional statements where possible.

	  Change-Id: I4315328ebea2f62641faf6881de2ac20a9f9d08e

2018-03-17 10:49 +0000 [e61b50b67a]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Check for header file of OGG.

	  Asterisk uses various symbols of the shared library libogg within the module
	  format_ogg_vorbis. However, the source code of that module did not include the
	  header file of libogg explicitly but implicitly. Because that header was not
	  included before Asterisk 14, the script ./configure was told not to check for
	  it.

	  Anyway, even Asterisk 13 LTS uses symbols of libogg. Therefore, that header
	  should be included explicitly. Therefore, ./configure should check for that
	  header.

	  Change-Id: I98c50d56311b68880d1084fcc62c35ab2f8692db

2018-03-09 06:26 +0000 [f697025ae5]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: When no download utility is available, display the explanation.

	  ./configure --with-pjproject-bundled
	  did not display an explanation, when no download utility like wget, curl, or
	  fetch was installed beforehand, although an explanation existed in code. This
	  happened because the code expected the variable DOWNLOAD_TO_STDOUT to be empty.
	  However, the script ./configure set that variable always.

	  Change-Id: I64c99b76a03525c69471e5055bf124b36a51bbd4

2018-03-17 05:00 +0000 [10a978829e]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Remove unused dependency on libltdl.

	  Asterisk does not need the development package of libltdl, because it does not
	  use any symbol of -lltdl directly. Instead, it uses the runtime package via the
	  shared library -lodbc. On the supported platforms, that shared library declares
	  its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
	  failed.

	  ASTERISK-27745

	  Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba

2018-03-17 02:25 +0000 [1136a22a1e]  Corey Farrell <git@cfware.com>

	* main/translate: Use ast_cli_completion_add.

	  Change-Id: I0e2402660e54d91f74ab0804c62a5b1925577413

2018-03-17 02:00 +0000 [91ac95993e]  Corey Farrell <git@cfware.com>

	* main/taskprocessor: Use ast_cli_completion_add.

	  Change-Id: Ie5f812a988ed811fd11967151932de62bc131b48

2018-03-15 15:06 +0000 [3ad56aa929]  Corey Farrell <git@cfware.com>

	* main/config: Use ast_cli_completion_add for reload completion.

	  Change-Id: Ia3fa4c03f2285a1ec8814bbe7f4624ead9111ad1

2018-03-17 00:51 +0000 [9e335f22e7]  Corey Farrell <git@cfware.com>

	* aco: Use ast_cli_completion_add for 'config show help'.

	  In addition this removes:
	  * RAII_VAR usage
	  * Duplicate check of pos
	  * Unneeded arguments.

	  Change-Id: I2da8eac2670d1d8d6474c04037129804f55ebf39

2018-03-14 04:27 +0000 [4d1c9d8711]  Corey Farrell <git@cfware.com>

	* core: Stop using AST_INLINE_API for allocator functions.

	  This replaces AST_INLINE_API allocators in utils.h with real functions
	  implemented in astmm.c.  Associated macro's are also moved from utils.h
	  to astmm.h.

	  Remove menuselect conflicts between MALLOC_DEBUG and DEBUG_CHAOS as they
	  can now be combined.

	  This has multiple benefits:
	  * Simplifies asterisk/utils.h by removing inline functions and use of
	    the logger.
	  * Removal of these inline functions decreases size of Asterisk and
	    module binaries by 1% or more.
	  * Puts memory management functions together with and without
	    MALLOC_DEBUG enabled, simplifying management of the code.
	  * Enables DEBUG_CHAOS for ASTMM_REDIRECT and bundled pjproject.

	  Change-Id: If9df4377f74bdbb627461b27a473123e05525887

2018-02-27 03:01 +0000 [ecc846b26b]  Florian Floimair <f.floimair@commend.com>

	* app_dial: Enable early-media video

	  Certain applications (e.g. door-phone) require that also video is transmitted
	  before a call is accepted.

	  Change-Id: I9842e1dc2f6e1c2c49dc33fe615255007d2f821e

2018-03-05 06:50 +0000 [be0e9920b6]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: In NetBSD, the Python Programming Language is python-X.Y.

	  ASTERISK-27717

	  Change-Id: If90ddf9c396c32e7402a894f42dce215c30049d1

2018-03-16 09:53 +0000 [02fa145a1b]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid an extra case for OpenBSD.

	  Nine years ago with Mantis 13639 (now ASTERISK-12841) an extra case for OpenBSD
	  was introduced: Vorbis required Ogg to be specified manually, because the shared
	  library libvorbis.so did not specify its required dependency on -logg itself.

	  Today with OpenBSD 6.2, all libvorbis*.so declare their dependencies correctly.
	  Therefore, an extra case is not required anymore.

	  Change-Id: Ifd04e0994ce9f1e4ad29c3948a0398b91d1e97bc

2018-03-05 10:10 +0000 [00789174f6]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable Advanced Linux Sound Architecture (ALSA) in NetBSD.

	  In the script ./configure, AST_EXT_LIB_CHECK checks for external libraries. Some
	  libraries do not specify all their dependencies and require additional shared
	  libraries. In AST_EXT_LIB_CHECK, this is the fifth parameter. However, if a
	  library is specified there, it must exist on the platform, because ./configure
	  tries to compile/link/execute a small app using those statements. For example,
	  the library libdl.so is Linux specific and does not exist on BSD-like platforms.

	  Furthermore, no supported platform/version was found, which still (ever?)
	  requires those additional libraries. Therefore, they were simply removed.

	  Finally, this change adds the error code ESTRPIPE to the channel driver
	  chan_alsa for those platforms which lack it, again for example NetBSD.

	  ASTERISK-27720

	  Change-Id: I3b21f2135f6cbfac7590ccdc2df753257f426e0b

2018-03-16 09:02 +0000 [4d1e3fef6b]  George Joseph <gjoseph@digium.com>

	* app_voicemail:  Fix json blob errors

	  When app_voicemail calls ast_test_suite_notify with the results of
	  a user keypress, it formats the keypress as '%c'.  If the user hung up
	  or some other error occurrs, the result of the keypress is a non
	  printable character.  This ultimately causes json_vpack_ex to think
	  it's being passed a non utf-8 string and return an error.

	  * Keypress results passed to ast_test_suite_notify are now checked with
	    isprint() and a '?' is substituted if the check fails.

	  Change-Id: I78ee188916bbac840f3d03f40201b692347ea865

2018-03-15 09:32 +0000 [ebe957c5e9]  Corey Farrell <git@cfware.com>

	* main/cdr: Use ast_cli_completion_add for CDR channel completion.

	  Change-Id: Ie81830647a23aad61c1162583b6d50adbe6e7822

2018-03-12 10:20 +0000 [dbf5ff6ed0]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Add Arch Linux.

	  ASTERISK-27738

	  Change-Id: I7ca620e3c4dfb4b064a19382c4915aeb42a2a09f

2018-03-15 08:19 +0000 [89ba4d4e3d]  Corey Farrell <git@cfware.com>

	* main/ccss: Use ast_cli_completion_add for core id.

	  Change-Id: I44b25d6d24c7d9bc1bb38a50774b38883162f98f

2018-03-15 07:29 +0000 [aa0d95c730]  Corey Farrell <git@cfware.com>

	* astobj2_container: Use ast_cli_completion_add for container names.

	  Change-Id: I4f0fc09e820eb8d8da2354a177dbcf503c56ddd1

2017-12-09 04:52 +0000 [b929a7fb8d]  Corey Farrell <git@cfware.com>

	* main/channel: Use ast_cli_completion_add for channeltypes.

	  Change-Id: Ia845fae6a84801cc7d9996767b99efb2753cbb48

2018-03-14 12:38 +0000 [b45bb476bb]  Corey Farrell <git@cfware.com>

	* cli: Enable ast_cli_completion_add on public completion generators.

	  * ast_cli_complete
	  * ast_complete_channels
	  * ast_complete_applications

	  These generators will now use ast_cli_completion_add if state == -1.

	  Change-Id: I7ff311f0873099be0e43a3dc5415c0cd06d15756

2018-03-14 11:17 +0000 [92158b7f37]  Ross Beer <ross.beer@voicehost.co.uk>

	* res_pjsip_rfc3326.c: Account for more than one 'Reason' header

	  ASTERISK-27741

	  Change-Id: I0aa59a54735c6d20b95c54db1bd095dbf93e7adf

2018-03-12 08:05 +0000 [b0fff03bb5]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Add SUSE.

	  ASTERISK-27736

	  Change-Id: I4cafc8973349d50a7cb7919ddf0bb1aaef4bfc3e

2018-02-16 21:11 +0000 [572a508ef2]  Corey Farrell <git@cfware.com>

	* loader: Convert reload_classes to built-in modules.

	  * acl (named_acl.c)
	  * cdr
	  * cel
	  * ccss
	  * dnsmgr
	  * dsp
	  * enum
	  * extconfig (config.c)
	  * features
	  * http
	  * indications
	  * logger
	  * manager
	  * plc
	  * sounds
	  * udptl

	  These modules are now loaded at appropriate time by the module loader.
	  Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
	  the module loader will abort startup on failure of these modules.

	  Some of these modules are still initialized or shutdown from outside the
	  module loader.  logger.c is initialized very early and shutdown very
	  late, manager.c is initialized by the module loader but is shutdown by
	  the Asterisk core (too much uses it without holding references).

	  Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f

2018-03-13 16:39 +0000 [9e488dd482]  Corey Farrell <git@cfware.com>

	* core: Remove incorrect usage of attribute_malloc.

	  GCC documentation states that when __attribute__((malloc)) is used it
	  should not return storage which contains any valid pointers.  It
	  specifically mentions that realloc functions should not have the malloc
	  attribute, but this also means that complex initializers which could
	  contain initialized pointers should not use this attribute.

	  Change-Id: If507f33ffb3ca3b83b702196eb0e8215d27fc7d2

2018-03-12 05:19 +0000 [d9776870e8]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable IMAP storage on openSUSE and Arch Linux.

	  ASTERISK-27734

	  Change-Id: I8d6e6a1c08c031649764f5277fbbb85e57c3a9d4

2018-02-23 07:41 +0000 [ea9768ff07]  Corey Farrell <git@cfware.com>

	* stringfields: Remove MALLOC_DEBUG fields from struct ast_string_field_mgr.

	  This causes MALLOC_DEBUG reporting to be slightly different, calls which
	  cause additional memory pools to be allocated now report the callers
	  location rather than the location which originally allocated the
	  string field structure.  This reduces storage needed by string fields
	  and allows MALLOC_DEBUG to identify the source of additional allocations
	  rather than obscuring it by reporting the original allocation caller.

	  Change-Id: Idd18e6639a87ab862079b580c114d90361412289

2018-03-10 03:33 +0000 [fee929c8ac]  Corey Farrell <git@cfware.com>

	* core: Remove non-critical cleanup from startup aborts.

	  When built-in components of Asterisk fail to start they cause the
	  Asterisk startup to abort.  In these cases only the most critical
	  cleanup should be performed - closing databases and terminating
	  proceses.  These cleanups are registered using ast_register_atexit, all
	  other cleanups should not be run during startup abort.

	  The main reason for this change is that these cleanup procedures are
	  untestable from the partially initialized states, if they fail it could
	  prevent us from ever running the critical cleanup with ast_run_atexits.

	  Create separate initialization for dns_core.c to be run unconditionally
	  during startup instead of being initialized by the first dns resolver to
	  be registered. This ensures that 'sched' is initialized before it can be
	  potentially used.

	  Replace ast_register_atexit with ast_register_cleanup in media_cache.c.
	  There is no reason for this cleanup to happen unconditionally.

	  Change-Id: Iecc2df98008b21509925ff16740bd5fa29527db3

2018-03-12 06:40 +0000 [ea3b8bb080]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Update FreeBSD libraries.

	  Because the code review system Gerrit creates merge conflicts even when one line
	  apart another change happened, the previous update to the FreeBSD libraries had
	  to be rebased via Git. Because of a break for training of the original
	  contributor, this rebase was done by another contributor and the variant for
	  Asterisk 13 was cherry-picked to all branches. By this, dependencies for new
	  features added in newer Asterisk version got lost. This can be seen, when not
	  the original path set but a previous patch set is compared.

	  This change here fixes this by adding those (optional) dependencies for
	  Asterisk 15 and newer (again).

	  ASTERISK-27686

	  Change-Id: I6638a3d0dc37ad4ff5f94be15463e3dd8a2bfe74

2018-03-12 04:11 +0000 [9164be19d2]  Alexander Traud <pabstraud@compuserve.com>

	* res_srtp: Add support for libsrtp2.x on openSUSE.

	  Since ASTERISK-27253, no symbols from the header srtp2/crypto_types.h are used
	  anymore. Therefore, its include statement can be removed. This allows to compile
	  Asterisk on platforms which do not offer this private header, like openSUSE.

	  ASTERISK-27733

	  Change-Id: I25c5cb8fa966043d1506ebef449e5a724412b4b6

2018-03-08 09:14 +0000 [5b525c9781]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Add NetBSD.

	  Headers, libraries, and rpath.

	  ASTERISK-27728
	  ASTERISK-11015
	  Reported by: Curt Sampson

	  Change-Id: I50aa5fcd095937df32a2e33307caac7e79a8b5b7

2018-03-09 03:13 +0000 [c5f2332953]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: For consistency, avoid double-checking via if clauses.

	  In the script ./configure, AST_EXT_LIB_CHECK and AST_PKG_CONFIG_CHECK first test
	  whether parameter 1 was already found. Consequently, an if-test on PBX_ just a
	  line below is redundant, if exactly the same parameter 1 is used again.

	  No performance gain is expected by this change. However, because this strategy
	  is used all over in ./configure except for two places, this change aims to
	  create more consistency: Only do something different if there is a reason to do
	  so.

	  Change-Id: I4a6f48127b7af3a48168c917e888be1f70625027

2018-03-09 02:44 +0000 [36c8885c66]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable dladdr on non-Linux platforms like FreeBSD.

	  ASTERISK-27641

	  Change-Id: I587e8ba0123c70fc10cfd8b0ac3299551f61d84b

2018-03-08 13:53 +0000 [e6738b79b3]  Richard Mudgett <rmudgett@digium.com>

	* Complete deprecating legacy modules.

	  The menuselect comment was updated to deprecate these modules but the
	  AST_MODULE_INFO block at the end of file was missed.

	  ASTERISK-27671

	  Change-Id: I63070b5c4d4f08af010c6034acd4793c1bcef839

2018-03-07 13:50 +0000 [7f4354c10f]  Richard Mudgett <rmudgett@digium.com>

	* res_pjproject.c: Upgrade bundled PJPROJECT to 2.7.2

	  Update patches included in bundled PJPROJECT for the new version.

	  ASTERISK-27730

	  Change-Id: Id3c8c8ad82126846bcd9768bc3d0a18d89be8944

2018-03-08 12:02 +0000 [9ff95e46e3]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Add NetBSD.

	  ASTERISK-27729

	  Change-Id: I7a706d51375d54cf5e36d32397bfe09a48670804

2018-03-08 09:04 +0000 [75cebc3e71]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Re-check for another UUID library only when previous check failed.

	  As a side-effect, this avoids the ambiguous output:
	   checking for uuid_generate_random... no
	  which was printed always previously.

	  ASTERISK-25586
	  Reported by: John Nemeth

	  Change-Id: I6d541dfcf453932a9856c5e251aa22e0e6c233c9

2018-03-08 05:28 +0000 [fc64a0e2b3]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Instead of $PJPROJECT_LIBS with s, use $PJPROJECT_LIB everywhere.

	  In the script ./configure,
	  xyz_LIB  is set by AST_PKG_CONFIG_CHECK and
	  xyz_LIBS is set by PKG_CHECK_MODULES within
	  AST_PKG_CONFIG_CHECK. Both are the same. In Asterisk normally the former and
	  only three times the latter was used. Let us use xyz_LIB without s, for
	  consistency with AST_EXT_LIB_CHECK. That eases understanding because now readers
	  do not have to know that xyz_LIB equals xyz_LIBS.

	  Change-Id: I7359860a5d730cdc784c2c48e501a082196434d3

2018-03-06 06:28 +0000 [16f6e94033]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable PortAudio in NetBSD.

	  In NetBSD, PortAudio 1 is still the default version. PortAudio 2 can be
	  installed side by side but gets placed in a 'portaudio2' subdirectory. To
	  find PortAudio 2 even in a subdirectory, the tool pkg-config is queried via
	  AST_PKG_CONFIG_CHECK. For those platforms, which do not list PowerAudio 2
	  via pkg-config, the previous check remains and is executed thereafter.

	  ASTERISK-27721

	  Change-Id: I4175500126909ad1b181fff8e11bb4a3a6ae4fa9

2018-03-07 14:36 +0000 [c8a521b6c8]  Corey Farrell <git@cfware.com>

	* Replace direct checks of option_debug with DEBUG_ATLEAST macro.

	  Checking option_debug directly is incorrect as it ignores file/module
	  specific debug settings.  This system-wide change replaces nearly all
	  direct checks for option_debug with the DEBUG_ATLEAST macro.

	  Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0

2018-03-07 13:13 +0000 [1fe913f7bd]  Richard Mudgett <rmudgett@digium.com>

	* BuildSystem regression: Fix errors reported by clean targets.

	  Doing a 'make clean', 'make distclean', or 'make dist-clean' gets errors
	  about an invalid shell option: "/bin/sh: 0: Illegal option -".

	  The clean targets do not include the makeopts file which defines GREP and
	  LDCONFIG because the file may not exist and the distclean/dist-clean
	  targets will delete it anyway.

	  ASTERISK-27715

	  Change-Id: I33d40acdb03862bc89aeb6fb1ff497894a8ea7f5

2018-03-06 13:31 +0000 [88cef40f6e]  Ross Beer <ross.beer@voicehost.co.uk>

	* res_pjsip_rfc3326: Order of 'Reason' headers break many endpoints

	  ASTERISK-27554

	  Change-Id: If61c7faab7d2fa1031c056ed6268fe928e2391cf

2018-03-06 08:14 +0000 [961dd9fe52]  Sungtae Kim <pchero21@gmail.com>

	* voicemail: Fixed wrong voicemail message count

	  Fixed wrong voicemail mailbox reference for Action: VoicemailUsersList.

	  ASTERISK-27703

	  Change-Id: Ie6578ad80bba2bfaf34b84f0be978f59045ce6cd

2018-03-07 09:32 +0000 [58f44f225a]  Alexander Traud <pabstraud@compuserve.com>

	* utils: In Solaris, avoid a warning about an unused variable.

	  When HAVE_GETHOSTBYNAME_R_5 was set by the script ./configure, GCC 7.3.0 found
	  an unused variable. Actually, the variable was used (set to a dummy value) but
	  the compiler optimization might have removed that. Instead, this change ensures
	  that the variable 'res' is only used when it is really required.

	  Change-Id: Ic3ea23ccf84ac4bc2d501b514985b989030abab5

2018-03-07 01:45 +0000 [add03e207c]  Corey Farrell <git@cfware.com>

	* app_osplookup: Move header defines into the app.

	  astosp.h is leftover from when logic was split between app_osplookup and
	  res_osp.  All logic was moved into app_osplookup by 109737eb1c in 2006,
	  but astosp.h remained.  This moves the remaining defines into
	  app_osplookup and deletes astosp.h.

	  Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd

2018-02-14 07:33 +0000 [75a35ee5e8]  Jean Aunis <jean.aunis@prescom.fr>

	* chan_sip: Fix improper RTP framing on outgoing calls

	  The "ptime" SDP parameter received in a SIP response was not honoured.
	  Moreover, in the abscence of this "ptime" parameter, locally configured
	  framing was lost during response processing.

	  This patch systematically stores the framing information in the
	  ast_rtp_codecs structure, taking it from the response or from the
	  configuration as appropriate.

	  ASTERISK-27674

	  Change-Id: I828a6a98d27a45a8afd07236a2bd0aa3cbd3fb2c

2018-02-20 11:48 +0000 [3fb26df4ac]  lvl <digium@lvlconsultancy.nl>

	* res_pjsip_session: properly handle SDP from a forked call with early media

	  In handle_negotiated_sdp(), use session->active_media_state when
	  session->pending_media_state is empty.  The 200's SDP should be fed into
	  handle_negotiated_sdp_session_media() together with the already negotiated
	  state, which is now in session->active_media_state instead.  Only if both
	  the session's pending and active media are empty should
	  handle_negotiated_sdp() abort.

	  ASTERISK-27441

	  Change-Id: If0d5150ffe6f38d8a854831fef37942258d4629c

2018-03-05 08:01 +0000 [ef79e583ec]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable Lua in NetBSD.

	  luaL_openlib got removed with Lua 5.2.
	  luaL_newstate is available in all versions.

	  ASTERISK-27718

	  Change-Id: I9c8c8880315ee36ab740d7c40153306c0bfd6f71

2018-03-06 07:33 +0000 [162fc4fba6]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Depend not implicitly but explicitly on external libraries.

	  ASTERISK-27722

	  Change-Id: Ie7b8c30d86cb00a54d6ac4e09e6f28f42d2bd52c

2018-03-05 08:15 +0000 [99b6a14737]  Alexander Traud <pabstraud@compuserve.com>

	* res_http_post: Enable GMime in NetBSD.

	  ASTERISK-27719

	  Change-Id: I230c5f9f316b2e9465c093c13580f72ebbaf67a7

2018-03-05 04:16 +0000 [7e9734a858]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable autotools in NetBSD.

	  ASTERISK-27716

	  Change-Id: I52525e35e1620341272219911d054a1e3d3ec01e

2018-03-05 03:42 +0000 [b97905aaf2]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: AC_PATH_PROG sets to colon character when not found.

	  ASTERISK-27715
	  Reported by: Corey Farrell

	  Change-Id: I0d6d9572d1352dc7ad30c9917173f1e980d8c938

2018-03-03 09:06 +0000 [aabbb49e33]  Alexander Traud <pabstraud@compuserve.com>

	* chan_unistim: NetBSD has an incompatible struct in_pktinfo.

	  ASTERISK-27714
	  Reported by: John Nemeth

	  Change-Id: I1b84a89315a5f61222123d21bf35c59224da8990

2018-03-03 08:30 +0000 [5d19762b5f]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Cast any intptr_t explicitly to its proposed type.

	  ASTERISK-27713

	  Change-Id: I90c769e3c7f8c26de8a3af11335862cec15a1b22

2018-03-03 06:56 +0000 [9749524520]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Detect whether uselocale(.) is available.

	  ASTERISK-27712
	  Reported by: Joerg Sonnenberger, D'Arcy Cain

	  Change-Id: Idf1c9d43617a3e13028b95b313415903d80ef807

2018-03-03 03:53 +0000 [f7b845ff41]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid re-defining of pthread_* on NetBSD.

	  ASTERISK-27711

	  Change-Id: Idc9194035b2958b99f6b01eb5b438d45a074565b

2018-03-02 07:05 +0000 [313a9fe255]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Install init scripts on openSUSE Tumbleweed.

	  ASTERISK-27710

	  Change-Id: I4c777e41b31d4415bbe21cb435ad47b43ebb5467

2018-03-02 05:12 +0000 [a9c02e484a]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid == for comparison in ./configure.

	  ASTERISK-27709
	  Reported by: John Nemeth

	  Change-Id: I11b1ae8fd404c04066f1458f5d71f9536359d58d

2018-02-19 19:55 +0000 [c711e4076a]  Richard Mudgett <rmudgett@digium.com>

	* core: Remove ABI effects of MALLOC_DEBUG.

	  This allows asterisk to be compiled with MALLOC_DEBUG to load modules
	  built without MALLOC_DEBUG.  Now pre-compiled third-party modules will
	  still work regardless of MALLOC_DEBUG being enabled or not.

	  Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10

2018-02-27 15:40 +0000 [1a36a452bd]  Richard Mudgett <rmudgett@digium.com>

	* pjproject: Add cache_pools debugging option.

	  The pool cache gets in the way of finding use after free errors of memory
	  pool contents.  Tools like valgrind and MALLOC_DEBUG don't know when a
	  pool is released because it gets put into the cache instead of being
	  freed.

	  * Added the "cache_pools" option to pjproject.conf.  Disabling the option
	  helps track down pool content mismanagement when using valgrind or
	  MALLOC_DEBUG.  The cache gets in the way of determining if the pool
	  contents are used after free and who freed it.

	  To disable the pool caching simply disable the cache_pools option in
	  pjproject.conf and restart Asterisk.

	  Sample pjproject.conf setting:
	  [startup]
	  cache_pools=no

	  * Made current users of the caching pool factory initialization and
	  destruction calls call common routines to create and destroy cached pools.

	  ASTERISK-27704

	  Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828

2018-01-31 11:48 +0000 [eacee03f0e]  Corey Farrell <git@cfware.com>

	* gitreview: Reorder and add padding.

	  Change-Id: I459dc320a8c9452a01eed6f403d786741587c890

2018-02-23 21:24 +0000 [7b01236028]  Michael Cargile <mikec@vicidial.com>

	* apps/app_amd.c: Fixed total time and silence calculations

	  Between Asterisk 11 and Asterisk 13 there was a significant increase
	  in the number of AST_FRAME_NULL frames being processed by app_amd.c's
	  main loop. Each AST_FRAME_NULL frame was being counted as 100ms
	  towards the total time and silence. This may have been accurate
	  when app_amd.c was orginally added, but it is not in Asterisk 13.
	  As such the total analysis time and silence calculations were way
	  off effectively breaking app_amd.c

	  * Additional debug messages were added
	  * AST_FRAME_NULL are now ignored

	  ASTERISK-27610

	  Change-Id: I18aca01af98f87c1e168e6ae0d85c136d1df5ea9

2018-02-23 14:58 +0000 [7e2128c8e6]  George Joseph <gjoseph@digium.com>

	* ast_coredumper:  Minor fixes

	  * Fix --tarball-config so the option doesn't cause an error.

	  * Allow for missing /etc/os-release.

	  * Add a sleep between tarballing the coredump and removing the
	    output directory to allow the filesystem to settle.

	  Change-Id: I73e03b13087978bcc7f6bc9f45753990f82d9d77

2018-02-22 14:27 +0000 [0be1c388e4]  Ben Ford <bford@digium.com>

	* Add extended properties to rtp_engine for RTP retransmission support.

	  A couple of additional properties are needed in rtp_engine to enable
	  support for packet retransmission: AST_RTP_PROPERTY_RETRANS_RECV and
	  AST_RTP_PROPERTY_RETRANS_SEND. These will both be enabled automatically
	  if an endpoint has the webrtc option enabled. While this adds no
	  functionality currently, it will serve as a building block for future
	  changes for RTP retransmission support.

	  For more information, refer to the wiki page:
	  https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements

	  Change-Id: Ic598acd042a045f9d10e5bdccb66f4efc9e587cc

2018-02-23 10:09 +0000 [a7927471ad]  Corey Farrell <git@cfware.com>

	* core: Fix handling of maximum length lines in config files.

	  When a line is the maximum length "\n" is found at sizeof(buf) - 2 since
	  the last character is actually the null terminator.  In addition if a
	  line was exactly 8190 plus a multiple of 8192 characters long the config
	  parser would skip the following line.

	  Additionally fix comment in voicemail.conf sample config.  It previously
	  stated that emailbody can only contain up to 512 characters which is
	  always wrong.  The buffer is normally 8192 characters unless LOW_MEMORY
	  is enabled then it is 512 characters.  The updated comment states that
	  the line can be up to 8190 or 510 characters since the line feed and
	  NULL terminator each use a character.

	  ASTERISK-26688 #close

	  Change-Id: I80864a0d40d2e2d8cd79d72af52a8f0a3a99c015

2018-02-22 13:53 +0000 [bb9c1938a0]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_refer.c: Fix attended transfer race condition crash.

	  The transferrer's session channel was destroyed by the transferrer's
	  serializer thread in a race condition with the transfer target's
	  serializer thread during an attended transfer.  The transfer target's
	  serializer was attempting to clean up a deferred end status on behalf of
	  the transferrer's channel when it should have passed the action to the
	  transferrer's serializer.  When the transfer target's serializer lost the
	  race then both threads wind up trying to end the transferrer's session.

	  * Push the ast_sip_session_end_if_deferred() call onto the transferrer's
	  serializer to avoid a race condition that results in a crash.  The
	  session_end() function that could be called by
	  ast_sip_session_end_if_deferred() really must be executed by the
	  transferrer's serializer to avoid this kind of crash.

	  ASTERISK-27568

	  Change-Id: Iacda724e7cb24d7520e49b2fd7e504aa398d7238

2018-02-17 03:28 +0000 [c4c5d00528]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Update FreeBSD libraries.

	  deleted
	   autoconf gcc libsamplerate sqlite

	  changed
	   binutils to libbfd
	   freetds-devel to freetds
	   gmime2 to gmime26
	   mysql55-client to mysql57-client

	  added
	   alsa-lib bison bzip2 cclient corosync doxygen libedit flex graphviz
	   libhoard libical libilbc libltdl lua neon newt net-snmp
	   openldap-client openssl patch pkgconf portaudio postgresql10-client
	   python radcli speexdsp subversion uriparser xmlstarlet libzip

	  ASTERISK-27686

	  Change-Id: Ibe88c9b26e59c30d26cdb313a3ef01c9f37ac80d

2018-02-22 10:54 +0000 [50d9af101e]  Sean Bright <sean.bright@gmail.com>

	* func_audiohookinherit: Remove deprecated module.

	  Change-Id: Id52f719078a65c4b2eee7ab99d761eba6b6aed94

2018-02-21 12:52 +0000 [f083edc43c]  Richard Mudgett <rmudgett@digium.com>

	* manager.c: Fix lseek() parameter order.

	  ASTERISK-27659

	  Change-Id: I04a2705d2cb7df250769967bc59e2b397a49b797

2018-02-20 13:11 +0000 [39f733406d]  Richard Mudgett <rmudgett@digium.com>

	* bridge_simple.c: Fix stream topology handling.

	  The handling of stream topologies was not protected by channel locks in
	  simple_bridge_request_stream_topology_change().

	  * Fixed topology handling to be protected by channel locks where needed in
	  simple_bridge_request_stream_topology_change().

	  ASTERISK-27692

	  Change-Id: Ica5d78a6c7ecf4f0b95fb16de28d3889b32c4776

2018-02-05 16:46 +0000 [6436137959]  Sean Bright <sean.bright@gmail.com>

	* AST-2018-006: Properly handle WebSocket frames with 0 length payload.

	  In ast_websocket_read() we were not adequately checking that the
	  payload_len was non-zero before passing it to ws_safe_read(). Calling
	  ws_safe_read with a len argument of 0 will result in a busy loop until
	  the underlying socket is closed.

	  ASTERISK-27658 #close

	  Change-Id: I9d59f83bc563f711df1a6197c57de473f6b0663a

2018-01-31 13:37 +0000 [880c69f00f]  Kevin Harwell <kharwell@digium.com>

	* AST-2018-003: Crash with an invalid SDP fmtp attribute

	  pjproject's fmtp retrieval function failed to catch invalid fmtp attributes.
	  Because of this Asterisk would crash if given an SDP with an invalid fmtp
	  attribute.

	  When retrieving the format this patch now makes sure the fmtp attribute is
	  available. If not available it now returns an error status.

	  ASTERISK-27583 #close

	  Change-Id: I5cebe000ce2d846cae3af33b6d72c416e51caf2f

2018-01-31 13:33 +0000 [d3a398cf90]  Kevin Harwell <kharwell@digium.com>

	* AST-2018-002: Crash with an invalid SDP media format description

	  pjproject's media format parsing algorithm failed to catch invalid values.
	  Because of this Asterisk would crash if given an SDP with a invalid media
	  format description.

	  When parsing the media format description this patch now properly parses the
	  value and returns an error status if it can't successfully parse/convert the
	  value.

	  ASTERISK-27582 #close

	  Change-Id: I883b3a4ef85b6972397f7b56bf46c5779c55fdd6

2018-02-06 12:07 +0000 [758409de56]  George Joseph <gjoseph@digium.com>

	* AST-2018-005: res_pjsip_transport_management:  Move to core

	  Since res_pjsip_transport_management provides several attack
	  mitigation features, its functionality moved to res_pjsip and
	  this module has been removed.  This way the features will always
	  be available if res_pjsip is loaded.

	  ASTERISK-27618
	  Reported By: Sandro Gauci

	  Change-Id: I21a2d33d9dda001452ea040d350d7a075f9acf0d

2018-02-06 11:28 +0000 [de871515ba]  George Joseph <gjoseph@digium.com>

	* AST-2018-005: Fix tdata leaks when calling pjsip_endpt_send_response(2)

	  pjsip_distributor:
	     authenticate() creates a tdata and uses it to send a challenge or
	     failure response.  When pjsip_endpt_send_response2() succeeds, it
	     automatically decrements the tdata ref count but when it fails, it
	     doesn't.  Since we weren't checking for a return status, we weren't
	     decrementing the count ourselves on error and were therefore leaking
	     tdatas.

	  res_pjsip_session:
	     session_reinvite_on_rx_request wasn't decrementing the ref count
	     if an error happened while sending a 491 response.
	     pre_session_setup wasn't decrementing the ref count if
	     while sending an error after a pjsip_inv_verify_request failure.

	  res_pjsip:
	     ast_sip_send_response wasn't decrementing the ref count on error.

	  ASTERISK-27618
	  Reported By: Sandro Gauci

	  Change-Id: Iab33a6c7b6fba96148ed465b690ba8534ac961bf

2018-02-06 11:21 +0000 [c53d8dcb68]  George Joseph <gjoseph@digium.com>

	* AST-2018-005: Add a check for NULL tdata in ast_sip_failover_request

	  It was discovered that there are some corner cases where a pjsip tsx
	  might have no last_tx so calling ast_sip_failover_request with
	  a NULL last_tx as its tdata would cause a crash.

	  ASTERISK-27618
	  Reported By:  Sandro Gauci

	  Change-Id: Ic2b63f6d4ae617c4c19dcdec2a7a6156b54fd15b

2018-02-07 08:09 +0000 [d424850d58]  Joshua Colp <jcolp@digium.com>

	* AST-2018-004: Restrict the number of Accept headers in a SUBSCRIBE.

	  When receiving a SUBSCRIBE request the Accept headers from it are
	  stored locally. This operation has a fixed limit of 32 Accept headers
	  but this limit was not enforced. As a result it was possible for
	  memory outside of the allocated space to get written to resulting
	  in a crash.

	  This change enforces the limit so only 32 Accept headers are
	  processed.

	  ASTERISK-27640
	  Reported By: Sandro Gauci

	  Change-Id: I99a814b10b554b13a6021ccf41111e5bc95e7301

2018-01-13 08:04 +0000 [e70c4ec84d]  Joshua Colp <jcolp@digium.com>

	* AST-2018-001: rtp / channel: Don't allow an unnegotiated format to be passed up.

	  When an RTP packet is received by an RTP engine it has to map the
	  payload into the Asterisk format. The code was incorrectly checking
	  our own static list for ALL payloads if it couldn't find a negotiated one.
	  This included dynamic payloads. If the payload mapped to a format
	  of a different type (for example receiving a video packet on an audio
	  RTP instance) then the core stream code could cause a crash if a legacy
	  channel driver was in use as no stream would be present.

	  To provide further protection the core stream code will no longer assume
	  that a video or audio frame will always have a stream for legacy channel
	  drivers. If no stream is present the frame is dropped.

	  ASTERISK-27488

	  Change-Id: I022556f524ad8379ee73f14037040af17ea3316a

2018-02-20 13:11 +0000 [e2f98fbd63]  Richard Mudgett <rmudgett@digium.com>

	* channel.c: Fix typo.

	  Change-Id: I4eeedf89085697e81c354eb92d546686c67b0b5b

2018-02-20 10:33 +0000 [259c80675e]  Joshua Colp <jcolp@digium.com>

	* chan_sip: Emit a second ringing event to ensure channel is found.

	  When constructing a dialog-info+xml NOTIFY message a ringing channel
	  is found if the state is ringing and further information is placed into
	  the message. Due to the migration to the Stasis message bus this did
	  not always work as expected.

	  This change raises a second ringing event in such a way to guarantee
	  that the event is received by chan_sip and another lookup is done to
	  find the ringing channel.

	  ASTERISK-24488

	  Change-Id: I547a458fc59721c918cb48be060cbfc3c88bcf9c

2018-02-20 04:31 +0000 [0ad13949c1]  Corey Farrell <git@cfware.com>

	* doc/lang/language-criteria.txt: Link to wiki.

	  This document is out of date and is superseded by content on the
	  Asterisk wiki.

	  ASTERISK-24386 #close

	  Change-Id: Idbf95b27b096c205251e1bbb560c79224ba81822

2018-02-19 04:21 +0000 [4b555d7147]  Thomas Guebels <tgu@escaux.com>

	* res_rtp_asterisk: Fix ICE candidate nomination

	  If the ICE role is not set right away, we might have a role conflict
	  that stays undetected and ICE finishing with successful tests and no
	  candidate nominated. This was introduced by ASTERISK-27088.

	  To avoid this, we set the role as soon as before but only if the ICE
	  state permits it: still checking and not yet nominating candidates or
	  completed.

	  ASTERISK-27646

	  Change-Id: I5dbc69ad63cacbb067922850fbb113d479bd729c

2018-02-18 10:27 +0000 [8b18247af6]  Sean Bright <sean.bright@gmail.com>

	* res_http_websocket: Don't leak memory on read failure

	  Change-Id: Ic449ea832bc81a1671c0e910c5fbe8c683e3da89

2018-02-19 03:57 +0000 [97c21e9cb3]  Corey Farrell <git@cfware.com>

	* core: Rename sounds_index.c to sounds.c.

	  This will make the source filename match the 'module reload sounds'
	  command.  This will allow conversion to a built-in module in Asterisk 16
	  without needing to redefine AST_MODULE.

	  Change-Id: Ifb8e489575b27eb33d8c0b6a531f266670557f6e

2018-02-19 02:49 +0000 [e03f0f9572]  Corey Farrell <git@cfware.com>

	* config: Fix locking for extconfig reload.

	  Expand locking to include full reload process for extconfig to ensure
	  nothing can read the config mappings between clearing and reloading.

	  Change-Id: I378316bad04f1b599ea82d0fef62b8978a644b92

2018-02-15 14:09 +0000 [e4a5c9ccf4]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_header_funcs: Various cleanups

	   * Prefer strcasecmp() over stricmp()
	   * Use a list with no lock since we never actually lock
	   * Minor cleanups to error messages

	  Change-Id: I8446f44795ee8f3072e1c1f9193c6912dfc0c42b

2018-02-17 08:49 +0000 [a70c92121d]  Alexander Traud <pabstraud@compuserve.com>

	* rtp_engine: Load format name / mime type in uppercase again.

	  This reverts a previous change partly.

	  ASTERISK-27689

	  Change-Id: Ia3d2f282db6995be8c1c253b5d52f6038761e8af

2018-02-16 17:58 +0000 [525c0251c0]  Corey Farrell <git@cfware.com>

	* BuildSystem: Use single bootstrap.sh for Asterisk and menuselect.

	  This causes the root bootstrap.sh script to generate configure scripts
	  for both Asterisk and menuselect.  This ensures that both configure
	  scripts are generated with the same version of autotools and avoids
	  situations where shared autoconf macros get modified without
	  regenerating the menuselect script.

	  Change-Id: I2bfd8537bbb63b3d46b11efabbb15eaaf9ef731a

2018-02-16 13:33 +0000 [65a4084060]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Endpoint destruction does not free DTLS configuration

	  ASTERISK-27679 #close
	  Reported by: Mak Dee

	  Change-Id: I89a2783a11be0763bf123d1619ed176b6225cf42

2018-02-16 12:42 +0000 [a7e7302ab6]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Update OpenBSD libraries.

	  deleted
	   jack sqlite

	  renamed
	   freetds-0.63p1-msdblib to freetds
	   mysql-client to mariadb-client

	  added
	   bison bzip2 c-client doxygen e2fsprogs graphviz gsm libical jansson libltdl
	   lua neon net-snmp libsrtp portaudio-svn postgresql-client python speexdsp
	   subversion uriparser xmlstarlet
	   fftw3 libsndfile

	  ASTERISK-27684

	  Change-Id: I26bdcb0a1d0e484a8dad1052da97f194aefd3370

2018-02-16 12:30 +0000 [14796f529e]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Allow newer autotools on OpenBSD.

	  ASTERISK-27683

	  Change-Id: I5ec9dafbb0c16b6f2740c641980bc2eaaf995624

2017-10-16 07:36 +0000 [976afd26ab]  Torrey Searle <torrey@voxbone.com>

	* contrib/script/sip_to_pjsip: add support for realtime

	  Add a new script that can read from legacy realtime peers & generate
	  an sql file for populating pjsip endpoints, identify, and aor records.

	  ASTERISK-27348 #close

	  Change-Id: Idd3d7968a3c9c3ee7936d21acbdaf001b429bf65

2018-02-16 07:52 +0000 [dda73c5018]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Fix a typo related to ./configure --prefix=<path> on OpenBSD.

	  Reported by: Stuart Henderson

	  Change-Id: Ieae8624f48b6ae78cf29930b9a45a3c842c7a764

2018-02-16 05:58 +0000 [5fd59014a5]  Alexander Traud <pabstraud@compuserve.com>

	* res_calendar: Specialized calendars depend on symbols of general calendar.

	  ASTERISK-27680

	  Change-Id: Ifb77912e424fe3710a025c18526fada673ec0b79

2018-02-16 06:41 +0000 [c674efa996]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable IMAP storage on OpenBSD.

	  ASTERISK-27681
	  Reported by: Stuart Henderson

	  Change-Id: Ifb6b614acb251b695b9417d76510e73eb335b679

2018-02-16 04:50 +0000 [2c814afb86]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable system provided libedit on OpenBSD.

	  ASTERISK-27677

	  Change-Id: I0854e3616d1361ae9b6907d3d3444a02784ac62b

2018-02-15 14:30 +0000 [af2dd3a678]  Sean Bright <sean.bright@gmail.com>

	* bridge_roles: Use a non-locking linked list where appropriate

	  Also explicitly initialize with the AST_LIST_HEAD_NOLOCK_INIT macro for
	  clarity.

	  Change-Id: I4bc39ec33bc3ff77e1a971a01ace87deb965be3f

2018-02-15 13:29 +0000 [303e43f8a6]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Use pjsip_sip_uri.user_param instead of other_param

	  There is a dedicated slot in the pjsip_sip_uri for the 'user'
	  parameter, so use that instead of adding to the list of generic URI
	  parameters.

	  Change-Id: I0a0ce8a60ecee27489735bf56fd707719d8c2ed6

2018-02-12 07:37 +0000 [8ac198aff3]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Remove chan_h323 leftovers.

	  ASTERISK-27670

	  Change-Id: I07a8ef8bbd6001e25711fa1bff152eb6c9efa729

2018-01-17 08:17 +0000 [6b6b3ffa5b]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Invoke ldconfig with previous path.

	  On OpenBSD, gmake uninstall{-all} registered only libraries from /usr/lib and
	  lost those from /usr/local/lib. Instead, invoke ldconfig on a path.

	  ASTERISK-27595

	  Change-Id: I4aa2c0b5e07119d1a556f8ff6349eaf09e986888

2017-12-22 15:27 +0000 [9f74afbdcf]  Corey Farrell <git@cfware.com>

	* Deprecate legacy modules.

	  * app_fax (replaced by res_fax).
	  * res_config_sqlite (replaced by res_config_sqlite3).
	  * res_monitor (replaced by app_mixmonitor).

	  This is related to ASTERISK~23657 but does not resolve that ticket.
	  Resolving that ticket would require complete removal of res_monitor.

	  ASTERISK-27671 #close

	  Change-Id: I16a3edd61fc1abd4a7b2e9357693ed663f62dd49

2018-01-28 03:02 +0000 [f9ba31bb21]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Do not warn when bash is not installed.

	  ASTERISK-27631

	  Change-Id: Iefdf268b0b98c3e7d8089ba87cf78136ac1d785b

2018-02-12 22:15 +0000 [9e45d3f893]  Corey Farrell <git@cfware.com>

	* main/asterisk.c: Remove silly usage of RAII_VAR.

	  Change-Id: I7e2996397fbd3c3a6a69dd805c38448ddfc34ae9

2017-12-25 19:32 +0000 [02ee296f81]  Corey Farrell <git@cfware.com>

	* optional_api: Refactor to use vector's and standard allocators.

	  * Replace ad-hoc array management with macro's from vector.h.
	  * Remove redundent logger messages.
	  * Use normal Asterisk allocators instead of directly using libc
	    allocators.
	  * Free memory when an API has no implementation or users.

	  Change-Id: Ic6ecb31798d4a78e7df39ece86a68b60eac05bf5

2018-02-11 15:27 +0000 [8372138cce]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix crash processing CANCEL.

	  Check if initreq data string exists before using it when processing a
	  CANCEL request.

	  ASTERISK-27666

	  Change-Id: Id1d0f0fa4ec94e81b332b2973d93e5a14bb4cc97

2018-02-06 14:27 +0000 [cb4cfb8c43]  Sungtae Kim <pchero21@gmail.com>

	* manager: Add AMI event Load/Unload

	  Add an AMI events Load and Unload for notify when the
	  module has been loaded and unloaded.

	  ASTERISK-27661

	  Change-Id: Ib916c41eddd63651952998f2f49c57c42ef87a64

2018-01-30 20:31 +0000 [04490fb1d8]  Corey Farrell <git@cfware.com>

	* json: Add conditionals to avoid locking if Jansson is thread safe.

	  Jansson is thread safe for all read-only functions and reference
	  counting starting v2.11.  This allows simplification of our code and
	  removal of locking around reference counting and dumping.

	  Change-Id: Id985cb3ffa6681f9ac765642e20fcd187bd4aeee

2018-02-12 06:16 +0000 [b21915bd1c]  Alexander Traud <pabstraud@compuserve.com>

	* pjproject_bundled: Disable G.729 from Belledonne Communications.

	  When <http://github.com/BelledonneCommunications/bcg729> is installed, PJProject
	  tries to link that. Support for this bcg729 was added with PJProject 2.7. The
	  issue happens, because Teluu enabled that new feature on default.

	  ASTERISK-27584
	  Reported by: Stuart Henderson

	  Change-Id: I88b6b18ad777bcfe2d8201187b4b90eec0a172a6

2018-02-12 05:38 +0000 [97f45d5816]  Alexander Traud <pabstraud@compuserve.com>

	* codecs: Add support for WebRTC iLBC 2.0.

	  When the latest version of that library was installed, Asterisk did not build.

	  ASTERISK-27669
	  Reported by: Николай Михо

	  Change-Id: I27e09bb875fdd56423bd9fae1be85fddb428eb96

2018-02-12 01:26 +0000 [9fddc8b4dc]  Corey Farrell <git@cfware.com>

	* core: Remove embedded editline.

	  This removes the embedded copy of editline from the Asterisk source
	  tree, making a system copy of libedit mandatory in Asterisk 16+.

	  ASTERISK-27634 #close

	  Change-Id: Iedb64ad92acb78419f3caefedaa2bb7cd2a1a33f

2018-01-30 09:58 +0000 [32e610d9e6]  Alexander Traud <pabstraud@compuserve.com>

	* backtrace: Avoid potential spurious output.

	  clang 4.0 found this via -Wlogical-not-parentheses.

	  ASTERISK-27642

	  Change-Id: I9ec3e144d425a976c02811bd23cd0c533d2eca4e

2018-02-10 05:39 +0000 [971378bbdb]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Update Debian/Ubuntu libraries.

	  ASTERISK-27555

	  Change-Id: Idc36e91db30c0163c560d04c5a82bca5d6ce92a8

2018-02-09 12:06 +0000 [b2fcb30d38]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Fix runtime leak of CDR records.

	  Need to remove all CDR's listed by a CDR object from the active_cdrs_all
	  container including the root/master record.

	  ASTERISK-27656

	  Change-Id: I48b4970663fea98baa262593d2204ef304aaf80e

2018-01-31 17:48 +0000 [67cd90f10d]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: ConfbridgeList event has standard channel shapshot headers.

	  * Made the AMI ConfbridgeList action's ConfbridgeList events output all
	  the standard channel snapshot headers instead of a few hand-coded channel
	  snapshot headers.  The benefit is that the CallerIDName gets disruptive
	  characters like CR, LF, Tab, and a few others escaped.  However, an empty
	  CallerIDName is now output as "<unknown>" instead of "<no name>".

	  ASTERISK-27651

	  Change-Id: Iaf7d54a9d40194c2db060bc9b4979fab6720d977

2018-01-31 15:45 +0000 [f4b161440b]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Add the Muted header to ConfbridgeJoin AMI event.

	  ASTERISK-27651

	  Change-Id: Idef2ca54d242d1b894efd3fc7b360bc6fd5bdc34

2017-12-19 02:52 +0000 [5b8fea93d1]  Oron Peled <oron.peled@xorcom.com>

	* chan_console: don't read and write at the same time

	  It seems that the ALSA backend of PortAudio doesn't know how to both
	  read and write at the same time by adding a per-device mutex.

	  FIXME: currently only a draft version. Need to either auto-detect
	  we work with the ALSA backend or add an extra configuration option
	  to use this mutex.

	  ASTERISK-27426 #close

	  Change-Id: I635eacee45f5413faa18f5a3b606af03b926dacb

2018-02-02 17:35 +0000 [1017db107c]  Richard Mudgett <rmudgett@digium.com>

	* endpoint identifiers: Some code cleanup.

	  res_pjsip_endpoint_identifier_user.c:
	  * Fix copy/paste error in find_endpoint().  We were using a constant
	  "anonymous" string instead of the passed in endpoint_name when checking
	  the transport domain for an endpoint match.
	  * Eliminate RAII_VAR in find_endpoint().
	  * Remove always true check in find_transport_state_in_use().
	  * Remove useless CMD_STOP in find_transport_state_in_use().

	  res_pjsip_endpoint_identifier_anonymous.c:
	  * Eliminate RAII_VAR in anonymous_identify().
	  * Remove always true check in find_transport_state_in_use().
	  * Remove useless CMD_STOP in find_transport_state_in_use().

	  Change-Id: I86924c31db5bd225ca0c1219c761b668c6f91189

2018-02-02 17:20 +0000 [b71e469d68]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip/config_domain_aliases.c: Add check for missing domain.

	  What is the point of defining an alias and not saying what is being
	  aliased?

	  Change-Id: I98a892016ed61dcf5efeb6619fd748925103f0be

2018-02-02 15:11 +0000 [0960de71ae]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Fix documentation typos.

	  Change-Id: I82ae0b92bfa2ece84a5c684efd9eefdc83ebd068

2018-02-02 15:43 +0000 [bef49d90c1]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_realtime.c: Fix ref leak if object failed to apply.

	  Change-Id: I3c7106ff77009754725cee790eadf5da44154ab6

2018-01-24 19:58 +0000 [7e32adf044]  Sungtae Kim <pchero21@gmail.com>

	* manager.c: Fixed "(null):" header in AMI AsyncAGIEnd event

	  * Changed to create ami_event string only when the given blob is not
	  json_null().
	  * Fixed bad expression.

	  ASTERISK-27621

	  Change-Id: Ice58c16361f9d9e8648261c9ed5d6c8245fb0d8f

2018-02-01 13:01 +0000 [73f92c2c52]  Joshua Elson <joshelson@gmail.com>

	* res_pjsip_mwi.c: Fix null pointer crash

	  ASTERISK-27652 #close

	  Change-Id: I78a0d38bfd8d0d82830f3d53da04872d6b67284d

2018-02-01 15:03 +0000 [fc98843d4b]  Sean Bright <sean.bright@gmail.com>

	* appdocsxml.xslt: Add Language to channel snapshot transformation

	  Change-Id: I8f494b0c895a69b8bc94656d0c6ceebecb0394d8

2018-01-31 15:40 +0000 [3419a048b9]  Richard Mudgett <rmudgett@digium.com>

	* manager.c: Fix potential memory leak and corruption.

	  ast_str_append_event_header() could potentially leak and corrupt memory if
	  the ast_str needed to expand to add the AMI event header.

	  * Fixed to return error if the ast_str_append() failed.

	  Change-Id: I92f36b855540743b208d76e274152ee2d758176d

2018-01-31 17:27 +0000 [bcfe172f8d]  Richard Mudgett <rmudgett@digium.com>

	* manager_channels.c: Reordered ast_manager_build_channel_state_string_prefix()

	  * Made not allocate memory if the channel snapshot is an internal channel.

	  * Free memory earlier when no longer needed.

	  Change-Id: Ia06e0c065f1bd095781aa3f4a626d58fa4d28b38

2018-01-31 12:44 +0000 [4e4428ef3c]  Corey Farrell <git@cfware.com>

	* res_pjsip_registrar_expire: Delete empty module.

	  Verified nothing in the testsuite lists this module as a dependency.

	  Change-Id: I90c7d52c7e15e85fde3389d5eaccb05b97848813

2018-01-30 19:22 +0000 [1ccac0be0e]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c: Report not talking immediately when muted.

	  Currently in app_confbridge if someone mutes a channel while that channel
	  is talking, the talk detection code is suspended while the channel is
	  muted.  As far an an external observer is concerned, the muted channel's
	  talk status is still "talking" even though the channel is not contributing
	  audio to the conference bridge.  When the channel is later unmuted, it
	  takes the usual 'dsp_silence_threshold' option time to clear the talking
	  status even though the channel may have stopped talking while the channel
	  was muted.

	  * In bridge_softmix.c, clear the talking status and report talking stopped
	  if the channel was talking when the channel is muted.  When the channel is
	  unmuted and the channel is still talking then report the channel as
	  talking since it is contributing audio to the bridge again.

	  ASTERISK-27647

	  Change-Id: Ie4fdbc05a0bc7343c2972bab012e2567917b3d4e

2018-01-30 15:00 +0000 [b9024197ab]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Update dsp_silence_threshold and dsp_talking_threshold docs.

	  The dsp_talking_threshold does not represent time in milliseconds.  It
	  represents the average magnitude per sample in the audio packets.  This is
	  what the DSP uses to determine if a packet is silence or talking/noise.

	  Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443

2018-01-31 11:00 +0000 [6c5e3226ec]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_registrar.c: Fix compiler error.

	  Need to include signal.h to define pthread_kill() and SIGURG.

	  Change-Id: I10ae3aa4bf8e7386ac29ade78c0f2caed8e674fa

2018-01-30 23:05 +0000 [60701b3252]  Corey Farrell <git@cfware.com>

	* res_pjsip_session: Prevent crash during shutdown.

	  pjproject does not have a function to reverse pjsip_inv_usage_init.
	  This means we need to ignore any calls to the functions once shutdown is
	  final.

	  ASTERISK-27571 #close

	  Change-Id: Ia550fcba563e2328f03162d79fb185f16b7c9b9d

2018-01-27 13:03 +0000 [720dbb5745]  Corey Farrell <git@cfware.com>

	* core: Create ast_atomic macro's.

	  Create ast_atomic macro's to provide a consistent interface to the
	  common functionality of __atomic and __sync built-in functions.

	  ASTERISK-27619

	  Change-Id: Ieba3f81832a0e25c5725ea067e5d6f742d33eb5b

2018-01-28 10:10 +0000 [2b9aa6b5bb]  George Joseph <gjoseph@digium.com>

	* res_pjsip_pubsub: Prune subs with reliable transports at startup

	  In an earlier release, inbound registrations on a reliable transport
	  were pruned on Asterisk restart since the TCP connection would have
	  been torn down and become unusable when Asterisk stopped.  This same
	  process is now also applied to inbound subscriptions.

	  Also fixed issues in res_pjsip_registrar where it wasn't handling the
	  monitoring correctly when multiple registrations came in over the same
	  transport.

	  To accomplish this, the pjsip_transport_event feature needed to
	  be refactored to allow multiple monitors (multiple subcriptions or
	  registrations from the same endpoint) to exist on the same transport.
	  Since this changed the API, any external modules that may have used the
	  transport monitor feature (highly unlikey) will need to be changed.

	  ASTERISK-27612
	  Reported by: Ross Beer

	  Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36

2018-01-29 13:46 +0000 [81db0aca0f]  George Joseph <gjoseph@digium.com>

	* res_pjsip_registrar_expire:  Refactor into res_pjsip_register

	  res_pjsip_registrar_expire remains as an empty module for now.

	  Change-Id: Ib93698938bae548d2199cb542f3692d1a171239f

2018-01-29 07:51 +0000 [cf21e9fc97]  Corey Farrell <git@cfware.com>

	* Sample modules.conf: comment out example load statement.

	  The sample modules.conf explicitly loaded res_musiconhold.so.  This is
	  redundent as autoload=yes is already set.  It causes warnings if
	  res_musiconhold.so was not installed and results in an unexpected load
	  if the admin disables autoload without remembering to remove the
	  res_musiconhold load statement.

	  Also remove reference to unknown module pbx_gtkconsole.

	  Change-Id: Ib01888994d9f1364b14d3c9fb6ff96774a6e580a

2018-01-29 10:20 +0000 [913773cd75]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Enable autotools in FreeBSD.

	  In the current versions of FreeBSD, the apps of GNU autotools do not need to
	  be called with a version anymore. The latest version can be invoked directly.
	  Additionally, the script ./bootstrap.sh asked for autoconf 2.62 and
	  automake 1.9, versions which are not available as port anymore.

	  ASTERISK-27637

	  Change-Id: Id7b94b80e78cc943a40ba79b697e3f70019820a7

2018-01-29 10:00 +0000 [156b12340e]  Alexander Traud <pabstraud@compuserve.com>

	* app_voicemail: Avoid always true when using pointer address.

	  clang 4.0 warned about this.

	  ASTERISK-27635

	  Change-Id: I213f230607d7fbe97c0f5f2d60da9cbf5a2d8231

2018-01-19 05:13 +0000 [e7f8ef1935]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Update RHEL/CentOS/Fedora libraries.

	  deleted
	   automake git ncurses-devel pjproject-devel sqlite2-devel libsqlite3x-devel

	  renamed
	   radiusclient-ng-devel to radcli-devel
	   gmime22-devel to gmime-dev

	  added
	   alsa-lib-devel bash binutils-devel bison doxygen flex hoard make pkgconfig
	   speexdsp-devel uriparser-devel uw-imap-devel wget xmlstarlet zlib-devel
	   codec2-devel fftw-devel libsndfile-devel unbound-devel

	  ASTERISK-27599
	  Reported by: Said Masoud

	  Change-Id: I05bb0af98ae532b2d5f37478e38b8f0762b1c035

2018-01-28 05:20 +0000 [aaf14670b5]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Remove unused variables.

	  Because of a copy-and-paste from the script build_tools/download_externals,
	  the script build_tools/list_valid_installed_externals got its local variables.
	  However in the latter, three variables were not used actually.

	  Change-Id: I252de5a98c17ea54459174875357c22c2eebe8d5

2018-01-25 12:06 +0000 [84a6365164]  Corey Farrell <git@cfware.com>

	* loader: Use ast_cli_completion_add for 'module load' completion.

	  This addresses all performance issues with 'module load' completion.  In
	  addition to using ast_cli_completion_add we stop using libedit's
	  filename_completion_function, instead using ast_file_read_dir.  This
	  ensures all results are produced from a single call to opendir.

	  Change-Id: I8bf51ffaa7ef1606f3bd1b5bb13f1905d72c6134

2018-01-27 09:44 +0000 [d9e42f27b9]  Alexander Traud <pabstraud@compuserve.com>

	* core: Fix unused variable error in handle_show_sysinfo.

	  The previous fix broke the case
	  HAVE_SYSINFO = no
	  HAVE_SYSCTL = yes
	  HAVE_SWAPCTL = no
	  which occurs on FreeBSD 11.1 for example.

	  ASTERISK-26563

	  Change-Id: If77c39bc75f0b83a6c8a24ecb2fa69be8846160a

2018-01-27 08:54 +0000 [3c26eec043]  Alexander Traud <pabstraud@compuserve.com>

	* editline: Avoid shifting a negative signed value.

	  clang 4.0 warned about this.

	  ASTERISK-27630

	  Change-Id: Ie2725048c661c1792d8b1d498575144350b6e9ba

2018-01-27 03:25 +0000 [c38da18ec6]  Alexander Traud <pabstraud@compuserve.com>

	* headers: Consistent use of typeof and/or __typeof__.

	  Because of a copy-and-paste error, the Asterisk project was using __typeof
	  instead of typeof. It works because typeof, __typeof, and __typeof__ are
	  supported by GCC, but here the escaped variant was not intended. Therefore,
	  for consistence, we change this to typeof.

	  Change-Id: I2a962c3e596e882f691a19345445b14571a5f07c

2018-01-24 18:25 +0000 [5d320d2d4b]  Richard Mudgett <rmudgett@digium.com>

	* Update sounds release to fix siren7 and siren14 files.

	  ASTERISK-16172

	  Change-Id: I2fb564258cd4db0f35952ad48b8687355c2dcad3

2018-01-15 11:08 +0000 [6da970bfb9]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Raise autoconf version requirement to 2.60a.

	  AC_COMPUTE_INT requires at least autoconf 2.60a.

	  This affects only those who contribute to Asterisk, only those who had to use
	  the script ./bootstrap.sh. Furthermore, this change just makes sure nobody is
	  using a too old autoconf.

	  ASTERISK-16951

	  Change-Id: Ibca850e2fe0e77d935207bd959bacf7197d7f637

2018-01-26 06:48 +0000 [0afff31ed0]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Download latest Jansson.

	  ASTERISK-27603

	  Change-Id: I65c587534c0ae364f063d68da1bed40bb3d5e8aa

2018-01-01 15:59 +0000 [39fcecad59]  Corey Farrell <git@cfware.com>

	* core: Tweak startup order.

	  Move initialization of units which do not require configuration to occur
	  before preload modules.  This leaves only units which load config between
	  module preload and regular load stages.

	  Change-Id: I1d15384acad16a22c3498124421af474fa517478

2018-01-25 01:37 +0000 [23381d2c5e]  Corey Farrell <git@cfware.com>

	* Build System: Require __sync or __atomic functions.

	  This change causes the configure script to throw an error if neither
	  __sync nor __atomic builtin functions are available.

	  ASTERISK-27619

	  Change-Id: Ie01a281e0f5c41dfeeb5f250c1ccea8752f56ef9

2018-01-24 22:44 +0000 [a164b7ccfb]  Corey Farrell <git@cfware.com>

	* loader: Correct overly strict startup checks.

	  The code which handled loading modules had too many situations which
	  would result in halting Asterisk startup.  Treat most errors as declines
	  instead of failures.  The exception is when the module load function
	  returns AST_MODULE_LOAD_FAILURE or an invalid code.

	  Clear the missingdeps vector when appropriate to ensure the next loop
	  starts clean.

	  ASTERISK-27620

	  Change-Id: I45547d9641fd45bd86d80250224417625631ad84

2018-01-24 18:49 +0000 [6fbd855228]  Corey Farrell <git@cfware.com>

	* Build System: Add support for __atomic built-in operators.

	  Add a check to configure.ac for __atomic_fetch_add support.  If found
	  use the __atomic built-in operators for ast_atomic_dec_and_test and
	  ast_atomic_fetchadd_int.

	  ASTERISK~27619

	  Change-Id: I65b4feb02bae368904ed0fb03f585c05f50a690e

2017-12-29 02:57 +0000 [527cf5a570]  Corey Farrell <git@cfware.com>

	* Remove redundant module checks and references.

	  This removes references that are no longer needed due to automatic
	  references created by module dependencies.

	  In addition this removes most calls to ast_module_check as they were
	  checking modules which are listed as dependencies.

	  Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e

2018-01-24 10:30 +0000 [b9e35bf6d3]  Richard Mudgett <rmudgett@digium.com>

	* CHANGES: Add AMI action 'PJSIPShowContacts' note.

	  ASTERISK-27581

	  Change-Id: If6af275764741a11030f0a4fd324fa29b376d74e

2018-01-14 12:33 +0000 [5b8e71ab9f]  Sungtae Kim <pchero21@gmail.com>

	* res_pjsip: Add AMI action 'PJSIPShowContacts'

	  Add an AMI action which provides information on all
	  configured Contacts.

	  ASTERISK-27581

	  Change-Id: I2eed42c74bbc725fad26b8b33b1a5b3161950c73

2018-01-18 20:19 +0000 [2f78dc2bfa]  Richard Mudgett <rmudgett@digium.com>

	* pbx_variables.c: Misc fixes in variable substitution.

	  * Copy more than one character at a time when there is nothing to
	  substitute.

	  * Fix off by one error if a '}' or ']' is missing.

	  * Eliminated the requirement that the "used" parameter had to point to a
	  variable.  The current callers were always declaring a variable to meet
	  the requirement and discarding the value put into that variable.  Now it
	  can be NULL.

	  * In ast_str_substitute_variables_full() fixed using the bogus channel to
	  evaluate a function.  We were not using the bogus channel we just created
	  to help evaluate a subexpression.

	  Change-Id: Ia83d99f4f16abe47f329eb39b6ff2013ae7c9854

2018-01-18 09:01 +0000 [679fa5fb34]  Corey Farrell <git@cfware.com>

	* Add missing OPTIONAL_API and ARI dependences.

	  I've audited all modules that include any header which includes
	  asterisk/optional_api.h.  All modules which use OPTIONAL_API now declare
	  those dependencies in AST_MODULE_INFO using requires or optional_modules
	  as appropriate.

	  In addition ARI dependency declarations have been reworked.  Instead of
	  declaring additional required modules in res/ari/resource_*.c we now add
	  them to an optional array "requiresModules" in api-docs for each module.
	  This allows the AST_MODULE_INFO dependencies to include those missing
	  modules.

	  Change-Id: Ia0c70571f5566784f63605e78e1ceccb4f79c606

2018-01-22 09:18 +0000 [140f937c7e]  Alexander Traud <pabstraud@compuserve.com>

	* res_config_mysql: Avoid the header mysql_version.h.

	  ASTERISK-27607

	  Change-Id: I23d00ded955c4afd5f2c3c9dc96dcb48b3f74eec

2018-01-05 14:46 +0000 [fd557ad041]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: For PJProject, point users to configure script.

	  The installation script and the new configure option --with-pjproject-bundled
	  aimed to accomplish the same. However, the installation script was out of
	  date. Users should go for the maintained configure option, or the Wiki.

	  ASTERISK-24598

	  Change-Id: Icbf4b562f81f7c05bd24a3805bd46c0beb4ebd44

2018-01-20 12:58 +0000 [d427bb84a2]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Remove AC_CONFIG_AUX_DIR.

	  ASTERISK-27602

	  Change-Id: I9f4d3d2bc1481748e39ad1e2b0a364d38e38978b

2018-01-19 12:21 +0000 [693e509566]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Remove orphaned .PHONY targets.

	  Change-Id: Ic44d75141b9bf99e7d72fcc82ee111b5cf6989d2

2018-01-19 12:14 +0000 [70137794e9]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Allow make clean all again.

	  ASTERISK-27600
	  Reported by: Hamid R. Hashmi

	  Change-Id: I683d14d024650be04074b037b6300464519409f4

2018-01-19 06:16 +0000 [93471373f6]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Update Debian/Ubuntu libraries.

	  ASTERISK-27555

	  Change-Id: Ieb41b0cbf968af12882b39454b819ebb48b9ea46

2018-01-19 04:46 +0000 [4c511c1a4d]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Support package manager DNF and yum option strict=1.

	  This re-enables the script ./contrib/scripts/install_prereq on Fedora 22 and
	  newer, and on RHEL/CentOS when the option strict=1 was set for yum install.

	  ASTERISK-27598
	  Reported by: Hunter Stevens, Said Masoud

	  Change-Id: I40f9517122aaa6906e8fc0962b4b8008dfddb368

2018-01-09 11:29 +0000 [77f2814d01]  Benoît Dereck-Tricot <benoit.dereck-tricot@eyepea.eu>

	* pbx: Reduce verbosity while loading extensions

	  Each time the dial plan is reloaded, a lot of logs like these are generated:
	  "Added extension 'XXXXX' priority 1 to YYYYYYYYYYY"
	  This patch changes the log level for those logs.

	  ASTERISK-27084

	  Change-Id: I5662902161c50890997ddc56835d4cafb456c529

2018-01-18 14:55 +0000 [5964061a21]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Document tlsv1_1 and tlsv1_2 methods

	  Change-Id: I67ed9039bf3f132fb20ee7a750e0aef0f704d7d3

2018-01-08 23:50 +0000 [33d5ab3e69]  Igor Goncharovsky <igor.goncharovsky@gmail.com>

	* chan_unistim: Fix hold function ability to lock/crash asterisk

	  This patch fix chan_unistim hold functions to correctly support
	  hold function in different states possible in case of multiple lines
	  established on the phone

	  ASTERISK-26596 #close

	  Change-Id: Ib1e04e482e7c8939607a42d7fddacc07e26e14d4

2017-10-29 22:00 +0000 [25cb1ab05b]  Corey Farrell <git@cfware.com>

	* loader: Add support for built-in modules.

	  * Add SRC_EMBEDDED variable to main/Makefile.  Built-in module sources
	    must be listed in this variable to ensure they get the correct CFLAGS.

	  Change-Id: I920852bc17513a9c2627061a4ad40511e3a20499

2017-12-09 00:03 +0000 [e6142a1282]  Corey Farrell <git@cfware.com>

	* loader: Rework load_resource_list.

	  Use a single loop in a loop to scan the resource list attempting to
	  dlopen each module.  The inner loop is repeated until it doesn't do any
	  work, then it is run one more time to allow printing of error messages.

	  Change-Id: I60c15cd57ff9680b62e2a94c7519401fa4a38e45

2017-12-08 23:30 +0000 [a80cbb046e]  Corey Farrell <git@cfware.com>

	* loader: Remove global symbol only startup phase.

	  Dependency loader is now in place so we no longer need a separate loader
	  phase for global symbols only.  This simplifies the loader and allows us
	  to minimize calls to dlopen.

	  Change-Id: I33e3174d67f3b4552d3d536326dcaf0ebabb097d

2017-11-21 23:39 +0000 [3b73ed28c5]  Corey Farrell <git@cfware.com>

	* loader: Process module dependencies.

	  * Add string vectors for requires, optional_apis and enhances.
	  * Add reffed_deps module vector for holding references to dependencies.
	  * Initialize string vectors after final dlopen of each module.
	  * Free string vectors and clear references from reffed_deps in
	    module_destroy.
	  * Create functions necessary to process module dependencies and enforce
	    load order.

	  Module dependencies result in automatic references being managed by the
	  module loader.  This enforces unload order.

	  Change-Id: I9be08d1dd331aceadc1dcba00b804d71360b2fbb

2017-12-27 17:44 +0000 [86b484dec7]  Graham Mainwaring <graham@mhn.org>

	* app_followme:  Add a prompt to be read when a call is connected

	  This patch adds the ability to configure a prompt which will be read
	  to the "winner" who pressed 1 (or the configured value) and received
	  the call.

	  ASTERISK-24372 #close

	  Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272

2018-01-17 00:28 +0000 [4fd303b630]  Corey Farrell <git@cfware.com>

	* loader: Miscellaneous fixes.

	  * Remove comment about lazy load.
	  * Improve message about module already being loaded and running.
	  * Handle allocation error in add_to_load_order.
	  * Dead code elimination from modules_shutdown.

	  Change-Id: I22261599c46d0f416e568910ec9502f45143197f

2018-01-17 08:36 +0000 [2a1b52cc67]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Use the detected name for MD5 everywhere.

	  Affacted the (automatic) download script for external modules:
	  ./build_tools/download_externals

	  ASTERISK-27596

	  Change-Id: If4c3176f7bf58df32fec6e02a659f1a78d57cf4b

2018-01-17 07:11 +0000 [4cd3f5c162]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Invoke install not in GNU but POSIX style.

	  ASTERISK-27594

	  Change-Id: Iaaa6a19d2fe031dffcba441d0502a7ea65c93cb3

2018-01-17 06:47 +0000 [7e7a20642c]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: In OpenBSD, xmlstarlet is xml.

	  ASTERISK-27593

	  Change-Id: I1c7087f7f7582e40b3312c690d912c9a86466805

2018-01-17 02:51 +0000 [8f31b70246]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Detect external library Lua in version 5.3.

	  On some platforms, you decide to go for one specific version of Lua, for
	  example in OpenBSD. On other platforms, you are able to install several versions
	  side-by-side, for example in Ubuntu and Fedora. Asterisk already works with
	  Lua 5.3. Asterisk failed to detect Lua 5.3 on those platforms which allow
	  several versions.

	  ASTERISK-27592

	  Change-Id: If7a4b395d844a464e9a1f4f626c5bff4ee67eed8

2017-12-22 19:50 +0000 [8494e78010]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Split type=identify to IP address and SIP header matching priorities

	  The type=identify endpoint identification method can match by IP address
	  and by SIP header.  However, the SIP header matching has limited
	  usefulness because you cannot specify the SIP header matching priority
	  relative to the IP address matching.  All the matching happens at the same
	  priority and the order of evaluating the identify sections is
	  indeterminate.  e.g., If you had two type=identify sections where one
	  matches by IP address for endpoint alice and the other matches by SIP
	  header for endpoint bob then you couldn't predict which endpoint is
	  matched when a request comes in that matches both.

	  * Extract the SIP header matching criteria into its own "header" endpoint
	  identification method so the user can specify the relative priority of the
	  SIP header and the IP address matching criteria in the global
	  endpoint_identifier_order option.  The "ip" endpoint identification method
	  now only matches by IP address.

	  ASTERISK-27491

	  Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095

2018-01-16 08:32 +0000 [7ed7d525fb]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Increase the number of tps_singletons container buckets.

	  Since v12 the number of taskprocessors in the system has increased a lot.
	  Small systems can easily have over a hundred and larger systems can have
	  thousands.

	  Most uses of the tps_singletons container deal with creating and
	  destroying the taskprocessors.  However, the pjsip distributor looks up
	  taskprocessors/serializers by name frequently.  It needs to find the
	  serializer for incoming SIP responses to distribute them to the
	  appropriate serializer.

	  Change-Id: Ice0603606614ba49f7c0c316c524735c064e7e43

2018-01-16 08:20 +0000 [f0a3c977d6]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Prevent crash on bad outgoing header

	  We still need to figure out how a bad header is getting into the
	  outgoing message but this patch to pjproject prevents attempting
	  to print that header and causing a crash.

	  For several users, this crash happens when sending 183 progress
	  messages.

	  ASTERISK-26832
	  Reported by: Ross Beer, Jan Rozhon

	  Change-Id: Ie5c5a921c890c843587763e7f33f987dfe66bd16

2018-01-16 06:34 +0000 [a046305fae]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid $EUID and use id -u instead.

	  Makefile included a call to ${EUID} which requires the shell bash. To keep
	  compatibility with other shells like dash or ksh, use id -u instead.

	  ASTERISK-27589

	  Change-Id: Ia6e74f5bc9aab4e6dc62b7439f647b7964e6f657

2018-01-15 18:03 +0000 [6fbe315f77]  Richard Mudgett <rmudgett@digium.com>

	* cel_odbc.c: Fix menuslect module description display.

	  Asterisk's makefile for menuselect has a very simple source file parsing
	  script that looks for AST_MODULE_INFO lines to extract the quoted string
	  as a module description.  If it does not find a quoted string it uses the
	  whole line as the description.

	  Change-Id: I80f13a63818e4e28d683639a94a4dfaea405c1d5

2017-11-19 16:30 +0000 [9cfdb81e91]  Corey Farrell <git@cfware.com>

	* loader: Add dependency fields to module structures.

	  * Declare 'requires' and 'enhances' text fields on module info structure.
	  * Rename 'nonoptreq' to 'optional_modules'.
	  * Update doxygen comments.

	  Still need to investigate dependencies among modules I cannot compile.

	  Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf

2017-11-19 20:10 +0000 [35ae99c712]  Corey Farrell <git@cfware.com>

	* vector: Additional string vector definitions.

	  ast_vector_string_split:
	  This function will add items to an ast_vector_string by splitting values
	  of a string buffer.  Items are appended to the vector in the order they
	  are found.

	  ast_vector_const_string:
	  A vector of 'const char *'.

	  Change-Id: I1bf02a1efeb2baeea11c59c557d39dd1197494d7

2018-01-15 10:57 +0000 [645297614e]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Resolve resolv.h not via Generic but Particular Header-Check.

	  ASTERISK-27585

	  Change-Id: I27c67563788e6f67eeda5fb51a741823a50a95e2

2018-01-13 13:49 +0000 [cabe80631b]  George Joseph <gjoseph@digium.com>

	* config_transport:  Enable TCP_NODELAY on TLS transports

	  We did this for TCP transports already but I'm not sure why we
	  didn't do it for TLS transports.

	  ASTERISK_27474 #not_final_fix

	  Change-Id: I5b1ef4b882f7b859e718236686b7898751dbb262

2018-01-12 18:37 +0000 [de7f2a6cb4]  Corey Farrell <git@cfware.com>

	* res_stasis_recording: Allow symbolic links in configured recordings dir.

	  If any component of ast_config_AST_RECORDING_DIR is a symbolic link we
	  would incorrectly assume the ARI user was trying to escape the recording
	  path.  Create additional check to check the recording directory's
	  realpath, only deny access if both do not match.

	  This is needed by the testsuite when run by 'run-local'.

	  Change-Id: I9145e841865edadcb5f75cead3471ad06bbb56c0

2018-01-12 12:00 +0000 [99535b0497]  Corey Farrell <git@cfware.com>

	* menuselect: Remove unused dev-mode option TRACE_FRAMES.

	  ASTERISK-27575 #close

	  Change-Id: Ica3a522892afed7a96816a5ecf140e1671f46ad4

2018-01-12 03:50 +0000 [eb9b85baec]  Alexander Traud <pabstraud@compuserve.com>

	* res_config_pgsql: Avoid typecasting an int to unsigned char.

	  clang 5.0 warned about this.

	  ASTERISK-27576

	  Change-Id: If41f400a51973c06cdb9b75462e535b616bfe385

2018-01-12 03:17 +0000 [cff3add680]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Really do not pass unknown-warning options to the compiler.

	  When an older GCC version is called with a too new warning option, GCC exited
	  with an error and Asterisk was not built. Therefore, the configure script tests
	  the installed compiler whether it supports that warning option. If not, Asterisk
	  does not pass it to the installed compiler. However, some compilers (like clang)
	  do not exit (error) but give just a warning in such a case. Because the compiler
	  did not exit, Asterisk passed the unknown-warning option.

	  ASTERISK-27560

	  Change-Id: Ia9d148e689c173df4e91699113605dab2de36038

2018-01-12 04:27 +0000 [685bab254c]  Alexander Traud <pabstraud@compuserve.com>

	* app_osplookup.c: Avoid two format truncations.

	  GCC 7 warned about this.

	  ASTERISK-27578

	  Change-Id: I4a00458dbe9b575ef04338b6a7852272745e1552

2018-01-12 04:03 +0000 [797747afa7]  Alexander Traud <pabstraud@compuserve.com>

	* chan_ooh323: Avoid typecasting an int to unsigned short.

	  clang 5.0 warned about this.

	  ASTERISK-27577

	  Change-Id: I898fe4255023138a9e8b579fe4482fcf582f2b78

2018-01-05 15:13 +0000 [b9e2b72de6]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Update Debian/Ubuntu libraries.

	  ASTERISK-27555

	  Change-Id: I0818b6e42631be1b69237e2b41d3415275693e53

2018-01-11 12:05 +0000 [6d5f4768a4]  Joshua Colp <jcolp@digium.com>

	* chan_sip: Check that an iostream exists before accessing.

	  Before getting the file descriptor for an iostream check
	  that it is present.

	  ASTERISK-27534

	  Change-Id: Ie0aa1394007a37c30e337ea1176a6fb3a63bc99c

2018-01-11 08:09 +0000 [30b5ec023f]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Ignore quilt .pc directory, used in deb packaging

	  Debian packaging uses quilt to manage patches. Book-keeping for them is
	  done using quilt (either directly, or in a compatible format), and
	  tracked in the directory .pc .

	  Change-Id: I22c90f3d7ab8918e6216e7b686de6fa0e1fdaa7b
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2018-01-09 11:23 +0000 [f0eb00d1e7]  Corey Farrell <git@cfware.com>

	* stasis: Remove silly usage of RAII_VAR.

	  Change-Id: Ib11193531e797bcb16bba560a408eab155f706d1

2018-01-09 11:09 +0000 [a383e1ddb1]  Corey Farrell <git@cfware.com>

	* stasis_cache_pattern: Remove silly usage of RAII_VAR.

	  Change-Id: Ic98a51f555062cd863b6db3f8d76065943a9dea3

2018-01-09 16:23 +0000 [9e2fcb82ed]  Sean Bright <sean.bright@gmail.com>

	* cdr_syslog: Deprecate unmaintained module

	  There has been an open issue against cdr_syslog (ASTERISK~14441) about
	  a race condition for 7.5 years that has never been addressed. Because
	  this module is effectively unmaintained and currently broken, there is
	  no sense in keeping it around.

	  If logging CDRs to syslog is a desirable feature, it would probably be
	  better to write the logs directly to the syslog server via socket
	  instead of using the facilities provided by openlog/syslog/closelog.
	  Doing so would address the race condition referenced in the associated
	  issue.

	  Change-Id: Ic77b94cd97f355a9cf5b1d3f3444964a6e0ba5dc

2018-01-09 11:16 +0000 [0de004dd85]  Corey Farrell <git@cfware.com>

	* stasis_bridges: Remove silly usage of RAII_VAR.

	  Change-Id: I0fa7ab05454f183dc4ff10e26d18776d2b0fcf1f

2018-01-09 11:10 +0000 [01127e1664]  Corey Farrell <git@cfware.com>

	* stasis_cache: Remove silly usage of RAII_VAR.

	  Change-Id: Ifa95e5801c949df296c7e4376347730fb0ed52ef

2018-01-09 10:57 +0000 [175a9ef873]  Corey Farrell <git@cfware.com>

	* stasis_endpoints: Remove silly usage of RAII_VAR.

	  Change-Id: Ic099dc552f36c353c89783a4bcfd09f010432733

2018-01-09 10:55 +0000 [4b655184b0]  Corey Farrell <git@cfware.com>

	* stasis_message_router: Remove silly usage of RAII_VAR.

	  Change-Id: I50d6ae230920e0b878ed9cc8f79eef746e06701d

2018-01-09 10:53 +0000 [3074c4165c]  Corey Farrell <git@cfware.com>

	* stasis_system: Remove silly usage of RAII_VAR.

	  Change-Id: Iedbe5656cee68cd3a96a953558764aa02d4a0c3b

2018-01-03 17:26 +0000 [8f3167c5f1]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Update the endpoint identification documentation.

	  * Endpoint identify_by documentation.
	  * IP/Header endpoint identifier documentation.

	  Change-Id: Id92f00b495acca7be945daf749d2abd7f76a0b5a

2018-01-03 15:20 +0000 [42a61d9db6]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_endpoint_identifier_ip.c: Remove unnecessary requirement.

	  The requirement that "ip" must be in the endpoint identify_by list to
	  allow the type=identify method to identify the endpoint is not necessary.
	  The "ip" identifier method can match one and only one endpoint.  To even
	  work, the "ip" identifier method configuration must explicitly specify the
	  identified endpoint.  Therefore, why bother configuring the type=identify
	  identifier in the first place?  The requirement only adds the potential
	  for configuration errors for no benefit.  Even worse, those configuration
	  errors cannot be detected when the configuration loads.  The requirement
	  was introduced with the ASTERISK_27206 patch.

	  * Remove the code change that enforces the requiremnt.  Listing the "ip"
	  method in the identify_by value is simply documentation.

	  Change-Id: Ia057f92a33fb5d9f51dc5d5692e3d5ee1a6f2c11

2018-01-05 19:03 +0000 [a7bbb18e5c]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Fix ident_to_str() and refactor ident_handler().

	  * Extracted sip_endpoint_identifier_type2str() and
	  sip_endpoint_identifier_str2type() to simplify the calling functions.

	  * Fixed pjsip_configuration.c:ident_to_str() building the endpoint's
	  identify_by value string.

	  Change-Id: Ide876768a8d5d828b12052e2a75008b0563fc509

2018-01-04 17:04 +0000 [be488eb14a]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_endpoint_identifier_ip.c: Allow multiple IdentifyDetail AMI events.

	  The AMI PJSIPShowEndpoint action could only list one IdentifyDetail AMI
	  event per endpoint.  However, there is no reason that multiple
	  type=identify sections cannot identify the same endpoint.

	  * Reworked format_ami_endpoint_identify() to generate as many
	  IdentifyDetail AMI events as there are matching identifiers.

	  Change-Id: Ie146792aef72d78e05416ab5b27bc552a30399db

2018-01-05 05:51 +0000 [3a7d917256]  Alexander Traud <pabstraud@compuserve.com>

	* translate: Avoid absolute value on unsigned substraction.

	  ast_format_get_sample_rate(.) returns an unsigned type. The difference of a
	  substraction between two unsigned types does not get implicitly converted to a
	  signed type. Therefore, using abs(.) did not make sense.

	  ASTERISK-27549

	  Change-Id: Ib904d9ee0d46b6fdd1476fbc464fbbf813304017

2018-01-09 08:22 +0000 [25022de875]  Sean Bright <sean.bright@gmail.com>

	* Revert "codec_opus: Make libcurl a dependency in menuselect"

	  This reverts commit 028f4320de60a204e457ad606ab0a3318493b431.

	  Change-Id: Ieb91f825cb55202a937f5361c01d356e7662b70c

2018-01-08 10:54 +0000 [a21841bf40]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Always bundle streams if WebRTC is enabled.

	  Some WebRTC clients can't handle renegotiation with the addition of
	  streams that include an offer to bundle. They instead expect the
	  newly added streams to already be bundled. This change does such a thing
	  if WebRTC support is enabled on an endpoint.

	  ASTERISK-27566

	  Change-Id: I7fe9b7ac35a2798627d9c2c8369129f407af6461

2018-01-08 20:25 +0000 [d46cbe788a]  Corey Farrell <git@cfware.com>

	* bridge_softmix: Fix sfu_append_source_streams test.

	  * validate_stream: zero result from ast_format_cap_identical indicates
	    they are not identical, rather than non-zero indicating an error.
	  * validate_original_streams: use num_streams instead of
	    ARRAY_LEN(params).
	  * Fix declaration of alice_dest_stream and bob_dest_stream.

	  Change-Id: I6b1dd8bed10439d3c7406f033eb1896b6c419147

2018-01-08 18:47 +0000 [5380fb9978]  Corey Farrell <git@cfware.com>

	* app_confbridge: Fix NULL check in action_kick_last.

	  The check for last_user == NULL needs to happen before we dereference
	  the variable, previously it was possible for us to check flags of a NULL
	  last_user.

	  Change-Id: I274f737aa8af9d2d53e4a78cdd7ad57561003945

2018-01-06 02:17 +0000 [55a540272f]  Corey Farrell <git@cfware.com>

	* res_stasis: Reduce RAII_VAR usage.

	  In addition to being a micro-optimization (RAII_VAR has overhead), this
	  change improves output of REF_DEBUG.  Unfortunately when RAII_VAR calls
	  ao2_cleanup it does so from a generated _dtor_varname function.  For
	  example this caused _dtor_app to release a reference instead of
	  __stasis_app_unregister.

	  Change-Id: I4ce67120583a446babf9adeec678b71d37fcd9e5

2018-01-04 18:47 +0000 [faeb9e1b26]  Sungtae Kim <pchero21@gmail.com>

	* res_pjsip: Add AMI action 'PJSIPShowAuths'

	  Add an AMI action which provides information on all
	  configured Auths.

	  ASTERISK-27547

	  Change-Id: I1a88a75b38a2b1dd9d1de6c0307b20a3f584c817

2018-01-07 21:38 +0000 [8b3083cac5]  Corey Farrell <git@cfware.com>

	* res_stasis: Fix dial bridge unload.

	  If the dial bridge has been created it must be released by calling
	  ast_bridge_destroy, simply releasing the ao2 reference is not enough.

	  Also move stasis_app_control_shutdown earlier in unload to ensure the
	  bridge cannot be created or grabbed after the app_bridges container is
	  released.

	  Change-Id: I372302de94ca63876069e2585a049c5060e5e767

2018-01-07 20:21 +0000 [6870ba5f26]  Corey Farrell <git@cfware.com>

	* res_stasis: Fix app_is_subscribed_bridge_id.

	  Instead of searching for bridge_id provided in an argument this function
	  always searched for BRIDGE_ALL first.  Rewrite this function to work
	  like the similar functions for channel and endpoint functions.

	  Change-Id: Ib5caca69e11727c5c8a7284a1d00621f40f1e60a

2018-01-05 07:44 +0000 [7e9781c25e]  Alexander Traud <pabstraud@compuserve.com>

	* General: Silence modules on (un)load.

	  Some (normally optional) modules created notices, warnings, and even errors
	  in normal situations like (un)load. This cluttered the command-line interface
	  (CLI) on start and while stopping gracefully. However, when an user went for
	  the script './contrib/scripts/install_prereq', those modules get compiled-in
	  because their prerequisites were met at compile time. Furthermore, because of
	  ASTERISK_27475, the former talkative module 'res_curl' is built as side-effect.

	  ASTERISK-27553

	  Change-Id: I9f105f46d72553994e820679bfde3478a551b281

2018-01-06 15:40 +0000 [512286e3c8]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Really do not pass unknown-warning options to the compiler.

	  When an older GCC version is called with a too new warning option, GCC exited
	  with an error and Asterisk was not built. Therefore, the configure script tests
	  the installed compiler whether it supports that warning option. If not, Asterisk
	  does not pass it to the installed compiler. However, some compilers (like clang)
	  do not exit (error) but give just a warning in such a case. Because the compiler
	  did not exit, Asterisk passed the unknown-warning option.

	  ASTERISK-27560

	  Change-Id: Ia9b7747f649b27ff5e9f75c3db3fee4fe7a29621

2018-01-06 01:25 +0000 [f84fcc1fc1]  Alexander Traud <pabstraud@compuserve.com>

	* General: Avoid implicit conversion to char when changes value to negative.

	  clang 5.0 warned about this.

	  ASTERISK-27557

	  Change-Id: I7cceaa88e147cbdf81a3a7beec5c1c20210fa41e

2018-01-05 06:06 +0000 [b12c8cffad]  Alexander Traud <pabstraud@compuserve.com>

	* bridge_softmix: Removed unused parameter from check_binaural_position_change(.).

	  Found as a result of the function being passed an uninitalized variable by
	  clang.

	  ASTERISK-27550

	  Change-Id: I8af3bd84656b685a956d498459f8db3613f68954

2018-01-06 06:45 +0000 [ad3252ccef]  Alexander Traud <pabstraud@compuserve.com>

	* editline: Avoid comparison between pointer and zero character constant.

	  gcc 7.2 warned about this.

	  ASTERISK-27559

	  Change-Id: I48960dda9cf0a11b6a9426f775e632363f8caa74

2018-01-06 05:01 +0000 [ef68df9111]  Alexander Traud <pabstraud@compuserve.com>

	* codec_gsm: Avoid shifting a negative signed value.

	  clang 5.0 warned about this.

	  ASTERISK-27558

	  Change-Id: Icc452ecb0d86bbeba78dae768cc472ec540699df

2018-01-04 12:23 +0000 [b20b5758d9]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_endpoint_identifier_ip.c: Fix apply identify validation.

	  The ip_identify_apply() did not validate the configuration for simple
	  static configuration errors or deal well with address resolution errors.

	  * Added missing configuration validation checks.
	  * Fixed address resolution error handling.
	  * Demoted an error message to a warning since it does not fail applying
	  the identify object configuration.

	  Change-Id: I8b519607263fe88e8ce964f526a45359fd362b6e

2018-01-04 17:42 +0000 [705e6c04b3]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Fix endpoint identifier registration name search.

	  If an endpoint identifier name in the endpoint_identifier_order list is a
	  prefix to the identifier we are registering, we could install it in the
	  wrong position of the list.

	  Assuming
	  endpoint_identifier_order=username,ip,anonymous

	  then registering the "ip_only" identifier would put the identifier in the
	  wrong position of the priority list.

	  * Fix incorrect strncmp() string prefix matching.

	  Change-Id: Ib8819ec4b811da8a27419fd93528c54d34f01484

2018-01-05 03:33 +0000 [af064eaf13]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Find ptlib-config on Debian/Ubuntu.

	  The current configure script requires that tool when libpt-dev is installed.
	  libpt-dev was installed by libopenh323-dev, bacause you wanted to go for H.323
	  based channel drivers.

	  ASTERISK-25329

	  Change-Id: I9c6ab78b7246c21536e1d252dcbffe682f63f83d

2018-01-05 06:42 +0000 [f0c8f04c73]  Alexander Traud <pabstraud@compuserve.com>

	* chan_ooh323: Limit outgoinglimit to positive values as intended.

	  ASTERISK-27552

	  Change-Id: Ifbf9d51e7374ca2e8b27ec568f6770050fc1a854

2018-01-05 06:19 +0000 [09f339bda5]  Alexander Traud <pabstraud@compuserve.com>

	* ooh323cDriver: Fix typo in header guard.

	  ASTERISK-27551

	  Change-Id: I39ff66031e3373e895e2bc47b23a5e860ea4e012

2018-01-05 03:36 +0000 [bc1b4f4d43]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid obsolete warning with HELP_STRING on autoconf.

	  ASTERISK-26046

	  Change-Id: I48f05698c235f709225b92bec5aa260fb57d69d1

2018-01-04 15:37 +0000 [cfb88f3ac1]  Corey Farrell <git@cfware.com>

	* pbx: Prevent execution of NULL pointer.

	  pbx_extension_helper has a check for q->swo.exec == NULL but it doesn't
	  actually return so we would still run the function.  Fix the return.
	  Move the 'int res' variable into the only scope which uses it.

	  Also fix a copy-paste error in ast_pbx_init which could result in a
	  crash on allocation failure (we exit with a normal error instead).

	  Change-Id: I0693af921fdc7f56b6a72a21fb816ed08b960a69

2018-01-04 10:50 +0000 [82cf585fb5]  Corey Farrell <git@cfware.com>

	* translators: Don't use ast_module_running_ref.

	  Translators are run during module load before the module is actually
	  running, so it cannot use ast_module_running_ref.

	  ASTERISK-20346

	  Change-Id: Iaa0e75da99c696e38000f1a41e340abbd7a88f56

2018-01-04 09:39 +0000 [da365affbd]  Corey Farrell <git@cfware.com>

	* rtp_engine: Add missing unlock.

	  Change-Id: I380c31a255e060309f4916da11176e0d00813215

2018-01-04 09:30 +0000 [73bf5035b8]  Corey Farrell <git@cfware.com>

	* res_pjsip_history: Add missing unlock to CLI command.

	  Change-Id: I872060a30543776a176a316309602d924a23eb29

2018-01-04 09:27 +0000 [aaed0b8b3a]  Corey Farrell <git@cfware.com>

	* aco: Fix NULL dereference in error path.

	  Change-Id: Id505167cf0f9414a3c144fa2c1e181a2cf288694

2018-01-03 19:07 +0000 [e3c9314a2e]  Corey Farrell <git@cfware.com>

	* func_odbc: Add missing unlock's to acf_odbc_read.

	  Change-Id: I828329ecbd252ae8f27a369a046d2b03102b07c6

2017-12-29 18:24 +0000 [55f1d69c43]  Corey Farrell <git@cfware.com>

	* loader: Create ast_module_running_ref.

	  This function returns NULL if the module in question is not running.  I
	  did not change ast_module_ref as most callers do not check the result
	  and they always call ast_module_unref.

	  Make use of this function when running registered items from:
	  * app_stack API's
	  * bridge technologies
	  * CLI commands
	  * File formats
	  * Manager Actions
	  * RTP engines
	  * Sorcery Wizards
	  * Timing Interfaces
	  * Translators
	  * AGI Commands
	  * Fax Technologies

	  ASTERISK-20346 #close

	  Change-Id: Ia16fd28e188b2fc0b9d18b8a5d9cacc31df73fcc

2018-01-03 10:41 +0000 [62f862e2cd]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_session: Check if sequence header is missing

	  The pjsip_msg_find_hdr function can return NULL. This patch adds a check
	  when searching for the sequence header to make sure a NULL pointer is never
	  de-referenced.

	  Change-Id: I19af23aeeded65be016be92360e8cb7ffe51fad2

2018-01-02 07:36 +0000 [9b5d1454b4]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* cdr: submit: fix logic of test for batch mode

	  ASTERISK-27539 #close

	  Change-Id: I33cdf329d2bb4486dcae975c450f6aae94c515f7

2017-12-29 23:14 +0000 [ffbf5be116]  Sungtae Kim <pchero21@gmail.com>

	* res_pjsip: Add AMI action 'PJSIPShowAors'

	  Add an AMI action which provides information on all
	  configured AORs.

	  ASTERISK-27537

	  Change-Id: If8b990a00909e5b6c0f04a3b8dccd9903dc445eb

2018-01-02 00:26 +0000 [f298178583]  Corey Farrell <git@cfware.com>

	* aco: Add missing aco_option_type_string for OPT_TIMELEN_T.

	  ASTERISK-27117

	  Change-Id: I8f6c34bb30830be9f7a40823723eb4dcaaa91c61

2017-12-31 10:26 +0000 [15f8b9b8bf]  Sean Bright <sean.bright@gmail.com>

	* ice: Increase foundation buffer size

	  Per RFC 5245, the foundation specified with an ICE candidate can be up
	  to 32 characters but we are only allowing for 31.

	  ASTERISK-27498 #close
	  Reported by: Michele Prà

	  Change-Id: I05ce7a5952721a76a2b4c90366168022558dc7cf

2017-12-29 22:03 +0000 [b32d6d5e2d]  Corey Farrell <git@cfware.com>

	* astobj2: Create case-insensitive variants of container function macros.

	  * AO2_STRING_FIELD_CASE_HASH_FN
	  * AO2_STRING_FIELD_CASE_CMP_FN
	  * AO2_STRING_FIELD_CASE_SORT_FN

	  Change-Id: I11af8c6a0c43380a42732553f519c667abb842cf

2017-12-29 22:59 +0000 [bc73337e07]  Corey Farrell <git@cfware.com>

	* core: Use macros to generate ao2_container callbacks where possible.

	  This uses AO2_STRING_FIELD_HASH_FN and AO2_STRING_FIELD_CMP_FN where
	  possible in the Asterisk core.

	  This removes CMP_STOP from the result of CMP_FN callbacks for the
	  following structure types:
	  * ast_bucket_metadata
	  * ast_bucket_scheme
	  * generic_monitor_instance_list (ccss.c)
	  * ast_bucket_file (media_cache.c)
	  * named_acl

	  Change-Id: Ide4c1449a894bce70dea1fef664dade9b57578f1

2017-12-29 14:50 +0000 [0fe7df641a]  Corey Farrell <git@cfware.com>

	* datastore: Add automatic module references.

	  Add a reference to the calling module when it is active to protect
	  access to datastore->info.  Remove module references done by
	  func_periodic_hook as the datastore now handles it.

	  ASTERISK-25128 #close

	  Change-Id: I8357a3711e77591d0d1dd8ab4211a7eedd782c89

2017-12-28 13:27 +0000 [2dde5bef47]  Richard Mudgett <rmudgett@digium.com>

	* stasis_channels.c: Misc cleanup.

	  * Use current OBJ_SEARCH_xxx defines instead of the deprecated versions.

	  * Fix hash_cb and cmp_cb container functions to correctly use the
	  OBJ_SEARCH_xxx values.

	  * Remove incorrect usage of CMP_STOP.  Most uses in the system have no
	  effect.  This allows the collapse of channel_role_single_cmp_cb() and
	  channel_role_multi_cmp_cb() into channel_role_cmp_cb().

	  * Remove unnecessary usage of RAII_VAR().

	  Change-Id: I02c405518cab22aa2a082b61e2353bf7cd629a70

2017-12-13 15:43 +0000 [898b3b080a]  Sean Bright <sean.bright@gmail.com>

	* cdr_mysql: Make sure connection charset is always set

	  When the MYSQL_OPT_RECONNECT option is enabled, the MySQL client API
	  will transparently reconnect when it needs to. Ideally this simplifies
	  our code, but when this reconnection occurs all connection state is
	  lost. Because we are not notified that this has happened, we don't know
	  to set our character set again (with "SET NAMES 'xyz'").

	  Rather than calling SET NAMES, we instead set the MYSQL_SET_CHARSET_NAME
	  option which will do it for us under the hood on each connect. This
	  option has been present in the MySQL C API for at least 15 years, so it
	  should be safe for most installations.

	  I also snuck a few other changes into this patch:

	  * Default the MySQL port to MYSQL_PORT (3306) instead of 0 if it's not
	    defined.

	  * Fix some erroneous and/or silly checks on the contents of the
	    configuration ast_str values.

	  ASTERISK-27366 #close
	  Reported by: Halil İbrahim YILDIZ

	  Change-Id: I36bf8dc5d5f83584e803b3b1a151dea9396ab8f5

2017-12-27 20:48 +0000 [d69b7c6c6d]  Richard Mudgett <rmudgett@digium.com>

	* manager.c: Update AMI Status event documentation

	  The AMI Status event had linkedid listed twice and was missing the
	  effective connected line name and number headers.

	  NOTE: The linkedid and other standard channel snapshot fields in the XML
	  documentation are part of the <channel_snapshot/> XML template defined in
	  doc/appdocsxml.xslt.

	  Change-Id: I004c4c4f9e7b40ef55035c831702721bec82496c

2017-12-27 22:36 +0000 [fa36f9c01b]  Richard Mudgett <rmudgett@digium.com>

	* bridge_native_rtp.c: Fix reentrancy framehook crash.

	  If two channels enter different native rtp bridges at the same time it is
	  possible that the framehook interface data pointer can be corrupted
	  because the struct variable was declared static.

	  * Fixed the reentrancy corruption by changing the framehook interface
	  struct static variable to a stack local variable.

	  * Moved the hook.data assignment outside of the channel lock.  It did not
	  need the lock's protection.  It probably was giving a false sense of
	  security.

	  The testsuite
	  channels/pjsip/basic_calls/two_parties/nominal/alice_initiated/bob_hangs_up
	  test caught this with MALLOC_DEBUG and DO_CRASH enabled.

	  Change-Id: If9e35b97d19209b0f984941c1d8eb5f7c55eea91

2017-12-27 20:22 +0000 [1d3dc9aea2]  Richard Mudgett <rmudgett@digium.com>

	* func_channel.c: Update MASTER_CHANNEL documentation

	  Be more explicit in what is meant by the master channel to eliminate
	  misunderstanding.

	  ASTERISK-23133

	  Change-Id: I453bcaf4b99404a5a3e345dbf093ac6c1afcfc72

2017-12-27 19:27 +0000 [6338a03ce9]  Corey Farrell <git@cfware.com>

	* menuselect: Fix check for running configure.

	  menuselect/Makefile checks that autoconfig.h and makeopts were newer
	  than the '.in' files.  Unfortunately running ./configure does not touch
	  autoconfig.h unless the contents will change.

	  Instead of looking at autoconfig.h we just need to ensure that makeopts
	  is newer than configure.

	  Also make change to configure.ac so bootstrap.sh doesn't re-add the
	  extra trailing line-feed.

	  Change-Id: Ief1f831d6717007f9cebb668c14e92782cd2b794

2017-12-21 23:56 +0000 [94eb12ca56]  Corey Farrell <git@cfware.com>

	* cdr: Missing NULL check and unlock.

	  * handle_dial_message: Missing a check for NULL peer.
	  * cdr_generic_register: Missing unlock on allocation failure.

	  cdr_generic_register is fixed by reordering so the new structure is
	  allocated and initialized before locking the list.

	  Change-Id: I5799b99270d1a7a716a555c31ac85f4b00ce8686

2017-12-23 22:51 +0000 [23aa20bf20]  Corey Farrell <git@cfware.com>

	* loader: Add volatile to resource_being_loaded.

	  Some compiler optimizers seem to assume that dlopen will not use
	  __attribute__((constructor)) functions to call back to the program.
	  This was causing resource_being_loaded to be optimized away completely.

	  ASTERISK-27531 #close
	  Tested By: abelbeck

	  Change-Id: If17a3b889e06811a0e7119f0539d052494d6ece9

2017-12-20 16:17 +0000 [553306548c]  Kevin Harwell <kharwell@digium.com>

	* AST-2017-014: res_pjsip - Missing contact header can cause crash

	  Those SIP messages that create dialogs require a contact header to be present.
	  If the contact header was missing from the message it could cause Asterisk to
	  crash.

	  This patch checks to make sure SIP messages that create a dialog contain the
	  contact header. If the message does not and it is required Asterisk now returns
	  a "400 Missing Contact header" response. Also added NULL checks when retrieving
	  the contact header that were missing as a "just in case".

	  ASTERISK-27480 #close

	  Change-Id: I1810db87683fc637a9e3e1384a746037fec20afe

2017-12-22 14:00 +0000 [c2529a352c]  Corey Farrell <git@cfware.com>

	* astobj.h: Remove from Asterisk core.

	  This is the old ASTOBJ macro's which are no longer used except by the
	  deprecated netsock.c.  Move it to the chan_iax2 include folder so it
	  does not get used elsewhere.

	  Change-Id: I7e4ae96678b36b9f41d3cae14b167f110eb5d349

2017-12-22 08:23 +0000 [fd0ca1c3f9]  Sean Bright <sean.bright@gmail.com>

	* Remove as much trailing whitespace as possible.

	  Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0

2017-12-21 09:51 +0000 [a1a179c09d]  Sean Bright <sean.bright@gmail.com>

	* Fix some invalid Unicode characters

	  configs/samples/minivm.conf.sample contains invalid UTF-8, but that
	  appears to be intentional.

	  Change-Id: I7b1e0d332f3380fd0425962a3c9c55f9b200c8cc

2017-12-20 21:11 +0000 [f2f51ff4ea]  Corey Farrell <git@cfware.com>

	* app_voicemail: Fix file copy error handling.

	  Fix error where input/output file descriptors would be closed multiple
	  times.

	  Change-Id: Iba5140b60cb7de79e3d5d92be3c256947aa99da9

2017-12-20 14:54 +0000 [9415ec2877]  Sean Bright <sean.bright@gmail.com>

	* docs: Remove old API changes documentation

	  Change-Id: I1bc7957121cc7ae27dca04acc3613f4e1858476a

2017-12-20 11:14 +0000 [1b80ffa495]  Corey Farrell <git@cfware.com>

	* Fix Common Typo's.

	  Fix instances of:
	  * Retreive
	  * Recieve
	  * other then
	  * different then
	  * Repeated words ("the the", "an an", "and and", etc).
	  * othterwise, teh

	  ASTERISK-24198 #close

	  Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31

2017-12-20 11:30 +0000 [3625e91586]  Richard Mudgett <rmudgett@digium.com>

	* manager.h: Bump AMI version

	  Change-Id: I62e6ddeb261ef012687e1fb6734c554e2499b6bf

2017-12-20 10:23 +0000 [aaa3884d4a]  Corey Farrell <git@cfware.com>

	* bridge: Old channel video source not set to NULL after unref.

	  The bridge holds onto the old channel video source after it's been
	  released.  This can lead to use after free errors.

	  ASTERISK-27229 #close

	  Change-Id: Ib2dab61677dd8a21f7ad53cdc9b8ca93297838b3

2017-12-20 10:13 +0000 [c2850bfebc]  Corey Farrell <git@cfware.com>

	* core: Fix unused variable error in handle_show_sysinfo.

	  Apparently in OSX it's possible for OSX to HAVE_SYSCTL but not
	  HAVE_SYSINFO or HAVE_SWAPCTL.  In this case freeswap caused an unused
	  variable error.

	  ASTERISK-26563 #close

	  Change-Id: I8ec5b1897b786cc1abaf62264aa75039eea05510

2017-12-20 00:53 +0000 [fff7782cf5]  Corey Farrell <git@cfware.com>

	* app_festival: Fix fd leak on connection failure.

	  Change-Id: If5efaddcf735ff7d17e55c36cc1388946cee9e0f

2017-12-18 20:12 +0000 [d51837a1b9]  Corey Farrell <git@cfware.com>

	* CLI: Address multiple issues.

	  * listen uses the variable `s` for the result from ast_poll() then
	    overwrites it with the result of accept().  Create a separate variable
	    poll_result to avoid confusion since ast_poll does not return a file
	    descriptor.
	  * Resolve fd leak that would occur if setsockopt failed in listen.
	  * Reserve an extra byte while processing completion results from remote
	    daemon.  This fixes a bug where completion processing used strstr() on
	    a string that was not '\0' terminated.  This was no risk to the Asterisk
	    daemon, the bug was only reachable the remote console process.
	  * Resolve leak in handle_showchan when the channel is not found.
	  * Multiple leaks and a deadlock in pbx_config CLI completion.
	  * Fix leaks in "manager show command".

	  Change-Id: I8f633ceb1714867ae30ef4e421858f77c14485a9

2017-12-18 22:48 +0000 [b8f54f742f]  Corey Farrell <git@cfware.com>

	* dns_core: Protect against array index violation.

	  Add a check to allocate_dns_record to prevent calling a pointer
	  retrieved from beyond dns_alloc_table.

	  ASTERISK-27495 #close

	  Change-Id: Ie2f6e4991cea46baa12e837bd64cc22b44d322bb

2017-12-18 18:59 +0000 [3c037ef972]  Corey Farrell <git@cfware.com>

	* chan_sip: Fix memory leaks.

	  In change_redirecting_information variables we use ast_strlen_zero to
	  see if a value should be saved.  In the case where the value is not NULL
	  but is a zero length string we leaked.

	  handle_response_subscribe leaked a reference to the ccss monitor
	  instance.

	  Change-Id: Ib11444de69c3d5b2360a88ba2feb54d2c2e9f05f

2017-12-16 07:51 +0000 [3b99a0332c]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* bridge: Stop music on hold on adding an arbitrary channel to a bridge

	  When a channel that is on hold gets added to a bridge by
	  the Bridge AMI action or the dialplan application of the same name,
	  music continues to play, causing "robotic sound".

	  This commit adds a call to ast_moh_stop to stop the music.
	  Also, it makes the AMI Park action use the right MOH class when the
	  channel gets parked.

	  Reported by: Zane Conkle

	  ASTERISK-25079 #close

	  Change-Id: I4b129c5a20c15e63968842460ac5a1a85903cf9f

2017-12-18 15:36 +0000 [b3e839debd]  Corey Farrell <git@cfware.com>

	* Remove constant conditionals (dead-code).

	  Some variables are set and never changed, making them constant.  This
	  means that code in the 'false' block of the conditional is unreachable.

	  In chan_skinny and res_config_ldap I used preprocessor directive `#if 0`
	  as I'm unsure if the unreachable code could be enabled in the future.

	  Change-Id: I62e2aac353d739fb3c983cf768933120f5fba059

2017-12-19 02:50 +0000 [c02e256407]  Oron Peled <oron.peled@xorcom.com>

	* chan_console: Use correct parameter for 'set active'

	  chan_console supports multiple devices but the CLI only works on a
	  single device. 'console set active' selects this device.

	  Sadly that CLI picks the wrong command-line parameter and will only
	  work for a device called 'active'.

	  ASTERISK-27490 #close

	  Change-Id: I2f0e5fe63db19845bee862575b739360797dc73d

2017-12-18 23:17 +0000 [bf33a09c37]  Corey Farrell <git@cfware.com>

	* core: Fix multiple trivial issues in the core.

	  * Fix small leaks in from error conditions in sdp.c and translate.c.
	  * Check new file descriptor is less than 0, not less than or equal.

	  Change-Id: Id7782775486175c739e0c4bf3ea5e17e3f452a99

2017-12-18 06:14 +0000 [81474dfb23]  Aaron An <anjb@ti-net.com.cn>

	* res_rtp_asterisk:  Avoid close the rtp/rtcp fd twice.

	  When RTCP-MUX enabled. rtp->s is the same as rtcp->s, check this before
	  close the file descriptor. Close the FD twice will hangs the asterisk
	  under heavy load.

	  ASTERISK-27299 #close
	  Reported-by: Aaron An
	  Tested-by: AaronAn

	  Change-Id: I870a072d73fd207463ac116ef97100addbc0820a

2017-12-18 19:47 +0000 [8dfc973d64]  Corey Farrell <git@cfware.com>

	* main/app: Fix leaks.

	  * ast_linear_stream would leak a file descriptor if it failed to allocate
	    lin.
	  * ast_control_tone leaked zone and ts if ast_playtones_start failed.

	  Additionally added whitespace to ast_linear_stream, pulled assignments
	  out of conditionals for improved readability.

	  Change-Id: I6d1a10cf9161b1529d939b9b2d63ea36d395b657

2017-12-18 19:19 +0000 [a790ced2e8]  Corey Farrell <git@cfware.com>

	* func_callerid: Initialize app argument structures.

	  This module uses AST_DEFINE_APP_ARGS_TYPE to define struct's instead of
	  directly using AST_DECLARE_APP_ARGS.  Initialize the variables declared
	  in this way.

	  Change-Id: If97fbdd8d63a204e2efd498a192effc14e90fb31

2017-08-11 17:02 +0000 [4c04e13783]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c: Change remove_destination_streams() return meaning.

	  The return value of remove_destination_streams() now means we removed a
	  stream from the topology by making it a dead stream.  Now we won't try to
	  request a topology change if we didn't remove any streams.

	  Change-Id: Icd91571d856a1d04299a24c411e325c1d9d5c61d

2017-08-11 16:57 +0000 [ea4179599f]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c: Don't match dead streams.

	  * Made is_video_source() and is_video_dest() not match dead streams.

	  * Optimized is_video_dest() to reduce duplicated code.

	  Change-Id: I4e7ab762c7ee98395e78e6516399f57a2609b9a1

2017-12-18 18:40 +0000 [91d9eae79b]  Corey Farrell <git@cfware.com>

	* bridge_softmix: Fix memory leaks.

	  Change-Id: Ifaf3e93b398595d21d07f535330fef77ff15a80c

2015-11-11 17:20 +0000 [f6393b59af]  Richard Mudgett <rmudgett@digium.com>

	* ast_json_pack(): Use safer json ref mechanism.

	  Change-Id: I49204db2e57ae96eee43909c18ed007c09ac817e

2017-12-18 18:04 +0000 [dc04d1ec93]  Corey Farrell <git@cfware.com>

	* app_voicemail: Fix memory management issues.

	  * mwi_sub_event_cb: mwist leaked on separate_mailbox failure.
	  * add_email_attachment: A reference to sox_gain_tmpdir was used
	    after the storage was out of scope.

	  Change-Id: I6282c542ff7b82fa091177a912d11234a8b00a30

2015-11-11 16:52 +0000 [7054fb8756]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.c: Eliminate rtcp_report_to_json() RAII_VAR usage.

	  Change-Id: I58a22c2ca82e91d7537409b7b3af2d735827a54d

2017-12-06 20:35 +0000 [5335ad117d]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: Add feature to set wrapuptime on the queue member

	  This patch adds the ability to set the wrapuptime on the queue member
	  config.

	  When the option is set the wrapuptime on the queue member is used instead
	  of the queue's wrapuptime.

	  ASTERISK-27483 #close

	  Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902

2017-12-18 14:00 +0000 [064c74e4af]  Corey Farrell <git@cfware.com>

	* netsock: Remove from Asterisk core.

	  This moves netsock.c / netsock.h to the chan_iax2 module.  netsock.h has
	  been marked deprecated since 13.0.0, chan_iax2 is the only remaining
	  user.

	  Change-Id: I28c6578043bac18de5ea608e136acec4f83d5dd3

2017-12-18 12:23 +0000 [731a23fba7]  Corey Farrell <git@cfware.com>

	* CLI: Fix 'core set debug channel' completion bug.

	  The completion generator is missing a return so typing "core set debug
	  all off <tab>" causes the command to actually execute.

	  Change-Id: Ibf6462088a74eee66967732b50445783ebefc20b

2017-12-18 08:25 +0000 [1769d4a5c6]  Joshua Colp <jcolp@digium.com>

	* confbridge: Clarify mute sound documentation.

	  The mute/unmute sounds are only played when the
	  action is initiated using the DTMF menu.

	  ASTERISK-24756

	  Change-Id: I55b3dd5bc166096bf5e2f547ddd0ce355f36e3dc

2017-12-18 06:36 +0000 [b40c00c97b]  Joshua Colp <jcolp@digium.com>

	* app_transfer: Remove LOCAL from documentation.

	  The Local channel has never supported app_transfer
	  from what I can see so remove it from the documentation.

	  ASTERISK-25649

	  Change-Id: Icbcfe297f6f866285a26b3e9fd5c6d00fa22e0e9

2017-12-15 19:01 +0000 [4a461bcde4]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip.c: Improve ast_request() diagnostic msgs.

	  Attempting to dial PJSIP/endpoint when the endpoint doesn't exist and
	  disable_multi_domain=no results in a misleading empty endpoint name
	  message.  The message should say the endpoint was not found.

	  * Added missing endpoint not found message.

	  * Added more information to the empty endpoint name msgs if available.

	  * Eliminated RAII_VAR in request().

	  Change-Id: I21da85ebd62dcc32115b2ffcb5157416ebae51e4

2016-10-06 01:29 +0000 [6f8b34f9c1]  Corey Farrell <git@cfware.com>

	* chan_sip: Add security event for calls to invalid extension.

	  Log a message to security events when an INVITE is received to an
	  invalid extension.

	  ASTERISK-25869 #close

	  Change-Id: I0da40cd7c2206c825c2f0d4e172275df331fcc8f

2017-12-15 10:26 +0000 [e6768c0f81]  Corey Farrell <git@cfware.com>

	* cdr: Minor optimizations.

	  * bridge_candidate_process: remove SCOPED_AO2LOCK and return value.
	  * handle_standard_bridge_enter_message: replace recursive call with goto
	    statement.

	  ASTERISK-24297

	  Change-Id: Id2eaa0822fb8dc799f63422bb3aa89de9d4ee2a2

2017-12-12 12:55 +0000 [bf2d35931d]  Corey Farrell <git@cfware.com>

	* aco: Minimize use of regex.

	  Remove nearly all use of regex from ACO users.  Still remaining:
	  * app_confbridge has a legitamate use of option name regex.
	  * ast_sorcery_object_fields_register is implemented with regex, all
	    callers use simple prefix based regex.  I haven't decided the best
	    way to fix this in both 13/15 and master.

	  Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b

2017-12-12 12:36 +0000 [a455e18320]  Corey Farrell <git@cfware.com>

	* aco: Create ways to minimize use of regex.

	  ACO uses regex in many situations where it is completely unneeded.  In
	  some cases this doubles the total processing performed by
	  aco_process_config.

	  * Create ACO_IGNORE category type for use in place of skip_category
	    regex source string.
	  * Create additional aco_category_op values to allow specifying category
	    filter using either a single plain string or a NULL terminated array
	    of plain strings.
	  * Create ACO_PREFIX to allow matching option names to case insensitive
	    prefixes.

	  Change-Id: I66a920dcd8e2b0301f73f968016440a985e72821

2017-12-15 07:56 +0000 [03c25a869f]  Corey Farrell <git@cfware.com>

	* res_smdi: Fix shutdown ref.

	  When adding shutdown refs for OPTIONAL_API components I accidentally
	  added it to the unload_module function in res_smdi.  Move it to
	  load_module.

	  Change-Id: I2b9da38fbc11ef78ea23dbb2df92b684be7f647c

2017-12-11 17:07 +0000 [9d5797616c]  Corey Farrell <git@cfware.com>

	* loader: Use vector to build apha sorted module lists.

	  Change-Id: I9c519f4dec3cda98b2f34d314255a31d49a6a467

2017-11-21 00:28 +0000 [7b54903313]  Corey Farrell <git@cfware.com>

	* loader: Replace priority heap with vector.

	  This is needed for future changes which will require being able to
	  process the load priority out of order.

	  Change-Id: Ia23421197f09789940510b03ebbbf3bf24d51bea

2017-12-14 18:55 +0000 [9755eff46f]  Sean Bright <sean.bright@gmail.com>

	* res_hep: hepv3_is_loaded() should check if we are enabled

	  res_hep_pjsip.so and res_hep_rtcp.so will still load and do a lot of
	  unnecessary work even if 'enabled' is set to 'no' in hep.conf.

	  Change-Id: I3eddfeea09c6b5bc7c641952ee0ae487fd09b64b

2017-11-20 23:10 +0000 [3505cc88e8]  Corey Farrell <git@cfware.com>

	* loader: Rework of load_dynamic_module.

	  * Split off load_dlopen to perform actual dlopen, check results and log
	    warnings when needed.
	  * Always use RTLD_NOW.
	  * Use flags which minimize number of calls to dlopen required.  First
	    attempt always uses RTLD_GLOBAL when global_symbols_only is enabled,
	    RTLD_LOCAL when it is not.

	  This patch significantly reduces the number of dlopen's performed.  With
	  299 modules my system ran dlopen 857 times before this patch, 655 times
	  after this patch.

	  Change-Id: Ib2c9903cfddcc01aed3e01c1e7fe4a3fb9af0f8b

2017-11-21 20:34 +0000 [80bf0ee99a]  Corey Farrell <git@cfware.com>

	* loader: Minor fix to module registration.

	  This protects the module loader itself against crashing if dlopen is
	  called on a module from outside loader.c.

	  * Expand scope of lock inside ast_module_register to include reading of
	    resource_being_loaded.
	  * NULL check resource_being_loaded.
	  * Set resource_being_loaded NULL as soon as dlopen returns.  This fixes
	    some error paths where it was not NULL'ed.
	  * Create module_destroy function to deduplicate code from
	    ast_module_unregister and modules_shutdown.
	  * Resolve leak that occured if a module did not successfully register.
	  * Simplify checking for successful registration.

	  Change-Id: I40f07a315e55b92df4fc7faf525ed6d4f396e7d2

2017-12-14 15:27 +0000 [a8aa209901]  Corey Farrell <git@cfware.com>

	* res_clialiases: Fix completion pass-through.

	  Never ignore contents of line when generating completion options.

	  Change-Id: I74389efdfea154019d3b56a9f381610614c044c8

2017-12-11 18:20 +0000 [98f7e9251f]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Disable packet flood detection for video streams.

	  We should not do flood detection on video RTP streams.  Video RTP streams
	  are very bursty by nature.  They send out a burst of packets to update the
	  video frame then wait for the next video frame update.  Really only audio
	  streams can be checked for flooding.  The others are either bursty or
	  don't have a set rate.

	  * Added code to selectively disable packet flood detection for video RTP
	  streams.

	  ASTERISK-27440

	  Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70

2017-12-14 14:05 +0000 [283d2df680]  George Joseph <gjoseph@digium.com>

	* res_pjsip_sdp_rtp: Add NULL check in add_crypto_to_stream

	  add_crypto_to_stream wasn't checking for a NULL
	  session->inv_session->neg before calling pjmedia_sdp_neg_get_state.
	  This was causing a crash if the negotiation hadn't already been
	  completed and asterisk was compiled with --enable-dev-mode.

	  Change-Id: I57c6229954a38145da9810fc18657bfcc4d9d0c9

2017-12-14 12:14 +0000 [c387beb456]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Start playlist after initial announcement

	  Reset the samples counter to zero when we are done playing an
	  announcement so that we don't skip into the middle of the first file in
	  the playlist.

	  Also add the selected annoucement to the output of 'moh show classes.'

	  ASTERISK-24329 #close
	  Reported by: Thomas Frederiksen

	  Change-Id: I2a5f986a31279c981592f49391409ebf38d6f6d0

2017-12-14 10:51 +0000 [7a8a187a56]  Sean Bright <sean.bright@gmail.com>

	* coverity: Fix warnings in res_smdi

	  ASTERISK-19657 #close
	  Reported by: Matt Jordan III, Esq.

	  Change-Id: I59a5e6ef3e7d9e848bec1f4b40cb73321bc7956a

2017-12-14 10:22 +0000 [dac5e3a0df]  Sean Bright <sean.bright@gmail.com>

	* configs: Comment out and change IP of iax.conf [demo]

	  This no longer appears to exist, so no sense in causing confusion.

	  ASTERISK-27175 #close
	  Reported by: Tzafrir Cohen

	  Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100

2017-12-13 14:26 +0000 [a51bfe5a79]  George Joseph <gjoseph@digium.com>

	* README: Remove outdated references to tex docs

	  Added links to the wiki to replace references to outdated
	  tex docs.

	  ASTERISK-27430
	  Reported by: Corey Farrell

	  Change-Id: I5007e732b30bc7b63d124c530ae8857c89991209

2017-12-13 09:50 +0000 [5f6a3c4399]  Corey Farrell <git@cfware.com>

	* CLI: Remove special handling of 'core set verbose' from rasterisk.

	  rasterisk does not need to handle setting verbose levels locally, it
	  should just tell the daemon what it wants and print what it is given.
	  Just max out the verbose level on the local client so all filtering
	  happens on the daemon.

	  ASTERISK-20281 #close

	  Change-Id: Ia305f75f1fc424a9169bfa30ef70d626ace2c8a8

2017-12-08 06:48 +0000 [daa3a3009a]  sungtae kim <pchero21@gmail.com>

	* Add new AMI action for app_voicemail

	  Currently, to figure out specified voicemail's status, there's only one
	  way to do it, which is use a VoicemailUserEntry AMI message.
	  But it consumed it too much resource(it check everything).
	  So, added new AMI action.

	  ASTERISK-27470

	  Change-Id: Ie4eba1424a142e5fbd1d9fb1821a3fc1a1e238b7

2017-11-30 10:12 +0000 [62f2860c39]  Joshua Colp <jcolp@digium.com>

	* AST-2017-012: Place single RTCP report block at beginning of report.

	  When the RTCP code was transitioned over to Stasis a code change
	  was made to keep track of how many reports are present. This count
	  controlled where report blocks were placed in the RTCP report.

	  If a compound RTCP packet was received this logic would incorrectly
	  place a report block in the wrong location resulting in a write
	  to an invalid location.

	  This change removes this counting logic and always places the report
	  block at the first position. If in the future multiple reports are
	  supported the logic can be extended but for now keeping a count
	  serves no purpose.

	  ASTERISK-27382
	  ASTERISK-27429

	  Change-Id: Iad6c8a9985c4b608ef493e19c421211615485116

2017-12-13 06:54 +0000 [3370cd21df]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Reinvite using active stream topology if none requested.

	  When a connected line update is sent to an endpoint we do not request
	  a specific stream topology to be used. Previously this resulted in the
	  configured stream topology being used which may actually differ from the
	  currently negotiated topology. PJSIP is helpful in this regard in that
	  it will fill in any missing streams with removed ones. This results in
	  our own state not matching the SDP, though, and we do not apply the
	  negotiated SDP.

	  This change tweaks the code to use the actively negotiated stream
	  topology if it is present with a fallback to the configured one. This
	  results in the SDP and the state having matching information and the
	  world is happy.

	  ASTERISK*27397

	  Change-Id: I7a57117f0183479e6884b7bf3a53bb8c7464f604

2017-12-06 08:24 +0000 [0b532367bd]  Joshua Colp <jcolp@digium.com>

	* pjsip: Ignore state changes from old transactions.

	  When we fail over to a new target we create a new transaction
	  and it becomes the current INVITE transaction. This does not
	  prevent the previous transaction from raising state changes
	  and causing the session to be prematurely disconnected if a
	  transport error occurs immediately.

	  This change backports a fix from PJSIP that eliminates the
	  incorrect state change and reduces when they would be raised
	  in the first place.

	  ASTERISK-27408

	  Change-Id: Id22d087591782eee31311753d11e7eca4b95ef34

2017-12-12 22:42 +0000 [cb249b2419]  Yasuhiko Kamata <yasuhiko.kamata@nxtg.co.jp>

	* chan_sip: 3PCC patch for AMI "SIPnotify"

	  A patch for sending in-dialog SIP NOTIFY message
	  with "SIPnotify" AMI action.

	  ASTERISK-27461

	  Change-Id: I5797ded4752acd966db6b13971284db684cc5ab4

2017-12-12 15:38 +0000 [c7f94e570e]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* app_queue: Fix extension state subscriptions removed on dialplan reload

	  The approach with having a single global subscription to all extension
	  state changes has one issue: dynamically created hints don't have any
	  watchers and are therefore garbage collected on the first dialplan
	  reload.

	  This change creates a state subscription for every queue member with a
	  hint as state_interface, thus increasing the count of watches for
	  hints, so they are not destroyed prematurely anymore.

	  There are 2 side effects:
	  1. The state change callback in app_queue is not executed when
	     there are no members referring to the extension.
	  2. The callback is called multiple times for the same hint if it's
	     associated with more than one queue member.

	  Reported by: Steven T. Wheeler

	  ASTERISK-18411 #close

	  Change-Id: I4956af2136ea2a7f110ac9272eae5f6e676d8f89

2017-12-12 15:28 +0000 [0c9cc7e975]  Sean Bright <sean.bright@gmail.com>

	* chan_sip: Don't send trailing \0 on keep alive packets

	  This is a partial fix for ASTERISK~25817 but does not address the
	  comments regarding RFC 5626.

	  Change-Id: I227e2d10c0035bbfa1c6e46ae2318fd1122d8420

2017-12-12 15:19 +0000 [5039b5741c]  Dwayne Hubbard

	* chan_sip: Don't crash in Dial on invalid destination

	  Stripping the DNID in a SIP dial string can result in attempting to call
	  the argument parsing macros on an empty string, causing a crash.

	  ASTERISK-26131 #close
	  Reported by: Dwayne Hubbard
	  Patches:
	  	dw-asterisk-master-dnid-crash.patch (license #6257) patch
	  	uploaded by Dwayne Hubbard

	  Change-Id: Ib84c1f740a9ec0539d582b09d847fc85ddca1c5e

2017-12-12 15:16 +0000 [6a67828b46]  Corey Farrell <git@cfware.com>

	* menuselect: Tweak check for recently run configure.

	  Recently menuselect has randomly produced an error stating that
	  configure was just run and make had to be restarted.  I believe this is
	  due to an incorrect menuselect/Makefile rule.  The original rule
	  produced an error if makeopts or autoconfig.h were older than
	  makeopts.in or autoconfig.h.in.  I believe this can create an issue if
	  makeopts is older than autoconfig.h.in or if autoconfig.h is older than
	  makeopts.in.  The new rules compare files independently.

	  Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b

2017-12-07 17:51 +0000 [22810fc635]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip/res_pjsip: Add CHANNEL(pjsip,request_uri)

	  This patch does three things associated with the initial incoming INVITE
	  request URI.

	  1) Add access to the full initial incoming INVITE request URI.

	  2) We were not setting DNID on incoming PJSIP channels.  The DNID is the
	  user portion of the initial incoming INVITE Request-URI.  The value is
	  accessed by reading CALLERID(dnid).

	  3) Fix CHANNEL(pjsip,target_uri) documentation.

	  * The initial incoming INVITE request URI is now available using
	  CHANNEL(pjsip,request_uri).

	  * Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
	  initial incoming INVITE request URI user portion.

	  * CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
	  the contact URI.

	  * Refactored print_escaped_uri() out of channel_read_pjsip() to handle
	  pjsip_uri_print() error condition when the buffer is too small.

	  ASTERISK-27478

	  Change-Id: I512e60d1f162395c946451becb37af3333337b33

2017-12-12 09:28 +0000 [ec1f4bf48d]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Add TLSv1.1 and TLSv1.2 support

	  Support for these protocols was added in the same commit as the 'proto'
	  field, so we can safely use the same ./configure check.

	  For reference: https://trac.pjsip.org/repos/changeset/4968

	  Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac

2017-12-12 08:06 +0000 [0b9d2135a9]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Assign support levels to a few modules

	  Change-Id: I51f6945c4023cb93fc7b87be5ab4c50e9e6ee27d

2017-12-09 00:35 +0000 [c01ba7437e]  Corey Farrell <git@cfware.com>

	* CLI: Fix 'core show sysinfo' function ordering.

	  Handle CLI initialization before any processing occurs.

	  Change-Id: I598b911d2e409214bbdfd0ba0882be1d602d221c

2017-12-11 15:27 +0000 [b088cddc03]  Kevin Harwell <kharwell@digium.com>

	* pjsip_options: wrongly applied "UNKNOWN" status

	  A couple of places were setting the status to "UNKNOWN" when qualifies were
	  being disabled. Instead this should be set to the "CREATED" status that
	  represents when a contact is given (uri available), but the qualify frequency
	  is set to zero so we don't know the status.

	  This patch updates the relevant places with "CREATED". It also updates the
	  "CREATED" status description (value shown in CLI/AMI/ARI output) to a value
	  of "NonQualified"/"NonQual" as this description is hopefully less confusing.

	  ASTERISK-27467

	  Change-Id: Id67509d25df92a72eb3683720ad2a95a27b50c89

2017-12-08 12:04 +0000 [c2ec82bf36]  Richard Mudgett <rmudgett@digium.com>

	* stasis_channels.c: Don't set channel snapshot caller_dnid twice.

	  Change-Id: Ib8d45bbdfbda81e65045f6dff874d189b74e5471

2017-12-11 09:45 +0000 [00578fae0a]  Sean Bright <sean.bright@gmail.com>

	* codec_opus: Make libcurl a dependency in menuselect

	  ASTERISK-27475 #close

	  Change-Id: If7384bc6ed002ef140dec69798d14c52b7cfd800

2017-12-08 12:48 +0000 [521f741b04]  Sean Bright <sean.bright@gmail.com>

	* pjsip: Improve CLI completion performance

	  Use the new ast_cli_completion_add() function to improve completion
	  performance for commands like 'pjsip show endpoint.'

	  Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348

2017-12-07 14:19 +0000 [9a9edc6c9e]  Sean Bright <sean.bright@gmail.com>

	* astdb: Improve prefix searches in astdb

	  Using the LIKE operator requires a full table scan of 'astdb', whereas a
	  comparison operation is able to use the primary key index.

	  This patch adds a new function to the AstDB API for quick prefix matches
	  and updates res_sorcery_astdb to utilize it. This showed substantial
	  performance improvement in my test environment.

	  Related to ASTERISK~26806, but does not completely resolve it.

	  Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1

2017-12-08 18:19 +0000 [d2e87b8e14]  Corey Farrell <git@cfware.com>

	* loader: Refactor resource_name_match.

	  Optimize resource_name_match.  This change eliminates use of
	  ast_strdupa, instead verifying that both basename's are the same length,
	  then using strncasecmp.

	  Change-Id: I477275c0e954c99d74be5abfc8bb6545b04e5a3d

2017-12-08 14:58 +0000 [dbb376f166]  Sean Bright <sean.bright@gmail.com>

	* pjsip_configuration: Add correct file header

	  Change-Id: I25348c386a222bb704aff07f54375108a6402906

2017-12-07 09:52 +0000 [2ffe52a116]  Sean Bright <sean.bright@gmail.com>

	* utils: Add convenience function for setting fd flags

	  There are many places in the code base where we ignore the return value
	  of fcntl() when getting/setting file descriptior flags. This patch
	  introduces a convenience function that allows setting or clearing file
	  descriptor flags and will also log an error on failure for later
	  analysis.

	  Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7

2017-12-07 19:33 +0000 [e2dbc26376]  Corey Farrell <git@cfware.com>

	* res_stasis and res_speech: Fix load order.

	  res_stasis was missing AST_MODFLAG_LOAD_ORDER.  Set res_stasis and
	  res_speech to start at (AST_MODPRI_APP_DEPEND - 1) so they are ready for
	  dependent modules.

	  Change-Id: I27f4f3810a95b6be8a5bfbf62be2ace6bfab6ff3

2017-12-07 18:22 +0000 [0e4d31eb9c]  Kevin Harwell <kharwell@digium.com>

	* pjsip_options: contacts sometimes not being updated on reload

	  For both dynamic and static contacts it was possible that potential AOR
	  changes were not being applied to all contacts. This was because the qualify
	  and schedule code was only retrieving AOR's, and contacts with frequencies
	  greater than zero.

	  For instance the following could happen: and AOR/contact has a frequency of 5,
	  it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are
	  stopped, a list of AOR's is retrieved with frequency > 0, but none are
	  selected since in this scenario all are 0. The contact for the one previously
	  set to 5 though does not get updated, so it's status remains "AVAILABLE".

	  This patch makes it so all contacts (static and dynamic) are selected, and
	  appropriately updated if need be.

	  ASTERISK-27467 #close

	  Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb

2017-12-07 18:18 +0000 [bd2218ce63]  Kevin Harwell <kharwell@digium.com>

	* pjsip_options: dynamic contact's fields not updated on reload

	  Dynamic contacts were not being properly updated on reload. As a matter of
	  fact any changes to the AOR that a dynamic contact was associated with were
	  not being applied.

	  On reload, this patch makes it so for each dynamic contact, the associated
	  AOR is now retrieved and the AOR's fields are applied to the contact.

	  ASTERISK-27467

	  Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d

2017-12-06 23:35 +0000 [c2c9995830]  Corey Farrell <git@cfware.com>

	* translate: Skip matrix_rebuild during shutdown.

	  Change-Id: I1e5eef4029cba56e33d786c5a5ade8091e531a1e

2017-12-06 14:49 +0000 [ab191e9782]  Corey Farrell <git@cfware.com>

	* sounds_index: Avoid repeatedly reindexing.

	  The sounds index is rebuilt each time a format is registered or
	  unregistered.  This causes the index to be repeatedly rebuilt during
	  startup and shutdown.

	  This patch significantly reduces the work done by delaying sound index
	  initialization until after modules are loaded.  This way a reindex only
	  occurs if a format module is loaded after startup.  We also skip
	  reindexing when format modules are unloaded during shutdown.

	  Change-Id: I585fd6ee04200612ab1490dc804f76805f89cf0a

2017-12-05 18:04 +0000 [3078b7adc2]  Richard Mudgett <rmudgett@digium.com>

	* CDR: Fix deadlock setting some CDR values.

	  Setting channel variables with the AMI Originate action caused a deadlock
	  when you set CDR(amaflags) or CDR(accountcode).  This path has the channel
	  locked when the CDR function is called.  The CDR function then
	  synchronously passes the job to a stasis thread.  The stasis handling
	  function then attempts to lock the channel.  Deadlock results.

	  * Avoid deadlock by making the CDR function handle setting amaflags and
	  accountcode directly on the channel rather than passing it off to the CDR
	  processing code under a stasis thread to do it.

	  * Made the CHANNEL function and the CDR function process amaflags the same
	  way.

	  * Fixed referencing the wrong message type in cdr_prop_write().

	  ASTERISK-27460

	  Change-Id: I5eacb47586bc0b8f8ff76a19bd92d1dc38b75e8f

2017-12-06 12:42 +0000 [2af59ebb3a]  Corey Farrell <git@cfware.com>

	* media_index: Improve startup.

	  This eliminates some wasteful operations in media_index startup.

	  * Replace statically set string-fields with char[0].
	  * Eliminate pointless RAII_VAR's.
	  * alloc_variant: Avoid pointless ao2_find on new info->variant.
	  * Stop trying find_variant before alloc_variant.
	  * process_media_file: replace ast_str with ast_asprintf.  This avoids
	    reallocation of file_id_str.

	  Overall sounds_index.c is about 27% of Asterisk startup time when using
	  sample configs.  This patch reduces it to 20%.  This is a half-fix.  The
	  real problem is that the media_index is regenerated repeatedly - 68
	  times in my test.

	  Change-Id: Ia50b752f8efb356f852b05c4be495a6631af8652

2017-12-06 07:36 +0000 [e97e41552e]  Richard Mudgett <rmudgett@digium.com>

	* bridge_basic.c: Update transfer diagnostic messages addendum.

	  * Added start DTMF transfer verbose messages.
	  * Made associated transfer messages use a similar message format.
	  * Adjusted message verbose level as requested by initial reporter.

	  ASTERISK-27449

	  Change-Id: I2045714586414b3c5ef1f3cc56c1c4af4b31f551

2017-11-29 06:21 +0000 [9d00583164]  Niklas Larsson <niklas@tese.se>

	* bridge_basic.c: Update transfer diagnostic messages.

	  * Add the channel name to diagnostic messages so you will know which
	  channel failed to transfer.

	  * Promoted some debug messages to verbose 4 messages.

	  ASTERISK-27449 #close

	  Change-Id: Idac66b7628c99379cc9269158377fd87dc97a880

2017-12-01 13:54 +0000 [8536a09b86]  Richard Mudgett <rmudgett@digium.com>

	* security-events: Fix SuccessfulAuth using_password declaration.

	  The SuccessfulAuth using_password field was declared as a pointer to a
	  uint32_t when the field was later read as a uint32_t value.  This resulted
	  in unnecessary casts and a non-portable field value reinterpret in
	  main/security_events.c:add_json_object().  i.e., It would work on a 32 bit
	  architecture but not on a 64 bit big endian architecture.

	  Change-Id: Ia08bc797613a62f07e5473425f9ccd8d77c80935

2017-11-30 12:50 +0000 [ab63448fa6]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Increase strictrtp learning timeout time.

	  More complicated direct media reinvite negotiations can result in longer
	  delays before direct media flows.  The strictrtp learning timeout time
	  was too short.  One log showed that the first RTP packet came in just
	  after three seconds.

	  * Increase the strictrtp learning timeout time from 1.5 to 5 seconds.

	  ASTERISK-27453

	  Change-Id: Ic5e711164cbb91b4d1c1e40c83697755640f138c

2017-12-04 08:33 +0000 [e0354bbe82]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: Correct default in sample configuration file.

	  With Asterisk 12 (commit 866d968), the default of "icesupport" changed to
	  - "yes" in the module "res_rtp_asterisk" and
	  - "no" in the module "chan_sip".
	  The latter was reflected in the sample configuration file for "sip.conf". The
	  former did not make it into "rtp.conf.sample".

	  ASTERISK-20643

	  Change-Id: I2a2e0a900455d0767a99ea576e30adc6d7608a36

2017-12-04 05:27 +0000 [b2c4e8660a]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Peers with distinct source ports don't match, regardless of transport.

	  Previously, peers connected via TCP (or TLS) were matched by ignoring their
	  source port. One cannot say anything when protocol:IP:port match, yes (see
	  <http://stackoverflow.com/q/3329641>). However, when the ports do not match, the
	  peers do not match as well.

	  This change allows two peers connected to an Asterisk server via TCP (or TLS)
	  behind a NAT (= same source IP address) to be differentiated via their port as
	  well.

	  ASTERISK-27457
	  Reported by: Stephane Chazelas

	  Change-Id: Id190428bf1d931f2dbfd4b293f53ff8f20d98efa

2017-12-04 03:40 +0000 [0611fe581c]  Sungtae Kim <pchero21@gmail.com>

	* Add new object for VoicemailUserEntry

	  Currently, when the app_voicemail sending VoicemailUserEntry AMI event, there's
	  no OldMessageCount info for default.
	  To check the OldMessageCount info, it required IMAP_STORAGE define, but this is
	  not correct.
	  Added OldMessageCount item as a default.

	  ASTERISK-27456

	  Change-Id: I5c71521c2d1daf8b7b161e31c34d28cca6aea4c7

2017-12-03 18:49 +0000 [e2715d2cd4]  Joshua Colp <jcolp@digium.com>

	* pjproject: Clean up disabling of WebRTC support.

	  The definition in config_site.h and the argument to the
	  configure script are not necessary to disable WebRTC
	  support. The correct argument, --disable-libwebrtc, is
	  already passed.

	  ASTERISK-26980

	  Change-Id: I27da2c894f87914956a72710222e17462d8a44bc

2017-12-02 15:55 +0000 [39939cecfa]  Corey Farrell <git@cfware.com>

	* autoconf: Remove use of m4_ifblank.

	  The m4_ifblank macro is not available on CentOS 6, reverse conditionals
	  to allow use of m4_ifval instead.  ./bootstrap.sh was run but this patch
	  does not result in any difference to the generated configure script.

	  Change-Id: I280785deb872ed8d3339d99cce63a2b54d5f1438

2017-11-30 14:38 +0000 [075faac2fd]  George Joseph <gjoseph@digium.com>

	* AST-2017-013: chan_skinny: Call pthread_detach when sess threads end

	  chan_skinny creates a new thread for each new session.  In trying
	  to be a good cleanup citizen, the threads are joinable and the
	  unload_module function does a pthread_cancel() and a pthread_join()
	  on any sessions that are active at that time.  This has an
	  unintended side effect though. Since you can call pthread_join on a
	  thread that's already terminated, pthreads keeps the thread's
	  storage around until you explicitly call pthread_join (or
	  pthread_detach()).   Since only the module_unload function was
	  calling pthread_join, and even then only on the ones active at the
	  tme, the storage for every thread/session ever created sticks
	  around until asterisk exits.

	  * A thread can detach itself so the session_destroy() function
	    now calls pthread_detach() just before it frees the session
	    memory allocation.  The module_unload function still takes care
	    of the ones that are still active should the module be unloaded.

	  ASTERISK-27452
	  Reported by: Juan Sacco

	  Change-Id: I9af7268eba14bf76960566f891320f97b974e6dd
	  (cherry picked from commit 8f5dff543e457ee3450d21e741901609af0cd779)

2017-12-01 10:01 +0000 [d9fdeae6a4]  Sean Bright <sean.bright@gmail.com>

	* config: Speed up config template lookup

	  ast_category_get() has an (undocumented) implementation detail where it
	  tries to match the category name first by an explicit pointer comparison
	  and if that fails falls back to a normal match.

	  When initially building an ast_config during ast_config_load, this
	  pointer comparison can never succeed, but we will end up iterating all
	  categories twice. As the number of categories using a template
	  increases, this dual looping becomes quite expensive. So we pass a flag
	  to category_get_sep() indicating if a pointer match is even possible
	  before trying to do so, saving us a full pass over the list of current
	  categories.

	  In my tests, loading a file with 3 template categories and 12000
	  additional categories that use those 3 templates (this file configures
	  4000 PJSIP endpoints with AOR & Auth) takes 1.2 seconds. After this
	  change, that drops to 22ms.

	  Change-Id: I59b95f288e11eb6bb34f31ce4cc772136b275e4a

2017-12-01 08:29 +0000 [1ad0fbc80e]  Sean Bright <sean.bright@gmail.com>

	* config: Speed up ACO & sorcery initialization

	  When starting Asterisk in the foreground, there is a perceptible delay
	  when loading modules that use the ACO and sorcery config frameworks.
	  For example, a lightly configured res_pjsip took 853ms to load on my
	  VM.

	  I tracked down the slowness to the XPath queries used to associate the
	  relevant documentation with the config options. One improvement was
	  adding a call to xmlXPathOrderDocElems after loading an XML document.
	  From the libxml2 docs:

	    Call this routine to speed up XPath computation on static documents.

	  The second change was to remove recursive descent and wildcard
	  operators from the XPath queries. After these changes, res_pjsip takes
	  85ms to load on my VM and there is no longer a perceptible delay when
	  starting Asterisk in the foreground.

	  Change-Id: I45d457f1580e26bf5a2b0dab16e8e9ae46dcbd82

2017-12-01 06:07 +0000 [892df22ccd]  Joshua Colp <jcolp@digium.com>

	* res_http_post: Not all versions of gmime have GMIME_MAJOR_VERSION.

	  This change makes the presence of the GMIME_MAJOR_VERSION
	  definition optional, as not all versions of gmime actually
	  define it.

	  ASTERISK-27454

	  Change-Id: I01d99590045971ed6787899147170a5954077238

2017-11-30 21:24 +0000 [35a7036a0d]  Corey Farrell <git@cfware.com>

	* README-SERIOUSLY.bestpractices.txt: Convert to markdown

	  Follow-up to conversion of README.md.

	  Change-Id: I17ee7cf25bc027ece844efa2c1dfe613aff1e35b

2017-11-17 10:38 +0000 [ce5cfc8ffb]  Corey Farrell <git@cfware.com>

	* autoconf: Use m4 conditionals where possible.

	  Change-Id: I530c0a72f965437acef6a9a4fbfe5c487f078b65

2017-11-17 09:15 +0000 [87a57e8d46]  Corey Farrell <git@cfware.com>

	* autoconf: Fix call to AC_CONFIG_AUX_DIR.

	  The `pwd` parameter to AC_CONFIG_AUX_DIR is unnecessary, the default
	  value is $srcdir.

	  Additionally remove the AC_REVISION call.  It only added a comment and
	  is pointless without SVN tag replacements.

	  Change-Id: I99299a3217f095bddcb2edefb3b9af0ab147bc29

2017-11-20 16:58 +0000 [d12a2ab400]  Corey Farrell <git@cfware.com>

	* CLI: Remove compatibility code.

	  Previous commits maintained compatibility with older remote console
	  clients as well as maintaining all API's.

	  Remove the following compatibility code:
	  * ast_cli_generatornummatches.
	  * Remote command "_command nummatches".
	  * Sorting / duplicate removal by remote console.

	  Change-Id: I59e6ce94fa57ae564888442049695f7e46746437

2017-11-26 11:47 +0000 [58115e9c21]  Alexander Traud <pabstraud@compuserve.com>

	* translate: Transcode siren14, speex32, silk24, and silk12 via slin16.

	  When a format has no pre-recorded sound files, Asterisk has to transcode between
	  formats. For this, Asterisk has a fixed translation table. If the pre-recorded
	  sound files are not available in the same sample rate, Asterisk has not only to
	  transcode but also to resample.

	  Asterisk has pre-recorded files for SLN (8000 kHz) and SLN16 (16000 kHz).
	  However before this change, Asterisk did not take the sample rate into account,
	  because the translation paths to SLN and SLN16 got the same score/weight in the
	  table. Consequently, you might have got narrow-band audio with siren14, speex32,
	  silk24, and silk12 although those are (ultra) wide-band audio codecs.

	  With this change, the distance in sample-rates is taken into account. Now on the
	  Command-Line interface (CLI) 'core show channels', you should see:
	  (slin@16000)->(slin@32000)->(speex@32000).

	  ASTERISK-23735
	  Reported by: Richard Kenner

	  Change-Id: I9448295c1978be26f8633b6066395e7bbbe2e213

2017-11-26 09:44 +0000 [55c4d8e008]  Richard Mudgett <rmudgett@digium.com>

	* res_ari: Fix inverted test giving wrong error message.

	  The patch for ASTERISK_24560 inverted a test checking if the bridge name
	  is being updated to a different name.

	  * Fix the test to return "Changing bridge name is not implemented" when
	  someone attempts to change the bridge name.

	  ASTERISK-27445

	  Change-Id: I4b70bf08b0e02e016108b077ff75b345dec12fc9

2017-11-25 04:09 +0000 [74e7005a74]  Alexander Traud <pabstraud@compuserve.com>

	* translate: Show sample rate for silk, speex, and slin in translation table.

	  ASTERISK-24662

	  Change-Id: I3822956984292c99c48bca8e97807e498ccc0e88

2017-11-23 13:27 +0000 [02a9952709]  Richard Mudgett <rmudgett@digium.com>

	* features.conf.sample: Clarify ActivatedBy documentation wording.

	  Change-Id: Id2899331fe05d1909a862ea879742879d086bc64

2017-11-22 18:37 +0000 [4b1262c94b]  Corey Farrell <git@cfware.com>

	* Add defaultbranch to .gitreview.

	  Although the default value of defaultbranch is master I'm adding it
	  anyways.  This way when new major branches are being created the value
	  can be updated instead of having to remember the name of the key.

	  Change-Id: I3db009217c5ae399fb84bee95076f4dbb7fa52d2

2017-11-22 18:43 +0000 [fcd9ba2b87]  Alexander Anikin <may213@yandex.ru>

	* add cmd connection creation on creation ooh323 call data structure

	  ASTERISK-27353 #close

	  Reported by: Marco Giordani

	  Change-Id: I455096bd7da016b871afe09af86067c2c7c9f33f

2017-11-22 10:42 +0000 [db21f7f2e1]  Kevin Harwell <kharwell@digium.com>

	* pjsip: 183 without To tag does not negotiate media

	  If a 183 with sdp response is receive without a To tag the sdp is not
	  negotiated. According to RFC 3261 section 12.1.2 while a To tag is required,
	  the client needs to still be able to handle the missing tag case for
	  backwards compatibility.

	  This patch, accepted by and applied to pjproject, makes it so if an incoming
	  180/183 with SDP comes in without a To tag it gets appropriately handled.

	  ASTERISK-27442 #close

	  Change-Id: Ic9d6b01e05e8f4874eebbd7adfe05d932025d203

2017-11-21 06:39 +0000 [1a349d832d]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: ICE server-reflexive candidates (srflx) with Dual-Stack.

	  Previously, Asterisk sent srflx only when configured exclusively for IPv4. Now,
	  srflx is gathered and sent via SDP, even when Asterisk is enabled for
	  Dual Stack (IPv4+IPv6) and an IPv4 interface is available/used.

	  ASTERISK-27437

	  Change-Id: Ie07d8e2bfa7b6fe06fcdc73d390a7a9a4d8c0bc1

2017-11-20 13:05 +0000 [8e1506154f]  Corey Farrell <git@cfware.com>

	* res_parking: Set load_pri more appropriately.

	  res_parking had an inplicit load_pri of 0 meaning it was one of the very
	  first modules loaded after modules with global symbols.  Set it to
	  AST_MODPRI_DEVSTATE_PROVIDER as it provides device state for parking
	  lots.

	  Change-Id: I297b6fb3ff6993ec004e667b22a74f5925906259

2017-11-17 21:33 +0000 [90f9885f73]  Corey Farrell <git@cfware.com>

	* README: Convert to README.md.

	  Convert the README file to markdown format, remove the old README.  This
	  causes websites like github to display the README in a much nicer
	  format with live links.  The raw file is still very readable from
	  plain text editors and terminals.

	  Change-Id: I7d13131764a9a9026e5f8a6ddb245a01bbd788e7

2017-11-20 16:48 +0000 [b79d04f8f8]  Corey Farrell <git@cfware.com>

	* CLI: Finish conversion of completion handling to vectors.

	  Change-Id: Ib81318f4ee52a5e73b003316e13fe9be1dd897a1

2017-11-07 15:34 +0000 [fbb8c0d3e4]  Corey Farrell <git@cfware.com>

	* CLI: Refactor cli_complete.

	  * Stop using "_COMMAND NUMMATCHES" on remote consoles.  Using this
	    command had doubled the amount of work needed from the Asterisk
	    daemon for each completion request.
	  * Fix code formatting.
	  * Remove static buffer used to send the command, use the same buffer
	    that will receive the results.
	  * Move sort from ast_cli_display_match_list.

	  Change-Id: Ie2211b519a3d4bec45bf46e0095bdd01d384cb69

2017-11-07 14:13 +0000 [1cd24cd726]  Corey Farrell <git@cfware.com>

	* CLI: Rewrite ast_el_strtoarr to use vector's internally.

	  This rewrites ast_el_strtoarr to use vector's internally, but still
	  return the original NULL terminated array of strings.

	  Change-Id: Ibfe776cbe14f750effa9ca360930acaccc02e957

2017-11-07 14:47 +0000 [9c0a2110f0]  Corey Farrell <git@cfware.com>

	* CLI: Refactor ast_cli_display_match_list.

	  * Stop estimating line count, just print until we run out of matches.
	  * Stop freeing entries, the caller does that anyways.
	  * Stop calculating / returning numoutput, it was ignored.

	  Change-Id: I7f92afa8bea92241a95227587367424c8c32a5cb

2017-11-08 23:42 +0000 [9587a61f4c]  Corey Farrell <git@cfware.com>

	* CLI: Create ast_cli_completion_add function.

	  Some completion generators are very inefficent due to the way CLI
	  requests matches one at a time.  ast_cli_completion_add can be called
	  multiple times during one invokation of a CLI generator to add all
	  results without having to reinitialize the search state for each match.

	  Change-Id: I73d26d270bbbe1e3e6390799cfc1b639e39cceec

2017-11-09 00:39 +0000 [a02cbc2ef3]  Corey Farrell <git@cfware.com>

	* CLI: Remove calls to ast_cli_generator.

	  The ability to add to localized storage cannot be supported by
	  ast_cli_generator.  The only calls to ast_cli_generator should be by
	  functions that need to proxy the CLI generator, for example 'cli check
	  permissions' or 'core show help'.

	  * ast_cli_generatornummatches now retrieves the vector of matches and
	    reports the number of elements (not including 'best' match).
	  * test_substitution retrieves and iterates the vector.

	  Change-Id: I8cd6b93905363cf7a33a2d2b0e2a8f8446d9f248

2017-11-20 09:13 +0000 [491e2eba0d]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: ICE contained square brackets around IPv6 addresses.

	  ASTERISK-27434

	  Change-Id: Iaeed89b4fa05d94c5f0ec2d3b7cd6e93d2d5a8f7

2017-11-19 21:23 +0000 [10b4b5d200]  Corey Farrell <git@cfware.com>

	* loader: Fix comments in struct ast_module.

	  Make the comments follow doxygen format, move comments to the line
	  before each field they describe.

	  Change-Id: Ic445468398b5e88f13910f7c2f70bd15aad33a27

2017-11-16 17:25 +0000 [9ae805c900]  Corey Farrell <git@cfware.com>

	* cli: Remove silly usage of RAII_VAR.

	  Change-Id: I81aacfee7cd26e4fc5eef07bca582700c2975bd7

2017-11-16 13:19 +0000 [89ccab95c2]  Corey Farrell <git@cfware.com>

	* ccss: Remove silly usage of RAII_VAR.

	  Change-Id: I5ce40035e0a940e4e56f6322c1dcd47fbd509b98

2017-11-16 12:51 +0000 [5e99c334d1]  Corey Farrell <git@cfware.com>

	* app: Remove silly usage of RAII_VAR.

	  Change-Id: Ideb594f7aae134974fb78d5477ba0853b97b8625

2017-11-16 12:19 +0000 [abdd9fa1a8]  Corey Farrell <git@cfware.com>

	* aoc: Remove silly usage of RAII_VAR.

	  Change-Id: I07907f833b81aeb0128bc9442a2abb52679c7511

2017-11-16 12:55 +0000 [48e1b39b28]  Corey Farrell <git@cfware.com>

	* abstract_jb: Remove silly usage of RAII_VAR.

	  Change-Id: I9d56175369363d1dc735504cf78a3a5577069f49

2017-11-20 13:08 +0000 [d6bbcec571]  Corey Farrell <git@cfware.com>

	* res_mwi_external_ami: Remove incorrect load priority.

	  res_mwi_external_ami specified AST_MODFLAG_LOAD_ORDER but didn't set
	  load_pri, resulting in an actual load priority of 0.  This module only
	  provides AMI actions so it has no reason to load early.

	  Change-Id: I82987fcf10d3ea42716b2f9df915b16687fd5839

2017-11-20 12:54 +0000 [58fa3885cc]  Corey Farrell <git@cfware.com>

	* Loader: Remove unneeded load_pri declarations.

	  Instead of specifying AST_MODFLAG_LOAD_ORDER with load_pri
	  AST_MODPRI_DEFAULT just use AST_MODFLAG_DEFAULT.

	  Change-Id: I0123258eafce324249433a69df15a85cc16e509f

2017-11-20 09:49 +0000 [7397961b02]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: pjsip_evsub_set_uas_timeout was not used.

	  ASTERISK-27435

	  Change-Id: Id318a7ae6d7d69b53f911d30bf3eece64852f15c

2017-11-19 09:57 +0000 [b4f7f8250f]  Corey Farrell <git@cfware.com>

	* Build: Fix OSX build issues.

	  OSX does not support 'readlink -f' or 'sed -r'.  Replace readlink with
	  the GNU make macro 'realpath'.  Replace sed with grep in one place, cut
	  in the other.

	  ASTERISK-27332

	  Change-Id: I5d34ecca905384decb22ead45c913ae5e8aff748

2017-11-19 13:52 +0000 [999e0c17d7]  Corey Farrell <git@cfware.com>

	* Build: Fix issues building without SSL.

	  * Fix conditional in libasteriskssl.
	  * Use variables produced by configure to link the SSL and uuid libraries
	    into libasteriskpj.so instead of hard-coding them.

	  ASTERISK-27431

	  Change-Id: I3977931fd3ef8c4e4376349ccddb354eb839b58d

2017-11-19 13:28 +0000 [53f42cc052]  Corey Farrell <git@cfware.com>

	* res_pjsip: Fix warning by deferring implicit type cast.

	  Mac doesn't like the comparison of -1 to an enum, so store the result of
	  ast_sip_str_to_dtmf to an int so we can check for the negative return
	  value.  ast_sip_str_to_dtmf returns an int so this is only delaying the
	  implicit type cast.

	  Change-Id: I0c262c1719ee951aae1f437d733a301cf5f8ad29

2017-11-18 21:13 +0000 [75cb403775]  Corey Farrell <git@cfware.com>

	* tests: Fix warnings found on Mac.

	  test_pbx used raise without explicitly including signal.h.  On Mac for
	  some reason nothing else includes it.

	  test_logger checked if an unsigned int was negative.  Switch the
	  variable to 'int' so that error check can be effective.

	  Change-Id: Ie1db5dd1818ac25cc2ae41b644f848b5865b1362

2017-11-18 20:25 +0000 [83a2c4d2ae]  Corey Farrell <git@cfware.com>

	* res_snmp: Declare RONLY if net-snmp headers do not.

	  Some net-snmp builds do not provide the RONLY declare, only
	  NETSNMP_OLDAPI_RONLY.  Map RONLY to NETSNMP_OLDAPI_RONLY to get around
	  this error.

	  Change-Id: Ida5c7ad9406515825485c4d3b4a34fd6ad0da577

2017-11-18 20:02 +0000 [5a899fc503]  Corey Farrell <git@cfware.com>

	* res_fax: Remove checks for unsigned values being >= 0.

	  It's impossible for gwtimeout or fdtimeout to be less than 0 because
	  they are unsigned int's.  Remove checks and unreachable branches.

	  Change-Id: Ib2286960621e6ee245e40013c84986143302bc78

2017-11-18 19:50 +0000 [b4862e463c]  Corey Farrell <git@cfware.com>

	* iostream: Fix ast_iostream_printf declaration.

	  This adds the printf attribute and changes 'fmt' from 'const void *' to
	  'const char *'.  This resolves a warning from some compiler for
	  vsnprintf needing a literal string for format.

	  Change-Id: I71c33a8262590042ee451e1146760c10bb22fb78

2017-11-18 19:29 +0000 [2fab3aacd6]  Corey Farrell <git@cfware.com>

	* app_minivm: Fix possible uninitialized return value.

	  Declare 'res' initialized to -1 to deal with earlier error paths that
	  could cause 'res' to be returned uninitialized.

	  Change-Id: I8ac2a5755bf4174d89ef893e924c940f702b104e

2017-11-16 02:47 +0000 [0ca406c202]  Pirmin Walthert <infos@nappsoft.ch>

	* res_rtp_asterisk.c: Fix rtp source address learning for broken clients

	  Some clients do not send rtp packets every ptime ms. This can lead to
	  situations in which the rtp source learning algorithm will never learn
	  the address of the client. This has been discovered on a Mac mini with
	  a pjsip based softphone after updating to Sierra: as soon as USB
	  headsets are involved, the softphone will send the second packet 30ms
	  after the first, the third 30ms after the second and the fourth 1ms
	  after the third. So in the old implmentation the rtp source learning
	  algorithm was repeatedly reset on the fourth packet.

	  The patch changes the algorithm in a way that doesn't take the arrival
	  time between two consecutive packets into account but the time between
	  the first and the last packet of a learning sequence.

	  The patch also fixes a second problem: when a user was using a wrong
	  value for the probation setting there was a LOG_WARNING output stating
	  that the value had been set to the default value instead. However
	  the code for setting the value back to defaults was missing.

	  ASTERISK-27421 #close

	  Change-Id: If778fe07678a6fd2041eaca7cd78267d0ef4fc6c

2017-11-17 19:36 +0000 [9316a064fd]  Corey Farrell <git@cfware.com>

	* README: Send people to secure websites where available.

	  We should be sending people to secure web URL's where available.
	  Update README's and docs.

	  Change-Id: Id5b1e049b0b18b49a784f1254605aefa244ce19a

2017-11-17 19:54 +0000 [5d0529c4d9]  Corey Farrell <git@cfware.com>

	* doxygen: Remove obsolete contents.

	  Remove doxygen contents that have nothing to do with the current state
	  of Asterisk.

	  Change-Id: Ic072cc8641f9533a202990ccf275ce87e3efd95c

2017-11-17 09:57 +0000 [1b6e4c1175]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Use reasonable buffer lengths for endpoint identification

	  Domains themselves can be up to 255 characters long (per RFC 1035), so
	  our current buffer sizes are wholly inadequate for many use cases.

	  Change-Id: If3f30a68307f1365a1fe06bc4b854c62842c9292

2017-11-11 10:09 +0000 [b9f4bb5988]  Corey Farrell <git@cfware.com>

	* menuselect: Remove ineffective weak attribute detection.

	  menuselect detects compiler support for multiple styles of weak
	  functions.  This is a remnant from 2013 when OPTIONAL_API required weak
	  functions.  It is no longer correct for menuselect to switch
	  dependencies from optional to required based on lack of weak function
	  support.

	  Note an issue remains - dependencies should switch from optional to
	  required based on OPTIONAL_API being enabled or disabled.  I don't think
	  this is possible.  menuselect needs to know at startup if OPTIONAL_API
	  is enabled or disabled, so the only way to fix this is to remove
	  OPTIONAL_API from menuselect and create a configure option.  I've left
	  the code that switches in place but it's preprocessed out.

	  Additionally removed:
	  - WEAKREF variable from Asterisk makeopts.in.
	  - Related disabled code from test_utils.
	  - Pointless AC_REVISION call from menuselect/configure.ac.

	  Change-Id: Ifa702e5f98eb45f338b2f131a93354632a8fb389

2017-11-16 09:48 +0000 [c4f11911ea]  Corey Farrell <git@cfware.com>

	* acl: Fix allocation related issues.

	  Add checks for allocation errors, cleanup and report failure when they
	  occur.

	  * ast_duplicate_acl_list: Replace log warnings with errors, add missing
	    line-feed.
	  * ast_append_acl: Add missing line-feed to logger message.
	  * ast_append_ha: Avoid ast_strdupa in loop by moving debug message to
	    separate function.
	  * ast_ha_join: Use two separate calls to ast_str_append to avoid using
	    ast_strdupa in a loop.

	  Change-Id: Ia19eaaeb0b139ff7ce7b971c7550e85c8b78ab76

2017-11-16 09:04 +0000 [781a520b73]  Joshua Colp <jcolp@digium.com>

	* bridge_basic: Ignore answer from transfer target when they've timed out.

	  This is a fun one.

	  Given the following attended transfer scenario:

	  1. Transfer target is called
	  2. Transferer hangs up
	  3. Transfer target call attempt reaches timeout
	  4. Transfer target is told to hang up
	  5. Transfer target answers before channel is hung up
	  6. Transferer recall target is called

	  A crash would occur. This is because the transfer target call
	  attempt, despite being told to hang up, would raise a recall
	  target answer before the recall target had been answered. As it
	  had not answered there would be no recall target channel and it
	  would implode.

	  This change makes it so that if the transfer target has been
	  hung up we don't tell the attended transfer code that it has
	  answered. We also clear out the stimulus that the recall target
	  has been answered after telling the transfer target to hang up,
	  in case it was able to raise the information before we told it
	  to hangup.

	  ASTERISK-27361

	  Change-Id: Ifb8b255a9c4d2c5c1b8ad77bf54f659ed286df99

2017-11-16 19:39 +0000 [a95f2994c6]  Corey Farrell <git@cfware.com>

	* aoc: Fix memory management issues.

	  aoc_publish_blob failed to check for msg allocation error and never
	  released msg.

	  Change-Id: Ib31a9ffb81056a0d496a49d7eec795005a44bcd5

2017-11-16 16:18 +0000 [7a735d45e2]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_transport_websocket: Give transport a meaningful description

	  We were not \0 terminating this string, so any attempt to print it would
	  in the best case show an empty string and in the worst case potentially
	  crash.

	  Change-Id: I63d96ef8f7516ac02a0f91e22dfa8acdc615042c

2017-11-16 15:00 +0000 [6c53fb5d21]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Use sorcery prefix operation for contact lookup

	  This improves performance for registrations assuming that
	  res_config_astdb is not in use.

	  Change-Id: I86f37aa9ef07a4fe63448cb881bbadd996834bb1

2017-10-19 14:44 +0000 [d995064fb7]  Nir Simionovich <nirs@greenfieldtech.net>

	* This patch adds a beanstalk CEL backend.

	  Beanstalkd is a simple to use job queue. It provides a means to
	  create multiple job queues called "tubes". Each tube can store
	  multiple jobs, with varying priorities with the queue. Queue
	  processing is available via a simple TCP socket or via well defined
	  libraries, avaialble at
	  https://github.com/kr/beanstalkd/wiki/client-libraries

	  This module is based upon the beanstalk-client library, available
	  for download at: https://github.com/deepfryed/beanstalk-client

	  This module currently doesn't support user defined events.

	  Change-Id: Ic3a087faeeac045d69a2a018e60e29831ddb95ab

2017-11-09 19:58 +0000 [e793501084]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip.c: Improve answer failure log messages.

	  * Balanced the session->inv_session refs on answer failure.

	  Change-Id: I33542d639d37e692cb46550b972a5fcfc3b804b8

2017-11-14 18:00 +0000 [b7b800b689]  Richard Mudgett <rmudgett@digium.com>

	* audiohook.c: Fix freeing a frame and still using it.

	  Memory corruption happened to the media frame caches when an audio hook
	  freed a frame when it shouldn't.  I think the freed frame was because a
	  jitter buffer interpolated a missing frame and the audio hook
	  unconditionally freed it.

	  * Made audiohook.c:audio_audiohook_write_list() not free an interpolated
	  frame if it is the same frame as what was passed into the routine.

	  * Made plc.c:normalise_history() use memmove() instead of memcpy() on a
	  memory block that could overlap.  Found by valgrind investigating this
	  issue.

	  ASTERISK-27238
	  ASTERISK-27412

	  Change-Id: I548d86894281fc4529aefeb9f161f2131ecc6fde

2017-11-15 12:10 +0000 [f512707362]  George Joseph <gjoseph@digium.com>

	* app_record:  Don't set RECORD_STATUS chan var until file is closed

	  We've been calling pbx_builtin_setvar_helper to set the
	  RECORD_STATUS variable before actually closing the recorded file.
	  If a client is watching VarSet events and tries to do something with
	  the file when a RECORD_STATUS event is seen, they might attempt to
	  do so while the file it's still open.

	  We now delay calling pbx_builtin_setvar_helper until after we close
	  the file.

	  ASTERISK-27423

	  Change-Id: I7fe9de99953e46b4bafa2b38cf151fe8f6488254

2017-11-07 08:25 +0000 [cf1cb3345e]  George Joseph <gjoseph@digium.com>

	* ast_coredumper:  Add ability to use directory other than /tmp

	  The OUTPUTDIR environment variable can now be set either in the
	  environment itself or in ast_debug_tools.conf.  If set, it's used
	  for all work products instead of /tmp.

	  Also added the --tarball-config option that includes the contents
	  of /etc/asterisk when either --tarball-coredumps or --tarball-results
	  are used.

	  Change-Id: I66b2553319df61caea5b313d084f51978f730b4c

2017-11-13 07:14 +0000 [29e0add14f]  Joshua Colp <jcolp@digium.com>

	* pjsip / hep: Provide correct local address for Websockets.

	  Previously for PJSIP the local address of WebSocket connections
	  was set to the remote address. For logging purposes this is
	  not particularly useful.

	  The WebSocket API has been extended to allow the local
	  address to be queried and this is used in PJSIP to set the
	  local address to the correct value.

	  The PJSIP HEP support has also been tweaked so that reliable
	  transports always use the local address on the transport
	  and do not try to (wrongly) guess. As they are connection
	  based it is impossible for the source to be anything else.

	  ASTERISK-26758
	  ASTERISK-27363

	  Change-Id: Icd305fd038ad755e2682ab2786e381f6bf29e8ca

2017-11-13 17:47 +0000 [14253f9535]  Corey Farrell <git@cfware.com>

	* alertpipe: Correct documented return of ast_alertpipe_write.

	  Change-Id: I4ea49c441890a81384144479dc93ab5a3989486d

2017-11-09 19:47 +0000 [edd1016dd8]  Corey Farrell <git@cfware.com>

	* core: Use ast_alertpipe for Asterisk signal monitoring thread.

	  Reduce the signal monitoring thread file descriptor use from two to one
	  on systems that support eventfd.

	  Change-Id: Id4041a237d481ff699639e153ea6982fee14a462

2017-11-13 16:20 +0000 [cdaaa14a5f]  Corey Farrell <git@cfware.com>

	* core: Fix configuration of remote console socket path.

	  The remote console socket path is the combination of asterisk.conf
	  settings astrundir from [directories] and astctl from [files].
	  Unconditionally combine the two strings after processing all values
	  to ensure we end up with the correct socket path.

	  ASTERISK-27415

	  Change-Id: Ib1e2805d55d6b0955c6430a1a2a93acbf9b091e8

2017-11-10 10:37 +0000 [f6ebd16bb8]  George Joseph <gjoseph@digium.com>

	* bundled_pjproject: sip_parser:  Fix return code in pjsip_find_msg

	  The default return code for pjsip_find_msg was PJ_SUCCESS so if
	  a Content-Length header wasn't found at all, pjsip_find_msg was
	  returning PJ_SUCCESS instead of PJSIP_EMISSINGHDR.

	  Also added the volatile keyword to a few variables that are used
	  both inside and outside the PJ_TRY/PJ_CATCH block.

	  Partial fix for ASTERISK_27408

	  Change-Id: If82ba9de921e3d57df9c68cf96ee45ccc1491f7a

2017-11-13 14:35 +0000 [2e7f6cd31b]  Ben Ford <bford@digium.com>

	* bundled_pjproject: Update to 2.7.1

	  Update from 2.7 to 2.7.1 for bundled pjproject. Changed version
	  and removed patch files included in the update.

	  Change-Id: I55cea8e734b318c2df9daf86aa0802c559ec8357

2017-11-09 08:21 +0000 [ffccce76d9]  Sean Bright <sean.bright@gmail.com>

	* sorcery: Add ast_sorcery_retrieve_by_prefix()

	  Some consumers of the sorcery API use ast_sorcery_retrieve_by_regex
	  only so that they can anchor the potential match as a prefix and not
	  because they truly need regular expressions.

	  Rather than using regular expressions for simple prefix lookups, add
	  a new operation - ast_sorcery_retrieve_by_prefix - that does them.

	  Change-Id: I56f4e20ba1154bd52281f995c27a429a854f6a79

2017-11-07 17:07 +0000 [14d60cee0c]  Corey Farrell <git@cfware.com>

	* CLI: Create ast_cli_completion_vector.

	  This is a rewrite of ast_cli_completion_matches using a vector to build
	  the list.  The original function calls the vector version, NULL
	  terminates the vector and extracts the elements array.

	  One change in behavior the results are now sorted and deduplicated. This
	  will solve bugs where some duplicate checking was done before the list
	  was sorted.

	  Change-Id: Iede20c5b4d965fa5ec71fda136ce9425eeb69519

2017-11-07 14:00 +0000 [4930404715]  Corey Farrell <git@cfware.com>

	* vectors: Add new macro and a string vector definition.

	  * AST_VECTOR_STEAL_ELEMENTS - steal the array of elements for use
	    with non-vector code.
	  * struct ast_vector_string - a vector of 'char *'.

	  Change-Id: I104d1b204be03fccf67e02a195596adcb5ab1e42

2017-11-11 13:01 +0000 [90bb0a3e10]  Richard Mudgett <rmudgett@digium.com>

	* core: Add cache_media_frames debugging option.

	  The media frame cache gets in the way of finding use after free errors of
	  media frames.  Tools like valgrind and MALLOC_DEBUG don't know when a
	  frame is released because it gets put into the cache instead of being
	  freed.

	  * Added the "cache_media_frames" option to asterisk.conf.  Disabling the
	  option helps track down media frame mismanagement when using valgrind or
	  MALLOC_DEBUG.  The cache gets in the way of determining if the frame is
	  used after free and who freed it.  NOTE: This option has no effect when
	  Asterisk is compiled with the LOW_MEMORY compile time option enabled
	  because the cache code does not exist.

	  To disable the media frame cache simply disable the cache_media_frames
	  option in asterisk.conf and restart Asterisk.

	  Sample asterisk.conf setting:
	  [options]
	  cache_media_frames=no

	  ASTERISK-27413

	  Change-Id: I0ab2ce0f4547cccf2eb214901835c2d951b78c00

2017-11-11 09:42 +0000 [b865d29f1c]  Richard Mudgett <rmudgett@digium.com>

	* frame.c: Make ast_frame_free()/ast_frfree() NULL tolerant

	  Change-Id: Ic49d821ef88ada38a31bdd835b9531443c55d793

2017-11-10 22:04 +0000 [96987737b9]  Corey Farrell <git@cfware.com>

	* menuselect: Delete and ignore aclocal.m4.

	  This file is temporary output from the bootstrap.sh command, it does not
	  need to be committed.

	  Change-Id: Ie0fd113aff6eac44924c0bd0c900833c6c86a6d9

2017-10-30 22:09 +0000 [e9f8b317c3]  Corey Farrell <git@cfware.com>

	* Build: Make function constructor/destructor attributes mandatory.

	  This change causes the configure script to fail if the C compiler does
	  not support both function attributes constructor and destructor.  These
	  were already required as modules cannot function without these attributes
	  and Asterisk requires modules.

	  This also has AST_GCC_ATTRIBUTE set a variable
	  ax_cv_have_func_attribute_$1.  This is the same variable name used by
	  autoconf-archive's AX_GCC_FUNC_ATTRIBUTE, used for the same purpose.

	  Change-Id: Id68e8a1447f2a6d707c54b56350e7bfdb33fb663

2017-11-10 07:06 +0000 [96f2ee865e]  Joshua Colp <jcolp@digium.com>

	* pjsip: Add patch to allow all transports to be destroyed.

	  If a transport is created with the same transport type, source
	  IP address, and source port as one that already exists the old
	  transport is moved into a linked list called "tp_list".

	  If this old transport is later shutdown it will not be destroyed
	  as the process checks whether the transport is valid or not. This
	  check does not look at the "tp_list" when making the determination
	  causing the transport to not be destroyed.

	  This change updates the logic to query not just the main storage
	  method for transports but also the "tp_list".

	  Upstream issue https://trac.pjsip.org/repos/ticket/2061

	  ASTERISK-27411

	  Change-Id: Ic5c2bb60226df0ef1c8851359ed8d4cd64469429

2017-11-09 20:34 +0000 [bb77666620]  Corey Farrell <git@cfware.com>

	* core: Remove disabled code.

	  handle_quit has been disabled since 2003, remove it.

	  Change-Id: Idc3aaa6c81676160547078f9b71e8aa43de2db18

2017-11-09 13:24 +0000 [23b0ef3e9b]  Corey Farrell <git@cfware.com>

	* Build System: Disable parallel make in the root Makefile.

	  This ensures that the root Makefile runs only a single target at a time.
	  SUBMAKE will still honor requested parallelism, so 'make -j8' will build
	  one directory at a time but allow 8 jobs at once when building a sub
	  directory.

	  This will fix some display glitches related to rebuild of XML
	  documentation.  It will also prevent some edge case errors where
	  bundled pjproject needs to be rebuild before other parts of Asterisk.

	  Change-Id: I4f2ec6fbbec1ada0ccb1109a28ea303524239b1e

2017-03-29 20:46 +0000 [12010fc5c0]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip.c: Fix uninitialized cause value on failure.

	  Change-Id: I3f9dd3c31bd582e54a30381500077de2319d8cc3

2017-11-08 01:40 +0000 [0bda39c668]  Corey Farrell <git@cfware.com>

	* DEBUG_FD_LEAKS: Add missing FD creators.

	  This adds FD tracking for the following functions:
	  * eventfd
	  * timerfd_create
	  * socketpair
	  * accept

	  ASTERISK-27404

	  Change-Id: Id6848fe904ade2d34eb39d2a20bd6b223e1111fc

2017-11-07 11:49 +0000 [05f557820b]  Corey Farrell <git@cfware.com>

	* bridge_softmix: Note why ast_stream_topology_set_stream cannot fail.

	  This appeared in my audit of ast_stream_topology_set_stream callers
	  not checking for errors but in this situation the call cannot fail.
	  Add comment so this can be ignored in the future.

	  Change-Id: I91d25704859efbe50b8b82cfe1cd3c40ba177c9f

2017-10-19 13:35 +0000 [dd1a914495]  Kevin Harwell <kharwell@digium.com>

	* AST-2017-011 - res_pjsip_session: session leak when a call is rejected

	  A previous commit made it so when an invite session transitioned into a
	  disconnected state destruction of the Asterisk pjsip session object was
	  postponed until either a transport error occurred or the event timer
	  expired. However, if a call was rejected (for instance a 488) before the
	  session was fully established the event timer may not have been initiated,
	  or it was canceled without triggering either of the session finalizing states
	  mentioned above.

	  Really the only time destruction of the session should be delayed is when a
	  BYE is being transacted. This is because it's possible in some cases for the
	  session to be disconnected, but the BYE is still transacting.

	  This patch makes it so the session object always gets released (no more
	  memory leak) when the pjsip session is in a disconnected state. Except when
	  the method is a BYE. Then it waits until a transport error occurs or an event
	  timeout.

	  ASTERISK-27345 #close

	  Reported by: Corey Farrell

	  Change-Id: I1e724737b758c20ac76d19d3611e3d2876ae10ed

2017-10-03 16:19 +0000 [b358e441cd]  Richard Mudgett <rmudgett@digium.com>

	* AST-2017-010: Fix cdr_object_update_party_b_userfield_cb() buf overrun

	  cdr_object_update_party_b_userfield_cb() could overrun the fixed buffer if
	  the supplied string is too long.  The long string could be supplied by
	  external means using the CDR(userfield) function.

	  This may seem reminiscent to AST-2017-001 (ASTERISK_26897) and it is.  The
	  earlier patch fixed the buffer overrun for Party A's userfield while this
	  patch fixes the same thing for Party B's userfield.

	  ASTERISK-27337

	  Change-Id: I0fa767f65ecec7e676ca465306ff9e0edbf3b652

2017-10-19 13:53 +0000 [74432f51f9]  George Joseph <gjoseph@digium.com>

	* AST-2017-009: pjproject: Add validation of numeric header values

	  Parsing the numeric header fields like cseq, ttl, port, etc. all
	  had the potential to overflow, either causing unintended values to
	  be captured or, if the values were subsequently converted back to
	  strings, a buffer overrun.  To address this, new "strto" functions
	  have been created that do range checking and those functions are
	  used wherever possible in the parser.

	   * Created pjlib/include/limits.h and pjlib/include/compat/limits.h
	     to either include the system limits.h or define common numeric
	     limits if there is no system limits.h.

	   * Created strto*_validate functions in sip_parser that take bounds
	     and on failure call the on_str_parse_error function which prints
	     an error message and calls PJ_THROW.

	   * Updated sip_parser to validate the numeric fields.

	   * Fixed an issue in sip_transport that prevented error messages
	     from being properly displayed.

	   * Added "volatile" to some variables referenced in PJ_CATCH blocks
	     as the optimizer was sometimes optimizing them away.

	   * Fixed length calculation in sip_transaction/create_tsx_key_2543
	     to account for signed ints being 11 characters, not 9.

	  ASTERISK-27319
	  Reported by: Youngsung Kim at LINE Corporation

	  Change-Id: I48de2e4ccf196990906304e8d7061f4ffdd772ff

2017-11-06 17:58 +0000 [2c4db2a3d5]  Corey Farrell <git@cfware.com>

	* res_pjsip_pubsub: Fix multiple leaks on failure to append vectors.

	  Change-Id: I68ece0073ea79667ca41eb10405f516f1d30d482

2017-11-06 18:12 +0000 [48e96aba6a]  Corey Farrell <git@cfware.com>

	* res_pjsip_history: Fix multiple leaks on vector append failure.

	  Change-Id: I41e8d5183ace284095cc721f3b1fb32ade3f940f

2017-11-06 18:01 +0000 [ecb81ae4de]  Corey Farrell <git@cfware.com>

	* res_pjsip_session: Fix multiple leaks.

	  * Pre-initialize cloned media state vectors to final size to ensure
	    vector errors cannot happen later in the clone initialization.
	  * Release session_media on vector replace failure in
	    ast_sip_session_media_state_add.
	  * Release clone and media_state in ast_sip_session_refresh if we fail to
	    append to the stream topology, return an error.

	  Change-Id: Ib5ffc9b198683fa7e9bf166d74d30c1334c23acb

2017-11-07 12:03 +0000 [9b3db9a7fd]  Corey Farrell <git@cfware.com>

	* main/sdp_state: Check for errors from ast_stream_topology_set_stream.

	  Change-Id: I84a83ae69daba5d185cc1d939b133a4c23565497

2017-11-06 16:37 +0000 [0cfc3cbf02]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_registrar.c: Fix AOR and pjproject group deadlock.

	  One of the patches for ASTERISK_27147 introduced a deadlock regression.
	  When the connection oriented transport shut down, the code attempted to
	  remove the associated contact.  However, that same transport had just
	  requested a registration that we hadn't responded to yet.  Depending
	  upon timing we could deadlock.

	  * Made send the REGISTER response after we completed processing the
	  request contacts and released the AOR lock to avoid the deadlock.

	  ASTERISK-27391

	  Change-Id: I89a90f87cb7a02facbafb44c75d8845f93417364

2017-11-07 11:40 +0000 [eba1179795]  Corey Farrell <git@cfware.com>

	* res_pjsip_session: Check for errors from ast_stream_topology_set_stream.

	  Free memory and return error if ast_stream_topology_set_stream fails.

	  Change-Id: I9f4dbf44bed627243d2f1dd8aea2eab6c38a028d

2017-11-07 11:34 +0000 [4ac6dd4e95]  Corey Farrell <git@cfware.com>

	* res_pjsip_t38: Better error checking for t38_create_media_state.

	  Change-Id: I81b2587427c6982aa3e2a3f9ad69cce8d316eb10

2017-11-06 15:38 +0000 [fb18895108]  Corey Farrell <git@cfware.com>

	* stream: Return error from ast_stream_topology_set_stream.

	  ast_stream_topology_set_stream had suppressed error codes from
	  AST_VECTOR_APPEND.  The result of AST_VECTOR_APPEND needs to be returned
	  to the caller so they can take appropriate action on the stream.

	  Change-Id: I6c0d12755743eadba1357f6153526cc055592856

2017-11-06 17:21 +0000 [801094da7b]  Corey Farrell <git@cfware.com>

	* res_stasis: Fix multiple leaks.

	  * res/stasis/app.c JSON passed to app_send needs to be released.
	  * res/stasis_message.c: objects leak if vector append fails.

	  Change-Id: I8dd5385b9f50a5cadf2b1d16efecffd6ddb4db4a

2017-11-07 06:56 +0000 [02329b9a34]  Richard Mudgett <rmudgett@digium.com>

	* res_pjproject.c: Fix ast_strdup() alloc failure.

	  Change-Id: I74688038e7afe3a279359cce53aadb28ade51ead

2017-11-05 22:06 +0000 [a36d8cc533]  Aaron An <anjb@ti-net.com.cn>

	* res_pjsip:  Avoid crash when contact uri is empty string

	  Asterisk will crash if contact uri is invalid, so contact_apply_handler
	  should check if the uri is NULL or empty.

	  ASTERISK-27393 #close
	  Reported-by: Aaron An
	  Tested-by: AaronAn

	  Change-Id: Ia0309bdc6b697c73c9c736e1caec910b77ca69f5

2017-11-06 17:55 +0000 [7ef38d399a]  Corey Farrell <git@cfware.com>

	* res_pjsip_outbound_registration: Fix leak on vector add failure.

	  Change-Id: I774b88b3c9da41edd4dc8d78f095481f52f2bd46

2017-11-06 17:48 +0000 [8684219f79]  Corey Farrell <git@cfware.com>

	* res_pjsip_exten_state: Check for vector append failure.

	  Release reference to publisher if we fail to add it to the vector.

	  Change-Id: I64dff3f481b67b9884f37cadba7a5ccf23d084f3

2017-11-06 17:44 +0000 [f899368cd6]  Corey Farrell <git@cfware.com>

	* res_pjsip_config_wizard: Fix leaks and add check for malloc failure.

	  wizard_apply_handler():
	  - Free host if we fail to add it to the vector.

	  wizard_mapped_observer():
	  - Check for otw allocation failure.
	  - Free otw if we fail to add it to the vector.

	  Change-Id: Ib5d3bcabbd9c24dd8a3c9cc692a794a5f60243ad

2017-11-06 17:38 +0000 [4016884ef3]  Corey Farrell <git@cfware.com>

	* res_stasis_playback: Check for failure to append vector.

	  Free resources and return error if we fail to append the vector in
	  stasis_app_control_play_uri.

	  Change-Id: I22c4a90dd859b253f2850c6511de48b25609422b

2017-11-06 17:33 +0000 [24b9751aaa]  Corey Farrell <git@cfware.com>

	* test_sorcery_memory_cache_thrash: Handle error from vector append.

	  Cleanup resources when we fail to append the vector and report test
	  failure.

	  Change-Id: I6eb41586fd11dee8c0dfe35e91cb465a4cab7298

2017-11-06 17:28 +0000 [29205e7adc]  Corey Farrell <git@cfware.com>

	* res_pjsip: Fix leak on error in ast_sip_auth_vector_init.

	  Change-Id: Ib0fc7a18f3135ca8990c3984c9e15f6d26e556e8

2017-11-06 17:17 +0000 [70fcc043bb]  Corey Farrell <git@cfware.com>

	* res_pjproject: Handle error from adding to the buildopts vector.

	  Change-Id: I076c7bd207c7989a23005395ce1735392657be65

2017-11-06 17:11 +0000 [5247ba4b88]  Corey Farrell <git@cfware.com>

	* res_ari_events: Fix use after free / double-free of JSON message.

	  When stasis_app_message_handler needs to queue a message for a later
	  connection it needs to bump the message reference so it doesn't get
	  freed when the caller releases it's reference.

	  Change-Id: I82696df8fe723b3365c15c3f7089501da8daa892

2017-11-06 15:33 +0000 [adb4fdcb7b]  Corey Farrell <git@cfware.com>

	* stasis: Release object if vector append fails.

	  Change-Id: I3e5cc669169aab6175ddfaf7486edeaeb4fdcfb1

2017-11-06 15:20 +0000 [2f4f216026]  Corey Farrell <git@cfware.com>

	* RTP Engine: Deal with errors returned from AST_VECTOR_REPLACE.

	  Check for errors from AST_VECTOR_REPLACE and clean memory if needed.

	  Change-Id: I124d15cc1d645f85a72a1279f623c1993b304b0b

2017-11-06 15:16 +0000 [5762f72425]  Corey Farrell <git@cfware.com>

	* PBX: Handle errors from AST_VECTOR_APPEND.

	  This resolves potentials leaks on AST_VECTOR_APPEND error in:
	  * ast_context_add_include2
	  * ast_context_add_switch2
	  * ast_context_add_ignorepat2

	  Change-Id: Ib60e95c4f622fa3b832d87227c0523a695d736b6

2017-11-06 15:10 +0000 [714026b32e]  Corey Farrell <git@cfware.com>

	* Messaging: Report error on failure to register tech or handler.

	  Message tech and handler registrations use a vector which could fail to
	  expand.  If it does log and error and return error.

	  Change-Id: I593a8de81a07fb0452e9b0efd5d4018b77bca6f4

2017-11-06 15:07 +0000 [e43c8af77c]  Corey Farrell <git@cfware.com>

	* format_cap: Fix leak on AST_VECTOR_APPEND error.

	  format_cap_framed_init can fail on AST_VECTOR_APPEND.  This should
	  report failure to the caller and clean the newly allocated frame.

	  Change-Id: Ica0661235bf09497bf23d844ceb01f21b41a55b0

2017-11-06 14:23 +0000 [64bcb65a78]  Corey Farrell <git@cfware.com>

	* stasis: Remove silly use of RAII_VAR in stasis_forward_all.

	  Change-Id: I46de4c968d40144d5b049966304ff66c1469fb65

2017-11-06 12:51 +0000 [b7e1034009]  Corey Farrell <git@cfware.com>

	* CLI: Remove unused internal command.

	  The internal CLI command "_command complete" was last used by Asterisk
	  0.2.0.  Since then we've been using "_command nummatches" and "_command
	  matchesarray".

	  Change-Id: I682fe1e21a24a3bb5bd04146e639f1c5866bcfce

2017-11-03 18:08 +0000 [923424019b]  Richard Mudgett <rmudgett@digium.com>

	* stasis_bridges.c: Fix off-nominal json memory leaks.

	  Change-Id: Ib1181a36b317c86bff1ef2e44a17a0b1c73cfdc8

2017-11-03 17:43 +0000 [f81970d3fc]  Richard Mudgett <rmudgett@digium.com>

	* stasis_channels.c: Remove a very silly RAII_VAR().

	  Change-Id: I28b458b3c1a442c4ef0be7b4986a95ea4149e14f

2017-11-06 10:29 +0000 [36fedea8c1]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: Ensure remote URI contains URI only.

	  This change makes it so that any user of the pubsub
	  API that requests the remote URI receives only the URI.
	  Previously the entire string was returned, which could
	  contain a display name.

	  ASTERISK-27290

	  Change-Id: If1d0cd6630f0a264856d31d2a67933109187a017

2017-11-03 16:14 +0000 [9771f089f5]  Richard Mudgett <rmudgett@digium.com>

	* stasis/app.c: Optimize stasis_app_get_debug_by_name()

	  * Eliminate RAII_VAR()
	  * Short circuit application name lookup if global debug enabled.

	  Change-Id: I5f78b7bd6ca7fd2c3b07cbbe036c6a93b4681123

2017-11-02 18:40 +0000 [ee08f10d06]  Richard Mudgett <rmudgett@digium.com>

	* Fix ast_(v)asprintf() malloc failure usage conditions.

	  When (v)asprintf() fails, the state of the allocated buffer is undefined.
	  The library had better not leave an allocated buffer as a result or no one
	  will know to free it.  The most likely way it can return failure is for an
	  allocation failure.  If the printf conversion fails then you actually have
	  a threading problem which is much worse because another thread modified
	  the parameter values.

	  * Made __ast_asprintf()/__ast_vasprintf() set the returned buffer to NULL
	  on failure.  That is much more useful than either an uninitialized pointer
	  or a pointer that has already been freed.  Many uses won't have to check
	  for failure to ensure that the buffer won't be double freed or prevent an
	  attempt to free an uninitialized pointer.

	  * stasis.c: Fixed memory leak in multi_object_blob_to_ami() allocated by
	  ast_asprintf().

	  * ari/resource_bridges.c:ari_bridges_play_helper(): Remove assignment to
	  the wrong thing which is now not needed even if assigning to the right
	  thing.

	  Change-Id: Ib5252fb8850ecf0f78ed0ee2ca0796bda7e91c23

2017-11-06 08:05 +0000 [ca4e6b568f]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Ignore empty TLS configuration

	  When using realtime, fields that are not explicitly set by an
	  administrator are still presented to sorcery as empty strings. Handle
	  this case explicitly.

	  In this particular case, if any of these fields are required for TLS
	  support, their existence should be validated in the 'apply' handler once
	  we have a complete transport definition.

	  ASTERISK-27032 #close
	  Reported by: seanchann.zhou

	  Change-Id: Ie3b5fb421977ccdb33e415d4ec52c3fd192601b7

2017-09-29 09:50 +0000 [04d3785a79]  Sean Bright <sean.bright@gmail.com>

	* dtls: Add support for ephemeral DTLS certificates.

	  This mimics the behavior of Chrome and Firefox and creates an ephemeral
	  X.509 certificate for each DTLS session.

	  Currently, the only supported key type is ECDSA because of its faster
	  generation time, but other key types can be added in the future as
	  necessary.

	  ASTERISK-27395

	  Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4

2017-11-06 03:21 +0000 [4013bfa52b]  Corey Farrell <git@cfware.com>

	* configure: Add autoconf check for libopusfile.

	  This check is being added to make it easier for end-users of third party
	  open source Opus modules.  This was removed by ASTERISK-26426 but only
	  the module needed to be removed.

	  Change-Id: I62b9cd0c4fa8a77596ab0e042948a643a1152677

2017-11-06 03:18 +0000 [19332e6968]  Alexander Traud <pabstraud@compuserve.com>

	* tcptls: Print notice when TLS is enabled but not configured.

	  Asterisk can be compiled without a SSL/TLS library, without the Development
	  Headers of OpenSSL. However, if TLS (SIP) or Secure-WebSockets (WebRTC) was
	  enabled in a configuration file, Asterisk did not notice the user. Asterisk
	  failed silently, only the corresponding TCP ports were not open.

	  ASTERISK-27394
	  Reported-by: mossley74

	  Change-Id: Ib8b7539a5b2af8154c22e5f7a40fc68f95d95b93

2017-11-04 06:05 +0000 [2ebea5aa03]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Checkout of libSRTP 2.x.

	  Since Asterisk 13.17, libSRTP 2.x is supported. Therefore, its latest version
	  is installed again via the script install_prereq.

	  ASTERISK-27356

	  Change-Id: I13125839a79052356469e41edacbebff0a937d39

2017-11-01 17:47 +0000 [79ddcdbc70]  Richard Mudgett <rmudgett@digium.com>

	* Stasis/ARI: Fix off-nominal path json memory leaks.

	  Change-Id: Id569c624c426e3b22a99936473c730592d8b83fb

2017-11-02 11:38 +0000 [229790ea3d]  Richard Mudgett <rmudgett@digium.com>

	* AOC: Fix AOC-S json memory leak.

	  Change-Id: I3a1d40a41a8a7d00fa4a187de6a343a79155d3ef

2017-11-01 18:04 +0000 [de4a4796d0]  Richard Mudgett <rmudgett@digium.com>

	* res_stasis_device_state.c: Optimize stasis_app_device_states_to_json()

	  * Eliminate RAII_VAR()
	  * Replace looped alloca with a char[] since that is how it is used anyway.

	  Change-Id: Ia27e64a884afa0f50b9ffdb1cf23da6bfa51ffdf

2017-11-01 18:58 +0000 [103b05bb4b]  Richard Mudgett <rmudgett@digium.com>

	* res_stasis_mailbox.c: Fix leak of mailbox container.

	  Change-Id: I7d33c1635713047e7d1597c9d882f7dc006d94b4

2017-11-03 10:35 +0000 [290bad22c9]  Corey Farrell <git@cfware.com>

	* Build System: Fix build failure caused by recent CLI improvements.

	  We use the editline library to help with filename completion in our CLI
	  interface.  Some systems failed to find the header when included from
	  loader.c.  This is fixed by setting the proper CFLAGS for the build of
	  loader.o.

	  ASTERISK-27378

	  Change-Id: Ib7fd496f1d7ed48141a2eadd5dd61cab2f2308be

2017-11-01 11:12 +0000 [f8e0f9be22]  Ben Ford <bford@digium.com>

	* res_pjsip: Add to list of valid characters for from_user.

	  Fixes a regression where some characters were unable to be used in
	  the from_user field of an endpoint. Additionally, the backtick was
	  removed from the list of valid characters, since it is not valid,
	  and it was replaced with a single quote, which is a valid character.

	  ASTERISK-27387

	  Change-Id: Id80c10a644508365c87b3182e99ea49da11b0281

2017-11-02 05:34 +0000 [8701479386]  Joshua Colp <jcolp@digium.com>

	* core: Don't attempt to write to a stream that does not exist.

	  When a frame is provided to ast_write ensure that a multistream
	  capable channel has a stream for it before attempting to give it
	  to the channel driver. In some cases (such as a deferred SDP
	  negotiation) the stream may not yet exist.

	  ASTERISK-27364

	  Change-Id: Icf84ca982a67cdd6e9a71851eb7eb1bd0e865276

2017-11-02 01:57 +0000 [606ae3484a]  Corey Farrell <git@cfware.com>

	* Add missing menuselect dependencies.

	  This adds menuselect dependencies for modules that use symbols of other
	  modules.

	  ASTERISK-27390

	  Change-Id: Ia2d2849f5b87a72af7324a82edc3f283eafb5385

2017-11-01 22:57 +0000 [b616b7e4a9]  Corey Farrell <git@cfware.com>

	* res/ari/resource_bridges.h: Update from 'make ari-stubs'.

	  A comment was updated when I ran 'make ari-stubs'.

	  Change-Id: Ib5154ae3ad72aff53374c28ead540fe349c42175

2017-11-01 19:46 +0000 [79f111e1f3]  Corey Farrell <git@cfware.com>

	* Prevent unload of modules which implement an Optional API.

	  Once an Optional API module is loaded it should stay loaded.  Unloading
	  an optional API module runs the risk of a crash if something else is
	  using it.  This patch causes all optional API providers to tell the
	  module loader not to unload except at shutdown.

	  ASTERISK-27389

	  Change-Id: Ia07786fe655681aec49cc8d3d96e06483b11f5e6

2017-10-30 17:30 +0000 [b9f457eac0]  Corey Farrell <git@cfware.com>

	* Modules: Additional improvements to CLI completion.

	  Replace 'needsreload' argument with a 'type' argument to specify which
	  type of modules you want completion.  This provides more accurate CLI
	  completion for load and unload commands.

	  * 'module unload' now excludes modules that have active references or are
	    not running.
	  * 'module load' now excludes modules that are already running.
	  * 'core set debug [atleast] <level> [module]' shows running modules only.

	  ASTERISK-27378

	  Change-Id: Iea3e00054461484196c46f688f02635cc886bad1

2017-11-01 13:58 +0000 [1bfd1cf640]  Sean Bright <sean.bright@gmail.com>

	* pjsip_message_filter: Only do interface lookup for wildcard addresses.

	  Change-Id: Ie083987e69dc43b6861671c218cacacc11b2072f

2017-10-31 15:08 +0000 [1e70011710]  Kevin Harwell <kharwell@digium.com>

	* features: Bridge application's BRIDGERESULT not appropriately set

	  The dialplan application "Bridge" was not setting the BRIDGERESULT to failure
	  when a failure did occur. Even worse if it did fail to join the bridge it would
	  still report success.

	  This patch now sets the BRIDGERESULT variable to an appropriate value for a
	  given condition state. Also, removed the value INCOMPATIBLE as a valid result
	  type since it is no longer used.

	  ASTERISK-27369 #close

	  Change-Id: I22588e7125a765edf35cff28c98ca143e9927554

2017-10-31 13:18 +0000 [f2175c5a39]  Corey Farrell <git@cfware.com>

	* res_ari_channels: Fix reference leak in channel_state_invalid.

	  channel_state_invalid leaked a reference to the channel snapshot any
	  time it was aquired.

	  ASTERISK-27067 #close

	  Change-Id: I8c653f00416b39978513c5605c4be0f03b1df29a

2017-10-25 17:31 +0000 [4c535f5c30]  Joshua Colp <jcolp@digium.com>

	* core / pjsip: Add support for grouping streams together.

	  In WebRTC streams (or media tracks in their world) can be grouped
	  together using the mslabel. This informs the browser that each
	  should be synchronized with each other.

	  This change extends the stream API so this information can
	  be stored with streams. The PJSIP support has been extended
	  to use the mslabel to determine grouped streams and store
	  this association on the streams. Finally when creating the
	  SDP the group information is used to cause each media stream
	  to use the same mslabel.

	  ASTERISK-27379

	  Change-Id: Id6299aa031efe46254edbdc7973c534d54d641ad

2017-10-30 09:20 +0000 [022de525be]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* ast_coredumper: allow setting asterisk binary explicitly

	  Adds an extra option, --asterisk-bin=<path> to ast_coredumper. If
	  provided, the binary given to gdb will be the parameter, rather than
	  asterisk from the PATH.

	  ASTERISK-27380 #close

	  Change-Id: I25f5b91eb75059b0fb2f142e468c26b283b0a9f3

2017-10-25 01:10 +0000 [3052b56423]  Florian Floimair <f.floimair@commend.com>

	* alembic: Add bundle column in ps_endpoints table

	  The ps_endpoints table was missing the bundle column
	  introduced with the bundle feature in
	  commit 065c3005ad92.

	  ASTERISK-27374 #close

	  Change-Id: Ic900f4f2c20f64b99ea898d50f5c0a7117472d46

2017-10-30 00:32 +0000 [e82b921c35]  Corey Farrell <git@cfware.com>

	* Modules: Fix issues with CLI completion.

	  * Stop using ast_module_helper to check if a module is loaded, use
	    ast_module_check instead (app_confbridge and app_meetme).
	  * Stop ast_module_helper from listing reload classes when needsreload
	    was not requested.

	  ASTERISK-27378

	  Change-Id: Iaed8c1e4fcbeb242921dbac7929a0fe75ff4b239

2017-10-28 19:18 +0000 [9bad4c74cc]  Igor Goncharovskiy <igorg@iqtek.ru>

	* app_agent_spool: Fix typo in dtmf features usage desctiption

	  Fix typo, that specify usage wrong option 'dtmf-features' for CHANNEL() function
	  instead of correct 'dtmf_features'

	  ASTERISK-27377 #close

	  Change-Id: I15ecc829c1035b359584673e12cdb5c9291ac930

2017-10-27 13:41 +0000 [0991874430]  Corey Farrell <git@cfware.com>

	* res_pjsip_pubsub: Resolve potential crash in allocate_subscription.

	  When allocate_subscription fails to initialize fields of the new sub it
	  calls destroy_subscription.

	  Change-Id: I5b79c915ec216dc00c13c1e4172137864a4bec85

2017-10-26 12:18 +0000 [26607e4e3b]  Richard Mudgett <rmudgett@digium.com>

	* app_voicemail.c: Fix compiler warning with IMAP build.

	  ASTERISK-27181

	  Change-Id: Ic4468b49860bd7f67e922baf4c9e96828c184d17

2017-10-25 14:38 +0000 [2ca3dbb197]  Richard Mudgett <rmudgett@digium.com>

	* codec.c: Defensively check the returned samples.

	  Earlier versions of the codec_opus samples_count callback can return
	  negative error values on undecodable frames.  This resulted in a divide by
	  zero exception.

	  * Added a defensive check in ast_codec_samples_count() for a "negative"
	  samples count return value.  Log the event and set the count to zero.

	  ASTERISK-27194

	  Change-Id: Icf69350307ecbbc80a3d74de46af9bd80ea17819

2017-10-24 10:33 +0000 [9e1fbab382]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add 'ip' as a valid option to 'identify_by' on endpoint.

	  When the identify_by option on an endpoint is set to ip it will
	  only be identified using the res_pjsip_endpoint_identifier_ip module.
	  This ensures that it is not mistakenly matched using the username of
	  the From header. To ensure behavior has not changed the default has
	  been changed to "username,ip" for the identify_by option.

	  ASTERISK-27206

	  Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd

2017-10-25 12:26 +0000 [4aec70690d]  George Joseph <gjoseph@digium.com>

	* ast_coredumper:  Add gzipping of binaries and display of signal info

	  The --tarball-coredump option now creates a gzipped tarball of
	  coredumps processed, their results txt files and copies of
	  /etc/os-release, /usr/sbin/asterisk, /usr/lib(64)/libasterisk* and
	  /usr/lib(64)/asterisk as those files are needed to properly examine
	  the coredump.  The file will be named
	  /tmp/asterisk.<timestamp>.coredumps.tar.gz or
	  /tmp/asterisk-<uniqueid>.coredumps.tar.gz if --tarball-uniqueid was
	  specified.

	  Added dumps of *_siginfo to the top of the txt files so you can
	  tell what signal was invoked.

	  Change-Id: Ib9ee6d83592d4b1bc90cb3419a05376a88d1ded9

2017-10-25 09:23 +0000 [3821be1c68]  Ben Ford <bford@digium.com>

	* http.c: Fix http header send content.

	  Currently ast_http_send barricades a portion of the content that
	  needs to be sent in order to establish a connection for things
	  like the ARI client. The conditional and contents have been changed
	  to ensure that everything that needs to be sent, will be sent.

	  ASTERISK-27372

	  Change-Id: I8816d2d8f80f4fefc6dcae4b5fdfc97f1e46496d

2017-03-30 09:51 +0000 [5553adb8ba]  Corey Farrell <git@cfware.com>

	* Build System: Fix --disable-xmldoc option.

	  The configure option to disable XML documentation does not currently
	  work.  This patch makes it effective, but also causes an ABI change by
	  removing the ast_xmldoc_* symbols.  Disabling xmldoc also prevents docs
	  from being automatically generated, but they can still be manually
	  generated with 'make doc/core-en_US.xml'.

	  ASTERISK-26639

	  Change-Id: Ifac562340c09f80c83e0203de098fcac93bf8c44

2017-10-23 00:55 +0000 [569e9a8391]  Corey Farrell <git@cfware.com>

	* Single API for ast_store_lock_info and ast_remove_lock_info.

	  This makes the 'bt' parameter unconditional for ast_store_lock_info and
	  ast_remove_lock_info.  The 'bt' parameter is unused when HAVE_BKTR is
	  undefined.

	  Change-Id: Ieced0e920928b735a39c3b5952b806c473d67453

2017-10-24 09:43 +0000 [6474de5f72]  Corey Farrell <git@cfware.com>

	* chan_sip: Fix SUBSCRIBE with missing "Expires" header.

	  When chan_sip receives a SUBSCRIBE request with no "Expires" header it
	  processes the request as an unsubscribe.  This is incorrect, per RFC3264
	  when the "Expires" header is missing a default expiry should be used.

	  ASTERISK-18140

	  Change-Id: Ibf6dcd4fdd07a32c2bc38be1dd557981f08188b5

2017-10-24 07:24 +0000 [7126520b3e]  Alexander Traud <pabstraud@compuserve.com>

	* lpc10: Avoid compiler warning when DONT_OPTIMIZE/COMPILE_DOUBLE.

	  ASTERISK-23556
	  Reported by: Marcello Ceschia

	  Change-Id: Ic27e88e0336a0d83877dc857938659dc5560b93c

2017-10-07 12:14 +0000 [841ac3ded6]  Corey Farrell <git@cfware.com>

	* hashtab: Use ast_free.

	  A few places in hashtab use free instead of ast_free, remove declaration
	  of ASTMM_LIBC from hashtab.c as it's no longer needed.

	  Change-Id: I2ff089bad71640c03c3ce97f1b00fc962ef79427

2017-10-23 01:02 +0000 [fb585cf185]  Corey Farrell <git@cfware.com>

	* Bundled pjproject: Enable pj_assert when dev-mode is enabled.

	  ASTERISK-27359

	  Change-Id: Ib01fb6c01f9bb87129374a51cb9318c474147517

2017-10-23 13:44 +0000 [ee21076151]  Corey Farrell <git@cfware.com>

	* main/Makefile: Remove rule for non-existant testexpr2.

	  Change-Id: Ibb3e47f27a395d74d8c5263db015b05434f5969b

2017-10-23 12:42 +0000 [a9e9608982]  Corey Farrell <git@cfware.com>

	* test_config: Fix failure and segfault when config_hook is run twice.

	  On second run the config_hook test was unexpectedly failing to load
	  test_config.conf because it was still unmodified since the last load.
	  This is fixed by not passing CONFIG_FLAG_FILEUNCHANGED for the initial
	  loads, only using it when we are tested that a reload of unmodified
	  files do not initiate the hook.

	  ASTERISK-25960

	  Change-Id: Ifd679509a23ed163e5cc647490bf7df4ae3cd856

2017-10-23 12:23 +0000 [6f0431798e]  George Joseph <gjoseph@digium.com>

	* res_pjsip_sdp_rtp:  Fix setting of address type for rtp_ipv6

	  create_outgoing_sdp_stream was setting "addr_type = STR_IP6" only
	  when an ipv6 media_address was specified on the endpoint.  If
	  rtp_ipv6 was set and ast_sip_get_host_ip_string returned an ipv6
	  address, we were leaving the addr_type set at the default of
	  STR_IP4.  This caused the address type to be set incorrectly on the
	  "o" and "c" SDP attributes even though the address was set
	  correctly.  Some clients don't like the mismatch.

	   * Removed the test for endpoint/media_address and now check all
	     addresses for ipv6.

	  ASTERISK-27198
	  Reported by: Martin Cisárik

	  Change-Id: I5214fc31b728117842243807e7927a319cf77592

2017-10-23 07:53 +0000 [488f98310f]  Richard Mudgett <rmudgett@digium.com>

	* app_agent_pool.c: Fix online documentation typo.

	  Change-Id: Ib0bc95fd0ec288c78c313823254d7a84ebfc4429

2017-10-22 17:32 +0000 [252353e0a9]  Joshua Colp <jcolp@digium.com>

	* res_xmpp: Ensure the connection filter is available.

	  Users of the API that res_xmpp provides expect that a
	  filter be available on the client at all times. When
	  OAuth authentication support was added this requirement
	  was not maintained.

	  This change merely moves the OAuth authentication to
	  after the filter is created, ensuring users of res_xmpp
	  can add things to the filter as needed.

	  ASTERISK-27346

	  Change-Id: I4ac474afe220e833288ff574e32e2b9a23394886

2017-10-21 03:44 +0000 [840e08716b]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Crypto attribute not last but first on SDP media level.

	  This matches the behavior of the other SIP channel driver, chan_pjsip.

	  ASTERISK-27365

	  Change-Id: I8f23a51290a58b75816da2999ed1965441dfc5d6

2017-10-17 10:53 +0000 [e41561fc2a]  Richard Mudgett <rmudgett@digium.com>

	* res_pjproject.c: Upgrade bundled PJPROJECT to 2.7

	  Update patches included in bundled PJPROJECT for the new version.

	  ASTERISK-27355

	  Change-Id: I9ac5dbbffaadca25ad24fac8b9ab615e5ace6083

2017-10-16 16:46 +0000 [4559cd0e28]  Nir Simionovich <nirs@greenfieldtech.net>

	* This patch adds a beanstalk CDR backend.

	  Beanstalkd is a simple to use job queue. It provides a means to
	  create multiple job queues called "tubes". Each tube can store
	  multiple jobs, with varying priorities with the queue. Queue
	  processing is available via a simple TCP socket or via well defined
	  libraries, avaialble at
	  https://github.com/kr/beanstalkd/wiki/client-libraries

	  This module is based upon the beanstalk-client library, available
	  for download at: https://github.com/deepfryed/beanstalk-client

	  Change-Id: I5fe4089a34ab3b39230786d9bbfddafa56715f48

2017-10-18 13:41 +0000 [4760b2445c]  Corey Farrell <git@cfware.com>

	* res_pjsip_pubsub: Prevent unload except during shutdown.

	  Prevent unload of the module as certain pjsip initialization functions
	  cannot be reversed.  This required a reorder of the module_load so that
	  the non-reversable pjsip functions are not called until all potential
	  errors have been ruled out.

	  ASTERISK-24483

	  Change-Id: Iee900f20bdd6ee1bfe23efdec0d87765eadce8a7

2017-10-18 13:37 +0000 [449ee66a11]  Corey Farrell <git@cfware.com>

	* res_pjsip_refer: Prevent unload except during shutdown.

	  Prevent unload of the module as certain pjsip initialization functions
	  cannot be reversed.

	  ASTERISK-24483

	  Change-Id: I94597ec8b8491f5af9c57bf66dbc3b078fe2d49d

2017-10-18 12:04 +0000 [c9e19b31f5]  Corey Farrell <git@cfware.com>

	* chan_sip: Fix output of 'sip set debug off'.

	  When sip.conf contains 'sipdebug=yes' it is impossible to disable it
	  using CLI 'sip set debug off'.  This corrects the output of that CLI
	  command to instruct the user to turn sipdebug off in the configuration
	  file.

	  ASTERISK-23462 #close

	  Change-Id: I1cceade9caa9578e1b060feb832e3495ef5ad318

2017-10-16 10:53 +0000 [955a891a84]  Corey Farrell <git@cfware.com>

	* app_macro deprecation.

	  * Mark the module deprecated.
	  * Disable the module by default.
	  * Produce a warning the first time a macro is used.
	  * Note deprecation related options in app_dial and app_queue.

	  ASTERISK-27350

	  Change-Id: I560ea043bacdbc5534a17d97854273d52c2f1bdc

2017-10-18 03:30 +0000 [95b45d1c46]  Alexander Traud <pabstraud@compuserve.com>

	* res_srtp: Add support for libsrtp2 with AES-GCM.

	  Beside allowing AES-GCM again, this adds AES-192 again.

	  ASTERISK-27356

	  Change-Id: Ia97a435faf26300335d9552fa676b5d17e5f7233

2017-10-14 14:41 +0000 [5d8c517960]  Joshua Colp <jcolp@digium.com>

	* bridge_softmix: Reduce topology cloning and improve renegotiation.

	  As channels join and leave an SFU the bridge_softmix module
	  needs to renegotiate to add and remove their streams from
	  the other participants. Previously this was done by constructing
	  the ideal stream topology every time but in the case of leave
	  this was incomplete.

	  This change makes it so bridge_softmix keeps an ideal stream
	  topology for each channel and uses it when making changes. This
	  ensures that when we request a renegotiation we are always
	  certain that we are aiming for the best stream topology
	  possible. In the case of a channel leaving this ensures that
	  we try to have an existing participant fill their place if
	  a participant has a fixed limit on the maximum number of video
	  streams they allow.

	  ASTERISK-27354

	  Change-Id: I58070f421ddeadd2844a33b869b052630cf2e514

2017-10-06 15:55 +0000 [73164d0d7f]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Rename the Party A CDR container.

	  * Rename the Party A CDR container from active_cdrs_by_channel to
	  active_cdrs_master.

	  * Renamed the support functions associated with active_cdrs_master
	  appropriately.

	  ASTERISK-27335

	  Change-Id: I6104bb3edc3a0b7243ce502e45e8832b0cff14f7

2017-10-02 17:42 +0000 [fe1120cf88]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Add container to key off of Party B channel names.

	  The CDR performance gets worse the further it gets behind in processing
	  stasis messages.  One of the reasons is because of a n*m loop used when
	  processing Party B information.

	  * Added a new CDR container that is keyed to Party B so we don't need such
	  a large loop when processing Party B information.

	  NOTE: To reduce the size of the patch I deferred to another patch the
	  renaming of the Party A active_cdrs_by_channel container to
	  active_cdrs_master and renaming the container's hash and cmp functions
	  appropriately.

	  ASTERISK-27335

	  Change-Id: I0bf66e8868f8adaa4b5dcf9e682e34951c350249

2017-10-11 06:04 +0000 [da24d425eb]  Torrey Searle <torrey@voxbone.com>

	* contrib/script/sip_to_pjsip: implement 'all' for allow/disallow

	  when 'all' is specified in an allow or disallow section, it should erase
	  all values from the inverse section in the default config. E.G.
	  allow=all should erase any deny values from default config &
	  vice-versa

	  ASTERISK-27333 #close

	  Change-Id: I99219478fb98f08751d769daaee0b7795118a5a6

2017-10-14 04:11 +0000 [c4f40b778a]  Guido Falsi <madpilot@freebsd.org>

	* chan_dahdi: wrap include file which is not present on BSD systems in #ifdef

	  The sys/sysmacros.h include file does not exist in BSD systems and
	  is not required to build this module there.
	  Since an "#if defined(__NetBSD__) || defined(__FreeBSD__)" section
	  already exist I moved that include line inside it's #else branch.

	  ASTERISK-27343 #close

	  Change-Id: Ibfb64f4e9a0ce8b6eda7a7695cfe57916f175dc1

2017-10-13 09:43 +0000 [8f65d91dfd]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip_session: Rewrite o= with external_media_address.

	  PJSIP allows a domain name as external_media_address. This allows chan_pjsip to
	  be used behind a NAT with changing IP addresses. The IP address of that domain
	  is resolved to the c= line already. This change sets also the o= line to that
	  domain.

	  ASTERISK-27341 #close

	  Change-Id: I690163b6e762042ec38b3995aa5c9bea909d8ec4

2017-10-12 12:03 +0000 [7d51a79beb]  Joshua Colp <jcolp@digium.com>

	* bridge_simple: Improve renegotiation success rate.

	  When making channels compatible the bridge_simple module
	  will renegotiate one to better match the other. Some
	  endpoints incorrectly terminate the call if this process
	  fails.

	  To better handle this scenario the audio streams present
	  on the new requested topology will include any existing
	  negotiated formats that happen to exist on the first
	  valid audio stream. This ensures formats are persent that
	  are known to be acceptable to the remote endpoint.

	  ASTERISK-27259

	  Change-Id: I8fc0cc03e8bcfd0be8302f13b9f32d8268977f43

2017-10-13 08:51 +0000 [ee65d5ac7c]  Corey Farrell <git@cfware.com>

	* ast_bt_get_symbols: Prevent double-free.

	  It's possible for bfdobj to be created but syms not created.  If syms
	  was not allocated in the current loop iteration but was allocated in the
	  previous iteration it would crash.

	  ASTERISK-27340

	  Change-Id: I5b110c609f6dfe91339f782a99a431bca5837363

2017-10-13 08:12 +0000 [44d9446eb5]  Alexander Traud <pabstraud@compuserve.com>

	* tcptls: NULL-check the parameter of ast_ssl_teardown before accessing it.

	  This avoids a crash on stopping a chan_sip which failed to start its TLS server.

	  ASTERISK-27339 #close

	  Change-Id: I327fc70db68eaaca5b50a15c7fd687fde79263d5

2017-09-29 14:26 +0000 [f369be21a8]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Eliminated many calls to ao2_global_obj_ref().

	  The CDR performance gets worse the further it gets behind in processing
	  stasis messages.  One of the reasons is we were getting the global config
	  to determine if we needed to log a debugging message.

	  * Many calls to ao2_global_obj_ref() were just so we could determine if
	  debug mode is enabled.  Made a global flag to check instead.

	  * Eliminated many RAII_VAR() usages associated with the remaining
	  ao2_global_obj_ref() calls.

	  * Added missing NULL checks for the returned ao2_global_obj_ref() value.

	  ASTERISK-27335

	  Change-Id: Iceaad93172862f610cad0188956634187bfcc7cd

2017-10-06 13:45 +0000 [2eea087401]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Defer getting ao2_global_obj_ref() until needed.

	  The CDR performance gets worse the further it gets behind in processing
	  stasis messages.  One of the reasons is we were getting the global config
	  even if we didn't need it.

	  * Most uses of the global config were only needed on off nominal code
	  paths so it makes sense to not get it until absolutely needed.

	  ASTERISK-27335

	  Change-Id: I00c63b7ec233e5bfffd5d976f05568613d3c2365

2017-10-05 18:08 +0000 [7c7a917874]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Set stringfields only if they are different.

	  The CDR performance gets worse the further it gets behind in processing
	  stasis messages.  One of the reasons is we were repeatedly setting string
	  fields to potentially the same string in base_process_party_a().  Setting
	  a string field involves allocating room for the new string out of a memory
	  pool which may have to allocate even more memory.

	  * Check to see if the string field is already set to the desired string.

	  ASTERISK-27335

	  Change-Id: I3ccb7e23f1488417e08cafe477755033eed65a7c

2017-10-05 18:03 +0000 [c80c8f2ab9]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Fix setting dnid, callingsubaddr, and calledsubaddr

	  The string comparisons for setting these CDR variables was inverted.  We
	  were repeatedly setting these CDR variables only if the channel snapshots
	  had the same value.

	  ASTERISK-27335

	  Change-Id: I9482073524411e7ea6c03805b16de200cb1669ea

2017-08-25 08:19 +0000 [21c0283b78]  Thomas Sevestre <thomassevestre@free.fr>

	* features, manager : Add CancelAtxfer AMI action

	  Add action to cancel feature attended transfer with AMI interface

	  ASTERISK-27215 #close

	  Change-Id: Iab8a81362b5a1757e2608f70b014ef863200cb42

2017-10-06 04:55 +0000 [6576e4320a]  Daniel Tryba <daniel@tryba.nl>

	* res_pjsip_session: Prevent user=phone being added to anonimized URIs.

	  Move ast_sip_add_usereqphone to be called after anonymization of URIs,
	  to prevent the user_eq_phone adding "user=phone" to URIs containing a
	  username that is not a phonenumber (RFC3261 19.1.1). An extra call to
	  ast_sip_add_usereqphone on the saved version before anonymization is
	  added to add user=phone" to the PAI.

	  ASTERISK-27047 #close

	  Change-Id: Ie5644bc66341b86dc08b1f7442210de2e6acdec6

2017-10-06 05:14 +0000 [a56316423f]  Daniel Tryba <daniel@tryba.nl>

	* res_pjsip: Prevent "user=phone" being added multiple times to header

	  ast_sip_add_usereqphone adds "user=phone" to the header every time is is
	  called without checking whether the param already exists. Preventing
	  this by searching to string representation of header for "user=phone".

	  ASTERISK-26988 #close

	  Change-Id: Ib84383b07254de357dc6a98d91fc1d2c2c3719e6

2017-10-05 18:12 +0000 [e5b9eb0460]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Defer misc checks.

	  Try to defer some checks until needed in case there is an early exit.

	  Change-Id: Ibc6b34c38a4f60ad4f9b67984b7d070a07257064

2017-10-06 20:48 +0000 [e8bde6916a]  Seán C McCord <ulexus@gmail.com>

	* ari/bridge: Add mute, dtmf suppression controls

	  Add bridge_features structure to bridge creation.  Specifically, this
	  implements mute and DTMF suppression, but others should be able to be
	  easily added to the same structure.

	  ASTERISK-27322 #close
	  Reported by: Darren Sessions
	  Sponsored by: AVOXI

	  Change-Id: Id4002adfb65c9a8027ee9e1a5f477e0f01cf9d61

2017-10-11 07:03 +0000 [ab4d36533c]  George Joseph <gjoseph@digium.com>

	* chan_vpb:  Fix a gcc 7 out-of-bounds complaint

	  chan_vpb was trying to use sizeof(*p->play_dtmf), where
	  p->play_dtmf is defined as char[16], to get the length of the array
	  but since p->play_dtmf is an actual array, sizeof(*p->play_dtmf)
	  returns the size of the first array element, which is 1.  gcc7
	  validly complains because the context in which it's used could
	  cause an out-of-bounds condition.

	  Change-Id: If9c4bfdb6b02fa72d39e0c09bf88900663c000ba

2017-10-06 02:39 +0000 [be7da57546]  Nathan Bruning <nathan@iperity.com>

	* app_queue.c: clear moh field in init_queue

	  ASTERISK-27301 #close

	  Change-Id: Ic31361f34e2de3b6470e68fc37205a7711082eba

2017-10-09 21:00 +0000 [b8dadccbe1]  Corey Farrell <git@cfware.com>

	* sorcery: Use ao2_weakproxy to hold list of instances.

	  * Store weak proxy objects in instances container.
	  * Remove special unreference function and replace with macro that calls
	  ao2_cleanup.
	  * Add REF_DEBUG information to ast_sorcery_open.

	  Change-Id: I5a150a4e13cee319d46b5a4654f95a4623a978f8

2017-10-09 21:55 +0000 [7774623804]  Corey Farrell <git@cfware.com>

	* named_locks: Use ao2_weakproxy_find.

	  Change-Id: I0ce8a1b7101b6caac6a19f83a89f00eaba1e9d9c

2017-10-09 17:51 +0000 [b058f8673a]  Corey Farrell <git@cfware.com>

	* astobj2: Add ao2_weakproxy_find function.

	  This function finds a weak proxy in an ao2_container and returns the
	  real object associated with it.

	  Change-Id: I9da822049747275f5961b5c0a7f14e87157d65d8

2017-10-10 15:09 +0000 [fd3101e8ad]  Corey Farrell <git@cfware.com>

	* astobj2: Run weakproxy callbacks outside of lock.

	  Copy the list of weakproxy callbacks to temporary memory so they can be
	  run without holding the weakproxy lock.

	  Change-Id: Ib167622a8a0f873fd73938f7611b2a5914308047

2017-10-10 12:01 +0000 [3ad7d2f36c]  Sean Bright <sean.bright@gmail.com>

	* app_originate: Set ORIGINATE_STATUS correctly on failure

	  We were ignoring the return value from ast_pbx_outgoing_exten() and
	  ast_pbx_outgoing_app() which could fail before setting the reason code.
	  This resulted in failures being reported as success.

	  ASTERISK-25266 #close
	  Reported by: Allen Ford

	  Change-Id: Idf16237b7e41b527d2c69c865829128686beeb3b

2017-10-03 15:16 +0000 [b1d9fc87bc]  Torrey Searle <torrey@voxbone.com>

	* contrib/thirdparty/sip_to_pjsip: add additional flag mappings

	  add mappings for udptl redundancy, rtptimeout, and debug flags

	  Change-Id: Ie73cf5c83c05dee01eb9624ede76c1a30225d73a

2017-10-02 16:46 +0000 [b0408d05c0]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Eliminated simple RAII_VAR usages.

	  Change-Id: I150505db307249a962987e7b941bdd369bb91f35

2017-10-10 09:49 +0000 [11cefdf621]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* cdr_mysql: avoid releasing a config string

	  Fixes a memory corruption issue after a reload of cdr_mysql.

	  Issue was accidentally included in 747beb1ed159f89a3b58742e4257740b3d6d6bba .

	  ASTERISK-27270 #close

	  Change-Id: I90b6a9d18710c0f9009466370bd5f4bac5d5d12e

2017-10-10 07:42 +0000 [b228f5c5e6]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* declare optional openssl dependencies in moduleinfo

	  Declare optional openssl dependencies in:
	  * res_rtp_asterisk.c
	  * tcptls.c

	  ASTERISK-27328 #close

	  Change-Id: I2636f1c05b8104b4fe6f36cce0ebd9a98b9c78ab

2017-10-09 22:51 +0000 [fae09c6676]  Corey Farrell <git@cfware.com>

	* res_pjproject: Fix cleanup of buildopts vector.

	  ASTERISK-27306

	  Change-Id: I3bed0edf3f55b1d4adcbabb25ec14f11dc766c72

2017-10-03 16:09 +0000 [fdf9aacca3]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Replace redundant check with an ast_assert()

	  The only caller of cdr_object_fn_table.process_party_b() explicitly does
	  the check before calling.

	  Change-Id: Ib0c53cdf5048227842846e0df9d2c19117c45618

2017-10-02 17:41 +0000 [2e4b5fadbd]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Replace inlined code with ao2_t_replace()

	  Change-Id: I9f424f5282ca7d833592f958d95f1b2bafb549b0

2017-09-29 12:07 +0000 [62980eedc3]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Use current ao2 flag names

	  Change-Id: Ib59d7d2f2a4a822754628f2c48a308d6791a6e6e

2017-09-29 12:31 +0000 [e769846f11]  Richard Mudgett <rmudgett@digium.com>

	* cdr.h: Fix doxygen comments.

	  * Also some misc formatting in cdr.c.

	  Change-Id: Ied89a28802a662c37c43326a1aafdce596e0df4a

2017-09-20 18:36 +0000 [fb19799b62]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_registrar.c: Update remove_existing AOR contact handling.

	  When "rewrite_contact" is enabled, the "max_contacts" count option can
	  block re-registrations because the source port from the endpoint can be
	  random.  When the re-registration is blocked, the endpoint may give up
	  re-registering and require manual intervention.

	  * The "remove_existing" option now allows a registration to succeed by
	  displacing any existing contacts that now exceed the "max_contacts" count.
	  Any removed contacts are the next to expire.  The behaviour change is
	  beneficial when "rewrite_contact" is enabled and "max_contacts" is greater
	  than one.  The removed contact is likely the old contact created by
	  "rewrite_contact" that the device is refreshing.

	  ASTERISK-27192

	  Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b

2017-10-09 08:15 +0000 [ad38a55a2d]  Sean Bright <sean.bright@gmail.com>

	* res_config_sqlite: Don't enable SQLite CDRs when running 'make samples'

	  Change-Id: I65a5190b2732b2246d67472db70dd37db64ddad4

2017-10-08 14:05 +0000 [a0a1f95abf]  David Hajek <david.hajek@daktela.com>

	* res/res_ari.c Fix: Memory leaks in ARI when using Content-Type: application/json

	  ASTERISK-27305
	  Reported by: David Hajek
	  Tested by: David Hajek

	  Change-Id: Ife3e289062e6cf7d0e7d342dbf79ed96feff441e

2017-10-08 09:11 +0000 [feeb0974eb]  Alexander Traud <pabstraud@compuserve.com>

	* tcptls: Do not re-bind to wildcard on client creation.

	  Since ASTERISK-26922, this issue affected only those chan_sip which were
	  * enabled for dual-stack (bindaddr=::), and
	  * enabled for TCP (tcpenable=yes) and/or TLS (tlsenable=yes), and
	  * tried to register and/or invite a IPv4-only service,
	  * via TCP and/or TLS.
	  Now, ast_tcptls_client_create does not re-bind to [::] anymore.

	  ASTERISK-27324 #close

	  Change-Id: I4b242837bdeb1ec7130dc82505c6180a946fd9b5

2017-10-07 15:47 +0000 [eb224fea5e]  Corey Farrell <git@cfware.com>

	* res_pjsip_session: Fix format_cap leak.

	  ASTERISK-27306

	  Change-Id: I2c8d3fc148f9f53715c958314e1146f9611741f3

2017-10-06 10:51 +0000 [f4798faacc]  Matt Jordan <mjordan@digium.com>

	* res_corosync: Fix linking issue with Corosync 2.x

	  At some point in time in the history of Corosync (certainly within the
	  2.x branch), the corosync_cfg_state_track function was removed.
	  Unfortunately, the cfg library is only linked if this function is
	  present. Without the cfg library being linked to res_corosync, loading
	  of res_corosync will fail.

	  This patch makes it so that detecting corosync's core libraries,
	  determined by the COROSYNC external library checks, links both the cpg
	  and cfg libraries with res_corosync.

	  Change-Id: I674e9e1c8fea11c3bf81154aaa7c1fd43f945465

2017-10-05 16:26 +0000 [a68a91f722]  Corey Farrell <git@cfware.com>

	* res_pjsip: Fix leak of persistent endpoint references.

	  Do not manually call sip_endpoint_apply_handler from load_all_endpoints.
	  This is not necessary and causes memory leaks.

	  Additionally reinitialize persistent->aors when we reuse a persistent
	  object with a new endpoint.

	  ASTERISK-27306

	  Change-Id: I59bbfc8da8a14d5f4af8c5bb1e71f8592ae823eb

2017-10-05 17:59 +0000 [3bd00c4a7e]  Corey Farrell <git@cfware.com>

	* vector: multiple evaluation of elem in AST_VECTOR_ADD_SORTED.

	  Use temporary variable to prevent multiple evaluations of elem argument.
	  This resolves a memory leak in res_pjproject startup.

	  ASTERISK-27317 #close

	  Change-Id: Ib960d7f5576f9e1a3c478ecb48995582a574e06d

2017-10-05 15:54 +0000 [b35ac9e566]  Corey Farrell <git@cfware.com>

	* res_pjsip: Fix leak of fake_auth references.

	  pjsip_distributor leaks references to fake_auth when the default realm
	  has not changed.

	  ASTERISK-27306

	  Change-Id: I3fcf103b3680ad2d1d4610dcd6738eeaebf4d202

2017-10-05 20:23 +0000 [0f3e725503]  Corey Farrell <git@cfware.com>

	* main/strings: Fix uninitialized value.

	  ast_strings_match uses sscanf and checks for non-zero return to verify a
	  token was parsed. This is incorrect as sscanf returns EOF (-1) for errors.

	  ASTERISK-27318 #close

	  Change-Id: Ifcece92605f58116eff24c5a0a3b0ee08b3c87b1

2017-10-05 19:55 +0000 [0b6be1b2d4]  Corey Farrell <git@cfware.com>

	* res_sdp_translator_pjmedia: Fix test unregistration.

	  ASTERISK-27306

	  Change-Id: Ib3ed47167cb697ab7bd0a56cab589893f491651b

2017-10-02 07:48 +0000 [59b6e8467a]  Daniel Tryba <daniel@pocos.nl>

	* res_pjsip_caller_id chan_sip: Comply to RFC 3323 values for privacy

	  Currently privacy requests are only granted if the Privacy header
	  value is exactly "id" (defined in RFC 3325). It ignores any other
	  possible value (or a combination there of). This patch reverses the
	  logic from testing for "id" to grant privacy, to testing for "none" and
	  granting privacy for any other value. "none" must not be used in
	  combination with any other value (RFC 3323 section 4.2).

	  ASTERISK-27284 #close

	  Change-Id: If438a21f31a962da32d7a33ff33bdeb1e776fe56

2017-10-04 10:59 +0000 [65399a5eda]  Corey Farrell <git@cfware.com>

	* res_pjsip: Add REF_DEBUG info to module references.

	  This provides better information to REF_DEBUG log for troubleshooting
	  when the system is unable to unload res_pjsip.so during shutdown due to
	  module references.

	  ASTERISK-27306

	  Change-Id: I63197ad33d1aebe60d12e0a6561718bdc54e4612

2017-10-04 10:46 +0000 [7d04544986]  Corey Farrell <git@cfware.com>

	* res_pjsip: Fix issues that prevented shutdown of modules.

	  res_pjsip and res_pjsip_session had circular references, preventing both
	  modules from shutting down.
	  * Move session supplement registration to res_pjsip.
	  * Use create internal functions for use by pjsip_message_filter.c.

	  ASTERISK-27306

	  Change-Id: Ifbd5c19ec848010111afeab2436f9699da06ba6b

2017-09-28 02:56 +0000 [2301447a20]  Benoît Dereck-Tricot <benoit.dereck-tricot@eyepea.eu>

	* res_calendar_icalendar: Filter out occurrences superceded by another VEVENT

	  When we are loading the calendars, we call libical's
	  icalcomponent_foreach_recurrence method for each VEVENT component that
	  we have in our calendar.

	  That method has no knowledge concerning the existence of the other
	  VEVENT components and will feed our callback with all ocurrences
	  matching the requested time span.

	  The occurrences generated by icalcomponent_foreach_recurrence while
	  expanding a recurring VEVENT's RRULE and RDATE properties can be
	  superceded by an other VEVENT sharing the same UID.

	  I use an external iterator (in libical terminology) to avoid messing
	  with the internal ones from the calling function, and search for
	  VEVENTS which could supersede the current occurrence.

	  The event which can invalidate this occurence needs to have:

	  - the same UID as our recurrent component (comp)
	  - a RECURRENCE-ID property, which represents the start time of this
	    occurrence

	  If one component is found, just clean and return.

	  ASTERISK-27296 #close
	  Reported by: Benoît Dereck-Tricot

	  Change-Id: I8587ae3eaa765af7cb21eda3b6bf84e8a1c87af8

2017-09-28 17:37 +0000 [b2dbfe23ef]  Richard Mudgett <rmudgett@digium.com>

	* app_queue.c: Fix announcements when announce-to-first-user not enabled.

	  The previous patch for ASTERISK-27216 made it so you wouldn't get any
	  position or periodic announcements unless you had announce-to-first-user
	  enabled.  The announce-to-first-user feature was added by ASTERISK_21782
	  as a result of the patch which introduced the redundant announcements that
	  ASTERISK-27216 removes.

	  * By noting that the makeannouncement variable is used to suppresses the
	  first user announcement, we set its initial value to the
	  announce-to-first-user enable setting.

	  ASTERISK-27216

	  Change-Id: Ieaeb7dbea8ae7073086b775fbafe0625b000b10a

2017-09-21 14:43 +0000 [80097676e7]  Richard Mudgett <rmudgett@digium.com>

	* heap.c: No need to calloc heap pointer array.

	  Change-Id: I5ae2f316229f336eb90d99c7af7ed07a33097e68

2017-09-27 13:45 +0000 [d1de7948fe]  George Joseph <gjoseph@digium.com>

	* logger:  Bring back ability to  turn debug on by source file

	  Somewhere along the way we lost the ability to debug individual
	  source files.  For modules, this wasn't a big deal but all the
	  source files in ./main are in the one "core" module so debugging
	  individual core capabilities was almost impossible.

	  * Added a test to DEBUG_ATLEAST that also checks __FILE__ instead
	  of just module name.  Any source file will work even if it's in
	  a module subdirectory.

	  Change-Id: Icc0af41837f3b1679dec7af21fa32cd1f7469f6e

2017-09-28 05:33 +0000 [f21408c866]  Joshua Colp <jcolp@digium.com>

	* res_stasis: Add 'video_sfu' as a requested bridge type.

	  This change adds 'video_sfu' as a requested bridge type when
	  creating a bridge. By specifying this a mixing type bridge is
	  created that exchanges video in an SFU fashion.

	  Change-Id: I2ada47cf5f3fc176518b647c0b4aa39d55339606

2017-09-27 11:16 +0000 [a6dc0527a2]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_publish.c: Fix misplaced parenthesis.

	  The pjsip_publishc_init() call was referenced with a misplaced
	  parentheses.  As a result, outbound publication messages went out with an
	  expiration of 1 second.

	  ASTERISK-27298

	  Change-Id: I93622eabc8ee83e7a22e98c107f921284c605a08

2017-09-26 11:01 +0000 [61ea872233]  George Joseph <gjoseph@digium.com>

	* pjsip_message_filter: Fix regression causing bad contact address

	  The "res_pjsip:  Filter out non SIP(S) requests" commit moved the
	  filtering of messages to pjproject's PJSIP_MOD_PRIORITY_TRANSPORT_LAYER
	  in order to filter out incoming bad uri schemes as early as possible.
	  Since the change affected outgoing messages as well and the TRANSPORT
	  layer is the last to be run on outgoing messages, we were overwriting
	  the setting of external_signaling_address (which is set earlier by
	  res_pjsip_nat) with an internal address.

	  * pjsip_message_filter now registers itself as a pjproject module
	  twice.  Once in the TSX layer for the outgoing messages (as it was
	  originally), then a second time in the TRANSPORT layer for the
	  incoming messages to catch the invalid uri schemes.

	  ASTERISK-27295
	  Reported by: Sean Bright

	  Change-Id: I2c90190c43370f8a9d1c4693a19fd65840689c8c

2017-09-13 21:31 +0000 [9d65057cdf]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Fix bridge_p2p_rtp_write() reentrancy potential.

	  The bridge_p2p_rtp_write() has potential reentrancy problems.

	  * Accessing the bridged RTP members must be done with the instance1 lock
	  held.  The DTMF and asymmetric codec checks must be split to be done with
	  the correct RTP instance struct locked.  i.e., They must be done when
	  working on the appropriate side of the point to point bridge.

	  * Forcing the RTP mark bit was referencing the wrong side of the point to
	  point bridge.  The set mark bit is used everywhere else to set the mark
	  bit when sending not receiving.

	  The patches for ASTERISK_26745 and ASTERISK_27158 did not take into
	  account that not everything carried by RTP uses a codec.  The telephony
	  DTMF events are not exchanged with a codec.  As a result when
	  RFC2833/RFC4733 sent digits you would crash if "core set debug 1" is
	  enabled, the DTMF digits would always get passed to the core even though
	  the local native RTP bridge is active, and the DTMF digits would go out
	  using the wrong SSRC id.

	  * Add protection for non-format payload types like DTMF when updating the
	  lastrxformat and lasttxformat.  Also protect against non-format payload
	  types when checking for asymmetric codecs.

	  ASTERISK-27292

	  Change-Id: I6344ab7de21e26f84503c4d1fca1a41579364186

2017-09-26 10:55 +0000 [c9e972a26a]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk: Trim trailing byte off of SDES packet

	  This could have been fixed by subtracting 1 from the final value of
	  'len' but the way the packet was being constructed was confusing so I
	  took the opportunity to (I think) make it more clear.

	  We were sending 1 extra byte at the end of the SDES RTCP packet which
	  caused Chrome to complain (in its debug log):

	      Too little data (1 byte) remaining in buffer to parse
	      RTCP header (4 bytes).

	  We now send the correct number of bytes.

	  Change-Id: I9dcf087cdaf97da0374ae0acb7d379746a71e81b

2017-09-25 13:00 +0000 [721947ebae]  Sean Bright <sean.bright@gmail.com>

	* webrtc: Allow 'webrtc' to be set on endpoints without dtls_ca_file

	  If using a legitimate certificate from a trusted certificate authority,
	  you don't need to provide CA file.

	  Change-Id: I8623973b4209b44889243716d7880274caed8a6d

2017-09-25 13:09 +0000 [0cbeaa5589]  Sean Bright <sean.bright@gmail.com>

	* pjproject: Patch to correct STUN FINGERPRINT usage

	  Change-Id: I0e453253dff1388b0186b36c754457c1d0d12db6

2017-09-25 12:30 +0000 [b74cbadd05]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_session: outgoing call did not offer all configured codecs

	  For some scenarios when an outgoing call was made only a subset of the
	  configured codecs were offered. If the codecs being offered happened to
	  not have a codec supported by the phone then the call would fail.

	  For instance Alice and Bob both are configured in Asterisk for g722 and ulaw(
	  allow=!all,g722,ulaw). Alice's endpoint however only supports g722 while Bob's
	  only supports ulaw. When Alice calls Bob, Alice negotiates g722 fine with
	  Asterisk. But when Asterisk sends the outgoing offer to Bob it only contains
	  g722 and not both g722 and ulaw, so the call ends.

	  This patch makes it so all the audio codecs configured on the endpoint always
	  get sent, and not just a subset. However priority is given to those codecs that
	  are compatible with the "other side".

	  ASTERISK-27259 #close

	  Change-Id: Iffabc373bd94cd1dc700925dcfe406e12918c696

2017-09-25 10:59 +0000 [08e67f814b]  Richard Mudgett <rmudgett@digium.com>

	* channel.c: Fix invalid reference in conditionaled out code.

	  ASTERISK-27289

	  Change-Id: I7a415948116493050614d9f4fa91ffbe0c21ec4c

2017-09-25 07:25 +0000 [4275ca16a1]  George Joseph <gjoseph@digium.com>

	* build:  A few gcc 7 error fixes

	  Change-Id: I7b5300fbf1af7d88d47129db13ad6dbdc9b553ec

2017-09-15 02:59 +0000 [c3c73b3511]  Stefan Engström <stefanen@kth.se>

	* app_queue: Only do announcement logic between ringing cycles

	  This patch reverts the change by patch 2263 from old reviewboard.
	  Note that reverting that 2263-patch still preserves the behaviour that
	  the commit log of the 2263-patch claimed to add. The reason for this is:

	  The function wait_for_answer is only called from try_calling which
	  in turn is only called from the main for loop in queue_exec, and
	  earlier in that loop we already check the things that's removed by
	  this patch. There's no need to check those things twice each loop
	  iteration, and I think the proper place to check it is before each
	  ringing cycle. By checking it in wait_for_answer, you allow the issue
	  explained in the jira - that the head caller hears announcements while
	  the agents' sip phones are actively ringing.

	  Reported-by: Stefan Engström
	  Tested-by: Stefan Engström
	  ASTERISK-27216 #close

	  Change-Id: Ic4290dc75256f9743900c6762ee1bb915f672db0

2017-09-23 12:32 +0000 [0fad11f21c]  Sean Bright <sean.bright@gmail.com>

	* app_stream_echo: Don't echo declined streams

	  Discovered while experimenting with Cyber Mega Phone 2K Ultimate Dynamic
	  Edition after accepting the audio request but declining the video one.

	  Change-Id: Iaa86d41fccfbc1b559a30ccf740d78a3b5f8a98c

2017-09-22 17:49 +0000 [601e0c563f]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Reduce (and improve) SDP renegotiation.

	  When pruning a request to change the topology of a channel be
	  more intelligent about the resulting topology that is actually
	  used for SDP renegotiation.

	  In a case where a stream has not already been negotiated we
	  don't need to renegotiate and offer a declined stream. This can
	  occur if something in Asterisk (such as ConfBridge) requests
	  to add video to a PJSIP channel that has no video codecs configured.
	  In this case since the stream did not already exist we can safely
	  remove the stream from the requested topology, resulting in no
	  renegotiation occurring.

	  In a case where a renegotiation is requested with a codec that is
	  not supported we can reuse the formats of the existing stream if
	  it exists to ensure that the stream continues to flow, instead of
	  removing it.

	  Change-Id: I636540798d55922377318fe619c510fb6ed125fb

2017-09-22 15:29 +0000 [36690c26f8]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_session: Don't end session when receiving a 500 on a reinvite

	  During a reinvite, if a remote endpoint error occurs and it returns a 500 the
	  session would end. This patch makes it so the session is not terminated, but
	  continues as it was.

	  The reason for this is because some endpoints may send non session terminating
	  "server errors" like a failed codec negotiation. So in this case instead of
	  ending the call it can hopefully continue. In the case of a real server error
	  the session is already "doomed", will be known soon enough and appropriately
	  ended by Asterisk later.

	  Change-Id: Ifeedae86b8cb44b92d52c79046522ec5f0aff1d5

2017-09-22 10:02 +0000 [ebd0a4bebf]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip: Use ast_sip_is_content_type() where appropriate

	  Change-Id: If3ab0d73d79ac4623308bd48508af2bfd554937d

2017-09-21 09:47 +0000 [6c0e13da22]  George Joseph <gjoseph@digium.com>

	* res_pjsip_session/BUNDLE:  Handle no audio codecs on endpoint

	  When an INVITE came in with both audio and video streams but there
	  were no audio codecs defined for the endpoint, we weren't declining
	  the audio stream.  Since it's usually the first/transport stream,
	  when the video stream was processed and tried to use the transport,
	  it was empty and caused a crash.  We now decline the the stream if
	  there are no matching codecs so when the video stream is processed,
	  it's now the first/transport stream and processes normally.

	  Change-Id: Ic854eda54c95031e66b076ecfae3041d34daa692

2017-09-19 14:28 +0000 [7c93982e9d]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Fix bundled SSRC handling.

	  Assertions in the v15+ AST-2017-008 patches found that we were not
	  handling the case if the incoming SDP did not specify the required SSRC
	  attributes for bundled to work.

	  * Be strict on matching SSRC for bundled instances including the parent
	  instance.  If the SSRC doesn't match then discard the packet.  Bundled has
	  to tell us in the SDP signaling what SSRC to expect.  Otherwise, we will
	  not know how to find the bundled instance structure.

	  Change-Id: I152830bbff71c662408909042068fada39e617f9

2017-09-16 09:19 +0000 [f2985e3106]  Joshua Colp <jcolp@digium.com>

	* bridge: Change participant SFU streams when source streams change.

	  Some endpoints do not like a stream being reused for a new
	  media stream. The frame/jitterbuffer can rely on underlying
	  attributes of the media stream in order to order the packets.
	  When a new stream takes its place without any notice the
	  buffer can get confused and the media ends up getting dropped.

	  This change uses the SSRC change to determine that a new source
	  is reusing an existing stream and then bridge_softmix renegotiates
	  each participant such that they see a new media stream. This
	  causes the frame/jitterbuffer to start fresh and work as expected.

	  ASTERISK-27277

	  Change-Id: I30ccbdba16ca073d7f31e0e59ab778c153afae07

2017-09-20 10:45 +0000 [971548405b]  George Joseph <gjoseph@digium.com>

	* res_pjsip_session:  Change some asserts to warning/debug messages

	  There was an issue reported where an SDP received on a 183 Session
	  Progress message caused a crash because the pending streams had
	  already been processed when the OK was received.  In that case the
	  pending topology was legitimately NULL.  There was an assert for an
	  incorrect number of streams in the topology but not one for
	  topology being NULL.  In any case, if you're not in dev-mode the
	  asserts don't do anything and since the scenario is legit, the
	  asserts weren't appropriate anyway.

	  * Changed several asserts to warning or debug messages and return
	  codes as appropriate.

	  ASTERISK-27264
	  Reported by: Daniel Heckl

	  Change-Id: I58daaa9d2938fa980857ab3ec41925ab5ff9c848

2017-09-19 05:22 +0000 [cad68137a7]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* res_config_pgsql: Fix removed support to previous for versions PostgreSQL 9.1

	  In PostgreSQL 9.1 the backslash are string literals and not the escape
	  of characters.

	  In previous issue ASTERISK_26057 was fixed the use of escape LIKE but the
	  support for old version of Postgresql than 9.1 was dropped. The sentence
	  before make was "ESCAPE '\'" but in version before than 9.1  need it to be
	  as follow "ESCAPE '\\'".

	  ASTERISK-27283

	  Change-Id: I96d9ee1ed7693ab17503cb36a9cd72847165f949

2017-09-15 09:43 +0000 [e666051d79]  Ben Ford <bford@digium.com>

	* res_pjsip_session: Check for removed stream state.

	  When a sip session is refreshed, the stream topology is looped
	  through, checking each stream for compatible formats. This would
	  cause a crash if the stream state was AST_STREAM_STATE_REMOVED,
	  since the formats would never be set for this stream, causing
	  a NULL value to be returned from ast_stream_get_formats. This
	  commit adds a check for streams with removed states.

	  Also removed a stray semicolon.

	  Change-Id: Ic86f8b65a4a26a60885b28b8b1a0b22e1b471d42

2017-09-19 05:44 +0000 [b6aa728a58]  George Joseph <gjoseph@digium.com>

	* chan_pjsip: Ignore AST_CONTROL_STREAM_TOPOLOGY_CHANGED for now

	  chan_pjsip_indicate was missing a case for the recently added
	  AST_CONTROL_STREAM_TOPOLOGY_CHANGED condition and was returning an
	  error and causing the call to be hung up instead of just ignoring
	  it.

	  ASTERISK-27260
	  Reported by: Daniel Heckl

	  Change-Id: I4fecbb00a0b8a853da85155065c1a6bddf235e80

2017-09-07 04:41 +0000 [6b7d5671d1]  Jean Aunis <jean.aunis@prescom.fr>

	* bridge : Fix one-way direct-media when early bridging with native_rtp

	  When two channels were early bridged in a native_rtp bridge, the RTP description
	  on one side was not updated when the other side answered.
	  This patch forbids non-answered channels to enter a native_rtp bridge, and
	  triggers a bridge reconfiguration when an ANSWER frame is received.

	  ASTERISK-27257

	  Change-Id: If1aaee1b4ed9658a1aa91ab715ee0a6413b878df

2017-09-18 09:51 +0000 [1e4c1cec7f]  Alexander Traud <pabstraud@compuserve.com>

	* res_srtp: lower log level of auth failures

	  Previously, sRTP authentication failures were reported on log level WARNING.
	  When such failures happen, each RT(C)P packet is affected, spamming the log.
	  Now, those failures are reported at log level VERBOSE 2. Furthermore, the
	  amount is further reduced (previously all two seconds, now all three seconds).
	  Additionally, the new log entry informs whether media (RTP) or statistics (RTCP)
	  are affected.

	  ASTERISK-16898 #close

	  Change-Id: I6c98d46b711f56e08655abeb01c951ab8e8d7fa0

2017-09-19 10:38 +0000 [b748038230]  George Joseph <gjoseph@digium.com>

	* res_pjsip_pubsub:  Check for Content-Type header in rx_notify_request

	  pubsub_on_rx_notify_request wasn't checking for a null
	  Content-Type header before checking that it was
	  application/simple-message-summary.

	  ASTERISK-27279
	  Reported by: Ross Beer

	  Change-Id: Iec2a6c4d2e74af37ff779ecc9fd35644c5c4ea52

2017-09-19 09:34 +0000 [a5f1d58fe1]  David J. Pryke <david+extra.asterisk@pryke.us>

	* chan_sip: Expose read-only access to the full SIP INVITE Request-URI

	  Provide a way to get the contents of the the Request URI from the initial SIP
	  INVITE in dial plan function call. (In this case "${CHANNEL(ruri)}")

	  ASTERISK-27278
	  Reported by: David J. Pryke
	  Tested by: David J. Pryke

	  Change-Id: I1dd4d6988eed1b6c98a9701e0e833a15ef0dac3e

2017-09-19 07:53 +0000 [6fd3db51e8]  Joshua Colp <jcolp@digium.com>

	* app_confbridge: Only create a channel that records audio.

	  This change makes it so that the conference recorder channel
	  that is created only contains audio formats and an audio stream.
	  This is because the underlying application used by ConfBridge to
	  record, MixMonitor, only allows recording audio.

	  Having additional streams (and in particular a video stream) can
	  result in clients needlessly renegotiating to add a video stream
	  that will never receive video.

	  Change-Id: I89d38aedc9205eca7741d5435e73e73bb9de97a0

2017-09-19 06:34 +0000 [56f0d5fc0f]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* res_config_pgsql: Add missing \n in debug log and update copyright year

	  Change-Id: I4ba338ecbdecc6a814a902eddc4121c8ef3cda58

2017-09-13 14:14 +0000 [55567ee1d8]  Sean Bright <sean.bright@gmail.com>

	* res_calendar: Plug memory leak and micro-optimization

	  ast_variables_destroy is NULL safe, so there is no need to check its
	  argument before passing it.

	  ASTERISK-25524 #close
	  Reported by: Jesper

	  Change-Id: Ib0f8057642e9d471960f1a79fd42e5a3ce587d3b

2017-09-13 03:46 +0000 [1199927fc0]  alex <alexandr.revin@gmail.com>

	* cdr_mysql.c: Apply cdrzone to start and answer

	  Change-Id: I7de0a5adc89824a5f2b696fc22c80fc22dff36b0

2017-08-25 17:01 +0000 [087f667ab1]  Richard Mudgett <rmudgett@digium.com>

	* AST-2017-008: Improve RTP and RTCP packet processing.

	  Validate RTCP packets before processing them.

	  * Validate that the received packet is of a minimum length and apply the
	  RFC3550 RTCP packet validation checks.

	  * Fixed potentially reading garbage beyond the received RTCP record data.

	  * Fixed rtp->themssrc only being set once when the remote could change
	  the SSRC.  We would effectively stop handling the RTCP statistic records.

	  * Fixed rtp->themssrc to not treat a zero value as special by adding
	  rtp->themssrc_valid to indicate if rtp->themssrc is available.

	  ASTERISK-27274

	  Make strict RTP learning more flexible.

	  Direct media can cause strict RTP to attempt to learn a remote address
	  again before it has had a chance to learn the remote address the first
	  time.  Because of the rapid relearn requests, strict RTP could latch onto
	  the first remote address and fail to latch onto the direct media remote
	  address.  As a result, you have one way audio until the call is placed on
	  and off hold.

	  The new algorithm learns remote addresses for a set time (1.5 seconds)
	  before locking the remote address.  In addition, we must see a configured
	  number of remote packets from the same address in a row before switching.

	  * Fixed strict RTP learning from always accepting the first new address
	  packet as the new stream.

	  * Fixed strict RTP to initialize the expected sequence number with the
	  last received sequence number instead of the last transmitted sequence
	  number.

	  * Fixed the predicted next sequence number calculation in
	  rtp_learning_rtp_seq_update() to handle overflow.

	  ASTERISK-27252

	  Change-Id: Ia2d3aa6e0f22906c25971e74f10027d96525f31c

2017-09-13 16:23 +0000 [d178f497d2]  George Joseph <gjoseph@digium.com>

	* res_pjsip:  Filter out non SIP(S) requests

	  Incoming requests with non sip(s) URIs in the Request, To, From
	  or Contact URIs are now rejected with
	  PJSIP_SC_UNSUPPORTED_URI_SCHEME (416).  This is performed in
	  pjsip_message_filter (formerly pjsip_message_ip_updater) and is
	  done at pjproject's "TRANSPORT" layer before a request can even
	  reach the distributor.

	  URIs read by res_pjsip_outbound_publish from pjsip.conf are now
	  also checked for both length and sip(s) scheme.  Those URIs read
	  by outbound registration and aor were already being checked for
	  scheme but their error messages needed to be updated to include
	  scheme failure as well as length failure.

	  Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460

2017-09-14 07:54 +0000 [01f2220bec]  Joshua Colp <jcolp@digium.com>

	* tcptls: Change error message to debug.

	  The Websocket implementation will steal the underlying stream of
	  TCP/TLS sessions. This results in an error message being output
	  about a stream not being present when in reality this is actually
	  fine.

	  This change moves it to a debug message instead.

	  Change-Id: I66cc639080b4b4599beadb4faa7d313f2721d094

2017-09-13 14:08 +0000 [d8112cd98b]  Sean Bright <sean.bright@gmail.com>

	* res_calendar: Various fixes

	  * The way that we were looking at XML elements for CalDAV was extremely
	    fragile, so use SAX2 for increased robustness.

	  * Don't complain about a 'channel' not be specified if autoreminder is
	    not set. Assume that if 'channel' is not set, we don't want to be
	    notified.

	  * Fix some truncated CLI output in 'calendar show calendar' and make the
	    'Autoreminder' description a bit more clear

	  ASTERISK-24588 #close
	  Reported by: Stefan Gofferje

	  ASTERISK-25523 #close
	  Reported by: Jesper

	  Change-Id: I200d11afca6a47e7d97888f286977e2e69874b2c

2017-09-13 09:38 +0000 [eec0396395]  Sean Bright <sean.bright@gmail.com>

	* chan_rtp: Use μ-law by default instead of signed linear

	  Multicast/Unicast RTP do not use SDP so we need to use a format that
	  cleanly maps to one of the static RTP payload types. Without this
	  change, an Originate to a Multicast or Unicast channel without a format
	  specified would produce no audio on the receiving device.

	  ASTERISK-21399 #close
	  Reported by: Tzafrir Cohen

	  Change-Id: I97e332b566e85da04b0004b9b0daae746cfca0e3

2017-09-11 05:46 +0000 [446d48fd49]  George Joseph <gjoseph@digium.com>

	* res_pjsip:  Add handling for incoming unsolicited MWI NOTIFY

	  A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
	  receive unsolicited MWI NOTIFY requests and make them available to
	  other modules via the stasis message bus.

	  res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
	  that parses a simple-message-summary body and, if
	  endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
	  with the voice-message counts from the message.

	  Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c

2017-09-08 21:41 +0000 [4889574ff5]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Add doxygen to RTCP payload types.

	  Change-Id: I3f20ce428777cc4ce9c13b2f808d29ff8c873998

2017-09-11 05:52 +0000 [f9bad3bd61]  George Joseph <gjoseph@digium.com>

	* alembic:  Fix typo in add_auto_info_to_endpoint_dtmf_mode

	  The downgrade function was missing "_v2" at the end of the
	  alter column type.

	  Change-Id: Iaa9bcef48d6f3590ce07a61342d8e66f00263d8e

2017-09-10 06:17 +0000 [680aba21ec]  Walter Doekes <walter+asterisk@wjd.nu>

	* res/res_pjsip: Fix localnet checks in pjsip, part 2.

	  In 45744fc53, I mistakenly broke SDP media address rewriting by
	  misinterpreting which address was checked in the localnet comparison.

	  Instead of checking the remote peer address to decide whether we need
	  media address rewriting, we check our local media address: if it's
	  local, then we rewrite. This feels awkward, but works and even made
	  directmedia work properly if you set local_net. (For the record: for
	  local peers, the SDP media rewrite code is not called, so the
	  comparison does no harm there.)

	  ASTERISK-27248 #close

	  Change-Id: I566be1c33f4d0a689567d451ed46bab9c3861d4f

2017-09-08 21:19 +0000 [c8d53a1638]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* cdr_pgsql: Refactor magic number by definition for version

	  Change-Id: I43f25976aa3069793ddbe0086833965a6fb0a518

2017-09-05 11:13 +0000 [e9a81157ac]  Florian Floimair <f.floimair@commend.com>

	* alembic: Add support for MS-SQL

	  MS-SQL has no native Enum-type support and therefore
	  needs to work with constraints.
	  Since these constraints need unique names the suggested approach
	  referenced in the following alembic documentation has been applied:
	  http://bit.ly/2x9r8pb

	  ASTERISK-27255 #close

	  Change-Id: I8b579750dae0c549f1103ee50172644afb9b2f95

2017-09-05 07:31 +0000 [525f84bb35]  Jacek Konieczny <j.konieczny@eggsoft.pl>

	* func_cdr: honour 'u' flag on dummy channel

	  Fixes ${CDR(...,u)} when used in cdr_custom.conf

	  ASTERISK-27165 #close

	  Change-Id: Ia4e0b6ba93e03d27886354c279737790e2cd6a83

2017-09-06 10:50 +0000 [2b3f903e6f]  Sean Bright <sean.bright@gmail.com>

	* app_waitforsilence: Cleanup & don't treat missing frames as 'noise'

	  * WaitForSilence completes successfully if it receives no media in the
	    specified timeout, but when acting as WaitForNoise that logic needs
	    to be reversed.

	  * Use standard argument parsing macros and add some error checking for
	    invalid values.

	  * The documentation indicated that the first argument to both
	    WaitForSilence and WaitForNoise was required when it was not. Update
	    the documentation to reflect that.

	  * Wrap up some behavior in structs to avoid boolean checks all over the
	    place.

	  ASTERISK-24066 #close
	  Reported by: M vd S

	  Change-Id: I01d40adc5b63342bb5018a1bea2081a0aa191ef9

2017-09-06 16:05 +0000 [5553644284]  Scott Griepentrog <scott@griepentrog.com>

	* chan_sip: when getting sip pvt return failure if not found

	  In handle_request_invite, when processing a pickup, a call
	  is made to get_sip_pvt_from_replaces to locate the pvt for
	  the subscription. The pvt is assumed to be valid when zero
	  is returned indicating no error, and is dereferenced which
	  can cause a crash if it was not found.

	  This change checks the not found case and returns -1 which
	  allows the calling code to fail appropriately.

	  ASTERISK-27217 #close
	  Reported-by: Bryan Walters

	  Change-Id: I6bee92b8b8b85fcac3fd66f8c00ab18bc1765612

2017-09-06 13:38 +0000 [23571f31ac]  Richard Mudgett <rmudgett@digium.com>

	* stasis/control.c: Fix set_interval_hook() ref leak.

	  Change-Id: Ia0edb7dc0dbbb879c079ff7000f1b722d86ce7dc

2017-09-01 05:17 +0000 [94091c7b96]  George Joseph <gjoseph@digium.com>

	* stasis/control:  Fix possible deadlock with swap channel

	  If an error occurs during a bridge impart it's possible that
	  the "bridge_after" callback might try to run before
	  control_swap_channel_in_bridge has been signalled to continue.
	  Since control_swap_channel_in_bridge is holding the control lock
	  and the callback needs it, a deadlock will occur.

	  * control_swap_channel_in_bridge now only holds the control
	    lock while it's actually modifying the control structure and
	    releases it while the bridge impart is running.
	  * bridge_after_cb is now tolerant of impart failures.

	  Change-Id: Ifd239aa93955b3eb475521f61e284fcb0da2c3b3

2017-09-06 05:23 +0000 [67a2ca31f5]  Vitezslav Novy <a1@vnovy.net>

	* chan_sip: Do not change IP address in SDP origin line (o=) in SIP reINVITE

	  If directmedia=yes is configured, when call is answered, Asterisk sends reINVITE
	  to both parties to set up media path directly between the endpoints.
	  In this reINVITE msg SDP origin line (o=) contains IP address of endpoint
	  instead of IP of asterisk. This behavior violates RFC3264, sec 8:
	  "When issuing an offer that modifies the session,
	  the "o=" line of the new SDP MUST be identical to that in the
	  previous SDP, except that the version in the origin field MUST
	  increment by one from the previous SDP."
	  This patch assures IP address of Asterisk is always sent in
	  SDP origin line.

	  ASTERISK-17540
	  Reported by:  saghul

	  Change-Id: I533a047490c43dcff32eeca8378b2ba02345b64e

2017-09-06 07:54 +0000 [0cbb17ce8f]  George Joseph <gjoseph@digium.com>

	* alembic: Fix enum creation for dtls_fingerprint

	  Change-Id: Ic061c5066a146616a68376881c7e4cf6d6e7e7db

2017-09-05 11:08 +0000 [a133c5cc53]  Florian Floimair <f.floimair@commend.com>

	* alembic: fix erroneous commit for add_prune_on_boot

	  Added include for postgresql ENUM type and
	  redefined values in the same way as in the
	  other migration scripts.

	  ASTERISK-27254 #close

	  Change-Id: Id667304cdf3891b1c2f7d35fab3e2a84026159fa

2017-09-06 03:02 +0000 [2d395793b7]  Alexander Traud <pabstraud@compuserve.com>

	* res_srtp: Add support for libsrtp2.1.

	  Asterisk is able to use libSRTP 2.0.x. However since libSRTP 2.1.x, the macro
	  SRTP_AES_ICM got renamed to SRTP_AES_ICM_128. Beside to still compile with
	  previous versions of libSRTP, this change allows libSRTP 2.1.x as well.

	  ASTERISK-27253 #close

	  Change-Id: I2e6eb3c3bc844fee8a624060a2eb6f182dc70315

2017-09-05 09:35 +0000 [bfc29de3ea]  Ben Ford <bford@digium.com>

	* chan_pjsip: Suppress frame warnings.

	  When rtp_keepalive is on for a PJSIP endpoint dialing to another
	  Asterisk instance also using PJSIP, Asterisk will continue to print
	  warning messages about not being able to send frames of a certain
	  type. This suppresses that warning message.

	  Change-Id: I0332a05519d7bda9cacfa26d433909ff1909be67

2017-09-05 10:05 +0000 [c3a6c8fd2d]  Sean Bright <sean.bright@gmail.com>

	* formats: Restore previous fread() behavior

	  Some formats are able to handle short reads while others are not, so
	  restore the previous behavior for the format modules so that we don't
	  have spurious errors when playing back files.

	  ASTERISK-27232 #close
	  Reported by: Jens T.

	  Change-Id: Iab7f52b25a394f277566c8a2a4b15a692280a300

2017-09-05 09:16 +0000 [f856d9b42b]  Walter Doekes <walter+asterisk@wjd.nu>

	* res/res_pjsip: Standardize/fix localnet checks across pjsip.

	  In 2dee95cc (ASTERISK-27024) and 776ffd77 (ASTERISK-26879) there was
	  confusion about whether the transport_state->localnet ACL has ALLOW or
	  DENY semantics.

	  For the record: the localnet has DENY semantics, meaning that "not in
	  the list" means ALLOW, and the local nets are in the list.

	  Therefore, checks like this look wrong, but are right:

	      /* See if where we are sending this request is local or not, and if
	         not that we can get a Contact URI to modify */
	      if (ast_apply_ha(transport_state->localnet, &addr) != AST_SENSE_ALLOW) {
	          ast_debug(5, "Request is being sent to local address, "
	                       "skipping NAT manipulation\n");

	  (In the list == localnet == DENY == skip NAT manipulation.)

	  And conversely, other checks that looked right, were wrong.

	  This change adds two macro's to reduce the confusion and uses those
	  instead:

	      ast_sip_transport_is_nonlocal(transport_state, addr)
	      ast_sip_transport_is_local(transport_state, addr)

	  ASTERISK-27248 #close

	  Change-Id: Ie7767519eb5a822c4848e531a53c0fd054fae934

2017-09-05 08:39 +0000 [68bcfccd52]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Preserve stream name during renegotiation.

	  Stream names within Asterisk can have meaning so when an externally
	  initiated renegotiation occurs we need to preserve the name of
	  the stream if it already exists.

	  Change-Id: I29f50d0cc7f3238287d6d647777e76e1bdf8c596

2017-09-05 07:50 +0000 [0ec95515f3]  George Joseph <gjoseph@digium.com>

	* res_calendar*, res_smdi: Move to "extended" support

	  Change-Id: I31eee8be30c6b0fc3dadb31111dd47742da8892d

2017-09-05 05:23 +0000 [9b3f6d26bd]  George Joseph <gjoseph@digium.com>

	* res_pjsip_t38:  Make t38_reinvite_response_cb tolerant of NULL channel

	  t38_reinvite_response_cb can get called by res_pjsip_session's
	  session_inv_on_tsx_state_changed in situations where session->channel
	  is NULL.  If it is, the ast_log warning segfaults because it tries
	  to get the channel name from a NULL channel.

	  * Check session->channel and print "unknown channel" when it's NULL.

	  ASTERISK-27236
	  Reported by: Ross Beer

	  Change-Id: I4326e288d36327f6c79ab52226d54905cdc87dc7

2017-09-01 16:17 +0000 [60b44d1e38]  Sean Bright <sean.bright@gmail.com>

	* rtp_engine: Prevent possible double free with DTLS config

	  ASTERISK-27225 #close
	  Reported by: Richard Kenner

	  Change-Id: I097b81734ef730f8603c0b972909d212a3a5cf89

2017-09-01 13:15 +0000 [ef8eb9d11b]  Sean Bright <sean.bright@gmail.com>

	* chan_ooh323: Fix confusing indentation warning

	  ASTERISK-27177 #close
	  Reported by: Tzafrir Cohen

	  Change-Id: I40311c404edb2302a7543ad5ca7a06b2a38f2d97

2017-09-01 09:51 +0000 [1bdbefbe76]  Sean Bright <sean.bright@gmail.com>

	* app_directory: Handle a NULL mailbox without crashing

	  ASTERISK-27241 #close
	  Reported by: David Moore

	  Change-Id: Ibbbca85517b04c315406ebfe3b6f7e0763daedc6

2017-07-24 10:48 +0000 [f78f5278ff]  George Joseph <gjoseph@digium.com>

	* pjsip_message_ip_updater:  Fix issue handling "tel" URIs

	  sanitize_tdata was assuming all URIs were SIP URIs so when a non
	  SIP uri was in the From, To or Contact headers, the unconditional
	  cast of a non-pjsip_sip_uri structure to pjsip_sip_uri caused
	  a segfault when trying to access uri->other_param.

	  * Added PJSIP_URI_SCHEME_IS_SIP(uri) || PJSIP_URI_SCHEME_IS_SIPS(uri)
	    checks before attempting to cast or use the returned uri.

	  ASTERISK-27152
	  Reported-by: Ross Beer

	  Change-Id: Id380df790e6622c8058a96035f8b8f4aa0b8551f

2017-07-01 19:24 +0000 [1bf3dfffd7]  Corey Farrell <git@cfware.com>

	* AST-2017-006: Fix app_minivm application MinivmNotify command injection

	  An admin can configure app_minivm with an externnotify program to be run
	  when a voicemail is received.  The app_minivm application MinivmNotify
	  uses ast_safe_system() for this purpose which is vulnerable to command
	  injection since the Caller-ID name and number values given to externnotify
	  can come from an external untrusted source.

	  * Add ast_safe_execvp() function.  This gives modules the ability to run
	  external commands with greater safety compared to ast_safe_system().
	  Specifically when some parameters are filled by untrusted sources the new
	  function does not allow malicious input to break argument encoding.  This
	  may be of particular concern where CALLERID(name) or CALLERID(num) may be
	  used as a parameter to a script run by ast_safe_system() which could
	  potentially allow arbitrary command execution.

	  * Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
	  instead of ast_safe_system() to avoid command injection.

	  * Document code injection potential from untrusted data sources for other
	  shell commands that are under user control.

	  ASTERISK-27103

	  Change-Id: I7552472247a84cde24e1358aaf64af160107aef1

2017-05-22 10:36 +0000 [7f2a60fb38]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Only learn a new source in learn state.

	  This change moves the logic which learns a new source address
	  for RTP so it only occurs in the learning state. The learning
	  state is entered on initial allocation of RTP or if we are
	  told that the remote address for the media has changed. While
	  in the learning state if we continue to receive media from
	  the original source we restart the learning process. It is
	  only once we receive a sufficient number of RTP packets from
	  the new source that we will switch to it. Once this is done
	  the closed state is entered where all packets that do not
	  originate from the expected source are dropped.

	  The learning process has also been improved to take into
	  account the time between received packets so a flood of them
	  while in the learning state does not cause media to be switched.

	  Finally RTCP now drops packets which are not for the learned
	  SSRC if strict RTP is enabled.

	  ASTERISK-27013

	  Change-Id: I56a96e993700906355e79bc880ad9d4ad3ab129c

2017-08-30 07:28 +0000 [5ba82cedc6]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Allow remote SSRC to change on an RTP instance.

	  When SDP renegotiation occurs it is possible for an RTP
	  instance to be reused for a new stream, resulting in the remote
	  SSRC changing if it is part of a bundle group. This change
	  allows this and updates its mapping in the current bundle
	  group.

	  ASTERISK-27231

	  Change-Id: I6e3703974f236bc024c5dbe9bd43adae0c6fb490

2017-08-25 21:06 +0000 [71be8d5bbe]  Andre Nazario <samoied@users.sourceforge.net>

	* chan_pjsip: Add tag info in CHANNEL function

	  Create local_tag and remote_tag in CHANNEL info to get tag from From and
	  To headers of a SIP dialog.

	  ASTERISK-27220

	  Change-Id: I59b16c4b928896fcbde02ad88f0e98922b15d524

2017-08-29 14:22 +0000 [4650fc477a]  Richard Mudgett <rmudgett@digium.com>

	* bridge_native_rtp.c: Fixup native_rtp_framehook()

	  * Fix framehook to test frame type for control frame.
	  * Made framehook exit early if frame type is not a control frame.
	  * Eliminated RAII_VAR in framehook.
	  * Use switch instead of else-if ladder for control frame handling.

	  Change-Id: Ia555fc3600bd85470e3c0141147dbe3ad07c1d18

2017-08-29 09:26 +0000 [06cc5ae9ff]  Sean Bright <sean.bright@gmail.com>

	* confbridge: Handle user hangup during name recording

	  This prevents orphaned CBAnn channels from getting stuck in the bridge.

	  ASTERISK-26994 #close
	  Reported by: James Terhune

	  Change-Id: I5e43e832a9507ec3f2c59752cd900b41dab80457

2017-08-24 11:45 +0000 [9a9589e8e1]  Joshua Colp <jcolp@digium.com>

	* core: Reduce video update queueing.

	  A video update frame is used to indicate that a channel
	  with video negotiated should provide a full frame so the
	  decoder decoding the stream is able to do so. In situations
	  where a queue is used to store frames it makes no sense
	  for the queue to contain multiple video update frames. One
	  is sufficient to have a full frame be sent.

	  ASTERISK-27222

	  Change-Id: Id3f40a6f51b740ae4704003a1800185c0c658ee7

2017-08-25 13:44 +0000 [da13cdb9e7]  Sean Bright <sean.bright@gmail.com>

	* voicemail: Fix various abuses of mkstemp

	  mkstemp() returns a unique filename, but appending an extension to that
	  filename does not guarantee uniqueness. Instead, use mkdtemp() and we
	  can put whatever extension we want on the files that we create inside
	  the directory.

	  In the case of app_minivm, we also now properly clean up any temporary
	  files that we create.

	  ASTERISK-20858 #close
	  Reported by: Walter Doekes

	  Change-Id: I30ad04f0e115f0b11693ff678ba5184d8b938e43

2017-08-25 12:20 +0000 [43670e471f]  Sean Bright <sean.bright@gmail.com>

	* app_record: Resolve some absolute vs. relative filename bugs

	  If the Record() application is called with a relative filename that
	  includes directories, we were not properly creating the intermediate
	  directories and Record() would fail.

	  Secondarily, updated the documentation for RECORDED_FILE to mention
	  that it does not include a filename extension.

	  Finally, rewrote the '%d' functionality to be a bit more straight
	  forward and less noisy.

	  ASTERISK-16777 #close
	  Reported by: klaus3000

	  Change-Id: Ibc2640cba3a8c7f17d97b02f76b7608b1e7ffde2

2017-08-23 10:01 +0000 [2ee644aacf]  Florian Floimair <f.floimair@commend.com>

	* alembic: Add dtls_fingerprint column in ps_endpoints table

	  The ps_endpoints table was missing the dtls_fingerprint column
	  introduced with commit adba2a8d7fd.

	  ASTERISK-27168 #close

	  Change-Id: I9cb5006f7f50718b5239919562773adabb334cfd

2017-08-21 04:28 +0000 [33a648d4c6]  Torrey Searle <torrey@voxbone.com>

	* res/res_pjsip_session: allow SDP answer to be regenerated

	  If an SDP answer hasn't been sent yet, it's legal to change it.
	  This is required for PJSIP_DTMF_MODE to work correctly, and can
	  also have use in the future for updating codecs too.

	  ASTERISK-27209 #close

	  Change-Id: Idbbfb7cb3f72fbd96c94d10d93540f69bd51e7a1

2017-08-24 09:42 +0000 [02f95d290f]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Evaluate realtime queues when running dialplan functions

	  ASTERISK-19103 #close
	  Reported by: Jim Van Meggelen

	  Change-Id: I4bd32a9d1fcebb8ac56bff0e084d4f53e31b692b

2017-08-23 09:19 +0000 [b1097be134]  Eelco Brolman (License 6442)

	* app_voicemail: Honor escape digits in "greeting only" mode

	  ASTERISK-21241 #close
	  Reported by: Eelco Brolman
	  Patches:
	  	Patch uploaded by Eelco Brolman (License 6442)

	  Change-Id: Icbe39b5c82a49b46cf1d168dc17766f3d84f54fe

2017-08-24 08:35 +0000 [7937d5b8b3]  Sean Bright <sean.bright@gmail.com>

	* res_smdi: Clean up memory leak

	  Change-Id: I1e33290929e1aa7c5b9cb513f8254f2884974de8

2017-08-18 17:37 +0000 [f2c14f00b8]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Fix crash when declining an active stream.

	  If a previously active stream is declined we could crash because the
	  channel's thread is still using the stream while we are updating the
	  topology in the serializer thread.

	  * Defer removing any declined stream's handler until we have blocked the
	  channel's thread with the channel lock.

	  ASTERISK-27212

	  Change-Id: I50e1d3ef26f8e41948f4c411ee329aa3b960a420

2017-08-16 17:50 +0000 [17976d1b4e]  Richard Mudgett <rmudgett@digium.com>

	* bridge_channel.c: Fix FRACK when mapping frames to the bridge.

	  * Add protection checks when mapping streams to the bridge.  The channel
	  and bridge may be in the process of updating the stream mapping when a
	  media frame comes in so we may not be able to map the frame at the time.

	  * We need to map the streams to the bridge's stream numbers right before
	  they are written into the bridge.  That way we don't have to keep
	  locking/unlocking the bridge and we won't have any synchronization
	  problems before the frames actually go into the bridge.

	  * Protect the deferred queue with the bridge_channel lock.

	  ASTERISK-27212

	  Change-Id: Id6860dd61b594b90c8395f6e2c0150219094c21a

2017-08-11 16:31 +0000 [9c70c88369]  Richard Mudgett <rmudgett@digium.com>

	* channel: Fix topology API locking.

	  * ast_channel_request_stream_topology_change() must not be called with any
	  channel locks held.

	  * ast_channel_stream_topology_changed() must be called with only the
	  passed channel lock held.

	  ASTERISK-27212

	  Change-Id: I843de7956d9f1cc7cc02025aea3463d8fe19c691

2017-08-16 15:22 +0000 [6ad8249233]  Richard Mudgett <rmudgett@digium.com>

	* bridge: Fix softmix bridge deadlock.

	  * Fix deadlock in
	  bridge_softmix.c:softmix_bridge_stream_topology_changed() between
	  bridge_channel and channel locks.

	  * The new bridge technology topology change callbacks must be called with
	  the bridge locked.  The callback references the bridge channel list, the
	  bridge technology could change, and the bridge stream mapping is updated.

	  ASTERISK-27212

	  Change-Id: Ide4360ab853607e738ad471721af3f561ddd83be

2017-08-14 12:20 +0000 [850a3fd017]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip.c: Fix topology refresh response code accuracy.

	  There are other 1xx and 2xx codes than 100 and 200 respectively.

	  Change-Id: I680db0997343256add1478714f5bf5b5569aee17

2017-08-11 17:06 +0000 [87c7a1c79c]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c: Restored softmix_bridge_leave() shortcut exit.

	  Change-Id: I13026cd90954e0265eab94a0faf635a3e11f0e35

2017-08-17 17:07 +0000 [5bbf7b2aad]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Document sfu video_mode value.

	  Change-Id: I26e17df2c93f3933b23f78070603adbcc84ba204

2017-08-17 17:06 +0000 [f96536b1ea]  Richard Mudgett <rmudgett@digium.com>

	* confbridge.h: Fix doxygen comments.

	  Change-Id: I16133166a85fdb557c66ffcbfe8128d0b4725b0e

2017-08-11 11:40 +0000 [946ef2d711]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c: Remove always true test.

	  Change-Id: I26238df2ff0d0f6dfe95c3aa35da588f1ee71727

2017-08-17 16:46 +0000 [22af5e3784]  Sungtae Kim <pchero21@gmail.com>

	* app_queue: Fix initial hold time queue statistic

	  Fixed to use correct initial value and fixed to use the
	  correct queue info to check the first value.

	  ASTERISK-27204

	  Change-Id: Ia9e36c828e566e1cc25c66f73307566e4acb8e73

2017-08-20 08:15 +0000 [83b81d1f8d]  Michael Kuron <m.kuron@gmx.de>

	* res_xmpp: fix inverted return code check in OAuth

	  fetch_access_token calls func_curl via ast_func_read. The latter returns 0 upon
	  success and -1 if the function is not available.
	  This commit inverts the return code check so that an error is printed if the
	  module is not loaded and not if it is loaded.

	  ASTERISK-27207 #close

	  Change-Id: I9ef903f80702d1218e8701f65a4e5e918e6548fb

2017-08-17 12:00 +0000 [667986d875]  Sean Bright <sean.bright@gmail.com>

	* res_calendar_icalendar: Properly handle recurring events

	  When looking for recurring events, use the correct end time based on the
	  configured 'timeframe.'

	  ASTERISK-27174 #close
	  Reported by: Mark Thompson

	  Change-Id: Id90c3cfc79d561a5521d79be176683e225f2edef

2017-08-16 15:43 +0000 [0e777258be]  George Joseph <gjoseph@digium.com>

	* Fix downloader not working with curl

	  The codec/dpma downloader wasn't handling curl correctly.  The logic
	  that transforms makeopts into a bash-sourceable file wasn't
	  handling the make 'or' command in DOWNLOAD_TIMEOUT so bash was
	  looking for an 'or' command.

	  That logic has been eliminated.  Instead of trying to transform
	  and source makeopts, the downloader now calls a make scriptlet
	  to print the value of a specific variable.  This way, make handles
	  the ors (or any other make construct that happens to creep into
	  that file).

	  ASTERISK-27202
	  Reported by: Sean McCord

	  Change-Id: Iadfb6693528e4d4da7b8bb201fa66da2c71c7f99

2017-08-15 13:12 +0000 [e4e2e53c8a]  Kevin Harwell <kharwell@digium.com>

	* manager: hook event is not being raised

	  When the iostream code went in it introduced a conditional that made it so the
	  hook event was not being raised even if a hook is present. This patch adds a
	  check to see if a hook is present in astman_append. If so then call into the
	  send_string function, which in turn raises the even for specified hook.

	  Also updated the ami hooks unit test, so the test could be automated.

	  ASTERISK-27200 #close

	  Change-Id: Iff37f02f9708195d8f23e68f959d6eab720e1e36

2017-08-15 15:15 +0000 [c049d1c3b2]  Richard Mudgett <rmudgett@digium.com>

	* configure: Check cache for valid pjproject tarball before downloading.

	  On a fresh Asterisk source directory, the bundled pjproject tarball is
	  unconditionally downloaded even if the tarball is already in a specified
	  cache directory.

	  * Made check if the pjproject tarball is valid in the cache directory
	  before downloading the tarball on a fresh source directory.

	  Change-Id: Ic7ec842d3c97ecd8dafbad6f056b7fdbce41cae5

2017-08-15 11:14 +0000 [9e2b2a9837]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix prune_on_boot to remove only contacts for the host.

	  * Check that the contact's reg_server matches the host's name before
	  deleting any prune_on_boot contacts.  We don't want to delete reliable
	  transport contacts made with other servers if the ps_contacts database
	  table is shared with other servers.

	  Thanks to Ross Beer for pointing out that the original prune logic would
	  delete reliable transport contacts from other servers.

	  ASTERISK-27147

	  Change-Id: I8e439d0d1c266ffdfd7b73d1e5e466180a689bd0

2017-08-04 09:25 +0000 [15fbcc74d8]  Andrey Egorov <andr06@gmail.com>

	* res_xmpp: Google OAuth 2.0 protocol support for XMPP / Motif

	  Add ability to use tokens instead of passwords according to Google OAuth 2.0
	  protocol.

	  ASTERISK-27169
	  Reported by: Andrey Egorov
	  Tested by: Andrey Egorov

	  Change-Id: I07f7052a502457ab55010a4d3686653b60f4c8db

2017-08-10 14:18 +0000 [bd28a9bbd8]  Richard Mudgett <rmudgett@digium.com>

	* STUN/netsock2: Fix some valgrind uninitialized memory findings.

	  * netsock2.c: Test the addr->len member first as it may be the only member
	  initialized in the struct.

	  * stun.c:ast_stun_handle_packet(): The combinded[] local array could get
	  used uninitialized by ast_stun_request().  The uninitialized string gets
	  copied to another location and could overflow the destination memory
	  buffer.

	  These valgrind findings were found for ASTERISK_27150 but are not
	  necessarily a fix for the issue.

	  Change-Id: I55f8687ba4ffc0f69578fd850af006a56cbc9a57

2017-08-02 18:44 +0000 [1bec781cce]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Re-REGISTER on transport shutdown.

	  The fix for the issue is broken up into three parts.

	  This is part three which handles the client side of REGISTER requests.
	  The registered contact may no longer be valid on the server when the
	  transport used is reliable and the connection is broken.

	  * Re-REGISTER our contact if the reliable transport is broken after
	  registration completes.  We attempt to re-REGISTER immediately to minimize
	  the time we are unreachable.  Time may have already passed between the
	  connection being broken and the loss being detected.

	  * Reorder sip_outbound_registration_state_alloc() so the STATSD_GUAGE's
	  are still correct if an allocation failure happens.

	  ASTERISK-27147

	  Change-Id: I3668405b1ee75dfefb07c0d637826176f741ce83

2017-07-31 14:21 +0000 [82f4ade959]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Remove ephemeral registered contacts on transport shutdown.

	  The fix for the issue is broken up into three parts.

	  This is part two which handles the server side of REGISTER requests when
	  rewrite_contact is enabled.  Any registered reliable transport contact
	  becomes invalid when the transport connection becomes disconnected.

	  * Monitor the rewrite_contact's reliable transport REGISTER contact for
	  shutdown.  If it is shutdown then the contact must be removed because it
	  is no longer valid.  Otherwise, when the client attempts to re-REGISTER it
	  may be blocked because the invalid contact is there.  Also if we try to
	  send a call to the endpoint using the invalid contact then the endpoint is
	  not likely to see the request.  The endpoint either won't be listening on
	  that port for new connections or a NAT/firewall will block it.

	  * Prune any rewrite_contact's registered reliable transport contacts on
	  boot.  The reliable transport no longer exists so the contact is invalid.

	  * Websockets always rewrite the REGISTER contact address and the transport
	  needs to be monitored for shutdown.

	  * Made the websocket transport set a unique name since that is what we use
	  as the ao2 container key.  Otherwise, we would not know which transport we
	  find when one of them shuts down.  The names are also used for PJPROJECT
	  debug logging.

	  * Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state
	  event.  Now the global keep_alive_interval option, initially idle shutdown
	  timer, and the server REGISTER contact monitor can work on wetsocket
	  transports.

	  * Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction.
	  Now initially idle websockets will automatically shutdown.

	  ASTERISK-27147

	  Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4

2017-07-28 18:26 +0000 [1dcb92bba8]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: PJSIP Transport state monitor refactor.

	  The fix for the issue is broken up into three parts.

	  This is part one which refactors the transport state monitor code to allow
	  more modules to be able to monitor transports.

	  * Pull the management of PJPROJECT's transport state callback code from
	  res_pjsip_transport_management.c into res_pjsip.  Now other modules can
	  dynamically add and remove themselves from transport monitoring without
	  worrying about breaking PJPROJECT's callback chain.

	  * Add the ability for other modules to get a callback whenever a specific
	  transport is shutdown.

	  ASTERISK-27147

	  Change-Id: I7d9a31371eb1487c9b7050cf82a9af5180a57912

2017-07-27 15:36 +0000 [ee5edfb050]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_transport_management.c: Rename some variables.

	  * Use monitored instead of the misleading keepalive name.

	  Change-Id: I9e5bcbb4ab2b82d49bcd0f06dfe85d15e0b552b6

2017-08-09 15:24 +0000 [ecd1f87edf]  Richard Mudgett <rmudgett@digium.com>

	* UPGRADE notes: Prepare for the eventual 16 branch.

	  Change-Id: I4ca2f07ed62d77f1fdd10c3b216f6a28dd75720c

2017-08-10 09:09 +0000 [4ed2733dde]  Scott Griepentrog <scott@griepentrog.com>

	* res_pjsip_messaging: IPv6 receive address needs brackets

	  When handling an incoming SIP MESSAGE, PJSIP
	  attaches the IP address that the message was
	  received from to the message in the variable
	  PJSIP_RECVADDR.  When the IP address is IPv6
	  the :PORT appended results in an unparseable
	  mess. By using an additional bit flag on the
	  pj_sockaddr_print call, the conventional use
	  of brackets around the address is achieved.

	  ASTERISK-27193 #close

	  Change-Id: I12342521f2ce87a5b6e4883d480a3fd957aa9fd9

2017-07-26 09:17 +0000 [d430f718f5]  Torrey Searle <torrey@voxbone.com>

	* res_rtp_asterisk: enable rtcp & QOS stats on native bridge

	  Asterisk wasn't generating or forwarding RTCP packets when native
	  bridge was activated.  Also the stats weren't available via
	  CHANNEL(qos). Now the RTCP stats are always calculated.

	  ASTERISK-27158 #close

	  Change-Id: I46fb8f61c95e836b9d2dda6054b0cf205c16037b

2017-07-28 07:53 +0000 [a2dde59154]  Torrey Searle <torrey@voxbone.com>

	* res_rtp_asterisk:  Make P2P bridge Asymmetric codec aware

	  Introduce a new property to rtp-engine to make it aware of
	  the desire for assymetric codecs or not.  If asymmetric codecs
	  is not allowed, the bridge will compare read/write formats
	  and shut down the p2p bridge if needed

	  ASTERISK-26745 #close

	  Change-Id: I0d9c83e5356df81661e58d40a8db565833501a6f

2017-08-08 13:33 +0000 [305bd0d99f]  George Joseph <gjoseph@digium.com>

	* Make --with-pjproject-bundled the default for Asterisk 15

	  '--with-pjproject-bundled' is now the default when running
	  ./configure. It can be disabled with '--without-pjproject-bundled'.

	  To make building without an internet connection easier, a new
	  ./configure option '--with-download-cache' was added that sets
	  the cache for externals (like pjproject, the codecs and the DPMA),
	  AND the sounds files.  It can also be specified as an environment
	  variable named "AST_DOWNLOAD_CACHE".  The existing
	  '--with-sounds-cache' option / SOUNDS_CACHE_DIR env variable and
	  '--with-externals-cache' option / EXTERNALS_CACHE_DIR env variable
	  remain and if specified, will override '--with-downloads-cache'.

	  ASTERISK-27189

	  Change-Id: Ifa9783fddf44aafadb060c9feba713dfa81d38ce

2017-08-05 06:36 +0000 [62092bc114]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Release media resources on session end quicker.

	  A change was made long ago where the session was kept around
	  until the underlying INVITE session had been destroyed. This
	  had the side effect of also keeping the underlying media resources
	  around for this time as well.

	  This change ensures that when we are told to terminate the
	  session we immediately release any media sessions associated
	  with it.

	  ASTERISK-27110

	  Change-Id: I643e431d5c3bf05cda220c1d39e824a505a29b82

2017-07-29 20:03 +0000 [4b58609c33]  Kirill Katsnelson <kkm@smartaction.com>

	* chan_sip: Access incoming REFER headers in dialplan

	  This adds a way to access information passed along with SIP headers in
	  a REFER message that initiates a transfer. Headers matching a dialplan
	  variable GET_TRANSFERRER_DATA in the transferrer channel are added to
	  a HASH object TRANSFER_DATA to be accessed with functions HASHKEY and HASH.

	  The variable GET_TRANSFERRER_DATA is interpreted to be a prefix for
	  headers that should be put into the hash. If not set, no headers are
	  included. If set to a string (perhaps 'X-' in a typical case), all headers
	  starting this string are added. Empty string matches all headers.

	  If there are multiple of the same header, only the latest occurrence in
	  the REFER message is available in the hash.

	  Obviously, the variable GET_TRANSFERRER_DATA must be inherited by the
	  referrer channel, and should be set with the '_' or '__' prefix.

	  I avoided a specific reference to SIP or REFER, as in my mind the mechanism
	  can be generalized to other channel techs.

	  ASTERISK-27162

	  Change-Id: I73d7a1e95981693bc59aa0d5093c074b555f708e

2017-08-06 11:15 +0000 [88c65f7cb6]  Joshua Colp <jcolp@digium.com>

	* bridge: Fix stream topology/participant locking and video misrouting.

	  This change fixes a few locking issues and some video misrouting.

	  1. When accessing the stream topology of a channel the channel lock
	  must be held to guarantee the topology remains valid.

	  2. When a channel was joined to a bridge the bridge specific
	  implementation for stream mapping was not invoked, causing video
	  to be misrouted for a brief period of time.

	  ASTERISK-27182

	  Change-Id: I5d2f779248b84d41c5bb3896bf22ba324b336b03

2017-08-05 14:43 +0000 [16cfc3a954]  Corey Farrell <git@cfware.com>

	* channel: Fix leak on successful call to chan->tech->requester.

	  joint_cap needs to be released unconditionally as chan->tech->requester
	  does not steal the reference even on success.

	  ASTERISK-27180 #close

	  Change-Id: I647728992559bdb0a9c7357c20be1b36400d68b6

2017-08-04 16:47 +0000 [104a8047a5]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_session/_sdp_rtp: Handling of 'msid' is incorrect

	  Currently, the handling of the msid attribute is not quite right. According to
	  the spec the msid's between the offer/answer are not dependent upon one another.
	  Meaning the same msid's given in an offer do not have to be returned in the
	  answer for a given stream. And they probably shouldn't be (copied/reused) since
	  this can potentially cause some browser side confusion.

	  This patch generates new msids when both an offer and answer are sent from
	  Asterisk. However, Asterisk does reuse the original msid it sent out for a
	  reinvite. Also audio+video streams are paired together by sharing the same
	  stream id, but a different track id.

	  ASTERISK-27179 #close

	  Change-Id: Ifaec06dc7e65ad841633a24ebec8c8a9302d6643

2017-08-03 20:58 +0000 [7f8f3ca4dd]  Corey Farrell <git@cfware.com>

	* Correct some leaks in unit tests.

	  * chan_sip: channel in test_sip_rtpqos_1.
	  * test_config: config hook, config info and global config holder.
	  * test_core_format: format in format_attribute_set_without_interface.
	  * test_stream: unneeded frame duplication.
	  * test_taskprocessor: task_data.

	  Change-Id: I94d364d195cf3b3b5de2bf3ad565343275c7ad31

2017-07-26 17:49 +0000 [842e1414d0]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_transport_websocket.c: Fix serializer ref leak.

	  Change-Id: Ib5a19bfd597f63d9021baeb645fc11153b3afa57

2017-08-02 18:41 +0000 [615b6a200a]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Misc fixes.

	  * Remove unnecessary CMP_STOP.

	  * In handle_client_registration() use DEBUG_ATLEAST() to only do work
	  needed for the debug log message when the debug log message is needed.

	  * In sip_outbound_registration_state_destroy() check state->registration
	  for NULL.

	  Change-Id: I656d0fa11dda0b00048103efb1558e67a426fd80

2017-07-31 20:20 +0000 [564927c5ed]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_nat.c: Remove unnecessary CMP_STOP.

	  Change-Id: I6279b0d723bc3b75b8d65e81e02da9ea9bc0c3da

2017-07-31 14:20 +0000 [5655cded78]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_registrar.c: Remove unnecessary CMP_STOP.

	  Most uses of CMP_STOP are superfluous and are only respected when
	  OBJ_MULTIPLE is used to search the container.

	  Change-Id: I20571a202ec0aa1098bb2749eeba18de7ca110b8

2017-08-03 13:13 +0000 [123c93a77c]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Support GMIME 3.0

	  Support building the Asterisk httpd with version 3.0 of gmime as
	  well as earlier versions of that library.

	  ASTERISK-27173

	  Change-Id: I7e13dd05a3083ccb0df2dabf83110223f6a9fa8f

2017-08-02 09:43 +0000 [521b6fed12]  Kevin Harwell <kharwell@digium.com>

	* alembic/res_pjsip: Add "webrtc" configuration option

	  When the "webrtc" option was added in res_pjsip it was not added to the alembic
	  scripts. This patch adds the option for alembic.

	  Also, changed the sorcery configuration type to an OPT_YESNO_T value instead of
	  an OPT_BOOL_T so if this field is ever written to a database it will write out
	  the correct value.

	  ASTERISK-27119 #close

	  Change-Id: I3e199f060aea25e193c439fc5cf96be4d3ed1c7b

2017-07-30 01:17 +0000 [4c0798e91d]  Kirill Katsnelson <kkm@smartaction.com>

	* chan_sip: Add dialplan function SIP_HEADERS

	  Syntax: SIP_HEADERS([prefix])

	  If the argument is specified, only the headers matching the given prefix
	  are returned.

	  The function returns a comma-separated list of SIP header names from an
	  incoming INVITE message. Multiple headers with the same name are included
	  in the list only once. The returned list can be iterated over using the
	  functions POP() and SIP_HEADER().

	  For example, '${SIP_HEADERS(Co)}' might return the string
	  'Contact,Content-Length,Content-Type'.

	  Practical use is rather '${SIP_HEADERS(X-)}' to enumerate optional
	  extended headers sent by a peer.

	  ASTERISK-27163

	  Change-Id: I2076d3893d03a2f82429f393b5b46db6cf68a267

2017-08-02 14:16 +0000 [4b03eb5c38]  Corey Farrell <git@cfware.com>

	* Fix compile error for old versions of GCC.

	  Use -Wno-format-truncation only if supported by compiler.

	  ASTERISK-27171 #close

	  Change-Id: Iac0aed7a5bcaa16c21b7d62c4e4678d244c4ccb6

2017-08-02 16:08 +0000 [148cf2e0f7]  Corey Farrell <git@cfware.com>

	* app_privacy: remove unused header asterisk/image.h

	  Change-Id: I56ed530633a642633b18383821069e806c92ae82

2017-07-26 08:48 +0000 [2be8d91c0f]  snuffy <snuffy22@gmail.com> (license 5024)

	* res_pjsip_pidf_eyebeam_body_supplement: Correct status presentation

	  This change fixes PIDF content generation when the underlying device
	  state is considered in use. Previously it was incorrectly marked
	  as closed meaning they were offline/unavailable. The code now
	  correctly marks them as open.

	  Additionally:

	    * Generate an XML element for our activity instead of a using a text
	      node.

	    * Consider every extension state other than "unavailable" to be 'open'
	      status.

	    * Update the XML namespaces and structure to reflect those
	      documented in RFC 4480

	    * Use 'on-the-phone' (defined in RFC 4880) instead of 'busy' as the
	      "in use" activity. This change results in eyeBeam using the
	      appropriate icon for the watched user.

	  This was tested on eyeBeam 1.5.20.2 build 59030 on Windows.

	  ASTERISK-26659 #close
	  Reported by: Abraham Liebsch
	  patches:
	    ASTERISK-26659.diff submitted by snuffy (license 5024)

	  Change-Id: I6e5ad450f91106029fb30517b8c0ea0c2058c810

2017-07-23 18:34 +0000 [2a4283f3e7]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add support for dnsmgr to external_media_address.

	  The "external_media_address" option on transports is now
	  resolved using dnsmgr. This allows it to be automatically
	  refreshed regularly if refreshes are enabled in dnsmgr.
	  If the system is using a dynamic IP address a dynamic DNS
	  hostname can be provided to keep the IP address up to
	  date.

	  Change-Id: Ia54771720dff0105bde55d5bbb81a3ba437e05b2

2017-07-27 20:58 +0000 [58d032112b]  Corey Farrell <git@cfware.com>

	* Fix compiler warnings on Fedora 26 / GCC 7.

	  GCC 7 has added capability to produce warnings, this fixes most of those
	  warnings.  The specific warnings are disabled in a few places:

	  * app_voicemail.c: truncation of paths more than 4096 chars in many places.
	  * chan_mgcp.c: callid truncated to 80 chars.
	  * cdr.c: two userfields are combined to cdr copy, fix would break ABI.
	  * tcptls.c: ignore use of deprecated method SSLv3_client_method().

	  ASTERISK-27156 #close

	  Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88

2017-07-26 09:27 +0000 [3f98488279]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Add announce-position-only-up option

	  Setting this option will cause the Queue application to only announce
	  the caller's position if it has improved since the last time that we
	  announced it.

	  Change-Id: I173a124121422209485b043e2bf784f54242fce6

2017-07-27 06:35 +0000 [ac6d98b28d]  Ian Gilmour (license 6889)

	* bundled_pjproject:  Improve SSL/TLS error handling

	  OpenSSL has 2 levels or error processing.  It's possible for the
	  top layer to return SSL_ERROR_SYSCALL but the lower layer return
	  no error, in which case processing should continue.  Only the top
	  layer was being examined though so connections were being torn
	  down when they didn't need to be.  This patch adds the examination
	  of the lower level codes, and if they return no errors, allows
	  processing to continue.

	  ASTERISK-27001
	  Reported-by: Ian Gilmour
	  patches:
	  	pjproject-2.6.patch submitted by Ian Gilmour (license 6889)

	  Updated-by: George Joseph and Sauw Ming (Teluu)

	  Merged to upstream pjproject on 7/27/2017 (commit 5631)

	  Change-Id: I23844ca0c68ef1ee550f14d46f6dae57d33b7bd2

2017-06-26 07:52 +0000 [65c560894d]  Torrey Searle <torrey@voxbone.com>

	* chan_pjsip: add a new function PJSIP_DTMF_MODE

	  This function is a replica of SIPDtmfMode, allowing the DTMF mode of a
	  PJSIP call to be modified on a per-call basis

	  ASTERISK-27085 #close

	  Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612

2017-07-25 15:17 +0000 [b3914df10b]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk: Fix mapping of pjsip's ICE roles to ours

	  Change-Id: Ia578ede1a55b21014581793992a429441903278b

2017-07-20 08:08 +0000 [4f4936fd72]  Sergej Kasumovic <sergej@bicomsystems.com>

	* res_stasis_device_state: Unsubscribe should remove old subscriptions

	  Case scenario with Applications ARI:

	  * Once you subscribe to deviceState with Applications REST API, it will be
	  added into subscription pool.

	  * When you unsubscribe it will remove from the device_state_subscription
	  hash table but not from the subscription pool.

	  * When you subscribe again, it will add it to pool again.

	  * Now you will have two subscriptions and you will receive same event
	  twice.

	  This fix should now remove deviceState subscription from pool and it
	  should fix unsubscribe on deviceState.

	  ASTERISK-27130 #close

	  Change-Id: I718b70d770a086e39b4ddba4f69a3c616d4476c4

2017-07-24 13:30 +0000 [a6eb9ee7d2]  Joshua Colp <jcolp@digium.com>

	* core: Add VP9 passthrough support.

	  This change adds VP9 as a known codec and creates a cached
	  "vp9" media format for use.

	  Change-Id: I025a93ed05cf96153d66f36db1839109cc24c5cc

2017-07-19 18:11 +0000 [922930753c]  Richard Mudgett <rmudgett@digium.com>

	* app_voicemail.c: Allow mailbox entry on authentication retry prompt.

	  The following testsuite voicemail tests were failing to re-enter the
	  mailbox after the first login attempt.

	  tests/apps/voicemail/authenticate_invalid_mailbox
	  tests/apps/voicemail/authenticate_invalid_password

	  The tests were noting the start of the vm-incorrect-mailbox prompt and
	  immediately sending the mailbox for the next login attempt.  Since the
	  invalid message playback had to complete before the digits were
	  recognized, the test passed for the wrong reason and added approximately
	  20 seconds to the test times.

	  * Allow the vm-incorrect-mailbox prompt to get interrupted by the mailbox
	  digits like the initial vm-login prompt so the tests are able to enter the
	  intended mailbox.

	  Change-Id: I1dc53fe917bfe03a4587b2c4cd24c94696a69df8

2017-07-21 15:57 +0000 [2697e45157]  Matthew Fredrickson <creslin@digium.com>

	* format.h: Fix a few minor errors in comments.

	  A few minor problems were found in comments in format.h.  This patch fixes them.

	  Change-Id: I07f0bdb47b93359b361c4c3d8ecc87cd3199dd94

2017-07-14 13:47 +0000 [19b080b547]  Rusty Newton <rnewton@digium.com>

	* say.c: Fix file locations for second, seconds, minute, minutes files

	  The seconds and minutes files have always existed in the base language
	  directory of the Core package. So say.c has always been calling the wrong
	  location (under digits/) for those two files and in the case of second and
	  minute they didn't exist in the Core packages at all.

	  The 1.6 sounds release moves the second and minute files into Core from
	  Extra for the languages that already had them. A future release will include
	  the second and minute files for languages that didn't already have them.

	  This patch just changes all the target locations for second, seconds,
	  minute, and minutes that were under the digits subdir to be under the root of
	  sounds instead. Which is where the sounds will be for some languages after 1.6
	  sounds and for all languages after a future release.

	  ASTERISK-25810 #close

	  Change-Id: I05d9d4bee6a7237030530a46e7eb3df15f13f702
	  Reported-by: Nicolas Riendeau

2017-07-21 14:20 +0000 [a2f6028a51]  Rusty Newton <rnewton@digium.com>

	* Sounds: Update Makefile for Extra sounds 1.5.1 release

	  Incrementing version for the Extra sounds release. 1.5.1 Extra sounds
	  removes two prompts that were moved into the Core packages in the 1.6 Core
	  sounds release.

	  ASTERISK-27142 #close

	  Change-Id: I82f017812b0ea9599e19dd4635afd55611f13ee7

2017-07-21 11:17 +0000 [063c9a935f]  George Joseph <gjoseph@digium.com>

	* Update make_ari_stubs in master to make the version 16

	  Ready for next major version

	  Change-Id: If9dc99b3b78768529e69a297d8f87e23582ca6d0

2017-07-21 11:24 +0000 [ba52a36ff2]  George Joseph <gjoseph@digium.com>

	* Restore the incorrectly deleted spandspflow2pcap.log

	  Change-Id: Iafe78cf0fb1e7064223d4dea279eeb776c8fa8e5

2017-07-20 09:57 +0000 [25c9464325]  Sean Bright <sean.bright@gmail.com>

	* corosync: Fix corosync library name in configure.ac

	  Also add new corosync packages to install_prereq.

	  Reported by Travis Ryan in #asterisk-dev

	  Change-Id: Ib861c95ba630fed62dc54e56784ad8446ed9d2db

2017-07-17 11:01 +0000 [680c491a62]  Joshua Colp <jcolp@digium.com>

	* bridge_softmix / res_rtp_asterisk: Fix packet loss and renegotiation issues.

	  This change does a few things to improve packet loss and renegotiation:

	  1. On outgoing RTP streams we will now properly reflect out of order
	  packets and packet loss in the sequence number. This allows the
	  remote jitterbuffer to better reorder things.

	  2. Video updates can now be discarded for a period of time
	  after one has been sent to prevent flooding of clients.

	  3. For declined and removed streams we will now release any
	  media session resources associated with them. This was not
	  previously done and caused an issue where old state was being
	  used for a new stream.

	  4. RTP bundling was not actually removing bundled RTP instances
	  from the parent. This has been resolved by removing based on
	  the RTP instance itself and not the SSRC.

	  5. The code did not properly handle explicitly unbundling an
	  RTP instance from its parent. This now works as expected.

	  ASTERISK-27143

	  Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45

2017-05-19 23:28 +0000 [d2fbbdd692]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Create declined m= SDP lines using remote SDP if applicable.

	  * Update SDP unit tests to test negotiating with declined streams.
	  Generation of declined m= lines created and responded tested.

	  Change-Id: I5cb99f5010994ab0c7d9cf2d395eca23fab37b98

2017-05-02 18:51 +0000 [3a18a09030]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Rework SDP offer/answer model and update capabilities merges.

	  The SDP offer/answer model requires an answer to an offer before a new SDP
	  can be processed.  This allows our local SDP creation to be deferred until
	  we know that we need to create an offer or an answer SDP.  Once the local
	  SDP is created it won't change until the SDP negotiation is restarted.

	  An offer SDP in an initial SIP INVITE can receive more than one answer
	  SDP.  In this case, we need to merge each answer SDP with our original
	  offer capabilities to get the currently negotiated capabilities.  To
	  satisfy this requirement means that we cannot update our proposed
	  capabilities until the negotiations are restarted.

	  Local topology updates from ast_sdp_state_update_local_topology() are
	  merged together until the next offer SDP is created.  These accumulated
	  updates are then merged with the current negotiated capabilities to create
	  the new proposed capabilities that the offer SDP is built.

	  Local topology updates are merged in several passes to attempt to be smart
	  about how streams from the system are matched with the previously
	  negotiated stream slots.  To allow for T.38 support when merging, type
	  matching considers audio and image types to be equivalent.  First streams
	  are matched by stream name and type.  Then streams are matched by stream
	  type only.  Any remaining unmatched existing streams are declined.  Any
	  new active streams are either backfilled into pre-merge declined slots or
	  appended onto the end of the merged topology.  Any excess new streams
	  above the maximum supported number of streams are simply discarded.

	  Remote topology negotiation merges depend if the topology is an offer or
	  answer.  An offer remote topology negotiation dictates the stream slot
	  ordering and new streams can be added.  A remote offer can do anything to
	  the previously negotiated streams except reduce the number of stream
	  slots.  An answer remote topology negotiation is limited to what our offer
	  requested.  The answer can only decline streams, pick codecs from the
	  offered list, or indicate the remote's stream hold state.

	  I had originally kept the RTP instance if the remote offer SDP changed a
	  stream type between audio and video since they both use RTP.  However, I
	  later removed this support in favor of simply creating a new RTP instance
	  since the stream's purpose has to be changing anyway.  Any RTP packets
	  from the old stream type might cause mischief for the bridged peer.

	  * Added ast_sdp_state_restart_negotiations() to restart the SDP
	  offer/answer negotiations.  We will thus know to create a new local SDP
	  when it is time to create an offer or answer.

	  * Removed ast_sdp_state_reset().  Save the current topology before
	  starting T.38.  To recover from T.38 simply update the local topology to
	  the saved topology and restart the SDP negotiations to get the offer SDP
	  renegotiating the previous configuration.

	  * Allow initial topology for ast_sdp_state_alloc() to be NULL so an
	  initial remote offer SDP can dictate the streams we start with.  We can
	  always update the local topology later if it turns out we need to offer
	  SDP first because the remote chose to defer sending us a SDP.

	  * Made the ast_sdp_state_alloc() initial topology limit to max_streams,
	  limit to configured codecs, handle declined streams, and discard
	  unsupported types.

	  * Convert struct ast_sdp to ao2 object.  Needed to easily save off a
	  remote SDP to refer to later for various reasons such as generating
	  declined m= lines in the local SDP.

	  * Improve converting remote SDP streams to a topology including stream
	  state.  A stream state of AST_STREAM_STATE_REMOVED indicates the stream is
	  declined/dead.

	  * Improve merging streams to take into account the stream state.

	  * Added query for remote hold state.

	  * Added maximum streams allowed SDP config option.

	  * Added ability to create new streams as needed.  New streams are created
	  with configured default audio, video, or image codecs depending on stream
	  type.

	  * Added global locally_held state along with a per stream local hold
	  state.  Historically, Asterisk only has a global locally held state
	  because when the we put the remote on hold we do it for all active
	  streams.

	  * Added queries for a rejected offer and current SDP negotiation role.
	  The rejected query allows the using module to know how to respond to a
	  failed remote SDP set.  Should the using module respond with a 488 Not
	  Acceptable Here or 500 Internal Error to the offer SDP?

	  * Moved sdp_state_capabilities.connection_address to ast_sdp_state.  There
	  seems no reason to keep it in the sdp_state_capabilities struct since it
	  was only used by the ast_sdp_state.proposed_capabilities instance.

	  * Callbacks are now available to allow the using module some customization
	  of negotiated streams and to complete setting up streams for use.  See the
	  typedef doxygen for each callback for what is allowable and when they are
	  called.
	      * Added topology answerer modify callback.
	      * Added topology pre and post apply callbacks.
	      * Added topology offerer modify callback.
	      * Added topology offerer configure callback.

	  * Had to rework the unit tests because I changed how SDP topologies are
	  merged.  Replaced several unit tests with new negotiation tests.

	  Change-Id: If07fe6d79fbdce33968a9401d41d908385043a06

2017-06-18 19:24 +0000 [70d2ccb9da]  Corey Farrell <git@cfware.com>

	* Core: Add support for systemd socket activation.

	  This change adds support for socket activation of certain SOCK_STREAM
	  listeners in Asterisk:
	  * AMI / AMI over TLS
	  * CLI
	  * HTTP / HTTPS

	  Example systemd units are provided.  This support extends to any socket
	  which is initialized using ast_tcptls_server_start, so any unknown
	  modules using this function will support socket activation.

	  Asterisk continues to function as normal if socket activation is not
	  enabled or if systemd development headers are not available during
	  build.

	  ASTERISK-27063 #close

	  Change-Id: Id814ee6a892f4b80d018365c8ad8d89063474f4d

2017-09-01 19:29 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 15.0.0-rc1 Released.

2017-07-24 10:48 +0000 [35c8fb1590]  George Joseph <gjoseph@digium.com>

	* pjsip_message_ip_updater:  Fix issue handling "tel" URIs

	  sanitize_tdata was assuming all URIs were SIP URIs so when a non
	  SIP uri was in the From, To or Contact headers, the unconditional
	  cast of a non-pjsip_sip_uri structure to pjsip_sip_uri caused
	  a segfault when trying to access uri->other_param.

	  * Added PJSIP_URI_SCHEME_IS_SIP(uri) || PJSIP_URI_SCHEME_IS_SIPS(uri)
	    checks before attempting to cast or use the returned uri.

	  ASTERISK-27152
	  Reported-by: Ross Beer

	  Change-Id: Id380df790e6622c8058a96035f8b8f4aa0b8551f

2017-07-01 19:24 +0000 [231ee5e6c6]  Corey Farrell <git@cfware.com>

	* AST-2017-006: Fix app_minivm application MinivmNotify command injection

	  An admin can configure app_minivm with an externnotify program to be run
	  when a voicemail is received.  The app_minivm application MinivmNotify
	  uses ast_safe_system() for this purpose which is vulnerable to command
	  injection since the Caller-ID name and number values given to externnotify
	  can come from an external untrusted source.

	  * Add ast_safe_execvp() function.  This gives modules the ability to run
	  external commands with greater safety compared to ast_safe_system().
	  Specifically when some parameters are filled by untrusted sources the new
	  function does not allow malicious input to break argument encoding.  This
	  may be of particular concern where CALLERID(name) or CALLERID(num) may be
	  used as a parameter to a script run by ast_safe_system() which could
	  potentially allow arbitrary command execution.

	  * Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
	  instead of ast_safe_system() to avoid command injection.

	  * Document code injection potential from untrusted data sources for other
	  shell commands that are under user control.

	  ASTERISK-27103

	  Change-Id: I7552472247a84cde24e1358aaf64af160107aef1

2017-05-22 10:36 +0000 [ba2c8f1458]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Only learn a new source in learn state.

	  This change moves the logic which learns a new source address
	  for RTP so it only occurs in the learning state. The learning
	  state is entered on initial allocation of RTP or if we are
	  told that the remote address for the media has changed. While
	  in the learning state if we continue to receive media from
	  the original source we restart the learning process. It is
	  only once we receive a sufficient number of RTP packets from
	  the new source that we will switch to it. Once this is done
	  the closed state is entered where all packets that do not
	  originate from the expected source are dropped.

	  The learning process has also been improved to take into
	  account the time between received packets so a flood of them
	  while in the learning state does not cause media to be switched.

	  Finally RTCP now drops packets which are not for the learned
	  SSRC if strict RTP is enabled.

	  ASTERISK-27013

	  Change-Id: I56a96e993700906355e79bc880ad9d4ad3ab129c

2017-08-30 07:28 +0000 [663fe3e31f]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Allow remote SSRC to change on an RTP instance.

	  When SDP renegotiation occurs it is possible for an RTP
	  instance to be reused for a new stream, resulting in the remote
	  SSRC changing if it is part of a bundle group. This change
	  allows this and updates its mapping in the current bundle
	  group.

	  ASTERISK-27231

	  Change-Id: I6e3703974f236bc024c5dbe9bd43adae0c6fb490

2017-08-24 11:45 +0000 [dab0389e24]  Joshua Colp <jcolp@digium.com>

	* core: Reduce video update queueing.

	  A video update frame is used to indicate that a channel
	  with video negotiated should provide a full frame so the
	  decoder decoding the stream is able to do so. In situations
	  where a queue is used to store frames it makes no sense
	  for the queue to contain multiple video update frames. One
	  is sufficient to have a full frame be sent.

	  ASTERISK-27222

	  Change-Id: Id3f40a6f51b740ae4704003a1800185c0c658ee7

2017-08-14 12:20 +0000 [0a0ef8a1b1]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip.c: Fix topology refresh response code accuracy.

	  There are other 1xx and 2xx codes than 100 and 200 respectively.

	  Change-Id: I680db0997343256add1478714f5bf5b5569aee17

2017-08-18 17:37 +0000 [00b10fa1e1]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Fix crash when declining an active stream.

	  If a previously active stream is declined we could crash because the
	  channel's thread is still using the stream while we are updating the
	  topology in the serializer thread.

	  * Defer removing any declined stream's handler until we have blocked the
	  channel's thread with the channel lock.

	  ASTERISK-27212

	  Change-Id: I50e1d3ef26f8e41948f4c411ee329aa3b960a420

2017-08-16 17:50 +0000 [6acc945533]  Richard Mudgett <rmudgett@digium.com>

	* bridge_channel.c: Fix FRACK when mapping frames to the bridge.

	  * Add protection checks when mapping streams to the bridge.  The channel
	  and bridge may be in the process of updating the stream mapping when a
	  media frame comes in so we may not be able to map the frame at the time.

	  * We need to map the streams to the bridge's stream numbers right before
	  they are written into the bridge.  That way we don't have to keep
	  locking/unlocking the bridge and we won't have any synchronization
	  problems before the frames actually go into the bridge.

	  * Protect the deferred queue with the bridge_channel lock.

	  ASTERISK-27212

	  Change-Id: Id6860dd61b594b90c8395f6e2c0150219094c21a

2017-08-11 16:31 +0000 [efbf0aa8df]  Richard Mudgett <rmudgett@digium.com>

	* channel: Fix topology API locking.

	  * ast_channel_request_stream_topology_change() must not be called with any
	  channel locks held.

	  * ast_channel_stream_topology_changed() must be called with only the
	  passed channel lock held.

	  ASTERISK-27212

	  Change-Id: I843de7956d9f1cc7cc02025aea3463d8fe19c691

2017-08-16 15:22 +0000 [6bad253669]  Richard Mudgett <rmudgett@digium.com>

	* bridge: Fix softmix bridge deadlock.

	  * Fix deadlock in
	  bridge_softmix.c:softmix_bridge_stream_topology_changed() between
	  bridge_channel and channel locks.

	  * The new bridge technology topology change callbacks must be called with
	  the bridge locked.  The callback references the bridge channel list, the
	  bridge technology could change, and the bridge stream mapping is updated.

	  ASTERISK-27212

	  Change-Id: Ide4360ab853607e738ad471721af3f561ddd83be

2017-08-17 17:07 +0000 [40faa22ce8]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Document sfu video_mode value.

	  Change-Id: I26e17df2c93f3933b23f78070603adbcc84ba204

2017-08-16 15:43 +0000 [e52f9b041a]  George Joseph <gjoseph@digium.com>

	* Fix downloader not working with curl

	  The codec/dpma downloader wasn't handling curl correctly.  The logic
	  that transforms makeopts into a bash-sourceable file wasn't
	  handling the make 'or' command in DOWNLOAD_TIMEOUT so bash was
	  looking for an 'or' command.

	  That logic has been eliminated.  Instead of trying to transform
	  and source makeopts, the downloader now calls a make scriptlet
	  to print the value of a specific variable.  This way, make handles
	  the ors (or any other make construct that happens to creep into
	  that file).

	  ASTERISK-27202
	  Reported by: Sean McCord

	  Change-Id: Iadfb6693528e4d4da7b8bb201fa66da2c71c7f99

2017-08-15 13:12 +0000 [d7b04f22de]  Kevin Harwell <kharwell@digium.com>

	* manager: hook event is not being raised

	  When the iostream code went in it introduced a conditional that made it so the
	  hook event was not being raised even if a hook is present. This patch adds a
	  check to see if a hook is present in astman_append. If so then call into the
	  send_string function, which in turn raises the even for specified hook.

	  Also updated the ami hooks unit test, so the test could be automated.

	  ASTERISK-27200 #close

	  Change-Id: Iff37f02f9708195d8f23e68f959d6eab720e1e36

2017-08-15 15:15 +0000 [44d316ef4a]  Richard Mudgett <rmudgett@digium.com>

	* configure: Check cache for valid pjproject tarball before downloading.

	  On a fresh Asterisk source directory, the bundled pjproject tarball is
	  unconditionally downloaded even if the tarball is already in a specified
	  cache directory.

	  * Made check if the pjproject tarball is valid in the cache directory
	  before downloading the tarball on a fresh source directory.

	  Change-Id: Ic7ec842d3c97ecd8dafbad6f056b7fdbce41cae5

2017-08-09 15:24 +0000 [012391920c]  Richard Mudgett <rmudgett@digium.com>

	* UPGRADE notes: Fixup for the 15 branch

	  Change-Id: I4ca2f07ed62d77f1fdd10c3b216f6a28dd75720c

2017-08-04 16:47 +0000 [4d3e66eabc]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_session/_sdp_rtp: Handling of 'msid' is incorrect

	  Currently, the handling of the msid attribute is not quite right. According to
	  the spec the msid's between the offer/answer are not dependent upon one another.
	  Meaning the same msid's given in an offer do not have to be returned in the
	  answer for a given stream. And they probably shouldn't be (copied/reused) since
	  this can potentially cause some browser side confusion.

	  This patch generates new msids when both an offer and answer are sent from
	  Asterisk. However, Asterisk does reuse the original msid it sent out for a
	  reinvite. Also audio+video streams are paired together by sharing the same
	  stream id, but a different track id.

	  ASTERISK-27179 #close

	  Change-Id: Ifaec06dc7e65ad841633a24ebec8c8a9302d6643

2017-08-06 11:15 +0000 [71d0424ed5]  Joshua Colp <jcolp@digium.com>

	* bridge: Fix stream topology/participant locking and video misrouting.

	  This change fixes a few locking issues and some video misrouting.

	  1. When accessing the stream topology of a channel the channel lock
	  must be held to guarantee the topology remains valid.

	  2. When a channel was joined to a bridge the bridge specific
	  implementation for stream mapping was not invoked, causing video
	  to be misrouted for a brief period of time.

	  ASTERISK-27182

	  Change-Id: I5d2f779248b84d41c5bb3896bf22ba324b336b03
	  (cherry picked from commit 0e352ec5100331c6a32008acc88d69d0fc58ccdd)

2017-08-08 13:33 +0000 [84600e2682]  George Joseph <gjoseph@digium.com>

	* Make --with-pjproject-bundled the default for Asterisk 15

	  '--with-pjproject-bundled' is now the default when running
	  ./configure. It can be disabled with '--without-pjproject-bundled'.

	  To make building without an internet connection easier, a new
	  ./configure option '--with-download-cache' was added that sets
	  the cache for externals (like pjproject, the codecs and the DPMA),
	  AND the sounds files.  It can also be specified as an environment
	  variable named "AST_DOWNLOAD_CACHE".  The existing
	  '--with-sounds-cache' option / SOUNDS_CACHE_DIR env variable and
	  '--with-externals-cache' option / EXTERNALS_CACHE_DIR env variable
	  remain and if specified, will override '--with-downloads-cache'.

	  ASTERISK-27189

	  Change-Id: Ifa9783fddf44aafadb060c9feba713dfa81d38ce

2017-08-05 14:43 +0000 [afd7875e82]  Corey Farrell <git@cfware.com>

	* channel: Fix leak on successful call to chan->tech->requester.

	  joint_cap needs to be released unconditionally as chan->tech->requester
	  does not steal the reference even on success.

	  ASTERISK-27180 #close

	  Change-Id: I647728992559bdb0a9c7357c20be1b36400d68b6
	  (cherry picked from commit 3dbb1b9f48b0fa23cec2d8e3f94173004da320a4)

2017-08-02 14:16 +0000 [53bba12340]  Corey Farrell <git@cfware.com>

	* Fix compile error for old versions of GCC.

	  Use -Wno-format-truncation only if supported by compiler.

	  ASTERISK-27171 #close

	  Change-Id: Iac0aed7a5bcaa16c21b7d62c4e4678d244c4ccb6
	  (cherry picked from commit cd79a15b2f9411c6e77f0f6594ff0c46f0ece080)

2017-08-02 09:43 +0000 [c042ad8343]  Kevin Harwell <kharwell@digium.com>

	* alembic/res_pjsip: Add "webrtc" configuration option

	  When the "webrtc" option was added in res_pjsip it was not added to the alembic
	  scripts. This patch adds the option for alembic.

	  Also, changed the sorcery configuration type to an OPT_YESNO_T value instead of
	  an OPT_BOOL_T so if this field is ever written to a database it will write out
	  the correct value.

	  ASTERISK-27119 #close

	  Change-Id: I3e199f060aea25e193c439fc5cf96be4d3ed1c7b
	  (cherry picked from commit b0c016cf6e0bcbe743f4f8286fb9b5ded830ccf7)

2017-08-02 11:44 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 15.0.0-beta1 Released.

2017-07-27 20:58 +0000 [aba08692df]  Corey Farrell <git@cfware.com>

	* Fix compiler warnings on Fedora 26 / GCC 7.

	  GCC 7 has added capability to produce warnings, this fixes most of those
	  warnings.  The specific warnings are disabled in a few places:

	  * app_voicemail.c: truncation of paths more than 4096 chars in many places.
	  * chan_mgcp.c: callid truncated to 80 chars.
	  * cdr.c: two userfields are combined to cdr copy, fix would break ABI.
	  * tcptls.c: ignore use of deprecated method SSLv3_client_method().

	  ASTERISK-27156 #close

	  Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88

2017-07-27 06:35 +0000 [64edb4ed21]  George Joseph <gjoseph@digium.com>

	* bundled_pjproject:  Improve SSL/TLS error handling

	  OpenSSL has 2 levels or error processing.  It's possible for the
	  top layer to return SSL_ERROR_SYSCALL but the lower layer return
	  no error, in which case processing should continue.  Only the top
	  layer was being examined though so connections were being torn
	  down when they didn't need to be.  This patch adds the examination
	  of the lower level codes, and if they return no errors, allows
	  processing to continue.

	  ASTERISK-27001
	  Reported-by: Ian Gilmore
	  Patch-by: Ian Gilmore (pjproject-2.6.patch License 6889)
	      Updated-by: George Joseph and Sauw Ming (Teluu)

	  Merged to upstream pjproject on 7/27/2017 (commit 5631)

	  Change-Id: I23844ca0c68ef1ee550f14d46f6dae57d33b7bd2

2017-07-25 15:17 +0000 [d056f6b2fe]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk: Fix mapping of pjsip's ICE roles to ours

	  Change-Id: Ia578ede1a55b21014581793992a429441903278b

2017-07-26 08:48 +0000 [11cd3be506]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_pidf_eyebeam_body_supplement: Correct status presentation

	  This change fixes PIDF content generation when the underlying device
	  state is considered in use. Previously it was incorrectly marked
	  as closed meaning they were offline/unavailable. The code now
	  correctly marks them as open.

	  Additionally:

	    * Generate an XML element for our activity instead of a using a text
	      node.

	    * Consider every extension state other than "unavailable" to be 'open'
	      status.

	    * Update the XML namespaces and structure to reflect those
	      documented in RFC 4480

	    * Use 'on-the-phone' (defined in RFC 4880) instead of 'busy' as the
	      "in use" activity. This change results in eyeBeam using the
	      appropriate icon for the watched user.

	  This was tested on eyeBeam 1.5.20.2 build 59030 on Windows.

	  ASTERISK-26659 #close
	  Reported by: Abraham Liebsch
	  patches:
	    ASTERISK-26659.diff submitted by snuffy (license 5024)

	  Change-Id: I6e5ad450f91106029fb30517b8c0ea0c2058c810

2017-07-26 09:27 +0000 [76270c0f78]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Add announce-position-only-up option

	  Setting this option will cause the Queue application to only announce
	  the caller's position if it has improved since the last time that we
	  announced it.

	  Change-Id: I173a124121422209485b043e2bf784f54242fce6

2017-06-26 07:52 +0000 [154e74eced]  Torrey Searle <torrey@voxbone.com>

	* chan_pjsip: add a new function PJSIP_DTMF_MODE

	  This function is a replica of SIPDtmfMode, allowing the DTMF mode of a
	  PJSIP call to be modified on a per-call basis

	  ASTERISK-27085 #close

	  Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612

2017-07-17 11:01 +0000 [451d86d62e]  Joshua Colp <jcolp@digium.com>

	* bridge_softmix / res_rtp_asterisk: Fix packet loss and renegotiation issues.

	  This change does a few things to improve packet loss and renegotiation:

	  1. On outgoing RTP streams we will now properly reflect out of order
	  packets and packet loss in the sequence number. This allows the
	  remote jitterbuffer to better reorder things.

	  2. Video updates can now be discarded for a period of time
	  after one has been sent to prevent flooding of clients.

	  3. For declined and removed streams we will now release any
	  media session resources associated with them. This was not
	  previously done and caused an issue where old state was being
	  used for a new stream.

	  4. RTP bundling was not actually removing bundled RTP instances
	  from the parent. This has been resolved by removing based on
	  the RTP instance itself and not the SSRC.

	  5. The code did not properly handle explicitly unbundling an
	  RTP instance from its parent. This now works as expected.

	  ASTERISK-27143

	  Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45

2017-07-20 08:08 +0000 [2128dc7c87]  Sergej Kasumovic <sergej@bicomsystems.com>

	* res_stasis_device_state: Unsubscribe should remove old subscriptions

	  Case scenario with Applications ARI:

	  * Once you subscribe to deviceState with Applications REST API, it will be
	  added into subscription pool.

	  * When you unsubscribe it will remove from the device_state_subscription
	  hash table but not from the subscription pool.

	  * When you subscribe again, it will add it to pool again.

	  * Now you will have two subscriptions and you will receive same event
	  twice.

	  This fix should now remove deviceState subscription from pool and it
	  should fix unsubscribe on deviceState.

	  ASTERISK-27130 #close

	  Change-Id: I718b70d770a086e39b4ddba4f69a3c616d4476c4

2017-07-24 13:30 +0000 [927fc6bbd9]  Joshua Colp <jcolp@digium.com>

	* core: Add VP9 passthrough support.

	  This change adds VP9 as a known codec and creates a cached
	  "vp9" media format for use.

	  Change-Id: I025a93ed05cf96153d66f36db1839109cc24c5cc

2017-07-21 15:57 +0000 [9aa4942a49]  Matthew Fredrickson <creslin@digium.com>

	* format.h: Fix a few minor errors in comments.

	  A few minor problems were found in comments in format.h.  This patch fixes them.

	  Change-Id: I07f0bdb47b93359b361c4c3d8ecc87cd3199dd94

2017-07-23 18:34 +0000 [0219d25e4e]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add support for dnsmgr to external_media_address.

	  The "external_media_address" option on transports is now
	  resolved using dnsmgr. This allows it to be automatically
	  refreshed regularly if refreshes are enabled in dnsmgr.
	  If the system is using a dynamic IP address a dynamic DNS
	  hostname can be provided to keep the IP address up to
	  date.

	  Change-Id: Ia54771720dff0105bde55d5bbb81a3ba437e05b2

2017-07-19 18:11 +0000 [85c631294a]  Richard Mudgett <rmudgett@digium.com>

	* app_voicemail.c: Allow mailbox entry on authentication retry prompt.

	  The following testsuite voicemail tests were failing to re-enter the
	  mailbox after the first login attempt.

	  tests/apps/voicemail/authenticate_invalid_mailbox
	  tests/apps/voicemail/authenticate_invalid_password

	  The tests were noting the start of the vm-incorrect-mailbox prompt and
	  immediately sending the mailbox for the next login attempt.  Since the
	  invalid message playback had to complete before the digits were
	  recognized, the test passed for the wrong reason and added approximately
	  20 seconds to the test times.

	  * Allow the vm-incorrect-mailbox prompt to get interrupted by the mailbox
	  digits like the initial vm-login prompt so the tests are able to enter the
	  intended mailbox.

	  Change-Id: I1dc53fe917bfe03a4587b2c4cd24c94696a69df8

2017-07-21 14:20 +0000 [e0ad75ec2a]  Rusty Newton <rnewton@digium.com>

	* Sounds: Update Makefile for Extra sounds 1.5.1 release

	  Incrementing version for the Extra sounds release. 1.5.1 Extra sounds
	  removes two prompts that were moved into the Core packages in the 1.6 Core
	  sounds release.

	  ASTERISK-27142 #close

	  Change-Id: I82f017812b0ea9599e19dd4635afd55611f13ee7

2017-07-14 13:47 +0000 [715d79b60d]  Rusty Newton <rnewton@digium.com>

	* say.c: Fix file locations for second, seconds, minute, minutes files

	  The seconds and minutes files have always existed in the base language
	  directory of the Core package. So say.c has always been calling the wrong
	  location (under digits/) for those two files and in the case of second and
	  minute they didn't exist in the Core packages at all.

	  The 1.6 sounds release moves the second and minute files into Core from
	  Extra for the languages that already had them. A future release will include
	  the second and minute files for languages that didn't already have them.

	  This patch just changes all the target locations for second, seconds,
	  minute, and minutes that were under the digits subdir to be under the root of
	  sounds instead. Which is where the sounds will be for some languages after 1.6
	  sounds and for all languages after a future release.

	  ASTERISK-25810 #close

	  Change-Id: I05d9d4bee6a7237030530a46e7eb3df15f13f702
	  Reported-by: Nicolas Riendeau

2017-06-18 19:24 +0000 [eea9da2f42]  Corey Farrell <git@cfware.com>

	* Core: Add support for systemd socket activation.

	  This change adds support for socket activation of certain SOCK_STREAM
	  listeners in Asterisk:
	  * AMI / AMI over TLS
	  * CLI
	  * HTTP / HTTPS

	  Example systemd units are provided.  This support extends to any socket
	  which is initialized using ast_tcptls_server_start, so any unknown
	  modules using this function will support socket activation.

	  Asterisk continues to function as normal if socket activation is not
	  enabled or if systemd development headers are not available during
	  build.

	  ASTERISK-27063 #close

	  Change-Id: Id814ee6a892f4b80d018365c8ad8d89063474f4d

2017-07-21 11:24 +0000 [94de9d3eea]  George Joseph <gjoseph@digium.com>

	* Restore the incorrectly deleted spandspflow2pcap.log

	  Change-Id: Iafe78cf0fb1e7064223d4dea279eeb776c8fa8e5

2017-07-21 07:56 +0000 [6239203628]  George Joseph <gjoseph@digium.com>

	* Update make_ari_stubs to correct version

	  Change-Id: I18575b46db48d62edc72f37dc23b4ab22b43a8b1

2017-07-20 09:57 +0000 [6650ae43e1]  Sean Bright <sean.bright@gmail.com>

	* corosync: Fix corosync library name in configure.ac

	  Also add new corosync packages to install_prereq.

	  Reported by Travis Ryan in #asterisk-dev

	  Change-Id: Ib861c95ba630fed62dc54e56784ad8446ed9d2db

2017-07-20 13:06 +0000 [b172474728]  George Joseph <gjoseph@digium.com>

	* Update MAINLINE_BRANCH to 15

	  Change-Id: I425d542b600ceabeef2342e9adfeb68c484a043d

2017-07-20 10:52 +0000 [3e8d628c0e]  George Joseph <gjoseph@digium.com>

	* Update AMI and ARI versions for master/15 and update UPDATE.txt

	  AMI goes from 3.2.0 to 4.0.0
	  ARI goes from 2.0.0 to 3.0.0

	  Copied UPGRADE.txt -> UPGRADE-15.txt
	  Created new UPGRADE.txt
	  Removed a log file that was accidentally checked in a while ago

	  Change-Id: I1c794f910038459b13e16f9c3a12c44e56f142f7

2017-07-18 15:04 +0000 [e7d9e42616]  Benjamin Keith Ford <bford@digium.com>

	* pjsip: Increase maximum packet size.

	  The maximum packet size for PJSIP has been increased to handle the
	  multiple streams being added for WebRTC.

	  Change-Id: I9ea1e8d02668c544acadcb1c6200e1cc1bd588b3

2017-07-17 07:19 +0000 [bcd3f65174]  Joshua Colp <jcolp@digium.com>

	* bridge_softmix: Don't reorder streams on participant leaving.

	  When a participant leaves a bridge while operating in SFU mode
	  their respective stream on every other participant needs to be
	  removed. Leaving the stream out of the new topology results in
	  every stream after it being moved and reordered. This causes
	  problems with clients. Instead simply mark the stream as removed
	  which leaves it in place in the SDP and doesn't reorder or touch
	  any other streams.

	  ASTERISK-27136

	  Change-Id: I4b3f840adcdf69b83842b0d8a737665ba0ef9cb1

2017-07-16 12:31 +0000 [f48695ce5b]  Joshua Colp <jcolp@digium.com>

	* bridge_softmix: Use removed stream spots when renegotiating.

	  Streams are never truly removed in SDP, they still occupy
	  a location within the SDP. This location can be reused by
	  another stream if it so chooses.

	  This change takes advantage of this such that if a new stream
	  is needing to be added for a new participant any removed streams
	  are instead replaced first. This reduces the size of the SDP
	  and the number of streams.

	  ASTERISK-27134

	  Change-Id: I95cdcfd55cf47e02ea52abb5d94008db3fb68b1d

2017-07-16 12:18 +0000 [942ee54b53]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Use RTP component for ICE if RTCP-MUX is in use.

	  This change makes it so that if an RTCP packet is being sent
	  the RTP ICE component is used for sending if RTCP-MUX is in use.

	  ASTERISK-27133

	  Change-Id: I6200f611ede709602ee9b89501720c29545ed68b

2017-07-14 01:25 +0000 [26f149ab0a]  Sergej Kasumovic <sergej@bicomsystems.com>

	* app_confbridge: Make sure name recordings are always removed from the filesystem

	  This commit fixes two possible scenarios:

	  * When recording name and if during recording you hangup, file is never
	  removed. This is due to the fact file location is nulled.
	  * When recording name and if you hangup during thank-you prompt, file
	  is never removed.

	  ASTERISK-27123 #close

	  Change-Id: I39b7271408b4b54ce880c5111a886aa8f28c2625

2017-07-14 01:11 +0000 [d3f5b265c7]  Sergej Kasumovic <sergej@bicomsystems.com>

	* chan_iax2: On reload make sure to check for existing MWI subscription

	  On every reload of chan_iax2 module, MWI subscription was added, which
	  results in additional taskprocessors being accumulated over time.

	  This commit fixes it by making sure we check for existing subscription
	  first.

	  This was verified with 'core show taskprocessors' CLI command.

	  ASTERISK-27122 #close

	  Change-Id: Ie2ef528fd5ca01b933eeb88188cc10967899cfb9

2017-07-10 18:17 +0000 [7da6ddda30]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: Add "webrtc" configuration option

	  This patch creates a new configuration option called "webrtc". When enabled it
	  defaults and enables the following options that are needed in order for webrtc
	  to work in Asterisk:

	    rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
	    media_encryption=dtls
	    dtls_verify=fingerprint
	    dtls_setup=actpass

	  When "webrtc" is enabled, this patch also parses the "msid" media level
	  attribute from an SDP. It will also appropriately add it onto the outgoing
	  session when applicable.

	  Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.

	  ASTERISK-27119 #close

	  Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd

2017-07-13 15:43 +0000 [3fbb4a0a08]  Rusty Newton <rnewton@digium.com>

	* Sounds: Update for core sounds 1.6 release

	  Added necessary lines to make the en_NZ language set selectable and to get
	  core sounds 1.6 pulled down.

	  ASTERISK-26807 #close
	  ASTERISK-25816 #close
	  ASTERISK-26274 #close

	  Change-Id: I84e4dd4696568cc1ba318d12ac4b075461d6eed4

2017-07-10 14:04 +0000 [78a50b0343]  Corey Farrell <git@cfware.com>

	* core: Add PARSE_TIMELEN support to ast_parse_arg and ACO.

	  This adds support for parsing timelen values from config files.  This
	  includes support for all flags which apply to PARSE_INT32.  Support for
	  this parser is added to ACO via the OPT_TIMELEN_T option type.

	  Fixes an issue where extra characters provided to ast_app_parse_timelen
	  were ignored, they now cause an error.

	  Testing is included.

	  ASTERISK-27117 #close

	  Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554

2017-06-30 13:55 +0000 [065c3005ad]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk / res_pjsip: Add support for BUNDLE.

	  BUNDLE is a specification used in WebRTC to allow multiple
	  streams to use the same underlying transport. This reduces
	  the number of ICE and DTLS negotiations that has to occur
	  to 1 normally.

	  This change implements this by adding support for it to
	  the RTP SDP module in PJSIP. BUNDLE can be turned on using
	  the "bundle" option and on an offer we will offer to
	  bundle streams together. On an answer we will accept any
	  bundle groups provided. Once accepted each stream is bundled
	  to another RTP instance for transport.

	  For the res_rtp_asterisk changes the ability to bundle
	  an RTP instance to another based on the SSRC received
	  from the remote side has been added. For outgoing traffic
	  if an RTP instance is bundled to another we will use the
	  other RTP instance for any transport related things. For
	  incoming traffic received from the transport instance we
	  look up the correct instance based on the SSRC and use it
	  for any non-transport related data.

	  ASTERISK-27118

	  Change-Id: I96c0920b9f9aca7382256484765a239017973c11

2017-07-11 09:55 +0000 [8b535a406b]  Torrey Searle <torrey@voxbone.com>

	* res/res_stasis_snoop: generate silence when audiohook returns null

	  Currently when rtp is paused, no packets are written to the
	  recorded audio file, causing the silence to be skipped and recording
	  not properly time aligned.  The read handler as been adapted to
	  return a silence frame of the correct size.

	  ASTERISK-27128 #close

	  Change-Id: I2d7f60650457860b9c70907b14426756b058a844

2017-06-22 07:47 +0000 [d42a9cc9dc]  Torrey Searle <torrey@voxbone.com>

	* res/res_pjsip_t38  ensure t38 requests get rejected quickly

	  arm the t38 webhook always, so we can correctly reject a
	  T38 negotiation request when t38 is disabled on a channel

	  Change-Id: Ib1ffe35aee145d4e0fe61dd012580be11aae079d

2017-07-12 13:24 +0000 [6b138046e7]  Corey Farrell <git@cfware.com>

	* core: Add digit filtering to ast_waitfordigit_full

	  This adds a parameter to ast_waitfordigit_full which can be used to only
	  stop waiting when certain expected digits are received.  Any unexpected
	  DTMF digits are simply ignored.

	  This also creates a new dialplan application WaitDigit.

	  ASTERISK-27129 #close

	  Change-Id: Id233935ea3d13e71c75a0861834c5936c3700ef9

2017-07-11 04:48 +0000 [b54eb167b4]  Holger Hans Peter Freyther <holger@moiji-mobile.com>

	* app_playback.c: Use the timezonename parameter

	  In say_date_generic the timezonename parameter is passed but never
	  used. Fix it by passing it to the ast_localtime function.

	  ASTERISK-27124

	  Change-Id: I63106b8db10426d417d7275f22554a616e92fae4

2017-07-12 15:07 +0000 [e83b9d141a]  Sean Bright <sean.bright@gmail.com>

	* basic-pbx: Remove res_pjsip_multihomed from sample config

	  ASTERISK-27127 #close
	  Reported by: HZMI8gkCvPpom0tM

	  Change-Id: I2b0c54570d58156e37166ac536728af3b6c01789

2017-07-11 14:33 +0000 [7f09fd2c2f]  Joshua Colp <jcolp@digium.com>

	* bridge/core_unreal: Fix SFU bugs with forwarding frames.

	  This change fixes a few things uncovered during SFU testing.

	  1. Unreal channels incorrectly forwarded video frames when
	  no video stream was present on them. This caused a crash when
	  they were read as the core requires a stream to exist for the
	  underlying media type. The Unreal channel will now ensure a
	  stream exists for the media type before forwarding the frame
	  and if no stream exists then the frame is dropped.

	  2. Mapping of frames during bridging from the stream number of
	  the underlying channel to the stream number of the bridge was
	  done in the wrong location. This resulted in the frame getting
	  dropped. This mapping now occurs on reading of the frame from
	  the channel.

	  3. Bridging was using the wrong ast_read function resulting in
	  it living in a non-multistream world.

	  4. In bridge_softmix when adding new streams to existing channels
	  the wrong stream topology was copied resulting in no streams
	  being added.

	  Change-Id: Ib7445722c3219951d6740802a0feddf2908c18c8

2017-07-11 07:26 +0000 [b7a875778a]  George Joseph <gjoseph@digium.com>

	* res_musiconhold:  Add kill_escalation_delay, kill_method to class

	  By default, when res_musiconhold reloads or unloads, it sends a HUP
	  signal to custom applications (and all descendants), waits 100ms,
	  then sends a TERM signal, waits 100ms, then finally sends a KILL
	  signal.  An application which is interacting with an external
	  device and/or spawns children of its own may not be able to exit
	  cleanly in the default times, expecially if sent a KILL signal, or
	  if it's children are getting signals directly from
	  res_musiconhoild.

	  * To allow extra time, the 'kill_escalation_delay'
	    class option can be used to set the number of milliseconds
	    res_musiconhold waits before escalating kill signals, with the
	    default being the current 100ms.

	  * To control to whom the signals are sent, the "kill_method" class
	    option can be set to "process_group" (the default, existing
	    behavior), which sends signals to the application and its
	    descendants directly, or "process" which sends signals only to the
	    application itself.

	  Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b

2017-07-05 12:44 +0000 [5d86da61a6]  Benjamin Keith Ford <bford@digium.com>

	* manager: Remove AMI "Queues" action.

	  When performing the "Queues" action via AMI, it outputs the same
	  text that the Asterisk CLI outputs when running a "queue show"
	  command, which does not conform with the AMI spec. "QueueStatus"
	  already does what the "Queues" action should do, so instead of
	  correcting the output, the "Queues" action will be removed and
	  "QueueStatus" should be used instead.

	  ASTERISK-27073 #close
	  Reported by: Brian

	  Change-Id: Id11743859758255b69cc3a557750d7a56c6d16f8

2017-07-03 07:30 +0000 [d58ef31acd]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Avoid setting maxfiles for a remote asterisk

	  Setting maxfiles (maximum number of open files) has no practical
	  effect on a remote asterisk (rasterisk, rasterisk -x).

	  It has an ill effect of printing an extra message, which
	  may be annoying in case of -x.

	  ASTERISK-27105 #close

	  Change-Id: Iaf9eb344e4b4b517df91b736b27ec55f6a6921a2

2017-07-05 15:31 +0000 [303f935a50]  George Joseph <gjoseph@digium.com>

	* http.c:  Reduce log spam

	  Messages like "fwrite() failed: Connection reset by peer" are no
	  help whatsoever, especially since they can be caused simply by a
	  client disconnecting.

	  * Make those WARNINGs DEBUGs.
	  * Check the return from ast_iostream_printf of headers.

	  Change-Id: I17bd5f3621514152a7b2b263c801324c5e96568b

2017-07-07 11:19 +0000 [8f72128e66]  Benjamin Keith Ford <bford@digium.com>

	* res_pjsip: Fix crash with from_user containing invalid characters.

	  If the from_user field contains certain characters (like @, {, ^, etc.),
	  PJSIP will return a null value for the URI when attempting to parse it.
	  This causes a crash when trying to dial out through a trunk that contains
	  these invalid characters in its from_user field.

	  This change checks the configuration and ensures that an endpoint will
	  not be created if the from_user contains an invalid character. It also
	  adds a null check to the PJSIP URI parsing as a backup.

	  ASTERISK-27036 #close
	  Reported by: Maxim Vasilev

	  Change-Id: I0396fdb5080604e0bdf1277464d5c8a85db913d0

2017-06-27 19:27 +0000 [03ae8b0105]  Richard Mudgett <rmudgett@digium.com>

	* json.c: Add backtrace log to find 'Invalid UTF-8 string' errors

	  Change-Id: I9020ff9f2b3749904317c0c173f47a1bbed6f929

2017-07-05 13:39 +0000 [9cd8a1df79]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Fix TURN deadlock by using ICE session group lock.

	  When a message is received on the TURN socket, the code processing the
	  message needs to call into the ICE/STUN session for further processing.
	  This code path locks the TURN group lock then the ICE/STUN group lock.  In
	  another thread an ICE/STUN timer can fire off to send a keep alive message
	  over the TURN socket.  In this code path, the ICE/STUN group lock is
	  obtained then the TURN group lock is obtained to send the packet.  A
	  classic deadlock case if the group locks are not the same.

	  * Made TURN get created using the ICE/STUN session's group lock.

	  NOTE: I was originally concerned that the ICE/STUN session can get
	  recreated by ice_reset_session() for an event like RTCP multiplexing
	  causing a change during SDP negotiation.  In this case the TURN group lock
	  would become different.  However, TURN is also recreated as part of the
	  ICE/STUN recreation in ice_create() when all known ICE candidates are
	  added to the new ICE session.  While the ICE/STUN and TURN sessions are
	  being recreated there is a period where the group locks could be
	  different.

	  ASTERISK-27023 #close
	  Patches:
	      res_rtp_asterisk-turn-deadlock-fix.patch (license #6502)
	          patch uploaded by Michael Walton (modified)

	  Change-Id: Ic870edb99ce4988a8c8eb6e678ca7f19da1432b9

2017-07-06 05:55 +0000 [7a4f577eb7]  George Joseph <gjoseph@digium.com>

	* Fix alembic branches

	  Change-Id: I04f607f084bda9b1b7f626e8e9735c37dc751187

2017-06-23 11:17 +0000 [1028f64be4]  Richard Mudgett <rmudgett@digium.com>

	* bridge_native_rtp.c: Fix direct media video RTP instance ACL check.

	  The video stream was using the audio stream RTP instance addresses to
	  check if the video RTP gets directed to an allowed direct media Access
	  Control List (ACL) address.  There is no guarantee that the video RTP
	  instance uses the same addresses as the audio RTP instance.

	  This looks like it has been a bug since v11 when direct media ACL was
	  first added to chan_sip and then faithfully reproduced through a couple
	  code refactorings into the new bridging architecture.

	  Change-Id: I8ddd56320e0eea769f3ceed3fa5b6bdfb51d681a

2017-07-05 10:29 +0000 [325eeced6a]  Sean Bright <sean.bright@gmail.com>

	* core: Remove 'Data Retrieval API'

	  This API was not actively maintained, was not added to new modules
	  (such as res_pjsip), and there exist better alternatives to acquire the
	  same information, such as the ARI.

	  Change-Id: I4b2185a83aeb74798b4ad43ff8f89f971096aa83

2017-06-19 11:22 +0000 [d556c67f9f]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: Add change priority of call

	  This patch include a feature to change the priority a caller in a
	  queue by CLI and AMI.

	  Change-Id: I55d520d71cc1cefe9a9b81fefaefc14679e96133

2017-07-03 10:59 +0000 [910c05455d]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Only when different, add TCP|TLS in autodomain (SIP Domain Support).

	  When sip.conf contained tcpenable=yes and autodomain=yes, the TCP domain was
	  added in any case, because of a local Boolean-negation error of the return value
	  of ast_sockaddr_cmp. After fixing this error for TCP and TLS, the TLS domain was
	  still always added with tlsenable=yes, because the domains were not compared
	  just on the address but also on the port – and TLS is always on a different port
	  than UDP/TCP.

	  ASTERISK-27106

	  Change-Id: I14fe9e319e238320b094016980445ef3a5b3337c

2017-07-03 10:38 +0000 [4398aa8fa4]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Fix a typo for tlsbindaddr in autodomain (SIP Domain Support).

	  Because of a copy-and-paste error when the struct ast_sockaddr changed,
	  tlsbindaddr was not added, when sip.conf contained autodomain=yes; see
	  "show sip domains" on the command-line interface (CLI) of Asterisk.

	  ASTERISK-27106

	  Change-Id: I3d0957150017c223136968ef1266f275d0d6695e

2017-06-29 13:58 +0000 [950b39a4f5]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: Cleanup ODBC connection handling

	  The primary focus of this patch is adding a missing call to
	  ast_odbc_release_obj(), but is also a general cleanup of the ODBC
	  related code in app_voicemail.

	  ASTERISK-27093 #close

	  Change-Id: I8e285142eaeb3146b4287a928276b70db76c902b

2017-06-30 23:57 +0000 [50ddb56dad]  Corey Farrell <git@cfware.com>

	* channel: Clear channel flag in error branch.

	  Clear channel flag AST_FLAG_END_DTMF_ONLY in ast_waitfordigit_full when
	  ast_read returns NULL.

	  ASTERISK-27100 #close

	  Change-Id: Id3039e9a4e74e0cb359f636c9fd0c9740ebf7d9d

2017-06-29 18:27 +0000 [b485f6c59c]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_distributor.c: Fix deadlock with TCP type transports.

	  When a SIP message comes in on a transport, pjproject obtains the lock on
	  the transport and pulls the data out of the socket.  Unlike UDP, the TCP
	  transport does not allow concurrent access.  Without concurrency the
	  transport lock is not released when the transport's message complete
	  callback is called.  The processing continues and eventually Asterisk
	  starts processing the SIP message.  The first thing Asterisk tries to do
	  is determine the associated dialog of the message to determine the
	  associated serializer.  To get the associated serializer safely requires
	  us to get the dialog lock.

	  To send a request or response message for a dialog, pjproject obtains the
	  dialog lock and then obtains the transport lock.  Deadlock can result
	  because of the opposite order the locks are obtained.

	  * Fix the deadlock by obtaining the serializer associated with the dialog
	  another way that doesn't involve obtaining the dialog lock.  In this case,
	  we use an ao2 container to hold the associated endpoint and serializer.
	  The new locks are held a brief time and won't overlap other existing lock
	  times.

	  ASTERISK-27090 #close

	  Change-Id: I9ed63f4da9649e9db6ed4be29c360968917a89bd

2017-06-29 18:22 +0000 [65a5ac0168]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_distributor.c: Fix unidentified_requests hash functions.

	  The OBJ_SEARCH_xxx defines should not be used as if they were individual
	  bits.  They represent a multi-bit enumeration value field.

	  Change-Id: I32abc9a475396dab02402a7014357dd94284e17b

2017-06-29 15:06 +0000 [e7d41050e0]  Kevin Harwell <kharwell@digium.com>

	* app_stream_echo: misc bug fixes

	  Fixed the following bugs:

	  * calls to stream_echo_write had the last two parameters swapped
	  * ast_read should have been ast_read_stream
	  * added a null check on the frame's subclass format

	  This also resets the update_sent flag upon receiving SRRCHANGE control frame.
	  This will then force a video update.

	  ASTERISK-26997

	  Change-Id: I6ad7c8253559b800800433c52339e7f5aa583566

2017-06-29 14:56 +0000 [7df7b8a90c]  Kevin Harwell <kharwell@digium.com>

	* res_rtp_asterisk: trigger source change control frame when dtls is established

	  There needed to be a way to notify handlers upstream that DTLS had been
	  established. This patch makes it so once DTLS has been estalished a source
	  change control frame is put into the read queue. Any handlers can then watch
	  for that frame and trigger off of it.

	  ASTERISK-27096 #close

	  Change-Id: I27ff344f5a8c691a1890dfe3254a4b1a49e7f4a0

2017-06-30 08:31 +0000 [f573e599c0]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Allow passing configure options to bundled

	  There wasn't any good way to pass options like --host or --build
	  down to the pjproject configure which makes cross-compiling difficult.

	  * Added a new PJPROJECT_CONFIGURE_OPTS environment variable which
	    can be used to pass arbitrary options to pjproject configure.
	  * Automatically set the pjproject configure --host and --build
	    options to match those supplied for the asterisk configure.

	  ASTERISK-27097 #close
	  Reported-by: Kinsey Moore

	  Change-Id: I5fa776e110262851173002a26ffe1172e4c35b2e

2017-06-29 14:50 +0000 [c0c99c7618]  George Joseph <gjoseph@digium.com>

	* chan_pjsip:  Fix ability to send UPDATE on COLP

	  When connected_line_method is "invite", we're supposed to determine
	  if the client can support UPDATE and if it can, send UPDATE instead
	  of INVITE to avoid the SDP renegotiation.  Not only was pjproject
	  not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
	  that invite_tsx wasn't NULL which isn't always the case.

	  * Updated chan_pjsip/update_connected_line_information to drop the
	    requirement that invite_tsx isn't NULL.
	  * Submitted patch to pjproject sip_inv.c that sets the
	    PJSIP_INV_SUPPORT_UPDATE flag correctly.
	  * Updated pjsip.conf.sample to clarify what happens when "invite"
	    is specified.

	  ASTERISK-27095

	  Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560

2017-06-15 03:12 +0000 [fb7247c57c]  Torrey Searle <torrey@voxbone.com>

	* res_pjsip:  Add DTMF INFO Failback mode

	  The existing auto dtmf mode reverts to inband if 4733 fails to be
	  negotiated.  This patch adds a new mode auto_info which will
	  switch to INFO instead of inband if 4733 is not available.

	  ASTERISK-27066 #close

	  Change-Id: Id185b11e84afd9191a2f269e8443019047765e91

2017-06-29 03:47 +0000 [ab7d99e62d]  Niklas Larsson <niklas@tese.se>

	* app_queue: Add priority to AMI QueueStatus

	  Add priority to callers in AMI QueueStatus response

	  ASTERISK-27092 #close

	  Change-Id: I8d1f737a72c7c38f4cfe1a4ee3ecc0a4f85bd199

2017-05-30 09:12 +0000 [45df25a579]  Mark Michelson <mmichelson@digium.com>

	* chan_pjsip: Add support for multiple streams of the same type.

	  The stream topology (list of streams and order) is now stored with the
	  configured PJSIP endpoints and used during the negotiation process.

	  Media negotiation state information has been changed to be stored
	  in a separate object. Two of these objects exist at any one time
	  on a session. The active media state information is what was previously
	  negotiated and the pending media state information is what the
	  media state will become if negotiation succeeds. Streams and other
	  state information is stored in this object using the index (or
	  position) of each individual stream for easy lookup.

	  The ability for a media type handler to specify a callback for
	  writing has been added as well as the ability to add file
	  descriptors with a callback which is invoked when data is available
	  to be read on them. This allows media logic to live outside of
	  the chan_pjsip module.

	  Direct media has been changed so that only the first audio and
	  video stream are directly connected. In the future once the RTP
	  engine glue API has been updated to know about streams each individual
	  stream can be directly connected as appropriate.

	  Media negotiation itself will currently answer all the provided streams
	  on an offer within configured limits and on an offer will use the
	  topology created as a result of the disallow/allow codec lines.

	  If a stream has been removed or declined we will now mark it as such
	  within the resulting SDP.

	  Applications can now also request that the stream topology change.
	  If we are told to do so we will limit any provided formats to the ones
	  configured on the endpoint and send a re-invite with the new topology.

	  Two new configuration options have also been added to PJSIP endpoints:

	  max_audio_streams: determines the maximum number of audio streams to
	  offer/accept from an endpoint. Defaults to 1.

	  max_video_streams: determines the maximum number of video streams to
	  offer/accept from an endpoint. Defaults to 1.

	  ASTERISK-27076

	  Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7

2017-06-28 09:03 +0000 [642f8356ab]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Fix issues with ICE renegotiation.

	  When re-inviting to add more streams it is possible for
	  the role of existing ICE sessions to be changed to the
	  incorrect value. This results in subsequent refreshes
	  within the sessions getting a role conflict and the ICE
	  session breaking down. This change only sets the role to
	  be the new value if an ICE renegotiation is actually
	  going to happen, otherwise the existing role is preserved.

	  As well if we encounter a situation where a unidirectional
	  ICE negotiation happens and the other side does not send us
	  candidates we will not store any information for sending
	  traffic, even though we know where they are reachable. This
	  change fixes this by using the source of the ICE traffic
	  itself as the target if no candidates are known and we
	  receive some ICE traffic.

	  ASTERISK-27088

	  Change-Id: I71228181e358917fcefc3100fad21b2fc02a59a9

2017-06-27 10:46 +0000 [a48d3e4d31]  Torrey Searle <torrey@voxbone.com>

	* res/res_pjsip_t38: fix incorrect increment of media_count

	  The T38 sdp callback incorrectly has a side effect of incrementing
	  the media_count.  This can lead to core dumps.

	  Change-Id: I7bb2f4987de4046ec52cfc34e5ea0662dae32af8

2017-06-08 22:50 +0000 [80e11bd79b]  George Joseph <gjoseph@digium.com>

	* bridge_native_rtp: Keep rtp instance refs on bridge_channel

	  There have been reports of deadlocks caused by an attempt to send a frame
	  to a channel's rtp instance after the channel has left the native bridge
	  and been destroyed.  This patch effectively causes the bridge channel to
	  keep a reference to the glue and both the audio and video rtp instances
	  so what gets started will get stopped.

	  ASTERISK-26978 #close
	  Reported-by: Ross Beer

	  Change-Id: I9e1ac49fa4af68d64826ccccd152593cf8cdb21a

2017-06-27 04:37 +0000 [7827755570]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* app_queue: Fix returning to dialplan when a queue is empty

	  The fix for ASTERISK-25665 introduced a regression.
	  The return value of queue_exec used to be 0 in case of leavewhenempty
	  but it was changed to -1 (returned from wait_our_turn and passed
	  transparently by queue_exec), thus leading to hangup instead of returning
	  back to dialplan.

	  This commit resets the value back to 0 in this case, restoring
	  original behavior.

	  ASTERISK-27065 #close
	  Reported by: Marek Cervenka

	  Change-Id: Id9c83b75aeda463250155e88c5004be52bbca5ac

2017-06-19 17:21 +0000 [0cef7b9d4e]  Alexei Gradinari <alex2grad@gmail.com>

	* app_voicemail: IMAP connection control

	  A new global option "imap_poll_logout" was added to specify whether need to
	  disconnect from the IMAP server after polling of mailboxes.

	  ASTERISK-27068 #close

	  Closing IMAP connection after loading mailbox from voicemail.conf

	  ASTERISK-24052 #close

	  Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a

2017-06-21 17:57 +0000 [975e271b01]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_mwi.c: Eliminate RAII_VAR in contact delete observer

	  Change-Id: I0bc97c6608de1d1a4228826b3b3be43f162f05f3

2017-06-16 18:08 +0000 [34db4c3993]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_mwi: update unsolicited MWI subscriptions on updating contact

	  Do not need to unsubscribe/subscribe on creating the ednpoint's contact.
	  The modified function create_mwi_subscriptions_for_endpoint adds
	  the subscription only if it does not exist.

	  The subscriptions aren't added for active contacts
	  which are retrieved on startup from realtime
	  if mwi_disable_initial_unsolicited=yes.
	  Because the mwi_contact_added is not called.
	  So the subscriptions also should be created on updating contact.

	  ASTERISK-26230 #close

	  Change-Id: I47e265af9296ca09aa42a316fdacac104148cee4

2017-06-20 16:05 +0000 [27dae55fb6]  Kevin Harwell <kharwell@digium.com>

	* core_local: local channel data not being properly unref'ed and unlocked

	  In an earlier version of Asterisk a local channel [un]lock all functions were
	  added in order to keep a crash from occurring when a channel hung up too early
	  during an attended transfer. Unfortunately, when a transfer failure occurs and
	  depending on the timing, the local channels sometime do not get properly
	  unlocked and deref'ed after being locked and ref'ed. This happens because the
	  underlying local channel structure gets NULLed out before unlocking.

	  This patch reworks those [un]lock functions and makes sure the values that get
	  locked and ref'ed later get unlocked and deref'ed.

	  ASTERISK-27074 #close

	  Change-Id: Ice96653e29bd9d6674ed5f95feb6b448ab148b09

2017-06-20 16:01 +0000 [45a1f4e2ae]  Kevin Harwell <kharwell@digium.com>

	* bridge: stuck channel(s) after failed attended transfer

	  If an attended transfer failed it was possible for some of the channels
	  involved to get "stuck" because Asterisk was not hanging up the transfer target.

	  This patch ensures Asterisk hangs up the transfer target when an attended
	  transfer failure occurs.

	  ASTERISK-27075 #close

	  Change-Id: I98a6ecd92d3461ab98c36f0d9451d23adaf3e5f9

2017-06-19 11:28 +0000 [a7488f8a70]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* cdr: fix mistake spelling of a word for Unanswered.

	  Change-Id: I7a610bef369924523a445c7e849ee88cc45dc5df

2017-06-12 16:17 +0000 [d7b6e06abb]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_mwi: unsubscribe unsolicited MWI on deleting endpoint last contact

	  If the endpoint's last contact is deleted unsolicited MWI has to be
	  unsubscribed.

	  ASTERISK-27051 #close

	  Change-Id: I33e174e0b9dba0998927d16d6d100fda5c7254e0

2017-06-16 09:31 +0000 [854a6de819]  George Joseph <gjoseph@digium.com>

	* res_stasis:  Plug reference leak on stolen channels

	  When a stasis channel is stolen by another app, the control
	  structure is unreffed but never unlinked from the app_controls
	  container.  This causes the channel reference to leak.

	  Added OBJ_UNLINK to the callback in channel_stolen_cb.

	  Also added some additional channel lifecycle debug messages to
	  channel.c.

	  ASTERISK-27059 #close
	  Repoorted-by: George Joseph

	  Change-Id: Ib820936cd49453f20156971785e7f4f182c56e14

2017-06-16 14:56 +0000 [e33bd96638]  Matthew Fredrickson <creslin@digium.com>

	* formats/format_g729: Fix typo in comment

	  There was a typo in a comment.  This commit is to fix the typo.

	  ASTERISK-27060 #close

	  Change-Id: Ic2699f8dbeaacd58ccb6ec3203e853e1babe3235

2017-06-08 12:28 +0000 [0ad95bc8a0]  Frederic LE FOLL <frederic.lefoll@c-s.fr>

	* Core/PBX: Deadlock between dialplan execution and application unregistration.

	  Not easy to reproduce, but we have noticed deadlocks when unloading a module
	  while dialplan is handling a request.

	  The deadlock is between :
	  1) Dialplan execution: pbx_extension_helper() first taking conlock,
	  then pbx_findapp() [when called] asking for lock on apps list.
	  2) Application unregistration: ast_unregister_application() first taking lock
	  on apps list, then unreference_cached_app() [when called] asking for conlock.

	  As a protection, I suggest to modify ast_unregister_application(), so that it
	  anticipates the need of conlock, before taking the lock on apps list.
	  The side effect is a longer unavailability of conlock when unregistering an
	  application.

	  ASTERISK-27041

	  Change-Id: I0db0f1eb320da6a5758cce3a47d765be1face8e2

2017-06-12 09:23 +0000 [7a46309d3d]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: New endpoint option "notify_early_inuse_ringing"

	  This option was added to control whether to notify dialog-info state
	  'early' or 'confirmed' on Ringing when already INUSE.
	  The value "yes" is useful for some SIP phones (Cisco SPA)
	  to be able to indicate and pick up ringing devices.

	  ASTERISK-26919 #close

	  Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711

2017-06-15 13:48 +0000 [53b7df82f4]  Alexei Gradinari <alex2grad@gmail.com>

	* app_voicemail: IMAP logout on reload/unload

	  Closing IMAP connection on module reload or unload.

	  ASTERISK-24052 #close

	  Change-Id: I2a40182aa9ef249fa6865d33570430e9ada68525

2017-03-30 09:33 +0000 [9aeab4aced]  Jan Friesse <jfriesse@redhat.com>

	* res_corosync: Change thread stack size

	  In Corosync 2.x libraries were changed to use LibQB IPC.
	  Sadly LibQB IPC doesn't support copy-free access to received buffer, so
	  Corosync libraries were rewritten to use stack as buffer. Mostly the
	  needed stack size is quite small, but for all *_dispatch functions, 1MiB
	  is needed.

	  Asterisk function ast_pthread_create_background set stack size for new
	  thread to much smaller AST_BACKGROUND_STACKSIZE (~500KiB).

	  This results in Asterisk crash when running with Corosync 2.x.

	  Patch solves this issue by creating it's own version of
	  ast_pthread_create_background which sets stack size to much higher value
	  (actually it's AST_BACKGROUND_STACKSIZE + 3MiB).

	  Another problem may appear when "corosync show members" netconsole
	  command is executed. It is also executed in thread and also has only
	  500KiB stack size. Sadly it calls corosync_cfg_get_node_addrs which
	  again needs at least 1MiB stack.

	  Solution is to use HAVE_COROSYNC_CFG_STATE_TRACK as a discriminator
	  between Corosync 1.x and 2.x. If 1.x is found, nothing changes. If 2.x
	  is found, NodeID is displayed instead of IP address.

	  ASTERISK-25370 #close
	  Reported by: mdu113

	  Change-Id: Id95b0d21ab6e708e7d74ad8786c587211676fa08

2017-06-13 11:33 +0000 [1ac0096512]  George Joseph <gjoseph@digium.com>

	* res_ari:  Add "module loaded" check to ari stubs

	  The recent change to make the use of LOAD_DECLINE more consistent
	  caused res_ari to unload itself before declining if the ari.conf
	  file wasn't found.  The ari stubs though still tried to use the
	  configuration resulting in segfaults.

	  This patch creates a new CHECK_ARI_MODULE_LOADED macro which tests
	  to see if res_ari is actually loaded and causes the stubs to also
	  decline if it isn't.  The macro was then added to the mustache
	  template's "load_module" function.

	  ASTERISK-27026 #close
	  Reported-by: Ronald Raikes

	  Change-Id: I263d56efa628ee3c411bdcd16d49af6260c6c91d

2017-06-15 12:33 +0000 [11ec2945c7]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip: Fix PJSIP_MEDIA_OFFER dialplan function read.

	  The construction of the returned string assumed incorrectly that the
	  supplied buffer would always be initialized as an empty string.  If it is
	  not an empty string we could overrun the supplied buffer by the length of
	  the non-empty buffer string plus one.  It is also theoreticaly possible
	  for the supplied buffer to be overrun by a string terminator during a read
	  operation even if the supplied buffer is an empty string.

	  * Fix the assumption that the supplied buffer would already be an empty
	  string.  The buffer is not guaranteed to contain an empty string by all
	  possible callers.

	  * Fix string terminator buffer overrun potential.

	  Change-Id: If6a0806806527678c8554b1dcb34fd7808aa95c9

2017-06-08 11:38 +0000 [e563a1920e]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Add get/set option calls for RTP sched context per type.

	  Change-Id: I82dc75c63c48904e9e5a49e2205dcc06e88487e4

2017-05-11 18:49 +0000 [716abaf33d]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Search for the ice-lite attribute in the right place.

	  * Pulled finding the rtcp-mux attribute flag out of the ICE candidate for
	  loop.  Also ordered the RTCP ICE candidate skip test to fail earlier.

	  Change-Id: I8905d9c68563027a46cd3ae14dbcc27e9c814809

2017-05-11 18:46 +0000 [a95584d079]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Set the remote c= line in RTP instance.

	  Change-Id: I23b646392082deab65bedeb19b12dcbcb9216d0c

2017-06-09 19:03 +0000 [06265b8c8a]  Richard Mudgett <rmudgett@digium.com>

	* stream: Add ast_stream_topology_del_stream() and unit test.

	  Change-Id: If07e3c716a2e3ff85ae905c17572ea6ec3cdc1f9

2017-05-11 14:09 +0000 [0fdb99c268]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Add t= line in sdp_create_from_state()

	  Change-Id: I4060391328a893101ed87d0d9bacbbab4fd8b141

2017-06-14 13:07 +0000 [4797a8bb81]  Richard Mudgett <rmudgett@digium.com>

	* stream: Ignore declined streams for some topology calls.

	  * Made ast_format_cap_from_stream_topology() not include any formats from
	  declined streams.

	  * Made ast_stream_topology_get_first_stream_by_type() ignore declined
	  streams to return the first active stream of the type.

	  * Updated unit tests to check these changes have the expected effect.

	  Change-Id: Iabbc6a3e8edf263a25fd3056c3c614407c7897df

2017-06-15 07:32 +0000 [bd16c3c524]  Joshua Colp <jcolp@digium.com>

	* channel: Fix reference counting in ast_channel_suppress.

	  The ast_channel_suppress function wrongly decremented the
	  reference count of the underlying structure used to keep
	  track of what should be suppressed on a channel if the
	  function was called multiple times on the same channel.

	  This change cleans up the reference counting a bit so
	  this no longer occurs.

	  ASTERISK-27016

	  Change-Id: I2eed4077cb4916e6626f9f120b63b963acc5c136

2017-06-14 12:34 +0000 [b8b0b61a24]  Richard Mudgett <rmudgett@digium.com>

	* app_voicemail.c: Fix compile error when IMAP enabled.

	  Change-Id: I2703f15b4099b4210c68eccf293105d1975c1fc1

2017-06-12 17:55 +0000 [023eede265]  Alexei Gradinari <alex2grad@gmail.com>

	* app_voicemail: IMAP logout on MWI unsubscribe

	  Closing IMAP connection on MWI unsubscribe.

	  ASTERISK-24052 #close

	  Change-Id: I4ff964026002b2817b48c20fb4239f0a880228fd

2017-06-14 11:12 +0000 [65ed2ea311]  George Joseph <gjoseph@digium.com>

	* res_pjsip_pubsub:  Fix reference to released endpoint

	  destroy_subscription was attempting to get the id of the
	  subscription tree's endpoint after we'd already called ao2_cleanup
	  on it causing a segfault.

	  Moved the cleanup until after the debug statement and since
	  endpoint could also be NULL at this point, check for that as well.

	  ASTERISK-27057 #close
	  Reported-by: Ryan Smith

	  Change-Id: Ice0a7727f560cf204d870a774c6df71e159b1678

2017-06-14 08:29 +0000 [ea3f8c6889]  George Joseph <gjoseph@digium.com>

	* res_pjsip_session:  Correct inverted test in session_outgoing_nat_hook

	  There was a typo introduced in commit 776ffd77 which was preventing
	  the transport's external media address from being used.

	  ASTERISK-27024 #close
	  Reported-by: Christopher van de Sande
	  patches:
	  	patch.diff submitted by Florian Floimair (license 6892)

	  Change-Id: I7ec617171eaa2d86d2680b00cf37d5088adafc27

2017-06-14 08:54 +0000 [88f18faf2a]  George Joseph <gjoseph@digium.com>

	* res_rtp_asterisk:  Fix ssrc change for rtcp srtp

	  It looks like there was a copy/paste error in ast_rtp_change_source
	  where if there was a rtcp srtp instance, instead of updating its
	  ssrc we were updating the srtp instance ssrc twice.

	  ASTERISK-27022 #close
	  Reported-by: Michael Walton

	  Change-Id: Ic88f3aee7227b401c58745ac265ff92c19620095

2017-06-08 14:38 +0000 [d6386a8f0c]  Joshua Colp <jcolp@digium.com>

	* bridge: Add a deferred queue.

	  This change adds a deferred queue to bridging. If a bridge
	  technology determines that a frame can not be written and
	  should be deferred it can indicate back to bridging to do so.
	  Bridging will then requeue any deferred frames upon a new
	  channel joining the bridge.

	  This change has been leveraged for T.38 request negotiate
	  control frames. Without the deferred queue there is a race
	  condition between the bridge receiving the T.38 request
	  negotiate and the second channel joining and being in the
	  bridge. If the channel is not yet in the bridge then the T.38
	  negotiation fails.

	  A unit test has also been added that confirms that a T.38
	  request negotiate control frame is deferred when no other
	  channel is in the bridge and that it is requeued when a new
	  channel joins the bridge.

	  ASTERISK-26923

	  Change-Id: Ie05b08523f399eae579130f4a5f562a344d2e415

2017-06-13 14:17 +0000 [9e53c30610]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_refer/session: Calls dropped during transfer

	  When doing an attended transfer it's possible for the transferer, after
	  receiving an accepted response from Asterisk, to send a BYE to Asterisk,
	  which can then be processed before Asterisk has time to start and/or
	  complete the transfer process. This of course causes the transfer to not
	  complete successfully, thus dropping the call.

	  This patch makes it so any BYEs received from the transferer, after the REFER,
	  that initiate a session end are deferred until the transfer is complete. This
	  allows the channel that would have otherwise been hung up by Asterisk to
	  remain available throughout the transfer process.

	  ASTERISK-27053 #close

	  Change-Id: I43586db79079457d92d71f1fd993be9a3b409d5a

2017-06-13 10:47 +0000 [b2fd7e5069]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Use the asterisk github mirror for download

	  We now mirror the pjproject tarball and md5 at
	  https://github.com/asterisk/third-party/tree/master/pjproject

	  To improve download reliability, we now get the tarball from
	  our mirror instead of from pjsip.org.

	  ASTERISK-27052 #close
	  Reported-by: 'alex'

	  Change-Id: I60236587a8935bfa71fcc391f4e2ecb31918c08a

2017-06-12 09:57 +0000 [42f738e052]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_mwi: don't create mwi subscriptions if initial unsolicited disabled

	  If sending unsolicited mwi to all endpoints on startup is disabled
	  (mwi_disable_initial_unsolicited=yes) do not need to create subscriptions.
	  If there are many (thousands) realtime endpoints configured with unsolicited mwi
	  and Vociemail Storage configured as ODBC or IMAP there will be huge number of
	  DB/IMAP requests on startup.

	  ASTERISK-26230 #close

	  Change-Id: I50ae909639e3ee298b931a54def4b2b9e0fb86c5

2017-06-11 12:06 +0000 [847087a4ff]  Sean Bright <sean.bright@gmail.com>

	* codecs.conf.sample: Fix max_bandwidth speling error

	  Reported by Sylvain Boily via asterisk-dev mailing list.

	  Change-Id: Idc7623f335aea3e144dd369ba383b9a757480a9d

2017-06-08 17:31 +0000 [8d1f54b92e]  Jørgen H <asterisk.org@hovland.cx>

	* res_pjsip_transport_websocket: Add NULL check in get_write_timeout

	  Added check for NULL return value when calling
	  ast_sorcery_retrieve_by_id in function get_write_timeout

	  ASTERISK-27046

	  Change-Id: I9357717278da631c3a1cb502c412693929b0cb41

2017-06-08 10:54 +0000 [d27168d36f]  Guido Falsi <madpilot@freebsd.org>

	* BuildSystem: Add patches to allow building with recent LibreSSL

	  Add some #if defined checks which allow building against LibreSSL.
	  These patchess come from OpenBSD ports:
	  https://cvsweb.openbsd.org/cgi-bin/cvsweb/ports/telephony/asterisk/patches/

	  ASTERISK-27043 #close
	  Reported by: OpenBSD ports

	  Change-Id: I2f6c08a5840b85ad4d2b75370b947ddde7a9a572

2017-06-06 14:54 +0000 [fcb1a0d7e8]  David M. Lee <dlee@respoke.io>

	* CFLAGS for BIND8 support

	  Some systems (like macOS) require BIND_8_COMPAT to be defined so that
	  the nameser libraries are, well, BIND8 compatible.

	  Change-Id: If79fc27a64f90de1835b5aa3aadfa9be22bd16b0

2017-06-08 10:36 +0000 [7b668297f3]  Guido Falsi <madpilot@freebsd.org>

	* BuildSystem: Fix build on FreeBSD due to missing crypt.h

	  FreeBSD does not include a crypt.h include file. Definitions for
	  crypt() and crypt_r() are in unistd.h

	  ASTERISK-27042 #close

	  Change-Id: Ib307ee5e384870c6af50efa89fb73722dd0c3a7e

2017-06-07 15:19 +0000 [5b80496b42]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Update device state when in early media.

	  The chan_pjsip module uses a calculation approach for
	  determining device state. This means that in situations
	  where we would expect device state to change we need to
	  tell the core to query. A scenario that was missed is
	  when early media was signaled.

	  This change adds the notification for the core to
	  query device state when we are told that early media
	  is being provided.

	  ASTERISK-27039

	  Change-Id: Iafebfd152894966344ff2e950a3cee9f59a3eb6f

2017-06-07 14:32 +0000 [e497a76d24]  Sean Bright <sean.bright@gmail.com>

	* eventfd: Disable during cross compilation

	  Reported by Lonnie Abelbeck <lonnie@abelbeck.com> via private e-mail.

	  Change-Id: Icc80f12b8d8d591e14a8e0ed9f1c02cbd193a89b

2017-06-07 11:21 +0000 [19da99df2f]  Alexei Gradinari <alex2grad@gmail.com>

	* CHANGES: correct version for a new option 'refer_blind_progress'

	  Change-Id: If4817d26a8974610827624fb8a4e56d681d6bf97

2017-06-06 07:04 +0000 [d3e951edf5]  Joshua Colp <jcolp@digium.com>

	* pjsip: Extend 'asymmetric_rtp_codec' option to include us changing.

	  PJSIP support in Asterisk differs from chan_sip in that it
	  allows media to be sent as-is without transcoding provided
	  the codecs were negotiated in the SDP. This is allowed
	  according to the RFC. Support for this differs quite a lot
	  though and some endpoints do not handle it well.

	  This change extends the 'asymmetric_rtp_codec' option to
	  also cover this case. When set to no (the default) the code
	  behaves as chan_sip does - the best codec is selected and
	  we will only ever send that, unless we change what we are
	  sending if the remote side changes. When set to yes we
	  will send media as-is without transcoding if the codec
	  has been negotiated in the SDP.

	  ASTERISK-26996

	  Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51

2017-06-06 10:04 +0000 [b3ca24d216]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_multicast: Use consistent timestamps when possible

	  When a frame destined for a MulticastRTP channel does not have timing
	  information (such as when an 'originate' is done), we generate the RTP
	  timestamps ourselves without regard to the number of samples we are
	  about to send.

	  Instead, use the same method as res_rtp_asterisk and 'predict' a
	  timestamp given the number of samples. If the difference between the
	  timestamp that we generate and the one we predict is within a specific
	  threshold, use the predicted timestamp so that we end up with timestamps
	  that are consistent with the number of samples we are actually sending.

	  Change-Id: I2bf0db3541b1573043330421cbb114ff0f22ec1f

2017-05-31 10:41 +0000 [861984eac0]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add support for returning only reachable contacts and use it.

	  This introduces the ability for PJSIP code to specify filtering flags
	  when retrieving PJSIP contacts. The first flag for use causes the
	  query code to only retrieve contacts that are not unreachable. This
	  change has been leveraged by both the Dial() process and the
	  PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
	  calls to contacts which are not unreachable.

	  ASTERISK-26281

	  Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c

2017-06-05 11:27 +0000 [d8802a6a0f]  Kevin Harwell <kharwell@digium.com>

	* channel: ast_write frame wrongly freed after call to audiohooks

	  ASTERISK-26419 introduced a bug when calling ast_audiohook_write_list in
	  ast_write. It would free the frame given to ast_write if the frame returned
	  by ast_audiohook_write_list was different than the given one. The frame give
	  to ast_write should never be freed within that function. It is the caller's
	  resposibility to free the frame after writing (or when it its done with it).
	  By freeing it within ast_write this of course led to some memory corruption
	  problems.

	  This patch makes it so the frame given to ast_write is no longer freed within
	  the function. The frame returned by ast_audiohook_write_list is now subsequently
	  used in ast_write and is freed later. It is freed either after translate if the
	  frame returned by translate is different, or near the end of ast_write prior to
	  function exit.

	  ASTERISK-26973 #close

	  Change-Id: Ic9085ba5f555eeed12f6e565a638c3649695988b

2017-05-31 11:45 +0000 [001f4ddda4]  Sean Bright <sean.bright@gmail.com>

	* pbx_builtin: Properly handle hangup during Background

	  Before this patch, when a user hung up during a Background, we would
	  stuff 0xff into a char and attempt a dialplan lookup of it. This caused
	  problems for some realtime engines which interpreted the value as the
	  beginning of an invalid UTF-8 sequence.

	  ASTERISK-19291 #close
	  Reported by: Andrew Nowrot

	  Change-Id: I8ca6da93252d61c76ebdb46a4aa65e73ca985358

2017-05-31 04:25 +0000 [f6eeaaafd5]  Joshua Colp <jcolp@digium.com>

	* channel / app_meetme: Fix parentheses.

	  ASTERISK-27025

	  Change-Id: Id736b0aa4ec6b6b0f04663d64fa8d151f81fdbed

2017-05-30 16:07 +0000 [9dce4a947b]  Sean Bright <sean.bright@gmail.com>

	* stasis_recording: Correct ast_asprintf error checking

	  ASTERISK-27021 #close
	  Reported by: Tim Morgan

	  Change-Id: I0ac061f040093e806c3b1f4e2340864f3ce4dd75

2017-05-28 15:43 +0000 [5c27fe2187]  Sean Bright <sean.bright@gmail.com>

	* format: Reintroduce smoother flags

	  In review 4843 (ASTERISK-24858), we added a hack that forced a smoother
	  creation when sending signed linear so that the byte order was adjusted
	  during transmission. This was needed because smoother flags were lost
	  during the new format work that was done in Asterisk 13.

	  Rather than rolling that same hack into res_rtp_multicast, re-introduce
	  smoother flags so that formats can dictate their own options.

	  Change-Id: I77b835fba0e539c6ce50014a984766f63cab2c16

2017-05-24 10:09 +0000 [39d14834f8]  Mark Michelson <mmichelson@digium.com>

	* Confbridge: Add "sfu" video mode to bridge profile options.

	  A previous commit added plumbing to bridge_softmix to allow for an SFU
	  experience with Asterisk. This commit adds an option to app_confbridge
	  that allows for a confbridge to actually make use of the SFU video mode.

	  SFU mode is implemented in a "set it and forget it" kind of way. That
	  is, when the bridge is created, if SFU mode is enabled, then the video
	  mode gets set to SFU and cannot be changed. Future improvements may
	  allow for a hybrid experience (e.g. forward multiple video streams,
	  specifically those of the most recent talkers), but for this addition,
	  no such capability is present.

	  Change-Id: I87bbcb63dec6dbbb42488f894871b86f112b2020

2017-05-05 11:56 +0000 [2da869408a]  Mark Michelson <mmichelson@digium.com>

	* Add primitive SFU support to bridge_softmix.

	  This sets up the "plumbing" in bridge_softmix to
	  be able to accommodate Asterisk asking as an SFU
	  (selective forwarding unit) for conferences.

	  The way this works is that whenever a channel enters or leaves a
	  conference, all participants in the bridge get sent a stream topology
	  change request. The topologies consist of the channels' original
	  topology, along with video destination streams corresponding to each
	  participants' source video streams. So for instance, if Alice, Bob, and
	  Carol are in the conference, and each supplies one video stream, then
	  the topologies for each would look like so:

	  Alice:
	  Audio,
	  Source video(Alice),
	  Destination Video(Bob),
	  Destination video (Carol)

	  Bob:
	  Audio,
	  Source video(Bob)
	  Destination Video(Alice),
	  Destination video (Carol)

	  Carol:
	  Audio,
	  Source video(Carol)
	  Destination Video(Alice),
	  Destination video (Bob)

	  This way, video that arrives from a source video stream can then be
	  copied out to the destination video streams on the other participants'
	  channels.

	  Once the bridge gets told that a topology on a channel has changed, the
	  bridge constructs a map in order to get the video frames routed to the
	  proper destination streams. This is done using the bridge channel's
	  stream_map.

	  This change is bare-bones with regards to SFU support. Some key features
	  are missing at this point:

	  * Stream limits. This commit makes no effort to limit the number of
	    streams on a specific channel. This means that if there were 50 video
	    callers in a conference, bridge_softmix will happily send out topology
	    change requests to every channel in the bridge, requesting 50+
	    streams.

	  * Configuration. The plumbing has been added to bridge_softmix, but
	    there has been nothing added as of yet to app_confbridge to enable SFU
	    video mode.

	  * Testing. Some functions included here have unit tests.
	    However, the functionality as a whole has only been verified by
	    hand-tracing the code.

	  * Selectivenss. For a "selective" forwarding unit, this does not
	    currently have any means of being selective.

	  * Features. Presumably, someone might wish to only receive video from
	    specific sources. There are no external-facing functions at the moment
	    that allow for users to select who they receive video from.

	  * Efficiency. The current scheme treats all video streams as being
	    unidirectional. We could be re-using a source video stream as a
	    desetnation, too. But to simplify things on this first round, I did it
	    this way.

	  Change-Id: I7c44a829cc63acf8b596a337b2dc3c13898a6c4d

2017-05-30 09:34 +0000 [045d7b8cb7]  Sean Bright <sean.bright@gmail.com>

	* format_mp3: Re-work menuselect/build issues

	  Rather than removing format_mp3 from ALL_C_MODS (which caused format_mp3
	  to not show up in menuselect), use .PHONY targets when the necessary
	  source files are not present.

	  ASTERISK-23951
	  Reported by: Tzafrir Cohen

	  Change-Id: I0a7512c51acc9e86043671795020b0de725bd9e8

2017-05-30 09:43 +0000 [80206cdc65]  George Joseph <gjoseph@digium.com>

	* test_json:  Fix test names with reserved words

	  Some of the test names were actually reserved words (true, false,
	  int, null, string, bool).  When the jenkins test results analyzer
	  does its thing it tries to create a map using the test names as
	  keys and fails because they're reserved words.

	  Added "type_" to those test names.

	  Change-Id: I90d809f46969c78a1c605b736ff0635196a2cf1b

2017-05-26 11:41 +0000 [9c4f63263c]  Joshua Colp <jcolp@digium.com>

	* manager: Clear the flag on the other channel.

	  During the channel flag audit an incorrect change was
	  done. The flag should be cleared on the second channel.

	  ASTERISK-26469

	  Change-Id: I770c5a389550a2fb5a6ade942fccbb2e1d9199c8

2017-05-26 11:15 +0000 [1f136fe885]  Sean Bright <sean.bright@gmail.com>

	* res_srtp: Add support for libsrtp2

	  ASTERISK-25294 #close
	  Reported by: Tzafrir Cohen

	  ASTERISK-26976 #close
	  Reported by: Alex

	  Change-Id: I789b1c3d1ed31365bbd9339fa58ef36f48833c40

2017-05-25 11:10 +0000 [59348aa182]  Sean Bright <sean.bright@gmail.com>

	* format_mp3: Don't try to build format_mp3 if we don't have sources

	  ASTERISK-23951 #close
	  Reported by: Tzafrir Cohen

	  Change-Id: Iebf181d44bb735787fde4b5be863c4d7e2478a30

2017-05-23 11:07 +0000 [44c5a144ce]  Martin Tomec <tomec.martin@gmail.com>

	* Sqlite3: make busy_timeout configurable.

	  Enables runtime configuration of busy_timeout for sqlite databases.
	  Default timeout remains 1000ms.

	  ASTERISK-27014 #close

	  Change-Id: I8921a3aac3c335843be4cb17d2dd0a5c157a36da

2017-05-24 15:50 +0000 [08edd54c1b]  George Joseph <gjoseph@digium.com>

	* unittests:  Add a unit test that causes a SEGV and...

	  ...that can only be run by explicitly calling it with
	  'test execute category /DO_NOT_RUN/ name RAISE_SEGV'

	  This allows us to more easily test CI and debugging tools that
	  should do certain things when asterisk coredumps.

	  To allow this a new member was added to the ast_test_info
	  structure named 'explicit_only'.  If set by a test, the test
	  will be skipped during a 'test execute all' or
	  'test execute category ...'.

	  Change-Id: Ia3a11856aae4887df9a02b6b081cc777b36eb6ed

2017-05-23 15:42 +0000 [d847fe6585]  Sean Bright <sean.bright@gmail.com>

	* res_agi: Allow configuration of audio format of EAGI pipe

	  This change allows the format of the EAGI audio pipe to be changed by
	  setting the dialplan variable 'EAGI_AUDIO_FORMAT' to the name of one of
	  the loaded formats.

	  ASTERISK-26124 #close

	  Change-Id: I7a10fad401ad2a21c68c2e7246fa357d5cee5bbd

2017-05-23 13:33 +0000 [e2e6baa8d8]  Sean Bright <sean.bright@gmail.com>

	* res_agi: Clarify 'RECORD FILE' documentation

	  Documented the 'beep' option in both the parameters list and the command
	  description.

	  ASTERISK-23839 #close

	  Change-Id: I4970395c922dbdce3f7cf0f56d5b065ec9aa53ea

2017-05-23 13:06 +0000 [3dcb3c88aa]  Sean Bright <sean.bright@gmail.com>

	* res_agi: Prevent crash when SET VARIABLE called without arguments

	  Explicitly check that the appropriate number of arguments were passed to
	  SET VARIABLE before attempting to reference them. Also initialize the
	  arguments array to zeroes before populating it.

	  ASTERISK-22432 #close

	  Change-Id: I5143607d80a2724f749c1674f3126b04ed32ea97

2017-05-23 12:35 +0000 [e490aa3176]  Sean Bright <sean.bright@gmail.com>

	* res_agi: Fix malformed AGI usage response

	  If the generated XML documentation for a command does not end with a \n,
	  the postamble of the usage message does not appear on its own line.

	  ASTERISK-25662 #close

	  Change-Id: If190f1e9e37fe215fed95897d78d4a6e142b0020

2017-05-23 10:06 +0000 [8ae0227cf3]  Sean Bright <sean.bright@gmail.com>

	* res_format_attr_h26x: Trim blanks in fmtp attributes

	  Some devices separate format attributes with a semicolon followed by a
	  space, so trim blanks before trying to match them.

	  ASTERISK-27008 #close

	  Change-Id: Ia44cb2e4fef5c73dc541a29da79cb0e19c22d9cc

2017-05-15 15:03 +0000 [faab058014]  Joshua Colp <jcolp@digium.com>

	* app_queue: Fix members showing as being in call when not.

	  A change was done which added an 'in_call' flag to queue
	  members that was set to true while talking to an agent.
	  Unfortunately in practice this does not accurately reflect
	  whether they are talking to an agent or not. If a Local
	  channel is involved and a transfer is performed then the
	  app_queue application would incorrectly think the agent
	  was still in a call with the caller. This was done to
	  fix a race condition between an agent becoming available
	  by device state and the checking of the last call information
	  for the wrapup time. There was a small window where the
	  last call information would be the previous value instead
	  of the new one.

	  This change goes about fixing the original issue in a
	  different way by considering the call completed if device
	  state is received which would make the agent available
	  and if they are currently in a call. If this occurs the
	  last call information is updated before the agent becomes
	  available ensuring that old information is not present
	  when checking if the member should be called. This also
	  improves the transfer situation by actually updating
	  and enforcing the wrapup time.

	  ASTERISK-26399
	  ASTERISK-26400
	  ASTERISK-26715
	  ASTERISK-26975

	  Change-Id: Ife1cb686e3173b3a6d368601adef9aff69d4beea

2017-05-23 05:45 +0000 [36e90952ec]  Robert Mordec <r.mordec@slican.pl>

	* app_confbridge: Race between removing and playing name recording while leaving

	  When user leaves a conference, its channel calls async_play_sound_file()
	  in order to play the name announcement and then unlinks the sound file.
	  The async_play_sound_file() function adds a task to conference playback queue,
	  which then runs playback_common() function in a different thread.

	  It leads to a race condition when, in some cases, channel thread may unlink
	  the sound file before playback_common() had a chance to open it.

	  This patch creates a file deletion task, that is queued after playback.

	  ASTERISK-27012 #close

	  Change-Id: I412f7922d412004b80917d4e892546c15bd70dd3

2017-05-22 13:51 +0000 [440ff38c08]  Kevin Harwell <kharwell@digium.com>

	* res_rtp_asterisk: rtcp mux using the wrong srtp unprotecting algorithm

	  When using rtcp mux if an rtcp payload came in it would still use the srtp
	  unprotect algorithm instead of the srtp unprotect rtcp method. Since rtcp
	  data was being passed to the rtp unprotect method this would result in an
	  error.

	  This patch ensures that the correct unprotect method is chosen by making
	  sure the passed in rtcp flag is appropriately set when rtcp mux is enabled
	  and an rtcp payload is received.

	  ASTERISK-26979 #close

	  Change-Id: Ic5409f9d1a267f1d4785fc5aed867daaecca6241

2017-05-19 10:05 +0000 [0f487978a9]  Sean Bright <sean.bright@gmail.com>

	* chan_sip: Better ICE handling for RTCP-MUX

	  If we are offered or are offering RTCP-MUX, don't consider RTCP ICE
	  candidates. This confuses certain browsers (current Firefox for
	  example) and causes intial audio setup delays.

	  ASTERISK-26982 #close

	  Change-Id: Ifeaf47e83972fe8dbe58b7fb3d6d1823400cfb91

2017-05-12 10:38 +0000 [be4beff3e4]  Steve Davies <steve@one47.co.uk>

	* app_queue: Add QUEUE_RAISE_PENALTY feature

	  Additional variable to work alongside QUEUE_MAX_PENALTY and QUEUE_MIN_PENALTY,
	  including an extra parameter in queuerules.conf. This value causes lower
	  Agent penalty values to "raise up" so that they can join higher penalty agents
	  and be treated equally after a period of time.

	  ASTERISK-26995 #close

	  Change-Id: If1c6421a983667a5ac4c359f6dac25b212b4c459

2017-04-13 17:17 +0000 [7c0466092c]  Mark Michelson <mmichelson@digium.com>

	* AST-2017-003: Handle zero-length body parts correctly.

	  ASTERISK-26939 #close

	  Change-Id: I7ea235ab39833a187db4e078f0788bd0af0a24fd

2017-04-13 11:14 +0000 [949e9147bf]  George Joseph <gjoseph@digium.com>

	* AST-2017-004: chan_skinny:  Add EOF check in skinny_session

	  The while(1) loop in skinny_session wasn't checking for EOF so
	  a packet that was longer than a header but still truncated
	  would spin the while loop infinitely.  Not only does this
	  permanently tie up a thread and drive a core to 100% utilization,
	  the call of ast_log() in such a tight loop eats all available
	  process memory.

	  Added poll with timeout to top of read loop

	  ASTERISK-26940 #close
	  Reported-by: Sandro Gauci

	  Change-Id: I2ce65f3c5cb24b4943a9f75b64d545a1e2cd2898

2017-04-13 17:16 +0000 [2bb98d8fac]  Mark Michelson <mmichelson@digium.com>

	* AST-2017-002: Ensure transaction key buffer is large enough.

	  ASTERISK-26938 #close

	  Change-Id: I266490792fd8896a23be7cb92f316b7e69356413

2017-05-18 16:35 +0000 [4141748e85]  Sean Bright <sean.bright@gmail.com>

	* res_hep_rtcp: Add support level to module info

	  Change-Id: I5661478f9cf12d431f730e42be79323b62831e92

2017-05-15 13:26 +0000 [a60d1f3974]  Kevin Harwell <kharwell@digium.com>

	* app_stream_echo: Added a multi-stream echo application

	  If the channel does not have multi-stream support then this application acts
	  just like app_echo. If it does have multi-stream support then each stream is
	  echoed back to itself (one-to-one).

	  If a "num" is specified, then a new topology is made that contains clones (from
	  the channel's topology) of all media types that are not equal to the given
	  "type". If the media type differs then the first stream matching the "type" is
	  cloned into the new topology and then up to "num" - 1 of the same stream are
	  also cloned into it. Any additional streams from the original topology matching
	  the "type" are subsequently ignored (i.e. not added to the new topology).

	  For this same case when a frame is read from a stream that frame is still
	  echoed back like before, but now that frame is also echoed out to the
	  additional streams that matched on the specified "type".

	  ASTERISK-26997 #close

	  Change-Id: I254144486734178e196c7f590a26ffc13543ff2c

2017-05-15 13:25 +0000 [51375686f7]  Kevin Harwell <kharwell@digium.com>

	* core/conversions: Added string to unsigned integer and long conversions

	  Added functions that convert a string to an unsigned integer or unsigned long.
	  A couple of unit test were also created to test the routines. The reasons for
	  adding these conversion utilities (and hopefully eventually more) are as
	  follows:

	    * Conversion routines are functionally contained with consistent and
	      better error checking
	    * The function names offer a better description of what is happening
	    * It encourages code reuse for easier bug fixing at a single source
	    * It's simpler to use
	    * It's unit testable

	  For instance, currently in a lot of places when converting to an integer or
	  similar the "sscanf" function is used. When using "sscanf" it may not be
	  immediately clear what's happening as it lacks semantic naming. Limited error
	  checking is usually done as well. For example, most of the time a check is done
	  to make sure the value converted, but does not check for overflows or negative
	  valued conversions when converting unsigned numbers.

	  Why use/wrap "strtoul" and not "sscanf" then? Primarily, it lacks some of the
	  built in error handling that "strtoul" has. For instance "strtoul" contains
	  overflow checks. Less so, but can still factor as reasons, "sscanf" is slightly
	  more complex in its use. And maybe a bit controversial, but it may be ("big if")
	  potentially slower than "strtoul" in some cases.

	  Change-Id: If7eaca4a48f8c7b89cc8b5a1f4bed2852fca82bb

2017-05-13 11:40 +0000 [5a7af00e80]  Joshua Colp <jcolp@digium.com>

	* asterisk: Audit locking of channel when manipulating flags.

	  When manipulating flags on a channel the channel has to be
	  locked to guarantee that nothing else is also manipulating
	  the flags. This change introduces locking where necessary to
	  guarantee this. It also adds helper functions that manipulate
	  channel flags and lock to reduce repeated code.

	  ASTERISK-26789

	  Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10

2017-05-12 21:04 +0000 [30fbed65f1]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Process initial INVITE sooner. (key exists)

	  Retransmissions of an initial INVITE could be queued in the serializer
	  before we have processed the first INVITE message.  If the first INVITE
	  message doesn't get completely processed before the retransmissions are
	  seen then we could try to setup the same call from the retransmissions.  A
	  symptom of this is seeing a (key exists) message associated with an
	  INVITE.  An earlier change attempted to address this kind of problem by
	  calculating a distributor serializer to use for unassociated messages.
	  Part of that change also made incoming calls keep using that distributor
	  serializer.  (ASTERISK-26088) However, some leftover code was still
	  deferring the INVITE processing to the session's serializer even though we
	  were already in that serializer.  This not only is unnecessary but would
	  cause the same call resetup problem.

	  * Removed the code to defer processing the initial INVITE to the session's
	  serializer because we are already running in that serializer.

	  ASTERISK-26998 #close

	  Change-Id: I1e822d82dcc650e508bc2d40d545d5de4f3421f6

2017-05-14 00:37 +0000 [6e7b78414f]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* Fix spelling queues.conf.sample file

	  Change-Id: Ie1c2d83af66f27a449da09a68d987e0992627fee

2017-05-08 13:40 +0000 [93b7f84c1a]  Vitezslav Novy <a1@vnovy.net>

	* chan_sip: Change sip_get_codec() to return correct codec list

	  Return cahnnel nativeformats to fix bridge technology selection process.
	  Same approach as in pjsip module.

	  ASTERISK-26143
	  Reported-by: Henning Holtschneider

	  Change-Id: I64e863753954d6ad67a9e722df2ebc328705ad48

2017-05-08 15:56 +0000 [808f299808]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: New endpoint option "refer_blind_progress"

	  This option was added to turn off notifying the progress details
	  on Blind Transfer. If this option is not set then the chan_pjsip
	  will send NOTIFY "200 OK" immediately after "202 Accepted".

	  Some SIP phones like Mitel/Aastra or Snom keep the line busy until
	  receive "200 OK".

	  ASTERISK-26333 #close

	  Change-Id: Id606fbff2e02e967c02138457badc399144720f2

2017-05-11 00:25 +0000 [045dbcc2d6]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* app_queue: Fix duplicate queue_log entries for EXITEMPTY and ABANDON

	  There are 2 places in app_queue.c that log EXITEMPTY event: one in
	  wait_our_turn, and another one in queue_exec in the loop trying to
	  call an agent after wait_our_turn.

	  In most cases it leads to logging EXITEMPTY twice.

	  ABANDON is also logged on two places, and in the rare case when an agent
	  and caller hang up simultaneously it's also possible to get duplicates
	  in queue_log.

	  This commit changes wait_our_turn to return -1 ("the caller should exit
	  the queue") instead of 0 ("the caller's turn has arrived") in case of
	  leaving when empty, so queue_exec skips the agent calling loop.

	  Also, leave_queue is now executed only once in this case, because 2nd
	  time is just a noop when the queue entry has already been removed.

	  Also, it sets qe->handled to -1 to indicate that the call was not
	  answered by an agent, but the necessary handling has already been done
	  in order to avoid logging an extra ABANDON entry.

	  ASTERISK-25665 #close
	  Reported by: Ove Aursand

	  Change-Id: I4578dd383bf2ac41589cf167865e8aaebcd4c11e

2017-04-27 19:37 +0000 [b8659be9b0]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Make process possible multiple fmtp attributes per rtpmap.

	  Change-Id: Ie7511008d82b59590e0eb520a21b5e1da4bd7349

2017-04-28 11:53 +0000 [c2906dfa05]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Remove sdp_state.remote_capabilities

	  The sdp_state.remote_capabilities was only used inside merge_sdps() and
	  subsequent calls to merge_sdps() by re-INVITE's would leak them.

	  Change-Id: I0ceb7838ea044cc913e8ad4a255c39c9740ae0ce

2017-05-05 14:30 +0000 [16785c0908]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Add interface_address to specify our address to use.

	  When we optionally set the interface_address we are forcing the media to
	  go out a specific interface address.  This allows us to optionally have
	  the media go out the interface that SIP signalling came in on or if we are
	  configured to have the media always go out a specific address.

	  Change-Id: I160d9fac322a075bd2557b430632544178196189

2017-05-05 14:49 +0000 [367042bd3e]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Explicitly stop a RTP instance before destoying it.

	  * Made sdp_add_m_from_rtp_stream() and sdp_add_m_from_udptl_stream()
	  handle generating disabled/declined streams.

	  * Added /main/sdp/sdp_merge_asymmetric unit test.  It currently does not
	  check the offerer side negotiated SDP because that isn't the purpose of
	  this patch and there is much to be done to handle declined/dummy streams.

	  * Added T.38 image streams to the /main/sdp/sdp_merge_symmetric and
	  /main/sdp/sdp_merge_crisscross unit tests.

	  Change-Id: Ib4dcb3ca4f9a9133b376f4e3302f9a1f963f2b31

2017-04-28 19:48 +0000 [be5809fac8]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Rework merge_capabilities().

	  * Tried to give better variable names.
	  * Made our SDP answer use the offer's RTP payload types as the SDP RFC
	  says we SHOULD.
	  * Updating the local topology now takes the stream format caps.  We are
	  likely preparing to send an offer.

	  Change-Id: I34d3be8e3036402a8575ffcae3eebc5ce348d7c0

2017-04-28 12:30 +0000 [ae7689f093]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Update ast_get_topology_from_sdp() to keep RTP map.

	  * Add failure exits to ast_get_topology_from_sdp().

	  Change-Id: I4cc85c1ede8d712766ed20f544dbcef04c8c1049

2017-05-09 10:34 +0000 [cbbd119c21]  Joshua Colp <jcolp@digium.com>

	* tcptls: Improve error messages for TLS connections.

	  This change uses the functions provided by OpenSSL to query
	  and better construct error messages for situations where
	  the connection encounters a problem.

	  ASTERISK-26606

	  Change-Id: I7ae40ce88c0dc4e185c4df1ceb3a6ccc198f075b

2017-05-04 17:28 +0000 [10a4439ac9]  Joshua Elson <joshelson@gmail.com>

	* Prevent Undefined Capath Crash

	  It is possible to initialize a valid config without a capath
	  or cafile definition. This will cause a crash on a reload.

	  This fix ensures capath is always allocated.

	  ASTERISK-26983 #close

	  Change-Id: I63ff715d9d9023427543a5b8a4ba7b0d82533c12

2017-05-05 11:33 +0000 [1a1c86239d]  George Joseph <gjoseph@digium.com>

	* cel_odbc:  Fix timestamp processing for microseconds

	  When a column is of type timestamp, the fraction part of the event
	  field's seconds was frequently parsed incorrectly especially if
	  there were leading zeros.  For instance "2017-05-23 23:55:03.023"
	  would be parsed into an int as "23" then when the timestamp was
	  formatted again to be inserted into the database column it'd be
	  "2017-05-23 23:55:03.23" which is now 230 milliseconds instead of
	  23 milliseconds.  "03.000001" would be transformed to "03.1", etc.

	  * If the event field is 'eventtime' and the db column is timestamp,
	    then existing processing has already correctly formatted the
	    timestamp so now we simply use it rather than parsing it and
	    re-printing it. This is the most common use case anyway.

	  * If the event field is other than 'eventtime' and the db column
	    is timestamp, we now parse the seconds, including the fractional
	    part into a double rather than 2 ints.  This preserves the
	    magnitude and precision of the fractional part.  When we print
	    it, we now print it as a "%09.6lf" which correctly represents the
	    input.

	  To be honest, why we parse the string timestamp into components,
	  test the components, then print the components back into a string
	  timestamp is beyond me.  We should use parse it, test it, then if
	  it passes, use the original string representation in the database
	  call.  Maybe someone thought that some implementations wouldn't
	  take a partial timestamp string like "2017-05-06" and decided to
	  always produce a full timestamp string even if an abbreviated one
	  was supplied.  Anyway, I'm leaving it as it is.

	  ASTERISK-25032 #close
	  Reported-by: Etienne Lessard

	  Change-Id: Id407e6221f79a5c1120e1a70bc7e893bbcaf1938

2017-05-09 05:25 +0000 [3c36c29c81]  Joshua Colp <jcolp@digium.com>

	* res_hep_rtcp: Provide chan_sip Call-ID for RTCP messages.

	  This change adds the required logic to allow the SIP
	  Call-ID to be placed into the HEP RTCP traffic if the
	  chan_sip module is used. In cases where the option is
	  enabled but the channel is not either SIP or PJSIP then
	  the code will fallback to the channel name as done
	  previously.

	  Based on the change on Nir's branch at:
	  team/nirs/hep-chan-sip-support

	  ASTERISK-26427

	  Change-Id: I09ffa5f6e2fdfd99ee999650ba4e0a7aad6dc40d

2017-05-08 16:11 +0000 [201346fb7d]  George Joseph <gjoseph@digium.com>

	* logger:  Added logger_queue_limit to the configuration options.

	  All log messages go to a queue serviced by a single thread
	  which does all the IO.  This setting controls how big that
	  queue can get (and therefore how much memory is allocated)
	  before new messages are discarded. The default is 1000.
	  Should something go bezerk and log tons of messages in a tight
	  loop, this will prevent memory escalation.

	  When the limit is reached, a WARNING is logged to that effect
	  and messages are discarded until the queue is empty again.  At
	  that time another WARNING will be logged with the count of
	  discarded messages.  There's no "low water mark" for this queue
	  because the logger thread empties the entire queue and processes it
	  in 1 batch before going back and waiting on the queue again.
	  Implementing a low water mark would mean additional locking as
	  the thread processes each message and it's not worth it.

	  A "test" was added to test_logger.c but since the outcome is
	  non-deterministic, it's really just a cli command, not a unit
	  test.

	  Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1

2017-05-02 18:05 +0000 [56c5c51076]  Richard Mudgett <rmudgett@digium.com>

	* stream: ast_stream_clone() cannot copy the opaque user data.

	  ast_stream_clone() cannot copy the opaque user data stored on a stream.
	  We don't know how to clone the data so it isn't copied into the clone.

	  Change-Id: Ia51321bf38ecbfdcc53787ca77ea5fd2cabdf367

2017-05-04 17:32 +0000 [924628812b]  Richard Mudgett <rmudgett@digium.com>

	* netsock2.c: Made get/set addr port avoid potential uninitialized memory.

	  Change-Id: I532052bd7cd95a4b3565485fc01e2a1ea07ee647

2017-05-05 08:48 +0000 [4146facfec]  Joshua Colp <jcolp@digium.com>

	* func_cdr: Allow empty value for CDR dialplan function.

	  A regression was introduced in 12 where passing an empty value
	  to the CDR dialplan function was not longer allowed. This
	  change returns to the behavior of 11 where it is permitted.

	  ASTERISK-26173

	  Change-Id: I3f148203b54ec088007e29e30005a5de122e51c5

2017-05-04 16:04 +0000 [0001834157]  George Joseph <gjoseph@digium.com>

	* app_confbridge:  Fix reference to cfg in menu_template_handler

	  menu_template_handler wasn't properly accounting for the fact that
	  it might be called both during a load/reload (which isn't really
	  valid but not prevented) and by a dialplan function.  In both cases
	  it was attempting to use the "pending" config which wasn't valid in
	  the latter case.  aco_process_config is also partly to blame because
	  it wasn't properly cleaning "pending" up when a reload was done and
	  no changes were made.  Both of these contributed to a crash if
	  CONFBRIDGE(menu,template) was called in a dialplan after a reload.

	  * aco_process_config now sets info->internal->pending to NULL
	    after it unrefs it although this isn't strictly necessary in the
	    context of this fix.
	  * menu_template_handler now uses the "current" config and silently
	    ignores any attempt to be called as a result of someone uses the
	    "template" parameter in the conf file.

	  Luckily there's no other place in the codebase where
	  aco_pending_config is used outside of aco_process_config.

	  ASTERISK-25506 #close
	  Reported-by: Frederic LE FOLL

	  Change-Id: Ib349a17d3d088f092480b19addd7122fcaac21a7

2017-04-30 16:40 +0000 [c90d81ef51]  Joshua Colp <jcolp@digium.com>

	* bridge: Fix returning to dialplan when executing Bridge() from AMI.

	  When using the Bridge AMI action on the same channel multiple times
	  it was possible for the channel to return to the wrong location in
	  the dialplan if the other party hung up. This happened because the
	  priority of the channel was not preserved across each action
	  invocation and it would fail to move on to the next priority in
	  other cases.

	  This change makes it so that the priority of a channel is preserved
	  when taking control of it from another thread and it is incremented
	  as appropriate such that the priority reflects where the channel
	  should next be executed in the dialplan, not where it may or may not
	  currently be.

	  The Bridge AMI action was also changed to ensure that it too
	  starts the channels at the next location in the dialplan.

	  ASTERISK-24529

	  Change-Id: I52406669cf64208aef7252a65b63ade31fbf7a5a

2017-04-25 11:49 +0000 [7b0e3b92fd]  Kevin Harwell <kharwell@digium.com>

	* bridge_simple: Added support for streams

	  This patch is the first cut at adding stream support to the bridging framework.
	  Changes were made to the framework that allows mapping of stream topologies to
	  a bridge's supported media types.

	  The first channel to enter a bridge initially defines the media types for a
	  bridge (i.e. a one to one mapping is created between the bridge and the first
	  channel). Subsequently added channels merge their media types into the bridge's
	  adding to it when necessary. This allows channels with different sized
	  topologies to map correctly to each other according to media type. The bridge
	  drops any frame that does not have a matching index into a given write stream.

	  For now though, bridge_simple will align its two channels according to size or
	  first to join. Once both channels join the bridge the one with the most streams
	  will indicate to the other channel to update its streams to be the same as that
	  of the other. If both channels have the same number of streams then the first
	  channel to join is chosen as the stream base.

	  A topology change source was also added to a channel when a stream toplogy
	  change request is made. This allows subsystems to know whether or not they
	  initiated a change request. Thus avoiding potential recursive situations.

	  ASTERISK-26966 #close

	  Change-Id: I1eb5987921dd80c3cdcf52accc136393ca2d4163

2017-05-01 13:04 +0000 [008e25def9]  Kevin Harwell <kharwell@digium.com>

	* res_rtp_asterisk: Clearing the remote RTCP address causes RTCP failures

	  When a call gets put on hold RTP is temporarily stopped and Asterisk was
	  setting the remote RTCP address to NULL. Then when RTCP data was received
	  from the remote endpoint, Asterisk would be missing this information when
	  publishing the rtcp_message stasis event. Consequently, message subscribers
	  (in this case res_hep_rtcp) trying to parse the "from" field output the
	  following error:

	  "ast_sockaddr_split_hostport: Port missing in (null)"

	  This patch makes it so the remote RTCP address is no longer set to NULL when
	  stopping RTP. There was only one place that appeared to check if the remote
	  RTCP address was NULL as a way to tell if RTCP was running. This patch added
	  an additional check on the RTCP schedid for that case to make sure RTCP was
	  truly not running.

	  ASTERISK-26860 #close

	  Change-Id: I6be200fb20db647e48b5138ea4b81dfa7962974b

2017-05-02 11:34 +0000 [675e058e77]  Sean Bright <sean.bright@gmail.com>

	* cleanup: Change severity of fread short-read warning

	  Many sound files don't have a full frame's worth of data at EOF, so the
	  warning messages were a bit too noisy. So we demote them to debug
	  messages.

	  Change-Id: I6b617467d687658adca39170a81797a11cc766f6

2017-04-26 16:22 +0000 [cd272da7a8]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Replace SDP telephone_event option with dtmf option

	  The telephone_event option was used as a flag and a bit mapped value in
	  different places when it is a boolean.  It is also inadequate to configure
	  the DTMF operation of the RTP instance created for the stream.

	  Change-Id: Ib1addeaf0ce86f07039f2f979cab29405dc5239b

2017-04-29 16:11 +0000 [52e4f02b1a]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_t38.c: Fix deadlock in T.38 framehook.

	  A deadlock can happen between a channel lock and a pjsip session media
	  container lock.  One thread is processing a reINVITE's SDP and walking
	  through the session's media container when it waits for the channel lock
	  to put the determined format capabilities onto the channel.  The other
	  thread is writing a frame to the channel and processing the T.38 frame
	  hook.  The T.38 frame hook then waits for the pjsip session's media
	  container lock.  The two threads are now deadlocked.

	  * Made the T.38 frame hook release the channel lock before searching the
	  session's media container.  This fix has been done to several other
	  frame hooks to fix deadlocks.

	  ASTERISK-26974 #close

	  Change-Id: Ie984a76ce00bef6ec9aa239010e51e8dd74c8186

2017-04-28 10:56 +0000 [8170793be6]  George Joseph <gjoseph@digium.com>

	* res_pjsip_outbound_authenticator_digest: Add context to log messages

	  There was no context info in this module's log messages so it was
	  impossible to toubleshoot.

	  Added endpoint or host to all messages and added the realms in the
	  challenge for the "No auth credentials for any realm" message.

	  Change-Id: Ifeed2786f35fbea7d141237ae15625e472acff9b

2017-04-27 16:46 +0000 [48566b8c66]  Richard Mudgett <rmudgett@digium.com>

	* res_sdp_translator_pjmedia.c: Add TODO notes.

	  Change-Id: If27ca61f79accc882c3376d2e876d2b44aa1347b

2017-04-24 18:13 +0000 [ede90e4aa5]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Make SDP translation to/from internal representation more const.

	  Change-Id: I473a174b869728604b37c60853896b0c458bc504

2017-04-20 19:25 +0000 [5c1851cbc0]  Richard Mudgett <rmudgett@digium.com>

	* stream: Make ast_stream_topology_create_from_format_cap() allow NULL cap.

	  Change-Id: Ie29760c49c25d7022ba2124698283181a0dd5d08

2017-04-24 16:55 +0000 [d71c6e3bfd]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Make ast_sdp_state_set_remote_sdp() return error.

	  Change-Id: I7707c9d872c476d897ff459008652b35142a35e1

2017-04-14 11:52 +0000 [176123e76c]  Richard Mudgett <rmudgett@digium.com>

	* SDP: Misc cleanups (Mostly memory leaks)

	  Change-Id: I74431b385da333f2c5f5a6d7c55e70b69a4f05d2

2017-04-27 18:15 +0000 [bad091b317]  Richard Mudgett <rmudgett@digium.com>

	* chan_vpb.cc: Fix compile error.

	  Change-Id: I6d9edd34d8b2474222c86f44e379ead61e57a54f

2017-04-26 16:14 +0000 [d6535c0080]  Mark Michelson <mmichelson@digium.com>

	* SDP API: Add SSRC-level attributes

	  RFC 5576 defines how SSRC-level attributes may be added to SDP media
	  descriptions. In general, this is useful for grouping related SSRCes,
	  indicating SSRC-level format attributes, and resolving collisions in RTP
	  SSRC values. These attributes are used widely by browsers during WebRTC
	  communications, including attributes defined by documents outside of RFC
	  5576.

	  This commit introduces the addition of SSRC-level attributes into SDPs
	  generated by Asterisk. Since Asterisk does not tend to use multiple
	  SSRCs on a media stream, the initial support is minimal. Asterisk
	  includes an SSRC-level CNAME attribute if configured to do so. This at
	  least gives browsers (and possibly others) the ability to resolve SSRC
	  collisions at offer-answer time.

	  In order to facilitate this, the RTP engine API has been enhanced to be
	  able to retrieve the SSRC and CNAME on a given RTP instance.

	  res_rtp_asterisk currently does not provide meaningful CNAME values in
	  its RTCP SDES items, and therefore it currently will always return an
	  empty string as the CNAME value. A task in the near future will result
	  in res_rtp_asterisk generating more meaningful CNAMEs.

	  Change-Id: I29e7f23e7db77524f82a3b6e8531b1195ff57789

2017-04-27 08:02 +0000 [d6b2a58736]  George Joseph <gjoseph@digium.com>

	* res_pjsip_session:  Add cleanup to ast_sip_session_terminate

	  If you use ast_request to create a PJSIP channel but then hang it
	  up without causing a transaction to be sent, the session will
	  never be destroyed.  This is due ot the fact that it's pjproject
	  that triggers the session cleanup when the transaction ends.
	  app_chanisavail was doing this to get more granular channel state
	  and it's also possible for this to happen via ARI.

	  * ast_sip_session_terminate was modified to explicitly call the
	    cleanup tasks and unreference session if the invite state is NULL
	    AND invite_tsx is NULL (meaning we never sent a transaction).

	  * chan_pjsip/hangup was modified to bump session before it calls
	    ast_sip_session_terminate to insure that session stays valid
	    while it does its own cleanup.

	  * Added test events to session_destructor for a future testsuite
	    test.

	  ASTERISK-26908 #close
	  Reported-by: Richard Mudgett

	  Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9

2017-04-24 10:59 +0000 [2b22c3c84b]  Joshua Colp <jcolp@digium.com>

	* channel: Add ability to request an outgoing channel with stream topology.

	  This change extends the ast_request functionality by adding another
	  function and callback to create an outgoing channel with a requested
	  stream topology. Fallback is provided by either converting the
	  requested stream topology into a format capabilities structure if
	  the channel driver does not support streams or by converting the
	  requested format capabilities into a stream topology if the channel
	  driver does support streams.

	  The Dial application has also been updated to request an outgoing
	  channel with the stream topology of the calling channel.

	  ASTERISK-26959

	  Change-Id: Ifa9037a672ac21d42dd7125aa09816dc879a70e6

2017-04-26 14:20 +0000 [c6b757fa05]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip/res_pjsip_callerid: NULL check on caller id name string

	  It's possible for a name in a party id structure to be marked as valid, but the
	  name string itself be NULL (for instance this is possible to do by using the
	  dialplan CALLERID function). There were a couple of places where the name was
	  validated, but the string itself was not checked before passing it to functions
	  like 'strlen'. This of course caused a crashed.

	  This patch adds in a NULL check before attempting to pass it into a function
	  that is not NULL tolerant.

	  ASTERISK-25823 #close

	  Change-Id: Iaa6ffe9d92f598fe9e3c8ae373fadbe3dfbf1d4a

2017-04-25 11:43 +0000 [cf3429b934]  Kevin Harwell <kharwell@digium.com>

	* vector: defaults and indexes

	  Added an pre-defined integer vector declaration. This makes integer vectors
	  easier to declare and pass around. Also, added the ability to default a vector
	  up to a given size with a default value. Lastly, added functionality that
	  returns the "nth" index of a matching value.

	  Also, updated a unit test to test these changes.

	  Change-Id: Iaf4b51b2540eda57cb43f67aa59cf1d96cdbcaa5

2017-04-26 05:38 +0000 [985a5fd7aa]  Joshua Colp <jcolp@digium.com>

	* frame: Better handle interpolated frames.

	  Interpolated frames are frames which contain a number of
	  samples but have no actual data. Audiohooks did not
	  handle this case when translating an incoming frame into
	  signed linear. It assumed that a frame would always contain
	  media when it may not. If this occurs audiohooks will now
	  immediately return and not act on the frame.

	  As well for users of ast_trans_frameout the function has
	  been changed to be a bit more sane and ensure that the data
	  pointer on a frame is set to NULL if no data is actually
	  on the frame. This allows the various spots in Asterisk that
	  check for an interpolated frame based on the presence of a
	  data pointer to work as expected.

	  ASTERISK-26926

	  Change-Id: I7fa22f631fa28d540722ed789ce28e84c7f8662b

2017-04-26 09:22 +0000 [99dea9ba84]  Yasin CANER <yasin.caner@netgsm.com.tr>

	* res_pjsip_session : fixed wrong From Header number On Re-invite

	  ASTERISK-26964 #close

	  Change-Id: I55a9caa7dc90e6c4c219cb09b5c2ec08af84a302

2017-04-26 08:45 +0000 [858ed60446]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Add --disable-libwebrtc to configure

	  Without the disable, pjproject tries to build it's internal
	  webrtc implementation which requires sse2.  This fails on
	  platforms without sse2.

	  ASTERISK-26930 #close
	  Reported-by: abelbeck

	  Change-Id: I07231f9160c35cfa42b194d3aad4e7d51fd9a410

2017-04-26 07:58 +0000 [585f9405b1]  Thierry Magnien <thierry.magnien@gmail.com>

	* channels/chan_sip.c: use binding IP address for outgoing TCP SIP connections

	  For outgoing TCP connections, Asterisk uses the first IP address of the
	  interface instead of the IP address we asked him to bind to.

	  ASTERISK-26922 #close
	  Reported-by: Ksenia

	  Change-Id: I43c71ca89211dbf1838e5bcdb9be8d06d98e54eb

2017-04-21 12:04 +0000 [f5b67871df]  Sean Bright <sean.bright@gmail.com>

	* cleanup: Fix fread() and fwrite() error handling

	  Cleaned up some of the incorrect uses of fread() and fwrite(), mostly in
	  the format modules. Neither of these functions will ever return a value
	  less than 0, which we were checking for in some cases.

	  I've introduced a fair amount of duplication in the format modules, but
	  I plan to change how format modules work internally in a subsequent
	  patch set, so this is simply a stop-gap.

	  Change-Id: I8ca1cd47c20b2c0b72088bd13b9046f6977aa872

2017-04-25 07:52 +0000 [199d4776c0]  Joshua Colp <jcolp@digium.com>

	* alembic: Add table for 'resource_list' PJSIP RLS type.

	  This change adds an Alembic migration which adds a
	  ps_resource_list table that can contain resource_list
	  RLS configuration objects.

	  ASTERISK-26929

	  Change-Id: I7c888fafc67b3e87012de974f71ca7a5b8b1ec05

2017-04-14 05:21 +0000 [19a79ae12c]  Joshua Colp <jcolp@digium.com>

	* sdp: Add support for T.38

	  This change adds a T.38 format which can be used in a stream
	  topology to specify that a UDPTL stream needs to be created.
	  The SDP API has been changed to understand T.38 and create
	  the UDPTL session, add the attributes, and parse the attributes.

	  This change does not change the boundary of the T.38 state
	  machine. It is still up to the channel driver to implement and
	  act on it (such as queueing control frames or reacting to them).

	  ASTERISK-26949

	  Change-Id: If28956762ccb8ead562ac6c03d162d3d6014f2c7

2017-03-21 15:44 +0000 [32b3e36c68]  Mark Michelson <mmichelson@digium.com>

	* SDP: Ensure SDPs "merge" properly.

	  The gist of this work ensures that when a remote SDP is received, it is
	  merged properly with the local capabilities. The remote SDP is converted
	  into a stream topology. That topology is then merged with the current
	  local topology on the SDP state. That new merged topology is then used
	  to create an SDP. Finally, adjustments are made to RTP instances based
	  on knowledge gained from the remote SDP.

	  There are also a battery of tests in this commit that ensure that some
	  basic SDP merges work as expected.

	  While this may not sound like a big change, it has the property that it
	  caused lots of ancillary changes.

	  * The remote SDP is no longer stored on the SDP state. Biggest reason:
	    there's no need for it. The remote SDP is used at the time it is being
	    set and nowhere else.

	  * Some new SDP APIs were added in order to find attributes and convert
	    generic SDP attributes into rtpmap structures.

	  * Writing tests made me realize that retrieving a value from an SDP
	    options structure, the SDP options needs to be made const.

	  * The SDP state machine was essentially gutted by a previous commit.
	    Initially, I attempted to reinstate it, but I found that as it had
	    been defined, it was not all that useful. What was more useful was
	    knowing the role we play in SDP negotiation, so the SDP state machine
	    has been transformed into an indicator of role.

	  * Rather than storing separate local and joint stream state
	    capabilities, it makes more sense to keep track of current stream
	    state and update it as things change.

	  Change-Id: I5938c2be3c6f0a003aa88a39a59e0880f8b2df3d

2017-04-24 13:16 +0000 [0611f2ca17]  Sean Bright <sean.bright@gmail.com>

	* res_hep: Add additional config initialization and validation

	  * Initialize hepv3_runtime_data.sockfd to -1 so that our ao2 destructor
	    does not close fd 0

	  * Add logging output when the required option - capture_address - is not
	    specified.

	  * Remove a no longer relevant #define and correct related documentation

	  * Pass appropriate flags to aco_option_register so that capture_address
	    cannot be the empty string.

	  ASTERISK-26953 #close

	  Change-Id: Ief08441bc6596d6f1718fa810e54a5048124f076

2017-04-17 19:06 +0000 [59203c51cc]  Sean Bright <sean.bright@gmail.com>

	* core: Use eventfd for alert pipes on Linux when possible

	  The primary win of switching to eventfd when possible is that it only
	  uses a single file descriptor while pipe() will use two. This means for
	  each bridge channel we're reducing the number of required file
	  descriptors by 1, and - if you're using timerfd - we also now have 1
	  less file descriptor per Asterisk channel.

	  The API is not ideal (passing int arrays), but this is the cleanest
	  approach I could come up with to maintain API/ABI.

	  I've also removed what I believe to be an erroneous code block that
	  checked the non-blocking flag on the pipe ends for each read. If the
	  file descriptor is 'losing' its non-blocking mode, it is because of a
	  bug somewhere else in our code.

	  In my testing I haven't seen any measurable difference in performance.

	  Change-Id: Iff0fb1573e7f7a187d5211ddc60aa8f3da3edb1d

2017-04-21 12:33 +0000 [f1d20c84a1]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Send 100 Trying out earlier to prevent retransmissions.

	  If ICE is enabled and a STUN server does not respond then we will block
	  until we give up on the STUN response.  This will take nine seconds.  In
	  the mean time the peer that sent the INVITE will send retransmissions.

	  * Restructure res_pjsip_session.c:new_invite() to send a 100 Trying out
	  earlier to prevent these retransmissions.

	  ASTERISK-26890

	  Change-Id: Ie3fc611e53a0eff6586ad55e4aacad81cf6319a8

2017-04-21 12:07 +0000 [835c209445]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Restructure ast_sip_session_alloc()

	  * Restructure ast_sip_session_alloc() to need less cleanup on off nominal
	  error paths.

	  * Made ast_sip_session_alloc() and ast_sip_session_create_outgoing() avoid
	  unnecessary ref manipulation to return a session.  This is faster than
	  calling a function.  That function may do logging of the ref changes with
	  REF_DEBUG enabled.

	  Change-Id: I2a0affc4be51013d3f0485782c96b8fee3ddb00a

2017-04-20 02:13 +0000 [b4b1943c5d]  Jean Aunis <jean.aunis@prescom.fr>

	* chan_sip: Trigger reinvite if the SDP answer is included in the SIP ACK

	  Some equipments may send a re-INVITE containing an SDP in the final ACK
	  request. If this happens in the context of direct media, the remote end
	  should be updated with a re-INVITE.
	  This patch queues an "update RTP peer" frame to trigger the re-INVITE,
	  instead of the "source change" frame wich was used previously.

	  ASTERISK-26951

	  Change-Id: I3644d2025f20e086ea9f8f62b486172c52b5b2e6

2017-04-19 15:08 +0000 [c47b3e74d2]  Sean Bright <sean.bright@gmail.com>

	* pbx: Use same thread if AST_OUTGOING_WAIT_COMPLETE specified

	  Both ast_pbx_outgoing_app() and ast_pbx_outgoing_exten() cause the core
	  to spawn a new thread to perform the dial. When AST_OUTGOING_WAIT_COMPLETE
	  is passed to these functions, the calling thread will be blocked until
	  the newly created channel has been hung up.

	  After this patch, we run the dial on the current thread rather than
	  spawning a new one. The only in-tree code that passes
	  AST_OUTGOING_WAIT_COMPLETE is pbx_spool, so you should see reduced
	  thread usage if you are using .call files.

	  Change-Id: I512735d243f0a9da2bcc128f7a96dece71f2d913

2017-04-19 13:23 +0000 [afad2ffd9f]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Fix crash in RTCP DTLS operation.

	  Occasionally a crash happens when processing the RTCP DTLS timeout
	  handler.  The RTCP DTLS timeout timer could be left running if we have not
	  completed the DTLS handshake before we place the call on hold or we
	  attempt direct media.

	  * Made ast_rtp_prop_set() stop the RTCP DTLS timer when disabling RTCP.

	  * Made some sanity tweaks to ast_rtp_prop_set() when switching from
	  standard RTCP mode to RTCP multiplexed mode.

	  ASTERISK-26692 #close

	  Change-Id: If6c64c79129961acfa4b3d63a864e8f6b664acc0

2017-03-22 16:05 +0000 [d165079cbc]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine/res_rtp_asterisk: Fix RTP struct reentrancy crashes.

	  The struct ast_rtp_instance has historically been indirectly protected
	  from reentrancy issues by the channel lock because early channel drivers
	  held the lock for really long times.  Holding the channel lock for such a
	  long time has caused many deadlock problems in the past.  Along comes
	  chan_pjsip/res_pjsip which doesn't necessarily hold the channel lock
	  because sometimes there may not be an associated channel created yet or
	  the channel pointer isn't available.

	  In the case of ASTERISK-26835 a pjsip serializer thread was processing a
	  message's SDP body while another thread was reading a RTP packet from the
	  socket.  Both threads wound up changing the rtp->rtcp->local_addr_str
	  string and interfering with each other.  The classic reentrancy problem
	  resulted in a crash.

	  In the case of ASTERISK-26853 a pjsip serializer thread was processing a
	  message's SDP body while another thread was reading a RTP packet from the
	  socket.  Both threads wound up processing ICE candidates in PJPROJECT and
	  interfering with each other.  The classic reentrancy problem resulted in a
	  crash.

	  * rtp_engine.c: Make the ast_rtp_instance_xxx() calls lock the RTP
	  instance struct.

	  * rtp_engine.c: Make ICE and DTLS wrapper functions to lock the RTP
	  instance struct for the API call.

	  * res_rtp_asterisk.c: Lock the RTP instance to prevent a reentrancy
	  problem with rtp->rtcp->local_addr_str in the scheduler thread running
	  ast_rtcp_write().

	  * res_rtp_asterisk.c: Avoid deadlock when local RTP bridging in
	  bridge_p2p_rtp_write() because there are two RTP instance structs
	  involved.

	  * res_rtp_asterisk.c: Avoid deadlock when trying to stop scheduler
	  callbacks.  We cannot hold the instance lock when trying to stop a
	  scheduler callback.

	  * res_rtp_asterisk.c: Remove the lock in struct dtls_details and use the
	  struct ast_rtp_instance ao2 object lock instead.  The lock was used to
	  synchronize two threads to prevent a race condition between starting and
	  stopping a timeout timer.  The race condition is no longer present between
	  dtls_perform_handshake() and __rtp_recvfrom() because the instance lock
	  prevents these functions from overlapping each other with regards to the
	  timeout timer.

	  * res_rtp_asterisk.c: Remove the lock in struct ast_rtp and use the struct
	  ast_rtp_instance ao2 object lock instead.  The lock was used to
	  synchronize two threads using a condition signal to know when TURN
	  negotiations complete.

	  * res_rtp_asterisk.c: Avoid deadlock when trying to stop the TURN
	  ioqueue_worker_thread().  We cannot hold the instance lock when trying to
	  create or shut down the worker thread without a risk of deadlock.

	  This patch exposed a race condition between a PJSIP serializer thread
	  setting up an ICE session in ice_create() and another thread reading RTP
	  packets.

	  * res_rtp_asterisk.c:ice_create(): Set the new rtp->ice pointer after we
	  have re-locked the RTP instance to prevent the other thread from trying to
	  process ICE packets on an incomplete ICE session setup.

	  A similar race condition is between a PJSIP serializer thread resetting up
	  an ICE session in ice_create() and the timer_worker_thread() processing
	  the completion of the previous ICE session.

	  * res_rtp_asterisk.c:ast_rtp_on_ice_complete(): Protect against an
	  uninitialized/null remote_address after calling
	  update_address_with_ice_candidate().

	  * res_rtp_asterisk.c: Eliminate the chance of ice_reset_session()
	  destroying and setting the rtp->ice pointer to NULL while other threads
	  are using it by adding an ao2 wrapper around the PJPROJECT ice pointer.
	  Now when we have to unlock the RTP instance object to call a PJPROJECT ICE
	  function we will hold a ref to the wrapper.  Also added some rtp->ice NULL
	  checks after we relock the RTP instance and have to do something with the
	  ICE structure.

	  ASTERISK-26835 #close
	  ASTERISK-26853 #close

	  Change-Id: I780b39ec935dcefcce880d50c1a7261744f1d1b4

2017-04-19 08:39 +0000 [b8b3380944]  Sean Bright <sean.bright@gmail.com>

	* build: Update config.guess and config.sub

	  Change-Id: Id078a1df07a771808775e1053cdfe1d99c8fb172

2017-04-14 13:52 +0000 [6c0ab9afa7]  Sean Bright <sean.bright@gmail.com>

	* format_wav: Read 16khz wav samples properly

	  When opening a PCM wave file for reading, we aren't tracking the
	  frequency of the opened file, so we treat 16khz files as 8khz and do
	  half reads.

	  This patch also cleans up some of the data types and an unnecessarily
	  complex `if` expression.

	  ASTERISK-26613 #close
	  Reported by: Vitaly K

	  Change-Id: I05f8b263058dc573ea8ffe0c62e7964506e11815

2017-04-16 19:59 +0000 [b55d21ad91]  George Joseph <gjoseph@digium.com>

	* make ari-stubs so doc periodic jobs can run

	  The periodic doc job does a make ari-stubs and checks that
	  there are no changes before generating the docs.  Since I changed
	  the mustache template (and the generated code directly) recently
	  and forgot to regenerate the stubs, the doc job thinks they're out
	  of date.

	  Change-Id: I94b97035311eccf52b0101b8590223265a7881d4

2017-04-14 12:51 +0000 [4fb9f5d60e]  Sean Bright <sean.bright@gmail.com>

	* format_ogg_vorbis: Clear ogg/vorbis data structures on close

	  On filestream close, we need to clear out the ogg & vorbis data
	  structures to prevent a memory leak.

	  ASTERISK-26169 #close
	  Reported by: Ivan Myalkin

	  Change-Id: Iee94c5a5d5bdafbf8b181c5c064d15d90ace8274

2017-04-14 17:32 +0000 [a3e623dd70]  Richard Mudgett <rmudgett@digium.com>

	* Revert "bridging:  Ensure successful T.38 negotation"

	  This reverts commit 7819f95791fe0ca0e0cdc417e2687a5900444053.

	  Change-Id: Ib91a7e6c9856f5f41329e42f40ba2394fee861a4

2017-04-14 16:50 +0000 [f6600f2c2e]  Sean Bright <sean.bright@gmail.com>

	* res_stun_monitor: Don't fail to load if DNS resolution fails

	  res_stun_monitor will fail to load if DNS resolution of the STUN server
	  fails. Instead, we continue without the STUN server being resolved and
	  we will re-attempt the resolution on the STUN refresh interval.

	  ASTERISK-21856 #close
	  Reported by: Jeremy Kister

	  Change-Id: I6334c54a1cc798f8a836b4b47948e0bb4ef59254

2017-04-14 14:36 +0000 [be71be7ed2]  Sean Bright <sean.bright@gmail.com>

	* format_pcm: Track actual header size of .au files

	  Sun's Au file format has a minimum data offset 24 bytes, but this
	  offset is encoded in each .au file. Instead of assuming the minimum,
	  read the actual value and store it for later use.

	  ASTERISK-20984 #close
	  Reported by: Roman S.
	  Patches:
	  	asterisk-1.8.20.0-au-clicks-2.diff (license #6474) patch
	  	uploaded by Roman S.

	  Change-Id: I524022fb19ff2fd5af2cc2d669d27a780ab2057c

2017-04-12 07:50 +0000 [2e6075c51f]  George Joseph <gjoseph@digium.com>

	* modules:  change module LOAD_FAILUREs to LOAD_DECLINES (master)

	  Change-Id: Iac40ecb20e10513d67bf0eaf61807f306067b258

2017-04-10 05:13 +0000 [72c5f3b0ba]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip_sdp_rtp: No rtpmap for static RTP payload IDs in SDP.

	  This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
	  SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
	  UDP, if many codecs are allowed in Asterisk. This new feature is enabled
	  together with the optional feature compact_headers=yes via the file pjsip.conf.

	  ASTERISK-26932 #close

	  Change-Id: Iaa556ab4c8325cd34c334387ab2847fab07b1689

2017-04-12 07:47 +0000 [6db0939b96]  George Joseph <gjoseph@digium.com>

	* modules:  change module LOAD_FAILUREs to LOAD_DECLINES (14)

	  Change-Id: If99e3b4fc2d7e86fc3e61182aa6c835b407ed49e

2017-04-11 11:07 +0000 [747beb1ed1]  George Joseph <gjoseph@digium.com>

	* modules:  change module LOAD_FAILUREs to LOAD_DECLINES

	  In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
	  to AST_MODULE_LOAD_DECLINE.  This prevents asterisk from exiting
	  if a module can't be loaded.  If the user wishes to retain the
	  FAILURE behavior for a specific module, they can use the "require"
	  or "preload-require" keyword in modules.conf.

	  A new API was added to logger: ast_is_logger_initialized().  This
	  allows asterisk.c/check_init() to print to the error log once the
	  logger subsystem is ready instead of just to stdout.  If something
	  does fail before the logger is initialized, we now print to stderr
	  instead of stdout.

	  Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25

2017-04-05 06:41 +0000 [7819f95791]  Torrey Searle <torrey@voxbone.com>

	* bridging:  Ensure successful T.38 negotation

	  When a T.38 happens immediatly after call establishment, the control
	  frame can be lost because the other leg is not yet in the bridge.

	  This patch detects this case an makes sure T.38 negotation happens
	  when the 2nd leg is being made compatible with the negotating
	  first leg

	  ASTERISK-26923 #close

	  Change-Id: If334125ee61ed63550d242fc9efe7987e37e1d94

2017-04-07 08:58 +0000 [7901225261]  Torrey Searle <torrey@voxbone.com>

	* strings.h:  Avoid overflows in the string hash functions

	  On 2's compliment machines abs(INT_MIN) behavior is undefined and
	  results in a negative value still being returnd.  This results in
	  negative hash codes that can result in crashes.

	  ASTERISK-26528 #close

	  Change-Id: Idff550145ca2133792a61a2e212b4a3e82c6517b

2017-04-07 16:14 +0000 [7312cbe803]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Add stun_blacklist option

	  Added the stun_blacklist option to rtp.conf.  Some multihomed servers have
	  IP interfaces that cannot reach the STUN server specified by stunaddr.
	  Blacklist those interface subnets from trying to send a STUN packet to
	  find the external IP address.  Attempting to send the STUN packet
	  needlessly delays processing incoming and outgoing SIP INVITEs because we
	  will wait for a response that can never come until we give up on the
	  response.  Multiple subnets may be listed.

	  ASTERISK-26890 #close

	  Change-Id: I3ff4f729e787f00c3e6e670fe6435acce38be342

2017-04-06 17:31 +0000 [7c37365f03]  Richard Mudgett <rmudgett@digium.com>

	* stun.c: Fix ast_stun_request() erratic timeout.

	  If ast_stun_request() receives packets other than a STUN response then we
	  could conceivably never exit if we continue to receive packets with less
	  than three seconds between them.

	  * Fix poll timeout to keep track of the time when we sent the STUN
	  request.  We will now send a STUN request every three seconds regardless
	  of how many other packets we receive while waiting for a response until we
	  have completed three STUN request transmission cycles.

	  Change-Id: Ib606cb08585e06eb50877f67b8d3bd385a85c266

2017-04-06 18:30 +0000 [8d323c74fa]  Richard Mudgett <rmudgett@digium.com>

	* sorcery.c: Speed up ast_sorcery_retrieve_by_id()

	  Return early if ast_sorcery_retrieve_by_id() is not passed an id to find.
	  Also eliminated the RAII_VAR() usage in the function.

	  Change-Id: I871dbe162a301b5ced8b4393cec27180c7c6b218

2017-04-10 11:30 +0000 [5b4e2ec267]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix pointer use after unref.

	  Change-Id: I4b6e1b0070563eeaee223cb58326f1b962ed5bc1

2017-04-06 18:18 +0000 [6f793ac149]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_sdp_rtp.c: Don't use deprecated transport struct member.

	  * create_rtp(): Eliminate use of deprecated transport struct member.  That
	  member and several others in the transport structure were deprecated
	  because of an infinite loop created when using realtime configuration.
	  See 2451d4e4550336197ee2e482750cc53f30afa352

	  ASTERISK-26851

	  Change-Id: I0533aa13c9ce3c6cc394e0fd2b5bf1cd1b2ef3bc

2017-04-10 17:45 +0000 [d76bc0565c]  Richard Mudgett <rmudgett@digium.com>

	* tcptls.c: Cleanup TCP/TLS listener thread on abnormal exit.

	  Temporarily running out of file descriptors should not terminate the
	  listener thread.  Otherwise, when there becomes more file descriptors
	  available, nothing is listening.

	  * Added EMFILE exception to abnormal thread exit.

	  * Added an abnormal TCP/TLS listener exit error message.

	  * Closed the TCP/TLS listener socket on abnormal exit so Asterisk does not
	  appear dead if something tries to connect to the socket.

	  ASTERISK-26903 #close

	  Change-Id: I10f2f784065136277f271159f0925927194581b5

2017-04-08 03:05 +0000 [2b8dbc9e00]  Walter Doekes <walter+github@wjd.nu>

	* samples: Undo removal of include from canonicalize-app-names commit.

	  This include was accidentally removed in changeset
	  Ia79aea64de89531362e993e34230c2044a70aa93. My bad.

	  Change-Id: I1d716c7f9590b4e97909fb8bca1f2ed9bd0e4082

2017-04-07 08:35 +0000 [270b485f04]  Joshua Colp <jcolp@digium.com>

	* pjsip: Add Alembic for PUBLISH support.

	  This change adds database tables for the PUBLISH support so it
	  can be configured using realtime. A minor fix to the
	  res_pjsip_publish_asterisk module was done so that it read the
	  sorcery configuration from the correct section. Finally the
	  sample configuration files have been updated.

	  ASTERISK-26928

	  Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952

2017-04-07 08:06 +0000 [7a46cd7433]  Alexander Traud <pabstraud@compuserve.com>

	* pjproject_bundled: Crash on pj_ssl_get_info() while ioqueue_on_read_complete().

	  When the Asterisk channel driver res_pjsip offers SIP-over-TLS, sometimes, not
	  reproducible, Asterisk crashed in pj_ssl_sock_get_info() because a NULL pointer
	  was read. This change avoids this crash.

	  ASTERISK-26927 #close

	  Change-Id: I24a6011b44d1426d159742ff4421cf806a52938b

2017-04-05 09:10 +0000 [e6ae3651b8]  Walter Doekes <walter+github@wjd.nu>

	* samples: Canonicalize app names in extensions.conf.sample.

	  This takes care of warnings by ossobv/asterisklint.

	  Change-Id: Ia79aea64de89531362e993e34230c2044a70aa93

2017-04-04 16:20 +0000 [01e9eaf3a6]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled: Add 3 upstream patches

	  0035-r5572-svn-backport-dialog-transaction-deadlock.patch
	  0036-r5573-svn-backport-ua-pjsua-transaction-deadlock.patch
	  0037-r5576-svn-backport-session-timer-crash.patch

	  Also removed the progress bar from wget download to stdout.

	  ASTERISK-26905 #close
	  Reported-by: Ross Beer

	  Change-Id: I268fb3cf71a3bb24283ff0d24bd8b03239d81256

2017-04-04 11:44 +0000 [fac5115c43]  Troy Bowman <troy@lump.net>

	* app_queue: Log reason for PAUSEALL/UNPAUSEALL

	  We needed the reason for our reporting when agents pause/unpause all of
	  their queues at once.  This is a small, simple patch that adds a reason
	  for PAUSEALL and UNPAUSEALL.  I have been using it in production for years.

	  ASTERISK-26920 #close

	  Change-Id: Ifb3f0d1a0abd5194253d9794023546e1395baf3d

2017-04-05 14:50 +0000 [40e9d5e8b7]  George Joseph <gjoseph@digium.com>

	* sample_config:  Add samples for pubsub to pjsip.conf.sample

	  Added:
	   * outbound-publish
	   * resource_list
	   * inbound-publication
	   * asterisk-publication

	  Change-Id: I65043a896c35483f30a92d30b5b118359af7ba5a

2017-04-03 15:38 +0000 [f2ee8ac21e]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_sdp_rtp.c: Don't alter global addr variable.

	  * create_rtp(): Fix unexpected alteration of global address_rtp if a
	  transport is bound to an address.

	  * create_rtp(): Fix use of uninitialized memory if the endpoint RTP media
	  address is invalid or the transport has an invalid address.

	  ASTERISK-26851

	  Change-Id: Icde42e65164a88913cb5c2601b285eebcff397b7

2017-03-27 09:03 +0000 [380973cc47]  Corey Farrell <git@cfware.com>

	* CDR: Protect from data overflow in ast_cdr_setuserfield.

	  ast_cdr_setuserfield wrote to a fixed length field using strcpy. This could
	  result in a buffer overrun when called from chan_sip or func_cdr. This patch
	  adds a maximum bytes written to the field by using ast_copy_string instead.

	  ASTERISK-26897 #close
	  patches:
	    0001-CDR-Protect-from-data-overflow-in-ast_cdr_setuserfie.patch submitted
	      by Corey Farrell (license #5909)

	  Change-Id: Ib23ca77e9b9e2803a450e1206af45df2d2fdf65c

2017-03-25 19:01 +0000 [6c3ae397cb]  Daniel Journo <dan@keshercommunications.com>

	* Unused realtime MOH classes not purged on 'moh reload'

	  Purge Realtime MOH classes on 'moh reload' even when musiconhold.conf
	  hasn't changed.

	  ASTERISK-25974 #close

	  Change-Id: I42c78ea76528473a656f204595956c9eedcf3246

2017-03-31 12:09 +0000 [8e36064109]  Corey Farrell <git@cfware.com>

	* core: Improve/simplify handling of required headers.

	  * Report failures if configure finds a required header is missing.
	  * Deduplicate includes between asterisk.h, astmm.h and compat.h.
	  * Unconditionally include headers in compat.h if required elsewhere.

	  Change-Id: Ie67d0185ca71fbfb81c9bdfaebe46a49e3c56dc5

2017-04-03 13:56 +0000 [a889621b14]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix transport ref leak.

	  We were leaking a transport ref in multihomed_on_rx_message() which
	  resulted in the FRACK about excessive ref counts.

	  ASTERISK-26916 #close

	  Change-Id: I7a96658a9614a060565bb9ad51cb1c9c11ee145f

2017-04-03 02:30 +0000 [4fc22c7673]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Session Timers required but refused wrongly.

	  SIP user-agents indicate which protocol extensions are allowed in headers
	  like Supported and Required. Such protocol extensions are Session Timers
	  (RFC 4028) for example. Session Timers are supported since Mantis-10665.
	  Since ASTERISK-21721, not only the first but multiple Supported/Required
	  headers in a message are parsed. In that change, an existing variable was
	  re-used within a newly added do-loop. Currently, at the end of that loop,
	  that variable is an empty string always. Previously, that variable was used
	  within log output. However, the log output was not changed.

	  ASTERISK-26915 #close

	  Change-Id: I09315f31b4d78fb214bb2a9fb6c0f5e143eae990

2017-03-31 16:31 +0000 [48be02c5d8]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Allow BYE to be sent on disconnected session.

	  It is perfectly acceptable for a BYE to be sent on a disconnected
	  session. This occurs when we respond to a challenge to the BYE
	  for authentication credentials.

	  ASTERISK-26363

	  Change-Id: I6ef0ddece812fea6665a1dd2549ef44fb9d90045

2017-03-31 13:14 +0000 [e8b1bb3041]  Richard Mudgett <rmudgett@digium.com>

	* chan_vpb.cc: Fix compiler error.

	  Added missing channel technology read/write stream callback
	  initialization.

	  Change-Id: I829043a327d987e0d964485dd3d27964bebbd623

2017-03-30 18:28 +0000 [f9695dc057]  Corey Farrell <git@cfware.com>

	* Forward declare 'struct ast_json' in asterisk.h

	  The ast_json structure is used in many Asterisk headers and is often the
	  only part of json.h used.  This adds a forward declaration to asterisk.h
	  and removes the include of json.h from many headers.  The declaration
	  has been left in endpoints.h and stasis.h to avoid problems with source
	  files that use ast_json functions without directly including json.h.

	  ari.h continues to include json.h as it uses enum
	  ast_json_encoding_format.

	  Change-Id: Id766aabce6bed56626d27e8d29f559b5e687b769

2017-03-30 08:11 +0000 [c537f99488]  Sean Bright <sean.bright@gmail.com>

	* cdr_pgsql: Fix buffer overflow calling libpq

	  Implement the same buffer size checking done in cel_pgsql.

	  ASTERISK-26896 #close
	  Reported by: twisted

	  Change-Id: Iaacfa1f1de7cb1e9414d121850d2d8c2888f3f48

2017-03-28 13:01 +0000 [a7d94f504f]  Walter Doekes <walter+github@wjd.nu>

	* build: Fix deb build issues with fakeroot

	  If DESTDIR is set, don't call ldconfig. Assume that DESTDIR is used to
	  create a binary archive. The ldconfig call should be delegated to the
	  archive postinst script. This fixes the case where fakeroot wraps 'make
	  install' causing $EUID to be 0 even though it doesn't have permission to
	  call ldconfig.

	  The previous logic in configure.ac to detect and correct libdir
	  has been removed as it was not completely accurate.  CentOS 64-bit
	  users should again specifiy --libdir=/usr/lib64 when configuring
	  to prevent install to /usr/lib.

	  Updated Makefile:check-old-libdir to check for orphans in
	  lib64 when installing to lib as well as orphans in lib when installing
	  to lib64.

	  Updated Makefile and main/Makefile uninstall targets to remove the
	  orphans using the new logic.

	  ASTERISK-26705

	  Change-Id: I51739d4a03e60bff38be719b8d2ead0007afdd51

2017-03-27 15:32 +0000 [f3290d6b66]  Joshua Colp <jcolp@digium.com>

	* sdp: Add support for setting connection address and clean up state.

	  This change cleans up state management for media streams by moving
	  RTP instances into their own session structure and adding additional
	  details that are not relevant to the core (such as connection address).
	  These can live either in the local capabilities or joint capabilities.

	  The ability to set explicit connection address information for
	  the purposes of direct media and NAT has also been added at the
	  global and stream specific level.

	  ASTERISK-26900

	  Change-Id: If7e5307239a9534420732de11c451a2705b6b681

2017-03-29 10:11 +0000 [5c1ea3ebbd]  Sean Bright <sean.bright@gmail.com>

	* astobj2: Prevent potential deadlocks with ao2_global_obj_release

	  The ao2_global_obj_release() function holds an exclusive lock on the
	  global object while it is being dereferenced. Any destructors that
	  run during this time that call ao2_global_obj_ref() will deadlock
	  because a read lock is required.

	  Instead, we make the global object inaccessible inside of the write
	  lock and only dereference it once we have released the lock. This
	  allows the affected destructors to fail gracefully.

	  While this doesn't completely solve the referenced issue (the error
	  message about not being able to create an IQ continues to be shown)
	  it does solve the backtrace spew that accompanied it.

	  ASTERISK-21009 #close
	  Reported by: Marcello Ceschia

	  Change-Id: Idf40ae136b5070dba22cb576ea8414fbc9939385

2017-03-30 10:18 +0000 [4e5cc70fb4]  Corey Farrell <git@cfware.com>

	* CEL: Remove header declarations of non-existant functions.

	  ast_cel_alloc and ast_cel_destroy do not exist in code, remove them from
	  the headers.

	  Change-Id: I99ce848e2e109e7d61771559f559b9e57973e45c

2017-03-27 11:49 +0000 [f66edcb8b0]  Josh Roberson <josh@asteriasgi.com>

	* cel_pgsql.c: Fix buffer overflow calling libpq

	  PQEscapeStringConn() expects the buffer passed in to be an
	  adequitely sized buffer to write out the escaped SQL value string
	  into.  It is possible, for large values (such as large values to
	  Dial with a lot of devices) to have more than our 512+1 byte
	  allocation and thus cause libpq to create a buffer overrun.

	  glibc will nicely ABRT asterisk for you, citing a stack smash.

	  Let's only allocate it to be as large as needed:
	  If we have a value, then (strlen(value) * 2) + 1 (as recommended
	  by libpq), and if we have none, just one byte to hold our null
	  will do.

	  ASTERISK-26896 #close

	  Change-Id: If611c734292618ed68dde17816d09dd16667dea2

2017-03-29 08:04 +0000 [e76cc51d5e]  Alexander Traud <pabstraud@compuserve.com>

	* srtp: Allow zero as tag value for a sRTP Crypto Suite.

	  ASTERISK-25490 #close

	  Change-Id: I1c5fc0942c33c96d62b24203aad0f1e1a1a0131f

2017-03-28 13:10 +0000 [2fe52174de]  George Joseph <gjoseph@digium.com>

	* res_pjsip_config_wizard: Add 2 new parameters to help with proxy config

	  Two new parameters have been added to the pjsip config wizard.

	   * Setting 'sends_line_with_registrations' to true will cause the wizard
	     to skip the creation of an identify object to match incoming request
	     to the endpoint and instead add the line and endpoint parameters to
	     the outbound registration object.

	   * Setting 'outbound_proxy' is a shortcut for adding individual
	     endpoint/outbound_proxy, aor/outbound_proxy and
	     registration/outbound_proxy parameters.

	  Change-Id: I678e5f80765734c056620528a6d40d82736ceeb0
	  (cherry picked from commit a827892ff77cd37912b528d9c45b446be091bbc0)
	  (cherry picked from commit 27344675be1941d30508c6e6bd684acdd0791e1a)

2017-03-28 09:29 +0000 [7c0b12dc41]  Sean Bright <sean.bright@gmail.com>

	* alembic: Turn off execute bit on non-executable python scripts

	  Change-Id: I744c986da4a38aeff8c00837eb89de7841fbc86c

2017-03-27 12:37 +0000 [3d8899bacf]  Richard Mudgett <rmudgett@digium.com>

	* Add DTLS sanity check.

	  Change-Id: Ib32612cf6c7ce9213a11b9cba82f630f8cd3564b

2017-03-08 07:24 +0000 [5d938045d4]  Joshua Colp <jcolp@digium.com>

	* channel: Remove old epoll support and fixed max number of file descriptors.

	  This change removes the old epoll support which has not been used or
	  maintained in quite some time.

	  The fixed number of file descriptors on a channel has also been removed.
	  File descriptors are now contained in a growable vector. This can be
	  used like before by specifying a specific position to store a file
	  descriptor at or using a new API call, ast_channel_fd_add, which adds
	  a file descriptor to the channel and returns its position.

	  Tests have been added which cover the growing behavior of the vector
	  and the new API call.

	  ASTERISK-26885

	  Change-Id: I1a754b506c009b83dfdeeb08c2d2815db30ef928

2017-03-27 09:35 +0000 [fd204d5c65]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Document the 'format' option

	  ASTERISK-26086 #close
	  Reported by: Jens Bürger

	  Change-Id: I6aab666c0bf01fd0c64d7a5bcb22fa7f5d41335e

2017-03-24 07:43 +0000 [cf6a6226ab]  Sean Bright <sean.bright@gmail.com>

	* core: Remove embedded module support

	  This has not worked for some time and is no longer actively maintained.

	  Change-Id: I5110b0db69c152761b58fa025cb0a53b0e544d99

2017-03-27 08:58 +0000 [d22c678999]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Don't chdir() when scanning MoH files

	  There doesn't appear to be any reason that we are chdir'ing in
	  moh_scan_files, and in the event of an Asterisk crash, the core files
	  may not get written because we have changed into a read-only directory.

	  ASTERISK-23996 #close
	  Reported by: Walter Doekes

	  Change-Id: Iac806dce01b3335963fbd62d4b4da9a65c614354

2017-03-23 09:48 +0000 [d5a8799c4b]  Sean Bright <sean.bright@gmail.com>

	* res_xmpp: Use incremental backoff when a read error occurs

	  If a read error occurs, we immediately attempt a reconnect without any
	  delay. Instead, let's sleep and backoff up to 60 seconds before we try
	  again.

	  ASTERISK-24712 #close
	  Reported by: Matthias Urlichs

	  Change-Id: I6fe10ef4734837727437beab715e336777f13f48

2017-03-24 11:29 +0000 [d08c69a9e2]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_sdp_rtp: Set hangup cause for RTP timeouts

	  chan_sip sets the hangup cause code to AST_CAUSE_REQUESTED_CHAN_UNAVAIL
	  (44) when a channel is hung up due to an RTP timeout. So do the same
	  when it happens with PJSIP for parity.

	  Change-Id: I3546ebbde6460c22a27c9da1bf321711b5961ab8

2017-03-23 14:01 +0000 [d2f2cdf476]  Kevin Harwell <kharwell@digium.com>

	* AMI: Updated version

	  Updated the AMI version for the following reason (see CHANGES for more details):

	  The 'PJSIPShowEndpoint' command's response event of 'IdentifyDetail' now
	  contains a new optional parameter, 'MatchHeader'.

	  Change-Id: Ie206913ef1dcfa6a2ebe3282da2387e52d6f05b9

2017-03-23 12:07 +0000 [12dde3b568]  Kevin Harwell <kharwell@digium.com>

	* pjproject_bundled: raise timeout value used when downloading

	  After configuring Asterisk with '--with-pjproject-bundled' the configure/build
	  process attempts to download pjproject from its download site. Currently, a
	  timeout of 10 seconds is used that will stop the download process if pjproject
	  has not been fully downloaded in that time. For some systems this was not enough
	  time and the process was timing out too early.

	  This patch raises the download timeout value to '60'. Also, this patch fixes
	  another bug where the DOWNLOAD_TIMEOUT variable was not being properly exported
	  due to a naming error. DOWNLOAD_MAX_TIMEOUT is now properly renamed to
	  DOWNLOAD_TIMEOUT.

	  ASTERISK-26814 #close

	  Change-Id: Ia56e4e8a3d39db76bc8a1852b2cf07ec10b39842

2017-03-22 20:33 +0000 [98a88e9ffa]  Sean Bright <sean.bright@gmail.com>

	* res_xmpp: Correct implementation of JABBER_STATUS & JabberStatus

	  The documentation for JABBER_STATUS (and the deprecated JabberStatus
	  app) indicate that a return value of 7 indicates that the specified
	  buddy was not in the roster. It also indicates that you can specify a
	  "bare" JID (one without a resource). Unfortunately the actual behavior
	  does not match the documented behavior.

	  Assuming that our roster includes the buddy online and available
	  "valid@example.org/Valid" and does *not* include the buddy
	  "invalid@example.org", the JABBER_STATUS() function returns the
	  following before this patch:

	  +------------------------------+------------+--------------------------+
	  | Buddy                        | Status     | Result                   |
	  +------------------------------+------------+--------------------------+
	  | valid@example.org            |  Online    |  7 (Not in roster)       |
	  | valid@example.org/Valid      |  Online    |  1 (Online)              |
	  | valid@example.org/Invalid    |  N/A       |  7 (Not in roster)       |
	  | invalid@example.org          |  N/A       |  Error logged, no return |
	  | invalid@example.org/Valid    |  N/A       |  Error logged, no return |
	  +------------------------------+------------+--------------------------+

	  And after this patch:

	  +------------------------------+------------+--------------------------+
	  | Buddy                        | Status     | Result                   |
	  +------------------------------+------------+--------------------------+
	  | valid@example.org            |  Online    |  1 (Online)              |
	  | valid@example.org/Valid      |  Online    |  1 (Online)              |
	  | valid@example.org/Invalid    |  N/A       |  6 (Offline)             |
	  | invalid@example.org          |  N/A       |  7 (Not in roster)       |
	  | invalid@example.org/Valid    |  N/A       |  7 (Not in roster)       |
	  +------------------------------+------------+--------------------------+

	  This brings the behavior in line with the documentation.

	  ASTERISK-23510 #close
	  Reported by: Anthony Critelli

	  Change-Id: I9c3241035363ef4a6bdc21fabfd8ffcd9ec657bf

2017-03-23 09:45 +0000 [be94105d6d]  Sean Bright <sean.bright@gmail.com>

	* res_xmpp: Try to provide useful errors messages from OpenSSL

	  If any errors occur during the TLS connection setup, we currently dump a
	  fairly generic error message. So instead we try to pull in something
	  useful from OpenSSL to report instead.

	  ASTERISK-24712
	  Reported by: Matthias Urlichs

	  Change-Id: I288500991a9681f447d92913b11fedaf426087f4

2017-03-23 05:19 +0000 [ee81ee1f14]  Sean Bright <sean.bright@gmail.com>

	* res_xmpp: Fix ref counting issue

	  The only remaining reference to the endpoint is in the endpoints
	  container, and because it is unlinked in ast_endpoint_shutdown, we don't
	  have to explicitly cleanup the endpoint ourselves.

	  Change-Id: I912a2692e52d3e2ed445b32d8ae3f9004bc2f2e8

2017-03-23 09:30 +0000 [9493981419]  Sean Bright <sean.bright@gmail.com>

	* res_xmpp: Correctly check return value of SSL_connect

	  SSL_connect returns non-zero for both success and some error conditions
	  so simply negating is inadequate.

	  Change-Id: Ifbf882896e598703b6c615407fa456d3199f95b1

2017-03-22 17:32 +0000 [7657c279b5]  Sean Bright <sean.bright@gmail.com>

	* res_xmpp: Don't crash when trying to send a message without a connection

	  If we never establish a connection to our Jabber server, iksemel never sets up
	  its internal transport pointer, so attempting to send a message dereferences a
	  NULL pointer and causes a crash.

	  ASTERISK-21855 #close
	  Reported by: Jeremy Kister

	  Change-Id: I204a568894e4a53ab929783ecc594a000f04d79c

2017-03-22 15:40 +0000 [0136ec12a3]  Sean Bright <sean.bright@gmail.com>

	* res_xmpp: Include client name in connection related error messages

	  ASTERISK-25622 #close
	  Reported by: Sean Darcy

	  Change-Id: I8472cb7bfb58d411a3cfbd482da98cae2d94d1e9

2017-03-20 13:27 +0000 [9b103e7bea]  Kevin Harwell <kharwell@digium.com>

	* rtp_engine: allocate RTP dynamic payloads per session

	  Dynamic payload types were statically defined in Asterisk. This unfortunately
	  limited the number of dynamic payloads that could be registered. With this patch
	  dynamic payload type numbers are now assigned dynamically and per RTP instance.
	  However, in order to limit any issues where some clients expect the old
	  statically defined value this patch makes it so the value Asterisk used to pre-
	  designate is used for the dynamic assignment if available.

	  An option, "rtp_use_dynamic", has also been added (can be set in asterisk.conf)
	  that turns the new dynamic behavior on or off. When off it reverts back to using
	  statically defined payload values. This option defaults to "yes" in Asterisk 15.

	  ASTERISK-26515 #close
	  patches:
	    ASTERISK-26515.diff submitted by jcolp (license 5000

	  Change-Id: I7653465c5ebeaf968f1a1cc8f3f4f5c4321da7fc

2017-03-21 12:32 +0000 [bb2936f3e4]  Sebastian Gutierrez <sgutierrez@integraccs.com>

	* cdr: Allow setting of user field from 'h' extension

	  The CDR code previously did not allow the user field to be set
	  from the 'h' extension in the dialplan. This change removes that
	  limitation and allows it to be set.

	  ASTERISK-26818

	  Change-Id: I0fed8a79b5e408bac4e30542b8f33a61c5ed9aa6

2017-03-14 16:45 +0000 [6b7697ed48]  Richard Begg <asterisk@meric.id.au>

	* res_pjsip_session: Enable RFC3578 overlap dialing support.

	  Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
	  destinations) as currently provided by chan_sip is missing from res_pjsip.
	  This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
	  which when set to yes enables 484 responses to partial destination
	  matches rather than the current 404.

	  ASTERISK-26864

	  Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6

2017-03-21 06:59 +0000 [d4fcf196a2]  Sean Bright <sean.bright@gmail.com>

	* res_hep: Capture actual transport type in use

	  Rather than hard-coding UDP, allow consumers of the HEP API to specify
	  which protocol is in use. Update the PJSIP provider to pass in the
	  current protocol type.

	  ASTERISK-26850 #close

	  Change-Id: I54bbb0a001cfe4c6a87ad4b6f2014af233349978

2017-03-21 09:57 +0000 [1bf839d44b]  Sean Bright <sean.bright@gmail.com>

	* Revert "app_queue: Handle the caller being redirected out of a queue bridge"

	  This reverts commit 163e9e53dc7d84dd42721e733b7706c8147bdd27.

	  Change-Id: Ief28479c77a298879dfe2c56be7ee92dc465da4b

2017-03-21 08:26 +0000 [6b4b87787c]  Sean Bright <sean.bright@gmail.com>

	* res_pjsip_messaging: Check URI type before dereferencing

	  We aren't validating that the URI we just parsed is a SIP/SIPS one before
	  trying to access the user, host, and port members of a possibly uninitialized
	  structure.

	  Also update the MessageSend documentation to indicate what 'from' formats are
	  accepted.

	  ASTERISK-26484 #close
	  Reported by: Vinod Dharashive

	  Change-Id: I476b5cc5f18a7713d0ee945374f2a1c164857d30

2017-03-13 15:21 +0000 [65ad554c98]  Joshua Elson <joshelson@gmail.com>

	* pjsip: prevent memory corruption on creation of xml bodies

	  ASTERISK-26776 #close

	  Change-Id: I884b6f4e8233a355d0be687ec78d41bc0e4d3fd2

2017-03-20 16:27 +0000 [fc794de756]  Sean Bright <sean.bright@gmail.com>

	* bridge_softmix: Ignore non-voice frames from translator

	  Some codecs - codec_speex specifically - take voice frames and return
	  other types of frames, like CNG. If we subsequently treat those as
	  voice frames, we'll run into trouble when destroying the frame because
	  of the requirement that each voice frame have an associated format.

	  ASTERISK-26880 #close
	  Reported by: Kirsty Tyerman

	  Change-Id: I43f8450c48fb276ad8b99db8512be82949c1ca7c

2017-03-14 23:49 +0000 [25016a74f8]  Aaron An <anjb@ti-net.com.cn>

	* audiohook.c: Lost RTP packets lead to out-of-sync MixMonitor.

	  Fixed a bug in function "ast_audiohook_write_frame" that checked the
	  variable other_factory_samples and only flushed the factories, so they
	  would be in sync, when other_factory_samples > 0. When there is not any
	  rtp incoming the variable other_factory_samples will be 0, and although
	  the result of "our_factory_ms - other_factory_ms" may be very large,
	  this led to the record file not syncing.

	  ASTERISK-26875 #close
	  Reported-by: Aaron An
	  Tested-by: Aaron An

	  Change-Id: Ia4d890fb8fc1636a7188502bab35f555685aea22

2017-03-18 12:30 +0000 [fc71c18a9b]  Sean Bright <sean.bright@gmail.com>

	* thread safety: Don't use getprotobyname()

	  POSIX does not require getprotobyname() to be thread safe and some
	  implementations use static memory which causes issues when multiple
	  threads are used.

	  Further, our usage of it today is just to ultimately get IPPROTO_TCP
	  for calls to setsockopt(). So instead we just use IPPROTO_TCP directly.

	  Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48

2017-03-19 13:26 +0000 [516e028b44]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk: Pass correct data length to ast_rtcp_interpret

	  We are currently passing in the capacity of the read buffer instead of the
	  number of bytes that we actually read off the wire.

	  Change-Id: I60465049727d955c7f9a5e529e6f2aaff04cda36

2017-03-14 09:27 +0000 [79069f8ccb]  Robert Mordec <r.mordec@slican.pl>

	* app_queue: Member stuck as pending after forwarding previous call from queue

	  Queue member will get stuck in pending_members if queue calls a device
	  that is different from the one observed for state changes.

	  This patch removes members from pending_members as a result of channel stasis
	  events such as blind or attended transfers and hangup.

	  ASTERISK-26862 #close

	  Change-Id: I8bf6df487b9bb35726c08049ff25cdad5e357727

2017-02-22 23:26 +0000 [8cb4f9cea1]  Richard Mudgett <rmudgett@digium.com>

	* CHANNEL(callid): Give dialplan access to the callid.

	  * Added CHANNEL(callid) to retrieve the call identifier log tag associated
	  with the channel.  Dialplan now has access to the call log search key
	  associated with the channel so it can be saved in case there is a problem
	  with the call.

	  ASTERISK-26878

	  Change-Id: I2c97ebd928b6f3c5bc80c5729e4d3c07f453049f

2017-03-16 08:42 +0000 [c13ea6080e]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Fix locking behavior in stasis message handlers

	  The queue_stasis_data structure contains various mutable fields that require
	  appropriate locking. Specifically, the 'dying,' 'member_uniqueid,' and
	  'caller_uniqueid' fields need to be locked when read from or written to.

	  Change-Id: I246b7dbff8447acc957a1299f6ad0ebd0fd39088

2017-03-07 19:28 +0000 [15aa3c0a23]  Sean Bright <sean.bright@gmail.com>

	* chan_sip: Add rtcp-mux support

	  ASTERISK-26846 #close

	  Change-Id: I541a1602ff55ab73684e9f8002edb9e0e745d639

2017-03-16 16:50 +0000 [57656e2b5b]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Fix ConfbridgeTalking AMI event description.

	  Thanks to Chris Howard for pointing this out on the wiki.

	  Change-Id: I18e56de09a70e736b5d04719d45ef29cf0636705

2017-03-16 16:37 +0000 [82982a191c]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_asterisk.c: Fix compile error if libsrtp is not installed.

	  struct ast_rtcp does not define the dtls member if SRTP is not enabled.

	  ASTERISK-26732

	  Change-Id: Id15ea212e04490e012f2cf4a56818b4dd948875e

2017-03-16 15:45 +0000 [49b1f1ca16]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_sdp_rtp.c: Fix cut-n-paste error

	  We were inadvertenly referencing the cos_video option to determine if we
	  should set the tos_audio and cos_audio value on the RTP instance.

	  Change-Id: Ia7964f486801d39dc6f5dae570baff079e1595b0

2017-03-16 10:39 +0000 [e6dc28b78f]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_session: Only check localnet if it is defined

	  If local_net is not defined on a transport, transport_state->localnet
	  will be NULL. ast_apply_ha will, be default, return AST_SENSE_ALLOW in
	  this case, causing the external_media_address, if set, to be skipped.

	  This patch causes us to only check if we are sending within a network if
	  local_net is defined.

	  ASTERISK-26879 #close

	  Change-Id: Ib661c31a954cabc9c99f1f25c9c9a5c5b82cbbfb

2017-03-14 16:22 +0000 [44568fc712]  Richard Begg <asterisk@meric.id.au>

	* res_pjsip_sdp_rtp: RTP instance does not use same IP as explicit transport

	  Currently a wildcard address is used for the local RTP socket, which
	  will not always result in the same address as used by the SIP socket
	  (e.g. if explicit transport addresses are configured).
	  Use the transport's host address when binding new local RTP sockets if
	  available.

	  ASTERISK-26851

	  Change-Id: I098c29c9d1f79a4f970d72ba894874ac75954f1a

2017-03-07 08:33 +0000 [5013d8f5d3]  George Joseph <gjoseph@digium.com>

	* res_pjsip:  Symmetric transports

	  A new transport parameter 'symmetric_transport' has been added.

	  When a request from a dynamic contact comes in on a transport with
	  this option set to 'yes', the transport name will be saved and used
	  for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
	  It's saved as a contact uri parameter named 'x-ast-txp' and will
	  display with the contact uri in CLI, AMI, and ARI output.  On the
	  outgoing request, if a transport wasn't explicitly set on the
	  endpoint AND the request URI is not a hostname, the saved transport
	  will be used and the 'x-ast-txp' parameter stripped from the
	  outgoing packet.

	  * config_transport was modified to accept and store the new parameter.

	  * config_transport/transport_apply was updated to store the transport
	    name in the pjsip_transport->info field using the pjsip_transport->pool
	    on UDP transports.

	  * A 'multihomed_on_rx_message' function was added to
	    pjsip_message_ip_updater that, for incoming requests, retrieves the
	    transport name from pjsip_transport->info and retrieves the transport.
	    If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
	    containing the transport name is added to the incoming Contact header.

	  * An 'ast_sip_get_transport_name' function was added to res_pjsip.
	    It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
	    transport name if endpoint->transport is set or if there's an
	    'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
	    ipv6 address.  Otherwise it returns NULL.

	  * An 'ast_sip_dlg_set_transport' function was added to res_pjsip
	    which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
	    pjsip_tpselector.  It calls ast_sip_get_transport_name() and if
	    a non-NULL is returned, sets the selector and sets the transport
	    on the dialog.  If a selector was passed in, it's updated.

	  * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
	    were modified to call ast_sip_dlg_set_transport() instead of their
	    original logic.

	  * res_pjsip/create_out_of_dialog_request was modified to call
	    ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
	    instead of its original logic.

	  * Existing transport logic was removed from endpt_send_request
	    since that can only be called after a create_out_of_dialog_request.

	  * res_pjsip/ast_sip_create_rdata was converted to a wrapper around
	    a new 'ast_sip_create_rdata_with_contact' function which allows
	    a contact_uri to be specified in addition to the existing
	    parameters.  (See below)

	  * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
	    since all it did was transport selection and that is now done in
	    ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.

	  * 'contact_uri' was added to subscription_persistence.  This was
	    necessary because although the parsed rdata contact header has the
	    x-ast-txp parameter added (if appropriate),
	    subscription_persistence_update stores the raw packet which
	    doesn't have it.  subscription_persistence_recreate was then
	    updated to call ast_sip_create_rdata_with_contact with the
	    persisted contact_uri so the recreated subscription has the
	    correct transport info to send the NOTIFYs.

	  * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
	    all it did was transport selection and that is now done in
	    ast_sip_create_dialog_uac.

	  * pjsip_message_ip_updater/multihomed_on_tx_message was updated
	    to remove all traces of the x-ast-txp parameter from the
	    outgoing headers.

	  NOTE:  This change does NOT modify the behavior of permanent
	  contacts specified on an aor.  To do so would require that the
	  permanent contact's contact uri be updated with the x-ast-txp
	  parameter and the aor sorcery object updated.  If we need to
	  persue this, we need to think about cloning permanent contacts into
	  the same store as the dynamic ones on an aor load so they can be
	  updated without disturbing the originally configured value.

	  You CAN add the x-ast-txp parameter to a permanent contact's uri
	  but it would be much simpler to just set endpoint->transport.

	  Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f

2017-03-16 09:07 +0000 [68749a9fa7]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Fix crash when RTCP is not present when DTLS is stopped.

	  This change removes an assumption that when DTLS is stopped
	  an RTCP session will be present on the RTP session. This is not
	  always the case.

	  ASTERISK-26732

	  Change-Id: Ib9f7c09ce0b005efe362dbcc8795202b18f94611

2017-03-15 13:24 +0000 [c87e7dd9ec]  Richard Mudgett <rmudgett@digium.com>

	* autochan/mixmonitor/chanspy: Fix unsafe channel locking and references.

	  Dereferencing struct ast_autochan.chan without first calling
	  ast_autochan_channel_lock() is unsafe because the pointer could change at
	  any time due to a masquerade.  Unfortunately, ast_autochan_channel_lock()
	  itself uses struct ast_autochan.chan unsafely and can result in a deadlock
	  if the original channel happens to get destroyed after a masquerade in
	  addition to the pointer getting changed.

	  The problem is more likely to happen with v11 and earlier because
	  masquerades are used to optimize out local channels on those versions.
	  However, it could still happen on newer versions if the channel is
	  executing a dialplan application when the channel is transferred or
	  redirected.  In this situation a masquerade still must be used.

	  * Added a lock to struct ast_autochan to safely be able to use
	  ast_autochan.chan while trying to get the channel lock in
	  ast_autochan_channel_lock().  The locking order is the channel lock then
	  the autochan lock.  Locking in the other direction requires deadlock
	  avoidance.

	  * Fix unsafe ast_autochan.chan usages in app_mixmonitor.c.

	  * Fix unsafe ast_autochan.chan usages in app_chanspy.c.

	  * app_chanspy.c: Removed unused autochan parameter from next_channel().

	  ASTERISK-26867

	  Change-Id: Id29dd22bc0f369b44e23ca423d2f3657187cc592

2017-03-07 14:13 +0000 [10fa49e327]  Mark Michelson <mmichelson@digium.com>

	* Add rtcp-mux support

	  This commit adds support for RFC 5761: Multiplexing RTP Data and Control
	  Packets on a Single Port. Specifically, it enables the feature when
	  using chan_pjsip.

	  A new option, "rtcp_mux" has been added to endpoint configuration in
	  pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with
	  whatever it communicates with. Asterisk follows the rules set forth in
	  RFC 5761 with regards to falling back to standard RTCP behavior if the
	  far end does not indicate support for rtcp-mux.

	  The lion's share of the changes in this commit are in
	  res_rtp_asterisk.c. This is because it was pretty much hard wired to
	  have an RTP and an RTCP transport. The strategy used here is that when
	  rtcp-mux is enabled, the current RTCP transport and its trappings (such
	  as DTLS SSL session) are freed, and the RTCP session instead just
	  mooches off the RTP session. This leads to a lot of specialized if
	  statements throughout.

	  ASTERISK-26732 #close
	  Reported by Dan Jenkins

	  Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5

2017-03-14 08:49 +0000 [dc4cdafd42]  Torrey Searle <torrey@voxbone.com>

	* res/res_pjsip_refer: call xfer w/o extension

	  When transfering to a URI without an extension, ensure that the
	  s extension of the dialplan is entered

	  ASTERISK-26869 #close

	  Change-Id: I07403df66cf93f09e00a40ab5b41bfc6f72b1525

2017-03-09 11:05 +0000 [982d6173c5]  Sean Bright <sean.bright@gmail.com>

	* app_queue: Handle the caller being redirected out of a queue bridge

	  A caller can leave the Queue() application after being bridged with a
	  member in a few ways:

	    * Caller or member hangup
	    * Caller is transferred somewhere else (blind or atx)
	    * Caller is externally redirected elsewhere

	  The first 2 scenarios are currently handled by subscribing to stasis
	  messages, but the 3rd is not explicitly covered. If a caller is
	  redirected away from the Queue() application, the member who was last
	  bridged with that caller will remain in an "In use" state until the
	  caller hangs up.

	  This patch adds handling of the caller leaving the queue via
	  redirection. We monitor the caller-member bridge, and if the caller is
	  the one that leaves, we treat it the same as we would a caller hangup.

	  ASTERISK-26400 #close
	  Reported by: Etienne Lessard

	  Change-Id: Iba160907770de5a6c9efeffc9df5a13e9ea75334

2017-03-15 08:44 +0000 [0b8a57af6d]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_endpoint_identifier_ip: Don't output error if no header_match.

	  This change ensures that if no header_match option is set on an
	  identify an error message is not output stating the option is set
	  to an invalid value.

	  ASTERISK-26863

	  Change-Id: I239bc6d2319dd3da24ba96a38d4d6e9b5526d62a

2017-03-14 07:50 +0000 [1475604eff]  Matt Jordan <mjordan@digium.com>

	* res_pjsip_endpoint_identifier_ip: Add an option to match requests by header

	  This patch adds a new features to the endpoint identifier module,
	  'match_header'. When set, inbound requests are matched by a provided SIP
	  header: value pair. This option works in conjunction with the existing
	  'match' configuration option, such that if any 'match*' attribute
	  matches an inbound request, the request is associated with the specified
	  endpoint.

	  Since this module now identifies by more than just IP address,
	  appropriate renaming of the module and/or variables can be done in a
	  non-release branch.

	  ASTERISK-26863 #close

	  Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453
	  (cherry picked from commit 30f52d79d7fc9ab0b628bef2b61ea515413795a2)

2017-03-14 16:16 +0000 [f997090877]  Richard Mudgett <rmudgett@digium.com>

	* pbx.c: Fix crash from malformed exten pattern.

	  Forgetting to indicate an exten is a pattern can cause a crash if the
	  "pattern" has a character set range.  e.g., "9999[3-5]" The crash is due
	  to a buffer overwrite because the '-' exten eye-candy wasn't removed as
	  expected and overran the allocated space.

	  The buffer overwrite is fixed two ways in this patch.

	  1) Fix ext_strncpy() to distinguish between pattern and non-pattern
	  extens.  Now '-' characters are removed when they are eye-candy and not
	  when they are part of a pattern character set.  Since the function is
	  private to pbx.c, the return value now returns the number of bytes written
	  to the destination buffer instead of the strlen() of the final buffer so
	  the callers that care don't need to add one.

	  2) Fix callers to ext_strncpy() to supply the correct available buffer
	  size of the destination buffer.

	  ASTERISK-26668

	  Change-Id: I555d97411140e47e0522684062d174fbe32aa84a

2017-03-14 16:51 +0000 [0dc007e94d]  Richard Begg <asterisk@meric.id.au>

	* chan_iax2: Reload of iax peer results in loss of host address/port

	  When using a non-dynamic peer address, build_peer() invalidates the
	  peer address structure by setting the address family to unspecified.
	  However, if dnsmgr is enabled, the subsequent call to ast_dnsmgr_lookup()
	  will not amend the peer address if the cache is still valid, resulting
	  in peer connectivity failures.
	  To fix this, we call ast_dnsmgr_refresh() instead.

	  ASTERISK-26865

	  Change-Id: Id8a89a2f771ebbaf32255a35fe596a6dcb97a082

2017-03-14 15:12 +0000 [59130260e7]  Matt Jordan <mjordan@digium.com>

	* configure: Don't use the progress bar with curl when downloading to stdout

	  In some scenarios, such as when there may not be a terminal (such as
	  inside a Docker container), curl will apparently direct the progress bar
	  to stdout. This can cause extra data to be appended to a file curl'd
	  down to stdout, resulting in md5 verification failures.

	  This patch removes the progress bar, and tells curl to download the file
	  silently.

	  ASTERISK-26872 #close

	  Change-Id: Ie860b020f627d4372b3e7ce9453de5faafeebe6c

2017-03-02 17:11 +0000 [8470c2bdea]  George Joseph <gjoseph@digium.com>

	* RFC sdp: Initial SDP creation

	  * Added additional fields to ast_sdp_options.
	  * Re-organized ast_sdp.
	  * Updated field names to correspond to RFC4566 terminology.
	  * Created allocs/frees for SDP children.
	  * Created getters/setters for SDP children where appropriate.
	  * Added ast_sdp_create_from_state.
	  * Refactored res_sdp_translator_pjmedia for changes.

	  Change-Id: Iefbd877af7f5a4d3c74deead1bff8802661b0d48

2017-03-14 09:55 +0000 [05713c36ea]  Matt Jordan <mjordan@digium.com>

	* configs/samples/hep.conf.sample: Clarify how the HEP stack works

	  This patch updates the documenation in hep.conf.sample to better specify
	  how the various HEP modules interact.

	  ASTERISK-26717 #close

	  Change-Id: I337fb742a89e3ec5edc7fc7a7a0295218d841124

2017-03-14 09:59 +0000 [0ded269bfa]  Matt Jordan <mjordan@digium.com>

	* funcs/func_devstate: Remove new line in Device field of during module load

	  During module loading of func_devstate, Asterisk emits the current
	  device state of all Custom device states currently stored in the AstDB.
	  This was erroneously including a new line character ('\n') to the end of
	  the device state, causing two new lines to be emitted in
	  DeviceStateChange AMI events.

	  Note that this only happened for those device state changes that
	  occurred during startup. Regular device state changes for Custom device
	  states are handled elsewhere, and did not have the newline.

	  ASTERISK-26643 #close
	  Reported by: Roman Bedros
	  Tested by: Matt Jordan
	  patches:
	    ami_devstate.diff uploaded by Roman Bedros (License 6842)

	  Change-Id: I1f4c02fc79c448d43bf725f5039c83d9611d7d93

2017-03-14 09:37 +0000 [b03b72717f]  Matt Jordan <mjordan@digium.com>

	* main/stasis_cache: Demote the ERROR message when removing a nonexistent item

	  This patch demotes the ERROR message that is displayed when a
	  nonexistent item is removed from the Stasis cache. The genesis of this
	  demotion is due to chan_sip's realtime peers and their interaction with
	  Asterisk's core ast_endpoint code, but ostensibly it could happen from
	  other channel drivers as well.

	  Since Mark Michelson already did an excellent job of explaining on this
	  issue, it is quoted here for posterity:

	  "Internally, when a realtime peer is retrieved, Asterisk creates an
	  ast_endpoint structure. When that peer is destroyed, the ast_endpoint is
	  destroyed as well. Part of the destruction of the ast_endpoint involves
	  clearing the Stasis cache of all information about that endpoint. The
	  problem here is that the act of creating the ast_endpoint is not enough
	  to actually put any information in the Stasis cache. Instead, something
	  has to happen, such as a state change, in order for the Stasis cache to
	  have any information about that endpoint. When a device registers,
	  chan_sip creates an ast_endpoint structure, processes the REGISTER, and
	  then destroys the ast_endpoint. When the ast_endpoint is destroyed,
	  there is nothing to destroy in the Stasis cache, so an error message is
	  emitted. When you use rtcachefriends, ast_endpoint structures persist
	  for the lifetime of the module and so you do not see this error
	  message."

	  ASTERISK-25237 #close

	  Change-Id: I53cebc6b4a897a1ab9564182b75c177780feff70

2017-03-08 12:39 +0000 [2d7e68c075]  Matt Jordan <mjordan@digium.com>

	* res_pjsip_endpoint_identifier_ip: Clean up a spaces/tabs issue

	  Tabs > spaces. Always.

	  Change-Id: I899ff662361c7ab0327173bd7851a67b53dd65f1

2017-03-12 09:21 +0000 [12460b05c1]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Don't assume a session will have a channel.

	  When querying for PJSIP specific information using the dialplan
	  function CHANNEL() it is possible that the underlying session
	  will no longer have a channel associated with it. This is
	  most likely to occur when the RTCP HEP module attempts to get
	  the channel name. If this happens then a crash will occur.

	  This change just adds a check that the channel exists on the
	  session before querying it.

	  ASTERISK-26857

	  Change-Id: I113479cffff6ae64cf8ed089e9e1565223426f01

2017-03-10 20:29 +0000 [d1ef127084]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Reduce the need for rebuilds

	  Bundled pjproject should now only rebuild if one of the menuselect
	  "Compiler Flags" options changes.

	  Change-Id: If114a2e16b9e77af371a600d6a5e197bbf28fe43

2017-03-05 15:26 +0000 [36fed72614]  Daniel Journo <dan@keshercommunications.com>

	* pjsip/cli_commands: pjsip show channelstats shows wrong codec

	  * cli_commands.c Fixed CLI output

	  ASTERISK-26822 #close

	  Change-Id: I3889ef6a8f6738fc312fab42db5efacd6e452b01

2017-03-08 14:29 +0000 [b14724adb3]  Daniel Journo <dan@keshercommunications.com>

	* res_musiconhold: moh general section is a class and issues warning

	  * res_musiconhold.c: Ensure the general section is not treated as
	  a moh class.

	  ASTERISK-26353 #close

	  Change-Id: Ia3dbd11ea2b43ab3e6c820a9827811dd24bea82d

2017-03-08 17:08 +0000 [35cfd2c0cc]  Sean Bright <sean.bright@gmail.com>

	* media_cache: Prefer ast_file_is_readable() over access()

	  Change-Id: Icc0dc6e61b2e68d5cdcb74b016b2726a388c7def

2017-03-07 06:25 +0000 [bc2c66b594]  Sean Bright <sean.bright@gmail.com>

	* pbx_spool: Set AST_OUTGOING_ATTEMPT variable on channel

	  Set a variable on the channel that indicates which attempt number we
	  are currently performing to allow for attempt-specific behavior.

	  ASTERISK-26568 #close
	  Reported by: Roman Shubovich

	  Change-Id: Iacd7e8d43b0ed5b6cb021c62f41f1a1f5733dd89

2017-03-07 07:37 +0000 [4e3b0cedba]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_transport_websocket: Add support for IPv6.

	  This change adds a PJSIP patch (which has been contributed upstream)
	  to allow the registration of IPv6 transport types.

	  Using this the res_pjsip_transport_websocket module now registers
	  an IPv6 Websocket transport and uses it for the corresponding
	  traffic.

	  ASTERISK-26685

	  Change-Id: Id1f9126f995b31dc38db8fdb58afd289b4ad1647

2017-03-08 08:16 +0000 [60998371e3]  Daniel Journo <dan@keshercommunications.com>

	* app_voicemail: Cannot set fromstring on a per-mailbox basis

	  * apps/app_voicemail.c fromstring field added to mailbox which will
	  override the global fromstring if set.

	  ASTERISK-24562 #close

	  Change-Id: I5e90e3a1ec2b2d5340b49a0db825e4bbb158b2fe

2017-03-07 13:38 +0000 [5d0371d743]  Mark Michelson <mmichelson@digium.com>

	* res_http_websocket: Fix faulty read logic.

	  When doing some WebRTC testing, I found that the websocket would
	  disconnect whenever I attempted to place a call into Asterisk. After
	  looking into it, I pinpointed the problem to be due to the iostreams
	  change being merged in.

	  Under certain circumstances, a call to ast_iostream_read() can return a
	  negative value. However, in this circumstance, the websocket code was
	  treating this negative return as if it were a partial read from the
	  websocket. The expected length would get adjusted by this negative
	  value, resulting in the expected length being too large.

	  This patch simply adds an if check to be sure that we are only updating
	  the expected length of a read when the return from a read is positive.

	  ASTERISK-26842 #close
	  Reported by Mark Michelson

	  Change-Id: Ib4423239828a013d27d7bc477d317d2f02db61ab

2017-03-07 08:12 +0000 [d51ca4b406]  Jean Aunis <jean.aunis@prescom.fr>

	* chan_sip: Call not cancelled after receiving a 422 response

	  When receiving a 422 response, the invitestate variable must be reset to
	  INV_CALLING.

	  ASTERISK-26841

	  Change-Id: Ia0502d6b02192664cefa4e75bafdd2645ce56099

2017-03-07 05:22 +0000 [3ed05badb9]  Joshua Colp <jcolp@digium.com>

	* core: Add stream topology changing primitives with tests.

	  This change adds a few things to facilitate stream topology changing:

	  1. Control frame types have been added for use by the channel driver
	  to notify the application that the channel wants to change the stream
	  topology or that a stream topology change has been accepted. They are
	  also used by the indicate interface to the channel that the application
	  uses to indicate it wants to do the same.

	  2. Legacy behavior has been adopted in ast_read() such that if a
	  channel requests a stream topology change it is denied automatically
	  and the current stream topology is preserved if the application is
	  not capable of handling streams.

	  Tests have also been written which confirm the multistream and
	  non-multistream behavior.

	  ASTERISK-26839

	  Change-Id: Ia68ef22bca8e8457265ca4f0f9de600cbcc10bc9

2017-03-06 15:54 +0000 [272259a2c6]  Daniel Journo <dan@keshercommunications.com>

	* Saynumber is trying to get "and" from "digits/" subfolder

	  * say.c Changed 'digits/and' to 'vm-and' for en_GB

	  ASTERISK-26598 #close

	  Change-Id: If1b713e5daea6f952b339f139178d292a6c4fcfe

2017-03-06 13:15 +0000 [5a74abc53b]  Sean Bright <sean.bright@gmail.com>

	* pbx_spool: Gracefully handle long lines in call files

	  Per the linked issue, we aren't checking the buffer filled by fgets()
	  to determine if it contains a newline, so we will fail to correctly
	  parse the trailing portion of a long line.

	  This patch increases the buffer size from 256 to 1024, and skips any
	  line that exceeds that length, logging a warning in the process.

	  ASTERISK-17067 #close
	  Reported by: Dave Olszewski

	  Change-Id: I51bcf270c1b4347ba05b43f18dc2094c76f5d7b0

2017-03-02 21:27 +0000 [c9296b23d1]  Richard Mudgett <rmudgett@digium.com>

	* core: Cleanup ast_get_hint() usage.

	  * manager.c:manager_state_cb() Fix potential use of uninitialized hint[]
	  if a hint does not exist for the requested extension.  Ran into this when
	  developing a testsuite test.  The AMI event ExtensionStatus came out with
	  the hint header value containing garbage.  The AMI event PresenceStatus
	  also had the same issue.

	  * manager.c:action_extensionstate() no need to completely initialize the
	  hint[].  Only initialize the first element.

	  * pbx.c:ast_add_hint() Remove unnecessary assignment.

	  * chan_sip.c: Eliminate an unneeded hint[] local variable.  We only care
	  about the return value of ast_get_hint() there.

	  Change-Id: Ia9a8786f01f93f1f917200f0a50bead0319af97b

2017-02-16 04:22 +0000 [7922f26cb0]  Jørgen H <asterisk.org@hovland.cx>

	* res_pjsip WebRTC/websockets: Fix usage of WS vs WSS.

	  According to the RFC[1] WSS should only be used in the Via header
	  for secure Websockets.

	  * Use WSS in Via for secure transport.

	  * Only register one transport with the WS name because it would be
	  ambiguous.  Outgoing requests may try to find the transport by name and
	  pjproject only finds the first one registered.  This may mess up unsecure
	  websockets but the impact should be minimal.  Firefox and Chrome do not
	  support anything other than secure websockets anymore.

	  * Added and updated some debug messages concerning websockets.

	  * security_events.c: Relax case restriction when determining security
	  transport type.

	  * The res_pjsip_nat module has been updated to not touch the transport
	  on Websocket originating messages.

	  [1] https://tools.ietf.org/html/rfc7118

	  ASTERISK-26796 #close

	  Change-Id: Ie3a0fb1a41101a4c1e49d875a8aa87b189e7ab12

2017-02-24 15:30 +0000 [0560c32375]  George Joseph <gjoseph@digium.com>

	* stream: Unit tests for stream read and tweaks framework

	  * Removed the AST_CHAN_TP_MULTISTREAM tech property.  We now rely
	    on read_stream being set to indicate a multi stream channel.
	  * Added ast_channel_is_multistream convenience function.
	  * Fixed issue where stream and default_stream weren't being set on
	    a frame retrieved from the queue.
	  * Now testing for NULL being returned from the driver's read or
	    read_stream callback.
	  * Fixed issue where the dropnondefault code was crashing on a
	    NULL f.
	  * Now enforcing that if either read_stream or write_stream are
	    set when ast_channel_tech_set is called that BOTH are set.
	  * Added the unit tests.

	  ASTERISK-26816

	  Change-Id: If7792b20d782e71e823dabd3124572cf0a4caab2

2017-03-01 07:23 +0000 [1dacf317f3]  Sean Bright <sean.bright@gmail.com>

	* res_config_pgsql: Make 'require' return consistent with other backends

	  res_config_pgsql should match the behavior of other realtime backend
	  drivers so that queue_log can disable adaptive logging.

	  ASTERISK-25628 #close
	  Reported by: Dmitry Wagin

	  Change-Id: Ic1fb1600c7ce10fdfb1bcdc43c5576b7e0014372

2017-02-22 15:11 +0000 [9c55a71798]  Mark Michelson <mmichelson@digium.com>

	* SDP: Add initial SDP state machine.

	  This introduces and documents the various states in the state machine.
	  This also introduces API functions that induce state changes, and places
	  TODO comments telling what needs to be done in addition to what is
	  already there. Those TODOs will be replaced with real code in upcoming
	  changes.

	  Change-Id: I871c0eb480b4c84d83e91ac5628e7a673e8b89ed

2017-02-28 13:48 +0000 [60e9e4fcc0]  Sean Bright <sean.bright@gmail.com>

	* media_cache: Mark cache entry stale if cache file is removed

	  In the event that a cache file is removed out from under us, we should
	  treat the cache entry as stale and force a refresh.

	  ASTERISK-26774 #close
	  Reported by: Igor Gamayunov

	  Change-Id: I3b1bd0c999d59d18664ef73a29823bc5b431dc52

2017-02-28 09:41 +0000 [e5b44c26b4]  Sean Bright <sean.bright@gmail.com>

	* res_config_pgsql: Release table locks where appropriate

	  The find_table() functions NULL or a locked table pointer. We are
	  not consistently calling release_table() in failure paths.

	  Change-Id: I6f665b455799c84b036e5b34904b82b05eab9544

2017-02-28 05:41 +0000 [6ebdcfe27d]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* pjsip.conf.sample: user_agent: not a specific version

	  Use the description of useragent from sip.conf here.

	  ASTERISK-26825 #close

	  Change-Id: I5b33a4aaa0ae1d793289d05e3bc09521affbf755

2017-02-27 20:07 +0000 [fb68db87b1]  George Joseph <gjoseph@digium.com>

	* res_pjsip_pubsub:  Remove unneeded endpoint unref

	  When a subscription was being recreated and the endpoint wasn't
	  found, we were trying to unref the endpoint.  This was causing
	  FRACKs.  Removed the unref.

	  ASTERISK-26823 #close

	  Change-Id: If86d2aecff8fe853c7f38a1bfde721fcef3cd164

2017-02-16 04:16 +0000 [ee0a123f43]  Jørgen H <asterisk.org@hovland.cx>

	* res_pjsip: Fix crash when contact has no status

	  This change fixes an assumption in res_pjsip that a contact will
	  always have a status. There is a race condition where this is
	  not true and would crash. The status will now be unknown when
	  this situation occurs.

	  ASTERISK-26623 #close

	  Change-Id: Id52d3ca4d788562d236da49990a319118f8d22b5

2017-02-21 18:06 +0000 [22242fef5d]  George Joseph <gjoseph@digium.com>

	* res_pjsip_outbound_registration:  Subscribe to network change events

	  Outbound registration now subscribes to network change events
	  published by res_stun_monitor and refreshes all registrations
	  when an event happens.

	  The 'pjsip send (un)register' CLI commands were updated to accept
	  '*all' as an argument to operate on all registrations.

	  The 'PJSIP(Un)Register' AMI commands were also updated to
	  accept '*all'.

	  ASTERISK-26808 #close

	  Change-Id: Iad58a9e0aa5d340477fca200bf293187a6ca5a25

2017-02-27 12:25 +0000 [4692a32ed7]  George Joseph <gjoseph@digium.com>

	* build:  Warn if asterisk is installed in both 32 and 64 bit sys dirs

	  ... and clean them both up on uninstall.

	  We've fixed the issue where 'make install' was installing to
	  /usr/lib on 64-bit systems that use /usr/lib64.  Now we need
	  to clean up the remnants in /usr/lib.

	  * 'make install' now prints a warning if DESTDIR/ASTLIBDIR
	    contains 'lib64' and libasterisk* shared libraries or modules
	    are also found in DESTDIR/ASTLIBDIR with 'lib64' transformed
	    to 'lib'.

	  * 'make uninstall' ALWAYS cleans up both DESTDIR/ASTLIBDIR and
	    DESTDIR/ASTLIBDIR with 'lib64' transformed to 'lib'.

	  ASTERISK-26705

	  Change-Id: I6edddeb3c07a51e7c7ba7cac3c05e4bf3ec3f01f

2017-02-27 07:02 +0000 [ff2b4308d1]  Joshua Colp <jcolp@digium.com>

	* bridge_native_rtp: Handle case where channel joins already suspended.

	  The bridge_native_rtp module did not properly handle the case where
	  a smart bridge operation occurs while a channel is suspended. In this
	  scenario the module would incorrectly set up local or remote RTP
	  bridging despite the media having to flow through Asterisk. The remote
	  endpoint would see two media streams and experience wonky audio.

	  The module has been changed so that it ensures both channels are
	  not suspended when performing the native RTP bridging and this
	  requirement has been documented in the bridge technology.

	  ASTERISK-26781

	  Change-Id: Id4022d73ace837d4a293106445e3ade10dbc7c7c

2016-08-12 11:23 +0000 [5b1796f59d]  frahaase <fra.haase@googlemail.com>

	* Binaural synthesis (confbridge): DTMF conference management.

	  DTMF configuration options for the binaural softmix bridge:
	  toggle binaural rendering (per channel).

	  ASTERISK-26292

	  Change-Id: Ibfe708b9fe26097c1798fcbfcc4dc461267d8af8

2017-02-24 11:49 +0000 [2046743938]  Joshua Colp <jcolp@digium.com>

	* config: Improve documentation and behavior of outbound_proxy option.

	  This change updates the documentation for the outbound_proxy option
	  to ensure it is consistently stated that a full SIP URI must be
	  provided for the option.

	  The res_pjsip_outbound_registration module has also been changed so
	  that the provided outbound_proxy value is checked to ensure it is a
	  URI and if not an error is output stating so.

	  ASTERISK-26782

	  Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593

2017-02-23 13:03 +0000 [c07c6714f2]  Joshua Colp <jcolp@digium.com>

	* channel: Add ast_read_stream function for reading frames from all streams.

	  This change introduces an ast_read_stream function and callback in
	  the channel technology which allows reading frames from all streams
	  and not just the default streams.

	  The stream number has also been added to frames. This is to allow the
	  case where frames are queued onto the channel instead of being read
	  directly from the driver.

	  This change does impose a restriction on reading though: a chain of
	  frames can only contain frames from the same stream.

	  ASTERISK-26816

	  Change-Id: I5d7dc35e86694df91fd025126f6cfe0453aa38ce

2017-02-09 18:05 +0000 [a537dae6d0]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled: Update for pjproject 2.6

	   * Removed all 2.5.5 functional patches.
	   * Updated usages of pj_release_pool to be "safe".
	   * Updated configure options to disable webrtc.
	   * Updated config_site.h to disable webrtc in pjmedia.
	   * Added Richard Mudgett's recent resolver patches.

	  Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7

2017-02-23 15:49 +0000 [b0067bcf2c]  George Joseph <gjoseph@digium.com>

	* build: Execute ldconfig to build cache. (take two)

	  On some platforms a multiarch approach is used for libraries.
	  The build system does not take this into account and still
	  places libraries into the lib directory if no --libdir is
	  specified to configure. On initial startup this results in
	  libasteriskssl.so not being found, as it is not in the multiarch
	  lib directory.  To make matters worse, options were being passed
	  to ldconfig on both Linux and FreeBSD that actually prevented
	  the rebuild of the cache.

	   * Fedora has a /usr/share/config.site that automatically tells
	     autoconf to use /usr/lib64 but CentOS does not. This logic was
	     copied to configure.ac and modified so systems like Ubuntu,
	     which still use /usr/lib for 64-bit systems, aren't affected.

	  Now that we have them in the correct directory...

	  In order for the system loader to find libasteriskssl and
	  libasteriskpj, one of 3 things has to happen...

	    - The linker cache must be rebuilt including the directory
	      where the libasterisk* libraries were installed.  Only root
	      can rebuild the cache.  This was busted.
	    - We have to link the asterisk binary with an rpath pointing
	      to the directrory where the libasterisk* libraries were
	      installed.  This makes things very complicated and will happen
	      over the collective dead bodies of everyone who's had to
	      package a distribution with an rpath.
	    - Finally, you can start asterisk with LD_LIBRARY_PATH set to the
	      directrory where the libasterisk* libraries were installed.

	  There are no other options. So...

	   * The invokation of ldconfig has been moved from main/Makefile
	     to ASTTOPDIR/Makefile, the options have been removed, and
	     DESTDIR/ASTLIBDIR appended.  If you aren't root, you will be
	     warned after the "Asterisk Installation Compete" banner that
	     you must re-run 'make install' as root, manually run
	     'ldconfig DESTDIR/ASTLIBDIR' as root, or run asterisk with
	     LD_LIBRARY_PATH.

	  ASTERISK-26705

	  Change-Id: I2a64b7c33a7d3e9bde20f47e3d3ab771977af982

2017-02-23 14:48 +0000 [0f4b349d37]  Sean Bright <sean.bright@gmail.com>

	* res_config_pgsql: Fix thread safety problems

	  * A missing AST_LIST_UNLOCK() in find_table()

	  * The ESCAPE_STRING() macro uses pgsqlConn under the hood and we were
	    not consistently locking before calling it.

	  * There were a handful of other places where pgsqlConn was accessed
	    directly without appropriate locking.

	  Change-Id: Iea63f0728f76985a01e95b9912c3c5c6065836ed

2017-02-22 05:00 +0000 [6cc890b880]  Joshua Colp <jcolp@digium.com>

	* channel: Add support for writing to a specific stream.

	  This change adds an ast_write_stream function which allows
	  writing a frame to a specific media stream. It also moves
	  ast_write() to using this underneath by writing media
	  frames provided to it to the default streams of the channel.
	  Existing functionality (such as audiohooks, framehooks, etc)
	  are limited to being applied to the default stream only.

	  Unit tests have also been added which test the behavior of
	  both non-multistream and multistream channels to confirm that
	  the write() and write_stream() callbacks are invoked
	  appropriately.

	  ASTERISK-26793

	  Change-Id: I4df20d1b65bd4d787fce0b4b478e19d2dfea245c

2016-08-12 11:23 +0000 [094c26aa68]  frahaase <fra.haase@googlemail.com>

	* Binaural synthesis (confbridge): Adds binaural synthesis to bridge_softmix.

	  Adds binaural synthesis to bridge_softmix (via convolution using libfftw3).
	  Binaural synthesis is conducted at 48kHz.
	  For a conference, only one spatial representation is rendered.
	  The default rendering is applied for mono-capable channels.

	  ASTERISK-26292

	  Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf

2017-02-22 08:53 +0000 [e57961db84]  Sean Bright <sean.bright@gmail.com>

	* res_config_ldap: Various code improvements

	  The initial motivation for this patch was to properly handle memory
	  allocation failures - we weren't checking the return values from the
	  various LDAP library allocation functions.

	  In the process, because update_ldap() and update2_ldap() were
	  substantially the same code, they've been consolidated.

	  Change-Id: Iebcfe404177cc6860ee5087976fe97812221b822

2017-02-22 13:08 +0000 [66a35e2451]  Michael L. Young <elgueromexicano@gmail.com>

	* build_tools:  Fix download_externals to allow the use of curl or wget

	  Not sure if this is really a bug versus an improvement. I can see it being
	  viewed as a bug though by some.

	  The current build_tools/download_externals file depends on wget in order to
	  download external modules.  The current build system is able to discover
	  which tool to use for fetching remote files - either wget or curl.

	  This patch takes advantage of this capability by modifying the two calls to
	  the wget binary to instead use what was discovered by the build system.

	  ASTERISK-26812 #close

	  Change-Id: If9411a2554f009274d377445613ae91192d948a1

2017-02-22 11:12 +0000 [ced73d5b79]  Joshua Colp <jcolp@digium.com>

	* Revert "build: Execute ldconfig to build cache."

	  This reverts commit 28c8e4f58f0f38792c7c79a05bd07788ebf15332.

	  Change-Id: Ie2e1aaf61fd49045994974a4581545ac8348fe4c

2017-02-21 10:47 +0000 [15ed7af027]  Sean Bright <sean.bright@gmail.com>

	* pbx_realtime: Prevent premature extension matching

	  The patterns provided by pbx_realtime were checked in the order in
	  which they were returned from the realtime backend. If there was
	  overlap between multiple patterns, the first one to correctly match was
	  chosen even though it may not have been the best match.

	  We now sort the patterns descending by their length and compare in that
	  order. There may be cases where this still results in a sub-optimal
	  match, but this patch should improve the overall behavior.

	  ASTERISK-18271 #close
	  Reported by: Charlie Smurthwaite

	  Change-Id: I56d9ac15810eb1775966b669c3028e32cc7bd809

2017-02-22 08:32 +0000 [f58aefba5b]  Joshua Colp <jcolp@digium.com>

	* core: Show streams in "core show channel".

	  The "core show channel" CLI command will now output the streams
	  present on the channel with their details.

	  ASTERISK-26811

	  Change-Id: I9c95b57aa09415005f0677a1949a0feb07e4987a

2017-02-21 15:09 +0000 [fc70ca9499]  Sean Bright <sean.bright@gmail.com>

	* pbx_dundi: DUNDi weight parameter not processed correctly

	  The DUNDi weight field is not always converted from network byte order
	  to host byte order. This can result in incorrect weight values and
	  incorrect selection of DUNDi destinations.

	  ASTERISK-18731 #close
	  Reported by: Peter Racz
	  Patches:
	  	dundi_weight.patch (license #6290) patch uploaded by Peter Racz

	  Change-Id: Iba3e1a700ff539db57211a7bbc26f7b22ea9a1be

2017-02-15 14:43 +0000 [a738772edd]  Mark Michelson <mmichelson@digium.com>

	* Add initial SDP state code.

	  This establishes the basic allocation/destruction of an SDP state
	  object, plus some of the simpler getter methods involved. Subsequent
	  tasks will deal with adding a state machine, creating SDPs from
	  capabilities and options, and merging SDPs into a joint SDP.

	  Change-Id: Ie3757ce186f04b65e9d1883f5aace53f24e53709

2017-02-21 10:47 +0000 [ab04a018e4]  Sean Bright <sean.bright@gmail.com>

	* realtime: Fix ast_load_realtime_multientry handling

	  ast_load_realtime_multientry() returns an ast_config structure whose
	  ast_categorys are keyed with the empty strings. Several modules were
	  giving semantic meaning to the category names causing problems at
	  runtime.

	  * app_directory: Treated the category name as the mailbox name, and
	    would fail to direct calls to the appropriate extension after an
	    entry was chosen.

	  * app_queue: Queues, queue members, and queue rules were all affected
	    and needed to be updated.

	  * pbx_realtime: Pattern matching would never succeed because the
	    extension entered by the user was always compared to the empty
	    string.

	  Change-Id: Ie7e44986344b0b76ea8f6ddb5879f5040c6ca8a7

2017-02-21 08:56 +0000 [6e6c96d713]  Sean Bright <sean.bright@gmail.com>

	* realtime: Centralize some common realtime backend code

	  All of the realtime backends create artificial ast_categorys to pass
	  back into the core as query results. These categories have no filename
	  or line number information associated with them and the backends differ
	  slightly on how they create them. So create a couple helper macros to
	  help make things more consistent.

	  Also updated the call sites to remove redundant error messages about
	  memory allocation failure.

	  Note that res_config_ldap sets the category filename to the 'table name'
	  but that is not read by anything in the core, so I've dropped it.

	  Change-Id: I3a1fd91e0c807dea1ce3b643b0a6fe5be9002897

2017-02-16 10:30 +0000 [28c8e4f58f]  Joshua Colp <jcolp@digium.com>

	* build: Execute ldconfig to build cache.

	  On some platforms a multiarch approach is used for libraries.
	  The build system does not take this into account and still
	  places libraries into the lib directory if no --libdir is
	  specified to configure. On initial startup this results in
	  libasteriskssl.so not being found, as it is not in the multiarch
	  lib directory.

	  This change does the minimally invasive thing and executes
	  ldconfig so that the libraries in the lib directory are found
	  and their location cached. By doing so Asterisk starts up fine.

	  If DESTDIR is specified, however, the old logic is executed as
	  the install process may not have permission to alter the ldconfig
	  cache.

	  ASTERISK-26705

	  Change-Id: If4eca46ac510c6fea5568256280ffdb3888d7bb4

2017-01-08 20:32 +0000 [6f15500ced]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_authenticator_digest.c: Fix sorcery's immutable contract violation.

	  The inbound authentication object is supposed to be immutable when it is
	  stored in sorcery.  However, the immutable property is violated if the
	  authentication object does not have a realm set.

	  The immutable contract violation has a different effect depending upon
	  what sorcery back end is used.  If it is the config file back end you
	  would get the same object back until res_pjsip is reloaded.  If it is the
	  real-time or AstDB back end you would get a new object on each query.  If
	  it is cached you would get the same object back until it is refreshed from
	  the database.

	  Once an inbound authentication object has its realm set it may or may not
	  get updated again if the default_realm changes.

	  If the same authentication object is used for inbound and outbound
	  authentication then the immutable violation can make it very hard to
	  determine why the outbound authentication now fails.  The only diagnostic
	  message is a complaint about no realms matching when it had worked
	  earlier.  It fails because of the difference in behaviour for an empty
	  realm setting between inbound and outbound authentication objects.

	  * Fixed the sorcery object immutable violation by creating a new object
	  and setting the default_realm on it instead.  The new object is a shallow
	  copy for speed.

	  * The auth_store thread storage no longer holds an auth ref.  It
	  interferes with the shallow copy and never needed a ref anyway.

	  ASTERISK-26799 #close

	  Change-Id: I2328a52f61b78ed5fbba38180b7f183ee7e08956

2017-02-04 20:17 +0000 [6400f5f309]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Update artificial auth whenever default_realm changes.

	  There was code attempting to update the artificial authentication object
	  whenever the default_realm changed.  However, once the artificial
	  authentication object was created it would never get updated.  The
	  artificial authentication object would require a system restart for a
	  change to the default_realm to take effect.

	  ASTERISK-26799

	  Change-Id: Id59036e9529c2d3ed728af2ed904dc36e7094802

2017-01-01 08:02 +0000 [0b660c9989]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Update authentication realm documentation.

	  Using the same auth section for inbound and outbound authentication is not
	  recommended.  There is a difference in meaning for an empty realm setting
	  between inbound and outbound authentication uses.

	  An empty inbound auth realm represents the global section's default_realm
	  value when the authentication object is used to challenge an incoming
	  request.  An empty outgoing auth realm is treated as a don't care wildcard
	  when the authentication object is used to respond to an incoming
	  authentication challenge.

	  ASTERISK-26799

	  Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce

2017-02-13 17:11 +0000 [7f83bcd63d]  Richard Mudgett <rmudgett@digium.com>

	* pjproject: Fixes to resolve DNS SRV crashes.

	  * Re #1945 (misc): Don't trigger SRV complete callback when there is a
	  parse error.

	  * srv_resolver.c: Don't try to send query if already considered resolved.

	  ** In resolve_hostnames() don't try to resolve a query that is already
	  considered resolved.

	  ** In resolve_hostnames() fix DNS typo in comments.

	  ** In build_server_entries() move a common expression assigning to cnt
	  earlier.

	  * sip_transport.c: Fix tdata object name to actually contain the pointer.

	  It helps if the logs referencing a tdata object buffer actually have a
	  name that includes the correct pointer as part of the name.  Also since
	  the tdata has its own pool it helps if any logs referencing the pool have
	  the same name as the tdata object.  This change brings tdata logging in
	  line with how tsx objects are named.

	  ASTERISK-26669 #close
	  ASTERISK-26738 #close

	  Change-Id: I56af2ded25476b3e870ca586ee69ed6954ef75af

2017-02-20 13:38 +0000 [bf78c3c9c3]  Richard Mudgett <rmudgett@digium.com>

	* pjproject: Increase SENDER_WIDTH column size for 64-bit system logs.

	  ASTERISK-26669
	  ASTERISK-26738

	  Change-Id: Ibae6fc8cae69a1f04df0c577c4c11200499d6fe0

2017-02-06 14:26 +0000 [54812f18b5]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_distributor.c: Update some debug messages to get transaction name.

	  * Removed overloaded unmatched response ignore.  We obviously sent the
	  request so we shouldn't ignore it because it isn't new work.

	  ASTERISK-26669
	  ASTERISK-26738

	  Change-Id: I55fb5cadc83a8e6699b347c6dc7fa32c5a617d37

2017-02-20 06:28 +0000 [b18f1bfb13]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: vm_authenticate accesses uninitialized memory

	  vm_authenticate doesn't always set the passed ast_vm_user argument, so
	  we initialize to 0 before passing it in.

	  ASTERISK-25893 #close
	  Reported by: Filip Jenicek

	  Change-Id: Ia3cc0128f93d352ed9add8d5c2f0f7232c2cbe4a

2017-02-20 11:19 +0000 [7739b0b3ae]  Joshua Colp <jcolp@digium.com>

	* Revert "build: Execute ldconfig to build cache."

	  This reverts commit 8851c3e0885cb704a5a6159a51768ea5297e9b10.

	  Change-Id: I124380be5e3bd57da978428a2a93604336ccd0db

2017-02-20 08:04 +0000 [ffa7d69766]  George Joseph <gjoseph@digium.com>

	* pjproject cli:  Add object count after object lists

	  When listing a container, we now print the number of objects
	  in the container at the end of the list.

	  Change-Id: I791cbc3ee9da9a2af9adc655164b5d32953df812

2017-02-20 05:53 +0000 [e84353b8a8]  Sean Bright <sean.bright@gmail.com>

	* res_config_ldap: Don't try to delete non-existent attributes

	  OpenLDAP will raise an error when we try to delete an LDAP attribute
	  that doesn't exist. We need to filter out LDAP_MOD_DELETE requests
	  based on which attributes the current LDAP entry actually has. There
	  is of course a small window of opportunity for this to still fail,
	  but it is much less likely now.

	  Change-Id: I3fe1b04472733e43151563aaf9f8b49980273e6b

2017-02-20 05:49 +0000 [9f392574f9]  Sean Bright <sean.bright@gmail.com>

	* res_config_ldap: Remove extraneous line numbers from log messages

	  Extraneous line numbers were being output in many log messages. These
	  have been removed.

	  Change-Id: Ice9efa3d252ee87f37fa8f5ea852fda482675431

2017-02-20 05:45 +0000 [ef0944395e]  Sean Bright <sean.bright@gmail.com>

	* res_config_ldap: Make memory allocation more consistent

	  The code in update_ldap() and update2_ldap() was using both Asterisk's
	  memory allocation routines as well as OpenLDAP's. I've changed it so
	  that everything that is passed to OpenLDAP's functions are allocated
	  with their routines.

	  Change-Id: Iafec9c1fd8ea49ccc496d6316769a6a426daa804

2017-02-20 05:30 +0000 [dd3efdf525]  Sean Bright <sean.bright@gmail.com>

	* res_config_ldap: Fix configuration inheritance from _general

	  The "_general" configuration section allows administrators to provide
	  both general configuration options (host, port, url, etc.) as well as a
	  global realtime-to-LDAP-attribute mapping that is a fallback if one of
	  the later sections do not override it. This neglected to exclude the
	  general configuration options from the mapping. As an example, during
	  my testing, chan_sip requested 'port' from realtime, and because I did
	  not have it defined, it pulled in the 'port' configuration option from
	  "_general." We now filter those out explicitly.

	  Change-Id: I1fc61560bf96b8ba623063cfb7e0a49c4690d778

2017-02-20 05:27 +0000 [d6d86f1c09]  Sean Bright <sean.bright@gmail.com>

	* res_config_ldap: Fix erroneous LDAP_MOD_REPLACE in LDAP modify

	  We always treat the first change of our modification batch as a
	  replacement when it sometimes is actually a delete. So we have to pass
	  the correct arguments to the OpenLDAP library.

	  ASTERISK-26580 #close
	  Reported by: Nicholas John Koch
	  Patches:
	  	res_config_ldap.c-11.24.1.patch (license #6833) patch uploaded
	  	by Nicholas John Koch

	  Change-Id: I0741d25de07c9539f1edc6eff3696165dfb64fbe

2017-02-15 11:55 +0000 [44abe214d2]  Sean Bright <sean.bright@gmail.com>

	* res_config_sqlite3: Fix crash when loading with invalid config

	  When ast_config_load() fails with CONFIG_STATUS_FILEINVALID, it has
	  already destroyed the ast_config struct for us. Trying to do it again
	  results in a crash.

	  Change-Id: If6a5c0ca718ad428e01a1fb25beb209a9ac18bc6

2017-02-17 17:06 +0000 [51e3b11989]  Sean Bright <sean.bright@gmail.com>

	* pjproject-bundled: Fix checksum verification when using cURL

	  ASTERISK-26802 #close
	  Reported by: Michael L. Young

	  Change-Id: Iad293080f55d4d69ab615717a15211d916eed613

2017-02-17 16:57 +0000 [0b427f9b59]  Richard Mudgett <rmudgett@digium.com>

	* tcptls.c: Add some missing allocation failure checks.

	  * Fix tcptls_session ref and fd leak in ast_tcptls_server_root().

	  Change-Id: I0ddf01cd3c10d3b6666d7bf68d4e206a37f4fbdb

2017-02-17 14:58 +0000 [dbc3598014]  Mark Michelson <mmichelson@digium.com>

	* Remove extra ast_iostream_close() calls.

	  When AMI encounters an error at the beginning of a session, it would
	  explicitly call ast_iostream_close() on its tcptls session's iostream.
	  It then would jump to a label where it would shut down the tcptls
	  session instance. The tcptls session instance would again attempt to
	  close the iostream.

	  Under normal circumstances, this might go by unnoticed. However, when
	  MALLOC_DEBUG is enabled, all fields on the iostream get set to
	  0xdeaddead when the iostream is freed. Thus a second call to
	  ast_iostream_close() after the iostream has been freed would reslt in an
	  attempt to call SSL_shutdown on 0xdeaddead, which would crash and burn
	  horribly.

	  The fix here is to not directly close the iostream from the dangerous
	  scenarios. The specific scenarios are:
	  * Exceeding the configured authlimit
	  * Failing to build a mansession on a new connection

	  Change-Id: I908f98d516afd5a263bd36b072221008a4731acd

2017-02-14 09:54 +0000 [5a130b2e17]  Mark Michelson <mmichelson@digium.com>

	* Add SDP translator and PJMEDIA implementation.

	  This creates the following:
	  * Asterisk's internal representation of an SDP
	  * An API for translating SDPs from one format to another
	  * An implementation of a translator for PJMEDIA

	  Change-Id: Ie2ecd3cbebe76756577be9b133e84d2ee356d46b

2017-02-07 09:50 +0000 [8af6342555]  Mark Michelson <mmichelson@digium.com>

	* Add initial SDP options.

	  This is step one of adding an SDP API: defining some
	  configurable settings for SDPs. This is based on options
	  that are currently supported in Asterisk.

	  Change-Id: I1ede91aafed403b12a9ccdfb91a88389baa7e5d7

2017-02-16 10:30 +0000 [8851c3e088]  Joshua Colp <jcolp@digium.com>

	* build: Execute ldconfig to build cache.

	  On some platforms a multiarch approach is used for libraries.
	  The build system does not take this into account and still
	  places libraries into the lib directory if no --libdir is
	  specified to configure. On initial startup this results in
	  libasteriskssl.so not being found, as it is not in the multiarch
	  lib directory.

	  This change does the minimally invasive thing and executes
	  ldconfig so that the libraries in the lib directory are found
	  and their location cached. By doing so Asterisk starts up fine.

	  ASTERISK-26705

	  Change-Id: I6d30b6427e9d5e69470e11327c7ff203fa7da519

2017-02-16 08:38 +0000 [e93f2a5142]  Sean Bright <sean.bright@gmail.com>

	* realtime: Fix LIKE escaping in SQL backends

	  The realtime framework allows for components to look up values using a
	  LIKE clause with similar syntax to SQL's. pbx_realtime uses this
	  functionality to search for pattern matching extensions that start with
	  an underscore (_).

	  When passing an underscore to SQL's LIKE clause, it will be interpreted
	  as a wildcard matching a single character and therefore needs to be
	  escaped. It is (for better or for worse) the responsibility of the
	  component that is querying realtime to escape it with a backslash before
	  passing it in. Some RDBMs support escape characters by default, but the
	  SQL92 standard explicitly says that there are no escape characters
	  unless they are specified with an ESCAPE clause, e.g.

	  	SELECT * FROM table WHERE column LIKE '\_%' ESCAPE '\'

	  This patch instructs 3 backends - res_config_mysql, res_config_pgsql,
	  and res_config_sqlite3 - to use the ESCAPE clause where appropriate.

	  Looking through documentation and source tarballs, I was able to
	  determine that the ESCAPE clause is supported in:

	  MySQL 5.0.15   (released 2005-10-22 - earliest version available from
	                  archives)
	  PostgreSQL 7.1 (released 2001-04-13)
	  SQLite 3.1.0   (released 2005-01-21)

	  The versions of the relevant libraries that we depend on to access MySQL
	  and PostgreSQL will not work on versions that old, and I've added an
	  explicit check in res_config_sqlite3 to only use the ESCAPE clause when
	  we have a sufficiently new version of SQLite3.

	  res_config_odbc already handles the escape characters appropriately, so
	  no changes were required there.

	  ASTERISK-15858 #close
	  Reported by: Humberto Figuera

	  ASTERISK-26057 #close
	  Reported by: Stepan

	  Change-Id: I93117fbb874189ae819f4a31222df7c82cd20efa

2017-02-16 08:28 +0000 [f8f513d363]  George Joseph <gjoseph@digium.com>

	* stream:  Rename creates/destroys to allocs/frees

	  To be consistent with sdp implementation.

	  Change-Id: I714e300939b4188f58ca66ce9d1e84b287009500

2017-02-16 05:46 +0000 [30aaeec5a1]  Sean Bright <sean.bright@gmail.com>

	* res_config_sqlite3: Properly create missing columns when necessary

	  There were two specific issues resolved here:

	  1) The code that iterated over the required fields
	     (via ast_realtime_require) was broken for the RQ_INTEGER1 field
	     type. Iteration would stop when the first RQ_INTEGER1 (0) field
	     was encountered.

	  2) sqlite3_changes() was used to try and count the number of rows
	     returned by a SELECT statement. sqlite3_changes() only counts
	     affected rows, so this was always returning the value from the
	     most recent data modification statement. We now separate read-only
	     queries from data modification queries and count rows appropriately
	     in both cases.

	  ASTERISK-23457 #close
	  Reported by: Scott Griepentrog

	  Change-Id: I91ed20494efc3fcfbc2a96ac7646999a49814884

2017-02-15 14:44 +0000 [ac7a34c531]  Joshua Elson <joshelson@gmail.com>

	* http: Ensure capath is defined on all http creations

	  ASTERISK-26794 #close

	  Change-Id: I9cbc3b6b6a8aab590f5ccde9c262a98e4d5253a1

2017-02-15 23:09 +0000 [135bea931c]  Igor Goncharovsky <igor.goncharovsky@gmail.com>

	* chan_unistim: fix char type to have consistent behavior on ARM

	  There is difference exists in behaviour of char type on x86 and ARM.
	  On x86 by default char variable type means signed char, but in ARM
	  unsigned char used. This make binary calculations and negative values
	  works wrong on ARM.

	  This patch change type of char variables used for store negative
	  values and binary calculations to signed char.

	  ASTERISK-26714

	  Change-Id: Id78716dee9568a58419d4ef63c038affc3dfc7ab

2017-02-07 13:17 +0000 [4bdf5d329f]  George Joseph <gjoseph@digium.com>

	* res_pjsip_pubsub:  Correctly implement persisted subscriptions

	  This patch fixes 2 original issues and more that those 2 exposed.

	  * When we send a NOTIFY, and the client either doesn't respond or
	    responds with a non OK, pjproject only calls our
	    pubsub_on_evsub_state callback, no others.  Since
	    pubsub_on_evsub_state (which does the sub_tree cleanup) does not
	    expect to be called back without the other callbacks being called
	    first, it just returns leaving the sub_tree orphaned.  Now
	    pubsub_on_evsub_state checks the event for PJSIP_EVENT_TSX_STATE
	    which is what pjproject will set to tell us that it was the
	    transaction that timed out or failed and not the subscription
	    itself timing our or being terminated by the client. If is
	    TSX_STATE, pubsub_on_evsub_state now does the proper cleanup
	    regardless of the state of the subscription.

	  * When a client renews a subscription, we don't update the
	    persisted subscription with the new expires timestamp.  This causes
	    subscription_persistence_recreate to prune the subscription if/when
	    asterisk restarts.  Now, pubsub_on_rx_refresh calls
	    subscription_persistence_update to apply the new expires timestamp.
	    This exposed other issues however...

	  * When creating a dialog from rdata (which sub_persistence_recreate
	    does from the packet buffer) there must NOT be a tag on the To
	    header (which there will be when a client refreshes a
	    subscription).  If there is one, pjsip_dlg_create_uas will fail.
	    To address this, subscription_persistence_update now accepts a flag
	    that indicates that the original packet buffer must not be updated.
	    New subscribes don't set the flag and renews do.  This makes sure
	    that when the rdata is recreated on asterisk startup, it's done
	    from the original subscribe packet which won't have the tag on To.

	  * When creating a dialog from rdata, we were setting the dialog's
	    remote (SUBSCRIBE) cseq to be the same as the local (NOTIFY) cseq.
	    When the client tried to resubscribe after a restart with the
	    correct cseq, we'd reject the request with an Invalid CSeq error.

	  * The acts of creating a dialog and evsub by themselves when
	    recreating a subscription does NOT restart pjproject's subscription
	    timer.  The result was that even if we did correctly recreate the
	    subscription, we never removed it if the client happened to go away
	    or send a non-OK response to a NOTIFY.  However, there is no
	    pjproject function exposed to just set the timer on an evsub that
	    wasn't created by an incoming subscribe request.  To address this,
	    we create our own timer using ast_sip_schedule_task.  This timer is
	    used only for re-establishing subscriptions after a restart.

	    An earlier approach was to add support for setting pjproject's
	    timer (via a pjproject patch) and while that patch is still included
	    here, we don't use that call at the moment.

	  While addressing these issues, additional debugging was added and
	  some existing messages made more useful.  A few formatting changes
	  were also made to 'pjsip show scheduled tasks' to make displaying
	  the subscription timers a little more friendly.

	  ASTERISK-26696
	  ASTERISK-26756

	  Change-Id: I8c605fc1e3923f466a74db087d5ab6f90abce68e

2017-02-15 11:03 +0000 [11886dea82]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk: Use PJ_ICE_MAX_CAND instead of hard-coding 16

	  pjsip limits the total number of ICE candidates to PJ_ICE_MAX_CAND,
	  which is a compile-time constant. Instead of hard-coding 16 when we
	  enumerate local interfaces, use PJ_ICE_MAX_CAND so that we can
	  potentially collect more interfaces if the compile time options are
	  changed.

	  Tangentially related to ASTERISK~24464

	  Change-Id: I1b85509e39e33b1fed63c86261fc229ba14bbabd

2016-12-22 09:42 +0000 [b58de2fab7]  Dennis Guse <dennis.guse@alumni.tu-berlin.de>

	* Binaural synthesis (confbridge): Adds utils/conf_bridge_binaural_hrir_importer

	  Adds the import tool for converting a HRIR database to hrirs.h

	  ASTERISK-26292

	  Change-Id: I51eb31b54c23ffd9b544bdc6a09d20c112c8a547

2017-02-14 12:33 +0000 [a9c15a0e4c]  Joshua Colp <jcolp@digium.com>

	* stream: Add unit tests for channel stream usage.

	  This change adds unit tests cover the following:

	  1. That retrieving the first media stream of a specific media
	  type from a stream topology retrieves the expected media
	  stream.

	  2. That setting the native formats of a channel which does
	  not support streams results in the creation of streams on
	  its behalf according to the formats of the channel.

	  3. That setting a stream topology on a channel which supports
	  streams sets the topology to the provided one.

	  ASTERISK-26790

	  Change-Id: Ic53176dd3e4532e8c3e97d9e22f8a4b66a2bb755

2017-02-13 16:50 +0000 [275f469a4d]  Sean Bright <sean.bright@gmail.com>

	* app_voicemail: Allow 'Comedian Mail' branding to be overriden

	  Original patch by John Covert, slight modifications by me.

	  ASTERISK-17428 #close
	  Reported by: John Covert
	  Patches:
	  	app_voicemail.c.patch (license #5512) patch uploaded by
	          John Covert

	  Change-Id: Ic3361b0782e5a5397a19ab18eb8550923a9bd6a6

2017-02-13 11:50 +0000 [bf2f091bbb]  George Joseph <gjoseph@digium.com>

	* stream:  Add stream topology to channel

	  Adds topology set and get to channel.

	  ASTERISK-26790

	  Change-Id: Ic379ea82a9486fc79dbd8c4d95c29fa3b46424f4

2017-01-25 16:25 +0000 [2b245b12d9]  Ryan Rittgarn <rrittgarn@techpro.com>

	* app_voicemail: VoiceMailPlayMsg did not play database stored messages

	  When attempting to use VoiceMailPlayMsg with a realtime data backend
	  the message is located, but never retrieved. This patch adds the
	  required RETRIEVE and DISPOSE calls that will fetch the message from
	  the database (and IMAP storage as well for that matter).

	  Also, removed extraneous make_file call.

	  ASTERISK-26723 #close

	  Change-Id: I1e122dd53c0f3d7faa10f3c2b7e7e76a47d51b8c

2017-02-14 08:12 +0000 [662c9e69fa]  Sean Bright <sean.bright@gmail.com>

	* app_record: Add option to prevent silence from being truncated

	  When using Record() with the silence detection feature, the stream is
	  written out to the given file. However, if only 'silence' is detected,
	  this file is then truncated to the first second of the recording.

	  This patch adds the 'u' option to Record() to override that behavior.

	  ASTERISK-18286 #close
	  Reported by: var
	  Patches:
	  	app_record-1.8.7.1.diff (license #6184) patch uploaded by var

	  Change-Id: Ia1cd163483235efe2db05e52f39054288553b957

2017-02-07 11:13 +0000 [9f394d074a]  Sebastian Gutierrez <sgutierrez@integraccs.com>

	* app_queue:  reset abandoned in sl for sl2 calculations

	  ASTERISK-26775 #close

	  Change-Id: I86de4b1a699d6edc77fea9b70d839440e4088284

2017-02-13 11:00 +0000 [6c4657e28e]  Joshua Colp <jcolp@digium.com>

	* stream: Add stream topology unit tests and fix uncovered bugs.

	  This change adds unit tests for the various API calls relating
	  to stream topologies. This includes creation, destruction,
	  inspection, and manipulation.

	  Through this a few bugs were uncovered in the implementation:

	  1. Creating a topology using a format capabilities would fail as
	  the code considered a return value of 0 from the append stream
	  function to indicate an error which is incorrect.

	  2. Not all functions which placed a stream into a topology
	  set the position on the stream itself.

	  3. Appending a stream would cause a frack if the position
	  provided was the last one. This occurred because the existing
	  stream was queried but the index was outside of what the
	  vector was currently at for size.

	  ASTERISK-26786

	  Change-Id: Id5590e87c8a605deea1a89e53169a9c011d66fa0

2017-02-11 09:57 +0000 [3f94373778]  Sean Bright <sean.bright@gmail.com>

	* cli: Fix various CLI documentation and completion issues

	  * app_minivm: Use built-in completion facilities to complete optional
	  arguments.

	  * app_voicemail: Use built-in completion facilities to complete
	  optional arguments.

	  * app_confbridge: Add missing colons after 'Usage' text.

	  * chan_alsa: Use built-in completion facilities to complete optional
	  arguments.

	  * chan_sip: Use built-in completion facilities to complete optional
	  arguments. Add completions for 'load' for 'sip show user', 'sip show
	  peer', and 'sip qualify peer.'

	  * chan_skinny: Correct and extend completions for 'skinny reset' and
	  'skinny show line.'

	  * func_odbc: Correct completions for 'odbc read' and 'odbc write'

	  * main/astmm: Use built-in completion facilities to complete arguments
	  for 'memory' commands.

	  * main/bridge: Correct completions for 'bridge kick.'

	  * main/ccss: Use built-in completion facilities to complete arguments
	  for 'cc cancel' command.

	  * main/cli: Add 'all' completion for 'channel request hangup.' Correct
	  completions for 'core set debug channel.' Correct completions for 'core
	  show calls.'

	  * main/pbx_app: Remove redundant completions for 'core show
	  applications.'

	  * main/pbx_hangup_handler: Remove unused completions for 'core show
	  hanguphandlers all.'

	  * res_sorcery_memory_cache: Add completion for 'reload' argument of
	  'sorcery memory cache stale' and properly implement.

	  Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca

2017-02-10 15:45 +0000 [8b72ec312b]  George Joseph <gjoseph@digium.com>

	* stream:  Add media stream topology definition and API

	  This change adds the media stream topology definition and API for
	  accessing and using it.

	  Some refactoring of the stream was also done.

	  ASTERISK-26786

	  Change-Id: Ic930232d24d5ad66dcabc14e9b359e0ff8e7f568

2017-01-13 11:21 +0000 [75f8167e66]  Norbert Varga <vnorbix@gmail.com>

	* chan_pjsip: Multidomain endpoint finding on call

	  When PJSIP tries to call an endpoint with a domain (e.g. 1000@test.com),
	  the user part is stripped down as it would be a trunk with a specified user,
	  and only the host part is called as a PJSIP endpoint and can't be found.
	  This is not correct in the case of a multidomain SIP account, so the stripping
	  after the @ sign is done only if the whole endpoint (in multidomain case
	  1000@test.com) can't be found.

	  ASTERISK-26248

	  Change-Id: I3a2dd6f57f3bd042df46b961eccd81d31ab202e6

2017-02-13 05:05 +0000 [89871576b9]  Joshua Colp <jcolp@digium.com>

	* channel: Protect flags in ast_waitfor_nandfds operation.

	  The ast_waitfor_nandfds operation will manipulate the flags
	  of channels passed in. This was previously done without
	  the channel lock being held. This could result in incorrect
	  values existing for the flags if another thread manipulated
	  the flags at the same time.

	  This change locks the channel during flag manipulation.

	  ASTERISK-26788

	  Change-Id: I2c5c8edec17c9bdad4a93291576838cb552ca5ed

2017-02-11 11:25 +0000 [07abb39d6a]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Fix inconsistency between warning and action.

	  The original return value corresponded to AST_SIP_AUTHENTICATION_CHALLENGE
	  but we have no authenticator registered to create the challenge.

	  Change-Id: I62368180d774b497411b80fbaabd0c80841f8512

2017-02-11 11:26 +0000 [ce810a892b]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_distributor.c: Fix off-nominal tdata ref leak.

	  Change-Id: I571f371d0956a8039b197b4dbd8af6b18843598d

2017-02-09 10:01 +0000 [0910773077]  Sean Bright <sean.bright@gmail.com>

	* manager: Restore Originate failure behavior from Asterisk 11

	  In Asterisk 11, if the 'Originate' AMI command failed to connect the provided
	  Channel while in extension mode, a 'failed' extension would be looked up and
	  run. This was, I believe, unintentionally removed in 51b6c49. This patch
	  restores that behavior.

	  This also adds an enum for the various 'synchronous' modes in an attempt to
	  make them meaningful.

	  ASTERISK-26115 #close
	  Reported by: Nasir Iqbal

	  Change-Id: I8afbd06725e99610e02adb529137d4800c05345d

2017-02-08 14:27 +0000 [16fdb11bc3]  Richard Mudgett <rmudgett@digium.com>

	* core: Cleanup some channel snapshot staging anomalies.

	  We shouldn't unlock the channel after starting a snapshot staging because
	  another thread may interfere and do its own snapshot staging.

	  * app_dial.c:dial_exec_full() made hold the channel lock while setting up
	  the outgoing channel staging.  Made hold the channel lock after the called
	  party answers while updating the caller channel staging.

	  * chan_sip.c:sip_new() completed the channel staging on off-nominal exit.
	  Also we need to use ast_hangup() instead of ast_channel_unref() at that
	  location.

	  * channel.c:__ast_channel_alloc_ap() added a comment about not needing to
	  complete the channel snapshot staging on off-nominal exit paths.

	  * rtp_engine.c:ast_rtp_instance_set_stats_vars() made hold the channel
	  locks while staging the channels for the stats channel variables.

	  Change-Id: Iefb6336893163f6447bad65568722ad5d5d8212a

2017-02-07 06:56 +0000 [bab4885f1e]  Joshua Colp <jcolp@digium.com>

	* stream: Add media stream definition and API with unit tests.

	  This change adds the media stream definition and API for
	  accessing and using it. Unit tests have also been written
	  which exercise aspects of the API.

	  ASTERISK-26773

	  Change-Id: I3dbe54065b55aaa51f467e1a3bafd67fb48cac87

2017-02-10 09:35 +0000 [648d181d2f]  George Joseph <gjoseph@digium.com>

	* configs/samples: Fix placement of 'identify' entry in sorcery.conf

	  The entry for 'identify' was incorrectly placed in the
	  res_pjsip section when it should be in
	  res_pjsip_endpoint_identifier_ip.

	  ASTERISK-26785 #close

	  Change-Id: Ia1372b12a952bfe2df6b1b1e0e725ca306a5d41a

2017-02-08 11:50 +0000 [46147a8f30]  Mark Michelson <mmichelson@digium.com>

	* Revert "Update qualifies when AOR configuration changes."

	  This reverts commit 6492e91392b8fd394193e411c6eb64b45486093f.

	  The change in question was intended to prevent the need to reload in
	  order to update qualifies on contacts when an AOR changes. However, this
	  ended up causing a deadlock instead.

	  Change-Id: I1a835c90a5bb65b6dc3a1e94cddc12a4afc3d71e

2017-02-07 12:01 +0000 [5422ec140c]  Joshua Colp <jcolp@digium.com>

	* srv: Fix crash when ast_srv_lookup is used and 0 records are returned.

	  When performing an SRV lookup using the ast_srv_lookup function it
	  did not properly handle the situation where 0 records are returned.
	  If this happened it would wrongly assume that at least one record
	  was present.

	  This change fixes the code so it will exit early if an error occurs
	  or if 0 records are returned.

	  ASTERISK-26772
	  patches:
	    srv_lookup.patch submitted by nappsoft (license 6822)

	  Change-Id: I09b19081c74e0ad11c12bf54a257243b1bcb2351

2017-02-06 11:40 +0000 [b79cc62057]  Joshua Colp <jcolp@digium.com>

	* res_stasis_device_state: Protect the adding/removing of subscriptions.

	  The adding and removing of device state subscriptions did not protect
	  fully against simultaneous manipulation. In particular the subscribe
	  case allowed a small window where two subscriptions could be added for
	  the same device state instead of just one.

	  This change makes the code hold the subscriptions lock for the entirety
	  of each operation to ensure that two are not occurring at the same time.

	  ASTERISK-26770

	  Change-Id: I3e7f8eb9d09de440c9024d2dd52029f6f20e725b

2017-02-01 17:56 +0000 [b47cf1a7d6]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix some off nominal tdata leaks.

	  Change-Id: I243a4be5e7fbfe604923764969c4ee04eee89b9d

2017-02-03 15:26 +0000 [7b280e7ccf]  Sebastien Duthil <sduthil@wazo.community>

	* res_ari: fix memory leak for channelvars

	  In ari.conf, when setting the option channelvars, every Stasis channel
	  snapshot would create a list of variable/value that would not be freed
	  when the snapshot is freed, resulting in a often-recurring memory
	  leak.

	  ASTERISK-26767 #close

	  Change-Id: Ia37dd9d68063d7f879193df02ede293e5ded716d

2017-02-03 02:25 +0000 [c6c7f17206]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* libasteriskssl: do nothing with OpenSSL >= 1.1

	  OpenSSL 1.1 requires no explicit initialization. The hacks in the
	  library are not needed. They also happen to fail running Asterisk.

	  Change-Id: I3b3efd5d80234a4c45a8ee58dcfe25b15d9ad100

2017-01-20 23:59 +0000 [bc041ca14a]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* tcptls: use TLS_client_method with OpenSSL 1.1

	  OpenSSL 1.1 introduced TLS_client_method() and deprecated the previous
	  version-specific methods (such as TLSv1_client_method(). Other than
	  being simpler to use and more correct (gain support for TLS newer that
	  TLS1, in our case), the older ones produce a deprecation warning that
	  fails the build in dev-mode.

	  Change-Id: I257b1c8afd09dcb0d96cda3a41cb9f7a15d0ba07

2017-01-20 23:57 +0000 [2c8d0764de]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* openssl 1.1 support: use OPENSSL_VERSION_NUMBER

	  Use OPENSSL_VERSION_NUMBER instead of OPENSSL_API_COMPAT to detect
	  the openssl 1.1 API.

	  Change-Id: I4e448f55ef516aedf6ad154037c35577a421a458

2017-01-31 18:28 +0000 [50029f585e]  Richard Mudgett <rmudgett@digium.com>

	* channel.c: Fix unbalanced read queue deadlocking local channels.

	  Using the timerfd timing module can cause channel freezing, lingering, or
	  deadlock issues.  The problem is because this is the only timing module
	  that uses an associated alert-pipe.  When the alert-pipe becomes
	  unbalanced with respect to the number of frames in the read queue bad
	  things can happen.  If the alert-pipe has fewer alerts queued than the
	  read queue then nothing might wake up the thread to handle received frames
	  from the channel driver.  For local channels this is the only way to wake
	  up the thread to handle received frames.  Being unbalanced in the other
	  direction is less of an issue as it will cause unnecessary reads into the
	  channel driver.

	  ASTERISK-26716 is an example of this deadlock which was indirectly fixed
	  by the change that found the need for this patch.

	  * In channel.c:__ast_queue_frame(): Adding frame lists to the read queue
	  did not add the same number of alerts to the alert-pipe.  Correspondingly,
	  when there is an exceptionally long queue event, any removed frames did
	  not also remove the corresponding number of alerts from the alert-pipe.

	  ASTERISK-26632 #close

	  Change-Id: Ia98137c5bf6e9d6d202ce0eb36441851875863f6

2017-01-31 16:38 +0000 [97c308471d]  Richard Mudgett <rmudgett@digium.com>

	* res_agi: Prevent an AGI from eating frames it should not. (Re-do)

	  A dialplan intercept routine is equivalent to an interrupt routine.  As
	  such, the routine must be done quickly and you do not have access to the
	  media stream.  These restrictions are necessary because the media stream
	  is the responsibility of some other code and interfering with or delaying
	  that processing is bad.  A possible future dialplan processing
	  architecture change may allow the interception routine to run in a
	  different thread from the main thread handling the media and remove the
	  execution time restriction.

	  * Made res_agi.c:run_agi() running an AGI in an interception routine run
	  in DeadAGI mode.  No touchy channel frames.

	  ASTERISK-25951

	  ASTERISK-26343

	  ASTERISK-26716

	  Change-Id: I638f147ca7a7f2590d7194a8ef4090eb191e4e43

2017-01-31 16:32 +0000 [72e3fc5845]  Richard Mudgett <rmudgett@digium.com>

	* Frame deferral: Revert API refactoring.

	  There are several issues with deferring frames that are caused by the
	  refactoring.

	  1) The code deferring frames mishandles adding a deferred frame to the
	  deferred queue.  As a result the deferred queue can only be one frame
	  long.

	  2) Deferrable frames can come directly from the channel driver as well as
	  the read queue.  These frames need to be added to the deferred queue.

	  3) Whoever is deferring frames is really only doing the __ast_read() to
	  collect deferred frames and doesn't care about the returned frames except
	  to detect a hangup event.  When frame deferral is completed we must make
	  the normal frame processing see the hangup as a frame anyway.  As such,
	  there is no need to have varying hangup frame deferral methods.  We also
	  need to be aware of the AST_SOFTHANGUP_ASYNCGOTO hangup that isn't real.
	  That fake hangup is to cause the PBX thread to break out of loops to go
	  execute a new dialplan location.

	  4) To properly deal with deferrable frames from the channel driver as
	  pointed out by (2) above, means that it is possible to process a dialplan
	  interception routine while frames are deferred because of the
	  AST_CONTROL_READ_ACTION control frame.  Deferring frames is not
	  implemented as a re-entrant operation so you could have the unsupported
	  case of two sections of code thinking they have control of the media
	  stream.

	  A worse problem is because of the bad implementation of the AMI PlayDTMF
	  action.  It can cause two threads to be deferring frames on the same
	  channel at the same time.  (ASTERISK_25940)

	  * Rather than fix all these problems simply revert the API refactoring as
	  there is going to be only autoservice and safe_sleep deferring frames
	  anyway.

	  ASTERISK-26343

	  ASTERISK-26716 #close

	  Change-Id: I45069c779aa3a35b6c863f65245a6df2c7865496

2017-02-02 11:26 +0000 [4c51ad158d]  Sean Bright <sean.bright@gmail.com>

	* res_odbc: Remove deprecated settings from sample configuration file

	  ASTERISK-26704 #close
	  Reported by: Anthony Messina

	  Change-Id: I976a1f94cf79c5f31e76174c61f5c6a65fd6354f

2017-02-01 17:14 +0000 [7d9b50a7b2]  Richard Mudgett <rmudgett@digium.com>

	* res_resolver_unbound.c: Fix frequent ref leak caught by excessive ref trap.

	  ASTERISK-26765

	  Change-Id: I27eb97df7f8d7e624b0b9a61c0fcee4718c86d8d

2017-02-01 15:56 +0000 [2849b726b6]  Sean Bright <sean.bright@gmail.com>

	* audiohooks:  Muting a hook can mute underlying frames

	  If an audiohook is placed on a channel that does not require transcoding,
	  muting that hook will cause the underlying frames to be muted as well.

	  The original patch is from David Woolley but I have modified slightly.

	  ASTERISK-21094 #close
	  Reported by: David Woolley
	  Patches:
	        ASTERISK-21094-Patch-1.8-1.txt (license #5737) patch uploaded
	        by David Woolley

	  Change-Id: Ib2b68c6283e227cbeb5fa478b2d0f625dae338ed

2017-02-01 13:54 +0000 [bbed75c3ba]  Mark Michelson <mmichelson@digium.com>

	* Update qualifies when AOR configuration changes.

	  Prior to this change, qualifies would only update in the following
	  cases:
	  * A reload of res_pjsip.so was issued.
	  * A dynamic contact was re-registered after its AOR's qualify_frequency
	    had been changed
	  This does not work well if you are using realtime for your AORs. You can
	  update your database to have a new qualify_frequency, but the permanent
	  contacts on that AOR will not have their qualifies updated. And the
	  dynamic contacts on that AOR will not have their qualifies updated until
	  the next registration, which could be a long time.

	  This change seeks to fix this problem by making it so that whenever AOR
	  configuration is applied, the contacts pertaining to that AOR have their
	  qualifies updated.

	  Additions from this patch:
	  * AOR sorcery objects now have an apply handler that calls into a newly
	    added function in the OPTIONS code. This causes all contacts
	    associated with that AOR to re-schedule qualifies.
	  * When it is time to qualify a contact, the OPTIONS code checks to see
	    if the AOR can still be retrieved. If not, then qualification is
	    canceled on the contact.

	  Alterations from this patch:
	  * The registrar code no longer updates contact's qualify_frequence and
	    qualify_timeout. There is no point to this since those values already
	    get updated when the AOR changes.
	  * Reloading res_pjsip.so no longer calls the OPTIONS initialization
	    function. Reloading res_pjsip.so results in re-loading AORs, which
	    results in re-scheduling qualifies.

	  Change-Id: I2e7c3316da28f389c45954f24c4e9389abac1121

2017-01-31 11:17 +0000 [aeea634bc0]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Handle invocation of callback on outgoing request when error occurs.

	  There are some error cases in PJSIP when sending a request that will
	  result in the callback for the request being invoked.  The code did not
	  handle this case and assumed on every error case that the callback was not
	  invoked.

	  The code has been changed to check whether the callback has been invoked
	  and if so to absorb the error and treat it as a success.

	  ASTERISK-26679
	  ASTERISK-26699

	  Change-Id: I563982ba204da5aa1428989a11c06dd9087fea91

2017-01-30 09:02 +0000 [7a16524a83]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk:  Swap byte-order when sending signed linear

	  Before Asterisk 13, signed linear was converted into network byte order by a
	  smoother before being sent over the network. We restore this behavior by
	  forcing the creation of a smoother when slinear is in use and setting the
	  appropriate flags so that the byte order conversion is always done.

	  ASTERISK-24858 #close
	  Reported-by: Frankie Chin

	  Change-Id: I868449617d1a7819578f218c8c6b2111ad84f5a9

2017-01-31 12:46 +0000 [e252aff9ad]  George Joseph <gjoseph@digium.com>

	* debug_utilities: Install ast_logescalator to /var/lib/asterisk/scripts

	  Forgot to install it with the original patch

	  Change-Id: I8bdb540a6694971ae5fe21f48d532332c6482e4c

2017-01-25 06:50 +0000 [ef4deb8ecd]  George Joseph <gjoseph@digium.com>

	* debug_utilities:  Add ast_logescalator

	  The escalator works by creating a set of startup commands in cli.conf
	  that set up logger channels and issue the debug commands for the
	  subsystems specified.  If asterisk is running when it is executed,
	  the same commands will be issued to the running instance.  The original
	  cli.conf is saved before any changes are made and can be restored by
	  executing '$prog --reset'.

	  The log output will be stored in...
	  $astlogdir/message.$uniqueid
	  $astlogdir/debug.$uniqueid
	  $astlogdir/dtmf.$uniqueid
	  $astlogdir/fax.$uniqueid
	  $astlogdir/security.$uniqueid
	  $astlogdir/pjsip_history.$uniqueid
	  $astlogdir/sip_history.$uniqueid

	  Some minor tweaks were made to chan_sip, and res_pjsip_history
	  so their history output could be send to a log channel as packets
	  are captured.

	  A minor tweak was also made to manager so events are output to verbose
	  when "manager set debug on" is issued.

	  Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543

2017-01-23 09:35 +0000 [178b90af02]  Torrey Searle <torrey@voxbone.com>

	* libastssl/pj: libastssl/pj should have an so_version

	  Issue introduced in b59956a87.  In the non-darwin case libastssl/pj
	  should be versioned.  This causes the symbol file for this lib
	  to not be generated.

	  Change-Id: Ib07ae8c40252813c488e2c1ac6204fd42816dd4c
	  (cherry picked from commit 54b027916a71f2b83b2050cef5ef704ea5de39b2)

2017-01-24 19:51 +0000 [138cd8d019]  Kirill Katsnelson <kkm@smartaction.com>

	* make_build_h: handle backslashes in external strings

	  LikewiseOpen creates user names with a backslash in them. A gentle
	  massage with sed(1) allows such strings to be inserted into build.h
	  properly quoted. I am also adding the same for host name and other
	  strings used in the script that are more or less user-controlled.

	  ASTERISK-26754

	  Change-Id: Iac5ef2b67a68ee58f35ddbf86bb818ba6eabecae

2017-01-24 22:31 +0000 [8270d2436d]  Kirill Katsnelson <kkm@smartaction.com>

	* app_queue: Fix queues randomly disappearing on reload

	  With 500+ queues and a reload every minute, a random queue disappears
	  upon reload. The cause is mususe of the 'dead' flag. Namely, all queues
	  were marked dead up front, and then "resurrected" by dropping this flag
	  for those found in the configuration. But a queue marked dead can be
	  removed also when control leaves the app entry point on a PBX thread.

	  With this change, the queue is marked only not found, and at the end of
	  reload only the queues that are still not found are actually marked as
	  dead, so the dead flag is never reset, and set only on positively dead
	  queues.

	  ASTERISK-26755

	  Change-Id: I3a4537aec9eb8d8aeeaa0193407e3523feb004bf

2017-01-26 07:57 +0000 [7fa3de7ae9]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_endpoint_identifier_ip: Fix memory leak of hosts when resolving.

	  This change adds a missing unreference of the hostname when resolving and
	  also cleans up the iterator.

	  ASTERISK-26735

	  Change-Id: Ic012ebaf3d89e714eec340b7b0c5e63c66af857a

2017-01-25 15:26 +0000 [d32bd63860]  Mark Michelson <mmichelson@digium.com>

	* Add reload options to CLI/AMI stale object commands.

	  Marking an object as stale in a memory cache is supposed to prime the
	  cache so that the next time the item is retrieved, the stale item is
	  deleted from the cache and a background task is run to re-populate the
	  cache with a fresh version of the object.

	  The problem is, there are some object types out there for which there is
	  no natural reason that they would be retrieved from the backend with any
	  regularity. Outbound PJSIP registrations are a good example of this. At
	  startup, they are read, and an object-specific state is created that
	  refers to the initially-retrieved object for all time.

	  Adding the "reload" option to the CLI/AMI commands gives the cache the
	  opportunity to manually re-retrieve the object from the backend, both
	  storing the new object in the cache and applying the new object's
	  configuration to the module that uses that object.

	  Change-Id: Ieb1fe7270ceed491f057ec5cbf0e097bde96c5c8

2017-01-10 17:39 +0000 [20aed30d9a]  Richard Mudgett <rmudgett@digium.com>

	* T.140: Fix format ref and memory leaks.

	  * channel.c:ast_sendtext(): Fix T.140 SendText memory leak.

	  * format_compatibility.c: T.140 RED and T.140 were swapped.

	  * res_rtp_asterisk.c:rtp_red_init(): Fix ast_format_t140_red ref leak.

	  * res_rtp_asterisk.c:rtp_red_init(): Fix data race after starting periodic
	  scheduled red_write().

	  * res_rtp_asterisk.c: Some other minor misc tweaks.

	  Change-Id: Ifa27a2e0f8a966b1cf628607c86fc4374b0b88cb

2017-01-24 15:39 +0000 [ee2b0f2eef]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_endpoint_identifier_ip: Ensure error defaults to 0.

	  When configuring a match using a netmask the error variable was
	  not defaulting to 0. For some people this would cause the code
	  to think an error occurred when adding the match when in reality
	  it added perfectly fine.

	  ASTERISK-26693

	  Change-Id: I850c250813742bddde65c84e739093c9e01dfe56

2017-01-10 17:37 +0000 [930a24a730]  Richard Mudgett <rmudgett@digium.com>

	* astobj2.c: Add excessive ref count trap.

	  Change-Id: I32e6a589cf9009450e4ff7cb85c07c9d9ef7fe4a

2017-01-10 13:11 +0000 [de28c1b9f1]  Richard Mudgett <rmudgett@digium.com>

	* main/app.c: Memory corruption from early format destruction.

	  * make_silence() created a malloced silence slin frame without adding a
	  slin format ref.  When the frame is destroyed it will unref the slin
	  format that never had a ref added.  Memory corruption is expected to
	  follow.

	  * Simplified and fixed counting the number of samples in a frame list for
	  make_silence().

	  * Eliminated an unnecessary RAII_VAR associated with the make_silence()
	  frame.

	  Change-Id: I47de3f9b92635b7f8b4d72309444d6c0aee6f747

2017-01-11 14:59 +0000 [2039eb8edf]  Richard Mudgett <rmudgett@digium.com>

	* frame.c: Fix off-nominal format ref leaks.

	  * ast_frisolate() could leak frame format refs on allocation
	  failures.

	  * Similified code in ast_frisolate() and code used by
	  ast_frisolate().

	  Change-Id: I79566d4d36b3d7801bf0c8294fcd3e9a86a2ed6d

2017-01-13 19:08 +0000 [e922979d49]  Richard Mudgett <rmudgett@digium.com>

	* stasis_bridge.c: Fix off-nominal stasis control ref leak.

	  Change-Id: Ib17218343a6596832060180e19386da9df150ac8

2017-01-10 12:30 +0000 [56854f22d2]  Richard Mudgett <rmudgett@digium.com>

	* res_musiconhold.c: Fix format ref leak when parsing MOH config class.

	  Change-Id: Ica8e8e2ce7604c2c61ec55bef07dc675361d2ea5

2017-01-10 14:03 +0000 [d87f81ddb1]  Richard Mudgett <rmudgett@digium.com>

	* chan_oss.c: Fix format ref leak in oss_read().

	  Change-Id: I0a5d56c7dcf327d60f86a4c25a23571733709fd0

2017-01-10 17:48 +0000 [36bdd7c1a0]  Richard Mudgett <rmudgett@digium.com>

	* Add notes about embedded ast_frame structs holding a format ref.

	  mod_format.h: Note ast_filestream.fr holds a format ref.

	  translate.h: Note ast_trans_pvt.f holds a format ref.

	  Change-Id: I86bda354d725207b41e08920355d7c31b2d7f749

2017-01-20 21:13 +0000 [6f3e8c8e01]  Richard Mudgett <rmudgett@digium.com>

	* PJPROJECT logging: Fix detection of max supported log level.

	  The mechanism used for detecting the maximum log level compiled into the
	  linked pjproject did not work.  The API call simply stores the requested
	  level into an integer and does no range checking.  Asterisk was assuming
	  that there was range checking and limited the new value to the allowable
	  range.  To get the actual maximum log level compiled into the linked
	  pjproject we need to get and save off the initial set log level from
	  pjproject.  This is the maximum log level supported.

	  * Get and save off the initial log level setting before altering it to the
	  desired level on startup.  This has to be done by a macro rather than
	  calling a core function to avoid incorrectly linking pjproject.

	  * Split the initial log level warning messages to warn if the linked
	  pjproject cannot support the requested startup level and if it is too low
	  to get the pjproject buildopts for "pjproject show buildopts".

	  * Adjust the CLI "pjproject set log level" to check the saved max log
	  level and to generate normal output messages instead of a warning message.

	  ASTERISK-26743 #close

	  Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4

2017-01-05 13:21 +0000 [0ea3c371c5]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Implement "pjsip show subscriptions" commands.

	  ASTERISK-23828 #close

	  Change-Id: Ifb8a3b61f447aedc58a8e6b36a810f7566018567

2017-01-23 16:18 +0000 [4bfeda6ee4]  Mark Michelson <mmichelson@digium.com>

	* Free endpoint ACLs when destroying PJSIP endpoints.

	  If endpoint ACLs were specified, they were not being freed
	  when endpoints were destroyed. On systems with realtime endpoints, this
	  could add up quickly since each DB lookup would allocate the ACL without
	  freeing it.

	  ASTERISK-26731 #close
	  Reported by Ustinov Artem

	  Change-Id: Ie1f8bf5b7a0de628c975beba01e69c56893331ad

2017-01-19 09:05 +0000 [6691606723]  George Joseph <gjoseph@digium.com>

	* ari: Implement 'debug all' and request/response logging

	  The 'ari set debug' command has been enhanced to accept 'all' as an
	  application name.  This allows dumping of all apps even if an app
	  hasn't registered yet.  To accomplish this, a new global_debug global
	  variable was added to res/stasis/app.c and new APIs were added to
	  set and query the value.

	  'ari set debug' now displays requests and responses as well as events.
	  This required refactoring the existing debug code.

	  * The implementation for 'ari set debug' was moved from stasis/cli.{c,h}
	    to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted.
	  * In order to print the body of incoming requests even if a request
	    failed, the consumption of the body was moved from the ari stubs
	    to ast_ari_callback in res_ari.c and the moustache templates were
	    then regenerated.  The body is now passed to ast_ari_invoke and then
	    on to the handlers.  This results in code savings since that template
	    was inserted multiple times into all the stubs.

	  An additional change was made to the ao2_str_container implementation
	  to add partial key searching and a sort function.  The existing cli
	  code assumed it was already there when it wasn't so the tab completion
	  was never working.

	  Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf
	  (cherry picked from commit 1d890874f39a5a81b20da44358143ed9b54ab0fe)

2017-01-20 23:41 +0000 [f3f9175df0]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* test_voicemail_api: order of params to VERIFY macros

	  Fix order of parameters in calls to VM_API_INT_VERIFY and
	  VM_API_STRING_VERIFY

	  ASTERISK-26739 #close

	  Change-Id: I30dc6b36893aadad6012be3f16f93aa5720870d6
	  Note: status: builds. Not tested any further.

2017-01-23 09:10 +0000 [96e7291cbd]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled: Fix setting max log level

	  An earlier attempt to prevent pjsua from spitting out an extra 6795
	  lines of debug output every time the testsuite called it was also
	  turning off the ability for asterisk to output debug info when it
	  needed to.  This patch reverts the earlier fix and instead adds
	  a pjproject patch that sets the startup log level to 1 for pjsua
	  pjsystest and the pjsua python binding.  This is an asterisk-only
	  patch that does not affect pjproject functionality and will not be
	  submitted upstream.

	  Change-Id: I347a8b58b2626f2906ccfc1d339e907627a0c9e8

2017-01-23 10:08 +0000 [23690c1b35]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_endpoint_identifier_ip: Read settings before resolving.

	  An option has been added, srv_lookups, which controls whether
	  SRV lookups are performed on the provided match hosts or not.
	  It was possible for this option to be applied after resolution
	  had already happened.

	  This change makes it so hosts are stored away, settings are read
	  and applied, and then resolution is done. This ensures that no
	  matter the ordering the srv_lookups option is in effect.

	  ASTERISK-26735

	  Change-Id: I750378cb277be0140f8c5539450270afbfc43388

2016-11-29 09:31 +0000 [1061539b75]  Lorenzo Miniero <lminiero@gmail.com>

	* media: Add experimental support for RTCP feedback.

	  This change adds experimental support for providing RTCP
	  feedback information to codec modules so they can dynamically
	  change themselves based on conditions.

	  ASTERISK-26584

	  Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857

2017-01-22 17:25 +0000 [cfe72c39cf]  Richard Mudgett <rmudgett@digium.com>

	* LISTFILTER: Remove outdated ERROR message.

	  Feeding LISTFILTER an empty variable results in an invalid ERROR message.
	  Earlier changes made the message useless because we can no longer tell if
	  the variable is empty or does not exist.  It is valid to try to remove a
	  value from an empty list just as it is valid to try to remove a value that
	  is not in a non-empty list.

	  * Removed the outdated ERROR message.

	  * Added more test cases to the LISTFILTER unit test.

	  Change-Id: Ided9040e6359c44a335ef54e02ef5950a1863134

2017-01-21 14:43 +0000 [dbb9c8141d]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* tests: use datadir for sound files

	  Some (voicemail-related) tests API symlinks beep.gsm and other files
	  from ast_config_AST_VAR_DIR. It should use ast_config_AST_DATA_DIR.

	  ASTERISK-26740 #close

	  Change-Id: Id49c56fb9e16df64b1a2b829693ca7601252df89

2017-01-05 15:11 +0000 [ef9164b9ca]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Fix AMI event list counts.

	  Fix the AMI PJSIPShowSubscriptionsInbound, PJSIPShowSubscriptionsOutbound,
	  and PJSIPShowResourceLists actions event counts.  The reported counts may
	  not necessarily be accurate depending on what happens.

	  The subscriptions count would be wrong if Asterisk ever has outbound
	  subscriptions.

	  The resource list count could be wrong if a list were added or removed
	  during the AMI action being processed.

	  Change-Id: I4344301827523fa174960a42c413fd19abe4aed5

2017-01-05 13:02 +0000 [ab858295a2]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Fix incorrect message string wrapping.

	  Change-Id: Id771e6fe56d89ce365ddcbb423f820af97211120

2017-01-05 13:01 +0000 [6d648185bc]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Eliminate trivial SCOPED_LOCK usage.

	  Change-Id: Ie0b69a830385452042fa19e7d267c6790ec6b6be

2017-01-05 12:58 +0000 [90f3b1270c]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: alloca can never fail.

	  Change-Id: Ia2a6158e5fdf311bc2a1c0c43417978de504b1f1

2017-01-13 11:03 +0000 [d16b3a9917]  George Joseph <gjoseph@digium.com>

	* debug_utilities:  Create ast_loggrabber

	  ast_loggrabber gathers log files from customizable search patterns,
	  optionally converts POSIX timestamps to a readable format and
	  tarballs the results.

	  Also a few tweaks were made to ast_coredumper.

	  Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495
	  (cherry picked from commit c70915287837704090d75f181525765de7a17221)

2017-01-01 03:47 +0000 [48730ae65e]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_authenticator_digest.c: Fix spacing in warning messages.

	  Change-Id: I573f0343c0c63a785cd4da60d57cc9f8b9ce7f49

2016-12-22 04:07 +0000 [40b9766a31]  Martin Tomec <tomec.martin@gmail.com>

	* app_queue: add RINGCANCELED log event on caller hang up

	  QueueLog did not log ringnoanswer when the caller abandoned call
	  before first timeout. It was impossible to get agent membername
	  and ringing duration for this short calls. After some discusions
	  it seems that the best way is to add new event RINGCANCELED,
	  which is generated after caller hangup during ringing.

	  ASTERISK-26665

	  Change-Id: Ic70f7b0f32fc95c9378e5bcf63865519014805d3

2017-01-12 15:58 +0000 [283c16c6b6]  Kevin Harwell <kharwell@digium.com>

	* abstract/fixed/adpative jitter buffer: disallow frame re-inserts

	  It was possible for a frame to be re-inserted into a jitter buffer after it
	  had been removed from it. A case when this happened was if a frame was read
	  out of the jitterbuffer, passed to the translation core, and then multiple
	  frames were returned from said translation core. Upon multiple frames being
	  returned the first is passed on, but sebsequently "chained" frames are put
	  back into the read queue. Thus it was possible for a frame to go back into
	  the jitter buffer where this would cause problems.

	  This patch adds a flag to frames that are inserted into the channel's read
	  queue after translation. The abstract jitter buffer code then checks for this
	  flag and ignores any frames marked as such.

	  Change-Id: I276c44edc9dcff61e606242f71274265c7779587

2016-11-06 06:30 +0000 [8cc1cd5df7]  Sebastian Gutierrez <sgutierrez@integraccs.com>

	* app_queue: Add QueueUpdate application.

	  Add an application that allows tracking outbound calls
	  using app_queue.

	  ASTERISK-19862

	  Change-Id: Ia0ab64aed934c25b2a25022adcc7c0624224346e

2017-01-13 21:23 +0000 [f4e77a5678]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Change when high water warning logged.

	  The task processor queue reached X scheduled tasks message was originally
	  intended to get logged only once per task processor to prevent spamming
	  the log.  This is no longer necessary since high and low water thresholds
	  can better control when the message is logged.

	  It is beneficial to generate the warning each time a task processor
	  reaches the high water level because PJSIP stops processing new requests
	  while any high water alert is active.  Without this change you would have
	  to enable at least debug level 3 logging to know about a repeated alert
	  trigger.

	  * Made generate the warning message whenever a task is pushed into the
	  task processor that triggers the high water alert.

	  * Appended 'again' to the warning for a repeated high water alert trigger.

	  Change-Id: Iabf75a004f7edaf1e5e8c323099418e667cac999

2017-01-10 05:54 +0000 [e0e502d9d2]  Aaron An <anjb@ti-net.com.cn>

	* res_rtp_asterisk:  Fix bug in function CHANNEL(rtcp, all_rtt)

	  Function CHANNEL(rtcp,all_rtt) CHANNEL(rtcp,all_loss) CHANNEL(rtcp,all_jitter)
	  always return 0.0 due to wrong define of macro "AST_RTP_SATA_SET" and
	  "AST_RTP_STAT_STRCPY".
	  It should compare "combined" with "stat" not "current_stat".

	  ASTERISK-26710 #close
	  Reported-by: Aaron An
	  Tested-by: AaronAn

	  Change-Id: Id4140fafbf92e2db689dac5b17d9caa009028a15

2017-01-10 18:10 +0000 [0d53c91fba]  George Joseph <gjoseph@digium.com>

	* debug_utilities:  Create the ast_coredumper utility

	  This utility allows easy manipulation of asterisk coredumps.

	  * Configurable search paths and patterns for existing coredumps
	  * Can generate a consistent coredump from the running instance
	  * Can dump the lock_infos table from a coredump
	  * Dumps backtraces to separate files...
	    - thread apply 1 bt full -> <coredump>.thread1.txt
	    - thread apply all bt -> <coredump>.brief.txt
	    - thread apply all bt full -> <coredump>.full.txt
	    - lock_infos table -> <coredump>.locks.txt
	  * Can tarball corefiles and optionally delete them after processing
	  * Can tarball results files and optionally delete them after processing
	  * Converts ':' in coredump and results file names '-' to facilitate
	    uploading.  Jira for instance, won't accept file names with colons
	    in them.

	  Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1].

	  [1] For *BSDs, the "devel/gdb" package might have to be installed to
	  get a recent gdb.  The utility will check all instances of gdb
	  it finds in $PATH and if one isn't found that can run python, it
	  prints a friendly error.

	  Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd
	  (cherry picked from commit cb47b4556053cd50d9102eef913671ad0306062d)

2017-01-08 10:29 +0000 [e54c8aec34]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Fix compilation with MALLOC_DEBUG

	  When MALLOC_DEBUG was specified, make was failing.  Immediately
	  remaking would work.  The issues was in the ordering of the make
	  dependencies.

	  Change-Id: If6030b54fc693f3179f32bfd20c6b5d5f1b3f7cd

2017-01-05 06:11 +0000 [a7d856cd96]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_endpoint_identifier_ip: Add support for SRV lookups.

	  This change implements SRV support for the IP based endpoint
	  identifier module. All possible addresses through SRV are looked
	  up and added as matches. If no SRV records are available a
	  fallback to normal host resolution is done. If an IP address
	  is provided then no SRV lookup occurs.

	  This is configured using the "srv_lookups" option on the
	  identify section and defaults to "yes".

	  ASTERISK-26693

	  Change-Id: I6b641e275bf96629320efa8b479737062aed82ac

2016-11-06 06:37 +0000 [740ca862e4]  Sebastian Gutierrez <sgutierrez@integraccs.com>

	* app_queue: add new Service Level calculation

	  Adds a new formula for SL2 and documentation

	  ASTERISK-26559

	  Change-Id: I0970c620460507cd9d45b0d43600779c8915e770

2016-12-19 15:03 +0000 [d96e350256]  Jonathan R. Rose <jonathan.rose@motorolasolutions.com>

	* core/pbx: dialplan show - display filename/line#

	  Adds the ability for extensions to be registered to include filename and
	  line number so that dialplan show output can show the filename and line
	  number of a config file responsible for generating a given extension.

	  This only affects config modules that are written to use the new extension
	  registering functions. In this patch, that only includes pbx_config, so
	  extensions registered in extensions.conf and any included extension will
	  be shown in this manner. Extensions registered in this manner will show
	  the filename and line number *instead* of the registrar.

	  ASTERISK-26658 #close
	  Reported by: Jonathan R. Rose

	  Change-Id: Ieccc6abccdff34ed5c7da3511fd24972b8f2dd30

2016-12-22 09:13 +0000 [aea2285865]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip_session: Access SIPDOMAIN via Dialplan.

	  This feature was available in the SIP channel driver chan_sip. For example,
	  Asterisk is the outbound proxy and has to handle all SIP-URIs, even domains not
	  local to Asterisk. In that case, SIPDOMAIN is used in the Dialplan, to detect
	  and dial remote SIP-URIs. This change here sets the SIP destination domain of
	  an inbound call (SIPDOMAIN) in the SIP channel driver res_pjsip as well.

	  ASTERISK-26670 #close

	  Change-Id: I27c880dc404a3c1c6792e1ba3545475339577243

2017-01-04 05:50 +0000 [e220c11bec]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Remember SDP negotiation on SIP_CODEC_INBOUND.

	  After a SIP_CODEC_INBOUND in the dialplan, do not continue with cached formats
	  but remember the joint format. Cached formats contain default parameters,
	  often create an empty fmtp line. However, a joint format might have passed
	  format_get_joint(.) in a res_format_attr_* module (like Opus Codec) and
	  contain the resulting format parameters from a SDP negotiation.

	  ASTERISK-26691 #close

	  Change-Id: I35712d98a793d4c3efdd156cec57deab9014b1dc

2017-01-03 15:14 +0000 [ceb9dae566]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Compile pjsua with max log level = 2

	  A while back, we changed config_site.h to set PJ_LOG_MAX_LEVEL = 6.
	  This allowed us to control the log level better from inside Asterisk.
	  An unfortunate side effect of this was that the pjsua binary and
	  python bindings were also compiled with log level set to 6 so whenever
	  a testsuite test that uses pjsua runs, it spits out 6795 lines of
	  debug in an instant even before the test starts.  I believe this
	  overruns the Jenkins capture buffer and prevents the test from
	  properly terminating.  In turn, this results in the testsuite just
	  hanging until the job is killed.  It's more frequent on the higher
	  end agents because they can spit out the messages faster.

	  Unfortunately, the messages are all spit out before we have control
	  of the python pj.Lib instance where we can set logging levels so the
	  only alternative was to actually compile pjsua and _pjsua.so with an
	  overridden PJ_LOG_MAX_LEVEL.  Although defining a lower max level was
	  done in the Makefile, the define in config_site.h had to be wrapped
	  with "#ifndef" so the change would take effect.

	  Change-Id: I2af9e7d48dde1927279c586c9c725d868fe6f3ff

2016-12-22 16:00 +0000 [ae57652983]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Use session for retrieving CHANNEL() information.

	  The CHANNEL() dialplan function implementation for PJSIP allows
	  querying of PJSIP specific information. This used the channel
	  passed in to get the PJSIP session and associated information.
	  It is possible for this channel to be masqueraded and end
	  up as a different channel type by the time the information
	  request is actually acted upon.

	  This change retrieves the PJSIP session safely and accesses
	  data from it (including channel). This provides a guarantee
	  that the session and channel will not be altered when the
	  request is being acted upon.

	  ASTERISK-26673

	  Change-Id: I335e12b89e1820cafdd92b3e7526b8ba649eb7e6

2016-12-31 19:56 +0000 [386e3a01b3]  Joshua Elson <joshelson@gmail.com>

	* res_pjsip: Fix known compact header issues

	  ASTERISK-26684 #close

	  Change-Id: Ifd7e401c45015119dd5e8421dbfe3afa6381744a

2016-12-30 06:59 +0000 [aad29b9bca]  Martin Tomec <tomec.martin@gmail.com>

	* res_calendar: delete old calendars after reload

	  When "fetch_again_at_reload" is set in config, we create now
	  new object and thread for each reloaded calendar (with new
	  configuration). Old calendar should be then unlinked, so the
	  old thread can exit and free memory.

	  ASTERISK-26683

	  Change-Id: Ic17fba9371c5a8b26a6bc54ea4957c13a32a343e

2016-12-30 09:10 +0000 [5a5953f98c]  George Joseph <gjoseph@digium.com>

	* res_pjsip_refer:  Handle compact Refer-To header.

	  refer_incoming_refer_request needed to look for the "r" header as well
	  as the "Refer-To" header.

	  ASTERISK-26655 #close
	  patches:
	  	refer_compact_fix.diff	submitted by JoshE (license 6075)

	  Change-Id: I610410a99b02427ea5db887aeb454d5f12c2259f

2016-12-23 12:11 +0000 [ac04e63ac2]  Richard Mudgett <rmudgett@digium.com>

	* bridge_native_rtp.c: Minor code cleanups.

	  In native_rtp_bridge_compatible_check()

	  * Made one variable declaration per line.

	  * Extracted if test assignment to make the test easier to see.

	  * Made long if tests easier to see the combinatorial logic.

	  * Added bridge id to a couple debug messages.

	  Change-Id: I65bc5732aa7c9a2537f062f106fbea711cf2daad

2016-12-23 12:10 +0000 [da6f40c9ff]  Richard Mudgett <rmudgett@digium.com>

	* bridge_native_rtp.c: Fix native rtp bridge data race.

	  native_rtp_bridge_compatible() didn't lock the bridge channels before
	  checking the channels for native bridging ability.  As a result, one of
	  the channel's native format capabilities structure got replaced out from
	  under the native bridge check.  Use of a stale pointer to freed memory
	  causes bad things to happen.

	  MALLOC_DEBUG, DO_CRASH, and the
	  tests/channels/pjsip/transfers/blind_transfer/caller_direct_media
	  testsuite test caught this.

	  * Add missing channel locking in native_rtp_bridge_compatible().

	  Change-Id: If25fdb3ac8e85563c4857fb8216b3d9dc3d0fa53

2016-12-21 16:28 +0000 [b576b58d74]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Fix uninitialized memory crash.

	  ast_rtp_remote_address_set() could pass an uninitialized 'us' parameter to
	  ast_ouraddrfor().  If ast_ouraddrfor() returns an error then the 'us'
	  parameter may not get initialized.  Thus when the code tries to save the
	  'us' parameter to the local address we could try to copy a ridiculous
	  sized memory buffer and segfault.

	  * Made pass an initialized 'us' parameter to ast_ouraddrfor().

	  * Optimized out the 'us' struct variable.

	  ASTERISK-26672 #close

	  Change-Id: I4acea5dcdf0813da2c7d3e11c2d6067d160d17dc

2016-12-21 16:25 +0000 [67cc8499a2]  Richard Mudgett <rmudgett@digium.com>

	* acl.c: Improve ast_ouraddrfor() diagnostic messages.

	  * Made not generate strings unless they will actually be used.

	  ASTERISK-26672

	  Change-Id: I155fbe7fdff5ce47dfe5326f3baf5446849702c3

2016-12-21 17:54 +0000 [67b47191e9]  Richard Mudgett <rmudgett@digium.com>

	* chan_rtp.c: Fix uninitialized memory crash.

	  unicast_rtp_request() could pass an uninitialized 'us' parameter to
	  ast_ouraddrfor().  If ast_ouraddrfor() returns an error then the 'us'
	  parameter may not get initialized.  Thus when the code tries to save the
	  'us' parameter to the local address we could try to copy a ridiculous
	  sized memory buffer and segfault.

	  * Made pass an initialized 'us' parameter to ast_ouraddrfor() and abort
	  the UnicastRTP channel request if it fails.

	  ASTERISK-26672

	  Change-Id: I1ef7a7c09f4da4f15dcb6de660d2bcac5f2a95c0

2016-12-21 17:55 +0000 [2fc65173e5]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Initialize ourip passed to ast_find_ourip().

	  We access uninitialized memory when the 'ourip' parameter does not
	  have an initial guess to our IP address.

	  ASTERISK-26672

	  Change-Id: I35507ea1ad7455d2be188f6ccdd4add7bd150e15

2016-12-07 15:23 +0000 [8b7d252987]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Fix off nominal memory leak.

	  Change-Id: I95b1088d11244a2edae6607c12fbf33b38658a75

2016-12-14 02:21 +0000 [bab253ac9f]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Fixes to various issues reported by pyflakes

	  Pyflake is a python (2) source checker. This patch fixes various
	  (mostly trivial) errors and warnings it reports.

	  Change-Id: Ia35c5ac61751b927814cf693994c632c412386ea

2016-12-09 12:23 +0000 [f461f65dea]  Martin Tomec <tomec@ipex.cz>

	* app_queue: Ensure member is removed from pending when hanging up.

	  In some cases member is added to pending_members, and the channel
	  is hung up before any extension state change. So the member would
	  stay in pending_members forever. So when we call do_hang, we
	  should also remove member from pending.

	  ASTERISK-26621 #close

	  Change-Id: Iae476b5c06481db18ebe0fa594b3e80fdc9a7d54

2016-12-18 15:23 +0000 [d29eb3b99d]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Make build single threaded

	  There were just too many issues in various environments with
	  multi threaded building of pjproject.  It doesn't really speed
	  things up anyway since asterisk is already being compiled in
	  parallel.

	  Change-Id: Ie5648fb91bb89b4224b6bf43a0daa1af793c4ce1

2016-12-08 20:00 +0000 [8fbb384ea2]  Corey Farrell <git@cfware.com>

	* chan_sip: Reorder unload_module to deal with stuck TCP threads.

	  In some situations TCP threads may become frozen.  This creates the
	  possibility that Asterisk could segfault if they become unfrozen after
	  chan_sip has been dlclose'd.  This reorders the unload_module process to
	  allow abort if threads do not exit within 5 seconds.

	  High level order as follows:
	  1) Unregister from the core to stop new requests.
	  2) Signal threads to stop
	  3) Clear config based tables (but do not free the table itself).
	  4) Verify that threads have shutdown, cancel unload if not.
	  5) Clean all remaining resources.

	  ASTERISK-26586

	  Change-Id: Ie23692041d838fbd35ece61868f4c640960ff882

2016-12-16 01:32 +0000 [147b8e636e]  David M. Lee <dlee@respoke.io>

	* configure: fix with-pjproject-bundled

	  The AC_ARG_WITH macro's shell variable is withval; not enableval. Purely
	  coincidentally, the option would work when --enable-dev-mode is given.

	  Also fixed a portability problem with bootstrap.sh, since -printf is not
	  a portable option for find.

	  Change-Id: I0f0e5b1a934b5af5737713834361e9c95b96b376

2016-12-15 13:25 +0000 [d27dee3cca]  Richard Mudgett <rmudgett@digium.com>

	* autosupport: Add 'pjproject show buildopts'

	  Change-Id: I8aa55a7c3fb175235ddc7f85e9457d5102d06fa7

2016-12-14 14:21 +0000 [9404efa6f4]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi.c: Fix bounds check regression.

	  Caused by ASTERISK-25494

	  Change-Id: I1fc408c1a083745ff59da5c4113041bbfce54bcb

2016-12-13 14:34 +0000 [45a5e2abc6]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Add/update ERROR msg if invalid URI.

	  ASTERISK-24499

	  Change-Id: Ie305153e47e922233b2ff24715e0e326e5fa3a6c

2016-12-12 18:38 +0000 [44e72c9d44]  Richard Mudgett <rmudgett@digium.com>

	* MESSAGE: Flush Message/ast_msg_queue channel alert pipe.

	  ASTERISK-25083

	  Change-Id: Id54baa57a8dbca84e29f28bcd2ffc0a5ac12d8b2

2016-12-13 14:06 +0000 [19328de2ab]  George Joseph <gjoseph@digium.com>

	* res_sorcery_memory_cache:  Change an error to a debug message

	  When a sorcery user calls ast_sorcery_delete on an object that
	  may have already expired from the cache, res_sorcery_memory_cache
	  spits out an ERROR.  Since this can happen frequently and validly when
	  an inbound registration expires after the cache entry expired, the
	  errors are unnecessary and misleading.  Changed to a debug/1.

	  Change-Id: Idf3a67038c16e3da814cf612ff4d6d18ad29ecd7

2016-12-09 08:14 +0000 [31268e0a28]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Retry download if previously saved tarball is bad

	  If a tarball is corrupted during download, the makefile will attempt to
	  download it again. If the tarball somehow gets corrupted after it's
	  downloaded however, the makefile was just failing.  We now
	  retry the download.

	  ASTERISK-26653 #close

	  Change-Id: I1b24d454852d80186f60c5a65dc4624ea8a1c359

2016-12-08 12:43 +0000 [4c6ba1dbba]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* Fix typo in chan_sip

	  The conditional expressions of the 'if' operators
	  situated alongside each other are identical.

	  Change-Id: I652b6dcddb3be007e669a6aa8107edb31a1ddafb

2016-12-08 12:30 +0000 [934aa2c768]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* res_pjsip: Fix 'A = B != C' kind.

	  Consider reviewing the expression of the 'A = B != C' kind.
	  The expression is calculated as following: 'A = (B != C)'

	  Change-Id: Ibaa637dfda47d51a20e26069d3103e05ce80003d

2016-12-08 12:54 +0000 [51118e7d70]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* chan_sip: Delete unneeded check

	  P is always true. We check it before

	  Change-Id: Iee61cda002a9f61aee26b9f66c5f9b59e3389efb

2016-12-08 12:58 +0000 [fe5be81821]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* Small code cleanup in chan_sip

	  The conditional expressions of the 'if' operators situated
	  alongside each other are identical.

	  Change-Id: I2cf7c317b106ec14440c7f1b5dcfbf03639f748a

2016-12-08 12:34 +0000 [149d8db96c]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* Fix IO conversion bug

	  Expression 'rlen < 0' is always false.
	  Unsigned type value is never < 0.

	  Change-Id: Id9f393ff25b009a6c4a6e40b95f561a9369e4585

2016-11-30 09:31 +0000 [c796f00c35]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Do not allow non-SP/HTAB between header key and colon.

	  RFC says SIP headers look like:

	      HCOLON  =  *( SP / HTAB ) ":" SWS
	      SWS     =  [LWS]                    ; sep whitespace
	      LWS     =  [*WSP CRLF] 1*WSP        ; linear whitespace
	      WSP     =  SP / HTAB                ; from rfc2234

	  chan_sip implemented this:

	      HCOLON  =  *( LOWCTL / SP ) ":" SWS
	      LOWCTL  = %x00-1F                   ; CTL without DEL

	  This discrepancy meant that SIP proxies in front of Asterisk with
	  chan_sip could pass on unknown headers with \x00-\x1F in them, which
	  would be treated by Asterisk as a different (known) header.  For
	  example, the "To\x01:" header would gladly be forwarded by some proxies
	  as irrelevant, but chan_sip would treat it as the relevant "To:" header.

	  Those relying on a SIP proxy to scrub certain headers could mistakenly
	  get unexpected and unvalidated data fed to Asterisk.

	  This change fixes so chan_sip only considers SP/HTAB as valid tokens
	  before the colon, making it agree on the headers with other speakers of
	  SIP.

	  ASTERISK-26433 #close
	  AST-2016-009

	  Change-Id: I78086fbc524ac733b8f7f78cb423c91075fd489b

2016-11-14 18:18 +0000 [5c89604a32]  Joshua Colp <jcolp@digium.com>

	* res_format_attr_opus: Fix crash when fmtp contains spaces.

	  When an opus offer or answer was received that contained an
	  fmtp line with spaces between the attributes the module would
	  fail to properly parse it and crash due to recursion.

	  This change makes the module handle the space properly and
	  also removes the recursion requirement.

	  ASTERISK-26579

	  Change-Id: I01f53e5d9fa9f1925a7365f8d25071b5b3ac2dc3

2016-12-06 14:54 +0000 [79b09b5f18]  George Joseph <gjoseph@digium.com>

	* res_pjsip_registrar: AMI Add RegistrationInboundContactStatuses command

	  The PJSIPShowRegistrationsInbound AMI command was just dumping out
	  all AORs which was pretty useless and resource heavy since it had
	  to get all endpoints, then all aors for each endpoint, then all
	  contacts for each aor.

	  PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail
	  events which meets the intended purpose of the other command and has
	  significantly less overhead.  Also, some additional fields that were
	  added to Contact since the original creation of the ContactStatusDetail
	  event have been added to the end of the event.

	  For compatibility purposes, PJSIPShowRegistrationsInbound is left
	  intact.

	  ASTERISK-26644 #close

	  Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a

2016-12-07 14:22 +0000 [3b6e6cd01c]  snuffy <snuffy22@gmail.com>

	* tests_dns: Make DNS tests older nameser.h compatible

	  Fix the tests for DNS to use older style nameser.h as
	  in ASTERISK-26608.

	  Tested on: OpenBSD 6.0, Debian 8

	  ASTERISK-26647 #close

	  Change-Id: I285913c44202537c04b3ed09c015efa6e5f9052d

2016-12-06 16:45 +0000 [76d52dc228]  Richard Mudgett <rmudgett@digium.com>

	* Bundled pjproject:  Fix finding SIP transactions.

	  Occasionally SIP message transactions are not found when they should be.
	  In the particular case an incoming INVITE transaction is CANCELed but the
	  INVITE transaction cannot be found so a 481 response is returned for the
	  CANCEL.  The problematic calls have a '_' character in the Via branch
	  parameter.

	  The problem is in the pjproject PJ_HASH_USE_OWN_TOLOWER feature's code.
	  The problem with the "own tolower" code is that it does not calculate the
	  same hash value as when the pj_tolower() function is used.  The "own
	  tolower" code will erroneously modify the ASCII characters '@', '[', '\\',
	  ']', '^', and '_'.  Calls to pj_hash_calc_tolower() can use the
	  PJ_HASH_USE_OWN_TOLOWER substitute algorithm when enabled.  Calls to
	  pj_hash_get_lower(), pj_hash_set_lower(), and pj_hash_set_np_lower() call
	  find_entry() which never uses the PJ_HASH_USE_OWN_TOLOWER algorithm.  As a
	  result you may not be able to find a hash tabled entry because the
	  calculated hash values would differ.

	  * Simply disable PJ_HASH_USE_OWN_TOLOWER.

	  ASTERISK-26490 #close

	  Change-Id: If89bfdb5f301b8b685881a9a2a6e0c3c5af32253

2016-12-01 16:49 +0000 [503006123a]  Mark Michelson <mmichelson@digium.com>

	* http: Send headers and body in one write.

	  This is a semi-regression caused by the iostreams change. Prior to
	  iostreams, HTTP headers were written to a FILE handle using fprintf.
	  Then the body was written using a call to fwrite(). Because of internal
	  buffering, the result was that the HTTP headers and body would be sent
	  out in a single write to the socket.

	  With the change to iostreams, the HTTP headers are written using
	  ast_iostream_printf(), which under the hood calls write(). The HTTP body
	  calls ast_iostream_write(), which also calls write() under the hood.
	  This results in two separate writes to the socket.

	  Most HTTP client libraries out there will handle this change just fine.
	  However, a few of our testsuite tests started failing because of the
	  change. As a result, in order to reduce frustration for users, this
	  change alters the HTTP code to write the headers and body in a single
	  write operation.

	  ASTERISK-26629 #close
	  Reported by Joshua Colp

	  Change-Id: Idc2d2fb3d9b3db14b8631a1e302244fa18b0e518

2016-12-06 10:56 +0000 [bf6423a336]  Mark Michelson <mmichelson@digium.com>

	* Iostreams: Correct off-by-one error.

	  ast_iostream_printf() attempts first to use a fixed-size buffer to
	  perform its printf-like operation. If the fixed-size buffer is too
	  small, then a heap allocation is used instead. The heap allocation in
	  this case was exactly the length of the string to print. The issue here
	  is that the ensuing call to vsnprintf() will print a NULL byte in the
	  final space of the string. This meant that the final character was being
	  chopped off the string and replaced with a NULL byte. For HTTP in
	  particular, this caused problems because HTTP publishes the expected
	  Contact-Length. This meant HTTP was publishing a length one character
	  larger than what was actually present in the message.

	  This patch corrects the issue by adding one to the allocation length.

	  ASTERISK-26629
	  Reported by Joshua Colp

	  Change-Id: Ib3c5f41e96833d0415cf000656ac368168add639

2016-12-06 12:06 +0000 [fe9f070885]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Fix missing inclusion of symbols

	  Added back in a -g3, and an -O3 when DONT_OPTIMIZE is not set, to
	  the CFLAGS.  Not sure how they went missing.

	  Also fixed an uninstall problem where we weren't removing the
	  symlink from libasteriskpj.so.2 to libasteriskpj.so.  While I was
	  there, I fixed it for libasteriskssl as well.

	  Change-Id: I9e00873b1e9082d05b5549d974534b48a2142556

2016-11-30 18:25 +0000 [4b3d3fc741]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Filter redundant statsd reporting.

	  Increasing the testsuite shutdown timeout before forcibly killing
	  Asterisk allowed more events to be sent out.  Some tests failed as
	  a result.  The tests/channels/pjsip/statsd/registrations failed
	  because we now get the statsd events that a comment in the test
	  configuration stated couldn't be intercepted.  Unfortunately, we
	  get a variable number of events because of internal status state
	  transition races generating redundant statsd events.

	  We were reporting redundant statsd PJSIP.registrations.state changes
	  for internal state changes that equated to the same thing publicly.

	  * Made update_client_state_status() filter out redundant statsd
	  updates.

	  ASTERISK-26527

	  Change-Id: If851c7d514bb530d9226e4941ba97dcf52000646

2016-06-28 16:26 +0000 [26c8552fff]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* OpenSSL 1.1.0 support

	  OpenSSL 1.1.0 includes some major changes in the interface. See
	  https://wiki.openssl.org/index.php/1.1_API_Changes .

	  Status: Right now there are still a few deprecation notes with OpenSSL
	  1.1.0. But it's a start.

	  Changes:
	  * CRYPTO_LOCK is no longer available. Replace it with its value for now.
	    I don't completely understand what it is used for there.
	  * Remove several functions from libasteriskssl that seem to no longer be
	    needed.
	  * Structures have become opaque and are accesses with accessors.
	  * ERR_remove_thread_state() no longer needed.
	  * SSLv2 code now could no longer be used in 1.1.

	  ASTERISK-26109 #close

	  Change-Id: I5e29d477d486ca29b6aae0dc2f5dff960c1cb82b

2016-11-22 11:20 +0000 [75230f4c01]  Guido Falsi <mad@madpilot.net>

	* res_rtp: Fix regression when IPv6 is not available.

	  The latest Release candidate fails to create RTP streams when IPv6
	  is not available. Due to the changes made in September the ast_sockaddr
	  structure passed around to create these streams is always of AF_INET6
	  type, causing failure when used for IPv4. This patch adds a utility
	  function to check for availability of IPv6 and applies such check
	  at startup to determine how to create the ast_sockaddr structures.

	  ASTERISK-26617 #close

	  Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e

2016-11-23 18:27 +0000 [1dfa11b65c]  Richard Mudgett <rmudgett@digium.com>

	* PJPROJECT logging: Made easier to get available logging levels.

	  Use of the new logging is as simple as issuing the new CLI command or
	  setting the new pjproject.conf option.

	  Other options that can affect the logging are how you have the pjproject
	  log levels mapped to Asterisk log types in pjproject.conf and if you have
	  configured Asterisk to log the DEBUG type messages.  Altering the
	  pjproject.conf level mapping shouldn't be necessary for most installations
	  as the default mapping is sensible.  Configuring Asterisk to log the DEBUG
	  message type is standard practice for collecting debug information.

	  * Added CLI "pjproject set log level" command to dynamically adjust the
	  maximum pjproject log message level.

	  * Added CLI "pjproject show log level" command to see the currently set
	  maximum pjproject log message level.

	  * Added pjproject.conf startup section "log_level" option to set the
	  initial maximum pjproject log message level so all messages could be
	  captured from initialization.

	  * Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
	  bundled pjproject.  Pjproject will use the currently set run time log
	  level to determine if a log message is generated just like Asterisk
	  verbose and debug logging levels.

	  * In log_forwarder(), made always log enabled and mapped pjproject log
	  messages.  DEBUG mapped log messages are no longer gated by the current
	  Asterisk debug logging level.

	  * Removed RAII_VAR() from res_pjproject.c:get_log_level().

	  ASTERISK-26630 #close

	  Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389

2016-11-30 10:48 +0000 [621d886ca7]  Mark Michelson <mmichelson@digium.com>

	* Frame deferral: Re-queue deferred frames one-at-a-time.

	  The recent change that made frame deferral into an API had a behavior
	  change to it. When frame deferral was completed, we would take all of
	  the deferred frames and queue them all onto the channel in one call to
	  ast_queue_frame_head(). Before frame deferral was API-ized, places that
	  performed manual frame deferral would actually take each deferred frame
	  and queue them onto the channel.

	  This change in behavior caused the confbridge_recording test to start
	  failing consistently. Without going too crazily deep into the details,
	  a channel was getting "stuck" in an ast_safe_sleep(). An AMI redirect
	  was attempting to break it out of the sleep, but because there were more
	  frames in the channel read queue than expected, the channel ended up
	  being unable to break from its sleep loop.

	  By restoring the behavior of individual frame queuing after deferral,
	  the test starts passing again.

	  Note, this points to a potential underlying issue pointing to an
	  "unbalance" that can occur when queuing multiple frames at once,
	  and so a follow-up issue is being created to investigate that
	  possibility.

	  Change-Id: Ied5dacacda06d343dea751ed5814a03364fe5a7d

2016-11-15 15:01 +0000 [e5e887be53]  Alexei Gradinari <alex2grad@gmail.com>

	* chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no

	  The sending codec is switched to the receiving codec and then
	  is switched back to the best native codec on EVERY receiving RTP packets.
	  This is because after call of ast_channel_set_rawwriteformat there is call
	  of ast_set_write_format which calls set_format which sets rawwriteformat
	  to the best native format.

	  This patch adds a new function ast_set_write_format_path which set
	  specific write path on channel and uses this function to switch
	  the sending codec.

	  ASTERISK-26603 #close

	  Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d

2016-11-21 15:43 +0000 [ddc951060a]  David Kerr <david@kerr.net>

	* app_originate: Add option to execute gosub prior to dial

	  Issue/patch ASTERISK-26587 was inspired by issue ASTERISK-22992
	  that requested ability to add callerid into app_originate.
	  Comments in that issue suggested that it was better solved by
	  adding an option to gosub prior to originating the call.  The
	  attached patch implements this much like app_dial with two
	  options one to gosub on the originating channel and one to gosub
	  on the newly created channel and behaves just like app_dial.
	  I have tested this patch by adding callerid info to the new
	  channel and also SIPAddHeader (to e.g. add header to force auto
	  answer) and confirmed it works.  Have also tested both 'exten'
	  and 'app' versions of app_originate.

	  Opened by: dkerr
	  Patch by: dkerr

	  Change-Id: I36abc39b58567ffcab4a636ea196ef48be234c57

2016-11-28 19:43 +0000 [0e214c4932]  Eduardo S. Libardi <eslibardi@gmail.com>

	* res_calendar_caldav: Add support reading gmail calendar

	  The response from gmail calendar includes the string name
	  "caldav:calendar-data". res_calendar_caldav implements
	  the example included in RFC 4791: string "C:calendar-data".
	  When reading the calendar, res_calendar_caldav compare the
	  string and if does not match just discards the event.
	  This commit compares the response to both strings,
	  successfully loading gmail calendar events.
	  Writing to gmail calendar is working prior to this fix.

	  ASTERISK-26624
	  Reported by: Eduardo S. Libardi

	  Change-Id: Ia1eef10552ae616efb645d390f5ffe81260d7d4a

2016-11-28 15:12 +0000 [a3f48be0da]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip: Fix documentation whitespace issues

	  Tabs > Spaces.

	  Change-Id: If1e43a71822615a898e958e0f8b2e882606f0bd0

2016-11-22 10:27 +0000 [0e15760795]  Matt Jordan <mjordan@digium.com>

	* res_pjsip/chan_sip: Advertise 'ws' in the SIP URI transport parameter

	  Per RFC 7118 5.2, the SIP URI 'transport' parameter should advertise
	  'ws' when WebSockets are to be used as the transport. This applies to
	  both secure and insecure WebSockets.

	  There were two bugs in Asterisk with respect to this:

	  (1) The most egregious occurs in res_pjsip. There, we advertise 'ws' for
	      insecure websockets and 'wss' for secure websockets. While this
	      would seem to make sense - since 'WS' and 'WSS' are used for the Via
	      Transport parameter - this is not the case for the SIP URI. This
	      patch corrects that by registering the secure websockets with
	      pjproject using the shorthand 'WS', and by returning 'ws' when asked
	      for the transport parameter. Note that in pjproject, it is perfectly
	      valid to have multiple transports use the same shorthand.

	  (2) In chan_sip, we return an upper-case version of the transport 'WS'
	      instead of 'ws'. Since we should be strict in what we send and
	      liberal in what we accept (within reason), this patch lower-cases
	      the transport before appending it to the parameter.

	  ASTERISK-24330 #close
	  Reported by: cervajs, Inaki Baz Castillo

	  Change-Id: Iff77b645f8cc3b7cd35168a6676c26b147f22f42

2016-11-28 11:03 +0000 [8a68289766]  George Joseph <gjoseph@digium.com>

	* build_tools:  Fix download_externals to handle certified branches

	  download_externals wasn't handling the "certified/13.x" version
	  correctly.

	  Change-Id: I124d195bb117ca36fd7bf1150c630f3b474a9d9a

2016-11-28 07:36 +0000 [e3dae763ee]  Joshua Colp <jcolp@digium.com>

	* iostream: Move include of asterisk.h

	  The asterisk.h header file needs to be included first or else
	  some things go awry, such as:

	  implicit declaration of function 'vasprintf'

	  Change-Id: I981dc2a77a1ba791888e4f1726644d4656c0407c

2016-11-26 10:57 +0000 [0b588778c0]  Michael Kuron <m.kuron@gmx.de>

	* chan_sip: Fix segfault during module unload

	  If a TCP/TLS connection was pending (not accepted and not timed out) during
	  unload of chan_sip, Asterisk would segfault when trying to send a signal to
	  a thread whose thread ID hadn't been recorded yet. This commit fixes that by
	  recording the thread ID before calling the blocking connect() syscall.
	  This was a regression introduced by 776a14386a55b5425c7e9617eff8af8b45427144.

	  The above wasn't enough to fix the segfault, which was now delayed to the
	  point where connect() timed out. Therefore, it was necessary to also remove
	  the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be
	  used to interruput the connect() syscall.
	  This was a regression introduced by 5d313f51b982a18f7321adcf7c7a4e822d8b2714.

	  ASTERISK-26586 #close

	  Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b

2016-11-23 14:52 +0000 [ead773f801]  Dennis Guse <dennis.guse@alumni.tu-berlin.de>

	* pbx_lua: On configuration errors report module load failure instead of decline.

	  Switched from AST_MODULE_LOAD_DECLINE to AST_MODULE_LOAD_FAILURE.
	  Therefore, if pbx_lua fails to load and pbx_lua is marked as required,
	  Asterisk exits as expected.
	  If extensions.lua cannot be opened, AST_MODULE_LOAD_DECLINE is reported.

	  Change-Id: I8e5a0037e69b41743db60c568541ebb2f52a7a8f

2016-11-11 08:16 +0000 [d9b24cce0a]  gestoip2 <gestoip2@ull.edu.es>

	* res_rtp_asterisk: RTT miscalculation in RTCP

	  When retrieving RTCP stats for PJSIP channels, RTT values are unreliable.
	  RTT calculation is correct, but the data representation isn't.  RTT is
	  represented by a 32-bit fixed-point number with the integer part in the
	  first 16 bits and the fractional part in the last 16 bits.  In order to
	  get the RTT value, the fractional part is miscalculated, there is an
	  unnecessary 16 bit shift that causes overflow.  Besides this there is
	  another mistake, when transforming the integer value to the fixed point
	  fractional part via bitwise operation, that loses precision.

	  * RTT fractional part is no longer shifted, avoiding overflow.

	  * RTT fractional part is transformed to its fixed-point value more
	  precisely.

	  * Fixed timeval2ntp() and ntp2timeval() second fraction conversions.

	  * Fixed NTP timestamp report logging.  The usec was inexplicably
	  multiplied by 4096.

	  ASTERISK-26566 #close
	  Reported by Hector Royo Concepcion

	  Change-Id: Ie09bdabfee75afb3f1b8ddfd963e5219ada3b96f

2016-11-15 13:44 +0000 [635b0a0a55]  Michael Kuron <m.kuron@gmx.de>

	* tcptls: Use new certificate upon sip reload

	  Previously, a TLS server socket would only be restarted upon sip reload if the
	  bind address had changed. This commit adds checking for changes to TLS
	  parameters like certificate, ciphers, etc. so they get picked up without
	  requiring a reload of the entire chan_sip module. This does not affect open
	  connections in any way, but new connections will use the new TLS parameters.
	  The changes also apply to HTTP and Manager.

	  ASTERISK-26604 #close

	  Change-Id: I169e86cefc6dcd627c915134015a6a1ab1aadbe6

2016-11-21 09:49 +0000 [abae3dc36e]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Use $(LIB_RT) for link of libasteriskpj

	  libasteriskpj was hard coded to use -lrt but librt is linux specific
	  so we now use the LIB_RT variable which gets set by configure.

	  Change-Id: I41148884517e3031f7675a413d524c86e8614694

2016-11-19 16:19 +0000 [b546497fe0]  snuffy <snuffy22@gmail.com>

	* Add support for older name resolving version libraries like openBSD

	  Fix support of OS's like openBSD that use an older nameser.h,
	  this change reverts the defines to the older style which on other
	  systems is found in nameser_compat.h

	  Tested on openBSD 6.0, Debian 8

	  ASTERISK-26608 #close

	  Change-Id: Iffb36caab8c5aa9dece0ce2d009041f7b56cc86a

2016-11-18 09:46 +0000 [7a8d6bc81b]  Mark Michelson <mmichelson@digium.com>

	* Bump ARI version to 2.0.0

	  In order to not have version number overlap between different versions
	  of Asterisk, each new major version of Asterisk will mean we also bump
	  the ARI major version number.

	  This particular change does NOT introduce any known breaking changes to
	  ARI.

	  For discussion relating to this topice, see:
	  http://lists.digium.com/pipermail/asterisk-dev/2016-November/075964.html

	  Change-Id: I712ee0df177a8fe1252da2bc029705268b97b665

2016-11-16 12:05 +0000 [d3f070c7a2]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Improve reliability of pjproject download

	  The download process now has a timeout which will cause wget to retry
	  if it stops retrieving data for 5 seconds and fetch and curl to timeout
	  if the whole retrieval take smore than 30 seconds.

	  If the tarball retrieval works, the MD5SUM file is retrieved from
	  the downloads site and the md5 checksum is verified.

	  If either the tarball retrieval or MD5SUM retrieval fails, or the
	  checksums don't match, the entire process is retried once.  If it
	  fails again, any incomplete tarball is deleted.

	  .DELETE_ON_ERROR: was also added to the Makefile.  Not only does
	  this delete the tarball on failure, it till also delete corrupted
	  library files from the pjproject source directory should they
	  fail to build correctly.

	  Tested all the way back to FreeBSD 9, CentOS 6, Debian 6 and
	  Ubuntu 14.

	  Change-Id: Iea7d33b96a31622ab1b6e54baebaf271959514e1

2016-11-11 07:13 +0000 [e822a50f86]  Mikheili Dautashvili <mishadaut@gmail.com>

	* main/app.c: Transmit Silence on ControlPlayback pause

	  ASTERISK-26562 #close

	  Change-Id: Ie6cb0ffc2b8c775639ce7784fe96f4ea00cfa2f8

2016-11-17 10:52 +0000 [d670ea6297]  Mark Michelson <mmichelson@digium.com>

	* manager: update minor version

	  Based on bridge video AMI event changes, bump the minor version of AMI.

	  Change-Id: Idf84507354170400813cda780906c94c9f1b60b4

2016-11-17 08:25 +0000 [349e08cb48]  Timo Teräs <timo.teras@iki.fi>

	* codec_dahdi: Fix poll.h include.

	  POSIX defines poll.h. sys/poll.h should not be used as it is c-library
	  internal header which may or may not exist. Notably in musl including
	  sys/poll.h generates warning of being incorrect.

	  Change-Id: Ib318c1c7142a737bcf3caa4d8d72560bebe39252

2016-11-16 20:24 +0000 [935f5d003b]  George Joseph <gjoseph@digium.com>

	* build:  Various OpenBSD issues

	  OpenBSD's 'find' doesn't take the -delete argument so you have to pipe
	  through 'xargs rm -rf'.

	  'echo -e' doesn't like \t starting a line. It just prints 't' which
	  causes the libasteriskpj.exports file to be garbage.  They were just
	  cosmetic so they were removed.

	  librt doesn't exist so the link of libasteriskpj.so fails. It's not
	  actually needed for linux anyway so -lrt was removed from the link.

	  res_rtp_asterisk was failing to load because of an undefined
	  DTLS_method. '|| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if
	  so DTLSv1_method is used instead.

	  ASTERISK-26608

	  Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c

2016-11-16 15:42 +0000 [dc8f99ee27]  Mark Michelson <mmichelson@digium.com>

	* res_format_attr_opus: Fix fmtp generation.

	  res_format_attr_opus assumed that the string being passed into it was
	  empty. It tried to determine if the only thing it had written was

	  a=fmtp:<num>

	  And if it had, it would reset the string. Its calculation was off when
	  working with chan_sip, though. chan_sip passes the entire built SDP
	  rather than an empty string. This resulted in always putting an empty
	  fmtp line in the SDP.

	  ASTERISK-26520 #close
	  Reported by scgm11

	  Change-Id: Ib2e8712d26a47067e5f36d5973577added01dbb5

2016-11-15 16:23 +0000 [ed9ced0531]  Richard Mudgett <rmudgett@digium.com>

	* codec_opus: Fix warning when Opus negotiated but codec_opus not loaded.

	  When Opus is negotiated but not loaded, the log is spammed with messages
	  because the system does not know how to calculate the number of samples in
	  a frame.

	  * Suppress the warning by supplying a function that assumes 20ms of
	  samples in the frame.  For pass through support it doesn't really seem to
	  matter what number of samples is returned anyway.

	  ASTERISK-26605 #close

	  Change-Id: Icf2273692f040dc2c45b01e72a790d11092f9e0f

2016-11-14 14:36 +0000 [0cd0e70c16]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_authenticator_digest.c: Fix memory pool leak.

	  Responding to authentication challenges leaks PJSIP memory pools.

	  The leak was introduced with a pjproject 2.5.5 API change.
	  https://trac.pjsip.org/repos/ticket/1929 changed the API usage of
	  pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to
	  clean up cached authentication allocations that get allocated with
	  pjsip_auth_clt_reinit_req().

	  ASTERISK-26516 #close

	  Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8

2016-11-15 12:01 +0000 [3017f09f22]  George Joseph <gjoseph@digium.com>

	* file.c/__ast_file_read_dirs:  Fix issues on filesystems without d_type

	  One of the code paths in __ast_file_read_dirs will only get executed if
	  the OS doesn't support dirent->d_type OR if the filesystem the
	  particular file is on doesn't support it.  So, while standard Linux
	  systems support the field, some filesystems like XFS do not.  In this
	  case, we need to call stat() to determine whether the directory entry
	  is a file or directory so we append the filename to the supplied
	  directory path and call stat.  We forgot to truncate path back to just
	  the directory afterwards though so we were passing a complete file name
	  to the callback in the dir_name parameter instead of just the directory
	  name.

	  The logic has been re-written to only create a full_path if we need to
	  call stat() or if we need to descend into another directory.

	  Change-Id: I54e4228bd8355fad65200c6df3ec4c9c8a98dfba

2016-06-02 14:10 +0000 [070a51bf7c]  Timo Teräs <timo.teras@iki.fi>

	* Implement internal abstraction for iostreams

	  fopencookie/funclose is a non-standard API and should not be used
	  in portable software. Additionally, the way FILE's fd is used in
	  non-blocking mode is undefined behaviour and cannot be relied on.

	  This introduces internal abstraction for io streams, that allows
	  implementing the desired virtualization of read/write operations
	  with necessary timeout handling.

	  ASTERISK-24515 #close
	  ASTERISK-24517 #close

	  Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85

2016-11-15 08:07 +0000 [d3b61a98f4]  Joshua Colp <jcolp@digium.com>

	* manager: Bump AMI version number.

	  During the development of Asterisk 14 the behavior of
	  the Command AMI action was altered such that the result
	  was returned on lines with a prefix of "Output: ". While
	  this was documented in the UPGRADE.txt file it is also
	  reasonable that this should bump the AMI version number.

	  ASTERISK-26556

	  Change-Id: Idf1bf01608e53f7bfdf43ddb4d0683e53f74ee42

2016-11-14 15:57 +0000 [edd7ae85e8]  Matt Jordan <mjordan@digium.com>

	* pjproject: Use a much higher limit for PJ_ICE_MAX_CHECKS

	  The PJ_ICE_MAX_CHECKS constant is used by pjproject to determine how
	  many pairs of local/remote candidates will be made. If for some reason
	  we reach this upper bound, ICE will generally fail and no media will
	  flow between the browser and Asterisk.

	  This patch makes PJ_ICE_MAX_CHECKS set to the total possible number of
	  pairs of candidates we'd theoretically allow, which is
	  PJ_ICE_MAX_CAND^2. Prior to this patch, we simply multiplied
	  PJ_ICE_MAX_CAND by two; on systems with multiple interfaces (I blame
	  Docker), this is far too low to allow WebRTC calls to succeed.

	  Setting this to be PJ_ICE_MAX_CAND^2 allowed WebRTC calls to succeed
	  even when the system Asterisk was running on had quite a few virtual
	  interfaces.

	  Change-Id: Icd4f17de0ac9d3a83dddfc8bf1cb7616bc107d55

2016-11-14 15:32 +0000 [cc86329228]  Matt Jordan <mjordan@digium.com>

	* apps/app_echo: Only relay a single video source change frame

	  In 9785e8d0, app_echo was updated to relay video source updates to the
	  channel for the purposes of displaying video in WebRTC tests.
	  Unfortunately, this can cause a Kafkaesque nightmare if two or more
	  Local channels are in a bridge together where their ends are in
	  app_echo. When this situation occurs, a video update sent into app_echo
	  will cause the video update to be relayed to the other Local channels,
	  causing another round of video updates, etc. In not much time at all,
	  the channel length queues will be overwhelmed, channel alert pipes will
	  fail, and all hell will break loose as Asterisk merrily continues to
	  throw more video update requests onto the channels.

	  This patch updates app_echo to *only* relay a single video update. Once
	  a video update has been made, all further video updates are dropped.
	  This meets the intended purpose of the original patch: if we get a video
	  update and we're in app_echo, go ahead and ask the sender to update
	  themselves. However, once we've got that video stream sync'd up, don't
	  keep spamming the world.

	  Change-Id: I9210780b08d4c17ddb38599d1c64453adfc34f74

2016-11-08 10:11 +0000 [a72ef38113]  Matt Jordan <mjordan@digium.com>

	* res/ari/resource_bridges: Add the ability to manipulate the video source

	  In multi-party bridges, Asterisk currently supports two video modes:
	   * Follow the talker, in which the speaker with the most energy is shown
	     to all participants but the speaker, and the speaker sees the
	     previous video source
	   * Explicitly set video sources, in which all participants see a locked
	     video source

	  Prior to this patch, ARI had no ability to manipulate the video source.
	  This isn't important for two-party bridges, in which Asterisk merely
	  relays the video between the participants. However, in a multi-party
	  bridge, it can be advantageous to allow an external application to
	  manipulate the video source.

	  This patch provides two new routes to accomplish this:
	  (1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId}
	      Sets a video source to an explicit channel
	  (2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource
	      Removes any explicit video source, and sets the video mode to talk
	      detection

	  ASTERISK-26595 #close

	  Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621

2016-11-14 14:03 +0000 [7263a17ca0]  George Joseph <gjoseph@digium.com>

	* channel:  Fix issues in hangup scenarios caused by frame deferral

	  ASTERISK-26343

	  Change-Id: I06dbf7366e26028251964143454a77d017bb61c8
	  (cherry picked from commit 0be46aaf6b8b9eb5b0160ec591cdc2c6e1802a6d)

2016-11-14 13:55 +0000 [0dc4567133]  George Joseph <gjoseph@digium.com>

	* Revert "Revert "channel: Use frame deferral API for safe sleep.""

	  This reverts commit e5365dada5052b87275c048f6e29ac7d5e2b2415.

	  Change-Id: Icc40cf0c7687454760762912dd29e4ae79e8e9ee

2016-11-14 13:55 +0000 [6d61f7bfd1]  George Joseph <gjoseph@digium.com>

	* Revert "Revert "autoservice: Use frame deferral API""

	  This reverts commit edca6911f392f47c1a5a25d1d3a357c72b04a78a.

	  Change-Id: I76030b87333a2c390cd05392b74b75678d78ddfa

2016-11-14 13:55 +0000 [f62c9c42fa]  George Joseph <gjoseph@digium.com>

	* Revert "Revert "AGI: Only defer frames when in an interception routine.""

	  This reverts commit 6bce938c2fcb60b7a77a0e997a6518860c0bfa39.

	  Change-Id: Iadbf462bf2a52e8b2fa9ebc75b37b1f688ba51d9

2016-11-14 13:54 +0000 [2966fa5ad7]  George Joseph <gjoseph@digium.com>

	* Revert "Revert "Add API for channel frame deferral.""

	  This reverts commit fa749866c17f91860d3e9f89742eab3e6f03ecbc.

	  Change-Id: Idcd1b88fa0766b1326dcc87d8905dbc314c71bd7

2016-11-11 10:45 +0000 [c6d755de11]  Sebastien Duthil <sduthil@proformatique.com>

	* res_ari: Add support for channel variables in ARI events.

	  This works the same as for AMI manager variables. Set
	  "channelvars=foo,bar" in your ari.conf general section, and then the
	  channel variables "foo" and "bar" (along with their values), will
	  appear in every Stasis websocket channel event.

	  ASTERISK-26492 #close
	  patches:
	    ari_vars.diff submitted by Mark Michelson

	  Change-Id: I5609ba239259577c0948645df776d7f3bc864229

2016-11-14 12:16 +0000 [72da2ef9ff]  George Joseph <gjoseph@digium.com>

	* cli:  Fix ast_el_read_char to work with libedit >= 3.1

	  Libedit 3.1 is not build with unicode on as a default and so the
	  prototype for the el_gets callback changed from expecting a char buffer
	  to accepting a wchar buffer.  If ast_el_read_char isn't changed,
	  the cli reads garbage from teh terminal.

	  Added a configure test for (*el_rfunc_t)(EditLine *, wchar_t *) and
	  updated ast_el_read_char to use the HAVE_ define to detemrine whether
	  to use char or wchar.

	  ASTERISK-26592 #close

	  Change-Id: I9099b46f68e06d0202ff80e53022a2b68b08871a

2016-11-12 12:15 +0000 [97a75e3829]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Add support for building RADIUS with radcli

	  Radcli is yet another RADIUS client library, generally compatible with
	  freeradius and radiusclient-ng.

	  This commit adds autoconf option for detecting it as well and changes
	  cdr_radius and cel_radius to use its header file in that case.

	  ASTERISK-26540 #close

	  Change-Id: I271f0715406334874865ffbce0b354b3a2ca148f

2016-11-10 10:57 +0000 [1bd49040c4]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Reject offer of required SRTP without res_srtp.

	  When optimistic SRTP was on it was possible for us to still
	  set up a call without an audio stream if an offer was received
	  with required SRTP.

	  This change makes it so this scenario will now fail with a 488
	  response.

	  ASTERISK-26575

	  Change-Id: I7d14187037681f48879bd20319ac79d0877318f3

2016-11-11 02:41 +0000 [dfb951817f]  Igor Goncharovskiy <igor.goncharovsky@gmail.com>

	* Fix closing rtp ports after call finished in chan_unistim.

	  Fix ASTERISK-26565 by adding ast_rtp_instance_stop before
	  rtp instance destroy for chan_unistim. Also several fixes
	  for displayed text translation.

	  Change-Id: If42a03eea09bd1633471406bdc829cf98bf6affc

2016-11-11 00:29 +0000 [939dcf66b0]  Timo Teräs <timo.teras@iki.fi>

	* addons/chan_mobile: do not use strerror_r

	  The two reasons why it might be used are that some systems do not
	  implement strerror in thread safe manner, and that strerror_r returns
	  the error code in the string in case there's no error message.

	  However, all of asterisk elsewhere uses strerror() and assumes it
	  to be thread safe. And in chan_mobile the errno is also explicitly
	  printed so neither of the above reasons are valid.

	  The reasoning to remove usage is that there are actually two versions
	  of strerror_r: XSI and GNU. They are incompatible in their return
	  value, and there's no easy way to figure out which one is being
	  used. glibc gives you the GNU version if _GNU_SOURCE is defined,
	  but the same feature test macro is needed for other symbols. On
	  all other systems you assumedly get XSI symbol, and compilation warnings
	  as well as non-working error printing.

	  Thus the easiest solution is to just remove strerror_r and use
	  strerror as rest of the code. Alternative is to introduce ast_strerror
	  in separate translation unit so it can request the XSI symbol in
	  glibc case, and replace all usage of strerror.

	  Change-Id: I84d35225b5642d85d48bc35fdf399afbae28a91d

2016-09-23 17:54 +0000 [338f35edcc]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Rework endpt_send_request() req_wrapper code.

	  * Don't hold the req_wrapper lock too long in endpt_send_request().  We
	  could block the PJSIP monitor thread if the timeout timer expires.
	  sip_get_tpselector_from_endpoint() does a sorcery access that could take
	  awhile accessing a database.  pjsip_endpt_send_request() might take awhile
	  if selecting a transport.

	  * Shorten the time that the req_wrapper lock is held in the callback
	  functions.

	  * Simplify endpt_send_request() req_wrapper->timeout code.

	  * Removed some redundant req_wrapper->timeout_timer->id assignments.

	  Change-Id: I3195e3a8e0207bb8e7f49060ad2742cf21a6e4c9

2016-09-21 15:10 +0000 [bb196323f9]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix tdata leaks in off nominal paths.

	  Change-Id: Ie83e06e88c2d60157775263b07e40b61718ac97b

2016-10-24 12:41 +0000 [9df59d9ff4]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_registrar_expire.c: Remove extra linefeed in debug message.

	  Change-Id: I1f9adb911f23376503396ec8867e8005b755eb94

2016-11-10 13:38 +0000 [73524bde9c]  C.J. Collier <cjcollier@linuxfoundation.org>

	* chan_sip: Fix typo and re-wrap surrounding docs

	  Correct typo of end-pints to end-points
	  Re-wrap session timer parameter docs to max 80 chars wide; this
	  eases reading on terminals with lower resolution, commonly the case
	  for those with visual impairments.

	  ASTERISK-26573

	  Change-Id: I22c94459f4bb6b8a2f6713cfd22e87c32f204e6b
	  Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>

2016-11-09 15:14 +0000 [bdb6d928c5]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Perform resolution when explicit IPv6 transport is used.

	  This change fixes the SIP resolver such that if an IPv6 transport
	  is explicitly used it will resolve NAPTR, SRV, and AAAA records.

	  You can explicitly use one by specifying it on an endpoint.

	  ASTERISK-26571

	  Change-Id: I2ed3ce81b43a6a8a937c0ebc1b8ed2da5ac2ef36

2016-11-10 08:33 +0000 [93a0de1f0e]  Joshua Colp <jcolp@digium.com>

	* app_queue: Add mention of 'ABANDON' variable to CHANGES.

	  ASTERISK-26558

	  Change-Id: I1127010181e79c8ac291f72f036cb8e430dc7f7e

2016-11-10 07:34 +0000 [fa749866c1]  George Joseph <gjoseph@digium.com>

	* Revert "Add API for channel frame deferral."

	  This reverts commit f073f648b87d45e4729969fd2d83695c300757d1.
	  Multiple testsuite failures were detected after the fact.

	  Change-Id: I968c380418bf65c7166f6ecff30fe8e247ea6682

2016-11-10 07:33 +0000 [6bce938c2f]  George Joseph <gjoseph@digium.com>

	* Revert "AGI: Only defer frames when in an interception routine."

	  This reverts commit 28926d1c81540bbeb16802814d3f2e63c2347bd2.
	  Multiple testsuite failures were detected after the fact.

	  Change-Id: I8d4f5ccbb421a351d616254844ae7e5a31053edb

2016-11-10 07:32 +0000 [edca6911f3]  George Joseph <gjoseph@digium.com>

	* Revert "autoservice: Use frame deferral API"

	  This reverts commit afef1b8e4a311d33b3e485b9bab3c6e7fd13fbc9.
	  Multiple testsuite failures were detected after the fact.

	  Change-Id: Ib4cb0c0a6475681ce817f71b4050be25640ab67f

2016-11-10 07:31 +0000 [e5365dada5]  George Joseph <gjoseph@digium.com>

	* Revert "channel: Use frame deferral API for safe sleep."

	  This reverts commit 392202304d248147378f1e16f1f012285dc1221f.

	  Multiple testsuite issues were discovered after the fact.

	  Change-Id: I848c4196dca2994b1a368087004326ea354cff95

2016-11-09 18:18 +0000 [edea41126b]  George Joseph <gjoseph@digium.com>

	* build:  Fix default values for some SANITIZER options

	  2 of the sanitizers didn't have default values so in systems that
	  don't support sanitizers menuselect would spit out warnings.  They
	  were harmless but confusing.  They've now been set to "0".

	  Change-Id: I08dc495e3b83f1feac3160b421f538c375fc5d58

2016-11-06 06:04 +0000 [4e8ab6cda9]  Sebastian Gutierrez <sgutierrez@integraccs.com>

	* app_queue: new variable set when abandoned

	  sets the variable ABANDONED to TRUE if the call was not answered.

	  ASTERISK-26558

	  Change-Id: I4729af9bff4eba436d8a776afd3374065d0036d3

2016-11-08 10:48 +0000 [e5860ce07d]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_session: Do not call session supplements when it's too late.

	  res_pjsip_sesssion was hooking into transaction and invite state
	  changes. One of the reasons for doing so was due to the
	  PJSIP_EVENT_TX_MSG event. The idea was that we were hooking into the
	  message sending process, and so we should call session supplements to
	  alter the outgoing message.

	  In reality, this event was meant to indicate that the message either
	  a) had already been sent, or
	  b) required a DNS lookup and would be sent when the DNS query
	  completed.

	  In case (a), this meant we were altering an already-sent
	  request/response for no reason. In case (b), this potentially meant we
	  could be trying to alter a request/response at the same time that the
	  DNS resolution completed. In this case, it meant we might be stomping on
	  memory being used by the thread actually sending the message. This
	  caused potential crashes and memory corruption.

	  This patch removes the calls to session supplements from the case where
	  the PJSIP_EVENT_TX_MSG event occurs. In all of these cases, trying to
	  alter the message at this point is too late, and it can cause nothing
	  but harm to try to do it. Because there were no longer any calls to the
	  handle_outgoing() function, it has been removed.

	  Change-Id: Ibcc223fb1c3a237927f38754e0429e80ee301e92

2016-11-03 16:46 +0000 [392202304d]  Mark Michelson <mmichelson@digium.com>

	* channel: Use frame deferral API for safe sleep.

	  This is another case where manual frame deferral can be replaced with
	  centralized routines instead.

	  Change-Id: I42cdf205f8f29a7977e599751a57efbaac07c30e
	  (cherry picked from commit d149c4b9e07eeb880d8428ad52c6fdb315cc15f5)

2016-11-03 16:46 +0000 [afef1b8e4a]  Mark Michelson <mmichelson@digium.com>

	* autoservice: Use frame deferral API

	  Rather than use manual frame deferral, just let the channel API do it
	  for us.

	  ASTERISK-26343

	  Change-Id: I688386f36e765dbc07be863943a43f26bd5eac49
	  (cherry picked from commit 8ba3e2fc27f9966b8c7ce75c1eca6208613a9315)

2016-11-03 16:42 +0000 [28926d1c81]  Mark Michelson <mmichelson@digium.com>

	* AGI: Only defer frames when in an interception routine.

	  AGI recently was modified to defer important frames. This was because
	  when AGI was used in a connected line interception routine, the
	  resulting connected line frame would end up getting discarded by the
	  AGI.

	  However, this caused bad behavior in other cases. Specifically, during a
	  transfer, if someone attempted to manually set the Caller ID on a
	  channel in an AGI, the deferred connected line frame would end up
	  overwriting what had been manually set in the AGI.

	  Since the initial issue was specific to interception routines, this
	  change removes the manual frame deferral from AGI and instead uses the
	  new frame deferral API in interception routines.

	  ASTERISK-26343 #close
	  Reported by Morton Tryfoss

	  Change-Id: Iab7d39436d0ee99bfe32ad55ef91e9bd88db4208

2016-11-03 16:36 +0000 [f073f648b8]  Mark Michelson <mmichelson@digium.com>

	* Add API for channel frame deferral.

	  There are several places in Asterisk that have duplicated logic
	  for deferring important frames until later.

	  This commit adds a couple of API calls to facilitate this automatically.

	  ast_channel_start_defer_frames(): Future reads of deferrable frames on
	  this channel will be deferred until later.

	  ast_channel_stop_defer_frames(): Any frames that have been deferred get
	  requeued onto the channel.

	  ASTERISK-26343

	  Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641

2016-11-02 10:52 +0000 [d30415bfa1]  Joshua Colp <jcolp@digium.com>

	* res_stasis: Don't unsubscribe from a NULL bridge.

	  A NULL bridge has special meaning in res_stasis for
	  unsubscribing. It means that a subscription to ALL
	  bridges should be removed. This should not be done
	  as part of the normal subscription management in
	  the res_stasis channel loop.

	  ASTERISK-26468

	  Change-Id: I6d5bea8246dd13a22ef86b736aefbf2a39c15af0

2016-11-03 07:42 +0000 [0a698cd932]  Alexander Anikin <may213@yandex.ru>

	* chan_ooh323: Fixes to work right with Cisco devices

	  Changed output packets queue processing algo to one read-one write
	  instead of all read-all send

	  Remove h.245 tunneling parameter from ReleaseComplete packet

	  ASTERISK-24400 #close
	  Reported by: Dmitry Melekhov
	  Tested by: Dmitry Melekhov

	  Change-Id: I0b31933b062a21011dbac9a82b8bcfe345f406f6

2016-11-03 13:10 +0000 [a1cdc3891a]  Alexander Anikin <may213@yandex.ru>

	* chan_ooh323: reset rrq count on gk registration

	  reset registration attempts count on success registration on gatekeeper

	  Change-Id: I5f47351852e0ca76c9ac78421659600e0f106336

2016-11-06 05:40 +0000 [b2b5f9d897]  frahaase <fra.haase@googlemail.com>

	* ast_format: Adds an identifier for interleaved audio formats to the ast_format

	  Adds an identifier (with a getter and setter) to detect channels with
	  interleaved audio.
	  This is needed by the binaural bridge_softmix patch (ASTERISK-26292) and
	  was already discussed here:
	  http://lists.digium.com/pipermail/asterisk-dev/2016-October/075900.html
	  The identifier can be set during fmtp parsing (to be seen in the
	  res_format_attr_opus.c change).

	  ASTERISK-26292

	  Change-Id: I359801cc5f98c35671c48dabc81a7f4ee1183d63

2016-11-06 03:46 +0000 [fbbbd0add9]  Michael Kuron <m.kuron@gmx.de>

	* automon: restore mixing of the both channels after recording stops

	  This is a regression over Asterisk 11, introduced by
	  2dc8a060064f359a17f5ebcd515d85fe5203c019. Previously, recordings started via
	  the automon DTMF code would automatically be mixed together using sox because
	  app_monitor would be called with the m option. This commit restores this
	  behavior.

	  Change-Id: Ibaf58684285c3f1b6ca3714524e6d638ae3b3759

2016-11-04 15:42 +0000 [367d4903cc]  Matt Jordan <mjordan@digium.com>

	* res_http_websocket: Increase the buffer size for non-LOW_MEMORY systems

	  Not surprisingly, using Respoke (and possibly other systems) it is
	  possible to blow past the 16k limit for a WebSocket packet size. This
	  patch bumps it up to 32k, which, at least for Respoke, is sufficient.
	  For now.

	  Because 32k is laughable on a LOW_MEMORY system (as is 16k, for that
	  matter), this patch adds a LOW_MEMORY directive that sets the buffer to
	  8k for systems who have asked for their reduced memory availability to
	  be considered.

	  Change-Id: Id235902537091b58608196844dc4b045e383cd2e

2016-11-04 15:40 +0000 [7a449b6819]  Matt Jordan <mjordan@digium.com>

	* res_stasis: Set a video source mode on Stasis created bridges

	  When a bridge is created via ARI (through res_stasis), no video source
	  mode is set by default. As a result, any endpoint sending video media
	  won't ever see any video reflected back to it.

	  This patch defaults a bridge to a 'follow the talker' video mode.
	  Further work can be done to add routes that allow for the video mode to
	  be controlled through the /bridges resource.

	  Change-Id: I7e9d530a5d7a97a4524a9ee4e468e1a6b3443866

2016-11-04 15:37 +0000 [bbe943729a]  Matt Jordan <mjordan@digium.com>

	* main/bridge_channel: Fix channel reference leak on video source

	  When a channel is made the video source, the bridge holds a reference to
	  it. Whenever the video source changes, that reference is released.
	  However, a ref leak does occur if the channel leaves the bridge (such as
	  being hung up) while it is the video source, as the bridge never
	  releases the ref in such a case.

	  This patch adds a line to the bridge_channel_internal_join routine such
	  that, when a channel finishes its time in the bridge, it notifies the
	  bridge via ast_bridge_remove_video_src that if it is a video source its
	  reference should be released.

	  ASTERISK-26555 #close

	  Change-Id: I3a2f5238a9d2fc49c591f0e65199d782ab0be76a

2016-11-04 15:36 +0000 [a70d6dba8c]  Matt Jordan <mjordan@digium.com>

	* main/bridge: Add some verbose logging for video source changes

	  It's actually quite useful to see the source of a video stream change.
	  This doesn't happen terribly often, even with talk detection - but when
	  it does, it's nice to know which channel is now providing your video
	  stream.

	  As a verbose 5 level message, it shouldn't be terribly spammy or costly
	  to have, and is 'lower level' then most other verbose messages that the
	  bridge system emits.

	  ASTERISK-26555

	  Change-Id: Ia1c20ecafa9670171fd38bddcf3beccae47fb15c

2016-11-04 15:33 +0000 [fb17b630a5]  Matt Jordan <mjordan@digium.com>

	* bridges/bridge_softmix: Remove SSRC changes on join/leave; update video source

	  WebRTC clients really, really want to know the SSRC of the media they're
	  getting. Changing the SSRC is generally not a good thing.

	  bridge_softmix, starting in Asterisk 12, started changing the SSRC of
	  parties as they joined or left the bridge. With most phones, this isn't
	  a problem: phones just play back the stream they're getting. With WebRTC
	  clients, however, the SSRC is tied to a media stream that may be
	  negotiated. When a new SSRC just shows up, the media can be dropped.

	  As it turns out, the SSRC change shouldn't even be necessary. From the
	  perspective of the client, it's still talking to Asterisk with the same
	  media stream: why indicate that the far party has suddenly changed to a
	  different source of media?

	  This patch opts to just remove the SSRC changes. With this patch, video
	  clients that join/leave a softmix bridge actually get the video stream
	  instead of freaking out.

	  ASTERISK-26555

	  Change-Id: I27fec098b32e7c8718b4b65f3fd5fa73527968bf

2016-10-28 15:11 +0000 [70d5f90e3d]  Kevin Harwell <kharwell@digium.com>

	* stasis_recording/stored: remove calls to deprecated readdir_r function.

	  The readdir_r function has been deprecated and should no longer be used. This
	  patch removes the readdir_r dependency (replaced it with readdir) and also moves
	  the directory search code to a more centralized spot (file.c)

	  Also removed a strict dependency on the dirent structure's d_type field as it
	  is not portable. The code now checks to see if the value is available. If so,
	  it tries to use it, but defaults back to using the stats function if necessary.

	  Lastly, for most implementations of readdir it *should* be thread-safe to make
	  concurrent calls to it as long as different directory streams are specified.
	  glibc falls into this category. However, since it is possible that there exist
	  some implementations that are not safe, locking has been added for those other
	  than glibc.

	  ASTERISK-26412
	  ASTERISK-26509 #close

	  Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba

2016-11-04 10:57 +0000 [bf01ff53f8]  Kevin Harwell <kharwell@digium.com>

	* Revert "chan_sip: Fix lastrtprx always updated"

	  This reverts commit 93332cb1d0eea18021ea6538237297e627d6e2fc.

	  Unfortunately, the aforementioned commit caused a regression (incoming calls
	  would eventually disconnect). Thus it is being removed.

	  ASTERISK-26523 #close
	  ASTERISK-25270

	  Change-Id: Ibf5586adc303073a8eac667a4cbfdb6be184a64d

2016-11-03 13:45 +0000 [1504194215]  Alexander Anikin <may213@yandex.ru>

	* chan_ooh323: Fix infinite loop on read second part of H.225 packet

	  Fix logic on read second part of H.225 packet. There was infinite loop on
	  wrong connections due to read before poll.

	  Change-Id: I42b4bf75c46e4a5c5df5c5ca1f0bd74b8944e7ff

2016-11-03 11:55 +0000 [78dc6ceaf6]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Fix issue with libasteriskpj needing libresample

	  libresample is only needed by pjproject if we're building pjsua, which
	  we only do if TEST_FRAMEWORK is selected.  It's required by pjsua to
	  process audio which is needed by some testsuite tests.  Unfortunately,
	  pjproject relies on a newer version of libresample than the version
	  that ships by most distros so we need to compile the version that's
	  bundled with pjproject.  Since we only need it for pjsua, we DON'T want
	  it's symbols exposed when we actually build asterisk.

	  There was a problem however... TEST_FRAMEWORK is only known AFTER we've
	  already run ./configure on both asterisk and pjproject but pjproject's
	  ./configure needs to test it to know whether to set up to build
	  libresample or not.  The previous way of figuring this out was to
	  always tell ./configure "yes" but not actually build the library.  This
	  caused an issue where building libasteriskpj was being told to include
	  libresample but it wasn't actually there.

	  The solution is to still do a default pjproject configure during an
	  asterisk ./configure but if makeopts or menuselect.makeopts changes
	  subsequently, we now reconfigure pjproject, taking into account the
	  current state of TEST_FRAMEWORK.  Previously, if makeopts or
	  menuselect.makeopts changed, only a recompile of pjproject was done.

	  Change-Id: I9b5d84c61384a3ae07fe30e85c49698378cc4685

2016-11-01 19:48 +0000 [0904c1f4cc]  Sebastian Gutierrez <sgutierrez@integraccs.com>

	* chan_sip: add missing account code

	  Added missing account to AMI event of sip show peers

	  ASTERISK-26176 #close

	  Change-Id: Ieb6c2c80a838a1b59c82103eba4c63ba238dc482

2016-11-02 09:15 +0000 [4de5454ef1]  Joshua Colp <jcolp@digium.com>

	* app_dial: Fix incorrect device state when channel is picked up.

	  Given the scenario where multiple channels are dialed using Dial()
	  but the caller is picked up using PickupChan() all outgoing channels
	  except the channel specified to PickupChan() would be marked
	  as ringing until the call had been hung up.

	  When using the PickupChan application the channel executing the
	  application is swapped into place of another channel. As part
	  of this process the channel is answered. The Dial application
	  has explicit logic which checks if the channel is answered,
	  cancels all other outgoing channels, and bridges. This logic is
	  different than the normal logic that is executed when an outgoing
	  channel is answered. This different logic failed to publish dial
	  events stating that the other outgoing channels had been canceled.
	  As a result references to the outgoing channels were held onto by
	  the dial masquerade process until the call had been ended and
	  the channels had gone away. This would result in the channels
	  appearing in the "core show channels" list despite not being present
	  anymore and would also result in incorrect device state.

	  This change makes it so that this logic also publishes
	  dial events stating that the other outgoing channels have been
	  canceled.

	  ASTERISK-26549

	  Change-Id: Iea7168e6e82f7d4609ec0366153804e4f55ea64f

2016-09-13 04:08 +0000 [9ac53877f6]  Alexander Traud <pabstraud@compuserve.com>

	* rtp_engine: Allow more than 32 dynamic payload types.

	  Since adding all remaining rates of Signed Linear (ASTERISK-24274), SILK
	  (Gerrit 3136) and Codec 2 (ASTERISK-26217), no RTP Payload Type is left in the
	  dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges.
	  Consequently, when the dynamic range is exhausted, this change utilizes payload
	  types in the range between 35 and 63 giving room for another 29 payload types.

	  ASTERISK-26311 #close

	  Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964

2016-11-02 05:05 +0000 [6a99f007d6]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* autoconf: more variants for OSARCH linux-gnu

	  There are quite a few odd GNU/Linux platforms. Just call all of them
	  linux-gnu.

	  Specifically this fixes building the Debian platforms mips64el and x32.
	  And maybe also others.

	  ASTERISK-26546 #close

	  Change-Id: I06ec4bd7f0ee1c84b6b24d81538223b07c4174b1

2016-11-01 13:13 +0000 [f29b8d62bb]  Richard Mudgett <rmudgett@digium.com>

	* bundled pjproject: Fix DNS write to freed memory.

	  PJPROJECT 2.5.5 introduced a race condition with the -r5349 IPv6 DNS
	  patch.

	  The patch below fixes a write to freed memory under cartain DNS lookup
	  conditions.

	  0006-r5477-svn-backport-Fix-DNS-write-on-freed-memory.patch

	  ASTERISK-26516
	  Reported by:  Richard Mudgett

	  Change-Id: Ifdfae9ecf1e41b53080f33aab44ce1a220f349c5

2016-11-01 06:56 +0000 [6233e146c6]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Limit number of formats to defined maximum.

	  The res_pjsip_sdp_rtp module did not restrict the number of
	  formats added to a media stream in the SDP to the defined
	  limit. If allow=all was used with additional loaded codecs this
	  could result in the next media stream being overwritten some.

	  This change restricts the module to limit it to the defined
	  maximum and also increases the maximum in our bundled pjproject.

	  ASTERISK-26541 #close

	  Change-Id: I0dc5f59d3891246cafa2f3df5ec406f088559ee8

2016-10-31 17:35 +0000 [8060cd1ec1]  Kevin Harwell <kharwell@digium.com>

	* codecs.conf.sample: Add sample and option descriptions for codec_opus

	  codecs.conf.sample was missing codec opus's configuration options, descriptions,
	  and examples. This patch adds the configuration options and examples to
	  codecs.conf.sample that can be used with codec_opus.

	  ASTERISK-26538 #close

	  Change-Id: I1d89bb5e01d3e3b5bd78951b8dd0ff077a83dc8b

2016-10-20 07:27 +0000 [c30d677333]  Matt Jordan <mjordan@digium.com>

	* res/stasis: Add CLI commands for displaying/debugging ARI apps

	  This patch adds three new CLI commands:
	   - ari show apps: list the registered ARI applications
	   - ari show app: show detailed information about an ARI application
	   - ari set debug: dump events being sent to an ARI application

	  Note that while these CLI commands live in the res_stasis module, we use
	  the 'ari' family for these commands. This was done as most users of
	  Asterisk aren't aware of the semantic differences between ARI and
	  res_stasis, and some 'ari' CLI commands already exist.

	  ASTERISK-26488 #close

	  Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5

2016-11-01 08:32 +0000 [2526dff94d]  Grachev Sergey <grachev@mcn.ru>

	* chan_sip: Incorrect display option Outbound reg. retry 403

	  If in sip.conf (general section) set option register_retry_403=no,
	  the command "sip show settings" return value:
	  Outbound reg. retry 403:0
	  If in sip.conf (general section) set option register_retry_403=yes,
	  the command "sip show settings" return value:
	  Outbound reg. retry 403:-1

	  * In static char "sip show settings" for "Outbound.reg. retry 403"
	  option use AST_CLI_YESNO

	  ASTERISK-26476 #close

	  Change-Id: I3c14272f05f1067bd2aeaa8b3ef9cf8fcb12dcf9

2016-11-01 04:18 +0000 [ed08811e64]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* netsock.c: fix includes for HURD

	  ASTERISK-25070

	  Change-Id: I43bf94d2d36d3d8a8d0df40cd6c027d65a462814

2016-11-01 04:00 +0000 [69fed26deb]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* define PATH_MAX for HURD

	  PATH_MAX is not guaranteed to be defined. In parctice, all but the HURD
	  define it to a constant. It is indeed not safe to assume there won't be
	  longer paths and Asterisk generally does err safely on such cases.

	  So even for HURD we'll just pretend PATH_MAX is 4096.

	  ASTERISK-25070 #close

	  Change-Id: I53d10ba18c34c132bcb640a5fd8e0da1d9b22db3

2016-10-31 16:12 +0000 [f27f837a9f]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Fix compile of pjsua so it handles audio

	  In order for pjsua and its python binding to actually negotiate
	  audio for the testsuite tests, it needs g711 and resample.  The
	  pj* libraries themselves do not.  Unfortunately, pjproject relies
	  on a brand new libresample that most distros don't ship so we need
	  to use the libresample already bundled with pjproject.  Only the pjsua
	  executable and the _pjsua.so python library are linked with it so it
	  shouldn't interfere with asterisk itself.

	  Also it was pointed out that apply_patches couldn't handle multiple
	  patches that depended on each other during the dry-run, so the
	  dry-run was removed.

	  Change-Id: I24f397462b486dcdde0dcafe40e6c55a6593f098

2016-10-31 13:46 +0000 [1648ca06c3]  Etienne Lessard <elessard@proformatique.com>

	* manager: Add documentation for NewConnectedLine event.

	  The NewConnectedLine event has been added by commit fe7671f, but the
	  documentation was missing.

	  ASTERISK-26537 #close

	  Change-Id: I7fc331f18caa28492da9303e576f70884ca8c9e6

2016-10-30 13:33 +0000 [273debd261]  Corey Farrell <git@cfware.com>

	* vector: Prevent NULL argument to memcpy.

	  Headers declare that memcpy does not accept NULL argument for the first
	  two parameters.  Add a conditional block to prevent memcpy and ast_free
	  from running on vectors with NULL element array.

	  ASTERISK-26526 #close

	  Change-Id: I988a476bb5fcfcbd3f6d6c6b3e7769e4f9629b71

2016-10-29 10:19 +0000 [ad60927a40]  Corey Farrell <git@cfware.com>

	* astobj2: Declare private variable data_size for AO2_DEBUG only.

	  Every ao2 object contains storage for a private variable data_size,
	  though the value is never read if AO2_DEBUG is disabled.  This change
	  makes the variable conditional, reducing memory usage.

	  ASTERISK-26524 #close

	  Change-Id: If859929e507676ebc58b0f84247a4231e11da07f

2016-10-28 14:55 +0000 [6feee22e09]  Richard Mudgett <rmudgett@digium.com>

	* bundled pjproject: Crashes while resolving DNS names.

	  PJPROJECT 2.5.5 introduced a race condition with the -r5349 IPv6 DNS
	  patch.

	  The patches below fix the DNS lookup race condition crash caused by
	  attempting to send the same message twice for the single DNS lookup.

	  0006-r5471-svn-backport-Various-fixes-for-DNS-IPv6.patch
	  0006-r5473-svn-backport-Fix-pending-query.patch

	  The patch below removes a cached DNS response from the hash table when
	  another thread is referencing the old entry.  The table still contained
	  the entry when it was destroyed which can result in inexplicable crashes.

	  0006-r5475-svn-backport-Remove-DNS-cache-entry.patch

	  ASTERISK-26344 #close
	  Reported by: Ian Gilmour

	  ASTERISK-26387 #close
	  Reported by: Harley Peters

	  Change-Id: I17fde80359e66f65a91341ceca58d914d0f61cc4

2016-10-28 16:59 +0000 [12bdde6a6c]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Fix issue where "/version.mak" wasn't found

	  main/Makefile includes third-party/pjproject/build.mak but
	  doesn't set PJDIR beforehand so "include $(PJDIR)/version.mak"
	  evaluates to "/version.mak".  Fix is to set PJDIR in main/Makefile
	  before the include.

	  Change-Id: I0f7c67d60209049056fe9c4b041bf0463aa95604

2016-10-28 13:30 +0000 [9d8b9b6ca5]  Matt Krokosz <mkrokosz@vonage.com>

	* res_pjsip_outbound_publish: Fix crash when publishing device state.

	  While publishing device state between multiple instances of Asterisk,
	  a crash will sporadically occur under high CPS which looks to be a
	  race condition operating on the publisher queue.

	  ASTERISK-26506

	  Change-Id: I28da25d346deb358eff1d563485cabc433ce1ed6

2016-10-27 21:49 +0000 [d6ad867897]  Corey Farrell <git@cfware.com>

	* Fix shutdown crash caused by modules being left open.

	  It is only safe to run ast_register_cleanup callbacks when all modules
	  have been unloaded.  Previously these callbacks were run during graceful
	  shutdown, making it possible to crash during shutdown.

	  ASTERISK-26513 #close

	  Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21

2016-10-28 09:50 +0000 [badd38f031]  Rusty Newton <rnewton@digium.com>

	* SAC documentation: don't specify transports for endpoints and registrations

	  Removing explicit transport definition for endpoints and registrations. It
	  isn't necessary and isn't generally advised.

	  ASTERISK-26514 #close

	  Change-Id: Ifdec5e631962438a4683600968dfa4bfd15909fb

2016-10-18 09:06 +0000 [0646b48ece]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* chan_dahdi: remove by_name support

	  Support for referring to DAHDI channels by logical names was added in
	  (FIXME: when? Asterisk 11? 1.8?) and was intended to be part of support
	  of refering to channels by name.

	  While technically usable, it has never been properly supported in
	  dahdi-tools, as using it would require many changes at the Asterisk
	  level. Instead logical mapping was added at the kernel level.

	  Thus it seems that refering to DAHDI channels by name is not really used
	  by anyone, and therefore should probably be removed.

	  Change-Id: I7d50bbfd9d957586f5cd06570244ef87bd54b485

2016-10-26 18:48 +0000 [4f45d62653]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Remove usage of tar's --strip-components option

	  Older versions of tar don't support the --strip-components option so
	  instead of doing 'tar --strip-components=1 -C source', we now just
	  untar to the tarball's root directory (pjproject-<version>) and
	  rename that directory to 'source'.

	  Also fixed an issue where the pjproject source directory is a hard
	  coded absolute pathname.

	  ASTERISK-26510 #close
	  ASTERISK-22480 #close

	  Change-Id: I9ec92952507a91ff4e4d01e0149e09fd8e8f32b0

2016-10-26 21:40 +0000 [a6e5bae3ef]  Corey Farrell <git@cfware.com>

	* Remove ASTERISK_REGISTER_FILE.

	  ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
	  all traces of it.

	  Previously exported symbols removed:
	  * __ast_register_file
	  * __ast_unregister_file
	  * ast_complete_source_filename

	  This also removes the mtx_prof static variable that was declared when
	  MTX_PROFILE was enabled.  This variable was only used in lock.c so it
	  is now initialized in that file only.

	  ASTERISK-26480 #close

	  Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966

2016-10-27 08:07 +0000 [6993f3c9c3]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_caller_id: Fix crash on session timers UPDATE on inbound calls.

	  The res_pjsip_caller_id module wrongly assumed that a
	  saved From header would always exist on sessions. This
	  is true until an inbound call is received and a session
	  timer causes an UPDATE to be sent. In this case there will
	  be no saved From header and a crash will occur. This change
	  makes it fall back to the From header of the outgoing request
	  if no saved From header is present.

	  ASTERISK-26307 #close

	  Change-Id: Iccc3bc8d243b5ede9b81abf960292930c908d4fa

2016-10-26 07:51 +0000 [95062fe220]  Joshua Colp <jcolp@digium.com>

	* app_voicemail: Clear voice mailbox in MailboxExists and MAILBOX_EXISTS.

	  When executing the MailboxExists dialplan application and
	  MAILBOX_EXISTS dialplan function the passed in temporary voice
	  mailbox was not cleared, causing it to try to free garbage.

	  ASTERISK-26503 #close

	  Change-Id: Ie21ccfa1b80b9c59318e596f6b8e17da2b5a7cb3

2016-10-23 07:38 +0000 [aed6c219a3]  Joshua Colp <jcolp@digium.com>

	* pjsip: Fix a few media bugs with reinvites and asymmetric payloads.

	  When channel format changes occurred as a result of an RTP
	  re-negotiation the bridge was not informed this had happened.
	  As a result the bridge technology was not re-evaluated and the
	  channel may have been in a bridge technology that was incompatible
	  with its formats. The bridge is now unbridged and the technology
	  re-evaluated when this occurs.

	  The chan_pjsip module also allowed asymmetric codecs for sending
	  and receiving. This did not work with all devices and caused one
	  way audio problems. The default has been changed to NOT do this
	  but to match the sending codec to the receiving codec. For users
	  who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
	  which will return chan_pjsip to the previous behavior.

	  The codecs returned by the chan_pjsip module when queried by
	  the bridge_native_rtp module were also not reflective of the
	  actual negotiated codecs. The nativeformats are now returned as
	  they reflect the actual negotiated codecs.

	  ASTERISK-26423 #close

	  Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc

2016-10-26 06:32 +0000 [7925f60cd9]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Fix address family of explicit media_address.

	  When an explicit media_address is provided the address family
	  in the SDP needs to be set to reflect it.

	  ASTERISK-26309

	  Change-Id: Ib9350cc91c120eb2f96f0623d3907d12af67eb79

2016-10-25 11:20 +0000 [802bbf8752]  George Joseph <gjoseph@digium.com>

	* test_astobj2_thrash:  Fix multithreaded issues

	  The test uses 4 threads to grow, count, lookup and shrink 15K objects
	  in a container.  If there's only 1 execution engine available, the test
	  will complete in <50ms.  If each threads gets its own execution engine,
	  the test may timeout after 60 seconds because the count thread does a
	  locked ao2_callback on the whole container in a tight loop with only
	  a sched_yield to give up time.  The lock contention makes the test
	  execution times wildly variable and mostly timeout.  2 execution
	  engines are OK, 3 results in about 33% failure rate and >=4 causes
	  a 80% failure rate.

	  To fix, the sched_yield was changed to a usleep(500).

	  Also, the number of buckets specified for the container was an even
	  number so that was changed to the next prime number greater than
	  (MAX_HASH_ENTRIES / 100).  That's 151 currently.

	  Change-Id: I50cd2344161ea61bfe4b96d2a29a6ccf88385c77

2016-10-18 09:04 +0000 [2b9ad3a5f7]  Alexei Gradinari <alex2grad@gmail.com>

	* chan_pjsip: segfault on already disconnected session

	  On heavy loaded system the TCP/TLS incoming calls could be
	  disconnected by pjproject while these calls are being
	  processed by asterisk.

	  This patch uses functions pjsip_inv_add_ref/pjsip_inv_dec_ref
	  to inform pjproject that an INVITE session is in use.

	  ASTERISK-26482 #close

	  Change-Id: Ia2e3e2f75358cdb530252a9ce158af3d5d9fdf33

2016-10-10 11:49 +0000 [01d1d3763f]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* cdr_radius,cel_radius: Fix old memleak in unload

	  - Call "rc_openlog" optional. If you do not call,
	  you will simply NULL instead of a name.

	  - On the one PID can be only one syslog channel.
	  And it can already be run in logger.c

	  - Calling rc_openlog we assigns a new name for
	  the channel syslog. This unexpected behavior for logger.c.

	  Most lesser evil, is to agree on a NULL name syslog
	  if the channel was not launched in logger.c.

	  It also solves the problem of memory leaks.

	  ASTERISK-26455 #close

	  Change-Id: Ic17c38de67583e971d78fe18807d1a9faf8f0afd

2016-10-24 10:55 +0000 [16c23b57c7]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Fixed various build issues

	  * CFLAGS is now properly set when using older gcc.
	  * All third-party pjproject targets have been removed.  This fixes
	    an issue with older libsrtp in some distros.
	  * Manually removing the source directory now causes a rebuild.
	  * EXTERNALS_CACHE_DIR is now properly checked.
	  * Whitespace fixes.

	  Change-Id: I98fec6847efc5602a9f41cb95096fd660a49fa60

2016-10-24 14:13 +0000 [1d277e7cb6]  Pascal Cadotte Michaud <pcadotte@proformatique.com>

	* typo: s/paranthesis/parenthesis/ in a comment

	  Change-Id: I7c1f4eb051177ee22cbe97e063d4a3effe29be30

2016-09-19 06:13 +0000 [403c4f5833]  Joshua Colp <jcolp@digium.com>

	* pjsip: Support dual stack automatically.

	  This change adds support for dual stack automatically. No
	  configuration is required and the IP address and version
	  in the SIP messages and SDP will be automatically changed
	  based on the transport over which the message is being
	  sent. RTP usage has also been changed to listen on both
	  IPv4 and IPv6 simultaneously to allow media to flow, and
	  to allow ICE support on both simultaneously. This also
	  allows failover between IPv6 and IPv4 to work as expected.

	  ASTERISK-26309 #close

	  Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d

2016-10-19 12:05 +0000 [3bd76dd679]  Mark Michelson <mmichelson@digium.com>

	* ARI: Add duplicate channel ID checking for channel creation.

	  This is similar to what is done for origination, but for the 14 and up
	  channel creation method. When attempting to create a channel, if a
	  channel ID is specified and a channel already exists with that ID, then
	  a 409 is returned.

	  Change-Id: I77f9253278c6947939c418073b6b31065489187c

2016-10-17 14:18 +0000 [e459b8dadf]  Mark Michelson <mmichelson@digium.com>

	* ARI: Detect duplicate channel IDs

	  ARI and AMI allow for an explicit channel ID to be specified
	  when originating channels. Unfortunately, there is nothing in
	  place to prevent someone from using the same ID for multiple
	  channels. Further complicating things, adding ID validation to channel
	  allocation makes it impossible for ARI to discern why channel allocation
	  failed, resulting in a vague error code being returned.

	  The fix for this is to institute a new method for channel errors to be
	  discerned. The method mirrors errno, in that when an error occurs, the
	  caller can consult the channel errno value to determine what the error
	  was. This initial iteration of the feature only introduces "unknown" and
	  "channel ID exists" errors. However, it's possible to add more errors as
	  needed.

	  ARI uses this feature to determine why channel allocation failed and can
	  return a 409 error during origination to show that a channel with the
	  given ID already exists.

	  ASTERISK-26421

	  Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06

2016-10-19 17:53 +0000 [e03364c40a]  snuffy <snuffy22@gmail.com>

	* Fix issue with CLI not returning to prompt after running "features show"

	  ASTERISK-26444 #close

	  Change-Id: I91d645b7e6e5dba35f8c410df2be77a8c0e3acb8

2016-10-04 18:24 +0000 [3e96d491d0]  Michael Walton <mike@farsouthnet.com>

	* res_rtp_asterisk: Add ice_blacklist option

	  Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the
	  form ice_blacklist = <subnet spec>, e.g. ice_blacklist =
	  192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay
	  discovery. This is useful for optimizing the ICE process where a system
	  has multiple host address ranges and/or physical interfaces and certain
	  of them are not expected to be used for RTP. Multiple ice_blacklist
	  configuration lines may be used. If left unconfigured, all discovered
	  host addresses are used, as per previous behavior.

	  Documention in rtp.conf.sample.

	  ASTERISK-26418 #close

	  Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9

2016-10-18 16:30 +0000 [f14ef51ead]  Mark Michelson <mmichelson@digium.com>

	* CDR: Alter destruction pattern for CDR chains.

	  CDRs form chains. When the root of the chain is destroyed, it then
	  unreferences the next CDR in the chain. That CDR is destroyed, and it
	  then unreferences the next CDR in the chain. This repeats until the end
	  of the chain is reached. While this typically does not cause any sort of
	  problems, it is possible in strange scenarios for the CDR chain to grow
	  way longer than expected. In such a scenario, the destruction pattern
	  can result in a stack overflow.

	  This patch fixes the problem by switching from a recursive pattern to an
	  iterative pattern for destruction. When the root CDR is destroyed, it is
	  responsible for iterating over the rest of the CDRs and unreferencing
	  each one. Other CDRs in the chain, since they are not the root, will
	  simply destroy themselves and be done. This causes the stack depth not
	  to increase.

	  ASTERISK-26421 #close
	  Reported by Andrew Nagy

	  Change-Id: I3ca90c2b8051f3b7ead2e0e43f60d2c18fb204b8

2016-10-18 11:51 +0000 [f31772ec20]  Joshua Colp <jcolp@digium.com>

	* ari: Update model validator based on addition of asterisk_id.

	  ASTERISK-26470

	  Change-Id: I9c386f7a1c7d969161b28f189eb6298bbc5b7541

2016-09-11 10:13 +0000 [18a6f250e2]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* menuselect: invalid test for GTK2

	  configuire.ac was only checking for the existence of pkg-config
	  and not the gtk2 package itself.  Now it calls AST_PKG_CONFIG_CHECK
	  for gtk+-2.0.

	  ASTERISK-26356 #close

	  Change-Id: I93e9d0166341f0e7f84b52955bb6f81da42f2ef6

2016-10-18 03:01 +0000 [a43ee21211]  Alexander Traud <pabstraud@compuserve.com>

	* cli: Auto-complete File not Module for core set debug.

	  Since Asterisk 1.8, the command "core set debug" on the command-line interface
	  asks not for a file (.c) but a module name. This change shows modules (.so) on
	  the auto-completion via a tabulator or the question mark. Now, when you
	  partially type a module name, TAB or ?, you get the correct candidiates.

	  ASTERISK-26480

	  Change-Id: I1213f1dd409bd4ff8de08ad80cb0c73cafb1bae0

2016-08-12 11:22 +0000 [dce31f90ba]  frahaase <fra.haase@googlemail.com>

	* Binaural synthesis (confbridge): On/off setting for binaural synthesis.

	  Adds setting to confbridge.conf (binaural_active) that determines if binaural
	  synthesis can be available in bridge_softmix.

	  ASTERISK-26292

	  Change-Id: I59dfcb8e55fe1df4ef32045882fea5bb58fc71db

2016-10-17 11:39 +0000 [2a808b2fa6]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Add patch to address SSL crash

	  Addresses crashes when an attempt is made to operate on an SSL socket
	  after the socket has been closed.

	  ASTERISK-26477 #close

	  Change-Id: I421305b357558b4f9e690210dc0f4831ef4b3002

2016-10-13 14:09 +0000 [973e57d5ce]  Leandro Dardini <ldardini@gmail.com>

	* app_queue: Added initialization for "context" parameter

	  When using Asterisk Realtime Architecture, empty fields are skipped and the
	  default values are used. If the "context" parameter in queue was set and then
	  cleared from the database, the old value remains in memory and it continues
	  to be used. This change initialize the "context" parameter with an empty value,
	  allowing clearing the parameter.

	  ASTERISK-26462 #close

	  Change-Id: I64be73d5044ce38dd02408bd0e53de965ef65905

2016-10-15 20:05 +0000 [dd5129d84a]  Matt Jordan <mjordan@digium.com>

	* res/ari: Add the Asterisk EID field to outgoing events

	  This patch adds the Asterisk EID field to all outgoing ARI events.
	  Because this field should be added to all events as they are
	  transmitted, it is appended to the JSON message just prior to it being
	  handed off to the application message handler. This makes it somewhat
	  resilient to both new events being added to ARI, as well as other
	  potential event transport mechanisms.

	  ASTERISK-26470 #close

	  Change-Id: Ieff0ecc24464e83f3f44e9c3e7bd9a5d70b87a1d

2016-10-13 02:06 +0000 [2b03017022]  Moises Silva <moises.silva@gmail.com>

	* chan_rtp: Set a sane default rtp engine for unicast.

	  ASTERISK-26439

	  Change-Id: I7f5ee2eeba8906e9ecb3293dbe3a747770bb5011

2016-10-16 17:25 +0000 [6651c66e68]  George Joseph <gjoseph@digium.com>

	* utils.c:  Fix ast_set_default_eid for multiple platforms

	  ast_set_default_eid was searching for ethX, emX, enoX, ensX and even
	  pciD#U interface names.  While this was a good attempt, it wasn't
	  inclusive enough to capture interfaces like enp6s0 or ens6d1, etc.

	  Rather than relying on interface names, we now simply find the first
	  interface returned by the OS that has a hardware address and that
	  address isn't all 0x00 or all 0xff.  The code IS different for BSD,
	  Solaris and Linux based on what method is available for enumerating
	  interfaces.

	  Tested on:
	  FreeBSD9
	  CentOS6
	  Ubuntu14
	  Fedora24

	  I was unable to test on Solaris at this time but the code for Solaris
	  is used elsewhere at Digium.

	  Change-Id: Iaa6db87ca78a9a375e47d70e043ae08c1448cb72

2016-10-15 04:58 +0000 [e9315791b3]  Michael Kuron <m.kuron@gmx.de>

	* chan_sip: Only send video on outgoing channel if incoming channel supports it

	  Previously, the settings videosupport=always and videosupport=yes behaved
	  identically and unconditionally caused a video offer to be sent in the SDP on
	  an outgoing call. This was a regression introduced with commit
	  5a1d90e1fbfc4b48927aad55311f3b38efbf1f54 in Asterisk 1.6.1.

	  This commit restores correct behavior: videosupport=always causes a video offer
	  to be sent unconditionally, while videosupport=yes will only offer video on an
	  outbound channel if the incoming channel it is bridged to also supports video.
	  That way, the device receiving the outgoing call can display the correct user
	  interface elements for audio or video and will not unnecessarily show a blank
	  video window on an audio-only call.

	  ASTERISK-17470 #close

	  Change-Id: I782f4409d436114dbc97061c3570c0cd24f7c3ae

2016-10-14 00:18 +0000 [aa39a87697]  Corey Farrell <git@cfware.com>

	* Fix issues with bundled pjproject cached download.

	  Previously when testing I had a preexisting makeopts in ASTTOPDIR.  The
	  ordering of configure.ac causes --with-externals-cache to be processed
	  after third-party configure.  In cases where the Asterisk clone is
	  cleaned it would cause pjproject to be downloaded to /tmp.  This
	  moves processing of the externals cache and sounds cache to happen
	  before third-party configure.

	  This also addresses a possible issue with the third-party Makefile.  If
	  TMPDIR is set by the environment it would override the path given to
	  --with-externals-cache.

	  ASTERISK-26416

	  Change-Id: Ifab7f35bfcd5a31a31a3a4353cc26a68c8c6592d

2016-10-12 16:24 +0000 [9c49b96374]  Richard Mudgett <rmudgett@digium.com>

	* Audit ast_json_pack() calls for needed UTF-8 checks.

	  Added needed UTF-8 checks before constructing json objects in various
	  files for strings obtained outside the system.  In this case string values
	  from a channel driver's peer and not from the user setting channel
	  variables.

	  * aoc.c: Fixed type mismatch in s_to_json() for time and granularity json
	  object construction.

	  ASTERISK-26466
	  Reported by: Richard Mudgett

	  Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096

2016-10-12 16:20 +0000 [774d5f7ef7]  Richard Mudgett <rmudgett@digium.com>

	* json: Check party id name, number, subaddresses for UTF-8.

	  * Updated unit test as ast_json_name_number() is now NULL tolerant.

	  ASTERISK-26466 #close
	  Reported by: Richard Mudgett

	  Change-Id: I7d4e14194f8f81f24a1dc34d1b8602c0950265a6

2016-10-11 18:14 +0000 [1c4c6c082d]  Richard Mudgett <rmudgett@digium.com>

	* json: Add UTF-8 check call.

	  Since the json library does not make the check function public we
	  recreate/copy the function in our interface module.

	  ASTERISK-26466
	  Reported by: Richard Mudgett

	  Change-Id: I36d3d750b6f5f1a110bc69ea92b435ecdeeb2a99

2016-10-12 17:42 +0000 [6fe5202c2c]  Richard Mudgett <rmudgett@digium.com>

	* aoc.c: Whitespace cleanup

	  * In s_to_json() removed unnecessary ast_json_ref() to ast_json_null()
	  when creating the type json object.  The ref is a noop.

	  Change-Id: I2be8b836876fc2e34a27c161f8b1c53b58a3889a

2016-10-12 16:22 +0000 [c3bf1632cd]  Richard Mudgett <rmudgett@digium.com>

	* app_minivm.c: Fix malformed ast_json_pack() call.

	  Change-Id: I082b239022fac462666e52a14a44304748908dc0

2016-10-12 17:27 +0000 [9c54964dc5]  Richard Mudgett <rmudgett@digium.com>

	* app_queue.c: Fix clearing of pause reason string.

	  The pause reason is not always cleared when it should be cleared.

	  * Made set_queue_member_pause() always clear pause reason if not pausing
	  with a reason string.

	  Change-Id: I993dad19626ec017478a230e980989438b778c53

2016-10-12 16:30 +0000 [3b3d06884c]  George Joseph <gjoseph@digium.com>

	* res_config_mysql:  Fix several issues related to recent table changes

	  Unlike any of the other database drivers, res_config_mysql checks that
	  the table definition matches the requirements for every insert and
	  update statement.  Since all requirements are forced to 'char', any
	  column that isn't a char, like ps_contacts' expiration_time,
	  qualify_timeout, etc., will throw a warning.  It's kinda harmless but
	  very misleading.  Since no other driver does those checks on insert
	  or update, they've been removed from res_config_mysql.  Also, all
	  the logic that actually attempted to ALTER the table to fix the issue
	  has been removed.  With the move to alembic, the auto-alter
	  functionality is not only unnecessary, it's also dangerous.

	  The other issue is that res_config_mysql calls the mysql_insert_id
	  function inside store_mysql.  Presumably the intention was to return
	  the number of rows inserted DESPITE A NOTE IN THE CODE THAT THE VALUE
	  IS NON_PORTABLE AND MAY CHANGE.  That value is then returned to
	  config realtime as the number of rows inserted.  Guess what?  The value
	  changed.  It now only returns the number of rows inserted if there's an
	  auto increment column on the table, which ps_contacts doesn't have.
	  Otherwise it returns 0.  So now, the insert worked but we tell config
	  realtime and sorcery that no rows were inserted.  That call to
	  mysql_insert_id was removed and we now always return 1 if the insert
	  succeeded.  We're only inserting 1 row at a time anyway.  If the insert
	  fails, we still return -1.

	  ASTERISK-26362 #close
	  Reported-by: Carlos Chavez

	  Change-Id: I83ce633efdb477b03c8399946994ee16fefceaf4

2016-08-12 11:22 +0000 [dd6fc1bb7d]  frahaase <fra.haase@googlemail.com>

	* Binaural synthesis (confbridge): Adds libfftw3 as dependency.

	  Adds libfftw3 to the build chain that is is going to be used for binaural
	  synthesis by bridge_softmix.

	  ASTERISK-26292

	  Change-Id: Iedc2f174e4ccb39ae5d9e698e339c6a17155867b

2016-09-29 13:08 +0000 [20c3dba39e]  Torrey Searle <torrey@voxbone.com>

	* res_fax: Fix a tight race condition causing fax to crash in audio fallback

	  When T.38 gets rejected and G711 failback occurs there is a period of
	  time where neither AST_FAX_TECH_T38 nor AST_FAX_TECH_AUDIO is set,
	  leading to a crash.

	  Change-Id: Icc3f457b2292d48a9d7843dac0028347420cc982

2016-10-06 09:58 +0000 [86e8716952]  George Joseph <gjoseph@digium.com>

	* app_dial:  Add the "Q" option to set the cause on unanswered channels

	  The "Q" option will set the cause on the unanswered channels when
	  another channel answers.  It overrides the default of
	  ANSWERED_ELSEWHERE.

	  NOTE:  chan_sip does not support setting the cause on a CANCEL to
	  anything other than ANSWERED_ELSEWHERE.

	  ASTERISK-26446 #close

	  Change-Id: I71742e0919aaa16784c30a2b2e73fbeed7672e47

2016-10-11 06:55 +0000 [4f7f8a7e95]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Support nat=auto_comedia or nat=force_rport,auto_comedia.

	  In the SIP channel driver chan_sip, auto_comedia was expected to be used in
	  tandem with auto_force_rport. Or stated differently: Only when auto_force_rport
	  was chosen (the default), auto_comedia worked. This change allows auto_comedia
	  to be set independently of the state of (auto_)force_rport. For example,
	  nat=force_rport,auto_comedia is useful for IPv4/IPv6 Dual Stack deployments
	  when IPv6 clients are behind a Firewall.

	  ASTERISK-26457 #close

	  Change-Id: Ib29d66c6dbb61648e371e01fc36c6978ddae5bc2

2016-10-10 16:59 +0000 [17031f12fe]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* vector: After remove element recheck index

	  Small fix. It is necessary to double-check
	  the index that we just removed because there
	  is a new element.

	  ASTERISK-26453 #close

	  Change-Id: Ib947fa94dc91dcd9341f357f1084782c64434eb7

2016-09-29 12:52 +0000 [cc269766b8]  Torrey Searle <torrey@voxbone.com>

	* res_rtp_asterisk: Fix infinite DTMF issue when switching to P2P bridge

	  If a bridge switched to P2P when a DTMF was in progress it
	  was possible for the DTMF to continue being sent indefinitely.

	  Change-Id: I7e2a3efe0d59d4b214ed50cd0b5d0317e2d92e29

2016-10-09 21:28 +0000 [fafdde322c]  Corey Farrell <git@cfware.com>

	* logger: Prevent output of verbose messages initiated from rasterisk.

	  Remote asterisk consoles should only display verbose log messages
	  created by the daemon.  The first patch for ASTERISK-26410 caused
	  a couple verbose messages to be printed when the rasterisk process
	  ended.

	  ASTERISK-26410

	  Change-Id: Ie2a1bb3753ad2724c0349ec1a336f52f7117b52a

2016-10-04 20:46 +0000 [7af7490e42]  Michael Walton <mike@farsouthnet.com>

	* audiohooks: Remove redundant codec translations when using audiohooks

	  The main frame read and write handlers in main/channel.c don't use the
	  optimum placement in the processing flow for calling audiohooks
	  callbacks, as far as codec translation is concerned. This change places
	  the audiohooks callback code:
	   * After the channel read translation if the frame is not linear before
	  the translation, thereby increasing the chance that the frame is linear
	  as required by audiohooks
	   * Before the channel write translation if the frame is linear at this
	  point
	  This prevents the audiohooks code from instantiating additional
	  translation paths to/from linear where a linear frame format is already
	  available, saving valuable CPU cycles

	  ASTERISK-26419

	  Change-Id: I6edd5771f0740e758e7eb42558b953f046c01f8f

2016-10-10 10:59 +0000 [3ab7fae96b]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* res_pjsip_config_wizard: Memory leak in module_unload

	  Fixed a memory leak. It removes only the first element.
	  Added a useful feature in vector.h to remove all items
	  under the CMP through a callback function / macro.

	  ASTERISK-26453 #close

	  Change-Id: I84508353463456d2495678f125738e20052da950

2016-09-29 12:45 +0000 [9f62feca60]  Ludovic Gasc (GMLudo) <gmludo@gmail.com>

	* res_calendar: Add support for fetching calendars when reloading

	  We use a lot res_calendar, we are very happy with that, especially
	  because you use libical, the almost alone opensource library that
	  supports really ical format with all types of recurrency.

	  Nevertheless, some features are missed for our business use cases.

	  This first patch adds a new option in calendar.conf:
	  fetch_again_at_reload. Be my guest for a better name.

	  If it's true, when you'll launch "module reload res_calendar.so",
	  Asterisk will download again the calendar.

	  The business use case is that we have a WebUI with a scheduler planner,
	  we know when the calendars are modified.

	  For now, we need to define 1 minute of timeout to have a chance that
	  our user doesn't wait too long between the modification and the real
	  test.  But it generates a lot of useless HTTP traffic.


	  ASTERISK-26422 #close

	  Change-Id: I384b02ebfa42b142bbbd5b7221458c7f4dee7077

2016-10-09 21:53 +0000 [ca2f3e5b99]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* cel_odbc: Fix memory leak on module unload

	  Change-Id: Ic7a1236eba2408090fdabb5f717b5fa455ead715

2016-10-03 11:30 +0000 [5fb848eebd]  George Joseph <gjoseph@digium.com>

	* bundled_pjproject:  Add tests for programs used by the Makefile, et al.

	  Added tests for bzip2, tar, patch, sed and nm to configure.ac.

	  Set DOWNLOAD_TO_STDOUT to a working command line regardless of
	  whether the download program is wget, curl or fetch.

	  Added a 'configure.m4' file to the third-party directory which takes
	  care of calling any third-party project setup.  Had to move some
	  pjproject_bundled stuff up in configure.ac so it was called before
	  the third-party configure macro.

	  The pjproject tarball is now downloaded to the externals_cache_dir if
	  it was specified on the ./configure command line

	  Removed regeneration of the pjproject aconfigure file.  It was only
	  needed for an old patch that no longer applies.

	  Converted the tests for symbols to explicit tests since we know that
	  they're now available in the bundled version.  Saves a little time
	  during configure.

	  ASTERISK-26416 #close
	  Reported-by: Corey Farrell

	  Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b
	  (cherry picked from commit e6b0053d7561032b7adbf6f3afaecf30f5046605)
	  (cherry picked from commit a0d02f38322c2c4d7743504003fd376d32a133db)

2016-10-09 18:54 +0000 [73f75c246b]  Joshua Colp <jcolp@digium.com>

	* Revert "Packet-Loss Concealment (PLC) for supporting codecs."

	  This change introduced some fax test failures
	  that have not yet been addressed. So this is
	  not forgotten I'm submitting a change which
	  reverts it.

	  This reverts:
	  d56fc3b36b7bb59b5506129b9895b6c3341350c9.

	  ASTERISK-25629

	  Change-Id: Ibc2f23c38643f5a2c89cf8915ae2d805b81bc3d5

2016-10-05 14:53 +0000 [c5e8f50169]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Add MALLOC_DEBUG capability

	  pjproject_bundled will now use the asterisk memory debugging APIs
	  if MALLOC_DEBUG is turned on in menuselect.

	  Because this required stubs for the executable programs and the python
	  bindings, some Makefile reorganization was needed to properly handle
	  the dependencies.  As a result, the makefile now individually makes
	  each of the pjproject libraries separately instead of making them all
	  in 1 shot.  The only visible change is that there are separate status
	  lines printed for each library instead oif 1 for all libs.  Also, the
	  making of the pjproject dependency files was eliminated.  They're not
	  needed for building unless you're actively modifying pjproject source
	  files and it makes the build process faster.  Finally, any issues with
	  parallel builds should be resolved again making the build faster.

	  Change-Id: Icc5e3d658fbfb00e0a46b44c66dcc2522d5171b0

2016-10-04 16:59 +0000 [442b597929]  George Joseph <gjoseph@digium.com>

	* alembic:  Allow cdr, config and voicemail to exist in the same schema

	  cdr, config and voicemail are all separate alembic trees.  Because
	  alembic's default is to use a table named 'alembic_version' to store
	  the current tree revision, the 3 trees can't exist in the same schema
	  without stepping on each other.

	  Now each tree uses 'alembic_version_<tree_name>' as the version table.
	  Each tree's env.py script now first checks for 'alembic_version'.  If
	  it finds it AND its revision is in the tree's history, the script
	  renames it to 'alembic_version_<tree_name>'.  Regardless, the script
	  then continues with the migration using 'alembic_version_<tree_name>'
	  and creates that table if it's not found.  The result is that if an
	  existing 'alembic_version' table was found but it didn't belong to this
	  tree, it's left alone and 'alembic_version_<tree_name>' is used or
	  created.

	  WARNING:  If multiple trees are using the same schema, they MUST NOT
	  CRU or D any objects with names that might exist in the other trees.
	  An example would be 'yesno_values' type.  If two trees perform
	  operations on it, one tree could pull it out from under the other.
	  Thankfully we currently don't share any names among cdr, config and
	  voicemail.

	  NOTE:  Since the env.py scripts in each tree were identical, a common
	  env.py has been placed in the ast-db-manage directory and a symlink
	  to it has been placed in each tree directory.

	  ASTERISK-24311 #close
	  Reported-by: Dafi Ni

	  Change-Id: I4d593f000350deb5d21a14fa1e9bc3896844d898

2016-10-05 04:25 +0000 [c4268ec734]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Honor support of Symmetric Response (rport) for SIP requests.

	  In the SIP channel driver chan_sip, the default is "auto_force_rport". When no
	  NAT was detected, for example in case of IPv6, Asterisk uses the IP address
	  from the headers within the SIP-REGISTER for subsequent SIP signaling. When
	  the remote party specifies support for Symmetric Response (RFC 3581) via the
	  parameter "rport", Asterisk should not extract the port from the SIP headers
	  but reuse the port of the transport. This did not happen because of a typo.

	  ASTERISK-26438 #close

	  Change-Id: If6e7891848aaf96666dee5305695f7c6667cd5a6

2016-08-12 11:22 +0000 [c455823657]  frahaase <fra.haase@googlemail.com>

	* Binaural synthesis (confbridge): interleaved two-channel audio.

	  Asterisk only supports mono audio at the moment.
	  This patch adds interleaved two-channel audio to Asterisk's channels.

	  ASTERISK-26292

	  Change-Id: I7a547cea0fd3c6d1e502709d9e7e39605035757a

2016-09-16 18:54 +0000 [2a03575c30]  Corey Farrell <git@cfware.com>

	* astobj2: Add backtrace to log_bad_ao2.

	  * Compile __ast_assert_failed unconditionally.
	  * Use __ast_assert_failed to log messages from log_bad_ao2
	  * Remove calls to ast_assert(0) that happen after log_bad_ao2 was run.

	  Change-Id: I48f1af44b2718ad74a421ff75cb6397b924a9751

2016-09-30 16:29 +0000 [79532bca75]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* Add text of cdr directory into README.md for ast-db-manage

	  Change-Id: I68321c4bea50730c39fdb486e5f23aeadd1ad636

2016-09-09 12:38 +0000 [806d08b675]  Etienne Lessard <elessard@proformatique.com>

	* app_queue: Update dynamic members ringinuse on reload.

	  Previously, when reloading the members of a queue, the members added statically
	  (i.e. defined in queues.conf) would see their "ringinuse" value updated but not
	  the members added dynamically.

	  This change makes dynamic members ringuse value to be updated on reload.

	  Note that it's impossible to add a dynamic member with a specific ringinuse
	  value. For both static and dynamic members, the ringinuse value can always be
	  changed later on with command like "queue set ringinuse" or with the AMI action
	  "QueueMemberRingInUse". So it's possible this commit could break a user workflow
	  if he was changing the ringinuse value of dynamic members via such commands and
	  was also relying on the fact that a queue reload would not update the dynamic
	  members ringinuse value.

	  ASTERISK-26330

	  Change-Id: I3745cc9a06ba7e02c399636f1ee9e58c04081f3f

2016-09-29 14:02 +0000 [d31ffb421c]  Kevin Harwell <kharwell@digium.com>

	* Remove "format_ogg_opus: New format"

	  This reverts commit 40aa28131bc30b4516da2b20eb1a1e043920169c.

	  ASTERISK-26426 #close

	  Change-Id: I81e55c3c512f1dd6f49896f0c6b97a07d74fd8f5

2016-09-19 04:46 +0000 [8c5c95ad89]  Corey Farrell <git@cfware.com>

	* core: Remove ABI effects of LOW_MEMORY.

	  This allows asterisk to compiled with LOW_MEMORY to load modules built
	  without LOW_MEMORY.

	  ASTERISK-26398 #close

	  Change-Id: I24b78ac9493ab933b11087a8b6794f3c96d4872d

2016-09-27 16:10 +0000 [a77ebb2017]  George Joseph <gjoseph@digium.com>

	* download_externals: Fix issue with re-install

	  Needed to ignore an xmlstarlet return code for optional element.

	  Change-Id: I6a96f709b4b38c9a3f3dda4e8b07903787e16873
	  Reported-by: Dan Jenkins

2016-09-27 15:35 +0000 [2d2a8944be]  Corey Farrell <git@cfware.com>

	* logger: Output early verbose messages to console.

	  Verbose messages should be printed to the console if the sublevel is
	  less than option_verbose.  This fix ensures the welcome message with
	  copyright and license are printed at daemon and interactive rasterisk
	  startup.

	  ASTERISK-26410 #close

	  Change-Id: Ia44235e30ec328aba92ea2c8a837b094e65c9a03

2016-09-22 09:49 +0000 [c7ef1e0af3]  George Joseph <gjoseph@digium.com>

	* codec_opus: Add download ability to menuselect

	  Updated codecs/codecs.xml to add codec_opus to the external
	  download list.

	  ASTERISK-26409

	  Change-Id: Ia07b36539f30e852125fb2b94147dc9774df31a4
	  (cherry picked from commit 2cdab0e36eec4997ca3bd85aa09efc477038e31c)
	  (cherry picked from commit e9684f3acd0e8def0df582c1505dd39dd3fd1610)

2016-07-23 14:50 +0000 [5cc3c6679f]  George Joseph <gjoseph@digium.com>

	* codec_opus: Replace res_format_attr_opus with the one from codec_opus

	  Preparation

	  ASTERISK-26409

	  Change-Id: I9f20e7cce00c32464d9a180e81283d49d199d0a3
	  (cherry picked from commit 59f7662a93bf9c07204fb50e1020a0f5bfbbd5c9)

2016-07-23 15:56 +0000 [40aa28131b]  George Joseph <gjoseph@digium.com>

	* format_ogg_opus: New format

	  Add Ogg/Opus playback support.

	  This uses libopusfile in order to be able to read .opus files and play
	  them back.

	  Writing/recording support is not present at this time.

	  ASTERISK-26409

	  Change-Id: I8815d23345108d8ca7c0bd640f6a1ce6b4f56955
	  (cherry picked from commit daee8bbd5209b4158bc1785eede845a26e6cbeaa)

2016-09-24 19:05 +0000 [43901e9418]  George Joseph <gjoseph@digium.com>

	* build_tools:  Add ability to download variants to download_externals

	  Some external packages have multiple variants that apply to different
	  builds of asterisk.  The DPMA for instance has a "bundled" variant that
	  needs to be downloaded if asterisk was configured with
	  --with-pjproject-bundled.

	  There are 2 ways to specify variants:

	  If you need the user to make the decision about which variant to
	  download, simply create multiple menuselect "member" entries like so...

	  <member name="res_digium_phone" displayname="..snipped..">
	    <support_level>external</support_level>
	    <depend>xmlstarlet</depend>
	    <depend>bash</depend>
	    <defaultenabled>no</defaultenabled>
	  </member>

	  <member name="res_digium_phone-bundled" displayname="..snipped..">
	    <support_level>external</support_level>
	    <depend>xmlstarlet</depend>
	    <depend>bash</depend>
	    <defaultenabled>no</defaultenabled>
	  </member>

	  Note that the second entry has "-<variant>" appended to the name.
	  You can then use the existing menuselect facilities to restrict which
	  members to enable or disable.  Youy probably don't want the user to
	  enable multiple at the same time.

	  If you want to hide the details of the variants, the better way to
	  do it is to create 1 member with "variant" elements.

	  <member name="res_digium_phone" displayname="..snipped..">
	    <support_level>external</support_level>
	    <depend>xmlstarlet</depend>
	    <depend>bash</depend>
	    <defaultenabled>no</defaultenabled>
	    <member_data>
	      <downloader>
	        <variants>
	          <variant tag="bundled"
	            condition='[[ "$PJPROJECT_BUNDLED" = "yes" ]]'/>
	        </variants>
	      </downloader>
	    </member_data>
	  </member>

	  The condition must be a bash expression suitable for use with an "if"
	  statement.  Any environment variable can be used plus those available
	  in makeopts.

	  In this case, if asterisk was configured with --with-pjproject-bundled
	  the bundled variant will be automatically downloaded.  Otherwise the
	  normal version will be downloaded.

	  Change-Id: I4de23e06d4492b0a65e105c8369966547d0faa3e

2016-09-23 09:54 +0000 [5dd99465d3]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Resolve externhost not to IPv6; instead go for IPv4.

	  For the channel driver chan_sip, you specify externhost=example.com in sip.conf
	  when your Asterisk is behind a NAT and your IP address is assigned dynamically.
	  Or stated differently: You do not have a static IP address to use "externaddr"
	  directly. This NAT support is quite handy but just about IPv4. Previously,
	  Asterisk resolved "externhost" to any IP version. When the first DNS answer
	  resolved to an IPv6, Asterisk sent an IPv6 in SIP/SDP for origin (o=) and
	  connection (c=). This happened in outgoing SIP-REGISTER and while answering
	  SIP-INVITE. If the remote peer is IPv4-only, it might not handle o=/c= with an
	  IPv6. This change makes sure, no IPv6 is resolved anymore for "externhost".

	  ASTERISK-18232 #close
	  Reported by: Jacek Kowalski
	  Tested by: Alexander Traud
	  patches:
	   changes.patch submitted by Alessandro Crespi

	  Change-Id: If68eedbeff65bd1c1d8a9ed921c02ba464b32dac

2016-09-20 09:42 +0000 [d425971009]  George Joseph <gjoseph@digium.com>

	* chan_sip:  Address runaway when realtime peers subscribe to mailboxes

	  Users upgrading from asterisk 13.5 to a later version and who use
	  realtime with peers that have mailboxes were experiencing runaway
	  situations that manifested as a continuous stream of taskprocessor
	  congestion errors, memory leaks and an unresponsive chan_sip.

	  A related issue was that setting rtcachefriends=no NEVER worked in
	  asterisk 13 (since the move to stasis).  In 13.5 and earlier, when a
	  peer tried to register, all of the stasis threads would block and
	  chan_sip would again become unresponsive.  After 13.5, the runaway
	  would happen.

	  There were a number of causes...
	  * mwi_event_cb was (indirectly) calling build_peer even though calls to
	    mwi_event_cb are often caused by build_peer.
	  * In an effort to prevent chan_sip from being unloaded while messages
	    were still in flight, destroy_mailboxes was calling
	    stasis_unsubscribe_and_join but in some cases waited forever for the
	    final message.
	  * add_peer_mailboxes wasn't properly marking the existing mailboxes
	    on a peer as "keep" so build_peer would always delete them all.
	  * add_peer_mwi_subs was unsubscribing existing mailbox subscriptions
	    then just creating them again.

	  All of this was causing a flood of subscribes and unsubscribes on
	  multiple threads all for the same peer and mailbox.

	  Fixes...
	  * add_peer_mailboxes now marks mailboxes correctly and build_peer only
	    deletes the ones that really are no longer needed by the peer.
	  * add_peer_mwi_subs now only adds subscriptions marked as "new" instead
	    of unsubscribing and resubscribing everything.  It also adds the peer
	    object's address to the mailbox instead of its name to the subscription
	    userdata so mwi_event_cb doesn't have to call build_peer.

	  With these changes, with rtcachefriends=yes (the most common setting),
	  there are no leaks, locks, loops or crashes at shutdown.

	  rtcachefriends=no still causes leaks but at least it doesn't lock, loop
	  or crash.  Since making rtcachefriends=no work wasnt in scope for this
	  issue, further work will have to be deferred to a separate patch.

	  Side fixes...
	   * The ast_lock_track structure had a member named "thread" which gdb
	     doesn't like since it conflicts with it's "thread" command.  That
	     member was renamed to "thread_id".

	  ASTERISK-25468 #close

	  Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0

2016-09-22 01:40 +0000 [18a8ca06eb]  Aaron An <anjb@ti-net.com.cn>

	* channels/chan_pjsip: fix HANGUPCAUSE function bug.

	  HANGUPCAUSE not return 'SIP 200 Ok' when dialed channel answered.
	  This patch change the call order of ast_queue_control_data
	  and ast_queue_control in chan_pjsip_incoming_response.

	  ASTERISK-26396 #close
	  Reported by: AaronAn
	  Tested by: AaronAn

	  Change-Id: Ide2d31723d8d425961e985de7de625694580be61

2016-09-21 14:24 +0000 [a805d779e8]  Joshua Colp <jcolp@digium.com>

	* core: Ensure presencestate subtype and message are NULL.

	  When retrieving presence state information there is no
	  guarantee that the subtype and message passed in are
	  set to NULL. This change ensures they are.

	  ASTERISK-26397 #close

	  Change-Id: If38cd730e409e9a9b6eb9adef6591d15a9e61f86

2016-09-21 10:48 +0000 [077caf566e]  Joshua Colp <jcolp@digium.com>

	* res_odbc: Make pooling option deprecation notice more useful.

	  This changes the notice for the deprecation of the old
	  pooling options to point to the new option for doing
	  pooling. This gives a clearer direction as to what to
	  look into.

	  ASTERISK-26389 #close

	  Change-Id: I2ca9cdfdcd75aec170a7db9d5ff69a4cd25b7c10

2016-09-21 08:46 +0000 [78b6190a11]  Joshua Colp <jcolp@digium.com>

	* odbc: Remove options that are no longer applicable.

	  The pooling, shared_connection, limit, and idlecheck options
	  are no longer used in res_odbc.

	  ASTERISK-26389

	  Change-Id: I2fde7b467d01f9d1c82cc0a339bb4f7e1dd6bbe6

2016-08-16 15:21 +0000 [923edf2596]  Corey Farrell <git@cfware.com>

	* logger: Simplify ast_callid handling code.

	  Routines responsible for managing ast_callid's are overly complicated.
	  This is left-over code from when ast_callid was an AO2 object.  Now that
	  it is an integer the code can be reduced.

	  ast_callid handler code no longer prints it's own error message upon failure
	  to allocate threadstorage as ast_calloc would have already printed a
	  message.  Debug messages that were printed when TEST_FRAMEWORK was
	  enabled have been also been removed.

	  Change-Id: I65a768a78dc6cf3cfa071e97f33ce3dce280258e

2016-09-20 15:17 +0000 [5cb905a227]  Corey Farrell <git@cfware.com>

	* core: Fix LOW_MEMORY missing symbol ast_pbx_uuid_get.

	  Move the function outside the conditional block that excludes
	  LOW_MEMORY.

	  ASTERISK-26273 #close

	  Change-Id: Ic290fa128222c410c3531107e30efacabc8493b4

2016-09-20 09:22 +0000 [00f1d05d34]  Corey Farrell <git@cfware.com>

	* logger: Always enable verbose for console channel.

	  Previous versions of Asterisk did not require verbose to be specified in
	  logger.conf for the console channel, if it was requested by command line
	  or asterisk.conf it just worked.  This change causes Asterisk to always
	  enable verbose in the console channel level mask.  Verbose is displayed
	  on consoles if requested by command line, option_verbose or 'core set
	  verbose'.

	  This also delays initialization of the logger until after threadstorage
	  is initialized.  Initializing too early can cause messages to be printed
	  multiple times to the console (stdout).

	  ASTERISK-26391 #close

	  Change-Id: I52187d67c2fcb3efd5561bf04b3e5e23e5ee8a04

2016-09-20 10:16 +0000 [74f562a8e2]  Corey Farrell <git@cfware.com>

	* logger: Fix default console settings.

	  When logger.conf is missing or invalid we should be printing notices,
	  warnings and errors to the console.  The logmask was incorrectly
	  calculated.

	  Change-Id: Ibaa9465a8682854bc1a5e9ba07079bea1bfb6bb3

2016-09-19 14:21 +0000 [0bc9912739]  Walter Doekes <walter+github@wjd.nu>

	* asterisk.c: Non-root users also get the astcanary after core restart.

	  Without this change, a 'core restart' would kill the astcanary forever
	  if you're not running as root. Both with and without this patch, the
	  scheduling priority was still SCHED_RR after restart.

	  Additionally, the astcanary is now spawned if you start with high
	  priority and Asterisk doesn't get a chance to lower it. For example
	  through: `chrt -r 10 sudo -u asterisk asterisk -c`

	  Also reap killed astcanary processes on core restart.

	  ASTERISK-26352 #close

	  Change-Id: Iacb49f26491a0717084ad46ed96b0bea5f627a55

2016-09-19 09:40 +0000 [bffaf46690]  Walter Doekes <walter+github@wjd.nu>

	* asterisk.c: When astcanary dies on linux, reset priority on all threads.

	  Previously only the canary checking thread itself had its priority set
	  to SCHED_OTHER. Now all threads are traversed and adjusted.

	  ASTERISK-19867 #close
	  Reported by: Xavier Hienne

	  Change-Id: Ie0dd02a3ec42f66a78303e9c1aac28f7ed9aae39

2016-09-12 18:00 +0000 [2820b13393]  Richard Mudgett <rmudgett@digium.com>

	* res_config_odbc.c: Fix buffer size limitation creating invalid SQL.

	  Creating ODBC SQL queries resulted in queries too large to fit into the
	  supplied buffer.  The resulting truncated buffer contained an invalid SQL
	  query.

	  * Made SQL query generation code use a thread storage buffer that can
	  increase in size as needed.

	  * Fixed bad multi-line warning messages.

	  ASTERISK-26263 #close
	  Reported by: Jeppe Ryskov Larsen

	  Change-Id: I23f3cdd43c2dac80bed3ded4dd77d18cb17f21ae

2016-09-14 06:53 +0000 [0376af9519]  Joshua Colp <jcolp@digium.com>

	* rtp: Only accept the first payload for a format in SDP.

	  When receiving an SDP offer with multiple payloads for
	  the same format we would generate an answer with the first
	  payload, but during the payload crossover operation
	  (to set the payloads for receiving) we would remove all
	  payloads but the last. This would result in incoming
	  traffic being matched against the wrong format and outgoing
	  traffic being sent using the wrong payload.

	  This change makes it so that once a format has a payload
	  number put into the mapping all subsequent ones are ignored.
	  This ensures there is only ever one payload in the mapping
	  and that it is the payload placed into the answer SDP.

	  ASTERISK-26365 #close

	  Change-Id: I1e8150860a3518cab36d00b1fab50f9352b64e60

2016-09-14 08:42 +0000 [9d894ee0a1]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_multihomed: Change Contact port to listening port.

	  The res_pjsip_multihomed module determines what interface and transport
	  a request is going out on and updates the SIP message accordingly with
	  the address information. This currently incorrectly updates the Contact
	  header for connectionful protocols to the ephemeral connection port,
	  instead of the bound address for the listening socket which can actually
	  accept the connection back. If the remote side attempts to connect back on
	  the epehemeral port it will fail.

	  This change makes it so the port is updated to the bound port on
	  connectionful protocols and is maintained on UDP (as there can be
	  multiple of those).

	  ASTERISK-26374 #close

	  Change-Id: I50f8dab65b9f75117d73ba5f6bbcf6c9871854ab

2016-09-07 14:48 +0000 [47c527df0a]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Prevent SERVFAIL from marking name server bad

	  A name server that returns "Server Failure" is indicating only that
	  the server couldn't process that particular request.  We should NOT
	  assume that the name server is incapable of serving other requests.

	  Here's the scenario we've been encountering...

	  * 2 local name servers configured in resolv.conf.
	  * An OPTIONS request causes a request for A and AAAA records to go out
	    to both nameservers.
	  * The A responses both come back successfully resolved.
	  * Because of an issue at some upstream nameserver, the AAAA responses
	    for that particular query come back as "SERVFAIL" from both local
	    name servers.
	  * Both local servers are marked as bad and no further queries can be
	    sent until the 60 second ttl expires.  Only previously cached results
	    can be used.
	  * In this case, 60 seconds is just enough time for another OPTIONS
	    request to go out to the same host so the cycle repeats.

	  We could set the bad ttl really low but that also affects REFUSED and
	  NOTAUTH which probably DO signal a real server issue.  Besides, even
	  a really low bad ttl would be an issue on a pbx.

	  Although we use our own resolver in 14 and master and don't have this
	  issue there, Teluu has merged this patch upstream so it's appropriate
	  to cherry-pick to 14 and master to keep pjproject consistent.


	  Change-Id: Ie03ba902288e274aff23f9b9bb2786e1e8be09e0

2016-09-12 07:37 +0000 [d3ddf4b0fd]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* cdr_mysql: fix UTC support

	  * Make 'cdrzone=UTC' work properly.
	  * Fix the documentation of cdr_mysql.conf: it's cdrzone and not timezone

	  ASTERISK-26359 #close

	  Change-Id: I2a6f67b71bbbe77cac31a34d0bbfb1d67c933778

2016-06-27 14:26 +0000 [07b95f7c65]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* sd_notify (systemd status notifications) support

	  sd_notify() is used to notify systemd of changes to the status of the
	  process. This allows the systemd daemon to know when the process
	  finished loading (and thus only start another program after Asterisk has
	  finished loading).

	  To use this, use a systemd unit with 'Type=notify' for Asterisk.

	  This commit also adds the function ast_sd_notify(), a wrapper around
	  sd_notify that does nothing if not built with systemd support.

	  Also adds support for libsystemd detection in the configure script.

	  Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811

2016-09-09 06:35 +0000 [bc81765bb4]  Timo Teräs <timo.teras@iki.fi>

	* Fix showing of swap details when sysinfo() is available

	  If sysinfo() is available, but not sysctl() or swapctl() the
	  printing code for swap buffer sizes is incorrectly omitted.
	  The above condition happens with musl c-library.

	  Fix #if rule to consider defined(HAVE_SYSINFO). And also
	  remove the redundant || defined(HAVE_SYSCTL) which was
	  incorrectly there to start with. Now swap information is
	  displayed only if an actual libc function to get it is
	  available.

	  This also fixes warnings previously seen with musl libc:

	     [CC] asterisk.c -> asterisk.o
	  asterisk.c: In function 'handle_show_sysinfo':
	  asterisk.c:773:6: warning: variable 'totalswap' set but not used
	   [-Wunused-but-set-variable]
	    int totalswap = 0;
	        ^~~~~~~~~
	  asterisk.c:770:11: warning: variable 'freeswap' set but not used
	   [-Wunused-but-set-variable]
	    uint64_t freeswap = 0;
	             ^~~~~~~~

	  Change-Id: I1fb21dad8f27e416c60f138c6f2bff03fb626eca

2016-09-14 07:59 +0000 [89764f7ae9]  Joshua Colp <jcolp@digium.com>

	* rtp: Preserve timestamps on video frames.

	  Currently when receiving video over RTP we store only
	  a calculated samples on the frame. When starting the video
	  it can take some time for this calculation to actually yield
	  a value as it requires constant changing timestamps. As well
	  if a video frame passes over multiple RTP packets this calculation
	  will fail as the timestamp is the same as the previous RTP
	  packet and the number of samples calculated will be 0.

	  This change preserves the timestamp on the frame and allows
	  it to pass through the core. When sending the video this timestamp
	  is used instead of a new one being calculated.

	  ASTERISK-26367 #close

	  Change-Id: Iba8179fb5c14c9443aee4baf670d2185da3ecfbd

2016-09-14 09:51 +0000 [5f54ac3a80]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_transport_management: Convert time in log message to seconds.

	  ASTERISK-26375 #close

	  Change-Id: I46496af5cae41413e76d44d2068a7431279f09dc

2016-09-13 05:34 +0000 [6ba68b486e]  Steve Davies <steve@one47.co.uk>

	* chan_sip: Fix session timeout on retransmit of non-UDP packets

	  Change-Id I1cd33453c77c56c8e1394cd60a6f17bb61c1d957 Enable Session-Timers for
	  SIP over TCP (and TLS) also disables SIP retransmits in chan_sip for non-UDP
	  connections, allowing the TCP layer to handle the retransmits. Unfortunately,
	  this caused sessions to be terminated with a retransmit timeout becasue it
	  stopped at the point of the first retrans call.

	  This patch waits for the 64*T1 timer to expire instead.

	  ASTERISK-19968

	  Change-Id: I844f26801aada10bc94e9bebe6e151f0a8443204

2016-09-13 06:08 +0000 [e3487b9360]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Don't assume a request will have any addresses.

	  When performing DNS resolution the failover code present in
	  res_pjsip currently assumes that a request will always have
	  at least one viable address. In practice this is not true.
	  A domain may be used that has no records.

	  The code now checks that at least one address exists on the
	  request which prevents looping.

	  ASTERISK-26364 #close

	  Change-Id: Ic0761b0264864acd85915c94d878a81624940f4c

2016-09-12 12:25 +0000 [7d7b23f04f]  Richard Mudgett <rmudgett@digium.com>

	* app_queue: Fix CLI "queue show" and AMI Queues action output truncation.

	  The output of CLI "queue show" and AMI Queues action is truncated and
	  "failed to extend from 240 to 327" messages are generated if the queue
	  member and interface names are lengthy.

	  * Increase the string buffer size from 240 to 512 in order to accommodate
	  for more information fields added to the output since v1.8.

	  ASTERISK-26360 #close
	  Reported by: Richard Mudgett

	  Change-Id: Id99c03cf5362453b80491a4b3b0434cb67aa966d

2016-09-12 03:28 +0000 [740292e6ae]  Walter Doekes <walter+github@wjd.nu>

	* chan_sip: Allow target refresh (Contact update) on re-INVITE.

	  Previously, the Contact was stored only on initial INVITE and on any
	  18X and 200. That meant that after re-INVITEs from *us* the Contact
	  could get updated, but after re-INVITEs from the *peer*, it did not.

	  This changeset fixes this inconsistency, properly allowing target
	  refreshes through re-INVITES (RFC3261, 12.2).

	  If your strictrtp setting allows it, this change allows you to switch
	  the source IP of a connected/calling device mid-call with a simple
	  re-INVITE from the new IP.

	  ASTERISK-26358 #close

	  Change-Id: Ibb8512054ab27c8c3d2514022568fde943bf2435

2016-08-31 15:22 +0000 [82ec58aa91]  Richard Mudgett <rmudgett@digium.com>

	* sip_to_pjsip.py: Map legacy_useroption_parsing.

	  Map the sip.conf general section legacy_useroption_parsing to the
	  new pjsip.conf global ignore_uri_user_options.

	  ASTERISK-26316
	  Reported by: Kevin Harwell

	  Change-Id: I78108a31995db19d41f4e1a07b3324692c5363fc

2016-08-29 18:08 +0000 [ba362822f3]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Add ignore_uri_user_options option.

	  This implements the chan_sip legacy_useroption_parsing option but with a
	  better name.

	  * Made the caller-id number and redirecting number strings obtained from
	  incoming SIP URI user fields always truncated at the first semicolon.
	  People don't care about anything after the semicolon showing up on their
	  displays even though the RFC allows the semicolon.

	  ASTERISK-26316 #close
	  Reported by: Kevin Harwell

	  Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62

2016-09-09 06:26 +0000 [56caf5402c]  Walter Doekes <walter+github@wjd.nu>

	* contrib: Let safe_asterisk script continue without /dev/tty9.

	  If you use the safe_asterisk script, it uses hardcoded defaults before
	  running configurable values from /etc/asterisk/startup.d. The hardcoded
	  default has TTY=9. Some containerized environments don't have such a
	  TTY, and safe_asterisk would stop.

	  The custom configuration from /etc/asterisk/startup.d/* isn't read until
	  after it stopped, so changing TTY in a custom config did not help.

	  This changeset changes safe_asterisk to continue if the TTY setting was
	  untouched and /dev/tty9 and /dev/vc/9 aren't found.

	  Change-Id: I2c7cdba549b77f418a0af4cb1227e8e6fe4148fc

2016-09-09 05:39 +0000 [901e612739]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Only invoke unidentified endpoint logic when unidentified.

	  The code was incorrectly invoking the unidentified logic when
	  an endpoint had actually been identified, causing log messages
	  to be output.

	  ASTERISK-26349 #close

	  Change-Id: Id8104fc9e3d138d5e8b6f6977ecc08765fd17d4f

2016-08-29 22:26 +0000 [2a50c29101]  Aaron An <anjb@ti-net.com.cn>

	* res/res_pjsip: Add preferred_codec_only config to pjsip endpoint.

	  This patch add config to pjsip by endpoint.
	  ;preferred_codec_only=yes
	  ; Respond to a SIP invite with the single most preferred codec
	  ; rather than advertising all joint codec capabilities. This
	  ; limits the other side's codec choice to exactly what we prefer.

	  ASTERISK-26317 #close
	  Reported by: AaronAn
	  Tested by: AaronAn

	  Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762

2016-08-16 15:34 +0000 [28b2aeba0b]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Do not crash on ACKs from unknown endpoints.

	  The endpoint identification PJSIP module is intended to identify which
	  endpoint an incoming request is from. If an endpoint is not identified,
	  then an artificial endpoint is used in its place when proceeding.

	  The problem is that the ACK request type is an exception to the rule.
	  The artificial endpoint is not used when processing an ACK. This results
	  in the possibility of having a NULL endpoint being used further on.

	  The reason ACK is an exception is an attempt not to spam security logs
	  with unidentified requests. Presumably, you've already logged the
	  unidentified request on the preceeding INVITE.

	  Up until Asterisk 13.10, retrieving a NULL endpoint in this fashion
	  didn't cause an issue. A new change in 13.10 added endpoint ACL checking
	  shortly after endpoint identification. Because we are accessing a NULL
	  endpoint, this ACL check resulted in a crash.

	  The fix here is to be sure to retrieve the artificial endpoint for all
	  request types. ACKs still do not generate unidentified request security
	  events.

	  ASTERISK-26264 #close
	  Reported by nappsoft

	  AST-2016-006

	  Change-Id: Ie0c795ae2d72273decb972dd74b6a1489fb6b703

2016-08-23 06:35 +0000 [82a3d659dc]  Joshua Colp <jcolp@digium.com>

	* chan_sip: Don't allocate new RTP instances on top of old ones.

	  In some scenarios dialog_initialize_rtp can be called multiple times on
	  the same dialog.  This can cause RTP instances to be leaked along with
	  multiple file descriptors for each instance.

	  This change makes it so the existing RTP instances are destroyed and
	  not overwritten, stopping the memory leak.

	  ASTERISK-26272 #close
	  patches:
	    ASTERISK-26272-13.patch submitted by Corey Farrell (license 5909)

	  Change-Id: Id529de1184c68f2f4d254ab41a1f458dafdb5f73

2016-09-06 11:46 +0000 [f369dbb705]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_messaging.c: Misc cleanups and fixes.

	  * Eliminated RAII_VAR in get_outbound_endpoint().

	  * Simplify update_to() coding.  However, this function can only be a NoOp
	  because the To string can only be a URI and not a name-address formatted
	  string.

	  * Simplify update_from() coding.  Also fixed a code path modifying the
	  from string when the caller could still want to use the original string.

	  * Fixed msg_data_create() incompletely removing the "pjsip:" to then add
	  back the "sip:" string if needed.  The code didn't handle the "pjsip:sip:"
	  case because it left the colon after pjsip in the string.

	  Change-Id: I68a09a665f6d4daa9eaa59069045ab69122e28db

2016-09-07 16:00 +0000 [2e5da0c715]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Allow global headers to be overridden.

	  Currently when you add global headers from the dialplan both
	  the header in the dialplan and the globally configured header
	  are added to the resulting SIP INVITE. This change makes it
	  so the headers in the dialplan take precedence and are the
	  only ones added.

	  Change-Id: I36f864298f38db3632ad503edc11267cb8ffb3ad

2016-08-10 15:14 +0000 [ac02bbd9a0]  Mark Michelson <mmichelson@digium.com>

	* ConfBridge: Make some announcements asynchronous.

	  Confbridge announcements tend to block a channel while they are being
	  played. In some circumstances, this is warranted since you want that
	  particular channel not to hear the announcement (Example: "John Doe has
	  entered the conference"). For others it makes less sense.

	  This change first introduces methods for playing sounds asynchronously
	  into the conference. This is very similar to how synchronous sounds are
	  played, except the channel initiating the playback does not wait for the
	  sound to complete before moving on.

	  Asynchronous announcements are used for two circumstances:
	  * Sounds played for a user after they have left the bridge
	  * Sounds that play first to a single user and then the rest of the
	    conference (if the channel and conference use the same language)

	  ASTERISK-26289 #close
	  Reported by Mark Michelson

	  Change-Id: Ie486bb3de1646d50894489030326a423e594ab0a

2016-07-19 09:41 +0000 [7a12355dbd]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Allow Preferred sRTP.

	  Following the Encrypt-all-the-things paradigm:

	  The user enters his SIP-URI and password. Thanks to DNS-NAPTR, the phone
	  determines SIP-over-TLS as preferred transport. In SIP/SDP, the phone starts
	  the call with a crypto attribute, but not as RTP/sAVP but the RTP/AVP profile
	  (sRTP is preferred aka optional; not mandatory). If the VoIP server does not
	  support sRTP and TLS, the phone shows an open padlock icon.

	  This paradigm is supported by several VoIP/SIP clients on default. Some
	  implementations even cannot be changed to RTP/sAVP. Therefore here, this
	  change allows Preferred sRTP for ingress. For egress, please, create a dial
	  plan which starts with RTP/SAVP, and when rejected tries again with RTP/AVP.

	  ASTERISK-20234 #close
	  Reported by: tootai
	  Tested by: tootai, Alexander Traud
	  patches:
	   srtp_patches.diff submitted by Matt Jordan

	  Change-Id: I42cb779df3a9c7b3dd03a629fb3a296aa4ceb0fd

2016-09-07 05:59 +0000 [baa7dba180]  Joshua Colp <jcolp@digium.com>

	* res_resolver_unbound: Fix config documentation.

	  The code was referencing the config section as 'globals'
	  instead of 'general'. This change swaps it over to 'general'.

	  Change-Id: I9dfe7788f41c4a6754c77e103880dc1a747de7fe

2016-09-06 15:25 +0000 [e769c19a31]  Matt Jordan <mjordan@digium.com>

	* res/res_stasis_playback: Cancel the entire playlist when a stop occurs

	  Prior to this patch, a stop issued by a delete of a Playback resource
	  (indicated by the control frame AST_CONTROL_STREAM_STOP) would only stop
	  the current media URI playing. Subsequent URIs specified by a playback
	  operation would then proceed on, even though we had just indicated to
	  the User that the Playback was finished *and* after they had just
	  'deleted' the resource. Whoops.

	  This patch corrects it by bailing out of the sequence of URIs to play if
	  one of them is terminated with an AST_CONTROL_STREAM_STOP indication.

	  ASTERISK-26341 #close

	  Change-Id: I2da9ec43545ba46cdfffe287c7e4907eae7fca42

2016-08-01 20:55 +0000 [6caf6bcdad]  George Joseph <gjoseph@digium.com>

	* build: Add download capability for external packages

	  The DPMA and g729a, silk, siren7 and siren14 codecs hosted at
	  http://downloads.digium.com/pub/telephony/ are now listed in the
	  "External" sections of the "Resource Modules" and "Codec Translators"
	  pages in menuselect.  Any that are selected will automatically be
	  downloaded and installed when "make install" is run.  Their LICENSE and
	  README (if avaialble) files will be installed to
	  ASTVARLIBDIR/documentation/thirdparty/<product_name>.

	  Example use with codecs:

	  The codecs/codecs.xml file is a menuselect style xml file that lists
	  the codecs to be included.  Their support levels are 'external', which
	  triggers the download and install, and defaultenabled is no.  Also
	  because codec_g729a is actually in a directory named codec_g729 on the
	  download server, the newly added 'member_data' element is used to
	  override the default of the directory name being the package name.  You
	  can use the 'directory_name' attribute to keep default base URL
	  (http://downloads.digium.com/pub/telephony/) but use the new directory,
	  or you use the 'remote_url' attribute to specify a full URL to the
	  download directory.  In this case, you must still follow the same
	  subdirectory naming conventions as that used for the packages located
	  at 'http://downloads.digium.com/pub/telephony'.

	  A new configure option '--with-externals-cache' was added and like
	  '--with-sounds-cache' it allows the installer to cache tarballs so
	  they're not downloaded every time.

	  To assist with the download and install process, each external package
	  now has a manifest.xml file that, among other things, contains a package
	  version and checksums for each file in the tarball.  The manifest is
	  saved to both the cache directory and ASTMODDIR and together with the
	  manifest.xml on the downloads site, tells the install scripts whether
	  a download and/or update is needed.

	  bash and xmlstarlet are required for downloader operation.  If they're
	  not installed, the external items in menuselect will be unavailable.

	  Change-Id: Id3dcf1289ffd3cb0bbd7dfab3cafbb87be60323a

2016-08-18 14:45 +0000 [7bb7f7b9d5]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_session: segfault on already disconnected session

	  On heavy loaded system the TCP/TLS incoming calls could be
	  disconnected by pjproject while these calls are being
	  processed by asterisk which could use the session's memory pools.
	  If the session in the disconnected state then the session memory
	  pools were already freed, so we get segfault.

	  This patch adds a lifetime control on an INVITE session to pjproject.
	  The lifetime of the session is manipulated by calling
	  pjsip_inv_add_ref/pjsip_inv_dec_ref.
	  This patch uses these functions to inform pjproject that the
	  session is in use.

	  This patch adds check if the session state is not disconnected
	  and also checks if the memory pool is not NULL.

	  This patch also places tasks 'session_end' and 'session_end_completion'
	  into session's serializer to avoid race condition.

	  ASTERISK-26291 #close

	  Change-Id: I4d28b1fb3b91f0492a911d110049d670fdc3c8d7

2016-09-06 02:41 +0000 [d80b28560c]  Walter Doekes <walter+github@wjd.nu>

	* chan_sip: Don't refuse calls with "optional crypto"; fall back to RTP.

	  Certain SNOM phones send so-called "optional crypto" in their SDP body.
	  Regular SRTP setup looks like this:

	      m=audio 64620 RTP/SAVP 8 0 9 99 3 18 4 101
	      a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...

	  SNOM-style "optional crypto" looks like this:

	      m=audio 61438 RTP/AVP 8 0 9 99 3 18 4 101
	      a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...

	  A crypto line is supplied, but the m-line does not have SAVP.

	  When res_srtp.so is *not* loaded, then chan_sip.so treats the optional
	  crypto as regular RTP, but when res_srtp.so *is* loaded, it refuses the
	  incoming call with the following message:

	      WARNING: process_sdp: Failed to receive SDP offer/answer with
	      required SRTP crypto attributes for audio

	  For platforms that want to start providing SRTP this presents a
	  compatibility problem.

	  This changeset lets chan_sip handle the SDP as if no crypto-line was
	  supplied: i.e. accept the call as regular RTP, just like it did before
	  res_srtp was loaded.

	  Now you'll get this informative warning instead:

	      WARNING: Ignoring crypto attribute in SDP because RTP transport is
	      insecure

	  ASTERISK-23989 #close
	  Reported by: Olle Johansson

	  Change-Id: I91a15ae05a0296e398d6b65f53bb11afde1d80e2

2016-09-03 16:04 +0000 [730cb3b0b7]  Matt Jordan <mjordan@digium.com>

	* apps/app_dial: Fix crash on non-connect call paths for Privacy/Screening option

	  In any scenario in which the callee is not connected to the caller, the
	  current code in app_dial will crash due to raising a Dial End Stasis
	  Message after the callee channel has been hung up. This patch corrects
	  the error by simply moving the explicit hangup of the callee (peer)
	  channel until after the dial end message.

	  ASTERISK-25691 #close

	  Change-Id: I816a414014424d0d8c80e2a3cbef13ef8c63798d

2016-09-03 16:02 +0000 [6e1a3b924e]  Matt Jordan <mjordan@digium.com>

	* apps/app_dial: Set the DIALSTATUS to NOANSWER on privacy option 5

	  If the callee selects option '5' using the Dial application's privacy
	  (P) option, the DIALSTATUS is erroneously set to ANSWER. This option
	  reflects the callee sending the caller to VoiceMail one time; the call
	  is definitely *not* ANSWERed in such a scenario. With this patch, the
	  DIALSTATUS is instead set to NOANSWER, which is the same DIALSTATUS that
	  is set when the 'send to VoiceMail every time' option is set.

	  ASTERISK-25691

	  Change-Id: Iaf0c9f0fa00545e7366443875e2bb7d9a89a1358

2016-08-30 16:40 +0000 [68c7694abb]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_registrar.c: Reduce stack usage in find_aor_name().

	  Change-Id: I8aebad1fdcf303bd115b59a4b57fbbd5b2267f09

2016-08-29 18:06 +0000 [35ce4d25c7]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_configuration.c: Ignore repeated identify by methods.

	  Change-Id: Ied0c06043d1dfef8fdc9c9a808cf89b118119838

2016-08-30 17:26 +0000 [c1e438fdf7]  Richard Mudgett <rmudgett@digium.com>

	* config_global.c: Comments and a default expression adjustment.

	  Change-Id: Ia6a58f8c73a30da6874b3f94364dce162d6f1ad3

2016-08-31 15:14 +0000 [edcf09e47c]  Richard Mudgett <rmudgett@digium.com>

	* sip_to_pjsip.py: Map canreinvite as directmedia alias.

	  Change-Id: I48b8e150f96a3d2a24d8fc25fbe4f5aff9f4a6b2

2016-08-31 15:37 +0000 [47336a0bdd]  Richard Mudgett <rmudgett@digium.com>

	* sip_to_pjsip.py: Fix typo converting outboundproxy registration.

	  Change-Id: I6f30e5f9fcf8469ba0079fbf884047d54c2c0b15

2016-08-31 15:13 +0000 [dba02575fc]  Richard Mudgett <rmudgett@digium.com>

	* sip_to_pjsip.py: Fix comment typo and tabs.

	  Change-Id: If35174614545727817d329c60ba4456c028941b5

2016-08-31 15:56 +0000 [4aaa27e532]  Richard Mudgett <rmudgett@digium.com>

	* Sample configs: Eliminate false multiline comment block starts.

	  Change-Id: Ie627def9604ae30abd80754f9e6f09874825aec6

2016-09-02 11:36 +0000 [c3b965a2c0]  Richard Mudgett <rmudgett@digium.com>

	* format_cap.c: Fix CLI "core show channeltype Surrogate" crash.

	  * Make ast_format_cap_get_names() NULL tolerant.

	  ASTERISK-26331 #close
	  Reported by: CGI.NET

	  Change-Id: Id67e93936dc8ec2a33a9d33655843d43b59285a3

2016-08-26 17:22 +0000 [e875e1c12a]  Corey Farrell <git@cfware.com>

	* sorcery: Create function ast_sorcery_lockable_alloc.

	  Create an alternative to ast_sorcery_generic_alloc which uses astobj2
	  shared locking. Use this new method for the 'struct ast_sip_aor' allocator.

	  Change-Id: I3f62f2ada64b622571950278fbb6ad57395b5d6f

2016-08-18 13:28 +0000 [131baf70d6]  Corey Farrell <git@cfware.com>

	* named_locks: Use ao2_weakproxy to deal with cleanup from container.

	  This allows standard ao2 functions to be used to release references to
	  an ast_named_lock.  This change can cause less frequent locking of the
	  global named_locks container.  The container is no longer locked when a
	  named_lock reference is being release except when this causes the
	  named_lock to be destroyed.

	  Change-Id: I644e39c6d83a153d71b3fae77ec05599d725e7e6

2016-08-26 13:18 +0000 [0c5b6e9ff5]  Corey Farrell <git@cfware.com>

	* astobj2: Support using a separate object for locking.

	  Create ao2_alloc_with_lockobj function to support shared locking.

	  Change-Id: Iba687eb9843922be7e481e23a32c0700ecf88a80

2016-08-31 12:23 +0000 [48fd4c815c]  Michael Kuron <m.kuron@gmx.de>

	* app_mp3: Use correct buffer size and the same sample rate as the channel

	  Previously, the buffer used for MP3 streamed from HTTP servers had a size of
	  1 MB. For 8 kHz mono audio at 16 bit resolution, such a buffer covers about 1
	  minute. Only when the buffer is full does audio start to play.
	  For MP3 files streamed from a server, that is usually not a big deal as long as
	  the connection to the server is fast enough to supply that much data within a
	  second or two. For MP3 live streams however, it takes 1 minute to download 1
	  minute of audio, so without this change, app_mp3 wasn't really usable for MP3
	  live streams.
	  This commit changes the buffer size so that it covers 6 seconds of an MP3 file
	  streamed from a server and 0.5 seconds of an MP3 live stream. The latter is
	  identified by the use of a .m3u file extension.

	  app_mp3 so far only supported 8 kHz audio.
	  Now it always runs at the sample rate of the channel.

	  ASTERISK-26085 #close

	  Change-Id: Id1ee274733cd804a0edecf7450329b72f1235af0

2016-08-31 05:33 +0000 [91993ebaa5]  Jean Aunis <jean.aunis@prescom.fr>

	* resource_channels.c: add hangup reason "answered_elsewhere".

	  In ARI, the channels API allows to hangup a channel with a hangup reason.
	  This commit adds a new reason "answered_elsewhere".
	  When using a SIP channel, this will eventually allow Asterisk to add a proper
	  "Reason" header to a CANCEL message.

	  ASTERISK-26321

	  Change-Id: Ia97675bd4acd6a7f58eb467953dfb94559f6583d

2016-08-26 10:39 +0000 [faf9bdebb7]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: qualify/unqualify added/deleted realtime endpoints

	  If the PJSIP endpoint's AOR with the permanent contact
	  was deleted from the realtime storage the res_pjsip module
	  continues trying to qualify this contact.
	  The error 'Unable to find an endpoint to qualify contact'
	  appeares every 'qualify_frequency' seconds.
	  This patch deletes this contact in this case.

	  The PJSIP endpoint's AOR with the permanent contact
	  is never qualified if it is added to realtime storage
	  after asterisk started.
	  This patch adds qualifying for the AOR's permanent contacts
	  on the first handling of this AOR.

	  ASTERISK-26319 #close

	  Change-Id: Ib93dded9121edb113076903d1aa95402f799f8fe

2016-08-22 17:08 +0000 [c98a047ee6]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Default endpoints to the "offline" status.

	  A recent change attempted to optimize startup by not updating contact
	  status. Instead, code responsible for qualifying contacts updates the
	  status as it becomes known. The code even accounts for contacts/AORs
	  that are not set to be qualified.

	  The problem, though, is when there are no contacts associated with an
	  endpoint. A common case is when an endpoint is set to register its
	  contacts but has not done so yet. In this case, prior to registration,
	  the endpoint's device state will appear to be "not in use" and hints
	  associated with that device will appear to be "idle". In actuality, the
	  device state and hint should both appear as "unavailable". The reason
	  for the failure is that the optimization change made all persistent
	  endpoint states set to "unknown".

	  The fix here is to change the hard-coded "unknown" to be "offline"
	  instead. The default state will be offline until the qualifying code
	  determines that the contact is actually online. This way, if there are
	  no contacts at all, then the state stays as offline, and device state
	  and hints appear correctly.

	  ASTERISK-26269 #close
	  Reported by nappsoft

	  Change-Id: Ie99b84169393983453076f5e9c0d35ff313a456a

2016-08-29 07:07 +0000 [5e0758575c]  Etienne Lessard <elessard@proformatique.com>

	* pbx.c: Prevent infinite recursion in manager_show_dialplan_helper.

	  Previously, if context A was including context B and context B was including
	  context A, i.e. if there was a circular dependency between contexts, then
	  calling manager_show_dialplan_helper could lead to an infinite recursion,
	  resulting in a crash.

	  This commit applies the same solution as the one implemented in the
	  show_dialplan_helper function. The manager_show_dialplan_helper and
	  show_dialplan_helper functions contain lots of code in common, but the former
	  was missing the "infinite recursion avoidance" code.

	  ASTERISK-26226 #close

	  Change-Id: I1aea85133c21787226f4f8442253a93000aa0897

2016-08-25 07:06 +0000 [c21e6764f1]  Joshua Colp <jcolp@digium.com>

	* app_queue: Ensure member is removed from pending when hanging up.

	  When dialing channels it is possible that they may not ever
	  leave the not in use state (Local channels in particular) by
	  the time we cancel them. If this occurs but we know they were
	  dialed we explicitly remove them from the pending members
	  container so that subsequent call attempts occur.

	  ASTERISK-26299 #close

	  Change-Id: I6ad0d17c36480c92cebf840626228ce3f7e4bd65

2016-08-26 14:34 +0000 [a7487e9261]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Disable srtp use by pjmedia

	  The reason for the disable is that while Asterisk works fine with older
	  libsrtp versions, newer versions of pjproject won't compile with them.
	  Debian 6 for instance, has libsrtp 1.4.4 which is older than what
	  pjproject is expecting.

	  We don't use most of pjmedia but we DO use it for SDP negotiation.
	  Luckily disabling srtp in pjmedia doesn't interfere with it's ability
	  to negitiate a secure channel.  The proper crypto attributes are
	  negotiated in both directions.

	  ASTERISK-26279 #close

	  Change-Id: Id25a92cdf3df97a26c53cffae65b6b82de33c8e2

2016-08-26 08:41 +0000 [858fa5eb2c]  Alexander Traud <pabstraud@compuserve.com>

	* channel: No hung-up on failing security requirements.

	  In your Diaplan, if you specify
	   same => n,Set(CHANNEL(secure_bridge_media)=1)
	   same => n,Set(CHANNEL(secure_bridge_signaling)=1)
	  only the SIP channel driver chan_sip supports this. All other channels drivers
	  like res_pjsip fail. In case of failure, the original sRTP source code released
	  the whole channel, even if not hung-up, yet. This change does not release the
	  channel but instead hangs-up the channel.

	  ASTERISK-26306

	  Change-Id: I0489f0cb660fab6673b0db8af027d116e70a66db

2016-08-20 09:04 +0000 [f35501b8c9]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Migrate IPv4/IPv6 (Dual Stack) configurations.

	  When using the migration script sip_to_pjsip.py, and your sip.conf is
	  configured with bindaddr=::, two transports are written to pjsip.conf, one for
	  0.0.0.0 (IPv4) and one for [::] (IPv6). That way, PJProject listens on the IPv4
	  and IPv6 wildcards; a IPv4/IPv6 Dual Stack configuration on a single interface
	  like in chan_sip.

	  Furthermore, the script internal functions "build_host" and "split_hostport"
	  did not parse Literal IPv6 addresses as expected (like [::1]:5060). This change
	  makes sure, even such addresses are parsed correctly.

	  ASTERISK-26309

	  Change-Id: Ia4799a0f80fc30c0550fc373efc207c3330aeb48

2016-08-04 20:11 +0000 [ea929d766d]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Cache global config options.

	  We may check a global config option hundreds of times a second or more.
	  Asking sorcery for the global configuration from the config files backend
	  involves several allocations and container traversals.  Using realtime
	  without a memory cache is a lot worse because you have to lookup in the
	  realtime database each time to reconstitute the sorcery object.  With a
	  memory cache for realtime, there is about the same amount of overhead as
	  for config files.  Either way, it is still fairly expensive to access the
	  sorcery object that much.

	  * Cache the global config options so we can access them faster.  You must
	  now always perform a res_pjsip reload to change the global options.

	  Change-Id: Ice16c7a4cbca4614da344aaea21a072b86263ef7

2016-08-23 11:02 +0000 [5eb6cb969f]  Richard Mudgett <rmudgett@digium.com>

	* res_fax: Fix deadlock in ast_channel_get_t38_state().

	  ast_channel_get_t38_state() calls ast_channel_queryoption() with
	  AST_OPTION_T38_STATE.  If the passed in channel is a local channel then a
	  deadlock can happen if a channel lock is held when called.

	  * Made ast_channel_get_t38_state() callers not hold a channel lock before
	  calling.

	  * Update ast_channel_get_t38_state() doxygen to note that no channel locks
	  can be held when calling the function.

	  ASTERISK-26203 #close
	  Reported by: Etienne Lessard

	  ASTERISK-24822 #close
	  Reported by: David Brillert

	  ASTERISK-22732 #close
	  Reported by: Richard Mudgett

	  Change-Id: I49fd76fa9af628b4198009b5c0b82c8b03681214

2016-08-23 10:39 +0000 [277a2d667a]  Richard Mudgett <rmudgett@digium.com>

	* res_fax: Fix deadlock setting FAXMODE channel variable.

	  ASTERISK-25980 added the FAXMODE channel variable to res_fax.c.
	  Unfortunately, it also introduced a deadlock potential because
	  set_channel_variables() which sets FAXMODE can be called during a
	  masquerade.  The ast_channel_get_t38_state() which gets the value used to
	  set FAXMODE cannot be called with the channel locked.  As a result, local
	  channels can deadlock because of how they must acquire the locks necessary
	  to operate.

	  The intent of FAXMODE is for dialplan to know how a fax was transferred
	  after the fax completes.  However, the previous patch sets FAXMODE to the
	  channel's current T.38 state AFTER the fax has completed and where T.38
	  may have already disconnected.

	  * Set FAXMODE based upon T.38 negotiations exchanged either with the fax
	  applications or the fax framehooks.

	  ASTERISK-26203
	  Reported by: Etienne Lessard

	  ASTERISK-24822
	  Reported by: David Brillert

	  ASTERISK-22732
	  Reported by: Richard Mudgett

	  Change-Id: Id525747254b64c1efe8b1b5973d52ff9719c2ae1

2016-08-22 12:31 +0000 [edca14c8a5]  Richard Mudgett <rmudgett@digium.com>

	* res_fax.c: Fix deadlock in fax_gateway_indicate_t38().

	  fax_gateway_indicate_t38() calls ast_indicate_data() which cannot be
	  called with any channel locks already held.  A deadlock can happen if the
	  function is operating on a local channel.

	  * Made fax_gateway_indicate_t38() unlock the channel before calling
	  ast_indicate_data() since fax_gateway_indicate_t38() is always called with
	  the channel locked.

	  * Made fax_gateway_indicate_t38() return void since nothing cared about
	  its return value.

	  ASTERISK-26203
	  Reported by: Etienne Lessard

	  ASTERISK-24822
	  Reported by: David Brillert

	  ASTERISK-22732
	  Reported by: Richard Mudgett

	  Change-Id: I701ff2d26c5fc23e0d5a48a3fd98759a9fd09407

2016-08-23 11:16 +0000 [141cd42880]  Richard Mudgett <rmudgett@digium.com>

	* res_fax.c: Add chan locked precondition comments.

	  Change-Id: Ic10ae434536bbf7fb7055d6ab36cc50b8748a4e7

2016-08-23 10:42 +0000 [b86771d1bf]  Richard Mudgett <rmudgett@digium.com>

	* ast_framehook_detach() must be called with the channel locked.

	  The framehook container could become corrupted if the channel lock is not
	  held before calling.

	  Change-Id: If0a1c7ba0484ed3a191106a7516526b905952584

2016-08-22 15:01 +0000 [5744f434f0]  Richard Mudgett <rmudgett@digium.com>

	* ast_framehook_attach() must be called with the channel locked.

	  The framehook container could become corrupted if the channel lock is not
	  held before calling.

	  Change-Id: I1a6b957a1f7b899eb29a186915f8cccab886a438

2016-08-17 02:51 +0000 [93b7533d74]  chris de rock <chris@derock.de>

	* app_macro: Consider '~~s~~' as a macro start extension.

	  As described in issue ASTERISK-26282 the AEL parser creates macros with
	  extension '~~s~~'.  app_macro searches only for extension 's' so the
	  created extension cannot be found.  with this patch app_macro searches for
	  both extensions and performs the right extension.

	  ASTERISK-26282 #close

	  Change-Id: I939aa2a694148cc1054dd75ec0c47c47f47c90fb

2016-08-24 04:44 +0000 [d2e03c252d]  Eugene <varnavruz@gmail.com>

	* chan_iax2: Set plaintext auth to deprecated as per ASTERISK-22820

	  Starting from draft 2 of RFC 5456 (October 23, 2006) plaintext auth
	  is not supported in IAX2 protocol. Please refer to section 8.6.13 of
	  RFC 5456.

	  But plaintext auth is still supported by Asterisk implementation of IAX2.
	  This support should be dropped.

	  Patch, based on asterisk-dev discussion, adds deprecation warning on
	  startup if 'auth' is set to 'plaintext', changes default values of
	  'auth' from 'md5, plaintext' to 'md5'.

	  Patch is safe in terms of backwards compatibility, will work even if
	  remote peers have auth=plaintext and we have defaults.

	  auth=plaintext setting will remain deprecated in Asterisk 14 and 15,
	  and IAX2 plaintext support will be removed in Asterisk 16.

	  ASTERISK-22820 #close

	  Change-Id: I5d2f3830cb57645604818f87518916e8a5c317bf

2016-08-24 14:42 +0000 [e40aa40aca]  George Joseph <gjoseph@digium.com>

	* res_rtp_multicast:  Fix SEGV in ast_multicast_rtp_create_options

	  ast_multicast_rtp_create_options now checks for NULL or empty options

	  Change-Id: Ib845eae46a67a9787e89a87ebd1027344e5e0362

2016-07-19 13:14 +0000 [2e79f52d71]  Alexander Traud <pabstraud@compuserve.com>

	* codecs: Add Codec 2 mode 2400.

	  ASTERISK-26217 #close

	  Change-Id: I1e45d8084683fab5f2b272bf35f4a149cea8b8d6

2016-08-10 15:14 +0000 [ded22c712a]  Mark Michelson <mmichelson@digium.com>

	* ConfBridge: Rework announcer channel methodology

	  NOTE: This patch was submitted earlier and reverted because of a failing
	  test. The test has been patched so that it adjusts for the changes here,
	  so this is being resubmitted for review.

	  One feature that confbridge has is the ability to play sounds to all
	  participants in the conference. Prior to this commit, the algorithm for
	  this was as follows:

	  * Grab the playback lock
	  * Push the conference announcer channel into the bridge
	  * Play back the sound
	  * Pull the conference announcer channel from the bridge
	  * Release the playback lock

	  The issue here is that the act of adding the playback channel to the
	  bridge and removing it for each announcement is expensive. Amongst the
	  expenses:

	  * The announcer channel is imparted into the bridge, meaning a new
	    thread is spun up for each playback.
	  * When the announcer is added or removed from the bridge, it results
	    in the BRIDGEPEER channel variable being set on all channels in the
	    bridge. This requires keeping the bridge locked and locking each
	    individual channel in order to set it.
	  * There's also just the general overhead of adding the channel and
	    removing it from the bridge. The bridge potentially has to reconfigure
	    every single time

	  With this commit, the paradigm for playing back announcements has
	  shifted.

	  * The announcer channel is now added to the bridge when the conference
	    is allocated, and it is hung up when the conference is destroyed.
	  * A taskprocessor is used to queue playbacks onto the announcer channel.
	    This keeps the behavior from before where playbacks do not overlap.
	  * The announcer channel is no longer placed into the bridge as
	    departable. Since we are not constantly removing the channel from
	    the bridge, it is safe to add the channel using an independent thread
	    and simply hang the channel up when it is time for the conference to
	    be destroyed.

	  The use of the taskprocessor for playbacks opens up the interesting
	  possibility of having asynchronous announcements played. In this commit,
	  however, the behavior is still exactly the same as it previously was.

	  ASTERISK-26289
	  Reported by Mark Michelson

	  Change-Id: Ica9fa4907c2f3728cdd1cf0bc564ef4eb40754a0

2016-08-23 05:54 +0000 [065d810d3f]  Joshua Colp <jcolp@digium.com>

	* Revert "ConfBridge: Rework announcer channel methodology"

	  This reverts commit 5aa877305223faab5a1119276a934893ab9dc138.

	  Change-Id: I9ab45776e54a54ecf1bac9ae62d976dec30ef491

2016-08-19 10:21 +0000 [41ee14bfae]  Alexei Gradinari <alex2grad@gmail.com>

	* compilation failed with -Werror=maybe-uninitialized

	  The compilation failed for devmode
	  --enable DONT_OPTIMIZE
	  --enable BETTER_BACKTRACES
	  --enable DO_CRASH
	  --enable TEST_FRAMEWORK

	  res_pjsip/pjsip_configuration.c: In function dtls_handler:
	  res_pjsip/pjsip_configuration.c:974:20: error:
	  back may be used uninitialized in this function [-Werror=maybe-uninitialized]
	  int size = strlen(front);
	             ^
	  cc1: all warnings being treated as errors

	  Change-Id: I7f082ead0312792a577ec7c73015ba64dabca580

2016-08-20 14:51 +0000 [eb0c9c476f]  David M. Lee <dlee@respoke.io>

	* res_odbc_transaction: add dep on generic_odbc

	  When res_odbc_transaction depended on res_odbc, it got the generic_odbc
	  headers and libs implicitly. Now that it no longer depends on res_odbc,
	  its dependency on generic_odbc must be explicit.

	  Change-Id: I9db88f7af7388437f49903d3008ba8d4890d5911

2016-08-20 11:18 +0000 [12752c64cc]  Alexander Traud <pabstraud@compuserve.com>

	* pjproject_bundled: Allow IPv4/IPv6 (Dual Stack) configurations.

	  PJProject supports a lot of platforms even Windows, some with different defaults
	  when it comes to IPv6. In many Linux platforms like Ubuntu 16.04 LTS,
	  "/proc/sys/net/ipv6/bindv6only" is set to 0 (false). Different than in Windows.

	  Because of this, if configured with just an IPv6 address/transport, PJProject
	  listens to both IPv4 and IPv6. However, this is not supported by the PJProject
	  team. As consequence, you end-up with IPv4-mapped IPv6 addresses in SDP,
	  incompatible with IPv4-only clients. Technically, you end-up with an IPv6-only
	  server which accepts incoming connections on IPv4.

	  If you try to configure two transports, one with IPv4 and one with IPv6 on the
	  same interface, as expected by the PJProject team, the IPv4 transport is not
	  able to bind because the IPv6 transport listens to both already.

	  One solution would be to change "/proc/sys/net/ipv6/bindv6only" system-wide.
	  Then, you are able to configure two transports, one for each IP version on the
	  same interface. That way, you get a server which works with IPv4 clients and
	  IPv6 clients at the same time over the same interface.

	  Here, this change sets this parameter directly within PJProject to match the
	  expectations of the PJProject team in any case. This allows IPv4/IPv6 Dual Stack
	  servers out of the box like in chan_sip. This change was accepted by the
	  PJProject team as <http://trac.pjsip.org/repos/changeset/5403> and is expected
	  to arrive in the next version, PJProject 2.6.0. Until then, this change is
	  incorporated in the bundled PJProject of Asterisk.

	  ASTERISK-26309

	  Change-Id: I3335d8718f79f4b2feae91b5b005a3ce684a63ae

2016-08-19 18:19 +0000 [55ccdf93c3]  Corey Farrell <git@cfware.com>

	* Fix checks for allocation debugging.

	  MALLOC_DEBUG should not be used to check if debugging is actually
	  enabled, __AST_DEBUG_MALLOC should be used instead.  MALLOC_DEBUG only
	  indicates that debugging is requested, __AST_DEBUG_MALLOC indicates it
	  is active.

	  Change-Id: I3ce9cdb6ec91b74ee1302941328462231be1ea53

2016-08-19 14:09 +0000 [8061d9f66f]  Corey Farrell <git@cfware.com>

	* Fix naming mismatch of allocator functions.

	  Allocator functions that take file/line/func parameters are prefixed
	  with single-underscore when MALLOC_DEBUG is not defined,
	  double-underscore when it is defined.  This change updates all
	  allocators that accept file/line/func to have the same prototype in
	  either ABI mode.  The parameter order of __ast_vasprintf and
	  __ast_asprintf in utils.h have been changed to match that of astmm.h.

	  End-use allocator macro's have been removed from astmm.h and moved to an
	  unconditional part of utils.h.

	  Change-Id: I823bb6ce2b5675b3a4735948f10a3b420e9a023a

2016-08-17 08:10 +0000 [c1b6a79686]  Torrey Searle <torrey@voxbone.com>

	* res_ari: Add http prefix to generated docs

	  updated the uri handler to include the url prefix of the http server
	  this enables res_ari to add it to the uris when generating docs

	  Change-Id: I279335a2625261a8492206c37219698f42591c2e
	  (cherry picked from commit 6f448f32fe9b7379e2630fab7b06205f901f2ded)

2016-08-19 03:59 +0000 [02a82f758e]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Add cert_file.

	  When using the migration script sip_to_pjsip.py, cert_file was not migrated to
	  pjsip.conf. A previous change regarding this contained a copy/paste error.

	  ASTERISK-22374

	  Change-Id: I0fa72e9412117d53b4284fc6b83fa5b2b95ba03b

2016-08-18 09:21 +0000 [1a9555f036]  Alexander Traud <pabstraud@compuserve.com>

	* sip.conf: tlsclientmethod is using sslv23 as default.

	  When 'tlsclientmethod' is not specified in sip.conf, chan_sip uses the OpenSSL
	  SSLv23_method. This was documented incorrectly in the file sip.conf.sample.

	  SSLv23_method got its name in the 90s. Today, with OpenSSL 1.0.2, this method
	  enables (just) the secure TLSv1.0 and TLSv1.2. Or stated differently, that
	  function should have been called 'secure_method' or 'automatic_method' back in
	  the 90s.

	  Consequently please, specify 'tlsclientmethod=tlsv1' in your sip.conf only if
	  you face a server which has problems like not falling back to TLSv1.0
	  automatically.

	  ASTERISK-24425

	  Change-Id: I502ce6146b4504cadfd3973af8d6ec3994f54fa3

2016-08-16 15:57 +0000 [53a2f7dc88]  Kevin Harwell <kharwell@digium.com>

	* res_format_attr_g729: Add annexb=no format parameter to SDPs

	  Historically, Asterisk has always specified annexb=no for the g729 format.
	  However, when using res_pjsip no format attribute was specified. This patch
	  makes it so the SDP now contains a format attribute line with annexb=no.

	  Note, that this means only g729a is negotiated. Even for pass through support.
	  According to rfc7261 the type of annex used (a or b) is dependent upon the
	  answerer. However, Asterisk being a back to back user agent makes this tricky
	  to support at this time, thus we only allow annex 'a' for now.

	  ASTERISK-26228 #close
	  patches:
	    res_format_attr_g729.c submitted by Jason Parker (license 4993)

	  Change-Id: I76bc20cc0a01af01536e9915afef319c269c22d0

2016-08-18 17:02 +0000 [7ea133f2ab]  Kevin Harwell <kharwell@digium.com>

	* rest-api: Swagger scripts were not replacing format variable in file brief

	  Given resource paths did not have 'json' substituted in for the '{format}'. For
	  some auto generated documentation/comment strings it resulted in something like
	  the following:

	  "... REST handler for /api-docs/sounds.{format}"

	  This patch makes sure the resource api's path is properly substituted.

	  ASTERISK-25472 #close

	  Change-Id: Ie3e950a35db4043e284019d6c9061f3b03922e23

2016-08-18 15:15 +0000 [c7ffd6111d]  George Joseph <gjoseph@digium.com>

	* res_odbc:  Correct the dependency relationship with res_odbc_transaction

	  The MODULEINFO dependencies between these 2 modules was reversed.
	  res_odbc should depend on res_odbc_transaction, not the other way
	  around.

	  ASTERISK-25984 #close

	  Change-Id: Ifcfbb49c0b51cf6640a5446d47cd6c48caf1331f

2016-08-18 12:04 +0000 [966527249e]  Kevin Harwell <kharwell@digium.com>

	* sip_to_pjsip: Set correct tls transport method

	  A recent update had a copy/paste error where the unused variable 'val' was
	  being passed to the set_value function instead of the 'method' value itself.

	  This patch passes in the right variable.

	  ASTERISK-22374

	  Change-Id: I895b7b3779ce4442bc58b8ec40d59dd29bb43f06

2016-08-10 15:14 +0000 [5aa8773052]  Mark Michelson <mmichelson@digium.com>

	* ConfBridge: Rework announcer channel methodology

	  One feature that confbridge has is the ability to play sounds to all
	  participants in the conference. Prior to this commit, the algorithm for
	  this was as follows:

	  * Grab the playback lock
	  * Push the conference announcer channel into the bridge
	  * Play back the sound
	  * Pull the conference announcer channel from the bridge
	  * Release the playback lock

	  The issue here is that the act of adding the playback channel to the
	  bridge and removing it for each announcement is expensive. Amongst the
	  expenses:

	  * The announcer channel is imparted into the bridge, meaning a new
	    thread is spun up for each playback.
	  * When the announcer is added or removed from the bridge, it results
	    in the BRIDGEPEER channel variable being set on all channels in the
	    bridge. This requires keeping the bridge locked and locking each
	    individual channel in order to set it.
	  * There's also just the general overhead of adding the channel and
	    removing it from the bridge. The bridge potentially has to reconfigure
	    every single time

	  With this commit, the paradigm for playing back announcements has
	  shifted.

	  * The announcer channel is now added to the bridge when the conference
	    is allocated, and it is hung up when the conference is destroyed.
	  * A taskprocessor is used to queue playbacks onto the announcer channel.
	    This keeps the behavior from before where playbacks do not overlap.
	  * The announcer channel is no longer placed into the bridge as
	    departable. Since we are not constantly removing the channel from
	    the bridge, it is safe to add the channel using an independent thread
	    and simply hang the channel up when it is time for the conference to
	    be destroyed.

	  The use of the taskprocessor for playbacks opens up the interesting
	  possibility of having asynchronous announcements played. In this commit,
	  however, the behavior is still exactly the same as it previously was.

	  ASTERISK-26289
	  Reported by Mark Michelson

	  Change-Id: Ic5cd2c4b98a1eaa1715eb7a5b35d62f1a76d78a5

2016-08-18 08:19 +0000 [e55d1e47aa]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Map the TLS method correctly.

	  When using the migration script sip_to_pjsip.py and tlsclientmethod is not set
	  in sip.conf, the default value of chan_sip (sslv23) is copied to pjsip.conf, to
	  overwrite the default of the PJProject (tlsv1). This makes sure, res_pjsip is
	  offering/using not just TLSv1.0 but TLSv1.2 as well.

	  ASTERISK-22374

	  Change-Id: Ie530a3dae9926ae14f3920a21be1e2edb15bda4f

2016-08-18 08:17 +0000 [da14c439a3]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Add compactheaders, timerb, timert1, and useragent.

	  When using the migration script sip_to_pjsip.py, no section of type=system or
	  type=general were created. Therefore the keys compactheaders, timerb, timert1,
	  and useragent were not migrated to pjsip.conf.

	  ASTERISK-22374

	  Change-Id: I318a453843227ea36bf130d392d4abd7bd26b5a1

2016-08-18 08:16 +0000 [675721a7ab]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Map (session-)timers correctly.

	  When using the migration script sip_to_pjsip.py, session-timers=accept and
	  session-timers=refuse were mapped to wrong values.

	  ASTERISK-22374

	  Change-Id: Ie4e90d5f6a29aff07837b7fe5bc8aea5fb6fc092

2016-08-18 08:15 +0000 [acc5237e91]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Write username even without authname.

	  When using the migration script sip_to_pjsip.py, now the (mandatory) username is
	  written to pjsip.conf, even if there was no (optional) authname in the register
	  string in sip.conf.

	  ASTERISK-22374

	  Change-Id: Ie53e1997104cd2674821688b8a8247249f5e156f

2016-08-18 08:14 +0000 [3eb02235f5]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Parse register even with transport.

	  When using the migration script sip_to_pjsip.py and the register string
	  started with a transport in sip.conf - like tls://... - register was not parsed
	  correctly and therefore not migrated correctly to pjsip.conf.

	  ASTERISK-22374

	  Change-Id: I44c12104eea2bd8558ada6d25d77edfecd92edd2

2016-08-18 08:13 +0000 [9907e2b1c1]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Write local_net, contact_acl, contact_deny, and contact_permit.

	  When using the migration script sip_to_pjsip.py, those keys got missing. These
	  keys might appear several times and the function "merge_value" tried to collect
	  those. However, because these keys have different names in sip.conf and
	  pjsip.conf, "merge_value" was not able to find the new key name in sip.conf.
	  This change lets "merge_value" search with the old key name in sip.conf and
	  write with the new key name in pjsip.conf.

	  ASTERISK-22374

	  Change-Id: Ie53c5278ae6f1cb8fa7e96c5289877d46981d9d2

2016-08-18 08:11 +0000 [c0e0075718]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Map externhost/ip to Transports.

	  When using the migration script sip_to_pjsip.py, the externhost or externip of
	  sip.conf were erroneously written to Endpoints instead to Transports.

	  ASTERISK-22374

	  Change-Id: I2c5873386cfc388899fa9cf2368639dd12f1b8e4

2016-08-18 08:04 +0000 [a937c2ccb1]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Add defaultexpiry, maxexpiry, and minexpiry.

	  When using the migration script sip_to_pjsip.py, defaultexpiry, maxexpiry, and
	  minexpiry were not migrated to pjsip.conf.

	  ASTERISK-22374

	  Change-Id: I007fbf543dcadc96fc3ed71c54da502bcb209b7b

2016-08-18 08:03 +0000 [163cc2d68f]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Write media_encryption.

	  When using the migration script sip_to_pjsip.py, encryption=yes got missing and
	  media_encryption=sdes was not written to pjsip.conf, because of a typo.

	  ASTERISK-22374

	  Change-Id: I0fc3e55dc512a57603ae0fef41baacccf2a35c05

2016-08-18 08:02 +0000 [d8b5970749]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Write cos and tos.

	  When using the migration script sip_to_pjsip.py, both tos_sip and cos_sip got
	  missed, because of a typo. Therefore, cos and tos were not written to
	  pjsip.conf. Furthermore, that revealed a misuse of an internal function, caused
	  by a copy-and-paste error.

	  ASTERISK-22374

	  Change-Id: Id245ebadf70ab9776eb280c026288540af3af5c2

2016-08-18 07:55 +0000 [38491401b5]  Alexander Traud <pabstraud@compuserve.com>

	* sip_to_pjsip: Add cert_file and ca_list_path.

	  When using the migration script sip_to_pjsip.py, cert_file and ca_list_path were
	  not migrated to pjsip.conf.

	  ASTERISK-22374

	  Change-Id: I4612877d190b7f86a48698cefbf5c4db6c265825

2016-08-16 15:36 +0000 [534063fd67]  George Joseph <gjoseph@digium.com>

	* res_pjsip:  Add contact_user to endpoint

	  contact_user, when specified on an endpoint, will override the user
	  portion of the Contact header on outgoing requests.

	  Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4

2016-08-17 14:13 +0000 [0b4fa65532]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Fix unbound srv failover tests.

	  Commit 1b666549f33d69dc080b212bf92126f3bc3a18b2 broke the srv failover
	  functionality if a TCP connection gets disconnected.  Under these
	  conditions, session_inv_on_state_changed() gets a
	  PJSIP_EVENT_TRANSPORT_ERROR and restarts the INVITE transaction on a new
	  transport.  Unfortunately, session_inv_on_tsx_state_changed() also gets
	  the same PJSIP_EVENT_TRANSPORT_ERROR event and unconditionally terminates
	  the session.

	  * Made session_inv_on_tsx_state_changed() complete terminating the session
	  on PJSIP_EVENT_TRANSPORT_ERROR only if the session state is still
	  PJSIP_INV_STATE_DISCONNECTED.

	  ASTERISK-26305 #close
	  Reported by: Richard Mudgett

	  Change-Id: If736e766b5c55b970fa38ca6c8a885caf27b897d

2016-08-11 12:10 +0000 [046069011b]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* followme: initialize all config items on reload

	  Some configuration directives were not initialized on reload, and hence
	  were not reset to default if they were removed from followme.conf.

	  ASTERISK-26288 #close

	  Change-Id: Ief829e16374ad1e0ecfd63e6ee4923b5a1d1c150

2016-08-17 06:12 +0000 [57f4e4428a]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Detect ca_list_path capabilities in external PJProject.

	  Since Asterisk 13.8, pj_ssl_cert_load_from_files2 got detected only in the
	  bundled PJProject but not in an external PJProject. Therefore, ca_list_path
	  could not be used in pjsip.conf. With this change, pj_ssl_cert_load_from_files2
	  is detected again to enable ca_list_path again.

	  ASTERISK-26303 #close

	  Change-Id: I4a4a0cdc5cdff33730911fb4cfc0498c069043d0

2016-08-16 12:24 +0000 [a5c0cf4922]  George Joseph <gjoseph@digium.com>

	* ari:  Add documentation that path parameters are case-sensitive

	  Added to api.wiki.mustache so that the generated object pages
	  have the notation in the table header as well as under each method
	  that has path parameters.

	  ASTERISK-25492 #close

	  Change-Id: I36c46c6dc0c9ac350470394a999a1b19ef3fcdaf

2016-08-15 15:29 +0000 [824a4e84d1]  Corey Farrell <git@cfware.com>

	* Refactor usage pattern of xmldoc info tag.

	  This updates func_channel.c and main/message.c to use a generic xpointer
	  include instead of including info from each channel driver.  Now the
	  name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in
	  documentation for func_channel.  Setting the name attribute of info to
	  MessageToInfo or MessageFromInfo causes it to be included in the
	  MessageSend application and AMI action.

	  Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea

2016-06-15 17:10 +0000 [957df73301]  Evgeniy Tsybra <cjack@yandex.ru>

	* chan_sip: Fix lastrtprx always updated

	  Packets are read regulary, when there is no data in buffer fr->frametype
	  is AST_FRAME_NULL. There was no check of frametype and lastrtprx always 
	  updated and, therefore, rtptimeout did not work at all.

	  ASTERISK-25270 #close

	  Change-Id: If3b5ca0dbb822582a86eb7d01dcae4e83448c41d

2016-08-10 14:41 +0000 [e85adbd947]  Alexei Gradinari <alex2grad@gmail.com>

	* core: Entity ID is not set or invalid

	  The Exchanging Device and Mailbox States could not working
	  if the Entity ID (EID) is not set manually and can't be obtained
	  from ethernet interface.

	  This patch replaces debug message to warning
	  and addes missing description about option 'entityid' to
	  asterisk.conf.sample.

	  With this patch the asterisk also:
	  (1) decline loading the modules which won't work without EID:
	      res_corosync and res_pjsip_publish_asterisk.
	  (2) warn if EID is empty on loading next modules:
	      pbx_dundi, res_xmpp

	  Starting with v197 systemd/udev will automatically assign "predictable"
	  names for all local Ethernet interfaces.
	  This patch also addes some new ethernet prefixes "eno" and "ens".

	  ASTERISK-26164 #close

	  Change-Id: I72d712f1ad5b6f64571bb179c5cb12461e7c58c6

2016-08-04 20:00 +0000 [13450c80ce]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_config.c: Cleanup ao2 container usage idioms.

	  Change-Id: Iad24b335fb121a2bc7f1d048ab7420569edcba5a

2016-08-04 15:57 +0000 [d526aa5cbe]  Richard Mudgett <rmudgett@digium.com>

	* sorcery.c: Minor optimizations.

	  * Remove some unused parameters from internal functions:
	  sorcery_wizard_create()
	  sorcery_wizard_update()
	  sorcery_wizard_delete()

	  * Created the struct sorcery_observer_invocation ao2 object without a lock
	  since it is not needed in sorcery_observer_invocation_alloc().

	  * Cleanup generic ao2 container sorcery object id hash, sort, and cmp
	  functions.

	  Change-Id: Iff71d75f52bc1b8cee955456838c149faaa4f92e

2016-08-01 11:04 +0000 [45e143576f]  Richard Mudgett <rmudgett@digium.com>

	* sorcery.c: Tweak some container declaration formatting.

	  * Tweak sorcery_object_type_alloc() formatting.
	  * Tweak ast_sorcery_init() formatting.

	  Change-Id: Ib02430023f15268cd7a2ea53f2c331213e4d3944

2016-08-11 23:30 +0000 [eca3d2698a]  Corey Farrell <git@cfware.com>

	* pbx.c: Additional fixes to ast_context_remove_extension_callerid2.

	  Do not check registrar of the first extension head.  We should only check
	  the registrar when we match the priority.

	  Additionally fix a couple calls to strcmp which used the input callerid
	  instead of the clean version ex.cidmatch.

	  ASTERISK-26233

	  Change-Id: I17ea6881a18f40840ae9c1f5394aab1fbb3769f1

2016-08-13 22:02 +0000 [9202ca34a8]  Matt Jordan <mjordan@digium.com>

	* app_dial: Improve documentation

	  * Add some helpful <literal> and other embedded paragraph tags

	  * Document some of the lesser known channel variables set by Dial

	  * Add examples for some common Dial uses, along with some more
	    challenging but useful options

	  Change-Id: Ib2fb9301e8e044d14fbb2815ec64161f19bbfbc1

2016-08-13 20:16 +0000 [e9fe08ea37]  Matt Jordan <mjordan@digium.com>

	* manager: Add <see-also> tags to relate interrelated events/actions together

	  Change-Id: Idbac539205aa732bf786c4f765577d8e9ff28ba4

2016-08-13 20:15 +0000 [a93cd39ac1]  Matt Jordan <mjordan@digium.com>

	* manager: Add <see-also> tags to relate Bridge related events,actions, and apps

	  Change-Id: I67e6b79fa3102e494b5fe6cc7510472249080e85

2016-08-13 20:14 +0000 [d8a7594ffd]  Matt Jordan <mjordan@digium.com>

	* manager: Add <see-also> tags to relate AoC events and actions

	  Change-Id: Iea89a36222712148c1775c05ed0ad1049d67a70e

2016-08-13 20:13 +0000 [243f0cf99a]  Matt Jordan <mjordan@digium.com>

	* manager: Add <see-also> tags to relate UserEvent actions/apps/events

	  Change-Id: I80f8a981f62f50e74609c69c49edcaca6c95efa4

2016-08-12 15:53 +0000 [3269cf4c17]  Matt Jordan <mjordan@digium.com>

	* res_agi: Improve documentation

	  * Groups of AGI commands that have similar functionality now reference
	    each other, and all reference the AGI application for ease of wiki
	    reference.

	  * The documentation for the AGI application has been improved, in
	    particular noting the various AGI types and how they are invoked.

	  * A warning message has been added to DeadAGI, noting that it is
	    deprecated.

	  Change-Id: I479ccdee8a7393f01b18692c3d4ab7e6bdd1875d

2016-08-12 13:53 +0000 [a19f4affe8]  Matt Jordan <mjordan@digium.com>

	* manager: Add <see-also> links between related events

	  This patch adds some see-also references between related AMI events. It
	  focuses primarily on those events that are guaranteed to come in pairs,
	  such as DTMFBegin/DTMFEnd, as well as those that occur during the life
	  cycle of an Asterisk channel, such as Newchannel/Hangup.

	  Change-Id: Iaab600477052018d0f8c03d0c624c0856e9ff1f3

2016-08-12 11:15 +0000 [ddab42e296]  Matt Jordan <mjordan@digium.com>

	* func_channel: Reorganize documentation

	  * Following the example of the PJSIP channel driver, the channel
	    technology specific documentation has been moved to the respective
	    channel drivers that provide that functionality. This has the benefit
	    of locating the documentation of items with those modules that provide
	    it.

	  * Examples of using the CHANNEL function for both standard items as well
	    as for PJSIP have been added.

	  * The 'max_forwards' standard item has been documented.

	  Change-Id: Ifaa79a232c8ac99cf8da6ef6cc7815d398b1b79b

2016-08-15 07:17 +0000 [922b74169f]  Joshua Colp <jcolp@digium.com>

	* manager: Clarify that dialplan manipulation actions are under system class.

	  ASTERISK-26246 #close

	  Change-Id: Id673b9786389f9d2a87f638ce1a25161f5f31657

2016-08-11 22:12 +0000 [9debe1ca26]  Corey Farrell <git@cfware.com>

	* Run mandatory cleanup when startup fails.

	  Errors during startup result in an exit.  These error branches should be
	  calling ast_run_atexit(0) to ensure mandatory cleanup is run.

	  ASTERISK-26267 #close

	  Change-Id: If226f2326ae2df7add20040696132214cf2bb680

2016-08-11 11:24 +0000 [d7534e016b]  George Joseph <gjoseph@digium.com>

	* res_pjsip_caller_id:  Copy header name to short header name

	  When compact_headers was set, we were sending a zero-length header name
	  for PAI and RPID because we always forced the short header name length
	  to 0.  We did this because we cloned the header from "From" and wanted
	  to clear "f" from the sname.  By cloning however, we bypass pjproject's
	  automatic logic that sets sname to name if there's no compact form of
	  the header, which there isn't for PAI and RPID.  So now we force sname
	  to be the same as name right after we set name.

	  res_pjsip_diversion needed the same treatment for the Diversion header.

	  ASTERISK-26241 #close

	  Change-Id: I633ec139630cd83809aae00336cee4a10077e467

2016-08-11 11:13 +0000 [225fd1003f]  Matt Jordan <mjordan@digium.com>

	* app_queue: Prevent crash when a call is forwarded to an invalid location

	  When a call forward attempt is made from a Queue member, the current
	  code will hang up the forwarding channel in an off-nominal condition
	  prior to raising the Stasis events informing the rest of Asterisk that
	  the call was forwarded. This will result in a slew of dreaded FRACKs,
	  most likely leading to a crash.

	  This patch modifies the code such that we don't hang up the forwarding
	  channel even in an off-nominal condition until we've safely raised the
	  Stasis messages.

	  ASTERISK-25797 #close

	  Change-Id: Ife5abed351691fd79105321636eaa8ea8dcdba38

2016-08-11 12:18 +0000 [aeb859dba9]  George Joseph <gjoseph@digium.com>

	* res_pjsip:  Fail global load if debug or default_from_user are empty

	  If debug was specified in the global configuration but left blank,
	  the logger would treat it as a wildcard and log all hosts.  If
	  default_from_user was empty, a crash would result.

	  The global apply handler now checks for empty strings.

	  ASTERISK-26239 #close
	  ASTERISK-26238 #close

	  Change-Id: Ie75727f5cd5808845d92cc81f5713842fb203336

2016-08-01 15:07 +0000 [2275494e80]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip res_pjsip_mwi: Misc fixes and cleanups.

	  * Eliminated RAII_VAR() usage in
	  ast_sip_persistent_endpoint_update_state().

	  * Added a missing allocation failure check to
	  persistent_endpoint_find_or_create().

	  * Made persistent_endpoint_find_or_create() create the new object without
	  a lock as it isn't needed.

	  * Cleaned up some ao2 container allocation idioms.

	  * Reordered res_pjsip_mwi.c load_module() and unload_module()

	  Change-Id: If8ce88fbd82a0c72a37a2388f74f77237a6a36a8

2016-08-04 18:03 +0000 [d4ffbccef6]  Richard Mudgett <rmudgett@digium.com>

	* location.c: Misc fixes and cleanups.

	  * Eliminated most RAII_VAR() usage.

	  * Added several missing allocation failure checks.

	  * Made ast_sip_for_each_contact() allocate the wrapper ao2 object without
	  a lock as it is not needed.

	  Change-Id: Ie20913365156c95dd79e5d471cfd25e99ae880bc

2016-08-11 12:01 +0000 [36b2a40533]  George Joseph <gjoseph@digium.com>

	* autohints:  Update CHANGES and extensions.conf.sample

	  Make it clear that we're talking about device state hints and add
	  an entry to the sample config.

	  Change-Id: Iaef58ffb960191a21b713e8e0b51ce1fcd47e433

2016-08-02 13:53 +0000 [4a5da6c9b4]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Tweak high water checks.

	  * The high water check in ast_taskprocessor_alert_set_levels() would
	  trigger immediately if the new high water level is zero and the queue was
	  empty.

	  * The high water check in taskprocessor_push() was off by one.

	  Change-Id: I687729fb4efa6a0ba38ec9c1c133c4d407bc3d5d

2016-08-03 16:24 +0000 [5ba6357be2]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Make aor named lock a mutex.

	  The named aor lock was always being locked for writes so a rwlock adds no
	  benefit and may be slower because rwlocks are biased toward read locking.

	  Change-Id: I8c5c2c780eb30ce5441832257beeb3506fd12b28

2016-07-29 17:41 +0000 [b6e03a5ff3]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_distributor.c: Add missing allocation failure check.

	  Change-Id: I932ab2cea845e534d9ff318035b6de39972d3b28

2016-08-11 10:50 +0000 [ac0454f9fa]  David M. Lee <dlee@respoke.io>

	* Fixed compile flags for non-module libs

	  The non-module libs libasteriskssl.dylib and libasteriskpj.dylib have
	  long been missing the AST_NOT_MODULE compile flag. This was mostly
	  okay, until a recent fix to improve compiler warnings when the
	  AST_MODULE_SELF_SYM is missing broke the build on OS X/macOS/whatever
	  they are calling it these days.

	  Change-Id: I2cb51c890824f001280a5114f2e775f97c163516

2016-08-11 10:50 +0000 [b3c2f1164b]  Kevin Harwell <kharwell@digium.com>

	* alembic: add auth_username to endpoint's identify_by enum

	  A new identify_by option was added recently, auth_username. However, this
	  setting was not added as an allowable choice in the database enumeration
	  value.

	  This patch updates the current enumeration, adding in the new setting.

	  ASTERISK-26268 #close

	  Change-Id: Ib4788e8485e4cd40172ec0abbf5810a147ab8bf8

2016-08-08 14:50 +0000 [41aba83ff6]  Richard Mudgett <rmudgett@digium.com>

	* res_srtp: Move SDP SRTP code from the core to res_srtp.

	  A patch made to the master branch (Now the 14 branch) inadvertently made
	  libsrtp a required dependency in order to compile Asterisk.  Rather than
	  create dummy defines to substitute for the defines supplied by libsrtp
	  when libsrtp is not available, most of the code in sdp_srtp.c is moved
	  into res_srtp.c.  This gets more code out of Asterisk's core that isn't
	  used when SRTP is not available.  This also makes another inadvertent
	  required dependency on libsrtp by Asterisk's core unlikely.

	  ASTERISK-26253 #close
	  Reported by: Ben Merrills

	  Change-Id: I0a46cde81501c0405399c2588633ae32706d1ee7

2016-08-06 10:57 +0000 [820879415f]  Alexei Gradinari <alex2grad@gmail.com>

	* pjsip: Fix deadlock with suspend taskprocessor on masquerade

	  If both channels which should be masqueraded
	  are in the same serializer:
	  1st channel will be locked waiting condition 'complete'
	  2nd channel will be locked waiting condition 'suspended'

	  On heavy load system a chance that both channels will be in
	  the same serializer 'pjsip/distibutor' is very high.

	  To reproduce compile res_pjsip/pjsip_distributor.c with
	  DISTRIBUTOR_POOL_SIZE=1

	  Steps to reproduce:
	  1. Party A calls Party B (bridged call 'AB')
	  2. Party B places Party A on hold
	  3. Party B calls Voicemail app (non-bridged call 'BV')
	  4. Party B attended transfers Party A to voicemail using REFER.
	  5. When asterisk masquerades calls 'AB' and 'BV',
	     a deadlock is happened.

	  This patch adds a suspension indicator to the taskprocessor.
	  When a session suspends/unsuspends the serializer
	  it sets the indicator to the appropriate state.
	  The session checks the suspension indicator before
	  suspend the serializer.

	  ASTERISK-26145 #close

	  Change-Id: Iaaebee60013a58c942ba47b1b4930a63e686663b

2016-08-09 12:07 +0000 [d4170df40a]  Kevin Harwell <kharwell@digium.com>

	* alembic/sqlalchemy: auto increment only allowed on a single column

	  The extensions table defined two columns (id and priority) as primary key
	  autoincrement columns. However only one is allowed when defining the primary
	  key.

	  This patch removes the autoincrement attribute from the priority column since
	  it does not need to be as such and really should not have been on there in the
	  first place.

	  This patch also removes 'context', 'exten', and 'priority' from the primary key
	  index and creates a new combined unique contraint index on them.

	  ASTERISK-26183 #close

	  Change-Id: Ib9c712c612a4d7ec1edb0dcb77f1bae0905a470b

2016-08-10 11:47 +0000 [8d42ff784d]  George Joseph <gjoseph@digium.com>

	* res_resolver_unbound:  Allow compilation with libunbound version < 1.5

	  libunbound at version 1.4.20 (which CentOS still uses) declared all
	  of their string function parameters as as 'char *'.  1.4.21 changed
	  them all to 'const char *'.  Thankfully 1.4.21 also introduced the
	  UNBOUND_VERSION_MAJOR define so configure now checks for that and
	  sets HAVE_UNBOUND_CONST_PARAMS.  res_resolver_unbound then checks
	  that and casts away the 'const' if it's not set.

	  Tested compile and testsuite on CentOS6 (1.4.20), Ubuntu14 (1.4.22) and
	  Fedora24 (1.5.4).  There are a few failing tests to be addressed though.

	  ASTERISK-26283 #close

	  Change-Id: Ib708b19b706c5d0ba7b7d5473e6df339d9ae4148

2016-08-07 09:58 +0000 [c315460abb]  Matt Jordan <mjordan@digium.com>

	* channels/chan_pjsip: Add PJSIP_SEND_SESSION_REFRESH

	  This patch adds a new PJSIP specific dialplan function,
	  PJSIP_SEND_SESSION_REFRESH. When invoked on a PJSIP channel, the media
	  session will be refreshed via either an UPDATE or re-INVITE request.
	  When used in conjunction with the PJSIP_MEDIA_OFFER dialplan function,
	  the formats in use on a PJSIP channel can be re-negotiated and changed
	  dynamically after call setup.

	  ASTERISK-26277 #close

	  Change-Id: Ib98fe09ba889aafe26d58d32f0fd1323f8fd9b1b
	  (cherry picked from commit eec60dd77394f0519895fc6abce3a6f90f6470f1)

2016-08-09 16:19 +0000 [8fe9f1f7f1]  Mark Michelson <mmichelson@digium.com>

	* res_rtp_asterisk: Cache local RTCP address.

	  When an RTCP packet is sent or received, res_rtp_asterisk generates a
	  Stasis event that contains the RTCP report as well as the local and
	  remote addresses that the report pertains to.

	  The addresses are determined using ast_find_ourip(). For the local
	  address, this will typically result in a lookup of the hostname of the
	  server, and then a DNS lookup of that hostname. If you do not have the
	  host in /etc/hosts, then this results in a full DNS lookup, which can
	  potentially block for some time.

	  This is especially problematic when performing RTCP reads, since those
	  are done on the same thread responsible for reading and writing media.

	  This patch addresses the issue by performing a lookup of the local
	  address when RTCP is allocated. We then use this cached local address
	  for the Stasis events when necessary.

	  ASTERISK-26280 #close
	  Reported by Mark Michelson

	  Change-Id: I3dd61882c2e57036f09f0c390cf38f7c87e9b556

2016-08-08 19:14 +0000 [827457dca0]  Corey Farrell <git@cfware.com>

	* Produce friendly error when AST_MODULE_SELF_SYM is not defined.

	  Modules must define AST_MODULE_SELF_SYM to be used as the name of a
	  generated function.  This produces a friendly error when it's not
	  defined.

	  ASTERISK-26278 #close

	  Change-Id: Ib9d35a08104529c516d636771365e02c6e77a45b

2016-08-08 12:53 +0000 [403b63571c]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_mwi: fix unsolicited mwi blocks PJSIP stack

	  The PJSIP taskprocessors could be overflowed on startup
	  if there are many (thousands) realtime endpoints
	  configured with unsolicited mwi.
	  The PJSIP stack could be totally unresponsive for a few minutes
	  after boot completed.

	  This patch creates a separate PJSIP serializers pool for mwi
	  and makes unsolicited mwi use serializers from this pool.
	  This patch also adds 2 new global options to tune taskprocessor
	  alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'.

	  This patch also adds new global option 'mwi_disable_initial_unsolicited'
	  to disable sending unsolicited mwi to all endpoints on startup.
	  If disabled then unsolicited mwi will start processing
	  on next endpoint's contact update.

	  ASTERISK-26230 #close

	  Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a

2016-08-06 01:37 +0000 [0749f6e6f3]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* res_odbc: Show only when there a fail attempt of connection in CLI

	  When is executed CLI command "odbc show all" every time is show
	  information about variable last_negative_connect. If not there  a fail
	  attempt of connection will show date like "1969-12-31 21:00:00".

	  This patch fix there situation for to show only this information when
	  exists a fail attempt before.

	  Change-Id: I7c058b0be6f7642e922de75ee6b82c7276c9f113

2016-08-05 22:06 +0000 [b156a291af]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* cdr_adaptive_odbc: Fix DNSs mixed config quote quoted_identifiers

	  When haved more than once DNSs config and one of their dont set
	  quoted_identifiers and before this is with configurated with
	  quoted_identifiers resulting a truncate statement for a reference null
	  for quote character identifier.

	  This patch initializes quoted flag before build SQL Query

	  Example config for this bugfix case in cdr_adaptive_odbc.conf file

	  	[first]
	  	connection=asterisk-server1
	  	table=cdr
	  	quoted_identifiers="

	  	[second]
	  	connection=asterisk-server2
	  	table=cdr

	  	[third]
	  	connection=asterisk-server3
	  	table=cdr
	  	quoted_identifiers=`

	  Change-Id: Ibd95667b468e10d4a19a2b9d88b9934ec7207e1d

2016-08-05 15:34 +0000 [9042ad40f2]  Alexei Gradinari <alex2grad@gmail.com>

	* app_voicemail: Add taskprocessor alert level options.

	  On heavy loaded system with IMAP or DB storage,
	  'app_voicemail' taskprocessor queue could reach 500 scheduled tasks.
	  It could happen when the IMAP or DB server dies or is unreachable.
	  It could happen on startup when there are many (thousands)
	  realtime endpoints configured with unsolicited mwi.
	  If the taskprocessor queue reaches the high water level
	  then the alert is triggered and pjsip stops processing new requests
	  until the queue reaches the low water level to clear the alert.

	  This patch adds 2 new 'general' configuration options
	  to tune taskprocessor alert levels:
	  'tps_queue_high' - Taskprocessor high water alert trigger level.
	  'tps_queue_low' - Taskprocessor low water clear alert level

	  ASTERISK-26229 #close

	  Change-Id: I766294fbffedf64053c0d9ac0bedd3109f043ee8

2016-08-04 10:16 +0000 [54869e4823]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_outbound_publish: Use a serializer shutdown group for unload.

	  This change replaces the custom unload process for the outbound
	  publish module with the common serializer shutdown group.

	  ASTERISK-25217 #close

	  Change-Id: I280a0384d860c486202d87d2d674394cca77ffb6

2016-08-04 10:27 +0000 [e711e57106]  Kevin Harwell <kharwell@digium.com>

	* resource_channels: Sync with ARI stubs

	  This file was out of sync with the current ARI definitions.

	  Change-Id: Ie7cb7d6d3c2eeb9cc9d683ca87b43b117e713d0a

2016-08-03 15:41 +0000 [29b0f733a0]  Corey Farrell <git@cfware.com>

	* Add missing checks during startup.

	  This ensures startup is canceled due to allocation failures from the
	  following initializations.
	  * channel.c: ast_channels_init
	  * config_options.c: aco_init

	  ASTERISK-26265 #close

	  Change-Id: I911ed08fa2a3be35de55903e0225957bcdbe9611

2016-08-03 09:47 +0000 [90b30b21ac]  Joshua Colp <jcolp@digium.com>

	* astconfigparser: Really handle case where line is simply a comment.

	  The regular expression would match causing the code that handled
	  the line if it was merely a comment to never get executed.

	  Change-Id: I3e4022481037ebcba9905587fe8c764b4ce21819

2016-08-01 11:08 +0000 [73bce50ef8]  Joshua Colp <jcolp@digium.com>

	* sorcery: Use more compatible regex for local expressions.

	  This changes the use of an empty regex for both res_sorcery_config
	  and res_sorcery_memory to "." instead. This is a more compatible
	  regular expression which also works on FreeBSD.

	  ASTERISK-26206 #close

	  Change-Id: Ia9166dd176f1597555ba22b6931180d0626c1388

2016-08-02 03:08 +0000 [3ff964c6b6]  Alexander Traud <pabstraud@compuserve.com>

	* res_pjsip: SIP/SDP origin (o=) contained square brackets on IP6 transports.

	  ASTERISK-26256 #close

	  Change-Id: I3fd68df561f81fdb8c6c497d465b50c12422f058

2016-08-01 16:13 +0000 [f6276441b1]  George Joseph <gjoseph@digium.com>

	* menuselect:  Add an opaque "member_data" string to the acceptable xml

	  Change-Id: Id5ac43b95c8d7395f3be37f983632169db3d1afe

2016-07-29 13:13 +0000 [1cd79d6ee5]  Mark Michelson <mmichelson@digium.com>

	* Remove SILK payload mappings from Asterisk core.

	  SILK is a bit of a hog when it comes to using up our limited number of
	  dynamic payload types in the RTP engine. By freeing up four slots, it
	  allows for other codecs to potentially take the place.

	  Now, codec_silk.so will dynamically use the payload slots in the RTP
	  engine when it loads.

	  A better fix would be make RTP dynamic payload types actually
	  dynamic. However, at this stage of Asterisk 14 development, this is a
	  risky move that would be imprudent.

	  Change-Id: I5774e09408f9a203db189529eabdc0d3f4c1e612

2016-07-29 04:48 +0000 [a7ae48441f]  Joshua Colp <jcolp@digium.com>

	* astconfigparser: Handle case where line is simply a comment.

	  Change-Id: I2dea5815363f4d787d709228a04f33baee383ef5

2016-07-28 14:10 +0000 [89a0a1eb45]  Corey Farrell <git@cfware.com>

	* pbx.c: Fix handling of '-' in extension name and callerid

	  This adds a two strings to ast_exten.  name to go with exten and
	  cidmatch_display to go with cidmatch.  The new fields contain input used
	  to add the extension in the first place.  The existing fields now
	  contain stripped input that excludes insignificant spaces and dashes.
	  These stripped fields should always be used for comparisons.  The
	  unstripped fields should normally be used for display, but displaying
	  stripped values will not cause runtime errors.

	  Note the actual string is only stored twice if it contains dashes.  If
	  no dashes are found then both 'char *' fields point to the same memory.
	  So this change has a minimum effect on memory usage.

	  The existing functions ast_get_extension_name and
	  ast_get_extension_cidmatch return unstripped values as they did before
	  this change.  Other similar bugs likely still exist where unstripped
	  extensions are saved outside pbx.c then passed back in.

	  ASTERISK-26233 #close

	  Change-Id: I6cd61ce57acc1570ca6cc14960c4c3b0a9eb837f

2016-07-27 17:17 +0000 [68ebf86e2f]  Richard Mudgett <rmudgett@digium.com>

	* pbx.c: Allow dangerous functions when adding a hint to dialplan.

	  We can allow dangerous functions when adding a hint since altering
	  dialplan is itself a privileged activity.  Otherwise, we could never
	  execute dangerous functions.

	  ASTERISK-25996 #close
	  Reported by: Andrew Nagy

	  Change-Id: I4929ff100ad1200a0198262d069a34f2296e77ba

2016-07-21 10:36 +0000 [b5bc2fdda8]  Alexei Gradinari <alex2grad@gmail.com>

	* pjproject: fixed a few bugs

	  This patch fixes the issue in pjsip_tx_data_dec_ref()
	  when tx_data_destroy can be called more than once,
	  and checks if invalid value (e.g. NULL) is passed to.

	  This patch updates array limit checks and docs
	  in pjsip_evsub_register_pkg() and pjsip_endpt_add_capability().

	  Change-Id: I4c7a132b9664afaecbd6bf5ea4c951e43e273e40

2016-07-17 18:28 +0000 [b4f1c6380e]  George Joseph <gjoseph@digium.com>

	* pjproject_bundled:  Update for pjproject 2.5.5

	  Add more --disable-* switches to Makefile.rules including
	  --disable-opus which was causing bundled pjproject to fail with
	  "undefined reference" errors in libasteriskpj.

	  Changed PJ_ENABLE_EXTRA_CHECK to 1.

	  Removed 2 obsolete patches and added a new one.
	  The new one was merged by Teluu on 6/27/2016.

	  ASTERISK-26148 #close

	  Change-Id: Ib8af6c6a9d31f7238ce65b336134c2efdc855063

2016-07-27 10:33 +0000 [feb1a43412]  David M. Lee <dlee@respoke.io>

	* Portably sscanf tv_usec

	  In a timeval, tv_usec is defined as a suseconds_t, which could be
	  different underlying types on different platforms. Instead of trying to
	  scanf directly into the timeval, scanf into a long int, then copy that
	  into the timeval.

	  Change-Id: I29f22d049d3f7746b6c0cc23fbf4293bdaa5eb95

2016-07-27 12:36 +0000 [1d364ac54f]  Kevin Harwell <kharwell@digium.com>

	* rtp_engine: Failed assertion and wrong name given for codec

	  Fixed an assert check that would trigger when the passed in value was negative.
	  The negative value was being cast to an unsigned value. This resulted in the
	  check failing.

	  Also fixed another problem when loading formats in the engine. When setting the
	  mime type the format's name was being passed in instead of the codec's name.

	  Change-Id: I1a201cd419ba4d8e9a40d337e36b6fbe1737192c

2016-07-27 09:56 +0000 [8802e55c26]  David M. Lee <dlee@respoke.io>

	* Replace strdupa with more portable ast_strdupa

	  The strdupa function is a GNU extension, and not widely portable. We
	  have an ast_strdupa function used within Asterisk which is preferred.
	  I pulled the definition up from menuselect.c into the menuselect.h
	  header file so it can be shared across menuselect.

	  Change-Id: I9593c97f78386b47dc1e83201e80cb2f62b36c2e

2016-07-21 22:44 +0000 [737471f131]  Richard Mudgett <rmudgett@digium.com>

	* dsp.c: Add fax and DTMF detection unit tests.

	  * Add fax amplitude and frequency sweep tests.
	  * Add DTMF amplitude and twist unit tests.

	  Change-Id: I8d77c9a1eec89e440d715f998c928687e870c3f7

2016-07-21 11:56 +0000 [a8cd5d255a]  Richard Mudgett <rmudgett@digium.com>

	* dsp.c: Added descriptive comments to Goertzel calculations.

	  * Added doxygen to describe some struct members and what is going on in
	  the code.

	  Change-Id: I2ec706a33b52aee42b16dcc356c2bd916a45190d

2016-07-13 13:48 +0000 [6dfb34cf13]  Richard Mudgett <rmudgett@digium.com>

	* dsp.c: Fix incorrect format reference typo.

	  Change-Id: Ia131da3ec29acf385cb43a586a29ecc975eb3896

2016-07-25 21:18 +0000 [327136088e]  Richard Mudgett <rmudgett@digium.com>

	* dsp.c: Correct DTMF twist dsp.conf documentation.

	  Change-Id: Idf97e3a72f1edc5fca58f2fa7b20785922be0cae

2016-07-22 04:43 +0000 [1e7168aee0]  Joshua Colp <jcolp@digium.com>

	* astconfigparser.py: Update with realtime fixes.

	  When configuring SIP URIs in the pjsip.conf file it is
	  necessary to escape the semicolon so the parser does not
	  treat it as a comment. This change allows this to work in
	  the astconfigparser implementation.

	  A secondary bug where some data was lost if a configuration
	  option included a "=" in its value was also fixed.

	  A bug where sections would be considered equal despite
	  being different has also been fixed.

	  Change-Id: If229f656ef22050b50e7b34e90c4bffe796431f8

2016-07-21 22:28 +0000 [49461f37b7]  Richard Mudgett <rmudgett@digium.com>

	* dsp.c: Fix erroneous fax tone detection.

	  The Goertzel calculations get less accurate the lower the signal level
	  being worked with becomes because there is less resolution remaining.
	  If it is too low we can erroneously detect a tone where none really
	  exists.  The searched for fax frequencies not only need to be so much
	  stronger than the background noise they must also be a minimum strength.

	  * Add needed minimum threshold test to tone_detect().

	  * Set TONE_THRESHOLD to allow low volume frequency spread detection.

	  ASTERISK-26237 #close
	  Reported by: Richard Mudgett

	  Change-Id: I84dbba7f7628fa13720add6a88eae3b129e066fc

2016-07-24 18:27 +0000 [b4c5dcad01]  George Joseph <gjoseph@digium.com>

	* menuselect:  Various menuselect enhancements

	  * Add 'external' as a support level.
	  * Add ability for module directories to add entries to the menu
	    by adding members to the <module_prefix>/<module_prefix>.xml file.
	  * Expand the description field to 3 lines in the ncurses implementation.
	  * Allow the description field to wrap in the newt implementation.
	  * Add description field to the gtk implementation.

	  Change-Id: I7f9600a1984a42ce0696db574c1051bc9ad7c808

2016-07-24 16:51 +0000 [9db420c69d]  Joshua Colp <jcolp@digium.com>

	* ari: Update version.

	  New functionality has been added so the version has been
	  bumped to one over the 13 version.

	  Change-Id: I5d30077f62640c0ac83599b4e9a9b657bf184f69

2016-07-23 08:51 +0000 [8852a4c3db]  George Joseph <gjoseph@digium.com>

	* asterisk.c:  Add auto generation and persistence of UUID

	  Upcoming features will require the generation and persistence
	  of a UUID.

	  Change-Id: I3ec0062427e133217db6ef496a4216f427c3b92d

2016-07-22 14:44 +0000 [76781a0964]  Mark Michelson <mmichelson@digium.com>

	* Fix sqlalchemy error regarding identifier length.

	  sqlalchemy was complaining:

	  sqlalchemy.exc.IdentifierError: Identifier
	  'ps_contacts_qualifyfreq_exptime' exceeds maximum length of 30
	  characters

	  This fixes the problem by changing the index name to be
	  "ps_contacts_qualifyfreq_exp" instead.

	  ASTERISK-26227 #close
	  Reported by Mark Michelson

	  Change-Id: I0ed784f87504be2a59ee8d3242ef6f625d5ed1a9

2016-07-19 06:16 +0000 [9be69c1636]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Enable Session-Timers for SIP over TCP (and TLS).

	  Asterisk defaults to timers=accept/refresher=uas. In that scenario, only in that
	  scenario, Sessions-Timers (RFC 4028) had no effect via TCP. This change enables
	  Session-Timers for SIP over TCP (and for SIP over TLS).

	  However with longer international calls via TCP, the SIP channel might break,
	  because all hops on the Internet route must stay online (have not a single power
	  outage, for example). Therefore with Session-Timers enabled (which are enabled
	  at default), you might see dropped calls. Consequently even with this change,
	  you might be better-off going for session-timers=refuse in your sip.conf.

	  ASTERISK-19968 #close

	  Change-Id: I1cd33453c77c56c8e1394cd60a6f17bb61c1d957

2016-07-19 13:39 +0000 [8fb807009f]  Alexander Traud <pabstraud@compuserve.com>

	* codecs: Add iLBC 20.

	  Asterisk already supported iLBC 30. This change adds iLBC 20. Now, Asterisk
	  defaults to iLBC 20 but falls back to iLBC 30, when the remote party requests
	  this.

	  ASTERISK-26218 #close
	  ASTERISK-26221 #close
	  Reported by: Aaron Meriwether

	  Change-Id: I07f523a3aa1338bb5217a1bf69c1eeb92adedffa

2016-07-15 16:16 +0000 [4286a369a1]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Whitespace and comment cleanup.

	  Change-Id: I11139a4a95df34e223ba622aa6227e33ab8f6c38

2016-07-21 22:34 +0000 [68de3a9e51]  Corey Farrell <git@cfware.com>

	* pbx.c: Remove duplicate code.

	  Merge code found in both branches of a conditional in
	  ast_add_extension2_lockopt.

	  The updated code initializes peer_table and peer_label_table of the
	  extension before linking it to the context.

	  Change-Id: Ic759e27cdc9906c6877df41d28ee9c5be8f41c20

2016-07-21 16:35 +0000 [15bf6a87dc]  George Joseph <gjoseph@digium.com>

	* Create Asterisk-14:  Update CHANGES and UPGRADE files

	  Change-Id: I35b5f6657670cfa8985796fa1e1fe86ad299efdc

2016-07-21 09:05 +0000 [1b4922466b]  George Joseph <gjoseph@digium.com>

	* chan_sip: Prevent deadlock when issuing "sip show channels"

	  sip_show_channels locks the dialogs container first then locks each
	  sip_pvt so it can spit out the details.  The rest of sip dialog
	  processing locks the sip_pvt first then locks the dialogs container
	  if it needs to.  Both lock in the order they need but deadlocks can
	  result.  To fix, sip_show_channels and sip_show_channelstats have
	  been converted to use an iterator rather than ao2_callback.  This way
	  the container is locked only while getting the next entry and is
	  unlocked when the callback is called.

	  ASTERISK-23013 #close

	  Change-Id: Id9980419909e811f89484950ed46ef117b9eb990

2016-07-15 19:28 +0000 [a36a174c4b]  Corey Farrell <git@cfware.com>

	* pbx: Create pbx_sw.c for management of 'struct ast_sw'.

	  This changes context switches from a linked list to a vector, makes
	  'struct ast_sw' opaque to pbx.c.

	  Although ast_walk_context_switches is maintained the procedure is no
	  longer efficient except for the first call (inc==NULL).  This
	  functionality is replaced by two new functions implemented by vector
	  macros.
	  * ast_context_switches_count (AST_VECTOR_SIZE)
	  * ast_context_switches_get (AST_VECTOR_GET)

	  As with ast_walk_context_switches callers of these functions are
	  expected to have locked contexts.  Only a few places in Asterisk walked
	  the switches, they have been converted to use the new functions.

	  Change-Id: I08deb016df22eee8288eb03de62593e45a1f0998

2016-07-21 10:28 +0000 [81ea024d93]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_pubsub: fixed a bug when pjsip_tx_data_dec_ref is called twice.

	  This patch removed call of pjsip_tx_data_dec_ref in send_notify
	  if send_request failed.
	  The pjsip_dlg_send_request deletes the message on error by itself.

	  It seems this patch fixes next issues:
	  ASTERISK-26199
	  ASTERISK-26166
	  ASTERISK-26174

	  Change-Id: I8b05917c93d993f95d604c042ace5f1a5500f59a

2016-07-13 05:24 +0000 [1d2173c7ae]  Alexander Traud <pabstraud@compuserve.com>

	* res_srtp: Enable AES-256 and AES-GCM.

	  ASTERISK-26190 #close

	  Change-Id: I11326d80edd656524a51a19450e586c583aa0a0b

2016-07-18 22:46 +0000 [8f6e9ffcc6]  Corey Farrell <git@cfware.com>

	* Add conditional support for noreturn functions.

	  This adds support for tagging functions with the noreturn attribute.
	  If DO_CRASH is enabled then ast_do_crash never returns.  If AST_DEVMODE
	  and DO_CRASH are enabled then failed assertions never return.  This can
	  resolve a large number of false positives with static analyzers.

	  ASTERISK-26220 #close

	  Change-Id: Icfb61e5fe54574eced4c3e88b317244f467ec753

2016-07-19 13:18 +0000 [3d62f317dd]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi.c: Fix deadlock potential in fax redirection.

	  The dahdi_handle_dtmf() and my_handle_dtmf() have the potential to
	  deadlock if an incoming fax happens during the Playback or similar
	  application.

	  * Fixed the potential deadlock by not calling ast_async_goto() with the
	  channel lock held.

	  ASTERISK-26216 #close
	  Reported by: Richard Mudgett

	  Change-Id: I9144b84ade5f96690996624ec8a2d40c56af40aa

2016-07-13 18:49 +0000 [db4979fa79]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix deadlock potential in fax redirection.

	  The sip_read() has the potential to deadlock if an incoming fax happens
	  during the Playback or similar application.

	  * Fixed the potential deadlock by not calling ast_async_goto() with the
	  channel lock held.

	  * Made always eat the fax detection frame whether there is a fax extension
	  or not.

	  ASTERISK-26216
	  Reported by: Richard Mudgett

	  Change-Id: I6d3f5cccd4b77c3aa6ffc1a54c0f6bde61c9278e

2016-07-13 18:48 +0000 [3db468ea9e]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip.c: Fix deadlock potential in fax redirection.

	  The chan_pjsip_cng_tone_detected() has the potential to deadlock if an
	  incoming fax happens during the Playback or similar application.

	  * Fixed the potential deadlock by not calling ast_async_goto() with the
	  channel lock held.

	  * Made always eat the fax detection frame whether there is a fax extension
	  or not.

	  ASTERISK-26216
	  Reported by: Richard Mudgett

	  Change-Id: I32aecbb4818af646dc5a619f0dc040e9b1f222e5

2016-07-12 17:33 +0000 [9abbea162c]  Richard Mudgett <rmudgett@digium.com>

	* res_fax.c: Fix deadlock potential in FAXOPT(faxdetect) framehook.

	  The fax_detect_framehook() has the potential to deadlock if an incoming
	  fax happens during the Playback or similar application.

	  * Fixed the potential deadlock by not calling ast_async_goto() with the
	  channel lock held.

	  * Made always eat the fax detection frame whether there is a fax extension
	  or not.

	  * Made only detach the framehook if we detected a fax and not on other
	  possible frames.

	  ASTERISK-26216
	  Reported by: Richard Mudgett

	  Change-Id: I99da35c26d1cd802626ffb4c1b4eb5b015581b6d

2016-07-12 17:24 +0000 [804fbd9c2b]  Richard Mudgett <rmudgett@digium.com>

	* res_fax: Fix FAXOPT(faxdetect) timeout option.

	  The fax detection timeout option did not work because basically the wrong
	  variable was checked in fax_detect_framehook().  As a result, the timer
	  would timeout immediately and disable fax detection.

	  * Fixed ignoring negative timeout values.  We'd complain and then go right
	  on using the negative value.

	  * Fixed destroy_faxdetect() in the off-nominal case of an incomplete
	  object creation.

	  * Added more range checking to FAXOPT(gateway) timeout parameter.

	  ASTERISK-26214 #close
	  Reported by: Richard Mudgett

	  Change-Id: Idc5e698dfe33572de9840bc68cd9fc043cbad976

2016-07-18 16:16 +0000 [0d1744e132]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi: Add faxdetect_timeout option.

	  The new option allows the channel driver's faxdetect option to timeout on
	  a call after the specified number of seconds into a call.  The new feature
	  is disabled if the timeout is set to zero.  The option is disabled by
	  default.

	  * Don't clear dsp_features after passing them to the dsp code in
	  my_pri_ss7_open_media().  We should still remember them especially for the
	  new faxdetect_timeout option.

	  ASTERISK-26214
	  Reported by: Richard Mudgett

	  Change-Id: Ieffd3fe788788d56282844774365546dce8ac810

2016-07-15 20:44 +0000 [e739888d99]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Add fax_detect_timeout endpoint option.

	  The new endpoint option allows the PJSIP channel driver's fax_detect
	  endpoint option to timeout on a call after the specified number of
	  seconds into a call.  The new feature is disabled if the timeout is set
	  to zero.  The option is disabled by default.

	  ASTERISK-26214
	  Reported by: Richard Mudgett

	  Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d

2016-07-17 07:43 +0000 [d56fc3b36b]  Alexander Traud <pabstraud@compuserve.com>

	* translate: Enables native Packet-Loss Concealment (PLC) for supporting codecs.

	  ASTERISK-25629 #close

	  Change-Id: I66c0086e6c17764b8141ec60a3e2aaefe088eb78

2016-09-19 14:18 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 14.0.0-rc1 Released.

2016-09-19 09:17 +0000 [a23b33576f]  Joshua Colp <jcolp@digium.com>

	* Release summaries: Add summaries for 14.0.0-rc1

2016-09-19 09:17 +0000 [e11354b864]  Joshua Colp <jcolp@digium.com>

	* Release summaries: Remove previous versions

2016-09-19 09:17 +0000 [24fac2271a]  Joshua Colp <jcolp@digium.com>

	* .version: Update for 14.0.0-rc1

2016-09-19 09:17 +0000 [52c101d441]  Joshua Colp <jcolp@digium.com>

	* .lastclean: Update for 14.0.0-rc1

2016-09-19 09:17 +0000 [edae56dc65]  Joshua Colp <jcolp@digium.com>

	* realtime: Add database scripts for 14.0.0-rc1

2016-09-14 09:51 +0000 [205e2ea351]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_transport_management: Convert time in log message to seconds.

	  ASTERISK-26375 #close

	  Change-Id: I46496af5cae41413e76d44d2068a7431279f09dc

2016-09-13 06:08 +0000 [bc085bba24]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Don't assume a request will have any addresses.

	  When performing DNS resolution the failover code present in
	  res_pjsip currently assumes that a request will always have
	  at least one viable address. In practice this is not true.
	  A domain may be used that has no records.

	  The code now checks that at least one address exists on the
	  request which prevents looping.

	  ASTERISK-26364 #close

	  Change-Id: Ic0761b0264864acd85915c94d878a81624940f4c

2016-09-09 05:39 +0000 [9a800b24ac]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Only invoke unidentified endpoint logic when unidentified.

	  The code was incorrectly invoking the unidentified logic when
	  an endpoint had actually been identified, causing log messages
	  to be output.

	  ASTERISK-26349 #close

	  Change-Id: Id8104fc9e3d138d5e8b6f6977ecc08765fd17d4f

2016-08-16 15:34 +0000 [137aa2f13c]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Do not crash on ACKs from unknown endpoints.

	  The endpoint identification PJSIP module is intended to identify which
	  endpoint an incoming request is from. If an endpoint is not identified,
	  then an artificial endpoint is used in its place when proceeding.

	  The problem is that the ACK request type is an exception to the rule.
	  The artificial endpoint is not used when processing an ACK. This results
	  in the possibility of having a NULL endpoint being used further on.

	  The reason ACK is an exception is an attempt not to spam security logs
	  with unidentified requests. Presumably, you've already logged the
	  unidentified request on the preceeding INVITE.

	  Up until Asterisk 13.10, retrieving a NULL endpoint in this fashion
	  didn't cause an issue. A new change in 13.10 added endpoint ACL checking
	  shortly after endpoint identification. Because we are accessing a NULL
	  endpoint, this ACL check resulted in a crash.

	  The fix here is to be sure to retrieve the artificial endpoint for all
	  request types. ACKs still do not generate unidentified request security
	  events.

	  ASTERISK-26264 #close
	  Reported by nappsoft

	  AST-2016-006

	  Change-Id: Ie0c795ae2d72273decb972dd74b6a1489fb6b703

2016-08-23 06:35 +0000 [f877e62cc9]  Corey Farrell <git@cfware.com> (license 5909)

	* chan_sip: Don't allocate new RTP instances on top of old ones.

	  In some scenarios dialog_initialize_rtp can be called multiple times on
	  the same dialog.  This can cause RTP instances to be leaked along with
	  multiple file descriptors for each instance.

	  This change makes it so the existing RTP instances are destroyed and
	  not overwritten, stopping the memory leak.

	  ASTERISK-26272 #close
	  patches:
	    ASTERISK-26272-13.patch submitted by Corey Farrell (license 5909)

	  Change-Id: Id529de1184c68f2f4d254ab41a1f458dafdb5f73

2016-09-06 15:25 +0000 [b17ee86148]  Matt Jordan <mjordan@digium.com>

	* res/res_stasis_playback: Cancel the entire playlist when a stop occurs

	  Prior to this patch, a stop issued by a delete of a Playback resource
	  (indicated by the control frame AST_CONTROL_STREAM_STOP) would only stop
	  the current media URI playing. Subsequent URIs specified by a playback
	  operation would then proceed on, even though we had just indicated to
	  the User that the Playback was finished *and* after they had just
	  'deleted' the resource. Whoops.

	  This patch corrects it by bailing out of the sequence of URIs to play if
	  one of them is terminated with an AST_CONTROL_STREAM_STOP indication.

	  ASTERISK-26341 #close

	  Change-Id: I2da9ec43545ba46cdfffe287c7e4907eae7fca42

2016-08-29 12:30 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 14.0.0-beta2 Released.

2016-08-29 07:29 +0000 [9cdf44668d]  Joshua Colp <jcolp@digium.com>

	* Release summaries: Add summaries for 14.0.0-beta2

2016-08-29 07:29 +0000 [73d39f2029]  Joshua Colp <jcolp@digium.com>

	* Release summaries: Remove previous versions

2016-08-29 07:29 +0000 [e8a97775ee]  Joshua Colp <jcolp@digium.com>

	* .version: Update for 14.0.0-beta2

2016-08-29 07:29 +0000 [345409825a]  Joshua Colp <jcolp@digium.com>

	* .lastclean: Update for 14.0.0-beta2

2016-08-29 07:29 +0000 [105c1168f7]  Joshua Colp <jcolp@digium.com>

	* realtime: Add database scripts for 14.0.0-beta2

2016-08-29 06:31 +0000 [8927b52634]  Joshua Colp <jcolp@digium.com>

	* alembic: Fix downgrade path.

	  The 3772f8f828da version was referencing a previous version
	  that did not exist in the 14.0 branch. It has been fixed to
	  reference the correct previous version.

	  Change-Id: I004d0fcfdfe1d1bb6f01c6dac2b69f6b1f40ae51

2016-08-11 12:18 +0000 [9a95c6dea3]  gtjoseph <gjoseph@digium.com>

	* res_pjsip:  Fail global load if debug or default_from_user are empty

	  If debug was specified in the global configuration but left blank,
	  the logger would treat it as a wildcard and log all hosts.  If
	  default_from_user was empty, a crash would result.

	  The global apply handler now checks for empty strings.

	  ASTERISK-26239 #close
	  ASTERISK-26238 #close

	  Change-Id: Ie75727f5cd5808845d92cc81f5713842fb203336

2016-08-11 11:24 +0000 [aaee8160bc]  gtjoseph <gjoseph@digium.com>

	* res_pjsip_caller_id:  Copy header name to short header name

	  When compact_headers was set, we were sending a zero-length header name
	  for PAI and RPID because we always forced the short header name length
	  to 0.  We did this because we cloned the header from "From" and wanted
	  to clear "f" from the sname.  By cloning however, we bypass pjproject's
	  automatic logic that sets sname to name if there's no compact form of
	  the header, which there isn't for PAI and RPID.  So now we force sname
	  to be the same as name right after we set name.

	  res_pjsip_diversion needed the same treatment for the Diversion header.

	  ASTERISK-26241 #close

	  Change-Id: I633ec139630cd83809aae00336cee4a10077e467

2016-08-11 12:01 +0000 [7af0eac02a]  gtjoseph <gjoseph@digium.com>

	* autohints:  Update CHANGES and extensions.conf.sample

	  Make it clear that we're talking about device state hints and add
	  an entry to the sample config.

	  Change-Id: Iaef58ffb960191a21b713e8e0b51ce1fcd47e433

2016-08-11 10:50 +0000 [ef0bf47bb3]  Kevin Harwell <kharwell@digium.com>

	* alembic: add auth_username to endpoint's identify_by enum

	  A new identify_by option was added recently, auth_username. However, this
	  setting was not added as an allowable choice in the database enumeration
	  value.

	  This patch updates the current enumeration, adding in the new setting.

	  ASTERISK-26268 #close

	  Change-Id: Ib4788e8485e4cd40172ec0abbf5810a147ab8bf8

2016-08-08 14:50 +0000 [a1d6b14c40]  Richard Mudgett <rmudgett@digium.com>

	* res_srtp: Move SDP SRTP code from the core to res_srtp.

	  A patch made to the master branch (Now the 14 branch) inadvertently made
	  libsrtp a required dependency in order to compile Asterisk.  Rather than
	  create dummy defines to substitute for the defines supplied by libsrtp
	  when libsrtp is not available, most of the code in sdp_srtp.c is moved
	  into res_srtp.c.  This gets more code out of Asterisk's core that isn't
	  used when SRTP is not available.  This also makes another inadvertent
	  required dependency on libsrtp by Asterisk's core unlikely.

	  ASTERISK-26253 #close
	  Reported by: Ben Merrills

	  Change-Id: I0a46cde81501c0405399c2588633ae32706d1ee7

2016-08-09 12:07 +0000 [a783e1e60d]  Kevin Harwell <kharwell@digium.com>

	* alembic/sqlalchemy: auto increment only allowed on a single column

	  The extensions table defined two columns (id and priority) as primary key
	  autoincrement columns. However only one is allowed when defining the primary
	  key.

	  This patch removes the autoincrement attribute from the priority column since
	  it does not need to be as such and really should not have been on there in the
	  first place.

	  This patch also removes 'context', 'exten', and 'priority' from the primary key
	  index and creates a new combined unique contraint index on them.

	  ASTERISK-26183 #close

	  Change-Id: Ib9c712c612a4d7ec1edb0dcb77f1bae0905a470b

2016-08-10 11:47 +0000 [9c56f798f6]  gtjoseph <gjoseph@digium.com>

	* res_resolver_unbound:  Allow compilation with libunbound version < 1.5

	  libunbound at version 1.4.20 (which CentOS still uses) declared all
	  of their string function parameters as as 'char *'.  1.4.21 changed
	  them all to 'const char *'.  Thankfully 1.4.21 also introduced the
	  UNBOUND_VERSION_MAJOR define so configure now checks for that and
	  sets HAVE_UNBOUND_CONST_PARAMS.  res_resolver_unbound then checks
	  that and casts away the 'const' if it's not set.

	  Tested compile and testsuite on CentOS6 (1.4.20), Ubuntu14 (1.4.22) and
	  Fedora24 (1.5.4).  There are a few failing tests to be addressed though.

	  ASTERISK-26283 #close

	  Change-Id: Ib708b19b706c5d0ba7b7d5473e6df339d9ae4148

2016-08-01 16:13 +0000 [1ad00c1c30]  gtjoseph <gjoseph@digium.com>

	* menuselect:  Add an opaque "member_data" string to the acceptable xml

	  Change-Id: Id5ac43b95c8d7395f3be37f983632169db3d1afe

2016-07-17 18:28 +0000 [815b6f72f8]  gtjoseph <gjoseph@digium.com>

	* pjproject_bundled:  Update for pjproject 2.5.5

	  Add more --disable-* switches to Makefile.rules including
	  --disable-opus which was causing bundled pjproject to fail with
	  "undefined reference" errors in libasteriskpj.

	  Changed PJ_ENABLE_EXTRA_CHECK to 1.

	  Removed 2 obsolete patches and added a new one.
	  The new one was merged by Teluu on 6/27/2016.

	  ASTERISK-26148 #close

	  Change-Id: Ib8af6c6a9d31f7238ce65b336134c2efdc855063
	  (cherry picked from commit 4cf02b5584ce33bb0a64408c27bf20c19bc4ce13)

2016-07-29 13:13 +0000 [c95b611a73]  Mark Michelson <mmichelson@digium.com>

	* Remove SILK payload mappings from Asterisk core.

	  SILK is a bit of a hog when it comes to using up our limited number of
	  dynamic payload types in the RTP engine. By freeing up four slots, it
	  allows for other codecs to potentially take the place.

	  Now, codec_silk.so will dynamically use the payload slots in the RTP
	  engine when it loads.

	  A better fix would be make RTP dynamic payload types actually
	  dynamic. However, at this stage of Asterisk 14 development, this is a
	  risky move that would be imprudent.

	  Change-Id: I5774e09408f9a203db189529eabdc0d3f4c1e612

2016-07-27 12:36 +0000 [bc94ccbcdd]  Kevin Harwell <kharwell@digium.com>

	* rtp_engine: Failed assertion and wrong name given for codec

	  Fixed an assert check that would trigger when the passed in value was negative.
	  The negative value was being cast to an unsigned value. This resulted in the
	  check failing.

	  Also fixed another problem when loading formats in the engine. When setting the
	  mime type the format's name was being passed in instead of the codec's name.

	  Change-Id: I1a201cd419ba4d8e9a40d337e36b6fbe1737192c

2016-07-26 23:19 +0000  Asterisk Development Team <asteriskteam@digium.com>

	* asterisk 14.0.0-beta1 Released.

2016-07-26 17:22 +0000 [a7233fbf3e]  Mark Michelson <mmichelson@digium.com>

	* Release summaries: Add summaries for 14.0.0-beta1

2016-07-26 16:24 +0000 [c327430ea0]  Mark Michelson <mmichelson@digium.com>

	* Release summaries: Remove previous versions

2016-07-26 16:24 +0000 [763a18bc9d]  Mark Michelson <mmichelson@digium.com>

	* .version: Update for 14.0.0-beta1

2016-07-26 16:24 +0000 [ce6898bd3c]  Mark Michelson <mmichelson@digium.com>

	* .lastclean: Update for 14.0.0-beta1

2016-07-26 16:24 +0000 [ebc477aa5d]  Mark Michelson <mmichelson@digium.com>

	* realtime: Add database scripts for 14.0.0-beta1

2016-07-26 16:00 +0000 [1838b283aa]  Mark Michelson <mmichelson@digium.com>

	* ChangeLog: Updated for 14.0.0

2016-07-26 15:02 +0000 [f196cf975d]  Mark Michelson <mmichelson@digium.com>

	* Release summaries: Add summaries for 14.0.0

2016-07-26 14:01 +0000 [699a7390eb]  Mark Michelson <mmichelson@digium.com>

	* .version: Update for 14.0.0

2016-07-26 14:01 +0000 [4b17a11d7d]  Mark Michelson <mmichelson@digium.com>

	* .lastclean: Update for 14.0.0

2016-07-26 14:01 +0000 [bb9dcae98c]  Mark Michelson <mmichelson@digium.com>

	* realtime: Add database scripts for 14.0.0

2016-07-24 18:27 +0000 [90f445729d]  gtjoseph <gjoseph@digium.com>

	* menuselect:  Various menuselect enhancements

	  * Add 'external' as a support level.
	  * Add ability for module directories to add entries to the menu
	    by adding members to the <module_prefix>/<module_prefix>.xml file.
	  * Expand the description field to 3 lines in the ncurses implementation.
	  * Allow the description field to wrap in the newt implementation.
	  * Add description field to the gtk implementation.

	  Change-Id: I7f9600a1984a42ce0696db574c1051bc9ad7c808

2016-07-24 16:51 +0000 [f75401b1e3]  Joshua Colp <jcolp@digium.com>

	* ari: Update version.

	  New functionality has been added so the version has been
	  bumped to one over the 13 version.

	  Change-Id: I5d30077f62640c0ac83599b4e9a9b657bf184f69

2016-07-23 08:51 +0000 [58759bd77c]  gtjoseph <gjoseph@digium.com>

	* asterisk.c:  Add auto generation and persistence of UUID

	  Upcoming features will require the generation and persistence
	  of a UUID.

	  Change-Id: I3ec0062427e133217db6ef496a4216f427c3b92d

2016-07-22 14:44 +0000 [46b4e673ae]  Mark Michelson <mmichelson@digium.com>

	* Fix sqlalchemy error regarding identifier length.

	  sqlalchemy was complaining:

	  sqlalchemy.exc.IdentifierError: Identifier
	  'ps_contacts_qualifyfreq_exptime' exceeds maximum length of 30
	  characters

	  This fixes the problem by changing the index name to be
	  "ps_contacts_qualifyfreq_exp" instead.

	  ASTERISK-26227 #close
	  Reported by Mark Michelson

	  Change-Id: I0ed784f87504be2a59ee8d3242ef6f625d5ed1a9

2016-07-22 07:01 +0000 [633c34c411]  gtjoseph <gjoseph@digium.com>

	* build_tools: Update make_version for 14

	  Also remove svn stuff

	  Change-Id: I95d762f7cbbe5eb01117bde8779515d51a0bb06a

2016-07-19 13:39 +0000 [c82f24f36a]  Alexander Traud <pabstraud@compuserve.com>

	* codecs: Add iLBC 20.

	  Asterisk already supported iLBC 30. This change adds iLBC 20. Now, Asterisk
	  defaults to iLBC 20 but falls back to iLBC 30, when the remote party requests
	  this.

	  ASTERISK-26218 #close
	  ASTERISK-26221 #close
	  Reported by: Aaron Meriwether

	  Change-Id: I07f523a3aa1338bb5217a1bf69c1eeb92adedffa

2016-07-15 16:16 +0000 [6e2e3915c8]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Whitespace and comment cleanup.

	  Change-Id: I11139a4a95df34e223ba622aa6227e33ab8f6c38

2016-07-19 13:18 +0000 [5efb5b38e8]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi.c: Fix deadlock potential in fax redirection.

	  The dahdi_handle_dtmf() and my_handle_dtmf() have the potential to
	  deadlock if an incoming fax happens during the Playback or similar
	  application.

	  * Fixed the potential deadlock by not calling ast_async_goto() with the
	  channel lock held.

	  ASTERISK-26216 #close
	  Reported by: Richard Mudgett

	  Change-Id: I9144b84ade5f96690996624ec8a2d40c56af40aa

2016-07-13 18:49 +0000 [a1d36c89e0]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix deadlock potential in fax redirection.

	  The sip_read() has the potential to deadlock if an incoming fax happens
	  during the Playback or similar application.

	  * Fixed the potential deadlock by not calling ast_async_goto() with the
	  channel lock held.

	  * Made always eat the fax detection frame whether there is a fax extension
	  or not.

	  ASTERISK-26216
	  Reported by: Richard Mudgett

	  Change-Id: I6d3f5cccd4b77c3aa6ffc1a54c0f6bde61c9278e

2016-07-13 18:48 +0000 [4dfadcb025]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip.c: Fix deadlock potential in fax redirection.

	  The chan_pjsip_cng_tone_detected() has the potential to deadlock if an
	  incoming fax happens during the Playback or similar application.

	  * Fixed the potential deadlock by not calling ast_async_goto() with the
	  channel lock held.

	  * Made always eat the fax detection frame whether there is a fax extension
	  or not.

	  ASTERISK-26216
	  Reported by: Richard Mudgett

	  Change-Id: I32aecbb4818af646dc5a619f0dc040e9b1f222e5

2016-07-12 17:33 +0000 [964ae54ecf]  Richard Mudgett <rmudgett@digium.com>

	* res_fax.c: Fix deadlock potential in FAXOPT(faxdetect) framehook.

	  The fax_detect_framehook() has the potential to deadlock if an incoming
	  fax happens during the Playback or similar application.

	  * Fixed the potential deadlock by not calling ast_async_goto() with the
	  channel lock held.

	  * Made always eat the fax detection frame whether there is a fax extension
	  or not.

	  * Made only detach the framehook if we detected a fax and not on other
	  possible frames.

	  ASTERISK-26216
	  Reported by: Richard Mudgett

	  Change-Id: I99da35c26d1cd802626ffb4c1b4eb5b015581b6d

2016-07-12 17:24 +0000 [c3462adeb8]  Richard Mudgett <rmudgett@digium.com>

	* res_fax: Fix FAXOPT(faxdetect) timeout option.

	  The fax detection timeout option did not work because basically the wrong
	  variable was checked in fax_detect_framehook().  As a result, the timer
	  would timeout immediately and disable fax detection.

	  * Fixed ignoring negative timeout values.  We'd complain and then go right
	  on using the negative value.

	  * Fixed destroy_faxdetect() in the off-nominal case of an incomplete
	  object creation.

	  * Added more range checking to FAXOPT(gateway) timeout parameter.

	  ASTERISK-26214 #close
	  Reported by: Richard Mudgett

	  Change-Id: Idc5e698dfe33572de9840bc68cd9fc043cbad976

2016-07-18 16:16 +0000 [c03e27c1c8]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi: Add faxdetect_timeout option.

	  The new option allows the channel driver's faxdetect option to timeout on
	  a call after the specified number of seconds into a call.  The new feature
	  is disabled if the timeout is set to zero.  The option is disabled by
	  default.

	  * Don't clear dsp_features after passing them to the dsp code in
	  my_pri_ss7_open_media().  We should still remember them especially for the
	  new faxdetect_timeout option.

	  ASTERISK-26214
	  Reported by: Richard Mudgett

	  Change-Id: Ieffd3fe788788d56282844774365546dce8ac810

2016-07-15 20:44 +0000 [d11731ac2f]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Add fax_detect_timeout endpoint option.

	  The new endpoint option allows the PJSIP channel driver's fax_detect
	  endpoint option to timeout on a call after the specified number of
	  seconds into a call.  The new feature is disabled if the timeout is set
	  to zero.  The option is disabled by default.

	  ASTERISK-26214
	  Reported by: Richard Mudgett

	  Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d

2016-07-21 10:28 +0000 [56b4112659]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_pubsub: fixed a bug when pjsip_tx_data_dec_ref is called twice.

	  This patch removed call of pjsip_tx_data_dec_ref in send_notify
	  if send_request failed.
	  The pjsip_dlg_send_request deletes the message on error by itself.

	  It seems this patch fixes next issues:
	  ASTERISK-26199
	  ASTERISK-26166
	  ASTERISK-26174

	  Change-Id: I8b05917c93d993f95d604c042ace5f1a5500f59a

2016-07-21 09:05 +0000 [52cbdf2393]  gtjoseph <gjoseph@digium.com>

	* chan_sip: Prevent deadlock when issuing "sip show channels"

	  sip_show_channels locks the dialogs container first then locks each
	  sip_pvt so it can spit out the details.  The rest of sip dialog
	  processing locks the sip_pvt first then locks the dialogs container
	  if it needs to.  Both lock in the order they need but deadlocks can
	  result.  To fix, sip_show_channels and sip_show_channelstats have
	  been converted to use an iterator rather than ao2_callback.  This way
	  the container is locked only while getting the next entry and is
	  unlocked when the callback is called.

	  ASTERISK-23013 #close

	  Change-Id: Id9980419909e811f89484950ed46ef117b9eb990

2016-07-13 05:24 +0000 [2103ad1fec]  Alexander Traud <pabstraud@compuserve.com>

	* res_srtp: Enable AES-256 and AES-GCM.

	  ASTERISK-26190 #close

	  Change-Id: I11326d80edd656524a51a19450e586c583aa0a0b

2016-07-18 22:46 +0000 [05cfe1a76e]  Corey Farrell <git@cfware.com>

	* Add conditional support for noreturn functions.

	  This adds support for tagging functions with the noreturn attribute.
	  If DO_CRASH is enabled then ast_do_crash never returns.  If AST_DEVMODE
	  and DO_CRASH are enabled then failed assertions never return.  This can
	  resolve a large number of false positives with static analyzers.

	  ASTERISK-26220 #close

	  Change-Id: Icfb61e5fe54574eced4c3e88b317244f467ec753

2016-07-15 19:28 +0000 [0c88fb460f]  Corey Farrell <git@cfware.com>

	* pbx: Create pbx_sw.c for management of 'struct ast_sw'.

	  This changes context switches from a linked list to a vector, makes
	  'struct ast_sw' opaque to pbx.c.

	  Although ast_walk_context_switches is maintained the procedure is no
	  longer efficient except for the first call (inc==NULL).  This
	  functionality is replaced by two new functions implemented by vector
	  macros.
	  * ast_context_switches_count (AST_VECTOR_SIZE)
	  * ast_context_switches_get (AST_VECTOR_GET)

	  As with ast_walk_context_switches callers of these functions are
	  expected to have locked contexts.  Only a few places in Asterisk walked
	  the switches, they have been converted to use the new functions.

	  Change-Id: I08deb016df22eee8288eb03de62593e45a1f0998

2016-07-19 04:48 +0000 [6fca2b3bf0]  Alexander Traud <pabstraud@compuserve.com>

	* Makefile: Retain XML Declaration and DTD in docs.

	  Since Asterisk 12, the documentation got an XML Stylesheet. Because of a typo,
	  the XML Declaration and DTD were overwritten by this.

	  ASTERISK-26212 #close

	  Change-Id: If5ee4625068042e98ab3fcb22a25e2f15d0c68bd

2016-07-18 18:40 +0000 [cf1188a1be]  Corey Farrell <git@cfware.com>

	* Unit tests: Use AST_TEST_DEFINE in conditional code only.

	  If AST_TEST_DEFINE is not conditional to TEST_FRAMEWORK it produces dead
	  code.  This places all existing unit tests into a conditional block if
	  they weren't already.

	  ASTERISK-26211 #close

	  Change-Id: I8ef83ee11cbc991b07b7a37ecb41433e8c734686

2016-07-18 09:22 +0000 [e9daa34261]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_mwi: remove unneeded check on endpoint's contacts.

	  The function create_mwi_subscriptions_for_endpoint checks
	  if there is active contacts by retrieving aors and contacts.

	  This function is used to create all unsolicited mwi subscriptions
	  on startup and is used when contact added.

	  In both cases it's not necessary to check if there are contacts.
	  The contacts are needed when asterisk sends mwi.

	  ASTERISK-26200 #close

	  Change-Id: I98e43bdc97f3c0829951cd9bf5f3c6348c6ac1fa

2016-07-18 05:13 +0000 [cb5e3445be]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: Count a roll-over of the sequence number even on lost packets.

	  With this change, the initial RTP sequence number is randomly chosen not between
	  0 and 65535 (0xffff) but 0 and 32767 (0x7fff). This assures, the roll-over
	  counter (ROC) synchronization is not lost for sRTP, when the very first RTP
	  packets get lost; see http://srtp.sourceforge.net/faq.html#Q6

	  ASTERISK-26207 #close

	  Change-Id: I9a527e3aa3ce8f3becc5131d7ba32b57b5845464

2016-07-18 04:14 +0000 [6428580e7f]  Alexander Traud <pabstraud@compuserve.com>

	* Makefile: Suppress echoing of target 'config' again.

	  ASTERISK-26038 #close

	  Change-Id: I5746cf639f3fdc6332e8a97cf01f979e30bf403f

2016-07-15 02:59 +0000 [e2e8713b84]  Corey Farrell <git@cfware.com>

	* pbx: Create pbx_ignorepat.c for management of 'struct ast_ignorepat'.

	  This changes context ignore patterns from a linked list to a vector,
	  makes 'struct ast_ignorepat' opaque to pbx.c.

	  Although ast_walk_context_ignorepats is maintained the procedure is no
	  longer efficient except for the first call (inc==NULL).  This
	  functionality is replaced by two new functions implemented by vector
	  macros.
	  * ast_context_ignorepats_count (AST_VECTOR_SIZE)
	  * ast_context_ignorepats_get (AST_VECTOR_GET)

	  As with ast_walk_context_ignorepats callers of these functions are
	  expected to have locked contexts.  Only a few places in Asterisk walked
	  the ignorepats, they have been converted to use the new functions.

	  Change-Id: I78f2157d275ef1b7d624b4ff7d770d38e5d7f20a

2016-07-14 13:51 +0000 [be36bd7ca5]  Corey Farrell <git@cfware.com>

	* pbx: Create pbx_include.c for management of 'struct ast_include'.

	  This changes context includes from a linked list to a vector, makes
	  'struct ast_include' opaque to pbx.c.

	  Although ast_walk_context_includes is maintained the procedure is no
	  longer efficient except for the first call (inc==NULL).  This
	  functionality is replaced by two new functions implemented by vector
	  macros.
	  * ast_context_includes_count (AST_VECTOR_SIZE)
	  * ast_context_includes_get (AST_VECTOR_GET)

	  As with ast_walk_context_includes callers of these functions are
	  expected to have locked contexts.  Only a few places in Asterisk walked
	  the includes, they have been converted to use the new functions.

	  const have been applied where possible to parameters for ast_include
	  functions.

	  Change-Id: Ib5c882e27cf96fb2aec67a39c18b4c71c9c83b60

2016-07-14 03:25 +0000 [d3348c51b5]  Corey Farrell <git@cfware.com>

	* features.c: Remove unneeded adsi.h include.

	  adsi.h is no longer used by features.c since parking was moved to a
	  module.

	  Change-Id: I2248b8a455225a17cb6ddaafd6c20c511a1eaf59

2016-06-30 15:58 +0000 [273052f404]  Mark Michelson <mmichelson@digium.com>

	* Update support for SILK format.

	  This commit adds scaffolding in order to support the SILK audio format
	  on calls. Roughly, this is what is added:

	  * Cached silk formats. One for each possible sample rate.
	  * ast_codec structures for each possible sample rate.
	  * RTP payload mappings for "SILK".

	  In addition, this change overhauls the res_format_attr_silk file in the
	  following ways:

	  * The "samplerate" attribute is scrapped. That's native to the format.
	  * There are far more checks to ensure that attributes have been
	    allocated before attempting to reference them.
	  * We do not SDP fmtp lines for attributes set to 0.

	  These changes make way to be able to install a codec_silk module and
	  have it actually work. It also should allow for passthrough silk calls
	  in Asterisk.

	  Change-Id: Ieeb39c95a9fecc9246bcfd3c45a6c9b51c59380e

2016-07-14 07:45 +0000 [31967dacdf]  Richard Miller (license 5685)

	* app_queue: Only remove queue member from pending when state changes.

	  It is possible for a not in use state change to occur multiple
	  times causing a queue member to be removed from the pending call
	  container prematurely.

	  The first not in use state change will remove the queue member
	  from the container. At this moment the member may be called and
	  placed in the pending container. After this another not in use
	  state change can be received which will remove it from the
	  container. Despite being called at this point the code will
	  incorrectly see that there are no pending calls to it.

	  This change only removes it from the pending container if the
	  state has actually changed.

	  ASTERISK-26133 #close
	  patches:
	    app_queue.diff submitted by Richard Miller (license 5685)

	  Change-Id: Ie5a7f17a44f98e9159e9b85009ce3f8393aa78c0

2016-07-14 02:40 +0000 [f3608b50d7]  Corey Farrell <git@cfware.com>

	* pbx: Fix leak of timezone for time based includes.

	  Create include_free to run ast_destroy_timing and ast_free, use that in
	  all places that freed an ast_include structure.  This fixes a couple of
	  paths that previously did not run ast_destroy_timing.

	  ASTERISK-26196 #close

	  Change-Id: I1671bd111bef0dc113e8bf8f77f89fcfc395d838

2016-07-13 17:45 +0000 [63ac4c9487]  Kevin Harwell <kharwell@digium.com>

	* translate: explicit format destination not properly set

	  If the destination format's name differed from the codec name then the
	  translator's explict_dst field would be improperly set. In some circumstances
	  it would end up setting it to a newly created format that has the same name
	  as the codec when it actually needed to be the given destination codec.

	  This could cause the translation path to use the wrong format. For instance,
	  if an endpoint had specified 'myulaw' as a format the translator could end up
	  using a 'ulaw' format (with whatever/default settings) instead. If the format
	  attribute settings differed between the two then there may unexpected results
	  during processing.

	  This patch removes the name check when building the translation path. This
	  should make it always set the translator's explicit_dst to the given destination
	  format as long as the sample rate and types match.

	  Change-Id: Iaf8a03831d68e657d89569d54b505074efbefab5

2016-07-08 11:46 +0000 [2f26512fd8]  Richard Mudgett <rmudgett@digium.com>

	* stasis_endpoint.c: Fix contactstatus_to_json().

	  The roundtrip_usec json member is optional.  If it isn't present then
	  don't put it into the converted json structure where ast_json_pack()
	  will choke on it.

	  Change-Id: I39bb2f86154ef54591270c58bfda8635070f9ea0

2016-07-11 10:22 +0000 [bc1ff41be7]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_options.c: Fix container operation.

	  aor_observer_deleted() needs to operate on all contacts found for the
	  deleted AOR instead of only the first one found.  This is really only a
	  problem if there is more than one contact for the AOR.

	  Change-Id: Id24ac0d5e8c931330231fb45dd2a331a84339dc1

2016-07-11 10:21 +0000 [eabcfeeaa3]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_configuration.c: Misc cleanups.

	  * Fix some whitespace in various routines.

	  * Rename i to iter in persistent_endpoint_update_state().

	  * Fix off-nominal copy/paste message wording in
	  persistent_endpoint_contact_deleted_observer()

	  Change-Id: Id8e34f5d09e7eebac3af22501c44c1110a3e29d8

2016-07-13 13:45 +0000 [f73ddde7d4]  Corey Farrell <git@cfware.com>

	* chan_sip: Fix reference leak in mwi_event_cb

	  Cleanup the peer reference when stasis_subscription_final_message is
	  true.  Also free peer_name even if peer exists, after reload a new
	  peer_name will be allocated.

	  ASTERISK-26193 #close

	  Change-Id: If7ecd52facdc5c227f701c760841e3f6ca53cc69

2016-07-13 11:30 +0000 [fd54d69feb]  Corey Farrell <git@cfware.com>

	* threadpool: Fix leak in ast_threadpool_serializer_group error path.

	  ast_threadpool_serializer_group leaks a reference to ser when listener
	  is allocated but tps is not.  Although listener takes the reference to
	  ser cleanup functions are not run without tps.

	  ASTERISK-26191 #close

	  Change-Id: Ie3ccf69a3f1e676c2ef62a77067c0cb57dc9a585

2016-06-22 07:13 +0000 [85212f2799]  Eugene Voityuk <eugene@thirdlane.com>,Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: Enable Forward Secrecy (PFS) for DTLS.

	  Since July 2014, TLS based protocols (SIP over TLS, Secure WebSockets, HTTPS)
	  support PFS thanks to ASTERISK-23905. In July 2015, the same feature was added
	  for DTLS. The source code from main/tcptls.c should have been re-used to ease
	  security audits. Therefore, this change rolls back the change from July 2015 and
	  re-uses the code from July 2014. This has the additional benefits to work under
	  CentOS 7 and enabling not just ECDHE but DHE based cipher suites as well.

	  ASTERISK-25659 #close
	  Reported by: StefanEng86, urbaniak, pay123
	  Tested by: sarumjanuch, traud
	  patches:
	  res_rtp_asterisk.patch submitted by sarumjanuch
	  dtls_centos_step_1.patch submitted by traud
	  dtls_centos_step_2.patch submitted by traud

	  Change-Id: I537cadf4421f092a613146b230f2c0ee1be28d5c

2016-06-24 19:55 +0000 [0d487b53b1]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_session: Check for presence of an active negotiator

	  It is possible in a hypothetical situation for a session refresh to be
	  invoked on a PJSIP when the negotiatior on the INVITE session has not
	  yet been established. While this shouldn't occur with existing uses of
	  ast_sip_session_refresh, the crashes that occur due to improperly
	  calling PJSIP functions that expect a non-NULL negotiatior are
	  avoidable. PJSIP will create the negotiator in pjsip_inv_reinvite; this
	  means that simply checking for the presence of the negotiator before
	  passing it to other PJSIP functions that use it is allowable. As such,
	  this patch adds checks for the presence of the negotiator before calling
	  PJSIP functions that assume it is non-NULL.

	  Change-Id: I1028323e7e01b0a531865e5412a71b6f6ec4276d

2015-10-19 18:55 +0000 [c49833653b]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_pubsub: Add additional debug statements

	  When something very sad and wrong occurs, it's challenging sometimes to
	  figure out why. This patch adds some additional debug statements on
	  off-nominal paths to try and make debugging easier.

	  Change-Id: I7bffb73cc733b6f80193a23340881db4a102b640

2015-10-19 18:55 +0000 [f12311ee69]  Matt Jordan <mjordan@digium.com>

	* res/res_corosync: Raise a Stasis message on node join/leave events

	  When res_corosync detects that a node leaves or joins, it currently is
	  informed of this via Corosync callbacks. However, there are a few
	  limitations with the information presented:
	  (1) While we have information that Corosync is aware of - such as the
	      Corosync nodeid - that information is really only useful inside of
	      Corosync or res_corosync. There's no way to translate a Corosync
	      nodeid to some other internally useful unique identifier for the
	      Asterisk instance that just joined or left the cluster.
	  (2) While res_corosync is notified of the instance joining or leaving
	      the cluster, it has no mechanism to inform the Asterisk core or
	      other modules of this event. This limits the usefulness of res_corosync
	      as a heartbeat mechanism for other modules.

	  This patch addresses both issues.

	  First, it adds the notion of a cluster discovery message both within the
	  Stasis message bus, as well as the binary event messages that
	  res_corosync uses to transmit data back and forth within the cluster.
	  When Asterisk joins the cluster, it sends a discovery message to the other
	  nodes in the cluster, which correlates the Corosync nodeid along with
	  the Asterisk EID. res_corosync now maintains a hash of Corosync nodeids
	  to Asterisk EIDs, such that it can map changes in cluster state with the
	  Asterisk instance that has that nodeid. Likewise, when an Asterisk
	  instance receives a discovery message from a node in the cluster, it now
	  sends its own discovery message back to the originating node with the
	  local Asterisk EID. This lets Asterisk instances within the cluster
	  build a complete picture of the other Asterisk instances within the
	  cluster.

	  Second, it publishes the discovery messages onto the Stasis message bus.
	  Said messages are published whenever a node joins or leaves the cluster.
	  Interested modules can subscribe for the ast_cluster_discovery_type()
	  message under the ast_system_topic() and be notified when changes in
	  cluster state occur.

	  Change-Id: I9015f418d6ae7f47e4994e04e18948df4d49b465

2016-07-13 08:57 +0000 [a3f4141f6f]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid obsolete warning with pthread.m4 on autoconf.

	  Updated the macro-set autoconf/ax_pthread.m4 to its latest upstream version.

	  ASTERISK-26046 #close

	  Change-Id: I11abc11d17acd2b6a8a5a5be8ae8e0949dab9cc7

2016-07-11 20:07 +0000 [886f2cab23]  gtjoseph <gjoseph@digium.com>

	* rest_api/channels:  Fix multiple issues with create and dial

	  * We weren't properly subscribing to the channel and it's originator
	    on create.
	  * We weren't doing a publish_dial after calling ast_call on dial.
	  * We weren't calling depart_bridge when a channel left the dial bridge.

	  The first 2 issues were causing events to not be generated and the third
	  was actually causing channels to not get properly destroyed when hung up.

	  Together these 3 issues were causing the new
	  rest_apichannels/create_dial_bridge tests to fail.

	  As a result of the fixes, the cdr state machine had to be slightly
	  tweaked to allow bridge leave events without asserting and the tests
	  themselves had to be updated to account for the channels now cleaning
	  themselves up.

	  Change-Id: Ibf23abf5a62de76e82afb4461af5099c961b97d8

2016-07-11 10:25 +0000 [b85446d039]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix statsd regression.

	  The ASTERISK-25904 change-id I8fad8aae9305481469c38d2146e1ba3a56d3108f
	  patch introduced several regressions when the newly created "Updated"
	  state goes out for each endpoint registration refresh.

	  1) It restarted any OPTIONS RTT ping cycle.

	  2) It would interfere with a currently active ping and throw off that
	  ping's resulting RTT calculation.

	  3) It cleared the RTT time each time the endpoint was refreshed.

	  4) The cleared RTT time was sent out as a statsd update each time.

	  5) It created two AMI events for each update.

	  * Revert the original patch and reimplement it.  Now the current contact
	  status state is re-sent instead of the state being momentarily toggled
	  every time the endpoint refreshes its registration.  The statsd events are
	  not created for the re-sent refresh because they are sent after every
	  OPTIONS ping.

	  ASTERISK-26160 #close
	  Reported by: Matt Jordan

	  Change-Id: Ie072be790fbb2a8f5c1c874266e4143fa31f66d1

2016-07-10 19:08 +0000 [4ad333bb0e]  Joshua Colp <jcolp@digium.com>

	* func_odbc: Fix connection deadlock.

	  The func_odbc module was modified to ensure that the
	  previous behavior of using a single database connection
	  was maintained. This was done by getting a single database
	  connection and holding on to it. With the new multiple
	  connection support in res_odbc this will actually starve
	  every other thread from getting access to the database as
	  it also maintains the previous behavior of having only
	  a single database connection.

	  This change disables the func_odbc specific behavior if
	  the res_odbc module is running with only a single database
	  connection active. The connection is only kept for the
	  duration of the request.

	  ASTERISK-26177 #close

	  Change-Id: I9bdbd8a300fb3233877735ad3fd07bce38115b7f

2016-07-12 03:50 +0000 [110b01a0bc]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Allow own CFLAGS on ./configure.

	  Before this change, make failed with the error
	  Unknown value '' found in build_tools/menuselect-deps for NATIVE_ARCH
	  when CFLAGS were supplied to the configure script. This was introduced with
	  <https://reviewboard.asterisk.org/r/1852/> which disabled BUILD_NATIVE when
	  CFLAGS were supplied. Those who need different -march= values, please, go for
	  ./configure
	  make menuselect.makeopts or make menuselect
	  ./menuselect/menuselect --disable BUILD_NATIVE

	  ASTERISK-25289 #close

	  Change-Id: Ic6365d5a97bb9b3556858f06432a8d1cfa83eebc

2016-07-11 13:42 +0000 [44f16af7cc]  Richard Mudgett <rmudgett@digium.com>

	* ast_expr2: Fix off-nominal memory leak.

	  Thanks to ibercom for pointing out a memory leak that was missed
	  in the earlier patch for the issue.

	  ASTERISK-26119
	  Reported by: Alexei Gradinari

	  Change-Id: I9a151f5c4725d97fb82a9e938bc73dc659532b71

2016-07-11 10:17 +0000 [8476a9332f]  Alexander Traud <pabstraud@compuserve.com>

	* install_prereq: Checkout of libSRTP 1.5.x.

	  Since 5th November 2014, the master branch of libSRTP changed the prefix of
	  several member names and is not compatible with the source code in Asterisk
	  anymore. Therefore instead, this change checks out the latest version of the
	  libSRTP 1.5.x branch. Furthermore now, libSRTP is compiled with OpenSSL as
	  backend. This makes AES-GCM and AES-IN possible.

	  ASTERISK-22131 #close

	  Change-Id: I2e396cdc01da0ff610686e398ed210ca7408f7d6

2016-07-09 13:32 +0000 [ad30d60c69]  Corey Farrell <git@cfware.com>

	* chan_sip: Fix reference leaks in error paths.

	  * get_sip_pvt_from_replaces leaks sip_pvt_ptr on any error.
	  * build_peer leaks peer on failure to allocate the endpoint.

	  This patch fixes get_sip_pvt by using an RAII_VAR, build_peer is fixed
	  with an unref in the appropriate place.

	  ASTERISK-26184 #close

	  Change-Id: I728b424648ad041409f7d90880f4c28b3ce2ca12

2016-07-07 12:44 +0000 [7408c51a48]  Corey Farrell <git@cfware.com>

	* REF_DEBUG: Prevent logging of container node objects.

	  Using AO2_CONTAINER_ALLOC_OPT_DUPS_REPLACE can result in an unref being
	  recorded to the refs log for the node being replaced.  This prevents
	  logging of those unrefs since they would produce errors in
	  refcounter.py.

	  ASTERISK-26181 #close

	  Change-Id: Ie4fded84e8a1a58b3a59ce59dfd7eb0da3ddc5d4

2016-07-04 16:38 +0000 [c832f100d9]  Alexei Gradinari <alex2grad@gmail.com>

	* res_sorcery_realtime: fix bug when successful UPDATE is treated as failed

	  If the SQL UPDATE statement changes nothing then SQLRowCount returns 0.
	  This value should be treated as success.
	  But the function sorcery_realtime_update treats it as failed.

	  This bug was found using stress tests on PJSIP.
	  If there are 2 consecutive SIP REGISTER requests with the same contact data
	  during 1 second then res_pjsip_registrar adds contact location on 1st request
	  and tries to update contact location on 2nd.
	  The update fails and res_pjsip_registrar even removes correct contact location.

	  The test "object_update_uncreated" was removed from test_sorcery_realtime.c
	  because it's now a valid situation.

	  This patch also adds missing debug of extra SQL parameter.

	  ASTERISK-26172 #close

	  Change-Id: I05a7f3051455336c9dda29efc229decf86071303

2016-07-07 10:38 +0000 [302be4809a]  Joshua Colp <jcolp@digium.com>

	* chan_sip/res_pjsip_t38: Handle a request to negotiate T.38 after it is enabled.

	  Some T.38 implementations may send another re-invite after the initial
	  one which adds additional negotiation details (such as the max bitrate).
	  Currently this will fail when passthrough is being done in chan_sip as we
	  do nothing if T.38 is already active.

	  Other handlers of T.38 inside of Asterisk (such as res_fax) handle this
	  scenario so this change adds support for it to chan_sip and res_pjsip_t38.
	  If a request to negotiate is received while T.38 is already enabled a
	  new re-INVITE is sent and negotiation is done again.

	  ASTERISK-26179 #close

	  Change-Id: I0298494d3da6df3219bbfa4be9aa04015043145c

2016-07-07 10:55 +0000 [fb96492ec4]  Scott Griepentrog <scott@griepentrog.com>

	* PJSIP: provide valid tcp nodelay option for reuse

	  When using TCP transport with chan_pjsip, the TCP_NODELAY
	  option value was allocated on the stack, then passed as a
	  pointer to the tcp transport configuration structure, and
	  later re-used on subsequently created sockets when it was
	  no longer valid.  This patch changes the allocation to be
	  a static.

	  ASTERISK-26180 #close
	  Reported by: Scott Griepentrog

	  Change-Id: I3251164c7f710dbdab031282f00e30a9770626a0

2016-07-06 09:29 +0000 [1c949eea6c]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: Added "subscribe_context" to endpoint

	  If specified, incoming SUBSCRIBE requests will be searched for the matching
	  extension in the indicated context. If no "subscribe_context" is specified,
	  then the "context" setting is used.

	  ASTERISK-25471 #close

	  Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514

2016-07-04 05:58 +0000 [32cb981d04]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid obsolete warning with libcurl.m4 on autoconf.

	  Updated the macro-set autoconf/libcurl.m4 to its latest upstream version. This
	  avoids a warning about an obsolete macro on AC_HELP_STRING, because Asterisk is
	  using AS_HELP_STRING everywhere else already.

	  ASTERISK-26046

	  Change-Id: I8299faf504ceaeee3e39930c59293809e116c631

2016-06-22 17:26 +0000 [9f2c007254]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Don't send extra BYE if SDP invalid.

	  When an answer SDP is invalid we were disconnecting the outgoing call and
	  sending two BYE requests.  The first BYE was sent by PJPROJECT because of
	  the invalid SDP answer.  The second BYE was sent by Asterisk because it
	  thought the canceled call was the result of the RFC5407 section 3.1.2 race
	  condition.

	  * Made not send the BYE on a canceled session if the SDP negotiation is
	  incomplete because PJPROJECT has already sent a BYE for the failed
	  negotiation.

	  ASTERISK-25772 #close
	  Reported by:  Dmitriy Serov

	  Change-Id: I44ad0bd0605e8eeb7035c890d6f97a1331f1a836

2016-06-27 17:19 +0000 [08d3b9a89e]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: End call on initial invalid SDP negotiation.

	  When an incoming call defers SDP negotiation and then sends us an invalid
	  SDP in the ACK, we need to send a BYE to disconnect the call.  In this
	  case SDP negotiation has failed and we don't have valid media streams
	  negotiated.

	  ASTERISK-25772

	  Change-Id: Ia358516b0fc1e6c4c139b78246f10b9da7a2dfb8

2016-06-23 15:13 +0000 [e6e12c752c]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Register PJMEDIA error code decoder.

	  Registering the PJMEDIA error codes allows errors found when parsing an
	  incoming SDP to be easier to figure out.

	  "Missing SDP rtpmap for dynamic payload type (PJMEDIA_SDP_EMISSINGRTPMAP)"
	  is much easier to understand than "Unknown error 220030".

	  ASTERISK-25772

	  Change-Id: I44b2dcea656fedd7593171be9e845880a2c70ca0

2016-06-27 16:56 +0000 [5d2fc6bab7]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Remove unused parameter from handle_incoming().

	  Change-Id: Iedd182d189ec947c42edc2c66c4bda3c22060daa

2016-06-22 18:02 +0000 [656ed73ac6]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Add missing NULL checks when using pjsip_inv_end_session().

	  pjsip_inv_end_session() is documented as being able to return the
	  passed in tdata parameter set to NULL on success.

	  Change-Id: I09d53725c49b7183c41bfa1be3ff225f3a8d3047

2016-06-30 15:17 +0000 [4f7b859726]  Richard Mudgett <rmudgett@digium.com>

	* features: Fix channel datastore access.

	  Found as a result of the testsuite tests/callparking test crashing.

	  Several calls to ast_get_chan_featuremap_config() and
	  ast_get_chan_features_xfer_config() did not lock the channel before
	  calling so the channel's datastore list was accessed without the lock's
	  protection.  Apparently another thread deleted a datastore on the
	  channel's list while the crashing thread was walking the list.  Crash at
	  0xdeaddead due to MALLOC_DEBUG's memory filler value as a result.

	  * Add missing channel locks to calls that were not already protected
	  as the doxygen for those calls indicates.

	  Change-Id: Id273b3d305cc616406c353cbc841b2b7655efaa1

2016-06-30 08:25 +0000 [5ad7e1c09a]  gtjoseph <gjoseph@digium.com>

	* configure:  Fix HAVE_PJSIP_EVSUB_GRP_LOCK not set with external pjproject

	  There was a typo in configure.ac preventing HAVE_PJSIP_EVSUB_GRP_LOCK
	  from getting set when using an external pjproject.

	  ASTERISK-26099 #close
	  Reported-by: Ross Beer

	  Change-Id: I709af70428e125fb5ccd44b171d25dd29141f0ae

2016-06-29 15:31 +0000 [dab2a6b689]  Matt Jordan <mjordan@digium.com>

	* hep.conf.sample: Default 'enabled' to 'no'

	  Following the principle of least surprise, we should not be sending
	  massive numbers of PJSIP and RTCP HEP packets out into the ether to some
	  only-slightly-random IP address. Having 'enabled' set to 'no' in the
	  sample configuration file should prevent this from happening for those
	  who run 'make samples'.

	  ASTERISK-26159 #close

	  Change-Id: I1753a64ca83a3442a6ebdc31061f8185c062d9b1

2016-06-29 15:09 +0000 [9129ac8e73]  Matt Jordan <mjordan@digium.com>

	* pjproject/patches/config_site: Increase the max number of ICE candidates

	  When negotiating ICE candidates with WebRTC capable endpoints, many
	  networks will result in a browser offering ICE candidates that exceeds
	  the default number of max candidates, 16. This patch bumps the max
	  candidates to 32, with the max checks at twice the number of candidates.
	  In practice, this has shown to be sufficient for browser/WebRTC
	  negotiation.

	  Change-Id: Ifd8da8b315f5ae14814d4ce20e10d2e6355020e5

2016-06-28 09:00 +0000 [4045e6d8ba]  gtjoseph <gjoseph@digium.com>

	* codecs:  Fix ABI incompatibility created by adding format_name to ast_codec

	  Adding format_name even to the end of ast_codec caused issued with
	  binary codec modules because the pointer would be garbage in asterisk
	  when they registered.  So, the ast_codec structure was reverted and an
	  internal_ast_codec structure was created just for use in codec.c.  A new
	  internal-only API was also added (__ast_codec_register_with_format) so
	  that codec_builtin could register codecs with the format_name in a
	  separate parameter rather than in the ast_codec structure.

	  ASTERISK-26144 #close
	  Reported-by: Alexei Gradinari

	  Change-Id: I6df1b08f6a6ae089db23adfe1ebc8636330265ba

2016-06-28 08:22 +0000 [651290a809]  gtjoseph <gjoseph@digium.com>

	* BuildSystem:  Fix a few issues hightlighted by gcc 6.x

	  gcc 6.1.1 caught a few more issues.
	  Made sure the unit tests still pass for the func_env and stdtime
	  issues.

	  ASTERISK-26157 #close

	  Change-Id: I6664d8f34a45bc1481d2a854481c7878b0c1cf8e

2016-06-28 10:33 +0000 [83f2c2573b]  Matt Jordan <mjordan@digium.com>

	* configs/basic-pbx/modules.conf: Remove 'bad' modules

	  This patch removes the following modules:
	   - pbx_functions: It never existed.
	   - res_pjsip_log_forwarder: It no longer exists.
	   - res_hep_pjsip: The base HEP module wasn't loaded, and most basic PBXs
	                    aren't going to be installing HOMER
	   - res_pjsip_phoneprov_provider: The basic res_phoneprov module isn't
	                    loaded, and we aren't configured to make use of the
	                    module

	  Change-Id: Id91f68cae7c9c8c3d370029fe1268cb51e4ff5a5

2016-06-22 11:19 +0000 [75818b4084]  Joshua Colp <jcolp@digium.com>

	* siren: Add format attribute modules for Siren7 and Siren14.

	  This change removes hardcoded SDP parsing and generation for
	  Siren7 and Siren14 from chan_sip and moves it to format attribute
	  modules so it can also be used by chan_pjsip.

	  With this the fmtp lines for both are added with the bitrate
	  information.

	  ASTERISK-26021

	  Change-Id: Ibb004eda37a14c0a35ef0613f6237977fc800037

2016-06-23 04:33 +0000 [6e87bf746a]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid obsolete warning with AC_TYPE_SIGNAL on autoconf.

	  Removed the obsolete macro AC_TYPE_SIGNAL because Asterisk does not use K&R C
	  but requires ANSI C anyway.

	  ASTERISK-26046

	  Change-Id: I914c014385e1862102d90fe7650621def78db02e

2016-06-22 15:04 +0000 [8c7017f76e]  Corey Farrell <git@cfware.com>

	* res_fax: Fix reference leak in fax_v21_session_new.

	  fax_v21_session_new created a session details object but only released
	  the allocation reference during error conditions.  fax_session_new adds
	  it's own reference to details if needed so the caller is always
	  responsible for cleaning it's own reference.

	  ASTERISK-26141 #close

	  Change-Id: Ie7fc52a83b6596ce9ce2d5a2bd9f3e204f48fc88

2016-06-22 14:25 +0000 [6fa3ed0679]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: improve realtime performance #2

	  The patch removes updating all Endpoints' status on startup.
	  Instead, only non-qualified aors with static contact
	  and non-qualified non-expired contacts are retrieved from the realtime to
	  update the endpoint status to ONLINE.
	  The endpoint name was added to the contact object to simply find the endpoint
	  that created this contact.

	  The status of endpoints with qualified aors will be updated by 'qualify'
	  functions.

	  ASTERISK-26061 #close

	  Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df

2016-06-22 13:41 +0000 [d293ead077]  gtjoseph <gjoseph@digium.com>

	* res_rtp_asterisk:  Fix a self-comparison identified by gcc 6

	  gcc 6 caught a previously unidentified self-comparison in
	  ice_candidate_cmp.  Fixed it and re-ordered the predicates for better
	  short-circuiting.

	  ASTERISK-26140 #close

	  Change-Id: I3da713c568e24064430257b3502fbdafd35af7a7

2016-06-22 10:37 +0000 [c7309a5254]  gtjoseph <gjoseph@digium.com>

	* chan_unistim:  Fix memcpy in get_to_address

	  A code block only enabled when HAVE_PKTINFO is not defined (FreeBSD)
	  was using a pointer to a pointer as the destination of a memcpy and a
	  '&' instead of '*' in the sizeof.

	  ASTERISK-26138 #close

	  Change-Id: Id4927ff256c0e470bdf7bcfc025146a2f656e708

2016-06-20 13:21 +0000 [b6bd97eea2]  Mark Michelson <mmichelson@digium.com>

	* Fix Alembic upgrades.

	  A non-existent constraint was being referenced in the upgrade script.
	  This patch corrects the problem by removing the reference.

	  In addition, the head of the alembic branch referred to a non-existent
	  revision. This has been fixed by referring to the proper revision.

	  This patch fixes another realtime problem as well. Our Alembic scripts
	  store booleans as yes or no values. However, Sorcery tries to insert
	  "true" or "false" instead. This patch introduces a new boolean type that
	  translates to "yes" or "no" instead.

	  ASTERISK-26128 #close

	  Change-Id: I51574736a881189de695a824883a18d66a52dcef

2016-06-22 10:51 +0000 [3b4f5d1345]  gtjoseph <gjoseph@digium.com>

	* test_res_pjsip_scheduler: Add 'depends' on pjproject in MODULEINFO

	  Since the file was missing the depends on pjproject, it wasn't
	  picking up the pjproject related include path.  If there was no
	  system installed pjproject and pjproject-bundled was used, a compile
	  would fail because pjsip.h wasn't found.

	  ASTERISK-26139 #close

	  Change-Id: I2ee64a999051452bc198c4e2c168c70769cd3757

2016-06-22 10:55 +0000 [5f23aacda4]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid obsolete warning with AC_FUNC_SETVBUF_REVERSED on autoconf.

	  Removed the obsolete macro AC_FUNC_SETVBUF_REVERSED because Asterisk does not
	  support the platform SVR2 from the year 1987 anymore.

	  ASTERISK-26046

	  Change-Id: I28161b037feb2d29ab46ed20e785928460226c22

2016-06-21 06:52 +0000 [804005d251]  Torrey Searle <torrey@voxbone.com>

	* res_rtp_asterisk: fix memory leak in dtls

	  ensure that cert bios get freed after creating the fingerprint

	  ASTERISK-26129 #close

	  Change-Id: I44d23aea07dce80176ca1ff877c5ace9452ef451

2016-06-21 17:42 +0000 [f572b26495]  Richard Mudgett <rmudgett@digium.com>

	* res_pjproject.c: Replace inlined DEBUG_ATLEAST() with macro.

	  Change-Id: I8799fb0a347ad76e747dafd0eacf1ea1086b9a8c

2016-06-12 11:19 +0000 [b57cd01404]  gtjoseph <gjoseph@digium.com>

	* res_pjsip_pubsub: Address SEGV when attempting to terminate a subscription

	  Occasionally under load we'll attempt to send a final NOTIFY on a
	  subscription that's already been terminated and a SEGV will occur
	  down in pjproject's evsub_destroy function.  This is a result of a
	  race condition between all the paths that can generate a notify
	  and/or destroy the underlying pjproject evsub object:

	   * The client can send a SUBSCRIBE with Expires: 0.
	   * The client can send a SUBSCRIBE/refresh.
	   * The subscription timer can expire.
	   * An extension state can change.
	   * An MWI event can be generated.
	   * The pjproject transaction timer (timer_b) can expire.

	  Normally when our pubsub_on_evsub_state is called with a terminate,
	  we push a task to the serializer and return at which point the dialog
	  is unlocked.  This is usually not a problem because the task runs
	  immediately and locks the dialog again.  When the system is heavily
	  loaded though, there may be a delay between the unlock and relock
	  during which another event may occur such as the subscription timer
	  or timer_b expiring, an extension state change, etc.  These may also
	  cause a terminate to be processed and if so, we could cause pjproject
	  to try to destroy the evsub structure twice.  There's no way for us to
	  tell that the evsub was already destroyed and the evsub's group lock
	  can't tolerate this and SEGVs.

	  The remedy is twofold.

	   * A patch has been submitted to Teluu and added to the bundled
	     pjproject which adds add/decrement operations on evsub's group lock.

	   * In res_pjsip_pubsub:
	     * configure.ac and pjproject-bundled's configure.m4 were updated
	       to check for the new evsub group lock APIs.
	     * We now add a reference to the evsub group lock when we create
	       the subscription and remove the reference when we clean up the
	       subscription.  This prevents evsub from being destroyed before
	       we're done with it.
	     * A state has been added to the subscription tree structure so
	       termination progress can be tracked through the asyncronous tasks.
	     * The pubsub_on_evsub_state callback has been split so it's not doing
	       double duty.  It now only handles the final cleanup of the
	       subscription tree.  pubsub_on_rx_refresh now handles both client
	       refreshes and client terminates.  It was always being called for
	       both anyway.
	     * The serialized_on_server_timeout task was removed since
	       serialized_pubsub_on_rx_refresh was almost identical.
	     * Missing state checks and ao2_cleanups were added.
	     * Some debug levels were adjusted to make seeing only off-nominal
	       things at level 1 and nominal or progress things at level 2+.

	  ASTERISK-26099 #close
	  Reported-by: Ross Beer.

	  Change-Id: I779d11802cf672a51392e62a74a1216596075ba1

2016-06-21 07:05 +0000 [6eb0354f2d]  Alexander Traud <pabstraud@compuserve.com>

	* res_rtp_asterisk: Use latest DTLS version available by underlying platform.

	  Do not use DTLSv1_method() but DTLS_method() when available in OpenSSL of the
	  underlying platform. This change enables DTLS 1.2 since OpenSSL 1.0.2, for
	  WebRTC (DTLS-SRTP via SIP-over-WebSockets). This change enables AEAD-based
	  cipher-suites.

	  ASTERISK-26130 #close

	  Change-Id: I41f24448d6d2953e8bdb97c9f4a6bc8a8f055fd0

2016-06-21 10:53 +0000 [596d0b0bc3]  Scott Griepentrog <scott@griepentrog.com>

	* PJSIP: provide transport type with received messages

	  The receipt of a SIP MESSAGE may occur over any transport including TCP
	  and TLS. When the message is received, the original URI is added to the
	  message in the field PJSIP_RECVADDR, but this is insufficient to ensure
	  a reply message can reach the originating endpoint. This patch adds the
	  PJSIP_TRANSPORT field populated with the transport type.

	  ASTERISK-26132 #close

	  Change-Id: I28c4b1e40d573a056c81deb213ecf53e968f725e

2016-06-21 08:01 +0000 [9e222efbf2]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid obsolete warning with HELP_STRING on autoconf.

	  Some configure scripts used both AC_HELP_STRING and its replacement
	  AS_HELP_STRING. For consistency and to avoid obsolete warnings, those were
	  changed to AS_HELP_STRING.

	  ASTERISK-26046

	  Change-Id: I8aad4fd2bdee40aa2a31ce3339a1eb33ff4f5b0f

2016-06-20 10:29 +0000 [e94aae00a7]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Handle race condition at shutdown with timer.

	  When shutting down res_pjsip_session will get unloaded before res_pjsip.
	  The act of unloading unregisters all the PJSIP services and sets
	  their module IDs to -1. In some cases it is possible for a timer to
	  occur after this happens which calls into res_pjsip_session. The
	  res_pjsip_session module can then try to get the session from the
	  INVITE session using the module ID. Since the module ID is now -1
	  this fails.

	  This change stores a copy of the module ID and uses it for the timer
	  callback scenario. If the module ID is -1 the callback immediately
	  returns but if the module ID is valid then it continues as normal.

	  This works as the original ID of the module is guaranteed to still
	  be valid when used with the INVITE session.

	  ASTERISK-26127 #close

	  Change-Id: I88df72525c4e9ef9f19c13aedddd3ac4a335c573

2016-06-20 12:13 +0000 [0a30008224]  Richard Mudgett <rmudgett@digium.com>

	* app_voicemail.c: Fix IMAP compile error.

	  Fix compile error introduced by the patch for
	  ASTERISK-26045

	  Change-Id: I5b02876266f2824f4cec2b54d6ff4db5de5778d3

2016-06-17 13:51 +0000 [820ed3d4b3]  Alexei Gradinari <alex2grad@gmail.com>

	* fix: memory leaks, resource leaks, out of bounds and bugs

	  ASTERISK-26119 #close

	  Change-Id: Iecbf7d0f360a021147344c4e83ab242fd1e7512c

2016-06-13 17:40 +0000 [11caa10cf5]  Mark Michelson <mmichelson@digium.com>

	* ARI: Ensure announcer channels are destroyed.

	  Announcer channels were not being destroyed because the
	  stasis_app_control structure that referenced them was not being
	  destroyed. The control structure was not being destroyed because it was
	  not being unlinked from its container. It was not being unlinked from
	  its container because the after bridge callback for the announcer
	  channel was not being run. The after bridge callback was not being run
	  because the after bridge datastore was not being removed from the
	  channel on destruction. The channel was not being destroyed because the
	  hangup that used to destroy the channel was now only reducing the
	  reference count to one. The reference count of the channel was only
	  being reduced to one because the stasis_app_control structure was
	  holding the final reference...

	  The control structure used to not keep a reference to the channel, so
	  that loop described above did not happen.

	  The solution is to manually remove the control structure from its
	  container when the playback on a bridge is complete.

	  ASTERISK-26083 #close
	  Reported by Joshua Colp

	  Change-Id: I0ddc0f64484ea0016245800b409b567dfe85cfb4

2016-06-20 08:05 +0000 [f72ffc1ff9]  Alexander Traud <pabstraud@compuserve.com>

	* http: leverage 'bindaddr' for TLS in http.conf

	  The internal HTTP/WebSocket server supports both TCP and TLS, which can be
	  activated separately via the file http.conf. The source code intends to re-use
	  the TCP parameter 'bindaddr' for TLS, even if 'tlsbindaddr' is not specified
	  explicitly. This did not work because of a typo. This change resolves this typo.

	  ASTERISK-26126 #close

	  Change-Id: I5efb0409ae12044dfb3495b6b97b6d40a8c9c51f

2016-05-18 17:37 +0000 [3c80f84cd0]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_transport_management.c: Misc cleanups to survive shutdown.

	  * In unload_module(), reordered destroying things to minimize the window
	  that the global transports container could be used by other threads on
	  shutdown.  When shutting down you need to stop things in the opposite
	  order of creation.

	  * Put the global transports container into an AO2_GLOBAL_OBJ_STATIC to
	  eliminate the crash potential by other threads using the container on
	  shutdown.

	  * Made struct monitored_transport.sip_received not use
	  ast_atomic_fetchadd_int() since it is used as a boolean value that is only
	  set TRUE.  It was previously incremented for every received SIP message
	  and could theoretically overflow.

	  * In monitored_transport_state_callback(), allocated the monitored
	  transport object without a lock since the lock was unused.

	  * In keepalive_global_loaded(), removed releasing the transports container
	  if the keepalive_thread could not be started.  I set it up to be tried
	  again if the user reloads the configuration.

	  Change-Id: I8d12d16ef564290fa6d25a32334bb5ce8fdf87ff

2016-01-05 19:08 +0000 [7c59f2126f]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Add check that timer actually got scheduled.

	  Change-Id: Iabaa2e5dccf0762c258101ea0eb1487cf6959ad1

2016-06-13 13:33 +0000 [51cc5c31c4]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_multicast.c: Fix warning message typo.

	  Change-Id: Ic9928208b9957e09866abe3d9649030942ec52b3

2016-02-11 18:15 +0000 [3d0632a9c2]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Reorganize ast_sip_session_terminate().

	  Change-Id: I68a2128bcba4830985d2d441e70dfd1ac5bd712b

2016-06-08 06:15 +0000 [ac683f13c9]  Alexander Traud <pabstraud@compuserve.com>

	* core: Not the configured but granted number of possible file descriptors.

	  With CLI "core show settings", simply the parameter maxfiles of the file
	  asterisk.conf was shown. If that parameter was not set, nothing was displayed
	  although the environment might have set a default number itself. Or if maxfiles
	  were not granted (completely), still maxfiles was shown. Now, the maximum number
	  of possible file descriptors in the environment is shown.

	  ASTERISK-26097

	  Change-Id: I2df5c58863b5007b34b77adbe28b885dfcdf7e0b

2016-06-10 10:39 +0000 [4eb8cf2684]  Joshua Colp <jcolp@digium.com>

	* translate: Enables native Packet-Loss Concealment (PLC) for supporting codecs.

	  This reverts commit 5bfef2a8b4674382f959b21a3b8e14cf1d942bab as it
	  caused fax test failures.

	  ASTERISK-25629

	  Change-Id: I79de974dc4f63a1cafe0d2509169fd9a6b3cbaf4

2016-06-08 06:05 +0000 [0bf1a53db3]  Alexander Traud <pabstraud@compuserve.com>

	* astfd: With RLIMIT_NOFILE only the current value is sensible.

	  With menuselect "DEBUG_FD_LEAKS" and CLI "core show fd", both the maximum max
	  and current max of possible file descriptors were shown. Both show the same
	  value always. Not to confuse users, just the current maximum is shown now.

	  ASTERISK-26097

	  Change-Id: I49cf7952d73aec9e3f6a88942842c39be18380fa

2016-06-07 18:45 +0000 [d338343dac]  Joshua Colp <jcolp@digium.com>

	* cel: Ensure only one dial status per channel exists.

	  CEL wrongly assumed that a channel would only have a single dial
	  event on it. This is incorrect. Particularly in a queue each
	  call attempt to a member will result in a dial event, adding
	  a new dial status in CEL without removing the old one. This
	  would cause the container to grow with only one dial status
	  being removed when the channel went away. The other dial status
	  entries would remain leaking memory.

	  This change fixes the memory leak by ensuring that only one dial
	  status will only ever exist for each channel.

	  The behavior during the scenario where multiple events are received
	  has also been improved. For failure cases the first failure will
	  be the dial status. If an answer dial status is received, though,
	  it will take priority and the dial status for the channel will be
	  answer.

	  Memory usage has also been decreased by storing the minimal
	  amount of information and the code has been cleaned up slightly.

	  ASTERISK-25262 #close

	  Change-Id: I5944eb923db17b6a0faa7317ff6abc9307c009fe

2016-06-01 13:48 +0000 [1fd3a7849e]  Mark Michelson <mmichelson@digium.com>

	* ARI: Ensure proper channel state on operations.

	  ARI was recently outfitted with operations to create and dial channels.
	  This leads to the ability to try funny stuff. You could create a channel
	  and then immediately try to play back media on it. You could create a
	  channel, dial it, and while it is ringing attempt to make it continue in
	  the dialplan.

	  This commit attempts to fix this by adding a channel state check to
	  operations that should not be able to operate on outbound channels that
	  have not yet answered. If a channel is in an invalid state, we will send
	  a 412 response.

	  ASTERISK-26047 #close
	  Reported by Mark Michelson

	  Change-Id: I2ca51bf9ef2b44a1dc5a73f2d2de35c62c37dfd8

2016-06-08 11:27 +0000 [10019dc70c]  Mark Michelson <mmichelson@digium.com>

	* test_http_media_cache: Fix failing test.

	  The retrieve_cache_control_directives test has been failing occasionally
	  in Jenkins. The apparent failure occurs when attempting to validate the
	  expiration of the retrieved file.

	  After reproducing, the problem was pretty clear. At the beginning of the
	  test, the current time is retrieved. The seconds value of this timestamp
	  is X. When the file is retrieved, res_http_media_cache calculates the
	  expiration and in doing so retrieves the current time. In most cases,
	  since the test executes quickly, it will also retrieve a timestamp with
	  X seconds. However, if the test starts very near to when the timestamp
	  seconds are set to increment, res_http_media_cache may retrieve a
	  timestamp with X+1 seconds instead.

	  The test attempted to account for this by allowing a tolerance of 1
	  second when validating the expiration. However, the problem was that the
	  comparisons being used in the validation used > and < operations. This
	  meant that values that fell within the tolerance (because they equaled
	  the upper bound of the tolerance) would fail.

	  The solution is to use >= and <= operators in the expiration validation.

	  However, I estimated that while the one second tolerance should be
	  fine on most machines, it would still be possible on a very slow machine
	  to end up falling outside the one second tolerance. So I have also
	  relaxed the tolerance of expiration validation to be three seconds
	  instead.

	  The final change here is to add a debug message when validating
	  expiration so that we can see what values are being compared.

	  ASTERISK-25959 #close
	  Reported by Joshua Colp

	  Change-Id: Ic1a0e10722c1c5d276d5a4d6a67136d6ec26c247

2016-06-03 01:20 +0000 [56bdf048d2]  Timo Teräs <timo.teras@iki.fi>

	* Add support for OGG/Speex file format

	  ASTERISK-18995 #close

	  Change-Id: I98518bd28fc8f95668b3fe27d2cab45045ff3f7a

2016-06-09 10:33 +0000 [f0855358a6]  gtjoseph <gjoseph@digium.com>

	* cdr.c: Remove assert in base_process_dial_end

	  Scenario: Caller blonde transfer
	  Bob calls Charlie who answers.
	  Bob puts Charlie on hold and calls Alice.
	  Before Alice answers, Bob transfers Charlie to Alice.

	  Charlie's channel triggers an assert because he gets an "ANSWERED"
	  event even though he never dialed anything. With recent changes to dial
	  events, this is now a valid scenario so the assert needed to be removed.

	  ASTERISK-26103 #close

	  Change-Id: I2679b517b696e7952ab7fb29403df9140e7d1de2

2016-06-09 10:37 +0000 [cdb7edbe7b]  Mark Michelson <mmichelson@digium.com>

	* chan_pjsip: Lock channel when checking for RTP changes.

	  bridge_native_rtp can call into an RTP-capable channel driver in order
	  for the driver to update information about who the channel is
	  communicating with. For SIP channel drivers, this means deactivating
	  RTCP and sending a reinvite so that the endpoints can communicate
	  directly.

	  bridge_native_rtp does the right thing and has the channel locked when
	  calling into the channel driver. chan_pjsip can't alter session
	  properties in this thread, though. chan_pjsip queues a task on the
	  session serializer in order to update properties there.

	  The problem is that this queued task was not locking the channel. This
	  meant that the queued task could attempt to deactivate RTCP at the same
	  time that the channel thread was attempting to process an incoming RTCP
	  packet. This could lead to a crash.

	  This patch fixes the issue by locking the channel in the queued task
	  when altering RTP properties.

	  ASTERISK-26092 #close
	  Reported by Niklas Larsson

	  Change-Id: I3464e226a3c41f6b915f97891e07fa1599e2a159

2016-06-03 22:44 +0000 [04ec9c745e]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_registrar.c: Eliminate rx REGISTER request race condition.

	  This patch fixes a race condition processing received REGISTER requests
	  and their retransmissions caused by REGISTER requests being processed by
	  two threads.  The "sip_transaction Unable to register REGISTER transaction
	  (key exists)" message is a notable symptom of this issue.

	  This issue was more likely to happen before the pjsip/distributor
	  serializers were created.  Instead of steps one and two below placing the
	  REGISTER messages into the same pjsip/distributor they were placed in
	  random pjsip/default serializers.

	  1) REGISTER requests come in and get placed on the pjsip/distributor
	  serializer.

	  2) Before the first request is processed a retransmission comes in and is
	  placed on the same pjsip/distributor serializer.

	  3) The first request goes up the pjsip stack and is then shunted off to
	  the pjsip/aor/<aor> serializer.

	  4) Before the first request is completed processing in the pjsip/aor/<aor>
	  serializer, the second request goes up the pjsip stack and is also shunted
	  off to the pjsip/aor/<aor> serializer.

	  5) The first request completes processing and sends out its response.

	  6) The second request completes processing and tries to send out its
	  response but pjlib complains that the REGISTER transaction key already
	  exists.

	  7) Sadness ensues.

	  * The race is eliminated by removing the pjsip/aor/<aor> serializer and
	  continuing the processing in the pjsip/distributor serializer.  Now any
	  retransmissions queued in the pjsip/distributor serializer will be
	  processed after the first message is completely processed.

	  ASTERISK-26088 #close
	  Reported by:  Richard Mudgett

	  Change-Id: I842d714346088bf717ea27437f1dd85bff0bab5a

2016-06-03 11:35 +0000 [dcfef53ee2]  Richard Mudgett <rmudgett@digium.com>

	* stasis: Add setting subscription congestion levels.

	  Stasis subscriptions and message routers create taskprocessors to process
	  the event messages.  API calls are needed to be able to set the congestion
	  levels of these taskprocessors for selected subscriptions and message
	  routers.

	  * Updated CDR, CEL, and manager's stasis subscription congestion levels
	  based upon stress testing.  Increased the congestion levels to reduce the
	  potential for bursty call setup/teardown activity from triggering the
	  taskprocessor overload alert.  CDRs in particular need an extra high
	  congestion level because they can take awhile to process the stasis
	  messages.

	  ASTERISK-26088
	  Reported by:  Richard Mudgett

	  Change-Id: Id0a716394b4eee746dd158acc63d703902450244

2016-06-02 18:19 +0000 [4879cd875c]  Richard Mudgett <rmudgett@digium.com>

	* sorcery: Add setting object type congestion levels.

	  Sorcery creates taskprocessors for object types to process object observer
	  callbacks.  An API call is needed to be able to set the congestion levels
	  of these taskprocessors for selected object types.

	  * Updated PJSIP's contact and contact_status sorcery object type observer
	  default congestion levels based upon stress testing.  Increased the
	  congestion levels to reduce the potential for bursty register/unregister
	  and subscribe/unsubscribe activity from triggering the taskprocessor
	  overload alert.

	  ASTERISK-26088
	  Reported by:  Richard Mudgett

	  Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6

2016-06-02 16:08 +0000 [2cd67d5b07]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessors: Implement high/low water mark alerts.

	  When taskprocessors get backed up, there is a good chance that we are
	  being overloaded and need to defer adding new work to the system.

	  * Implemented a high/low water alert mechanism for modules to check if the
	  system is being overloaded and take appropriate action.  When a
	  taskprocessor is created it has default congestion levels set.  A
	  taskprocessor can later have those congestion levels altered for specific
	  needs if stress testing shows that the taskprocessor is a symptom of
	  overloading or needs to handle bursty activity without triggering an
	  overload alert.

	  * Add CLI "core show taskprocessor" low/high water columns.

	  * Fixed __allocate_taskprocessor() to not use RAII_VAR().  RAII_VAR() was
	  never a good thing to use when creating a taskprocessor because of the
	  nature of how its references needed to be cleaned up on a partial
	  creation.

	  * Made res_pjsip's distributor check if the taskprocessor overload alert
	  is active before placing a message representing brand new work onto a
	  distributor serializer.

	  ASTERISK-26088
	  Reported by:  Richard Mudgett

	  Change-Id: I182f1be603529cd665958661c4c05ff9901825fa

2016-05-27 17:31 +0000 [c966a035e0]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session: Use distributor serializer for incoming calls.

	  We must continue using the serializer that the original INVITE came in on
	  for the dialog.  There may be retransmissions already enqueued in the
	  original serializer that can result in reentrancy and message sequencing
	  problems.

	  Outgoing call legs create the pjsip/outsess/<endpoint> serializers for
	  their dialogs.

	  ASTERISK-26088
	  Reported by:  Richard Mudgett

	  Change-Id: I24d7948749c582b8045d5389ba3f6588508adbbc

2016-05-27 16:28 +0000 [5b7b16a87f]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Recreate subscriptions using distributor serializer.

	  * Resolves potential reentrancy problems if system restarted in the middle
	  of subscription message transactions.

	  * Fixes memory leak recreating persistent subscriptions when the
	  subscription resource tree could not be created.

	  ASTERISK-26088
	  Reported by:  Richard Mudgett

	  Change-Id: I71e34d7ae8ed35a694f1030e820e2548c48697be

2016-05-27 12:50 +0000 [c2ae49249c]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Use distributor serializer for incoming subscriptions.

	  We must continue using the serializer that the original SUBSCRIBE came in
	  on for the dialog.  There may be retransmissions already enqueued in the
	  original serializer that can result in reentrancy and message sequencing
	  problems.  The "sip_transaction Unable to register SUBSCRIBE transaction
	  (key exists)" message is a notable symptom of this issue.

	  Outgoing subscriptions still create the pjsip/pubsub/<endpoint>
	  serializers for their dialogs.

	  ASTERISK-26088
	  Reported by:  Richard Mudgett

	  Change-Id: I18b00bb74a56747b2c8c29543a82440b110bf0b0

2016-05-26 17:35 +0000 [2ff26e9746]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_distributor.c: Consistently pick a serializer for messages.

	  Incoming messages that are not part of a dialog or a recognized response
	  to one of our requests need to be sent to a consistent serializer.  Under
	  load we may be queueing retransmissions before we can process the original
	  message.  We don't need to throw these messages onto random serializers
	  and cause reentrancy and message sequencing problems.

	  * Created a pool of pjsip/distributor serializers that get picked by
	  hashing the call-id and remote tag strings of the received messages.

	  * Made ast_sip_destroy_distributor() destroy items in the reverse order of
	  creation.

	  ASTERISK-26088
	  Reported by:  Richard Mudgett

	  Change-Id: I2ce769389fc060d9f379977f559026fbcb632407

2016-06-02 12:51 +0000 [df2791da8f]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_distributor.c: Ignore messages until fully booted.

	  We should not be processing any incoming messages until we are fully
	  booted.  We may not have dialplan or other needed configuration loaded
	  yet.

	  ASTERISK-26089 #close
	  Reported by: Scott Griepentrog

	  ASTERISK-26088
	  Reported by:  Richard Mudgett

	  Change-Id: I584aefb4f34b885a8927e1f13a2c64babd606264

2016-06-09 09:20 +0000 [d21a77b325]  gtjoseph <gjoseph@digium.com>

	* build:  Fix ast_sockaddr initialization to be more portable

	  A change to glibc 2.22 changed the order of the sockadddr_storage
	  members which caused the places where we do an initialization of
	  ast_sockaddr with '{ { 0, 0, } }' to fail compilation.  Those
	  initializers (which we shouldn't have been using anyway) have been
	  replaced with memsets.

	  Change-Id: Idd1b3b320903d8771bfe221f0b015685de628fa4

2016-06-03 00:59 +0000 [72d190eb69]  Timo Teräs <timo.teras@iki.fi>

	* Detect and use proper libraries for musl toolchains

	  Change-Id: I8d9b212f70813404b82918a3f99439e500d4bfcb

2016-06-03 00:57 +0000 [39b69ab537]  Timo Teräs <timo.teras@iki.fi>

	* Fixes to include signal.h

	  POSIX defines signal.h. sys/signal.h should not be used as it is
	  c-library internal header which may or may not exist. Notably with
	  musl it generates warning of being incorrect.

	  Change-Id: Ia56b0aa1d84b5c590114867b1b384a624f39a6fc

2016-06-08 12:26 +0000 [7f5ca67e5f]  Matt Jordan <mjordan@digium.com>

	* res_hep_{pjsip|rtcp}: Decline module loads if res_hep had not loaded

	  A crash can occur in res_hep_pjsip or res_hep_rtcp if res_hep has not
	  loaded and does not have a configuration file. Previously when this
	  occurred, checks were put in to see if the configuration was loaded
	  successfully. While this is a good idea - and has been added to the
	  offending function in res_hep - the reality is res_hep_pjsip and
	  res_hep_rtcp have no business running if res_hep isn't also running.

	  As such, this patch also adds a function to res_hep that returns whether
	  or not it successfully loaded. Oddly enough, ast_module_check returns
	  "everything is peachy" even if a module declined its load - so it cannot
	  be solely relied on. res_hep_pjsip and res_hep_rtcp now also check this
	  function to see if they should continue to load; if it fails, they
	  decline their load as well.

	  ASTERISK-26096 #close

	  Change-Id: I007e535fcc2e51c2ca48534f48c5fc2ac38935ea

2016-06-08 02:11 +0000 [784c18128b]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: No rtpmap for static RTP payload IDs in SDP.

	  This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
	  SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
	  UDP, if many codecs are allowed in Asterisk. This new feature is enabled
	  together with the optional feature compactheaders=yes via the file sip.conf.

	  ASTERISK-25578 #close

	  Change-Id: I16491b1937862de26f84fa0ffe679a6bab925044

2016-06-02 12:04 +0000 [31a5c28339]  Joshua Colp <jcolp@digium.com>

	* res_odbc: Implement a connection pool.

	  Testing has shown that our usage of UnixODBC is problematic
	  due to bugs within UnixODBC itself as well as the heavy weight
	  cost of connecting and disconnecting database connections, even
	  when pooling is enabled.

	  For users of UnixODBC 2.3.1 and earlier crashes would occur due
	  to insufficient protection of the disconnect operation. This was
	  fixed in UnixODBC 2.3.2 and above.

	  For users of UnixODBC 2.3.3 and higher a slow-down would occur
	  under heavy database use due to repeated connection establishment.
	  A regression is present where on each connection the database
	  configuration is cached again, with the cache growing out of
	  control.

	  The connection pool implementation present in this change helps
	  to mitigate these issues by reducing how much we connect and
	  disconnect database connections. We also solve the issue of
	  crashes under UnixODBC 2.3.1 by defaulting the maximum number of
	  connections to 1, returning us to the previous working behavior.
	  For users who may have a fixed version the maximum concurrent
	  connection limit can be increased helping with performance.

	  The connection pool works by keeping a list of active connections.
	  If the connection limit has not been reached a new connection is
	  established. If the connection limit has been reached then the
	  request waits until a connection becomes available before
	  continuing.

	  ASTERISK-26074 #close
	  ASTERISK-26054 #close

	  Change-Id: I6774bf4bac49a0b30242c76a09c403d2e856ecff

2016-05-31 09:10 +0000 [80ff7912a1]  Vasil Kolev <vasil.kolev@securax.org>

	* chan_sip: bigger buffers for headers, better failure mode

	  Currently chan_sip can give weird messages if the contacts don't
	  fit in the From: or To: headers. This fix changes the from,to and
	  invite variables to use ast_str, allocates and deallocates them and
	  resizes them if needed.

	  ASTERISK-26069 #close

	  Change-Id: I1b68fcbddca6f6cc7d7a92fe1cb0d5430282b2b3

2016-06-06 11:13 +0000 [60caebc738]  Örn Arnarson <orn@arnarson.net>

	* apps/app_voicemail.c and main/say.c: Add support for Icelandic language

	  Icelandic has some weird grammar rules when dealing with dates and
	  numbers. There are different genders used depending on which number
	  you're dealing with, and only a handful of numbers do change depending
	  on the gender. There is also an implied gender in several cases.

	  This patch was originally written for asterisk 1.6, and has been in use
	  for several years without crashes. I cleaned it up a bit and rewrote
	  what was necessary for Asterisk 13.

	  The functions were copied from other similar languages and modified
	  where appropriate. If i recall correctly, the German and Danish
	  functions were used as a base.

	  ASTERISK-26087
	  Reported by: Örn Arnarson
	  Tested by: Örn Arnarson

	  Change-Id: Ib7d8bd7b0fede5767921ed821315b5b508c0e665

2016-06-07 05:45 +0000 [52120204c9]  Alexander Traud <pabstraud@compuserve.com>

	* res_srtp: Instead of libSRTP use OpenSSL as random source.

	  Since libSRTP 1.5, its Random Number Generator (RNG) is not maintained anymore.
	  Therefore, the symbol RAND_bytes is used instead of crypto_get_random.

	  ASTERISK-24436 #close

	  Change-Id: Iea0bae4d4e3c9aa0926ea442b6484b5159789d96

2016-06-07 02:16 +0000 [da943ec5c0]  Alexander Traud <pabstraud@compuserve.com>

	* BuildSystem: Avoid 'ar cru' and use 'ar cr' instead.

	  In several internal library projects, the files are archived with the help of
	  'ar cr'. Only the projects editline and the Objective Open H.323 stack
	  implementation in C (ooh323c) use 'ar cru' instead. Recently, some platforms
	  changed the default parameters of AR which creates "/usr/bin/ar: `u' modifier
	  ignored since `D' is the default (see `U')". For consistency and to avoid this
	  message all projects use 'ar cr' now.

	  ASTERISK-26091 #close

	  Change-Id: I710a9b1c01c1b5a1931a646098c044c8161ead40

2016-06-01 16:57 +0000 [dca052e531]  Richard Mudgett <rmudgett@digium.com>

	* chan_rtp.c: Simplify options to UnicastRTP channel creation.

	  Change the awkward and not as flexible UnicastRTP options format
	  From:
	  Dial(UnicastRTP/127.0.0.1[/[<engine>][/[<codec>]]])
	  To:
	  Dial(UnicastRTP/127.0.0.1[/[<options>]])

	  Where <options> can be standard Asterisk flag options:
	  c(<codec>) - Specify which codec/format to use such as 'ulaw'.
	  e(<engine>) - Specify which RTP engine to use such as 'asterisk'.

	  More option flags can be easily added later such as the codec's RTP
	  payload type to use when the codec does not have a static payload type
	  defined.

	  Change-Id: I0c297aaf09e2ee515536cb7437bb8042ff8ff3c9

2016-05-02 05:57 +0000 [5bfef2a8b4]  Jaco Kroon <jaco@uls.co.za>

	* translate: Enables native Packet-Loss Concealment (PLC) for supporting codecs.

	  ASTERISK-25629 #close

	  Change-Id: Ibfcf0670e094e9718d82fd9920f1fb2dae122006

2016-05-25 10:34 +0000 [3e8d523d88]  Alexei Gradinari <alex2grad@gmail.com>

	* core/dial: New channel variable FORWARDERNAME

	  Added a new channel variable FORWARDERNAME which indicates which
	  channel was responsible for a forwarding requests received on dial attempt.

	  Fixed a bug in the app_queue: FORWARD_CONTEXT is not used.

	  ASTERISK-26059 #close

	  Change-Id: I34e93e8c1b5e17776a77b319703c48c8ca48e7b2

2016-05-27 14:49 +0000 [a2f820e8dc]  gtjoseph <gjoseph@digium.com>

	* ari/resource_channels:  Add 'formats' to channel create/originate

	  If you create a local channel and don't specify an originator channel
	  to take capabilities from, we automatically add all audio formats to
	  the new channel's capabilities. When we try to make the channel
	  compatible with another, the "best format" functions pick the best
	  format available, which in this case will be slin192.  While this is
	  great for preserving quality, it's the worst for performance and
	  overkill for the vast majority of applications.

	  In the absense of any other information, adding all formats is the
	  correct thing to do and it's not always possible to supply an
	  originator so a new parameter 'formats' has been added to the channel
	  create/originate functions. It's just a comma separated list of formats
	  to make availalble for the channel. Example: "ulaw,slin,slin16".
	  'formats' and 'originator' are mutually exclusive.

	  To facilitate determination of format names, the format name has been
	  added to "core show codecs".

	  ASTERISK-26070 #close

	  Change-Id: I091b23ecd41c1b4128d85028209772ee139f604b

2016-06-03 01:33 +0000 [538c6415c6]  Timo Teräs <timo.teras@iki.fi>

	* chan_sip: Support auth username for callbackextension feature

	  ASTERISK-20527 #close

	  Change-Id: I659cf7f00836a09d09d146ad226a40477d731239

2016-06-03 00:39 +0000 [797695c5cc]  Timo Teräs <timo.teras@iki.fi>

	* Make use of GLOB_BRACE and GLOB_NOMAGIC optional

	  These flags are non-portable GNU extensions. Make their use
	  optional. This fixes complication error on e.g. musl c-library
	  based systems.

	  Change-Id: I0aa06efc62aa8995f091445c8b762a75a91042f3

2016-06-02 14:57 +0000 [3c1fec8099]  Timo Teräs <timo.teras@iki.fi>

	* Fix res_search usage

	  Resolver state is not part of res_search API. This fixes
	  compilation error:

	  dns.c:261:8: error: too many arguments to function 'res_search'
	    ret = res_search(&dns_state,

	  Change-Id: Ia600a58557040df83f744da3dde23225293845a5

2016-06-02 14:53 +0000 [9c1d95e873]  Timo Teräs <timo.teras@iki.fi>

	* Fix #include poll.h and sys/cdefs.h

	  POSIX defines poll.h, sys/poll.h should not be used at is c-library
	  internal header which may or may not exist. Notable in musl it
	  generates warning of being incorrect. And add explict include of
	  sys/cdefs.h where needed.

	  Change-Id: I142930df53fe7585a06b854b6faddc5301e024be

2016-05-25 08:45 +0000 [8a5c2e736c]  Niklas Larsson <niklas@tese.se>

	* core/manager: Add uptime field to FullyBooted

	  Add Uptime and LastReload to event FullyBooted.

	  ASTERISK-26058 #close
	  Reported by: Niklas Larsson

	  Change-Id: I909b330801c0990d78df9b272ab0adc95aecb15e

2016-06-02 04:59 +0000 [4505a59dc9]  Joshua Colp <jcolp@digium.com>

	* alembic: Fix migration.

	  The 81b01a191a46_pjsip_add_contact_reg_server.py script was attempting
	  to use UniqueConstraint and failing. It was not imported and after
	  importing it also continued to fail.

	  I've changed the script to use the explicit name of the constraint
	  instead.

	  Change-Id: I2438b0be90b7ce583b47dd27983c0c1a02cea5b9

2016-06-01 13:57 +0000 [40d19f2e55]  Richard Mudgett <rmudgett@digium.com>

	* logging,cdr,cel: Fix stringfield memory leak.

	  The stringfields refactor to allow adding stringfields to the end of a
	  structure (f6f4cf459f43f072604927209b39646f84aaa2e2) exposed some
	  incomplete cleanup code by some stringfield users.

	  The most noticeable leaker is the logging system where there is a leak for
	  every log message generated.

	  ASTERISK-26078 #close
	  Reported by:  Etienne Lessard
	  Patches:
	        jira_asterisk_26078_v13.patch (license #5621) patch uploaded
	        by Richard Mudgett

	  Change-Id: If6a08b31336b492c3de6f9dfd07c447f8d5a8782

2016-05-31 13:02 +0000 [aec7916595]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_distributor.c: Use correct rdata info access method (Part 2).

	  The pjproject doxygen for rdata->msg_info.info says to call
	  pjsip_rx_data_get_info() instead of accessing the struct member directly.
	  You need to call the function mostly because the function will generate
	  the struct member value if it is not already setup.

	  Change-Id: I4d519385a577f3e9d9193a88125e493cf17fa799

2016-05-09 15:00 +0000 [205a31f86c]  Mark Michelson <mmichelson@digium.com>

	* Expand the scope of Dial Events

	  Dial events up to this point have come in two flavors
	  * A Dial event with no status to indicate that dialing has begun
	  * A Dial event with a status to indicate that dialing has ended

	  With this change, Dial events have been expanded to also give
	  intermediate events, such as "RINGING", "PROCEEDING", and "PROGRESS".
	  This is especially useful for ARI dialing, as it gives the application
	  writer the opportunity to place a channel into an early bridge when
	  early media is detected.

	  AMI handles these in-progress dial events by sending a new event called
	  "DialState" that simply indicates that dial state has changed but has
	  not ended. ARI never distinguished between DialBegin and DialEnd, so no
	  change was made to the event itself.

	  Another change here relates to dial forwards. A forward-related event
	  was previously only sent when a channel was successfully able to forward
	  a call to a new channel. With this set of changes, if forwarding is
	  blocked, we send a Dial event with a forwarding destination but no
	  forwarding channel, since we were prevented from creating one. This is
	  again useful for ARI since application writers can now handle call
	  forward attempts from within their own application.

	  ASTERISK-25925 #close
	  Reported by Mark Michelson

	  Change-Id: I42cbec7730d84640a434d143a0d172a740995543

2016-05-30 19:27 +0000 [8a6a14590d]  gtjoseph <gjoseph@digium.com>

	* res_pjsip_mwi_body_generator:  Re-order the body items

	  Re-ordered the body items so Message-Account is second.

	  Messages-Waiting: no
	  Message-Account: sip:1571@<IP Removed>:5060
	  Voice-Message: 0/0 (0/0)

	  ASTERISK-26065 #close
	  Reported-by: Ross Beer

	  Change-Id: If5d35a64656eac98c2dd5e490cc0b2807bed80c3

2016-05-30 10:58 +0000 [7fa5766752]  gtjoseph <gjoseph@digium.com>

	* pjproject_bundled:  Move to pjproject 2.5

	  Although all the patches we had against 2.4.5 were applied by Teluu,
	  a new bug was introduced preventing re-use of tcp and tls transports
	  This patch removes all the previous patches against 2.4.5, updates
	  the version to 2.5, and adds a new patch to correct the transport
	  re-use problem.

	  Change-Id: I0dc6c438c3910f7887418a5832ca186aea23d068

2016-05-27 12:25 +0000 [b56f611856]  Rusty Newton <rnewton@digium.com>

	* res_pjsip: Add clarifying documentation to PJSIP_HEADER help text

	  Added notes about when you can read or write headers. Specifically
	  about being able to read on the inbound channel and write on an
	  outbound channel.

	  ASTERISK-26063 #close
	  Reported by: Private Name
	  Tested by: Rusty Newton

	  Change-Id: Ibeb64af17d1f6451028b3c29855a3f151a01d8c5

2016-05-26 15:14 +0000 [bb0f4a6310]  Mark Michelson <mmichelson@digium.com>

	* multicast RTP: Add dialing options

	  This adds a new parameter to the end of a multicast RTP dialing string.
	  This parameter defines the following options:

	  * i: Set the interface from which multicast RTP is sent
	  * l: Set whether multicast packets are looped back to the sender
	  * t: Set the TTL for multicast packets
	  * c: Set the codec to use for RTP

	  ASTERISK-26068 #close
	  Reported by Mark Michelson

	  Change-Id: I033b706b533f0aa635c342eb738e0bcefa07e219

2016-05-09 14:48 +0000 [88d997913f]  Mark Michelson <mmichelson@digium.com>

	* ARI: Re-implement the ARI dial command, allowing for early bridging.

	  ARI dial had been implemented using the Dial API. This made great sense
	  when dialing was 100% separate from bridging. However, if a channel were
	  to be added to a bridge during the dial attempt, there would be a
	  conflict between the dialing thread and the bridging thread. Each would
	  be attempting to read frames from the dialed channel and act on them.

	  The initial attempt to make the two play nice was to have the Dial API
	  suspend the channel in the bridge and stay in charge of the channel
	  until the dial was complete. The problem with this was that it was
	  riddled with potential race conditions. It also was not well-suited for
	  the case where the channel changed which bridge it was in during the
	  dial.

	  This new approach removes the use of the Dial API altogether. Instead,
	  the channel we are dialing is placed into an invisible ARI dialing
	  bridge. The bridge channel thread handles incoming frames from the
	  channel. If the channel is added to a real bridge, it is departed from
	  the invisible bridge and then added to the real bridge. Similarly, if
	  the channel is removed from the real bridge, it is automatically added
	  back to the invisible bridge if the dial attempt is still active.

	  This approach keeps the threading simple by always having the channel
	  being handled by bridge channel threads.

	  ASTERISK-25925

	  Change-Id: I7750359ddf45fcd45eaec749c5b3822de4a8ddbb

2016-05-19 14:56 +0000 [31f17abe44]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: add "via_addr", "via_port", "call_id" to contact

	  As res_pjsip_nat rewrites contact's address, only the last Via header
	  can contain the source address of registered endpoint.
	  Also Call-Id header may contain the source address of registered
	  endpoint.

	  Added "via_addr", "via_port", "call_id" to contact.
	  Added new fields ViaAddress, CallID to AMI event ContactStatus.

	  ASTERISK-26011

	  Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576

2016-05-24 16:56 +0000 [574c9e77eb]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: chatty verbose messages

	  There are a lot of verbose messages about Endpoint and Contact status
	  changes if there are many dynamic endpoints.
	  The patch sets verbose level 2 for Endpoint status changes
	  and verbose level 3 for Contact status changes.

	  ASTERISK-26055 #close

	  Change-Id: Ie64e261ddbbc41bfff0f0190241152cc123fe6d7

2016-05-20 13:56 +0000 [b3142e99e4]  Alexei Gradinari <alex2grad@gmail.com>

	* app_voicemail: fix bugs, imap mm_status log change to debug

	  Fixed some bugs:
	  - create dirpath when save downloading message from IMAP storage.
	  - create IMAP folder if not exists when saving to IMAP storage
	  - check if file successfully opened before write to it
	  - some IMAP checks
	  - remove non-standard flag 'Unseen'
	  etc

	  Change to debug IMAP mm_status log instead of verbose.

	  Remove unused X-Asterisk-VM-Caller-channel message header
	  for security reason. The clients should not know name of peer/endpoint.

	  ASTERISK-26045 #close

	  Change-Id: I7f83d88b69b36934e2539c114b9fb612deed971b

2016-05-25 18:30 +0000 [7d44d12816]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_distributor.c: Use correct rdata info access method.

	  The pjproject doxygen for rdata->msg_info.info says to call
	  pjsip_rx_data_get_info() instead of accessing the struct member directly.
	  You need to call the function mostly because the function will generate
	  the struct member value if it is not already setup.

	  Change-Id: Iafe8b01242b7deb0ebfdc36685e21374a43936d2

2016-05-03 11:11 +0000 [1d60bfcdf1]  Tzafrir Cohen <tzafrir@debian.org>

	* followme: allow disabling callee prompt

	  Add the option 'enable_callee_prompt' to followme.conf. Enabled by
	  default. If disabled, a callee is not prompted to accept or reject
	  the forwarded call.

	  ASTERISK-26064 #close

	  Change-Id: I0a8b19d4cf95c86a07c992813babb9e4a4acfff5
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2016-02-12 09:59 +0000 [80ff2c2540]  Corey Farrell <git@cfware.com>

	* threadpool: Fix potential data race.

	  worker_start checked for ZOMBIE status without holding a lock.  All
	  other read/write of worker status are performed with a lock, so this
	  check should do the same.

	  ASTERISK-25777 #close

	  Change-Id: I5e33685a5c26fdb300851989a3b82be8c4e03781

2016-05-24 05:28 +0000 [070eab6ed2]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_outbound_publish: Ensure publish is valid when explicitly destroying.

	  Recent changes to res_pjsip_outbound_publish have introduced a
	  race condition at shutdown where an outbound publish may be shutdown
	  twice. In this case the first succeeds as a result of the unpublish.
	  In the second invocation since it's been unpublished a task is
	  queued to just destroy the client. This task holds no ref to the
	  publish and as a result the publish may be destroyed before the
	  task is run, causing a crash.

	  This explicit destruction task now holds a reference to the publish
	  to ensure it remains valid.

	  ASTERISK-26053 #close

	  Change-Id: I10789b98add3e50292ee3b33a55a1d9061cec94b

2016-05-09 14:27 +0000 [f6c33771f6]  Mark Michelson <mmichelson@digium.com>

	* Bridging: introduce "invisible" bridges.

	  Invisible bridges function the same as normal bridges, but they have the
	  following restrictions:

	  * They never show up in CLI, AMI, or ARI queries.
	  * They do not have Stasis messages published about them.

	  Invisible bridges' main use is for when use of the bridging system is
	  desired, but the bridge should not be known to users of the Asterisk
	  system.

	  ASTERISK-25925

	  Change-Id: I804a209d3181d7c54e3d61a60eb462e7ce0e3670

2016-05-22 11:03 +0000 [85d0272e76]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Only check transaction on transaction state events.

	  The send request callback function currently assumes that it
	  will only ever be called on transaction state changes. This is
	  not always true. If our own timer callback occurs we will call
	  the callback with a timer event instead of a transaction state
	  change event. In this case the transaction on the event is
	  invalid and accessing it will result in a crash.

	  ASTERISK-26049 #close

	  Change-Id: I623211c8533eb73056b0250b4580b49ad4174dfc

2016-05-21 05:42 +0000 [31897d2d99]  Jesper (License 5518)

	* func_curl: Don't trim response text on non-ASCII characters

	  The characters 0x80-0xFF were trimmed as well as 0x00-0x20 because of
	  a signed comparison.

	  ASTERISK-25669 #close
	  Reported by: Jesper
	  patches:
	    strings.curl.trim.patch submitted by Jesper (License 5518)

	  Change-Id: Ia51e169f24e3252a7ebbaab3728630138ec6f60a

2016-05-20 19:03 +0000 [2a77af9ed0]  Richard Mudgett <rmudgett@digium.com>

	* chan_rtp.c: Cleanup ast_request() parameter parsing.

	  * Fixed NULL crash potential if parameters are missing.

	  * Reordered some operations so further diagnostic messages can be
	  more helpful.

	  Change-Id: Ibbdc67a2496508cbfbfef0cf19c35177ae2fbd70

2016-05-20 16:59 +0000 [ade5275a3e]  Richard Mudgett <rmudgett@digium.com>

	* parking.h: Update ast_parking_park_call() doxygen to reality.

	  ASTERISK-26029

	  Change-Id: I2db14d102a48d3224010e6d1c69e856373cc1260

2016-05-12 15:18 +0000 [c378b00a83]  Alexei Gradinari <alex2grad@gmail.com>

	* func_odbc: single database connection should be optional

	  func_odbc was changed in Asterisk 13.9.0
	  to make func_odbc use a single database connection per DSN
	  because of reported bug ASTERISK-25938
	  with MySQL/MariaDB LAST_INSERT_ID().

	  This is drawback in performance when func_odbc is used
	  very often in dialplan.

	  Single database connection should be optional.

	  ASTERISK-26010

	  Change-Id: I7091783a7150252de8eeb455115bd00514dfe843

2016-05-20 09:39 +0000 [1c02b19b79]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Match dialogs on responses better.

	  When receiving an incoming response to a dialog-starting INVITE, we were
	  not matching the response to the INVITE dialog. Since we had not
	  recorded the to-tag to the dialog structure, the PJSIP-provided method
	  to find the dialog did not match.

	  Most of the time, this was not a problem, because there is a fall-back
	  that makes the response get routed to the same serializer that the
	  request was sent on. However, in cases where an asynchronous DNS lookup
	  occurs in the PJSIP core, the thread that sends the INVITE is not
	  actually a threadpool serializer thread. This means we are unable to
	  record a serializer to handle the incoming response.

	  Now, imagine what happens when an INVITE is sent on a non-serialized
	  thread, and an error response (such as a 486) arrives. The 486 ends up
	  getting put on some random threadpool thread. Eventually, a hangup task
	  gets queued on the INVITE dialog serializer. Since the 486 is being
	  handled on a different thread, the hangup task can execute at the same
	  time that the 486 is being handled. The hangup task assumes that it is
	  the sole owner of the INVITE session and channel, so it ends up
	  potentially freeing the channel and NULLing the session's channel
	  pointer. The thread handling the 486 can crash as a result.

	  This change has the incoming response match the INVITE transaction, and
	  then get the dialog from that transaction. It's the same method we had
	  been using for matching incoming CANCEL requests. By doing this, we get
	  the INVITE dialog and can ensure that the 486 response ends up being
	  handled by the same thread as the hangup, ensuring that the hangup runs
	  after the 486 has been completely handled.

	  ASTERISK-25941 #close
	  Reported by Javier Riveros

	  Change-Id: I0d4cc5d07e2a8d03e9db704d34bdef2ba60794a0

2016-05-18 06:19 +0000 [e773e3a9bb]  Matt Jordan <mjordan@digium.com>

	* ARI: Add the ability to download the media associated with a stored recording

	  This patch adds a new feature to ARI that allows a client to download
	  the media associated with a stored recording. The new route is
	  /recordings/stored/{name}/file, and transmits the underlying binary file
	  using Asterisk's HTTP server's underlying file transfer facilities.

	  Because this REST route returns non-JSON, a few small enhancements had
	  to be made to the Python Swagger generation code, as well as the
	  mustache templates that generate the ARI bindings.

	  ASTERISK-26042 #close

	  Change-Id: I49ec5c4afdec30bb665d9c977ab423b5387e0181

2016-05-19 11:41 +0000 [40cb032009]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_astdb: Filter fields to only the registered ones.

	  This change introduces the same filtering that is done in res_sorcery_realtime
	  to the res_sorcery_astdb module. This allows persisted sorcery objects
	  that may contain unknown fields to still be read in from the AstDB
	  and used. This is particularly useful when switching between different
	  versions of Asterisk that may have introduced additional fields.

	  ASTERISK-26014 #close

	  Change-Id: Ib655130485a3ccfd635b7ed5546010ca14690fb2

2016-05-09 21:40 +0000 [9766a12b4c]  snuffy <snuffy22@gmail.com>

	* res_pjsip_empty_info: Respond to empty SIP INFO packets

	  Some SBCs require responses to empty SIP INFO packets
	  after establishing call via INVITE, if not responded to
	  they may drop your call after unspecified timeout of X minutes.

	  They are identified by having no Content-Type, check for this
	  and respond with 200 - OK message.

	  ASTERISK-24986 #close
	  Reported-by: Ilya Trikoz, Federico Santulli

	  Change-Id: Ib27e4f07151e5aef28fa587e4ead36c5b87c43e0

2016-05-18 10:58 +0000 [111c4b0324]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: remove OSARCH check for init install

	  There are more specific checks for the platform.

	  Specifically this allows installing OS/X init scripts.

	  ASTERISK-26038 #close

	  Change-Id: If08933621145b10362a0cfe73c079301d9c13f50
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2016-05-10 11:28 +0000 [d4b77dad1b]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_exten_state: Use the extension for publishing to.

	  This change uses the newly added multi-user support for
	  outbound publish to publish to the specific user that an
	  extension state change is for.

	  This also extends the res_pjsip_outbound_publish support
	  to include the user specific From and To URI information in
	  the outbound publishing of extension state. Since the URI
	  is used when constructing the body it is important to ensure
	  that the correct local and remote URIs are used.

	  Finally the max string growths for the dialog-info+xml
	  body generator has been increased as through testing it has
	  proven to be too conservative.

	  ASTERISK-25965

	  Change-Id: I668fdf697b1e171d4c7e6f282b2e1590f8356ca1

2016-05-03 16:07 +0000 [3905997bae]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_publish: Add multi-user support per configuration

	  Added a new multi_user option that when specified allows a particular
	  configuration to be used for multiple users. It does this by replacing
	  the user portion of the server uri with a dynamically created one.

	  Two new API calls have been added in order to make use of the new
	  functionality:

	  ast_sip_publish_user_send - Sends an outgoing publish message based on the
	  given user. If state for the user already exists it uses that, otherwise
	  it dynamically creates new outbound publishing state for the user at that
	  time.

	  ast_sip_publish_user_remove - Removes all outbound publish state objects
	  associated with the user. This essentially stops outbound publishing for
	  the user.

	  ASTERISK-25965 #close

	  Change-Id: Ib88dde024cc83c916424645d4f5bb84a0fa936cc

2016-05-18 07:54 +0000 [6e5e84458f]  gtjoseph <gjoseph@digium.com>

	* udptl:  Don't eat sequence numbers until OK is received

	  Scenario:
	  Local fax -> Asterisk w/ firewall -> Provider -> Remote fax

	  * Local fax starts rtp call to remote fax
	  * Remote fax starts t38 call back to local fax.
	  * Local fax sends t38 no-signal to Asterisk before sending an OK.
	  * udptl processes the frame and increments the expected sequence number.
	  * chan_sip drops the frame because the call isn't up so nothing goes out
	    the external interface to open the port for incoming packets.
	  * Local fax sends OK and Asterisk sends OK to the remote fax.
	  * Remote fax sends t38 packets which are dropped by the firewall.
	  * Local fax re-sends t38 no-signal with the same sequence number.
	  * udptl drops the frame because it thinks it's a dup.
	  * Still no outgoing packets to open the firewall.
	  * t38 negotiation fails.

	  The patch drops frames t38 received before udptl sequence processing
	  when the call hasn't been answered yet.  The second no-signal frame
	  is then seen as new and is relayed out the external interface which
	  opens the port and allows negotiation to continue.

	  ASTERISK-26034 #close

	  Change-Id: I11744b39748bd2ecbbe8ea84cdb4f3c5943c5af9

2016-05-15 12:22 +0000 [52148d93f4]  Matt Jordan <mjordan@digium.com>

	* CHANGES: Update formatting of items

	  * Provide consistent indenting of lines in bulleted paragraphs
	  * Respect the 80 character column width
	  * Group all like items together, e.g., all dialplan applications under
	    "Applications", etc.
	  * Use a single blank line to break up functionality changes within a
	    larger section
	  * Use two blanks lines to delineate larger sections

	  Change-Id: I0488554f5cb7c51da70003d69288a21c9aab9647

2016-04-18 18:17 +0000 [03d88b5656]  Matt Jordan <mjordan@digium.com>

	* ARI: Add the ability to play multiple media URIs in a single operation

	  Many ARI applications will want to play multiple media files in a row to
	  a resource. The most common use case is when building long-ish IVR prompts
	  made up of multiple, smaller sound files. Today, that requires building a
	  small state machine, listening for each PlaybackFinished event, and triggering
	  the next sound file to play. While not especially challenging, it is tedious
	  work. Since requiring developers to write tedious code to do normal activities
	  stinks, this patch adds the ability to play back a list of media files to a
	  resource.

	  Each of the 'play' operations on supported resources (channels and bridges)
	  now accepts a comma delineated list of media URIs to play. A single Playback
	  resource is created as a handle to the entire list. The operation of playing
	  a list is identical to playing a single media URI, save that a new event,
	  PlaybackContinuing, is raised instead of a PlaybackFinished for each non-final
	  media URI. When the entire list is finished being played, a PlaybackFinished
	  event is raised.

	  In order to help inform applications where they are in the list playback, the
	  Playback resource now includes a new, optional attribute, 'next_media_uri',
	  that contains the next URI in the list to be played.

	  It's important to note the following:
	   - If an offset is provided to the 'play' operations, it only applies to the
	     first media URI, as it would be weird to skip n seconds forward in every
	     media resource.
	   - Operations that control the position of the media only affect the current
	     media being played. For example, once a media resource in the list
	     completes, a 'reverse' operation on a subsequent media resource will not
	     start a previously completed media resource at the appropiate offset.
	   - This patch does not add any new operations to control the list. Hopefully,
	     user feedback and/or future patches would add that if people want it.

	  ASTERISK-26022 #close

	  Change-Id: Ie1ea5356573447b8f51f2e7964915ea01792f16f

2016-05-17 11:14 +0000 [5bd1bf2816]  gtjoseph <gjoseph@digium.com>

	* chan_sip:  Prevent extra Session-Expires headers from being added

	  When chan_sip does a re-INVITE to refresh a session and authentication
	  is required, the INVITE with the Authorization header containes a
	  second Session-Expires header without the ";refersher=" parameter.
	  This is causing some proxies to return a 400.  Also, when Asterisk is
	  the uas and the refresher, it is including the Session-Expires and
	  Min-SE headers in OPTIONS messages which is not allowed per RFC4028.

	  This patch (based on the reporter's) Checks to see if a Session-Expires
	  header is already in the message before adding another one.  It also
	  checks that the method is INVITE or UPDATE.

	  ASTERISK-26030 #close

	  Change-Id: I58a7b07bab5a3177748d8a7034fb8ad8e11ce1d9

2016-05-16 15:29 +0000 [ae81b55361]  gtjoseph <gjoseph@digium.com>

	* res_pjsip_outbound_registration:  Clean up state when registration is deleted

	  Nothing was cleaning up the registration state object when ast_sorcery_delete
	  was called on a registration.  So, the registration was deleted from sorcery
	  but the state object went right on refreshing the registration (or failing
	  to refresh the registration) with the peer.

	  * Added a 'deleted' observer on registration that removes the state object.

	  ASTERISK-25964 #close
	  Reported-by Matt Jordan

	  Change-Id: I2db792145cdb1f72ebbf57dd9099596dbbf12c23

2016-05-15 19:05 +0000 [8b5cee4a4f]  gtjoseph <gjoseph@digium.com>

	* res_pjsip:  Set TCP_NODELAY on TCP transports

	  Although it's perfectly legal to place multiple SIP messages in the same packet,
	  it can cause problems because the Linux default is to enable Path MTU Discovery
	  which sets the Don't Fragment bit on the packets. If adding a second message to
	  the packet causes the MTU to be exceeded, and the destination isn't equipped to
	  send a FRAGMENTATION NEEDED response to a large packet, the packet will just be
	  dropped.

	  We can't specifically tell the stack to send only 1 message per packet, but we
	  can turn on TCP_NODELAY when we create the transport. This will at least tell
	  the stack to send packets as soon as possible.

	  ASTERISK-26005 #close
	  Reported-by: Ross Beer

	  Change-Id: I820f23227183f2416ca5e393bec510e8fe1c8fbd

2016-05-14 07:24 +0000 [3522376512]  Matt Jordan <mjordan@digium.com>

	* logger: Support JSON logging with Verbose messages

	  When 2d7a4a3357 was merged, it missed the fact that Verbose log messages
	  are formatted and handled by 'verbosers'. Verbosers are registered
	  functions that handle verbose messages only; they exist as a separate
	  class of callbacks. This was done to handle the 'magic' that must be
	  inserted into Verbose messages sent to remote consoles, so that the
	  consoles can format the messages correctly, i.e., the leading
	  tabs/characters.

	  In reality, verbosers are a weird appendage: they're a separate class of
	  formatters/message handlers outside of what handles all other log
	  messages in Asterisk. After some code inspection, it became clear that
	  simply passing a Verbose message along with its 'sublevel' importance
	  through the normal logging mechanisms removes the need for verbosers
	  altogether.

	  This patch removes the verbosers, and makes the default log formatter
	  aware that, if the log channel is a console log, it should simply insert
	  the 'verbose magic' into the log messages itself. This allows the
	  console handlers to interpret and format the verbose message
	  themselves.

	  This simplifies the code quite a lot, and should improve the performance
	  of printing verbose messages by a reasonable factor:
	  (1) It removes a number of memory allocations that were done on each
	      verobse message
	  (2) It removes the need to strip the verbose magic out of the verbose
	      log messages before passing them to non-console log channels
	  (3) It now performs fewer iterations over lists when handling verbose
	      messages

	  Since verbose messages are now handled like other log messages (for the
	  most part), the JSON formatting of the messages works as well.

	  ASTERISK-25425

	  Change-Id: I21bf23f0a1e489b5102f8a035fe8871552ce4f96

2016-05-14 21:48 +0000 [a1803cb5f4]  Matt Jordan <mjordan@digium.com>

	* configs/samples/pjsip.conf.sample: Fix typo

	  A ':' is not a valid token for starting a comment.

	  Change-Id: I123592d93a83d1bdde3e352822881eb9da85e5ad

2016-05-12 07:08 +0000 [d29c17834c]  Matt Jordan <mjordan@digium.com>

	* res/res_hep_pjsip: Fix reported local IP address when bound to 'any'

	  When bound to an 'any' address, e.g., 0.0.0.0, PJSIP reports as its
	  local address the 'any' address, as opposed to the IP address we
	  actually received the packet on. This can cause some confusion in Homer,
	  as it will dutifully report what we send it.

	  This patch uses the PJSIP inspection routines to determine which IP
	  address we probably received the packet on based on the remote party's
	  IP address. In the event that this fails, it falls back to the IP
	  address natively reported by the transport.

	  Change-Id: I076f835d2aef489e1ee1d01595b211eb2ce62da3

2016-05-14 12:29 +0000 [14938184a3]  Sean Bright <sean.bright@gmail.com>

	* res_ari: Correct Location headers returned by some ARI resources

	  The Location headers returned by:

	   * /bridges/{bridgeId}/play
	   * /bridges/{bridgeId}/record
	   * /channels/{channelId}/play
	   * /channels/{channelId}/record

	  Did not have the '/ari' prefix, and in the case of the 'play' resources, were
	  using 'playback' instead of 'playbacks.'

	  Change-Id: I957c58a3a1471bf477dae7c67faa1b74fcd9241c

2016-05-11 20:17 +0000 [e06a23681c]  Matt Jordan <mjordan@digium.com>

	* res_hep: Provide an option to pick the UUID type

	  At one point in time, it seemed like a good idea to use the Asterisk
	  channel name as the HEP correlation UUID. In particular, it felt like
	  this would be a useful identifier to tie PJSIP messages and RTCP
	  messages together, along with whatever other data we may eventually send
	  to Homer. This also had the benefit of keeping the correlation UUID
	  channel technology agnostic.

	  In practice, it isn't as useful as hoped, for two reasons:
	  1) The first INVITE request received doesn't have a channel. As a
	     result, there is always an 'odd message out', leading it to be
	     potentially uncorrelated in Homer.
	  2) Other systems sending capture packets (Kamailio) use the SIP Call-ID.
	     This causes RTCP information to be uncorrelated to the SIP message
	     traffic seen by those capture nodes.

	  In order to support both (in case someone is trying to use res_hep_rtcp
	  with a non-PJSIP channel), this patch adds a new option, uuid_type, with
	  two valid values - 'call-id' and 'channel'. The uuid_type option is used
	  by a module to determine the preferred UUID type. When available, that
	  source of a correlation UUID is used; when not, the more readily available
	  source is used.

	  For res_hep_pjsip:
	   - uuid_type = call-id: the module uses the SIP Call-ID header value
	   - uuid_type = channel: the module uses the channel name if available,
	                          falling back to SIP Call-ID if not
	  For res_hep_rtcp:
	   - uuid_type = call-id: the module uses the SIP Call-ID header if the
	                          channel type is PJSIP and we have a channel,
	                          falling back to the Stasis event provided
	                          channel name if not
	   - uuid_type = channel: the module uses the channel name

	  ASTERISK-25352 #close

	  Change-Id: Ide67e59a52d9c806e3cc0a797ea1a4b88a00122c

2016-05-13 11:46 +0000 [69a85a519f]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: Endpoint IP Access Controls

	  With the old SIP module we can use IP access controls per peer.
	  PJSIP module missing this feature.

	  This patch added next configuration Endpoint options:
	      "acl" - list of IP ACL section names in acl.conf
	      "deny" - List of IP addresses to deny access from
	      "permit" - List of IP addresses to permit access from
	      "contact_acl" - List of Contact ACL section names in acl.conf
	      "contact_deny" - List of Contact header addresses to deny
	      "contact_permit" - List of Contact header addresses to permit

	  This patch also better logging failed request:
	      add custom message instead of "No matching endpoint found"
	      add SIP method to logging

	  ASTERISK-25900

	  Change-Id: I456dea3909d929d413864fb347d28578415ebf02

2016-05-12 14:36 +0000 [fd3f70598d]  Mark Michelson <mmichelson@digium.com>

	* Use doubles instead of floats for conversions when comparing strings.

	  In 13.9.0, there was an issue where PJSIP contacts added to an AOR would
	  be deleted at seemingly random times.

	  One reason this was happening was because of an operation to retrieve
	  the contacts whose expiration time was less than or equal to the current
	  time. When retrieving existing contacts, the contact's expiration time
	  and the current time were converted from a string to a float, and those
	  two floats were compared.

	  On some systems, including mine, this conversion was horribly off. For
	  instance, I could regularly see the string "1463079214" get converted
	  into 1463079168.000000. When switching from using a float to using a
	  double, the conversion was as expected.

	  Why was the conversion to float off? My best guess is that the
	  conversion to float was attempting to store the entire value in the 23
	  bit significand of the IEEE-754 floating point number. In particular, if
	  you take only the 23 most significant bits of 1463079214, you get the
	  messed up 1463079168 that we were seeing in the conversion. It likely
	  was possible to get a more precise value by composing the number using
	  an exponent, but the conversion did not work that way. With a double,
	  you have a 52 bit significand, allowing the entire value to fit there,
	  and thereby allowing an accurate conversion.

	  ASTERISK-26007 #close
	  Reported by Greg Siemon

	  Change-Id: I83ca7944aae8b7cd994b254c78ec02411d321070

2016-05-12 09:13 +0000 [4f8cfa0220]  gtjoseph <gjoseph@digium.com>

	* pjsip_distributor:  Add missing newline to NOTICE

	  There was a newline missing from the end of the "no matching endpoint" notice.

	  Change-Id: Idc11fe5bc0354072291663dbffe648c471e39181

2016-05-10 10:19 +0000 [d14d1ba826]  Sebastian Damm <damm@sipgate.de>

	* res_pjsip_outbound_registration: generate correct Contact URI for TLS

	  There are two types of SIP URIs indicating a secure transport:
	  * sips:user@example.org
	  * sip:user@example.org;transport=tls

	  When using a sips URI, Asterisk checks incoming INVITEs and answers from
	  the other side for sips URIs, and rejects the packet if there are only
	  sip URIs. So Asterisk should only generate a sips Contact URI if the
	  other side supports it.

	  This patch makes Asterisk generate either a sip or sips Contact URI
	  depending on the format of the server URI.

	  If you want a sip URI, use:
	  server_uri=sip:example.org\;transport=tls

	  If you want a sips URI, use:
	  server_uri=sips:example.org

	  ASTERISK-25990 #close
	  Reported-by: Sebastian Damm

	  Change-Id: I5ae57d6531ce940b5fc64d5cd2673e60db0f9ba2

2016-05-05 16:41 +0000 [9f996624b0]  Alexei Gradinari <alex2grad@gmail.com>

	* logger: Add PID to syslog messages.

	  During refactoring of this support the addition of
	  the PID to messages was removed. This change adds it
	  back in.

	  ASTERISK-25538 #close

	  Change-Id: Ie2d43b0652e59b7ac319a7dba94501540d70ba36

2016-05-11 14:07 +0000 [5236ffed97]  Matt Jordan <mjordan@digium.com>

	* configure: Fix errors with AST_UNDEFINED_SANITIZER/AST_LEAK_SANITIZER

	  When running on a system that does not support or use AST_UNDEFINED_SANITIZER
	  or AST_LEAK_SANITIZER, the configure script would incorrectly set those
	  constants to a blank value, e.g., 'AST_UNDEFINED_SANITIZER='. This would
	  cause menuselect to error out, complaining that a blank value is not a
	  valid option. This patch corrects the issue by setting the value to 0 if
	  the options that those constants enable/disable is not found.

	  Change-Id: Ib39814aaf940f308d500c1e026edb3d70de47fba

2016-05-10 08:17 +0000 [b5c471b339]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* followme: delete the right recorded name file

	  FollowMe with the option a records the name of the caller and plays it
	  to the callee. However it has failed to clean up that recorded file
	  as it tried to delete the file name without the '.sln' extension.

	  ASTERISK-26008 #close

	  Change-Id: I79d7b1be7d5cde57bf076d9389e2a8a4422776ec
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2016-05-10 03:10 +0000 [ec85ea3c21]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* basic-cfg: asterisk.conf: don't set languages

	  * No need to set language in a miniml configuration. 'en' will do just
	    fine.
	  * It would be useful to have an example of setting it to a different
	    language.
	  * Setting the documentation language explicitly is likewise not
	    required. Setting it to a different value is not common. At least
	    until there is a set of translated documentation.

	  Change-Id: I94d91ea34e129925f25af81ef8dc0906fb568cb7
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2016-05-10 03:08 +0000 [1b0a9bb2c4]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* basic-cfg: asterisk.conf: debug level 5 spams

	  Don't suggest users to use debug level 5, which spews (usually
	  non-useful) debug information. Reduce the suggestion to (an
	  arbitrarily-selected) level 2.

	  Change-Id: Ib53195f78945970956ff59ef13fa89b90e0fcd60
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2016-05-10 03:06 +0000 [d0ba3e8196]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* basic-cfg: asterisk.conf: defaults of options

	  Note the default of remmed-out options. To clarify that those values are
	  not the defaults.

	  Change-Id: I849c29b7a710f0abc37355fcb5bfee335ae30738
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2016-05-10 02:56 +0000 [f943a1fd84]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* basic-cfg: asterisk.conf: remove [directories]

	  A minimal configuration does not need to explicitly spell out the
	  directories. The built-in defaults will do just fine. In many cases
	  they are wrong.

	  Change-Id: Id1a671e5c5e9923765a4156b57f9f7e263fdd26c
	  Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

2016-05-05 11:37 +0000 [1e876d6915]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_authenticator_digest: Don't use source port in nonce verification

	  From the issue reporter:
	  "res_pjsip_outbound_authenticator_digest builds a nonce that is a hash of
	  the timestamp, the source address, the source port, a server UUID that is
	  calculated at startup, and the authentication realm.

	  Rather than caching nonces that we create, we instead attempt to re-calculate
	  the nonce when receiving an incoming request with authentication. We then
	  compare the re-calculated nonce to the incoming nonce, and if they don't match,
	  then authentication has failed early.

	  The problem is that it is possible, especially when using TCP, to receive two
	  requests from the same endpoint but have differing source ports for those
	  requests. Asterisk itself commonly will use different source ports for
	  outbound TCP requests."

	  This patch removes the source port dependency when building the nonce.

	  ASTERISK-25978 #close

	  Change-Id: I871b5f4adce102df1c4988066283095ec509dffe

2016-05-07 14:39 +0000 [dfefbf8731]  gtjoseph <gjoseph@digium.com>

	* config_transport:  Tell pjproject to allow all SSL/TLS protocols

	  The default tls settings for pjproject only allow TLS 1, TLS 1.1 and TLS 1.2.
	  SSL is not allowed.   So, even if you specify "sslv3" for a transport method,
	  it's silently ignored and one of the TLS protocols is used.  This was a new
	  behavior of pjsip_tls_setting_default() in 2.4 (when tls.proto was added) that
	  we never caught.

	  Now we need to set tls.proto = 0 after we call pjsip_tls_setting_default().
	  This tells pjproject to set the socket protocol to match the method.

	  ASTERISK-26004 #close

	  Change-Id: Icfb55c1ebe921298dedb4b1a1d3bdc3ca41dd078

2016-05-05 09:14 +0000 [d03e170ae7]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: Use common datastores container API.

	  This migrates res_pjsip_pubsub over to using the newly
	  introduce common datastores management API instead of using
	  its own implementations for both subscriptions and
	  publications.

	  As well the extension state data now provides a generic
	  datastores container instead of a subscription. This allows
	  the dialog-info+xml body generator to work for both
	  subscriptions and publications.

	  ASTERISK-25999 #close

	  Change-Id: I773f9e4f35092da0f653566736a8647e8cfebef1

2016-05-05 09:12 +0000 [94cd351ec4]  Joshua Colp <jcolp@digium.com>

	* datastore: Add common container based datastores API.

	  This change introduces a common container based datastores
	  management API. This has been done in a few places across
	  the tree but this consolidates all of the logic into one
	  place in a generic fashion.

	  ASTERISK-25999

	  Change-Id: I72eb15941dcdbc2a37bb00a33ce00f8755bd336a

2016-05-04 02:40 +0000 [8923c9ac96]  Jaco Kroon <jaco@uls.co.za>

	* app_confbridge: Add a regcontext option for confbridge bridge profiles.

	  This patch allows for having app_confbridge register the name of the
	  conference as an extension into a specific context, similar to
	  regcontext for chan_sip.  This variant is not quite as involved as the
	  one in chan_sip and doesn't allow for multiple contexts or custom
	  extensions, you can only specify the context and the conference name
	  will always be used as the extension to register.

	  ASTERISK-25989 #close

	  Change-Id: Icacf94d9f2b5dfd31ef36f6cb702392619a7902f

2016-05-08 20:19 +0000 [facce6f632]  gtjoseph <gjoseph@digium.com>

	* pjproject_bundled:  Check for python-dev and TEST_FRAMEWORK

	  The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set.
	  The python bindings are now built only if TEST_FRAMEWORK is set and a
	  python development package is installed.

	  libresample was also disabled.

	  ASTERISK-25993 #close
	  Reported-by: Joshua Colp

	  Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03

2016-05-06 11:54 +0000 [322c3b4262]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: module load priority

	  The res_pjsip_authenticator_digest, res_pjsip_endpoint_identifier_*
	  and res_pjsip_registrar modules should load ASAP
	  to avoid "No matching endpoint found" for legitimate endpoint.

	  ASTERISK-25994

	  Change-Id: Iac95d95ad031e0be104189d29e923a2ad7c24a1b

2016-05-05 15:16 +0000 [516f49f316]  Alexei Gradinari <alex2grad@gmail.com>

	* stasis_endpoints: Add new Status and Headers to ContactStatus

	  ASTERISK-25903 added a new headers to AMI Event ContactStatusDetail.
	  ASTERISK-25904 added a new Status to AMI Event ContactStatusDetail.
	  These additions should be also in stasis_endpoints
	  to include in command "manager show event ContactStatus"

	  Change-Id: I7610ad02a998e1f26c20caa27aa50279d0164f6a

2016-05-03 15:43 +0000 [64e058f75a]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_publish: state potential dropped on reloads/realtime fetches

	  When reloading, or fetching realtime data, if the "apply" failed for any
	  numerous reasons the current state object would not be maintained. This
	  potentially resulted in publishes being stopped for some states/clients when
	  they should not have been.

	  This patch makes it so the current state object is kept upon any type of reload/
	  fetch failures.

	  Change-Id: Iab6020c116d628ed2ae81183e987e2eaa3c90b30

2016-05-03 15:35 +0000 [adc82a2260]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_publishing: After unloading the library won't load again

	  The same thing was happening in res_pjsip_publish_asterisk. When the library
	  was unloaded it did not unregister the object type from sorcery. Subsequent
	  loads resulted in a failed load due to the sorcery type already existing.

	  Change-Id: Ifdc25e94e4cd40bc5a19eb4d0a00b86c2e9fedc9

2016-05-03 15:39 +0000 [3b0ce5169d]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_publish: Won't unload if condition wait times out

	  When res_pjsip_outbound_publish unloads it has to wait for all current
	  publishing objects to get done. However if the wait condition times out
	  then it does not fail the unload. This sometimes results in an infinite
	  loop check while unloading. This patch now fails the unload operation if
	  the condition times out.

	  Change-Id: Id57b8cbed9d61222690fcba1e4f18e259df4c7ec

2016-05-03 14:59 +0000 [41fccbfeb1]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_publish: Ref leak in off nominal callback paths

	  There were a few spots where the client object's reference was being leaked in
	  sip_outbound_publish_callback. This patch cleans up those leaks.

	  Change-Id: I485d0bc9335090f373026f77c548042e258461df

2016-05-03 15:31 +0000 [dfbb03cc8e]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_publish: Potential crash due to off nominal path

	  It was possible for the explicit publish destroy function to be called without
	  the pjsip client ever being initialized. This fix checks to make sure there is
	  a client to destroy before attempting.

	  Change-Id: I8eea1bfa3bd472149bfc255310be2a6248688f5c

2016-05-05 05:07 +0000 [17b6ba49ef]  Joshua Colp <jcolp@digium.com>

	* file: Ensure nativeformats remains valid for lifetime of use.

	  It is possible for the nativeformats of a channel to change
	  throughout its lifetime. As a result a user of it needs to either
	  ensure the channel is locked when accessing the formats or keep
	  a reference to the nativeformats themselves.

	  This change fixes the file playback support so it keeps a
	  reference to the nativeformats when accessing things.

	  ASTERISK-25998 #close

	  Change-Id: Ie45b65475e1481ddf05b874ee48f63e39fff8915

2016-04-15 09:32 +0000 [cc4c5f5693]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: improve realtime performance

	  This patch modified pjsip_options to retrieve only
	  permament contacts for aor if the qualify_frequency is > 0
	  and persisted contacts if the qualify_frequency is > 0.

	  This patch also fixed a bug in res_sorcery_astdb.
	  res_sorcery_astdb doesn't save object data retrived from astdb.

	  ASTERISK-25826

	  Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05

2016-05-02 16:52 +0000 [92f85fe766]  Alexei Gradinari <alex2grad@gmail.com>

	* res_fax/t38_gateway: Peer V.21 session is created on wrong channel

	  The channel and peer V.21 sessions are created on the same channel now.
	  The peer V.21 session should be created only on peer channel
	  when one of channel can handle T.38.

	  Also this patch enable debug for T.38 gateway session
	  if global fax debug enabled.

	  ASTERISK-25982

	  Change-Id: I78387156ea521a77eb0faf170179ddd37a50430e

2016-05-04 16:11 +0000 [4df48581f1]  Alexei Gradinari <alex2grad@gmail.com>

	* pjsip: Added "reg_server" to contacts (fixed alembic)

	  ASTERISK-25931

	  Change-Id: Icc4321a88f5c93ff809da3f372eebbf69c6a8549

2016-05-04 03:17 +0000 [02f4ca1079]  Chris Trobridge <christ.trobridge@ultra-aep.com>

	* config_options.c: Expand #ifdef to contain whole if statement.

	  ASTERISK-25956 #close

	  Change-Id: If6961ec54be276d5ab4f012ee7e7b420cb45de38

2016-05-02 16:08 +0000 [380ac201ac]  Alexei Gradinari <alex2grad@gmail.com>

	* res_fax: add FAXMODE variable

	  The app_fax set FAXMODE variable, but res_fax missing this feature.
	  This patch add FAXMODE variable which is set to either "audio" or "T38".

	  ASTERISK-25980

	  Change-Id: Ie3dcbfb72cc681e9e267a60202f7fb8723a51b6b

2016-05-02 05:56 +0000 [0c9faaee47]  Jean Aunis <jean.aunis@prescom.fr>

	* app_chanspy: fix audiohook options in non read-only mode

	  When option 'o' was not set, ChanSpy created its audiohook with the flag
	  AST_AUDIOHOOK_MUTE_WRITE, which caused ChanSpy to listen audio from one
	  direction only.

	  ASTERISK-25866 #close

	  Change-Id: I5c745855eea29a3fbc4e4aed0b0c0f53580535e0

2016-04-07 16:33 +0000 [a4cfcda036]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip/AMI: add contact.updated event

	  With the old SIP module AMI sends PeerStatus event on every
	  successfully REGISTER requests, ie, on start registration,
	  update registration and stop registration.

	  With PJSIP AMI sends ContactStatus only when status is changed.
	  Regarding registration:
	  on start registration - Created
	  on stop registration - Removed
	  but on update registration nothing

	  This patch added contact.updated event.

	  ASTERISK-25904

	  Change-Id: I8fad8aae9305481469c38d2146e1ba3a56d3108f

2016-04-30 17:52 +0000 [e61716b774]  gtjoseph <gjoseph@digium.com>

	* pjproject_bundled:  Various fixes discovered during testing of OSes

	  For all OSes:
	  * Disabled third-party codecs in pjproject and added
	    '--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the
	    configure options since we don't use the pjsip codec capability.

	  FreeBSD:
	  * Added FreeBSD support to install_prereq.
	  * Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make".
	  * Added __progname and environ to asterisk.exports.in.
	  * Reverted the use of ldconfig to create shared library symlinks to ln.
	  * Only enable epoll in pjproject if `uname -s` is Linux.
	  * Added a patch to pjproject to take the name of the 'make' command from
	    an environment variable if supplied.  This is needed for the python bindings.
	    (merged by Teluu into pjproject trunk 5/3/2016)
	  FreeBSD support isn't complete.  Still some general issues regarding
	  make/gmake having nothing to do with pjproject.  With some handholding it DOES
	  build successfully.

	  CentOS:
	  Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH.
	  CentOS 6/7 32/64 build and run the pjsip testsuite successfully.

	  Ubuntu:
	  No changes required.
	  Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully.

	  Debian:
	  No changes required.
	  Debian 6/7/8 32/64 build and run the pjsip testsuite successfully.

	  There will utimately be a follow-up patch to create an install_prereq for
	  the testsuite as I've discovered a few missing requirements.

	  ASTERISK-25968 #close

	  Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c

2016-03-17 14:29 +0000 [080c6216b6]  Andrew Nagy <andrew.nagy@the159.com>

	* app_voicemail: always copy dynamic struct to avoid race condition

	  Voicemail email addresses can be corrupt or voicemail
	  emails can end up being sent to the wrong email address if asterisk is
	  reading voicemail.conf during a reload and processing an email at the
	  same time. This patch always copies the struct that would otherwise only
	  be copied once.

	  ASTERISK-24463 #close
	  Reported by: John Campbell
	  Tested by: Etienne Lessard
	  Tested by: Andrew Nagy
	  Change-Id: I3a0643813116da84e2617291903d0d489b7425fb

2016-04-15 14:26 +0000 [2b1edee772]  Alexei Gradinari <alex2grad@gmail.com>

	* pjsip: Added "reg_server" to contacts.

	  If the Asterisk system name is set in asterisk.conf, it will be stored
	  into the "reg_server" field in the ps_contacts table to facilitate
	  multi-server setups.

	  ASTERISK-25931

	  Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8

2016-05-01 02:21 +0000 [bf13b59062]  Diederik de Groot <dkgroot@talon.nl>

	* configs/basic-pbx/asterisk.conf: contains incorrect path separator

	  Note: When packagers use these files (as an example) the paths are never
	  really used when they are split using '='.

	  Note: Thirdparty applications will also have trouble parsing the file when
	  expecting '=>'.

	  Change-Id: I0ada647f588e81f023fb1333ca15a1a333fd6004

2016-04-27 17:19 +0000 [2c46063d54]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_exten_state: Create PUBLISH messages.

	  Create PUBLISH messages to update a third party when an extension state
	  changes because of either a device or presence state change.

	  A configuration example:

	  [exten-state-publisher]
	  type=outbound-publish
	  server_uri=sip:instance1@172.16.10.2
	  event=presence
	  ; Optional regex for context filtering, if specified only extension state
	  ; for contexts matching the regex will cause a PUBLISH to be sent.
	  @context=^users
	  ; Optional regex for extension filtering, if specified only extension
	  ; state for extensions matching the regex will cause a PUBLISH to be sent.
	  @exten=^[0-9]*
	  ; Required body type for the PUBLISH message.
	  ;
	  ; Supported values are:
	  ; application/pidf+xml
	  ; application/xpidf+xml
	  ; application/cpim-pidf+xml
	  ; application/dialog-info+xml (Planned support but not yet)
	  @body=application/pidf+xml

	  The '@' extended variables are used because the implementation can't
	  extend the outbound publish type as it is provided by the outbound publish
	  module.  That means you either have to use extended variables, or
	  implement some sort of custom extended variable thing in the outbound
	  publish module.  Another option would be to refactor that stuff to have an
	  option which specifies the use of an alternate implementation's
	  configuration and then have that passed to the implementation.  JColp
	  opted for the extended variables method originally.

	  ASTERISK-25972 #close

	  Change-Id: Ic0dab4022f5cf59302129483ed38398764ee3cca

2016-04-26 16:10 +0000 [0b5292525c]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_exten_state: Check if body generator is available.

	  When starting the extension state publishers, check if the requested
	  message body generator is available.  If not available give error message
	  and skip starting that publisher.

	  * res_pjsip_pubsub.c: Create new API if type/subtype generator
	  registered.

	  * res_pjsip_exten_state.c: Use new body generator API for validation.

	  ASTERISK-25922

	  Change-Id: I4ad69200666e3cc909d4619e3c81042d7f9db25c

2016-04-28 11:35 +0000 [369182d084]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Start body generator users after suppliers.

	  Change-Id: I8f0b57841feaab56c8a4e821b5ccb4e05e5fbadb

2016-04-28 16:06 +0000 [3af83ea2fb]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Add useful information to some messages.

	  Change-Id: Ia0b2e15773894c599e5c5748bbc70e99f434192a

2016-04-26 15:58 +0000 [8e1b663b87]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Fix body generator registration race.

	  Change-Id: Id8752073ef06472a2fd96080f4009fac42843e67

2016-04-28 16:54 +0000 [30415944a8]  gtjoseph <gjoseph@digium.com>

	* pjproject_bundled:  Disable PJSIP_UNESCAPE_IN_PLACE

	  When pjsip_parse_uri is called with PJSIP_UNESCAPE_IN_PLACE enabled,
	  the input uri string will become corrupted if it contains escape sequences.
	  It's not possible to automatically strdup or strdupa the input string because
	  the output uri pj_str_t's will have pointers to chunks of the input string.
	  Getting around this would require more memory management code and wouldn't
	  be worth the savings of doing the unescape in place.

	  ASTERISK-25970 #close
	  Reported-by: Dmitriy Serov

	  Change-Id: I28dc0e599b5108f7959b9c46dc8278371b372f88

2016-04-26 15:13 +0000 [906ea2c43f]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.h: Fix doxygen association.

	  Change-Id: I110d3e3572598289fcd4215d966cf0c858f98632

2016-04-25 16:00 +0000 [76ea4cfaae]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_publish.c: Remove redundant flag check.

	  Change-Id: I0da80a3c3e0eae0c52ff27e7412ba027d6f52353

2016-03-07 18:34 +0000 [4ebf9a938d]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Add ability to identify by Authorization username

	  A feature of chan_sip that service providers relied upon was the ability to
	  identify by the Authorization username.  This is most often used when customers
	  have a PBX that needs to register rather than identify by IP address.  From my
	  own experiance, this is pretty common with small businesses who otherwise
	  don't need a static IP.

	  In this scenario, a register from the customer's PBX may succeed because From
	  will usually contain the PBXs account id but an INVITE will contain the caller
	  id.  With nothing recognizable in From, the service provider's Asterisk can
	  never match to an endpoint and the INVITE just stays unauthorized.

	  The fixes:

	  A new value "auth_username" has been added to endpoint/identify_by that
	  will use the username and digest fields in the Authorization header
	  instead of username and domain in the the From header to match an endpoint,
	  or the To header to match an aor.  This code as added to
	  res_pjsip_endpoint_identifier_user rather than creating a new module.

	  Although identify_by was always a comma-separated list, there was only
	  1 choice so order wasn't preserved.  So to keep the order, a vector was added
	  to the end of ast_sip_endpoint.  This is only used by res_pjsip_registrar
	  to find the aor.  The res_pjsip_endpoint_identifier_* modules are called in
	  globals/endpoint_identifier_order.

	  Along the way, the logic in res_pjsip_registrar was corrected to match
	  most-specific to least-specific as res_pjsip_endpoint_identifier_user does.

	  The order is:

	  username@domain
	  username@domain_alias
	  username

	  Auth by username does present 1 problem however, the first INVITE won't have
	  an Authorization header so the distributor, not finding a match on anything,
	  sends a securty_alert.  It still sends a 401 with a challenge so the next
	  INVITE will have the Authorization header and presumably succeed.  As a result
	  though, that first security alert is actually a false alarm.

	  To address this, a new feature has been added to pjsip_distributor that keeps
	  track of unidentified requests and only sends the security alert if a
	  configurable number of unidentified requests come from the same IP in a
	  configurable amout of time.  Those configuration options have been added to
	  the global config object.  This feature is only used when auth_username
	  is enabled.

	  Finally, default_realm was added to the globals object to replace the hard
	  coded "asterisk" used when an endpoint is not yet identified.

	  The testsuite tests all pass but new tests are forthcoming for this new
	  feature.

	  ASTERISK-25835 #close
	  Reported-by: Ross Beer

	  Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d

2016-04-27 13:23 +0000 [2b150f0b80]  Mark Michelson <mmichelson@digium.com>

	* func_odbc: Check connection status before executing queries.

	  A recent change to func_odbc made it so that a single connection was
	  maintained per DSN. The problem was that the code was optimistic about
	  the health of the connection after initially opening it and did nothing
	  to re-connect in case the connection had died.

	  This change adds a check before executing a query to ensure that the
	  connection to the database is still up and running.

	  ASTERISK-25963 #close
	  Reported by Ross Beer

	  Change-Id: Id33c86eb04ff48ca088bb2e3086c27b3b683491d

2016-04-15 11:59 +0000 [860b135c88]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: disable multi domain to improve realtime performace

	  This patch added new global pjsip option 'disable_multi_domain'.
	  Disabling Multi Domain can improve Realtime performance by reducing
	  number of database requests.

	  ASTERISK-25930 #close

	  Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7

2016-04-01 07:50 +0000 [7281770710]  Jean Aunis <jean.aunis@prescom.fr>

	* app_chanspy: reduce audio loss on the spying channel.

	  ChanSpy was creating its audiohook with the flags AST_AUDIOHOOK_TRIGGER_SYNC
	  and AST_AUDIOHOOK_SMALL_QUEUE, which caused audio frames to be lost when
	  queues grow too large or when read and write queues go out of sync.
	  Now these flags are set conditionally:
	  - AST_AUDIOHOOK_TRIGGER_SYNC is not set if the option "o" is set
	  - a new option "l" is created: if set, AST_AUDIOHOOK_SMALL_QUEUE will not
	  be set on the audiohook

	  ASTERISK-25866

	  Change-Id: I9c7652f41d9fa72c8691e4e70ec4fd16b047a4dd

2016-04-14 07:03 +0000 [81ea80b74c]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_exten_state: Add config support for exten state publishers.

	  This change adds the ability to configure outbound publishing of
	  extension state. Right now stuff is merely set up to store the
	  configuration and to register a global extension state callback. The
	  act of constructing the body and sending is not yet complete.

	  Configurable elements right now are a regex for filtering the context,
	  a regex for filtering the extension, and the body type to publish.

	  ASTERISK-25922 #close

	  Change-Id: Ia7e630136dfc355073c1cadff8ad394a08523d78

2016-04-26 11:13 +0000 [c480159045]  Joshua Colp <jcolp@digium.com>

	* chan_sip: Give more time for TCP/TLS threads to stop.

	  The unload process currently tells each TCP/TLS to terminate but
	  does not wait for them to do so. This introduces a race condition
	  where the container holding the threads may be destroyed before
	  the threads are able to remove themselves from it. When they
	  finally do the container is invalid and can't be used causing a
	  crash.

	  A previous change existed which waited a bit to wait for any
	  stranglers to finish. This change extends this and waits longer.

	  ASTERISK-25961 #close

	  Change-Id: Idc6262b670ca49ede32061159e323b7b63c6f3c6

2016-04-26 05:48 +0000 [8ae69cffef]  Joshua Colp <jcolp@digium.com>

	* app_queue: Fix crash when unloading module.

	  When unloading the app_queue module the members in each queue are
	  destroyed and as part of this they are removed from the pending
	  members container. Unfortunately a crash would occur as the container
	  was destroyed before the members were removed.

	  This change tweaks ordering so the container destruction occurs
	  after the members are destroyed.

	  ASTERISK-16115

	  Change-Id: I48c728668c55aee3d05b751a5d450fb57e87f44b

2016-04-24 22:51 +0000 [284bb814ac]  gtjoseph <gjoseph@digium.com>

	* config:  Fix ast_config_text_file_save2 writability check for missing files

	  A patch I did back in 2014 modified ast_config_text_file_save2 to check the
	  writability of the main file and include files before truncating and re-writing
	  them.  An unintended side-effect of this was that if a file doesn't exist,
	  the check fails and the write is aborted.

	  This patch causes ast_config_text_file_save2 to check the writability of the
	  parent directory of missing files instead of checking the file itself.  This
	  allows missing files to be created again.  A unit test was also added to
	  test_config to test saving of config files.

	  The regression was discovered when app_voicemail's passwordlocation=spooldir
	  feature stopped working.

	  ASTERISK-25917 #close
	  Reported-by: Jonathan Rose

	  Change-Id: Ic4dbe58c277a47b674679e49daed5fc6de349f80

2016-04-25 08:11 +0000 [f99ec857c8]  Javier Acosta <javier.acosta@beeonline.es>

	* Fix case sensitive actions in AMI QueueSummary and QueueStatus

	  ASTERISK-25954 #close
	  Reported by: Javier Acosta

	  Change-Id: I00be83d45cc7e8385de2523012bd196aafeeb256
	  (cherry picked from commit c0688a6398f27296ff849848a2e416e036d794e3)

2016-04-21 14:23 +0000 [30ab21d5fa]  Kevin Harwell <kharwell@digium.com>

	* app_queue: queue members can receive multiple calls

	  It was possible for a queue member that is a member of at least 2 or more
	  queues to receive mulitiple calls at the same time. This happened because
	  of a race between when a member was being rung and when the device state
	  notified the other queue(s) member object of the state change.

	  This patch makes it so when a queue member is being rung it gets added to
	  a global pool of queue members. If that same member is tried again, e.g.
	  from another queue, and it is found to already exist in the pending member
	  container then it will not ring that member.

	  ASTERISK-16115 #close

	  Change-Id: I546dd474776d158c2b6be44205353dee5bac7e48

2016-04-22 17:53 +0000 [99fcf2a791]  gtjoseph <gjoseph@digium.com>

	* res_agi:  Prevent run_agi from eating frames it shouldn't

	  The run_agi function is eating control frames when it shouldn't be. This is
	  causing issues when an AGI is run from CONNECTED_LINE_SEND_SUB in a blond
	  transfer.

	  Alice calls Bob. Bob attended transfers to Charlie but hangs up before Charlie
	  answers.

	  Alice gets the COLP UPDATE indicating Charlie but Charlie never gets an UPDATE
	  and is left thinking he's connected to Bob.

	  In this case, when CONNECTED_LINE_SEND_SUB runs on Alice's channel and it calls
	  an AGI, the extra eaten frames prevent CONNECTED_LINE_SEND_SUB from running on
	  Charlie's channel.

	  The fix was to accumulate deferrable frames in the "forever" loop instead of
	  dropping them, and re-queue them just before running the actual agi command
	  or exiting.

	  ASTERISK-25951 #close

	  Change-Id: I0f4bbfd72fc1126c2aaba41da3233a33d0433645

2016-04-22 15:25 +0000 [757ec6172b]  Richard Mudgett <rmudgett@digium.com>

	* test_message.c: Wait longer in case dialplan also processes the test message.

	  Bumped the wait from 1 second to 5 seconds.  The test message was hitting my
	  default call handler and failing the test because it took longer.

	  Change-Id: I3a03737f25e92983de00548fcc7bbc50dd7544ba

2016-04-21 23:53 +0000 [41ecf22587]  Kirill Katsnelson <kkm@smartaction.com>

	* chan_sip: Make autocreated peers send PeerStatus events

	  Since Stasis has been introduced, an attempt to send AMI messages by an
	  autocreated peer caused a crash, and all events from autocreated peers were
	  semi-inadvertently disabled altogether in 0b83761. This change restores the
	  disabled functionality.

	  ASTERISK-25950

	  Change-Id: Iecc350f23db603fadb2f302064643ebe9664e974

2016-04-13 17:09 +0000 [b3cc74fda9]  Richard Mudgett <rmudgett@digium.com>

	* manager_channels.c: Fix allocation failure crash.

	  An earlier allocation failure failed to create a channel snapshot for the
	  AMI HangupRequest/SoftHangupRequest event which resulted in a crash in
	  channel_hangup_request_cb().  Where the stasis message gets generated
	  cannot tell if the NULL snapshot returned was because of an allocation
	  failure or the channel was a dummy channel.

	  * Made channel_hangup_request_cb() check if the channel blob has a
	  snapshot and exit if it doesn't.

	  * Eliminated the RAII_VAR usage in channel_hangup_request_cb().

	  Change-Id: I0b6a1c4e95cbb7d80b2a7054c6eadecc169dfd24

2016-04-13 13:50 +0000 [a63656b419]  Richard Mudgett <rmudgett@digium.com>

	* Bridge system: Fix memory leaks and double frees on impart failure.

	  You cannot reference the passed in features struct after calling
	  ast_bridge_impart().  Even if the call fails.

	  Change-Id: I902b88ba0d5d39520e670fb635078a367268ea21

2016-04-13 13:20 +0000 [71dfa35540]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c: Fix crash if channel fails to join mixing tech.

	  softmix_bridge_join() failed because of an allocation failure.  To address
	  this, the softmix bridge technology now checks if the channel failed to
	  join softmix successfully.  In addition, the bridge now begins the process
	  of kicking the channel out of the bridge so we don't have channels
	  partially in the bridge for very long.

	  * Fix the test_channel_feature_hooks.c unit tests.  The test channel must
	  have a valid codec to join the simple_bridge technology.  This patch makes
	  joining a bridge more strict by not allowing partially joined channels to
	  remain in the bridge.

	  Change-Id: I97e2ade6a2bcd1214f24fb839fda948825b61a2b

2016-04-12 15:29 +0000 [06632a0d11]  Richard Mudgett <rmudgett@digium.com>

	* Manager: Short circuit AMI message processing.

	  Improve AMI message processing performance if there are no consumers
	  listening for the messages.  We now skip creating the AMI event message
	  text strings.

	  Change-Id: I7b22fc5ec4e500d00635c1a467aa8ea68a1bb2b3

2016-04-13 17:54 +0000 [6ddd856b86]  Richard Mudgett <rmudgett@digium.com>

	* manager.c: Eliminate most RAII_VAR usage.

	  * Made ast_manager_event_blob_create() not allocate the ao2 event object
	  with a lock as it is not needed.

	  Change-Id: I8e11bfedd22c21316012e0b9dd79f5918f644b7c

2016-04-22 13:49 +0000 [924738e950]  Mark Michelson <mmichelson@digium.com>

	* func_odbc: Use one connection per DSN.

	  res_odbc was changed in Asterisk 13.8.0 to remove connection management,
	  opting instead to let unixodbc maintain open connections and return
	  those to Asterisk as requested.

	  This was a boon for realtime, since it meant that multiple threads could
	  potentially run parallel queries since they could each be using their
	  own database connections.

	  However, on the user-facing side, func_odbc, there were some inherent
	  behaviors being relied on that no longer hold true after the change.
	  One such reported behavior was that MySQL's LAST_INSERTED_ID() works
	  per-connection. This means that if Asterisk uses separate connections
	  for every database operation, whereas before it used one connection for
	  everything, we have broken expectations and functionality.

	  The fix provided in this patch is to make func_odbc use a single
	  database connection per DSN. This way, user-facing database usage will
	  have the same behavior as it did pre-13.8.0. However, realtime, which is
	  the real workhorse of database interaction, will continue to let
	  unixodbc manage connections.

	  ASTERISK-25938 #close
	  Reported by Edwin Vandamme

	  Change-Id: Iac961fe79154c6211569afcdfec843c0c24c46dc

2016-04-22 13:02 +0000 [6ede210c98]  Leif Madsen <leif@leifmadsen.com>

	* Remove reference to non-existent sip.conf option

	  Option was removed in commit 7f883ef495b57ae9182e47213d01d5e8009dbf3f

	  ASTERISK-25927 #close

	  Change-Id: I92f9b0196d9fc41d1d58354c07340c465ef1fcf8

2016-04-21 08:26 +0000 [c991e5472e]  Diederik de Groot <dkgroot@talon.nl>

	* lock.c: Check *lt before dereferencing it

	  *lt is NULL if t->tracking == 0

	  ASTERISK-25948 #close

	  Change-Id: I4a81af28f9c82a74aa82413d772a7dc8fa6f45ba

2016-04-15 14:36 +0000 [6b1a632290]  Richard Mudgett <rmudgett@digium.com>

	* res_stasis: Handle re-enter stasis bridge with swap channel.

	  We lose the fact that there is a swap channel if there is one.  We
	  currently wind up rejoining the stasis bridge as a normal join after the
	  swap channel has already been kicked from the bridge.

	  This patch preserves the swap channel so the AMI/ARI events can note that
	  the channel joining the bridge is swapping with another channel.  Another
	  benefit to swaqpping in one operation is if there are any channels that
	  get lonely (MOH, bridge playback, and bridge record channels).  The lonely
	  channels won't leave before the joining channel has a chance to come back
	  in under stasis if the swap channel is the only reason the lonely channels
	  are staying in the bridge.

	  ASTERISK-25947 #close
	  Reported by: Richard Mudgett

	  ASTERISK-24649
	  Reported by: John Bigelow

	  ASTERISK-24782
	  Reported by: John Bigelow

	  Change-Id: If37ea508831d1fed6dbfac2f191c638fc0a850ee

2016-04-19 16:58 +0000 [1c5248c383]  Richard Mudgett <rmudgett@digium.com>

	* bridge: Hold off more than one imparting channel at a time.

	  An earlier patch blocked the ast_bridge_impart() call until the channel
	  either entered the target bridge or it failed.  Unfortuantely, if the
	  target bridge is stasis and the imprted channel is not a stasis channel,
	  stasis bounces the channel out of the bridge to come back into the bridge
	  as a proper stasis channel.  When the channel is bounced out, that
	  released the block on ast_bridge_impart() to continue.  If the impart was
	  a result of a transfer, then it became a race to see if the swap channel
	  would get hung up before the imparted channel could come back into the
	  stasis bridge.  If the imparted channel won then everything is fine.  If
	  the swap channel gets hung up first then the transfer will fail because
	  the swap channel is leaving the bridge.

	  * Allow a chain of ast_bridge_impart()'s to happen before any are
	  unblocked to prevent the race condition described above.  When the channel
	  finally joins the bridge or completely fails to join the bridge then the
	  ast_bridge_impart() instances are unblocked.

	  ASTERISK-25947
	  Reported by: Richard Mudgett

	  ASTERISK-24649
	  Reported by: John Bigelow

	  ASTERISK-24782
	  Reported by: John Bigelow

	  Change-Id: I8fef369171f295f580024ab4971e95c799d0dde1

2016-04-19 17:52 +0000 [70e860ec49]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_callerid:  Clear out display name if id->name is not valid

	  When create_new_id_hdr creates a new RPID or PAI header, it starts by cloning
	  the From header, then it overwrites the display name and uri from the channel's
	  connected.id.  If the connected.id.name wasn't valid, create_new_id_hdr was
	  leaving the display name from the From header in the new RPID or PAI header.
	  On an attended transfer where the originator had a caller id number set but not
	  a display name, the re-INVITE to the final transferee had the number of the
	  originator but the display name of the transferer.

	  Added a check to clear out the display name in the new header if
	  connected.id.name was invalid.

	  ASTERISK-25942 #close

	  Change-Id: I60b4bf7a7ece9b7425eba74151c0b4969cd2738b

2016-04-19 13:02 +0000 [d95512a7dd]  Joshua Colp <jcolp@digium.com>

	* app_talkdetect: Make the module core supported.

	  This module is used as part of testsuite tests to confirm
	  stuff works. I'm accordingly marking it as core as it is
	  required by those tests.

	  Change-Id: I558e7af7679b22b8ed641d7dd37ee4ca35b11e88

2016-04-18 12:12 +0000 [0235a66532]  Mark Michelson <mmichelson@digium.com>

	* PJSIP: Remove PJSIP parsing functions from uri length validation.

	  The PJSIP parsing functions provide a nice concise way to check the
	  length of a hostname in a SIP URI. The problem is that in order to use
	  those parsing functions, it's required to use them from a thread that
	  has registered with PJLib.

	  On startup, when parsing AOR configuration, the permanent URI handler
	  may not be run from a PJLib-registered thread. Specifically, this could
	  happen when Asterisk was started in daemon mode rather than
	  console-mode. If PJProject were compiled with assertions enabled, then
	  this would cause Asterisk to crash on startup.

	  The solution presented here is to do our own parsing of the contact URI
	  in order to ensure that the hostname in the URI is not too long. The
	  parsing does not attempt to perform a full SIP URI parse/validation,
	  since the hostname in the URI is what is important.

	  ASTERISK-25928 #close
	  Reported by Joshua Colp

	  Change-Id: Ic3d6c20ff3502507c17244a8b7e2ca761dc7fb60

2016-04-18 17:00 +0000 [b8b60135ec]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_registrar: Fix bad memory-ness with user_agent.

	  Recent changes to the PJSIP registrar resulted in tests failing due to
	  missing AOR_CONTACT_ADDED test events. The reason for this was that the
	  user_agent string had junk values in it, resulting in being unable to
	  generate the event.

	  I'm going to be honest here, I have no idea why this was happening. Here
	  are the steps needed for the user_agent variable to get messed up:
	  * REGISTER is received
	  * First contact in the REGISTER results in a contact being removed
	  * Second contact in the REGISTER results in a contact being added
	  * The contact, AOR, expiration, and user agent all have to be passed as
	    format parameters to the creation of a string. Any subset of those
	    parameters would not be enough to cause the problem.

	  Looking into what was happening, the thing that struck me as odd was
	  that the user_agent variable was meant to be set to the value of the
	  User-Agent SIP header in the incoming REGISTER. However, when removing a
	  contact, the user_agent variable would be set (via ast_strdupa inside a
	  loop) to the stored contact's user_agent. This means that the
	  user_agent's value would be incorrect when attempting to process further
	  contacts in the incoming REGISTER.

	  The fix here is to use a different variable for the stored user agent
	  when removing a contact. Correcting the behavior to be correct also
	  means the memory usage is less weird, and the issue no longer occurs.

	  ASTERISK-25929 #close
	  Reported by Joshua Colp

	  Change-Id: I7cd24c86a38dec69ebcc94150614bc25f46b8c08

2016-04-18 13:41 +0000 [6cfa02394f]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_transport_management: Allow unload to occur.

	  At shutdown it is possible for modules to be unloaded that wouldn't
	  normally be unloaded. This allows the environment to be cleaned up.

	  The res_pjsip_transport_management module did not have the unload
	  logic in it to clean itself up causing the res_pjsip module to not
	  get unloaded. As a result the res_pjsip monitor thread kept going
	  processing traffic and timers when it shouldn't.

	  Change-Id: Ic8cadee131e3b2c436a81d3ae8bb5775999ae00a

2016-04-15 11:41 +0000 [6365f0018f]  Richard Mudgett <rmudgett@digium.com>

	* bridge_channel.c: Ignore role setup failure in channel push.

	  We have to setup the channel roles after the bridge class push is called
	  because the bridge class push callback may have set roles on the incoming
	  channel.  Since we have already partially pushed the channel into the
	  bridge and reversing what we have already done could be problematic, the
	  only thing we can do is press on to complete pushing the channel into the
	  bridge.

	  * Ignore any channel role setup errors after pushing the channel into a
	  bridge.  The channel may behave incorrectly in the bridge but we can no
	  longer abort the push at this time.

	  Change-Id: I08a97082b729052ee65cdca6bb730cf1289ede00

2016-04-17 15:37 +0000 [f06ce7f90a]  Jaco Kroon <jaco@uls.co.za>

	* chan_sip: Don't verify table if rtupdate=no

	  If rtupdate=no do not verify sipregs/peers table has updatable fields.

	  ASTERISK-25934 #close

	  Change-Id: Iaa2c53037b93daccc7e7333c40d61861847b856d

2016-04-18 04:53 +0000 [dbb47e0a47]  ibercom <ibercom123@gmail.com>

	* app_queue: Frequent segfaults in function can_ring_entry()

	  ASTERISK-25888 #close

	  Change-Id: I007a2f2dd99823e04fb5be3ff01f02b0a2956117

2016-04-15 16:51 +0000 [af114edb8b]  Richard Mudgett <rmudgett@digium.com>

	* stasis_bridge.c: Update stasis bridge push diagnostic messages.

	  Change-Id: I195b14994c9dcccb9452491ca20a885d2a54605a

2016-04-12 14:55 +0000 [5e64d7e7a3]  Mark Michelson <mmichelson@digium.com>

	* Dial: Combine frame handling functions.

	  There is a good amount of repetition in the two frame handling routines
	  in the Dial API. This commit combines the two functions into one.

	  This is in preparation for an upcoming commit that adds the ability to
	  handle frames for a channel in a bridge.

	  ASTERISK-25925
	  Reported by Mark Michelson

	  Change-Id: Iaae2f174e3058e774cb44e10659fcdfb85345c58

2016-04-11 16:20 +0000 [a6e2ba187a]  Alexei Gradinari <alex2grad@gmail.com>

	* Codecs: strip codec name while parsing allow/disallow options

	  Failed registration using PJSIP/Realtime if one of the codec name
	  in allow/disallow option is wrong or contains space.

	  This patch strip codec name.

	  ASTERISK-25914

	  Change-Id: Ifdf02de94e5ddbce305640f6f0666084a3b9283d

2016-04-14 13:49 +0000 [be4333ddad]  Mark Michelson <mmichelson@digium.com>

	* transport management: Register thread with PJProject.

	  The scheduler thread that kills idle TCP connections was not registering
	  with PJProject properly and causing assertions if PJProject was built in
	  debug mode.

	  This change registers the thread with PJProject the first time that the
	  scheduler callback executes.

	  AST-2016-005

	  Change-Id: I5f7a37e2c80726a99afe9dc2a4a69bdedf661283

2016-03-17 12:28 +0000 [e83499df56]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Add serialized scheduler (res_pjsip/pjsip_scheduler.c)

	  There are several places that do scheduled tasks or periodic housecleaning,
	  each with its own implementation:

	  * res_pjsip_keepalive has a thread that sends keepalives.
	  * pjsip_distributor has a thread that cleans up expired unidentified requests.
	  * res_pjsip_registrar_expire has a thread that cleans up expired contacts.
	  * res_pjsip_pubsub uses ast_sched directly and then calls ast_sip_push_task.
	  * res_pjsip_sdp_rtp also uses ast_sched to send keepalives.

	  There are also places where we should be doing scheduled work but aren't.
	  A good example are the places we have sorcery observers to start registration
	  or qualify.  These don't work when changes are made to a backend database
	  without a pjsip reload.  We need to check periodically.

	  As a first step to solving these issues, a new ast_sip_sched facility has
	  been created.

	  ast_sip_sched wraps ast_sched but only uses ast_sched as a scheduled queue.
	  When a task is ready to run, ast_sip_task_pusk is called for it. This ensures
	  that the task is executed in a PJLIB registered thread and doesn't hold up the
	  ast_sched thread so it can immediately continue processing the queue.  The
	  serializer used by ast_sip_sched is one of your choosing or a random one from
	  the res_pjsip pool if you don't choose one.

	  Another feature is the ability to automatically clean up the task_data when the
	  task expires (if ever).  If it's an ao2 object, it will be dereferenced, if
	  it's a malloc'd object it will be freed.  This is selectable when the task is
	  scheduled.  Even if you choose to not auto dereference an ao2 task data object,
	  the scheduler itself maintains a reference to it while the task is under it's
	  control.  This prevents the data from disappearing out from under the task.

	  There are two scheduling models.

	  AST_SIP_SCHED_TASK_PERIODIC specifies that the invocations of the task occur at
	  the specific interval.  That is, every "interval" milliseconds, regardless of
	  how long the task takes.  If the task takes longer than the interval, it will
	  be scheduled at the next available multiple of interval.  For exmaple: If the
	  task has an interval of 60 secs and the task takes 70 secs (it better not),
	  the next invocation will happen at 120 seconds.

	  AST_SIP_SCHED_TASK_DELAY specifies that the next invocation of the task should
	  start "interval" milliseconds after the current invocation has finished.

	  Also, the same ast_sched facility for fixed or variable intervals exists.  The
	  task's return code in conjunction with the AST_SIP_SCHED_TASK_FIXED or
	  AST_SIP_SCHED_TASK_VARIABLE flags controls the next invocation start time.

	  One res_pjsip.h housekeeping change was made.  The pjsip header files were
	  added to the top.  There have been a few cases lately where I've needed
	  res_pjsip.h just for ast_sip calls and had compiles fail spectacularly because
	  I didn't add the pjsip header files to my source even though I never referenced
	  any pjsip calls.

	  Finally, a few new convenience APIs were added to astobj2 to make things a
	  little easier in the scheduler.  ao2_ref_and_lock() calls ao2_ref() and
	  ao2_lock() in one go.  ao2_unlock_and_unref() does the reverse. A few macros
	  were also copied from res_phoneprov because I got tired of having to duplicate
	  the same hash, sort and compare functions over and over again. The
	  AO2_STRING_FIELD_(HASH|SORT|CMP)_FN macros will insert functions suitable for
	  aor_container_alloc into your source.

	  This facility can be used immediately for the situations where we already have
	  a thread that wakes up periodically or do some scheduled work.  For the
	  registration and qualify issues, additional sorcery and schema changes would
	  need to be made so that we can easily detect changed objects on a periodic
	  basis without having to pull the entire database back to check.  I'm thinking
	  of a last-updated timestamp on the rows but more on this later.

	  Change-Id: I7af6ad2b2d896ea68e478aa1ae201d6dd016ba1c

2016-03-08 12:12 +0000 [216f22fd0f]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_transport_management: Kill idle TCP connections.

	  "Idle" here means that someone connects to us and does not send a SIP
	  request. PJProject will not automatically time out such connections, so
	  it's up to Asterisk to do it instead.

	  When we receive an incoming TCP connection, we will start a timer
	  (equivalent to transaction timer D) waiting to receive an incoming
	  request. If we do not receive a request in that timeframe, then we will
	  shut down the TCP connection.

	  ASTERISK-25796 #close
	  Reported by George Joseph

	  AST-2016-005

	  Change-Id: I7b0d303e5d140d0ccaf2f7af562071e3d1130ac6

2016-03-08 10:52 +0000 [d9fba46016]  Mark Michelson <mmichelson@digium.com>

	* Rename res_pjsip_keepalive res_pjsip_transport_management

	  ASTERISK-25796
	  Reported by George Joseph

	  AST-2016-005

	  Change-Id: Id322a05f927392293570599730050bc677d99433

2016-04-14 07:23 +0000 [7b8b6e2e4f]  Mark Michelson <mmichelson@digium.com>

	* AST-2016-004: Fix crash on REGISTER with long URI.

	  Due to some ignored return values, Asterisk could crash if processing an
	  incoming REGISTER whose contact URI was above a certain length.

	  ASTERISK-25707 #close
	  Reported by George Joseph

	  Patches:
	      0001-res_pjsip-Validate-that-URIs-don-t-exceed-pjproject-.patch

	  AST-2016-004

	  Change-Id: I3ea7cee16f29c8088794de3085ca7523c1c4833d

2016-04-12 13:10 +0000 [ff3af764de]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c: Fix crash if could not allocate the dsp.

	  Fix off nominal crash where we could not setup the channel to process
	  frames for the softmix bridge technology because of allocation failure.

	  Change-Id: Ic307a8386e46bf551e48fcd1eb97276714d56372

2016-04-13 13:38 +0000 [caa416d5f3]  gtjoseph <george.joseph@fairview5.com>

	* stringfields:  Update extended string fields for master only.

	  In 13, the new ast_string_field_header structure had to be dynamically
	  allocated and assigned to a pointer in ast_string_field_mgr to preserve ABI
	  compatability.  In master, it can be converted to being a structure-in-place in
	  ast_string_field_mgr to eliminate the extra alloc and free calls.

	  Change-Id: Ia97c5345eec68717a15dc16fe2e6746ff2a926f4

2016-04-12 15:41 +0000 [bd3671b397]  gtjoseph <george.joseph@fairview5.com>

	* pjproject:  Add patch for removing strip of '[]' from header params

	  From the patch submitted to Teluu on 4/12/2016
	  <<<<<<<<<
	  The wholesale stripping of '[]' from header parameters causes issues if
	  something (like a port) occurs after the final ']'.

	  '[2001:a::b]' will correctly parse to '2001:a::b'
	  '[2001:a::b]:8080' will correctly parse to '2001:a::b' but the scanner is left
	  with ':8080' and parsing stops with a syntax error.

	  I can't even find a case where stripping the '[]' is a good thing anyway.  Even
	  if you continued to parse and resulted in a string that looks like this...
	  '2001:a::b:8080', it's not valid.

	  This came up in Asterisk because Kamailio sends us a Contact with an alias
	  URI parameter that has an IPv6 address in it like this:
	  Contact: <sip:1171@127.0.0.1:5080;alias=[2001:1:2::3]~43691~6>
	  which should be legal but causes a syntax error because of the characters
	  after the final ']'.  Even if it didn't, the '[]' should still not be stripped.

	  I've run the Asterisk Test Suite for PJSIP (252 tests) many of which are IPv6
	  enabled.  No issues were caused by removing the code that strips the '[]'.
	  >>>>>>>>>>>

	  ASTERISK-25123 #close
	  Reported-by: Anthony Messina

	  Change-Id: I5cb33f4ebf07ee1f2b26d07caae715e2ec65595a

2016-04-12 09:10 +0000 [5a0534dc62]  Joshua Colp <jcolp@digium.com>

	* app_voicemail: Fix test_voicemail_notify_endl test.

	  The test_voicemail_notify_endl test checks the end-of-line
	  characters of an email message to confirm that they are consistent.
	  The test wrongfully assumed that reading from the email message
	  into a buffer will always result in more than 1 character being
	  read. This is incorrect. If only 1 character was read the test
	  would go outside of the buffer and access other memory causing
	  a crash.

	  The test now checks to ensure that 2 or more characters are read
	  in ensuring the test stays within the buffer.

	  ASTERISK-25874 #close

	  Change-Id: Ic2c89cea6e90f2c0bc2d8138306ebbffd4f8b710

2016-04-07 12:02 +0000 [c00c298a0e]  Alexei Gradinari <alex2grad@gmail.com>

	* app_voicemail/IMAP: function 'save_to_folder' creates wrong folder

	  If try to move message to Cust1 (number 5)
	  the function 'save_to_folder' tries to create Greeting folder instead of Cust1.

	  This patch fixed it by setting GREETINGS_FOLDER = -1

	  ASTERISK-24927 #close

	  Change-Id: I03d1a761894bcc2d130ec9b003bbcddc28e25c51

2016-04-07 16:18 +0000 [49813bc9e5]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip: Add headers to AMI Event ContactStatusDetail

	  * Added Useragent and RegExpire headers to AMI Event
	  ContactStatusDetail with associated documentation.

	  ASTERISK-25903 #close

	  Change-Id: If3d121e943e588d016ba51d4eb9c6a421a562239

2016-04-05 16:56 +0000 [4e00e31ef1]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_outbound_publish: Add transport for outbound PUBLISH

	  The first available transport of the appropriate type is used now.
	  This patch adds new config option 'transport' for outbound-publish.
	  If transport is set then outbound PUBLISH requests will use this transport.

	  ASTERISK-25901 #close

	  Change-Id: Ib389130489b70e36795b0003fa5fd386e2680151

2016-04-11 14:26 +0000 [2cc56573de]  Jaco Kroon <jaco@uls.co.za>

	* core_unreal: Fix hangupcauses not getting set on Local channels

	  ASTERISK-25912 #close

	  Change-Id: I8e72e6894feaf36c9450f2788d205d07baec23aa

2016-04-01 13:30 +0000 [a621dd5e96]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip contact:  Lock expiration/addition of contacts

	  Contact expiration can occur in several places:  res_pjsip_registrar,
	  res_pjsip_registrar_expire, and automatically when anyone calls
	  ast_sip_location_retrieve_aor_contact.  At the same time, res_pjsip_registrar
	  may also be attempting to renew or add a contact.  Since none of this was locked
	  it was possible for one thread to be renewing a contact and another thread to
	  expire it immediately because it was working off of stale data.  This was the
	  casue of intermittent registration/inbound/nominal/multiple_contacts test
	  failures.

	  Now, the new named lock functionality is used to lock the aor during contact
	  expire and add operations and res_pjsip_registrar_expire now checks the
	  expiration with the lock held before deleting the contact.

	  ASTERISK-25885 #close
	  Reported-by: Josh Colp

	  Change-Id: I83d413c46a47796f3ab052ca3b349f21cca47059

2016-04-10 14:16 +0000 [8637f29d24]  gtjoseph <george.joseph@fairview5.com>

	* pjproject:  Add patch to fix Via IPv6 parsing

	  There's a bug in pjproject's sip_parser where the ":" wasn't correctly
	  interpreted. This is causing IPv6 addresses in the "received" parameter of the
	  Via header to cause a syntax check failure.

	  This patch was submitted to Teluu on 4/10/2016.

	  ASTERISK-25910 #close
	  Reported-by: Anthony Messina

	  Change-Id: Ic7e4c4aa14ded61860401ec349f5177568c4d922

2016-03-31 20:04 +0000 [216abb0ae7]  gtjoseph <george.joseph@fairview5.com>

	* lock:  Add named lock capability

	  Locking some objects like sorcery objects can be tricky because the underlying
	  ao2 object may not be the same for all callers.  For instance, two threads that
	  call ast_sorcery_retrieve_by_id on the same aor name might actually get 2
	  different ao2 objects if the underlying wizard had to rehydrate the aor from a
	  database. Locking one ao2 object doesn't have any effect on the other even if
	  those objects had locks in the first place.

	  Named locks allow access control by keyspace and key strings.  Now an "aor"
	  named "1000" can be locked and any other thread attempting to lock "aor" "1000"
	  will wait regardless of whether the underlying ao2 object is the same or not.
	  Mutex and rwlocks are supported.

	  This capability will initially be used to lock an aor when multiple threads may
	  be attempting to prune expired contacts from it.

	  Change-Id: If258c0b7f92b02d07243ce70e535821a1ea7fb45

2016-04-07 11:37 +0000 [f9dab80816]  Alexei Gradinari <alex2grad@gmail.com>

	* app_voicemail/IMAP: IMAP access FATAL error: Out of memory

	  Sometimes uw-imap function 'mail_fetchbody' returns huge len
	  which then pass to uw-imap function 'rfc822_base64'.
	  uw-imap tries to allocate huge memory and abort() on fail.

	  This patch check the len.
	  If the len more than max size (128 Mbytes) log error.
	  This patch also set variables len, newlen to avoid uninizialezed len.
	  This patch also check pointer returned by rfc822_base64.

	  ASTERISK-25899 #close

	  Change-Id: I4a0e7d655f11abef6a5224e2169df6d5c1f1caca

2016-04-07 16:39 +0000 [b3be945415]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_dialog_info: Add missing "direction" attribute in NOTIFY event

	  BLF pickup isn't working on Cisco SPA and Snom phones
	  if the direction="recipient" attribute is missing in 'dialog' tag.

	  This patch adds direction="recipient" if extension state is
	  Ringing.

	  ASTERISK-24601 #close

	  Change-Id: I5b2c097ca29fd59e92ba237ca5d397cb1b0bcd8c

2016-04-06 17:57 +0000 [6138a75e8e]  Richard Mudgett <rmudgett@digium.com>

	* pbx.h: Make ast_state_cb_type take more const.

	  This eliminates some casts that I made a note saying v10 and above
	  would no longer need them.

	  Better late than never :)

	  Change-Id: I346cdb3032b6478ceb40eb6fe732978b54035572

2016-04-07 10:59 +0000 [72c19f7dc5]  Richard Mudgett <rmudgett@digium.com>

	* pbx.c: Minor code rearangements.

	  * Pull out a loop invariant.

	  * Convert an else-if ladder to a switch statement.

	  Change-Id: I0a95cfa9474a4600b9865f7b444534d275b37e95

2016-04-07 12:26 +0000 [28cefc3e88]  Richard Mudgett <rmudgett@digium.com>

	* pbx: Update doxygen for extension state watchers.

	  Change-Id: Id1403b12136de62a272c01bb355aef65fd2c2d1e

2016-04-07 11:49 +0000 [751d7a5a49]  gtjoseph <george.joseph@fairview5.com>

	* alembic:  Remove batch operations (and sqlite support)

	  Because SQLite doesn't support full ALTER capabilities, alembic scripts
	  require batch operations.  However, that capability wasn't available until
	  0.7.0 which some distributions haven't reached yet.  Therefore, the batch
	  operations introduced in commit 86d6e44cc (review 2319) have been reverted
	  and SQLite is unsupported again, for now anyway.

	  Tested the full upgrade and downgrade on MySQL/Mariadb and Postgresql.

	  ASTERISK-25890 #close
	  Reported-by: Harley Peters

	  Change-Id: I82eba5456736320256f6775f5b0b40133f4d1c80

2016-04-07 11:05 +0000 [2eaeea690d]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_registrar_expire: Fix race condition at shutdown.

	  When shutting down, the PJSIP sorcery is destroyed. The registrar
	  expiration module queries the PJSIP sorcery to determine what
	  to expire. As there was no synchronization between termination
	  of the expiration thread and the unloading of the module it was
	  possible for the thread to try to access the PJSIP sorcery after
	  it had been destroyed.

	  This change ensures that the thread is shut down before allowing
	  the module to be considered unloaded.

	  Change-Id: I69fd239edbaaf160c2d37ae00d3ac06e5596fe8b

2016-04-06 16:28 +0000 [3e5672d843]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Fix configuration setting of "regcontext".

	  Due to a merge problem two options were swapped causing the
	  regcontext setting to not get set.

	  Change-Id: Icb33edc668e7357bacbaec2861a6b5ac64edaff1

2016-04-06 08:01 +0000 [8ed5f61152]  Jacek Konieczny <jkonieczny@eggsoft.pl>

	* frame.c: Copy the whole subclass in ast_frdup().

	  The problem is ast_frdup() does not copy whole frame.subclass for voice,
	  video and image frames, only the format is copied.  For video frames, the
	  subclass structure contains the .frame_ending flag used to put the RTP
	  marker where it needs to be.

	  ASTERISK-25894 #close

	  Change-Id: I812ca90e84ed5d4f473b997d0dd0d3c5a915fe33

2016-03-30 17:18 +0000 [abbb2edd4c]  Mark Michelson <mmichelson@digium.com>

	* ARI: Add method to Dial a created channel.

	  This adds a new ARI method that allows for you to dial a channel that
	  you previously created in ARI.

	  By combining this with the create method for channels, it allows for a
	  workflow where a channel can be created, manipulated, and then dialed.
	  The channel is under control of the ARI application during all stages of
	  the Dial and can even be manipulated based on channel state changes
	  observed within an ARI application.

	  The overarching goal for this is to eventually be able to add a dialed
	  channel to a Stasis bridge earlier than the "Up" state. However, at the
	  moment more work is needed in the Dial and Bridge APIs in order to
	  facilitate that.

	  ASTERISK-25889 #close

	  Change-Id: Ic6c399c791e66c4aa52454222fe4f8b02483a205

2016-03-30 17:01 +0000 [dd48d60c5b]  Mark Michelson <mmichelson@digium.com>

	* ARI: Add method to create a new channel.

	  This adds a new ARI method to the channels resource that allows for the
	  creation of a new channel. The channel is created and then placed into
	  the specified Stasis application.

	  This is different from the existing originate method that creates a
	  channel, dials it, and then places the answered channel into the
	  dialplan or a Stasis application. This method does not attempt to call
	  the channel at all. Dialing is left as a later step after channel
	  creation. This allows for pre-dialing channel manipulation if desired.

	  ASTERISK-25889

	  Change-Id: I3c96a0aba914b08e39f6256371a5bd4c92cbded8

2016-03-28 11:31 +0000 [1dc5e28624]  Joshua Colp <jcolp@digium.com>

	* pbx: Add support for autohints.

	  This change introduces the concept of autohints. These are hints
	  which are created as a result of device state changes occurring within
	  the core. When this happens a hint will be created (if it does not
	  exist already) using the device name as the extension.

	  For example if a device state change is received for "PJSIP/bob"
	  and autohints are enabled on a context then a hint will exist in
	  that context for "bob" with a device of "PJSIP/bob".

	  For virtual or custom device states the name after the type will
	  be used. For example if the device state of "Custom:bob" changes
	  then a hint will exist in that context for "bob" with a device of
	  "Custom:bob".

	  This functionality can be enabled in extensions.conf by placing
	  "autohints=yes" in a context.

	  ASTERISK-25881 #close

	  Change-Id: I7e444c7da41b7b7d33374420fec658beeb18584e

2016-04-05 14:23 +0000 [a098251e7e]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Handle deferred SDP hold/unhold properly.

	  Some SIP devices indicate hold/unhold using deferred SDP reinvites. In
	  other words, they provide no SDP in the reinvite.

	  A typical transaction that starts hold might look something like this:

	  * Device sends reinvite with no SDP
	  * Asterisk sends 200 OK with SDP indicating sendrecv on streams.
	  * Device sends ACK with SDP indicating sendonly on streams.

	  At this point, PJMedia's SDP negotiator saves Asterisk's local state as
	  being recvonly.

	  Now, when the device attempts to unhold, it again uses a deferred SDP
	  reinvite, so we end up doing the following:

	  * Device sends reinvite with no SDP
	  * Asterisk sends 200 OK with SDP indicating recvonly on streams
	  * Device sends ACK with SDP indicating sendonly on streams

	  The problem here is that Asterisk offered recvonly, and by RFC 3264's
	  rules, if an offer is recvonly, the answer has to be sendonly. The
	  result is that the device is not taken off hold.

	  What is supposed to happen is that Asterisk should indicate sendrecv in
	  the 200 OK that it sends. This way, the device has the freedom to
	  indicate sendrecv if it wants the stream taken off hold, or it can
	  continue to respond with sendonly if the purpose of the reinvite was
	  something else (like a session timer refresher).

	  The fix here is to alter the SDP negotiator's state when we receive a
	  reinvite with no SDP. If the negotiator's state is currently in the
	  recvonly or inactive state, then we alter our local state to be
	  sendrecv. This way, we allow the device to indicate the stream state as
	  desired.

	  ASTERISK-25854 #close
	  Reported by Robert McGilvray

	  Change-Id: I7615737276165eef3a593038413d936247dcc6ed

2016-03-30 16:47 +0000 [ef4d3f1328]  Mark Michelson <mmichelson@digium.com>

	* Dial: Add function to append already-created channel.

	  The Dial API takes responsiblity for creating an outbound channel when
	  calling ast_dial_append(). This commit adds a new function,
	  ast_dial_append_channel(), which allows us to create the channel outside
	  the Dial API and then to append the channel to the ast_dial structure.

	  This is useful for situations where the channel's creation and dialing
	  are distinct operations. Upcoming ARI early bridge work will illustrate
	  its usage.

	  ASTERISK-25889

	  Change-Id: Id8179f64f8f99132f80dead8d5db2030fd2c0509

2016-03-27 23:33 +0000 [984d6fd95c]  gtjoseph <george.joseph@fairview5.com>

	* config:  Allow filters when appending to a category

	  In sorcery based config files where there are multiple categories with the same
	  name, you can't use the (+) operator to reliably append to a category because
	  config.c stops looking when it finds the first one with the same name.

	  Example:

	  [1000]
	  type = endpoint

	  [1000]
	  type = aor

	  [1000](+)
	  authenticate_qualify = yes

	  This config will fail because config.c appends authenticate_qualify to the
	  first category it finds, the endpoint, and that's not valid for endpoint.

	  Solution:

	  The capability to find a category that contains a certain variable already
	  exists so the only real change was to parse anything after the '+' that's not a
	  comma, as a filter string.

	  [1000]
	  type = endpoint

	  [1000]
	  type = aor

	  [1000](+type=aor)
	  authenticate_qualify = yes

	  This now works as expected.

	  Although the following example doesn't make any sense for pjsip, you can even
	  specify multiple filters:

	  [1000](+type=aor&qualify_frequency=10)

	  ASTERISK-25868 #close
	  Reported-by: Nick Repin

	  Change-Id: I10773da4c79db36fbf1993961992af63d3441580

2016-04-05 10:21 +0000 [784fb43f43]  Joshua Colp <jcolp@digium.com>

	* res_http_websocket: Make core supported.

	  Websockets are a core part of ARI support and as such this
	  module should also be core supported.

	  Change-Id: I8f9283c6a167152761b92984779bb39e3db51a9c

2016-03-25 23:22 +0000 [4d40b161c3]  gtjoseph <george.joseph@fairview5.com>

	* stringfields:  Refactor to allow fields to be added to the end of structures

	  String fields are great, except that you can't add new ones without breaking
	  ABI compatibility because it shifts down everything else in the structure.
	  The only alternative is to add your own char * field to the end of the
	  structure and manage the memory yourself which isn't ideal, especially since
	  you then can't use the OPT_STRINGFIELD_T type.

	  Background:

	  The reason string fields had to be declared inside the
	  AST_DECLARE_STRING_FIELDS block was to facilitate iteration over all declared
	  fields for initialization, compare and copy.  Since AST_DECLARE_STRING_FIELDS
	  declared the pool, then the fields, then the manager, you could use the offsets
	  of the pool and manager and iterate over the sequential addresses in between to
	  access the fields. The actual pool, field allocation and field set operations
	  don't actually care where the field is.  It's just iteration over the fields
	  that was the problem.

	  Solution: Extended String Fields

	  An extended string field is one that is declared outside the
	  AST_DECLARE_STRING_FIELDS block but still (anywhere) inside the parent
	  structure.  Other than using AST_STRING_FIELD_EXTENDED instead of
	  AST_STRING_FIELD, it looks the same as other string fields.  It's storage comes
	  from the pool and it participates in string field compare and copy operations
	  peformed on the parent structure. It's also a valid target for the
	  OPT_STRINGFIELD_T aco option type.

	  Implementation:

	  To keep track of the extended fields and make sure that ABI isn't broken, the
	  existing embedded_pool pointer in the manager structure was repurposed to be a
	  pointer to a separate header structure that contains the embedded_pool pointer
	  plus a vector of fields.  The length of the manager structure didn't change and
	  the embedded_pool pointer isn't used in the macros, only the stringfields C
	  code.  A side benefit of this is that changing the header structure in the
	  future won't break ABI.

	  ast_string_fields_init initializes the normal string fields and appends them to
	  the vector, and subsequent calls to ast_string_field_init_extended initialize
	  and append the extended fields. Cleanup, ast_string_fields_cmp, and
	  ast_string_fields_copy can now work on the vector instead of sequentially
	  traversing the addresses between the pool and manager.

	  The total size of a structure using string fields didn't change, whether using
	  extended fields or not, nor have the offsets of any structure members, either
	  inside the original block or outside.  Adding an extended field to the end of a
	  structure is the same as adding a char *.

	  Details:

	  The stringfield C code was pulled out from utils.c and into stringfields.c.
	  It just made sense.

	  Additional work was done in ast_string_field_init and
	  ast_calloc_with_stringfields to handle the allocation of the new header
	  structure and the vector, and the associated cleanup.  In the process some
	  additional NULL pointer checking was added.

	  A lot of work was done in stringfields.h since the logic for compare and copy
	  is there.  Documentation was added as well as somne additional NULL checking.

	  The ability to call ast_calloc_with_stringfields with a number of structures
	  greater than 1 never really worked.  Well, the calloc worked but there was no
	  way to access the additional structures or clean them up.  It was agreed that
	  there was no use case for requesting more than 1 structure so an ast_assert
	  was added to prevent it and the iteration code removed.

	  Testing:

	  The stringfield unit tests were updated to test both normal and extended
	  fields.  Tests for ast_string_field_ptr_set_by_fields and
	  ast_calloc_with_stringfields were also added.

	  As an ABI test, 13 was compiled from git and the res_pjsip_* modules, except
	  res_pjsip itself, saved off.  The patch was then added and a full compile and
	  install was performed.  Then the older res_pjsip_* moduled were copied over the
	  installed versions so res_pjsip was new and the rest were old.  No issues.

	  contact->aor, which is a char * at the end of contact, was then changed to an
	  extended string field and a recompile and reinstall was performed, again
	  leaving stock versions of the the res_pjsip_* modules.  Again, no issues with
	  the res_pjsip_* modules using the old stringfield implementation and with
	  contact->aor as a char *, and res_pjsip itself using the new stringfield
	  implementation and contact->aor being an extended string field.

	  Finally, several existing string fields were converted to extended string
	  fields to test OPT_STRINGFIELD_T.  Again, no issues.

	  Change-Id: I235db338c5b178f5a13b7946afbaa5d4a0f91d61

2016-04-04 18:02 +0000 [c07e1190ec]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_mwi:  Fix segv caused by 16c7d8e74a9af13f98c3c22aa9c43ce39965f6b7

	  I forgot the new voicemail_extension wasn't a stringfield and didn't check
	  for NULL where I should have.

	  Change-Id: I029482d5c2ab72474838750461bd46b0809c90fb

2016-04-03 11:47 +0000 [060b7b83bc]  gtjoseph <george.joseph@fairview5.com>

	* install_prereq:  Fix check_installed_debs remove subversion

	  check_installed_debs wasn't handling virtual packages like libsrtp-dev and
	  libresample-dev and on multiarch systems it was accidentally filtering out all
	  packages if any :i386 packages were found instead of just filtering out the
	  :i386 packages themselves.

	  Change-Id: Ifd68da0d1ee30cc84df14de3f9b9079d7c3cecda

2016-04-01 13:09 +0000 [433d2c4bbf]  gtjoseph <george.joseph@fairview5.com>

	* utils.c:  Fix typo in handle_show_locks

	  ast_cli_allow_on_shutdown(e) should have been ast_cli_allow_at_shutdown(e).

	  Change-Id: I4f092495c0b2bfd85c2651e0b5877bf4d05d9faf

2016-03-30 18:34 +0000 [304f81780d]  gtjoseph <george.joseph@fairview5.com>

	* pjproject_bundled:  Fix use of LDCONFIG for shared library link creation

	  LDCONFIG apparently isn't set to something sane on all systems so the creation
	  of the shared library links fails.  Instead of just testing for non-blank,
	  main/Makefile now checks that LDCONFIG is actually executable and reverts to
	  LN if it isn't.

	  This applies to both libasteriskpj and libasteriskssl.

	  Thanks to 'abelbeck' for pointing out that the issue was LDCONFIG.

	  ASTERISK-25873 #close
	  Reported-by: Hans van Eijsden

	  Change-Id: I25b76379bc637726ec044b2c0e709b56b3701729

2016-03-29 13:47 +0000 [0ea742d33a]  Richard Mudgett <rmudgett@digium.com>

	* res_stasis: Add control ref to playback and recording structs.

	  The stasis_app_playback and stasis_app_recording structs need to have a
	  struct stasis_app_control ref.  Other threads can get a reference to the
	  playback and recording structs from their respective global container.
	  These other threads can then use the control pointer they contain after
	  the control struct has gone.

	  * Add control ref to stasis_app_playback and stasis_app_recording structs.

	  With the refs added, the control command queue can now have a circular
	  control reference which will cause the control struct to never get
	  released if the control's command queue is not flushed when the channel
	  leaves the Stasis application.  Also the command queue needs better
	  protection from adding commands if the control->is_done flag is set.

	  * Flush the control command queue on exit.

	  ASTERISK-25882 #close

	  Change-Id: I3cf1fb59cbe6f50f20d9e35a2c07ac07d7f4320d

2016-03-28 18:10 +0000 [53f63ad770]  Richard Mudgett <rmudgett@digium.com>

	* res_stasis: Fix crash on a hanging up channel.

	  * Give the struct stasis_app_control ao2 object a ref to the channel held
	  in the object.  Now the channel will still be around if a thread needs to
	  post a stasis message instead of crash because the topic was destroyed.

	  * Moved stopping any lingering silence generator out of the struct
	  stasis_app_control destructor and made it a part of exiting the Stasis
	  application.  Who knows which thread the destructor will be called under
	  so it cannot affect the channel's silence generator.  Not only was the
	  channel unprotected when the silence generator was stopped, stasis may no
	  longer even control the channel.

	  ASTERISK-25882

	  Change-Id: I21728161b5fe638cef7976fa36a605043a7497e4

2016-03-30 13:31 +0000 [2fab4d7da8]  Richard Mudgett <rmudgett@digium.com>

	* res_stasis.c: Protect channel datastore list from stasis end.

	  Change-Id: Ifadc469590bd4d5368e19d3763db3bd1f80fdb95

2016-03-29 18:06 +0000 [ece2edaa04]  Richard Mudgett <rmudgett@digium.com>

	* res_ari: Cannot get control also means channel is unavailable.

	  The only caller of ari_bridges_play_found() has this note:

	  If ari_bridges_play_found fails because the channel is unavailable for
	  playback, The channel will be removed from the playback list soon.  We can
	  keep trying to get channels from the list until we either get one that
	  will work or else there isn't a channel for this bridge anymore, in which
	  case we'll revert to ari_bridges_play_new.

	  Change-Id: Ib068141b367ccaa17be0dab4181c98e26c5127d6

2016-03-29 14:29 +0000 [2f36cba4b5]  Richard Mudgett <rmudgett@digium.com>

	* res_stasis_recording.c: Cleanup stasis_app_recording_find_by_name().

	  Change-Id: Ic7d93c402c498677a122505558859c853d4e5ac7

2016-03-28 14:23 +0000 [34457dd9db]  Richard Mudgett <rmudgett@digium.com>

	* core_unreal.c: Add clarification comment about channel ref.

	  Change-Id: I0be0627260cd8d6b6c3cc345949dcfdf32eff1f3

2016-03-30 12:38 +0000 [2b3261cd36]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_mwi:  Allow subscribe to vm access extension as an alias

	  Background:

	  If your extension is 1000 and the voicemail access extension is 1571 and you
	  dial 1571, usually a dialplan rule calls voicemailmain with your extension and
	  you are placed directly in your mailbox.  Therefore most admins program the
	  voicemail (or other speed dial) button on their phones to the access extension.
	  Some phones (Snom at least) use whatever is programmed there to also subscribe
	  for MWI and so can't dial one number and subscribe to another.  This works fine
	  in chan_sip because chan_sip completely ignores the user portion of the
	  SUBSCRIBE message request URI.  If it can match the peer, is subscribes to the
	  peer's mailbox.  The user could be set to anything or nothing and you'd still
	  get subscribed to your mailbox.

	  Issue:

	  chan_pjsip actually uses the user portion of the URI to find an aor and its
	  mailboxes.  Therefore a subscribe to 1571 results in a 404.  Sure, you can
	  create an aor for 1571 but you certainly can't add your entire voicemail
	  system's mailboxes to it and everyone would get notified of every MWI.

	  Solution:

	  When an MWI subscribe comes in and an aor can't be found that matches the
	  resource directly, check the resource against the endpoint's aors.  If an aor
	  is found that has a voicemail_extension that matches the resource, use it.

	  ASTERISK-25865
	  Reported-by: Ross Beer

	  Change-Id: I770ea185f751f1ada888fafb4b452115f1c06e9e

2016-03-24 22:55 +0000 [e2524fcee3]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_mwi:  Add voicemail extension and mwi_subscribe_replaces_unsolicited

	  res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds
	  the Message-Account header to the MWI NOTIFY.  Also, specifying mailboxes
	  on endpoints for unsolicited mwi and on aors for subscriptions required
	  that the admin know in advance which the client wanted.  If you specified
	  mailboxes on the endpoint, subscriptions were rejected even if you also
	  specified mailboxes on the aor.

	  Voicemail extension:
	  * Added a global default_voicemail_extension which defaults to "".
	  * Added voicemail_extension to both endpoint and aor.
	  * Added ast_sip_subscription_get_dialog for support.
	  * Added ast_sip_subscription_get_sip_uri for support.

	  When an unsolicited NOTIFY is constructed, the From header is parsed, the
	  voicemail extension from the endpoint is substituted for the user, and the
	  result placed in the Message-Account field in the body.

	  When a subscribed NOTIFY is constructed, the subscription dialog local uri
	  is parsed, the voicemail_extension from the aor (looked up from the
	  subscription resource name) is substituted for the user, and the result
	  placed in the Message-Account field in the body.

	  If no voicemail extension was defined, the Message-Account field is not added
	  to the NOTIFY body.

	  mwi_subscribe_replaces_unsolicited:
	  * Added mwi_subscribe_replaces_unsolicited to endpoint.

	  The previous behavior was to reject a subscribe if a previous internal
	  subscription for unsolicited MWI was found for the mailbox.  That remains the
	  default.  However, if there are mailboxes also set on the aor and the client
	  subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal
	  subscription is removed and replaced with the external subscription.  This
	  allows an admin to configure mailboxes on both the endpoint and aor and allows
	  the client to select which to use.

	  ASTERISK-25865 #close
	  Reported-by: Ross Beer

	  Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea

2016-03-30 09:46 +0000 [724b9ab28f]  gtjoseph <george.joseph@fairview5.com>

	* res_rtp_asterisk:  Fix placement of txcount increment

	  Commit 1bce690ccb36a4744a327c07af23a9a3a0fa20cd was incrementing txcount
	  for rtcp packets as well as rtp packets and that was causing sender reports
	  to be generated instead of receiver reports in cases where no rtp was actually
	  being sent.

	  Moved the txcount increment from __rtp_sento, which handles both rtp and rtcp,
	  to rtp_sento which only handles rtp packets.

	  Discovered by the hep/rtcp-receiver test.

	  Change-Id: Ie442e4bb947a68847a676497021ba10ffaf376d5

2016-03-26 22:33 +0000 [c4064727d2]  gtjoseph <george.joseph@fairview5.com>

	* chan_pjsip:  Add 'pjsip show channelstats'

	  Added the ability to show channel statistics to chan_pjsip (cli_functions.c)

	  Moved the existing 'pjsip show channel(s)' functionality from
	  pjsip_configuration to cli_functions.c.  The stats needed chan_pjsip's
	  private header so it made sense to move the existing channel commands as well.

	  Now using stasis_cache_dump to get the channel snapshots rather than retrieving
	  all endpoints, then getting each one's channel snapshots.  Much more efficient.

	  Change-Id: I03b114522126d27434030b285bf6d531ddd79869

2016-03-25 10:59 +0000 [970803efcb]  Jacek Konieczny <jkonieczny@eggsoft.pl>

	* res_rtp_asterisk: Use separate SRTP session for RTCP with DTLS

	  Asterisk uses separate UDP ports for RTP and RTCP traffic and RFC 5764
	  explicitly states:

	    There MUST be a separate DTLS-SRTP session for each distinct pair of
	    source and destination ports used by a media session

	  This means RTP keying material cannot be used for DTLS RTCP, which was
	  the reason why RTCP encryption would fail.

	  ASTERISK-25642

	  Change-Id: I7e8779d8b63e371088081bb113131361b2847e3a

2016-03-25 10:42 +0000 [9785e8d090]  Jacek Konieczny <jkonieczny@eggsoft.pl>

	* app_echo: forward and generate VIDUPDATE frames

	  When using app_echo via WebRTC with VP8 video the video would appear
	  only after a few minutes, because there would be nothing to request
	  a full reference frame.

	  This fixes the problem in both ways:
	  - echos any VIDUPDATE frames received on the channel
	  - sends one such frame when first video frame is to be forwarded

	  This makes the echo work with Firefox and Chrome WebRTC implementation.

	  ASTERISK-25867 #close

	  Change-Id: I73bda87bf7532ee8bfb28d917045a21034908c1e

2016-03-27 12:53 +0000 [44ffb5105a]  gtjoseph <george.joseph@fairview5.com>

	* res_rtp_asterisk:  Fix packet stats on bridged connection

	  rxcount, txcount, rxoctetcount and txoctetcount weren't being calculated
	  for bridged streams because the calulations were being done after the
	  bridged short-circuit.  Actually, rxoctetcount wasn't ever being calculated.

	  Moved the calculations so they occur for all valid received packets and
	  all transmitted packets.  Also added rxoctetcount and txoctetcount to
	  ast_rtp_instance_stat.

	  Change-Id: I08fb06011a82d38c3b4068867a615068fbe59cbb

2016-03-10 19:52 +0000 [c971a64366]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip/pjsip_options:  Fix From generation on outgoing OPTIONS

	  No one seemed to notice but every time an OPTIONS goes out, it goes
	  out with a From of "asterisk" (or whatever the default from_user is set to),
	  even if you specify an endpoint.

	  The issue had several causes...
	  qualify_contact is only called with an endpoint if called from the CLI.
	  If the endpoint is NULL, qualify_contact only looks up the endpoint if
	  authenticate_qualify=yes. Even then, it never passes it on to
	  ast_sip_create_request where the From header is set.  Therefore From
	  is always "asterisk" (or whatever the default from_user is set to).
	  Even if ast_sip_create_request were to get an endpoint, it only sets
	  the From if endpoint->from_user is set.

	  The fix is 4 parts...

	  First, create_out_of_dialog_request was modified to use the endpoint id
	  if endpoint was specified and from_user is not set.

	  Second, qualify_contact was modified to always look up an endpoint if
	  one wasn't specified regardless of authenticate_qualify.  It then passes
	  the endpoint on to create_out_of_dialog_request.

	  Third (and most importantly), find_an_endpoint was modified to find
	  an endpoint by using an "aors LIKE %contact->aor%" predicate with
	  ast_sorcery_retrieve_by_fields.  As such, this patch will only work
	  if the sorcery realtime optimizations patch goes in.  Otherwise we'd
	  be pulling the entire endpoints database every time we send an OPTIONS.
	  Since we already know the contact's aor, the on_endpoint callback was also
	  modified to just check if the contact->aor is an exact match to one of
	  the endpoint's.

	  Finally, since we now have an endpoint for every OPTIONS request,
	  res_pjsip/endpt_send_request (which handles out-of-dialog reqests) was
	  updated to get the transport from the endpoint and set it on tdata.
	  Now the correct transport is used.

	  Change-Id: I2207e12bb435e373bd1e03ad091d82e5aba011af

2016-03-08 15:55 +0000 [c948ce9651]  gtjoseph <george.joseph@fairview5.com>

	* sorcery/res_pjsip:  Refactor for realtime performance

	  There were a number of places in the res_pjsip stack that were getting
	  all endpoints or all aors, and then filtering them locally.

	  A good example is pjsip_options which, on startup, retrieves all
	  endpoints, then the aors for those endpoints, then tests the aors to see
	  if the qualify_frequency is > 0.  One issue was that it never did
	  anything with the endpoints other than retrieve the aors so we probably
	  could have skipped a step and just retrieved all aors. But nevermind.

	  This worked reasonably well with local config files but with a realtime
	  backend and thousands of objects, this was a nightmare.  The issue
	  really boiled down to the fact that while realtime supports predicates
	  that are passed to the database engine, the non-realtime sorcery
	  backends didn't.

	  They do now.

	  The realtime engines have a scheme for doing simple comparisons. They
	  take in an ast_variable (or list) for matching, and the name of each
	  variable can contain an operator.  For instance, a name of
	  "qualify_frequency >" and a value of "0" would create a SQL predicate
	  that looks like "where qualify_frequency > '0'".  If there's no operator
	  after the name, the engines add an '=' so a simple name of
	  "qualify_frequency" and a value of "10" would return exact matches.

	  The non-realtime backends decide whether to include an object in a
	  result set by calling ast_sorcery_changeset_create on every object in
	  the internal container.  However, ast_sorcery_changeset_create only does
	  exact string matches though so a name of "qualify_frequency >" and a
	  value of "0" returns nothing because the literal "qualify_frequency >"
	  doesn't match any name in the objset set.

	  So, the real task was to create a generic string matcher that can take a
	  left value, operator and a right value and perform the match. To that
	  end, strings.c has a new ast_strings_match(left, operator, right)
	  function.  Left and right are the strings to operate on and the operator
	  can be a string containing any of the following: = (or NULL or ""), !=,
	  >, >=, <, <=, like or regex.  If the operator is like or regex, the
	  right string should be a %-pattern or a regex expression.  If both left
	  and right can be converted to float, then a numeric comparison is
	  performed, otherwise a string comparison is performed.

	  To use this new function on ast_variables, 2 new functions were added to
	  config.c.  One that compares 2 ast_variables, and one that compares 2
	  ast_variable lists.  The former is useful when you want to compare 2
	  ast_variables that happen to be in a list but don't want to traverse the
	  list.  The latter will traverse the right list and return true if all
	  the variables in it match the left list.

	  Now, the backends' fields_cmp functions call ast_variable_lists_match
	  instead of ast_sorcery_changeset_create and they can now process the
	  same syntax as the realtime engines.  The realtime backend just passes
	  the variable list unaltered to the engine.  The only gotcha is that
	  there's no common realtime engine support for regex so that's been noted
	  in the api docs for ast_sorcery_retrieve_by_fields.

	  Only one more change to sorcery was done...  A new config flag
	  "allow_unqualified_fetch" was added to reg_sorcery_realtime.
	  "no": ignore fetches if no predicate fields were supplied.
	  "error": same as no but emit an error. (good for testing)
	  "yes": allow (the default);
	  "warn": allow but emit a warning. (good for testing)

	  Now on to res_pjsip...

	  pjsip_options was modified to retrieve aors with qualify_frequency > 0
	  rather than all endpoints then all aors.  Not only was this a big
	  improvement in realtime retrieval but even for config files there's an
	  improvement because we're not going through endpoints anymore.

	  res_pjsip_mwi was modified to retieve only endpoints with something in
	  the mailboxes field instead of all endpoints then testing mailboxes.

	  res_pjsip_registrar_expire was completely refactored.  It was retrieving
	  all contacts then setting up scheduler entries to check for expiration.
	  Now, it's a single thread (like keepalive) that periodically retrieves
	  only contacts whose expiration time is < now and deletes them.  A new
	  contact_expiration_check_interval was added to global with a default of
	  30 seconds.

	  Ross Beer reports that with this patch, his Asterisk startup time dropped
	  from around an hour to under 30 seconds.

	  There are still objects that can't be filtered at the database like
	  identifies, transports, and registrations.  These are not going to be
	  anywhere near as numerous as endpoints, aors, auths, contacts however.

	  Back to allow_unqualified_fetch.  If this is set to yes and you have a
	  very large number of objects in the database, the pjsip CLI commands
	  will attempt to retrive ALL of them if not qualified with a LIKE.
	  Worse, if you type "pjsip show endpoint <tab>" guess what's going to
	  happen? :)  Having a cache helps but all the objects will have to be
	  retrieved at least once to fill the cache.  Setting
	  allow_unqualified_fetch=no prevents the mass retrieve and should be used
	  on endpoints, auths, aors, and contacts.  It should NOT be used for
	  identifies, registrations and transports since these MUST be
	  retrieved in bulk.

	  Example sorcery.conf:

	  [res_pjsip]
	  endpoint=config,pjsip.conf,criteria=type=endpoint
	  endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error

	  ASTERISK-25826 #close
	  Reported-by: Ross Beer
	  Tested-by: Ross Beer

	  Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67

2016-03-25 23:19 +0000 [8e8cf80cea]  Philip Correia

	* res_parking: Fix blind transfer dynamic lots creation.

	  Blind transfers to a recognized parking extension need to use the parker's
	  channel variable values to create the dynamic parking lot.  This is
	  because there is always only one parker while the parkee may actually be a
	  multi-party bridge.  A multi-party bridge can never supply the needed
	  channel variables to create the dynamic parking lot.  In the multi-party
	  bridge blind transfer scenario, the parker's CHANNEL(parkinglot) value and
	  channel variables are inherited by the local channel used to park the
	  bridge.

	  * In park_common_setup(), make use the parker instead of the parkee to
	  supply the dynamic parking lot channel variable values.  In all but one
	  case, the parkee is the same as the parker.  However, in the recognized
	  parking extension blind transfer scenario for a two party bridge they are
	  different channels.  For consistency, we need to use the parker channel.

	  * In park_local_transfer(), pass the CHANNEL(parkinglot) value to the
	  local channel when blind transferring a multi-party bridge to a recognized
	  parking extension.

	  * When a local channel starts a call, the Local;2 side needs to inherit
	  the CHANNEL(parkinglot) value from Local;1.

	  The DTMF one-touch parking case wasn't even trying to create dynamic
	  parking lots before it aborted the attempt.

	  * In parking_park_call(), add missing code to create a dynamic parking
	  lot.

	  A DTMF bridge hook is documented as returning -1 to remove the hook.
	  Though the hook caller is really coded to accept non-zero.  See the
	  ast_bridge_hook_callback typedef.

	  * In feature_park_call(), don't remove the DTMF one-touch parking hook
	  because of an error.

	  ASTERISK-24605 #close
	  Reported by:  Philip Correia
	  Patches:
	        call_park.patch (license #6672) patch uploaded by Philip Correia

	  Change-Id: I221d3a8fcc181877a1158d17004474d35d8016c9

2016-03-23 14:24 +0000 [3cf714031c]  Richard Mudgett <rmudgett@digium.com>

	* res_parking: Cleanup find_channel_parking_lot_name() usage.

	  Change-Id: I8f7a8890aef27824301c642d4d15407ac83e6f02

2016-03-18 14:01 +0000 [13e75ee04f]  Richard Mudgett <rmudgett@digium.com>

	* res_parking: Misc fixes.

	  res/parking/parking_applications.c:

	  * Add malloc fail checks in setup_park_common_datastore().

	  * Fix playing parking failed announcement to only happen on non-blind
	  transfers in park_app_exec().  It could never go out before because a test
	  was provedly always false.

	  res/parking/parking_bridge.c:

	  * Fix NULL tolerance in generate_parked_user() because
	  bridge_parking_push() can theoretically pass a NULL parker channel if the
	  parker channel went away for some reason.

	  * Clarify some weird code dealing with blind_transfer in
	  bridge_parking_push().

	  res/parking/parking_bridge_features.c:

	  * Made park_local_transfer() set BLINDTRANSFER on the Local;1 channel
	  which will be bulk copied to the Local;2 channel on the subsequent
	  ast_call().  The additional advantage is if the parker channel has the
	  BLINDTRANSFER and ATTENDEDTRANSFER variables set they are now guaranteed
	  to be overridden.

	  res/parking/parking_manager.c:

	  * Fix AMI Park action input range checking of the Timeout header in
	  manager_park().

	  * Reduced locking scope to where needed in manager_park().

	  res/res_parking.c:

	  * Fix some off nominal missing unlocks by eliminating the returns.

	  Change-Id: Ib64945bc285acb05a306dc12e6f16854898915ca

2014-12-15 05:23 +0000 [e2853ae337]  Philip Correia

	* res_parking: Update parking documentation for dynamic parking lots.

	  * Remove duplicate res_parking.conf courtesytone config option
	  documentation.

	  ASTERISK-24596 #close
	  Reported by:  Philip Correia

	  ASTERISK-24605
	  Reported by:  Philip Correia
	  Patches:
	        call_park_app_doc.patch (license #6672) patch uploaded by Philip Correia

	  Change-Id: I90a92a891c6494dc08173e675856afcc4764c5b5

2016-03-25 06:02 +0000 [72a897c534]  Joshua Colp <jcolp@digium.com>

	* media_cache: Demote warning to debug as it may occur often.

	  The file playback system will now query the media cache and then
	  the old file functionality. Under normal conditions this will result
	  in the cache failing to retrieve a file causing a warning message
	  to get output each time a file is played back.

	  This change demotes this warning to a debug message.

	  Change-Id: Ib72246ba300b5cce32774bfb3c26634bfb708624
2016-03-10 16:58 +0000 [89e94e886c]  Mark Michelson <mmichelson@digium.com>

	* Restrict CLI/AMI commands on shutdown.

	  During stress testing, we have frequently seen crashes occur because a
	  CLI or AMI command attempts to access information that is in the process
	  of being destroyed.

	  When addressing how to fix this issue, we initially considered fixing
	  individual crashes we observed. However, the changes required to fix
	  those problems would introduce considerable overhead to the nominal
	  case. This is not reasonable in order to prevent a crash from occurring
	  while Asterisk is already shutting down.

	  Instead, this change makes it so AMI and CLI commands cannot be executed
	  if Asterisk is being shut down. For AMI, this is absolute. For CLI,
	  though, certain commands can be registered so that they may be run
	  during Asterisk shutdown.

	  ASTERISK-25825 #close

	  Change-Id: I8887e215ac352fadf7f4c1e082da9089b1421990

2016-03-24 14:08 +0000 [3f720155b7]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Do not send all codecs on INVITE. Do not break on Session-Timers.

	  Asterisk 13.7.0 included a fix for ASTERISK-24543, not to send all those
	  codecs, which the caller did not request/support. That fix was not complete
	  because on the second Session Timer all codecs were sent again. Some VoIP/SIP
	  clients interpreted that complete codec-list as a change in the SIP session.
	  Because of that, Asterisk did not send the RTP audio via NAT anymore which
	  created a non-audio scenario after the second Session Timer fired.

	  ASTERISK-24543 #close

	  Change-Id: I1881827816ab7fd47eb4287a95961179b34a0b66

2016-03-19 07:34 +0000 [894071ea2c]  Gianluca Merlo <gianluca.merlo@gmail.com>

	* config: fix flags in uint option handler

	  The configuration unsigned integer option handler sets flags for the
	  parser as if the option should be a signed integer (PARSE_INT32),
	  leading to errors on "out of range" values. Fix flags (PARSE_UINT32).

	  A fix to res_pjsip is also present which stops invalid flags from
	  being passed when registering sorcery object fields for qualify
	  status.

	  ASTERISK-25612 #close

	  Change-Id: I96b539336275e0e72a8e8033487d2c3344debd3e

2016-03-24 07:51 +0000 [13cdf3e8a1]  Walter Doekes <walter+asterisk@wjd.nu>

	* musiconhold: Only warn if music class is not found in memory and database.

	  The log message when a MusicOnHold music class was not found was changed
	  from debug level to WARNING level in Asterisk 11.19 and 13.5.  For those
	  using realtime musiconhold, this message is wrong because it warns
	  before checking the database.

	  This changeset delays the warning until after the database has been
	  checked.

	  Reported-by: Conrad de Wet
	  ASTERISK-25444 #close

	  Change-Id: I6cfb2db2f9cfbd2bb3d30566ecae361c4abf6dbf

2016-03-24 05:48 +0000 [87c9ab97ea]  Walter Doekes <walter+asterisk@wjd.nu>

	* core/logging: Fix broken syslog levels on older glibc.

	  The fix to ASTERISK-25407 introduced the usage of LOG_MAKEPRI. However
	  this macro is broken in older glibc (< 2.17); it would left-shift the
	  facility a second time, causing the resultant priority to become
	  invalid.

	  The syslog manpage mentions nothing about LOG_MAKEPRI and suggests this:

	      The priority argument is formed by ORing the facility and the level
	      values [...].

	  ASTERISK-25510 #close
	  Reported by: Michael Newton

	  Change-Id: Ia89debe7fac5ad090c7ef595c0707f31bb1e3d03
2016-03-24 06:18 +0000 [a72f3b5bb4]  Joshua Colp <jcolp@digium.com>

	* tests/test_http_media_cache: Fix file descriptor leak in test.

	  Change-Id: Ie8a9ae3d13bdeaacafc8d28271adc6707f633a5f

2016-02-28 19:05 +0000 [13efea24f7]  Matt Jordan <mjordan@digium.com>

	* main/app: Only look to end of file if ':end' is specified, and not just ':'

	  There is a little known feature in app_controlplayback that will cause the
	  specified offset to be used relative to the end of a file if a ':end' is
	  detected within the filename.

	  This feature is pretty bad, but okay.

	  However, a bug exists in this code where a ':' detected in the filename
	  will cause the end pointer to be non-NULL, even if the full ':end' isn't
	  specified. This causes us to treat an unspecified offset (0) as being
	  "start playing from the end of the file", resulting in no file playback
	  occurring.

	  This patch fixes this bug by resetting the end pointer if ':end' is not
	  found in the filename.

	  Change-Id: Ib4c7b1b45283e4effd622a970055c51146892f35

2015-12-26 15:29 +0000 [ca14b99e6e]  Matt Jordan <mjordan@digium.com>

	* main/file: Add the ability to play media in the media cache

	  This patch allows applications/APIs that access media through the core file
	  APIs to play media in the media cache. Prior to determining if a 'filename'
	  exists, the filename is passed to the media cache's retrieve API call. If
	  that call succeeds, the local file specified passed back by the API is
	  opened for streaming. When used in this fashion, the 'filename' is actually
	  a URI that the media cache process and understand.

	  ASTERISK-25654 #close

	  Change-Id: I73b6e2e90c3e91b8500581c45cdf9c0dc785f5f0

2015-12-30 10:52 +0000 [01962a3932]  Matt Jordan <mjordan@digium.com>

	* tests/test_http_media_cache: Add unit tests for res_http_media_cache

	  This patch adds unit tests for res_http_media cache, that covers nominal
	  creation and retrieval - and through them as well, staleness and deletion
	  checks. In addition, this patch adds tests that covers the interaction of
	  various HTTP headers, including Expires, Etag, and Cache-Control.

	  ASTERISK-25654

	  Change-Id: I2db101e307c863857fe416d6f5bf4cace9ac7cf5

2015-01-29 08:38 +0000 [22e2340813]  Matt Jordan <mjordan@digium.com>

	* res/res_http_media_cache: Add an HTTP(S) backend for the core media cache

	  This patch adds a bucket backend for the core media cache that interfaces to a
	  remote HTTP server. When a media item is requested in the cache, the cache will
	  query its bucket backends to see if they can provide the media item. If that
	  media item has a scheme of HTTP or HTTPS, this backend will be invoked.

	  The backend provides callbacks for the following:
	   * create - this will always retrieve the URI specified by the provided
	              bucket_file, and store it in the file specified by the object.
	   * retrieve - this will pull the URI specified and store it in a temporary
	                file. It is then up to the media cache to move/rename this file
	                if desired.
	   * delete - destroys the file associated with the bucket_file.
	   * stale - if the bucket_file has expired, based on received HTTP headers from
	             the remote server, or if the ETag on the server no longer matches
	             the ETag stored on the bucket_file, the resource is determined to be
	             stale.

	  Note that the backend respects the ETag, Expires, and Cache-Control headers
	  provided by the HTTP server it is querying.

	  ASTERISK-25654

	  Change-Id: Ie201c2b34cafc0c90a7ee18d7c8359afaccc5250

2015-12-26 15:31 +0000 [791b4c9f81]  Matt Jordan <mjordan@digium.com>

	* main/media_cache: Provide an extension on the local file associated with a URI

	  This patch does the following:

	  First, it addresses file extension handling in the media cache. The media core
	  in Asterisk is a bit interesting in that it wants:
	   * A file to have an extension on it. That extension is used to associate the
	     file with a defined format module.
	   * The filename passed to the core to not have an extension on it. This allows
	     the core to match the available file formats with the format a channel
	     is capable of handling.

	  Unfortunately, this makes the current implementation a bit lacking in the media
	  cache. By default, we do not store the extension of a retrieved URI on the
	  local file that is created. As a result, the media core does not know what
	  format the file is, and the file is ignored. Modifying the file outside of the
	  media core is bad, as we would not be able to update the internal
	  ast_bucket_file's path.

	  At the same time, we do not want to pass the extension out in the file_path
	  parameter in ast_media_cache_retrieve. This parameter is intended to be fed
	  into the media core; if we passed the extension, all callers would have to
	  strip it off.

	  Thus, this patch does the following:
	  * If there is an extension specified in the URL, we append it to the local
	    file name (if a preferred file name isn't specified), and we store that
	    in the local file path.
	  * The extension, however, is stripped off of the file_path parameter passed
	    back out of ast_media_cache_retrieve.

	  Second, this patch causes stale items to be completely removed from the system.
	  Prior to this patch, sound files could be orphaned due to the bucket
	  referencing the file being deleted, but the file itself not being removed. This
	  is now addressed by explicitly calling ast_bucket_file_delete on the
	  bucket_file when it is deemed to be stale. Note that this only happen when we
	  know we will attempt to retrieve the resource again.

	  Finally, this patch changes the AO2 container holding media items to just use
	  a regular mutex. The usage for this container already assumed it was a plain
	  mutex, and - given that retrieval of an item can cause it to be replaced in
	  the container - a mutex makes more sense than a read/write lock.

	  Change-Id: I51667fff86ae8d2e4a663555dfa85b11e935fe0f

2014-10-25 20:21 +0000 [6bbcfb34bd]  Matt Jordan <mjordan@digium.com>

	* funcs/func_curl: Add the ability for CURL to download and store files

	  This patch adds a write option to the CURL dialplan function, allowing it to
	  CURL files and store them locally. The value 'written' to the CURL URL
	  specifies the location on disk to store the file. As an example:

	  same => n,Set(CURL(http://1.1.1.1/foo.wav)=/tmp/foo.wav)

	  Would retrieve the file foo.wav from the remote server and store it in the
	  /tmp directory.

	  Due to the potentially dangerous nature of this function call, APIs are
	  forbidden from using the write functionality unless live_dangerously is set
	  to True in asterisk.conf.

	  ASTERISK-25652 #close

	  Change-Id: I44f4ad823d7d20f04ceaad3698c5c7f653c41b0d

2016-03-23 08:59 +0000 [392341ba37]  gtjoseph <george.joseph@fairview5.com>

	* pjproject-bundled:  Cleanups for reported issues

	  PortAudio should no longer be required
	  PJSIP_MAX_PKT_LEN is now 6000
	  Older autoconf issue fixed. (CentOS 6)

	  Change-Id: I463fa9586cbe7c6b3b603289f535bd8e361611dd

2015-11-20 08:02 +0000 [ac66999971]  Francesco Castellano <francesco.castellano@messagenet.it>

	* chan_sip.c: Space after port causes unnecessary resolution attempt

	  check_via() already skips leading blanks where the sent-by address (with the
	  optional port) should be placed.

	  Since RFC 3261 allows for blanks between the port ant the Via parameters:
	  > https://tools.ietf.org/html/rfc3261#section-20.42
	  (actually it allows a lot of blanks more ;-)). I just switched from
	  ast_skip_blanks() to ast_strip() on the local copy of the string.

	  ASTERISK-21301 #close

	  Change-Id: Ie5b8fe5a07067b7c0dc9bcdd1707e99b23b02b06
2016-03-19 17:49 +0000 [1d3191b118]  gtjoseph <george.joseph@fairview5.com>

	* progdocs:  Exclude ./third-party from documentation generation

	  We don't need pjproject's documentation embedded in Asterisk's.

	  Change-Id: Iea6f5a621c0f4e3168dda3321eaab258d9f24a17

2016-03-18 20:32 +0000 [8f94f947f5]  Gianluca Merlo <gianluca.merlo@gmail.com>

	* func_aes: fix misuse of strlen on binary data

	  The encryption code for AES_ENCRYPT evaluates the length of the data to
	  be encoded in base64 using strlen. The data is binary, thus the length
	  of it can be underestimated at the first NULL character.
	  Reuse the write pointer offset to evaluate it, instead.

	  ASTERISK-25857 #close

	  Change-Id: If686b5d570473eb926693c73461177b35b13b186
2016-03-18 14:31 +0000 [a3c9a74a02]  Kevin Harwell <kharwell@digium.com>

	* chan_pjsip: ref leak when checking direct_media_glare

	  Fix the reference leak introduced in the following commit:

	  c534bd58075e2e1a1e4f3b23c435186c71b155fd

	  ASTERISK-25849

	  Change-Id: I5cfefd5ee6c1c3a1715c050330aaa10e4d2a5e85
2016-03-16 12:37 +0000 [c534bd5807]  Kevin Harwell <kharwell@digium.com>

	* chan_pjsip: transfers with direct media reinvite has wrong address/port

	  During a transfer involving direct media a race occurs between when the
	  transferer channel is swapped out, initiating rtp changes/updates, and the
	  subsequent reinvites.

	  When Alice, after speaking with Charlie (Bob is on hold), connects Bob and
	  Charlie invites are sent to each in order to establish the call between them.
	  Bob is taken off hold and Charlie is told to have his media flow through
	  Asterisk. However, if before those invites go out the bridge updates Bob's
	  and/or Charlie's rtp information with direct media data (i.e. address, port)
	  then the invite(s) will contain the remote data in the SDP instead of the
	  Asterisk data.

	  The race occurs in the native bridge glue code when updating the peer. The
	  direct_media_address can get set twice before sending out the first invite
	  during call connection. This can happen because the checking/setting of the
	  direct_media_address happened in one thread while the sending of the invite(s)
	  happened in another thread.

	  This fix removes the race condition by moving the checking/setting of the
	  direct_media_address to be in the same thread as the sending of the invites(s).
	  This serializes the checking/setting and sending so they can no longer happen
	  out of order.

	  ASTERISK-25849 #close

	  Change-Id: Idfea590175e74f401929a601dba0c91ca1a7f873

2016-03-03 04:43 +0000 [bdccb81157]  Sergio Medina Toledo <lumasepa@gmail.com>

	* res_pjsip_refer.c: Fix seg fault in process of Refer-to header.

	  The "Refer-to" header of an incoming REFER request is parsed by
	  pjsip_parse_uri().  That function requires the URI parameter to be NULL
	  terminated.  Unfortunately, the previous code added the NULL terminator by
	  overwriting memory that may not be safe.  The overwritten memory results
	  could be benign, memory corruption, or a segmentation fault.  Now the URI
	  is NULL terminated safely by copying the URI to a new chunk of memory with
	  the correct size to be NULL terminated.

	  ASTERISK-25814 #close

	  Change-Id: I32565496684a5a49c3278fce06474b8c94b37342

2016-02-25 10:29 +0000 [0da36fca6b]  Leif Madsen <leif@leifmadsen.com>

	* Add initial support to build Docker images

	  This work-in-progress is the first step to being able to reliably
	  build Asterisk containers from the Asterisk source. I'm submitting
	  this based on feedback gained at AstriDevCon 2015.

	  Information about how to use this is provided in contrib/docker/README.md
	  and will result in a local Asterisk container being built right from
	  your source. I believe this can eventually be automated via
	  hub.docker.com.

	  Change-Id: Ifa070706d40e56755797097b6ed72c1e243bd0d1

2016-03-11 12:22 +0000 [810f92c9dc]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix mwi resub deadlock potential.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Stopping a scheduled event can result in a deadlock if the scheduled event
	  is running when you try to stop the event.  If you hold a lock needed by
	  the scheduled event while trying to stop the scheduled event then a
	  deadlock can happen.  The general strategy for resolving the deadlock
	  potential is to push the actual starting and stopping of the scheduled
	  events off onto the scheduler/do_monitor() thread by scheduling an
	  immediate one shot scheduled event.  Some restructuring may be needed
	  because the code may assume that the start/stop of the scheduled events is
	  immediate.

	  ASTERISK-25023 #close

	  Change-Id: I96d429c57a48861fd8bde63dd93db4e92dc3adb6

2016-03-10 17:01 +0000 [72c444ba37]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix registration timeout and expire deadlock potential.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Stopping a scheduled event can result in a deadlock if the scheduled event
	  is running when you try to stop the event.  If you hold a lock needed by
	  the scheduled event while trying to stop the scheduled event then a
	  deadlock can happen.  The general strategy for resolving the deadlock
	  potential is to push the actual starting and stopping of the scheduled
	  events off onto the scheduler/do_monitor() thread by scheduling an
	  immediate one shot scheduled event.  Some restructuring may be needed
	  because the code may assume that the start/stop of the scheduled events is
	  immediate.

	  ASTERISK-25023

	  Change-Id: I2e40de89efc8ae6e8850771d089ca44bc604b508

2016-03-09 16:26 +0000 [7ea1e181dc]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix waitid deadlock potential.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Stopping a scheduled event can result in a deadlock if the scheduled event
	  is running when you try to stop the event.  If you hold a lock needed by
	  the scheduled event while trying to stop the scheduled event then a
	  deadlock can happen.  The general strategy for resolving the deadlock
	  potential is to push the actual starting and stopping of the scheduled
	  events off onto the scheduler/do_monitor() thread by scheduling an
	  immediate one shot scheduled event.  Some restructuring may be needed
	  because the code may assume that the start/stop of the scheduled events is
	  immediate.

	  * Made always run check_pendings() under the scheduler thread so scheduler
	  ids can be checked safely.

	  ASTERISK-25023

	  Change-Id: Ia834d6edd5bdb47c163e4ecf884428a4a8b17d52

2016-03-10 12:17 +0000 [fbf8e04aed]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix t38id deadlock potential.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Stopping a scheduled event can result in a deadlock if the scheduled event
	  is running when you try to stop the event.  If you hold a lock needed by
	  the scheduled event while trying to stop the scheduled event then a
	  deadlock can happen.  The general strategy for resolving the deadlock
	  potential is to push the actual starting and stopping of the scheduled
	  events off onto the scheduler/do_monitor() thread by scheduling an
	  immediate one shot scheduled event.  Some restructuring may be needed
	  because the code may assume that the start/stop of the scheduled events is
	  immediate.

	  ASTERISK-25023

	  Change-Id: If595e4456cd059d7171880c7f354e844c21b5f5f

2016-03-08 15:08 +0000 [02458cc6fd]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix session timers deadlock potential.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Stopping a scheduled event can result in a deadlock if the scheduled event
	  is running when you try to stop the event.  If you hold a lock needed by
	  the scheduled event while trying to stop the scheduled event then a
	  deadlock can happen.  The general strategy for resolving the deadlock
	  potential is to push the actual starting and stopping of the scheduled
	  events off onto the scheduler/do_monitor() thread by scheduling an
	  immediate one shot scheduled event.  Some restructuring may be needed
	  because the code may assume that the start/stop of the scheduled events is
	  immediate.

	  ASTERISK-25023

	  Change-Id: I6d65269151ba95e0d8fe4e9e611881cde2ab4900

2016-03-09 16:34 +0000 [c7fdff2e37]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix reinviteid deadlock potential.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Stopping a scheduled event can result in a deadlock if the scheduled event
	  is running when you try to stop the event.  If you hold a lock needed by
	  the scheduled event while trying to stop the scheduled event then a
	  deadlock can happen.  The general strategy for resolving the deadlock
	  potential is to push the actual starting and stopping of the scheduled
	  events off onto the scheduler/do_monitor() thread by scheduling an
	  immediate one shot scheduled event.  Some restructuring may be needed
	  because the code may assume that the start/stop of the scheduled events is
	  immediate.

	  ASTERISK-25023

	  Change-Id: I9c11b9d597468f63916c99e1dabff9f4a46f84c1

2016-03-07 13:21 +0000 [69810b306d]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix autokillid deadlock potential.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Stopping a scheduled event can result in a deadlock if the scheduled event
	  is running when you try to stop the event.  If you hold a lock needed by
	  the scheduled event while trying to stop the scheduled event then a
	  deadlock can happen.  The general strategy for resolving the deadlock
	  potential is to push the actual starting and stopping of the scheduled
	  events off onto the scheduler/do_monitor() thread by scheduling an
	  immediate one shot scheduled event.  Some restructuring may be needed
	  because the code may assume that the start/stop of the scheduled events is
	  immediate.

	  * Fix clearing autokillid in __sip_autodestruct() even though we could
	  reschedule.

	  ASTERISK-25023

	  Change-Id: I450580dbf26e2e3952ee6628c735b001565c368f

2016-03-09 16:32 +0000 [f484ddbdfe]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix packet retransid deadlock potential.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Stopping a scheduled event can result in a deadlock if the scheduled event
	  is running when you try to stop the event.  If you hold a lock needed by
	  the scheduled event while trying to stop the scheduled event then a
	  deadlock can happen.  The general strategy for resolving the deadlock
	  potential is to push the actual starting and stopping of the scheduled
	  events off onto the scheduler/do_monitor() thread by scheduling an
	  immediate one shot scheduled event.  Some restructuring may be needed
	  because the code may assume that the start/stop of the scheduled events is
	  immediate.

	  * Fix retrans_pkt() to call check_pendings() with both the owner channel
	  and the private objects locked as required.

	  * Refactor dialog retransmission packet list to safely remove packet
	  nodes.  The list nodes are now ao2 objects.  The list has a ref and the
	  scheduled entry has a ref.

	  ASTERISK-25023

	  Change-Id: I50926d81be53f4cd3d572a3292cd25f563f59641

2016-03-07 18:28 +0000 [67c79c326d]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix provisional_keepalive_sched_id deadlock.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Stopping a scheduled event can result in a deadlock if the scheduled event
	  is running when you try to stop the event.  If you hold a lock needed by
	  the scheduled event while trying to stop the scheduled event then a
	  deadlock can happen.  The general strategy for resolving the deadlock
	  potential is to push the actual starting and stopping of the scheduled
	  events off onto the scheduler/do_monitor() thread by scheduling an
	  immediate one shot scheduled event.  Some restructuring may be needed
	  because the code may assume that the start/stop of the scheduled events is
	  immediate.

	  ASTERISK-25023

	  Change-Id: I98a694fd42bc81436c83aa92de03226e6e4e3f48

2016-03-09 11:22 +0000 [76be7093cd]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Adjust how dialog_unlink_all() stops scheduled events.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  * Make dialog_unlink_all() unschedule all items at once in the sched
	  thread.

	  ASTERISK-25023

	  Change-Id: I7743072fb228836e8228b72f6dc46c8cc50b3fb4

2016-03-10 21:54 +0000 [52f0932e4c]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Clear scheduled immediate events on unload.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  The reordering of chan_sip's shutdown is to handle any immediate events
	  that get put onto the scheduler so resources aren't leaked.  The typical
	  immediate events at this time are going to be concerned with stopping
	  other scheduled events.

	  ASTERISK-25023

	  Change-Id: I3f6540717634f6f2e84d8531a054976f2bbb9d20

2016-03-15 14:51 +0000 [0987a11cce]  Richard Mudgett <rmudgett@digium.com>

	* sip/dialplan_functions.c: Fix /channels/chan_sip/test_sip_rtpqos crash.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  Delaying destruction of the chan_sip sip_pvt structures caused the
	  /channels/chan_sip/test_sip_rtpqos unit test to crash.  That test
	  registers a special test ast_rtp_engine with the rtp engine module.  When
	  the unit test completes it cleans up by unregistering the test
	  ast_rtp_engine and exits.  Since the delayed destruction of the sip_pvt
	  happens after the unit test returns, the destructor tries to call the rtp
	  engine destroy callback of the test ast_rtp_engine auto variable which no
	  longer exists on the stack.

	  * Change the test ast_rtp_engine auto variable to a static variable.  Now
	  the variable can still exist after the unit test exits so the delayed
	  sip_pvt destruction can complete successfully.

	  ASTERISK-25023

	  Change-Id: I61e34a12d425189ef7e96fc69ae14993f82f3f13

2016-03-07 15:50 +0000 [9a7cfa2b61]  Richard Mudgett <rmudgett@digium.com>

	* sched.c: Ensure oldest expiring entry runs first.

	  This patch is part of a series to resolve deadlocks in chan_sip.c.

	  * Updated sched unit test to check new behavior.

	  ASTERISK-25023

	  Change-Id: Ib69437327b3cda5e14c4238d9ff91b2531b34ef3

2016-03-15 13:31 +0000 [7964e260d3]  Andrew Nagy <andrew.nagy@the159.com>

	* app_stasis: Don't hang up if app is not registered

	  This prevents pbx_core from hanging up the channel if the app isn't
	  registered.

	  ASTERISK-25846 #close

	  Change-Id: I63216a61f30706d5362bc0906b50b6f0544aebce
2016-03-07 18:56 +0000 [cb97198ca6]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Simplify sip_pvt destructor call levels.

	  Remove destructor calling destroy_it calling really_destroy_it
	  for no benefit.  Just make the destructor the really_destroy_it
	  function.

	  Change-Id: Idea0d47b27dd74f2488db75bcc7f353d8fdc614a

2016-03-04 18:25 +0000 [8be01398d9]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Made sip_reinvite_retry() call sip_pvt_lock_full().

	  Change-Id: I90f04208a089f95488a2460185a8dbc3f6acca12

2016-03-14 08:59 +0000 [4df7b3ae80]  Joshua Colp <jcolp@digium.com>

	* build: Add configure check for proto field of PJSIP TLS transport setting.

	  Older versions of PJSIP do not have the proto field on the TLS transport
	  setting structure. This change adds a configure check so even if it is
	  not present we will still be able to build.

	  Change-Id: Ibf3f47befb91ed1b8194bf63888baa6fee05aba9

2016-03-12 16:02 +0000 [0af6b5de62]  gtjoseph <george.joseph@fairview5.com>

	* build_system:  Split COMPILE_DOUBLE from DONT_OPTIMIZE

	  I can't ever recall actually needing the intermediate files or the checking
	  that a double compile produces.  What I CAN remember is every DONT_OPTIMIZE
	  build needing 3 invocations of gcc instead of 1 just to do the checks and
	  produce those intermediate files.

	  Having said that, Richard pointed out that the reason for the double compile
	  was that there were cases in the past where a submitted patch failed to compile
	  because the submitter never tried it with the optimizations turned on.

	  To get the best of both worlds, COMPILE_DOUBLE has been split into its own
	  option.  If DONT_OPTIMIZE is turned on, COMPILE_DOUBLE will also be selected
	  BUT you can then turn it off if all you need are the debugging symbols.  This
	  way you have to make an informed decision about disabling COMPILE_DOUBLE.

	  To allow COMPILE_DOUBLE to be both auto-selected and turned off, a new feature
	  was added to menuselect.  The <use> element can now contain an "autoselect"
	  attribute which will turn the used member on but not create a hard dependency.
	  The cflags.xml implementation for COMPILE_DOUBLE looks like this...

	  <member name="DONT_OPTIMIZE" displayname="Disable Optimizations ...">
	  	<use autoselect="yes">COMPILE_DOUBLE</use>
	  	<support_level>core</support_level>
	  </member>
	  <member name="COMPILE_DOUBLE" displayname="Pre-compile with ...>
	  	<depend>DONT_OPTIMIZE</depend>
	  	<support_level>core</support_level>
	  </member>

	  When DONT_OPTIMIZE is turned on, COMPILE_DOUBLE is turned on because
	  of the use.
	  When DONT_OPTIMIZE is turned off, COMPILE_DOUBLE is turned off because
	  of the depend.
	  When COMPILE_DOUBLE is turned on, DONT_OPTIMIZE is turned on because
	  of the depend.
	  When COMPILE_DOUBLE is turned off, DONT_OPTIMIZE is left as is because
	  it only uses COMPILE_DOUBLE, it doesn't depend on it.

	  I also made a few tweaks to the ncurses implementation to move things
	  left a bit to allow longer descriptions.

	  Change-Id: Id49ca930ac4b5ec4fc2d8141979ad888da7b1611

2016-03-10 13:09 +0000 [638133131a]  gtjoseph <george.joseph@fairview5.com>

	* pjproject:  Pass (dont_)optimize flags to pjproject and fix pjsua

	  The pjproject Makefile now uses the Asterisk optimization flags which
	  are determined by the setting of the DONT_OPTMIZE menuselect flag.
	  The Makefile was also restructured so a change to the top level
	  menuselect.makeopts will result in a rebuild of pjproject.

	  Also, "--disable-resample" was removed from the pjproject configure
	  options.  Without resample, pjsua (which is used by the testsuite)
	  can't make audio calls.  When it can't, it segfaults.

	  Change-Id: I24b0a4d0872acef00ed89b3c527a713ee4c2ccd4

2016-03-11 16:03 +0000 [dcb25bb057]  Walter Doekes <walter+asterisk@wjd.nu>

	* app_chanspy: Fix occasional deadlock with ChanSpy and Local channels.

	  Channel masquerading had a conflict with autochannel locking.

	  When locking autochannel->channel, the channel is fetched from the
	  autochannel and then locked. During the fetch, the autochannel -- which
	  has no locks itself -- can be modified by someone who owns the channel
	  lock. That means that the value of autochan->channel cannot be trusted
	  until you hold the lock.

	  In practice, this caused problems with Local channels getting
	  masqueraded away while the ChanSpy attempted to get info from that
	  channel. The old channel which was about to get removed got locked, but
	  the new (replaced) channel got unlocked (no-op). Because the replaced
	  channel was now locked (and would never get unlocked), it couldn't get
	  removed from the channel list in a timely manner, and would now cause
	  deadlocks when iterating over the channel list.

	  This change checks the autochannel after locking the channel for changes
	  to the autochannel. If the channel had been changed, the lock is
	  reobtained on the new channel.

	  In theory it seems possible that after this fix, the lock attempt on the
	  old (wrong) channel can be on an already destroyed lock, maybe causing
	  a crash. But that hasn't been observed in the wild and is harder induce
	  than the current deadlock.

	  Thanks go to Filip Frank for suggesting a fix similar to this and
	  especially to IRC user hexanol for pointing out why this deadlock was
	  possible and testing this fix. And to Richard for catching my rookie
	  while loop mistake ;)

	  ASTERISK-25321 #close

	  Change-Id: I293ae0014e531cd0e675c3f02d1d118a98683def

2016-03-07 21:34 +0000 [fb28049de2]  gtjoseph <george.joseph@fairview5.com>

	* pjproject_bundled: Remove --with-external-pa from configure options.

	  Not sure why it was there in the first place as we already specify
	  --disable-sound.

	  Change-Id: Ia80a40e8b1e1acc287955ab11ba1fbd0c7d4cff9

2016-03-06 14:38 +0000 [d2eb65f71e]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Strip spaces from items parsed from comma-separated lists

	  Configurations like "aors = a, b, c" were either ignoring everything after "a"
	  or trying to look up " b".  Same for mailboxes,  ciphers, contacts and a few
	  others.

	  To fix, all the strsep(&copy, ",") calls have been wrapped in ast_strip.  To
	  facilitate this, ast_strip, ast_skip_blanks and ast_skip_nonblanks were
	  updated to handle null pointers.

	  In some cases, an ast_strlen_zero() test was added to skip consecutive commas.

	  There was also an attempt to ast_free an ast_strdupa'd string in
	  ast_sip_for_each_aor which was causing a SEGV.  I removed it.

	  Although this issue was reported for realtime, the issue was in the res_pjsip
	  modules so all config mechanisms were affected.

	  ASTERISK-25829 #close
	  Reported-by: Mateusz Kowalski

	  Change-Id: I0b22a2cf22a7c1c50d4ecacbfa540155bec0e7a2

2016-03-07 02:02 +0000 [f690c105f3]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* res_odbc_transaction: fix some format tab

	  Change-Id: I265e4ac47c629c9a63dd86b59df82a7ab3c64384

2016-02-17 22:58 +0000 [0ec9fe5421]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* main/cli.c: Refactor function to print seconds formatted

	  Refactor and created function ast_cli_print_timestr_fromseconds to print
	  seconds formatted:  year(s) week(s) day(s) hour(s) second(s)

	  This function now is used in addons/cdr_mysql.c,cdr_pgsql.c, main/cli.c,
	  res_config_ldap.c, res_config_pgsql.c.

	  Change-Id: Ibeb8634102cd11d3f8623398b279cb731bcde36c

2016-03-04 20:37 +0000 [471ff375fd]  gtjoseph <george.joseph@fairview5.com>

	* install_prereq: Add packages for bundled pjproject

	  RedHat/CentOS needs python-devel
	  Debian/Ubuntu needs automake, libsrtp-dev and python-dev

	  Ubuntu also needed libncurses5-dev for cmenuselect so while not
	  needed for pjproject, I adedd it anyway.

	  Change-Id: Idf5fa16e2d87c687439621507e122cb9461d7089

2016-02-24 17:25 +0000 [2b9849625c]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_caller_id: Anonymize 'From' when caller id presentation is prohibited

	  Per RFC3325, the 'From' header is now anonymized on outgoing calls when
	  caller id presentation is prohibited.

	  TID = trust_id_outbound
	  PRO = Set(CALLERID(pres)=prohib)
	  USR = endpoint/from_user
	  DOM = endpoint/from_domain
	  PAI = YES(privacy=off), NO(not sent), PRI(privacy=full) (assumes send_pai=yes)

	  Conditions          |Result
	  --------------------|----------------------------------------------------
	  TID PRO USR DOM     |PAI    FROM
	  --------------------|----------------------------------------------------
	  Y   Y   abc def.ghi |PRI    "Anonymous" <sip:abc@def.ghi>
	  Y   Y   abc         |PRI    "Anonymous" <sip:abc@anonymous.invalid>
	  Y   Y       def.ghi |PRI    "Anonymous" <sip:anonymous@def.ghi>
	  Y   Y               |PRI    "Anonymous" <sip:anonymous@anonymous.invalid>

	  Y   N   abc def.ghi |YES    <sip:abc@def.ghi>
	  Y   N   abc         |YES    <sip:abc@<ip_address>>
	  Y   N       def.ghi |YES    "Caller Name" <sip:<caller_exten>@def.ghi>
	  Y   N               |YES    "Caller Name" <sip:<caller_exten>@<ip_address>>

	  N   Y   abc def.ghi |NO     "Anonymous" <sip:abc@def.ghi>
	  N   Y   abc         |NO     "Anonymous" <sip:abc@anonymous.invalid>
	  N   Y       def.ghi |NO     "Anonymous" <sip:anonymous@def.ghi>
	  N   Y               |NO     "Anonymous" <sip:anonymous@anonymous.invalid>

	  N   N   abc def.ghi |YES    <sip:abc@def.ghi>
	  N   N   abc         |YES    <sip:abc@<ip_address>>
	  N   N       def.ghi |YES    "Caller Name" <sip:<caller_exten>@def.ghi>
	  N   N               |YES    "Caller Name" <sip:<caller_exten>@<ip_address>>

	  ASTERISK-25791 #close
	  Reported-by: Anthony Messina

	  Change-Id: I2c82a5ca1413c2c00fb62ea95b0ae8e97af54dc9

2016-03-03 17:34 +0000 [37472f7398]  gtjoseph <george.joseph@fairview5.com>

	* third_party/Makefile.rules:  Replace unsupported != operator with $(shell ...)

	  Apparently the != operator is fairly new so I've replaced it with
	  the old $(shell ...) syntax.

	  Change-Id: I16b2e1878a4f91e7e9740abd427f9639f933c479
	  Reported-by: Richard Mudgett

2016-01-23 15:50 +0000 [195100e770]  gtjoseph <george.joseph@fairview5.com>

	* loader: Retry dlopen when loading fails

	  Although we use the RTLD_LAZY flag when calling dlopen
	  the first time on a module, this only defers resolution
	  for function calls.  Pointer references to functions are
	  determined at link time so dlopen expects them to be there.
	  Since we don't cross-module link, pointers to functions
	  in other modules won't be available and dlopen will fail.

	  Doing a "hardened" build also causes problems because it
	  typically sets "-z now" on the ld command line which
	  overrides RTLD_LAZY at run time.

	  If the failing module isn't a GLOBAL_SYMBOLS module, then
	  dlopen will be called again after all the GLOBAL_SYMBOLS
	  modules have been loaded and they'll eventually resolve.

	  If the calling module IS a GLOBAL_SYMBOLS module itself
	  and a third module depends on it, then there's an issue
	  because the second time through the dlopen loop,
	  GLOBAL_SYMBOLS modules aren't given any special treatment
	  and since the order in which dlopen is called isn't
	  deterministic, the dependent may again be tried before the
	  module it needs is loaded.

	  Simple solution:  Save modules that fail load_resource
	  because of a dlopen error in a list and retry them
	  immediately after the first pass. Keep retrying until
	  the failed list is empty or we reach a #defined max
	  retries. Error messages are suppressed until the final
	  pass which also gets rid of those confusing error messages
	  about module failures that are later corrected.

	  Change-Id: Iddae1d97cd2f00b94e61662447432765755f64bb

2016-03-01 16:18 +0000 [15c5743ac1]  Kevin Harwell <kharwell@digium.com>

	* bridge.c: Crash during attended transfer when missing a local channel half

	  It's possible for the transferer channel to get hung up early during the
	  attended transfer process. For instance, a phone may send a "bye" immediately
	  upon receiving a sip notify that contains a sip frag 100 (I'm looking at you
	  Jitsi). When this occurs a race begins between the transferer being hung up
	  and completion of the transfer code.

	  If the channel hangs up too early during a transfer involving stasis bridging
	  for instance, then when the created local channel goes to look up its swap
	  channel (and associated datastore) it can't find it (since it is no longer in
	  the bridge) thus it fails to enter the stasis application. Consequently, the
	  created local channel(s) hang up as well. If the timing is just right then the
	  bridging code attempts to add the message link with missing local channel(s).
	  Hence the crash.

	  Unfortunately, there is no great way to solve the problem of the unexpected
	  "bye". While we can't guarantee we won't receive an early hangup, and in this
	  case still fail to enter the stasis application, we can make it so asterisk
	  does not crash.

	  This patch does just that by locking the local channel structure, checking
	  that the local channel's peer has not been lost, and then continuing. This
	  keeps the local channel's peer from being ripped out from underneath it by
	  the local/unreal hangup code while attempting to set the stasis message link.

	  ASTERISK-25771

	  Change-Id: Ie6d6061e34c7c95f07116fffac9a09e5d225c880

2016-03-01 18:08 +0000 [0d2ccbca62]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_refer.c: Delay sending the initial SIP Notify with frag 100

	  During the transfer process, some phones (okay it was the Jitsi softphone,
	  but maybe others are out there) send a "bye" immediately after receiving a
	  SIP Notify. When a "bye" is received early for some types of transfers the
	  transferer channel may no longer be available during late stage transfer
	  processing.

	  For instance, during an attended transfer involving stasis bridging at one
	  point the created local channel looks for an associated swap channel in
	  order to retrieve the stasis application name. If the transferer has hung
	  up then the local channel will fail to find it. The local channel then has
	  no way to know which stasis app to enter, so it fails and hangs up as well.
	  Thus the transfer does not complete as expected.

	  This patch delays the sending of the initial notify in order to give the
	  transfer process enough time to gather the necessary data for a successful
	  transfer.

	  ASTERISK-25771

	  Change-Id: I09cfc9a5d6ed4c007bc70625e0972b470393bf16

2016-03-03 08:26 +0000 [6af7fc4c37]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_dtmf_info: NULL terminate the message body.

	  PJSIP does not ensure that when printing the message body the
	  buffer will be NULL terminated. This is problematic when searching
	  for the signal and duration values of the DTMF.

	  This change ensures the buffer is always NULL terminated.

	  Change-Id: I52653a1a60c93092d06af31a27408d569cc98968

2016-03-01 20:03 +0000 [b8b7c2e428]  gtjoseph <george.joseph@fairview5.com>

	* alembic: Fix downgrade and tweak for sqlite

	  Downgrade had a few issues.  First there was an errant 'update' statement in
	  add_auto_dtmf_mode that looks like it was a copy/paste error.  Second, we
	  weren't cleaning up the ENUMs so subsequent upgrades on postgres failed
	  because the types already existed.

	  For sqlite...  sqlite doesn't support ALTER or DROP COLUMN directly.
	  Fortunately alembic batch_operations takes care of this for us if we
	  use it so the alter and drops were converted to use batch operations.

	  Here's an example downgrade:

	      with op.batch_alter_table('ps_endpoints') as batch_op:
	          batch_op.drop_column('tos_audio')
	          batch_op.drop_column('tos_video')
	          batch_op.add_column(sa.Column('tos_audio', yesno_values))
	          batch_op.add_column(sa.Column('tos_video', yesno_values))
	          batch_op.drop_column('cos_audio')
	          batch_op.drop_column('cos_video')
	          batch_op.add_column(sa.Column('cos_audio', yesno_values))
	          batch_op.add_column(sa.Column('cos_video', yesno_values))

	      with op.batch_alter_table('ps_transports') as batch_op:
	          batch_op.drop_column('tos')
	          batch_op.add_column(sa.Column('tos', yesno_values))
	      # Can't cast integers to YESNO_VALUES, so dropping and adding is required
	          batch_op.drop_column('cos')
	          batch_op.add_column(sa.Column('cos', yesno_values))

	  Upgrades from base to head and downgrades from head to base were tested
	  repeatedly for postgresql, mysql/mariadb, and sqlite3.

	  Change-Id: I862b0739eb3fd45ec3412dcc13c2340e1b7baef8

2016-03-02 15:55 +0000 [7b71bca8a4]  gtjoseph <george.joseph@fairview5.com>

	* config_transport:  Fix objects returned by ast_sip_get_transport_states

	  ast_sip_get_transport_states was returning a container of internal_state
	  objects instead of ast_sip_transport_state objects.  This was causing
	  transport lookups to fail, most noticably in res_pjsip_nat, which
	  couldn't find the correct external addresses.  This was causing contacts
	  to go out with internal ip addresses.

	  ASTERISK-25830 #close
	  Reported-by: Sean Bright

	  Change-Id: I1aee6a2fd46c42e8dd0af72498d17de459ac750e

2016-03-02 11:17 +0000 [0a3f0e85ac]  Scott Griepentrog <scott@griepentrog.com>

	* CHAOS: cleanup possible null vars on msg alloc failure

	  In message.c, if msg_alloc fails to init the string field,
	  vars may be null, so use a null tolerant cleanup.

	  In res_pjsip_messaging.c, if msg_data_create fails, mdata
	  will be null, so use a null tolerant cleanup.

	  ASTERISK-25323

	  Change-Id: Ic2d55c2c3750d5616e2a05ea92a19c717507ff56

2016-03-02 09:34 +0000 [60aa871be3]  Scott Griepentrog <scott@griepentrog.com>

	* CHAOS: prevent crash on failed strdup

	  This patch avoids crashing on a null pointer
	  if the strdup() allocation fails.

	  ASTERISK-25323

	  Change-Id: I3f67434820ba53b53663efd6cbb42749f4f6c0f5

2016-02-29 18:11 +0000 [0bdbf0d882]  Richard Mudgett <rmudgett@digium.com>

	* func_callerid.c: Update REDIRECTING reason documentation.

	  Change-Id: I6e8d39b0711110a4bceafa652e58b30465e28386

2016-02-26 18:57 +0000 [25de01f301]  Richard Mudgett <rmudgett@digium.com>

	* SIP diversion: Fix REDIRECTING(reason) value inconsistencies.

	  Previous chan_sip behavior:

	  Before this patch chan_sip would always strip any quotes from an incoming
	  reason and pass that value up as the REDIRECTING(reason).  For an outgoing
	  reason value, chan_sip would check the value against known values and
	  quote any it didn't recognize.  Incoming 480 response message reason text
	  was just assigned to the REDIRECTING(reason).

	  Previous chan_pjsip behavior:

	  Before this patch chan_pjsip would always pass the incoming reason value
	  up as the REDIRECTING(reason).  For an outgoing reason value, chan_pjsip
	  would send the reason value as passed down.

	  With this patch:

	  Both channel drivers match incoming reason values with values documented
	  by REDIRECTING(reason) and values documented by RFC5806 regardless of
	  whether they are quoted or not.  RFC5806 values are mapped to the
	  equivalent REDIRECTING(reason) documented value and is set in
	  REDIRECTING(reason).  e.g., an incoming RFC5806 'unconditional' value or a
	  quoted string version ('"unconditional"') is converted to
	  REDIRECTING(reason)'s 'cfu' value.  The user's dialplan only needs to deal
	  with 'cfu' instead of any of the aliases.

	  The incoming 480 response reason text supported by chan_sip checks for
	  known reason values and if not matched then puts quotes around the reason
	  string and assigns that to REDIRECTING(reason).

	  Both channel drivers send outgoing known REDIRECTING(reason) values as the
	  unquoted RFC5806 equivalent.  User custom values are either sent as is or
	  with added quotes if SIP doesn't allow a character within the value as
	  part of a RFC3261 Section 25.1 token.  Note that there are still
	  limitations on what characters can be put in a custom user value.  e.g.,
	  embedding quotes in the middle of the reason string is silly and just
	  going to cause you grief.

	  * Setting a REDIRECTING(reason) value now recognizes RFC5806 aliases.
	  e.g., Setting REDIRECTING(reason) to 'unconditional' is converted to the
	  'cfu' value.

	  * Added missing malloc() NULL return check in res_pjsip_diversion.c
	  set_redirecting_reason().

	  * Fixed potential read from a stale pointer in res_pjsip_diversion.c
	  add_diversion_header().  The reason string needed to be copied into the
	  tdata memory pool to ensure that the string would always be available.
	  Otherwise, if the reason string returned by reason_code_to_str() was a
	  user's reason string then the string could be freed later by another
	  thread.

	  Change-Id: Ifba83d23a195a9f64d55b9c681d2e62476b68a87

2016-02-26 18:54 +0000 [8c8ef4efb0]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_send_to_voicemail.c: Allow either quoted or not send_to_vm reason.

	  Change-Id: Id6350b3c7d4ec8df7ec89863566645e2b0f441fd

2016-02-29 20:41 +0000 [75ec137e91]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_send_to_voicemail.c: Fix off-nominal double channel unref.

	  * Fix double unref of other_party channel in off nominal path.

	  * This is unlikely to be a real problem.  However, for safety,
	  in handle_incoming_request() keep the datastore ref with the
	  other_party channel ref until we are finished with the other_party
	  channel.

	  Change-Id: I78f22547bf0bb99fb20814ceab75952bd857f821

2016-01-18 21:54 +0000 [3173e91bab]  gtjoseph <george.joseph@fairview5.com>

	* build-system: Allow building with static pjproject

	  Background here:
	  http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html

	  From CHANGES:
	   * To help insure that Asterisk is compiled and run with the same known
	     version of pjproject, a new option (--with-pjproject-bundled) has been
	     added to ./configure.  When specified, the version of pjproject specified
	     in third-party/versions.mak will be downloaded and configured.  When you
	     make Asterisk, the build process will also automatically build pjproject
	     and Asterisk will be statically linked to it.  Once a particular version
	     of pjproject is configured and built, it won't be configured or built
	     again unless you run a 'make distclean'.

	     To facilitate testing, when 'make install' is run, the pjsua and pjsystest
	     utilities and the pjproject python bindings will be installed in
	     ASTDATADIR/third-party/pjproject.

	     The default behavior remains building with the shared pjproject
	     installation, if any.

	  Building:

	     All you have to do is include the --with-pjproject-bundled option on
	     the ./configure command line (and remove any existing --with-pjproject
	     option if specified).  Everything else is automatic.

	  Behind the scenes:

	     The top-level Makefile was modified to include 'third-party' in the
	     list of MOD_SUBDIRS.

	     The third-party directory was created to contain any third party
	     packages that may be needed in the future.  Its Makefile automatically
	     iterates over any subdirectories passing on targets.

	     The third-party/pjproject directory was created to house the pjproject
	     source distribution.  Its Makefile contains targets to download, patch
	     configure, generate dependencies, compile libs, apps and python bindings,
	     sanitized build.mak and generate a symbols list.

	     When bootstrap.sh is run, it automatically includes the configure.m4
	     file in third-party/pjproject.  This file has a macro to download and
	     conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
	     and PJPROJECT_BUNDLED.  It also tests for the capabilities like
	     PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
	     trying to compile.  Of course, bootstrap.sh is only run once and the
	     configure file is incldued in the patch.

	     When configure is run with the new options, the macro in configure.m4
	     triggers the download, patch, conifgure and tests.  No compilation is
	     performed at this time.  The downloaded tarball is cached in /tmp so
	     it doesn't get downloaded again on a distclean.

	     When make is run in the top-level Asterisk source directory, it will
	     automatically descend all the subdirectories in third_party just as it
	     does for addons, apps, etc.  The top-level Makefile makes sure that
	     the 'third-party' is built before 'main' so that dependencies from the
	     other directories are built first.

	     When main does build, a new shared library (libasteriskpj) is created that
	     links statically to the pjproject .a files and exports all their symbols.
	     The asterisk binary links to that, just as it does with libasteriskssl.

	     When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
	     python bindings are installed in ASTDATADIR/third-party/pjproject.  This
	     will facilitate testing, including running the testsuite which will be
	     updated to check that directory for the pjsua module ahead of the system
	     python library.

	  Modules should continue to depend on pjproject if they use pjproject APIs
	  directly.  They should not care about the implementation.  No changes to any
	  res_pjsip modules were made.

	  Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103

2016-02-22 16:59 +0000 [2dae4a1ccf]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Fix T.38 issues caused by leaving a bridge.

	  chan_sip could not handle AST_T38_TERMINATED frames being sent to it when
	  the channel left the bridge.  The action resulted in overlapping outgoing
	  reINVITEs.  The testsuite tests/fax/sip/directmedia_reinvite_t38 was not
	  happy.

	  * Force T.38 to be remembered as locally bridged.  Now when the channel
	  leaves the native RTP bridge after T.38, the channel remembers that it has
	  already reINVITEed the media back to Asterisk.  It just needs to terminate
	  T.38 when the AST_T38_TERMINATED arrives.

	  * Prevent redundant AST_T38_TERMINATED from causing problems.  Redundant
	  AST_T38_TERMINATED frames could cause overlapping outgoing reINVITEs if
	  they happen before the T.38 state changes to disabled.  Now the T.38 state
	  is set to disabled before the reINVITE is sent.

	  ASTERISK-25582 #close

	  Change-Id: I53f5c6ce7d90b3f322a942af1a9bcab6d967b7ce

2016-02-18 18:27 +0000 [bf29a4e2e6]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_t38.c: Back out part of an earlier fix attempt.

	  This backs out item 4 of the 4875e5ac32f5ccad51add6a4216947bfb385245d
	  commit.  Item 4 added the t38_bye_supplement.  Unfortunately, the frame
	  that it puts into the bridge may or may not be processed by the time the
	  bridged peer is kicked out of the bridge.  If it is processed then all is
	  well.  However, if it is not processed then that channel is stuck in fax
	  mode until it hangs up or maybe if it joins another bridge for T.38
	  faxing.

	  ASTERISK-25582

	  Change-Id: Ib20a03ecadf1bf8a0dcadfadf6c2f2e60919a9f7

2016-02-22 13:54 +0000 [c7d45b84f9]  Richard Mudgett <rmudgett@digium.com>

	* bridge core: Add owed T.38 terminate when channel leaves a bridge.

	  The channel is now going to get T.38 terminated when it leaves the
	  bridging system and the bridged peers are going to get T.38 terminated as
	  well.

	  ASTERISK-25582

	  Change-Id: I77a9205979910210e3068e1ddff400dbf35c4ca7

2016-02-19 16:01 +0000 [0e296563d7]  Richard Mudgett <rmudgett@digium.com>

	* channel api: Create is_t38_active accessor functions.

	  ASTERISK-25582

	  Change-Id: I69451920b122de7ee18d15bb231c80ea7067a22b

2016-02-19 19:06 +0000 [86f7336c91]  Richard Mudgett <rmudgett@digium.com>

	* bridge_channel: Don't settle owed events on an optimization.

	  Local channel optimization could cause DTMF digits to be duplicated.
	  Pending DTMF end events would be posted to a bridge when the local channel
	  optimizes out and is replaced by the channel further down the chain.  When
	  the real digit ends, the channel would get another DTMF end posted to the
	  bridge.

	  A -- LocalA;1/n -- LocalA;2/n -- LocalB;1 -- LocalB;2 -- B

	  1) LocalA has the /n flag to prevent optimization.
	  2) B is sending DTMF to A through the local channel chain.
	  3) When LocalB optimizes out it can move B to the position of LocalB;1
	  4) Without this patch, when B swaps with LocalB;1 then LocalB;1 would
	  settle an owed DTMF end to the bridge toward LocalA;2.
	  5) When B finally ends its DTMF it sends the DTMF end down the chain.
	  6) Without this patch, A would hear the DTMF digit end when LocalB
	  optimizes out and when B ends the original digit.

	  ASTERISK-25582

	  Change-Id: I1bbd28b8b399c0fb54985a5747f330a4cd2aa251

2016-02-22 12:15 +0000 [128c96456c]  Richard Mudgett <rmudgett@digium.com>

	* channel.c: Route all control frames to a channel through the same code.

	  Frame hooks can conceivably return a control frame in exchange for an
	  audio frame inside ast_write().  Those returned control frames were not
	  handled quite the same as if they were sent to ast_indicate().  Now it
	  doesn't matter if you use ast_write() to send an AST_FRAME_CONTROL to a
	  channel or ast_indicate().

	  ASTERISK-25582

	  Change-Id: I5775f41421aca2b510128198e9b827bf9169629b

2016-02-25 15:13 +0000 [4422905218]  gtjoseph <george.joseph@fairview5.com>

	* sorcery:  Refactor create, update and delete to better deal with caches

	  The ast_sorcery_create, update and delete function have been refactored
	  to better deal with caches and errors.

	  The action is now called on all non-caching wizards first. If ANY succeed,
	  the action is called on all caching wizards and the observers are notified.
	  This way we don't put something in the cache (or update or delete) before
	  knowing the action was performed in at least 1 backend and we only call the
	  observers once even if there were multiple writable backends.

	  ast_sorcery_create was never adding to caches in the first place which
	  was preventing contacts from getting added to a memory_cache when they
	  were created.  In turn this was causing memory_cache to emit errors if
	  the contact was deleted before being retrieved (which would have
	  populated the cache).

	  ASTERISK-25811 #close
	  Reported-by: Ross Beer

	  Change-Id: Id5596ce691685a79886e57b0865888458d6e7b46
2016-02-25 15:39 +0000 [acf329a3c7]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_mwi:  Turn some NOTICEs and WARNINGs into debug 1s.

	  There are a few cases where we're emitting notices or warnings
	  for things that really need neither, like a client retrying to subscribe
	  to mwi when they're not conifgured for it.  They get a 404 so there's no
	  need for non-debug messages.

	  Change-Id: I05e38a7ff6c2f2521146f4be6a79731b9864e61f
2016-02-25 14:17 +0000 [7e3e1ddf7e]  gtjoseph <george.joseph@fairview5.com>

	* res_sorcery_memory_cache:  Fix SEGV in some CLI commands

	  A few of the CLI commands weren't checking for enough arguments
	  and were SEGVing.

	  Change-Id: Ie6494132ad2fe54b4f014bcdc112a37c36a9b413

2016-02-22 19:31 +0000 [803a2fc2d5]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.h: Remove extraneous semicolons.

	  Change-Id: Ib462633d396fa941379dfef648dcd2245e350084

2016-02-23 14:57 +0000 [886ee09471]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Suppress T.38 SDP c= line if addr is the same.

	  Use the correct comparison function since we only care if the address
	  without the port is the same.

	  Change-Id: Ibf6c485f843a1be6dee58a47b33d81a7a8cbe3b0

2016-02-16 08:14 +0000 [b7970cabfa]  Christof Lauber <christof.lauber@annax.ch>

	* res_config_sqlite3: Fix crashes when reading peers from sqlite3 tables

	  Introduced realloaction of ast_str buf in sqlite3_escape functions in case
	  the returned buffer from threadstorage was actually too small.

	  Change-Id: I3c5eb43aaade93ee457943daddc651781954c445

2016-02-11 11:01 +0000 [ba8adb4ce3]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip/config_transport: Allow reloading transports.

	  The 'reload' mechanism actually involves closing the underlying
	  socket and calling the appropriate udp, tcp or tls start functions
	  again.  Only outbound_registration, pubsub and session needed work
	  to reset the transport before sending requests to insure that the
	  pjsip transport didn't get pulled out from under them.

	  In my testing, no calls were dropped when a transport was changed
	  for any of the 3 transport types even if ip addresses or ports were
	  changed. To be on the safe side however, a new transport option was
	  added (allow_reload) which defaults to 'no'.  Unless it's explicitly
	  set to 'yes' for a transport, changes to that transport will be ignored
	  on a reload of res_pjsip.  This should preserve the current behavior.

	  Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf

2016-02-19 04:30 +0000 [c00082329e]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Optionally supply fromuser/fromdomain in SIP dial string.

	  Previously you could add [!dnid] to the SIP dial string to alter the To:
	  header. This change allows you to alter the From header as well.

	  SIP dial string extra options now look like this:

	      [![touser[@todomain]][![fromuser][@fromdomain]]]

	  INCOMPATIBLE CHANGE: If you were using an exclamation mark in your To:
	  header, that is no longer possible.

	  ASTERISK-25803 #close

	  Change-Id: I2457e9ba7a89eb1da22084bab5a4d4328e189db7

2016-02-07 17:34 +0000 [f8767a8804]  gtjoseph <george.joseph@fairview5.com>

	* res_pjproject:  Add ability to map pjproject log levels to Asterisk log levels

	  Warnings and errors in the pjproject libraries are generally handled by
	  Asterisk.  In many cases, Asterisk wouldn't even consider them to be warnings
	  or errors so the messages emitted by pjproject directly are either superfluous
	  or misleading.  A good exampe of this are the level-0 errors pjproject emits
	  when it can't open a TCP/TLS socket to a client to send an OPTIONS.  We don't
	  consider a failure to qualify a UDP client an "ERROR", why should a TCP/TLS
	  client be treated any differently?

	  A config file for res_pjproject has bene added (pjproject.conf) and a new
	  log_mappings object allows mapping pjproject levels to Asterisk levels
	  (or nothing).  The defaults if no pjproject.conf file is found are the same
	  as those that were hard-coded into res_pjproject initially: 0,1 = LOG_ERROR,
	  2 = LOG_WARNING, 3,4,5 = LOG_DEBUG<level>

	  Change-Id: Iba7bb349c70397586889b8f45b8c3d6c6c8c3898

2016-02-18 10:55 +0000 [14886643c6]  Alexei Gradinari <alex2grad@gmail.com>

	* res_pjsip_outbound_publish: Fix processing 412 response

	  When Asterisk receives a 412 (Conditional Request Failed) response
	  it has to recreate publish session.
	  There is bug in res_pjsip_outbound_publish.c
	  The function sip_outbound_publish_client_alloc is called with wrong object
	  while processing 412 (Conditional Request Failed) response.
	  This patch fixes it.

	  ASTERISK-25229 #close

	  Change-Id: I3b62f2debf6bb1e5817cde7b13ea39ef2bf14359

2016-02-18 11:15 +0000 [8055d080cd]  Mark Michelson <mmichelson@digium.com>

	* Fix failing threadpool_auto_increment test.

	  The threadpool_auto_increment test fails infrequently for a couple of
	  reasons
	  * The threadpool listener was notified of fewer tasks being pushed than
	    were actually pushed
	  * The "was_empty" flag was set to an unexpected value.

	  The problem is that the test pushes three tasks into the threadpool.
	  Test expects the threadpool to essentially gather those three tasks, and
	  then distribute those to the threadpool threads. It also expects that as
	  the tasks are pushed in, the threadpool listener is alerted immediately
	  that the tasks have been pushed. In reality, a task can be distributed
	  to the threadpool threads quicker than expected, meaning that the
	  threadpool has already emptied by the time each subsequent task is
	  pushed. In addition, the internal threadpool queue can be delayed so
	  that the threadpool listener is not alerted that a task has been pushed
	  even after the task has been executed.

	  From the test's point of view, there's no way to be able to predict
	  exactly the order that task execution/listener notifications will occur,
	  and there is no way to know which listener notifications will indicate
	  that the threadpool was previously empty.

	  For this reason, the test has been updated to only check the things it
	  can check. It ensures that all tasks get executed, that the threads go
	  idle after the tasks are executed, and that the listener is told the
	  proper number of tasks that were pushed.

	  Change-Id: I7673120d74adad64ae6894594a606e102d9a1f2c

2016-02-17 13:30 +0000 [30a49b8a6a]  Richard Mudgett <rmudgett@digium.com>

	* cel.c: Fix mismatch in ast_cel_track_event() return type.

	  The return type of ast_cel_track_event() is not large enough to return all
	  64 potential bits of the event enable mask.  Fortunately, the defined CEL
	  events do not really need all 64 bits and the return value is only used to
	  determine if the requested CEL event is enabled.

	  * Made the ast_cel_track_event() return 0 or 1 only so the return value
	  can fit inside an int type instead of zero or a truncated 64 bit non-zero
	  value.

	  Change-Id: I783d932320db11a95c7bf7636a72b6fe2566904c

2016-02-16 23:37 +0000 [15aeb78c66]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: fix Calculate talktime when is first call answered

	  Fix calculate of average time for talktime is wrong when is completed the
	  first call beacuse the time for talked would be that call.

	  ASTERISK-25800 #close

	  Change-Id: I94f79028935913cd9174b090b52bb300b91b9492

2016-02-16 16:37 +0000 [62282bb8ce]  gtjoseph <george.joseph@fairview5.com>

	* res_odbc: Fix exports.in for missing symbols

	  res_odbc.exports.in was missing a few symbols.
	  Changed to wildcards.

	  Change-Id: Ieadd76df24e43ea92577f651d478a0f7b742c30c

2016-02-16 12:20 +0000 [49203628f9]  gtjoseph <george.joseph@fairview5.com>

	* res_statsd:  Fix exports.in for missing symbols

	  res_statsd.export.in was missing the _va variations of the log
	  functions causing Asterisk to crash in res_pjsip if OPTIONAL_API
	  wasn't enabled.

	  ASTERISK-25727 #close
	  Reported-by: Gergely Dömsödi

	  Change-Id: I395729f9f51bdd33c5ca757f5f96ebedad74077b

2016-02-15 21:31 +0000 [4f08e9fb64]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_config_wizard:  Add command to export primitive objects

	  A new command (pjsip export config_wizard primitives) has been added that
	  will export all the pjsip objects it created to the console or a file
	  suitable for reuse in a pjsip.conf file.

	  ASTERISK-24919 #close
	  Reported-by: Ray Crumrine

	  Change-Id: Ica2a5f494244b4f8345b0437b16d06aa0484452b

2016-02-15 15:37 +0000 [be811c4be1]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_caller_id: Fix segfault when replacing rpid or pai header

	  If the PJSIP_HEADER dialplan function adds a PAI or RPID header and send_rpid
	  or send_pai is set, res_pjsip_caller_id attemps to retrieve, parse and modify
	  the header added by the dialplan function.  Since the header added by the
	  dialplan function is generic string, there are no virtual functions to parse
	  the uri and we get a segfault when we try.  Since the modify, was really only
	  an overwrite, we now just delete the old header if it was type PJSIP_H_OTHER
	  and recreate it.

	  This raises a question for another time though:  What should happen with
	  duplicate headers?  Right now res_pjsip_header_funcs doesn't check for dups
	  so if it's session supplement is loaded after res_pjsip_caller_id's (or any
	  other module that adds headers), there'll be dups in the message.

	  ASTERISK-25337 #close

	  Change-Id: I5e296b52d30f106b822c0eb27c4c2b0e0f71c7fa

2016-02-15 13:08 +0000 [13b6c02945]  Mark Michelson <mmichelson@digium.com>

	* Fix creation race of contact_status structures.

	  It is possible when processing a SIP REGISTER request to have two
	  threads end up creating contact_status structures in sorcery.
	  contact_status is created using a "find or create" function. If two
	  threads call into this at the same time, each thread will fail to find
	  an existing contact_status, and so both will end up creating a new
	  contact status.

	  During testing, we would see sporadic failures because the
	  PJSIP_CONTACT() dialplan function would operate on a different
	  contact_status than what had been updated by res_pjsip/pjsip_options.

	  The fix here is two-fold:
	  1) The "find or create" function for contact_status now has a lock
	  around the entire operation. This way, if two threads attempt the
	  operation simultaneously, the first to get there will create the object,
	  and the second will find the object created by the first thread.

	  2) res_sorcery_memory has had its create callback updated so that it
	  will not allow for objects with duplicate IDs to be created.

	  Change-Id: I55b1460ff1eb0af0a3697b82d7c2bac9f6af5b97

2016-02-15 12:52 +0000 [5c400a0fed]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: Move where the subscription is stored to after initialized.

	  A problem arose when testing the AMI subscription listing actions where it
	  was possible for a subscription that had not been fully initialized to be
	  listed. This was problematic as the underlying listing code would crash.

	  This change makes it so the subscription tree is fully set up before it is
	  added to the list of subscriptions. This ensures that when the listing actions
	  get the subscription it is valid.

	  ASTERISK-25738 #close

	  Change-Id: Iace2b13641c31bbcc0d43a39f99aba1f340c0f48

2016-02-09 17:34 +0000 [b37555cc94]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Refactor load_module/unload_module

	  load_module was just too hairy with every step having to clean up all
	  previous steps on failure.

	  Some of the pjproject init calls have now been moved to a separate
	  load_pjsip function and the unload_pjsip function was enhanced to clean
	  up everything if an error happened at any stage of the load process.

	  In the process, a bunch of missing pj_shutdowns, serializer_pool_shutdowns
	  and ast_threadpool_shutdowns were also corrected.

	  Change-Id: I5eec711b437c35b56605ed99537ebbb30463b302

2016-02-09 22:42 +0000 [c4d9f46878]  Badalyan Vyacheslav <slavon.net@gmail.com>

	* Resources/res_phoneprov: fix memory leak and heap-use-after-free

	  * heap-use-after-free happens when we free "cfg"
	  but then use "value" which refers to it

	  * A memory leak occurs because in some cases
	  it is not released "defaults"

	  ASTERISK-25721 #close
	  Reported by: Badalyan Vyacheslav
	  Tested by: Badalyan Vyacheslav

	  Change-Id: I3807d3f4726df6864430ec144cf6265d3f538469

2016-02-11 11:21 +0000 [e5fd972d24]  Etienne Lessard (license #6394)

	* func_iconv: Ensure output strings are properly terminated.

	  ASTERISK-25272 #close
	  Reported by: Etienne Lessard
	  patches:
	   AST-25272.patch submitted by Etienne Lessard (license #6394)

	  Change-Id: Id75ad202300960a1e91afe15e319d992936ecc17

2016-02-10 16:16 +0000 [168c18737f]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Handle pjsip_dlg_create_uas deprecation

	  Pjproject has deprecated pjsip_dlg_create_uas in 2.5 and replaced it with
	  pjsip_dlg_create_uas_and_inc_lock which, as the name implies, automatically
	  increments the lock on the returned dialog.  To account for this, configure.ac
	  now detects the presence of pjsip_dlg_create_uas_and_inc_lock and res_pjsip.c
	  has an #ifdef HAVE_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK to decide whether to use
	  the original call or the new one.  If the new one was used, the ref count is
	  decremented before returning.

	  ASTERISK-25751 #close
	  Reported-by Josh Colp

	  Change-Id: I1be776b94761df03bd0693bc7795a75682615ca8

2016-02-09 20:13 +0000 [fd668670b5]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* res_config_pgsql: Show error message in reload if not connected.

	  Change-Id: I9290115a1aaadb589eb1d02eaeb502eec01b31fa

2016-02-09 23:40 +0000 [a23d01e943]  Badalyan Vyacheslav <slavon.net@gmail.com>

	* Build: Added testing compiler to support the system sanitizes

	  In older versions of the compiler was not sanitizes.
	  Compilers other than GCC can not support the Usan and TSAN
	  or have other options for *FLAGS.

	  ASTERISK-25767 #close
	  Reported by: Badalyan Vyacheslav
	  Tested by: Badalyan Vyacheslav

	  Change-Id: Iefce6608221fa87884b82ae3cb5649b7b1804916

2016-02-09 20:57 +0000 [c7186c7f0a]  Badalyan Vyacheslav <v.badalyan@open-bs.ru>

	* Build: Fix menuselect USAN conflicts

	  USAN can be used together with other sanitizers.

	  Reported by: Badalyan Vyacheslav
	  Tested by: Badalyan Vyacheslav

	  Change-Id: I3bffa350d70965c3026651dba3a12414d0aaa45f

2016-02-09 14:21 +0000 [68643f83cd]  Corey Farrell <git@cfware.com>

	* Simplify and fix conditional in FD_SET.

	  FD_SET contains a conditional statement to protect against buffer
	  overruns.  The statement was overly complicated and prevented use
	  of the last array element of ast_fdset.  We now just verify the fd
	  is less than ast_FDMAX.

	  Change-Id: I41895c0b497b052aef5bf49d75c817c48b326f40

2016-02-09 07:11 +0000 [e40fddbeb5]  Joshua Colp <jcolp@digium.com>

	* tests/test_sorcery_memory_cache_thrash: Improve termination process.

	  When terminating the threads thrashing a sorcery memory cache each
	  would be told to stop and then we would wait on them. During at
	  least one thrashing test this was problematic due to the specific
	  usage pattern in use. It would take some time for termination of the
	  thread to occur.

	  This would occur due to contention between the threads retrieving
	  and the threads updating the cache. As the retrieving threads are
	  given priority it may be some time before the updating threads
	  are able to proceed.

	  This change makes it so all threads are told to stop and then each
	  are joined to ensure they stop. This way all the threads should
	  stop at around the same time instead of waiting for one to stop,
	  the next to stop, then the next, and so on. As a result of this
	  the execution time for each thrash test is much closer to their
	  expected value than previously seen as well.

	  Change-Id: I04a53470b0ea4170b8819180b0bd7475f3642827
2016-01-29 17:56 +0000 [bbf3ace682]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Fix infinite recursion when loading transports from realtime

	  Attempting to load a transport from realtime was forcing asterisk into an
	  infinite recursion loop.  The first thing transport_apply did was to do a
	  sorcery retrieve by id for an existing transport of the same name. For files,
	  this just returns the previous object from res_sorcery_config's internal
	  container, if any.  For realtime, the res_sourcery_realtime driver looks in the
	  database and finds the existing row but now it has to rehydrate it into a
	  sorcery object which means calling... transport_apply.  And so it goes.

	  The main issue with loading from realtime (apart from the loop) was that
	  transport stores structures and pointers directly in the ast_sip_transport
	  structure instead of the separate ast_transport_state structure.  This patch
	  separates those items into the ast_sip_transport_state structure.  The pattern
	  is roughly the same as res_pjsip_outbound_registration.

	  Although all current usages of ast_sip_transport and ast_sip_transport_state
	  were modified to use the new ast_sip_get_transport_state API, the original
	  items are left in ast_sip_transport and kept updated to maintain ABI
	  compatability for third-party modules.  They are marked as deprecated and
	  noted that they're now in ast_sip_transport_state.

	  ASTERISK-25606 #close
	  Reported-by: Martin Moučka

	  Change-Id: Ic7a836ea8e786e8def51fe3f8cce855ea54f5f19

2016-02-07 13:00 +0000 [72bf53eea5]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* res_config_pgsql: Add message on cli failed command status

	  In case failed of command "realtime show pgsql status" show a message the data
	  of connection to more clear information in error.

	  Change-Id: Ia8e9e2400466606e7118f52a46e05df0719b6a29

2016-02-05 10:29 +0000 [b69729dde5]  gtjoseph <george.joseph@fairview5.com>

	* chan_misdn: Fix a few issues causing compile errors

	  Change-Id: I54b48c24d7ca88ed80496fdfd142d08772a7ab98

2016-01-25 17:36 +0000 [1bc54aee80]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Only use b_profile options from the conference.

	  A user cannot set new bridge options after the conference is created by
	  the first user.  Attempting to do so is documented as undefined behavior.

	  This patch ensures that the bridge profile options used are from the
	  conference and not what a subsequent user may have tried to set.

	  Change-Id: I1b6383eba654679e5739d5a8de98199cf074a266

2016-02-04 16:17 +0000 [3b426a8b09]  Mark Michelson <mmichelson@digium.com>

	* Check for OpenSSL defines before trying to use them.

	  The SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 defines did not exist prior
	  to OpenSSL version 1.0.1. A recent commit attempts to, by default, set
	  these options, which can cause problems on systems with older OpenSSL
	  installations.

	  This commit adds a configure script check for those defines and will not
	  attempt to make use of those if they do not exist. We will print a
	  warning urging the user to upgrade their OpenSSL installation if those
	  defines are not present.

	  Change-Id: I6a2eb9a43fd0738b404d8f6f2cf4b5c22d9d752d
2016-02-03 14:25 +0000 [9b13ab6a63]  gtjoseph <george.joseph@fairview5.com>

	* pjsip/alembic:  Add missing columns to system and registration

	  ps_systems needed disable_tcp_switch
	  ps_registrations needed line and endpoint

	  ASTERISK-25737 #close

	  Change-Id: Iaf9c2d69e62243d9fa53104c28c5339c47d4ac19

2016-02-04 11:39 +0000 [82e2938fa8]  Mark Michelson <mmichelson@digium.com>

	* res_stasis_device_state: Fix refcounting error.

	  Device state subscription lifetimes were governed by when the
	  subscription was established and unsubscribed from. However, it is
	  possible that at the time of unsubscription, there could be device state
	  events still in flight. When those device state events occur, the device
	  state callback could attempt to dereference a freed pointer. Crash.

	  This change ensures that the lifetime of the device state subscription
	  does not end until the underlying stasis subscription has confirmed that
	  its final message has been sent.

	  Change-Id: I25a0f1472894c1a562252fb7129671478e25e9b2

2016-01-27 10:44 +0000 [d83dba7099]  Sean Bright <sean.bright@gmail.com>

	* res_rtp_asterisk: Allow ICE host candidates to be overriden

	  During ICE negotiation the IPs of the local interfaces are sent to the remote
	  peer as host candidates. In many cases Asterisk is behind a static one-to-one
	  NAT, so these host addresses will be internal IP addresses.

	  To help in hiding the topology of the internal network, this patch adds the
	  ability to override the host candidates by matching them against a
	  user-defined list of replacements.

	  Change-Id: I1c9541af97b83a4c690c8150d19bf7202c8bff1f

2016-02-03 12:05 +0000 [0de74fad55]  Joshua Colp <jcolp@digium.com>

	* AST-2016-001 http: Provide greater control of TLS and set modern defaults.

	  This change exposes the configuration of various aspects of the TLS
	  support and sets the default to the modern standards.

	  The TLS cipher is now set to the best values according to the
	  Mozilla OpSec team, different TLS versions can now be disabled, and
	  the cipher order can be forced to be that of the server instead of
	  the client.

	  ASTERISK-24972 #close

	  Change-Id: I0a10f2883f7559af5e48dee0901251dbf30d45b8
2015-12-07 12:46 +0000 [e67b445e8d]  Richard Mudgett <rmudgett@digium.com>

	* AST-2016-003 udptl.c: Fix uninitialized values.

	  Sending UDPTL packets to Asterisk with the right amount of missing
	  sequence numbers and enough redundant 0-length IFP packets, can make
	  Asterisk crash.

	  ASTERISK-25603 #close
	  Reported by: Walter Doekes

	  ASTERISK-25742 #close
	  Reported by: Torrey Searle

	  Change-Id: I97df8375041be986f3f266ac1946a538023a5255
2015-09-28 17:07 +0000 [a877e0d94b]  Richard Mudgett <rmudgett@digium.com>

	* AST-2016-002 chan_sip.c: Fix retransmission timeout integer overflow.

	  Setting the sip.conf timert1 value to a value higher than 1245 can cause
	  an integer overflow and result in large retransmit timeout times.  These
	  large timeout times hold system file descriptors hostage and can cause the
	  system to run out of file descriptors.

	  NOTE: The default sip.conf timert1 value is 500 which does not expose the
	  vulnerability.

	  * The overflow is now detected and the previous timeout time is
	  calculated.

	  ASTERISK-25397 #close
	  Reported by: Alexander Traud

	  Change-Id: Ia7231f2f415af1cbf90b923e001b9219cff46290
2016-02-03 14:07 +0000 [dcbedf9ab1]  gtjoseph <george.joseph@fairview5.com>

	* logging: Remove/fix some message annoyances

	  test_dlinklists doesn't need to NOTICE everyone that every macro worked.

	  res_phoneprov doesn't need to VERBOSE everyone that a phoneprov extension or
	  provider was registered.

	  res_odbc was missing a newline at the end of one message.

	  Change-Id: I6c06361518ef3711821795e535acd439782a995e

2016-02-02 10:52 +0000 [6522361871]  Alexei Gradinari License #5691

	* res_sorcery_realtime: Fix regex regression.

	  A regression was introduced where searching for realtime PJSIP objects
	  by regex by starting the regex with a leading "^" would cause no items
	  to be returned.

	  This was due to a change which attempted to drop the requirement for a
	  leading "^" to be present due to how some CLI commands formulate their
	  regexes. However, the change, rather than simply eliminating the
	  requirement, caused any regexes that did begin with "^" to end up not
	  returning the expected results.

	  This change fixes the problem by inspecting the regex and formulating
	  the realtime query differently depending on if it begins with "^".

	  ASTERISK-25702 #close
	  Reported by Nic Colledge

	  Patches:
	      realtime_retrieve_regex.patch submitted by Alexei Gradinari License #5691

	  Change-Id: I055df608a6e6a10732044fa737a9fe8dca602693

2016-02-02 04:05 +0000 [2a6f18cd55]  Karsten Wemheuer <kwe-digium@iptam.com>

	* res_xmpp: Does not connect in component mode

	  The module res_xmpp does not accept usernames in the form used in component
	  mode (XEP-0114). In component mode there is no @something in the name.
	  In component mode the connection is now not dropped anymore.

	  If the xmpp server sends out a "stream" tag before handshake is finished,
	  the connection gets dropped in res_xmpp. Now this tag will be ignored and
	  the connection will be established.

	  After connecting there will be an exchange of presence states. This does
	  not work as expected in component mode. The responsible function
	  "xmpp_pak_presence" is left before the states get sent out. Sending
	  presence states in component mode is now moved to the top of the function.

	  ASTERISK-25735 #close

	  Change-Id: I70e036f931c3124ebb2ad1e56f93ed35cfdd9d5c
2016-02-01 13:04 +0000 [40da6434c1]  gtjoseph <george.joseph@fairview5.com>

	* build_system:  Fix some warnings highlighted by clang

	  Fix some warnings found with clang.

	  Change-Id: I5195b6189b148c2ee3ed4a19d015a6d4ef3e77bd

2016-01-31 20:13 +0000 [52b29f9b4c]  gtjoseph <george.joseph@fairview5.com>

	* pjsip/alembic: Fix definition of qualify_timeout

	  A recent commit set qualify_timeout to Decimal which isn't supported.
	  This path corrects it to Float.

	  Change-Id: I038f5274ba8cb60f8518a5845ce448d49306aadf

2016-01-29 07:39 +0000 [55a7367ad4]  Stefan Engström <stefanen@kth.se>

	* chan_sip.c: AMI & CLI notify methods get different values of asterisk's own ip.

	  When I ask asterisk to send a SIP NOTIFY message to a sip peer using either a)
	  AMI action: SIPnotify or b) cli command: sip notify <cmd> <peer>, I expect
	  asterisk to include the same value for its own ip in both cases a) and b),
	  but it seems a) produces a contact header like Contact:
	  <sip:asterisk@192.168.1.227:8060> whereas b) produces a contact header like
	  <sip:asterisk@127.0.0.1:8060>. 0.0.0.0:8060 is my udpbindaddr in sip.conf

	  My guess is that manager_sipnotify should call
	  ast_sip_ouraddrfor(&p->sa, &p->ourip, p) the same way sip_cli_notify does,
	  because after applying this patch, both cases a) and b) produce
	  the contact header that I expect: <sip:asterisk@192.168.1.227:8060>

	  Reported by: Stefan Engström
	  Tested by: Stefan Engström

	  Change-Id: I86af5e209db64aab82c25417de6c768fb645f476
2016-01-28 12:44 +0000 [d2397f028f]  Richard Mudgett <rmudgett@digium.com>

	* config_options.c: Fix warning message wording.

	  Change-Id: I915ea437936320393afde0e7552cf0a980a6b2e4

2016-01-25 17:34 +0000 [af6b15976d]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge.c: Replace inlined code with existing function.

	  Change-Id: Ida5594e9f8d7c1fc18eeb733a11f8fb96326da51

2016-01-25 16:05 +0000 [7932336a3d]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Add ability to get the muted conference state.

	  * Added CONFBRIDGE_INFO(muted,) for querying the muted conference state.

	  * Added Muted header to AMI ConfbridgeListRooms action response list
	  events to indicate the muted conference state.

	  * Added Muted column to CLI "confbridge list" output to indicate the muted
	  conference state and made the locked column a yes/no value instead of a
	  locked/unlocked value.

	  ASTERISK-20987
	  Reported by: hristo

	  Change-Id: I4076bd8ea1c23a3afd4f5833e9291b49a0c448b1

2016-01-26 17:59 +0000 [894045e7cf]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge.c: Update CONFBRIDGE and CONFBRIDGE_INFO documentation.

	  Change-Id: Ic1f9e22ba1f2ff3b3f5cb017c5ddcd9bd48eccc7

2016-01-25 15:48 +0000 [12c93e8f81]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Make non-admin users join a muted conference muted.

	  ASTERISK-20987 #close
	  Reported by: hristo

	  Change-Id: Ic61a2b524ab3a4cfadf227fc6b3506527bc03f38

2016-01-27 13:08 +0000 [f19bf7a321]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Add res_pjproject dependency to samples

	  Since res_pjsip now depends on res_pjproject, this has been added to
	  basic-pbx modules.conf.

	  Change-Id: I42826597d5e10f08e518208860c44c96e52f1b2d
2016-01-27 10:29 +0000 [c53903d447]  gtjoseph <george.joseph@fairview5.com>

	* build_system: Prevent goals needing makeopts from running when it's missing

	  The Makefile only optionally includes makeopts so when goals like uninstall that
	  dont depend on anything else are run after a distclean, rules like
	  'rm -f "$(DESTDIR)$(ASTMODDIR)/"*' get run as 'rm -f ""/*' which attempts
	  to remove everything in the root directory.

	  Although there's a rule defined for makeopts which prints a message and does
	  an 'exit 1', since '-include makepopts' was specified (with the -), the exit
	  was ignored letting the rest of the rules run.

	  This patch makes makeopts required unless the goal has the string 'clean' in it.

	  ASTERISK-25730 #close
	  Reported-by: George Joseph

	  Change-Id: I1bce59a7ea4f48e7a468e22b2abbb13c63417ac7

2016-01-25 09:35 +0000 [1dfd104a27]  Joshua Colp <jcolp@digium.com>

	* config: Allow options to register when documentation is unavailable.

	  The config options framework is strict in that configuration options must
	  be documented unless XML documentation support is not available. In
	  practice this is useful as it ensures documentation exists however in
	  off-nominal cases this can cause strange problems.

	  If it is expected that a config option has a non-zero or non-empty
	  default value but the config option documentation is unavailable
	  this reasonable expectation will not be met. This can cause obscure
	  crashes and weirdness depending on how the code handles it.

	  This change tweaks the behavior to ensure that the config option
	  is still allowed to register, apply default values, and be set when
	  devmode is not enabled. If devmode is enabled then the option can
	  NOT be set.

	  This also does not remove the initial documentation error message that
	  is output on load when registering the configuration option.

	  ASTERISK-25725 #close

	  Change-Id: Iec42fca6b35f31326c33fcdc25473f6fd7bc8af8

2016-01-25 10:23 +0000 [a706ad44e6]  Mark Michelson <mmichelson@digium.com>

	* Stasis: Use custom structure when setting variables.

	  A recent change to queue channel variable setting to the Stasis control
	  queue caused a regression. When setting channel variables, it is
	  possible to give a NULL channel variable value in order to unset the
	  variable (i.e. remove it from the channel variable list). The change
	  introduced a call to ast_variable_new(), which is not tolerant of NULL
	  channel variable values.

	  This new change switches from using ast_variable to using a custom
	  channel variable struct that is lighter weight and NULL value-tolerant.

	  Change-Id: I784d7beaaa3c036ea936d103e7caf0bb1562162d

2016-01-25 16:56 +0000 [289daca9e8]  Rusty Newton <rnewton@digium.com>

	* sounds/Makefile: Incremented core and extra sounds versions to 1.5

	  Core and extra sounds 1.5 was recently released! The tarballs contain
	  change descriptions however I figure more people will see this one so
	  I'll try to be a bit detailed. Approximately 60 sounds were moved from Extra
	  to Core for en, en_GB, fr and added for languages that didn't already
	  have Extra sound sets (it,ja,ru).

	  In addition all of the English and Russian sounds have been completely
	  re-recorded.

	  Sounds moved and added:
	  activated,added,all-circuits-busy-now,astcc-followed-by-pound
	  at-tone-time-exactly,call-forwarding,call-fwd-no-ans,call-fwd-on-busy
	  ,call-fwd-unconditional,calling,call-waiting,cancelled,
	  cannot-complete-as-dialed,check-number-dial-again,conf-full,de-activated
	  ,disabled,do-not-disturb,enabled,enter-num-blacklist,entr-num-rmv-blklist
	  ,extension,feature-not-avail-line,for,from-unknown-caller,goodbye,hello
	  ,if-correct-press,im-sorry,info-about-last-call,is,is-in-use,is-set-to
	  ,location,number,number-not-answering,num-was-successfully,one-moment-please
	  ,please-try-again,pls-hold-while-try,pls-try-call-later,pm-invalid-option
	  ,privacy-to-blacklist-last-caller,removed,simul-call-limit-reached
	  ,something-terribly-wrong,sorry,sorry-youre-having-problems,speed-dial
	  ,speed-dial-empty,telephone-number,time,to-call-this-number,to-extension
	  ,to-listen-to-it,to-rerecord-it,unidentified-no-callback,with,you-entered
	  ,your

	  There were also a few random fixes here and there to file names for a few
	  of the languages.

	  ASTERISK-25068 #close

	  Change-Id: I2b594344ec585d7dfd922b40c1af43b1508828b3
2016-01-25 16:51 +0000 [b073244c51]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Prevent crash from AMI command on freed subscription.

	  A test recently uncovered that running an ill-timed AMI command to show
	  inbound subscriptions could cause a crash since Asterisk will try to
	  operate on a freed subscription.

	  The fix for this is to remove the subscription tree from the list of
	  subscriptions at the time that we are sending our final NOTIFY request
	  out. This way, as the subscription is in the process of dying, it is
	  inaccessible from AMI.

	  Change-Id: Ic0239003d8d73e04c47c12dd2a7e23867e5b5b23

2016-01-25 11:03 +0000 [830f8933c2]  Corey Farrell <git@cfware.com>

	* chan_sip: Fix buffer overrun in sip_sipredirect.

	  sip_sipredirect uses sscanf to copy up to 256 characters to a stacked buffer
	  of 256 characters.  This patch reduces the copy to 255 characters to leave
	  room for the string null terminator.

	  ASTERISK-25722 #close

	  Change-Id: Id6c3a629a609e94153287512c59aa1923e8a03ab

2016-01-23 16:45 +0000 [f299dc0d76]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: Add  Lastpause field of queue member

	  Add time when started a the last pause for a queue member for
	  QueueMemberStatus ami event.

	  Also show accumulate time in seconds when started a pause for a queue
	  member to CLI command 'queue show'.

	  ASTERISK-16394 #close

	  Change-Id: I4b12aa3b2efa8d02939db3e13712510b4879865c

2016-01-23 12:34 +0000 [8c664da0ff]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: fix some tab format

	  Change-Id: I2734392b131f1fb0949515d538f83f30fbc15d8c

2016-01-23 11:41 +0000 [2fb45c7801]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* cdr_pgsql.cl: REFACTOR Macro LENGTHEN_BUF

	  Remove repeated code on macro of assigned buffer to SQL vars.

	  Add table and connection name to log error message when is not possible
	  allocate memory.

	  Change-Id: I1fbf37d286a032d38fdda72a9f736356956c9ffe

2016-01-22 15:08 +0000 [959f7436cc]  Mark Michelson <mmichelson@digium.com>

	* Stasis: Fix potential memory leak of control data.

	  When queuing tasks onto the Stasis control queue, you can pass an
	  arbitrary data pointer and a function to free that data. All ARI
	  commands that use the Stasis control queue made the assumption that the
	  destructor function would be called in all paths, whether the task was
	  queued successfully or not. However, this was not correct. If a task was
	  queued onto a control structure that was already completed, the
	  allocated data would not be freed properly.

	  This patch corrects this by making sure that all return paths call the
	  data destructor.

	  Change-Id: Ibf06522094f8e5c4cce652537dc5d7222b1c4fcb

2016-01-21 10:58 +0000 [a45eacebf3]  Mark Michelson <mmichelson@digium.com>

	* Stasis: Use control queue to prevent crash.

	  A crash occurred when attempting to set a channel variable on a channel
	  that had already been hung up. This is because there is a small window
	  between when a control is grabbed and when the channel variable is set
	  that the channel can be hung up.

	  The fix here is to queue the setting of the channel variable onto the
	  control queue. This way, the manipulation of the channel happens in a
	  thread where it is safe to be done.

	  In this change, I also noticed that the setting of bridge roles on
	  channels was being done outside of the control queue, so I also changed
	  those operations to be done in the control queue.

	  ASTERISK-25709 #close
	  Reported by Mark Michelson

	  Change-Id: I2a0a4d51bce6fba6f1d9954e40935e42f366ea78

2016-01-22 11:48 +0000 [7866806fc3]  Richard Mudgett <rmudgett@digium.com>

	* logger.c: Fix buffer overrun found by address sanitizer.

	  The null terminator of the tail struct member was not being allocated
	  when no logger.conf config file is installed.

	  ASTERISK-25714 #close
	  Reported by: Badalian Vyacheslav

	  Change-Id: I45770fdd08af39506a3bc33ba279c4f16e047a30

2015-12-23 15:07 +0000 [9714da7aa4]  Mark Michelson <mmichelson@digium.com>

	* res_odbc: Remove connection management

	  Asterisk by default will create a single database connection and share
	  it among all threads that attempt to access the database. In previous
	  versions of Asterisk, this was tolerable, because the most used channel
	  driver, chan_sip, mostly accessed the database from a single thread.
	  With PJSIP, however, many threads may be attempting to perform database
	  operations, and there is the potential for many more database accesses,
	  meaning the concurrency is a horrible bottleneck if only one connection
	  is shared.

	  Asterisk has a connection pooling facility built into it, but the
	  implementation has flaws. For one, there is a strict limit on the number
	  of simultaneous connections that could be made to the database. Anything
	  beyond the maximum would result in a failed operation. Attempting to
	  predict what the maximum should be is nearly impossible even for someone
	  intimately familiar with Asterisk's threading model. In addition, use of
	  transactions in the dialplan can cause some severe bugs if connection
	  pooling is enabled.

	  This commit seeks to fix the concurrency problem by removing all
	  connection management code from Asterisk and leaving that to the
	  underlying unixODBC code instead. Now, Asterisk does not share a single
	  connection, nor does it try to maintain a connection pool. Instead, all
	  Asterisk ever does is request a connection from unixODBC and allow
	  unixODBC to either allocate those connections or retrieve them from a
	  pool.

	  Doing this has a bit of a ripple effect. For one, since connections are
	  not long-lived objects, several of the safeguards that previously
	  existed have been removed. We don't have to worry about trying to use a
	  connection that has gone stale. In every case, when we request a
	  connection, it has just been made and we don't need to perform any
	  sanity checks to be sure it's still active.

	  Another major player affected by this change is transactions.
	  Transactions and their respective connections were so tightly coupled
	  that it was almost pornographic. This code change moves
	  transaction-related code to its own file separate from the core ODBC
	  functionality. This way, the core of ODBC does not even have to know
	  that transactions exist.

	  In making this large change, I had to look at a lot of code and
	  understand it. When making this change, I discovered several places
	  where the behavior is definitely not ideal, but it seemed outside the
	  scope of this change to be fixing it. Instead, any place where I saw
	  some sort of room for improvement has had a XXX comment added explaining
	  what could be altered to improve it.

	  Change-Id: I37a84def5ea4ddf93868ce8105f39de078297fbf

2016-01-22 11:18 +0000 [d3969d09ae]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue.c: remove include for core_unreal.h not used in code.

	  Change-Id: Idc2ae8a6bd869a66544916906744a5678622262d

2016-01-21 16:40 +0000 [5dde111719]  Corey Farrell <git@cfware.com>

	* Build System: Add support for checking alembic branches.

	  * Add 'check-alembic' target to root Makefile.
	  * Create build_tools/make_check_alembic to do the actual checks.

	  ASTERISK-25685

	  Change-Id: Ibb3cae7d1202ac23dc70b0f3b5801571ad46b004

2016-01-19 18:20 +0000 [04078f43b5]  Richard Mudgett <rmudgett@digium.com>

	* res/res_pjsip/presence_xml.c: Add missing 2nd call presence state case.

	  ASTERISK-25712 #close
	  Reported by: Richard Mudgett

	  Change-Id: I70634df24f8c6c3a2c66c45af61d021e4999253f

2016-01-13 16:49 +0000 [5615db3714]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Add CLI "pjsip dump endpt [details]"

	  Dump the res_pjsip endpt internals.

	  In non-developer mode we will not document or make easily accessible the
	  "details" option even though it is still available.  The user has to know
	  it exists to use it.  Presumably they would also be aware of the potential
	  crash warning below.

	  Warning: PJPROJECT documents that the function used by this CLI command
	  may cause a crash when asking for details because it tries to access all
	  active memory pools.

	  Change-Id: If2d98a3641c9873364d1daaad971376311aef3cb

2016-01-18 03:49 +0000 [b259ac95ac]  Diederik de Groot <ddegroot@talon.nl>

	* main/asterisk.c: ast_el_read_char

	  Make sure buf[res] is not accessed at res=-1 (buffer underrun).
	  Address Sanitizer will complain about this quite loudly.

	  ASTERISK-24801 #close

	  Change-Id: Ifcd7f691310815a31756b76067c56fba299d3ae9

2016-01-18 19:27 +0000 [dd5c063934]  gtjoseph <george.joseph@fairview5.com>

	* res_pjproject:  Add module providing pjproject logging and utils

	  res_pjsip_log_forwarder has been renamed to res_pjproject
	  and enhanced as follows:

	  As a follow-on to the recent 'Add CLI "pjsip show buildopts"' patch,
	  a new ast_pjproject_get_buildopt function has been added.  It
	  allows the caller to get the value of one of the buildopts.

	  The initial use case is retrieving the runtime value of
	  PJ_MAX_HOSTNAME to insure we don't send a hostname greater
	  than pjproject can handle.  Since it can differ between
	  the version of pjproject that Asterisk was compiled against
	  and the version of pjproject that Asterisk is running against,
	  we can't use the PJ_MAX_HOSTNAME macro directly in Asterisk
	  source code.

	  Change-Id: Iab6e82fec3d7cf00c1cf6185c42be3e7569dee1e

2016-01-18 17:16 +0000 [3b9cba4294]  Matt Jordan <mjordan@digium.com>

	* funcs/func_cdr: Correctly report high precision values for duration and billsec

	  When CDRs were refactored, func_cdr's ability to report high precision values
	  for duration and billsec (the 'f' option) was broken. This was due to func_cdr
	  incorrectly interpreting the duration/billsec values provided by the CDR engine
	  in milliseconds, as opposed to seconds. Since the CDR engine only provides
	  duration and billsec in seconds, and does not expose either attribute with
	  sufficient precision to merely pass back the underlying value, this patch fixes
	  the bug by re-calculating duration and billsec with microsecond precision based
	  on the start/answer/end times on the CDR.

	  ASTERISK-25179 #close

	  Change-Id: I8bc63822b496537a5bf80baf6102c06206bee841

2016-01-20 07:52 +0000 [479cc99acd]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* README: Update year in copyright

	  Change-Id: I56240f537fb3205672cdb2a74f0591ae7bb73dbc

2016-01-19 17:15 +0000 [9fa76ba215]  Joshua Colp <jcolp@digium.com>

	* test_threadpool: Wait for each task to complete and fix memory leak.

	  This change makes the thread_timeout_thrash unit test wait for
	  each task to complete. This fixes the problem where the test would
	  prematurely end when all threads were gone and a new one had to be
	  started to handle the last task. It also increases the thrasing as
	  it is now more likely for each task to encounter the above scenario.

	  This also fixes a memory leak where the data for each task was not
	  being freed.

	  ASTERISK-25611 #close

	  Change-Id: I5017d621a4dc911f509074c16229b86bff2fb3c6

2016-01-18 19:44 +0000 [c9f7269b2e]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Increase CLI "core ping taskprocessor" timeout.

	  Change-Id: I4892d6acbb580d6c207d006341eaf5e0f8f2a029

2016-01-18 19:43 +0000 [6e2a867716]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Fix some taskprocessor unrefs.

	  You have to call ast_taskprocessor_unref() outside of the taskprocessor
	  implementation code.  Taskprocessor use since v12 has become more
	  transient than just the singleton uses in earlier versions.

	  Change-Id: If7675299924c0cc65f2a43a85254e6f06f2d61bb

2016-01-19 14:16 +0000 [a4dcbdf50f]  Richard Mudgett <rmudgett@digium.com>

	* Fix alembic branches on master.

	  Change-Id: I64ed21fec50eb833641ca49d92184f6aaabd86e8

2016-01-05 17:12 +0000 [35a3e8cc7f]  Corey Farrell <git@cfware.com>

	* Refactor init_logger_chain locking.

	  This removes logchannels locking from init_logger_chain, puts the
	  responsibility on the caller.  Adds locking around the one call that was
	  missing it.

	  ASTERISK-24833

	  Change-Id: I6cc42117338bf9575650a67bcb78ab1a33d7bad8

2016-01-18 22:10 +0000 [378fed4900]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: Fix preserved reason of pause when Asterisk is restared

	  When the Asterisk is restared is not preseved reason paused of members.
	  This patch fixed this cases, retain data on astdb and set when Asterisk
	  is started.

	  ASTERISK-25732 #close

	  Report by: Rodrigo Ramírez Norambuena

	  Change-Id: Id3fb744c579e006d27cda4a02334ac0e4bed9eb5

2016-01-18 19:01 +0000 [130aa1427e]  gtjoseph <george.joseph@fairview5.com>

	* pjsip_loging_refactor: Rename res_pjsip_log_forwarder to res_pjproject

	  Change-Id: I5387821f29e5caa0cba0b7d62b0fc0d341e7e20b

2016-01-16 13:18 +0000 [eaf2b5052e]  Daniel Journo <dan@keshercommunications.com>

	* Update version number in features.conf.sample

	  Update the version number in the comments from Asterisk 12 to Asterisk 12+

	  Change-Id: Ie692ac8cda3c993c3bf10f27f51a1cca3317ec7b

2016-01-13 15:58 +0000 [c60d6c0162]  Daniel Journo <dan@keshercommunications.com>

	* pjsip/alembic:  Fix qualify_timeout column definition

	  Corrects the qualify_timeout column type from Integer to Decimal

	  ASTERISK-25686 #close
	  Reported-by: Marcelo Terres

	  Change-Id: I757d0e3c011ee9be6cd5abd48bc92441a405d3c8

2016-01-15 19:52 +0000 [480ccfcc97]  Corey Farrell <git@cfware.com>

	* main/config: Clean config maps on shutdown.

	  ASTERISK-25700 #close

	  Change-Id: I096da84f9c62c6095f68bcf98eac4b7c7868e808

2016-01-14 14:42 +0000 [a5b38b604c]  Kevin Harwell <kharwell@digium.com>

	* bridge_basic: don't cache xferfailsound during an attended transfer

	  The xferfailsound was read from the channel at the beginning of the transfer,
	  and that value is "cached" for the duration of the transfer. Therefore, changing
	  the xferfailsound on the channel using the FEATURE() dialplan function does
	  nothing once the transfer is under way.

	  This makes it so the transfer code instead gets the xferfailsound configuration
	  options from the channel when it is actually going to be used.

	  This patch also fixes a potential memory leak of the props object as well as
	  making sure the condition variable gets initialized before being destroyed.

	  ASTERISK-25696 #close

	  Change-Id: Ic726b0f54ef588bd9c9c67f4b0e4d787934f85e4

2015-07-10 10:37 +0000 [d36c4d0b01]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Simplify ast_taskprocessor_get() return code.

	  Change-Id: Id5bd18ef1f60ef8be453e677e98478298358a9d1

2016-01-13 18:20 +0000 [0a878020dc]  Richard Mudgett <rmudgett@digium.com>

	* astmm.c: Add more stats to CLI "memory show" commands.

	  * Add freed regions totals to allocations and summary.

	  * Add totals for all allocations and not just the selected allocations.

	  Change-Id: I61d5a5112617b0733097f2545a3006a344b4032a

2016-01-14 16:00 +0000 [84b30c5e18]  Kevin Harwell <kharwell@digium.com>

	* bridge_basic: don't play an attended transfer fail sound after target hangs up

	  If the attended transfer destination answers (picks call up or goes to
	  voicemail) and then hangs up on the transferer then transferer hears the
	  fail sound.

	  This patch makes it so the fail sound is not played when the transfer
	  destination/target hangs up after answering.

	  ASTERISK-25697 #close

	  Change-Id: I97f142fe4fc2805d1a24b7c16143069dc03d9ded

2016-01-14 14:36 +0000 [c7caee6c4b]  Corey Farrell <git@cfware.com>

	* Remove *.gcna / *.gcno files from added module sources.

	  Asterisk uses a Makefile macro to associate additional sources with a
	  module.  This macro is responsible for creating clean targets but
	  previously left behind *.gcna and *.gcno files.

	  ASTERISK-25683 #close
	  Reported by yaron nahum

	  Change-Id: Idc0823fe80a25c42cefae901fde875e9fc38d8ea

2016-01-14 09:26 +0000 [68cad96ffd]  Rusty Newton <rnewton@digium.com>

	* func_channel: Add help text for undocumented CHANNEL function arguments

	  Adding help text documentation for:
	  * hangupsource
	  * appname
	  * appdata
	  * exten
	  * context
	  * channame
	  * uniqueid
	  * linkedid

	  ASTERISK-24097 #close
	  Reported by: Steven T. Wheeler
	  Tested by: Rusty Newton

	  Change-Id: Ib94b00568b0433987df87d5b67ea529b5905754d

2016-01-10 16:22 +0000 [8182146e85]  Daniel Journo <dan@keshercommunications.com>

	* pjsip:  Add option global/regcontext

	  Added new global option (regcontext) to pjsip. When set, Asterisk will
	  dynamically create and destroy a NoOp priority 1 extension
	  for a given endpoint who registers or unregisters with us.

	  ASTERISK-25670 #close
	  Reported-by: Daniel Journo

	  Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62

2016-01-12 11:14 +0000 [022423b98b]  Joshua Colp <jcolp@digium.com>

	* app: Queue hangup if channel is hung up during sub or macro execution.

	  This issue was exposed when executing a connected line subroutine.
	  When connected or redirected subroutines or macros are executed it is
	  expected that the underlying applications and logic invoked are fast
	  and do not consume frames. In practice this constraint is not enforced
	  and if not adhered to will cause channels to continue when they shouldn't.
	  This is because each caller of the connected or redirected logic does not
	  check whether the channel has been hung up on return. As a result the
	  the hung up channel continues.

	  This change makes it so when the API to execute a subroutine or
	  macro is invoked the channel is checked to determine if it has hung up.
	  If it has then a hangup is queued again so the caller will see it
	  and stop.

	  ASTERISK-25690 #close

	  Change-Id: I1f9a8ceb1487df0389f0d346ce0f6dcbcaf476ea

2016-01-13 07:20 +0000 [79a7321a47]  Sean Bright <sean.bright@gmail.com>

	* res_musiconhold: Prevent multiple simultaneous reloads.

	  There are two ways in which the reload() function in res_musiconhold can be
	  called from the CLI:

	    * module reload res_musiconhold.so
	    * moh reload

	  In the former case, the module loader holds a lock that prevents multiple
	  concurrent calls, but in the latter there is no such protection.

	  This patch changes the 'moh reload' CLI command to invoke the module loader
	  directly, rather than call reload() explicitly.

	  ASTERISK-25687 #close

	  Change-Id: I408968b4c8932864411b7f9ad88cfdc7b9ba711c
2016-01-12 14:25 +0000 [1fffe71f77]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_log_forwarder.c: Add CLI "pjsip show buildopts".

	  PJPROJECT has a function available to dump the compile time
	  options used when building the library.

	  * Add CLI "pjsip show buildopts" command.

	  * Update contrib/scripts/autosupport to get pjproject information.

	  Change-Id: Id93a6a916d765b2a2e5a1aeb54caaf83206be748

2016-01-12 10:36 +0000 [01c5e2a07e]  Mark Michelson <mmichelson@digium.com>

	* res_sorcery_realtime: Remove leading ^ requirement.

	  res_sorcery_realtime's search-by-regex callback performed a check to
	  ensure that the passed-in regex began with a caret (^). If it did not,
	  then no results would be returned.

	  This callback only started to become used when "like" support was added
	  to PJSIP CLI commands. The CLI command for listing objects would pass an
	  empty regex ("") to the sorcery backend if no "like" statement was
	  present. For most sorcery backends, this resulted in returning all
	  objects. However, for realtime, this resulted in returning no objects.

	  This commit seeks to fix the regression by removing the requirement from
	  res_sorcery_realtime for the passed-in-regex to begin with a caret.

	  ASTERISK-25689 #close
	  Reported by Marcelo Terres

	  Change-Id: I22b4dc5d7f3f11bb29ac2e42ef94682e9bab3b20

2016-01-07 11:57 +0000 [a41aab477a]  gtjoseph <george.joseph@fairview5.com>

	* pjsip_sdp_rtp:  Add option endpoint/bind_rtp_to_media_address

	  On a system with multiple ip addresses in the same subnet, if a
	  transport is bound to a specific ip address and endpoint/media_address
	   is set, the SIP/SDP will have the correct address in all fields but
	  the rtp stream MAY still originate from one of the other ip addresses,
	  most probably the "primary" ip address.  This happens because
	   res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with
	  the "all" ip address (0.0.0.0 or ::).

	  The new option causes res_pjsip_sdp_rtp/create_rtp to call
	  ast_rtp_instance_new with the endpoint's media_address (if specified)
	  instead of the "all" address.  This causes the packets to originate from
	  the specified address.

	  ASTERISK-25632
	  ASTERISK-25637
	  Reported-by: Olivier Krief
	  Reported-by: Dan Journo

	  Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88

2016-01-08 16:59 +0000 [7760029f19]  Kevin Harwell <kharwell@digium.com>

	* pbx: Deadlock between contexts container and context_merge locks

	  Recent changes (ASTERISK-25394 commit 2bd27d12223fe33b58c453965ed5c6ed3af7c4f5)
	  introduced the possibility of a deadlock. Due to the mentioned modifications
	  ast_change_hints now needs to keep both merge/delete and state callbacks from
	  occurring while it executes. Unfortunately, sometimes ast_change_hints can be
	  called with the contexts container locked. When this happens it's possible for
	  another thread to grab the context_merge_lock before the thread calling into
	  ast_change_hints does and then try to obtain the contexts container lock. This
	  of course causes a deadlock between the two threads. The thread calling into
	  ast_change_hints waits for the other thread to release context_merge_lock and
	  the other thread is waiting on that one to release the contexts container lock.

	  Unfortunately, there is not a great way to fix this problem. When hints change,
	  the subsequent state callbacks cannot run at the same time as a merge/delete,
	  nor when the usual state callbacks do. This patch alleviates the problem by
	  having those particular callbacks (the ones run after a hint change) occur in a
	  serialized task. By moving the context_merge_lock to a task it can now safely be
	  attempted or held without a deadlock occurring.

	  ASTERISK-25640 #close
	  Reported by: Krzysztof Trempala

	  Change-Id: If2210ea241afd1585dc2594c16faff84579bf302

2016-01-10 17:08 +0000 [e9c2c1dc67]  Corey Farrell <git@cfware.com>

	* devicestate: Cleanup engine thread during graceful shutdown.

	  ASTERISK-25681 #close

	  Change-Id: I64337c70f0ebd8c77f70792042684607c950c8f1

2016-01-10 13:51 +0000 [90c0dcaee4]  Corey Farrell <git@cfware.com>

	* manager: Cleanup manager_channelvars during shutdown.

	  ASTERISK-25680 #close

	  Change-Id: I3251d781cbc3f48a6a7e1b969ac4983f552b2446

2016-01-10 13:27 +0000 [a868a381f0]  Corey Farrell <git@cfware.com>

	* res_calendar: Cleanup scheduler context at unload.

	  ASTERISK-25679 #close

	  Change-Id: I839159bf6882cccc1b23494c7aa2bc2a2624613f

2016-01-08 11:49 +0000 [a1c43022d2]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Revert DTLS negotiation changes.

	  Due to locking issues within pjnath these changes are being
	  reverted until pjnath can be changed.

	  ASTERISK-25645

	  Revert "res_rtp_asterisk.c: Fix DTLS negotiation delays."

	  This reverts commit 24ae124e4f7310cfa64c187b944b2ffc060da28d.

	  Change-Id: I2986cfb2c43dc14455c1bcaf92c3804f9da49705

	  Revert "res_rtp_asterisk: Resolve further timing issues with DTLS negotiation"

	  This reverts commit 965a0eee46d24321f74c244e23c5a5f45e67e12b.

	  Change-Id: Ie68fafde27dad4b03cb7a1e27ce2a8502c3f7bbe

2016-01-09 17:57 +0000 [220ba979cf]  gtjoseph <george.joseph@fairview5.com>

	* Revert "pjsip_location: Delete contact_status object when contact is deleted"

	  This reverts commit 0a9941de9d24093b5ff44096d1d7406f29d11e45.

	  Matt,

	  This patch causes another problem and should not have been needed.
	  Before this patch, persistent_endpoint_contact_deleted_observer WAS
	  deleting the contact_status when ast_sip_location_delete_contact was
	  called.  By deleting it yourself in ast_sip_location_delete_contact
	  it was gone before the observer could run and the observer therefore
	  was throwing an error and not sending stasis/AMI/statsd messages.

	  So, I don't think this was the cause of your original issue.  I also
	  had verified the contact AMI and statsd lifecycle and it was working.
	  I'll double check now though.

	  ASTERISK-25675
	  Reported-by: Daniel Journo

	  Change-Id: Ib586a6b7f90acb641b0c410f659743ab90e84f1a

2016-01-09 18:04 +0000 [26e0e113dc]  Corey Farrell <git@cfware.com>

	* pbx_dundi: Run cleanup on failed load.

	  During failed startup of pbx_dundi no cleanup was performed.  Add a call
	  to unload_module before returning AST_MODULE_LOAD_DECLINE.

	  ASTERISK-25677 #close

	  Change-Id: I8ffa226fda4365ee7068ac1f464473f1a4ebbb29

2016-01-09 13:28 +0000 [dc2c000fd5]  Corey Farrell <git@cfware.com>

	* res_crypto: Perform cleanup at shutdown.

	  This change causes res_crypto to unregister CLI at shutdown while still
	  preventing the module from being unloaded.

	  ASTERISK-25673 #close

	  Change-Id: Ie5d57338dc2752abfc0dd05d0eec86413f2304fc

2016-01-06 19:10 +0000 [0bca2a5c26]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Create human friendly serializer names.

	  PJSIP name formats:
	  pjsip/aor/<aor>-<seq> -- registrar thread pool serializer
	  pjsip/default-<seq> -- default thread pool serializer
	  pjsip/messaging -- messaging thread pool serializer
	  pjsip/outreg/<registration>-<seq> -- outbound registration thread pool
	  serializer
	  pjsip/pubsub/<endpoint>-<seq> -- pubsub thread pool serializer
	  pjsip/refer/<endpoint>-<seq> -- REFER thread pool serializer
	  pjsip/session/<endpoint>-<seq> -- session thread pool serializer
	  pjsip/websocket-<seq> -- websocket thread pool serializer

	  Change-Id: Iff9df8da3ddae1132cb2ef65f64df0c465c5e084

2016-01-06 19:09 +0000 [f0f5fbbc01]  Richard Mudgett <rmudgett@digium.com>

	* Sorcery: Create human friendly serializer names.

	  Sorcery name formats:
	  sorcery/<type>-<seq> -- Sorcery thread pool serializer

	  Change-Id: Idc2e5d3dbab15c825b97c38c028319a0d2315c47

2016-01-06 19:09 +0000 [b1c7ae9afc]  Richard Mudgett <rmudgett@digium.com>

	* Stasis: Create human friendly taskprocessor/serializer names.

	  Stasis name formats:
	  subm:<topic>-<seq> -- Stasis subscription mailbox task processor
	  subp:<topic>-<seq> -- Stasis subscription thread pool serializer

	  Change-Id: Id19234b306e3594530bb040bc95d977f18ac7bfd

2016-01-07 16:15 +0000 [3e857bb347]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: New API for human friendly taskprocessor names.

	  * Add new API call to get a sequence number for use in human friendly
	  taskprocessor names.

	  * Add new API call to create a taskprocessor name in a given buffer and
	  append a sequence number.

	  Change-Id: Iac458f05b45232315ed64aa31b1df05b875537a9

2016-01-06 17:19 +0000 [84c245d38c]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Fix CLI "core show taskprocessors" output format.

	  Update the CLI "core show taskprocessors" output format to not be
	  distorted because UUID names are longer than previously used taskprocessor
	  names.

	  Change-Id: I1a5c82ce3e8f765a0627796aba87f8f7be077601

2016-01-07 21:07 +0000 [7d86979ea0]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Fix CLI "core show taskprocessors" unref.

	  Change-Id: I1d9f4e532caa6dfabe034745dd16d06134efdce5

2016-01-06 19:00 +0000 [1fb39aa8a0]  Richard Mudgett <rmudgett@digium.com>

	* ccss.c: Replace space in taskprocessor name.

	  The CLI "core ping taskprocessor" command does not work very
	  well with taskprocessor names that have spaces in them.  You
	  have to put quotes around the name so using tab completion
	  becomes awkward.

	  Change-Id: I29e806dd0a8a0256f4e2e0a7ab88c9e19ab0eda0

2016-01-07 20:44 +0000 [71bb7b9c40]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Sort CLI "core show taskprocessors" output.

	  Change-Id: I71e7bf57c7b908c8b8c71f1816348ed7c5a5d51e

2016-01-05 16:54 +0000 [b025e1982f]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Add CLI "core ping taskprocessor" missing unlock.

	  Change-Id: I78247e0faf978bf850b5ba4e9f4933ab3c59d17b

2015-12-16 11:25 +0000 [c5e16fe33a]  Mark Michelson <mmichelson@digium.com>

	* Alembic: Add PJSIP global keep_alive_interval.

	  The keep_alive_interval option was added about a year ago, but no
	  alembic revision was created to add the appropriate column to the
	  database.

	  This commit fixes the problem and adds the column. This was discovered
	  by running the testsuite with automatic conversion to realtime enabled.

	  Change-Id: If3ef92a7c4f4844d08f8aae170d2178aec5c4c1a

2016-01-07 03:21 +0000 [6745cd6529]  Diederik de Groot <ddegroot@talon.nl>

	* include/asterisk/time.h: Renamed global declaration:tv

	  Renamed global declaration:tv to dummy_tv_var_for_types,
	  which would oltherwise cause 'shadow' warnings when 'tv'
	  was declared as a local variable elsewhere.

	  Added comment to note that dummy_tv_var_for_types is never
	  really exported and only used as a place holder.

	  ASTERISK-25627 #close

	  Change-Id: I9a6e17995006584f3627efe8988e3f8aa0f5dc28

2016-01-07 15:37 +0000 [1afc8432dc]  Mark Michelson <mmichelson@digium.com>

	* PJSIP: Prevent deadlock due to dialog/transaction lock inversion.

	  A deadlock was observed where the monitor thread was stuck, therefore
	  resulting in no incoming SIP traffic being processed.

	  The problem occurred when two 200 OK responses arrived in response to a
	  terminating NOTIFY request sent from Asterisk. The first 200 OK was
	  dispatched to a threadpool worker, who locked the corresponding
	  transaction. The second 200 OK arrived, resulting in the monitor thread
	  locking the dialog. At this point, the two threads are at odds, because
	  the monitor thread attempts to lock the transaction, and the threadpool
	  thread loops attempting to try to lock the dialog.

	  In this case, the fix is to not have the monitor thread attempt to hold
	  both the dialog and transaction locks at the same time. Instead, we
	  release the dialog lock before attempting to lock the transaction.

	  There have also been some debug messages added to the process in an
	  attempt to make it more clear what is going on in the process.

	  ASTERISK-25668 #close
	  Reported by Mark Michelson

	  Change-Id: I4db0705f1403737b4360e33a8e6276805d086d4a

2016-01-07 09:39 +0000 [5d8c42c6d3]  Corey Farrell <git@cfware.com>

	* ast_format_cap_append_by_type: Resolve codec reference leak.

	  This resolves a reference leak caused by ASTERISK-25535.  The pointer
	  returned by ast_format_get_codec is saved so it can be released.

	  ASTERISK-25664 #close

	  Change-Id: If9941b1bf4320b2c59056546d6bce9422726d1ec

2016-01-07 03:33 +0000 [7856762f2f]  Diederik de Groot <ddegroot@talon.nl>

	* main: Use ast_strdup instead of strdup

	  Fix compile error in main/utils.c because strdup was used in dummy_start

	  Change-Id: Id61a6cf4f3cbf235450441e10e7da101a6335793

2016-01-06 07:12 +0000 [64b2046f3d]  Walter Doekes <walter+asterisk@wjd.nu>

	* Add sipp-sendfax.xml and spandspflow2pcap.py to contrib/scripts.

	  The spandspflow2pcap.py creates pcap files from fax.log files, generated
	  through 'fax set debug on' when receiving a fax. An example fax.log is
	  included as spandspflow2pcap.log.

	  The sipp-sendfax.xml SIPp scenario can be used to replay that fax with a
	  recent version of SIPp.

	  ASTERISK-25660 #close

	  Change-Id: I4de8f28b084055b482ab8a5b28d28b605b0ed526

2016-01-04 04:26 +0000 [084563e136]  Aaron An <anjb@ti-net.com.cn>

	* cel/cel_radius: Fix wrong pointer.

	  The macro ADD_VENDOR_CODE defined in the cel_radius.c should use the parameter
	  y not the address of y.

	  I capture the radius UDP packet via tcpdump, and the AV pairs are not correct,
	  then i review the source code and compare it with cdr/cdr_radius.c. Fix it and
	   it works.

	  ASTERISK-25647 #close
	  Reported by: Aaron An
	  Tested by: Aaron An

	  Change-Id: I72889bccd8fde120d47aa659edc0e7e6d4d019f0

2016-01-04 20:23 +0000 [36f1eaf0b5]  Corey Farrell <git@cfware.com>

	* main/pbx: Move hangup handler routines to pbx_hangup_handler.c.

	  This is the sixth patch in a series meant to reduce the bulk of pbx.c.
	  This moves hangup handler management functions to their own source.

	  Change-Id: Ib25a75aa57fc7d5c4294479e5cc46775912fb104

2015-12-21 11:07 +0000 [90b06d1a3c]  Martin Tomec <tomec.martin@gmail.com>

	* app_queue: Add member flag "in_call" to prevent reading wrong lastcall time

	  Member lastcall time is updated later than member status. There was chance to
	  check wrapuptime for available member with wrong (old) lastcall time.
	  New boolean flag "in_call" is set to true right before connecting call, and
	  reset to false after update of lastcall time. Members with "in_call" set to true
	  are treat as unavailable.

	  ASTERISK-19820 #close

	  Change-Id: I1923230cf9859ee51563a8ed420a0628b4d2e500

2016-01-04 19:46 +0000 [3507494b8a]  Corey Farrell <git@cfware.com>

	* main/pbx: Move dialplan application management routines to pbx_app.c.

	  This is the sixth patch in a series meant to reduce the bulk of pbx.c.
	  This moves dialplan application management functions to their own source.

	  Change-Id: I444c10fb90a3cdf9f3047605d6a8aad49c22c44c

2016-01-04 18:20 +0000 [54a8f1a396]  Corey Farrell <git@cfware.com>

	* main/pbx: Move switch routines to pbx_switch.c.

	  This is the fifth patch in a series meant to reduce the bulk of pbx.c.
	  This moves ast_switch functions to their own source.

	  Change-Id: Ic2592a18a5c4d8a3c2dcf9786c9a6f650a8c628e

2016-01-04 18:00 +0000 [c3c8b8e41d]  Corey Farrell <git@cfware.com>

	* main/pbx: Move timing routines to pbx_timing.c.

	  This is the fourth patch in a series meant to reduce the bulk of pbx.c.
	  This moves pbx timing functions to their own source.

	  Change-Id: I05c45186cb11edfc901e95f6be4e6a8abf129cd6

2015-12-30 10:49 +0000 [6d18fe151c]  gtjoseph <george.joseph@fairview5.com>

	* voicemail: Move app_voicemail / res_mwi_external conflict to runtime

	  The menuselect conflict between app_voicemail and res_mwi_external
	  makes it hard to package 1 version of Asterisk.  There no actual
	  build dependencies between the 2 so moving this check to runtime
	  seems like a better solution.

	  The ast_vm_register and ast_vm_greeter_register functions in app.c
	  were modified to return AST_MODULE_LOAD_DECLINE instead of -1 if there
	  is already a voicemail module registered. The modules' load_module
	  functions were then modified to return DECLINE instead of -1 to the
	  loader.  Since -1 is interpreted by the loader as AST_MODULE_LOAD_FAILURE,
	  the modules were incorrectly causing Asterisk to stop so this needed
	  to be cleaned up anyway.

	  Now you can build both and use modules.conf to decide which voicemail
	  implementation to load.

	  The default menuselect options still build app_voicemail and not
	  res_mwi_external but if both ARE built, res_mwi_external will load
	  first and become the voicemail provider unless modules.conf rules
	  prevent it.  This is noted in CHANGES.

	  Change-Id: I7d98d4e8a3b87b8df9e51c2608f0da6ddfb89247

2016-01-04 16:15 +0000 [5ee5c3739e]  Corey Farrell <git@cfware.com>

	* main/pbx: Move variable routines to pbx_variables.c.

	  This is the third patch in a series meant to reduce the bulk of pbx.c.
	  This moves channel and global variable routines to their own source.

	  Change-Id: Ibe8fb4647db11598591d443a99e3f99200a56bc6

2015-12-04 17:22 +0000 [f88b952093]  Richard Mudgett <rmudgett@digium.com>

	* app_dial: Immediately exit dial if the caller is already hung up.

	  If a caller hangs up before dial is executed within an AGI then the AGI
	  has likely eaten all queued frames before executing the dial in DeadAGI
	  mode.  With the caller hung up and no pending frames from the caller's
	  read queue, dial would not know that the call has hung up until a called
	  channel answers.  It is rather annoying to whoever just answered the
	  non-existent call.

	  Dial should not continue execution in DeadAGI mode, hangup handlers, or
	  the h exten.

	  * Added a check early in dial to abort dialing if the caller has hungup.

	  ASTERISK-25307 #close
	  Reported by: David Cunningham

	  Change-Id: Icd1bc0764726ef8c809f76743ca008d0f102f418

2016-01-02 10:26 +0000 [e9dd16364e]  Matt Jordan <mjordan@digium.com>

	* main/cdr: Allow setting properties on a finalized CDR if it is the last one

	  Prior to this patch, we explicitly disallowed setting any properties on a
	  finalized CDR. This seemed like a good idea at the time; in practice, it was
	  more restrictive.

	  There are weird and strange scenarios where setting a property on a finalized
	  CDR is definitely wrong. For example, we may Fork a CDR, finalizing the
	  previous one, then change a property. In said case, the old CDR is supposed
	  to now be 'immutable' (so to speak), and should not be updated. From the
	  perspective of the code, a forked CDR that is finalized is just finalized.
	  Hence why we decided these should not be updated.

	  In practice, it is much more common to want to set a property on a CDR in
	  the h extension or in a hangup handler. Disallowing a common scenario to make
	  an esoteric behaviour work isn't good. This patch fixes this by allowing
	  callers to set a property IF we are the last CDR in the chain. This preserves
	  the finalized CDR if it was forked, while allowing the more common case to
	  function.

	  ASTERISK-25458 #close

	  Change-Id: Icf3553c607b9f561152a41e6d8381d594ccdf4b9

2016-01-02 10:23 +0000 [153547a9b1]  Matt Jordan <mjordan@digium.com>

	* main/cdr: Set the end time on a CDR if endbeforehexten is Yes

	  Prior to this patch, the CDR engine attempted to set the end time on a CDR
	  that was executing hangup logic and with endbeforehexten set to Yes by
	  calling a function that inspects the properties on the Party A snapshot to
	  determine if we are ready to set the end time. That always failed. This is
	  because a Party A snapshot is not updated for CDRs that are executing hangup
	  logic with endbeforehexten=Yes.

	  Instead of calling a function that looks at the Party A snapshot, we just
	  simply set the end time on the CDR. This is safe to call multiple times, and is
	  safe to call at this point as we know that (a) we are executing hangup logic,
	  and (b) we are supposed to set the end time at this point.

	  ASTERISK-25458

	  Change-Id: I0c27b493861f9c13c43addbbb21257f79047a3b3

2015-12-30 20:51 +0000 [f9bfc2450e]  Corey Farrell <git@cfware.com>

	* main/pbx: Move custom function routines to pbx_functions.c.

	  This is the second patch in a series meant to reduce the bulk of pbx.c.
	  This moves custom function management routines to their own source.

	  Change-Id: I34a6190282f781cdbbd3ce9d3adeac3c3805e177

2016-01-01 05:25 +0000 [3fd528dddf]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* Happy new year 2016.

	  Change-Id: I22d3c90f6f27df82e915bbf81c1d91221f7a945e

2015-12-13 13:09 +0000 [9cdf3ec19d]  Matt Jordan <mjordan@digium.com>

	* res_pjsip_history: Add a module that provides PJSIP history for debugging

	  This patch adds a new module, res_pjsip_history, that provides a slightly
	  better way of debugging SIP message traffic on a busy Asterisk system. The
	  existing mechanisms all rely on passively dumping a SIP message to the CLI.
	  While this is perfectly fine for logging purposes and well controlled
	  environments, on many installations, the amount of SIP messages Asterisk
	  receives will quickly swamp the CLI. This makes it difficult to view/capture
	  those messages that you want to diagnose in real time.

	  This patch provides another way of handling this. When enabled, the module
	  will store SIP message traffic in memory. This traffic can then be queried
	  at leisure.

	  In order to make the querying useful, a CLI command has been implemented,
	  'pjsip show history', that supports a basic expression syntax similar to
	  SQL or other query languages. A small number of useful fields have been
	  added in this initial patch; additional fields can easily be added in
	  later improvements. Those fields are:
	   - number: The entry index in the history
	   - timestamp: The time the message was recieved
	   - addr: The source/destination address of the message
	   - sip.msg.request.method: The request method
	   - sip.msg.call-id: The Call-ID header

	  Note - this is a resurrection of the module initially proposed on Review Board
	  here: https://reviewboard.asterisk.org/r/4053/

	  Change-Id: I39bd74ce998e99ad5ebc0aab3e84df3a150f8e36

2015-12-28 19:18 +0000 [5e67e51c6a]  gtjoseph <george.joseph@fairview5.com>

	* main/pbx: Move pbx_builtin dialplan applications to pbx_builtins.c

	  We joked about splitting pbx.c into multiple files but this first step was
	  fairly easy.  All of the pbx_builtin dialplan applications have been moved
	  into pbx_builtins.c and a new pbx_private.h file was added. load_pbx_builtins()
	  is called by asterisk.c just after load_pbx().

	  A few functions were renamed and are cross-exposed between the 2 source files.

	  Change-Id: I87066be3dbf7f5822942ac1449d98cc43fc7561a

2015-12-28 14:02 +0000 [a05bb258b1]  Joshua Colp <jcolp@digium.com>

	* test_time: Provide a timeout when waiting.

	  The test_timezone_watch unit test is written to expect a
	  condition to be signaled when the inotify daemon thread runs.
	  There exists a small window where the test_timezone_watch
	  thread can signal the inotify daemon thread while it is not
	  reading on the underlying file descriptor. If this occurs
	  the test_timezone_watch thread will wait indefinitely for a
	  signal that will never arrive.

	  This change adds a timeout to the condition so it will return
	  regardless after a period of time.

	  Change-Id: Ifed981879df6de3d93acd3ee0a70f92546517390

2015-12-24 20:26 +0000 [96b32e0321]  Matt Jordan <mjordan@digium.com>

	* tests/test_stasis_endpoints: Remove expected duplicate events

	  The cache_clear test was written to expect duplicate Stasis messages
	  sent from the technology endpoint to the all caching topic. This patch
	  fixes the test to no longer expect these duplicate messages.

	  ASTERISK-25137

	  Change-Id: I58075d70d6cdf42e792e0fb63ba624720bfce981

2015-12-24 22:19 +0000 [3bddcc0219]  Dade Brandon <dade@xencall.com>

	* res_http_websocket.c: prevent avoidable disconnections caused by write errors

	  Updated ast_websocket_write to encode the entire frame in to one
	  write operation, to ensure that we don't end up with a situation
	  where the websocket header has been sent, while the body can not
	  be written.

	  Previous to August's patch in commit b9bd3c14, certain network
	  conditions could cause the header to be written, and then the
	  sub-sequent body to fail - which would cause the next successful
	  write to contain a new header, and a new body (resulting in
	  the peer receiving two headers - the second of which would be
	  read as part of the body for the first header).

	  This was patched to have both write operations individually fail
	  by closing the websocket.

	  In a case available to the submitter of this patch, the same
	  body which would consistently fail to write, would succeed
	  if written at the same time as the header.

	  This update merges the two operations in to one, adds debug messages
	  indicating the reason for a websocket connection being closed during
	  a write operation, and clarifies some variable names for code legibility.

	  Change-Id: I4db7a586af1c7a57184c31d3d55bf146f1a40598

2015-05-27 13:22 +0000 [22db16fa81]  gtjoseph <george.joseph@fairview5.com>

	* endpoint/stasis: Eliminate duplicate events on endpoint status change

	  When an endpoint is created, its messages are forwarded to both the tech
	  endpoint topic and the all endpoints topic. This is done so that various
	  parties interested in endpoint messages can subscribe to just the tech
	  endpoint and receive all messages associated with that particular technology,
	  as opposed to subscribing to the all endpoints topic. Unfortunately, when the
	  tech endpoint is created, it also forwards all of its messages to the all
	  topic. This results in duplicate messages whenever an endpoint publishes its
	  messages.

	  This patch resolves the duplicate message issue by creating a new function
	  for Stasis caching topics, stasis_cp_sink_create. In most respects, this acts
	  as a normal caching topic, save that it no longer forwards messages it receives
	  to the all endpoints topic. This allows it to act as an aggregation "sink",
	  while preserving the necessary caching behaviour.

	  ASTERISK-25137 #close
	  Reported-by: Vitezslav Novy

	  ASTERISK-25116 #close
	  Reported-by: George Joseph <george.joseph@fairview5.com>
	  Tested-by: George Joseph <george.joseph@fairview5.com>

	  Change-Id: Ie47784adfb973ab0063e59fc18f390d7dd26d17b

2015-12-27 22:38 +0000 [6b08f01c60]  Corey Farrell <git@cfware.com>

	* Remove res_jabber file that was left behind.

	  Change-Id: I9d88fac0394d5bbaff0900a2ee911c4e4478846b

2015-12-26 09:24 +0000 [d4b10cfb3e]  Ward van Wanrooij <ward@ward.nu>

	* chan_sip: option 'notifyringing' change and doc fix

	  In the sample sip.conf this is written with regard to notifyringing:
	  ;notifyringing = no ; Control whether subscriptions already INUSE get sent
	  RINGING when another call is sent (default: yes)

	  However, this setting changes whether or not any RINGING indications are sent
	  to subscriptions. There is no separate configurable setting that allows
	  to control whether INUSE subscriptions also get sent RINGING. This is however
	  a useful option, to see (using BLF) if somebody else is able to handle an
	  incoming call or if everybody is busy.

	  This patch corrects the documentation for notifyringing (so the documentation
	  matches the functionality) and make notifyringing a tri-state option, by adding
	  the value 'notinuse' (in addition to 'yes' and 'no'). When notifyringing =
	  notinuse, only subscriptions that are not INUSE are sent the RINGING signal.

	  The default setting for notifyringing remains set to yes, so the default
	  behaviour is not affected.

	  ASTERISK-25558

	  Change-Id: I88f7036ee084bb3f43b74f15612695c6708f74aa

2015-12-25 09:56 +0000 [6dc21bbf00]  Dade Brandon <dade@xencall.com>

	* chan_sip.c: fix websocket_write_timeout default value

	  websocket_write_timeout was not being set to its default value
	  during sip config reload, which meant that prior to this commit,
	  1) the default value of 100 was not used, unless an invalid value
	  (or 1) was specified in sip.conf for websocket_write_timeout, and
	  2) if the websocket_write_timeout directive was removed from sip.conf
	  without a full restart of asterisk, then the previous value would
	  continue to be used indefinitely.

	  This essentially lead to a 0ms write timeout (the first write attempt
	  in ast_careful_fwrite must have succeeded) in websocket write requests
	  from chan_sip, unless websocket_write_timeout was explicitely set in sip.conf.

	  Changes to websocket_write_timeout still only apply to new websocket
	  sessions, after the sip reload -- timeouts on existing sessions are
	  not adjusted during sip reload.

	  Change-Id: Ibed3816ed29cc354af6564c5ab3e75eab72cb953

2015-12-23 17:40 +0000 [8eb5da0679]  Richard Mudgett <rmudgett@digium.com>

	* bridge_basic.c: Fix GOTO_ON_BLINDXFR

	  Use of GOTO_ON_BLINDXFR would not work at all.  The target location would
	  never be executed by the transferring channel.

	  * Made feature_blind_transfer() call ast_bridge_set_after_go_on() with
	  valid context, exten, and priority parameters from the transferring
	  channel.

	  * Renamed some feature_blind_transfer() local variables for clarity.

	  ASTERISK-25641 #close
	  Reported by Dmitry Melekhov

	  Change-Id: I19bead9ffdc4aee8d58c654ca05a198da1e4b7ac

2015-12-24 12:19 +0000 [2df4ad647c]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_location: Delete contact_status object when contact is deleted

	  In 450579e908, a change was made that removed the deletion of the
	  'contact_status' object when a 'contact' object is deleted in sorcery.
	  This unfortunately means that the 'contact_status' object persists, even when
	  something has explicitly removed a contact. The result is that the state of
	  the contact will not be regenerated if that contact is re-created, and the
	  stale state will be reported/used for that contact. It also results in
	  no ContactStatusChanged events being generated for either ARI or AMI.

	  This patch restores the deletion logic that was removed. Doing so now
	  results in the expected events being generated again.

	  Change-Id: I28789a112e845072308b5b34522690e3faf58f07

2015-12-24 10:18 +0000 [b8876711f3]  Kevin Harwell <kharwell@digium.com>

	* res_rtp_asterisk: rtp->ice check not wrapped in HAVE_PJPROJECT ifdef

	  Change-Id: I19b49112e1b630bd04e859f14ccf96f8ebd6b151

2015-12-20 21:33 +0000 [ca394161cf]  Dade Brandon <dade@xencall.com>

	* app_amd: Correct maximum_number_of_words functionality & documentation

	  - The maximum_number_of_words was previously documented as being
	  the number of words that when exceeded, would result in the AMD
	  application returning that the audio represents a machine.

	  This was inconsistent with its actual functionality - it was
	  a number of words that when REACHED, would result in determination
	  as a machine.

	  This update corrects the functionality to match the previously
	  documented functionality.  This is a backwards incompatible change
	  in configuration file, and has been added to UPGRADE.txt as a result.

	  The sample configuration file and application defaults have been updated
	  so that the default value is now 2, which reflects the same default
	  functionality as previous versions.

	  - Update documentation for silence_threshold, which previously implied
	  that it was measuring time, rather than noise averages in the sample.

	  - Update the comments in amd.conf.sample.

	  ASTERISK-25639 #close
	  Change-Id: I4b1451e5dc9cb3cb06d59b6ab872f5275ba79093

2015-12-17 19:05 +0000 [648ca2b1b8]  Dade Brandon <dade@xencall.com>

	* res_rtp_asterisk: Resolve further timing issues with DTLS negotiation

	  Resolves an edge case dtls negotiation delay for certain networks which
	  somehow manage to drop the rtcp side's packet when these are both sent
	  ast_rtp_remote_address_set, causing it to have to time-out and restart
	  the handshake.

	  Move dtls pending bio flush in to it's own function, and call it from
	  ast_rtp_on_ice_complete, when we're rtp->ice, rather than when
	  ast_rtp_remote_address_set.

	  Keep the existing flush from the recent change to res_rtp_remote_address_set
	  if ice is not being used.

	  ASTERISK-25614 #close
	  Reported-by: XenCALL
	  Tested by: XenCALL

	  Change-Id: Ie2caedbdee1783159f375589b6fd3845c8577ba5

2015-12-05 10:01 +0000 [902309fd04]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_memory_cache: Add support for a full backend cache.

	  This change introduces the configuration option 'full_backend_cache'
	  which changes the cache to be a full mirror of the backend instead
	  of a per-object cache. This allows all sorcery retrieval operations
	  to be carried out against it and is useful for object types which
	  are used in a "retrieve all" or "retrieve some" pattern.

	  ASTERISK-25625 #close

	  Change-Id: Ie2993487e9c19de563413ad5561c7403b48caab5

2015-12-17 10:25 +0000 [a2431f83ef]  Joshua Colp <jcolp@digium.com>

	* rtp_engine: Ignore empty filenames in DTLS configuration.

	  When applying an empty DTLS configuration the filenames in the
	  configuration will be empty. This is actually valid to do and
	  each filename should simply be ignored.

	  Change-Id: Ib761dc235638a3fb701df337952f831fc3e69539

2015-12-17 08:10 +0000 [d2c8614122]  Joshua Colp <jcolp@digium.com>

	* chan_sip: Enable WebSocket support by default.

	  Per the documentation the WebSocket support in chan_sip is
	  supposed to be enabled by default but is not. This change
	  corrects that.

	  Change-Id: Icb02bbcad47b11a795c14ce20a9bf29649a54423

2015-12-14 12:04 +0000 [d17d9a9288]  Joshua Colp <jcolp@digium.com>

	* json: Audit ast_json_* usage for thread safety.

	  The JSON library Asterisk uses, jansson, is not thread
	  safe for us in a few ways. To help with this wrappers for JSON
	  object reference count increasing and decreasing were added
	  which use a global lock to ensure they don't clobber over
	  each other. This does not extend to reference count manipulation
	  within the jansson library itself. This means you can't safely
	  use the object borrowing specifier (O) in ast_json_pack and
	  you can't share JSON instances between objects.

	  This change removes uses of the O specifier and replaces them
	  with the o specifier and an explicit ast_json_ref. Some cases
	  of instance sharing have also been removed.

	  ASTERISK-25601 #close

	  Change-Id: I06550d8b0cc1bfeb56cab580a4e608ae4f1ec7d1

2015-12-16 11:28 +0000 [cfb34adb83]  Mark Michelson <mmichelson@digium.com>

	* Alembic: Increase column size of PJSIP AOR "contact".

	  When running the PJSIP AMI "show_endpoint" test with automatic
	  conversion to realtime, the test would fail. This was because the AOR
	  "contact" column was sized at 40, and the configured contact was larger
	  than that.

	  This commit increases the size of the contact column to 255 characters.

	  Change-Id: Ia65bc7fd37699b7c0eaef9629a1a31eab9a24ba1

2015-12-14 13:53 +0000 [32ec83f37f]  server-pandora <server-pandora@xencall.com>

	* res_rtp_asterisk.c: Fix DTLS negotiation delays.

	  - Trigger pending DTLS packets to send out, once the RTP instance's remote
	    address is set.
	  - Avoids locking the DTLS structure unnecessarily by only doing this if
	    DTLS is passive.
	  - Add DTLS locks around the structurally sensitive calls in the SSL
	    portion of __rtp_recvfrom, since dtls_srtp_check_pending does not lock
	    inside of itself, and we're dealing with the SSL BIO in at least two
	    threads.

	  WebRTC channels may receive a DTLS handshake before
	  ast_rtp_remote_address_set is called, which causes there to be a pending
	  response to send out.   Previous to 1ad827, this was handled by calling
	  dtls_srtp_check_pending on receipt of any RTP packet - a STUN or RTP
	  packet could trigger the pending handshake response.  Since that was
	  rightfully removed, whenever the DTLS handshake is received before the
	  remote address is set, we would have to wait until another SSL packet
	  arrives.

	  As of Chrome M47's optimizations to their handshake process, WebRTC
	  conversations between Chrome M47+ and Asterisk, where Asterisk is passive,
	  experience a 1 second delay without this patch, because the SSL handshake
	  is received before ICE negotation stores the remote_address, and the next
	  SSL packet isn't received until after a 1 second timeout in Chrome, which
	  causes a new handshake request.

	  ASTERISK-25614 #close

	  Change-Id: I547f1be7e302dbf71f6553dd8cbc0657b1d0b908

2015-12-08 13:04 +0000 [52ca6fb94a]  sungtae kim <pchero21@gmail.com>

	* AMI: Fixed OriginateResponse message

	  When the asterisk sending OriginateResponse message,
	  it doesn't set the "Uniqueid".
	  And it didn't support correct response message for
	  Application originate.

	  ASTERISK-25624 #close

	  Change-Id: I26f54f677ccfb0b7cfd4967a844a1657fd69b74d

2015-12-14 15:25 +0000 [eccdf2250b]  Richard Mudgett <rmudgett@digium.com>

	* Fix sscanf() format string type mismatch.

	  ASTERISK-25615
	  Reported by: George Joseph

	  Change-Id: Ieff35307254ca193f3d473cff2e396ca57c7ce0b

2015-12-14 06:26 +0000 [3e7522533c]  Carlos Oliva <carlos.oliva@invoxcontact.com>

	* app_queue: update RT members when the 1st call joins a queue with no agents

	  If a call enters on a queue and the members on that queue are updated in
	  realtime (ex: using mysql inserting a new agent) the queue members are
	  never refreshed and the call will stay in the queue until other event occurs.
	  This happens only if this is the first call of the queue and there is no
	  agents servicing.
	  This patch prevent this issue, ensuring realtime members are updated if
	  there is one call in the queue and no available agents

	  ASTERISK-25442 #close

	  Change-Id: If1e036d013a5c1d8b0bf60d71d48fe98694a8682

2015-12-13 13:13 +0000 [9a96a86e2d]  Matt Jordan <mjordan@digium.com>

	* main/utils: Don't emit an ERROR message if the read end of a pipe closes

	  An ERROR or WARNING message should generally indicate that something has gone
	  wrong in Asterisk. In the case of writing to a file descriptor, Asterisk is not
	  in control of when the far end closes its reading on a file descriptor. If the
	  far end does close the file descriptor in an unclean fashion, this isn't a bug
	  or error in Asterisk, particularly when the situation can be gracefully
	  handled in Asterisk.

	  Currently, when this happens, a user would see the following somewhat cryptic
	  ERROR message:

	    "utils.c: write() returned error: Broken pipe"

	  There's a few problems with this:
	  (1) It doesn't provide any context, other than 'something broke a pipe'
	  (2) As noted, it isn't actually an error in Asterisk
	  (3) It can get rather spammy if the thing breaking the pipe occurs often, such
	      as a FastAGI server
	  (4) Spammy ERROR messages make Asterisk appear to be having issues, or can even
	      mask legitimate issues

	  This patch changes ast_carefulwrite to only log an ERROR if we actually had one
	  that was reasonably under our control. For debugging purposes, we still emit
	  a debug message if we detect that the far side has stopped reading.

	  Change-Id: Ia503bb1efcec685fa6f3017bedf98061f8e1b566

2015-12-12 11:08 +0000 [3e6637feb5]  gtjoseph <george.joseph@fairview5.com>

	* pjsip/config_transport: Check pjproject version at runtime for async ops

	  pjproject < 2.5.0 will segfault on a tls transport if async_operations
	  is greater than 1.  A runtime version check has been added to throw
	  an error if the version is < 2.5.0 and async_operations > 1.

	  To assist in the check, a new api "ast_compare_versions" was added
	  to utils which compares 2 major.minor.patch.extra version strings.

	  ASTERISK-25615 #close

	  Change-Id: I8e88bb49cbcfbca88d9de705496d6f6a8c938a98
	  Reported-by: George Joseph
	  Tested-by: George Joseph

2015-12-10 11:44 +0000 [ceebdfce40]  Jonathan Rose <jrose@digium.com>

	* chan_sip: Add TCP/TLS keepalive to TCP/TLS server

	  Adds the TCP Keep Alive option to TCP and TLS server sockets. Previously
	  this option was only being set on session sockets.
	  http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/
	  According to the link above, the SO_KEEPALIVE option is useful for knowing
	  when a TCP connected endpoint has severed communication without indicating
	  it or has become unreachable for some reason. Without this patch, keep
	  alive is not set on the socket listening for incoming TCP sessions and
	  in Komatsu's report this resulted in the thread listening for TCP becoming
	  stuck in a waiting state.

	  ASTERISK-25364 #close
	  Reported by: Hiroaki Komatsu

	  Change-Id: I7ed7bcfa982b367dc64b4b73fbd962da49b9af36
2015-12-07 13:07 +0000 [fcaebb0e43]  Corey Farrell <git@cfware.com>

	* app_meetme: Set default value for audio_buffers.

	  The default value was never set for audio_buffers, causing bad
	  audio quality.  This ensures the default is always set.

	  ASTERISK-25569 #close

	  Change-Id: I2d2ee3e644120b0f9f6ea6ab9286d7d590942a44
2015-12-09 09:48 +0000 [5790700497]  Tyler Cambron <tcambron@digium.com>

	* res_chan_stats: Fix bug to send correct statistics to StatsD

	  Fixed a bug that originally would show a negative number of
	  active calls occuring in Asterisk. A gauge is persistent so
	  incrementing and decrementing it results in a more consistent
	  performance. Also changed to the call to StatsD to use
	  ast_statsd_log_string() so that a "+" could be sent to StatsD.

	  ASTERISK-25619 #close

	  Change-Id: Iaaeff5c4c6a46535366b4d16ea0ed0ee75ab2ee7
2015-12-08 17:49 +0000 [a987434564]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Add existence and readablity checks for tls related files

	  Both transport and endpoint now check for the existence and readability
	  of tls certificate and key files before passing them on to pjproject.
	  This will cause the object to not load rather than waiting for pjproject
	  to discover that there's a problem when a session is attempted.

	  NOTE: chan_sip also uses ast_rtp_dtls_cfg_parse but it's located
	  in build_peer which is gigantic and I didn't want to disturb it.
	  Error messages will emit but it won't interrupt chan_sip loading.

	  ASTERISK-25618 #close

	  Change-Id: Ie43f2c1d653ac1fda6a6f6faecb7c2ebadaf47c9
	  Reported-by: George Joseph
	  Tested-by: George Joseph

2015-12-02 12:42 +0000 [be693539c3]  Eugene Voityuk <eugene@thirdlane.com>

	* chan_sip.c: Start ICE negotiation when response is sent or received.

	  The current logic for ICE negotiation starts it
	  when receiving an SDP with ICE candidates. This is
	  incorrect as ICE negotiation can only start when each 
	  call party have at least one pair of local and remote 
	  candidate. Starting ICE negotiation early would result 
	  in negotiation failure and ultimately no audio.

	  This change makes it so ICE negotiation is only started
	  when a response with SDP is received or when a response
	  with SDP is sent.

	  ASTERISK-24146

	  Change-Id: I55a632bde9e9827871b09141d82747e08379a8ca

2015-12-08 01:57 +0000 [59a91c350a]  Filip Jenicek <phill@janevim.cz>

	* chan_sip: Check sip_pvt pointer in ast_channel_get_t38_state(c)

	  Asterisk may crash when calling ast_channel_get_t38_state(c)
	  on a locked channel which is being hung up.

	  ASTERISK-25609 #close

	  Change-Id: Ifaa707c04b865a290ffab719bd2e5c48ff667c7b
2015-12-08 11:03 +0000 [28ab03fbf7]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip/config_transport: Prevent async_operations > 1 when protocol = tls

	  See ASTERISK-25615.
	  If the transport protocol is tls and async_operations > 1, pjproject
	  will segfault if more than one operation is attempted on the same socket.
	  Until this is fixed upstream, a check has been added to throw an error
	  if a tls transport config has async_operations set to > 1.

	  ASTERISK-25615

	  Change-Id: I76b9a5b2a5a0054fe71ca5851e635f2dca7685a6
	  Reported-by: George Joseph
	  Tested-by: George Joseph

2015-12-08 08:39 +0000 [55dd7125b3]  Alexander Traud <pabstraud@compuserve.com>

	* codec_resample: Increase buffer for Opus Codec with FEC.

	  ASTERISK-25599 #close

	  Change-Id: Idbd187f711b2ec63dda949ca0f79aa0c1a0a0b6e

2015-12-08 03:46 +0000 [64f899e5f3]  Alexander Traud <pabstraud@compuserve.com>

	* translate: Avoid a warning message when doing FEC within Opus Codec.

	  ASTERISK-25616 #close

	  Change-Id: Ibe729aaf2e6e25506cff247cec5149ec1e589319

2015-12-04 15:36 +0000 [65c8147952]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip: Fix crash involving the bogus peer during sip reload.

	  A crash happens sometimes when performing a CLI "sip reload".  The bogus
	  peer gets refreshed while it is in use by a new call which can cause the
	  crash.

	  * Protected the global bogus peer object with an ao2 global object
	  container.

	  ASTERISK-25610 #close

	  Change-Id: I5b528c742195681abcf713c6e1011ea65354eeed

2015-11-13 07:58 +0000 [48c065e46d]  Christof Lauber <christof.lauber@annax.ch>

	* chan_sip: Support parsing of Q.850 reason header in SIP BYE and CANCEL requests.

	  Current support for reason header did work only in SIP responses.
	  According to RFC3336 the reason header might appear in any SIP request.
	  But it seems to make most sence in BYE and CANCEL so parasing is done
	  there too (if use_q850_reason=yes).

	  Change-Id: Ib6be7b34c23a76d0e98dfd0816c89931000ac790

2015-12-06 16:35 +0000 [75c800eb28]  Matt Jordan <mjordan@digium.com>

	* Revert "bridges/bridge_t38: Add a bridging module for managing T.38 state"

	  This reverts commit f42d22d3a1ca5c8ea73df99a50c6a28caa8f8749.

	  Unfortunately, using a bridge to manage T.38 state will cause severe deadlocks
	  in core_unreal/chan_local. Local channels attempt to reach across both their
	  peer and the peer's bridge to inspect T.38 state. Given the propensity of
	  Local channel chains, managing the locking situation in such a scenario is
	  practically infeasible.

	  Change-Id: I932107387c13aad2c75a7a4c1e94197a9d6d8a51

2015-12-04 16:23 +0000 [4be231e82f]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip/contacts/statsd:  Make contact lifecycle events more consistent

	  It will never be perfect or even pretty, mostly because of the differences
	  between static and dynamic contacts.

	  Created:

	  Can't use the contact or contact_status alloc functions
	  because the objects come and go regardless of the actual state.

	  Can't use the contact_apply_handler, ast_sip_location_add_contact or
	  a sorcery created handler because they only get called for dynamic
	  contacts.  Similarly, permanent_uri_handler only gets called for
	  static contacts.

	  So, Matt had it right. :)  ast_res_pjsip_find_or_create_contact_status is
	  the only place it can go and not have duplicated code.  Both
	  permanent_uri_handler and contact_apply_handler call find_or_create.

	  Removed:

	  Can't use the destructors for the same reason as above.  The only
	  place to put this is in persistent_endpoint_contact_deleted_observer
	  which I believe is the "correct" place but even that will handle only
	  dynamic contacts.  This doesn't called on shutdown however.  There is
	  no hook to use for static contacts that may be removed because of a
	  config change while asterisk is in operation.

	  I moved the cleanup of contact_status from ast_sip_location_delete_contact
	  to the handler as well.

	  Status Change and RTT:

	  Although they worked fine where they were (in update_contact_status) I
	  moved them to persistent_endpoint_contact_status_observer to make it
	  more consistent with removed.  There was logic there already to detect
	  a state change.

	  Finally, fixed a nit in permanent_uri_handler rmudgett reported
	  eralier.

	  ASTERISK-25608 #close

	  Change-Id: I4b56e7dfc3be3baaaf6f1eac5b2068a0b79e357d
	  Reported-by: George Joseph
	  Tested-by: George Joseph

2015-11-21 06:08 +0000 [63c6d39a3e]  Alexander Traud <pabstraud@compuserve.com>

	* res_format_attr_vp8: In SDP, forward max-fr and max-fs for video-codec VP8.

	  ASTERISK-25584 #close

	  Change-Id: Iae00071b4ff1ae76f24995aeac4d00284fd14f91

2015-11-28 08:46 +0000 [f42d22d3a1]  Matt Jordan <mjordan@digium.com>

	* bridges/bridge_t38: Add a bridging module for managing T.38 state

	  When 4875e5ac32 was merged, it fixed several issues with a direct media bridge
	  transitioning to handling a T.38 fax. However, it uncovered a race condition
	  caused by the bridging core. When a channel involved in a T.38 fax leaves a
	  bridge, the frame queued by the channel driver that should inform the far side
	  that it is no longer in a T.38 fax may not make it across the bridge. The
	  bridging framework is *extremely* aggressive in tearing down the bridge, and
	  control frames that are currently in flight *may* get dropped.

	  This patch adds a new module to the bridging framework, bridge_t38. This module
	  maintains some notion of the T.38 state for the two channels in a bridge. When
	  the bridge detects that it is being torn down or when one of the two channels
	  leaves, it informs the respective channel(s) that they should stop faxing. This
	  ensures that channels switch back to audio if they survive and are ejected out
	  of a bridge while faxing.

	  ASTERISK-25582

	  Change-Id: If5b0bb478eb01c4607c9f4a7fc17c7957d260ea0

2015-11-21 05:35 +0000 [dcc01bc0a7]  Alexander Traud <pabstraud@compuserve.com>

	* res_format_attr_opus: Update to latest RFC 7587.

	  Beside that, the format-attribute module sends only non-default values in the
	  line fmtp, now. This avoids unnecessary overhead in SDP messages. Furthermore,
	  previously the parameter stereo was not parsed when being the first parameter.

	  ASTERISK-25583 #close

	  Change-Id: Iae85ba3e5960bfd5d51cf65bcffad00dd4875a73
2015-12-02 14:11 +0000 [69457b8d61]  Jonathan Rose <jrose@digium.com>

	* Fix crash in audiohook translate to slin

	  This patch fixes a crash which would occur when an audiohook was
	  applied to a channel using an audio codec that could not be translated
	  to signed linear (such as when using pass-through codecs like OPUS or
	  when the codec translator module for the format in use is not loaded).

	  ASTERISK-25498 #close
	  Reported by: Ben Langfeld

	  Change-Id: Ib6ea7373fcc22e537cad373996136636201f4384
2015-12-03 12:07 +0000 [5959186017]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip: Use a MD5 hash for static Contact IDs

	  When 90d9a70789 was merged, it mostly tested dynamic contacts created as
	  a result of registering a PJSIP endpoint. Contacts generated in this
	  fashion typically have a long alphanumeric string as their object identifier,
	  which maps reasonably well for StatsD. Unfortunately, this doesn't work in the
	  general case. StatsD treats both '.' and ':' characters as special characters.
	  In particular, having a ':' appear in the middle of a StatsD metric will
	  result in the metric being rejected.

	  This causes some obvious issues with SIP URIs.

	  The StatsD API should not be responsible for escaping the metric name passed
	  to it. The metric is treated as a single long string, and it would be
	  challenging to know what to escape in the string passed to the function.
	  Likewise, we don't want to escape the metric in PJSIP, as that involves
	  overhead that is wasted when either res_statsd isn't loaded or enabled.

	  This patch takes an alternative approach. The Contact ID has been changed
	  to be "aor@@uri_hash" instead of "aor@@uri". This (a) won't contain any of the
	  aforementioned special characters, (b) can be done on Contact creation,
	  which has minimal impact on run-time performance, and (c) also conforms to an
	  earlier commit that changed the ID for dynamic contacts.

	  The downside of this is that StatsD users will have to map SHA1 hashes back to
	  the Contacts that are emitting the statistics. To that end, the CLI commands
	  have been updated to include the first 10 characters of the MD5 hash, which
	  should be enough to match what is shown in Graphite (or some other StatsD
	  backend).

	  ASTERISK-25595 #close

	  Change-Id: Ic674a3307280365b4a45864a3571c295b48a01e2
	  Reported-by: Matt Jordan
	  Tested-by: George Joseph

2015-11-30 22:19 +0000 [bd265a90be]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Update logging to show contact->uri in messages

	  An earlier commit changed the id of dynamic contacts to contain
	  a hash instead of the uri.  This patch updates status change
	  logging to show the aor/uri instead of the id.  This required
	  adding the aor id to contact and contact_status and adding
	  uri to contact_status.  The aor id gets added to contact and
	  contact_status in their allocators and the uri gets added to
	  contact_status in pjsip_options when the contact_status is
	  created or updated.

	  ASTERISK-25598 #close

	  Reported-by: George Joseph
	  Tested-by: George Joseph

	  Change-Id: I56cbec1d2ddbe8461367dd8b6da8a6f47f6fe511

2015-12-01 16:11 +0000 [b5281b74e0]  Jonathan Rose <jrose@digium.com>

	* Unset BRIDGEPEER when leaving a bridge

	  Currently if a channel is transferred out of a bridge, the BRIDGEPEER
	  variable (also BRIDGEPVTCALLID) remain set even once the channel is
	  out of the bridge. This patch removes these variables when leaving
	  the bridge.

	  ASTERISK-25600 #close
	  Reported by: Mark Michelson

	  Change-Id: I753ead2fffbfc65427ed4e9244c7066610e546da

2015-11-30 14:22 +0000 [59ba84e5cd]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_memory_cache.c: Fix off nominal ref leak.

	  Change-Id: If83d63cf11cbc6df9b15251848b01feb570ade49

2015-11-30 16:42 +0000 [ef77439e39]  Richard Mudgett <rmudgett@digium.com>

	* sched.c: Make not return a sched id of 0.

	  According to the API doxygen a sched ID of 0 is valid.  Unfortunately, 0
	  was never returned historically and several users incorrectly coded usage
	  of the returned sched ID assuming that 0 was invalid.

	  ASTERISK-25476

	  Change-Id: Ib19c7ebb44ec9fd393ef6646dea806d4f34e3a20

2015-11-25 12:23 +0000 [145d10a5d0]  Richard Mudgett <rmudgett@digium.com>

	* Audit improper usage of scheduler exposed by 5c713fdf18f. (v13 additions)

	  chan_sip.c:
	  * Initialize mwi subscription scheduler ids earlier because of ASTOBJ to
	  ao2 conversion.

	  * Initialize register scheduler ids earlier because of ASTOBJ to ao2
	  conversion.

	  chan_skinny.c:
	  * Fix more scheduler usage for the valid 0 id value.

	  ASTERISK-25476

	  Change-Id: If9f0e5d99638b2f9d102d1ebc9c5a14b2d706e95

2015-11-24 12:44 +0000 [fa20729032]  Richard Mudgett <rmudgett@digium.com>

	* Audit improper usage of scheduler exposed by 5c713fdf18f.

	  channels/chan_iax2.c:
	  * Initialize struct chan_iax2_pvt scheduler ids earlier because of
	  iax2_destroy_helper().

	  channels/chan_sip.c:
	  channels/sip/config_parser.c:
	  * Fix initialization of scheduler id struct members.  Some off nominal
	  paths had 0 as a scheduler id to be destroyed when it was never started.

	  chan_skinny.c:
	  * Fix some scheduler id comparisons that excluded the valid 0 id.

	  channel.c:
	  * Fix channel initialization of the video stream scheduler id.

	  pbx_dundi.c:
	  * Fix channel initialization of the packet retransmission scheduler id.

	  ASTERISK-25476

	  Change-Id: I07a3449f728f671d326a22fcbd071f150ba2e8c8

2015-12-01 07:55 +0000 [b24f2f4c2e]  Alexander Traud <pabstraud@compuserve.com>

	* codec_resample: Increase buffer for Opus Codec.

	  ASTERISK-25599 #close

	  Change-Id: I1f88a88c59fb4e1e62bbdbb100c7152d48e73f10

2015-11-30 11:13 +0000 [e5723d2776]  gtjoseph <george.joseph@fairview5.com>

	* dns: Change lookup failures from LOG_ERROR to debug 1.

	  dns.c and dns_system_resolver.c were spitting out errors for lookup
	  failures for things like not finding a SRV record even though
	  there was an A record.  Those have been changed to debug messages.
	  Logging not finding ANY record is left to the higher level caller.

	  Also, dns_system_resolver was using Windows line endings so I
	  converted them to Unix style.  The actual log changes are on lines
	  156 and 159.

	  Change-Id: I65be16ea15304b96f9dcb4d289dbd3e2286fc094

2015-11-25 10:42 +0000 [270f7be54f]  Alexander Traud <pabstraud@compuserve.com>

	* Build System: Support include-what-you-use.

	  ASTERISK-25591 #close

	  Change-Id: I8d3efa0826142ece9cbed2fd0d46f3b607fee6ae

2015-11-08 23:49 +0000 [f2a84b500d]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: Show reason of pause on CLI

	  Add value of pause reason when is paused on CLI command "queue show"

	  ASTERISK-25581 #close

	  Report by: Rodrigo Ramírez Norambuena

	  Change-Id: I887028a40cd97b350da9a3bb2719616b7fec9864

2015-11-27 07:39 +0000 [7cb8f2f33e]  Niklas Larsson <niklas@tese.se>

	* CHANGES: Fix a typo

	  Change-Id: Iceb3d9bb78140c376174a7bee197dfcf8ef9cda7

2015-11-25 15:26 +0000 [9014f1f4a5]  Kevin Harwell <kharwell@digium.com>

	* fastagi: record file closed after sending result

	  The fastagi record-file testsuite test sometimes fails reporting an empty
	  recorded file. This was happening because Asterisk was sending the agi result
	  notification prior to actually closing the file and the data, being buffered,
	  had not been written to the file yet when the test attempts to check the file
	  size.

	  This patch makes it so the record file stream is closed prior to sending the
	  agi result notification.

	  ASTERISK-25593 #close

	  Change-Id: I6b2b3be3ae37f7c7b18e672c419a89b3b8513cde

2015-11-25 13:29 +0000 [03759c5587]  Walter Doekes <walter+asterisk@wjd.nu>

	* main: Slight refactor of main. Improve color situation.

	  Several issues are addressed here:
	  - main() is large, and half of it is only used if we're not rasterisk;
	    fixed by spliting up the daemon part into a separate function.
	  - Call ast_term_init from rasterisk as well.
	  - Remove duplicate code reading/writing asterisk history file.
	  - Attempt to tackle background color issues and color changes that
	    occur. Tested by starting asterisk -c until the colors stopped
	    changing at odd locations.
	  - Remove unused term_prep() and term_prompt() functions.

	  ASTERISK-25585 #close

	  Change-Id: Ib641a0964c59ef9fe6f59efa8ccb481a9580c52f

2015-11-24 13:54 +0000 [91346b9fb7]  David M. Lee <dlee@respoke.io>

	* Fixed some typos

	  Fixes some minor typos in the CHANGES file, plus an embarrasing typo in
	  the StatsD API.

	  Change-Id: I9ca4858c64a4a07d2643b81baa64baebb27a4eb7

2015-11-24 13:07 +0000 [fb45130476]  Corey Farrell <git@cfware.com>

	* res_pjsip_notify: Fix CLI usage info

	  The usage info for 'pjsip send notify' previously referenced the
	  chan_sip configuration sip_notify.conf.  Fix this to reference
	  the correct configuration pjsip_notify.conf.

	  ASTERISK-25590 #close

	  Change-Id: I3898271a8e8a8b1db201741e790ebe2c6bf5cdea

2015-11-18 09:43 +0000 [ee9c114747]  Matt Jordan <mjordan@digium.com>

	* res/res_endpoint_stats: Add module to emit endpoint StatsD statistics

	  This patch adds a module that emits StatsD statistics about Asterisk
	  endpoints. This includes:
	   * A GAUGE statistic for endpoint states, tracking how many endpoints are in
	     a particular state.
	   * A GAUGE statistic for each endpoint, counting the number of channels
	     currently associated with an endpoint.

	  ASTERISK-25572

	  Change-Id: If7e1333c5aeda8d136850b30c2101c0ee1c97305
2015-11-23 14:27 +0000 [9ca652f1b9]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_realtime.c: Fix crash from NULL sorcery object type.

	  If the sorcery object type is not found a NULL is returned.
	  Unfortunately, sorcery_realtime_filter_objectset() will crash after
	  complaining about not finding the object type and saying to expect errors.

	  * Use ao2_cleanup() instead of ao2_ref() to prevent the crash.

	  ASTERISK-25165
	  Reported by Corey Farrell

	  Change-Id: Ic3b64453ea3058cb68d5c26d97d4fe7b8eea2e97

2015-11-18 10:07 +0000 [75d90a9951]  Matt Jordan <mjordan@digium.com>

	* res_pjsip/pjsip_options: Add StatsD statistics for PJSIP contacts

	  This patch adds the ability to send StatsD statistics related to the
	  state of PJSIP contacts. This includes:
	   * A GUAGE statistic measuring the count of contacts in a particular state.
	     This measures how many contacts are reachable, unreachable, etc.
	   * The RTT time for each contact, if those contacts are qualified. This
	     provides StatsD engines useful time-based data about each contact.

	  ASTERISK-25571

	  Change-Id: Ib8378d73afedfc622be0643b87c542557e0b332c

2015-11-13 10:34 +0000 [482f2fc5ff]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_outbound_registration: Add registration statistics for StatsD

	  This patch adds outbound registration statistics for StatsD. This includes
	  the following:
	   * A GUAGE metric for the overall count of outbound registrations.
	   * A GUAGE metric for each state an outbound registration can be in. As the
	     outbound registrations change state, the overall count of how many
	     outbound registrations are in the particular state is changed.

	  These statistics are particularly useful for systems with a large number of
	  SIP trunks, and where measuring the change in state of the trunks is useful
	  for monitoring.

	  ASTERISK-25571

	  Change-Id: Iba6ff248f5d1c1e01acbb63e9f0da1901692eb37

2015-11-18 10:05 +0000 [97d7b344de]  Matt Jordan <mjordan@digium.com>

	* res_statsd: Add functions that support variable arguments

	  Often, the metric names of statistics we are generating for StatsD have some
	  dynamic component to them. This can be the name of a particular resource, or
	  some internal status label in Asterisk. With the current set of functions,
	  callers of the statsd API must first build the metric name themselves, then
	  pass this to the API functions. This results in a large amount of boilerplate
	  code and usage of either fixed length static buffers or dynamic memory
	  allocation, neither of which is desireable.

	  This patch adds two new functions to the StatsD API that support a printf
	  style format specifier for constructing the metric name. A dynamic string,
	  allocated in threadstorage, is used to build the metric name. This eases
	  the burden on users of the StatsD API.

	  Change-Id: If533c72d1afa26d807508ea48b4d8c7b32f414ea

2015-11-20 21:08 +0000 [726ee873a6]  Matt Jordan <mjordan@digium.com>

	* chan_pjsip: Handle T.38 faxes with direct media bridges

	  When a channel is in a direct media bridge, a re-INVITE may arrive that forces
	  Asterisk to re-negotiate the media to a T.38 fax. When this occurs, the bridge
	  must change its technology to a simple bridge, and re-INVITE the media back
	  to Asterisk.

	  Generally, this logic mostly already exists in Asterisk. However, prior to this
	  patch, there were a few bugs:
	  (1) The T.38 framehook currently prevents a channel capable of T.38 faxes from
	      ever entering into a direct media bridge. This applies even when the only
	      media being passed over the channel is audio. This patch fixes this bug
	      by having the framehook specify that it defers caring about any frame type.
	      This allows the channels to enter into a direct media bridge, which will
	      be broken when a re-INVITE is received.
	  (2) When a re-INVITE is received, nothing instructed the bridging layer to
	      re-inspect the allowed bridging technology. This now occurs when either
	      a re-INVITE is received from a peer, or when a response is received from
	      the far end (that is, when the T.38 state changes to either
	      T38_PEER_REINVITE or T38_LOCAL_REINVITE).
	  (3) chan_pjsip needs to do a small amount of work to prevent a direct media
	      bridge from being chosen when a T.38 session is in progress. When a T.38
	      session supplement has a t38 datastore - which is added when we detect
	      we should start thinking about T.38 on a channel - we now refuse a native
	      RTP bridge.
	  (4) When a BYE request is received, we don't terminate the T.38 session. If
	      the other side of a T.38 fax survives the hangup (due to the 'g' flag
	      in Dial, for example), we don't currently re-INVITE the media on the
	      other channel back to audio. This patch now has res_pjsip_t38 intercept
	      BYE requests and inform the far side that the T.38 session is terminated.
	      This naturally causes the correct re-INVITEs to be sent.

	  ASTERISK-25582

	  Change-Id: Iabd6aa578e633d16e6b9f342091264e4324a79eb

2015-10-22 09:44 +0000 [9315a93757]  Matt Jordan <mjordan@digium.com>

	* main/cli: Use proper string methods to check existence of context/exten/app

	  Because the context, extension, and application are stored in stringfields,
	  checking for them being NULL doesn't work so well. This patch uses the
	  appropriate string library call, ast_strlen_zero, to see if there is a value
	  in the context/exten/app values.

	  Change-Id: Ie09623bfdf35f5a8d3b23dd596647fe3c97b9a23

2015-11-20 21:07 +0000 [d2b141c79f]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_t38: Add debug statements

	  This patch adds some debug statements to res_pjsip_t38. These statements help
	  to determine which SDP negotiation callbacks are being executed, and, when
	  a particular callback exits, why a callback may not have applied its logic
	  to the local or remote SDP.

	  Change-Id: I61b3fb9183b7ebbb5da8e9f48b59a5d9d7042d77

2015-11-19 09:40 +0000 [1bca90fcbe]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_outbound_registration: Apply configuration on object type load

	  When Asterisk is configured to use a dynamic sorcery backend (such as
	  res_sorcery_astdb) with 'registration' objects, it will fail to create the
	  internal state objects associated with the registration objects on module
	  load. This is due to nothing actually querying for the specific objects
	  and calling their sorcery apply handler during module load.

	  This patch fixes that by calling get_registrations in the sorcery observer's
	  object_type_loaded handler. Doing this causes the sorcery backends to be
	  asked for the current state of all registration objects, which causes the
	  apply handler to be called and the internal run-time state to be created.

	  ASTERISK-25575 #close

	  Change-Id: Ie9306e797098c6d4da7bcf4a5434a15891508b23

2015-11-11 06:29 +0000 [8ccb1d2bed]  Alexander Traud <pabstraud@compuserve.com>

	* translate: Provide translation modules the result of SDP negotiation.

	  Previously, a trancoding module did not have access to the joint but cached
	  format. Therefore, the module did not have access to the attributes negotiated
	  via SDP (line fmtp). Now, a translation module receives the joint format.

	  ASTERISK-25545 #close

	  Change-Id: Id6878a989b50573298dab115d3371ea369e1a718

2015-11-19 01:03 +0000 [92ea46ba94]  Alexander Traud <pabstraud@compuserve.com>

	* res_format_attr_h264: Do not reset string buffer.

	  When no parameter is present, Asterisk does not generate the line fmtp, as
	  expected. However, because a buffer was reset, even rtpmap and fmtp of previous
	  media codecs got removed. Now, Asterisk does not reset other codecs in case of
	  no parameter for H.264.

	  ASTERISK-25573 #close

	  Change-Id: I93811331f4a28c45418a9e14ee46c0debd47a286

2015-11-18 02:25 +0000 [8c14b91651]  Alec Davis <sivad.a@paradise.net.nz>

	* app_bridgeaddchan: ability to barge into existing call

	  To be able to barge into a call by dialling a prefix+extension that maps
	  to the extensions device.

	  Senario is that DECT headset users may be away from their desks and need
	  to transfer the call, the goal is that from any phone they dial a prefix
	  then their extension and are added to the bridge that they are in, from
	  there they can drop the headset call, as it's also on the handset,
	  and transfer the caller.

	  The dialplan would look like, where prefix=73, extension = 8512;
	  exten => _738512,1,BridgeAdd(SIP/cisco0001)

	  ASTERISK-25551 #close
	  Reported By: Alec Davis

	  Change-Id: I8eb5096a02168dcc8d7aeea416ef36ba4ed10540

2015-11-05 15:37 +0000 [05addf3d8f]  Tyler Cambron <tcambron@digium.com>

	* StatsD: Add sample rate compatibility

	  Implemented support for the StatsD sample rate parameter,
	  which is a parameter for determining when to send computed
	  statistics to a client.

	  Valid sample rate values are:
	  Less than or equal to 0.0 will never be sent.
	  Between 0.0 and 1.0 will randomly be sent.
	  Greater than or equal to 1.0 will always be sent.

	  ASTERISK-25419
	  Reported By: Ashley Sanders

	  Change-Id: I11d315d0a5034fffeae1178e650aa8264485ed52

2015-11-17 14:53 +0000 [3dbaf696e9]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Be tolerant of short registration timeouts.

	  Change-Id: Ie16f5053ebde0dc6507845393709b4d6a3ea526d

2015-11-17 14:53 +0000 [eaf898ac88]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Fix 423 response handling.

	  Receiving a 423 Interval Too Brief response after authentication for an
	  outbound registration attempt results in assuming that the registrar has
	  rejected the registration permanently.  If there are no configured retries
	  for fatal responses then the outbound registration is stopped for that
	  endpoint.

	  For registrations, PJSIP/PJPROJECT intercepts the handling of 423
	  responses and does not include any authentication in the updated
	  registration request.  When the updated request is challenged then the
	  Asterisk code assumes that we were challenged again because the peer
	  rejected the authentication we sent earlier.

	  * Made registration challenges keep track of the CSeq number to determine
	  if the received challenge response was for the request we thought we sent.
	  If the response's CSeq number differs from the CSeq number we last sent
	  with authentication then authenticate again because it is a challenge to a
	  different request.

	  Change-Id: I81b4bd36d1be095bab606e34b8b44e6302971b09

2015-11-18 00:20 +0000 [4013f9d577]  Alec Davis <sivad.a@paradise.net.nz>

	* app_queue: (try_calling): mutex 'qe->chan' freed more times than we've locked!

	  commit aae45acbd (Mark Michelson 2015-04-15 10:38:02 -0500 6525)
	  refer ASTERISK-24958

	  above commit removed ast_channel_lock(qe->chan);
	  but failed to remove corresponding ast_channel_unlock(qe->chan);

	  ASTERISK-25561 #close
	  Reported Alec Davis

	  Change-Id: Ie05f4e2d08912606178bf1fded57cc022c7a2e1a

2015-11-16 16:10 +0000 [6919daab61]  gtjoseph <george.joseph@fairview5.com>

	* dns: Fix pointer increment in dns_parse_answer_ex

	  When dns_parse_answer_ex was iterating over the answers it
	  wasn't incrementing the answer pointer correctly after the first
	  answer.  The result was that no answers after the first
	  were being returned.  For results where multiple records should
	  have been sorted by priority, weight, etc., there was nothing
	  to sort so the only the first record was returned even if it
	  wouldn't have been the correct record based on the sort.

	  ASTERISK-25565 #close
	  Reported-by: Daniel Tryba
	  Tested-by George Joseph

	  Change-Id: I8622604fefdcd3c11e2c5609a6382e53b1467b0b

2015-11-13 14:03 +0000 [ed13732188]  Mark Michelson <mmichelson@digium.com>

	* Confbridge: Add a user timeout option

	  This option adds the ability to specify a timeout, in seconds, for a
	  participant in a ConfBridge. When the user's timeout has been reached,
	  the user is ejected from the conference with the CONFBRIDGE_RESULT
	  channel variable set to "TIMEOUT".

	  The rationale for this change is that there have been times where we
	  have seen channels get "stuck" in ConfBridge because a network issue
	  results in a SIP BYE not being received by Asterisk. While these
	  channels can be hung up manually via CLI/AMI/ARI, adding some sort of
	  automatic cleanup of the channels is a nice feature to have.

	  ASTERISK-25549 #close
	  Reported by Mark Michelson

	  Change-Id: I2996b6c5e16a3dda27595f8352abad0bda9c2d98

2015-11-16 13:56 +0000 [a83e426e91]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip: Fix off nominal crash with requests that fail and have a timer

	  When a request is sent using pjsip_endpt_send_request and fails, a condition
	  exists where the request wrapper, which is an AO2 object, may be de-ref'd
	  more times than it should. This occurs when the request's callback is called,
	  and, in the callback, the timer on the PJSIP heap is cancelled. When that
	  occurs, the request wrapper's lifetime is decremented. When
	  pjsip_endpt_send_request fails, we unilaterally decrement the lifetime of
	  the request wrapper again, even though we've already cancelled the reference
	  associated with the timer.

	  This patch checks the return result of pj_timer_heap_cancel_if_active before
	  removing the reference associated with the timer. We now only decrement it
	  in this case if a timer is cancelled as a result of the function call.

	  Change-Id: I21332343a1a019c1117076f9bf2df27be2850102

2015-11-14 07:02 +0000 [a1fcf6f7b2]  Joshua Colp <jcolp@digium.com>

	* hashtab: Add NULL check when destroying iterator.

	  The hashtab API is pretty NULL tolerant which has resulted
	  in remaining callers not doing much checks themselves.
	  Unfortunately the function to destroy an iterator does not
	  do a NULL check and will result in a crash if passed NULL.
	  This change fixes that.

	  ASTERISK-25552 #close

	  Change-Id: Ic1bf8eec3639e5a440f1c941d3ae3893ac6ed619

2015-11-13 14:32 +0000 [436023a322]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_rfc3326.c: Fix crash when channel goes away.

	  If an authenticated incoming caller does not respond to our 200 OK INVITE
	  response with an ACK then PJSIP will hangup the call.  Unfortunately,
	  there is a chance that the session's channel will go away between one use
	  of the channel pointer and another when building the BYE request because
	  the BYE is being built by the monitor thread and not the call's serializer
	  thread.

	  * Added a check to ensure that the thread trying to add the Reason header
	  is the call's serializer thread.  This ensures that the channel will not
	  go away on us.

	  Change-Id: I866388d2b97ea2032eaae3f3ab3f1ca6cbd2df89

2015-11-13 14:19 +0000 [e8881e1770]  Mark Michelson <mmichelson@digium.com>

	* Taskprocessors: Increase high-water mark

	  In practical tests, we have seen certain taskprocessors, specifically
	  Stasis subscription taskprocessors, cross the recently-added high-water
	  mark and emit a warning. This high-water mark warning is only intended
	  to be emitted when things have tanked on the system and things are
	  heading south quickly. In the practical tests, the Stasis taskprocessors
	  sometimes had a max depth of 180 tasks in them, and Asterisk wasn't in
	  any danger at all.

	  As such, this ups the high-water mark to 500 tasks instead. It also
	  redefines the SIP threadpool request denial number to be a multiple of
	  the taskprocessor high-water mark.

	  Change-Id: Ic8d3e9497452fecd768ac427bb6f58aa616eebce

2015-11-11 07:00 +0000 [fd23d423d8]  Alexander Traud <pabstraud@compuserve.com>

	* format: Register format-attribute module with cached formats.

	  In Asterisk 13, cached formats are created before their corresponding format-
	  attribute module is registered. Cached formats are involved when a local
	  extension is called. Therefore, ast_format_generate_sdp_fmtp did not work
	  on local extensions. This change affects the Opus Codec, H.263 (Plus), H.264,
	  and format-attribute modules provided externally.

	  ASTERISK-25160 #close

	  Change-Id: I1ea1f0483e5261e2a050112e4ebdfc22057d1354

2015-11-12 11:17 +0000 [40b58a5d2b]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip distributor: Don't send 503 response to responses.

	  When the SIP threadpool is backed up with tasks, we send 503 responses
	  to ensure that we don't try to overload ourselves. The problem is that
	  we were not insuring that we were not trying to send a 503 to an
	  incoming SIP response.

	  This change makes it so that we only send the 503 on incoming requests.

	  Change-Id: Ie2b418d89c0e453cc6c2b5c7d543651c981e1404

2015-11-11 17:11 +0000 [264c74aa22]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Deny requests when threadpool queue is backed up.

	  We have observed situations where the SIP threadpool may become
	  deadlocked. However, because incoming traffic is still arriving, the SIP
	  threadpool's queue can continue to grow, eventually running the system
	  out of memory.

	  This change makes it so that incoming traffic gets rejected with a 503
	  response if the queue is backed up too much.

	  Change-Id: I4e736d48a2ba79fd1f8056c0dcd330e38e6a3816

2015-11-12 06:24 +0000 [a159747660]  Joshua Colp <jcolp@digium.com>

	* format_cap: Don't append the 'none' format when appending all.

	  When appending all formats of a type all the codecs are iterated
	  and added. This operation was incorrectly adding the ast_format_none
	  format which is special in that it is supposed to be used when no
	  format is present. It shouldn't be appended.

	  ASTERISK-25535

	  Change-Id: I7b00f3bdf4a5f3022e483d6ece602b1e8b12827c

2015-11-11 04:16 +0000 [d982b99e71]  Steve Davies <steve@one47.co.uk>

	* Further fixes to improper usage of scheduler

	  When ASTERISK-25449 was closed, a number of scheduler issues mentioned in
	  the comments were missed. These have since beed raised in ASTERISK-25476
	  and elsewhere.

	  This patch attempts to collect all of the scheduler issues discovered so
	  far and address them sensibly.

	  ASTERISK-25476 #close

	  Change-Id: I87a77d581e2e0d91d33b4b2fbff80f64a566d05b

2015-11-11 11:04 +0000 [2954354404]  Joshua Colp <jcolp@digium.com>

	* threadpool: Handle worker thread transitioning to dead when going active.

	  This change adds handling of dead worker threads when moving them
	  to be active. When this happens the worker thread is removed from
	  both the active and idle threads container. If no threads are able
	  to be moved to active then the pool grows as configured.

	  A unit test has also been added which thrashes the idle timeout
	  and thread activation to exploit any race conditions between the
	  two.

	  ASTERISK-25546 #close

	  Change-Id: I6c455f9a40de60d9e86458d447b548fb52ba1143

2015-11-10 09:24 +0000 [525c7ab780]  Alexander Traud <pabstraud@compuserve.com>

	* rtp_engine: Init a format-attribute module to its RFC defaults.

	  Previously, format-attribute modules relied on an existing fmtp line in SDP
	  negotiation. However, fmtp is optional for several formats like the Opus Codec.
	  Now, the format-attribute module is called with an empty fmtp, which allows the
	  module to initialise itself to RFC defaults. Furthermore now, Asterisk is able
	  to differentiate between internally and externally created formats.

	  ASTERISK-25537 #close

	  Change-Id: I28f680cef7fdf51c0969ff8da71548edad72ec52

2015-11-09 18:19 +0000 [be93036a4e]  Corey Farrell <git@cfware.com>

	* Remove ABI compatibility stub functions.

	  ABI compatibility stubs existed for ast_app_separate_args and ast_verbose,
	  this is not needed in master.

	  Change-Id: I07b4d2c16079da3c2c6efa55df4a74368e0bd453

2015-11-10 07:51 +0000 [02a124eda5]  Corey Farrell <git@cfware.com>

	* Remove execute permission from dns_system_resolver.c

	  Change-Id: I3185735db42064bab00d3e073aed703385a00bf4

2015-11-09 03:01 +0000 [cf79b62778]  Alexander Traud <pabstraud@compuserve.com>

	* ast_format_cap_get_names: To display all formats, the buffer was increased.

	  ASTERISK-25533 #close

	  Change-Id: Ie1a9d1a6511b3f1a56b93d04475fbf8a4e40010a

2015-11-09 07:04 +0000 [e85f0c81af]  Alexander Traud <pabstraud@compuserve.com>

	* ast_format_cap: Avoid format creation on module load, use cache instead.

	  Since Asterisk 13, formats are immutable and cached. However while loading a
	  module like chan_sip, some formats were created instead using cached ones.

	  ASTERISK-25535 #close

	  Change-Id: I479cdc220d5617c840a98f3389b3bd91e91fbd9b

2015-11-06 07:54 +0000 [7dd8f89a50]  Walter Doekes <walter+asterisk@wjd.nu>

	* func_callerid: Document that CALLERID(pres) is available.

	  CALLERPRES() says that it's deprecated in favor of CALLERID(num-pres)
	  and CALLERID(name-pres).  But for channel driver that don't make a
	  distinction between the two (e.g. SIP), it makes more sense to get/set
	  both at once.  This change reveals the availability of CALLERID(pres),
	  CONNECTEDLINE(pres), REDIRECTING(orig-pres), REDIRECTING(to-pres) and
	  REDIRECTING(from-pres).

	  ASTERISK-25373 #close

	  Change-Id: I5614ae4ab7d3bbe9c791c1adf147e10de8698d7a
2015-11-06 07:52 +0000 [39daf9f066]  Walter Doekes <walter+asterisk@wjd.nu>

	* docs: Fix a few typo's in app docs (more then, resourse).

	  Change-Id: Iba57efadf6c0b822e762c7a001bc89611d98afd7

2015-11-06 14:19 +0000 [d82a4b098f]  gtjoseph <george.joseph@fairview5.com>

	* dns: Use ntohl for ans->ttl in dns_parse_answer_ex

	  dns_parse_answer_ex was not converting ans->ttl from network
	  by order to host byte order which was causing certain ttls
	  it to go negative. In turn this was causing answer edit checks
	  to fail.

	  ASTERISK-25528 #close
	  Reported-by: Daniel Tryba
	  Tested-by: George Joseph

	  Change-Id: I31505132d6321c46d2f39fd06c20ee808a864037

2015-11-06 07:36 +0000 [74e7333317]  Walter Doekes <walter+asterisk@wjd.nu>

	* xmldoc: Improve xmldoc wrapping of 'core show ...' output.

	  Previously, the wrapping did both lookahead and lookback, which,
	  together with color escape sequences, caused some lines to be wrapped
	  way earlier than other lines.  This led to inconsistent output.

	  This simplifies the wrapping code and makes it more sane: if maxcolumns
	  is hit, we simply jump back to the last space and wrap there.

	  ASTERISK-25527 #close

	  Change-Id: I56d01c6f9a812642b1b05535c98d4db48d17c957

2015-11-06 06:57 +0000 [9d6e917349]  Sean Bright (license #5060)

	* res_pjsip_sdp_rtp: Enable Opus to be negotiated via SIP/SDP.

	  In SIP/SDP, Opus has two channels always (see RFC 7587 section 7). The actual
	  amount of channels is negotiated in-band. Therefore now, the Opus codec and its
	  attribute rtpmap are registered with two channels.

	  ASTERISK-24779 #close
	  Reported by: PowerPBX
	  Tested by: Alexander Traud
	  patches:
	    asterisk-24779.patch submitted by Sean Bright (license #5060)

	  Change-Id: Ic7ac13cafa1d3450b4fa4987350924b42cbb657b

2015-11-03 16:19 +0000 [a2c2a8e1bb]  Jonathan Rose <jrose@digium.com>

	* taskprocessor: Add high water mark warnings

	  If a taskprocessor's queue grows large, this can indicate that there
	  may be a problem with tasks not leaving the processor or else that
	  the number of available task processors for a given type of task is
	  too low. This patch makes it so that if a taskprocessor's task queue
	  grows above 100 queued tasks that it will emit a warning message.
	  Warning messages are emitted only once per task processor.

	  ASTERISK-25518 #close
	  Reported by: Jonathan Rose

	  Change-Id: Ib1607c35d18c1d6a0575b3f0e3ff5d932fd6600c

2015-11-02 20:11 +0000 [cd5ae02812]  Corey Farrell <git@cfware.com>

	* Increase account code maximum length to 80.

	  This increases the maximum length of account code's to match
	  extensions.  This ensures it is always possible to set an
	  accountcode to ${EXTEN} without truncation.

	  ASTERISK-23904
	  Reported by: Ben Merrills

	  Change-Id: If122602304ce03362722eb213a3111b32da5eeb9

2015-11-03 14:36 +0000 [379c041038]  Tyler Cambron <tcambron@digium.com>

	* StatsD: Add res_statsd compatibility

	  Added a new api to res_statsd.c to allow it to receive a
	  character pointer for the value argument. This allows for a
	  '+' and a '-' to easily be sent with the value.

	  ASTERISK-25419
	  Reported By: Ashley Sanders

	  Change-Id: Id6bb53600943d27347d2bcae26c0bd5643567611

2015-11-04 14:31 +0000 [9c293b5104]  Matt Jordan <mjordan@digium.com>

	* main/dial: Protect access to the format_cap structure of the requesting channel

	  When a dial attempt is made that involves a requesting channel, we previously
	  were not:
	  a) Protecting access to the native format capabilities structure on the
	     requesting channel. That is inherently unsafe.
	  b) Reference bumping the lifetime of the format capabilities structure.

	  In both cases, something else could sneak in, blow away the format
	  capabilities, and we'd be holding onto an invalid format_cap structure. When
	  the newly created channel attempts to construct its format capabilities, things
	  go poorly.

	  This patch:
	  a) Ensures that we get a reference to the native format capabilities while
	     the requesting channel is locked
	  b) Holds a reference to the native format capabilities during the creation
	     of the new channel.

	  ASTERISK-25522 #close

	  Change-Id: I0bfb7ba8b9711f4158cbeaae96edf9626e88a54f

2015-10-30 22:57 +0000 [b0bf189908]  Corey Farrell <git@cfware.com>

	* Fix cli display of build options.

	  A previous commit reduced the AST_BUILDOPTS compiler define to
	  only include options that affected ABI.  This included some options
	  that were previously displayed by cli "core show settings".  This
	  change corrects the CLI display while still restricting buildopts.h
	  to ABI effecting options only.

	  ASTERISK-25434 #close
	  Reported by: Rusty Newton

	  Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325

2015-11-03 10:58 +0000 [63e02b45c6]  Matt Jordan <mjordan@digium.com>

	* pjsip_configuration: On delete, remove the persistent version of an endpoint

	  When an endpoint is deleted (such as through an API), the persistent endpoint
	  currently continues to lurk around. While this isn't harmful from a memory
	  consumption perspective - as all persistent endpoints are reclaimed on
	  shutdown - it does cause Stasis endpoint related operations to continue
	  to believe that the endpoint may or may not exist.

	  This patch causes the persistent endpoint related to a PJSIP endpoint to be
	  destroyed if the PJSIP endpoint is deleted.

	  Change-Id: I85ac707b4d5e6aad882ac275b0c2e2154affa5bb
2015-11-03 11:15 +0000 [d33a1682e3]  Matt Jordan <mjordan@digium.com>

	* res_pjsip/location: Destroy contact_status objects on contact deletion

	  The contact_status Sorcery objects are currently not destroyed when a contact
	  is deleted. This causes the contact's last known RTT/status to be 'sticky'
	  when the contact itself may no longer exist. This patch causes the
	  contact_status objects associated with both dynamic and static contacts to
	  be destroyed if the AoR holding those contacts is also destroyed (or via
	  other paths where a contact may be deleted.)

	  Change-Id: I7feec8b9278cac3c5263a4c0483f4a0f3b62426e

2015-11-03 08:15 +0000 [e26a06c1da]  Matt Jordan <mjordan@digium.com>

	* main/stasis_endpoints: Fix ContactStatusChange JSON for roundtrip_usec field

	  The JSON packing for the ContactStatusChange event forgot to include the
	  roundtrip_usec field. As a result, the field never showed up in any event,
	  even when the data was available. This patch corrects that error by properly
	  packing the JSON blob with the data.

	  Change-Id: I8df80da659a44010afbd48f645967518ff5daa17

2015-11-02 20:24 +0000 [40574a2ea3]  Corey Farrell <git@cfware.com>

	* chan_sip: Allow websockets to be disabled.

	  This patch adds a new setting "websockets_enabled" to sip.conf.
	  Setting this to false allows chan_sip to be used without causing
	  conflicts with res_pjsip_transport_websocket.

	  ASTERISK-24106 #close
	  Reported by: Andrew Nagy

	  Change-Id: I04fe8c4f2d57b2d7375e0e25826c91a72e93bea7

2015-11-02 17:19 +0000 [f80a0ae49b]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Set threadpool max size default to 50.

	  During a stress test of subscriptions, a huge blast of
	  subscription-related traffic resulted in the threadpool expanding to a
	  ridiculous number of threads. The balooning of threads resulted in an
	  increase of memory, which led to a crash due to being out of memory.

	  An easy fix for the particular test was to limit the size of the
	  threadpool, thus reining in the amount of memory that would be used. It
	  was decided that there really is no downside to having a non-infinite
	  default value for the maximum size of the threadpool, so this change
	  introduces 50 threads as the maximum threadpool size for the SIP
	  threadpool.

	  ASTERISK-25513 #close
	  Reported by John Bigelow

	  Change-Id: If0b9514f1d9b172540ce1a6e2f2ffa1f2b6119be

2015-10-29 15:25 +0000 [c5093b21ad]  Tyler Cambron <tcambron@digium.com>

	* StatsD: Send stuff to the StatsD server and test

	  Added code to allow the StatsD dialplan application to
	  send data to the server specified in statsd.conf.

	  ASTERISK-25419

	  Change-Id: I400db2f37c6ddf61515ff5a019646e36dcd0f922

2015-11-02 06:57 +0000 [014e3d426b]  Matt Jordan <mjordan@digium.com>

	* pjsip_options: Schedule/unschedule qualifies on AoR creation/destruction

	  When an AoR is created or destroyed dynamically, the scheduled OPTIONS
	  requests that qualify the contacts on the AoR are not necessarily started
	  or destroyed, particularly for persistent contacts created for that AoR.
	  This patch adds create/update/delete sorcery observers for an AoR, which
	  schedule/unschedule the qualifies as expected.

	  Change-Id: Ic287ed2e2952a7808ee068776fe966f9554bdf7d

2015-10-30 13:22 +0000 [80cf4960ff]  Matt Jordan <mjordan@digium.com>

	* Makefile: Add a rule 'basic-pbx' that installs the Basic PBX configs

	  This patch adds a rule for installing the Super Awesome Company based 'Basic
	  PBX' configuration files. As part of adding this rule, a bit of the content
	  that makes up installing the configuration files under the 'samples' target
	  was refactored into a make subroutine for usage by additional later config
	  make targets.

	  Change-Id: I6c2e27906f73e2919a2b691da0be20ae70302404
2015-10-29 08:28 +0000 [b522a5e30f]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: Fix assertion when UAS dialog creation fails.

	  When compiled with assertions enabled one will occur when destroying
	  the subscription tree when UAS dialog creation fails. This is because
	  the code assumes that a dialog will always exist on a subscription
	  tree when in reality during this specific scenario it won't.

	  This change makes it so a dialog is not removed from the subscription
	  tree if it is not present.

	  ASTERISK-25505 #close

	  Change-Id: Id5c182b055aacc5e66c80546c64804ce19218dee

2015-10-08 11:50 +0000 [fdfd0fb488]  Tyler Cambron <tcambron@digium.com>

	* StatsD: Add user input validation to the application

	  Added code to accept user input and validate it before
	  allowing it to be sent to the StatsD server.

	  ASTERISK-25419
	  Reported By: Ashley Sanders

	  Change-Id: I55c7ce44326a68ad6c5c1514b9575ac50f25bbc3

2015-10-26 11:42 +0000 [d343a25173]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Do not send all codecs on INVITE.

	  Since version 13, Asterisk sent all allowed codecs as callee, even when the
	  caller did not request/support them. In case of dynamic RTP payloads, this led
	  to the same ID for different codecs, which is not allowed by SIP/SDP. Now, the
	  intersection between the requested and the supported codecs is send again.

	  ASTERISK-24543 #close

	  Change-Id: Ie90cb8bf893b0895f8d505e77343de3ba152a287

2015-10-19 07:11 +0000 [88f3dbaec9]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* install_prereq: Update repositories before install on Debian systems

	  When to install packages the indexed local is more old of the
	  version of software on the repository they have been upgraded by security
	  update then get the package will give 404 not found.

	  The patch prevent by update local index to repository for aptitude before
	  install.

	  ASTERISK-25495 #close

	  Reporte by: Rodrigo Ramírez Norambuena

	  Change-Id: I645959e553aac542805ced394cac2dca964051fa

2015-10-24 13:08 +0000 [4328d320c2]  gtjoseph <george.joseph@fairview5.com>

	* build: GCC 5.1.x catches some new const, array bounds and missing paren issues

	  Fixed 1 issue in each of the affected files.

	  ASTERISK-25494 #close
	  Reported-by: George Joseph
	  Tested-by: George Joseph

	  Change-Id: I818f149cd66a93b062df421e1c73c7942f5a4a77

2015-10-20 16:02 +0000 [a8aee0bbdb]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Add "like" processing to pjsip list and show commands

	  Add the ability to filter output from pjsip list and show commands
	  using the "like" predicate like chan_sip.

	  For endpoints, aors, auths, registrations, identifyies and transports,
	  the modification was a simple change of an ast_sorcery_retrieve_by_fields
	  call to ast_sorcery_retrieve_by_regex.  For channels and contacts a
	  little more work had to be done because neither of those objects are
	  true sorcery objects.  That was just removing the non-matching object
	  from the final container.  Of course, a little extra plumbing in the
	  common pjsip_cli code was needed to parse the "like" and pass the regex
	  to the get_container callbacks.

	  Some of the get_container code in res_pjsip_endpoint_identifier was also
	  refactored for simplicity.

	  ASTERISK-25477 #close
	  Reported by: Bryant Zimmerman
	  Tested by: George Joseph

	  Change-Id: I646d9326b778aac26bb3e2bcd7fa1346d24434f1

2015-10-21 12:22 +0000 [691c0e0b31]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_registration: registration stops due to fatal 4xx response

	  During outbound registration it is possible to receive a fatal (any permanent/
	  non-temporary 4xx, 5xx, 6xx) response from the registrar that is simply due
	  to a problem with the registrar itself. Upon receiving the failure response
	  Asterisk terminates outbound registration for the given endpoint.

	  This patch adds an option, 'fatal_retry_interval', that when set continues
	  outbound registration at the given interval up to 'max_retries' upon receiving
	  a fatal response.

	  ASTERISK-25485 #close

	  Change-Id: Ibc2c7b47164ac89cc803433c0bbe7063bfa143a2

2015-10-22 17:07 +0000 [5dd9e1938a]  Mark Michelson <mmichelson@digium.com>

	* format_cap: Detect vector allocation failures.

	  A crash was seen on a system that ran out of memory due to Asterisk not
	  checking for vector allocation failures in format_cap.c. With this
	  change, if either of the AST_VECTOR_INIT calls fail, we will return a
	  value indicating failure.

	  Change-Id: Ieb9c59f39dfde6d11797a92b45e0cf8ac5722bc8

2015-10-02 15:32 +0000 [7f9823ff57]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Prevent sending NOTIFY on destroyed dialog.

	  A certain situation can result in our attempting to send a NOTIFY on a
	  destroyed dialog. Say we attempt to send a NOTIFY to a subscriber, but
	  that subscriber has dropped off the network. We end up retransmitting
	  that NOTIFY until the appropriate SIP timer says to destroy the NOTIFY
	  transaction. When the pjsip evsub code is told that the transaction has
	  been terminated, it responds in kind by alerting us that the
	  subscription has been terminated, destroying the subscription, and then
	  removing its reference to the dialog, thus destroying the dialog.

	  The problem is that when we get told that the subscription is being
	  terminated, we detect that we have not sent a terminating NOTIFY
	  request, so we queue up such a NOTIFY to be sent out. By the time that
	  queued NOTIFY gets sent, the dialog has been destroyed, so attempting to
	  send that NOTIFY can result in a crash.

	  The fix being introduced here is actually a reintroduction of something
	  the pubsub code used to employ. We hold a reference to the dialog and
	  wait to decrement our reference to the dialog until our subscription
	  tree object is destroyed. This way, we can send messages on the dialog
	  even if the PJSIP evsub code wants to terminate earlier than we would
	  like.

	  In doing this, some NULL checks for subscription tree dialogs have been
	  removed since NULL dialogs are no longer actually possible.

	  Change-Id: I013f43cddd9408bb2a31b77f5db87a7972bfe1e5

2015-09-29 14:53 +0000 [e9e4bc9ece]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Ensure dialog lock balance.

	  When sending a NOTIFY, we lock the dialog and then unlock the dialog
	  when finished. A recent change made it so that the subscription tree's
	  dialog pointer will be set NULL when sending the final NOTIFY request
	  out. This means that when we attempt to unlock the dialog, we pass a
	  NULL pointer to pjsip_dlg_dec_lock(). The result is that the dialog
	  remains locked after we think we have unlocked it. When a response to
	  the NOTIFY arrives, the monitor thread attempts to lock the dialog, but
	  it cannot because we never released the dialog lock. This results in
	  Asterisk being unable to process incoming SIP traffic any longer.

	  The fix in this patch is to use a local pointer to save off the pointer
	  value of the subscription tree's dialog when locking and unlocking the
	  dialog. This way, if the subscription tree's dialog pointer is NULLed
	  out, the local pointer will still have point to the proper place and the
	  dialog lock will be unlocked as we expect.

	  Change-Id: I7ddb3eaed7276cceb9a65daca701c3d5e728e63a

2015-09-28 16:36 +0000 [b96267f7a3]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Prevent crashes on final NOTIFY.

	  The SIP dialog is removed from the subscription tree when the final
	  NOTIFY is sent. However, after the final NOTIFY is sent, the persistence
	  update function still attempts to access the cseq from the dialog,
	  resulting in a crash.

	  This fix removes the subscription persistence at the same time that the
	  dialog is removed from the subscription tree. This way, there is no
	  attempt to update persistence when the subscription is being destroyed.

	  Change-Id: Ibb46977a6cef9c51dc95f40f43446e3d11eed5bb

2015-09-17 17:28 +0000 [386cd7b2b0]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Remove serializer when sending final NOTIFY.

	  There have been crashes seen where a taskprocessor's listener is NULL
	  unexpectedly.

	  Looking at backtraces, the problem was specifically seen in PJSIP
	  serializers.

	  Subscriptions make the mistake of removing a serializer from a dialog
	  during subscription tree destruction. Since subscription trees are
	  reference-counted, guaranteeing the circumstances behind the destruction
	  are not possible. This makes it so that the dialog serializer can be
	  removed while not holding the dialog lock. This makes it possible for
	  the distributor to get a pointer to the dialog serializer and have that
	  serializer get freed out from under it.

	  The fix for this is to remove the serializer from a subscription dialog
	  when sending the final NOTIFY. This guarantees that the serializer is
	  removed with the dialog lock held. By doing this, we guarantee that if
	  the distributor gains access to the dialog's serializer, it will not be
	  possible for the serializer to get freed by another thread.

	  Change-Id: I21f5dac33529f65cec45679bdace60670800ff66

2015-09-02 09:14 +0000 [0b63d011c9]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Fix crash on destruction of empty subscription tree.

	  If an old persistent subscription is recreated but then immediately
	  destroyed because it is out of date, the subscription tree will have no
	  leaf subscriptions on it. This was resulting in a crash when attempting
	  to destroy the subscription tree.

	  A simple NULL check fixes this problem.

	  Change-Id: I85570b9e2bcc7260a3fe0ad85904b2a9bf36d2ac

2015-09-01 15:47 +0000 [ac0194dad6]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Solidify lifetime and ownership of objects.

	  There have been crashes and general instability seen in the pubsub code,
	  so this patch introduces three changes to increase the stability.

	  First, the ownership model for subscriptions has been modified. Due to
	  RLS, subscriptions are stored in memory as a tree structure. Prior to my
	  patch, the PJSIP subscription was the owner of the subscription tree.
	  When the PJSIP subscription told us that it was terminating, we started
	  destroying the subscription tree along with all of the individual leaf
	  subscriptions that belong to the tree. The problem with this model is
	  that the two actors in play here, the PJSIP subscription and the
	  individual leaf subscriptions, need to have joint ownership of the
	  subscription tree. So now, the PJSIP subscription and the individual
	  leaf subscriptions each have a reference to the subscription tree. This
	  way, we will not actually free memory until no players are left that
	  care. The PJSIP subscription is a bigger stakeholder, in that if the
	  PJSIP subscription's reference to the subscription tree is removed, the
	  subscription tree instructs the leaf subscriptions to shut down and drop
	  their references to the subscription tree when possible. The individual
	  leaf subscriptions, upon being told to shut down, can drop their stasis
	  subscriptions or whatever they use to learn of new state, and then drop
	  their reference to the subscription tree once they are ready to die.

	  Second, the lifetime of a PJSIP subscription's reference to our
	  subscription tree has been altered. As I learned from doing a deep dive,
	  the PJSIP evsub code can tell Asterisk multiple times that the
	  subscription has been terminated, and not all of these times
	  are especially helpful. I have altered the message flow that we use for
	  SIP subscriptions such that we will always drop the PJSIP subscription's
	  reference to the subscription tree when we send the NOTIFY that
	  terminates a SIP subscription. This also means that we will now queue
	  NOTIFY requests to be sent after responding to incoming SUBSCRIBEs so
	  that we can have predictable state changes from the PJSIP evsub code.

	  Third, the synchronization of operations has been improved. PJSIP can
	  call into our code from a serializer thread (e.g. upon receiving an
	  incoming request) or from the monitor thread (e.g. when a subscription
	  times out). Because of this, there is the possibility of competing
	  threads stepping on each other. PJSIP attempts to do some
	  synchronization on its own by always keeping the dialog lock held when
	  it calls into us. However, since we end up pushing tasks into the
	  serializer, the result was that serialized operations were not grabbing
	  the dialog lock and could, as a result, step on something that was being
	  attempted by a different thread. Now we ensure that serialized
	  operations grab the dialog lock, then check for extenuating
	  circumstances, then proceed with their operation if they can.

	  Change-Id: Iff2990c40178dad9cc5f6a5c7f76932ec644b2e5

2015-10-19 15:28 +0000 [1ce62b2545]  Richard Mudgett <rmudgett@digium.com>

	* strings.c: Fix __ast_str_helper() to always return a terminated string.

	  Users of functions which call __ast_str_helper() such as the ones listed
	  below are likely to not check the return value for failure so ensuring
	  that the string is always nil terminated is a good safety measure.

	  ast_str_set_va()
	  ast_str_append_va()
	  ast_str_set()
	  ast_str_append()

	  Change-Id: I36ab2d14bb6015868b49329dda8639d70fbcae07

2015-10-19 15:27 +0000 [a04d946eaa]  Richard Mudgett <rmudgett@digium.com>

	* Add missing failure checks to ast_str_set_va() callers.

	  Change-Id: I0c2cdcd53727bdc6634095c61294807255bd278f

2015-10-21 11:44 +0000 [64c172deba]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Move URI validation to use time.

	  In a realtime based system with a limited number of threadpool threads
	  it is possible for a deadlock to occur. This happens when permanent
	  endpoint state is updated, which will cause database queries to be done.
	  These queries may result in URI validation being done which is done
	  synchronously using a PJSIP thread. If all PJSIP threads are in use
	  processing traffic they themselves may be blocked waiting to get the
	  permanent endpoint container lock when identifying an endpoint.

	  This change moves URI validation to occur at use time instead of
	  configuration time. While this comes at a cost of not seeing a problem
	  until you use it it does solve the underlying deadlock problem.

	  ASTERISK-25486 #close

	  Change-Id: I2d7d167af987d23b3e8199e4a68f3359eba4c76a

2015-10-21 08:08 +0000 [f9cbac7321]  Alexander Traud <pabstraud@compuserve.com>

	* format: Update the maximum packetization time for iLBC 30.

	  In September 2006, the maximum packetization time (ptime) were set to such a
	  low value, packetization was disabled for many codecs actually. This was fixed
	  for many codecs but not for iLBC 30. This enables packetization for iLBC which
	  can be enabled for example via allow=ilbc:60,gsm,alaw,ulaw in the file sip.conf.

	  ASTERISK-7803

	  Change-Id: I2ef90023d35efb7cb8fe96ed74f53f6846ffad12
2015-10-21 09:51 +0000 [f3b2b3d1b3]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Fix autoframing=yes.

	  With Asterisk 13, the structures ast_format and ast_codec changed. Because of
	  that, the paketization timing (framing) of the RTP channel moved away from the
	  formats/codecs. In the course of that change, the ptime of the callee was not
	  honored anymore, when the optional autoframing was enabled.

	  ASTERISK-25484 #close

	  Change-Id: Ic600ccaa125e705922f89c72212c698215d239b4

2015-10-20 22:24 +0000 [b425850f8b]  Matt Jordan <mjordan@digium.com>

	* rest-api-templates: Wikify error code response reasons

	  Error response code descriptions may contain wiki markup that need to be
	  escaped. Without this patch, Confluence will reject the document being sent
	  and the responsible script will raise an exception.

	  Change-Id: I21fcb66fee7f6332381f2b99b1b0195dff215ee5

2015-10-20 12:06 +0000 [7be6194d6f]  Matt Jordan <mjordan@digium.com>

	* funcs/func_holdintercept: Actually add the HOLD_INTERCEPT function

	  When ab803ec342 was committed, it accidentally forgot to actually *add* the
	  HOLD_INTERCEPT function. This highlights two interesting points:
	  * Gerrit forces you to put the patch as it is going to into the repo up for
	    review, which Review Board did not. Yay Gerrit.
	  * No one apparently bothered to use this feature, or else they don't know about
	    it. I'm going to go with the latter explanation.

	  ASTERISK-24922

	  Change-Id: Ida38278f259dd07c334a36f9b7d5475b5db72396

2015-10-19 14:14 +0000 [77780790e0]  Jonh Wendell <jonh.wendell@gmail.com>

	* main/cdr: Allow modules to modify CDR fields before dispatching them

	  This patch adds the functions

	  	ast_cdr_modifier_register()
	  	ast_cdr_modifier_unregister()

	  That work much like ast_cdr_register() and ast_cdr_unregister().

	  Modules registered will be given a chance to modify (or to do whatever
	  they want) CDR fields just before they are passed to registered engines.

	  Thus, for instance, if a module change the "userfield" field of a CDR,
	  the modified value will be passed to every registered CDR backend for
	  logging.

	  ASTERISK-25479 #close

	  Change-Id: If11d8fd19ef89b1a66ecacf1201e10fcf86ccd56
2015-10-19 19:59 +0000 [b9bd249a85]  Matt Jordan <mjordan@digium.com>

	* contrib/scripts/autosupport: Update for Asterisk 13

	  This patch adds some minor tweaks for autosupport to update it for Asterisk 13.
	  This includes:
	  * Finally removing most references to Zaptel
	  * Adding support for some additional 'core' commands, and fixing nomenclature
	    that generally hasn't been used for some time
	  * Adding some PJSIP/SIP commands to gather endpoints/peers and active channels

	  Change-Id: Ic997b418cbd9313588b6608e50f47b0ce6f4f1f1
	  (cherry picked from commit 9fc9777fa34753fb38991d42d8dbed516e907ca2)

2015-10-18 18:22 +0000 [92fa8d1e0e]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* app_queue: Added reason pause of member

	  In app_queue added value Paused Reason on QueueMemberStatus when a member
	  on queue is paused and the reason was set.

	  ASTERISK-25480 #close
	  Reporte by: Rodrigo Ramírez Norambuena

	  Change-Id: Ia5db503482f50764c15e2020196c785f59d4a68e

2015-10-16 22:01 +0000 [b19860c03a]  Corey Farrell <git@cfware.com>

	* res_ari_events: Fix memory leak in mustache template.

	  ASTERISK-25308 fixed a memory leak in res_ari_events.c, but
	  this file is regenerated by a template and the template was
	  not fixed.

	  Change-Id: Ied4c6deae89d21f87f9cf99676b1d055aa83b38b

2015-10-14 14:15 +0000 [d799bcf361]  mdu113 <mulitskiy@acedsl.com>

	* res_config_pgsql.c: Fix deadlock loading realtime configuration.

	  On v13, loading several thousand PJSIP endpoints on Asterisk start causes
	  a deadlock most of the time.

	  Thanks to mdu113 for discovering that there was a call to pgsql_exec() not
	  protected by the pgsql_lock reentrancy lock.

	  {quote}
	  I believe a code path exists that attempts to use pgsql connection without
	  locking pgsql_lock.  I believe what happens during that deadlock that I
	  see is two concurrent threads are both attempting to send query to pgsql,
	  one of the thread is using a code path without locking pgsql_lock.  If
	  they managed to send queries at the same time, it seems postgres ignores
	  one of the queries and replies only to the one of them.  If it happens so
	  that the thread holding the lock didn't receive the reply it will wait for
	  it (and hold the lock) forever (or at least for very long time), thus
	  completely blocking all access to db.
	  {quote}

	  * Added missing reentrancy locking around pgsql_exec() in find_table().

	  * Moved unlock of pgsql_lock in unload_module() to avoid locking inversion
	  between the psql_tables list lock and the pgsql_lock.

	  ASTERISK-25455 #close
	  Reported by:  mdu113
	  Patches:
	        res_config_pgsql.c-connlock2.diff (license #5543) patch uploaded by mdu113

	  Change-Id: Id9e7cdf8a3b65ff19964b0cf942ace567938c4e2

2015-10-13 14:13 +0000 [13229037d1]  Olle Johansson (License 5267)

	* channels/chan_sip: Set cause code to 44 on RTP timeout

	  To quote Olle:

	  "When issuing a hangup due to RTP timeouts the cause code is not set. I have
	  selected 44 based on Cisco's implementation..."

	  ASTERISK-25135 #close
	  Reported by: Olle Johansson
	  patches:
	    rtp-timeout-cause-1.8.diff uploaded by Olle Johansson (License 5267)

	  Change-Id: Ia62100c55077d77901caee0bcae299f8dc7375fc

2015-10-12 11:21 +0000 [984f100dab]  Richard Mudgett <rmudgett@digium.com>

	* config.c: Fix off-nominal memory leak.

	  Change-Id: I06e346e9a5c63cc5071e7eda537310c4b43bffe0

2015-10-12 11:20 +0000 [9951255775]  Richard Mudgett <rmudgett@digium.com>

	* config.c: Fix potential memory corruption after [section](+).

	  The memory corruption could happen if the [section](+) is the last section
	  in the file with trailing comments.  In this case process_text_line() has
	  left *last_cat is set to newcat and newcat is destroyed.

	  Change-Id: I0d1d999f553986f591becd000e7cc6ddfb978d93

2015-10-12 11:21 +0000 [c1ed11ee31]  Richard Mudgett <rmudgett@digium.com>

	* config.c: Fix #include after [section](+).

	  An #include right after a [section](+) would associate any variable
	  assignments before a new section in the #include with the wrong section.

	  * Fix section association by setting the current section to the appended
	  section.

	  * Fix '+' and '!' section flag interaction corner case depending upon
	  which flag came first.  If the '!' came first then it would be ignored.
	  If the '!' came after then it would affect the appended section.  The '!'
	  will now no longer be ignored.

	  ASTERISK-25461 #close
	  Reported by: Sean Pimental

	  Change-Id: Ic9d3191c8758048e2cbce6432f854b32531731c3

2015-10-10 15:20 +0000 [a12eb89ea4]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* Build: Add menuselect options for using compiler sanitizers

	  This patch adds menuselect options for building Asterisk with
	  various sanitizers provided by gcc and clang.

	  When one of *SANITIZER flags is set in menuselect, the appropriate
	  option is added to CFLAGS ad LDFLAGS for the build.

	  Information on sanitizers in the project wiki:
	  https://github.com/google/sanitizers/wiki

	  GCC Manual:
	  https://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html

	  Clang Compiler User's Manual:
	  http://clang.llvm.org/docs/UsersManual.html#controlling-code-generation

	  ASTERISK-24718 #close
	  Reported by: Badalian Vyacheslav

	  Change-Id: Iafa51b792b7bcb20e848b99d16cf362d08590fa0

2015-10-08 16:43 +0000 [ca030845ff]  Richard Mudgett <rmudgett@digium.com>

	* configure: Fix check for libunbound to require v1.5.0 as minimum.

	  Versions of libunbound before v1.4.21 do not compile with Asterisk.
	  However, since v1.4.21 has a configure script bug that fails to detect the
	  ldns library (which is fixed in v1.4.22) and v1.4.22 is not an easily
	  detectable version we will require v1.5.0 as a minimum version of the
	  library to work with Asterisk.

	  ASTERISK-25108 #close
	  Reported by: Richard Mudgett

	  Change-Id: Ieb228bfb01467573fc121c7356a9dde27128894d

2015-10-08 11:50 +0000 [2fe9f09705]  Tyler Cambron <tcambron@digium.com>

	* StatsD: Write skeleton Asterisk application

	  Wrote the skeleton framework for the Asterisk StatsD dialplan
	  application. This includes a load function, unload function, a
	  callback for execution, and XML documentation.

	  ASTERISK-25419
	  Reported By: Ashley Sanders

	  Change-Id: I9597730e134c6e82c8a55ef4d5334b62dd473363

2015-10-06 18:01 +0000 [34d7fa6c4a]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix deadlock when sending out-of-dialog requests.

	  The struct send_request_wrapper has a pjsip lock associated with it that
	  is created non-recursive.  There is a code path for the struct
	  send_request_wrapper lock that will attempt to lock it recursively.  The
	  reporter's deadlock showed that the thread calling endpt_send_request()
	  deadlocked itself right after the wrapper object got created.

	  Out-of-dialog requests such as MESSAGE, qualify OPTIONS, and unsolicited
	  MWI NOTIFY messages can hit this deadlock.

	  * Replaced the struct send_request_wrapper pjsip lock with the mutex lock
	  that can come with an ao2 object since all of Asterisk's mutexes are
	  recursive.  Benefits include removal of code maintaining the pjsip
	  non-recursive lock since ao2 objects already know how to maintain their
	  own lock and the lock will show up in the CLI "core show locks" output.

	  ASTERISK-25435 #close
	  Reported by: Dmitriy Serov

	  Change-Id: I458e131dd1b9816f9e963f796c54136e9e84322d

2015-10-06 11:05 +0000 [cc131832aa]  Stefan Engström <stefanen@kth.se>

	* res/res_rtp_asterisk.c: Fix incorrect assignment of frame->subclass.frame_ending

	  In ast_rtp_read, the value of the variable 'mark' which we try to assign to a
	  frame->subclass.frame_ending may be 0, 1 or (1<<23), but we should translate
	  it to 0 or 1.

	  ASTERISK-25451 #close
	  Change-Id: I53bdf5c026041730184a6a809009c028549ce626

2015-10-07 01:24 +0000 [c944263e36]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* func_presencestate: Return "not_set" when no data is set in AstDB

	  Return AST_PRESENCE_NOT_SET when CustomPresence AstDB key does not
	  exist, i.e. when a new CustomPresence is added in the dialplan.

	  ASTERISK-25400 #close
	  Reported by: Andrew Nagy

	  Change-Id: I6fb17b16591b5a55fbffe96f3994ec26b1b1723a

2015-10-06 20:43 +0000 [4bf395e81e]  Matt Jordan <mjordan@digium.com>

	* res/res_rtp_asterisk: Fix assignment after ao2 decrement

	  When we decide we will no longer schedule an RTCP write, we remove the
	  reference to the RTP instance, then assign -1 to the stored scheduler ID
	  in case something else comes along and wants to see if anything is scheduled.

	  That scheduler ID is on the RTP instance. After 60a9172d7ef2 was merged to
	  fix the regression introduced by 3cf0f29310, this improper assignment on a
	  potentially destroyed object started getting tripped on the build agents.

	  Frankly, this should have been crashing a lot more often earlier. I can only
	  assume that the timing was changed just enough by both changes to start
	  actually hitting this problem.

	  As it is, simply moving the assignment prior to the ao2 deference is sufficient
	  to keep the RTP instance from being referenced when it is very, truly,
	  aboslutely dead.

	  (Note that it is still good practice to assign -1 to the scheduler ID when we
	  know we won't be scheduling it again, as the ao2 deref *may* not always destroy
	  the ao2 object.)

	  ASTERISK-25449

	  Change-Id: Ie6d3cb4adc7b1a6c078b1c38c19fc84cf787cda7

2015-10-06 12:40 +0000 [3ec9cf7d6a]  Florian Sauerteig <ffs@ccn.net>

	* chan_sip: Fix port parsing for IPv6 addresses in SIP Via headers.

	  If a Via header containes an IPv6 address and a port number is ommitted,
	  as it is the standard port, we now leave the port empty and to not set it
	  to the value after the first colon of the IPv6 address.

	  ASTERISK-25443 #close

	  Change-Id: Ie3c2f05471cd006bf04ed15598589c09577b1e70

2015-10-05 16:53 +0000 [8fe9350b68]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip: Fix crash on reINVITE before initial INVITE completes.

	  Apparently some endpoints attempt to send a reINVITE before completing the
	  initial INVITE transaction.  In this case PJSIP responds appropriately to
	  the reINVITE with a 491 INVITE request pending.  Unfortunately chan_pjsip
	  is using the initial INVITE transaction state to determine if an INVITE is
	  the initial INVITE or a reINVITE.  Since the initial INVITE transaction
	  has not been confirmed yet chan_pjsip thinks the reINVITE is an initial
	  INVITE and starts another PBX thread on the channel.  The extra PBX thread
	  ensures that hilarity ensues.

	  * Fix checks for a reINVITE on incoming requests to look for the presence
	  of a to-tag instead of the initial INVITE transaction state.

	  * Made caller_id_incoming_request() determine what to do if there is a
	  channel on the session or not.  After a channel is created it is too late
	  to just store the new party id on the session because the session's party
	  id has already been copied to the channel's caller id.

	  ASTERISK-25404 #close
	  Reported by: Chet Stevens

	  Change-Id: Ie78201c304a2b13226f3a4ce59908beecc2c68be

2015-10-05 21:34 +0000 [8cb614fe20]  Matt Jordan <mjordan@digium.com>

	* Fix improper usage of scheduler exposed by 5c713fdf18f

	  When 5c713fdf18f was merged, it allowed for scheduled items to have an ID of
	  '0' returned. While this was valid per the documentation for the API, it was
	  apparently never returned previously. As a result, several users of the
	  scheduler API viewed the result as being invalid, causing them to reschedule
	  already scheduled items or otherwise fail in interesting ways.

	  This patch corrects the users such that they view '0' as valid, and a returned
	  ID of -1 as being invalid.

	  Note that the failing HEP RTCP tests now pass with this patch. These tests
	  failed due to a duplicate scheduling of the RTCP transmissions.

	  ASTERISK-25449 #close

	  Change-Id: I019a9aa8b6997584f66876331675981ac9e07e39
2015-08-26 16:58 +0000 [c6b0d60264]  Debian Amtelco <dan@amtelco.com>

	* chan_pjsip: Add Referred-By header to the PJSIP REFER packet.

	  Some systems require the REFER packet to include a Referred-By header.
	  If the channel variable SIPREFERREDBYHDR is set, it passes that value as the
	  Referred-By header value.  Otherwise, it adds the current dialog’s local info.

	  Reported by: Dan Cropp
	  Tested by: Dan Cropp

	  Change-Id: I3d17912ce548667edf53cb549e88a25475eda245

2015-10-03 06:27 +0000 [89dec7675d]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* manager: Fix GetConfigJSON returning invalid JSON

	  When GetConfigJSON was introduced back in 1.6, it returned each
	  section as an array of strings: ["key=value", "key2=value2"].
	  Afterwards, it was changed a few times and became
	  ["key": "value", "key2": "value2"], which is not a correct JSON.
	  This patch fixes that by constructing a JSON object {} instead of
	  an array [].

	  Also, the keys "istemplate" and "tempates" that are used to
	  indicate templates and their inherited categories are now wrapped in
	  quotes.

	  ASTERISK-25391 #close
	  Reported by: Bojan Nemčić

	  Change-Id: Ibbe93c6a227dff14d4a54b0d152341857bcf6ad8

2015-09-30 17:28 +0000 [1b80dbeb60]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_memory_cache.c: Fix deadlock with scheduler.

	  A deadlock can happen when a sorcery object is being expired from the
	  memory cache when at the same time another object is being placed into the
	  memory cache.  There are a couple other variations on this theme that
	  could cause the deadlock.  Basically if an object is being expired from
	  the sorcery memory cache at the same time as another thread tries to
	  update the next object expiration timer the deadlock can happen.

	  * Add a deadlock avoidance loop in expire_objects_from_cache() to check if
	  someone is trying to remove the scheduler callback from the scheduler.

	  ASTERISK-25441 #close

	  Change-Id: Iec7b0bdb81a72b39477727b1535b2539ad0cf4dc

2015-10-01 14:30 +0000 [9c1ca287a4]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_memory_cache.c: Replace inline code with function.

	  Make sorcery_memory_cache_close() call remove_all_from_cache() instead of
	  partially inlining it.

	  ASTERISK-25441

	  Change-Id: I1aa6cb425b1a4307096f3f914d17af8ec179a74c

2015-10-01 14:27 +0000 [6554a3b25e]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_memory_cache.c: Shutdown in a less crash potential order.

	  Basically you should shutdown in the opposite order of how you setup since
	  later setup pieces likely depend on earlier setup pieces.  e.g.,
	  Registering your external API with the rest of the system should be the
	  last thing setup and the first thing unregistered during shutdown.

	  Change-Id: I5715765b723100c8d3c2642e9e72cc7ad5ad115e

2015-09-30 17:27 +0000 [359394cc29]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_memory_cache.c: Misc tweaks.

	  Change-Id: I8cd32dffbb4f33bb0c39518d6e4c991e73573160

2015-09-30 17:27 +0000 [7942d1c2ff]  Richard Mudgett <rmudgett@digium.com>

	* res_sorcery_memory_cache.c: Made use OBJ_SEARCH_MASK.

	  Change-Id: Ibca6574dc3c213b29cc93486e01ccd51f5caa46c

2015-09-30 13:42 +0000 [9f229d6a49]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Move "Set role" warning to be debug.

	  In practice the set_role API callback can be invoked even
	  when no ICE is present on an RTP instance. This can occur
	  if ICE has not been enabled on it.

	  ASTERISK-25438 #close

	  Change-Id: I0e17e4316f0f0d7f095c78c3d4fd73a913b6ba69

2015-09-28 15:31 +0000 [9bc7386b7c]  Richard Mudgett <rmudgett@digium.com>

	* sched.c: Add warning about negative time interval request.

	  Change-Id: Ib91435fb45b7f5f7c0fc83d0eec20b88098707bc

2015-09-25 18:37 +0000 [12feec0bf7]  Richard Mudgett <rmudgett@digium.com>

	* res/ari/config.c: Fix user sort compare function.

	  Made use the ao2 sort compare template function and OBJ_SEARCH_xxx
	  identifiers.

	  Change-Id: Ic53005dc5aafa7a36c72300dd89b75fb63c92f4c

2015-09-25 17:26 +0000 [3f4fa245e5]  Richard Mudgett <rmudgett@digium.com>

	* res/ari/config.c: Optimize conf_alloc() object init.

	  * Now conf_alloc() has more off nominal error checking.

	  * Eliminated RAII_VAR() use in conf_alloc().

	  * Eliminated a dubius shortcut when destroying cfg->general in
	  conf_destructor() that would cause a crash if cfg->general failed to get
	  allocated.

	  * Add some ACO registration section comments.

	  Change-Id: Ia40c2b1b2d0777d641605118ae019c5a73865e1a

2015-09-25 16:48 +0000 [aa00df62ee]  Richard Mudgett <rmudgett@digium.com>

	* res/ari/config.c: Fix conf_alloc() object init.

	  Need to finish initializing the string fields in the ao2 object before
	  putting any default strings into them.

	  ASTERISK-25383 #close
	  Reported by:  yaron nahum

	  Change-Id: I9f7f3a03f0c4991a01593abf8697b9a587c0ea84

2015-09-21 07:26 +0000 [2d7a4a3357]  Matt Jordan <mjordan@digium.com>

	* main/logger: Add log formatters and JSON structured logs

	  When Asterisk is part of a larger distributed system, log files are often
	  gathered using tools (such as logstash) that prefer to consume information
	  and have it rendered using other tools (such as Kibana) that prefer a
	  structured format, e.g., JSON. This patch adds support for JSON formatted
	  logs by adding support for an optional log format specifier in Asterisk's
	  logging subsystem. By adding a format specifier of '[json]':

	  full => [json]debug,verbose,notice,warning,error

	  Log messages will be output to the 'full' channel in the following
	  format:

	  {
	    "hostname": Hostname or name specified in asterisk.conf
	    "timestamp": Date/Time
	    "identifiers": {
	      "lwp": Thread ID,
	      "callid": Call Identifier
	    }
	    "logmsg": {
	      "location": {
	        "filename": Name of the file that generated the log statement
	        "function": Function that generated the log statement
	        "line": Line number that called the logging function
	      }
	      "level": Log level, e.g., DEBUG, VERBOSE, etc.
	      "message": Actual text of the log message
	    }
	  }

	  ASTERISK-25425 #close

	  Change-Id: I8649bfedf3fb7bf3138008cc11565553209cc238

2015-09-27 20:45 +0000 [9402f80726]  Matt Jordan <mjordan@digium.com>

	* res/res_stasis: Fix accidental subscription to 'all' bridge topic

	  When b99a7052621700a1aa641a1c24308f5873275fc8 was merged, subscribing to a
	  NULL bridge will now cause app_subscribe_bridge to implicitly subscribe to
	  all bridges. Unfortunately, the res_stasis control loop did not check that
	  a bridge changing on a channel's control object was actually also non-NULL.
	  As a result, app_subscribe_bridge will be called with a NULL bridge when a
	  channel leaves a bridge. This causes a new subscription to be made to the
	  bridge. If an application has also subscribed to the bridge, the application
	  will now have two subscriptions:
	  (1) The explicit one created by the app
	  (2) The implicit one accidentally created by the control structure

	  As a result, the 'BridgeDestroyed' event can be sent multiple times. This
	  patch corrects the control loop such that it only subscribes an application
	  to a new bridge if the bridge pointer is non-NULL.

	  ASTERISK-24870

	  Change-Id: I3510e55f6bc36517c10597ead857b964463c9f4f

2015-09-04 13:51 +0000 [d6472d96b3]  Scott Griepentrog <scott@griepentrog.com>

	* Scripts: check file versions of Asterisk and dependencies

	  To help in diagnosing mismatched modules and libraries, this
	  script scans for version, repository, and source information
	  and reports what is found.

	  ASTERISK-25376 #close
	  Reported by: Ashley Sanders

	  Change-Id: Ib0642d0fb96712476f59760d6d137a24633fe2d6

2015-09-24 14:56 +0000 [7c7a7ddd27]  Richard Mudgett <rmudgett@digium.com>

	* app_queue.c: Force COLP update if outgoing channel name changed.

	  * When a call is answered and the outgoing channel name has changed then
	  force a connected line update because the channel is no longer the same.
	  The channel was masqueraded into by another channel.  This is usually
	  because of a call pickup.

	  Note: Forwarded calls are handled in a controlled manner so the original
	  channel name is replaced with the forwarded channel.

	  ASTERISK-25423 #close
	  Reported by: John Hardin

	  Change-Id: Ie275ea9e99c092ad369db23e0feb08c44498c172

2015-09-24 14:20 +0000 [145608bd81]  Richard Mudgett <rmudgett@digium.com>

	* app_queue.c: Factor out a connected line update routine.

	  Replace inlined code with update_connected_line_from_peer().

	  ASTERISK-25423
	  Reported by: John Hardin

	  Change-Id: I33bbd033596fcb0208d41d8970369b4e87b806f3

2015-09-24 13:27 +0000 [1d394774b2]  Richard Mudgett <rmudgett@digium.com>

	* app_dial.c: Make 'A' option pass COLP updates.

	  While the 'A' option is playing the announcement file allow the caller and
	  peer to exchange COLP update frames.

	  ASTERISK-25423
	  Reported by: John Hardin

	  Change-Id: Iac6cf89b56d26452c6bb88e9363622bbf23895f9

2015-09-24 12:59 +0000 [680b76eb25]  Richard Mudgett <rmudgett@digium.com>

	* app_dial.c: Force COLP update if outgoing channel name changed.

	  * When a call is answered and the outgoing channel name has changed then
	  force a connected line update because the channel is no longer the same.
	  The channel was masqueraded into by another channel.  This is usually
	  because of a call pickup.

	  Note: Forwarded calls are handled in a controlled manner so the original
	  channel name is replaced with the forwarded channel.

	  ASTERISK-25423
	  Reported by: John Hardin

	  Change-Id: I2e01f7a698fbbc8c26344a59c2be40c6cd98b00c

2015-09-24 12:37 +0000 [fdf0bcb04a]  Richard Mudgett <rmudgett@digium.com>

	* app_dial.c: Factor out a connected line update routine.

	  Replace inlined code with update_connected_line_from_peer().

	  ASTERISK-25423
	  Reported by: John Hardin

	  Change-Id: Ia14f18def417645cd7fb453e1bdac682630a5091

2015-09-23 17:41 +0000 [c285879845]  Richard Mudgett <rmudgett@digium.com>

	* app_dial.c: Remove some no-op code.

	  Change-Id: Ice1884a94315d3cb7e3bbd47a9fba76a27276c54

2015-09-23 14:02 +0000 [3eefa07a39]  Mark Michelson <mmichelson@digium.com>

	* logger: Prevent duplicate dynamic channels from being added.

	  There was a problem observed where the "logger add channel" CLI command
	  would allow for a channel with the same name to be added multiple times.
	  This would result in each message being written out to the same file
	  multiple times.

	  The problem was due to the difference in how logger channel filenames
	  are stored versus the format they are allowed to be presented when they
	  are added. For instance, if adding the logger channel "foo" through the
	  CLI, the result would be a logger channel with the file name
	  /var/log/asterisk/foo being stored. So when trying to add another "foo"
	  channel, "foo" would not match "/var/log/asterisk/foo" so we'd happily
	  add the duplicate channel.

	  The fix presented here is to introduce two new methods in the logger
	  code:
	   * make_filename(): given a logger channel name, this creates the
	     filename for that logger channel.
	   * find_logchannel(): given a logger channel name, this calls
	     make_filename() and then traverses the list of logchannels in order
	     to find a match.

	  This change has made use of make_filename() and find_logchannel()
	  throughout to more consistently behave.

	  ASTERISK-25305 #close
	  Reported by Mark Michelson

	  Change-Id: I892d52954d6007d8bc453c3cbdd9235dec9c4a36

2015-09-24 14:49 +0000 [f42084be09]  Mark Michelson <mmichelson@digium.com>

	* Do not swallow frames on channels leaving bridges.

	  When leaving a bridge, indications on a channel could be swallowed by
	  the internal indication logic because it appears that the channel is on
	  its way to be hung up anyway. One such situation where this is
	  detrimental is when channels on hold are redirected out of a bridge. The
	  AST_CONTROL_UNHOLD indication from the bridging code is swallowed,
	  leaving the channel in question to still appear to be on hold.

	  The fix here is to modify the logic inside ast_indicate_data() to not
	  drop the indication if the channel is simply leaving a bridge. This way,
	  channels on hold redirected out of a bridge revert to their expected "in
	  use" state after the redirection.

	  ASTERISK-25418 #close
	  Reported by Mark Michelson

	  Change-Id: If6115204dfa0551c050974ee138fabd15f978949

2015-09-22 17:08 +0000 [06f4f80a63]  Richard Mudgett <rmudgett@digium.com>

	* app_page.c: Fix crash when forwarding with a predial handler.

	  Page uses the async method of dialing with the dial API.  When a call gets
	  forwarded there is no calling channel available.  If the predial handler
	  was set then the calling channel could not be put into auto-service
	  for the forwarded call because it doesn't exist.  A crash is the result.

	  * Moved the callee predial parameter string processing to before the
	  string is passed to the dial API rather than having the dial API do it.
	  There are a few benefits do doing this.  The first is the predial
	  parameter string processing doesn't need to be done for each channel
	  called by the dial API.  The second is in async mode and the forwarded
	  channel is to have the predial handler executed on it then the
	  non-existent calling channel does not need to be present to process the
	  predial parameter string.

	  * Don't start auto-service on a non-existent calling channel to execute
	  the predial handler when the dial API is in async mode and forwarding a
	  call.

	  ASTERISK-25384 #close
	  Reported by: Chet Stevens

	  Change-Id: If53892b286d29f6cf955e2545b03dcffa2610981

2015-09-04 12:25 +0000 [b99a705262]  Matt Jordan <mjordan@digium.com>

	* ARI: Add the ability to subscribe to all events

	  This patch adds the ability to subscribe to all events. There are two possible
	  ways to accomplish this:
	  (1) On initial WebSocket connection. This patch adds a new query parameter,
	      'subscribeAll'. If present and True, Asterisk will subscribe the
	      applications to all ARI events.
	  (2) Via the applications resource. When subscribing in this manner, an ARI
	      client should merely specify a blank resource name, i.e., 'channels:'
	      instead of 'channels:12354'. This will subscribe the application to all
	      resources of the 'channels' type.

	  ASTERISK-24870 #close

	  Change-Id: I4a943b4db24442cf28bc64b24bfd541249790ad6

2015-09-21 18:06 +0000 [c74101509d]  Kevin Harwell <kharwell@digium.com>

	* app_record: RECORDED_FILE variable not being populated

	  The RECORDED_FILE variable is empty unless a '%d' is specified in the filename.
	  This patch makes it so the variable is always set to the filename.

	  ASTERISK-25410 #close

	  Change-Id: I4ec826d8eb582ae2ad184e717be8668b74d37653

2015-09-21 08:16 +0000 [a29cf45c76]  Elazar Broad <elazar@thebroadfamily.com>

	* core/logging: Fix logging to more than one syslog channel

	  Currently, Asterisk will log to the last configured syslog
	  channel in logger.conf. This is due to the fact that the
	  final call to openlog() supersedes all of the previous calls.
	  This commit removes the call to openlog() and passes the
	  facility to ast_log_vsyslog(), along with utilizing the
	  LOG_MAKEPRI macro to ensure that the message is routed to
	  the correct facility and with the correct priority.

	  ASTERISK-25407 #close
	  Reported by: Elazar Broad
	  Tested by: Elazar Broad

	  Change-Id: Ie2a2416bc00cce1b04e99ef40917c2011953ddd2
2015-09-04 12:24 +0000 [47813cc51c]  Matt Jordan <mjordan@digium.com>

	* res/res_stasis_device_state: Allow for subscribing to 'all' device state

	  This patch adds support for subscribing to all device state changes. This is
	  done either by subscribing to an empty device, e.g., 'eventSource=deviceState:',
	  or by the WebSocket connection specifying that it wants all state in the
	  system.

	  ASTERISK-24870

	  Change-Id: I9cfeca1c9e2231bd7ea73e45919111d44d2eda32

2015-09-03 21:19 +0000 [5206aa9d30]  Matt Jordan <mjordan@digium.com>

	* ARI: Add events for Contact and Peer Status changes

	  This patch adds support for receiving events regarding Peer status changes
	  and Contact status changes. This is particularly useful in scenarios where
	  we are subscribed to all endpoints and channels, where we often want to know
	  more about the state of channel technology specific items than a single
	  endpoint's state.

	  ASTERISK-24870

	  Change-Id: I6137459cdc25ce27efc134ad58abf065653da4e9

2015-09-19 12:49 +0000 [9200ad03a3]  Alexander Traud <pabstraud@compuserve.com>

	* astfd: Adds a timestamp for each entry.

	  Now with menuselect "DEBUG_FD_LEAKS" and CLI "core show fd", a timestamp is
	  shown with each file descriptor. This helps to debug leaked UDP/TCP ports on
	  long-lived servers, for example.

	  ASTERISK-25405 #close

	  Change-Id: I968339e5155a512eba1032a5263f1ec8b5e1f80b

2015-09-16 08:22 +0000 [42a897c4c3]  Joshua Colp <jcolp@digium.com>

	* pbx: Update device and presence state when changing a hint extension.

	  When changing a hint extension without removing the hint first the
	  device state and presence state is not updated. This causes the state
	  of the hint to be that of the previous extension and not the current
	  one. This state is kept until a state change occurs as a result of
	  something (presence state change, device state change).

	  This change updates the hint with the current device and presence
	  state of the new extension when it is changed. Any state callbacks
	  which may have been added before the hint extension is changed are
	  also informed of the new device and presence state if either have
	  changed.

	  ASTERISK-25394 #close

	  Change-Id: If268f1110290e502c73dd289c9e7e7b27bc8432f

2015-09-17 16:34 +0000 [d9723d242a]  Scott Griepentrog <scott@griepentrog.com>

	* CHAOS: avoid crash if string create fails

	  Validate string buffer allocation before using them.

	  ASTERISK-25323

	  Change-Id: Ib9c338bdc1e53fb8b81366f0b39482b83ef56ce0

2015-09-11 01:52 +0000 [99aa7cb26e]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* dr_adaptive_odbc.c, cel_odbc.c, cel_pgsql.c: REFACTOR Macro LENGTHEN_BUF

	  Remove repeated code on macro of assigned buffer to SQL vars

	  Change-Id: Icb19ad013124498e172ea1d0b29ccd0ed17deef0

2015-09-17 04:52 +0000 [e4df271a3e]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Fix From header truncation for extremely long CALLERID(name).

	  The CALLERID(num) and CALLERID(name) and other info are placed into the
	  `char from[256]` in initreqprep. If the name was too long, the addr-spec
	  and params wouldn't fit.

	  Code is moved around so the addr-spec with params is placed there first,
	  and then fitting in as much of the display-name as possible.

	  ASTERISK-25396 #close

	  Change-Id: I33632baf024f01b6a00f8c7f35c91e5f68c40260

2015-09-17 16:59 +0000 [e1927915bc]  Richard Mudgett <rmudgett@digium.com>

	* CHAOS: res_pjsip_diversion avoid crash if allocation fails

	  Validate ast_malloc buffer returned before using it in
	  set_redirecting_value().

	  ASTERISK-25323

	  Change-Id: I15d2ed7cb0546818264c0bf251aa40adeae83253

2015-09-17 16:47 +0000 [729a4325da]  Kevin Harwell <kharwell@digium.com>

	* app_queue: AgentComplete event has wrong reason

	  When a queued caller transfers an agent to another extension sometimes the
	  raised AgentComplete event has a reason of "caller" and sometimes "transfer".
	  Since a transfer has taken place this should always be transfer. This occurs
	  because sometimes the stasis hangup event arrives before the transfer event
	  thus writing a different reason out.

	  With this patch, when a hangup event is received during a transfer it will
	  check to see if the channel that is hanging up is part of a transfer. If so
	  it will return and let the subsequently received transfer event handler take
	  care of the cleanup.

	  ASTERISK-25399 #close

	  Change-Id: Ic63c49bd9a5ed463ea7a032fd2ea3d63bc81a50d

2015-09-17 13:09 +0000 [87f04d5acf]  Scott Griepentrog <scott@griepentrog.com>

	* PJSIP: avoid crash when getting rtp peer

	  Although unlikely, if the tech private is returned as
	  a NULL, chan_pjsip_get_rtp_peer() would crash.

	  ASTERISK-25323

	  Change-Id: Ie231369bfa7da926fb2b9fdaac228261a3152e6a

2015-09-17 11:31 +0000 [63ede41227]  Kevin Harwell <kharwell@digium.com>

	* app_queue: Crash when transferring

	  During some transfer scenarios involving queues Asterisk would sometimes
	  crash when trying to obtain a channel snapshot (could happen on caller or
	  member channels). This occurred because the underlying channel had already
	  disappeared when trying to obtain the latest snapshot.

	  This patch adds a reference to both the member and caller channels that
	  extends to the lifetime of the queue'd call, thus making sure the channels
	  will always exist when retrieving the latest snapshots.

	  ASTERISK-25185 #close
	  Reported by: Etienne Lessard

	  Change-Id: Ic397fa68fb4ff35fbc378e745da9246a7b552128

2015-09-16 17:36 +0000 [e47396721f]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Eliminate race during initial NOTIFY.

	  There is a slim chance of a race condition occurring where two threads
	  can both attempt to manipulate the same area.

	  Thread A can be handling an incoming initial SUBSCRIBE request. Thread A
	  lets the specific subscription handler know that the subscription has
	  been established.

	  At this point, Thread B may detect a state change on the subscribed
	  resource and queue up a notification task on Thread C, the subscription
	  serializer thread.

	  Now Thread A attempts to generate the initial NOTIFY request to send to
	  the subscriber at the same time that Thread C attempts to generate a
	  state change NOTIFY request to send to the subscriber.

	  The result is that Threads A and C can step on the same memory area,
	  resulting in a crash. The crash has been observed as happening when
	  attempting to allocate more space to hold the body for the NOTIFY.

	  The solution presented here is to queue the subscription establishment
	  and initial NOTIFY generation onto the subscription serializer thread
	  (Thread C in the above scenario). This way, there is no way that a state
	  change notification can occur before the initial NOTIFY is sent, and if
	  there is a quick succession of NOTIFYs, we can guarantee that the two
	  NOTIFY requests will be sent in succession.

	  Change-Id: I5a89a77b5f2717928c54d6efb9955e5f6f5cf815

2015-08-28 15:42 +0000 [077adf48b8]  Alexander Traud <pabstraud@compuserve.com>

	* translate: Fix transcoding while different in frame size.

	  When Asterisk translates between codecs, each with a different frame size (for
	  example between iLBC 30 and Speex-WB), too large frames were created by
	  ast_trans_frameout. Now, ast_trans_frameout is called with the correct frame
	  length, creating several frames when necessary. Affects all transcoding modules
	  which used ast_trans_frameout: GSM, iLBC, LPC10, and Speex.

	  ASTERISK-25353 #close

	  Change-Id: I2e229569d73191d66a4e43fef35432db24000212

2015-09-10 17:19 +0000 [0a74c80300]  Mark Michelson <mmichelson@digium.com>

	* scheduler: Use queue for allocating sched IDs.

	  It has been observed that on long-running busy systems, a scheduler
	  context can eventually hit INT_MAX for its assigned IDs and end up
	  overflowing into a very low negative number. When this occurs, this can
	  result in odd behaviors, because a negative return is interpreted by
	  callers as being a failure. However, the item actually was successfully
	  scheduled. The result may be that a freed item remains in the scheduler,
	  resulting in a crash at some point in the future.

	  The scheduler can overflow because every time that an item is added to
	  the scheduler, a counter is bumped and that counter's current value is
	  assigned as the new item's ID.

	  This patch introduces a new method for assigning scheduler IDs. Instead
	  of assigning from a counter, a queue of available IDs is maintained.
	  When assigning a new ID, an ID is pulled from the queue. When a
	  scheduler item is released, its ID is pushed back onto the queue. This
	  way, IDs may be reused when they become available, and the growth of ID
	  numbers is directly related to concurrent activity within a scheduler
	  context rather than the uptime of the system.

	  Change-Id: I532708eef8f669d823457d7fefdad9a6078b99b2

2015-09-03 21:15 +0000 [45cf79665c]  Matt Jordan <mjordan@digium.com>

	* main/config_options: Check for existance of internal object before derefing

	  Asterisk can load and register an object type while still having an invalid
	  sorcery mapping. This can cause an issue when a creation call is invoked.
	  For example, mis-configuring PJSIP's endpoint identifier by IP address mapping
	  in sorcery.conf will cause the sorcery mechanism to be invalidated; however, a
	  subsequent ARI invocation to create the object will cause a crash, as the
	  internal type may not be registered as sorcery expects.

	  Merely checking for a NULL pointer here solves the issue.

	  Change-Id: I54079fb94a1440992f4735a9a1bbf1abb1c601ac

2015-08-21 21:50 +0000 [34aa96bef4]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* chan_sip.c: Validation on module reload

	  Change validation on reload module because now used the cli function for
	  reload. The sip_reload() function never fail and ever return NULL for this
	  reason on reload() now use the call the sip_reload() and return
	  AST_MODULE_LOAD_SUCCESS.

	  This problem is dectected on reload by PUT method on ARI, getting always
	  404 http code when the module is reloaded.

	  ASTERISK-25325 #close
	  Reporte by: Rodrigo Ramírez Norambuena

	  Change-Id: I41215877fb2cfc589e0d4d464000cf6825f4d7fb

2015-08-21 17:39 +0000 [69824fdfbf]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Mark ast_sip_create_subscription() as not used.

	  Change-Id: I2b8db18eac36c01a5c7eb9467699124e203fd093

2015-09-09 12:24 +0000 [2526659432]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Add some notification comments.

	  Change-Id: Ie62ff1f4b7adc1a12fa0303f53926af249b25e20

2015-08-21 18:01 +0000 [9b290dfe2f]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Set dlg_status code instead of sending SIP response.

	  We should not try to send a SIP response message because we may be
	  restoring a persistent subscription where we are not responding to a SIP
	  request.

	  Change-Id: Id89167ef90320c5563f37e632db0dda6cb9e7dec

2015-08-21 17:40 +0000 [73eb132012]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Fix off-nominal memory leak.

	  Fix off-nominal visited vector leak in build_resource_tree().

	  Change-Id: If0399c7941c9c0b1038bcfb7b9a371760977831c

2015-08-21 15:26 +0000 [2b30fc2b2d]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Fix one byte buffer overrun error.

	  ast_sip_pubsub_register_body_generator() did not account for the null
	  terminator set by sprintf() in the allocated output buffer.

	  Change-Id: I388688a132e479bca6ad1c19275eae0070969ae2

2015-08-21 15:25 +0000 [08a182c8e6]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Use ast_alloca() instead of alloca().

	  Change-Id: Ia396096b4fedc2874649ca11137612c3f55e83e3

2015-08-21 11:04 +0000 [61f30db877]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_pubsub.c: Add missing error return in load_module().

	  Change-Id: I15debd0f717f16ee2f78e7f56151c3b3b97b72fc

2015-08-21 11:03 +0000 [b8f07527b2]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip/location.c: Use the builtin ao2_callback() match function instead.

	  Change-Id: I364906d6d2bad3472929986704a0286b9a2cbe3f

2015-09-10 09:49 +0000 [f1a2e82d49]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Copy default_from_user to avoid crash.

	  The default_from_user retrieval function was pulling the
	  default_from_user from the global configuration struct in an unsafe way.
	  If using a database as a backend configuration store, the global
	  configuration struct is short-lived, so grabbing a pointer from it
	  results in referencing freed memory.

	  The fix here is to copy the default_from_user value out of the global
	  configuration struct.

	  Thanks go to John Hardin for discovering this problem and proposing the
	  patch on which this fix is based.

	  ASTERISK-25390 #close
	  Reported by Mark Michelson

	  Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c

2015-09-10 08:39 +0000 [bd71dcd1da]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_nat: Ignore REGISTER requests when looking for a Record-Route

	  We will only rewrite the Contact header if there is no Record-Route header in
	  the received request. If a malfunctioning proxy places a Record-Route header
	  into a REGISTER request, we will decide that we shouldn't update the IP/port
	  in the Contact header, and we will end up storing a contact with an AoR that
	  contains the NAT'd IP address.

	  While it is nice to have the proxy *not* send a Record-Route in a REGISTER
	  request, it's also a good idea to not process the header in a non-dialog
	  message. This patch updates the code to explicitly ignore the Record-Route
	  header in REGISTER requests.

	  ASTERISK-25387 #close

	  Change-Id: I4bd3bcccc4003d460cc354d986b0dea2e433ef3f

2015-09-09 16:46 +0000 [5bd363010e]  Alexander Anikin <may213@yandex.ru>

	* chan_ooh323: Add ProgressIndicator IE with inband info available

	  Add ProgressIndicator IE with inband info present to Progress and
	  Alerting Q.931 message

	  ASTERISK-25227 #close
	  Reported by: Alexandr Dranchuk

	  Change-Id: I326ad13cb1db9a72b3fd902bafed3c28a3684203
2015-09-08 10:35 +0000 [fcea6910f6]  Scott Griepentrog <scott@griepentrog.com>

	* pjsip: avoid possible crash req_caps allocation failure

	  Make certain that the pjsip session has not failed to
	  allocate the format capabilities structure, which can
	  otherwise cause a crash when referenced.

	  ASTERISK-25323

	  Change-Id: I602790ba12714741165e441cc64a3ecde4cb5750

2015-09-04 16:33 +0000 [8e5ed27a16]  David M. Lee <dlee@respoke.io>

	* res_rtp_asterisk: Add more ICE debugging

	  In working through a recent ICE negotiation bug, I found the debug
	  logging in res_rtp_asterisk to be lacking. This patch adds a number of
	  debug and warning statements that were helpful.

	  Change-Id: I950c6d8f13a41f14b3d6334b4cafe7d4e997be80
2015-09-08 07:21 +0000 [3628e380b8]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Use hash for contact object identity instead of Contact URI.

	  In the wild it is possible for Contact URIs to be quite long as
	  parameters can exist on them. This can present a problem when storing
	  them in the AstDB as the URI is used as part of the object name and
	  there is a fixed length limit for the AstDB. This will cause
	  the contact to not get stored.

	  This change uses the MD5 hash of the Contact URI as part of the
	  object name instead. This has a fixed length which is guaranteed
	  to not exceed the AstDB length limit.

	  ASTERISK-25295 #close

	  Change-Id: Ie8252a75331ca00b41b9f308f42cc1fbdf701a02

2015-09-07 13:19 +0000 [d2106c0b21]  Alexander Anikin <may213@yandex.ru>

	* chan_ooh323: call ast_rtp_instance_stop on ooh323_destroy

	      Call ast_rtp_instance_stop on ooh323_destroy to free resources
	      allocated by rtp instance

	      ASTERISK-25299 #close
	      Report by: Alexandr Dranchuk

	  Change-Id: I455096bd7da016b871afe90af86067c2c7c9f33f

2015-09-07 11:15 +0000 [ef3358d0c0]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip: Purge contacts when an AoR is deleted

	  When an AoR is deleted by an external mechanism, such as through ARI, we
	  currently do not remove dynamic contacts that were created for that AoR as a
	  result of a received REGISTER request. As a result, re-creating the AoR will
	  cause the dynamic contact to be interpreted as a persistent contact, leading
	  to some rather strange state being created for the contacts/endpoints.

	  This patch adds a sorcery observer for the 'aor' object. When a delete is
	  issued on the underlying sorcery object, the observer is called, and all
	  contacts created and persisted in sorcery for that AoR are also removed. Note
	  that we don't want to perform this action when an AO2 object that is an AoR is
	  destroyed, as the AoR can still exist in the backing storage (and we would
	  thus be removing valid contacts from an AoR that still "exists".)

	  ASTERISK-25381 #close

	  Change-Id: I6697e51ef6b2858b5d63401f35dc378bb0f90328

2015-09-05 14:58 +0000 [86b02228f5]  Matt Jordan <mjordan@digium.com>

	* channels/pjsip/dialplan_functions: Add an option for extracting the SIP call-id

	  This patch adds a new option to the CHANNEL function that allows for the
	  extraction of the SIP call-id. It is used in conjunction with the 'pjsip'
	  option, and will return the Call-ID of the INVITE request that established
	  the PJSIP channel.

	  ASTERISK-25352

	  Change-Id: I278d1f8bcfe3a53c5aa1dadebc14e92b0abd476a

2015-09-04 16:06 +0000 [27c89053b0]  David M. Lee <dlee@respoke.io>

	* Fix when remote candidates exceed PJ_ICE_MAX_CAND

	  We were passing the wrong count into pj_ice_sess_create_check_list(),
	  causing the create to fail if we ever received more than PJ_ICE_MAX_CAND
	  candidates.

	  Change-Id: I0303d8e1ecb20a8de9fe629a3209d216c4028378

2015-09-04 14:40 +0000 [993ae9a669]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Change default from user value.

	  When Asterisk sends an outbound SIP request, if there is no direct
	  reason to place a specific value for the username in the From header,
	  Asterisk would generate a UUID. For example, this would happen when
	  sending outbound OPTIONS requests when qualifying or when sending
	  outbound INVITE requests when originating (if no explicit caller ID were
	  provided). The issue is that some SIP providers reject these sorts of
	  requests with a "Name too long" error response.

	  This patch aims to fix this by changing the default outbound username in
	  From headers to "asterisk". This value can be overridden by changing the
	  default_from_user option in the global options if desired.

	  ASTERISK-25377 #close
	  Reported by Mark Michelson

	  Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190

2015-09-03 14:07 +0000 [7d981b787c]  Jonathan Rose <jrose@digium.com>

	* ParkAndAnnounce: Add variable inheritance

	  In Asterisk 11, the announcer channel would receive channel variables
	  from the channel being parked by means of normal channel inheritance.
	  This functionality was lost during the big res_parking project in
	  Asterisk 12. This patch restores that functionality.

	  ASTERISK-25369 #close
	  Review: https://gerrit.asterisk.org/#/c/1180/

	  Change-Id: Ie47e618330114ad2ea91e2edcef1cb6f341eed6e

2015-09-04 09:26 +0000 [7691035312]  Scott Griepentrog <scott@griepentrog.com>

	* endpoint snapshot: avoid second cleanup on alloc failure

	  In ast_endpoint_snapshot_create(), a failure to init the
	  string fields results in two attempts to ao2_cleanup the
	  same pointer.  Removed RAII_VAR to eliminate problem.

	  ASTERISK-25375 #close
	  Reported by: Scott Griepentrog

	  Change-Id: If4d9dfb1bbe3836b623642ec690b6d49b25e8979

2015-09-04 05:33 +0000 [be31747db8]  Martin Tomec <tomec.martin@gmail.com>

	* res/pjsip: Mark WSS transport as secure

	  Pjsip is refusing to use unsecure transport with "sips" in url.
	  WSS should be considered as secure transport.

	  ASTERISK-24602 #comment Partially fixed by setting WSS as secure

	  Change-Id: Iddac406c6deba6240c41a603b8859dfefe1a5353

2015-09-01 10:16 +0000 [fbdb42c9fc]  Guido Falsi <madpilot@freebsd.org>

	* Core/General: Add #ifdef needed on FreeBSD.

	  pthread_attr_init() defaults to PTHREAD_EXPLICIT_SCHED on FreeBSD
	  too.

	  ASTERISK-25310 #close
	  Reported by: Guido Falsi

	  Change-Id: Iae6befac9028b5b9795f86986a4a08a1ae6ab7c4
2015-09-02 17:26 +0000 [c15d8cc0ed]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Fix contact refleak on stateful responses.

	  When sending a stateful response, creation of the transaction can fail,
	  most commonly because we are trying to create a transaction from a
	  retransmitted request. When creation of the transaction fails, we end up
	  leaking a reference to a contact that was bumped when the response was
	  created.

	  This patch adds the missing deref and fixes the reference leak.

	  Change-Id: I2f97ad512aeb1b17e87ca29ae0abacb4d6395f07

2015-09-02 12:41 +0000 [b51cf1e712]  Joshua Colp <jcolp@digium.com>

	* pbx: Fix crash when issuing "core show hints" with long pattern match.

	  When issuing the "core show hints" CLI command a combination of both
	  the hint extension and context is created. This uses a fixed size
	  buffer expecting that the extension will not exceed maximum extension
	  length. When the extension is actually a pattern match this constraint
	  does not hold true, and the extension may exceed the maximum extension
	  length. In this case extra characters are written past the end of the
	  fixed size buffer.

	  This change makes it so the construction of the combined hint extension
	  and context can not exceed the size of the buffer.

	  ASTERISK-25367 #close

	  Change-Id: Idfa1b95d0d4dc38e675be7c1de8900b3f981f499

2015-09-01 09:05 +0000 [beb568e51c]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: re-re-fix persistent subscription storage.

	  A recent change to res_pjsip_pubsub switched to using pjsip_msg_print as
	  a means of writing an appropriate packet to persistent storage. While
	  this partially solved the issue, it had its own problems.
	  pjsip_msg_print will always add a Content-Length header to the message
	  it prints. Frequent restarts of Asterisk can result in persistent
	  subscriptions being written with five or more Content-Length headers. In
	  addition, sometimes some apparent corruption of individual headers could
	  be seen.

	  This aims to fix the problem by not running a parsed message through an
	  interpreter but rather by taking the raw message and saving it. The
	  logic for what to save is going to be different depending on whether a
	  SUBSCRIBE was received from the wire or if it was pulled from
	  persistence. When receiving a packet from the wire, when using a
	  streaming transport, the rdata->pkt_info.packet may contain multiple SIP
	  messages or fragments. However, the rdata->msg_info.msg_buf will always
	  contain the current SIP message to be processed. When pulling from
	  persistence, though, the rdata->msg_info.msg_buf will be NULL since no
	  transport actually handled the packet. However, since we know that we
	  will always ever pull one SIP message from persistence, we are free to
	  save directly from rdata->pkt_info.packet instead.

	  ASTERISK-25365 #close
	  Reported by Mark Michelson

	  Change-Id: I33153b10d0b4dc8e3801aaaee2f48173b867855b

2015-08-29 10:36 +0000 [fc4d4f5379]  Joshua Colp <jcolp@digium.com>

	* taskprocessor: Fix race condition between unreferencing and finding.

	  When unreferencing a taskprocessor its reference count is checked
	  to determine if it should be unlinked from the taskprocessors
	  container and its listener shut down. In between the time when the
	  reference count is checked and unlinking it is possible for
	  another thread to jump in, find it, and get a reference to it. If
	  the thread then uses the taskprocessor it may find that it is not
	  in the state it expects.

	  This change locks the taskprocessors container during almost the
	  entire unreference operation to ensure that any other thread which
	  may attempt to find the taskprocessor has to wait.

	  ASTERISK-25295

	  Change-Id: Icb842db82fe1cf238da55df92e95938a4419377c

2015-08-28 20:22 +0000 [bb38010c67]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Fix multiple keepalive scheduled items.

	  The keepalive support in res_pjsip_sdp_rtp currently assumes
	  that a stream will only be negotiated once. This is false.
	  If the stream is replaced and later added back it can be
	  negotiated again causing multiple keepalive scheduled items
	  to exist. This change explicitly deletes the existing
	  keepalive scheduled item before adding the new one.

	  The res_pjsip_sdp_rtp module also does not stop RTP
	  keepalives or timeout timer if the stream has been
	  replaced. This change adds a callback to the session media
	  interface to allow a media stream to be stopped without
	  the resources being destroyed. This allows the scheduled
	  items and RTP to be stopped when the stream no longer
	  exists.

	  ASTERISK-25356 #close

	  Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de

2015-08-28 19:57 +0000 [c036e50fbe]  Joshua Colp <jcolp@digium.com>

	* sched: ast_sched_del may return prematurely due to spurious wakeup

	  When deleting a scheduled item if the item in question is currently
	  executing the ast_sched_del function waits until it has completed.
	  This is accomplished using ast_cond_wait. Unfortunately the
	  ast_cond_wait function can suffer from spurious wakeups so the
	  predicate needs to be checked after it returns to make sure it has
	  really woken up as a result of being signaled.

	  This change adds a loop around the ast_cond_wait to make sure that
	  it only exits when the executing task has really completed.

	  ASTERISK-25355 #close

	  Change-Id: I51198270eb0b637c956c61aa409f46283432be61

2015-08-27 12:26 +0000 [229b95d253]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Don't invoke session supplements twice for BYE requests.

	  When a BYE request is received the PJSIP invite session implementation
	  creates and sends a 200 OK response before we are aware of it. This
	  causes the INVITE session state callback to be called into and ultimately
	  the session supplements run on the BYE request. Once this response has
	  been sent the normal transaction state callback is invoked which
	  invokes the session supplements on the BYE request again. This can
	  be problematic in particular with res_pjsip_rfc3326 as it may
	  attempt to update the hangup cause code on the channel while it is
	  in the process of being hung up.

	  This change makes it so the session supplements are only invoked
	  once by the INVITE session state callback.

	  ASTERISK-25318 #close

	  Change-Id: I69c17df55ccbb61ef779ac38cc8c6b411376c19a

2015-08-26 15:26 +0000 [6bfa14bdad]  Scott Griepentrog <scott@griepentrog.com>

	* Chaos: handle failed allocation in get_media_encryption_type

	  If the ast_strndup() call fails to allocate a copy of the
	  transport string for parsing, fail gracefully.

	  ASTERISK-25323
	  Reported by: Scott Griepentrog

	  Change-Id: Ia4b905ce6d03da53fea526224455c1044b1a5a28

2015-08-26 14:25 +0000 [490db8ba94]  Scott Griepentrog <scott@griepentrog.com>

	* Chaos: make hangup NULL tolerant

	  In chan_pjsip_new, if allocation of the pvt
	  structure fails, ast_hangup is called.  But
	  it was written to assume pvt was valid, and
	  this change corrects that.

	  ASTERISK-25323
	  Reported by: Scott Griepentrog

	  Change-Id: I5f47860fe9cee4cd56abd3f79b108678ab72cc87
2015-08-26 05:40 +0000 [d03d09aad3]  Joshua Colp <jcolp@digium.com>

	* chan_sip: Allow call pickup to set the hangup cause.

	  The call pickup implementation in chan_sip currently sets the channel
	  hangup cause to "normal clearing" if call pickup is successfully
	  performed. This action overwrites the "answered elsewhere" hangup cause
	  set by the call pickup code and can result in the SIP device in
	  question showing a missed call when it should not.

	  This change sets the hangup cause to "normal clearing" as a
	  default initially but allows the call pickup to change it as
	  needed.

	  ASTERISK-25346 #close

	  Change-Id: I00ac2c269cee9e29586ee2c65e83c70e52a02cff

2015-08-25 07:17 +0000 [d013ecf748]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add common ast_sip_get_host_ip API.

	  Modules commonly used the pj_gethostip function for retrieving the
	  IP address of the host. This function does not cache the result and may
	  result in a DNS lookup occurring, or additional work. If the DNS
	  server is unreachable or network issues arise this can cause the
	  pj_gethostip function to block for a period of time.

	  This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
	  function which does the same thing but caches the host IP address at
	  module load time. This results in no additional work being done each
	  time the local host IP address is needed.

	  ASTERISK-25342 #close

	  Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e

2015-08-24 06:21 +0000 [98d089fb9a]  Joshua Colp <jcolp@digium.com>

	* bridge: Kick channel from bridge if hung up during action.

	  When executing an action in a bridge it is possible for the
	  channel to be hung up without the bridge becoming aware of it.
	  This is most easily reproducible by hanging up when the bridge
	  is streaming DTMF due to a feature timeout. This change makes
	  it so after action execution the channel is checked to determine
	  if it has been hung up and if it has it is kicked from the bridge.

	  ASTERISK-25341 #close

	  Change-Id: I6dd8b0c3f5888da1c57afed9e8a802ae0a053062

2015-08-24 11:04 +0000 [a408369bac]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_pubsub: On recreated notify fail deleted sub_tree is referenced

	  When recreating a subscription it is possible for a freed sub_tree
	  to be referenced when the initial NOTIFY fails to be created.

	  Change-Id: I681c215309aad01b21d611c2de47b3b0a6022788

2015-08-23 18:26 +0000 [3af34441eb]  Matt Jordan <mjordan@digium.com>

	* res_pjsip/pjsip_configuration: Disregard empty auth values

	  When an endpoint is backed by a non-static conf file backend (such as
	  the AstDB or Realtime), the 'auth' object may be returned as being an
	  empty string. Currently, res_pjsip will interpret that as being a valid
	  auth object, and will attempt to authenticate inbound requests. This
	  isn't desired; is an auth value is empty (which the name of an auth
	  object cannot be), we should instead interpret that as being an invalid
	  auth object and skip it.

	  ASTERISK-25339 #close

	  Change-Id: Ic32b0c6eb5575107d5164a8c40099e687cd722c7

2015-08-21 23:37 +0000 [89003ea320]  Rodrigo Ramírez Norambuena <a@rodrigoramirez.com>

	* README*: Remove trailing whitespace

	  Change-Id: I18b7d75187548a9ed55b4f258d21aaaf29d08874

2015-07-28 13:47 +0000 [857923d9c7]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Set preferred rx payload type mapping on incoming offers.

	  ASTERISK-25166
	  Reported by: Kevin Harwell

	  ASTERISK-17410
	  Reported by: Boris Fox

	  Change-Id: I7f04d5c8bee1126fee5fe6afbc39e45104469f4e

2015-07-24 18:46 +0000 [d643b206c6]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_sdp_rtp.c: Set preferred rx payload type mapping on incoming offers.

	  ASTERISK-25166
	  Reported by: Kevin Harwell

	  ASTERISK-17410
	  Reported by: Boris Fox

	  Change-Id: I97ecebc1ab9b5654fb918bf1f4c98c956b852369

2015-07-27 19:19 +0000 [f7df3e1a01]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.c: Get current or create a needed rx payload type mapping.

	  * Make ast_rtp_codecs_payload_code() get the current mapping or create a
	  rx payload type mapping.

	  ASTERISK-25166
	  Reported by: Kevin Harwell

	  ASTERISK-17410
	  Reported by: Boris Fox

	  Change-Id: Ia4b2d45877a8f004f6ce3840e3d8afe533384e56

2015-07-27 19:15 +0000 [38854a9f7b]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.c: Extract rtp_codecs_payload_replace_rx().

	  ASTERISK-25166
	  Reported by: Kevin Harwell

	  ASTERISK-17410
	  Reported by: Boris Fox

	  Change-Id: I34e23bf5b084c8570f9c3e6ccd19b95fe85af239

2015-07-23 19:24 +0000 [1a549ed134]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.c: Initial split of payload types into rx and tx mappings.

	  There are numerous problems with the current implementation of the RTP
	  payload type mapping in Asterisk.  It uses only one mapping structure to
	  associate payload types to codecs.  The single mapping is overkill if all
	  of the payload type values are well known values.  Dynamic payload type
	  mappings do not work as well with the single mapping because RFC3264
	  allows each side of the link to negotiate different dynamic mappings for
	  what they want to receive.  Not only could you have the same codec mapped
	  for sending and receiving on different payload types you could wind up
	  with the same payload type mapped to different codecs for each direction.

	  1) An independent payload type mapping is needed for sending and
	  receiving.

	  2) The receive mapping needs to keep track of previous mappings because of
	  the slack to when negotiation happens and current packets in flight using
	  the old mapping arrive.

	  3) The transmit mapping only needs to keep track of the current negotiated
	  values since we are sending the packets and know when the switchover takes
	  place.

	  * Needed to create ast_rtp_codecs_payload_code_tx() and make some callers
	  use the new function because ast_rtp_codecs_payload_code() was used for
	  mappings in both directions.

	  * Needed to create ast_rtp_codecs_payloads_xover() for cases where we need
	  to pass preferred codec mappings to the peer channel for early media
	  bridging or when we need to prefer the offered mapping that RFC3264 says
	  we SHOULD use.

	  * ast_rtp_codecs_payloads_xover() and ast_rtp_codecs_payload_code_tx() are
	  the only new public functions created.  All the others were only used for
	  the tx or rx mapping direction so the function doxygen now reflects which
	  direction the function operates.

	  * chan_mgcp.c: Removed call to ast_rtp_codecs_payloads_clear() as doing
	  that makes no sense when processing an incoming SDP.  We would be wiping
	  out any mappings that we set for the possible outgoing SDP we sent
	  earlier.

	  ASTERISK-25166
	  Reported by: Kevin Harwell

	  ASTERISK-17410
	  Reported by: Boris Fox

	  Change-Id: Iaf6c227bca68cb7c414cf2fd4108a8ac98bd45ac

2015-08-19 12:10 +0000 [21d419e4fc]  Richard Mudgett <rmudgett@digium.com>

	* ari/ari_websockets.c: Fix ast_debug parameter type mismatch.

	  This is a type mismatch fix of the debugging commit
	  c63316eec10e1990a88bf4712238d6deb375bfa9 made to find out why
	  a testsuite test was failing only on one of the continuous
	  integration build agents.

	  Change-Id: Iba34f6e87cec331f6ac80e4daff6476ea6f00a75

2015-08-19 10:30 +0000 [53e2a6a829]  Scott Griepentrog <scott@griepentrog.com>

	* contrib: script install_prereq should install sqlite3

	  Asterisk needs the sqlite 3 library, which is package
	  sqlite-devel in CentOS. By adding this package to the
	  script, a problem with configure failing is resolved.

	  ASTERISK-25331 #close
	  Reported by: Kevin Harwell

	  Change-Id: I90efaf6a01914fea03f21e5cdbd91c348f44b0ec

2015-08-18 15:07 +0000 [03eb6cbc10]  Richard Mudgett <rmudgett@digium.com>

	* res_ari_events: Fix shutdown ref leak.

	  ASTERISK-25308 #close
	  Reported by: Joshua Colp

	  Change-Id: I592785bf70ff4b63d00e535b482f40da8e82a082

2015-08-18 14:24 +0000 [e1e7e205bc]  Richard Mudgett <rmudgett@digium.com>

	* res_http_websocket.c: Add missing unref on an off nominal path.

	  Change-Id: I228df6adecd4cb450d03e09e9a38c86bb566e811

2015-08-18 16:06 +0000 [59253a2262]  Richard Mudgett <rmudgett@digium.com>

	* res_http_websocket.c: Fix some off nominal path cleanup.

	  * Remove extraneous unlock on off-nominal path.
	  * Add missing HTTP error reply.

	  Change-Id: I1f402bfe448fba8696b507477cab5f060ccd9b2b

2015-08-18 14:46 +0000 [1f0a9f8a76]  Richard Mudgett <rmudgett@digium.com>

	* res_ari.c: Add missing off nominal unlock and remove a RAII_VAR().

	  Change-Id: I0c5e7b34057f26dadb39489c4dac3015c52f5dbf

2015-08-14 12:55 +0000 [9fb4a96e15]  Richard Mudgett <rmudgett@digium.com>

	* app_queue.c: Fix setting QUEUE_MEMBER 'paused' and 'ringinuse'.

	  Setting the 'paused' and 'ringinuse' options on a queue member using the
	  dialplan function QUEUE_MEMBER did not behave the same way as the
	  equivalent dialplan applications or AMI actions.

	  * Made queue_function_mem_write() call the set_member_paused() and
	  set_member_value() for the 'paused' and 'ringinuse' options respectively.
	  A beneficial side effect is that the queue name is now optional and sets
	  the value in all queues the interface is a member.

	  * Update QUEUE_MEMBER XML documentation.

	  * Fix error checking in QUEUE_MEMBER() write.

	  ASTERISK-25215 #close
	  Reported by: Lorne Gaetz

	  Change-Id: I3a016be8dc94d63a9cc155295ff9c9afa5f707cb

2015-08-17 16:41 +0000 [87b22969a4]  Richard Mudgett <rmudgett@digium.com>

	* app_queue.c: Extract some functions for simpler code.

	  * Extract set_queue_member_pause() from set_member_paused() for simpler
	  and more consistent code.

	  * Extract set_queue_member_ringinuse() from
	  set_member_ringinuse_help_members() for simpler code.

	  Change-Id: Iecc1f4119c63347341d7ea6b65f5fc4963706306

2015-08-17 13:34 +0000 [5cf98e2459]  Richard Mudgett <rmudgett@digium.com>

	* app_queue.c: Fix error checking in QUEUE_MEMBER() read.

	  Change-Id: I7294e13d27875851c2f4ef6818adba507509d224

2015-08-17 11:00 +0000 [178e1adffb]  Scott Griepentrog <scott@griepentrog.com>

	* CHAOS: prevent sorcery object with null id

	  When allocating a sorcery object, fail if the
	  id value was not allocated.

	  ASTERISK-25323
	  Reported by: Scott Griepentrog

	  Change-Id: I152133fb7545a4efcf7a0080ada77332d038669e

2015-08-14 15:46 +0000 [5a85711568]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_sdp_rtp: Restore removed NULL check.

	  When sending an RTP keepalive, we need to be sure we're not dealing with
	  a NULL RTP instance. There had been a NULL check, but the commit that
	  added the rtp_timeout and rtp_hold_timeout options removed the NULL
	  check.

	  Change-Id: I2d7dcd5022697cfc6bf3d9e19245419078e79b64

2015-08-13 12:30 +0000 [7c4cb8618d]  Richard Mudgett <rmudgett@digium.com>

	* audiohook.c: Simplify variable usage in audiohook_read_frame_both().

	  Change-Id: I58bed58631a94295b267991c5b61a3a93c167f0c

2015-08-13 12:22 +0000 [bb37473234]  Richard Mudgett <rmudgett@digium.com>

	* audiohook.c: Fix MixMonitor crash when using the r() or t() options.

	  The built frame format in audiohook_read_frame_both() is now set to a
	  signed linear format before the rx and tx frames are duplicated instead of
	  only for the mixed audio frame duplication.

	  ASTERISK-25322 #close
	  Reported by Sean Pimental

	  Change-Id: I86f85b5c48c49e4e2d3b770797b9d484250a1538

2015-08-12 12:59 +0000 [43bdddfc26]  Kevin Harwell <kharwell@digium.com>

	* chan_sip.c: wrong peer searched in sip_report_security_event

	  In chan_sip, after handling an incoming invite a security event is raised
	  describing authorization (success, failure, etc...). However, it was doing
	  a lookup of the peer by extension. This is fine for register messages, but
	  in the case of an invite it may search and find the wrong peer, or a non
	  existent one (for instance, in the case of call pickup). Also, if the peers
	  are configured through realtime this may cause an unnecessary database lookup
	  when caching is enabled.

	  This patch makes it so that sip_report_security_event searches by IP address
	  when looking for a peer instead of by extension after an invite is processed.

	  ASTERISK-25320 #close

	  Change-Id: I9b3f11549efb475b6561c64f0e6da1a481d98bc4
2015-08-13 05:26 +0000 [495dfb24b7]  Joshua Colp <jcolp@digium.com>

	* res_http_websocket: When shutting down a session don't close closed socket

	  Due to the use of ast_websocket_close in session termination it is
	  possible for the underlying socket to already be closed when the
	  session is terminated. This occurs when the close frame is attempted
	  to be written out but fails.

	  Change-Id: I7572583529a42a7dc911ea77a974d8307d5c0c8b
2015-08-11 05:24 +0000 [7e65be4ecd]  Joshua Colp <jcolp@digium.com>

	* res_http_websocket: Forcefully terminate on write errors.

	  The res_http_websocket module will currently attempt to close
	  the WebSocket connection if fatal cases occur, such as when
	  attempting to write out data and being unable to. When the
	  fatal cases occur the code attempts to write a WebSocket close
	  frame out to have the remote side close the connection. If
	  writing this fails then the connection is not terminated.

	  This change forcefully terminates the connection if the
	  WebSocket is to be closed but is unable to send the close frame.

	  ASTERISK-25312 #close

	  Change-Id: I10973086671cc192a76424060d9ec8e688602845

2015-08-09 18:42 +0000 [a87e2dd254]  Matt Jordan <mjordan@digium.com>

	* res/res_format_attr_silk: Expose format attributes to other modules

	  This patch adds the .get callback to the format attribute module, such
	  that the Asterisk core or other third party modules can query for the
	  negotiated format attributes.

	  Change-Id: Ia24f55cf9b661d651ce89b4f4b023d921380f19c

2015-08-10 13:43 +0000 [87c92d2aee]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi.c: Flush the DAHDI write buffer after starting DTMF.

	  Pressing DTMF digits on a phone to go out on a DAHDI channel can result in
	  the digit not being recognized or even heard by the peer.

	  Phone -> Asterisk -> DAHDI/channel

	  Turns out the DAHDI behavior with DTMF generation (and any other generated
	  tones) is exposed by the "buffers=" setting in chan_dahdi.conf.  When
	  Asterisk requests to start sending DTMF then DAHDI waits until its write
	  buffer is empty before generating any samples for the DTMF tones.  When
	  Asterisk subsequently requests DAHDI to stop sending DTMF then DAHDI
	  immediately stops generating the DTMF samples.  As a result, the more
	  samples there are in the DAHDI write buffer the shorter the time DTMF
	  actually gets sent on the wire.  If there are more samples in the write
	  buffer than the time DTMF is supposed to be sent then no DTMF gets sent on
	  the wire.  With the "buffers=12,half" setting and each buffer representing
	  20 ms of samples then the DAHDI write buffer is going to contain around
	  120 ms of samples.  For DTMF to be recognized by the peer the actual sent
	  DTMF duration needs to be a minimum of 40 ms.  Therefore, the intended
	  duration needs to be a minimum of 160 ms for the peer to receive the
	  minimum DTMF digit duration to recognize it.

	  A simple and effective solution to work around the DAHDI behavior is for
	  Asterisk to flush the DAHDI write buffer when sending DTMF so the full
	  duration of DTMF is actually sent on the wire.  When someone is going to
	  send DTMF they are not likely to be talking before sending the tones so
	  the flushed write samples are expected to just contain silence.

	  * Made dahdi_digit_begin() flush the DAHDI write buffer after requesting
	  to send a DTMF digit.

	  ASTERISK-25315 #close
	  Reported by John Hardin

	  Change-Id: Ib56262c708cb7858082156bfc70ebd0a220efa6a

2015-08-05 14:21 +0000 [b9b957d4e9]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi.c: Lock private struct for ast_write().

	  There is a window of opportunity for DTMF to not go out if an audio frame
	  is in the process of being written to DAHDI while another thread starts
	  sending DTMF.  The thread sending the audio frame could be past the
	  currently dialing check before being preempted by another thread starting
	  a DTMF generation request.  When the thread sending the audio frame
	  resumes it will then cause DAHDI to stop the DTMF tone generation.  The
	  result is no DTMF goes out.

	  * Made dahdi_write() lock the private struct before writing to the DAHDI
	  file descriptor.

	  ASTERISK-25315
	  Reported by John Hardin

	  Change-Id: Ib4e0264cf63305ed5da701188447668e72ec9abb

2015-08-10 18:23 +0000 [f3f5b45d57]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Fix crash from corrupt saved SUBSCRIBE message.

	  If the saved SUBSCRIBE message is not parseable for whatever reason then
	  Asterisk could crash when libpjsip tries to parse the message and adds an
	  error message to the parse error list.

	  * Made ast_sip_create_rdata() initialize the parse error rdata list.  The
	  list is checked after parsing to see that it remains empty for the
	  function to return successful.

	  ASTERISK-25306
	  Reported by Mark Michelson

	  Change-Id: Ie0677f69f707503b1a37df18723bd59418085256

2015-08-10 07:40 +0000 [991d4da1eb]  Alexander Traud <pabstraud@compuserve.com>

	* chan_sip: Fix negotiation of iLBC 30.

	  iLBC 20 was advertised in a SIP/SDP negotiation. However, only iLBC 30 is
	  supported. Removes "a=fmtp:x mode=y" from SDP. Because of RFC 3952 section 5,
	  only iLBC 30 is negotiated now.

	  ASTERISK-25309 #close

	  Change-Id: I92d724600a183eec3114da0ac607b994b1a793da

2015-08-09 17:56 +0000 [e188192ad1]  Matt Jordan <mjordan@digium.com>

	* main/format: Add an API call for retrieving format attributes

	  Some codecs that may be a third party library to Asterisk need to have
	  knowledge of the format attributes that were negotiated. Unfortunately,
	  when the great format migration of Asterisk 13 occurred, that ability
	  was lost.

	  This patch adds an API call, ast_format_attribute_get, to the core
	  format API, along with updates to the unit test to check the new API
	  call. A new callback is also now available for format attribute modules,
	  such that they can provide the format attribute values they manage.

	  Note that the API returns a void *. This is done as the format attribute
	  modules themselves may store format attributes in any particular manner
	  they like. Care should be taken by consumers of the API to check the
	  return value before casting and dereferencing. Consumers will obviously
	  need to have a priori knowledge of the type of the format attribute as
	  well.

	  Change-Id: Ieec76883dfb46ecd7aff3dc81a52c81f4dc1b9e3

2015-08-07 22:11 +0000 [d5f0c27122]  David M. Lee <dlee@respoke.io>

	* Replace htobe64 with htonll

	  We don't have a compatability function to fill in a missing htobe64; but
	  we already have one for the identical htonll.

	  Change-Id: Ic0a95db1c5b0041e14e6b127432fb533b97e4cac

2015-07-24 17:04 +0000 [40caf0ad9b]  David M. Lee <dlee@respoke.io>

	* Replaces clock_gettime() with ast_tsnow()

	  clock_gettime() is, unfortunately, not portable. But I did like that
	  over our usual `ts.tv_nsec = tv.tv_usec * 1000` copy/paste code we
	  usually do when we want a timespec and all we have is ast_tvnow().

	  This patch adds ast_tsnow(), which mimics ast_tvnow(), but returns a
	  timespec. If clock_gettime() is available, it will use that. Otherwise
	  ast_tsnow() falls back to using ast_tvnow().

	  Change-Id: Ibb1ee67ccf4826b9b76d5a5eb62e90b29b6c456e

2015-08-07 14:20 +0000 [12e6f5ac01]  Scott Emidy <jemidy@digium.com>

	* ARI: Retrieve existing log channels

	  An http request can be sent to get the existing Asterisk logs.

	  The command "curl -v -u user:pass -X GET 'http://localhost:8088
	  /ari/asterisk/logging'" can be run in the terminal to access the
	  newly implemented functionality.

	  * Retrieve all existing log channels

	  ASTERISK-25252

	  Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808

2015-08-07 11:14 +0000 [b91ca7ba49]  Scott Emidy <jemidy@digium.com>

	* ARI: Creating log channels

	  An http request can be sent to create a log channel
	  in Asterisk.

	  The command "curl -v -u user:pass -X POST
	  'http://localhost:088/ari/asterisk/logging/mylog?
	  configuration=notice,warning'" can be run in the terminal
	  to access the newly implemented functionality for ARI.

	  * Ability to create log channels using ARI

	  ASTERISK-25252

	  Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782

2015-08-06 15:18 +0000 [f19c4930c2]  Scott Emidy <jemidy@digium.com>

	* ARI: Deleting log channels

	  An http request can be sent to delete a log channel
	  in Asterisk.

	  The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
	  /ari/asterisk/logging/mylog'" can be run in the terminal
	  to access the newly implemented functionally for ARI.

	  * Able to delete log channels using ARI

	  ASTERISK-25252

	  Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6

2015-08-06 12:48 +0000 [382334cc06]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: More accurately persist packet.

	  The pjsip_rx_data structure has a pkt_info.packet field on it that is
	  the packet that was read from the transport. For datagram transports,
	  the packet read from the transport will correspond to the SIP message
	  that arrived. For streamed transports, however, it is possible to read
	  multiple SIP messages in one packet.

	  In a recent case, Asterisk crashed on a system where TCP was being used.
	  This is because at some point, a read from the TCP socket resulted in a
	  200 OK response as well as an incoming SUBSCRIBE request being stored in
	  rdata->pkt_info.packet. When the SUBSCRIBE was processed, the
	  combination 200 OK and SUBSCRIBE was saved in persistent storage. Later,
	  a restart of Asterisk resulted in the crash because the persistent
	  subscription recreation code ended up building the 200 OK response
	  instead of a SUBSCRIBE request, and we attempted to access
	  request-specific data.

	  The fix here is to use the pjsip_msg_print() function in order to
	  persist SUBSCRIBE requests. This way, rather than using the raw socket
	  data, we use the parsed SIP message that PJSIP has given us. If we
	  receive multiple SIP messages from a single read, we will be sure only
	  to save off the relevant SIP message. There also is a safeguard put in
	  place to make sure that if we do end up reconstructing a SIP response,
	  it will not cause a crash.

	  ASTERISK-25306 #close
	  Reported by Mark Michelson

	  Change-Id: I4bf16f7b76a2541d10b55de82bcd14c6e542afb2

2015-08-04 16:12 +0000 [4b6c657a82]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Ensure sanitized XML is NULL terminated.

	  The ast_sip_sanitize_xml function is used to sanitize
	  a string for placement into XML. This is done by examining
	  an input string and then appending values to an output
	  buffer. The function used by its implementation, strncat,
	  has specific behavior that was not taken into account.
	  If the size of the input string exceeded the available
	  output buffer size it was possible for the sanitization
	  function to write past the output buffer itself causing
	  a crash. The crash would either occur because it was
	  writing into memory it shouldn't be or because the resulting
	  string was not NULL terminated.

	  This change keeps count of how much remaining space is
	  available in the output buffer for text and only allows
	  strncat to use that amount.

	  Since this was exposed by the res_pjsip_pidf_digium_body_supplement
	  module attempting to send a large message the maximum allowed
	  message size has also been increased in it.

	  A unit test has also been added which confirms that the
	  ast_sip_sanitize_xml function is providing NULL terminated
	  output even when the input length exceeds the output
	  buffer size.

	  ASTERISK-25304 #close

	  Change-Id: I743dd9809d3e13d722df1b0509dfe34621398302

2015-08-05 05:23 +0000 [7351d33a1f]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Don't leak temporary key when enabling PFS.

	  A change recently went in which enabled perfect forward secrecy for
	  DTLS in res_rtp_asterisk. This was accomplished two different ways
	  depending on the availability of a feature in OpenSSL. The fallback
	  method created a temporary instance of a key but did not free it.
	  This change fixes that.

	  ASTERISK-25265

	  Change-Id: Iadc031b67a91410bbefb17ffb4218d615d051396
2015-08-04 09:47 +0000 [c63316eec1]  Mark Michelson <mmichelson@digium.com>

	* res_http_websocket: Debug write lengths.

	  Commit 39cc28f6ea2140ad6d561fd4c9e9a66f065cecee attempted to fix a
	  test failure observed on 32 bit test agents by ensuring that a cast from
	  a 32 bit unsigned integer to a 64 bit unsigned integer was happening in
	  a predictable place. As it turns out, this did not cause test runs to
	  succeed.

	  This commit adds several redundant debug messages that print the payload
	  lengths of websocket frames. The idea here is that this commit will not
	  cause tests to succeed for the faulty test agent, but we might deduce
	  where the fault lies more easily this way by observing at what point the
	  expected value (537) changes to some ungangly huge number.

	  If you are wondering why something like this is being committed to the
	  branch, keep in mind that in commit
	  39cc28f6ea2140ad6d561fd4c9e9a66f065cecee I noted that the observed test
	  failures only happen when automated tests are run. Attempts to run the
	  tests by hand manually on the test agent result in the tests passing.

	  Change-Id: I14a65c19d8af40dadcdbd52348de3b0016e1ae8d

2015-08-03 11:06 +0000 [35a98161df]  Mark Michelson <mmichelson@digium.com>

	* res_http_websocket: Avoid passing strlen() to ast_websocket_write().

	  We have seen a rash of test failures on a 32-bit build agent. Commit
	  48698a5e21d7307f61b5fb2bd39fd593bc1423ca solved an obvious problem where
	  we were not encoding a 64-bit value correctly over the wire. This
	  commit, however, did not solve the test failures.

	  In the failing tests, ARI is attempting to send a 537 byte text frame
	  over a websocket. When sending a frame this small, 16 bits are all that
	  is required in order to encode the payload length on the websocket
	  frame. However, ast_websocket_write() thinks that the payload length is
	  greater than 65535 and therefore writes out a 64 bit payload length.
	  Inspecting this payload length, the lower 32 bits are exactly what we
	  would expect it to be, 537 in hex. The upper 32 bits, are junk values
	  that are not expected to be there.

	  In the failure, we are passing the result of strlen() to a function that
	  expects a uint64_t parameter to be passed in. strlen() returns a size_t,
	  which on this 32-bit machine is 32 bits wide. Normally, passing a 32-bit
	  unsigned value to somewhere where a 64-bit unsigned value is expected
	  would cause no problems. In fact, in manual runs of failing tests, this
	  works just fine. However, ast_websocket_write() uses the Asterisk
	  optional API, which means that rather than a simple function call, there
	  are a series of macros that are used for its declaration and
	  implementation. These macros may be causing some sort of error to occur
	  when converting from a 32 bit quantity to a 64 bit quantity.

	  This commit changes the logic by making existing ast_websocket_write()
	  calls use ast_websocket_write_string() instead. Within
	  ast_websocket_write_string(), the 64-bit converted strlen is saved in a
	  local variable, and that variable is passed to ast_websocket_write()
	  instead.

	  Note that this commit message is full of speculation rather than
	  certainty. This is because the observed test failures, while always
	  present in automated test runs, never occur when tests are manually
	  attempted on the same test agent. The idea behind this commit is to fix
	  a theoretical issue by performing changes that should, at the least,
	  cause no harm. If it turns out that this change does not fix the failing
	  tests, then this commit should be reverted.

	  Change-Id: I4458dd87d785ca322b89c152b223a540a3d23e67

2015-07-29 14:17 +0000 [1f02d20da4]  Benjamin Ford <bford@digium.com>

	* ARI: Rotate log channels.

	  An http request can be sent to rotate a specified log channel.
	  If the channel does not exist, an error response will be
	  returned.

	  The command "curl -v -u user:pass -X PUT 'http://localhost:8088
	  /ari/asterisk/logging/logChannelName/rotate'" can be run in the
	  terminal to access this new functionality.

	  * Added the ability to rotate log files through ARI

	  ASTERISK-25252

	  Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01

2015-07-31 11:27 +0000 [fe804b09b3]  Ashley Sanders <asanders@digium.com>

	* ARI: Channels added to Stasis application during WebSocket creation ...

	  Prior to ASTERISK-24988, the WebSocket handshake was resolved before Stasis
	  applications were registered. This was done such that the WebSocket would be
	  ready when an application is registered. However, by creating the WebSocket
	  first, the client had the ability to make requests for the Stasis application
	  it thought had been created with the initial handshake request. The inevitable
	  conclusion of this scenario was the cart being put before the horse.

	  ASTERISK-24988 resolved half of the problem by ensuring that the applications
	  were created and registered with Stasis prior to completing the handshake
	  with the client. While this meant that Stasis was ready when the client
	  received the green-light from Asterisk, it also meant that the WebSocket was
	  not yet ready for Stasis to dispatch messages.

	  This patch introduces a message queuing mechanism for delaying messages from
	  Stasis applications while the WebSocket is being constructed. When the ARI
	  event processor receives the message from the WebSocket that it is being
	  created, the event processor instantiates an event session which contains a
	  message queue. It then tries to create and register the requested applications
	  with Stasis. Messages that are dispatched from Stasis between this point and
	  the point at which the event processor is notified the WebSocket is ready, are
	  stashed in the queue. Once the WebSocket has been built, the queue's messages
	  are dispatched in the order in which they were originally received and the
	  queue is concurrently cleared.

	  ASTERISK-25181 #close
	  Reported By: Matt Jordan

	  Change-Id: Iafef7b85a2e0bf78c114db4c87ffc3d16d671a17

2015-07-29 12:58 +0000 [86034227ca]  Mark Michelson <mmichelson@digium.com>

	* dns_core: Allow zero-length DNS responses.

	  A testsuite test recently failed due to a crash that occurred in the DNS
	  core. The problem was that the test could not resolve an address, did
	  not set a result on the DNS query, and then indicated the query was
	  completed. The DNS core does not handle the case of a query with no
	  result gracefully, and so there is a crash.

	  This changeset makes the DNS system resolver set a result with a
	  zero-length answer in the case that a DNS resolution failure occurs
	  early. The DNS core now also will accept such a response without
	  treating it as invalid input. A unit test was updated to no longer treat
	  setting a zero-length response as off-nominal.

	  Change-Id: Ie56641e22debdaa61459e1c9a042e23b78affbf6

2015-07-29 13:49 +0000 [f49bef08a2]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.c: Fix performance issue with several channel drivers that use RTP.

	  ast_rtp_codecs_get_payload() gets called once or twice for every received
	  RTP frame so it would be nice to not allocate an ao2 object to then have
	  it destroyed shortly thereafter.  The ao2 object gets allocated only if
	  the payload type is not set by the channel driver as a negotiated value.
	  The issue affects chan_skinny, chan_unistim, chan_rtp, and chan_ooh323.

	  * Made static_RTP_PT[] an array of ao2 objects that
	  ast_rtp_codecs_get_payload() can return instead of an array of structs
	  that must be copied into a created ao2 object.

	  ASTERISK-25296 #close
	  Reported by: Richard Mudgett

	  Change-Id: Icb6de5cd90bfae07d44403a1352963db9109dac0

2015-07-29 17:00 +0000 [33a465249b]  Richard Mudgett <rmudgett@digium.com>

	* res_rtp_asterisk.c: Fix off-nominal crash potential.

	  ASTERISK-25296
	  Reported by: Richard Mudgett

	  Change-Id: I08549fb7c3ab40a559f41a3940f3732a4059b55b

2015-07-29 13:48 +0000 [5f925d48b7]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.c: Must protect mime_types_len with mime_types_lock.

	  Change-Id: I44220dd369cc151ebf5281d5119d84bb9e54d54e

2015-07-24 18:38 +0000 [ba7dd38470]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_sdp_rtp.c: Fixup some whitespace.

	  Change-Id: Ib4eb7ef7dcaf93ddc26538f0a498aaf110d7a973

2015-07-24 18:42 +0000 [3751bf0971]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_sdp_rtp.c: Fix processing wrong SDP media list.

	  Change-Id: I7c076826c2d3c6ae8c923ca73b7a71980cca11f2

2015-07-27 19:10 +0000 [e2d5d4db35]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.h: No sense allowing payload types larger than RFC allows.

	  * Tweaked add_static_payload() to not use magic numbers.

	  Change-Id: I1719ff0f6d3ce537a91572501eae5bcd912a420b

2015-07-23 14:04 +0000 [bc1eae55cb]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.c: Minor tweaks.

	  * Fix off nominial ref leak of new_type in
	  ast_rtp_codecs_payloads_set_m_type().

	  * No need to lock static_RTP_PT_lock in
	  ast_rtp_codecs_payloads_set_m_type() and
	  ast_rtp_codecs_payloads_set_rtpmap_type_rate() before the payload type
	  parameter sanity check.

	  * No need to create ast_rtp_payload_type ao2 objects with a lock since the
	  lock is not used.

	  Change-Id: I64dd1bb4dfabdc7e981e3f61448beac9bb7504d4

2015-07-17 16:23 +0000 [d122c1e50b]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip.c: Tweak glue->update_peer() parameter nil value.

	  Change glue->update_peer() parameter from 0 to NULL to better indicate it
	  is a pointer.

	  Change-Id: I8ff2e5087f0e19f6998e3488a712a2470cc823bd

2015-07-23 12:41 +0000 [d12dc97fc9]  Richard Mudgett <rmudgett@digium.com>

	* rtp_engine.h: Misc comment fixes.

	  Change-Id: If98139264d5d97427b4685ecbdc54518f725bc43

2015-07-30 17:05 +0000 [077c58cd5c]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Fix crashes seen when call cancelled.

	  Two testsuite tests crashed in the same place as a result of an INVITE
	  being CANCELed.

	  tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_unspecified
	  tests/channels/pjsip/resolver/srv/failover/in_dialog/transport_tcp

	  The session pointer is no longer in the inv->mod_data[session_module.id]
	  location because the INVITE transaction has reached the terminated state.

	  ASTERISK-25297 #close
	  Reported by: Richard Mudgett

	  Change-Id: Idb75fdca0321f5447d5dac737a632a5f03614427

2015-07-29 14:35 +0000 [5fcd1bc556]  Mark Michelson <mmichelson@digium.com>

	* res_http_websocket: Properly encode 64 bit payload

	  A test agent was continuously failing all ARI tests when run against
	  Asterisk 13. As it turns out, the reason for this is that on those test
	  runs, for some reason we decided to use the super extended 64 bit
	  payload length for websocket text frames instead of the extended 16 bit
	  payload length. For 64-bit payloads, the expected byte order over the
	  network is

	  7, 6, 5, 4, 3, 2, 1, 0

	  However, we were sending the payload as

	  3, 2, 1, 0, 7, 6, 5, 4

	  This meant that we were saying to expect an absolutely MASSIVE payload
	  to arrive. Since we did not follow through on this expected payload
	  size, the client would sit patiently waiting for the rest of the payload
	  to arrive until the test would time out.

	  With this change, we use the htobe64() function instead of htonl() so
	  that a 64-bit byte-swap is performed instead of a 32 bit byte-swap.

	  Change-Id: Ibcd8552392845fbcdd017a8c8c1043b7fe35964a

2015-07-29 12:23 +0000 [8fb8988fd4]  Mark Michelson <mmichelson@digium.com>

	* Add a test event for inband ringing.

	  This event is necessary for the bridge_wait_e_options test to be able to
	  confirm that ringing is being played on the local channel that runs the
	  BridgeWait() application with the e(r) option.

	  ASTERISK-25292 #close
	  Reported by Kevin Harwell

	  Change-Id: Ifd3d3d2bebc73344d4b5310d0d55c7675359d72e

2015-07-28 05:33 +0000 [1d081ec970]  Mark Duncan <mark@syon.co.jp>

	* res/res_rtp_asterisk: Add ECDH support

	  This will add ECDH support to Asterisk. It will
	  detect auto ECDH support in OpenSSL
	  (1.0.2b and above) during ./configure. If this is
	  available, it will use it,
	  otherwise it will fall back to prime256v1 (this
	  behavior is consistent with
	  other projects such as Apache and nginx).

	  This fixes WebRTC being broken in Firefox 38+ due
	  to Firefox now only supporting
	  ciphers with perfect forward secrecy.

	  ASTERISK-25265 #close

	  Change-Id: I8c13b33a2a79c0bde2e69e4ba6afa5ab9351465b

2015-07-16 12:16 +0000 [687597ca8c]  Jonathan Rose <jrose@digium.com>

	* holding_bridge: ensure moh participants get frames

	  Currently, if a blank musiconhold.conf is used, musiconhold will fail
	  to start for a channel going into a holding bridge with an anticipation
	  of getting music on hold. That being the case, no frames will be written
	  to the channel and that can pose a problem for blind transfers in PJSIP
	  which may rely on frames being written to get past the REFER framehook.
	  This patch makes holding bridges start a silence generator if starting
	  music on hold fails and makes it so that if no music on hold functions
	  are installed that the ast_moh_start function will report a failure so
	  that consumers of that function will be able to respond appropriately.

	  ASTERISK-25271 #close

	  Change-Id: I06f066728604943cba0bb0b39fa7cf658a21cd99
	  (cherry picked from commit 8458b8d441c2f4143ff135163ff3da4f88fe14c8)

2015-07-18 11:16 +0000 [309dd2a409]  Joshua Colp <jcolp@digium.com>

	* pjsip: Add rtp_timeout and rtp_timeout_hold endpoint options.

	  This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
	  endpoint options. These allow the channel to be hung up if RTP
	  is not received from the remote endpoint for a specified number of
	  seconds.

	  ASTERISK-25259 #close

	  Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9

2015-07-24 09:46 +0000 [a0c31c7a05]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Add rtp_keepalive to sample config file.

	  Change-Id: I5f62d0c5684f8b2335f9f8ac2d79ee04fbdafb19

2015-07-23 13:11 +0000 [d97bed46b7]  Mark Michelson <mmichelson@digium.com>

	* Local channels: Alternate solution to ringback problem.

	  Commit 54b25c80c8387aea9eb20f9f4f077486cbdf3e5d solved an issue where a
	  specific scenario involving local channels and a native local RTP bridge
	  could result in ringback still being heard on a calling channel even
	  after the call is bridged.

	  That commit caused many tests in the testsuite to fail with alarming
	  consequences, such as not sending DialBegin and DialEnd events, and
	  giving incorrect hangup causes during calls.

	  This commit reverts the previous commit and implements and alternate
	  solution. This new solution involves only passing AST_CONTROL_RINGING
	  frames across local channels if the local channel is in AST_STATE_RING.
	  Otherwise, the frame does not traverse the local channels. By doing
	  this, we can ensure that a playtones generator does not get started on
	  the calling channel but rather is started on the local channel on which
	  the ringing frame was initially indicated.

	  ASTERISK-25250 #close
	  Reported by Etienne Lessard

	  Change-Id: I3bc87a18a38eb2b68064f732d098edceb5c19f39

2015-07-22 12:24 +0000 [1cc99ba8b6]  Joshua Colp <jcolp@digium.com>

	* audiohook: Use manipulated frame instead of dropping it.

	  Previous changes to sample rate support in audiohooks accidentally
	  removed code responsible for allowing the manipulate audiohooks
	  to work. Without this code the manipulated frame would be dropped
	  and not used. This change restores it.

	  ASTERISK-25253 #close

	  Change-Id: I3ff50664cd82faac8941f976fcdcb3918a50fe13

2015-07-22 09:46 +0000 [0b7148e262]  Mark Michelson <mmichelson@digium.com>

	* Local channels: Do not block control -1 payloads.

	  Control frames with a -1 payload are used as a special signal to stop
	  playtones generators on channels. This indication is sent both by
	  app_dial as well as by ast_answer() when a call is answered in case any
	  tones were being generated on a calling channel.

	  This control frame type was made to stop traversing local channel pairs
	  as an optimization, because it was thought that it was unnecessary to
	  send these indications, and allowing such unnecessary control frames to
	  traverse the local channels would cause the local channels to optimize
	  away less quickly.

	  As it turns out, through some special magic dialplan code, it is
	  possible to have a tones being played on a non-local channel, and it is
	  important for the local channel to convey that the tones should be
	  stopped. The result of having tones continue to be played on the
	  non-local channel is that the tones play even once the channel has been
	  bridged. By not blocking the -1 control frame type, we can ensure that
	  this situation does not happen.

	  ASTERISK-25250 #close
	  Reported by Etienne Lessard

	  Change-Id: I0bcaac3d70b619afdbd0ca8a8dd708f33fd2f815

2015-07-22 05:16 +0000 [e5fe8d40c8]  Joshua Colp <jcolp@digium.com>

	* audiohook: Read the correct number of samples based on audiohook format.

	  Due to changes in audiohooks to support different sample rates the
	  underlying storage of samples is in the format of the audiohook
	  itself and not of the format being requested. This means that if a
	  channel is using G722 the samples stored will be at 16kHz. If
	  something subsequently reads from the audiohook at a format which
	  is not the same sample rate as the audiohook the number of samples
	  needs to be adjusted.

	  Given the following example:
	  1. Channel writing into audiohook at 16kHz (as it is using G722).
	  2. Chanspy reading from audiohook at 8kHz.

	  The original code would read 160 samples from the audiohook for
	  each 20ms of audio. This is incorrect. Since the audio in the
	  audiohook is at 16kHz the actual number needing to be read is 320.
	  Failure to read this much would cause the audiohook to reset
	  itself constantly as the buffer became full.

	  This change adjusts the requested number of samples by determining
	  the duration of audio requested and then calculating how many
	  samples that would be in the audiohook format.

	  ASTERISK-25247 #close

	  Change-Id: Ia91ce516121882387a315fd8ee116b118b90653d

2015-07-20 15:59 +0000 [293c9f6894]  Elazar Broad <elazar@thebroadfamily.com>

	* cdr/cdr_adaptive_odbc.c: Fix quoted identifier usage when inserting CDR records

	  Commit a24ce38 added support for the use of quoted indentifiers when inserting
	  CDR records into the database. However, the if statement logic responsible for
	  determining whether to use those identifiers is reversed, resulting in a
	  reference to the quoted identifier character buffer which will be null, hence
	  null terminating the SQL query, resulting in a truncated statement which
	  fails to execute.

	  ASTERISK-25263 #close
	  Reported by: Elazar Broad
	  Tested by: Elazar Broad

	  Change-Id: I40da47309b67cc1572207b1515dcc08ec9b1f644
2015-07-20 12:39 +0000 [d02196448b]  Rusty Newton <rnewton@digium.com>

	* Documentation: A couple of trivial fixes in sip.conf.sample and func_cdr.c

	   * In sip.conf.sample fix sentence where we said that WS or WSS are supported
	     transports for use in an outbound register definition. They are not
	     supported in that case.
	   * In func_cdr.c made it clear that the Disable option for CDR_PROP can be used
	     to enable CDR on a channel.

	  ASTERISK-24867 #close
	  Reported by: Rusty Newton

	  ASTERISK-24853 #close
	  Reported by: PSDK

	  Change-Id: I3d698bc6302b9d00a0a995b5c4ad9a42d69b48ca

2015-07-09 14:17 +0000 [2b42264e66]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Add rtp_keepalive endpoint option.

	  This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
	  chan_sip option, this specifies an interval, in seconds, at which we
	  will send RTP comfort noise frames. This can be useful for keeping RTP
	  sessions alive as well as keeping NAT associations alive during lulls.

	  ASTERISK-25242 #close
	  Reported by Mark Michelson

	  Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d

2015-07-16 09:13 +0000 [8b503f2a10]  Michael Cargile <mikec@vicidial.com>

	* res/res_musiconhold: Add a warning when MOH does not exist

	  Change-Id: Ifdfbd0b97cf31478d29923ec30aabce28d01740b

2015-07-19 09:11 +0000 [9475dc9492]  Matt Jordan <mjordan@digium.com>

	* res/res_sorcery_config: Prevent crash from misconfigured sorcery.conf

	  Misconfiguring sorcery.conf with a 'config' wizard with no extra data
	  will currently crash Asterisk on startup, as the wizard requires a comma
	  delineated list to parse. This patch updates res_sorcery_config to check
	  for the presence of the data before it starts manipulating it.

	  Change-Id: I4c97512e8258bc82abe190627a9206c28f5d3847

2015-07-16 09:46 +0000 [649460aa44]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Don't change formats when frame of unsupported format is received.

	  Receipt of an RTP packet currently causes the formats on an PJSIP channel to
	  change to the format of the RTP packet. In some off-nominal cases it's possible
	  for this to be a format that has not been configured or negotiated. This change
	  makes it so only formats explicitly configured on the endpoint are allowed.

	  ASTERISK-25258 #close

	  Change-Id: If93d641fb6418a285928839300d7854cab8c1020

2015-07-14 16:55 +0000 [4a875e8082]  Richard Mudgett <rmudgett@digium.com>

	* pbx.c: Post AMI VarSet event if delete a non-empty dialplan variable.

	  ASTERISK-25256 #close
	  Reported by: Richard Mudgett

	  Change-Id: I0b6be720b66fa956f6a798cd22ef8934eb0c0ff3

2015-07-17 04:59 +0000 [7908ae4934]  Patric Marschall <patric.marschall@1und1.de>

	* sig_pri.h: force_restart_unavailable_chans in wrong scope

	  In channels/sig_pri.h, struct sig_pri_span, the field
	  force_restart_unavailable_chans is only defined if

	  #if defined(HAVE_PRI_MCID) is true.

	  All other occurences of force_restart_unavailable_chans are outside of the

	  #if defined(HAVE_PRI_MCID)
	  endif

	  scope.

	  ASTERISK-25257 #close
	  Reported by: Patric Marschall

	  Change-Id: I071de89cc2cd0d85927a013036e235851f672549

2015-07-08 16:39 +0000 [254d07b15b]  Matt Jordan <mjordan@digium.com>

	* ARI: Add support for push configuration of dynamic object

	  This patch adds support for push configuration of dynamic, i.e.,
	  sorcery, objects in Asterisk. It adds three new REST API calls to the
	  'asterisk' resource:
	   * GET /asterisk/{configClass}/{objectType}/{id}: retrieve the current
	     object given its ID. This returns back a list of ConfigTuples, which
	     define the fields and their present values that make up the object.
	   * PUT /asterisk/{configClass}/{objectType}/{id}: create or update an
	     object. A body may be passed with the request that contains fields to
	     populate in the object. The same format as what is retrieved using
	     the GET operation is used for the body, save that we specify that the
	     list of fields to update are contained in the "fields" attribute.
	   * DELETE /asterisk/{configClass}/{objectType}/{id}: remove a dynamic
	     object from its backing storage.

	  Note that the success/failure of these operations is somewhat
	  configuration dependent, i.e., you must be using a sorcery wizard that
	  supports the operation in question. If a sorcery wizard does not support
	  the create or delete mechanisms, then the REST API call will fail with a
	  403 forbidden.

	  ASTERISK-25238 #close

	  Change-Id: I28cd5c7bf6f67f8e9e437ff097f8fd171d30ff5c

2015-07-15 15:40 +0000 [b34c4528ab]  Richard Mudgett <rmudgett@digium.com>

	* strings.h: Fix issues with escape string functions.

	  Fixes for issues with the ASTERISK-24934 patch.

	  * Fixed ast_escape_alloc() and ast_escape_c_alloc() if the s parameter is
	  an empty string.  If it were an empty string the functions returned NULL
	  as if there were a memory allocation failure.  This failure caused the AMI
	  VarSet event to not get posted if the new value was an empty string.

	  * Fixed dest buffer overwrite potential in ast_escape() and
	  ast_escape_c().  If the dest buffer size is smaller than the space needed
	  by the escaped s parameter string then the dest buffer would be written
	  beyond the end by the nul string terminator.  The num parameter was really
	  the dest buffer size parameter so I renamed it to size.

	  * Made nul terminate the dest buffer if the source string parameter s was
	  an empty string in ast_escape() and ast_escape_c().

	  * Updated ast_escape() and ast_escape_c() doxygen function description
	  comments to reflect reality.

	  * Added some more unit test cases to /main/strings/escape to cover the
	  empty source string issues.

	  ASTERISK-25255 #close
	  Reported by: Richard Mudgett

	  Change-Id: Id77fc704600ebcce81615c1200296f74de254104

2015-07-14 14:29 +0000 [097c15ac51]  Richard Mudgett <rmudgett@digium.com>

	* parking_applications.c: Fix ast_verb() line terminator.

	  Change-Id: I8797238c71563e243c48c6145b4f1ae58f91f775

2015-07-14 14:36 +0000 [8b620c555b]  Richard Mudgett <rmudgett@digium.com>

	* res_parking: Fix crash if ATTENDEDTRANSFER set empty before Park.

	  setup_park_common_datastore() was assuming that a non-NULL string returned
	  for the ATTENDEDTRANSFER and BLINDTRANSFER channel variables are not empty
	  strings.  Things got crashy as a result.

	  * Made setup_park_common_datastore() treat the channel variable values the
	  same whether they are NULL or empty for ATTENDEDTRANSFER and
	  BLINDTRANSFER.

	  ASTERISK-25254 #close
	  Reported by: Richard Mudgett

	  Change-Id: I9a9c174b33f354f35f82cc6b7cea8303adbaf9c2

2015-07-10 18:01 +0000 [4af24ec74b]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Extract sip_session_defer_termination_stop_timer().

	  Change-Id: I9e115dee74bd72e06081d0ee73ecdeb886caa5fb

2015-07-10 10:42 +0000 [71b3bcf5e0]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Add some helpful comments and minor tweaks.

	  Change-Id: I742aeeaf5f760593f323a00fb691affe22e35743

2015-07-10 10:43 +0000 [53c91737a5]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Fix off nominal crash potential in debug message.

	  Change-Id: I09928297927ee85f7655289acee3a586816466bc

2015-07-15 10:31 +0000 [eff6a88a88]  Matt Jordan <mjordan@digium.com>

	* apps/app_dictate: Fix typo in attribution

	  Last time I checked, it's "Sangoma", not "Samgoma". Thanks to Brian
	  (GameGamer43) for pointing that out.

	  Change-Id: I43d7b196f6d7a2b2517b84915e3a8dfbc2894106

2015-07-15 10:28 +0000 [e01d93e092]  Benjamin Ford <bford@digium.com>

	* ARI: Fixed unload mode for unload module.

	  Changed the unload mode to AST_FORCE_SOFT from AST_FORCE_FIRM,
	  which would unload a module even if it was in use.

	  * Changed unload mode to proper mode

	  ASTERISK-25173

	  Change-Id: If2402487b5bce05d9770f25f65f5c8e292ad5533

2015-07-10 18:17 +0000 [1b666549f3]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session.c: Fix crash on call disconnect.

	  The crash fix for ASTERISK-25183 backported some code from master to try
	  to make sure that a BYE response is processed by the same serializer used
	  by the BYE request.  The identified race condition causing that backport
	  was the BYE request code had not finished processing after sending the BYE
	  before the BYE response came in for processing under a different thread.
	  Unfortunately, there is still a race condition.  Now the race condition is
	  between destroying the call session's serializer in
	  ast_taskprocessor_unreference() and using ast_taskprocessor_get() to get a
	  reference to the serializer for a BYE response.  Even worse, the new race
	  condition is a design limitation of the taskprocessor implementation that
	  didn't matter in versions before v12.  Back then, taskprocessors were only
	  destroyed when a module unloaded.  Now res_pjsip can destroy them when a
	  call ends.

	  However, as noted on the ASTERISK-25183 commit,
	  session_inv_on_state_changed() is disassociating the dialog from the
	  session when the invite dialog state becomes PJSIP_INV_STATE_DISCONNECTED.
	  This is a tad too soon because our BYE request transaction has not
	  completed yet.

	  * Split session_end() that is called by session_inv_on_state_changed() to
	  hold off session destruction until the BYE transaction timeout occurs or a
	  failed initial INVITE transaction timeout occurs in
	  session_inv_on_tsx_state_changed().

	  ASTERISK-25201 #close
	  Reported by: Matt Jordan

	  Change-Id: Iaf8dc8485fd8392a2a3ee4ad3b7f7f04a0dcc961

2015-07-14 13:12 +0000 [9d458b8311]  Benjamin Ford <bford@digium.com>

	* ARI: Added new functionality to reload a single module.

	  An http request can be sent to reload an Asterisk module. If the
	  module can not be reloaded or is not already loaded, an error
	  response will be returned.

	  The command "curl -v -u user:pass -X PUT 'http://localhost:8088
	  /ari/asterisk/modules/{moduleName}'" (or something similar, based
	  on configuration) can be run in the terminal to access this new
	  functionality.

	  For more information, see:
	  https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource

	  * Added new ARI functionality
	  * Asterisk modules can be reloaded through http requests

	  ASTERISK-25173

	  Change-Id: I289188bcae182b2083bdbd9ebfffd50b62f58ae1

2015-07-14 08:55 +0000 [f64f1c2772]  Benjamin Ford <bford@digium.com>

	* ARI: Added new functionality to unload a single module.

	  An http request can be sent to unload an Asterisk module. If the
	  module can not be unloaded or is already unloaded, an error response
	  will be returned.

	  The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
	  /ari/asterisk/modules/{moduleName}'" (or something similar, depending
	  on configuration) can be run in the terminal to access this new
	  functionality.

	  For more information, see:
	  https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource

	  * Added new ARI functionality
	  * Asterisk modules can be unloaded through http requests

	  ASTERISK-25173

	  Change-Id: I535a95f5676deb02651522761ecbdc0b00b5ac57

2015-07-13 16:00 +0000 [aa5707b889]  Benjamin Ford <bford@digium.com>

	* ARI: Added new functionality to load a single module.

	  An http request can be sent to load an Asterisk module. If the
	  module can not be loaded or is loaded already, an error response
	  will be returned.

	  The command curl -v -u user:pass -X POST 'http://localhost:8088/ari
	  /asterisk/modules/{moduleName}'" (or something similar, depending on
	  configuration) can be run in the terminal to access this new
	  functionality.

	  For more information, see:
	  https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource

	  * Added new ARI functionality
	  * Asterisk modules can be loaded through http requests

	  ASTERISK-25173

	  Change-Id: I9e05d5b8c5c666ecfef341504f9edc1aa84fda33

2015-07-13 10:54 +0000 [6a764db370]  Benjamin Ford <bford@digium.com>

	* ARI: Added new functionality to get information on a single module.

	  An http request can be sent to retrieve information on a single
	  module, including the resource name, description, use count, status,
	  and support level.

	  The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
	  /asterisk/modules/{moduleName}'" (or something similar, depending on
	  configuration) can be run in the terminal to access this new
	  functionality.

	  For more information, see:
	  https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource

	  * Added new ARI functionality
	  * Information on a single module can now be retrieved

	  ASTERISK-25173

	  Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463

2015-07-08 14:56 +0000 [c855523519]  Kevin Harwell <kharwell@digium.com>

	* bridge.c: Fixed race condition during attended transfer

	  During an attended transfer a thread is started that handles imparting the
	  bridge channel. From the start of the thread to when the bridge channel is
	  ready exists a gap that can potentially cause problems (for instance, the
	  channel being swapped is hung up before the replacement channel enters the
	  bridge thus stopping the transfer). This patch adds a condition that waits
	  for the impart thread to get to a point of acceptable readiness before
	  allowing the initiating thread to continue.

	  ASTERISK-24782
	  Reported by: John Bigelow

	  Change-Id: I08fe33a2560da924e676df55b181e46fca604577

2015-05-13 16:22 +0000 [ef82190804]  Matt Jordan <mjordan@digium.com>

	* media cache: Add CLI commands

	  This patch adds five CLI commands for the media cache:
	   * 'media cache show all' - display a summary of all items in the media
	     cache.
	   * 'media cache show <uri>' - display detailed information about a
	     single item in the media cache.
	   * 'media cache delete <uri>' - remove an item from the media cache, and
	     inform the bucket backend for the URI scheme to remove the item as
	     well.
	   * 'media cache refresh <uri>' - refresh a URI. If the item does not
	     exist in the media cache, the bucket backend will pull down the media
	     associated with the URI and create the item in the cache.
	   * 'media cache create <uri>' - create an item in the media cache from
	     some local media storage. Note that the bucket backend for the URI
	     scheme must still permit the item creation.

	  Change-Id: Id1c5707a3b8e2d96b56e4691a46a936cd171f4ae

2015-01-29 08:38 +0000 [3ea0d38396]  Matt Jordan <mjordan@digium.com>

	* media cache: Add a core API and facade for a backend agnostic media cache

	  This patch adds a new API to the Asterisk core that acts as a media
	  cache. The core API itself is mostly a thin wrapper around some bucket
	  API provided implementation that itself acts as the mechanism of
	  retrieval for media. The media cache API in the core provides the
	  following:
	   * A very thin in-memory cache of the active bucket_file items. Unlike a
	     more traditional cache, it provides no expiration mechanisms. Most
	     queries that hit the in-memory cache will also call into the bucket
	     implementations as well. The bucket implementations are responsible
	     for determining whether or not the active record is active and valid.
	     This makes sense for the most likely implementation of a media cache
	     backend, i.e., HTTP. The HTTP layer itself is the actual arbiter of
	     whether or not a record is truly active; as such, the in-memory cache
	     in the core has to defer to it.
	   * The ability to create new items in the media cache from local
	     resources. This allows for re-creation of items in the cache on
	     restart.
	   * Synchronization of items in the media cache to the AstDB. This
	     also includes various pieces of important metadata.

	  The API provides sufficient access that higher level APIs, such as the
	  file or app APIs, do not have to worry about the semantics of the bucket
	  APIs when needing to playback a resource.

	  In addition, this patch provides unit tests for the media cache API. The
	  unit tests use a fake bucket backend to verify correctness.

	  Change-Id: I11227abbf14d8929eeb140ddd101dd5c3820391e

2015-07-11 20:25 +0000 [887945d410]  Matt Jordan <mjordan@digium.com>

	* main/bucket: Add a callback function for ast_bucket_file objects

	  This patch adds a new function to the bucket API for ast_bucket_file
	  objects, ast_bucket_file_metadata_callback. It will call ao2_callback on
	  the ast_bucket_file's ao2_container of metadata, calling the provided
	  ao2_callback_fn callback on each piece of metadata associated with the
	  file.

	  This is particularly useful when a bucket backend has added metadata,
	  and a higher level API wants to be aware of/access said metadata,
	  without knowing for sure what the key is.

	  Change-Id: I96f6757717f47b650df91a437f7df16406227466

2015-07-08 16:28 +0000 [458715d088]  Matt Jordan <mjordan@digium.com>

	* main/sorcery: Don't fail object set creation from JSON if field fails

	  Some individual fields may fail their conversion due to their default
	  values being invalid for their custom handlers. In particular,
	  configuration values that depend on others being enabled (and thus have
	  an empty default value) are notorious for tripping this routine up. An
	  example of this are any of the DTLS options for endpoints. Any of the
	  DTLS options will fail to be applied (as DTLS is not enabled), causing
	  the entire object set to be aborted.

	  This patch makes it so that we log a debug message when skipping a
	  field, and rumble on anyway.

	  ASTERISK-25238

	  Change-Id: I0bea13de79f66bf9f9ae6ece0e94a2dc1c026a76

2015-07-08 16:21 +0000 [6ed58014f5]  Matt Jordan <mjordan@digium.com>

	* main/format_cap: Parse capabilities generated by ast_format_cap_get_names

	  We have a strange relationship between the parsing of format
	  capabilities from a string and their representation as a string. We
	  expect the format capabilities to be expressed as a string in the
	  following format:

	  allow = !all,ulaw,alaw
	  disallow = g722

	  While we would generate the string representation of those formats as:

	  allow = (ulaw|alaw)
	  disallow = (ulaw|alaw|g729...)

	  When the configuration framework needs to store values as a string, it
	  generates the format capabilities using the second representation; this
	  representation however cannot be parsed when the entry is rehydrated.
	  This patch fixes that by updating
	  ast_format_cap_update_by_allow_disallow to parse an entry as if it were
	  in the generated format if it has a leading '(' and a trailing ')'.

	  ASTERISK-25238

	  Change-Id: I904d43caf4cf45af06f6aee0c9e58556eb91d6ca

2015-07-08 16:38 +0000 [e64e586900]  Matt Jordan <mjordan@digium.com>

	* res/res_sorcery_astdb: Add a debugging message for when retrieval by ID fails

	  Having a debug message tell us that we attempted to look up an item but
	  failed is nice in circumstances when it isn't clear if the wizard was
	  queried correctly or not.

	  Change-Id: I2600c3bbea87f252196358f62e73f4c7da8632f7

2015-07-08 16:37 +0000 [7c14dfdc61]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_outbound_registration: Fix WARNING message

	  Newlines are nice.

	  Change-Id: Icf0d915db02882e47cd9077ed9009f5d44140d42

2015-07-08 16:35 +0000 [3e286e6b51]  Matt Jordan <mjordan@digium.com>

	* res_pjsip/configuration: Fix a variety of default value problems

	  This patch fixes some bad default value handling in the following
	  settings:

	  * The 'message_context' and 'accountcode' settings are not mandatory. As
	    such, we can allow their stringfield values to be empty.
	  * The 'media_encryption' setting applies a default value of 'none' to
	    the setting, which it then can't parse or understand. Since the value
	    is documented to be 'no', this will now apply that as the default
	    value.

	  Change-Id: Ib9be7f97a7a5b9bc7aee868edf5acf38774cff83

2015-07-08 16:32 +0000 [ffadb5f1de]  Matt Jordan <mjordan@digium.com>

	* main/sorcery: Provide log messages when a wizard does not support an operation

	  If a sorcery wizard does not support one of the 'optional' CRUD
	  operations (namely the CUD), log a WARNING message so we are aware of
	  why the operation failed. This also removes an assert in this case, as
	  the CUD operation may have been triggered by an external system, in
	  which case it is not a programming error but a configuration error.

	  Change-Id: Ifecd9df946d9deaa86235257b49c6e5e24423b53

2015-06-27 17:53 +0000 [5266796432]  Matt Jordan <mjordan@digium.com>

	* tests/test_devicestate: Add additional tests for the device state API

	  This patch adds more tests that exercise the device state API. This includes:

	  * Tests that cover adding a device state provider, as well as deleting a
	    device state provider. This also verifies that you cannot add an
	    already added device state provider, and cannot delete an already
	    deleted device state provider.
	  * A test that covers changing device state and receiving said updates
	    from a device state subscriber. This also covers hitting both the
	    device state cache as well as a custom device state provider.
	  * A test that covers converting device state to channel state and device
	    state values to a string representation and back.
	  * A test that covers obtaining device state from an active channel and a
	    channel driver that provides its own device state.

	  Change-Id: I2adca67ffb405cd8625a5d6df1e3f9b3d945c08d

2015-06-27 17:51 +0000 [f77e688f20]  Matt Jordan <mjordan@digium.com>

	* main/devicestate: Prevent duplicate registration of device state providers

	  Currently, the device state provider API will allow you to register a
	  device state provider with the same case insensitive name more than
	  once. This could cause strange issues, as the duplicate device state
	  providers will not be queried when a device's state has to be polled.
	  This patch updates the API such that a device state provider with the
	  same name as one that has already registered will be rejected.

	  Change-Id: I4a418a12280b7b6e4960bd44f302e27cd036ceb2

2015-06-26 10:57 +0000 [1b7760a8aa]  Benjamin Ford <bford@digium.com>

	* ARI: Added new functionality to get all module information.

	  An http request can be sent to retrieve a list of all existing modules,
	  including the resource name, description, use count, status, and
	  support level.

	  The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
	  asterisk/modules" (or something similar, depending on configuration)
	  can be run in the terminal to access this new functionality.

	  For more information, see:
	  https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource

	  * Added new ARI functionality
	  * Information on modules can now be retrieved

	  Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0

2015-07-09 09:18 +0000 [4a25d55416]  Joshua Colp <jcolp@digium.com>

	* bridge_native_rtp.c: Don't start native RTP bridging after attended transfer.

	  The bridge_native_rtp module adds a frame hook to channels which are in
	  a native RTP bridge. This frame hook is used to intercept when a hold
	  or unhold frame traverses the bridge so native RTP can be stopped or
	  started as appropriate. This is expected but exposes a specific bug
	  when attended transfers are involved.

	  Upon completion of an attended transfer an unhold frame is queued up
	  to take one of the channels involved off hold. After this is done
	  the channel is moved between bridges.

	  When the frame hook is involved in this case for the unhold it
	  releases the channel lock and acquires the bridge lock. This
	  allows the bridge core to step in and move the channel
	  (potentially changing the bridging techology) from another thread.
	  Once completed the bridge lock is released by the bridge core.
	  The frame hook is then able to acquire the bridge lock and
	  wrongfully starts native RTP again, despite the channel no longer
	  being in the bridge or needing to start native RTP. In fact at
	  this point the frame hook is no longer attached to the channel.

	  This change makes it so the native RTP bridge data is available to
	  the frame hook when it is invoked. Whether the frame hook has
	  been detached or not is stored on the native RTP bridge data and
	  is checked by the frame hook before starting or stopping native
	  RTP bridging. If the frame hook has been detached it does nothing.

	  ASTERISK-25240 #close

	  Change-Id: I13a73186a05f4e5a764f81e5cd0ccec1ed1891d2

2015-07-08 04:21 +0000 [9276415f65]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Ensure DTLS timeout timer is -1 if DTLS is not used.

	  This change fixes a bug where the DTLS timeout timer would be
	  initialized to 0 if DTLS was not used for an RTP session.

	  ASTERISK-25103

	  Change-Id: If8d26bb054f1d300838850da5b8db9044c2fe2ac

2015-07-07 15:03 +0000 [3cdfd39af7]  Ashley Sanders <asanders@digium.com>

	* DNS: Create a system-level DNS resolver

	  Prior to this patch, the DNS core present in master had no default system-level
	  resolver implementation. Therefore, it was not possible for the DNS core to
	  perform resolutions unless the libunbound library was installed and the
	  res_resolver_unbound module was loaded.

	  This patch introduces a system-level DNS resolver implementation that will
	  register itself with the lowest consideration priority available (to ensure
	  that it is to be used only as a last resort). The resolver relies on low-level
	  DNS search functions to perform a rudimentary DNS search based on a provided
	  query and then supplies the search results to the DNS core.

	  ASTERISK-25146 #close
	  Reported By: Joshua Colp

	  Change-Id: I3b36ea17b889a98df4f8d80d50bb7ee175afa077

2015-07-01 07:55 +0000 [5717340ab3]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Prevent simultaneous access to DTLS SSL context.

	  This change moves logic for setting up the DTLS SSL contexts to
	  when the SDP is done being processed instead of when ICE negotiation
	  completes. It also stops handshakes from being initiated when we
	  are acting as a server.

	  Manipulating the SSL context when ICE negotiation has completed
	  is problematic as the SSL context is not protected and if acting
	  as a client the remote side may have started DTLS negotiation
	  already.

	  The retransmission timeout timer code has also been split up
	  and simplified some. Both RTP and RTCP now have their own timers
	  and the points at which the timer is stopped and started is now
	  more specific. When a packet is sent the timer is started. When
	  a response is received but before it is processed the timer is
	  stopped. This provides a guarantee that the timeout is not
	  occurring while the response is processed.

	  ASTERISK-22805 #close
	  ASTERISK-24550 #close
	  ASTERISK-24651 #close
	  ASTERISK-24832 #close
	  ASTERISK-25103 #close
	  ASTERISK-25127 #close

	  Change-Id: Ib75ea2546f29d6efc3d2d37c58df6986c7bd9b91

2015-06-26 18:48 +0000 [189841ddb7]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_mwi.c: Fix MWI subscription memory corruption crash.

	  MWI subscriptions can crash or corrupt memory when using the subscription
	  datastore to access the MWI subscription object because the datastore is
	  not holding a reference to the object.

	  * Give the subscription datastore a ref to the MWI subscription object.
	  It is unfortunate that the ref causes a circular ref chain that must be
	  explicitly broken to allow the memory to get released.  The loop is broken
	  when the subscription is shutdown and if the subscription setup fails.

	  ASTERISK-25168 #close
	  Reported by: Carl Fortin

	  Change-Id: Ice4fa823f138ff10a6c74d280699c41a82836d4f

2015-07-02 14:51 +0000 [7cd99be534]  Richard Mudgett <rmudgett@digium.com>

	* PJSIP XML, XPIDF: Fix buffer size overwrite memory corruption error.

	  When res_pjsip body generator modules were generating XML or XPIDF
	  response bodies, there was a chance that the generated body would be the
	  exact size of the supplied buffer.  Adding the nul string terminator would
	  then write beyond the end of the buffer and potentially corrupt memory.

	  * Fix MALLOC_DEBUG high fence violations caused by adding a nul string
	  terminator on the end of a buffer for XML or XPIDF response bodies.

	  * Made calls to pj_xml_print() safer if the XML prolog is requested.  Due
	  to a bug in pjproject, the return value could be -1 _or_
	  AST_PJSIP_XML_PROLOG_LEN if the supplied buffer is not large enough.

	  * Updated the doxygen comment of AST_PJSIP_XML_PROLOG_LEN to describe the
	  return value of pj_xml_print() when the supplied buffer is not large
	  enough.

	  ASTERISK-25168
	  Reported by: Carl Fortin

	  Change-Id: Id70e1d373a6a2b2bd9e678b5cbc5e55b308981de

2015-06-26 10:36 +0000 [792ed7ce93]  Richard Mudgett <rmudgett@digium.com>

	* PJSIP FAX: Fix T.38 automatic reject timer NULL channel pointer dereferences.

	  When a caller calls a FAX number and then hangs up right after the call is
	  answered then the T.38 re-INVITE automatic reject timer may still be
	  running after the channel goes away.

	  * Added session NULL channel checks on the code paths that get executed by
	  t38_automatic_reject() to prevent a crash when the T.38 re-INVITE
	  automatic reject timer expires.

	  ASTERISK-25168
	  Reported by: Carl Fortin

	  Change-Id: I07b6cd23815aedce5044f8f32543779e2f7a2403

2015-06-30 11:17 +0000 [030e8339dd]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_mwi.c: Use safer loop coding in mwi_subscription_mailboxes_str().

	  Change-Id: I6f39d809a6d1b47b35bb32b298f5a12f35d6f907

2015-06-30 11:14 +0000 [453d7b8d69]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_mwi.c: Eliminate a simple RAII_VAR.

	  Change-Id: Ib1843f81e826a6c760c424c88eb70c350d9d61da

2015-06-30 11:11 +0000 [786c6d42ef]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_mwi.c: Fix mid-line log message line breaks.

	  * Add create_mwi_subscriptions_for_endpoint() doxygen comment.

	  Change-Id: I3c3f921f4ec749fb65b62d2f6fa0d4d1888b94e2

2015-06-26 16:10 +0000 [1b91094edd]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_t38.c: Fix always false if test.

	  Calling t38_change_state() sets the t38 state so it makes little sense to
	  then check the state right after the call for something else.

	  * Made the code in t38_interpret_parameters() reject or exit T.38 mode as
	  intended but not implemented.

	  Change-Id: Ib281263a6ed44da9448132c4e6df1e183b8a3df2

2015-06-30 15:19 +0000 [74135c8efa]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: Failover when server is not available

	  Previously Asterisk did not properly failover to the next resolved DNS
	  address when a endpoint could not be reached. With this patch, and while
	  using res_pjsip, SIP requests (both in/out of dialog) now attempt to use
	  the next address in the list of resolved addresses until a proper response
	  is received or no more addresses are left.

	  ASTERISK-25076 #close
	  Reported by: Joshua Colp

	  Change-Id: Ief14f4ebd82474881f72f4538f4577f30af2a764

2015-07-06 09:24 +0000 [38a3c27a09]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_memory_cache: Execute stale unit test last.

	  In Jenkins there is currently a sporadic test failure of a
	  variable number of sorcery memory cache unit tests. I have not
	  been able to reproduce this on the build agents themselves or
	  on my development machine.

	  My working theory is that the stale unit test is causing a
	  sorcery instance to persist longer than expected, causing subsequent
	  tests to fail when setting up and initializing the next
	  sorcery instance.

	  To see if this is the case this change moves the stale unit test
	  to execute last so no subsequent unit tests can have issues
	  initializing their sorcery instance.

	  Change-Id: Ifd6550a949613be774b75fa5db12c02110f82c4a

2015-06-20 13:54 +0000 [ef8d3f6506]  Matt Jordan <mjordan@digium.com>

	* bucket: Add clone/staleness operations for ast_bucket/ast_bucket_file

	  This patch enhances the bucket API in two ways.

	  First, since ast_bucket and ast_bucket_file instances are immutable, a 'clone'
	  operation has been added that provides a 'clone' of an existing
	  ast_bucket/ast_bucket_file object. Note that this makes use of the
	  ast_sorcery_copy operation, along with the copy callback handler on the
	  "bucket" and "file" object types for the bucket sorcery instance.

	  Second, there is a need for the bucket API to ask a wizard if an object
	  is stale. This is particularly useful with the upcoming media cache
	  enhancements, where we want to ask the backing data storage if the
	  object we are currently operating on has known updates. This patch adds
	  API calls for ast_bucket and ast_bucket_file objects, which callback
	  into their respective sorcery wizards via the sorcery API.

	  Unit tests have also been added to cover the respective
	  ast_bucket/ast_bucket_file clone and staleness operations.

	  Change-Id: Ib0240ba915ece313f1678a085a716021d75d6b4a

2015-07-04 10:03 +0000 [b178f8701b]  Matt Jordan <mjordan@digium.com>

	* sorcery: Add support for object staleness

	  This patch enhances the sorcery API to allow for sorcery wizards to
	  determine if an object is stale. This includes the following:

	  * Sorcery objects now have a timestamp that is set on creation. Since
	    sorcery objects are immutable, this can be used by sorcery wizards to
	    determine if an object is stale.

	  * A new API call has been added, ast_sorcery_is_stale. This API call
	    queries the wizards associated with the object, calling a new callback
	    function 'is_stale'. Note that if a wizard does not support the new
	    callback, objects are always assumed to not be stale.

	  * Unit tests have been added that cover the new API call.

	  Change-Id: Ica93c6a4e8a06c0376ea43e00cf702920b806064

2015-07-04 18:22 +0000 [f35a4b8525]  Joshua Colp <jcolp@digium.com>

	* res/res_http_websocket: Don't send HTTP response fragmented.

	  This change makes it so that when accepting a WebSocket
	  connection the HTTP response is sent as one packet instead of
	  fragmented. Browsers don't like it when you send it fragmented.

	  ASTERISK-25103

	  Change-Id: I9b82c4ec2949b0bce692ad0bf6f7cea9709e7f69

2015-06-27 18:47 +0000 [2c17515f3c]  Matt Jordan <mjordan@digium.com>

	* Makefile: Remove coverage files on 'make clean'

	  This patch updates a variety of Makefiles in Asterisk's build system to
	  remove .gcda and .gcno files when 'make clean' is executed. These files
	  are generated when '--enable-coverage' is passed to the Asterisk
	  configure script.

	  Change-Id: Ib70b41eea2ee2908885bff02e80faf9f40c84602

2015-07-02 09:08 +0000 [34323f9f95]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Fix early call pickup channel leak.

	  When handle_invite_replaces() was called, and either ast_bridge_impart()
	  failed or there was no bridge (because the channel we're picking up was
	  still ringing), chan_sip would leak a channel.

	  Thanks Matt and Corey for checking the bridge path.

	  ASTERISK-25226 #close

	  Change-Id: Ie736bb182170a73eef5bcef0ab0376f645c260c8

2015-07-01 16:04 +0000 [ef74ccb18d]  Matt Jordan <mjordan@digium.com>

	* sorcery/realtime: Add a bit of debug and warning messages for bad configs

	  When a mapping does not exist between a sorcery.conf defined object and
	  a realtime mapping in extconf, currently, the user will receive a slew
	  of ERROR messages that don't really tell what is happening. Some ERROR
	  messages may even be misleading, as they occur after the sorcery API has
	  already given up on the attempt to load and create the sorcery object.

	  This patch adds a bit of debug and a useful WARNING message for when a
	  wizard's open callback fails for a particular object type. In the bad
	  configurations that resulted in this patch, this provided a 'root cause'
	  WARNING message that pointed in the right direction of the configuration
	  problem.

	  Change-Id: I1cc7344f2b015b8b9c85a7e6ebc8cb4753a8f80b

2015-07-02 06:54 +0000 [f18436642b]  Joshua Colp <jcolp@digium.com>

	* dns: Fix crash when invoking cancel in DNS recurring unit test.

	  The recurring unit test expects the user data on a DNS query
	  created as a result of a recurring DNS query to be the recurring
	  structure itself. This is true, mostly. When invoking the user
	  provided callback this user data is changed to the user provided
	  data. This presents a race condition where the data may or may
	  not point to the recurring data.

	  This change simplifies the callback of the user provided callback
	  by creating a new query and populating it with the expected values.
	  This leaves the recurring DNS query alone and fixes the race
	  condition. This is more in line with how the API should be used
	  overall.

	  ASTERISK-25222 #close

	  Change-Id: I10fb6deec025dff097157e7ec17e6e4921778478

2015-07-02 06:19 +0000 [6fbb58c7f7]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_mgcp: Don't call close on fd -1.

	  ASTERISK-25220 #close

	  Change-Id: Ic48f3a82f51ada87f2fb0e016c9efe0ad56f1ee3

2015-07-02 06:10 +0000 [13a318bbb1]  Walter Doekes <walter+asterisk@wjd.nu>

	* rtp_engine: Skip useless self-assignment in ast_rtp_engine_unload_format.

	  When running valgrind on Asterisk, it complained about:

	      ==32423== Source and destination overlap in memcpy(0x85a920, 0x85a920, 304)
	      ==32423==    at 0x4C2F71C: memcpy@@GLIBC_2.14 (in /usr/lib/valgrind/...)
	      ==32423==    by 0x55BA91: ast_rtp_engine_unload_format (rtp_engine.c:2292)
	      ==32423==    by 0x4EEFB7: ast_format_attr_unreg_interface (format.c:1437)

	  The code in question is a struct assignment, which may be performed by
	  memcpy as a compiler optimization. It is changed to only copy the struct
	  contents if source and destination are different.

	  ASTERISK-25219 #close

	  Change-Id: I6d3546c326b03378ca8e9b8cefd41c16e0088b9a

2015-07-02 05:16 +0000 [40274e3652]  Walter Doekes <walter+asterisk@wjd.nu>

	* astfd: Fix buffer overflow in DEBUG_FD_LEAKS.

	  If DEBUG_FD_LEAKS was used and more file descriptors than the default of
	  1024 were available, some DEBUG_FD_LEAKS-patched functions would
	  overwrite memory past the fixed-size (1024) fdleaks buffer.

	  This change:
	  - adds bounds checks to __ast_fdleak_fopen and __ast_fdleak_pipe
	  - consistently uses ARRAY_LEN() instead of sizeof() or 1023 or 1024
	  - stores pointers to constants instead of copying the contents
	  - reorders the fdleaks struct for possibly tighter packing
	  - adds a tiny bit of documentation

	  ASTERISK-25212 #close

	  Change-Id: Iacb69e7701c0f0a113786bd946cea5b6335a85e5

2015-07-02 04:57 +0000 [3fab8212e3]  Walter Doekes <walter+asterisk@wjd.nu>

	* res_timing: Don't close FD 0 when out of open files.

	  This fixes so a failure to get a timer file descriptor does not cascade
	  to closing FD 0.

	  On error, both res_timing_kqueue and res_timing_timerfd would call the
	  destructor before setting the file handle. The file handle had been
	  initialized to 0, causing FD 0 to be closed. This in turn, resulted in
	  floods of "CLI>" messages and an unusable terminal.

	  ASTERISK-19277 #close
	  Reported by: Barry Chern

	  For the master branch, this was already fixed. This patch only ensures
	  that we do not attempt to close a negative file descriptor.

	  Change-Id: I147d7e33726c6e5a2751928d56561494f5800350

2015-07-01 17:25 +0000 [41610df8d5]  Richard Mudgett <rmudgett@digium.com>

	* chan_vpb.cc: Fix compiler warning Jenkins found.

	  Change-Id: I0ec7fd10d56d90d5a60b12b5a7d6807f265ac5e0

2015-07-01 13:34 +0000 [537df26f9c]  Scott Griepentrog <scott@griepentrog.com>

	* Channel alert pipe: improve diagnostic error return

	  When a frame is queued on a channel, any failure in
	  ast_channel_alert_write is logged along with errno.

	  This change improves the diagnostic message through
	  aligning the errno value with actual failure cases.

	  ASTERISK-25224
	  Reported by: Andrey Biglari

	  Change-Id: I1bf7b3337ad392789a9f02c650589cd065d20b5b

2015-06-29 12:45 +0000 [58d18324f0]  Mark Michelson <mmichelson@digium.com>

	* res_sorcery_realtime: Fix leak of sorcery object type.

	  This prevents a leak of a sorcery object type when realtime sorcery
	  objects are retrieved by fields or when multiple objects are retrieved.

	  The extent of this leak is that sorcery object types would be leaked.
	  These are allocated whenever an object type is registered with sorcery,
	  meaning that on module shutdown, these objects would be leaked. This
	  could be problematic if many reloads were performed, but it is not as
	  severe as if every sorcery object retrieved from realtime were being
	  leaked.

	  ASTERISK-25165 #close
	  Reported by Corey Farrell

	  Change-Id: I625c3b50eee4576670b7eeb013c81ad043b4b4f8
2015-06-26 22:02 +0000 [80d97290bb]  Matt Jordan <mjordan@digium.com>

	* res/res_corosync: Always decline module load, instead of failing

	  Returns a 'failure' from the module load routine indicates to Asterisk
	  that it should abort loading completely. This is rarely - in fact,
	  really, never - a good option. Aborting load of Asterisk from a dynamic
	  module implies that the core, and the rest of the dynamic modules, don't
	  matter: we should abandon all processing.

	  res_corosync is really not that important.

	  This patch updates the module such that, if it fails to load, it
	  politely declines (emitting ERROR messages along the way), and allows
	  Asterisk to continue to function.

	  Note that this issue was keeping Asterisk unit tests from running on
	  certain build agents.

	  Change-Id: I252249e81fb9b1a68e0da873f54f47e21d648f0f

2015-06-26 20:38 +0000 [892cc5625f]  Matt Jordan <mjordan@digium.com>

	* main/pbx: Resolve case sensitivity regression in PBX hints

	  When 8297136f was merged for ASTERISK-25040, a regression was introduced
	  surrounding the case sensitivity of device names within hints.
	  Previously, device names - such as 'sip/foo' - were compared in a case
	  insensitive fashion. Thus, 'sip/foo' was equivalent to 'SIP/foo'. After
	  that patch, only the case sensitive name would match, i.e., 'SIP/foo'.
	  As a result, some dialplan hints stopped working.

	  This patch re-introduces case insensitive matching for device names in
	  hints.

	  ASTERISK-25040

	  ASTERISK-25202 #close

	  Change-Id: If5046a7d14097e1e3c12b63092b9584bb1e9cb4c
	  (cherry picked from commit 96bbcf495a1da9e607d9b04a44b5c4f49e83cc03)

2015-06-26 16:12 +0000 [e18b22a806]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_nat: Adjust when contact should be rewritten.

	  A previous change made the contact only get rewritten if the dialog's
	  route set was not marked frozen. Unfortunately, while the intent of this
	  is correct, the dialog's route set actually gets marked as frozen
	  earlier than expected, especially for UAS dialogs.

	  Instead, the idea is that the contact needs to not be rewritten if there
	  is a pre-existing route set on the dialog. This is now accomplished by
	  checking the dialog's route set list instead of checking if the route
	  set is frozen.

	  Doing this causes some broken tests to begin passing again.

	  ASTERISK-25196
	  Reported by Mark Michelson

	  Change-Id: I525ab251fd40a52ede327a52a2810a56deb0529e

2015-06-19 18:27 +0000 [99b1aa6d26]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Add a serializer shutdown group.

	  The client_state objects contain a serializer used to send the outbound
	  REGISTER messages.  Once all those message transactions are complete then
	  the module can shutdown.

	  ASTERISK-24907 #close
	  Reported by: Kevin Harwell

	  Change-Id: Ibb2fe558f98190f2a06da830e0fadfa25516f547

2015-06-26 10:41 +0000 [f536e9b59c]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_refer: Prevent sending duplicate headers.

	  res_pjsip_refer will attempt to add Referred-By or Replaces headers to
	  outbound INVITEs at times. If the INVITE gets challenged for
	  authentication, then we will resend the INVITE. Prior to this patch, the
	  Referred-By or Replaces header would be re-added to the outbound INVITE,
	  resulting in duplicated headers.

	  ASTERISK-25204 #close
	  Reported by Mark Michelson

	  Change-Id: I59fb5c08b4d253c0dba9ee3d3950b5025358222d

2015-06-23 14:34 +0000 [c2d48a2a28]  Richard Mudgett <rmudgett@digium.com>

	* AMI: Add Linkedid to the standard channel snapshot AMI event headers.

	  ASTERISK-25189 #close
	  Reported by: John Hardin

	  Change-Id: I2b1778c3fdc1dca0ed55db4e3a639eddfb16c2ac
2015-06-23 17:43 +0000 [700606a659]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_nat: Rewrite route set when required.

	  When performing some provider testing, the rewrite_contact option was
	  interfering with proper construction of a route set when sending an ACK
	  after receiving a 200 OK response to an INVITE.

	  The initial INVITE was sent to address sip:foo. The 200 OK had a Contact
	  header with URI sip:bar. In addition, the 200 OK had Record-Route
	  headers for sip:baz and sip:foo, in that order. Since the Record-Route
	  headers had the lr parameter, the result should have been:

	  * Set R-URI of the ACK to sip:bar.
	  * Add Route headers for sip:foo and sip:baz, in that order.

	  However, the rewrite_contact option resulted in our rewriting the
	  Contact header on the 200 OK to sip:foo. The result was:

	  * R-URI remained sip:foo.
	  * We added Route headers for sip:foo and sip:baz, in that order.

	  The result was that sip:bar was not indicated in the ACK at all, so the
	  far end never received our ACK. The call eventually dropped.

	  The intention of rewrite_contact is to rewrite the most immediate
	  destination of our SIP request to be the same address on which we
	  received a request or response. In the case of processing a SIP response
	  with Record-Route headers, this means that instead of rewriting the
	  Contact header, we should instead rewrite the bottom-most Record-Route
	  header. In the case of processing a SIP request with Record-Route
	  headers, this means we rewrite the top-most Record-route header.
	  Like when we rewrite the Contact header, we also ensure to update
	  the dialog's route set if it exists.

	  ASTERISK-25196 #close
	  Reported by Mark Michelson

	  Change-Id: I9702157c3603a2d0bd8a8215ac27564d366b666f
2015-06-19 16:16 +0000 [af4ae3095e]  Richard Mudgett <rmudgett@digium.com>

	* threadpool, res_pjsip: Add serializer group shutdown API calls.

	  A module trying to unload needs to wait for all serializers it creates and
	  uses to complete processing before unloading.

	  ASTERISK-24907
	  Reported by: Kevin Harwell

	  Change-Id: I8c80b90f2f82754e8dbb02ddf3c9121e5e966059

2015-06-16 15:06 +0000 [4c133d81cd]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Fix handle_client_state_destruction() refs

	  * handle_client_state_destruction() must always be passed a ref to
	  client_state because it will always unref client_state.
	  handle_registration_response() was not passing a client_state ref.

	  * Made the final un-REGISTER message get sent normally using the pjproject
	  register control structure in handle_client_state_destruction().  The
	  previous code attempted to short circuit the response handling for the
	  module to unload.  That doesn't work for a couple reasons.  One,
	  pjsip_regc_send() may call the registered callback before it returns and
	  unbalance the client_state ref count.  Two, the registered callback
	  handles any authentication for the un-REGISTER message.

	  * Made the distinction between internal registration state and external
	  registration status with sip_outbound_registration_status_str().  This is
	  necessary to avoid altering documented AMI messages with internal
	  changes.

	  * Removed references to client_state->client outside of the serializer
	  thread.  When handle_client_state_destruction() destroys the pjproject
	  register control structure that memory is freed and cannot be referenced
	  anymore.  These accesses were to provide information for debug and
	  off-nominal warning messages.

	  * In sip_outbound_registration_timer_cb() you should not access entry->id
	  after unrefing client_state because the passed in entry is normally
	  pointing to the timer entry in the client_state object.

	  ASTERISK-24907
	  Reported by: Kevin Harwell

	  Change-Id: Ia7b446d8644b6b4550ef5bea49527671de65183f

2015-06-15 15:28 +0000 [dc63377c60]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Use ast_sorcery_object_unregister() API

	  The sorcery pjsip 'registration' config object needs to be destroyed on
	  module unload.  Otherwise, a reload of res_pjsip could try to use
	  callbacks for a previously unloaded instance of the module provided by
	  ast_sorcery_object_register() or one of the variants.  Also, if
	  res_pjsip_outbound_registration were subsequently reloaded, the sorcery
	  config field objects would be registered in sorcery twice.

	  ASTERISK-24907
	  Reported by: Kevin Harwell

	  Change-Id: I304fad13dece2604af48353f6c6d9d5c7b064697

2015-06-15 15:28 +0000 [9ec8a0f3cc]  Richard Mudgett <rmudgett@digium.com>

	* sorcery: Add ast_sorcery_object_unregister() API call.

	  Find and unlink the specified sorcery object type to complement
	  ast_sorcery_object_register().  Without this function you cannot
	  completely unload individual modules that use sorcery for configuration.

	  ASTERISK-24907
	  Reported by: Kevin Harwell

	  Change-Id: I1c04634fe9a90921bf676725c7d6bb2aeaab1c88

2015-06-15 13:38 +0000 [77ff7325a2]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Reorder load_module() and unload_module().

	  It is best if the loading code creates and initializes the module's
	  infrastructure before letting the system know of its existence.  The
	  unloading code needs to reverse the actions of the loading code and in the
	  reverse order.

	  ASTERISK-24907
	  Reported by: Kevin Harwell

	  Change-Id: I5d151383e9787b5b60aa5e1627b10f040acdded4

2015-06-25 06:42 +0000 [8d6cf667dc]  Joshua Colp <jcolp@digium.com>

	* channel: Remove ignore of answer on non-outgoing channels.

	  Due to the way that channels can now be moved around inside of
	  Asterisk it is possible for the outgoing flag of a channel to get
	  cleared before it has been answered. This results in the bridge
	  not receiving notification that the outgoing leg has been answered.

	  This most easily exhibits itself with DTMF based blond transfers.
	  Since the answer of the outgoing leg is ignored the other party
	  continues to receive both a locally generated ringing and the
	  media stream of the outgoing leg upon its answer. This results
	  in no media being heard.

	  This change removes the ignore of the answer and allows it
	  to pass through.

	  ASTERISK-25171 #close

	  Change-Id: I82aedcec4f89f34a2e5472086dfc9a6c775bca8e

2015-06-24 14:30 +0000 [daaa551c92]  Richard Mudgett <rmudgett@digium.com>

	* test.c: Add unit test registration checks for summary and description.

	  Added checks when a unit test is registered to see that the summary and
	  description strings do not end with a new-line '\n' for consistency.

	  The check generates a warning message and will cause the
	  /main/test/registrations unit test to fail.

	  * Updated struct ast_test_info member doxygen comments.

	  Change-Id: I295909b6bc013ed9b6882e85c05287082497534d

2015-06-24 16:39 +0000 [71a4d1a033]  Richard Mudgett <rmudgett@digium.com>

	* Unit tests: Fix more unit test description strings.

	  Analyzing the code shows that the unit test summary and description
	  strings should not end with a new-line character.  Where these strings are
	  used in the code a new-line is provided for output.

	  Change-Id: I2f4f37988ec363c8d1c5077a2fc8ca841c5cd30c

2015-06-24 14:39 +0000 [9c6d72e30d]  Richard Mudgett <rmudgett@digium.com>

	* Unit tests: Fix unit test description strings.

	  Analyzing the code shows that the unit test summary and description
	  strings should not end with a new-line character.  Where these strings are
	  used in the code a new-line is provided for output.

	  Change-Id: I129284f5e7ca93d82532334076da4c462d3d9fba

2015-06-24 16:37 +0000 [a0c2d2089d]  Richard Mudgett <rmudgett@digium.com>

	* DNS unit tests: Fix extraneous description string commas.

	  Change-Id: Icf5f13c8e1c2c92a4473bb573ed2dd856ce1b64e

2015-06-23 11:21 +0000 [3b2b004d69]  Joshua Colp <jcolp@digium.com>

	* app_dial: Hold reference to calling channel formats when dialing outbound.

	  Currently when requesting a channel the native formats of the
	  calling channel are provided to the core for usage when dialing
	  the outbound channel. This occurs without holding the channel lock
	  or keeping a reference to the formats. This is problematic as
	  the channel driver may end up changing the formats during this time.
	  In the case of chan_sip this happens when an SDP negotiation
	  completes.

	  This change makes it so app_dial keeps a reference to the native
	  formats of the calling channel which guarantees that they will
	  remain valid for the period of time needed.

	  ASTERISK-25172 #close

	  Change-Id: I2f0a67bd0d5d14c3bdbaae552b4b1613a283f0db

2015-06-17 16:23 +0000 [af66b0f3f7]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Add missing line endings to CLI commands

	  Change-Id: I39ae612746d892d2dbe86f3ff2d7027fa1da57f7

2015-06-12 14:29 +0000 [3f0708e5fe]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Eliminate simple RAII_VAR() usage.

	  Change-Id: I399cb9d61bbba706b48c98e0bf75e98984cd9a9e

2015-06-12 13:33 +0000 [9ceb848242]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Misc code cleanups.

	  * Break some long lines.

	  * Fix doxygen comment.

	  Change-Id: I8f12ba6822f84d5e7bb575280270cd7e2fefb305

2015-06-22 15:11 +0000 [44c3c392e3]  Kevin Harwell <kharwell@digium.com>

	* bridge.c: Hangup attended transfer target if bridged

	  After completing an attended transfer the transfer target channel was not being
	  hung up after leaving the bridge. Added an explicit softhangup to hangup said
	  channel, but only if it was previously bridged.

	  ASTERISK-24782 #close
	  Reported by: John Bigelow

	  Change-Id: Idde9543d56842369384a5e8c00d72a22bbc39ada

2015-06-17 05:04 +0000 [7846f73432]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_mwi: Set up unsolicited MWI upon registration.

	  The res_pjsip_mwi previously required a reload to set up the proper
	  subscriptions to allow unsolicited MWI to work. This change
	  makes it so the act of registering will also cause this to occur.
	  This is particularly useful if realtime is involved as no reload
	  needs to occur within Asterisk to cause the MWI information
	  to get sent.

	  ASTERISK-25180 #close

	  Change-Id: Id847b47de4b8b3ab8858455ccc2f07b0f915f252

2015-06-22 13:57 +0000 [096b27d9d2]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Fix whitespace conflict potential.

	  Change-Id: I82e6e388e3688aebe0783f16c9e0800a747584b5

2015-06-22 09:26 +0000 [1ad9a6b6b6]  Alexander Traud (License 6520)

	* chan_sip: Reload peer without its old capabilities.

	  On reload, previously allowed codecs were not removed. Therefore, it was not
	  possible to remove codecs while Asterisk was running. Furthermore, newly added
	  codecs got appended behind the previous codecs. Therefore, it was not possible
	  to add a codec with a priority of #1. This change removes the old capabilities
	  before the current ones are added.

	  ASTERISK-25182 #close
	  Reported by: Alexander Traud
	  patches:
	   asterisk_13_allow_codec_reload.patch uploaded by Alexander Traud (License 6520)

	  Change-Id: I62a06bcf15e08e8c54a35612195f97179ebe5802

2015-06-20 19:38 +0000 [5caefc98a1]  Joshua Colp <jcolp@digium.com>

	* chan_sip: Destroy peers without holding peers container lock.

	  Due to the use of stasis_unsubscribe_and_join in the peer destructor
	  it is possible for a deadlock to occur when an event callback is
	  occurring at the same time.

	  This happens because the peer may be destroyed while holding the
	  peers container lock. If this occurs the event callback will never
	  be able to acquire the container lock and the unsubscribe will
	  never complete.

	  This change makes it so the peers that have been removed from the
	  peers container are not destroyed with the container lock held.

	  ASTERISK-25163 #close

	  Change-Id: Ic6bf1d9da4310142a4d196c45ddefb99317d9a33

2015-06-18 13:16 +0000 [d7a1e84a1e]  Mark Michelson <mmichelson@digium.com>

	* Resolve race conditions involving Stasis bridges.

	  This resolves two observed race conditions.

	  First, a bit of background on what the Stasis application does:

	  1a Creates a stasis_app_control structure. This structure is linked into
	     a global container and can be looked up using a channel's unique ID.
	  2a Puts the channel in an event loop. The event loop can exit either
	     because the stasis_app_control structure has been marked done, or
	     because of some other factor, such as a hangup. In the event loop, the
	     stasis_app_control determines if any specific ARI commands need to be
	     run on the channel and will run them from this thread.
	  3a Checks if the channel is bridged. If the channel is bridged, then
	     ast_bridge_depart() is called since channels that are added to Stasis
	     bridges are always imparted as departable.
	  4a Unlink the stasis_app_control from the container.

	  When an ARI command is received by Asterisk, the following occurs
	  1b A thread is spawned to handle the HTTP request
	  2b The stasis_app_control(s) that corresponds to the channel(s) in the
	     request is/are retrieved. If the stasis_app_control cannot be
	     retrieved, then it is assumed that the channel in question has exited
	     the Stasis app or perhaps was never in Stasis in the first place.
	  3b A command is queued onto the stasis_app_control, and the channel's
	     event loop thread is signaled to run the command.
	  4b While most ARI commands do nothing further, some, such as adding or
	     removing channels from a bridge, will block until the command they
	     issued has been completed by the channel's event loop.

	  The first race condition that is solved by this patch involves a crash
	  that can occur due to faulty detection of the channel's bridged status
	  in step 3a. What can happen is that in step 2a, the event loop may run
	  the ast_bridge_impart() function to asynchronously place the channel
	  into a bridge, then immediately exit the event loop because the channel
	  has hung up. In step 3a, we would detect that the channel was not
	  bridged and would not call ast_bridge_depart(). The reason that the
	  channel did not appear to be bridged was that the depart_thread that is
	  spawned by ast_bridge_impart() had not yet started. That is the thread
	  where the channel is marked as being bridged. Since we did not call
	  ast_bridge_depart(), the Stasis application would exit, and then the
	  channel would be destroyed Then the depart_thread would start up and
	  try to manipulate the destroyed channel, causing a crash.

	  The fix for this is to switch from using ast_channel_is_bridged() to
	  checking the NULLity of ast_channel_internal_bridge_channel() to
	  determine if ast_bridge_depart() needs to be called. The channel's
	  internal bridge_channel is set when ast_bridge_impart() is called and
	  is NULLed by the call to ast_bridge_depart(). If the channel's internal
	  bridge_channel is non-NULL, then the channel must have been imparted
	  into the bridge and needs to be departed, even if the actual bridging
	  operation has not yet started. By departing the channel when necessary,
	  the thread that is running the Stasis application will block until the
	  bridge gives the okay that the depart_thread has exited.

	  The second race condition that is solved by this patch involves a leak
	  of HTTP handler threads. The problem was that step 2b would successfully
	  retrieve a stasis_app_control structure. Then step 2a would exit the
	  channel from the event loop due to a hangup. Steps 3a and 4a would
	  execute, and then finally steps 3b and 4b would. The problem is that at
	  step 4b, when attempting to add a channel to a bridge, the thread would
	  block forever since the channel would never execute the queued command
	  since it was finished with the event loop. This meant that the HTTP
	  handling thread would be leaked, along with any references that thread
	  may have owned (in my case, I was seeing bridges leaked).

	  The fix for this is to hone in better on when the channel has exited the
	  event loop. The stasis_app_control structure has an is_done field that
	  is now set at each point where the channel may exit the event loop. If
	  step 2b retrieves a valid stasis_app_control structure but the control
	  is marked as done, then the attempted operation exits immediately since
	  there will be nothing to service the attempted command.

	  ASTERISK-25091 #close
	  Reported by Ilya Trikoz

	  Change-Id: If66265b73b4c9f8f58599124d777fedc54576628
2015-06-17 07:00 +0000 [9668a1acb5]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_memory_cache: Remove 'prefetch' option.

	  To prevent confusion I am removing the prefetch option until such
	  time as it is implemented. All other functionality, however, has
	  been implemented.

	  ASTERISK-25067

	  Change-Id: I9ce6aa3e5c6c5bc3c5baa8ff90fa036d73939895

2015-06-16 11:13 +0000 [59552c2d08]  Mark Michelson <mmichelson@digium.com>

	* Parking: Add documentation for AMI ParkedCallSwap event.

	  This event was added some time ago in order to clarify when a channel
	  took the place of another channel in a parking lot. However, there was
	  no XML documentation added for the event. This patch adds the XML
	  documentation.

	  ASTERISK-24900 #close
	  Reported by Rusty Newton

	  Change-Id: I4cfe7777c4b94bbff91c9221c6096a7a02a92eac
2015-06-15 16:40 +0000 [ea9d5f155e]  Corey Farrell <git@cfware.com>

	* func_pjsip_aor: Fix leaked contact from iterator.

	  ASTERISK-25162 #close

	  Change-Id: Id79aa3c6fe490016ee98efc97ac4c1d3f461f97e

2015-06-12 16:58 +0000 [93ac45d3bd]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: Add option to force G.726 to be treated as AAL2 packed.

	  Some phones send g.726 audio packed for AAL2, which differs from what is
	  recommended by RFC 3351. If Asterisk receives audio formatted as such when
	  negotiating g.726 then it sounds a bit distorted. Added an option to
	  res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
	  AAL2 packed.

	  ASTERISK-25158 #close
	  Reported by: Steve Pitts

	  Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615

2015-06-14 19:48 +0000 [15c2208701]  Matt Jordan <mjordan@digium.com>

	* main/cdr: Carry over the disable flag when 'disable all' is specified

	  The CDR_PROP function (as well as the NoCDR application) set the
	  'disable all' flag (AST_CDR_FLAG_DISABLE_ALL) on the current CDR. This
	  flag is supposed to be applied to all CDRs that are currently in the
	  chain, as well as all CDRs that may be created in the future. Currently,
	  however, the flag is only applied to the existing CDRs in the chain; new
	  CDRs do not receive the 'disable all' flag. In particular, this affects
	  parallel dials, which generate new CDRs for each pair of channels in
	  the dial attempt.

	  This patch carries over the 'disable all' flag when it is specified on a
	  CDR and a new CDR is generated for the chain.

	  ASTERISK-24344 #close

	  Change-Id: I91a0f0031e4d147bdf8a68ecd08304d506fb6a0e
2015-06-12 14:28 +0000 [b8bc15286f]  Matt Jordan <mjordan@digium.com>

	* main/cdr: Copy context/exten on chained CDRs for parallel dials in subroutines

	  When a parallel dial occurs, a new CDR will be created for each dial
	  attempt that is made. In most circumstances, the act of creating each
	  CDR in the chain will include a step that updates the Party A snapshot,
	  which causes the context/extension of the Party A to be copied onto the
	  CDR object.

	  However, when the Party A is in a subroutine, we explicitly do *not*
	  copy the context/extension onto the CDR. This prevents the Macro or
	  GoSub routine name from blowing away the context/extension that the
	  channel was originally executing in. For the original CDR, this is not a
	  problem: the original CDR already recorded the last known 'good' state
	  of the channel just prior to it going into the subroutine. However, for
	  newly generated CDRs in a chain, there is no context/extension set on
	  them. Since we are in a subroutine, we will never set the Party A's
	  context/extension on the CDR, and we end up with a CDR with no
	  destination recorded on it.

	  This patch updates the creation of a chained CDR such that it copies
	  over the original CDR's context/extension. This is the last known "good"
	  state of the CDR, and is a reasonable starting point for the newly
	  generated CDR. In the case where we are not in a subroutine, subsequent
	  code will update the location of the CDR from the Party A information;
	  in the case where we are in a subroutine, the context/extension on the
	  original CDR is the correct information.

	  ASTERISK-24443 #close

	  Change-Id: I6a3ef0d6e458d3b9b30572feaec70f2964f3bc2a

2015-06-11 08:18 +0000 [19f60d9412]  Damian Ivereigh <damo@launtel.net.au>

	* chan_sip.c: Update dialog fromtag after request with auth

	  If a client sends and INVITE which is 401 rejected, then subsequently
	  sends a new INVITE with the auth info and uses a different fromtag
	  from the first INVITE, Asterisk will accept the new INVITE as part of
	  the original dialog - match_req_to_dialog() specifically ignores the
	  fromtag. However it does not update the stored dialog with the new
	  fromtag.

	  This results in Asterisk being unable to match future packets that are
	  part of this dialog (such as the ACK to the OK or the OK to the BYE),
	  and the call is dropped.

	  This problem was originally found when using an NEC-i SV8100-GE (NEC SIP
	  Card).

	  * After a successful match of a packet to the dialog, if the packet is
	    not a SIP_RESPONSE, authentication is present and the fromtags are
	    different, the stored fromtag is updated with the one from the recent
	    INVITE.

	  ASTERISK-25154 #close
	  Reported by: Damian Ivereigh
	  Tested by: Damian Ivereigh

	  Change-Id: I5c16cf3b409e5ef9f2b2fe974b6bd2a45a6aa17e

2015-06-11 18:52 +0000 [bb00b26f35]  Matt Jordan <mjordan@digium.com>

	* chan_pjsip: Set the context and extension on the channel when created

	  Prior to this patch, chan_pjsip was failing to pass the endpoint's
	  context and the desired extension to the ast_channel_alloc_* routine.
	  This caused a new channel snapshot to be issued without a context and
	  extension, which can cause some reporting issues for users of AMI, CEL,
	  and other APIs. The channel driver would later set the context and
	  extension on the channel such that the channel would start in the
	  correct location in the dialplan, but the information reported in the
	  initial event would be incorrect.

	  This patch modifies the channel driver such that it now passes the
	  context and extension directly into the allocation routine. This
	  provides the information in the new channel snapshot published over
	  Stasis.

	  ASTERISK-25156 #close
	  Reported by: cloos

	  Change-Id: Ic6f8542836e596db8f662071d118e8f934fdf25e

2015-06-10 18:28 +0000 [7230ee2efe]  Joshua Colp <jcolp@digium.com>

	* bridge: When performing a blonde transfer update connected line information.

	  When performing a blonde transfer the code uses the old masquerade
	  mechanism to move a channel around. As a result of this certain information,
	  such as connected line, is moved between the channels involved. Upon
	  completion of the move a frame is queued which is supposed to update the
	  connected line information on the channel. This does not occur as the
	  code considers it a redundant update since the masquerade operation
	  updated the channel (but did not inform it of the new connected line
	  information). The code also does not queue a connected line update
	  to be handled by the thread handling the channel. Without this any
	  other channel that may be loosely involved does not know it is
	  talking to a different caller.

	  This change does the following to resolve this:

	  1. The indicated connected line information is cleared upon
	  completion of the masquerade operation when doing a blonde transfer.
	  This prevents the connected line update from being considered
	  redundant.

	  2. A connected line update frame is now queued upon the completion
	  of the masquerade operation so any other channel loosely involved
	  knows that there is a different caller.

	  ASTERISK-25157 #close
	  Reported by: Joshua Colp

	  Change-Id: Ibb8798184a1dab3ecd35299faecc420034adbf20

2015-06-11 14:39 +0000 [a657ab12f9]  Richard Mudgett <rmudgett@digium.com>

	* app_directory: Fix crash when using the alias option 'a'.

	  The voicemail.conf mailbox key/value pair is defined as:
	  <mailbox>=[<password>[,<full-name>[,<email>[,<pager>[,<options>]]]]]
	  Where all fields in the value including the field values are optional.

	  Since the parsing code for the mailbox key/value pair is sloppy, this
	  patch tightens the parsing for the directory information.

	  * Renamed the 'pos' and 'bufptr' variables to 'name' and 'options'
	  respectively in search_directory_sub().  Those names make more sense.

	  * Made sure that search_directory_sub() is dealing with the voicemail.conf
	  mailbox options field if it even exists when looking for the 'hidefromdir'
	  and 'alias' options.

	  * Fix crash if a voicemail.conf mailbox is just
	  <mailbox>=<password>,<name> when the 'a' option is used.  If there were no
	  fields after the name then the 'options' pointer was not checked for NULL.

	  * Fix users.conf alias processing if the 'a' option is used.  The wrong
	  variable was used.

	  ASTERISK-25087 #close
	  Reported by: Chet Stevens

	  Change-Id: I86052ea77307beddddba5279824d39dc0d593374

2015-06-05 15:37 +0000 [30cd559345]  Richard Mudgett <rmudgett@digium.com>

	* DNS: Need to use the same serializer for a pjproject SIP transaction.

	  All send/receive processing for a SIP transaction needs to be done under
	  the same threadpool serializer to prevent reentrancy problems inside
	  pjproject when using an external DNS resolver to process messages for the
	  transaction.

	  * Add threadpool API call to get the current serializer associated with
	  the worker thread.

	  * Pick a serializer from a pool of default serializers if the caller of
	  res_pjsip.c:ast_sip_push_task() does not provide one.

	  This is a simple way to ensure that all outgoing SIP request messages are
	  processed under a serializer.  Otherwise, any place where a pushed task is
	  done that would result in an outgoing out-of-dialog request would need to
	  be modified to supply a serializer.  Serializers from the default
	  serializer pool are picked in a round robin sequence for simplicity.

	  A side effect is that the default serializer pool will limit the growth of
	  the thread pool from random tasks.  This is not necessarily a bad thing.

	  * Made pjsip_resolver.c use the requesting thread's serializer to execute
	  the async callback.

	  * Made pjsip_distributor.c save the thread's serializer name on the
	  outgoing request tdata struct so the response can be processed under the
	  same serializer.

	  ASTERISK-25115 #close
	  Reported by: John Bigelow

	  Change-Id: Iea71c16ce1132017b5791635e198b8c27973f40a

2015-06-05 12:16 +0000 [b23f33e7e5]  Richard Mudgett <rmudgett@digium.com>

	* DNS: Fix some corner cases.

	  * Fix query_set destruction before we are done kicking the queries off.

	  * Fixed no queries requested handling.

	  * Add empty queries request unit test.

	  * Added missing allocation check in ast_dns_query_set_add().

	  * Made initial pjsip resolving query vector slightly larger.

	  ASTERISK-25115
	  Reported by: John Bigelow

	  Change-Id: Ie8be8347d0992e93946d72b6e7b1299727b038f2

2015-06-10 17:51 +0000 [ae589da466]  Richard Mudgett <rmudgett@digium.com>

	* DNS: Remove trailing newline from summary and descriptions.

	  Those trailing newlines mess up test formatting.

	  Change-Id: I5e3f3a55b82c9d7acb9661201d4993d1958f1185

2015-06-05 11:43 +0000 [83bc9d366d]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_resolver.c: Fix debug code to only execute at acceptable debug level.

	  Change-Id: I1716c93d6e097ad28128ecb9e806aac7a4180c8a

2015-06-05 11:41 +0000 [6d49dccd85]  Richard Mudgett <rmudgett@digium.com>

	* DNS: Fix doxygen comments.

	  Change-Id: Icafea3fb4ea64ac027561b23cbfe2b17997dc549

2015-06-09 15:31 +0000 [b705c09dbb]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.h: Fix some doxygen comments.

	  Change-Id: I4615771077c3c6a0a7273da6d7b5f77af7e8d976

2015-06-05 13:46 +0000 [aa8479778e]  Richard Mudgett <rmudgett@digium.com>

	* taskprocessor.c: Remove extra unref from off-nominal path.

	  Change-Id: Iee3bd8c8a528776056972066698fe735f0f6cf60

2015-05-31 12:37 +0000 [07f5f45e5a]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* res_pjsip_transport_websocket: Fix use-after-free bugs.

	  This patch fixes use-after-free bugs caught by AddressSanitizer.

	  1. PJSIP transport manager may decide to destroy transport on its own.
	  For example, when the contact registered via websocket has not renewed
	  its registration in time. The transport was destoyed, but the websocket
	  listener thread was still active until the socket closes, and then tried
	  to call transport_shutdown on transport that has been freed.

	  Also, the transport destructor accessed wstransport->rdata.tp_info.pool
	  right after freeing memory that contained wstransport itself.

	  This patch converts transport to an ao2 object, allowing it to be
	  refcounted, so that it is available until both websocket listener and
	  pjsip transport manager are finished with it.

	  2. The websocket listener deletes the last reference on websocket session
	  when the tcp connection is closed, and it gets destroyed, but
	  the transport manager may still use it, for example when disconnect
	  happens in the middle of a SIP transaction.

	  A new reference to websocket session has been added that is released
	  with the transport to prevent this.

	  ASTERISK-25096 #close
	  Reported by: Josh Kitchens

	  ASTERISK-24963 #close
	  Reported by: Badalian Vyacheslav

	  Change-Id: Idc0b63eb6e459c1ddfb2430127d34b3c4d8d373b

2015-06-09 13:41 +0000 [f897f36721]  ibercom <ibercom123@gmail.com>

	* weakref attribute detection broken with gcc 4.6 and higher

	  GCC 4.7 Manual:
	  http://gcc.gnu.org/onlinedocs/gcc-4.7.4/gcc/Function-Attributes.html

	  weakref ("target")

	  A weak reference is an alias that does not by itself require a definition
	  to be given for the target symbol.

	  ASTERISK-22559 #close
	  Reported by: Ibercom

	  Change-Id: I36a136cae947b65187a697533416f9ff9a0b8cdf

2015-06-08 10:09 +0000 [80621ce3c5]  Corey Farrell <git@cfware.com>

	* Fix unsafe uses of ast_context pointers.

	  Although ast_context_find, ast_context_find_or_create and
	  ast_context_destroy perform locking of the contexts table,
	  any context pointer can become invalid at any time that the
	  contexts table is unlocked. This change adds locking around
	  all complete operations involving these functions.

	  Places where ast_context_find was followed by ast_context_destroy
	  have been replaced with calls ast_context_destroy_by_name.

	  ASTERISK-25094 #close
	  Reported by: Corey Farrell

	  Change-Id: I1866b6787730c9c4f3f836b6133ffe9c820734fa

2015-06-08 09:44 +0000 [53c1126090]  Kevin Harwell <kharwell@digium.com>

	* AMI: Escape string values.

	  So this issue is a bit complicated. Since it is possible to pass values to AMI
	  that contain a '\r\n' (or other similar sequences) these values need to be
	  escaped. One way to solve this is to escape the values and then pass the escaped
	  values to the AMI variable parameter string building function. However, this
	  puts the onus on the pre-build function to escape all string values. This
	  potentially requires a fair amount of changes along with a lot of string
	  allocations/freeing for all values.

	  Surely there is a way to push this complexity down a level into the string
	  building function itself? This of course is possible, but ends up requiring a
	  way to distinguish between strings that need to be escaped and those that don't.
	  The best way to handle this is by introducing a new format specifier in the
	  format string. For instance a %s (no escape) and %S (escape). However, that is
	  a bit weird and unexpected.

	  So faced with those possibilities this patch implements a limited version of the
	  first option. Instead of attempting to escape all string values this patch only
	  escapes those values that make sense. This approach limits the number of changes
	  and doesn't suffer from the odd format specifier problem.

	  ASTERISK-24934 #close
	  Reported by: warren smith

	  Change-Id: Ib55a5b84fe0481b0f2caaaab68c566f392c0aac0

2015-06-02 15:07 +0000 [9fca378b36]  David M. Lee <dlee@respoke.io>

	* Fixes for OS X

	   * Add some type casting so tv_usec can really be a long, instead of
	     some strange platform specific type.

	   * Add some .dylib style files to .gitignore.

	   * Switch from using -Xlinker to -Wl,. For [reasons unknown][], newer
	     versions of GCC, when compiling the Homebrew formula for Asterisk,
	     are not properly passing the -Xlinker options to the linker. Given
	     that -Wl, does exactly the [same thing][], and does it properly, this
	     patch changes the -Xlinker options to use -Wl, instead.

	   [reasons unknown]: http://bit.ly/1SUbEYx
	   [same thing]: https://gcc.gnu.org/onlinedocs/gcc/Link-Options.html

	  Change-Id: Id5e6b3c6cc86282ea5fca630dc3991137c5bf4dd

2015-06-04 07:14 +0000 [d463bac574]  ibercom <ibercom123@gmail.com>

	* CLI: Cosmetic issue - core show uptime

	  Show uptime information ends with an unnecessary space.

	  Now NEEDCOMMA is better defined.

	  Change-Id: I11b360504a0703309ff51772ff8f672287f3c5a1

2015-06-04 13:11 +0000 [128fe4cee8]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_memory_cache: Implement expire_on_reload option.

	  This change implements the expire_on_reload option for memory caches.
	  If enabled and a reload is performed all objects within the cache
	  will be expired and the cache emptied.

	  ASTERISK-25067
	  Reported by: Matt Jordan

	  Change-Id: Id46aa1957d660556700e689e195eed57c989b85e

2015-06-02 10:20 +0000 [028edae82e]  Joshua Colp <jcolp@digium.com>

	* test_sorcery_memory_cache_thrash: Add unit tests for thrashing the memory cache.

	  This change adds a CLI command which can perform memory cache thrashing as well
	  as unit tests which perform thrashing under the following configurations:

	  1. Low number of unique objects that go stale after 1 second
	  2. Low number of unique objects that expire after 1 second
	  3. Low number of unique objects which are constantly updated
	  4. Large number of unique objects which exceed a defined cache size
	  5. Large number of unique objects which exceed a defined cache size
	     that also expire and go stale rapidly
	  6. Large number of unique objects which expire and go stale rapidly
	  7. Large number of unique objects

	  For all of the above there are a large number of threads constantly
	  attempting to retrieve random objects and each test runs for a few
	  seconds.

	  ASTERISK-25067
	  Reported by: Matt Jordan

	  Change-Id: I8c8ceff977332c80ed4a31f10d694d48552b2f78

2015-06-04 05:33 +0000 [19de2bbc5f]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_memory_cache: Add test event when a refresh occurs.

	  This change adds a testsuite event for when a refresh occurs.
	  This is useful as it provides a guaranteed mechanism of knowing when
	  it has occurred instead of waiting an arbitrary amount of time.

	  ASTERISK-25067
	  Reported by: Matt Jordan

	  Change-Id: Iaa6b8d2d6bab7f99ee08e1c8908b8272a8987e65

2015-06-03 20:12 +0000 [6737ded058]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* install_prereq: Check if is installed aptitude otherwise to install.

	  If in Debian or system based, dont have aptitude installed the script do
	  nothing. This patch checked if aptitude  installed, if not installed.

	  Also, if execute script with all packages installed yet, the script not show
	  nothing and return exit 1 because the command 'grep' get nothing from pipe from
	  'awk'.

	  ASTERISK-25113 #close
	  Reported By: Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	  Change-Id: Iebdff55805d3917166e5e08e0a1e2176f36ff27f

2015-06-03 17:41 +0000 [92ccffd9e6]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip: Prevent access of NULL channels.

	  It is possible to receive incoming requests or responses after the channel
	  on an ast_sip_session has been destroyed and NULLed out. Handlers of these
	  sorts of requests or responses need to be prepared for the possibility
	  that the channel is NULL or else they could cause a crash.

	  While several places have been amended to deal with NULL channels, there
	  were still a couple of places that needed updating.

	  res_pjsip_dtmf_info.c: When handling incoming INFO requests, we need to
	  return early if there is no channel on the session.

	  res_pjsip_session.c: When handling a 302 response, we need to stop the
	  redirecting attempt if there is no channel on the session.

	  ASTERISK-25148 #close
	  reported by Mark Michelson

	  Change-Id: Id1a75ffc3d0eaa168b0b28188fb54d6cf9fc47a9

2015-06-03 13:17 +0000 [d355ee7ff3]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip/location: Fix ref leak in contact_apply_handler

	  contact_apply_handler calls ast_res_pjsip_find_or_create_contact_status
	  to force the creation of a contact_status object whenever a new
	  contact is added but it didn't unref the returned object.

	  Added an ao2_cleanup(status) to plug the leak.

	  ASTERISK-25141

	  Change-Id: Icc1401cae142855a1abc86ab5179dfb3ee861c40
	  Reported-by: Corey Farrell

2015-06-02 13:02 +0000 [6d8dc9bb5c]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Remove outgoing authentication code no longer needed.

	  Associated with ASTERISK-25131

	  Change-Id: Iefa3b2066cfd8b108a90d2dd4a64d92c3a195d33

2015-06-02 12:55 +0000 [00a47ffc7e]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session: Fix cherry pick to master compile error.

	  ASTERISK-25131
	  Reported by: Richard Mudgett

	  Change-Id: I87c9c96ae4a8fe2bc8a0ddea6958a2ad9cefd8e3

2015-06-02 12:27 +0000 [9472bbaa95]  Joerg Sonnenberger <joerg@bec.de>

	* Remove const cast from leaf functions.

	  app_control_register_rule and app_control_unregister_rule lock/unlock
	  the queue, which is a mutating operation according to the
	  ao2_lock/_unlock prototype. Depending on the specific (implicit) casts
	  in SCOPED_LOCK and RAII_VAR, the compiler may warn or not. As the only
	  callers of those functions do not have the const, get consistent results
	  by just dropping it.

	  Change-Id: Ib9e6296155a39bc5d627142a3828180c3cfe8fbb

2015-06-02 11:35 +0000 [5f712e82ac]  Joerg Sonnenberger <joerg@bec.de>

	* tcptls.c: Don't use OpenSSL functions when no SSL support is present.

	  Change-Id: I68a85a7fcbdb282140ff333c6274b6763d5f82a3
2015-06-01 12:08 +0000 [2cd40c2bd7]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr/cdr_csv.c: Set file name for csv master to the module when (re)loaded.

	  Compute the location for the csv master file when the module is
	  loaded or reload.  Before it was calculated every time a log
	  entry was written.

	  Change-Id: I3ed9f6a8f965308099db70b71128f43d4d3f5585
2015-05-26 13:56 +0000 [5cdcae5240]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session: Fix in-dialog authentication.

	  When the remote peer requires authentication for in-dialog requests then
	  re-INVITEs to the peer cause the call to be disconnected and other
	  in-dialog requests to the peer like MESSAGE just don't go through.

	  * Made session_inv_on_tsx_state_changed() handle in-dialog authentication
	  for re-INVITEs and other methods.  Initial INVITEs cannot be handled here
	  because the INVITE transaction must be restarted earlier.

	  * Pulled needed code from res/res_pjsip/pjsip_outbound_auth.c in
	  preparation for removing the file.  The generic outbound authentication
	  code did not work as well as anticipated.

	  * Created outbound_invite_auth() to only handle initial outbound INVITEs.
	  Re-INVITEs cannot be handled here.  The re-INVITE transaction is still in
	  progress and the PJSIP library cannot handle the overlapping INVITE
	  transactions.  Other method types should not be handled here as this code
	  only works on outgoing calls and we need to handle incoming and outgoing
	  calls.

	  ASTERISK-25131 #close
	  Reported by: Richard Mudgett

	  Change-Id: I12bdd7ddccc819b4ce4b091e826d1e26334601b0

2015-05-30 20:22 +0000 [9f1939ee27]  Corey Farrell <git@cfware.com>

	* pjsip_configuration: Fix leak in persistent_endpoint_update_state.

	  The loop to find the first available contact of an endpoint grabbed
	  contact from the iterator, then checked for offline state.  This
	  caused the first contact after the state was found to leak a reference.

	  ASTERISK-25141

	  Change-Id: Id0f1d87410fc63742db0594eb4b18b36e99aec08

2015-05-31 11:33 +0000 [0a5f8c0d73]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* Fix buffer overflow in slin sample frames generation.

	  The length of frames retured by sample functions was twice as large as
	  real, what caused global buffer overflow caught by AddressSanitizer.

	  ASTERISK-24717 #close
	  Reported by: Badalian Vyacheslav

	  Change-Id: Iec2fe682aef13e556684912f906bedf7c18229c6

2015-05-29 16:19 +0000 [bef000dd7c]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip/location:  Fix memory leak in permanent_uri_handler

	  When permanent_uri_handler was creating the contact status
	  object for each contact, it wasn't unreffing it at the
	  end of the loop.

	  ASTERISK-25141 #close
	  Reported-by: Corey Farrell

	  Change-Id: I7bb127994677bb3d459f87952f8425c9b9967b12

2015-05-29 14:52 +0000 [82716410a4]  gtjoseph <george.joseph@fairview5.com>

	* Revert "endpoint/stasis: Eliminate duplicate events on endpoint status change"

	  This reverts commit 6fca75bb628dfff2ab112e80b0228cf3ac0b8a05.

	  Change-Id: Ifee026cc63e22c5ac5717c37867a9f036373ae5a

2015-05-26 07:34 +0000 [dfc45254d1]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_memory_cache: Add CLI commands and AMI actions.

	  This change adds the following CLI commands and AMI actions:

	  sorcery memory cache show
	  sorcery memory cache dump
	  sorcery memory cache expire
	  sorcery memory cache stale

	  SorceryMemoryCacheExpire
	  SorceryMemoryCacheExpireObject
	  SorceryMemoryCacheStale
	  SorceryMemoryCacheStaleObject

	  These allow both examination and manipulation of sorcery memory
	  caches from external sources.

	  Cached objects can be explicitly expired from a cache or marked
	  as stale. If expired they are immediately removed. If marked as
	  stale they will be background refreshed when next retrieved.

	  ASTERISK-25067
	  Reported by Matt Jordan

	  Change-Id: I68e03cfd8c34b5e07f4b6ee4fd93a3f4a00a3d9e

2015-05-27 13:22 +0000 [6fca75bb62]  gtjoseph <george.joseph@fairview5.com>

	* endpoint/stasis: Eliminate duplicate events on endpoint status change

	  When an endpoint was created, it's messages were being forwarded to
	  both the tech endpoint topic and the all endpoints topic.  Since
	  the tech topic was also forwarded to all, this was resulting in
	  duplicate messages whenever an endpoint published.  This patch
	  causes the endpoint to only forward to the tech topic and lets
	  the tech topic forward to all.

	  To accomplish this, the existing stasis_cp_single_create function
	  (which both creates and forwards) was cloned and split into 2
	  functions, one that creates the topic and one that sets up the
	  forwarding.  This allows endpoint_internal_create to create
	  the topic from the endpoint_all cache without forwarding it there,
	  then allows it to do the forward to the tech's topic.

	  ASTERISK-25137 #close
	  Reported-by: Vitezslav Novy
	  ASTERISK-25116 #close
	  Reported-by: George Joseph <george.joseph@fairview5.com>
	  Tested-by: George Joseph <george.joseph@fairview5.com>

	  Change-Id: I26d7d4926a0861748fd3bdffe316b75b549a801c

2015-05-26 13:01 +0000 [2e54e7227c]  Mark Michelson <mmichelson@digium.com>

	* res_sorcery_memory_cache: Add support for refreshing stale objects.

	  This change introduces a check of object_lifetime_stale when retrieving
	  cached objects. If the amount of time the object has been in the cache
	  exceeds the lifetime, then a task is scheduled to update the cached
	  object based on an object retrieved from other sorcery wizards instead.

	  To prevent the cached object from being retrieved during a refresh,
	  thread-local storage is used to mark the thread as being a stale object
	  update. This results in the cache returning no object, leading to
	  sorcery querying other wizards for the object instead.

	  A test has been added for stale objects as well. This test ensures that
	  stale objects are retrieved the same as freshly-cached objects. The test
	  also ensures that after an object is stale, changes in the backend are
	  reflected in the cache, to include if the object has been deleted from
	  the backend.

	  ASTERISK-25067
	  Reported by Matt Jordan

	  Change-Id: I9bd7c049adf6939bfe2899f393c2bfbbf412d217
2015-05-21 17:21 +0000 [b8ac683822]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip: Add AMI events for chan_pjsip contact lifecycle changes

	  Add a new ContactStatus AMI event.
	  Publish the following status/state changes:
	  Created
	  Removed
	  Reachable
	  Unreachable
	  Unknown

	  Contact URI, new status/state, aor and endpoint names, and the
	  last qualify rtt result are included in the event.

	  ASTERISK-25114 #close

	  Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e
	  Reported-by: George Joseph <george.joseph@fairview5.com>
	  Tested-by: George Joseph <george.joseph@fairview5.com>

2015-05-07 11:18 +0000 [95b186a174]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* res/res_config_pgsql.c: Use PQescapeStringConn for escaping names.

	  Use function PQescapeStringConn for escaping the name of the table and
	  schema instead of doing it manually.

	  ASTERISK-25132 #close
	  Reported By: Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	  Change-Id: I302a263f7210d20925f14716b508b081998b7608

2015-05-26 07:44 +0000 [a7af6bca3c]  Joshua Colp <jcolp@digium.com>

	* sorcery: Fix cache creation callback.

	  The cache creation callback function expects to receive a sorcery_details
	  structure and not just a standalone object.

	  Change-Id: I3e4a5a137cb25292eb52d7a14cbb6daa09213450

2015-05-24 13:47 +0000 [23a798fecc]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* Astobj2: Correctly treat hash_fn returning INT_MIN

	  The code in astobj2_hash.c wrongly assumed that abs(int) is always > 0.
	  However, abs(INT_MIN) = INT_MIN and is still negative, as well as
	  abs(INT_MIN) % num_buckets, and as a result this led to a crash.

	  One way to trigger the bug is using host=::80 or 0.0.0.128 in peer
	  configuration section in chan_sip or chan_iax.

	  This patch takes the remainder before applying abs, so that bucket
	  number is always in range.

	  ASTERISK-25100 #close
	  Reported by: Mark Petersen

	  Change-Id: Id6981400ad526f47e10bcf7b847b62bd2785e899
2015-05-23 04:36 +0000 [70d54ab6c4]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* res_pjsip_transport_websocket: Fix crash on receiving large SIP packets

	  Incoming SIP packets larger than PJSIP_MAX_PKT_LEN were themselves
	  truncated before passing to pjsip_tpmgr_receive_packet, but the length
	  was passed unaltered, thus causing memory corruption and segfault.

	  ASTERISK-25122 #close

	  Change-Id: I608a6b6b7f229eacc33a0a7d771d18e27e5b08ab

2015-05-22 21:50 +0000 [50044fdc15]  Corey Farrell <git@cfware.com>

	* Stasis: Fix unsafe use of stasis_unsubscribe in modules.

	  Many uses of stasis_unsubscribe in modules can be reached through unload.
	  These have been switched to stasis_unsubscribe_and_join.

	  Some subscription callbacks do nothing, for these I've created a noop
	  callback function in stasis.c.  This is used by some modules that monitor
	  MWI topics in order to enable cache, since the callback does not become
	  invalid after dlclose it is safe to use stasis_unsubscribe on these, even
	  during module unload.

	  ASTERISK-25121 #close

	  Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c

2015-05-22 16:52 +0000 [5a1f2a5884]  Corey Farrell <git@cfware.com>

	* Astobj2: Run weakproxy subscription callbacks in reverse order.

	  Modify ao2_weakproxy_subscribe so each new subscription is added
	  to the head of the list.  This ensures that when other objects
	  are allocated and use a subscription to the weakproxy for cleanup,
	  cleanup will occur in the correct order.

	  ASTERISK-25120 #close

	  Change-Id: Ie0476f08ec21330de1b3f5a2dd3d9eb683df3d3d

2015-05-22 12:22 +0000 [f66c41e668]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_pubsub: Note that 'dialog' is also a valid event type for RLS

	  In addition to specifying lists of 'presence' and 'message-summary',
	  users can also create lists of type 'dialog'. These should be treated in
	  the same fashion as 'presence'.

	  Change-Id: I583bb69cd9f88b0b29bf09ddaddeac4e84189f6e

2015-05-22 12:18 +0000 [ad7192a8fd]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_exten_state: Fix confusing NOTICE message

	  When a SUBSCRIBE request is made to a dialplan hint that doesn't exist,
	  the current NOTICE message informing users of this swaps the context and
	  extension parameters. This can cause a bit of confusion.

	  Thanks to CptBurger in #asterisk for helping to point this out.

	  Change-Id: Ie584d1a58ae217385c87a450ca25b55ca0e36e43

2015-05-17 20:36 +0000 [9cffcca5f9]  Matt Jordan <mjordan@digium.com>

	* res/ari: Register Stasis application on WebSocket attempt

	  Prior to this patch, when a WebSocket connection is made, ARI would not
	  be informed of the connection until after the WebSocket layer had
	  accepted the connection. This created a brief race condition where the
	  ARI client would be notified that it was connected, a channel would be
	  sent into the Stasis dialplan application, but ARI would not yet have
	  registered the Stasis application presented in the HTTP request that
	  established the WebSocket.

	  This patch resolves this issue by doing the following:
	   * When a WebSocket attempt is made, a callback is made into the ARI
	     application layer, which verifies and registers the apps presented in
	     the HTTP request. Because we do not yet have a WebSocket, we cannot
	     have an event session for the corresponding applications. Some
	     defensive checks were thus added to make the application objects
	     tolerant to a NULL event session.
	   * When a WebSocket connection is made, the registered application is
	     updated with the newly created event session that wraps the WebSocket
	     connection.

	  ASTERISK-24988 #close
	  Reported by: Joshua Colp

	  Change-Id: Ia5dc60dc2b6bee76cd5aff0f69dd53b36e83f636

2015-05-20 11:11 +0000 [29ef6571cb]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip: Refactor endpt_send_transaction (qualify_timeout)

	  This patch refactors the transaction timeout processing to eliminate
	  calling the lower level public pjsip functions and reverts to calling
	  pjsip_endpt_send_request again.  This is the result of me noticing
	  a possible incompatibility with pjproject-2.4 which was causing
	  contact status flapping.

	  The original version of this feature used the lower level calls to
	  get access to the tsx structure in order to cancel the transaction
	  when our own timer expires. Since we no longer have that access,
	  if our own timer expires before the pjsip timer, we call the callbacks
	  and just let the pjsip transaction take it's own course.  When the
	  transaction ends, it discovers the callbacks have already been run
	  and just cleans itself up.

	  A few messages in pjsip_configuration were also added/cleaned up.

	  ASTERISK-25105 #close

	  Change-Id: I0810f3999cf63f3a72607bbecac36af0a957f33e
	  Reported-by: George Joseph <george.joseph@fairview5.com>
	  Tested-by: George Joseph <george.joseph@fairview5.com>
2015-05-20 17:35 +0000 [81d375baad]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_memory_cache: Add support for object_lifetime_maximum.

	  This makes the "object_lifetime_maximum" option operational.

	  On the addition of an object to an empty memory cache a scheduled
	  task is created which, when invoked, expires objects from the cache
	  which have exceeded their lifetime. If more objects have been added
	  the remaining life of the oldest object is used to schedule the
	  next invocation of the scheduled task.

	  If the oldest object is removed from the cache before it can be
	  expired automatically the scheduled task is cancelled, if possible,
	  and the lifetime of the next oldest is used to schedule the task.

	  If during these two operations no additional objects exist in the
	  cache then no task is scheduled.

	  An additional unit test has been added which verifies this
	  functionality.

	  ASTERISK-25067
	  Reported by: Matt Jordan

	  Change-Id: I87409674674a508e7717ee20739ca15cec6ba7b6

2015-05-20 00:45 +0000 [9e2a582d2d]  demon-ru <serov.d.p@gmail.com>

	* res_pjsip_outbound_registration: Check request URI for line.

	  When an inbound call is received the To header is checked
	  for the "line" option. Some remote servers will place this
	  in the request URI instead. This adds an additional check for
	  the option in the request URI.

	  ASTERISK-25072 #close
	  Reported by: Dmitriy Serov

	  Change-Id: Id4e44debbb80baad623b914a88574371575353c8

2015-05-20 15:19 +0000 [071b3d43cb]  Mark Michelson <mmichelson@digium.com>

	* res_sorcery_memory_cache: Add support for maximum_objects.

	  This makes the "maximum_objects" option operational.

	  A heap has been added alongside the hash table in the cache. When
	  objects are added to the cache, they are also added to the heap.
	  Similarly, when objects are removed from the cache, they are removed
	  from the heap.

	  The heap's use comes into play when an item is to be added to a "full"
	  cache. When the cache is full, the oldest item is removed from the
	  cache, using the heap to determine the oldest item.

	  A unit test has been added that verifies that the maximum_objects option
	  works as expected and that the oldest object is removed from the cache
	  when an object beyond the maximum is added.

	  ASTERISK-25067 #close
	  Reported by Matt Jordan

	  Change-Id: I490658830e9c4cbf0b3051e4cdc4913cf9f1b73a

2015-05-16 17:02 +0000 [f2cc766d81]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_memory_cache: Add basic module implementation.

	  This change adds a basic res_sorcery_memory_cache module which implements
	  configuration option parsing, configuration file parsing for threading,
	  sorcery interface implementation, and unit tests.

	  Objects can be added, updated, deleted, and retrieved from the memory
	  cache. Automatic expiration and stale handling will be added in the
	  future.

	  Note that unit tests exist within the module itself in case the
	  threading done as a result of expiration results in asynchronous
	  actions (which it likely will). Providing access and a notification
	  mechanism for an external test module would be complicated and
	  not worth it.

	  ASTERISK-25067 #close
	  Reported by: Matt Jordan

	  Change-Id: Id8a6a357ef5a83d466f81eee56a67d13eeb118b9

2015-05-21 17:51 +0000 [36e5402885]  Corey Farrell <git@cfware.com>

	* res_mwi_external_ami: Use module version of AMI registration.

	  Use ast_manager_register_xml for res_mwi_external_ami manager
	  actions.  This ensures the module is held open while any of
	  the actions are being run.

	  ASTERISK-25117 #close
	  Reported by: Corey Farrell

	  Change-Id: Iececfdc2da498b2c32b9e09042f5f12292007ac7

2015-05-21 13:05 +0000 [3e2a994c71]  Matt Jordan <mjordan@digium.com>

	* ARI: Update version to 1.7.0

	  This patch updates the version of ARI to 1.7.0 to reflect the backwards
	  compatible changes that will be introduced in 13.4.0.

	  Change-Id: I6c36e6144da426412f25828a868e4df916bff60a
	  (cherry picked from commit 9d8a462356a938eea82e8424242d89a682495b57)

2015-05-20 20:53 +0000 [d067847695]  Corey Farrell <git@cfware.com>

	* Logger: Reset defaults before processing config.

	  Reset options to default values before reloading config.  This ensures
	  that if a setting is removed or commented out of the configuration file
	  it is unset on reload.

	  ASTERISK-25112 #close
	  Reported by: Corey Farrell

	  Change-Id: Id24bb1fb0885c2c14cf8bd6f69a0c2ee7cd6c5bd

2015-05-20 19:05 +0000 [31f0d78d7b]  gtjoseph <george.joseph@fairview5.com>

	* app_playback: Suppress warnings on playback if channel hung up

	  If a channel hangs up while an audio file is playing, there's
	  no need to clutter up the logs with a warning so suppress it
	  if ast_check_hangup returns true.

	  Also, change warning to debug/2 in file.c if writing a frame
	  fails.  Same reasoning.

	  Change-Id: I2e66191af3c5b6e951c98e8f1c3fe3cf2cf7ed89
	  Reported-by: George Joseph <george.joseph@fairview5.com>
	  Tested-by: George Joseph <george.joseph@fairview5.com>

2015-04-20 16:00 +0000 [83ff268b9e]  Yousf Ateya <y.ateya@starkbits.com>

	* chan_iax2: Prevent deadlock between hangup and sending lagrq/ping

	  channels/chan_iax.c: Prevent the deadlock between iax2_hangup and send_lagrq/
	  send_ping. This deadlock happens because the scheduled task send_lagrq(or
	  send_ping) starts execution after the call hangup procedure starts but before
	  it deletes the tasks in the scheduler.

	  The solution is to delete scheduled lagrq (and ping) task asynchronously
	  (i.e. schedule AST_SCHED_DEL for these tasks); By this, AST_SCHED_DEL will
	  be called in a new context (doesn't have callno locked).

	  This commit also cleans up the procedure of sending LAGRQ and PING.

	  main/sched.c: Do not assert when deleting non existant entry from scheduler.
	  This assert seems to be the reason for a lot of awkward code to avoid it.

	  ASTERISK-24983 #close
	  Reported by: Y Ateya

	  Change-Id: I03bec1fc8faacb89630269e935fa667c6d6c080c

2015-05-14 15:21 +0000 [7bf88eb60d]  Kevin Harwell <kharwell@digium.com>

	* audiohook.c: Difference in read/write rates caused continuous buffer resets

	  Currently, everytime a sample rate change occurs (on read or write) the
	  associated factory buffers are reset. If the requested sample rate on a
	  read differed from that of a write then the buffers are continually reset
	  on every read and write. This has the side effect of emptying the buffer,
	  thus there being no data to read and then write to a file in the case of
	  call recording.

	  This patch fixes it so that an audiohook_list's rate always maintains the
	  maximum sample rate among hooks and formats. Audiohook sample rates are
	  only overwritten by this value when slin native compatibility is turned on.
	  Also, the audiohook sample rate can only overwrite the list's sample rate
	  when its rate is greater than that of the list or if compatibility is
	  turned off. This keeps the rate from constantly switching/resetting.

	  ASTERISK-24944 #close
	  Reported by: Ronald Raikes

	  Change-Id: Idab4dfef068a7922c09cc631dda27bc920a6c76f

2015-05-13 09:55 +0000 [5ce54ed74a]  Matt Jordan <mjordan@digium.com>

	* res/res_http_websocket: Add a pre-session established callback

	  This patch updates http_websocket and its corresponding implementation
	  with a pre-session established callback. This callback allows for
	  WebSocket server consumers to be notified when a WebSocket connection is
	  attempted, but before we accept it. Consumers can choose to reject the
	  connection, if their application specific logic allows for it.

	  As a result, this patch pulls out the previously private
	  websocket_protocol struct and makes it public, as
	  ast_websocket_protocol. In order to preserve backwards compatibility
	  with existing modules, the existing APIs were left as-is, and new APIs
	  were added for the creation of the ast_websocket_protocol as well as for
	  adding a sub-protocol to a WebSocket server.

	  In particular, the following new API calls were added:
	  * ast_websocket_add_protocol2 - add a protocol to the core WebSocket
	    server
	  * ast_websocket_server_add_protocol2 - add a protocol to a specific
	    WebSocket server
	  * ast_websocket_sub_protocol_alloc - allocate a sub-protocol object.
	    Consumers can populate this with whatever callbacks they wish to
	    support, then add it to the core server or a specified server.

	  ASTERISK-24988
	  Reported by: Joshua Colp

	  Change-Id: Ibe0bbb30c17eec6b578071bdbd197c911b620ab2

2015-05-20 12:55 +0000 [ddb7cbef8e]  John Bigelow <jbigelow@digium.com>

	* res/res_resolver_unbound.c: Add missing include of signal.h

	  ASTERISK-25110 #close
	  Reported by: John Bigelow

	  Change-Id: I99a9d93f066f265357b647b8e99a75e45da5a39f

2015-05-06 21:18 +0000 [9c3c7797e5]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cel, cdr: Assigned separator for column name and values.

	  Use a separator string between column names and values for SQL sentences
	  instead of evaluating the separator to use each time.

	  This change adds a space after the comma in constructing SQL sentences.
	  Before the SQL was created like "INSERT INTO cdr(calldate,clid,dst"
	  without spaces between column name and values.

	  The files applied this change are cdr/cdr_adaptive_odbc.c, cdr/cdr_pgsql.c,
	  cel/cel_odbc.c

	  ASTERISK-25109 #close
	  Reported By: Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	  Change-Id: Ia5a1a161f5e26e1643703b30f8cc9cf0860cc7ea

2015-05-17 07:15 +0000 [d8698b7f3f]  Matt Jordan <mjordan@digium.com>

	* doxygen: Fix doxygen errors

	  This patch fixes a number of errors and warning messages in the doxygen
	  log. Specifically, it addresses:
	  * A number of files incorrectly places a '\brief' tag immediately after
	    a '\file' tag. Doing so emits a warning, as '\file' takes an optional
	    argument specifying which file the doxygen comment is for. As '\brief'
	    is not a file, doxygen was unamused.
	  * A grouping of Stasis Topics and Messages in rtp_engine.h was
	    incorrectly terminated. We now correctly terminate the grouping, which
	    prevents members of rtp_engine.h from showing up in the wrong group.
	  * Group indicators which are not part of the Stasis Topics and Messages
	    group were removed. Group indicators without an \addtogroup or
	    \ingroup have no meaning.

	  Change-Id: Ia1415ffec6767e27233ae1cae5ed5970de5656d4

2015-05-19 13:01 +0000 [d2e998cd68]  Corey Edwards <tensai@zmonkey.org>

	* main/sdp_srtp.c: allow SDP crypto tag to be up to 9 digits

	  ASTERISK-24887 #close
	  Reported by: Makoto Dei
	  Tested by: tensai

	  Change-Id: I6a96f572adb17f76b3acafe503a01c48eb5dd9bf
2015-05-14 22:05 +0000 [17129d2c29]  snuffy <snuffy22@gmail.com>

	* chan_pjsip: Fix crash during off-nominal when no endpoint specified.

	  Add missing return -1 when no endpoint name is specified.

	  ASTERISK-25086 #close
	  Reported by: snuffy

	  Change-Id: I9de76c2935a1f4e3f0cffe97a670106f5605e89e
2015-05-14 18:01 +0000 [5d93928175]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_config_wizard/config: Fix template processing

	  The config wizard was always pulling the first occurrence of
	  a variable from an ast_variable list but this gets the template
	  value from the list instead of any overridden value.  This patch
	  creates ast_variable_find_last_in_list() in config.c and updates
	  res_pjsip_config_wizard to use it instead of
	  ast_variable_find_in_list.  Now the overridden values, where they
	  exist, are used instead of template variables.

	  Updated test_config to test the new API.

	  ASTERISK-25089 #close

	  Reported-by: George Joseph <george.joseph@fairview5.com>
	  Tested-by: George Joseph <george.joseph@fairview5.com>
	  Change-Id: Ifa7ddefc956a463923ee6839dd1ebe021c299de4

2015-05-15 01:54 +0000 [e48d29054f]  snuffy <snuffy22@gmail.com>

	* cdr: Fix 'core show channel' CDR variable truncation.

	  When the new Bridging API was implemented, the workspace variable
	  changed to a malloc'd string, causing sizeof() to always be 8 (char).

	  Revert back to stored on stack string for workspace.

	  ASTERISK-25090 #close

	  Change-Id: I51e610ae87371df771ce7693a955510efb90f8f7
2015-05-10 09:55 +0000 [8f3f414d8c]  Alexander Traud (License 6520)

	* tcptls: Enable multiple TLS certificate chains (RSA+ECC+DSA) for server socket.

	  When a client connects to a server via SSL/TLS, the server commonly utilizes an
	  RSA key-pair. However, other such algorithms exist (i.e. DSA and ECDSA), and if
	  the server socket is configured with a certificate for either one of those, it
	  would lose its compatibility with RSA-only clients.

	  Now, the server socket can be configured with up to one RSA, ECDSA and DSA key
	  each. For example, if a client is not compatible with SHA-2 hashed certificates
	  like Nokia mobile phones, the server socket still can use RSA/SHA-1 for legacy
	  clients and ECDSA/SHA-2 for everyone else.

	  ASTERISK-24815 #close
	  Reported by: Alexander Traud
	  patches:
	    tls_rsa_ecc_dsa.patch uploaded by Alexander Traud (License 6520)

	  Change-Id: Iada5e00d326db5ef86e0af7069b4dfa1b979da9a

2015-05-14 17:12 +0000 [2415a14ce9]  Maciej Szmigiero <mail@maciej.szmigiero.name>

	* Add X.509 subject alternative name support to TLS certificate
	  verification.

	  This way one X.509 certificate can be used for hosts that
	  can be reached under multiple DNS names or for multiple hosts.

	  Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>

	  ASTERISK-25063 #close

	  Change-Id: I13302c80490a0b44c43f1b45376c9bd7b15a538f

2015-05-13 15:41 +0000 [3e89f01b55]  Jonathan Rose <jrose@digium.com>

	* Message.c: Clear message channel frames on cleanup

	  The message channel is a special channel that doesn't actually process frames.
	  However, certain actions can cause frames to be placed in the channel's read
	  queue including the Hangup application which is called on the channel after
	  each message is processed. Since the channel will continually be reused for
	  many messages, it's necessary to flush these frames at some point.

	  ASTERISK-25083 #close
	  Reported by: Jonathan Rose

	  Change-Id: Idf18df73ccd8c220be38743335b5c79c2a4c0d0f

2015-05-14 00:06 +0000 [0a46d43b9c]  Corey Farrell <git@cfware.com>

	* Fix potential crash after unload of func_periodic_hook or test_message.

	  These modules save a pointer to the context they create on load, and
	  use that pointer to destroy the context at unload.  It is not safe
	  to save this pointer, it is replaced during load of pbx_config,
	  pbx_lua or pbx_ael.

	  This change causes the modules to pass NULL to ast_context_destroy,
	  a safer way to perform the unregistration since it does not use
	  a pointer that could become invalid.

	  ASTERISK-25085 #close
	  Reported by: Corey Farrell

	  Change-Id: I6a00ec8e38046058f97dc703e1adcde9bf517835

2015-05-12 08:58 +0000 [478fb4a388]  Corey Farrell <git@cfware.com>

	* MALLOC_DEBUG: Replace WRAP_LIBC_MALLOC with ASTMM_LIBC.

	  There are 3 ways that calls directly to standard allocator functions can
	  be dealt with:
	  1. Block their use, cause them to generate an error.  This is the default.
	  2. Replace them with the Asterisk equivalent function calls.
	  3. Leave them alone.

	  This change allows one of these 3 options to be selected by any source.
	  The source just needs to define ASTMM_LIBC to ASTMM_BLOCK, ASTMM_REDIRECT,
	  or ASTMM_IGNORE to use option 1, 2 or 3 respectively.  Normally ASTMM_BLOCK
	  is the correct option, so it is default when ASTMM_LIBC is not defined.
	  In some cases when building 3rd party code it is desirable to have it use
	  Asterisk functions, without changing the whole source - ASTMM_REDIRECT
	  accomplishes this.  When using 3rd party libraries sometimes a static
	  inline function will make use of malloc or free.  In these cases it may
	  be unsafe to replace the allocator in the header, as it's possible the
	  memory could be freed by the library using standard allocators.  For
	  those cases ASTMM_IGNORE is needed.

	  Change-Id: I8afef4bc7f3b93914263ae27d3a5858b69663fc7

2015-05-05 19:49 +0000 [eec010829a]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* AST_MODULE_INFO: Format corrections to the usages of AST_MODULE_INFO macro.

	  Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723
2015-05-06 05:28 +0000 [46bb8449e8]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cel/cel_pgsql.c: Use the 'SEP' macro when appending a column name

	  When appending a column name to the sql buffer, the predicate, "if first is
	  non-null, use empty string; else, use comma", is identical to the 'SEP' macro
	  definition. Since they are the same, this patch replaces the redundant
	  predicate statement with the 'SEP' macro.

	  Change-Id: Ib8b6138b06a48381723108a05ab8752cb8700509
2015-05-12 17:45 +0000 [0d97d7cb94]  Jonathan Rose <jrose@digium.com>

	* app_voicemail: fix moving when old messages full

	  When completing voicemail playback of a message in the 'INBOX', the
	  message gets moved to the 'Old' messages folder. Without this patch, if
	  the 'Old' folder is already at its set limit, then the 'INBOX' message will
	  simply be deleted. With this patch, the flag to delete the message will be
	  removed if the save_to_folder function indicates that the message could
	  not be moved due to a full folder.

	  ASTERISK-25082 #close
	  Reported by: Jonathan Rose
	  Review: https://gerrit.asterisk.org/#/c/448/

	  Change-Id: I2be440a09f42e2d06d50975c40d1ad7f836ecb3f
2015-05-12 17:34 +0000 [0bb0d4a603]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi/sig_pri: Fix crash on ISDN call hangup collision.

	  If an ISDN call is hungup by both sides at the same time a crash could
	  happen.

	  * Added missing NULL checks for the owner channel after calling
	  pri_queue_pvt_cause_data() in two places.  Code after those calls need to
	  check the owner channel pointer for NULL before use because
	  pri_queue_pvt_cause_data() needs to do deadlock avoidance to lock the
	  owner and the owner may get hung up.

	  ASTERISK-21893 #close
	  Reported by:  Alexandr Gordeev

	  Change-Id: Ica3e266ebc7a894b41d762326f08653e1904bb9a

2015-05-06 08:31 +0000 [57386dcb67]  Corey Farrell <git@cfware.com>

	* Allow command-line options to override asterisk.conf.

	  Previous versions of Asterisk processed command-line options before
	  processing asterisk.conf.  This meant that if an option was set in
	  asterisk.conf, it could not be overridden with the equivelent command
	  line option.  This change causes Asterisk to process the command-line
	  twice.  First it processes options that are needed to load asterisk.conf,
	  then it processes the remaining options after the config is read.

	  This changes the function of -X slightly.  Previously using -X without
	  disabling execincludes in asterisk.conf caused #exec to be usable in any
	  config.  Now -X only enables #exec for the load of asterisk.conf, if it
	  is wanted in the rest of the system it must be enabled with execincludes
	  in asterisk.conf.  Updated 'asterisk -h' and 'man asterisk' to reflect
	  the limited function of -X.

	  ASTERISK-25042 #close
	  Reported by: Corey Farrell

	  Change-Id: I1450d45c15b4467274b871914d893ed4f6564cd7

2015-05-05 15:32 +0000 [52407088f8]  gtjoseph <george.joseph@fairview5.com>

	* sorcery: Add API to insert/remove a wizard to/from an object type's list

	  Currently you can 'apply' a wizard to an object type but the wizard
	  always goes at the end of the object type's wizard list.  This patch
	  adds a new ast_sorcery_insert_wizard_mapping function that allows
	  you to insert a wizard anyplace in the list.  I.E.  You could
	  add a caching wizard to an object type and place it before all
	  wizards.

	  ast_sorcery_get_wizard_mapping_count and
	  ast_sorcery_get_wizard_mapping were added to allow examination
	  of the mapping list.

	  ast_sorcery_remove_mapping was added to remove a mapping by name.

	  As part of this patch, the object type's wizard list was converted
	  from an ao2_container to an AST_VECTOR_RW.

	  A new test was added to test_sorcery for this capability.

	  ASTERISK-25044 #close

	  Change-Id: I9d2469a9296b2698082c0989e25e6848dc403b57

2015-05-12 01:31 +0000 [cc853dcf90]  Corey Farrell <git@cfware.com>

	* Fix processing of asterisk.conf debug=yes.

	  The code which reads asterisk.conf supports processing the debug
	  option with ast_true, but ast_true returns -1.  This causes debug
	  to still be off, convert to 1 so debug will be on as requested.

	  ASTERISK-25042
	  Reported by: Corey Farrell

	  Change-Id: I3c898b7d082d914b057e111b9357fde46bad9ed6

2015-05-10 02:26 +0000 [c624e4bae1]  Sebastian Kemper <sebastian_ml@gmx.net>

	* General: Fix recent menuselect-related cross compile regression

	  MAKE_MENUSELECT currently sets CC to CC, which is the compiler for the
	  target platform. But menuselect is to be run on the build system, so
	  BUILD_CC needs to be used instead - like it was in the past, before the
	  recent changes (https://reviewboard.asterisk.org/r/4370/). This is the
	  patch for ASTERISK-25074.

	  ASTERISK-25074 #close
	  Reported by: Sebastian Kemper
	  Tested by: Sebastian Kemper

	  Change-Id: I8a2b1fc5deb6ad2b80f49baca35b1b13d468ebf8
2015-05-01 12:22 +0000 [e6daafb8a6]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr_pgsql, cel_pgsql: Store maximum buffer size to prevent reallocation

	  The code previously used a fixed size of 512 for the SQL
	  queries. Depending on the size this may require it to grow.

	  This change makes it so if the buffer size does grow the size
	  is stored and next time the buffer will be large enough.

	  Change-Id: I55385899f1c06dee47e4274c2d21538037b2d895
2015-05-09 16:58 +0000 [87d8b36755]  gtjoseph <george.joseph@fairview5.com>

	* vector:  Add REMOVE, ADD_SORTED and RESET macros

	  Based on feedback from Corey Farrell and Y Ateya, a few new
	  macros have been added...

	  AST_VECTOR_REMOVE which takes a parameter to indicate if
	  order should be preserved.

	  AST_VECTOR_ADD_SORTED which adds an element to
	  a sorted vector.

	  AST_VECTOR_RESET which cleans all elements from the vector
	  leaving the storage intact.

	  Change-Id: I41d32dbdf7137e0557134efeff9f9f1064b58d14

2015-05-11 07:07 +0000 [e6ebddd9ae]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* pbx/pbx_spool: Fix issue when call files were executed too early

	  pbx_spool used to delete/move the call file upon successful outgoing
	  call completion, but did not delete it from in-memory list of files
	  (dirlist, used only when compiled with inotify/kqueue support).
	  That resulted in an extra attempt to process that filename after
	  retrytime seconds.
	  Then, if a new file with the same name appears that is scheduled
	  in future further than the completed one plus its retrytime,
	  then it gets executed earlier than expected.

	  This patch fixes remove_from_queue function to also remove the entry
	  from the dirlist.

	  ASTERISK-17069 #close
	  Reported by: Jeremy Kister

	  ASTERISK-24442 #close
	  Reported by: tootai

	  Change-Id: If9ec9b88073661ce485d6b008fd0b2612e49a28b

2015-05-01 23:43 +0000 [c61b146238]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr_pgsql: Use PQescapeStringConn for escaping names.

	  Use function PQescapeStringConn for escaping the name
	  of the table and schema instead of doing it manually.

	  Change-Id: I6709165e2d00463e9c813d24f17830ad4910b599
2015-05-10 07:37 +0000 [2ab5d22c0d]  Yousf Ateya <y.ateya@starkbits.com>

	* res_rtp_asterisk: Correction for the limit which detects that a packet is DTLS.

	  First byte of DTLS packet shall be in range 20-63, not 20-64. Refer to RFC
	  https://tools.ietf.org/html/rfc5764#section-5.1.2 for correct values.

	  Change-Id: Iae6fa0d72b37c36a27fe40686e0ae6fba3afec31

2015-05-10 08:36 +0000 [f82bd76e3c]  Joshua Colp <jcolp@digium.com>

	* dns_srv: Fix SRV sorting when records with priority zero exist with non-zero.

	  The DNS SRV sorting code currently has an issue when records with a priority
	  of zero exist with records of a non-zero priority. This occurs because the
	  sorting code considers zero to mean unset when in reality is a valid
	  value. If the current priority is zero it will get replaced with any remaining
	  record that has a priority of non-zero, until no records of those exist after
	  which the records of priority zero are handled.

	  This change makes it so that the priority of the first remaining record is
	  the current starting priority. There is also a small optimization to prevent
	  iterating records when the starting priority is already zero.

	  Change-Id: I103511f35b50428f770bd4db3ffef70fb6f82d35

2015-05-08 18:01 +0000 [1503d0c14c]  Alexandre Fournier <alexandre.fournier@kiplink.fr>

	* res_config_mysql: Fix broken column type checking

	  MySQL configuration engine contains a bug in require_mysql(). This
	  function is used for column type checking in tables. This bug only
	  affects DATETIME, DATE and FLOAT types.

	  It came from mixing the first condition (switch-case-like
	  if/then/else), to check the expected column type, with the second
	  condition, to check the actual column type against the expected column
	  type. Both conditions must be checked separately in order to avoid the
	  execution of the wrong block.

	  ASTERISK-18252 #comment This patch might fix the issue
	  Reported by: Gareth Blades

	  ASTERISK-25041 #close
	  Reported by: Alexandre Fournier
	  Tested by: Alexandre Fournier

	  Change-Id: I0b8bf7e68ab938be8e6525a249260cb648cb0bfa

2015-05-08 14:47 +0000 [5e361e1476]  Rusty Newton <rnewton@digium.com>

	* configs/basic-pbx: Modified main IVR to play new Allison prompt.

	  The main IVR was playing demo-congrats. I've switched it over to the
	  basic-pbx-ivr-main file that we added in core sounds 1.4.27. This prompt
	  has Allison prompting the user with the actual IVR menu.

	  ASTERISK-24892 #close

	  Change-Id: Ifb749616ff8e156a1031ddaddfcc9244767a095d

2015-05-08 12:30 +0000 [2d4dc0c963]  Corey Farrell <git@cfware.com>

	* Fix error's produced by astmm.h when standard allocators are used.

	  astmm.h includes defines that are meant to cause error's when standard
	  allocators (malloc, calloc, free, etc) are used.  It actually only
	  causes a warning, which is not always caught on certain sources.  In
	  modules this unknown symbol is not detected until runtime, where the
	  module fails to load.  This modifies the define's so that using one
	  of the blocked functions will cause a compile error regardless of
	  CFLAGS.

	  Moved spandsp header includes to before asterisk.h so the static inline
	  functions can continue using malloc and free.  Although these functions
	  are never called and optimized away, the updated replacement macro's
	  would still cause a failure.

	  Change-Id: I532640aca0913ba9da3b18c04a0f010ca1715af5

2015-05-08 10:39 +0000 [63c71c9f4a]  Sean Bright <sean@malleable.com>

	* res_rtp_asterisk: Issue ERROR if res_srtp is not found.

	  While trying to get WebRTC working with chan_pjsip, I was running
	  into the following error:

	      Attempted to set an invalid DTLS-SRTP configuration on RTP
	      instance...

	  Josh helpfully pointed out that res_srtp.so might not be loaded, and
	  sure enough, it wasn't. This patch adds a ERROR indiciating as much
	  to hopefully help others having a similar problem.

	  Change-Id: I13aa477b47b299876728a21b130998a0ea6cd19f

2015-05-07 17:49 +0000 [60bf9ed91a]  Rusty Newton <rnewton@digium.com>

	* sounds: Add Swedish sounds to Makefile and XML

	  Added the necessary lines to the Makefile and sounds.xml so we'll have the
	  Swedish sounds in all available formats in menuselect.

	  See also: Swedish sounds were added into the core sounds release 1.4.27.

	  ASTERISK-24744 #close

	  Reported by: Tove Hjelm
	  Tested by: Rusty Newton

	  Change-Id: Ib6f4fd177afd1667b2402735034001d4d055a908

2015-05-08 10:30 +0000 [f93b3a22d6]  Corey Farrell <git@cfware.com>

	* Fix crash in codec_lpc10 when MALLOC_DEBUG is enabled.

	  This switches codecs/lpc10/lpcini.c back to including "asterisk.h"
	  instead of <stdlib.h>.  lpcini.c allocates memory that is freed by
	  codec_lpc10.c, so it is important to use MALLOC_DEBUG allocator.
	  Added #define WRAP_LIBC_MALLOC to the start of the source to prevent
	  runtime symbol link error's.

	  Change-Id: I74f63fd09fdeb673ee7753122c3bb4722ab6e1ac

2015-05-07 14:54 +0000 [cf637f2510]  gtjoseph <george.joseph@fairview5.com>

	* doc: Make progdocs play nice with git

	  Moved contrib/asterisk-ng-doxygen to doc/asterisk-ng-doxygen.in

	  Changed /Makefile to copy asterisk-ng-doxygen.in to
	  asterisk-ng-doxygen then modify it with version instead of
	  modifying asterisk-ng-doxygen directly.  Updated clean
	  targets as well.

	  Updated /.gitignore and doc/.gitignore.

	  Change-Id: I38712d3e334fa4baec19d30d05de8c6f28137622

2015-05-04 14:43 +0000 [b885f719bf]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* contrib/editors: Fix vim syntax highlighting of comments in config files

	   * Added a lookbehind to one-line comment matcher to skip escaped
	     semicolons.
	   * Added support for block comments.

	  Change-Id: Id17dfaeda8ed4be572e8107a0c010066584aaee7

2015-05-06 13:24 +0000 [e33682cae2]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_exten_state: Fix race condition between sending NOTIFY and termination

	  The res_pjsip_exten_state module currently has a race condition between
	  processing the extension state callback from the PBX core and processing
	  the subscription shutdown callback from res_pjsip_pubsub. There is currently
	  no synchronization between the two. This can present a problem as while
	  the SIP subscription will remain valid the tree it points to may not.
	  This is in particular a problem as a task to send a NOTIFY may get queued
	  which will try to use the tree that may no longer be valid.

	  This change does the following to fix this problem:

	  1. All access to the subscription tree is done within the task that
	  sends the NOTIFY to ensure that no other thread is modifying or
	  destroying the tree. This task executes on the serializer for the
	  subscriptions.

	  2. A reference to the subscription serializer is kept to ensure it
	  remains valid for the lifetime of the extension state subscription.

	  3. The NOTIFY task has been changed so it will no longer attempt
	  to send a NOTIFY if the subscription has already been terminated.

	  ASTERISK-25057 #close
	  Reported by: Matt Jordan

	  Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643

2015-05-05 20:22 +0000 [c886be5df2]  gtjoseph <george.joseph@fairview5.com>

	* vector:  Additional enhancements and fixes

	  After using the new vector stuff for real I found...

	  A bug in AST_VECTOR_INSERT_AT that could cause a seg fault.

	  The callbacks needed to be closer to ao2_callback in behavior
	  WRT to CMP_MATCH and CMP_STOP behavior and the ability to return
	  a vector of matched entries.

	  A pre-existing issue with APPEND and REPLACE was also fixed.

	  I also added a new macro to test.h that acts like ast_test_validate
	  but also accepts a return code variable and a cleanup label.  As well
	  as printing the error, it sets the rc variable to AST_TEST_FAIL and
	  does a goto to the specified label on error.  I had a local version
	  of this in test_vector so I just moved it.

	  ASTERISK-25045

	  Change-Id: I05e5e47fd02f61964be13b7e8942bab5d61b29cc

2015-05-06 17:37 +0000 [1f5db1c7e3]  Kevin Harwell <kharwell@digium.com>

	* res_stasis_snoop: Spying on a single direction continually increases CPU

	  Creating a snoop channel in ARI and spying only on a single direction (in or
	  out) results in CPU utilization continually increasing until the CPU is fully
	  consumed. This occurs because frames are being put in the opposing direction's
	  slin factory queue, but not being removed.

	  Fixed the problem by always reading and disposing of frames from the opposite
	  queue of the direction selected.

	  ASTERISK-24938 #closes

	  Change-Id: I935bfd15f1db958f364d9d6b3b45582c0113dd60

2015-05-06 16:00 +0000 [7103b374ef]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi: Improve force_restart_unavailable_chans option description.

	  ASTERISK-25034
	  Reported by: Richard Mudgett

	  Change-Id: I1ff8f02124d2f4abd632a050da52c64285bb7f30

2015-05-06 04:32 +0000 [d2e2271874]  Joshua Colp <jcolp@digium.com>

	* manager: Fix build due to missing variable usage.

	  Change-Id: I26d4d2cb9cee924632ff59ef0b30a7e6a1e2b00d

2015-05-04 20:11 +0000 [6b40bbf5bb]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* main/manager.c: Bugfix sort action_manager by alphabetically

	  Fix the alphabetic order added on ast_manager_register_struct. The order
	  for struct manager_action added is not working, this change fixes the
	  problem.

	  Change-Id: I149da0cd06c3c4445d7516cc303358e9f26f8b4b

2015-05-05 18:17 +0000 [6c4d1c3223]  Richard Mudgett <rmudgett@digium.com>

	* features: Fix crash when transferee hangs up during DTMF attended transfer.

	  A crash happens with this sequence of steps:
	  1) Party A is connected to party B.
	  2) Party B starts a DTMF attended transfer.
	  3) Party A hangs up while party B is dialing party C.

	  When party A hangs up the bridge that party A and party B are in is
	  dissolved and party B is kicked out of the bridge.  When party B finishes
	  dialing party C he attempts to move to the new bridge with party C.  Since
	  party B is no longer in a bridge the attempted move dereferences a NULL
	  bridge_channel pointer and crashes.

	  * Made the hold(), unhold(), ringing(), and the bridge_move() functions
	  tolerant of the channel not being in a bridge.  The assertion that party B
	  is always in a bridge is not true if the bridged peer of party B hangs up
	  and dissolves the bridge.  Being tolerant of not being in a bridge allows
	  the peer hangup stimulus to be processed by the FSM.

	  * Made the bridge_move() function return void since where the return value
	  for a failed move was checked generated a FSM coding ERROR message for a
	  normal off-nominal condition.

	  * Eliminated most uses of RAII_VAR in bridge_basic.c.

	  ASTERISK-25003 #close
	  Reported by: Artem Volodin

	  Change-Id: Ie2c1b14e5e647d4ea6de300bf56d69805d7bcada

2015-05-05 14:48 +0000 [90bfc02e84]  Ivan Poddubny <ivan.poddubny@gmail.com>

	* app_queue: Fix queue_log EXITWITHTIMEOUT containing only 1 parameter

	  This patch fixes EXITWITHTIMEOUT queue_log entry to always come with 3
	  parameters: position, original position and waiting time.

	  ASTERISK-25038 #close
	  Reported by: Etienne Lessard

	  Change-Id: I0c62045922e26bee2125e93aee1dee17eee79618

2015-05-05 13:34 +0000 [bebf0b9b27]  Joshua Colp <jcolp@digium.com>

	* chan_unistim: Fix build failure due to ACL changes.

	  Change-Id: I57081045c72b9fcf12d5c84493278f9272c31b32

2015-05-05 11:35 +0000 [247fef6653]  Alexander Traud (License 6520)

	* tcptls: Avoiding ERR_remove_state in OpenSSL.

	  ERR_remove_state was deprecated with OpenSSL 1.0.0 and was replaced by 
	  ERR_remove_thread_state. ERR_load_SSL_strings and ERR_load_BIO_strings were 
	  called by SSL_load_error_strings already and got removed. These changes allow 
	  OpenSSL forks like BoringSSL to be used with Asterisk.

	  ASTERISK-25043 #close
	  Reported by: Alexander Traud
	  patches:
	    asterisk_with_BoringSSL.patch uploaded by Alexander Traud (License 6520)

	  Change-Id: If1c0871ece21a7e0763fafbd2fa023ae49d4d629
2015-05-05 09:47 +0000 [c541923ac3]  Corey Farrell <git@cfware.com>

	* res_ari_bridges: Add missing dependencies.

	  Missed this module in the previous commit.  res_ari_bridges uses symbols
	  from res_stasis_playback and res_stasis_recording.

	  ASTERISK-25027 #close
	  Reported by: Corey Farrell

	  Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f

2015-05-05 09:27 +0000 [8a3e93a349]  Corey Farrell <git@cfware.com>

	* pbx_config: Register manager actions with module version of macro.

	  Switch manager actions in pbx_config to use the registration macro that
	  passes the module pointer, allowing pbx_config reference to be bumped
	  while the manager actions run.

	  ASTERISK-25061 #close
	  Reported by: Corey Farrell

	  Change-Id: I422c50dd74814616ac10c5e9c6598a0b1bc2c44e

2015-05-01 22:14 +0000 [cb79b8ab80]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cel_pgsql: Add support for setting schema

	  Add feature to set optional schema parameter on configuration file via
	  'schema' setting.

	  Fix query to get columns from table while considering schema. If in
	  the database there exists two tables with same name in distinct schemas
	  it will return an error when inserting record.

	  ASTERISK-24967 #close

	  Change-Id: I691fd2cbc277fcba10e615f5884f8de5d8152f2c

2015-05-04 12:16 +0000 [11f650c6ac]  Joshua Colp <jcolp@digium.com>

	* stasis: Fix dial masquerade datastore lifetime

	  A recent change went into Asterisk which added reference counts to the
	  channels stored in a dial masquerade datastore. Unfortunately this
	  included a reference to the caller in a dialing operation. While all
	  of the dialed targets have the datastore removed from them upon dialing
	  completion this did not occur for the caller, causing it to have a
	  reference to itself that could go never go away (as it depended on
	  the destruction of the datastore which only happened when the channel
	  was destroyed). This resulted in the caller channel remaining on the
	  system despite it having hung up.

	  This change does the following to fix this issue:

	  1. The dial masquerade datastore is now removed from the caller upon
	  dialing completion, just like the dialed targets.
	  2. Upon destruction of the caller all the dialed targets are also
	  removed from the dial masquerade datastore (just in case).
	  3. The reference to the caller has been removed as it should not be
	  possible for the datastore to now be valid/useful after the lifetime
	  of the caller has ended.

	  ASTERISK-25025 #close

	  Change-Id: I1ef4ca5ca04980028604cc2af5d2992ac3431b3f

2015-04-21 17:27 +0000 [a24ce38e5e]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr_adaptive_odbc: Add ability to set character for quoted identifiers.

	  Added the ability to set the character to quote identifiers. This
	  allows adding the character at the start and end of table and column
	  names. This setting is configurable for cdr_adaptive_odbc via the
	  quoted_identifiers in configuration file cdr_adaptive_odbc.conf.

	  ASTERISK-25006

	  Change-Id: I0b9a56b79ca13a727a803d88ed3b8643e37632b8

2015-05-04 22:57 +0000 [39cf642d40]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr: standardizes tab for options of AST_MODULE_INFO

	  Change-Id: I3c6de30b4859717873100092a7c06e206713a301

2015-05-04 16:41 +0000 [df6c1d755f]  Corey Farrell <git@cfware.com>

	* CLI: Enable automatic references to modules.

	  * Pass module to ast_cli_register and ast_cli_register_multiple.
	  * Add a module reference before executing any CLI callback, remove
	    the reference when complete.

	  ASTERISK-25049 #close
	  Reported by: Corey Farrell

	  Change-Id: I7aafc7c9f2b912918f28fe51d51e9e8a755750e3

2015-05-04 14:26 +0000 [a8bfa9e104]  Corey Farrell <git@cfware.com>

	* Modules: Make ast_module_info->self available to auxiliary sources.

	  ast_module_info->self is often needed to register items with the core.  Many
	  modules have ad-hoc code to make this pointer available to auxiliary sources.
	  This change updates the module build process to make the needed information
	  available to all sources in a module.

	  ASTERISK-25056 #close
	  Reported by: Corey Farrell

	  Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815

2015-05-01 19:25 +0000 [6d5941297b]  gtjoseph <george.joseph@fairview5.com>

	* vector:  Traversal, retrieval, insert and locking enhancements

	  Renamed AST_VECTOR_INSERT to AST_VECTOR_REPLACE because it really
	  does replace not insert.  The few users of AST_VECTOR_INSERT were
	  refactored.  Because these are macros, there should be no ABI
	  compatibility issues.

	  Added AST_VECTOR_INSERT_AT that actually inserts an element into the
	  vector at a specific index pushing existing elements to the right.

	  Added AST_VECTOR_GET_CMP that can retrieve from the vector based
	  on a user-provided compare function.

	  Added AST_VECTOR_CALLBACK function that will execute a function
	  for each element in the vector.  Similar to ao2_callback and
	  ao2_callback_data functions although the vector callback can take
	  a variable number of arguments.  This should allow easy migration
	  to a vector where a container might be too heavy.

	  Added read/write locked vector and lock manipulation macros.

	  Added unit tests.

	  ASTERISK-25045 #close

	  Change-Id: I2e07ecc709d2f5f91bcab8904e5e9340609b00e0

2015-05-03 13:55 +0000 [4f4aaa0c30]  Corey Farrell <git@cfware.com>

	* main/test.c: Add test to verify there were no registration errors.

	  This adds a test that will fail if any test failed to register. Also fail
	  if any test registration produced a warning about missing a leading or
	  trailing slash.

	  ASTERISK-25053 #close
	  Reported by: Corey Farrell

	  Change-Id: I93e50b8fcbcfa7f1f5b41b2c44a51685c09529c3

2015-04-21 11:52 +0000 [ebe371357e]  Martin Tomec <tomec.martin@gmail.com>

	* res_odbc: Use negative connection cache for all connections

	  Apply the negative connection cache setting to all connections,
	  even those that are not pooled. This ensures that the connection
	  will not be  re-established before the negative connection cache
	  time is met.

	  ASTERISK-22708 #close

	  Change-Id: I431cc2e8584ab0b6908b3523d0a0e18c9a527271
2015-05-03 21:03 +0000 [981084f08c]  Corey Farrell <git@cfware.com>

	* Format Interfaces: Prevent unload except by shutdown.

	  Format interfaces cannot be unregistered, so the modules that provide them
	  need to be held open except by shutdown.

	  ASTERISK-25054 #close
	  Reported by: Corey Farrell

	  Change-Id: Iadbd9675bf0d30b8fded5a739b163db3ea2db8f3

2015-05-03 20:28 +0000 [75c0aa6979]  Matt Jordan <mjordan@digium.com>

	* contrib/ast-db-manage: Add Postgres ENUM type support in auto DTMF mode update

	  The upgrade script for auto DTMF mode (31cd4f4891ec) added in 88b0fa7755
	  failed to add ENUM support for Postgres databases. This requires a
	  specific import from the sqlalchemy.dialects.postgresql package. This
	  patch corrects this error, which allows for Postgres update scripts to
	  be generated.

	  ASTERISK-24706

	  Change-Id: I4742ac8efa533cd6f18e0bdd907b339a9aedf015

2015-05-03 13:36 +0000 [1368dae773]  Corey Farrell <git@cfware.com>

	* main/presencestate.c: Add trailing slash to test category.

	  ASTERISK-25053
	  Reported by: Corey Farrell

	  Change-Id: I8c0375dd0818747b2d2e1ceaea87bfbeb2daf8d4

2015-04-20 13:03 +0000 [305ce3defd]  Diederik de Groot <ddegroot@talon.nl>

	* Update configure.ac/Makefile for clang

	  Created autoconf/ast_check_raii.m4: contains AST_CHECK_RAII which
	  checks compiler requirements for RAII:
	  gcc: -fnested-functions support
	  clang: -fblocks (and if required -lBlocksRuntime)
	  The original check was implemented in configure.ac and now has it's
	  own file. This function also sets C_COMPILER_FAMILY to either gcc or
	  clang for use by makefile

	  Created autoconf/ast_check_strsep_array_bounds.m4 (contains
	  AST_CHECK_STRSEP_ARRAY_BOUNDS):
	  which checks if clang is able to handle the optimized strsep & strcmp
	  functions (linux). If not, the standard libc implementation should be
	  used instead. Clang + the optimized macro's work with:
	  strsep(char *, char []), but not with strsepo(char *, char *).
	  Instead of replacing all the occurences throughout the source code,
	  not using the optimized macro version seemed easier

	  See 'define __strcmp_gc(s1, s2, l2) in bits/string2.h':
	  llvm-comment: Normally, this array-bounds warning are suppressed for
	  macros, so that unused paths like the one that accesses __s1[3] are
	  not warned about.  But if you preprocess manually, and feed the
	  result to another instance of clang, it will warn about all the
	  possible forks of this particular if statement. Instead of switching
	  of this optimization, another solution would be to run the preproces-
	  sing step with -frewrite-includes, which should preserve enough
	  information so that clang should still be able to suppress the diag-
	  nostic at the compile step later on.

	  See also "https://llvm.org/bugs/show_bug.cgi?id=20144"
	  See also "https://llvm.org/bugs/show_bug.cgi?id=11536"

	  Makefile.rules: If C_COMPILER_FAMILY=clang then add two warning
	  suppressions:
	  -Wno-unused-value
	  -Wno-parentheses-equality
	  In an earlier review (reviewboard: 4550 and 4554), they were deemed a
	  nuisace and less than benefitial.

	  configure.ac:
	  Added AST_CHECK_RAII() see earlier
	  Added AST_CHECK_STRSEP_ARRAY_BOUNDS() see earlier
	  Removed moved content

	  ASTERISK-24917
	  Change-Id: I12ea29d3bda2254ad3908e279b7effbbac6a97cb

2015-04-28 04:49 +0000 [8886b724ae]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr/cdr_csv.c: Add a new option to enable columns added in Asterisk 1.8

	  This patch adds a new option to cdr.conf, 'newcdrcolumns', that will handle CDR
	  columns added in Asterisk 1.8. The columns are:
	   * peeraccount
	   * linkedid
	   * sequence
	  When enabled, the columns in the database entry will be populated with the data
	  from the CDR.

	  ASTERISK-24976 #close

	  Change-Id: I51a57063f4ae5e194a9d933a8df45dc8a4534f0b
2015-05-03 04:39 +0000 [94532b2c22]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* main/asterisk.c: Update Asterisk copyright year

	  Change-Id: I5e75d7f7e2c096d74edd9e8735268a894f4b93ab

2015-05-03 04:09 +0000 [2ed5e6a9ba]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* utils: Remove trailing whitespace

	  Change-Id: I4644f43a6a1ca9b5130cd2a6746772b888eb4f7a

2015-05-02 18:58 +0000 [c3ec5da156]  Corey Farrell <git@cfware.com>

	* Remove unneeded uses of optional_api providers.

	  A few cases exist where headers of optional_api provders are included but
	  not needed.  This causes unneeded calls to ast_optional_api_use.

	  * Don't include optional_api.h from sip_api.h.
	  * Move 'struct ast_channel_monitor' to channel.h.
	  * Don't include monitor.h from chan_sip.c, channel.c or features.c.

	  The move of struct ast_channel_monitor is needed since channel.c depends on
	  it.  This has no effect on users of monitor.h since channel.h is included
	  from monitor.h.

	  ASTERISK-25051 #close
	  Reported by: Corey Farrell

	  Change-Id: I53ea65a9fc9693c89f8bcfd6120649bfcfbc3478

2015-05-02 02:15 +0000 [44bbdbe3a4]  Corey Farrell <git@cfware.com>

	* res_pjsip_dlg_options: Fix MODULEINFO section.

	  Removed the extra space before "MODULEINFO" in res_pjsip_dlg_options.
	  This extra space prevented any of the dependencies from being seen by
	  menuselect, so building with default options would fail if PJSIP was
	  not installed.

	  This also makes the tool that extracts information for menuselect
	  tolerant of multiple spaces in the future.

	  ASTERISK-25033 #close
	  Reported by: Peter Whisker

	  Change-Id: Iccd54846f70c4a7a50cb5bf70b7bb5cb4bab3698

2015-05-01 19:50 +0000 [e4f0a55f7f]  D Tucny <d@tucny.com>

	* term: send proper reset sequence when black background is forced

	  When using the force black background command-line option or configuration
	  option an invalid reset sequence is sent following a coloured output item 
	  in the CLI, the result is that the colour is not 'turned off' and continues
	  until the next non-default coloured text output.

	  A reset sequence is already defined in term.c, but the ast_term_reset
	  function doesn't use it, instead building it's own invalid sequence and 
	  returning that.

	  This patch changes that behaviour, removing the building of a reset sequence
	  and instead using the pre-built constant 'enddata' which is a suitable reset
	  sequence for this purpose.

	  ASTERISK-24896 #close
	  Reported by: Dan Tucny

	  Change-Id: I56323899123ae3264900389cae1f5b252aa3bf43
2015-05-01 13:22 +0000 [8f3cee1258]  Corey Farrell <git@cfware.com>

	* Astobj2: Fix initialization order of refdebug and AO2_DEBUG.

	  This ensures that refdebug is initialized before AO2_DEBUG if
	  both are enabled, since AO2_DEBUG allocates a container.

	  This change also makes AO2_DEBUG initialization critical, a
	  failure will abort Asterisk startup.  This is needed since
	  the failure would be caused by reg_containers allocation
	  failure, and that would result in a segmentation fault by
	  ao2_container_register later in startup.

	  ASTERISK-25048 #close
	  Reported by: Corey Farrell

	  Change-Id: I9a243ea3fc5653b48b931ba6d61971cb2e530244

2015-04-29 14:49 +0000 [7ac28be04b]  Matt Jordan <mjordan@digium.com>

	* main/pbx: Improve performance of dialplan reloads with a large number of hints

	  The PBX core maintains two hash tables for hints: a container of the
	  actual hints (hints), along with a container of devices that are watching that
	  hint (hintdevices). When a dialplan reload occurs, each hint in the hints
	  container is destroyed; this requires a lookup in the container of devices to
	  find the device => hint mapping object. In the current code, this performs an
	  ao2_callback, iterating over each of the device to hint objects in the
	  hintdevices container. For a large number of hints, this is extremely
	  expensive: dialplan reloads with 20000 hints could take several minutes
	  in just this phase.

	  This patch improves the performance of this step in the dialplan reloads
	  by caching which devices are watching a hint on the hint object itself.
	  Since we don't want to create a circular reference, we just cache the
	  name of the device. This allows us to perform a smarter ao2_callback on
	  the hintdevices container during hint removal, hashing on the name of the
	  device and returning an iterator to the matching names. The overall
	  performance improvement is rather large, taking this step down to a number of
	  seconds as opposed to minutes.

	  In addition, this patch also registers the hint containers in the PBX
	  core with the astobj2 library. This allows for reasonable debugging to
	  hash collisions in those containers.

	  ASTERISK-25040 #close
	  Reported by: Matt Jordan

	  Change-Id: Iedfc97a69d21070c50fca42275d7b3e714e59360

2015-04-30 15:54 +0000 [6b208d8c3b]  Corey Farrell <git@cfware.com>

	* Sample Configs: Fix syntax error in pjsip.conf

	  The sample pjsip.conf has a few comment lines that are missing the
	  semicolons at the start of the comment, causing the config to fail
	  load.

	  Change-Id: I776a38c916a7df7ee3e072fd0b21dbf4cc457352

2015-04-30 15:20 +0000 [dc23204aca]  Mark Michelson <mmichelson@digium.com>

	* Prevent potential crash on blond transfer.

	  Scenario:
	  Alice calls Bob. Bob performs a blond transfer to Carol. Carol rejects
	  the incoming call (or some other immediate circumstance causes Carol not
	  to answer the call)

	  What occurs in this case is that when the bridge between Alice and Bob
	  breaks, Alice is told to masquerade into Bob's channel that had placed
	  the call to Carol. The actual masquerade goes down without a hitch.
	  However, a channel fixup callback that attempts to publish dial events
	  over Stasis has a crash. The reason for this crash is that the datastore
	  on Bob's channel that placed the outbound call to Carol only had a bare
	  pointer to Carol's channel. Since Carol rejected the incoming call,
	  Carol's channel has been hung up and freed, meaning accessing her
	  channel results in a crash.

	  The fix here is simple. The dial fixup code has been altered to hold
	  references to the involved channels and to drop those references when
	  freeing data.

	  ASTERISK-25025 #close
	  Reported by Chet Stevens

	  Change-Id: I54eedda207b8ec7a69263353b43abe5746aea197

2015-04-30 14:40 +0000 [47fa2ad10b]  Corey Farrell <git@cfware.com>

	* Build System: Fix issue with addons moduleinfo.

	  The build system now scans additional sources when generating
	  moduleinfo for menuselect.  Unfortunately the extra sources
	  for format_mp3 only exist if downloaded.

	  Use the Makefile macro 'wildcard' to allow moduleinfo generator
	  to ignore sources that do not exist.

	  Change-Id: I596604713b7345ce994f32197f8f6bfd9bcf4170

2015-04-30 13:42 +0000 [bb6ddb3dc8]  Joshua Colp <jcolp@digium.com>

	* res_ari_device_states: Fix dependency on res_stasis_device_state.

	  The res_ari_device_states module depends on res_stasis_device_state,
	  not res_stasis_device_states.

	  Change-Id: I26e02ad37f9e36bcc859867e2fad1b90452ec3de

2015-04-28 17:00 +0000 [11ffcf662f]  Mark Michelson <mmichelson@digium.com>

	* Restrict functionality when ACLs are misconfigured.

	  This patch has two main purposes:

	  1) Improve warning messages when ACLs are configured improperly.
	  2) Prevent misconfigured ACLs from allowing potentially unwanted
	  traffic.

	  To acomplish point (2) in most cases, whatever configuration object that
	  the ACL belonged to was not allowed to load.

	  The one exception is res_pjsip_acl. In that case, ACLs are their own
	  configuration object. Furthermore, the module loading code has no
	  indication that a ACL configuration had a failure. So the tactic taken
	  here is to create an ACL that just blocks everything.

	  ASTERISK-24969
	  Reported by Corey Farrell

	  Change-Id: I2ebcb6959cefad03cea4d81401be946203fcacae

2015-04-29 14:29 +0000 [03c51cf525]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi: Add the chan_dahdi.conf force_restart_unavailable_chans option.

	  Some telco switches occasionally ignore ISDN RESTART requests.  The fix
	  for ASTERISK-19608 added an escape clause for B channels in the restarting
	  state if the telco ignores a RESTART request.  If the telco fails to
	  acknowledge the RESTART then Asterisk will assume the telco acknowledged
	  the RESTART on the second call attempt requesting the B channel by the
	  telco.  The escape clause is good for dealing with RESTART requests in
	  general but it does cause the next call for the restarting B channel to be
	  rejected if the telco insists the call must go on that B channel.

	  chan_dahdi doesn't really need to issue a RESTART request in response to
	  receiving a cause 44 (Requested channel not available) code.  Sending the
	  RESTART in such a situation is not required (nor prohibited) by the
	  standards.  I think chan_dahdi does this for historical reasons to deal
	  with buggy peers to get channels unstuck in a similar fashion as the
	  chan_dahdi.conf resetinterval option.

	  * Add the chan_dahdi.conf force_restart_unavailable_chans compatability
	  option that when disabled will prevent chan_dahdi from trying to RESTART
	  the channel in response to a cause 44 code.

	  ASTERISK-25034 #close
	  Reported by: Richard Mudgett

	  Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65
2015-04-29 21:54 +0000 [556653d937]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr/cdr_csv.c: Refactor, function to write content of csv file.

	  Create a function for write content of CDR on csv files. Before used same
	  code for write two distinct files (account and master cdr) instead use a
	  function for thats.

	  Reduced to one lock when files are written.

	  Change-Id: Idce707f4c108083252e0aeb948f421d924953e65

2015-04-30 06:04 +0000 [80aa9aee5d]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_outbound_registration: Fix double unref on error return.

	  When the PJSIP pjsip_regc_send function is invoked and an error
	  status returned the caller currently decrements the reference count
	  of the client state that it just incremented, assuming the
	  registration callback would not have been invoked. In practice
	  this is not correct. If the failure happens after the transaction
	  has been set up the callback will still be invoked. This will
	  cause the reference count to be incorrectly decremented twice, once
	  by the registration callback and second by the caller of
	  pjsip_regc_send.

	  This change makes it so that whether the callback is invoked or
	  not is known by the caller of pjsip_regc_send. Depending on
	  this it can know whether it is responsible for decrementing the
	  reference count of the client state or not.

	  ASTERISK-25037 #close
	  Reported by: Joshua Colp

	  Change-Id: I749dc12f3a22115c49c5d7d95ff42a5fa45319de

2015-04-30 02:07 +0000 [7ff3b2d479]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* include/asterisk/channel.h: Fix typo

	  Change-Id: Ie584b85e16a94c255e60d0b1732ef9686464fef3

2015-04-29 16:15 +0000 [39d3e1ef6e]  Matt Jordan <mjordan@digium.com>

	* main/rtp_engine: Fix DTLS double-free introduced by 0b6410c4f8

	  The patch in 0b6410c4f8 did correctly fix a memory leak of the DTLS
	  structures in the RTP engine. However, when a 'core reload' is issued, a
	  double free of the memory pointed to by the char *'s in the DTLS
	  configuration struct can occur, as ast_rtp_dtls_cfg_free does not set
	  the pointers to NULL when they are freed.

	  This patch sets those pointers to NULL, preventing a second call to
	  ast_rtp_dtls_cfg_free from corrupting memory.

	  ASTERISK-25022

	  Change-Id: I820471e6070a37e3c26f760118c86770e12f6115

2015-04-29 13:05 +0000 [5d0c182885]  Kevin Harwell <kharwell@digium.com>

	* res_fax: allow 2400 transmission rate according to v.27ter standard

	  A previous set of patches (see: ASTERISK-22790 & ASTERISK-23231) made it so
	  a v.27 modem was not allowed to have a minimum transmission rate of 2400 bits
	  per second. This reverts all or some of those patches since according to the
	  v.27ter standard a rate of 2400 bits per second is also supported.

	  One of the original patches also added 9600 bits per second support for v.27.
	  This patch also removes that since v.27ter only supports 2400/4800 bits per
	  second.

	  Also, since Asterisk specifically supports v.27ter the enum was renamed to
	  better reflect this.

	  ASTERISK-24955 #close
	  Reported by: Matt Jordan

	  Change-Id: I4b9dfb6bf7eff08463ab47ee1a74224f27cae733

2015-04-28 23:35 +0000 [c9c03998cc]  Corey Farrell <git@cfware.com>

	* Astobj2: Add ao2_weakproxy_ref_object function.

	  This function allows code to run ao2_ref against the real
	  object associated with a weakproxy.  It is useful when
	  all of the following conditions are true:
	  * You have a pointer to weakproxy.
	  * You do not have or need a pointer to the real object.
	  * You need to ensure the real object exists and is not
	    destroyed during a process.

	  In this case it's wasteful to store a pointer to the real
	  object just for the sake of releasing it later.

	  Change-Id: I38a319b83314de75be74207a8771aab269bcca46

2015-04-27 16:13 +0000 [4f1db2070d]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_outbound_registration: Don't fail on delayed processing.

	  Odd behaviors have been observed during outbound registrations. The most
	  common problem witnessed has been one where a request with
	  authentication credentials cannot be created after receiving a 401
	  response. Other behaviors include apparently processing an incorrect SIP
	  response.

	  Inspecting the code led to an apparent issue with regards to how we
	  handle transactions in outbound registration code. When a response to a
	  REGISTER arrives, we save a pointer to the transaction and then push a
	  task onto the registration serializer. Between the time that we save the
	  pointer and push the task, it's possible for the transaction to be
	  destroyed due to a timeout. It's also possible for the address to be
	  reused by the transaction layer for a new transaction.

	  To allow for authentication of a REGISTER request to be authenticated
	  after the transaction has timed out, we now hold a reference to the
	  original REGISTER request instead of the transaction. The function for
	  creating a request with authentication has been altered to take the
	  original request instead of the transaction where the original request
	  was sent.

	  ASTERISK-25020
	  Reported by Mark Michelson

	  Change-Id: I756c19ab05ada5d0503175db9676acf87c686d0a
2015-04-29 10:46 +0000 [ed5715eb39]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_config: Fix build issue due to syntax error.

	  Change-Id: Ic8322f04e37842848ad72cf2871bd0378f67c4ac

2015-04-29 06:46 +0000 [f226bd6f60]  Corey Farrell <git@cfware.com>

	* ARI: Fix missing dependencies.

	  ARI modules that are generated by 'make ari-stubs' are all dependent on
	  res_ari_model.  Additionally some of the same modules depend on one or more
	  res_stasis_* modules.

	  ASTERISK-25027 #close
	  Reported by: Corey Farrell

	  Change-Id: I8e07fe7e81fedacb87232f2b6f8b5f47927b4153

2015-04-29 06:26 +0000 [881844297a]  Corey Farrell <git@cfware.com>

	* res_pjsip: Remove incorrect MODULEINFO from presence_xml.c.

	  Remove incorrect MODULEINFO block and unneeded header includes
	  from presence_xml.c.

	  ASTERISK-25027
	  Reported by: Corey Farrell

	  Change-Id: I977c609ab9d1fe05373027c4138900f6985990eb

2015-04-29 06:17 +0000 [c232ff3af0]  Corey Farrell <git@cfware.com>

	* Git Migration: Create doc/rest-api when needed.

	  Create the directory './doc/rest-api' at the start of 'make ari-stubs'
	  to prevent an error when documentation is generated.  The directory is
	  also added to git ignores.

	  ASTERISK-25027
	  Reported by: Corey Farrell

	  Change-Id: Iaccc7f0138501c23aa78feaca2f3cce9e68cbc1b

2015-04-29 03:03 +0000 [5d997ecc83]  Corey Farrell <git@cfware.com>

	* Build System: Prevent unneeded changes to asterisk/buildopts.h.

	  * Add AST_DEVMODE to BUILDOPTS
	  * Use BUILDOPTS to generate AST_BUILDOPT_SUM.
	  * Remove loop that defined AST_MODULE_*

	  These changes ensure that only ABI effecting options are considered for
	  AST_BUILDOPT_SUM.  This also reduces unneeded full system rebuilds caused
	  by enabling or disabling one module that another is dependent on.

	  ASTERISK-25028 #close
	  Reported by: Corey Farrell

	  Change-Id: I2c516d93df9f6aaa09ae079a8168c887a6ff93a2

2015-04-29 00:02 +0000 [55a780d211]  Corey Farrell <git@cfware.com>

	* Git Conversion: Switch Non-C files to ASTERISK_REGISTER_FILE.

	  This switches files used to generate other sources to use the new
	  ASTERISK_REGISTER_FILE macro.

	  ASTERISK-25026 #close
	  Reported by: Corey Farrell

	  Change-Id: Ieb2537b83421cad07c8955e5f90c405ccf079740

2015-04-28 13:28 +0000 [5ebfed8ef3]  Yousf Ateya <y.ateya@starkbits.com>

	* chan_iax2: Ensure that IAX flags are 64 bits.

	  Flags are 64 bits.  Without LLU suffix the value of 1<<31 is negative.
	  Although it doesn't have an effect on the current implementation, it will
	  be problem if more flags are added.

	  Change-Id: Ic290c81cfbbbf062872392d99d3322932cc49487
2015-04-28 00:29 +0000 [46cf643c75]  Ashley Sanders <asanders@digium.com>

	* chan_pjsip: Creating Channel Causes Asterisk to Crash When Duplicate AOR
	              Sections Exist in pjsip.conf

	  This patch modifies the current loading strategy of the pjsip configuration. If
	  duplicate sections (e.g. sections containing the same [id/type]) are defined in
	  [pjsip.conf], the loader will consider the configuration for the given type as
	  invalid when the duplicate section is encountered. The entire configuration
	  (including what was previously loaded) for the duplicate [id/type] sections
	  will be rejected and destroyed, an error message is logged and the load
	  processing for the given stops.

	  ASTERISK-24996
	  Reported By: Ashley Sanders

	  Change-Id: I35090ca4cd40f1f34881dfe701a329145c347aef
2015-04-28 11:50 +0000 [0bbe2c35cf]  Richard Mudgett <rmudgett@digium.com>

	* chan_vpb: Fix compile error due to use of ASTERISK_FILE_VERSION.

	  Change-Id: I51179e2a83937423676da522b766f1126de4059e
2015-04-27 14:44 +0000 [f47fed2e12]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_outbound_registration: Add debugging messages.

	  When problems occur regarding outbound registrations, it currently
	  is difficult to debug. Most off-nominal paths had warning messages,
	  but sometimes we want to know what's going on before hitting the
	  off-nominal path. This patch adds lots of debugging output that
	  should give a clearer picture of what is happening with regards
	  to outbound registrations.

	  ASTERISK-25020
	  Reported by Mark Michelson

	  Change-Id: I577bde7860be0a6c872b5bcb4d5047340bf45d45

2015-04-28 05:38 +0000 [5e96584829]  Steve Davies <steve@one47.co.uk>

	* res_rtp_asterisk: Resolve 2 discrete memory leaks in DTLS

	  ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created.
	  The resources are linked into a table, but the original alloc refs
	  are never released. ast_strdup leak in rtp_engine.c. If
	  ast_rtp_dtls_cfg_copy() is called twice on the same destination struct,
	  a pointer to an alloc'd string is overwritten before the string is free'd.

	  ASTERISK-25022
	  Reported by: one47

	  Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b

2015-04-28 04:28 +0000 [d6a2d92353]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr/cdr_csv.c: Add missing space after comma.

	  Change-Id: I3866a20019b1a3a2f10fe36640053929330b0fcb

2015-04-27 22:01 +0000 [542bfee881]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* CHANGES: Add missing spaces.

	  Change-Id: I534ea0f22759e3633585dfa9b145b4a284efe67f

2015-04-17 02:16 +0000 [5c1d07baf0]  Corey Farrell <git@cfware.com>

	* Astobj2: Allow reference debugging to be enabled/disabled by config.

	  * The REF_DEBUG compiler flag no longer has any effect on code that uses
	    Astobj2.  It is used to determine if reference debugging is enabled by
	    default.  Reference debugging can be enabled or disabled in asterisk.conf.
	  * Caller information is provided in logger errors for ao2 bad magic numbers.
	  * Optimizes AO2 by merging internal functions with the public counterpart.
	    This was possible now that we no longer require a dual ABI.

	  ASTERISK-24974 #close
	  Reported by: Corey Farrell

	  Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1

2015-04-27 12:11 +0000 [356568dc7f]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip: Fix SEGV on pending-qualify contacts

	  Permanent contacts that hadn't been qualified yet were missing
	  their contact_status entries causing SEGVs when running CLI
	  commands.

	  This patch makes sure that contact_statuses are created for
	  both dynamic and permanent contacts when they are created.
	  It also adds checks in the CLI code to make sure there's a
	  contact_status, just in case.

	  ASTERISK-25018 #close
	  Reported-by: Ivan Poddubny
	  Tested-by: Ivan Poddubny
	  Tested-by: George Joseph

	  Change-Id: I3cc13e5cedcafb24c400368b515b02d7fb81e029

2015-04-15 18:55 +0000 [358080e86e]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr/cdr_odbc.c: Added to record new columns add on CDR 1.8 Asterisk Version

	  Add new column to INSERT new columns added in cdr 1.8 version. The columns are:
	   * peeraccount
	   * linkedid
	   * sequence
	  This feature is configurable in cdr_odbc.conf using a new configuration
	  option, 'newcdrcolumns'.

	  ASTERISK-24976 #close

	  Change-Id: Ibe0c7540a88305c6012786f438a0813ad8b19127
2015-04-26 17:21 +0000 [d7f4788341]  Matt Jordan <mjordan@digium.com>

	* channels/chan_skinny: Fix compilation error introduced in f8e21a1adf

	  A typo in commit f8e21a1adf resulted in a compilation error in
	  chan_skinny. This patch fixes the typo.

	  ASTERISK-24917

	  Change-Id: Id7f4ad1fe948eb2408622e80c27936ce4516c33c

2015-04-23 17:29 +0000 [9f65ea482e]  Kevin Harwell <kharwell@digium.com>

	* app_confbridge: Default the template option to a compatible default profile.

	  Confbridge dynamic profiles did not have a default profile unless you
	  explicitly used Set(CONFBRIDGE(bridge,template)=default_bridge). If a
	  template was not set prior to the bridge being created then some
	  options were left with no default values set. This patch makes it so
	  the default templates are set to the default bridge and user profiles.

	  ASTERISK-24749 #close
	  Reported by: philippebolduc

	  Change-Id: I1bd6e94b38701ac2112d842db68de63d46f60e0a

2015-04-23 07:31 +0000 [cafdb7a049]  Olle E. Johansson <oej@edvina.net>

	* CREDITS: Update credits for Olle Johansson

	  Change-Id: I8f3d0a6c3f1075a1f7d8308593394611a96749de
2015-04-24 09:17 +0000 [bd61c9300c]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_outbound_authenticator: Increase CSeq on authed requests.

	  The way PJSIP generates an authenticated request is to use a previous
	  request as a template. This means that the authenticated request will
	  have the same Call-ID, From header (including tag), and CSeq as the
	  original request. PJSIP generates a new branch on the Via header to
	  indicate that this is a new transaction, though.

	  There are some SIP implementations, though, that do not notice the
	  change in the branch and therefore will match the authed request to the
	  original request's transaction. Since the CSeq is the same, the server
	  will repeat the response it sent to the original request.

	  This patch aids interoperability by increasing the CSeq of the authed
	  request by one.

	  ASTERISK-24845 #close
	  Reported by: Carl Fortin
	  Tested by: Carl Fortin

	  Change-Id: I39c4ca52e688a9f83bcc1878371334becdc5be01

2015-04-22 04:17 +0000 [f8e21a1adf]  Diederik de Groot <ddegroot@talon.nl>

	* Clang: Fix some more tautological-compare warnings.

	  clang can warn about a so called tautological-compare, when it finds
	  comparisons which are logically always true, and are therefor deemed
	  unnecessary.

	  Exanple:
	  unsigned int x = 4;
	  if (x > 0)    // x is always going to be bigger than 0

	  Enum Case:
	  Each enumeration is its own type. Enums are an integer type but they
	  do not have to be *signed*. C leaves it up to the compiler as an
	  implementation option what to consider the integer type of a particu-
	  lar enumeration is. Gcc treats an enum without negative values as
	  an int while clang treats this enum as an unsigned int.

	  rmudgett & mmichelson: cast the enum to (unsigned int) in assert.
	  The cast does have an effect. For gcc, which seems to treat all enums
	  as int, the cast to unsigned int will eliminate the possibility of
	  negative values being allowed. For clang, which seems to treat enums
	  without any negative members as unsigned int, the cast will have no
	  effect. If for some reason in the future a negative value is ever
	  added to the enum the assert will still catch the negative value.

	  ASTERISK-24917
	  Change-Id: Ief23ef68916192b9b72dabe702b543ecfeca0b62

2015-04-20 13:06 +0000 [1e74793061]  Diederik de Groot <ddegroot@talon.nl>

	* Example script for scan-build (the llvm static analyzer)

	   - Added Pre-amble (Options / Flags / Usage Example / GNU License)
	   - Extended Configurability
	   - Made Executable

	  ASTERISK-24917
	  Change-Id: I70405fe54e4be7dbfbcb62e291690069b88617a8

2015-04-23 12:54 +0000 [89a3fc0572]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_t38: Don't crash on authenticated reinvite after originated T.38 FAX.

	  When Asterisk originates a channel to an application, the channel is
	  hung up once the application finishes executing. When the application
	  in question is SendFax, the Asterisk PJSIP code will attempt to reinvite
	  the T.38 session to audio after the FAX completes. The hangup of the
	  channel happens in the midst of this reinvite transaction. In most
	  circumstances, this works out okay because the BYE is delayed until the
	  reinvite transaction can complete.

	  However, if the reinvite that Asterisk sends receives a 401/407
	  response, then Asterisk's attempt to re-send the reinvite with
	  authentication will fail. This is because the session supplement in
	  res_pjsip_t38 makes the assumption that the channel on the session will
	  always be non-NULL. Since the channel has been hung up, though, the
	  channel is now NULL. Attempting to operate on the channel causes a
	  crash.

	  This patch fixes the issue by ensuring that the channel on the session
	  is not NULL before attempting to mess with the T.38 framehook.

	  This patch also contains some corrections for comments that were
	  incorrect and really confused me when I first started looking at the
	  code.

	  ASTERISK-25004 #close
	  Reported by Mark Michelson

	  Change-Id: Ic5a1230668369dda4bb13524098aed9306ab45a0

2015-04-23 09:16 +0000 [75666ad7c6]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip:  Validate that contact uris start with sip: or sips:

	  Currently we use pjsip_parse_hdr to validate contact uris but it
	  appears that it allows uris without a scheme if there's a port
	  supplied.  I.E myexample.com will fail but myexample.com:5060 will
	  pass even though it has no scheme.  This causes SEGVs later on
	  whenever the uri is used.

	  To prevent this, permanent_contact_validate has been updated to check
	  that the scheme is either 'sip' or 'sips'.

	  2 uses of possibly-null endpoint have also been fixed in
	  create_out_of_dialog_request.

	  ASTERISK-24999

	  Change-Id: Ifc17d16a4923e1045d37fe51e43bbe29fa556ca2
	  Reported-by: Brad Latus

2015-04-23 08:00 +0000 [ca7193167e]  Diederik de Groot <ddegroot@talon.nl>

	* Clang: change previous tautological-compare fixes.

	  clang can warn about a so called tautological-compare, when it finds
	  comparisons which are logically always true, and are therefor deemed
	  unnecessary.

	  Exanple:
	  unsigned int x = 4;
	  if (x > 0)    // x is always going to be bigger than 0

	  Enum Case:
	  Each enumeration is its own type. Enums are an integer type but they
	  do not have to be *signed*. C leaves it up to the compiler as an
	  implementation option what to consider the integer type of a particu-
	  lar enumeration is. Gcc treats an enum without negative values as
	  an int while clang treats this enum as an unsigned int.

	  rmudgett & mmichelson: cast the enum to (unsigned int) in assert.
	  The cast does have an effect. For gcc, which seems to treat all enums
	  as int, the cast to unsigned int will eliminate the possibility of
	  negative values being allowed. For clang, which seems to treat enums
	  without any negative members as unsigned int, the cast will have no
	  effect. If for some reason in the future a negative value is ever
	  added to the enum the assert will still catch the negative value.

	  ASTERISK-24917

	  Change-Id: I0557ae0154a0b7de68883848a609309cdf0aee6a

2015-04-22 16:22 +0000 [cc77440deb]  gtjoseph <george.joseph@fairview5.com>

	* res_corosync: Add check for config file before calling corosync apis

	  On some systems, res_corosync isn't compatible with the installed version of
	  corosync so corosync_cfg_initialize fails, load_module returns LOAD_FAILURE,
	  and Asterisk terminates.  The work around has been to remember to add
	  res_corosync as a noload in modules.conf.  A better solution though is to have
	  res_corosync check for its config file before attempting to call corosync apis
	  and return LOAD_DECLINE if there's no config file.  This lets Asterisk loading
	  continue.

	  If you have a res_corosync.conf file and res_corosync fails, you get the same
	  behavior as today and the fatal error tells you something is wrong with the
	  install.

	  ASTERISK-24998

	  Change-Id: Iaf94a9431a4922ec4ec994003f02135acfdd3889
2015-04-22 15:17 +0000 [c231c85ea4]  Corey Farrell <git@cfware.com>

	* Astobj2: Ensure all calls to __adjust_lock pass a valid object.

	  __adjust_lock doesn't check for invalid objects, and doesn't have an
	  appropriate return value for invalid objects.  Most callers of
	  __adjust_lock pass objects that have already been confirmed valid,
	  this change adds checks before the remaining calls.

	  ASTERISK-24997 #close
	  Reported by: Corey Farrell

	  Change-Id: I669100f87937cc3f867cec56a27ae9c01292908f

2015-04-22 16:32 +0000 [0722e11f26]  gtjoseph <george.joseph@fairview5.com>

	* .gitignore:  Add .gcno and .gcda

	  Products of --enable-coverage

	  Change-Id: Ie20882d64b60692e2c941ea8872ab82a86ce77a3

2015-04-22 11:28 +0000 [7216e3c608]  Joshua Colp <jcolp@digium.com>

	* dns: Make query sets hold on to queries for their lifetime.

	  The query set documentation states that upon completion queries can be
	  retrieved for the lifetime of the query set. This is a reasonable
	  expectation but does not currently occur. This was originally done
	  to resolve a circular reference between queries and query sets, but
	  in practice the query can be kept.

	  This change makes it so a query does not have a reference to the
	  query set until it begins resolving. It also makes it so that the
	  reference is given up upon the query being completed. This allows
	  the queries to remain for the lifetime of the query set. As the
	  query set on the query is only useful to the query set functionality
	  and only for the lifetime that the query is resolving this is safe
	  to do.

	  ASTERISK-24994 #close
	  Reported by: Joshua Colp

	  Change-Id: I54e09c0cb45475896654e7835394524e816d1aa0

2015-04-20 13:01 +0000 [09c7c678a3]  Diederik de Groot <ddegroot@talon.nl>

	* Fix/Update clang-RAII macro implementation

	  - When you need to refer to 'variable XXX' outside a block, it needs
	  to be declared as '__block XXX', otherwise it will not be available with-
	  in the block, making updating that variable hard to do, and ast_free
	  lead to issues.

	  - Removed the #error message
	  because it creates complications when compiling external projects
	  against asterisk For example when using a different compiler than the
	  one used to compile asterisk. The warning/error should be generated
	  during the configure process not the compilation process

	  ASTERISK-24917
	  Change-Id: I12091228090e90831bf2b498293858f46ea7a8c2

2015-04-14 14:04 +0000 [190fa4f333]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_mwi: Send unsolicited MWI NOTIFY on startup and when endpoint registers.

	  Currently the res_pjsip_mwi module only sends an unsolicited MWI NOTIFY upon
	  a mailbox state change (such as a new message being left, or one being deleted).
	  In practice this is not sufficient to keep clients aware of the current MWI status.

	  This change makes the module send unsolicited MWI NOTIFY on startup so that
	  clients are guaranteed to have the most up to date MWI information. It also makes
	  clients receive an unsolicited MWI NOTIFY upon registration so if they are unaware
	  of the current MWI status they receive it.

	  ASTERISK-24982 #close
	  Reported by: Joshua Colp

	  Change-Id: I043f20230227e91218f18a82c7d5bb2aa62b1d58

2015-04-21 17:45 +0000 [2a36bb5d9a]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* CHANGES remove tab space

	  Change-Id: I6b43e43474bf6fb77b8227eadb036036f8e90521

2015-04-21 15:17 +0000 [5757d2d30d]  Corey Farrell <git@cfware.com>

	* Check for ao2_alloc failure in __ast_channel_internal_alloc.

	  Fix a crash that could occur in __ast_channel_internal_alloc if
	  ao2_alloc fails.

	  ASTERISK-24991 #close

	  Change-Id: I4ca89189eb22f907408cb87d0a1645cfe1314a90

2015-04-20 14:30 +0000 [6331be0638]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Set the endpoint on SUBSCRIBE dialogs.

	  When SUBSCRIBE dialogs were established, we never associated
	  the endpoint that created the subscription with the dialog
	  we end up creating. In most cases, this ended up not causing
	  any problems.

	  The actual bug that was observed was that when a device that
	  was behind NAT established a subscription with Asterisk, Asterisk
	  would end up sending in-dialog NOTIFY requests to the device's
	  private IP addres instead of the public address of the NAT router.

	  When Asterisk receives the initial SUBSCRIBE from the device,
	  res_pjsip_nat rewrites the contact to the public address on which the
	  SUBSCRIBE was received. This allows for the dialog to have its target
	  address set to the proper public address. Asterisk then would send a 200
	  OK response to the SUBSCRIBE, then a NOTIFY with the initial
	  subscription state. The device would then send a 200 OK response to
	  Asterisk's NOTIFY.

	  Here's where things went wrong. When the 200 OK arrived, res_pjsip_nat
	  did not rewrite the address in the Contact header. Then, when the PJSIP
	  dialog layer processed the 200 OK, PJSIP would perform a comparison
	  between the IP address in the Contact header and its saved target
	  address for the dialog. Since they differed, PJSIP would update the
	  target dialog address to be the address in the Contact header. From this
	  point, if Asterisk needed to send a NOTIFY to the device, the result was
	  that the NOTIFY would be sent to the private address that the device
	  placed in the Contact header.

	  The reason why res_pjsip_nat did not rewrite the address when it
	  received the 200 OK response was that it could not associate the
	  incoming response with a configured endpoint. This is because on a
	  response, the only way to associate the response to an endpoint is by
	  finding the dialog that the response is associated with and then finding
	  the endpoint that is associated with that dialog. We do not perform
	  endpoint lookups on responses. res_pjsip_pubsub skipped the step of
	  associating the endpoint with the dialog we created, so res_pjsip_nat
	  could not find the associated endpoint and therefore couldn't rewrite
	  the contact.

	  This commit message is like 50x longer than the actual fix.

	  ASTERISK 24981 #close
	  Reported by Mark Michelson

	  Change-Id: I2b963c58c063bae293e038406f7d044a8a5377cd
2015-04-16 22:34 +0000 [2f418c052e]  Gareth Palmer <gareth@acsdata.co.nz>

	* New AMI Command Output Format

	  This change modifies how the the output from a CLI command is sent
	  to a client over AMI.

	  Output from the CLI command is now sent as a series of zero-or-more
	  Output: headers.

	  Additionally, commands that fail to execute (eg: no such command,
	  invalid syntax etc.) now cause an Error response instead of Success.

	  If the command executed successfully, but the manager unable to
	  provide the output the reason will be included in the Message:
	  header. Otherwise it will contain 'Command output follows'.

	  Depends on a new version of starpy (> 1.0.2) that supports the new
	  output format.

	  See pull-request https://github.com/asterisk/starpy/pull/34

	  ASTERISK-24730

	  Change-Id: I6718d95490f0a6b3f171c1a5cdad9207f9a44888
2015-04-20 18:00 +0000 [614f506690]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi/sig_pri: Make post AMI HangupRequest events on PRI channels.

	  The chan_dahdi channel driver is a very old driver.  The ability for it to
	  support ISDN was added well after the initial analog support.  Setting the
	  softhangup flags is a carry over from the original analog code.  The
	  driver was not updated to call ast_queue_hangup() which will post the AMI
	  HangupRequest event.

	  * Changed sig_pri.c to call ast_queue_hangup() instead of setting the
	  softhangup flag when the remote party initiates a hangup.

	  ASTERISK-24895 #close
	  Reported by: Andrew Zherdin

	  Change-Id: I5fe2e48556507785fd8ab8e1c960683fd5d20325

2015-04-20 13:40 +0000 [bff3064578]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr/cdr_adaptive_odbc.c: Refactor concatenate columns name.

	  The concatenate for columns name to INSERT INTO is always the same. It is
	  possible to do it on one line.

	  ASTERISK-24980

	  Change-Id: Ib8bb53c42535378581d4ef729cc5ebbb22b067ac
2015-04-20 09:53 +0000 [06ba1e59cb]  gtjoseph <george.joseph@fairview5.com>

	* pjsip_options:  Fix format specifier for int64_t rtt.

	  Contact status rtt is an int64_t and needs the PRId64 macro to
	  properly create the format specifier on 32-bit systems.

	  Change-Id: I4b8ab958fc1e9a179556a9b4ffa49673ba9fdec7

2015-04-18 13:36 +0000 [298faf7c50]  gtjoseph <george.joseph@fairview5.com>

	* pjsip_options:  Fix non-qualified contacts showing as unavailable

	  The "Add qualify_timeout processing and eventing" patch introduced
	  an issue where contacts that had qualify_frequency set to 0 were
	  showing Unavailable instead Unknown.  This patch checks for
	  qualify_frequency=0 and create an "Unknown"  contact_status
	  with an RTT = 0.

	  Previously, the lack of contact_status implied Unknown but since
	  we're now changing endpoint state based on contact_status, I've
	  had to add new UNKNOWN status so that changes could trigger the
	  appropriate contact_status observers.

	  ASTERISK-24977: #close

	  Change-Id: Ifcbc01533ce57f0e4e584b89a395326e098b8fe7

2015-04-19 15:49 +0000 [8e903b17ea]  Matt Jordan <mjordan@digium.com>

	* main/pbx: Don't attempt to destroy a previously destroyed exten/priority tuple

	  When a PBX registrar is unloaded, it will fail to remove its extension from
	  the context root_table if a dialplan application used by that extension is
	  still loaded. This can be the case for AGI, which can be unloaded after several
	  of the standard PBX providers. Often, this is harmless; however, if the
	  extension's priorities are removed during the failed unloading *and* the
	  dialplan application later unregisters, it leaves a ticking timebomb for the
	  next PBX provider that attempts to iterate over the extensions. When that
	  occurs, the peer_table pointer on the extension will already be set to NULL.
	  The current code does not check to see if the pointer is NULL before passing
	  it to a hashtab function this is not NULL tolerant.

	  Since it is possible for the peer_table to be NULL when we normally would not
	  expect that to be the case, the solution in this patch is to simply skip over
	  processing an extension's priorities if peer_table is NULL.

	  Prior to this patch, the tests/pbx/callerid_match test would crash during
	  module unload. With this patch, the test no longer crashes after running.

	  ASTERISK-24774 #close
	  Reported by: Corey Farrell

	  Change-Id: I2bbeecb7e0f77bac303a1b9135e4cdb4db6d4c40

2015-04-17 18:05 +0000 [1269dd06bc]  Richard Mudgett <rmudgett@digium.com>

	* res_fax: Fix latent bug exposed by ASTERISK-24841 changes.

	  Three fax related tests started failing as a result of changes made for
	  ASTERISK-24841:
	  tests/fax/pjsip/gateway_t38_g711
	  tests/fax/sip/gateway_mix1
	  tests/fax/sip/gateway_mix3

	  Historically, ast_channel_make_compatible() did nothing if the channels
	  were already "compatible" even if they had a sub-optimal translation path
	  already setup.  With the changes from ASTERISK-24841 this is no longer
	  true in order to allow the best translation paths to always be picked.  In
	  res_fax.c:fax_gateway_framehook() code manually setup the channels to go
	  through slin and then called ast_channel_make_compatible().  With the
	  previous version of ast_channel_make_compatible() this was always a
	  no-operation.

	  * Remove call to ast_channel_make_compatible() in fax_gateway_framehook()
	  that now undoes what was just setup when the framehook is attached.

	  * Fixed locking around saving the channel formats in
	  fax_gateway_framehook() to ensure that the formats that are saved are
	  consistent.

	  * Fix copy pasta errors in fax_gateway_framehook() that confuses read and
	  write when dealing with saved channel formats.

	  ASTERISK-24841
	  Reported by: Matt Jordan

	  Change-Id: I6fda0877104a370af586a5e8cf9e161a484da78d

2015-04-17 16:19 +0000 [c1d44ff043]  Corey Farrell <git@cfware.com>

	* Fix issue with AST_THREADSTORAGE_RAW when DEBUG_THREADLOCALS is enabled.

	  When DEBUG_THREADLOCALS is enabled it causes the threadlocal cleanup to be
	  called as a function.  This causes a compile error with raw threadstorage as
	  it uses NULL for cleanup.  This fix uses a macro that provides NULL when
	  DEBUG_THREADLOCALS is disabled, and replaces the call to "c_cleanup(data);"
	  with "{};" when DEBUG_THREADLOCALS is enabled.

	  ASTERISK-24975 #close
	  Reported by: Ashley Sanders

	  Change-Id: I3ef7428ee402816d9fcefa1b3b95830c00d5c402

2015-04-15 10:38 +0000 [aae45acbda]  Mark Michelson <mmichelson@digium.com>

	* Detect potential forwarding loops based on count.

	  A potential problem that can arise is the following:

	  * Bob's phone is programmed to automatically forward to Carol.
	  * Carol's phone is programmed to automatically forward to Bob.
	  * Alice calls Bob.

	  If left unchecked, this results in an endless loops of call forwards
	  that would eventually result in some sort of fiery crash.

	  Asterisk's method of solving this issue was to track which interfaces
	  had been dialed. If a destination were dialed a second time, then
	  the attempt to call that destination would fail since a loop was
	  detected.

	  The problem with this method is that call forwarding has evolved. Some
	  SIP phones allow for a user to manually forward an incoming call to an
	  ad-hoc destination. This can mean that:

	  * There are legitimate use cases where a device may be dialed multiple
	  times, or
	  * There can be human error when forwarding calls.

	  This change removes the old method of detecting forwarding loops in
	  favor of keeping a count of the number of destinations a channel has
	  dialed on a particular branch of a call. If the number exceeds the
	  set number of max forwards, then the call fails. This approach has
	  the following advantages over the old:

	  * It is much simpler.
	  * It can detect loops involving local channels.
	  * It is user configurable.

	  The only disadvantage it has is that in the case where there is a
	  legitimate forwarding loop present, it takes longer to detect it.
	  However, the forwarding loop is still properly detected and the
	  call is cleaned up as it should be.

	  Address review feedback on gerrit.

	  * Correct "mfgium" to "Digium"
	  * Decrement max forwards by one in the case where allocation of the
	    max forwards datastore is required.
	  * Remove irrelevant code change from pjsip_global_headers.c

	  ASTERISK-24958 #close

	  Change-Id: Ia7e4b7cd3bccfbd34d9a859838356931bba56c23
2015-04-16 10:51 +0000 [56a2baa21d]  Kevin Harwell <kharwell@digium.com>

	* bridge.c: NULL app causes crash during attended transfer

	  Due to a race condition there was a chance that during an attended transfer the
	  channel's application would return NULL. This, of course, would cause a crash
	  when attempting to access the memory. This patch retrieves the channel's app
	  at an earlier time in processing in hopes that the app name is available.
	  However, if it is not then "unknown" is used instead. Since some string value
	  is now always present the crash can no longer occur.

	  ASTERISK-24869 #close
	  Reported by: viniciusfontes
	  Review: https://gerrit.asterisk.org/#/c/133/

	  Change-Id: I5134b84c4524906d8148817719d76ffb306488ac

2015-04-11 17:04 +0000 [c6ed681638]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip: Add global option to limit the maximum time for initial qualifies

	  Currently when Asterisk starts initial qualifies of contacts are spread out
	  randomly between 0 and qualify_timeout to prevent network and system overload.
	  If a contact's qualify_frequency is 5 minutes however, that contact may be
	  unavailable to accept calls for the entire 5 minutes after startup.  So while
	  staggering the initial qualifies is a good idea, basing the time on
	  qualify_timeout could leave contacts unavailable for too long.

	  This patch adds a new global parameter "max_initial_qualify_time" that sets the
	  maximum time for the initial qualifies.  This way you could make sure that all
	  your contacts are initialy, randomly qualified within say 30 seconds but still
	  have the contact's ongoing qualifies at a 5 minute interval.

	  If max_initial_qualify_time is > 0, the formula is initial_interval =
	  min(max_initial_interval, qualify_timeout * random().  If not set,
	  qualify_timeout is used.

	  The default is "0" (disabled).

	  ASTERISK-24863 #close

	  Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
	  Tested-by: George Joseph <george.joseph@fairview5.com>

2015-04-16 13:20 +0000 [664d3263e4]  Scott Griepentrog <scott@griepentrog.com>

	* res_pjsip_pubsub: On notify fail deleted sub_tree is then referenced

	  This change makes the send_notify of the sub_tree
	  not happen when the sub_tree has been deleted due
	  to the notify call failing, which avoids a crash.

	  ASTERISK-24970 #close

	  Change-Id: I1f20ffc08b192f59c457293b218025a693992cbf
2015-04-11 16:56 +0000 [51886c68dc]  gtjoseph <george.joseph@fairview5.com>

	* pjsip_options: Add qualify_timeout processing and eventing

	  This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the
	  discussion at
	  http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html

	  The basic issues are that changes in contact status don't cause events to be
	  emitted for the associated endpoint.  Only dynamic contact add/delete actions
	  update the endpoint.  Also, the qualify timeout is fixed by pjsip at 32 seconds
	  which is a long time.

	  This patch makes use of the new transaction timeout feature in r4585 and
	  provides the following capabilities...

	  1.  A new aor/contact variable 'qualify_timeout' has been added that allows the
	  user to specify the maximum time in milliseconds to wait for a response to an
	  OPTIONS message.  The default is 3000ms.  When the timer expires, the contact is
	  marked unavailable.

	  2.  Contact status changes are now propagated up to the endpoint as follows...
	  When any contact is 'Available', the endpoint is marked as 'Reachable'.  When
	  all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'.  The
	  existing endpoint events are generated appropriately.

	  ASTERISK-24863 #close

	  Change-Id: Id0ce0528e58014da1324856ea537e7765466044a
	  Tested-by: Dmitriy Serov
	  Tested-by: George Joseph <george.joseph@fairview5.com>

2015-04-11 16:39 +0000 [ab6382cafd]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip: Refactor endpt_send_request to include transaction timeout

	  This is the first follow-on to https://reviewboard.asterisk.org/r/4572/ and the
	  discussion at
	  http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html

	  Since we currently have no control over pjproject transaction timeout, this
	  patch pulls the pjsip_endpt_send_request function out of pjproject and into
	  res_pjsip/endpt_send_transaction in order to implement that capability.

	  Now when the transaction is initiated, we also schedule our own pj_timer with
	  our own desired timeout.

	  If the transaction completes before either timeout, pjproject cancels its timer,
	  and calls our tsx callback where we cancel our timer and run the app callback.

	  If the pjproject timer times out first, pjproject calls our tsx callback where
	  we cancel our timer and run the app callback.

	  If our timer times out first, we terminate the transaction which causes
	  pjproject to cancel its timer and call our tsx callback where we run the app
	  callback.

	  Regardless of the scenario, pjproject is calling the tsx callback inside the
	  group_lock and there are checks in the callback to make sure it doesn't run
	  twice.

	  As part of this patch ast_sip_send_out_of_dialog_request was created to replace
	  its similarly named private function.  It takes a new timeout argument in
	  milliseconds (<= 0 to disable the timeout).

	  ASTERISK-24863 #close
	  Reported-by: George Joseph <george.joseph@fairview5.com>
	  Tested-by: George Joseph <george.joseph@fairview5.com>

	  Change-Id: I0778dc730d9689c5147a444a04aee3c1026bf747
2015-04-15 16:08 +0000 [043c38f6de]  gtjoseph <george.joseph@fairview5.com>

	* More .gitignore updates

	  Added .pyc and .sha1 to the top-level .gitignore.

	  Change-Id: I7dfc4f554d54d22947b38140d3305007503cc16a
	  Tested-by: George Joseph <george.joseph@fairview5.com>

2015-04-14 02:36 +0000 [abf10a1d4c]  Corey Farrell <git@cfware.com>

	* Build System: Enable use of ~/.asterisk.makeopts and /etc/asterisk.makeopts.

	  The Makefile claims that you can set default menuselect options by creating
	  ~/.asterisk.makeopts or /etc/asterisk.makeopts, but they are never read.
	  The rule for menuselect.makeopts is only allowed to run if the active target
	  is 'menuselect', but the menuselect target doesn't depend on
	  menuselect.makeopts.  A dot (wildcard character) was added so the rule will
	  be active for the targets that cause it to run: nmenuselect, cmenuselect,
	  and gmenuselect.

	  ASTERISK-13271 #close
	  Reported by: John Nemeth

	  Change-Id: Ibde804ff196283def49ccb9432fbf224a22586e2
2015-04-13 08:47 +0000 [a3cec44a0a]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add external PJSIP resolver implementation using core DNS API.

	  This change adds the following:

	  1. A query set implementation. This is an API that allows queries to be executed in parallel and once all have completed a callback is invoked.
	  2. Unit tests for the query set implementation.
	  3. An external PJSIP resolver which uses the DNS core API to do NAPTR, SRV, AAAA, and A lookups.

	  For the resolver it will do NAPTR, SRV, and AAAA/A lookups in parallel. If NAPTR or SRV
	  are available it will then do more queries. And so on. Preference is NAPTR > SRV > AAAA/A,
	  with IPv6 preferred over IPv4. For transport it will prefer TLS > TCP > UDP if no explicit
	  transport has been provided. Configured transports on the system are taken into account to
	  eliminate resolved addresses which have no hope of completing.

	  ASTERISK-24947 #close
	  Reported by: Joshua Colp

	  Change-Id: I56cb03ce4f9d3d600776f36928e0b3e379b5d71e

2015-04-14 13:16 +0000 [33a319ae73]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cel_pgsql: Fix name string for log on unable allocate memory.

	  The LOG_ERROR has reference to CDR instead of CEL  for LENGTHEN_BUF1 and
	  LENGTHEN_BUF2.

	  ASTERISK-24965 #close
	  Reported by: Rodrigo Ramirez Norambuena

	  Change-Id: Icc818697d7d66d34bfe3048cdd15ca2b06c89744
2015-04-14 15:59 +0000 [f89481e39c]  Corey Farrell <git@cfware.com>

	* test_astobj2_weaken: Fix source file registration.

	  Update test_astobj2_weaken to use the new AST_REGISTER_FILE macro.

	  Change-Id: Ieedadf16610f2e042f393e0501a36447cd07f83d

2015-04-13 05:28 +0000 [62508d6891]  Corey Farrell <git@cfware.com>

	* Build System: Create Makefile macro MOD_ADD_SOURCE.

	  This new macro allows a single line to add all additional
	  sources to a module.  This helps prevent modules from
	  missing steps, and makes future changes easier since
	  they can be made in a single place.

	  ASTERISK-24960 #close
	  Reported by: Corey Farrell

	  Change-Id: I38f12d8b72c5e7bb37a879b2fb51761a2855eb4b

2015-04-12 09:08 +0000 [23a180cade]  Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>

	* cdr_pgsql: Fix CLI "cdr show pgsql status" command.

	  The command always showed the usage information.

	  * Fix the error in command validation for CLI_SHOWUSAGE.

	  ASTERISK-24959 #close
	  Reported by: Rodrigo Ramirez Norambuena

	  Change-Id: I584f0936bb01001336a468a55c1d05d79fe795d5
2015-04-13 19:06 +0000 [bf46ef35ca]  gtjoseph <george.joseph@fairview5.com>

	* .gitignore updates for master/13

	  Added products of ./bootstrap

	  Added nmenuselect and gmenuselect to menuselect/

	  Change-Id: Ied658463958bafc04a9aff9ebc28e40c116a6e35

2015-04-13 06:52 +0000 [62e95065d6]  Corey Farrell <git@cfware.com>

	* AMI: Fix improper handling of lines that are exactly 1025 bytes long.

	  When AMI receives a line that is 1025 bytes long, it sends two error
	  messages.  Copy the last byte in the buffer to the first postiion,
	  set the length to 1.

	  ASTERISK-20524 #close
	  Reported by: David M. Lee

	  Change-Id: Ifda403e2713b59582c715229814fd64a0733c5ea

2015-04-12 03:22 +0000 [cb6bf3094e]  Corey Farrell <git@cfware.com>

	* astobj2: Add support for weakproxy objects.

	  This implements "weak" references.  The weakproxy object is a real ao2 with
	  normal reference counting of its own.  When a weakproxy is pointed to a normal
	  object they hold references to each other.  The normal object is automatically
	  freed when a single reference remains (the weakproxy).  The weakproxy also
	  supports subscriptions that will notify callbacks when it does not point
	  to any real object.

	  ASTERISK-24936 #close
	  Reported by: Corey Farrell

	  Change-Id: Ib9f73c02262488d314d9d9d62f58165b9ec43c67

2015-04-13 14:41 +0000 [a573b77f78]  David M. Lee <dlee@respoke.io>

	* Fixing extconf compile

	  During the mass code deletion for clang support, a stray backslash was
	  left behind that was causing utils to fail to compile.

	  Change-Id: I60e5fa58c9a5b248bde23aaada79ff663f87a2a1

2015-04-13 09:54 +0000 [3f9aa29945]  Matt Jordan <mjordan@digium.com>

	* build_tools/make_version: Update version parsing for Git migration

	  External systems - such as the Asterisk Test Suite - require knowledge of the
	  upstream branch. Unfortunately, after moving to Git, the Asterisk version
	  currently consists of only a 'GIT" prefix followed by an object blob,
	  e.g., GIT-as08d7. This makes it difficult for such systems to know what
	  features are available in a particular check out of Asterisk.

	  This patch fixes this by hardcoding the branch in a variable in the
	  make_version script. Since the mainline branches are not changed often -
	  typically only once a year - this is a reasonable approach to solving
	  the problem, and is more reliable than parsing the output of 'git branch
	  -vv'. Branches that track off of an upstream primary branch will then get the
	  benefit of knowing which mainline branch they are currently based off
	  of.

	  ASTERISK-24954 #close

	  Change-Id: I8090d5d548b6d19e917157ed530b914b7eaf9799

2015-04-13 05:57 +0000 [fbc8ddfe63]  Corey Farrell <git@cfware.com>

	* Optional API: Fix handling of sources that are both provider and user.

	  OPTIONAL_API has conditionals to define AST_OPTIONAL_API and
	  AST_OPTIONAL_API_ATTR differently based on if AST_API_MODULE is defined.
	  Unfortunately this is inside the include protection block, so only the
	  first status of AST_API_MODULE is respected.  For example res_monitor
	  is an optional API provider, but uses func_periodic_hook.  This makes
	  func_periodic_hook non-optional to res_monitor.

	  This changes optional_api.h so that AST_OPTIONAL_API and
	  AST_OPTIONAL_API_ATTR is redefined every time the header is included.

	  ASTERISK-17608 #close
	  Reported by: Warren Selby

	  Change-Id: I8fcf2a5e7b481893e17484ecde4f172c9ffb5679

2015-04-11 21:38 +0000 [4a58261694]  Matt Jordan <mjordan@digium.com>

	* git migration: Refactor the ASTERISK_FILE_VERSION macro

	  Git does not support the ability to replace a token with a version
	  string during check-in. While it does have support for replacing a
	  token on clone, this is somewhat sub-optimal: the token is replaced
	  with the object hash, which is not particularly easy for human
	  consumption. What's more, in practice, the source file version was often
	  not terribly useful. Generally, when triaging bugs, the overall version
	  of Asterisk is far more useful than an individual SVN version of a file. As a
	  result, this patch removes Asterisk's support for showing source file
	  versions.

	  Specifically, it does the following:

	  * Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
	    remove passing the version in with the macro. Other facilities
	    than 'core show file version' make use of the file names, such as
	    setting a debug level only on a specific file. As such, the act of
	    registering source files with the Asterisk core still has use. The
	    macro rename now reflects the new macro purpose.

	  * main/asterisk:
	    - Refactor the file_version structure to reflect that it no longer
	      tracks a version field.
	    - Remove the "core show file version" CLI command. Without the file
	      version, it is no longer useful.
	    - Remove the ast_file_version_find function. The file version is no
	      longer tracked.
	    - Rename ast_register_file_version/ast_unregister_file_version to
	      ast_register_file/ast_unregister_file, respectively.

	  * main/manager: Remove value from the Version key of the ModuleCheck
	    Action. The actual key itself has not been removed, as doing so would
	    absolutely constitute a backwards incompatible change. However, since
	    the file version is no longer tracked, there is no need to attempt to
	    include it in the Version key.

	  * UPGRADE: Add notes for:
	    - Modification to the ModuleCheck AMI Action
	    - Removal of the "core show file version" CLI command

	  Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e

2015-04-12 06:12 +0000 [5d34bce635]  Corey Farrell <git@cfware.com>

	* main/editline: Add .gitignore.

	  This patch adds a .gitignore for main/editline to ignore all build results.

	  Change-Id: I68c7bf375ea46282689e5a706534b69fca233b5d

2015-04-11 23:22 +0000 [d6605b3c10]  Matt Jordan <mjordan@digium.com>

	* .gitignore: Ignore tarballs (*.gz)

	  This patch updates the root .gitignore file to ignore files with a .gz
	  extension. This will cause git to ignore downloaded sound tarballs in
	  the the sounds/ directory.

	  Change-Id: Ie84f085cc0fa51262209e7bfc1b1ba8c04a1ef59

2015-04-11 13:20 +0000 [b35e184d41]  gtjoseph <george.joseph@fairview5.com>

	* Add .gitignore and .gitreview files

	  Add the .gitignore and .gitreview files to the asterisk repo.

	  NB:  You can add local ignores to the .git/info/exclude file
	  without having to do a commit.

	  Common ignore patterns are in the top-level .gitignore file.
	  Subdirectory-specific ignore patterns are in their own .gitignore
	  files.

	  Change-Id: I842a1588ff27d8a0189f12d597f0a7af033d6c69
	  Tested-by: George Joseph

2015-04-11 10:27 +0000 [356b770632]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix various warnings for tests

	  This patch fixes a variety of clang compiler warnings for unit tests. This
	  includes autological comparison issues, ignored return values, and
	  interestingly enough, one embedded function. Fun!

	  Review: https://reviewboard.asterisk.org/r/4555

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4555.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 434705 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434706 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434707 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-11 10:11 +0000 [5f181bcccd]  Juergen Spies (License 6698)

	* res/res_pjsip_t38: Add missing initialization of t38faxmaxdatagram

	  Prior to this patch, the far_max_datagram value on the UDPTL structure would
	  remain -1 if the remote endpoint fails to provide the SDP media attribute
	  T38FaxMaxDatagram. This can result in the INVITE request being rejected. With
	  this patch, we will now properly initialize the value with either the default
	  value or with the value provided by pjsip.conf's t38_udptl_maxdatagram
	  parameter.

	  Review: https://reviewboard.asterisk.org/r/4589

	  ASTERISK-24928 #close
	  Reported by: Juergen Spies
	  Tested by: Juergen Spies
	  patches:
	    pjsipT38patch20150331.txt submitted by Juergen Spies (License 6698)
	  ........

	  Merged revisions 434688 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434689 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 18:37 +0000 [c499cabf53]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip/res_pjsip/bridge_softmix/core: Improve translation path choices.

	  With this patch, chan_pjsip/res_pjsip now sets the native formats to the
	  codecs negotiated by a call.

	  * The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native
	  formats to include all the negotiated audio codecs instead of only the
	  initial preferred audio codec and later the currently received audio
	  codec.

	  * The audio frame handling in channel.c:ast_read() is more streamlined and
	  will automatically adjust to changes in received frame formats.  The new
	  policy is to remove translation and pass the new frame format to the
	  receiver except if the translation was to a signed linear format.  A more
	  long winded version is commented in ast_read() along with some caveats.

	  * The audio frame handling in channel.c:ast_write() is more streamlined
	  and will automatically adjust any needed translation to changes in the
	  frame formats sent.  Frame formats sent can change for many reasons such
	  as a recording is being played back or the bridged peer changed the format
	  it sends.  Since it is a normal expectation that sent formats can change,
	  the codec mismatch warning message is demoted to a debug message.

	  * Removed the short circuit check in
	  channel.c:ast_channel_make_compatible_helper().  Two party bridges need to
	  make channels compatible with each other.  However, transfers and moving
	  channels among bridges can result in otherwise compatible channels having
	  sub-optimal translation paths if the make compatible check is short
	  circuited.  A result of forcing the reevaluation of channel compatibility
	  is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc
	  options take effect consistently now.  It is unfortunate that these two
	  options are enabled by default and negate some of the benefits to the
	  changes in channel.c:ast_read() by forcing translation through signed
	  linear on a two party bridge.

	  * Improved the softmix bridge technology to better control the translation
	  of frames to the bridge.  All of the incoming translation is now normally
	  handled by ast_read() instead of splitting any translation steps between
	  ast_read() and the slin factory.  If any frame comes in with an unexpected
	  format then the translation path in ast_read() is updated for the next
	  frame and the slin factory handles the current frame translation.

	  This is the final patch in a series of patches aimed at improving
	  translation path choices.  The other patches are on the following reviews:
	  https://reviewboard.asterisk.org/r/4600/
	  https://reviewboard.asterisk.org/r/4605/

	  ASTERISK-24841 #close
	  Reported by: Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/4609/
	  ........

	  Merged revisions 434671 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434672 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 16:06 +0000 [66f3fd0028]  Kevin Harwell <kharwell@digium.com>

	* chan_sip: make progressinband default to no

	  After the "progressinband" value setting of "never" was updated to never send a
	  183 this separated its use from the "no" value. Since "never" was the default,
	  but most users probably expect "no" this patch updates the default for the
	  "progressinband" setting to "no."

	  ASTERISK-24835 #close
	  Reported by: Andrew Nagy
	  Review: https://reviewboard.asterisk.org/r/4606/
	  ........

	  Merged revisions 434654 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434655 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 12:56 +0000 [8bae18ab93]  yaron nahum (License 6676)

	* res_pjsip: Add an 'auto' option for DTMF Mode

	  This patch adds support for automatically detecting the type of DTMF that a
	  PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
	  the channel created for an endpoint will attempt to determine if RFC 4733
	  DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
	  for the channel will be set to inband.

	  Review: https://reviewboard.asterisk.org/r/4438

	  ASTERISK-24706 #close
	  Reported by: yaron nahum
	  patches:
	    yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
	  ........

	  Merged revisions 434637 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434638 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 12:00 +0000 [f69e46de25]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_config_wizard: Cleanup load unload

	  While investigating other unload issues I realized that the load/unload process 
	  for the config wizard was pretty ugly so I've refactored it as follows...

	  When the res_pjsip sorcery instance is created the config_wizard bumps it's own 
	  module reference to prevent it from unloading while the sorcery instance is 
	  still active.  When res_pjsip unloads and it's sorcery instance is destroyed, 
	  the config wizard unrefs itself which then allows itself to unload cleanly.  
	  Since the config wizard now can't load after res_pjsip or unload before it 
	  (which should have been the correct behavior all along), I was able to remove 
	  the chunks of code in both load_module and unload_module that handled that case.

	  Ran the testsuite tests to insure there were no functional changes and REF_DEBUG 
	  to insure that Asterisk was shutting down cleanly with no FRACKs or leaks.

	  Tested-by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/4610/
	  ........

	  Merged revisions 434619 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434620 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 11:38 +0000 [6f1a7fe05f]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c,channel.c: Minor code simplification and cleanup.

	  * Made code easier to follow in bridge_softmix.c:analyse_softmix_stats()
	  and made some debug messages more helpful.

	  * Made some debug and warning messages more helpful in
	  channel.c:set_format().

	  Review: https://reviewboard.asterisk.org/r/4607/
	  ........

	  Merged revisions 434617 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434618 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 11:32 +0000 [0b805cb875]  Richard Mudgett <rmudgett@digium.com>

	* translate.c: Only select audio codecs to determine the best translation choice.

	  Given a source capability of h264 and ulaw, a destination capability of
	  h264 and g722 then ast_translator_best_choice() would pick h264 as the
	  best choice even though h264 is a video codec and Asterisk only supports
	  translation of audio codecs.  When the audio starts flowing, there are
	  warnings about a codec mismatch when the channel tries to write a frame to
	  the peer.

	  * Made ast_translator_best_choice() only select audio codecs.

	  * Restore a check in channel.c:set_format() lost after v1.8 to prevent
	  trying to set a non-audio codec.

	  This is an intermediate patch for a series of patches aimed at improving
	  translation path choices for ASTERISK-24841.

	  This patch is a complete enough fix for ASTERISK-21777 as the v11 version
	  of ast_translator_best_choice() does the same thing.  However, chan_sip.c
	  still somehow tries to call ast_codec_choose() which then calls
	  ast_best_codec() with a capability set that doesn't contain any audio
	  formats for the incoming call.  The remaining warning message seems to be
	  a benign transient.

	  ASTERISK-21777 #close
	  Reported by: Nick Ruggles

	  ASTERISK-24380 #close
	  Reported by: Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/4605/
	  ........

	  Merged revisions 434614 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434615 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434616 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 09:56 +0000 [894153b8b1]  Matt Jordan <mjordan@digium.com>

	* res/ari: Fix model validation for ChannelHold event

	  When the ChannelHold event was added, the 'musicclass' parameter was
	  erroneously removed. This caused the ChannelHold events to be rejected as
	  they failed model validation. This patch updates the Swagger schema such that
	  it now properly reflects the event that is being created.

	  Hooray for tests that catch things like this.
	  ........

	  Merged revisions 434597 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434598 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 08:32 +0000 [02a0a4d65f]  Joshua Colp <jcolp@digium.com>

	* dns: Fix build when TEST_FRAMEWORK is not defined.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434583 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 07:40 +0000 [80c443bea4]  Y Ateya (License 6693)

	* channels/chan_iax2: Improve POKE expiration time calculation for lossy networks

	  POKE is used to check for peer availability; however, in networks with packet
	  loss, the current calculations may result in POKE expiration times that are too
	  short. This patch alters the expiration/retry time logic to take into account
	  the last known qualify round trip time, as opposed to always using a static
	  value for each peer.

	  Review: https://reviewboard.asterisk.org/r/4536

	  ASTERISK-22352 #close
	  Reported by: Frederic Van Espen

	  ASTERISK-24894 #close
	  Reported by: Y Ateya
	  patches:
	    poke_noanswer_duration.diff submitted by Y Ateya (License 6693)
	  ........

	  Merged revisions 434564 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434565 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434566 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-10 07:23 +0000 [b3d01f1fbf]  Y Ateya (License 6693)

	* channels/chan_iax2: Add a configuration parameter for call token expiration

	  This patch adds a new configuration parameter, 'calltokenexpiration', that
	  controls how long before an authentication call token is expired. The default
	  maintains the RFC specified 10 seconds. Setting it to a higher value may be
	  useful in lossy networks.

	  Review: https://reviewboard.asterisk.org/r/4588

	  ASTERISK-24939 #close
	  Reported by: Y Ateya
	  patches:
	    ctoken_configuration.diff submitted by Y Ateya (License 6693)


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434563 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-09 18:12 +0000 [ed6b6e3c03]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_phoneprov_provider: Fix reference leak on unload

	  res_pjsip_phoneprov_provider was leaking references to phoneprov objects due to 
	  a missing OBJ_NODATA in an ao2_callback in load_users().  Rather than adding the 
	  OBJ_NODATA, I changed load_users to use a more straightforward ao2_iterator.  
	  This plugged the leak but exposed an unload order issue between 
	  res_pjsip_phoneprov_provider, res_phoneprov and res_pjsip.

	  res_pjsip_phoneprov_provider unloads first, then res_phoneprov, then res_pjsip.  
	  Since res_pjsip_phoneprov_provider uses res_pjsip's sorcery instance, when it 
	  unloads, it's objects are still in the sorcery instance.  When res_pjsip 
	  unloads, it destroys all its objects including res_pjsip_phoneprov_provider's.  
	  The phoneprov destructor then attempts to unregister the extension from 
	  res_phoneprov but because res_phoneprov is already cleaned up, its users 
	  container is gone and we get a FRACK.

	  Simple solution, check for the NULL users container before attempting to remove 
	  the entry. Duh.

	  Ran tests/res_phoneprov/res_phoneprov_provider.  No leaks in 
	  res_pjsip_phoneprov_provider and no FRACKs.

	  Reported-by: Corey Farrell
	  Tested-by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/4608/
	  ASTERISK-24935 #close
	  ........

	  Merged revisions 434545 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434547 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-09 18:08 +0000 [9a63ada03a]  gtjoseph <george.joseph@fairview5.com>

	* loader/main: Don't set ast_fully_booted until deferred reloads are processed

	  Until we have a true module management facility it's sometimes necessary for one 
	  module to force a reload on another before its own load is complete.  If 
	  Asterisk isn't fully booted yet, these reloads are deferred.  The problem is 
	  that asterisk reports fully booted before processing the deferred reloads which 
	  means Asterisk really isn't quite ready when it says it is.

	  This patch moves the report of fully booted after the processing of the deferred 
	  reloads is complete.

	  Since the pjsip stack has the most number of related modules, I ran the 
	  channels/pjsip testsuite to make sure there aren't any issues.  All tests 
	  passed.

	  Tested-by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/4604/
	  ........

	  Merged revisions 434544 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434546 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-09 17:07 +0000 [520b9f2174]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: add CLI command to show global and system configuration

	  Added a new CLI command for res_pjsip that shows both global and system
	  configuration settings: pjsip show settings

	  ASTERISK-24918 #close
	  Reported by: Scott Griepentrog
	  Review: https://reviewboard.asterisk.org/r/4597/
	  ........

	  Merged revisions 434527 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434528 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-09 11:09 +0000 [b2b1f24af6]  Richard Mudgett <rmudgett@digium.com>

	* chan_iax2.c: Fix ref leak in iax2_request().

	  * Increased warning message format capability string buffer size in
	  iax2_request().

	  Review: https://reviewboard.asterisk.org/r/4601/
	  ........

	  Merged revisions 434510 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434511 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-09 11:05 +0000 [459171be12]  Richard Mudgett <rmudgett@digium.com>

	* bridge_native_rtp.c: Defer allocation and check if it fails in native_rtp_bridge_compatible().

	  Review: https://reviewboard.asterisk.org/r/4601/
	  ........

	  Merged revisions 434508 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434509 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-09 10:43 +0000 [3ef0a17b1f]  yaron nahum (License 6676)

	* res/res_pjsip_dlg_options: Add a module to handle in-dialog OPTIONS requests

	  This patch adds a new session supplement that handles in-dialog OPTIONS
	  requests. Said OPTIONS requests are sent a 200 OK, as an endpoint lookup
	  for the OPTIONS request would already have been done by the time the
	  session supplement receives the inbound request.

	  ASTERISK-24862 #close
	  Reported by: yaron nahum
	  patches:
	    res_pjsip_dlg_options.c submitted by yaron nahum (License 6676)
	  ........

	  Merged revisions 434506 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434507 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-09 09:58 +0000 [c08ebc6eeb]  Mark Michelson <mmichelson@digium.com>

	* Reduce duplication of common DNS code.

	  The NAPTR and SRV branches were worked on independently and
	  resulted in some code being duplicated in each. Since both
	  have been merged into trunk now, this patch reduces the
	  duplication by factoring out common code into its own
	  source files.



	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434490 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-09 07:57 +0000 [ea0098724e]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix autological comparisons

	  This fixes autological comparison warnings in the following:
	   * chan_skinny: letohl may return a signed or unsigned value, depending on the
	     macro chosen
	   * func_curl: Provide a specific cast to CURLoption to prevent mismatch
	   * cel: Fix enum comparisons where the enum can never be negative
	   * enum: Fix comparison of return result of dn_expand, which returns a signed
	     int value
	   * event: Fix enum comparisons where the enum can never be negative
	   * indications: tone_data.freq1 and freq2 are unsigned, and hence can never be
	     negative
	   * presencestate: Use the actual enum value for INVALID state
	   * security_events: Fix enum comparisons where the enum can never be negative
	   * udptl: Don't bother to check if the return value from encode_length is less
	     than 0, as it returns an unsigned int
	   * translate: Since the parameters are unsigned int, don't bother checking
	     to see if they are negative. The cast to unsigned int would already blow
	     past the matrix bounds.
	   * res_pjsip_exten_state: Use a temporary value to cache the return of
	     ast_hint_presence_state
	   * res_stasis_playback: Fix enum comparisons where the enum can never be
	     negative
	   * res_stasis_recording: Add an enum value for the case where the recording
	     operation is in error; fix enum comparisons
	   * resource_bridges: Use enum value as opposed to -1
	   * resource_channels: Use enum value as opposed to -1

	  Review: https://reviewboard.asterisk.org/r/4533
	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4533.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 434469 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434470 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434471 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 21:05 +0000 [2201e27340]  Stefan Engström (License 6691)

	* apps/app_queue: Prevent possible crash when evaluating queue penalty rules

	  Although it only occurred once, a crash occurred when a queue attempted to
	  evaluate a queue penalty rule that appeared to have already been destroyed.
	  In many locations in app_queue, a test is done to see if qe->pr is NULL;
	  however, when we dispose of a queue's penalty rules, we don't set the pointer
	  to NULL after free'ing it. This patch does that to prevent any dangling
	  pointers from lingering on the queue object.

	  Review: https://reviewboard.asterisk.org/r/4522

	  ASTERISK-23319 #close
	  Reported by: Vadim
	  patches:
	    rb4552.patch submitted by Stefan Engström (License 6691)
	  ........

	  Merged revisions 434448 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434449 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434450 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 13:32 +0000 [a759714101]  Jonathan Rose <jrose@digium.com>

	* res_pjsip_t38: Fix FAX failures when using PJSIP with authentication

	  Without this patch, if a PJSIP endpoint with udptl enabled and authentication
	  set attempted to use sendFax, the FAX session would fail during setup. This
	  was because the invite issued in response to being auth challenged would cause
	  the PJSIP channel performing the FAX to receive a second T38 framehook and
	  this would cause frames to be consumed in an inappropriate manner.

	  ASTERISK-24933 #close
	  Reported by: Jonathan Rose
	  Review: https://reviewboard.asterisk.org/r/4577/
	  ........

	  Merged revisions 434425 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434431 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 13:20 +0000 [09df34d880]  Richard Mudgett <rmudgett@digium.com>

	* Bridging: Eliminate the unnecessary make channel compatible with bridge operation.

	  When a channel enters the bridging system it is first made compatible with
	  the bridge and then the bridge technology makes the channel compatible
	  with the technology.  For all but the DAHDI native and softmix bridge
	  technologies the make channel compatible with the bridge step is an
	  effective noop because the other technologies allow all audio formats.
	  For the DAHDI native bridge technology it doesn't matter because it is not
	  an initial bridge technology and chan_dahdi allows only one native format
	  per channel.  For the softmix bridge technology, it is a noop at best and
	  harmful at worst because the wrong translation path could be setup if the
	  channel's native formats allow more than one audio format.

	  This is an intermediate patch for a series of patches aimed at improving
	  translation path choices.

	  * Removed code dealing with the unnecessary step of making the channel
	  compatible with the bridge.

	  ASTERISK-24841
	  Reported by: Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/4600/
	  ........

	  Merged revisions 434424 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434430 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 11:49 +0000 [8ec9a82b9a]  Maciej Szmigiero <mail@maciej.szmigiero.name> (license 6085)

	* Security/tcptls: MitM Attack potential from certificate with NULL byte in CN.

	  When registering to a SIP server with TLS, Asterisk will accept CA signed
	  certificates with a common name that was signed for a domain other than the
	  one requested if it contains a null character in the common name portion of
	  the cert. This patch fixes that by checking that the common name length
	  matches the the length of the content we actually read from the common name
	  segment. Some certificate authorities automatically sign CA requests when
	  the requesting CN isn't already taken, so an attacker could potentially
	  register a CN with something like www.google.com\x00www.secretlyevil.net
	  and have their certificate signed and Asterisk would accept that certificate
	  as though it had been for www.google.com - this is a security fix and is
	  noted in AST-2015-003.

	  ASTERISK-24847 #close
	  Reported by: Maciej Szmigiero
	  Patches:
	   asterisk-null-in-cn.patch submitted by mhej (license 6085)
	  ........

	  Merged revisions 434337 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 434338 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434384 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434385 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 11:31 +0000 [2bd9e008a7]  Richard Mudgett <rmudgett@digium.com>

	* format_cache.c: Add missing slin12 format to ast_format_cache_is_slinear().
	  ........

	  Merged revisions 434357 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434383 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 07:02 +0000 [3f54af689f]  Matt Jordan <mjordan@digium.com>

	* chan_iax2: Fix compilation issue due to funky merge

	  Don't mix declarations and code!


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434294 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 07:00 +0000 [a9b6a62461]  Jaco Kroon (License 5671)

	* chan_iax2: Fix crash caused by unprotected access to iaxs[peer->callno]

	  This patch fixes an access to the peer callnumber that is unprotected by a
	  corresponding mutex. The peer->callno value can be changed by multiple threads,
	  and all data inside the iaxs array must be procted by a corresponding lock
	  of iaxsl.

	  The patch moves the unprotected access to a location where the mutex is
	  safely obtained.

	  Review: https://reviewboard.asterisk.org/r/4599/

	  ASTERISK-21211 #close
	  Reported by: Jaco Kroon
	  patches:
	    asterisk-11.2.1-iax2_poke-segfault.diff submitted by Jaco Kroon (License 5671)
	  ........

	  Merged revisions 434291 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434292 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434293 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 06:54 +0000 [477536ef25]  Valentin Vidić (License 6697)

	* chan_sip: Handle IPv4 mapped IPv6 clients when NAT is enabled

	  When udpbindaddr is set to the IPv6 bind all address of '::', Asterisk will
	  attempt to handle both IPv4 and IPv6 addresses, although the information will
	  be stored in a struct with an AF_INET6 address type. However, the current
	  NAT handling code won't handle the IPv4 mapped IPv6 addresses correctly.
	  This patch adds an additional check for the mapped address case, allowing
	  the NAT code to handle clients even when the address is IPv6.

	  Review: https://reviewboard.asterisk.org/r/4563/

	  ASTERISK-18032 #close
	  Reported by: Christoph Timm
	  patches:
	    nat_with_ipv6.diff submitted by Valentin Vidić (License 6697)
	  ........

	  Merged revisions 434288 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434289 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434290 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 06:45 +0000 [b8fa8aa775]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix pointer-bool-converesion warnings

	  This patch fixes several warnings pointed out by the clang compiler.
	  * chan_pjsip: Removed check for data->text, as it will always be non-NULL.
	  * app_minivm: Fixed evaluation of etemplate->locale, which will always
	    evaluate to 'true'. This patch changes the evaluation to use
	    ast_strlen_zero.
	  * app_queue:
	    - Fixed evaluation of qe->parent->monfmt, which always evaluates to
	      true. Instead, we just check to see if the dereferenced pointer
	      evaluates to true.
	    - Fixed evaluation of mem->state_interface, wrapping it with a call to
	      ast_strlen_zero.
	  * res_smdi: Wrapped search_msg->mesg_desk_term with calls to ast_strlen_zero.

	  Review: https://reviewboard.asterisk.org/r/4541

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4541.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 434285 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434286 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434287 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-08 06:35 +0000 [016fba12e2]  Rodrigo Ramirez Norambuena (License 6577)

	* cel_pgsl: Add support for GMT timestamps

	  This patch adds a new option to cel_pgsl, "usegmtime", which causes timestamps
	  to be logged in GMT.

	  Review: https://reviewboard.asterisk.org/r/4571/

	  ASTERISK-23186 #close
	  Reported by: Rodrigo Ramirez Norambuena
	  patches:
	    cel_pgsql.c_add_usegmtime2.patch submitted by Rodrigo Ramirez Norambuena (License 6577)



	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434284 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-07 14:40 +0000 [d923ec80b9]  Scott Griepentrog <sgriepentrog@digium.com>

	* pjsip: resolve compatibility problem with ast_sip_session

	  A change in r430179 inserted a variable near the top of a
	  structure caused a problem when running DPMA in a version
	  of Asterisk compiled across the change.  This patch moves
	  the new variable to the end of the structure, eliminating
	  the problem.

	  Review: https://reviewboard.asterisk.org/r/4574/
	  ........

	  Merged revisions 433944 from http://svn.asterisk.org/svn/asterisk/branches/13
	  ........

	  Merged revisions 434261 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434263 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-07 11:42 +0000 [153c4044e4]  Kevin Harwell <kharwell@digium.com>

	* bridge.c: Hangup attended transfer target after it has been swapped out

	  After completing an attended transfer the transfer target channel (the one that
	  gets swapped out) was not being hung up after leaving the bridge. This resulted
	  in a channel possibly being left around. Added an explicit softhangup for the
	  channel in question after the transfer is successfully completed in order to
	  make sure the channel is hung up.

	  ASTERISK-24782 #close
	  Reported by: John Bigelow
	  Review: https://reviewboard.asterisk.org/r/4575/
	  ........

	  Merged revisions 434240 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434241 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-07 10:34 +0000 [1eba6abae5]  Mark Michelson <mmichelson@digium.com>

	* Do not queue message requests that we do not respond to.

	  If we receive a MESSAGE request that we cannot send a response
	  to, we should not send the incoming MESSAGE to the dialplan.

	  This commit should help the bouncing message_retrans test to
	  pass consistently.
	  ........

	  Merged revisions 434218 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434219 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-07 10:22 +0000 [c2f50ba6f4]  Matt Jordan <mjordan@digium.com>

	* ARI: Add the ability to intercept hold and raise an event

	  For some applications - such as SLA - a phone pressing hold should not behave
	  in the fashion that the Asterisk core would like it to. Instead, the hold
	  action has some application specific behaviour associated with it - such as
	  disconnecting the channel that initiated the hold; only playing MoH to channels
	  in the bridge if the channels are of a particular type, etc.

	  One way of accomplishing this is to use a framehook to intercept the
	  hold/unhold frames, raise an event, and eat the frame. Tasty. This patch
	  accomplishes that using a new dialplan function, HOLD_INTERCEPT.

	  In addition, some general cleanup of raising hold/unhold Stasis messages was
	  done, including removing some RAII_VAR usage.

	  Review: https://reviewboard.asterisk.org/r/4549/

	  ASTERISK-24922 #close
	  ........

	  Merged revisions 434216 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434217 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 21:10 +0000 [af4d802773]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix sometimes-initialized warning in func_math

	  This patch fixes a bug in a unit test in func_math where a variable could be
	  passed to ast_free that wasn't allocated. This patch corrects the issue and
	  ensures that we only attempt to free a variable if we previously allocated
	  it.

	  Review: https://reviewboard.asterisk.org/r/4552

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4552.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 434190 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434191 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434192 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 21:03 +0000 [c1cfe3fae2]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix non-literal-null-conversion warnings

	  Clang will flag errors when a char pointer is set to '\0', as opposed to a
	  value that the char pointer points to. This patch fixes this warning
	  in a variety of locations.

	  Review: https://reviewboard.asterisk.org/r/4551

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4551.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 434187 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434188 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434189 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 16:54 +0000 [79fb8c32a6]  Mark Michelson <mmichelson@digium.com>

	* Uncomment test case.



	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434170 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 16:13 +0000 [fc314cb43f]  Mark Michelson <mmichelson@digium.com>

	* Add missing DNS NAPTR test file.



	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434154 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 14:23 +0000 [87d7c90e4e]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: config option 'timers' can't be set to 'no'

	  When setting the configuration option 'timers' equal to 'no' the bit flag was
	  not properly negated. This patch clears all associated flags and only sets the
	  specified one. pjsip will handle any necessary flag combinations. Also went
	  ahead and did similar for the '100rel' option.

	  ASTERISK-24910 #close
	  Reported by: Ray Crumrine
	  Review: https://reviewboard.asterisk.org/r/4582/
	  ........

	  Merged revisions 434131 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434132 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 14:04 +0000 [e48f2e7897]  gtjoseph <george.joseph@fairview5.com>

	* build: Fixes for gcc 5 compilation

	  These are fixes for compilation under gcc 5.0...

	  chan_sip.c:    In parse_request needed to make 'lim' unsigned.
	  inline_api.h:  Needed to add a check for '__GNUC_STDC_INLINE__' to detect C99 
	                 inline semantics (same as clang).
	  ccss.c:        In ast_cc_set_parm, needed to fix weird comparison.
	  dsp.c:         Needed to work around a possible compiler bug.  It was throwing 
	                 an array-bounds error but neither
	                 sgriepentrog, rmudgett nor I could figure out why.
	  manager.c:     In action_atxfer, needed to correct an array allocation.

	  This patch will go to 11, 13, trunk.

	  Review: https://reviewboard.asterisk.org/r/4581/
	  Reported-by: Jeffrey Ollie
	  Tested-by: George Joseph
	  ASTERISK-24932 #close
	  ........

	  Merged revisions 434113 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434114 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434115 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 13:18 +0000 [0543879228]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Remove large chunks of unused code from extconf

	  This patch fixes a warning caught by clang, in which it detected that large
	  chunks of extconf were unused. Frankly, I wish we could pretend that all of
	  extconf was unused, but alas, that is not yet the case.

	  A few extraneous functions in the parking tests were removed as well, for
	  the same reason.

	  Review: https://reviewboard.asterisk.org/r/4553

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4553.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 434093 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434097 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434099 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 13:03 +0000 [e309a91e2d]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix sometimes-uninitialized warning in pbx_config

	  This patch fixes a warning caught by clang, in which a char pointer could be
	  assigned to before it was initialized. The patch re-organizes the code to
	  ensure that the pointer is always initialized, even on off nominal paths.

	  Review: https://reviewboard.asterisk.org/r/4529

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4529.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 434090 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434091 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434092 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 12:52 +0000 [ed3cf8761b]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix format specified in framehook

	  This patch fixes an invalid format specifier used in the formatting of an
	  ERROR message in the framehook code. The format specifier specifies a
	  type of 'unsigned short', but the argument passed to it is of type 'int'.
	  The patch changes the format specifier to 'i'.

	  Review: https://reviewboard.asterisk.org/r/4540

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4535.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 434087 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 434088 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434089 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 12:05 +0000 [0a26602b8c]  Mark Michelson <mmichelson@digium.com>

	* Merge NAPTR support into trunk.

	  This adds NAPTR record allocation and sorting, as well as
	  unit tests that verify that NAPTR records are parsed and
	  sorted correctly.

	  Review: https://reviewboard.asterisk.org/r/4542



	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434068 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 11:02 +0000 [edf9da4365]  Mark Michelson <mmichelson@digium.com>

	* Ensure that a non-zero sample rate is returned for all formats.

	  Versions of Asterisk prior to 12 defaulted to 8000 as a sample rate
	  if one was not provided by a format. In Asterisk 13, this was removed.
	  The result was that some calculations which involve dividing by the
	  sample rate resulted in dividing by 0. The fix being put in place
	  here is to have the same default fallback that was present in previous
	  versions of Asterisk.

	  Asterisk-24914 #close
	  Reported by Marcello Ceschia
	  ........

	  Merged revisions 434046 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434047 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 10:17 +0000 [ffd7319df3]  Corey Farrell <git@cfware.com>

	* res_pjsip_phoneprov_provider: Revert 433996 / 433997.

	  res_pjsip_phoneprov_provider is using ao2_callback with OBJ_MULTIPLE, then
	  ignoring the return.  OBJ_NODATA flag was to prevent a reference leak, but
	  this caused the module to FRACK on unload.  Revert change until this can
	  be investigated further.

	  ASTERISK-24935
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4578/
	  ........

	  Merged revisions 434025 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434026 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-06 09:51 +0000 [53af579d4c]  Mark Michelson (license #5049)

	* ParkedCall: Don't allow dialplan fallthrough after retrieving parked call.

	  This is a change to align behavior with that of Asterisk 11 and previous versions.
	  In those versions, if a parked call were retrieved, and the call ended, the parked
	  call retriever would be hung up after the ParkedCall application ran. Prior to this
	  patch, in Asterisk 13, the same situation would result in the parked call retriever
	  falling through to additional priorities in the extension where the ParkedCall
	  application was called. With this patch, the behavior between Asterisk 11 and 13
	  aligns.

	  ASTERISK-24899 #close
	  Reported by Malcolm Davenport
	  Patches:
	  	ASTERISK-24899.patch uploaded by Mark Michelson(license #5049)
	  ........

	  Merged revisions 434022 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434023 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-05 07:55 +0000 [e6f0410028]  Corey Farrell <git@cfware.com>

	* res_pjsip_phoneprov_provider: Fix leaked OBJ_MULTIPLE iterator.

	  res_pjsip_phoneprov_provider was using ao2_callback with OBJ_MULTIPLE, then
	  ignoring the return.  Added OBJ_NODATA flag to prevent a reference leak.

	  ASTERISK-24935 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4578/
	  ........

	  Merged revisions 433996 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433997 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-03 16:54 +0000 [3439487a81]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_messaging: Serialize outbound SIP MESSAGEs

	  Outbound SIP MESSAGEs had the potential to be sent out
	  of order from how they were specified in a set of
	  dialplan steps.

	  This change creates a serializer for sending outbound
	  MESSAGE requests on. This ensures that the MESSAGEs are
	  sent by Asterisk in the same order that they were sent
	  from the dialplan.

	  ASTERISK-24937 #close
	  Reported by Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/4579
	  ........

	  Merged revisions 433968 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433969 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-02 09:56 +0000 [6e5efe04bd]  Scott Griepentrog <sgriepentrog@digium.com>

	* pjsip: resolve compatibility problem with ast_sip_session

	  A change in r430179 inserted a variable near the top of a
	  structure caused a problem when running DPMA in a version
	  of Asterisk compiled across the change.  This patch moves
	  the new variable to the end of the structure, eliminating
	  the problem.

	  Review: https://reviewboard.asterisk.org/r/4574/
	  ........

	  Merged revisions 433944 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433945 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-02 05:38 +0000 [154ba47766]  Corey Farrell <git@cfware.com>

	* Tell menuselect that MALLOC_DEBUG conflicts with DEBUG_CHAOS.

	  DEBUG_CHAOS was marked as conflicting with MALLOC_DEBUG, but
	  for this to work correctly MALLOC_DEBUG must also be marked
	  as conflicting with DEBUG_CHAOS.

	  Review: https://reviewboard.asterisk.org/r/4557/
	  ........

	  Merged revisions 433923 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433924 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-01 11:30 +0000 [a217d2d1db]  Ashley Sanders <asanders@digium.com>

	* stasis: set a channel variable on websocket disconnect error

	  Resolve compile errors caused by r433863 by fixing the
	  documentation xml to comply with the schema.
	  ........

	  Merged revisions 433888 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433891 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-01 11:27 +0000 [39824e3d01]  Joshua Colp <jcolp@digium.com>

	* dns: Add support for SRV record parsing and sorting.

	  This change adds support for parsing SRV records and consuming their values
	  in an easy fashion. It also adds automatic sorting of SRV records according
	  to RFC 2782.

	  Tests have also been included which cover parsing, sorting, and off-nominal
	  cases where the record is corrupted.

	  ASTERISK-24931 #close
	  Reported by: Joshua Colp

	  Review: https://reviewboard.asterisk.org/r/4528/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433889 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-04-01 08:35 +0000 [da13d15425]  Mark Michelson <mmichelson@digium.com>

	* stasis: set a channel variable on websocket disconnect error

	  Resolve compile errors caused by r433839 by included the missing
	  header file, pbx.h.
	  ........

	  Merged revisions 433863 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433868 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-31 17:49 +0000 [06578ef407]  Ashley Sanders <asanders@digium.com>

	* stasis: set a channel variable on websocket disconnect error

	  When an error occurs while writing to a web socket, the web socket is
	  disconnected and the event is logged. A side-effect of this, however, is that
	  any application on the other side waiting for a response from Stasis is left
	  hanging indefinitely (as there is no mechanism presently available for
	  notifying interested parties about web socket error states in Stasis).

	  To remedy this scenario, this patch introduces a new channel variable:
	  STASISSTATUS.

	  The possible values for STASISSTATUS are:
	  SUCCESS         - The channel has exited Stasis without any failures
	  FAILED          - Something caused Stasis to croak. Some (not all) possible
	                    reasons for this:
	                      - The app registry is not instantiated;
	                      - The app requested is not registered;
	                      - The app requested is not active;
	                      - Stasis couldn't send a start message

	  ASTERISK-24802
	  Reported By: Kevin Harwell
	  Review: https://reviewboard.asterisk.org/r/4519/
	  ........

	  Merged revisions 433839 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433845 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-31 12:04 +0000 [2d28fa678e]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip: Fix expression in unit test /channels/chan_sip/test_sip_rtpqos.

	  Fix misplaced parentheses in original fabs() expression.
	  ........

	  Merged revisions 433816 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433817 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433818 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-31 06:55 +0000 [076fc12afb]  Corey Farrell <git@cfware.com>

	* Blocked revisions 433795

	  ........
	  Re-add _ast_mem_backtrace_buffer variable for ABI compatibility.

	  Modules built prior to commit of r4502 expect to link at runtime
	  to the variable _ast_mem_backtrace_buffer.  This change re-adds
	  the variable to the C file only.

	  Review: https://reviewboard.asterisk.org/r/4558/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433796 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-30 06:43 +0000 [8d12288d8a]  Corey Farrell <git@cfware.com>

	* Fix an ABI compatibility issue with ast_log_safe for modules.

	  Binary modules are sometimes built against the latest release of
	  Asterisk in each branch, and need to be compatible with all
	  releases of that branch.  This change ensures that utils.h only
	  uses ast_log_safe from the core.  For modules and utilities ast_log
	  is used instead.

	  Review: https://reviewboard.asterisk.org/r/4548/
	  ........

	  Merged revisions 433772 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433773 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433774 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-29 21:45 +0000 [7bc2345fb1]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix -Wabsolute-value warnings

	  This patch fixes several warnings caught by clang - in this case, usage of the
	  abs function on non-integer values. This patch uses labs and fabs, as
	  appropriate, in the various affected files.

	  Review: https://reviewboard.asterisk.org/r/4525

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4525.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433749 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433750 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433751 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-29 21:39 +0000 [ce59fabd5c]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix invalid enum conversion

	  This patch fixes some invalid enum conversion warnings caught by clang. In
	  particular:
	  * chan_sip: Several functions mixed usage of the st_refresher_param
	    enum and st_refresher enum. This patch corrects the functions to use the
	    right enum.
	  * chan_pjsip: Fixed mixed usage of ast_sip_session_t38state and ast_t38_state.
	  * strings: Fixed incorrect usage of AO2 flags with strings container.
	  * res_stasis: Change a return enumeration to stasis_app_user_event_res.

	  Review: https://reviewboard.asterisk.org/r/4535

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4535.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433746 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433747 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433748 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-29 21:29 +0000 [61577cbee6]  Matt Jordan <mjordan@digium.com>

	* main/stdtime/localtime: Fix warning introduced in r433720

	  The patch in r433720 caused a warning to be kicked back by gcc. It occurred
	  due to this check in unistd.h:

	      if (__nbytes > __bos0 (__buf))
	          return __read_chk_warn (__fd, __buf, __nbytes, __bos0 (__buf));

	  That is, if __nbytes is greater than the result of GCC's built-in object size
	  for the struct, we'll kick back a warning.

	  As it turns out, this is because there is an error in the code in the patch.
	  We are passing the address of the pointer to the struct, not iev, which is a
	  pointer to the struct. Hence, the number of bytes is probably going to be lot
	  larger than the number of bytes that make up a pointer! This patch changes
	  the code just read from the pointer to the struct - which fixes the warning.

	  ASTERISK-24917
	  ........

	  Merged revisions 433743 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433744 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433745 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-29 20:57 +0000 [072734692e]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Ignore -Wunused-command-line-argument

	  Asterisk's build system has a tendency to pass include directives for libraries
	  to everything compiled within a particular group of source files. This means
	  we pass the header for libxml2 to things that don't necessarily need it. As a
	  result, we ignore this particular warning.

	  Review: https://reviewboard.asterisk.org/r/4545/

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4545.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433720 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433721 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433722 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-29 20:53 +0000 [1cf949c489]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix warning for -Wgnu-variable-sized-type-not-at-end

	  This patch fixes a warning caught by clang, wherein a variable sized struct is
	  not located at the end of a struct. While the code in question actually
	  expected this, this is a good warning to watch for. Hence, this patch refactors
	  the code in question to not have two variable length elements in the same
	  struct.

	  Review: https://reviewboard.asterisk.org/r/4530/

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4530.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433717 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433718 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433719 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-28 07:56 +0000 [d2776d4d45]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix a variety of "unused" warnings

	  This patch fixes the -Wunused-value -Wunused-variable -Wunused-const-variable
	  errors caught by clang. Specifically:

	  * apps/app_queue.c: removed unused qpm_cmd_usage[], qum_cmd_usage[],
	                      qsmp_cmd_usage[]
	  * cel/cel_sqlite3_custom.c: removed unused name[] = "cel_sqlite3_custom"
	  * channels/chan_pjsip.c: removed unused desc[] = "PJSIP Channel"
	  * codecs/gsm/src/gsm_create.c: removed unused ident[] = "$Header$"
	  * funcs/func_env.c:729: Fixed ast_str_append_substr.
	  * main/editline/np/strlcat.c: removed unused rcsid variable
	  * main/editline/np/strlcpy.c: removed unused rcsid variable
	  * main/security_events.c: removed unused TIMESTAMP_STR_LEN
	  * utils/conf2ael.c: removed unused cfextension_states
	  * utils/extconf.c: removed unused cfextension_states

	  Review: https://reviewboard.asterisk.org/r/4526

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4526.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433693 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433694 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433695 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-28 07:48 +0000 [cb7b6bc4be]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix -Wself-assign

	  Assigning a variable to itself isn't super useful. However, the WAV format
	  modules make use of this in order to perform byte endian checks. This patch
	  works around the warning by only performing the self assignment if we are
	  going to do more than just assign it to ourselves. Which is odd, but true.

	  Review: https://reviewboard.asterisk.org/r/4544/

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4544.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433690 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433691 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433692 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-28 07:41 +0000 [e9520dbe0d]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix -Wparantheses-equality warnings

	  Clang will treat ((a == b)) as a warning, as it reasonably expects that the
	  developer may have intended to write (a == b) or ((a = b)). This patch cleans
	  up all instances where equality, not assignment, was intended between two
	  parantheses.

	  Review: https://reviewboard.asterisk.org/r/4531/

	  ASTERISK-24917
	  Repoted by: dkdegroot
	  patches:
	    rb4531.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433687 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433688 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433689 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-28 07:33 +0000 [fd50e5bfb5]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix -Wbitfield-constant-conversion warning

	  In chan_iax2, we attempt to assign a -1 to a bitfield. This gets caught by
	  clang, as it will truncate the -1 to a 1 implicitly.

	  Instead, we just assign the value a '1'.

	  Review: https://reviewboard.asterisk.org/r/4537/

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4537.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433683 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433684 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433686 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-28 07:32 +0000 [c747b3b12a]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix -Winitializer-overrides

	  This patch fixes clange compiler warnings for initializer overrides.
	  Specifically:

	  res_pjsip/config_transport maps PJSIP_TLSV1_METHOD to the same enumeration
	  value as PJSIP_SSL_DEFAULT_METHOD. When initializing an array containing
	  those enum values, we therefore initialize the value twice to two different
	  values, "tlsv1" and "default". This patch changes it to just initialize
	  the index in the array to "tlsv1".

	  Review: https://reviewboard.asterisk.org/r/4539/

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4539.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433682 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433685 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-28 07:20 +0000 [d6173cd1d0]  Diederik de Groot <dkgroot@talon.nl> (License 6600)

	* clang compiler warnings: Fix -Wunused-function; make inline function static

	  This patch fixes clang compilers warnings for unused functions. Specifically:
	   * channels/chan_iax2: removed user_ref function
	   * main/dsp.c: removed goertzel_update function
	   * main/config.c: made variable_list_switch static

	  Review: https://reviewboard.asterisk.org/r/4527

	  ASTERISK-24917
	  Reported by: dkdegroot
	  patches:
	    rb4527.patch submitted by dkdegroot (License 6600)
	  ........

	  Merged revisions 433678 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433680 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433681 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-27 17:26 +0000 [b56592e3ae]  Jonathan Rose <jrose@digium.com>

	* SAC: Add conferencing extensions and configuration

	  Review: https://reviewboard.asterisk.org/r/4504/
	  ........

	  Merged revisions 433656 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433657 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-27 16:21 +0000 [c21e2e45a8]  Rusty Newton <rnewton@digium.com>

	* configs/basic-pbx - Super Awesome Company example configs Phase 1, Patch 2

	  Example configuration files for a "basic PBX" deployment for the fictitious
	  Super Awesome Company. Details at https://reviewboard.asterisk.org/r/4488/
	  and https://wiki.asterisk.org/wiki/display/AST/Super+Awesome+Company

	  Patch 4488 includes all functionality needed for SAC's outside connectivity
	  and some externally accessed features, as well as outbound dialing.

	  Reported by: Malcolm Davenport
	  Tested by: Rusty Newton

	  Review: https://reviewboard.asterisk.org/r/4488/
	  ........

	  Merged revisions 433624 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433637 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-27 16:06 +0000 [2659e48d9d]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_registrar_expire.c: Made use ao2 container template routines and eliminated some RAII_VAR() usage.

	  * Converted the contact_autoexpire container to use the ao2 template hash
	  and cmp functions.  Also made use the OBJ_SEARCH_xxx names instead of the
	  deprecated names.

	  * Eliminates several unnecessary uses of RAII_VAR().

	  Review: https://reviewboard.asterisk.org/r/4524/
	  ........

	  Merged revisions 433622 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433623 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-27 15:46 +0000 [0b62e41654]  Mark Michelson <mmichelson@digium.com>

	* Add stateful PJSIP response API call, and use it for out-of-dialog responses.

	  Asterisk had an issue where retransmissions of MESSAGE requests resulted in
	  Asterisk processing the retransmission as if it were a new MESSAGE request.

	  This patch fixes the issue by creating a transaction in PJSIP on the incoming
	  request. This way, if a retransmission arrives, the PJSIP transaction layer
	  will resend the response and Asterisk will not ever see the retransmission.

	  ASTERISK-24920 #close
	  Reported by Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/4532/
	  ........

	  Merged revisions 433619 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433620 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-27 15:23 +0000 [a18da4eaf2]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_registrar_expire.c: Cleanup scheduler leaks on unload/shutdown.

	  Contact expiration object refs were leaked when the module was unloaded.

	  * Made empty the scheduler of entries before destroying it to release the
	  object ref held by the scheduler entry.

	  Review: https://reviewboard.asterisk.org/r/4523/
	  ........

	  Merged revisions 433596 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433617 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-27 12:58 +0000 [cb1c639817]  Richard Mudgett <rmudgett@digium.com>

	* Add missing file.  ASTERISK-24781

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433597 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-27 09:41 +0000 [a024af1156]  Justin T. Gibbs <gibbs@scsiguy.org> (License 6692)

	* res/res_timing_kqueue: Update the module to conform to current timer API

	  This patch updates the kqueue timing module to conform to current timer API.

	  This fixes issues with using the kqueue timing source on Asterisk 13 on
	  FreeBSD 10. These issues include:

	  - Remove support for kevent64().  The values used to support Asterisk timers
	    fit within 32bits and so can be handled on all platforms via kevent().

	  - Provide debug logging for, but do not track, unacked events.  This matches
	    the behavior of all other timer implementations.

	  - Implement continuous mode by triggering and leaving active, a user event.
	    This ensures that the file descriptor for the timer returns immediately from
	    poll(), without placing the load of a high speed timer on the kernel.

	  - In kqueue_timer_get_max_rate(), don't overstate the capability of the timer.
	    On some platforms, UINT_MAX is greater than INTPTR_MAX, the largest integer
	    type kqueue supports for timers.

	  - In kqueue_timer_get_event(), assume the caller woke up from poll() and just
	    return the mode the timer is currently in. This matches all other timer
	    implementations.

	  - Adjust the test code now that unacked events are not tracked.

	  Review: https://reviewboard.asterisk.org/r/4465/

	  ASTERISK-24857 #close
	  Reported by: scsiguy
	  Tested by: Ed Hynan
	  patches:
	    rb4465.patch submitted by scsiguy (License 6692)
	  ........

	  Merged revisions 433574 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433575 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-27 07:27 +0000 [10458d2878]  Corey Farrell <git@cfware.com>

	* Fix link error for utils/aelparse.

	  Use the standard ast_log instead of ast_log_safe for STANDALONE programs.

	  Review: https://reviewboard.asterisk.org/r/4538/
	  ........

	  Merged revisions 433549 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433550 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433551 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-27 02:12 +0000 [28e3bd0af7]  Corey Farrell <git@cfware.com>

	* Improved and portable ast_log recursion avoidance

	  This introduces a new logger routine ast_log_safe.  This routine should be
	  used for all error messages in code that can be run as a result of ast_log.
	  ast_log_safe does nothing if run recursively.  All error logging in
	  astobj2.c, strings.c and utils.h have been switched to ast_log_safe.

	  This required adding support for raw threadstorage.  This provides direct
	  access to the void* pointer in threadstorage.  In ast_log_safe, NULL is used
	  to signify that this thread is not already running ast_log_safe, (void*)1 when
	  it is already running.  This was done since it's critical that ast_log_safe
	  do nothing that could log during recursion checking.

	  ASTERISK-24155 #close
	  Reported by: Timo Teräs
	  Review: https://reviewboard.asterisk.org/r/4502/
	  ........

	  Merged revisions 433522 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433523 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433524 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-26 18:09 +0000 [554eb74516]  Corey Farrell <git@cfware.com>

	* Fix compile errors caused by r4500 / r4501.

	  * Add ast_register_cleanup to utils/clicompat.c to deal with
	    any utils that copy sources from main.
	  * Asterisk 13+: remove unused variables from core_local.c.

	  Review: https://reviewboard.asterisk.org/r/4534/
	  ........

	  Merged revisions 433499 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433500 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433501 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-26 17:24 +0000 [3ddd92902a]  Corey Farrell <git@cfware.com>

	* Replace most uses of ast_register_atexit with ast_register_cleanup.

	  Since 'core stop now' and 'core restart now' do not stop modules,
	  it is unsafe for most of the core to run cleanups.  Originally all
	  cleanups used ast_register_atexit, and were only changed when it
	  was shown to be unsafe.  ast_register_atexit is now used only when
	  absolutely required to prevent corruption and close child processes.

	  Exceptions that need to use ast_register_atexit:
	  * CDR: Flush records.
	  * res_musiconhold: Kill external applications.
	  * AstDB: Close the DB.
	  * canary_exit: Kill canary process.

	  ASTERISK-24142 #close
	  Reported by: David Brillert

	  ASTERISK-24683 #close
	  Reported by: Peter Katzmann

	  ASTERISK-24805 #close
	  Reported by: Badalian Vyacheslav

	  ASTERISK-24881 #close
	  Reported by: Corey Farrell

	  Review: https://reviewboard.asterisk.org/r/4500/
	  Review: https://reviewboard.asterisk.org/r/4501/
	  ........

	  Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433497 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433498 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-26 12:47 +0000 [d7fc85e69d]  Corey Farrell <git@cfware.com>

	* res_pjsip: Enable unload of all modules at shutdown.

	  * Move most of res_pjsip:module_unload to unload_pjsip to resolve crashes
	    caused by running PJSIP functions from non-PJSIP threads.
	  * Remove call to pjsip_endpt_destroy(ast_pjsip_endpoint), it was causing
	    crashes in some cases.  In theory pj_shutdown() should take care of this.
	  * Mark res_pjsip_keepalive and res_pjsip_session as allowed to unload at
	    shutdown.
	  * Resolve leaked config global in res_pjsip_notify.
	  * Unregister pubsub pjsip service module.
	  * Implement cleanup for res_pjsip_session.

	  ASTERISK-24731 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4498/
	  ........

	  Merged revisions 433469 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433470 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-26 12:13 +0000 [ab674f67b5]  Kevin Harwell <kharwell@digium.com>

	* app_confbridge: file playback blocks dtmf

	  Attempting to execute DTMF in a confbridge while file playback (prompt,
	  announcement, etc) is occurring is not allowed. You have to wait until
	  the sound file has completed before entering DTMF. This patch fixes it
	  so that app_confbridge now monitors for dtmf key presses during menu
	  driven file playback. If a key is pressed playback stops and it executes
	  the matched menu option.

	  ASTERISK-24864 #close
	  Reported by: Steve Pitts
	  Review: https://reviewboard.asterisk.org/r/4510/
	  ........

	  Merged revisions 433445 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433446 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433447 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-25 13:37 +0000 [e953d15223]  Richard Mudgett <rmudgett@digium.com>

	* A couple minor cleanup tweaks.

	  * In res/res_sorcery_realtime.c: Broke long line.

	  * In main/bucket.c: Eliminated unnecessary NULL check as
	  ast_sorcery_unref() is NULL tolerant and set the global object to NULL
	  after unref in the system shutdown bucket_cleanup().
	  ........

	  Merged revisions 433420 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433421 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-25 10:31 +0000 [47156aab92]  Simon Arlott (License 5756)

	* res_xmpp: Buddies are always auto-registered when processing the roster

	  Due to a quirk in the configuration handling of res_xmpp, the 'autoregister'
	  setting was never actually processed. This was due to not properly copying
	  over the global settings to the client settings when applying the
	  configuration to the run-time object.

	  Review: https://reviewboard.asterisk.org/r/4496/

	  ASTERISK-14233
	  ASTERISK-24780 #close
	  Reported by: Simon Arlott
	  patches:
	    asterisk-13.1.0-24780 uploaded by Simon Arlott (License 5756)
	  ........

	  Merged revisions 433395 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433396 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433397 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-25 07:32 +0000 [abf3e40902]  Joshua Colp <jcolp@digium.com>

	* dns: Add core DNS API + unit tests and res_resolver_unbound module + unit tests.

	  This change adds an abstracted core DNS API which resembles the API described
	  here[1]. The API provides a pluggable mechanism for resolvers and also a
	  consistent view for records. Both synchronous and asynchronous queries are
	  supported.

	  This change also adds a res_resolver_unbound module which uses the libunbound
	  library to provide resolution.

	  Unit tests have also been written for all of the above to confirm the API and
	  functionality.

	  ASTERISK-24834 #close
	  Reported by: Matt Jordan

	  ASTERISK-24836 #close
	  Reported by: Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/4474/
	  Review: https://reviewboard.asterisk.org/r/4512/

	  [1] https://wiki.asterisk.org/wiki/display/AST/Asterisk+DNS+API


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433370 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-24 14:41 +0000 [4c2fc5b811]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip: Add "rpid_immediate" option to prevent unnecessary "180 Ringing" messages.

	  Incoming PJSIP call legs that have not been answered yet send unnecessary
	  "180 Ringing" or "183 Progress" messages every time a connected line
	  update happens.  If the outgoing channel is also PJSIP then the incoming
	  channel will always send a "180 Ringing" or "183 Progress" message when
	  the outgoing channel sends the INVITE.

	  Consequences of these unnecessary messages:

	  * The caller can start hearing ringback before the far end even gets the
	  call.

	  * Many phones tend to grab the first connected line information and refuse
	  to update the display if it changes.  The first information is not likely
	  to be correct if the call goes to an endpoint not under the control of the
	  first Asterisk box.

	  When connected line first went into Asterisk in v1.8, chan_sip received an
	  undocumented option "rpid_immediate" that defaults to disabled.  When
	  enabled, the option immediately passes connected line update information
	  to the caller in "180 Ringing" or "183 Progress" messages as described
	  above.

	  * Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or
	  "183 Progress" messages.  The default is "no" to disable sending the
	  unnecessary messages.

	  ASTERISK-24781 #close
	  Reported by: Richard Mudgett

	  Review: https://reviewboard.asterisk.org/r/4473/
	  ........

	  Merged revisions 433338 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433339 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-22 19:05 +0000 [60f01520e7]  snuffy <snuffy22@gmail.com> (License 5024)

	* Fix compilations errors on 64-bit OpenBSD systems

	  In versiong 5.5, OpenBSD went to 64-bit time values. This requires a cast to
	  (long) when printing members of certain time structs.

	  Review: https://reviewboard.asterisk.org/r/4507

	  ASTERISK-24879 #close
	  Reported by: snuffy
	  Tested by: snuffy
	  patches:
	    openbsd-time64.diff uploaded by snuffy (License 5024)
	  ........

	  Merged revisions 433268 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433269 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433270 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-22 18:11 +0000 [66670f02e6]  snuffy <snuffy22@gmail.com> (License 5024)

	* Fix compilation issues for OpenBSD

	  This patch addresses compilation issues for OpenBSD. Specifically, it
	  addresses:
	   * It allows including <sys/vmmeter.h> in asterisk.c
	   * Provides a needed (size_t) cast in xmldoc.c

	  In 13+, it also addresses a conditional inclusion in loader.c.

	  Review: https://reviewboard.asterisk.org/r/4506

	  ASTERISK-24880 #close
	  Reported by: snuffy
	  Tested by: snuffy
	  patches:
	    misc-openbsd.diff uploaded by snuffy (License 5024)
	  ........

	  Merged revisions 433245 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433247 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433248 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-20 14:54 +0000 [7e097bce86]  Richard Mudgett <rmudgett@digium.com>

	* Audit ast_pjsip_rdata_get_endpoint() usage for ref leaks.

	  Valgrind found some memory leaks associated with
	  ast_pjsip_rdata_get_endpoint().  The leaks would manifest when sending
	  responses to OPTIONS requests, processing MESSAGE requests, and
	  res_pjsip supplements implementing the incoming_request callback.

	  * Fix ast_pjsip_rdata_get_endpoint() endpoint ref leaks in
	  res/res_pjsip.c:supplement_on_rx_request(),
	  res/res_pjsip/pjsip_options.c:send_options_response(),
	  res/res_pjsip_messaging.c:rx_data_to_ast_msg(), and
	  res/res_pjsip_messaging.c:send_response().

	  * Eliminated RAII_VAR() use with ast_pjsip_rdata_get_endpoint() in
	  res/res_pjsip_nat.c:nat_on_rx_message().

	  * Fixed inconsistent but benign return value in
	  res/res_pjsip/pjsip_options.c:options_on_rx_request().

	  Review: https://reviewboard.asterisk.org/r/4511/
	  ........

	  Merged revisions 433222 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433223 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-20 13:27 +0000 [148e8799fe]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_sdp_rtp,sorcery: Fix invalid access and memory leak respectively.

	  Valgrind found a memory leak and invalid access.

	  * Fix invalid access by sscanf() being fed a non-nul terminated string of
	  digits in res/res_pjsip_sdp_rtp.c:get_codecs().

	  * Fix memory leak in main/sorcery.c:sorcery_object_field_destructor().

	  * Fix potential NULL pointer dereference in
	  main/xmldoc.c:xmldoc_get_syntax_config_option().

	  Review: https://reviewboard.asterisk.org/r/4513/
	  ........

	  Merged revisions 433199 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433200 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-19 14:20 +0000 [627cc16a8d]  Matt Jordan <mjordan@digium.com>

	* funcs/func_env: Fix regression caused in FILE read operation

	  When r432935 was merged, it did correctly fix a situation where a FILE read
	  operation on the middle of a file buffer would not read the requested length
	  in the parameters passed to the FILE function. Unfortunately, it would also
	  allow the FILE function to append more bytes than what was available in the
	  buffer if the length exceeded the end of the buffer length.

	  This patch takes the minimum of the remaining bytes in the buffer along with
	  the calculated length to append provided by the original patch, and uses
	  that as the length to append in the return result. This patch also updates
	  the unit tests with the scenarios that were originally pointed out in
	  ASTERISK-21765 that the original implementation treated incorrectly.

	  ASTERISK-21765
	  ........

	  Merged revisions 433173 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433174 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433175 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-19 10:27 +0000 [79a81fed59]  Kevin Harwell <kharwell@digium.com>

	* alemebic scripts: endpoint identifier order option

	  The script was added in 13, but when committed to trunk it caused a branch to
	  occur due to some trunk only alemebic changes. This fixes it so that the new
	  'add_pjsip_endpoint_identifier_order script points to the correct down revision.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433152 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-19 05:21 +0000 [3aa0a869c2]  Corey Farrell <git@cfware.com>

	* logger: Apply default console logging when configuration cannot be loaded.

	  When logger.conf is missing or invalid enable console logging and display
	  an error message.

	  ASTERISK-24817 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4497/
	  ........

	  Merged revisions 433122 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433126 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433130 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-19 04:57 +0000 [d486659502]  Corey Farrell <git@cfware.com>

	* chan_sip: Simplify dialog/peer references, improve REF_DEBUG output.

	  * Replace functions for ref/undef of dialogs and peers with macro's
	    to call ao2_t_bump/ao2_t_cleanup.
	  * Enable passthough of REF_DEBUG caller information to sip_alloc and
	    find_call.

	  ASTERISK-24882 #close 
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4189/
	  ........

	  Merged revisions 433115 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433116 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-19 04:46 +0000 [2c83ac4364]  Corey Farrell <git@cfware.com>

	* chan_sip: Fix dialog reference leaked to scheduler for reinvite_timeout.

	  Release the scheduler reference to the dialog for reinvite timeout during
	  dialog_unlink_all.

	  ASTERISK-24876 #close 
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4491/
	  ........

	  Merged revisions 433112 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433113 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433114 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-17 21:42 +0000 [e0ea490a11]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session: Fix off-nominal extra unref of session.
	  ........

	  Merged revisions 433088 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433089 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-17 17:15 +0000 [8c65c9167e]  Scott Griepentrog <sgriepentrog@digium.com>

	* Various: bugfixes found via chaos

	  Using DEBUG_CHAOS several instances of a null
	  pointer crash, and one uninitialized variable
	  were uncovered and fixed.  Also added details
	  on why Asterisk failed to initialize.

	  Review: https://reviewboard.asterisk.org/r/4468/
	  ........

	  Merged revisions 433064 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433065 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-17 17:03 +0000 [f25b265329]  Scott Griepentrog <sgriepentrog@digium.com>

	* core: Introduce chaos into memory allocations

	  Locate potential crashes by exercising seldom
	  used code paths.  This patch introduces a new
	  define DEBUG_CHAOS, and mechanism to randomly
	  return an error condition from functions that
	  will seldom do so.  Functions that handle the
	  allocation of memory get the first treatment.

	  Review: https://reviewboard.asterisk.org/r/4463/
	  ........

	  Merged revisions 433060 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433063 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-17 17:03 +0000 [62cf2a2c02]  Scott Griepentrog <sgriepentrog@digium.com>

	* Reverting accidental ci of wrong change in r433061


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433062 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-17 17:00 +0000 [cb6c7eecfd]  Scott Griepentrog <sgriepentrog@digium.com>

	* various: cleanup issues found during leak hunt

	  In this collection of small patches to prevent
	  Valgrind errors are: fixes for reference leaks
	  in config hooks, evaluating a parameter beyond
	  bounds, and accessing a structure after a lock
	  where it could have been already free'd.

	  Review: https://reviewboard.asterisk.org/r/4407/
	  ........

	  Merged revisions 431583 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433061 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-17 16:52 +0000 [c41dd32b94]  Richard Mudgett <rmudgett@digium.com>

	* Audit ast_sockaddr_resolve() usage for memory leaks.

	  Valgrind found some memory leaks associated with ast_sockaddr_resolve().
	  Most of the leaks had already been fixed by earlier memory leak hunt
	  patches.  This patch performs an audit of ast_sockaddr_resolve() and found
	  one more.

	  * Fix ast_sockaddr_resolve() memory leak in
	  apps/app_externalivr.c:app_exec().

	  * Made main/netsock2.c:ast_sockaddr_resolve() always set the addrs
	  parameter for safety so the pointer will never be uninitialized on return.
	  The same goes for res/res_pjsip_acl.c:extract_contact_addr().

	  * Made functions that call ast_sockaddr_resolve() with RAII_VAR()
	  controlling the addrs variable use ast_free instead of ast_free_ptr to
	  provide better MALLOC_DEBUG information.

	  Review: https://reviewboard.asterisk.org/r/4509/
	  ........

	  Merged revisions 433056 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 433057 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433058 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-17 13:35 +0000 [803a916334]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: Allow configuration of endpoint identifier query order

	  Updated some documentation stating that endpoint identifiers registered without
	  a name are place at the front of the lookup list. Also renamed register method
	  'ast_sip_register_endpoint_identifier_by_name' to
	  'ast_sip_register_endpoint_identifier_with_name'

	  ASTERISK-24840
	  Reported by: Mark Michelson
	  ........

	  Merged revisions 433031 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433032 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-17 13:22 +0000 [aef7278af6]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: Allow configuration of endpoint identifier query order

	  This patch fixes previously reverted code that caused binary incompatibility
	  problems with some modules. And like the original patch it makes sure that
	  no matter what order the endpoint identifier modules were loaded, priority is
	  given based on the ones specified in the new global 'endpoint_identifier_order'
	  option.

	  ASTERISK-24840
	  Reported by: Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/4489/
	  ........

	  Merged revisions 433028 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433029 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-17 11:11 +0000 [259e833e88]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Add reason comment.
	  ........

	  Merged revisions 433005 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433006 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-13 21:29 +0000 [e89f83b3ad]  Matt Jordan <mjordan@digium.com>

	* main/frame: Don't report empty disallow values as an error

	  In realtime, it is normal to have a database with both 'allow' and 'disallow'
	  columns in the schema. It is perfectly valid to have an 'allow' value of
	  '!all,g722,ulaw,alaw' and no 'disallow' value. Unlike in static conf files,
	  you can't *not* provide the disallow value. Thus, the empty disallow value
	  causes a spurious WARNING message, which is kind of annoying.

	  This patch makes it so that a 'disallow' value with no ... value ... is
	  ignored. Granted, you can still screw this up as well, as technically
	  specifying 'disallow=all,!ulaw' allows only ulaw, and then you would have no
	  'allow' value in your database. But really, why would you do that? WHY?

	  ASTERISK-16779 #close
	  Reported by: Atis Lezdins
	  ........

	  Merged revisions 432970 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432971 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432972 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-13 21:01 +0000 [0d52907d2b]  Joshua Colp <jcolp@digium.com>

	* func_curl: Don't hold exclusive lock when performing HTTP request.

	  This code originally kept a lock held when performing the HTTP
	  request to ensure that the options provided to curl remain valid.
	  This doesn't seem to be necessary these days and holding the lock
	  caused requests to happen sequentially instead of in parallel.

	  ASTERISK-18708 #close
	  Reported by: Dave Cabot
	  ........

	  Merged revisions 432948 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432949 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432950 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-13 20:53 +0000 [ac1214d9d4]  Jan Juergens (License 6538)

	* apps/app_sms: Add an option to prevent SMS content from being logged

	  In some countries, privacy laws specify that SMS content cannot be saved by a
	  provider. This patch adds a new option to the SMS application, 'n', which
	  prevents the SMS content from being written to the SMS log.

	  ASTERISK-22591 #close
	  Reported by: Jan Juergens
	  patches:
	    DisableSmsContentLoggingByParam.patch uploaded by Jan Juergens (License 6538)


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432947 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-13 20:37 +0000 [b3fa35786f]  Joshua Colp <jcolp@digium.com>

	* core: Fix tab completion of "core set debug channel" CLI command.

	  The "core set debug channel" CLI command mistakenly had source filenames
	  added to its tab completion. This occurred because the CLI generator fell back
	  to the "core set debug" command which permits setting debug at a source
	  filename level.

	  ASTERISK-21038 #close
	  Reported by: Richard Kenner
	  ........

	  Merged revisions 432944 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432945 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432946 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-13 20:22 +0000 [b4cc056067]  Di-Shi Sun (License 5076)

	* FILE: fix retrieval of file contents when offset is specified

	  The loop that reads in a file was not correctly using the offset when
	  determining what bytes to append to the output. This patch corrects
	  the logic such that the correct portion of the file is extracted when an
	  offset is specified.

	  ASTERISK-21765
	  Reported by: John Zhong
	  Tested by: Matt Jordan, Di-Shi Sun
	  patches:
	    file_read_390821.patch uploaded by Di-Shi Sun (License 5076)
	  ........

	  Merged revisions 432935 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432938 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432940 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-13 19:24 +0000 [dc752f515b]  Matt Jordan <mjordan@digium.com>

	* apps/app_amd: Document maximum_word_length option; fix AMDCAUSE documentation

	  This patch corrects the documentation for the AMD application. Specifically:
	  * It documents the maximum_word_length option, which limits the maximum allowed
	    length of a single utterance.
	  * It clarifies the AMDCAUSE values MAXWORDS and MAXWORDLENGTH. MAXWORDLENGTH
	    was documented as MAXWORDS, while MAXWORDS was undocumented.

	  Thanks to the issue reporter, Frank DiGennaro, for pointing out the issues.

	  ASTERISK-19470 #close
	  Reported by: Frank DiGennaro
	  ........

	  Merged revisions 432918 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432920 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432921 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-13 12:06 +0000 [c52adca396]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip: AMI action PJSIPShowEndpoint closes AMI connection on error.

	  Also fixed similar problem with AMI action PJSIPShowEndpoints.

	  ASTERISK-24872 #close
	  Reported by: Dmitriy Serov

	  Review: https://reviewboard.asterisk.org/r/4487/
	  ........

	  Merged revisions 432894 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432895 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-13 11:37 +0000 [636d82f4d8]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip/res_pjsip_callerid: Make Party ID handling simpler and consistent.

	  The res_pjsip modules were manually checking both name and number
	  presentation values when there is a function that determines the combined
	  presentation for a party ID struct.  The function takes into account if
	  the name or number components are valid while the manual code rarely
	  checked if the data was even valid.

	  * Made use ast_party_id_presentation() rather than manually checking party
	  ID presentation values.

	  * Ensure that set_id_from_pai() and set_id_from_rpid() will not return
	  presentation values other than what is pulled out of the SIP headers.  It
	  is best if the code doesn't assume that AST_PRES_ALLOWED and
	  AST_PRES_USER_NUMBER_UNSCREENED are zero.

	  * Fixed copy paste error in add_privacy_params() dealing with RPID
	  privacy.

	  * Pulled the id->number.valid test from add_privacy_header() and
	  add_privacy_params() up into the parent function add_id_headers() to skip
	  adding PAI/RPID headers earlier.

	  * Made update_connected_line_information() not send out connected line
	  updates if the connected line number is invalid.  Lower level code would
	  not add the party ID information and thus the sent message would be
	  unnecessary.

	  * Eliminated RAII_VAR usage in send_direct_media_request().

	  Review: https://reviewboard.asterisk.org/r/4472/
	  ........

	  Merged revisions 432892 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432893 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-13 09:55 +0000 [d42c6adb1a]  Kevin Harwell <kharwell@digium.com>

	* Revert - res_pjsip: Allow configuration of endpoint identifier query order

	  Due to a break in binary compatibility with some other modules these changes
	  are being reverted until the issue can be resolved.

	  ASTERISK-24840
	  Reported by: Mark Michelson
	  ........

	  Merged revisions 432868 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432869 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-12 21:10 +0000 [f2c21ead1f]  Corey Farrell <git@cfware.com>

	* Logger: Fix MALLOC_DEBUG build error.

	  Revision 432834 introduced a build error when MALLOC_DEBUG
	  is used.  Switch callid threadstorage to simple
	  AST_THREADSTORAGE since we no longer need custom cleanup.

	  Reported by: Corey Farrell


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432851 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-12 20:12 +0000 [c08fd275bf]  Corey Farrell <git@cfware.com>

	* Logger: Convert 'struct ast_callid' to unsigned int.

	  Switch logger callid's from AO2 objects to simple integers.
	  This helps in two ways.  Copying integers is faster than
	  referencing AO2 objects, so this will result in a small
	  reduction in logger overhead.  This also erases the possibility
	  of an infinate loop caused by an invalid callid in
	  threadstorage.

	  ASTERISK-24833 #comment Committed callid conversion to trunk. 
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4466/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432834 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-12 07:58 +0000 [38ee441ea7]  Matt Jordan <mjordan@digium.com>

	* main/audiohook: Update internal sample rate on reads

	  When an audiohook is created (which is used by the various Spy applications
	  and Snoop channel in Asterisk 13+), it initially is given a sample rate of
	  8kHz. It is expected, however, that this rate may change based on the media
	  that passes through the audiohook. However, the read/write operations on the
	  audiohook behave very differently.

	  When a frame is written to the audiohook, the format of the frame is checked
	  against the internal sample rate. If the rate of the format does not match
	  the internal sample rate, the internal sample rate is updated and a new SLIN
	  format is chosen based on that sample rate. This works just fine.

	  When a frame is read, however, we do something quite different. If the format
	  rate matches the internal sample rate, all is fine. However, if the rates
	  don't match, the audiohook attempts to "fix up" the number of samples that
	  were requested. This can result in some seriously large number of samples
	  being requested from the read/write factories.

	  Consider the worst case - 192kHz SLIN. If we attempt to read 20ms worth of
	  audio produced at that rate, we'd request 3840 samples (192000 / (1000 / 20)).
	  However, if the audiohook is still expecting an internal sample rate of 8000,
	  we'll attempt to "fix up" the requested samples to:

	    samples_converted = samples * (ast_format_get_sample_rate(format) /
	                                   (float) audiohook->hook_internal_samp_rate);

	    which is:

	    92160 = 3840 * (192000 / 8000)

	  This results in us attempting to read 92160 samples from our factories, as
	  opposed to the 3840 that we actually wanted. On a 64-bit machine, this
	  miraculously survives - despite allocating up to two buffers of length 92160
	  on the stack. The 32-bit machines aren't quite so lucky. Even in the case where
	  this works, we will either (a) get way more samples than we wanted; or (b) get
	  about 3840 samples, assuming the timing is pretty good on the machine.

	  Either way, the calculation being performed is wrong, based on the API users
	  expectations.

	  My first inclination was to allocate the buffers on the heap. As it is,
	  however, there's at least two drawbacks with doing this:
	  (1) It's a bit complicated, as the size of the buffers may change during the
	      lifetime of the audiohook (ew).
	  (2) The stack is faster (yay); the heap is slower (boo).

	  Since our calculation is flat out wrong in the first place, this patch fixes
	  this issue by instead updating the internal sample rate based on the format
	  passed into the read operation. This causes us to read the correct number of
	  samples, and has the added benefit of setting the audihook with the right
	  SLIN format.

	  Note that this issue was caught by the Asterisk Test Suite as a result of
	  r432195 in the 13 branch. Because this issue is also theoretically possible
	  in Asterisk 11, the change is being made here as well.

	  Review: https://reviewboard.asterisk.org/r/4475/
	  ........

	  Merged revisions 432810 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432811 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432812 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-12 07:40 +0000 [29304d10a0]  Diederik de Groot (License 6600)

	* Add support for the clang compiler; update RAII_VAR to use BlocksRuntime

	  RAII_VAR, which is used extensively in Asterisk to manage reference counted
	  resources, uses a GCC extension to automatically invoke a cleanup function
	  when a variable loses scope. While this functionality is incredibly useful
	  and has prevented a large number of memory leaks, it also prevents Asterisk
	  from being compiled with clang.

	  This patch updates the RAII_VAR macro such that it can be compiled with clang.
	  It makes use of the BlocksRuntime, which allows for a closure to be created
	  that performs the actual cleanup.

	  Note that this does not attempt to address the numerous warnings that the clang
	  compiler catches in Asterisk.

	  Much thanks for this patch goes to:
	  * The folks on StackOverflow who asked this question and Leushenko for
	    providing the answer that formed the basis of this code:
	    http://stackoverflow.com/questions/24959440/rewrite-gcc-cleanup-macro-with-nested-function-for-clang
	  * Diederik de Groot, who has been extremely patient in working on getting this
	    patch into Asterisk.

	  Review: https://reviewboard.asterisk.org/r/4370/

	  ASTERISK-24133
	  ASTERISK-23666
	  ASTERISK-20399
	  ASTERISK-20850 #close
	  Reported by: Diederik de Groot
	  patches:
	    RAII_CLANG.patch uploaded by Diederik de Groot (License 6600)
	  ........

	  Merged revisions 432807 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432808 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432809 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-11 11:39 +0000 [4115e327ac]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Move internal init/destroy prototypes to private header file.

	  Done as a separate commit from a finding in
	  https://reviewboard.asterisk.org/r/4467/
	  ........

	  Merged revisions 432787 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432788 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-11 10:26 +0000 [89b65f5dda]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix pjsip.conf type=global object default value handling.

	  When a type=global section is not defined in pjsip.conf the global
	  defaults are not applied.  As a result the mandatory Max-Forwards header
	  is not added to SIP messages for res_pjsip/chan_pjsip.

	  The handling of pjsip.conf type=global objects has several problems:

	  1) If the global object is missing the defaults are not applied.

	  2) If the global object is missing the default_outbound_endpoint's default
	  value is not returned by ast_sip_global_default_outbound_endpoint().

	  3) Defines are needed so default values only need to be changed in one
	  place.

	  * Added a sorcery instance observer callback to check if there were any
	  type=global sections loaded.  If there were more than one then issue an
	  error message.  If there were none then apply the global defaults.

	  * Fixed ast_sip_global_default_outbound_endpoint() to return the
	  documented default when no type=global object is defined.

	  * Made defines for the global default values.

	  * Increased the default_useragent[] size because SVN version strings can
	  get lengthy and 128 characters may not be enough.

	  * Fixed an off-nominal code path ref leak in global_alloc() if the string
	  fields fail to initialize.

	  * Eliminated RAII_VAR in get_global_cfg() and
	  ast_sip_global_default_outbound_endpoint().

	  ASTERISK-24807 #close
	  Reported by: Anatoli

	  Review: https://reviewboard.asterisk.org/r/4467/
	  ........

	  Merged revisions 432766 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432767 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-11 10:22 +0000 [185d2e082a]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fixed invalid empty Server and User-Agent SIP headers.

	  Setting pjsip.conf useragent to an empty string results in an empty SIP
	  header being sent.

	  * Made not add an empty SIP header item to the global SIP headers list.

	  Review: https://reviewboard.asterisk.org/r/4467/
	  ........

	  Merged revisions 432764 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432765 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-10 18:09 +0000 [2889f074a0]  Joshua Colp <jcolp@digium.com>

	* core: Don't create snapshots with locks.

	  Snapshots are immutable and are never changed. Allocating them
	  with a lock is wasteful.

	  Review: https://reviewboard.asterisk.org/r/4469/
	  ........

	  Merged revisions 432742 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432743 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-10 16:33 +0000 [15d266bf85]  Javier Acosta (License 6690)

	* res/res_config_odbc: Fix improper escaping of backslashes with MySQL

	  When escaping backslashes with MySQL, the proper way to escape the characters
	  in a LIKE clause is to escape the '\' four times, i.e., '\\\\'. To quote the
	  MySQL manual:

	  "Because MySQL uses C escape syntax in strings (for example, “\n” to represent
	  a newline character), you must double any “\” that you use in LIKE strings.
	  For example, to search for “\n”, specify it as “\\n”. To search for “\”,
	  specify it as “\\\\”; this is because the backslashes are stripped once by the
	  parser and again when the pattern match is made, leaving a single backslash to
	  be matched against."

	  ASTERISK-24808 #close
	  Reported by: Javier Acosta
	  patches:
	    res_config_odbc.diff uploaded by Javier Acosta (License 6690)
	  ........

	  Merged revisions 432720 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432721 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432722 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-10 13:13 +0000 [ab6e2c93f3]  Graham Barnett (License 6685)

	* app_voicemail: Fix crash with IMAP backends when greetings aren't present

	  When an IMAP backend is in use and greetings are set to be used, but aren't
	  present for a user in their IMAP folder, Asterisk will crash. This occurs
	  due to the mailstream being set to the 'greetings' folder and being left
	  in that particular state, regardless of the success/failure of the attempt
	  to access the folder the mailstream points to. Later access of the mailstream
	  assumes that it points to the 'INBOX' (or some other folder), resulting in
	  either a crash (if the greetings folder didn't exist and the mailstream is
	  invalid) or an inability to read messages from the 'INBOX' folder.

	  This patch restores the mailstream to its correct state after accessing the
	  greetings. This fixes the crash, and sets the mailstream to the state that
	  VoiceMailMain expects.

	  Note that while ASTERISK-23390 also contained a patch for this issue, the
	  patch on ASTERISK-24786 is the one being merged here.

	  Review: https://reviewboard.asterisk.org/r/4459/

	  ASTERISK-23390 #close
	  Reported by: Ben Smithurst

	  ASTERISK-24786 #close
	  Reported by: Graham Barnett
	  Tested by: Graham Barnett
	  patches:
	    app_voicemail.c.patch.SIGSEGV3rev2 uploaded by Graham Barnett (License 6685)
	  ........

	  Merged revisions 432695 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432696 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432697 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-10 13:05 +0000 [79e9b37ad0]  Ed Hynan (Licnese 6680)

	* localtime: Fix file descriptor leak on kqueue(2) systems

	  The localtime management in the Asterisk core contains a thread that watches
	  for changes in the local timezone. On systems where the directory containing
	  /etc/localtime is modified frequently, the thread monitoring the changes will
	  be woken up to determine if any changes in timezone have occurred. When using
	  kqueue(2), this can cause a leak of file descriptors due to some improper
	  management of resources.

	  This patch updates the kqueue(2) handling in localtime, such that is no longer
	  leaks resources.

	  Review: https://reviewboard.asterisk.org/r/4450/

	  ASTERISK-24739 #close
	  Reported by: Ed Hynan
	  patches:
	    11.15.0-u.diff uploaded by Ed Hynan (Licnese 6680)
	    11.7.0-u.diff uploaded by Ed Hynan (License 6680)
	    svn-trunk-Jan-26-2015-u.diff uploaded by Ed Hynan (License 6680)
	  ........

	  Merged revisions 432691 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432693 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432694 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-10 11:08 +0000 [e7ee83ea90]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_refer: Fix occasional unexpected BYE sent after receiving a REFER.

	  A race condition happened between initiating a transfer and requesting
	  that a dialog termination be delayed.  Occasionally, the transferrer
	  channels would exit the bridge and hangup before the dialog termination
	  delay was requested.

	  * Made request dialog termination delay before initiating the transfer
	  action.  If the transfer fails then cancel the delayed dialog termination
	  request.

	  ASTERISK-24755 #close
	  Reported by: John Bigelow

	  Review: https://reviewboard.asterisk.org/r/4460/
	  ........

	  Merged revisions 432668 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432669 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-09 11:13 +0000 [1ce529d30e]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: allow configuration of endpoint identifier query order

	  It's possible to have a scenario that will create a conflict between endpoint
	  identifiers. For instance an incoming call could be identified by two different
	  endpoint identifiers and the one chosen depended upon which identifier module
	  loaded first. This of course causes problems when, for example, the incoming
	  call is expected to be identified by username, but instead is identified by ip.
	  This patch adds a new 'global' option to res_pjsip called
	  'endpoint_identifier_order'. It is a comma separated list of endpoint
	  identifier names that specifies the order by which identifiers are processed
	  and checked.

	  ASTERISK-24840 #close
	  Reported by: Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/4455/
	  ........

	  Merged revisions 432638 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432639 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-07 19:47 +0000 [a5f80f1781]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Fix wrongful use of USE_PJPROJECT define.

	  As pjproject is now used as a shared library a different define,
	  HAVE_PJPROJECT, is used to specify if pjproject is present.

	  ASTERISK-24830 #close
	  Reported by: Stefan Engström
	  ........

	  Merged revisions 432614 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432615 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-06 16:59 +0000 [affcf1d766]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_refer: Make safely get the context for a blind transfer.

	  Made safely get the TRANSFER_CONTEXT channel value while the channel is
	  locked in refer_incoming_attended_request() and
	  refer_incoming_blind_request().  The pointer returned by
	  pbx_builtin_getvar_helper() is only valid while the channel is locked.
	  ........

	  Merged revisions 432594 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432595 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-06 16:18 +0000 [090ab1735b]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_refer: Made refer_attended_alloc() not create the ao2 object with a lock.

	  The lock is unused.
	  ........

	  Merged revisions 432574 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432579 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-06 15:38 +0000 [b85cb7ea1b]  Jonathan Rose <jrose@digium.com>

	* app: Add functions to swap voicemail function table for testing purposes
	  ........

	  Merged revisions 432556 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432573 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-06 14:24 +0000 [c7cc1b3059]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi/sig_analog: Fix distinctive ring detection to suck less.

	  The distinctive ring feature interferes with detecting Caller ID and
	  appears to have been broken for years.  What happens is if you have a
	  ring-ring cadence as used in the UK you get too many DAHDI events for the
	  distinctive ring pattern array and Caller ID detection is aborted.  I
	  think when Zapata/DAHDI added the ring begin event it broke distinctive
	  ring.  More events happen than before and the code does no filtering of
	  which event times are recorded in the pattern array.

	  * Made distinctive ring only record the ringt count when the ring ends
	  instead of on just any DAHDI event.  Distinctive ring can be ring,
	  ring-ring, ring-ring-ring, or different ring durations for the up to three
	  rings.

	  * Fixed the distinctive ring detection enable (chan_dahdi.conf option
	  usedistinctiveringdetection) to be per port instead of somewhat per port
	  and somewhat global.  This has been broken since v1.8.

	  * Fixed using the default distinctive ring context when the detected
	  pattern does not match any configured dringX patterns.  The default
	  context did not get set when the previous call was a matched distinctive
	  ring pattern and the current call is not matched.  This has been broken
	  since v1.8.

	  * Made distinctive ring have no effect on Caller ID detection when it is
	  disabled.  Caller ID detection just monitors for 10 seconds before giving
	  up.

	  * Fixed leak of struct callerid_state memory when a polarity reversal
	  during Caller ID detection causes the incoming call to be aborted.

	  DAHDI-1143
	  AST-1545
	  ASTERISK-24825 #close
	  Reported by: Richard Mudgett

	  ASTERISK-17588
	  Reported by: Daniel Flounders

	  Review: https://reviewboard.asterisk.org/r/4444/
	  ........

	  Merged revisions 432530 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432534 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432551 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-06 13:34 +0000 [f1ab2c5e8b]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip: Fix realtime locking inversion when poking a just built peer.

	  When a realtime peer is built it can cause a locking inversion when the
	  just built peer is poked.  If the CLI command "sip show channels" is
	  periodically executed then a deadlock can happen because of the locking
	  inversion.

	  * Push the peer poke off onto the scheduler thread to avoid the locking
	  inversion of the just built realtime peer.

	  AST-1540
	  ASTERISK-24838 #close
	  Reported by: Richard Mudgett

	  Review: https://reviewboard.asterisk.org/r/4454/
	  ........

	  Merged revisions 432526 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432528 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432529 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-05 10:40 +0000 [5c3e33b3ca]  gtjoseph <george.joseph@fairview5.com>

	* app_voicemail: Fix compile breaking in app_voicemail with IMAP_STORAGE.

	  There is a leftover "assert" in app_voicemail/__messagecount that references 
	  variables that don't exist.  This causes the compile to fail when 
	  --enable-dev-mode and IMAP_STORAGE are selected.

	  This patch removes the assert.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4461/
	  ........

	  Merged revisions 432484 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432485 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432486 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-04 12:55 +0000 [41ba8fd7c0]  Matt Jordan <mjordan@digium.com>

	* translate: Prevent invalid memory accesses on fast shutdown

	  When a 'core restart now' or 'core stop now' is executed and a channel is
	  currently in a media operation, the translator matrix can be destroyed while a
	  channel is currently blocked on getting the best translation choice
	  (see ast_translator_best_choice). When the channel gets the mutex, the
	  translation matrix now has invalid memory, and Asterisk crashes.

	  This patch does two things:
	  (1) We now only clean up the translation matrix on a graceful shutdown. In that
	      case, there are no channels, and so there is no risk of this occurring.
	  (2) We also now set the __matrix and __indextable to NULL. In some initial
	      backtraces when this occurred, it looked as if there was a memory corruption
	      occurring, and it wasn't until we determined that something had restarted
	      Asterisk that the issue became clear. By setting these to NULL on shutdown,
	      it becomes a bit easier to determine why a crash is occurring.

	  Note that we could litter the code with NULL checks on the __matrix, but the
	  act of making the translation matrix cleaned up on shutdown should preclude
	  this issue from occurring in the first place, and this part of the code needs
	  to be as fast as possible.

	  Review: https://reviewboard.asterisk.org/r/4457/
	  ........

	  Merged revisions 432453 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432455 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-03-02 13:15 +0000 [278ea2f468]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_sdp_rtp: Revert portion of r432195

	  Unfortunately, while initial testing with ConfBridge did not reproduce the
	  audio problem alluded to in the comment in res_pjsip_sdp_rtp, further testing
	  did show that bridge_softmix and/or ConfBridge has a severe problem bridging
	  two or more participants at different sampling rates. Sometimes, it even picks
	  odd sampling rates that cause hideous audio problems.

	  This patch backs out the offending portion of the code until the issues in
	  the affected bridging modules can be more properly analyzed.

	  ASTERISK-24841
	  ........

	  Merged revisions 432423 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432425 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-27 12:31 +0000 [9e841e4fb6]  Richard Mudgett <rmudgett@digium.com>

	* ARI: Fix crash if integer values used in JSON payload 'variables' object.

	  Sending the following ARI commands caused Asterisk to crash if the JSON
	  body 'variables' object passes values of types other than strings.

	  POST /ari/channels
	  POST /ari/channels/{channelid}
	  PUT /ari/endpoints/sendMessage
	  PUT /ari/endpoints/{tech}/{resource}/sendMessage

	  * Eliminated RAII_VAR usage in ast_ari_channels_originate_with_id(),
	  ast_ari_channels_originate(), ast_ari_endpoints_send_message(), and
	  ast_ari_endpoints_send_message_to_endpoint().

	  ASTERISK-24751 #close
	  Reported by:  jeffrey putnam

	  Review: https://reviewboard.asterisk.org/r/4447/
	  ........

	  Merged revisions 432404 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432405 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-26 12:53 +0000 [d79670b269]  Scott Griepentrog <sgriepentrog@digium.com>

	* Dial API: add self destruct option when complete

	  This patch adds a self-destruction option to the
	  dial api.  The usefulness of this is mostly when
	  using async mode to spawn a separate thread used
	  to handle the new call, while the calling thread
	  is allowed to go on about other business.

	  The only alternative to this option would be the
	  calling thread spawning a new thread, or hanging
	  around itself waiting to destroy the dial struct
	  after completion.

	  Example of use (minus error checking):

	    struct ast_dial *dial = ast_dial_create();

	    ast_dial_append(dial, "PJSIP", "200", NULL);

	    ast_dial_option_global_enable(dial, AST_DIAL_OPTION_ANSWER_EXEC, "Echo");
	    ast_dial_option_global_enable(dial, AST_DIAL_OPTION_SELF_DESTROY, NULL);

	    ast_dial_run(dial, NULL, 1);

	  The dial_run call will return almost immediately
	  after spawning the new thread to run and monitor
	  the dial.  If the call is answered, it is placed
	  into the echo app.  When completed, it will call
	  ast_dial_destroy() on the dial structure.

	  Note that any allocations made to pass values to
	  ast_dial_set_user_data() or dial options must be
	  free'd in a state callback function on any of:
	    AST_DIAL_RESULT_UNASWERED,
	    AST_DIAL_RESULT_ANSWERED,
	    AST_DIAL_RESULT_HANGUP, or 
	    AST_DIAL_RESULT_TIMEOUT.

	  Review: https://reviewboard.asterisk.org/r/4443/
	  ........

	  Merged revisions 432385 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432386 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-26 11:12 +0000 [d04fbb0f9d]  Kevin Harwell <kharwell@digium.com>

	* app_chanspy, channel: fix frame leaks

	  Fixed a couple of frame leaks that were found during testing.

	  ASTERISK-24828 #close
	  Reported by: John Hardin
	  Review: https://reviewboard.asterisk.org/r/4445/
	  ........

	  Merged revisions 432362 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432363 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432364 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-25 22:58 +0000 [8a16c2f0c2]  Matt Jordan <mjordan@digium.com>

	* make: Remove 'res_features' from libraries to link against with cygwin/mingw32

	  Both the apps and channels Makefiles still listed 'res_features' as modules to
	  link against when compiling for cygwin or mingw32. This module hasn't existed
	  for quite some time.

	  ASTERISK-18105 #close
	  Reported by: feyfre
	  ........

	  Merged revisions 432341 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432342 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432343 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-25 21:03 +0000 [3725173b9e]  Makoto Dei (License 5027)

	* channels/chan_sip: Don't send a BYE after final response when PBX thread fails

	  When Asterisk fails to start a PBX thread for a new channel - for example, when
	  the maxcalls setting in asterisk.conf is exceeded - we currently send a final
	  response, and then attempt to send a BYE request to the UA. Since that's all
	  sorts of wrong, this patch fixes that by setting sipalreadygone on the sip_pvt
	  such that we don't get stuck sending BYE requests to something that does not
	  want it.

	  Note that this patch is a slight modification of the one on ASTERISK-15434.
	  For clarity, it explicitly calls sipalreadygone with the calls to transmit a
	  final response.

	  ASTERISK-21845
	  ASTERISK-15434 #close
	  Reported by: Makoto Dei
	  Tested by: Matt Jordan
	  patches:
	    sip-pbxstart-failed.patch uploaded by Makoto Dei (License 5027)
	  ........

	  Merged revisions 432320 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432321 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432322 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-25 17:49 +0000 [e484140aed]  Rusty Newton <rnewton@digium.com>

	* configs/basic-pbx - Super Awesome Company example configs Phase 1, Patch 1

	  Example configuration files for a "basic PBX" deployment for the fictitious
	  Super Awesome Company. Details at https://reviewboard.asterisk.org/r/4379/
	  and https://wiki.asterisk.org/wiki/display/AST/Super+Awesome+Company

	  Reported by: Malcolm Davenport
	  Tested by: Rusty Newton

	  Review: https://reviewboard.asterisk.org/r/4379/
	  ........

	  Merged revisions 432301 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432302 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-25 17:09 +0000 [ced84d7e62]  Matt Jordan <mjordan@digium.com>

	* configure: Promote SQLite3 "not installed" warning to error

	  Since Asterisk won't build without the library, not having it is definitely
	  an error. Thanks to Kyle Kurz for pointing this out.
	  ........

	  Merged revisions 432280 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432281 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432282 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-25 17:05 +0000 [4b63da7f7d]  Matt Jordan <mjordan@digium.com>

	* channels/chan_sip: Clarify WARNING message in mismatched SRTP scenario

	  When we receive an SDP as part of an offer/answer for a peer/friend has been
	  configured to require encryption, and that SDP offer/answer failed to provide
	  acceptable crypto attributes, we currently issue a WARNING that uses the phrase
	  "we" and "requested". In this case, both of those terms are ambiguous - the
	  user will probably think "we" is Asterisk (it most likely isn't) and it may
	  not be a "request", so much as an SDP that was received in some fashion.

	  This patch makes the WARNING messages slightly less bad and a bit more
	  accurate as well.

	  ASTERISK-23214 #close
	  Reported by: Rusty Newton
	  ........

	  Merged revisions 432277 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432278 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432279 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-25 15:42 +0000 [d68012d1a3]  Olle Johansson <oej@edvina.net> (License 5267)

	* channels/sip/sdp_crypto: Handle SRTP keys negotiated with key lifetime/MKI

	  Prior to this patch, SDP offers negotiating SDES-SRTP crypto attributes would
	  be rejected if those crypto attributes contained either a key lifetime or a
	  MKI parameter. While from a theoretical point of view this was defensible -
	  Asterisk does not support key lifetimes or multiple crypto keys - from a
	  practical point of view, this is quite a problem. A large number of endpoints
	  offer lifetimes/MKI, which Asterisk can tolerate so long as it doesn't actually
	  have to support anything more than a single key or refresh the key.
	  In reality, this is (so far as we've seen) always the case.

	  This patch is a forward port of Olle's work in the lingon-srtp-key-lifetime-1.8
	  branch. To quote Olle from ASTERISK-17721, it handles lifetime/MKI parameters
	  in the following fashion:

	  > The Lingon branch now handle lifetime and MKI parameters.
	  >
	  > We only accept lifetimes up to max for the crypto and higher than 10 hours
	  > for packetization of 20 ms (50 pps).
	  >
	  > We only handle MKI with index 1.
	  >
	  > We do not really bother with counting packets and reinviting at end of
	  > lifetime, so the min of 10 hours kind of takes care of most calls. If there
	  > are longer ones, we rely on the other side for re-invites.
	  >
	  > It's still not perfect, but I personally think this is an improvement. A
	  > configuration option for minimum lifetime accepted could be added.

	  When the patch was ported forward, I decided against adding a configuration
	  option as Olle's handling was more than sufficient for every case I've seen
	  come through the issue tracker or through interoperability testing. We can
	  revisit that decision if it proves to be false.

	  A few small other tweaks were made to the surrounding code to reduce
	  indentation and provide better type safety for the 'tag' parameter.

	  Review: https://reviewboard.asterisk.org/r/4419/
	  Review: https://reviewboard.asterisk.org/r/4418/

	  ASTERISK-17721 #close
	  Reported by: Terry Wilson

	  ASTERISK-17899 #close
	  Reported by: Dwayne Hubbard
	  patches:
	    lingon-srtp-key-lifetime-1.8.diff uploaded by oej (License 5267)

	  ASTERISK-20233
	  Reported by: tootai

	  ASTERISK-22748
	  Reported by: Alejandro Mejia
	  ........

	  Merged revisions 432239 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432258 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432259 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-25 14:47 +0000 [ff642289f4]  David M. Lee <dlee@digium.com>

	* Increase WebSocket frame size and improve large read handling

	  Some WebSocket applications, like [chan_respoke][], require a larger
	  frame size than the default 8k; this patch bumps the default to 16k.
	  This patch also fixes some problems exacerbated by large frames.

	  The sanity counter was decremented on every fread attempt in
	  ws_safe_read(), regardless of whether data was read from the socket or
	  not. For large frames, this could result in loss of sanity prior to
	  reading the entire frame. (16k frame / 1448 bytes per segment = 12
	  segments).

	  This patch changes the sanity counter so that it only decrements when
	  fread() doesn't read any bytes. This more closely matches the original
	  intention of ws_safe_read(), given that the error message is
	  "Websocket seems unresponsive".

	  This patch also properly logs EOF conditions, so disconnects are no
	  longer confused with unresponsive connections.

	   [chan_respoke]: https://github.com/respoke/chan_respoke

	  Review: https://reviewboard.asterisk.org/r/4431/
	  ........

	  Merged revisions 432236 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432237 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432238 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-24 17:00 +0000 [57525c3cf2]  Richard Mudgett <rmudgett@digium.com>

	* config.h: Use real parameter names for ast_variable_new() define.

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432220 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-24 16:14 +0000 [8574c4d197]  Matt Jordan <mjordan@digium.com>

	* channels/chan_sip: Fix crash when transmitting packet after thread shutdown

	  When the monitor thread is stopped, its pthread ID is set to a specific value
	  (AST_PTHREADT_STOP) so that later portions of the code can determine whether
	  or not it is safe to manipulate the thread. Unfortunately, __sip_reliable_xmit
	  failed to check for that value, checking instead only for AST_PTHREAD_STOP.
	  Passing the invalid yet very specific value to pthread_kill causes a crash.

	  This patch adds a check for AST_PTHREADT_STOP in __sip_reliable_xmit such that
	  it doesn't attempt to poke the thread if the thread has already been stopped.

	  ASTERISK-24800 #close
	  Reported by: JoshE
	  ........

	  Merged revisions 432198 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432199 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432200 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-24 16:00 +0000 [a528dfc9a7]  Matt Jordan <mjordan@digium.com>

	* ARI/PJSIP: Apply requesting channel's format cap to created channels

	  This patch addresses the following problems:
	  * ari/resource_channels: In ARI, we currently create a format capability
	    structure of SLIN and apply it to the new channel being created. This was
	    originally done when the PBX core was used to create the channel, as there
	    was a condition where a newly created channel could be created without any
	    formats. Unfortunately, now that the Dial API is being used, this has two
	    drawbacks:
	    (a) SLIN, while it will ensure audio will flows, can cause a lot of
	        needless transcodings to occur, particularly when a Local channel is
	        created to the dialplan. When no format capabilities are available, the
	        Dial API handles this better by handing all audio formats to the requsted
	        channels. As such, we defer to that API to provide the format
	        capabilities.
	    (b) If a channel (requester) is causing this channel to be created, we
	        currently don't use its format capabilities as we are passing in our own.
	        However, the Dial API will use the requester channel's formats if none
	        are passed into it, and the requester channel exists and has format
	        capabilities. This is the "best" scenario, as it is the most likely to
	        create a media path that minimizes transcoding.
	    Fixing this simply entails removing the providing of the format capabilities
	    structure to the Dial API.

	  * chan_pjsip: Rather than blindly picking the first format in the format
	    capability structure - which actually *can* be a video or text format - we
	    select an audio format, and only pick the first format if that fails. That
	    minimizes the weird scenario where we attempt to transcode between video/audio.

	  * res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure.
	    Since ast_request already limits us down to one format capability once the
	    format capabilities are passed along, there's no reason to squelch it here.

	  * channel: Fixed a comment. The reason we have to minimize our requested
	    format capabilities down to a single format is due to Asterisk's inability
	    to convey the format to be used back "up" a channel chain. Consider the
	    following:

	      PJSIP/A => L;1 <=> L;2 => PJSIP/B
	      g,u,a     g,u,a    g,u,a      u

	    That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials
	    PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local
	    channel has inherited those format capabilities down the line; PJSIP/B
	    supports only ulaw. According to these format capabilities, ulaw is
	    acceptable and should be selected across all the channels, and no
	    transcoding should occur. However, there is no way to convey this: when L;2
	    and PJSIP/B are put into a bridge, we will select ulaw, but that is not
	    conveyed to PJSIP/A and L;1. Thus, we end up with:

	      PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
	        g          g   X   u        u

	    Which causes g722 to be written to PJSIP/B.

	    Even if we can convey the 'ulaw' choice back up the chain (which through
	    some severe hacking in Local channels was accomplished), such that the chain
	    looks like:

	      PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B
	        u          u       u         u

	    We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back
	    with only 'ulaw'. This results in all the channel structures being set up
	    correctly, but PJSIP/A *still* sending g722 and causing the chain to fall
	    apart.

	    There's a lot of difficulty just in setting this up, as there are numerous
	    race conditions in the act of bridging, and no clean mechanism to pass the
	    selected format backwards down an established channel chain. As such, the
	    best that can be done at this point in time is clarifying the comment.

	  Review: https://reviewboard.asterisk.org/r/4434/

	  ASTERISK-24812 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 432195 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432196 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-24 12:38 +0000 [91733b5d15]  Kevin Harwell <kharwell@digium.com>

	* bridge_softmix: G.729 codec license held

	  When more than one call using the same codec type enters into a softmix bridge
	  and no audio is present for a channel the bridge optimizes the out frame by
	  using the same one for all channels with the same codec type. Unfortunately,
	  when that number (channels with same codec type) dropped to <= 1 the codec
	  was not dereferenced. At least not until all parties left the bridge. Thus in
	  the case of G.729 the license was not released. This patch ensures that the
	  codec is dereferenced immediately when the optimization no longer applies.

	  ASTERISK-24797 #close
	  Reported by: Luke Hulsey
	  Review: https://reviewboard.asterisk.org/r/4429/
	  ........

	  Merged revisions 432174 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432175 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432176 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-21 14:48 +0000 [bedf51b2ce]  Joshua Colp <jcolp@digium.com>

	* res_ari_channels: Return a 404 response when a requested channel variable does not exist.

	  This change makes it so that if a channel variable is requested and it does not exist
	  a 404 response will be returned instead of an allocation failed response. This makes
	  it easier to debug and figure out what is going on for a user.

	  ASTERISK-24677 #close
	  Reported by: Joshua Colp
	  ........

	  Merged revisions 432154 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432155 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-21 13:28 +0000 [87b7060f36]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_registrar: Add Expires header to 200 OK if present in REGISTER.

	  Some implementations don't pay attention to the expires for individual contacts.
	  In this case they may consider the lack of an Expires header in the 200 OK as
	  unregistered. This change makes it so if an Expires header is present in the REGISTER
	  we will add one in the 200 OK.

	  ASTERISK-24785 #close
	  Reported by: Ross Beer
	  ........

	  Merged revisions 432136 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432137 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-21 12:53 +0000 [283bb15c16]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add a log message when creating a UAC dialog to a target URI that is invalid.

	  ASTERISK-24499 #close
	  Reported by: Rusty Newton
	  ........

	  Merged revisions 432118 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432119 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-21 11:36 +0000 [b3c1ad5d73]  Graham Barnett (License 6685)

	* apps/app_voicemail: Demote an ERROR message to a WARNING message

	  When using IMAP voicemail with FreePBX, you will often get ERROR messages
	  complaining about not being able to find a mailbox. This is due to how FreePBX
	  handles voicemail mailboxes. Unfortunately, app_voicemail has to consider this
	  a configuration error, as in any other system it would be indicative of
	  someone misconfiguring their system.

	  Regardless, a misconfiguration is a WARNING, and not an ERROR. This patch
	  demotes the message so that system administrators can hopefully reduce some
	  of the noise in their log files.

	  Note that in the original patch this was made into a NOTICE, but that's a
	  too forgiving.

	  ASTERISK-24790 #close
	  Reported by: Graham Barnett
	  patches:
	    app_voicemail.c.patch_noise uploaded by Graham Barnett (License 6685)
	  ........

	  Merged revisions 432098 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432099 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432100 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-21 08:06 +0000 [2ea7ccbf70]  Joshua Colp <jcolp@digium.com>

	* http: Add missing html tag to 'httpstatus' functionality.

	  ASTERISK-24724 #close
	  Reported by: Ashley Sanders
	  ........

	  Merged revisions 432078 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432079 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432080 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-20 20:58 +0000 [e66b874f5d]  Corey Farrell <git@cfware.com>

	* Allow shutdown to unload modules that register bucket scheme's or codec's.

	  * Change __ast_module_shutdown_ref to be NULL safe (11+).
	  * Allow modules that call ast_bucket_scheme_register or ast_codec_register
	    to be unloaded during graceful shutdown only (13+ only).

	  ASTERISK-24796 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4428/
	  ........

	  Merged revisions 432058 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432059 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432060 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-20 20:51 +0000 [bb71672a47]  Corey Farrell <git@cfware.com>

	* main/asterisk.c: Reverse #if statement in listener() to fix code folding.

	  listener() opens the same code block in two places (#if and #else).  This
	  confuses some folding editors causing it to think that an extra code block
	  was opened.  Folding in 'geany' causes all code after listener() to be
	  folded as if it were part of that procedure.

	  ASTERISK-24813 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4435/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432057 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-20 20:47 +0000 [ce50fa314a]  Corey Farrell <git@cfware.com>

	* asterisk/lock.h: Fix syntax errors for non-gcc OSX with 64-bit integers.

	  Add a couple of missing closing brackets / parenthesis.

	  ASTERISK-24814 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4436/
	  ........

	  Merged revisions 432054 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432055 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432056 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-20 11:55 +0000 [bb06603d5f]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi/sig_analog: Put log message strings on one line.

	  With the log messages on one line, you can search for the log message seen
	  in the log and expect to find it.
	  ........

	  Merged revisions 432032 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432034 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432036 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-20 11:53 +0000 [340818ad12]  Matt Hoskins (license 6688)

	* ASTERISK-24811: Add ast_sorcery_apply_config() to res_pjsip_publish_asterisk.

	  Matt Hoskins reported that res_pjsip_publish_asterisk wouldn't pull config from 
	  realtime.  Turns out it was just missing a call ast_sorcery_apply_config().

	  res_pjsip_acl was missing it as well, so I added it.  The other pjsip modules 
	  looked OK.

	  ASTERISK-24811 #close
	  Reported-by: Matt Hoskins
	  Tested-by: George Joseph
	  Tested-by: Matt Hoskins
	  patches:
	  	res_pjsip_publish_asterisk.c.patch submitted by Matt Hoskins (license 6688)

	  Review: https://reviewboard.asterisk.org/r/4433/
	  ........

	  Merged revisions 432033 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432035 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-20 09:47 +0000 [4dab71831f]  Graham Barnett (License 6685)

	* apps/app_voicemail: Fix IMAP header compatibility issue with Microsoft Exchange

	  When interfacing with Microsoft Exchange, custom headers will be returned as
	  all lower case. Currently, the IMAP header code will fail to parse the returned
	  custom headers, as it will be performing a case sensitive comparison. This can
	  cause playback of messages to fail, as needed information - such as origtime -
	  will not be present.

	  This patch updates app_voicemail's header parsing code to perform a case
	  insensitive lookup for the requested custom headers. Since the headers are
	  specific to Asterisk, e.g., 'x-asterisk-vm-orig-time', and headers should be
	  unique in an IMAP message, this should cause no issues with other systems.

	  ASTERISK-24787 #close
	  Reported by: Graham Barnett
	  patches:
	    app_voicemail.c.patch_MSExchange uploaded by Graham Barnett (License 6685)
	  ........

	  Merged revisions 432012 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 432013 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432014 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-19 15:26 +0000 [05cc6d6d55]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi: Remove some dead code.
	  ........

	  Merged revisions 431992 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431993 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431994 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-19 12:26 +0000 [252aee4228]  Richard Mudgett <rmudgett@digium.com>

	* ISDN AOC: Fix crash from an AOC-E message that doesn't have a channel association.

	  Processing an AOC-E event that does not or no longer has a channel
	  association causes a crash.

	  The problem with posting AOC events to the channel topic is that AOC-E
	  events don't always have a channel association and posting the event to
	  the all channels topic is just wrong.  AOC-E events do however have their
	  own charging association method to refer to the agreement with the
	  charging entity.

	  * Changed the AOC events to post to the AMI manager topic instead of the
	  channel topics.  If a channel is associated with the event then channel
	  snapshot information is supplied with the AMI event.

	  * Eliminated RAII_VAR() usage in aoc_to_ami() and ast_aoc_manager_event().

	  This patch supercedes the patch on Review: https://reviewboard.asterisk.org/r/4427/

	  ASTERISK-22670 #close
	  Reported by: klaus3000

	  ASTERISK-24689 #close
	  Reported by: Marcel Manz

	  ASTERISK-24740 #close
	  Reported by: Panos Gkikakis

	  Review: https://reviewboard.asterisk.org/r/4430/
	  ........

	  Merged revisions 431974 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431975 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-19 11:37 +0000 [6992b2e8fa]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_refer: Handle INVITE with Replaces failure after answer.

	  * Fixed hangup handling of the session->channel after answer if the
	  ast_channel_move() or ast_bridge_impart() fails.  We are still the thread
	  controlling the session->channel so we need to call ast_hangup() to kill
	  the channel.

	  * Fixed debug messages in refer_incoming_invite_request() referencing
	  incorrect channnels on success.  Code comments now say why the
	  session->channel cannot be used.

	  Review: https://reviewboard.asterisk.org/r/4422/
	  ........

	  Merged revisions 431956 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431957 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-19 09:28 +0000 [e3fd826cdb]  Alexander Traud (License 6520)

	* tcptls: Handle new OpenSSL compile time option to disable SSLv3

	  Some distributions are going to disable SSLv3 at compile time. This option can
	  be checked using the directive OPENSSL_NO_SSL3_METHOD. This patch updates the
	  TCP/TLS handling in Asterisk to look for that directive before attempting to
	  use the SSLv3 specific methods.

	  ASTERISK-24799 #close
	  Reported by: Alexander Traud
	  patches:
	    no-ssl3-method.patch uploaded by Alexander Traud (License 6520)
	  ........

	  Merged revisions 431936 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431937 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431938 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-18 20:03 +0000 [a4774ceaa5]  Corey Farrell <git@cfware.com>

	* Create work around for scheduler leaks during shutdown.

	  * Added ast_sched_clean_by_callback for cleanup of scheduled events
	    that have not yet fired.
	  * Run all pending peercnt_remove_cb and replace_callno events in chan_iax2.
	    Cleanup of replace_callno events is only run 11, since it no longer
	    releases any references or allocations in 13+.

	  ASTERISK-24451 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4425/
	  ........

	  Merged revisions 431916 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431917 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431918 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-17 09:34 +0000 [09bfe4b208]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_refer: Fix crash from a REFER and BYE collision.

	  Analyzing a one-off crash on a busy system showed that processing a REFER
	  request had a NULL session channel pointer.  The only way I can think of
	  that could cause this is if an outgoing BYE transaction overlapped the
	  incoming REFER transaction in a collision.  Asterisk sends a BYE while the
	  phone sends a REFER to complete an attended transfer.

	  * Made check the session channel pointer before processing an incoming
	  REFER request in res_pjsip_refer.

	  * Fixed similar crash potential for res_pjsip supplement incoming request
	  processing for res_pjsip_sdp_rtp INFO, res_pjsip_caller_id INVITE/UPDATE,
	  res_pjsip_messaging MESSAGE, and res_pjsip_send_to_voicemail REFER
	  messages.

	  * Made res_pjsip_messaging respond to a message body too large with a 413
	  instead of ignoring it.

	  ASTERISK-24700 #close
	  Reported by: Zane Conkle

	  Review: https://reviewboard.asterisk.org/r/4417/
	  ........

	  Merged revisions 431898 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431899 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-16 15:29 +0000 [d808eace5c]  Matt Jordan <mjordan@digium.com>

	* res/res_rtp_asterisk: Fix crash in debug from RTCP reports without report block

	  When RTCP debugging was enabled, an RTCP report without a report block would
	  cause a crash. This was due to the verbose output not checking to see if the
	  report_block pointer was NULl before dereferencing it.

	  This patch adds the necessary check to prevent printing any verbose output
	  if the far side hasn't provided us the information they should have.

	  ASTERISK-24791 #close
	  Reported by: JoshE
	  Tested by: JoshE
	  ........

	  Merged revisions 431879 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431880 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-15 13:01 +0000 [55eb8fc068]  Joshua Colp <jcolp@digium.com>

	* pjsip: Remove "contact" type from pjsip.conf.sample

	  The "contact" object is not meant to be configured from the pjsip.conf
	  configuration file. It is meant to be created as a result of a registration
	  and stored elsewhere.

	  ASTERISK-24085 #close
	  Reported by: Rusty Newton
	  ........

	  Merged revisions 431860 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431861 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-15 12:00 +0000 [55709bc1f7]  Joshua Colp <jcolp@digium.com>

	* install_prereq: Tweak flags when configuring pjproject.

	  This change does two things:
	  1. Disables debugging so assertions which can return an error do,
	  instead of asserting.
	  2. Enables IPv6 support.

	  ASTERISK-24632 #close
	  Reported by: Rusty Newton
	  ........

	  Merged revisions 431843 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431844 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-15 11:43 +0000 [e78dd39885]  Joshua Colp <jcolp@digium.com>

	* res_sorcery_config: Improve object lookup times.

	  The res_sorcery_config module currently uses a fixed bucket
	  size of 53. This means that depending on the number of objects
	  you either end up with excess buckets or a lot of collisions.
	  Due to the way that res_sorcery_config is implemented it's actually
	  possible to make the bucket size dynamic based on the number of
	  objects. This is due to the fact that each loading of the config file
	  produces a new container and does not modify the existing one.
	  This change uses the number of expected objects and finds a prime
	  number near it. In practice depending on the number of objects this
	  can speed up lookups anywhere from 2X to 15X. This change also removes
	  the lock from the container as it is not needed.

	  Review: https://reviewboard.asterisk.org/r/4423/
	  ........

	  Merged revisions 431841 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431842 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-15 10:01 +0000 [e6fe69b76c]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add "pjsip show version" CLI command.

	  When debugging things it can be useful to know absolutely what
	  version of pjproject res_pjsip is running against. This change
	  adds a "pjsip show version" CLI command which can be used to
	  query for this.

	  ASTERISK-24685 #close
	  Reported by: Joshua Colp

	  Review: https://reviewboard.asterisk.org/r/4424/
	  ........

	  Merged revisions 431824 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431825 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-15 06:41 +0000 [17f9e0cacc]  Matthias Urlichs (license 5508)

	* res_timing_pthread: Fix leaky pipes.

	  During some refactoring the way private information for timers
	  was stored was changed. As a result of this the action which normally
	  removed the timer upon closure in res_timing_pthread was also removed
	  causing the timer to remain after it should using up resources.
	  This change ensures that the timer is removed upon closure.

	  ASTERISK-24768 #close
	  Reported by: Matthias Urlichs
	  patches:
	   timer.patch submitted by Matthias Urlichs (license 5508)
	  ........

	  Merged revisions 431807 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431808 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-14 18:33 +0000 [d1bd8b091b]  Matt Jordan <mjordan@digium.com>

	* apps/app_mixmonitor: Move Test Event for MIXMONITOR_END to after it finishes

	  The Test Event for MIXMONITOR_END - which signals that a MixMonitor has
	  completed - technically fired before the filestream was closed. If a test
	  used this to trigger a condition to verify that the file was written, it
	  could result in a race condition where the file size would not be what the
	  test expected.

	  Luckily, no tests were using this (although they should have been). Since the
	  test event needed to be moved after the point where the MixMonitor autochan has
	  been destroyed, the test event no longer emits the channel name. Luckily,
	  nothing needs it.
	  ........

	  Merged revisions 431788 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431789 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431790 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-14 13:46 +0000 [455a98a2f8]  Joshua Colp <jcolp@digium.com>

	* sorcery: Output an error message if a wizard is specified for an object type and it isn't found.

	  ASTERISK-24612 #close
	  Reported by: Joshua Colp
	  ........

	  Merged revisions 431771 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431772 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-14 12:31 +0000 [fae6bf8ace]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_exten_state: Improve log message when a subscription is attempted to a non-existent extension.

	  ASTERISK-24716 #close
	  Reported by: Rusty Newton
	  ........

	  Merged revisions 431754 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431755 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-14 12:21 +0000 [cc96e4a7ef]  Joshua Colp <jcolp@digium.com>

	* Multiple revisions 431751-431752

	  ........
	    r431751 | file | 2015-02-14 14:19:07 -0400 (Sat, 14 Feb 2015) | 5 lines
	    
	    chan_pjsip: Fix crash when CHANNEL dialplan function is invoked with pjsip argument and no type.
	    
	    ASTERISK-24771 #close
	    Reported by: Niklas Larsson
	  ........
	    r431752 | file | 2015-02-14 14:20:27 -0400 (Sat, 14 Feb 2015) | 2 lines
	    
	    'information' ends with an 'n'.
	  ........

	  Merged revisions 431751-431752 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431753 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-13 11:24 +0000 [f00ebf0a2d]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_session: Fix double re-INVITE collision crash.

	  A multi-asterisk box setup with direct media enabled would occasionally
	  crash when two re-INVITE collisions on a call leg happen in a row.

	  The re-INVITE logic only had one timer struct to defer the re-INVITE.
	  When the second collision happens the timer struct is overwritten and put
	  into the timer heap again.  Resources for the first timer are leaked and
	  the heap has two positions occupied by the same timer struct.  Now the
	  heap ordering is potentially corrupted, the timer will fire twice, and any
	  resources allocated for the second timer will be released twice.

	  * The solution is to put the collided re-INVITE into the delayed requests
	  queue with all the other delayed requests and cherry pick the next request
	  that can come off the queue when an event happens.

	  * Changed to put delayed BYE requests at the head of the delayed queue.
	  There is no sense in processing delayed UPDATEs and re-INVITEs when a BYE
	  has been requested.

	  * Made the start of a BYE request flush the delayed requests queue to
	  prevent a delayed request from overlapping the BYE transaction.  I saw a
	  few cases where a delayed re-INVITE got started after the BYE transaction
	  started.

	  * Changed the delayed_request struct to use an enum instead of a string
	  for the request method.  Cherry picking the queue is easier with an enum
	  than string comparisons and the compiler can warn if a switch statement
	  does not cover all defined enum values.

	  * Improved the debug output to give more information.  It helps to know
	  which channel is involved with an endpoint.  Trunks can have many channels
	  associated with the endpoint at the same time.

	  ASTERISK-24727 #close
	  Reported by: Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/4414/
	  ........

	  Merged revisions 431734 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431735 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-12 14:34 +0000 [29f66b0429]  Matt Jordan <mjordan@digium.com>

	* ARI/PJSIP: Add the ability to redirect (transfer) a channel in a Stasis app

	  This patch adds a new feature to ARI to redirect a channel to another server,
	  and fixes a few bugs in PJSIP's handling of the Transfer dialplan
	  application/ARI redirect capability.

	  *New Feature*
	  A new operation has been added to the ARI channels resource, redirect. With
	  this, a channel in a Stasis application can be redirected to another endpoint
	  of the same underlying channel technology.

	  *Bug fixes*
	  In the process of writing this new feature, two bugs were fixed in the PJSIP
	  stack:
	  (1) The existing .transfer channel callback had the limitation that it could
	      only transfer channels to a SIP URI, i.e., you had to pass
	      'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is
	      still supported, it is somewhat unintuitive - particularly in a world full
	      of endpoints. As such, we now also support specifying the PJSIP endpoint to
	      transfer to.
	  (2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by
	      updating its Contact header. Alas, that resulted in the forwarding
	      destination set by the dialplan application/ARI resource/whatever being
	      rewritten with very incorrect information. Hence, we now don't bother
	      updating an outgoing response if it is a 302. Since this took a looong time
	      to find, some additional debug statements have been added to those modules
	      that update the Contact headers.

	  Review: https://reviewboard.asterisk.org/r/4316/

	  ASTERISK-24015 #close
	  Reported by: Private Name

	  ASTERISK-24703 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 431717 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431718 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-11 12:03 +0000 [9d081ed06c]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: dtls_handler causes Asterisk to crash

	  There have been a couple of times where a crash occurred in the dtls_handler
	  section of the code for res_pjsip. Unfortunately, in working this issue the
	  problem was unable to be reproduced. After looking at the backtraces and
	  through the code the current best guess as to why this happened might be due
	  to a reentrance problem and the strtok function. So, the current fix is to
	  convert the strtok function into the reentrant version of the function,
	  strtok_r.

	  ASTERISK-24741 #close
	  Reported by: Zane Conkle
	  Review: https://reviewboard.asterisk.org/r/4409/
	  ........

	  Merged revisions 431698 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431699 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-11 11:45 +0000 [cc85e55d88]  Kevin Harwell <kharwell@digium.com>

	* ari_websockets: removed extra check on websocket session read

	  When merging the websocket timeout issue (ASTERISK-24701) an extra, almost
	  duplicate, check was left in the code that should not have been. This removes
	  it.

	  ASTERISK-24701 #close
	  Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/4412/
	  ........

	  Merged revisions 431693 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431695 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-11 11:39 +0000 [e2d3215b83]  Richard Mudgett <rmudgett@digium.com>

	* HTTP: Stop accepting requests on final system shutdown.

	  There are three CLI commands to stop and restart Asterisk each.

	  1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
	  New channels are prevented while the shutdown request is pending.

	  2) core stop/restart gracefully - Stop or restart Asterisk when there are
	  no calls remaining in the system.  New channels are prevented while the
	  shutdown request is pending.

	  3) core stop/restart when convenient - Stop or restart Asterisk when there
	  are no calls in the system.  New calls are not prevented while the
	  shutdown request is pending.

	  ARI has made stopping/restarting Asterisk more problematic.  While a
	  shutdown request is pending it is desirable to continue to process ARI
	  HTTP requests for current calls.  To handle the current calls while a
	  shutdown request is pending, a new committed to shutdown phase is needed
	  so ARI applications can deal with the calls until the system is fully
	  committed to shutdown.

	  * Added a new shutdown committed phase so ARI applications can deal with
	  calls until the final committed to shutdown phase is reached.

	  * Made refuse new HTTP requests when the system has reached the final
	  system shutdown phase.  Starting anything while the system is actively
	  releasing resources and unloading modules is not a good thing.

	  * Split the bridging framework shutdown to not cleanup the global bridging
	  containers when shutting down in a hurry.  This is similar to how other
	  modules prevent crashes on rapid system shutdown.

	  * Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
	  ast_shutting_down().  You should not have to include channel.h just to
	  access these system functions.

	  ASTERISK-24752 #close
	  Reported by: Matthew Jordan

	  Review: https://reviewboard.asterisk.org/r/4399/
	  ........

	  Merged revisions 431692 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431694 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-11 11:13 +0000 [5a17ed7a38]  Richard Miller (License 5685)

	* channels/chan_sip: Fix RealTime error during SIP unregistration with MariaDB

	  When a SIP device that has its registration stored in RealTime unregisters,
	  the entry for that device is updated with blank values, i.e., "", indicating
	  that it is no longer registered. Unfortunately, one of those values that is
	  'blanked' is the device's port. If the column type for the port is not a
	  string datatype (the recommended type is integer), an ODBC or database error
	  will be thrown. MariaDB does not coerce empty strings to a valid integer value.

	  This patch updates the query run from chan_sip such that it replaces the port
	  value with a value of '0', as opposed to a blank value. This is the value that
	  other database backends coerce the empty string ("") to already, and the
	  handling of reading a RealTime registration value from a backend already
	  anticipates receiving a port of '0' from the backends.

	  ASTERISK-24772 #close
	  Reported by: Richard Miller
	  patches:
	    chan_sip.diff uploaded by Richard Miller (License 5685)
	  ........

	  Merged revisions 431673 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431674 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431675 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-11 11:03 +0000 [8cc50b1ebc]  Corey Farrell <git@cfware.com>

	* Enable REF_DEBUG for ast_module_ref / ast_module_unref.

	  Add ast_module_shutdown_ref for use by modules that can
	  only be unloaded during graceful shutdown.

	  When REF_DEBUG is enabled:
	  * Add an empty ao2 object to struct ast_module.
	  * Allocate ao2 object when the module is loaded.
	  * Perform an ao2_ref in each place where mod->usecount is manipulated.
	  * ao2_cleanup on module unload.

	  ASTERISK-24479 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4141/
	  ........

	  Merged revisions 431662 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431663 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431672 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-11 10:52 +0000 [137c4b0778]  Kevin Harwell <kharwell@digium.com>

	* res_http_websocket: websocket write timeout fails to fully disconnect

	  When writing to a websocket if a timeout occurred the underlying socket did not
	  get closed/disconnected. This patch makes sure the websocket gets disconnected
	  on a write timeout. Also a notice is logged stating that the websocket was
	  disconnected.

	  ASTERISK-24701 #close
	  Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/4412/
	  ........

	  Merged revisions 431669 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431670 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431671 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-10 17:17 +0000 [49161d8df8]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_config_wizard: Add ability to auto-create hints.

	  Looking at the Super Awesome Company sample reminded me that creating hints is 
	  just plain gruntwork.  So you can now have the pjsip conifg wizard auto-create 
	  them for you.

	  Specifying 'hint_exten' in the wizard will create 
	  'exten => <hint_exten>,hint/PJSIP/<wizard_id>'
	  in whatever is specified for 'hint_context'.

	  Specifying 'hint_application' in the wizard will create
	  'exten => <hint_exten>,1,<hint_application>'
	  in whatever is specified for 'hint_context'.

	  The default for 'hint_context' is the endpoint's context.
	  There's no default for 'hint_application'.  If not specified, no app is added.
	  There's no default for 'hint_exten'.  If not specified, neither the hint itself 
	  nor the application will be created.

	  Some may think this is the slippery slope to users.conf but hints are a basic 
	  necessity for phones unlike voicemail, manager, etc that users.conf creates.

	  Tested-by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/4383/
	  ........

	  Merged revisions 431643 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431644 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-08 21:12 +0000 [858e825568]  Ben Merrills (License 6678)

	* res/ari/resource_channels: Add missing 'no_answer' reason to DELETE /channels

	  One of the canonical reasons for hanging up a channel is because the far end
	  failed to answer - or because someone else answered, and we want to get rid of
	  this channel. This patch adds the missing value to the 'reason' query parameter
	  for the DELETE /channels operation.

	  Review: https://reviewboard.asterisk.org/r/4400

	  ASTERISK-24745 #close
	  Reported by: Ben Merrills
	  patches:
	    add_no_answer_ari_hangup_cause.diff uploaded by Ben Merrills (License 6678)
	  ........

	  Merged revisions 431622 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431623 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-08 20:35 +0000 [17247daae6]  ibercom <ibercom123@gmail.com> (License 6599)

	* res/res_odbc: Remove unneeded queries when determining if a table exists

	  This patch modifies the ast_odbc_find_table function such that it only performs
	  a lookup of the requested table if the table is not already known. Prior to
	  this patch, a queries would be executed against the database even if the table
	  was already known and cached.

	  Review: https://reviewboard.asterisk.org/r/4405/

	  ASTERISK-24742 #close
	  Reported by: ibercom
	  patches:
	    patch.diff uploaded by ibercom (License 6599)
	  ........

	  Merged revisions 431617 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431618 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431619 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-08 11:24 +0000 [2ebe811d80]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_sdp_rtp: Fix leak of local ICE candidates when applying to SDP

	  When an SDP is created for an outgoing request/response, the ICE candidates
	  obtained from the RTP instance are currently leaked. This causes the ao2
	  container that holds the candidates to never properly be reclaimed when the
	  RTP instance is destroyed.

	  This patch properly decrements the ICE candidates' container if it is
	  successfully obtained.

	  ASTERISK-24769 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 431600 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431601 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-06 15:26 +0000 [7ca1a0da04]  Scott Griepentrog <sgriepentrog@digium.com>

	* various: cleanup issues found during leak hunt

	  In this collection of small patches to prevent
	  Valgrind errors are: fixes for reference leaks
	  in config hooks, evaluating a parameter beyond
	  bounds, and accessing a structure after a lock
	  where it could have been already free'd.

	  Review: https://reviewboard.asterisk.org/r/4407/
	  ........

	  Merged revisions 431583 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431584 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-03 19:27 +0000 [a79c920aa1]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_keepalive: Don't crash if PJSIP module is not loaded.
	  ........

	  Merged revisions 431555 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431556 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-02-03 18:59 +0000 [03ce56d6c5]  Joshua Colp <jcolp@digium.com>

	* sorcery: Don't try to load object types which haven't been defined.

	  The act of defining wizards for an object type in sorcery.conf will
	  create a minimal object type. This can cause a problem when a module
	  has multiple sorcery instances (which all get the wizards from sorcery.conf
	  applied) but the sorcery instances do not all contain full information
	  about the object types. Upon loading errors will occur stating that
	  the objects can not be created. This is confusing and is actually
	  perfectly fine.

	  This change makes it so that only object types which have been fully
	  defined will be loaded.

	  ASTERISK-24748 #close
	  Reported by: Joshua Colp
	  ........

	  Merged revisions 431538 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431539 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-31 10:28 +0000 [14a57782a6]  Joshua Colp <jcolp@digium.com>

	* res_format_attr_h264: Fix crash when determining joint capability.

	  The res_format_attr_h264 module currently incorrectly attempts to
	  copy SPS and PPS information from the wrong attribute. This change
	  fixes that.

	  ASTERISK-24616 #close
	  Reported by: Yura Kocyuba

	  Review: https://reviewboard.asterisk.org/r/4392/
	  ........

	  Merged revisions 431521 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431522 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-30 11:49 +0000 [23bb5f6a73]  Richard Mudgett <rmudgett@digium.com>

	* app_agent_pool: Fix initial module load agent device state reporting.

	  When the app_agent_pool module initially loads there is a race condition
	  between the thread loading agents.conf and the device state internal
	  processing thread.  If the device state internal processing thread handles
	  the agent creation state updates before the thread that loaded agents.conf
	  registers the device state provider callback then the cached agent state
	  is "Invalid".  When a consumer module like app_queue asks for the agent state
	  it gets the cached "Invalid" state instead of the real state from the provider.

	  * Moved loading the agents.conf configuration to the last thing setup by
	  app_agent_pool in load_module().  Now the device state provider callback
	  is registered before the config is loaded so the agent creation state
	  updates are guaranteed to get the initial device state.

	  * Removed some now redundant config cleanup on error in load_config().

	  * Added lock protection when accessing the device state in
	  agent_pvt_devstate_get() and eliminated the RAII_VAR() usage.

	  ASTERISK-24737 #close
	  Reported by: Steve Pitts

	  Review: https://reviewboard.asterisk.org/r/4390/
	  ........

	  Merged revisions 431492 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431493 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-30 11:41 +0000 [5c9f1b3f51]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_publish: eventually crashes when no response is ever received

	  When Asterisk attempts to send SIP outbound publish information and no response
	  is ever received (no 200 okay, 412, 423) the system eventually crashes. A
	  response is never received because the system Asterisk is attempting to send
	  publish information to is not available. The underlying pjsip framework attempts
	  to send publish information. After several attempts it calls back into the
	  Asterisk outbound publish code. At this point if the "client->queue" is empty
	  Asterisk attempts to schedule a refresh which utilizes "rdata" and since no
	  response was received the given "rdata" struture is NULL. Attempting to
	  dereference a NULL object of course results in a crash.

	  The fix here removes the dependency on rdata for schedule_publish_refresh.
	  Instead param->expiration is now passed to it as this is set to -1 if no
	  response is received. Also added a notification when no response is received.

	  ASTERISK-24635 #close
	  Reported by: Marco Paland
	  Review: https://reviewboard.asterisk.org/r/4384/
	  ........

	  Merged revisions 431490 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431491 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-30 11:21 +0000 [6a76740b83]  Ashley Sanders <asanders@digium.com>

	* HTTP: For httpd server, need option to define server name for security purposes

	  Added a new config property [servername] to the http.conf file; updated the http server to use the new property when sending responses, for showing http status through the CLI and when reporting status through the 'httpstatus' webpage. In this version, [servername] is uncommented by default.

	  ASTERISK-24316 #close
	  Reported By: Andrew Nagy
	  Review: https://reviewboard.asterisk.org/r/4374/
	  ........

	  Merged revisions 431471 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431484 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-30 10:49 +0000 [bd0bdf1e41]  Mark Michelson <mmichelson@digium.com>

	* Fix some memory leaks.

	  These memory leaks were found and fixed by John Hardin. I'm just
	  committing them for him.

	  ASTERISK-24736 #close
	  Reported by Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/4389
	  ........

	  Merged revisions 431468 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431469 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-29 17:03 +0000 [388d691f34]  Scott Griepentrog <sgriepentrog@digium.com>

	* stasis transfer: fix stasis bridge push race part two

	  When swapping a Local channel in place of one already
	  in a bridge (to complete a bridge attended transfer),
	  the channel that was swapped out can actually be hung
	  up before the stasis bridge push callback executes on
	  the independant transfer thread.  This results in the
	  stasis app loop dropping out and removing the control
	  that has the the app name which the local replacement
	  channel needs so it can re-enter stasis.

	  To avoid this race condition a new push_peek callback
	  has been added, and called from the ast_bridge_impart
	  thread before it launches the independant thread that
	  will complete the transfer.  Now the stasis push_peek
	  callback can copy the stasis app name before the swap
	  channel can hang up.

	  ASTERISK-24649
	  Review: https://reviewboard.asterisk.org/r/4382/
	  ........

	  Merged revisions 431450 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431451 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-29 15:20 +0000 [f61c80a8f7]  Mark Michelson <mmichelson@digium.com>

	* Allow disabling of 100rel support on PJSIP endpoints.

	  Due to an inversion error, setting 100rel=no would not actually
	  change the current value of the setting (which defaulted to "yes").
	  With this fix, the inversion is corrected.
	  ........

	  Merged revisions 431420 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431436 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-29 15:02 +0000 [034798e37e]  Mark Michelson <mmichelson@digium.com>

	* Use SIPS URIs in Contact headers when appropriate.

	  RFC 3261 sections 8.1.1.8 and 12.1.1 dictate specific
	  scenarios when we are required to use SIPS URIs in Contact
	  headers. Asterisk's non-compliance with this could actually
	  cause calls to get dropped when communicating with clients
	  that are strict about checking the Contact header.

	  Both of the SIP stacks in Asterisk suffered from this issue.
	  This changeset corrects the behavior in res_pjsip/chan_pjsip.c

	  Review: https://reviewboard.asterisk.org/r/4345
	  ........

	  Merged revisions 431426 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431427 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-29 14:54 +0000 [fe76d4829f]  Mark Michelson <mmichelson@digium.com>

	* Use SIPS URIs in Contact headers when appropriate.

	  RFC 3261 sections 8.1.1.8 and 12.1.1 dictate specific
	  scenarios when we are required to use SIPS URIs in Contact
	  headers. Asterisk's non-compliance with this could actually
	  cause calls to get dropped when communicating with clients
	  that are strict about checking the Contact header.

	  Both of the SIP stacks in Asterisk suffered from this issue.
	  This changeset corrects the behavior in chan_sip.

	  ASTERISK-24646 #close
	  Reported by Stephan Eisvogel

	  Review: https://reviewboard.asterisk.org/r/4346
	  ........

	  Merged revisions 431423 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431424 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431425 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-29 10:47 +0000 [8357ffab9c]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_exten_state: Reduce log clutter... change a WARNING to a VERBOSE/2

	  Reduce log clutter by changing the "Watcher for hint %s (removed|deactivated)"
	  message from WARNING to VERBOSE/2.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4387/
	  ........

	  Merged revisions 431403 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431404 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-29 06:09 +0000 [9893ba7ffb]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Fix DTLS when used with OpenSSL 1.0.1k

	  A recent security fix for OpenSSL broke DTLS negotiation for many
	  applications. This was caused by read ahead not being enabled when it
	  should be. While a commit has gone into OpenSSL to force read ahead
	  on for DTLS it may take some time for a release to be made and the
	  change to be present in distributions (if at all). As enabling read
	  ahead is a simple one line change this commit does that and fixes
	  the issue.

	  ASTERISK-24711 #close
	  Reported by: Jared Biel
	  ........

	  Merged revisions 431384 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431385 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431386 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-28 11:42 +0000 [b3ff43a4e8]  Mark Michelson <mmichelson@digium.com>

	* Fix file descriptor leak in RTP code.

	  SIP requests that offered codecs incompatible with configured values
	  could result in the allocation of RTP and RTCP ports that would not get
	  reclaimed later.

	  ASTERISK-24666 #close
	  Reported by Y Ateya

	  Review: https://reviewboard.asterisk.org/r/4323

	  AST-2015-001
	  ........

	  Merged revisions 431300 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 431303 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431304 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-28 11:34 +0000 [3cccfac399]  Mark Michelson <mmichelson@digium.com>

	* Multiple revisions 431297-431298

	  ........
	    r431297 | mmichelson | 2015-01-28 11:05:26 -0600 (Wed, 28 Jan 2015) | 17 lines
	    
	    Mitigate possible HTTP injection attacks using CURL() function in Asterisk.
	    
	    CVE-2014-8150 disclosed a vulnerability in libcURL where HTTP request injection
	    can be performed given properly-crafted URLs.
	    
	    Since Asterisk makes use of libcURL, and it is possible that users of Asterisk may
	    get cURL URLs from user input or remote sources, we have made a patch to Asterisk
	    to prevent such HTTP injection attacks from originating from Asterisk.
	    
	    ASTERISK-24676 #close
	    Reported by Matt Jordan
	    
	    Review: https://reviewboard.asterisk.org/r/4364
	    
	    AST-2015-002
	  ........
	    r431298 | mmichelson | 2015-01-28 11:12:49 -0600 (Wed, 28 Jan 2015) | 3 lines
	    
	    Fix compilation error from previous patch.
	  ........

	  Merged revisions 431297-431298 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431299 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 431301 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431302 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-28 06:19 +0000 [f080ca6536]  Sean Bright <sean@malleable.com>

	* media formats: update res_format_attr_opus & silk

	  In r419044, we changed how formats were handled, but the return value
	  of the format_parse_sdp_fmtp functions in res_format_attr_opus and
	  res_format_attr_silk were not updated, causing calls to fail.  Ran
	  into this when getting codec_opus working with Asterisk 13.

	  Once the return value was corrected, we were crashing in opus_getjoint
	  because of NULL format attributes.  I've fixed this as well in this
	  patch.

	  Review: https://reviewboard.asterisk.org/r/4371/
	  ........

	  Merged revisions 431267 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431268 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 22:29 +0000 [69e107b24e]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration: Fix reload race condition.

	  Performing a CLI "module reload" command when there are new pjsip.conf
	  registration objects defined frequently failed to load them correctly.

	  What happens is a race condition between res_pjsip pushing its reload into
	  an asynchronous task processor task and the thread that does the rest of
	  the reloads when it gets to reloading the res_pjsip_outbound_registration
	  module.  A similar race condition happens between a reload and the CLI/AMI
	  show registrations commands.  The reload updates the current_states
	  container and the CLI/AMI commands call get_registrations() which builds a
	  new current_states container.

	  * Made res_pjsip.c reload_module() use ast_sip_push_task_synchronous()
	  instead of ast_sip_push_task() to eliminate two threads processing config
	  reloads at the same time.

	  * Made get_registrations() not replace the global current_states container
	  so the CLI/AMI show registrations command cannot interfere with reloading.
	  You could never add/remove objects in the container without the
	  possibility of the container being replaced out from under you by
	  get_registrations().

	  * Added a registration loaded sorcery instance observer to purge any dead
	  registration objects since get_registrations() cannot do this job anymore.
	  The struct ast_sorcery_instance_observer callbacks must be used because
	  the callback happens inline with the load process.  The struct
	  ast_sorcery_observer callbacks are pushed to a different thread.

	  * Added some global current_states NULL pointer checks in case the
	  container disappears because of unload_module().

	  * Made sorcery's struct ast_sorcery_instance_observer.object_type_loaded
	  callbacks guaranteed to be called before any struct
	  ast_sorcery_observer.loaded callbacks will be called.

	  * Moved the check for non-reloadable objects to before the sorcery
	  instance loading callbacks happen to short circuit unnecessary work.
	  Previously with non-reloadable objects, the sorcery instance
	  loading/loaded callbacks would always happen, the individual wizard
	  loading/loaded would be prevented, and the non-reloadable type logging
	  message would be logged for each associated wizard.

	  ASTERISK-24729 #close
	  Review: https://reviewboard.asterisk.org/r/4381/
	  ........

	  Merged revisions 431243 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431251 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 16:58 +0000 [c7591ef6bc]  Kevin Harwell <kharwell@digium.com>

	* tcptls: Bad file descriptor error when reloading chan_sip

	  While running through some scenarios using chan_sip and tcp a problem would
	  occur that resulted in a flood of bad file descriptor messages on the cli:

	  tcptls.c:712 ast_tcptls_server_root: Accept failed: Bad file descriptor

	  The message is received because the underlying socket has been closed, so is
	  valid. This is probably happening because unloading of chan_sip is not atomic.
	  That however is outside the scope of this patch. This patch simply stops the
	  logging of multiple occurrences of that message.

	  ASTERISK-24728 #close
	  Reported by: Thomas Thompson
	  Review: https://reviewboard.asterisk.org/r/4380/
	  ........

	  Merged revisions 431218 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431219 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431220 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 13:31 +0000 [e826cb8a26]  Jonathan Rose <jrose@digium.com>

	* Manager: Fix Manager Action ModuleLoad to give correct response when reloading

	  Prior to this patch, ModuleLoad would respond with an error indicating that
	  the requested module wasn't found in spite of finding and reloading the
	  module.

	  Review: https://reviewboard.asterisk.org/r/4373/
	  ASTERISK-24721 #close
	  ........

	  Merged revisions 431153 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431201 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 13:22 +0000 [3b0f03ef7b]  Kevin Harwell <kharwell@digium.com>

	* chan_sip: stale nonce causes failure

	  When refreshing (with a small expiration) a registration that was sent to
	  chan_sip the nonce would be considered stale and reject the registration.
	  What was happening was that the initial registration's "dialog" still existed
	  in the dialogs container and upon refresh the dialog match algorithm would
	  choose that as the "dialog" instead of the newly created one. This occurred
	  because the algorithm did not check to see if the from tag matched if
	  authentication info was available after the 401. So, it ended up assuming
	  the original "dialog" was a match and stopped the search. The old "dialog"
	  of course had an old nonce, thus the stale nonce message.

	  This fix attempts to leave the original functionality alone except in the case
	  of a REGISTER. If a REGISTER is received if searches for an existing "dialog"
	  matching only on the callid. If the expires value is low enough it will reuse
	  dialog that is there, otherwise it will create a new one.

	  ASTERISK-24715 #close
	  Reported by: John Bigelow
	  Review: https://reviewboard.asterisk.org/r/4367/
	  ........

	  Merged revisions 431187 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431194 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431197 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 13:12 +0000 [e62bd46511]  Corey Farrell <git@cfware.com> (license 5909)

	* res_pjsip: make it unloadable (take 2)

	  Due to the original patch causing memory corruptions it was removed until the
	  problem could be resolved. This patch is the original patch plus some added
	  locking around stasis router subcription that was needed to avoid the memory
	  corruption.

	  Description of the original problem and patch (still applicable):

	  The res_pjsip module was previously unloadable. With this patch it can now
	  be unloaded.

	  This patch is based off the original patch on the issue (listed below) by Corey
	  Farrell with a few modifications. Namely, removed a few changes not required to
	  make the module unloadable and also fixed a bug that would cause asterisk to
	  crash on unloading.

	  This patch is the first step (should hopefully be followed by another/others at
	  some point) in allowing res_pjsip and the modules that depend on it to be
	  unloadable. At this time, res_pjsip and some of the modules that depend on
	  res_pjsip cannot be unloaded without causing problems of some sort.

	  The goal of this patch is to get res_pjsip and only res_pjsip to be able to
	  unload successfully and/or shutdown without incident (crashes, leaks, etc...).
	  Other dependent modules may still cause problems on unload.

	  Basically made sure, with the patch applied, that res_pjsip (with no other
	  dependent modules loaded) could be succesfully unloaded and Asterisk could
	  shutdown without any leaks or crashes that pertained directly to res_pjsip.

	  ASTERISK-24485 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4363/
	  patches:
	    pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
	  ........

	  Merged revisions 431179 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431180 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 11:48 +0000 [94eebd5ba5]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Repeatedly starting and stopping recording ref leaks the recording channel.

	  Starting and stopping conference recording more than once causes the
	  recording channels to be leaked.  For v13 the channels also show up in the
	  CLI "core show channels" output.

	  * Reworked and simplified the recording channel code to use
	  ast_bridge_impart() instead of managing the recording thread in the
	  ConfBridge code.  The recording channel's ref handling easily falls into
	  place and other off nominal code paths get handled better as a result.

	  ASTERISK-24719 #close
	  Reported by: John Bigelow

	  Review: https://reviewboard.asterisk.org/r/4368/
	  Review: https://reviewboard.asterisk.org/r/4369/
	  ........

	  Merged revisions 431135 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431160 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431161 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 11:34 +0000 [a43d24a9d3]  Joshua Colp <jcolp@digium.com>

	* bridge / res_pjsip_sdp_rtp: Fix issues with media not being reinvited during direct media.

	  This change fixes two issues:

	  1. During a swap operation bridging added the new channel before having the swap channel
	  leave. This was not handled in bridge_native_rtp and could result in a channel not getting
	  reinvited back to Asterisk. After this change the swap channel will leave first and the
	  new channel will then join.

	  2. If a re-invite was received after a session had been established any upstream elements
	  (such as bridge_native_rtp) were not notified that they may want to re-evaluate things.
	  After this change an UPDATE_RTP_PEER control frame is queued when this situation occurs
	  and upstream can react.

	  AST-1524 #close

	  Review: https://reviewboard.asterisk.org/r/4378/
	  ........

	  Merged revisions 431157 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431158 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 11:21 +0000 [fb8a2e0399]  Matt Jordan <mjordan@digium.com>

	* ARI: Improve wiki documentation

	  This patch improves the documentation of ARI on the wiki. Specifically, it
	  addresses the following:
	  * Allowed values and allowed ranges weren't documented. This was particularly
	    frustrating, as Asterisk would reject query parameters with disallowed values
	    - but we didn't tell anyone what the allowed values were.
	  * The /play/id operation on /channels and /bridges failed to document all of
	    the added media resource types.
	  * Documentation for creating a channel into a Stasis application failed to
	    note when it occurred, and that creating a channel into Stasis conflicts with
	    creating a channel into the dialplan.
	  * Some other minor tweaks in the mustache templates, including italicizing the
	    parameter type, putting the default value on its own sub-bullet, and some
	    other nicities.

	  Review: https://reviewboard.asterisk.org/r/4351
	  ........

	  Merged revisions 431145 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431148 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 11:16 +0000 [aa8fd7d1b9]  Matt Jordan <mjordan@digium.com>

	* app_confbridge: Restore user's menu name to CLI output of 'confbridge list'

	  When issuing a 'confbridge list XXXX' CLI command, the resulting output no
	  longer displays the menu associated with a ConfBridge participant.

	  The issue was caused by ASTERISK-22760. When that patch was done, it removed
	  the copying of the menu name associated with the user from the actual user
	  profile.

	  This patch fixes the issue by copying the menu name over to the user profile
	  when the menu hooks are applied to the user. Since that function now does a
	  little bit more than just apply the hooks, the name of the function has been
	  changed to cover the copying of the menu name over as well.

	  In addition, there is a disparity between the menu name length as it is stored
	  on the conf_menu structure and the confbridge_user structure; this patch makes
	  the lengths match so that a strcpy can be used.

	  Review: https://reviewboard.asterisk.org/r/4372/

	  ASTERISK-24723 #close
	  Reported by: Steve Pitts
	  ........

	  Merged revisions 431134 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431136 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-27 05:47 +0000 [2504f97b01]  Joshua Colp <jcolp@digium.com>

	* res_parking: Fix crash due to race condition when unloading.

	  There is currently a race condition when unloading the res_parking
	  module. Depending on the will of the universe the subscription
	  invocation may occur AFTER the module is unloaded. This is because
	  the module does NOT use stasis_unsubscribe_and_join when terminating
	  the subscription. It merely uses stasis_unsubscribe.

	  This change makes it use stasis_unsubscribe_and_join which is documented
	  for usage in this exact scenario.

	  AST-1520 #close

	  Review: https://reviewboard.asterisk.org/r/4375/
	  ........

	  Merged revisions 431114 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431115 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-26 08:50 +0000 [965777ccfc]  David M. Lee <dlee@digium.com>

	* Various fixes for OS X

	  This patch addresses compilation errors on OS X. It's been a while, so
	  there's quite a few things.

	   * Fixed __attribute__ decls in route.h to be portable.
	   * Fixed htonll and ntohll to work when they are defined as macros.
	   * Replaced sem_t usage with our ast_sem wrapper.
	   * Added ast_sem_timedwait to our ast_sem wrapper.
	   * Fixed some GCC 4.9 warnings using sig*set() functions.
	   * Fixed some format strings for portability.
	   * Fixed compilation issues with res_timing_kqueue (although tests still fail
	     on OS X).
	   * Fixed menuconfig /sbin/launchd detection, which disables res_timing_kqueue
	     on OS X).

	  ASTERISK-24539 #close
	  Reported by: George Joseph

	  ASTERISK-24544 #close
	  Reported by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4327/
	  ........

	  Merged revisions 431092 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431093 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-25 07:43 +0000 [a8ae5a7bcb]  Matt Jordan <mjordan@digium.com>

	* dynamic realtime: Updates fail to work due to update fields being passed over

	  When a crash was fixed due to usage of the REALTIME function in r423003, a
	  regression was introduced into ast_update2_realtime where the update fields
	  passed to the function would be skipped and the lookup field processed twice.

	  The use of this function is a bit interesting: A variable argument list is
	  used with two sentinel values - the first marks the end of the lookup
	  fields/values; the second marks the end of the update fields/values.
	  Unfortunately, ast_update2_realtime parses over the lookup fields twice, as
	  opposed to parsing over the update fields. This causes the lookups to succeed,
	  but the updates itself to have no effect.

	  Note that the most common instance of this problem occurred in app_voicemail
	  during the updating of a mailbox password.

	  Thanks to the issue reporter, Paddy Grice, for pointing out the problem.

	  Review: https://reviewboard.asterisk.org/r/4356/

	  ASTERISK-24231

	  ASTERISK-24626 #close
	  Reported by: Paddy Grice
	  ........

	  Merged revisions 431072 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431073 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-23 14:17 +0000 [b69b0d12ee]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Shorten CBRec channel names to CBRec/<conf_name>-<seq-num>

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431055 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-23 14:14 +0000 [c780223507]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Make CBRec channel names more unique.

	  Channel names should be different from other channels in the system while
	  the channel exists.

	  * Use a sequence number for CBRec channels instead of a random number
	  because the same random number could be picked again for the next CBRec
	  channel.
	  ........

	  Merged revisions 431052 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431053 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-23 13:51 +0000 [b38be992b1]  Richard Mudgett <rmudgett@digium.com>

	* app_confbridge: Whitespace

	  Because there is sometimes no sence to any whitespace.
	  ........

	  Merged revisions 431049 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 431050 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431051 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-23 12:46 +0000 [89610adda5]  David M. Lee <dlee@digium.com>

	* Add depend on pjproject to res_pjsip_config_wizard.c
	  ........

	  Merged revisions 431030 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431034 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-23 09:21 +0000 [ca02121ef7]  Kevin Harwell <kharwell@digium.com>

	* Investigate and fix memory leaks in Asterisk

	  Fixed memory leaks that were found in Asterisk.

	  ASTERISK-24693 #close
	  Reported by:  Kevin Harwell
	  Review: https://reviewboard.asterisk.org/r/4347/
	  ........

	  Merged revisions 430999 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431010 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-23 09:13 +0000 [49cbfa7de6]  Walter Doekes <walter+asterisk@wjd.nu>

	* Fix typo's (retrieve, specified, address).
	  ........

	  Merged revisions 430996 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430998 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431000 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-23 08:39 +0000 [874cb5615d]  HZMI8gkCvPpom0tM (License 6658)

	* chan_sip: Case insensitive comparison of "defaultuser" parameter.

	  All the other configuration options are case insensitive, so this one
	  should be too.

	  ASTERISK-24355 #close
	  Reported by: HZMI8gkCvPpom0tM
	  patches:
	    ast.patch uploaded by HZMI8gkCvPpom0tM (License 6658)
	  ........

	  Merged revisions 430993 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430994 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430995 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-22 13:30 +0000 [9bff4eeca3]  Richard Mudgett <rmudgett@digium.com>

	* Bridge core: Pass a ref with the swap channel when joining a bridge.

	  When code imparts a channel into a bridge to swap with another channel, a
	  ref needs to be held on the swap channel to ensure that it cannot
	  dissapear before finding it in the bridge.

	  * The ast_bridge_join() swap channel parameter now always steals a ref for
	  the swap channel.  This is the only change to the bridge framework's
	  public API semantics.

	  * bridge_channel_internal_join() now requires the bridge_channel->swap
	  channel to pass in a ref.

	  ASTERISK-24649
	  Reported by: John Bigelow

	  Review: https://reviewboard.asterisk.org/r/4354/
	  ........

	  Merged revisions 430975 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430976 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-22 13:14 +0000 [e67ca431ee]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Minor code cleanup.

	  * Add an allocation failure check and assert in
	  sip_outbound_registration_response_cb().

	  * Made sip_outbound_registration_state_destroy() handle partially created
	  state objects from sip_outbound_registration_state_alloc().

	  Review: https://reviewboard.asterisk.org/r/4366/
	  ........

	  Merged revisions 430957 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430958 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-22 12:10 +0000 [49f405fe4c]  Scott Griepentrog <sgriepentrog@digium.com>

	* stasis transfer: fix a race condition on stasis bridge push

	  After a bridge transfer completes where a local replacement
	  channel is used, a stasis transfer message with the details
	  of the transfer is sent.  This is processed by stasis which
	  then sets the stasis app name and replaced channel snapshot
	  on the replacement channel.

	  However, since a separate thread was already started to run
	  stasis on the new replacement channel, a race was on to see
	  if the message processing would be completed before the app
	  name was needed, otherwise the channel would be hung up.

	  This change moves the calls used to set the stasis app name
	  and the replace snapshot to the bridge_stasis_push function
	  callback from the bridge transfer logic, allowing the steps
	  to be completed earlier and more deterministically, and the
	  race elimianted.

	  NOTE: the swap channel parameter to bridge_stasis_push (and
	  thus all bridge push callbacks) must always be present when
	  performing a swap with another channel.

	  ASTERISK-24649 #close
	  Reported by: John Bigelow
	  Review: https://reviewboard.asterisk.org/r/4341/
	  ........

	  Merged revisions 430939 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430940 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-22 08:23 +0000 [7fcc9ce8bc]  Gareth Palmer (License 5169)

	* apps/app_voicemail: Trigger MWI notification with MixMonitor m() option

	  The MixMonitor m() option allows a recording to be pushed to a specific
	  voicemail mailbox. If the message is delivered to the mailbox's INBOX, however,
	  no MWI notification is currently raised.

	  This patch corrects the issue by properly calling notify_new_state from the
	  msg_create_from_file function. This will cause MWI to be triggered if the
	  message was placed in the mailbox's INBOX.

	  ASTERISK-24709 #close
	  Reported by: Gareth Palmer
	  patches:
	    app_voicemail-430919.patch uploaded by Gareth Palmer (License 5169)
	  ........

	  Merged revisions 430920 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430921 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430922 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-21 15:57 +0000 [38738a7316]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_outbound_registration.c: Move unref to a better place.

	  Move an unconditional unref of client_state so it doesn't look like it
	  could be used after the last ref has destroyed it.
	  ........

	  Merged revisions 430902 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430903 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-21 07:36 +0000 [5835bf7a7f]  Matt Jordan <mjordan@digium.com>

	* channels/chan_sip: Fix registration leak during reload

	  When the SIP registrations were migrated to using ao2 in what was then trunk,
	  the explicit destruction of the registrations on module reload was removed and
	  not replaced with an ao2 equivalent. Debugging done by Stefan Engström, the
	  issue reporter, on ASTERISK-24673 confirmed that the reference in the
	  registry_list container was being leaked.

	  Since the purpose of cleanup_all_regs is to prep a registration for
	  destruction, this function now calls an ao2_callback function callback with the
	  OBJ_MULTIPLE | OBJ_NODATA | OBJ_UNLINK flags used to remove the registrations.
	  This cleans up each registration, and also removes it from the registration
	  container registry_list.

	  Review: https://reviewboard.asterisk.org/r/4355/

	  ASTERISK-24640 #close
	  Reported by: Max Man

	  ASTERISK-24673 #close
	  Reported by: Stefan Engström
	  Tested by: Stefan Engström
	  ........

	  Merged revisions 430864 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430866 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-21 07:27 +0000 [958a41a884]  Matt Jordan <mjordan@digium.com>

	* AMI: Add documentation for the missing Cdr/CEL events.

	  This patch adds AMI event documentation for the Cdr and CEL AMI events.

	  Note that while these events do share fields with each other and with other
	  channel related events, they do not contain all of the fields in a standard
	  channel snapshot, nor is the description of the fields identical. As such,
	  the patch opts for documentation for each field, for each event.

	  Review: https://reviewboard.asterisk.org/r/4350/

	  ASTERISK-24671 #close
	  Reported by: Dan Jenkins
	  ........

	  Merged revisions 430862 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430863 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-21 07:12 +0000 [4740ef50f4]  Matt Jordan <mjordan@digium.com>

	* apps/app_dial: Don't publish DialEnd twice on unexpected GoSub/Macro values

	  The Dial application has some interesting options with the mid-call Macro (M)
	  and GoSub (U) options. If the MACRO_RESULT/GOSUB_RESULT returns specific
	  values, the Dial application will take some action upon the channels involved
	  in the dial operation (such as hanging up a particular party, etc.) The Dial
	  application ensures that a Stasis message is published in the event that
	  MACRO_RESULT/GOSUB_RESULT returns a value that kills the dial operation, so
	  that there is a corresponding DialEnd event published in AMI/ARI for the
	  DialBegin event that preceeded it.

	  A bug exists where that same DialEnd event will be published on Stasis even if
	  the value returned in MACRO_RESULT/GOSUB_RESULT is not one that the Dial
	  application cares about. This causes two DialEnd events to be published - one
	  with the MACRO_RESULT/GOSUB_RESULT and another with "ANSWERED" - which is all
	  sorts of wrong.

	  This patch fixes the bug by ensuring that we only publish a DialEnd message to
	  Stasis if the Dial application's mid-call Macro/GoSub returns something that
	  Dial cares about.

	  Review: https://reviewboard.asterisk.org/r/4336

	  ASTERISK-24682 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 430842 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430844 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-21 07:06 +0000 [228fdb3f4e]  Matt Jordan <mjordan@digium.com>

	* main/rtp_engine: Format NTP timestamps as unsigned longs

	  When the RTCP reports are created, the NTP timestamps are stored as strings,
	  as JSON does not have an integer type long enough to store the value. However,
	  on 32-bit systems, a signed long may overflow for some portion of the
	  timestamp.

	  This patch corrects the overflow by formatting the timestamps as unsigned
	  longs.
	  ........

	  Merged revisions 430840 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430841 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-20 11:15 +0000 [804ab70f9d]  Ashley Sanders <asanders@digium.com>

	* ARI: Fixed crash that occurred when updating a bridge when the optional query parameter 'name' was not supplied.

	  Prior to this changeset, posting to the: /ari/bridges/{bridgeId} endpoint without specifying a value for the [name] query parameter, would crash Asterisk if the bridge you are attempting to create (or update) had the same ID as an existing bridge. The internal mechanism of the POST operation interpreted a null value for name, thus resulting in an error condition that crashed Asterisk.

	  ASTERISK-24560 #close
	  Reported By: Kinsey Moore

	  Review: https://reviewboard.asterisk.org/r/4349/
	  ........

	  Merged revisions 430818 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430820 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-20 10:59 +0000 [e4738a59eb]  Richard Mudgett <rmudgett@digium.com>

	* CHANNEL(peer), chan_iax2, res_fax, SNMP agent: Fix deadlock from reaching across a bridge.

	  Calling ast_channel_bridge_peer() cannot be done while holding any channel
	  locks.  The reported issue hit the deadlock in chan_iax2, but an audit of
	  the ast_channel_bridge_peer() calls found three more locations where the
	  same deadlock can occur.

	  * Made CHANNEL(peer), res_fax, and the SNMP agent not call
	  ast_channel_bridge_peer() with any channel locked.  For CHANNEL(peer) I
	  had to rework the logic to not hold the channel lock.

	  * Made chan_iax2 no longer call ast_channel_bridge_peer().  It was done
	  for legacy reasons that no longer apply.

	  * Removed the iax.conf forcejitterbuffer option.  It is now always enabled
	  when the jitterbuffer option is enabled.  If you put a jitter buffer on a
	  channel it will be on the channel.

	  ASTERISK-24600 #close
	  Reported by: Jeff Collell

	  Review: https://reviewboard.asterisk.org/r/4342/
	  ........

	  Merged revisions 430817 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430819 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-19 20:41 +0000 [14b8e03dad]  Ben Klang (License 5876)

	* contrib/scripts/install_prereq: Don't install 32-bit packages on 64-bit hosts

	  On Debian based systems, the install_prereq tool uses a search command on
	  Debian that results in selecting both 64-bit and 32-bit packages. Besides the
	  waste of disk space, this can actually cause aptitude use 100% of memory on a
	  VM with 1GB of RAM as it tried to work out all of the 32-bit package
	  dependencies.

	  This patch filters out the 32-bit packages on a 64-bit machine, and leaves
	  32-bit machines alone.

	  ASTERISK-24048 #close
	  Reported by: Ben Klang
	  Tested by: Ben Klang, Matt Jordan
	  patches:
	    install_prereq_64-bit_compat.patch uploaded by Ben Klang (License 5876)
	  ........

	  Merged revisions 430798 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430799 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430800 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-19 20:33 +0000 [112bf1597e]  LEI FU (License 6640)

	* app_voicemail: Temp message left after review/hangup with ODBC/IMAP backend

	  When using ODBC or IMAP storage, temporary files created on the file system
	  must be disposed of using the DISPOSE macro. The DELETE macro will map to a
	  deletion function for the backend storage, but does not clean up any local
	  files created as a result of the operation.

	  When using voicemail with the operator and review options enabled, pressing
	  0 to enter the menu, followed by 1 to save the message, followed by any
	  other DTMF press to delete the message, will result in the temporary file
	  lingering on the file system.

	  This patch properly calls DISPOSE after the DELETE. This causes the local
	  file to be disposed of.

	  ASTERISK-24288 #close
	  Reported by: LEI FU
	  patches:
	    voicemail_odbc_review_fix.diff uploaded by LEI FU (License 6640)
	  ........

	  Merged revisions 430795 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430796 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430797 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-19 12:15 +0000 [7dc784ffa9]  Mark Michelson <mmichelson@digium.com>

	* Call extension state callbacks at hint creation.

	  When a hint gets created, any subsequent device or presence
	  state changes result in extension status events getting sent
	  out to interested parties. However, at the time of hint creation,
	  no such event gets sent out, so watchers of extension state are
	  potentially left in the dark until the first state change after
	  hint creation.

	  Patch contributed by John Hardin (License #6512)
	  ........

	  Merged revisions 430776 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430777 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-19 07:19 +0000 [e43912f3f3]  Joshua Colp <jcolp@digium.com>

	* res_pjsip / res_pjsip_multihomed: Use the correct transport and addressing information on UAS sessions.

	  The first thing this patch fixes is UAS dialogs. Previously if a transport was
	  configured on an endpoint and an inbound session was created there was no guarantee
	  that requests sent on the dialog would use the correct transport and address
	  information. This has now been fixed so an explicitly configured transport
	  is taken into account.

	  The second thing this patch fixes is res_pjsip_multihomed. The res_pjsip_multihomed
	  module attempts to determine what transport a message should go out on and what
	  addressing information should go into the message itself. In a scenario where
	  multiple transports exist bound to the same IP address but a different port the
	  code would incorrectly alter the transport and change the message to the wrong
	  transport. This change makes the res_pjsip_multihomed module smarter so it will
	  only change the transport and address information in the message when it is
	  possible and makes sense.

	  ASTERISK-24615 #close
	  Reported by: David Justl

	  Review: https://reviewboard.asterisk.org/r/4331/
	  ........

	  Merged revisions 430755 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430756 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-16 18:35 +0000 [07e2a48ab1]  Kevin Harwell <kharwell@digium.com>

	* REVERTING res_pjsip: make it unloadable

	  Due to the original patch causing memory corruptions the patch is
	  being removed until the problem can be resolved.
	  ........

	  Merged revisions 430734 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430735 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-16 16:14 +0000 [1111944afb]  Mark Michelson <mmichelson@digium.com>

	* Change PJProject version requirement for ca_list_path transport option in CHANGES file.
	  ........

	  Merged revisions 430716 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430717 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-16 16:13 +0000 [831acba826]  Mark Michelson <mmichelson@digium.com>

	* Fix problem where a hung channel could occur on a failed blind transfer.

	  Different clients react differently to being told that a blind transfer
	  has failed. Some will simply send a BYE and be done with it. Others will
	  attempt to reinvite themselves back onto the call.

	  In the latter case, we were creating a new channel and then leaving it to
	  sit forever doing nothing. With this code change, that new channel will
	  not be created and the dialog with the transferring channel will be cleaned
	  up properly.

	  ASTERISK-24624 #close
	  Reported by Zane Conkle

	  Review: https://reviewboard.asterisk.org/r/4339
	  ........

	  Merged revisions 430714 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430715 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-16 15:46 +0000 [023fa0f9e8]  cloos <cloos@jhcloos.com> (License #5956)

	* Add support for the ca_list_path option for PJSIP transports.

	  This allows for a path to be specified that has a collection of CA
	  certificates in it.

	  ASTERISK-24575 #close
	  Reported by cloos
	  Patches:
	  	pj-ca-path-trunk.diff uploaded by cloos (License #5956)

	  Review: https://reviewboard.asterisk.org/r/4344
	  ........

	  Merged revisions 430709 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430713 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-15 11:36 +0000 [a8ea2f9287]  Richard Mudgett <rmudgett@digium.com>

	* res_fax.c, res_fax_spandsp.c: Remove redundant locking.

	  When FAX was developed, apparently the faxregistry.container used to be a
	  linked list that was converted to an ao2 container.  Some of the
	  replacement ao2 container operations still had explicit lock/unlocks
	  around them.

	  Three off nominal code paths in res_fax.c and res_fax_spandsp.c unlock the
	  channel even though the routine did not lock the channel and other code
	  paths in the routine do not unlock the channel.

	  Review: https://reviewboard.asterisk.org/r/4340/
	  ........

	  Merged revisions 430687 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430688 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-15 11:28 +0000 [9b1c36d3fa]  Richard Mudgett <rmudgett@digium.com>

	* res_fax.c, res_fax_spandsp.c: Fix some curlies on the end of function definitions.
	  ........

	  Merged revisions 430685 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430686 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-15 06:10 +0000 [1e605d950b]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_outbound_registration: Fix race condition when reloading and listing registrations.

	  Due to the split of outbound registration state from configuration it is possible during
	  a reload for a "pjsip show registrations" CLI command to be executed which gets an older
	  snapshot of the configuration. This configuration may include outbound registrations which
	  have been removed due to a reload operation occurring at the same time. The code for
	  printing the outbound registration did not take this into account but now it does.

	  AST-1506 #close

	  Review: https://reviewboard.asterisk.org/r/4338/
	  ........

	  Merged revisions 430664 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430665 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-14 20:19 +0000 [f11fb76205]  abelbeck <lonnie@abelbeck.com> (License 5903)

	* configure: If cross-compiling, assume we have working semaphores

	  The Asterisk 13 configure.ac checks for HAS_WORKING_SEMAPHORE but does not have
	  an option for cross-compiling so it fails with an exit. Since we're cross-
	  compiling, we can't exactly go looking for the header. The semaphore.h header
	  is relatively common:
	  * It's part of the POSIX standard
	  * It's part of GNU C Library
	  As such, we assume that it will be present when cross-compiling.

	  As such, this patch defaults "HAS_WORKING_SEMAPHORE" to "1" if cross-compiling
	  is detected.

	  If you're cross-compiling to a platform that doesn't support this, then make
	  sure you re-define this to 0.

	  ASTERISK-24663 #close
	  Reported by: abelbeck
	  patches:
	    asterisk-13-anonymous-semaphores.patch uploaded by abelbeck (License 5903)
	  ........

	  Merged revisions 430646 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430647 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-14 17:15 +0000 [49542a794b]  Corey Farrell <git@cfware.com> (license 5909)

	* res_pjsip: make it unloadable

	  The res_pjsip module was previously unloadable. With this patch it can now
	  be unloaded.

	  This patch is based off the original patch on the issue (listed below) by Corey
	  Farrell with a few modifications. Namely, removed a few changes not required to
	  make the module unloadable and also fixed a bug that would cause asterisk to
	  crash on unloading.

	  This patch is the first step (should hopefully be followed by another/others at
	  some point) in allowing res_pjsip and the modules that depend on it to be
	  unloadable. At this time, res_pjsip and some of the modules that depend on
	  res_pjsip cannot be unloaded without causing problems of some sort.

	  The goal of this patch is to get res_pjsip and only res_pjsip to be able to
	  unload successfully and/or shutdown without incident (crashes, leaks, etc...).
	  Other dependent modules may still cause problems on unload.

	  Basically made sure, with the patch applied, that res_pjsip (with no other
	  dependent modules loaded) could be succesfully unloaded and Asterisk could
	  shutdown without any leaks or crashes that pertained directly to res_pjsip.

	  ASTERISK-24485 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4311/
	  patches:
	    pjsip_unload-broken-r1.patch submitted by Corey Farrell (license 5909)
	  ........

	  Merged revisions 430628 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430629 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-14 14:39 +0000 [67234b3ee2]  Mark Michelson <mmichelson@digium.com>

	* Prevent slow graceful shutdown when outbound publications never started.

	  The code was missing the case for explicitly destroying an outbound publication
	  when Asterisk had never actually published anything. The result was that Asterisk
	  would hang for a while on a graceful shutdown.

	  With this change, the case is taken into account, and on a graceful shutdown, these
	  publications are destroyed without the need to actually send a PUBLISH request.

	  ASTERISK-24655 #close
	  Reported by Kevin Harwell

	  Review: https://reviewboard.asterisk.org/r/4325
	  ........

	  Merged revisions 430608 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430609 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-14 09:40 +0000 [3eec8e4c44]  Diederik de Groot (License 6600)

	* build_tools/mkpkgconfig: Fix Cflags concatenation error in asterisk.pc

	  The mkpkgconfig script incorrectly concatenates Cflags options together. As an
	  example, the following:
	  Cflags: -I/usr/include/libxml2 -g3

	  Is instead generated as:
	  Cflags: -I/usr/include/libxml2-g3

	  This patch corrects the generation of Cflags in mkpkgconfig such that the
	  Cflags options are output correctly.

	  Review: https://reviewboard.asterisk.org/r/3707/

	  ASTERISK-23991 #close
	  Reported by: Diederik de Groot
	  patches:
	    fix_mkpkgconfig.diff uploaded by Diederik de Groot (License 6600)
	  ........

	  Merged revisions 430589 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430590 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430591 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-13 12:17 +0000 [1780de95e4]  Richard Mudgett <rmudgett@digium.com>

	* app_macro: Don't restore the calling location on a channel redirect.

	  v11: If a channel redirect to a macro exten of a macro that is active
	  happens, the redirect location doesn't get executed.  Instead the original
	  macro location is restored and gets reexecuted.

	  v13: An additional effect happens if a parked call times out to an
	  extension in the macro that parked the call then the macro is reexecuted
	  instead of the expected park return location.

	  * Made not restore the macro calling location on an
	  AST_SOFTHANGUP_ASYNCGOTO.

	  * Increased the locked channel range when setting up the macro execution
	  environment to cover things that should be done while the channel is
	  locked.

	  * Removed unnecessary NULL tests before calling ast_free() in
	  _macro_exec().

	  ASTERISK-23850 #close
	  Reported by: Andrew Nagy

	  Review: https://reviewboard.asterisk.org/r/4292/
	  ........

	  Merged revisions 430564 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430565 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430567 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-13 06:09 +0000 [0e631a541d]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Add configure check for 'pjsip_get_dest_info' function.

	  The 'pjsip_get_dest_info' function is used to determine if the signaling transport
	  of the dialog is secure or not. This function was added in PJSIP 2.3 and does not
	  exist in earlier versions.

	  This configure check allows Asterisk to build and run with older versions at the
	  loss of the 'secure' argument for the PJSIP CHANNEL dialplan function. Usage of
	  this argument will require upgrading to PJSIP 2.3.

	  ASTERISK-24665 #close
	  Reported by: Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/4329/
	  ........

	  Merged revisions 430546 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430547 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-12 13:13 +0000 [4dd6b6ff59]  Richard Mudgett <rmudgett@digium.com>

	* AMI: Revert non-backwards compatible changes from earlier commit.

	  * Reverted the change to astman_send_listack() to not use the listflag
	  parameter and always set the value to "Start" so the start capitalization
	  is consistent.  Unfortunately changing the case of a returned value is not
	  a backward compatible change so for now FAXSessions is going to have to
	  remain inconsistent with all of the other AMI list actions.

	  * Reverted the minor protocol error fix in action_getconfig() when no
	  requested categories are found.  Each line needs to be formatted as
	  "Header: text".

	  Caught by the testsuite.

	  ASTERISK-24049
	  ........

	  Merged revisions 430528 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430529 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-12 12:28 +0000 [aa7e06f797]  Niklas Larsson (License 5068)

	* configs/samples/features.conf.sample: Document attended transfer DTMF options

	  The sample config was missing the configuration options for DTMF attended
	  transfer completion scenarios. The configuration options 'atxferabort',
	  'atxfercomplete', 'atxferthreeway', and 'atxferswap' are now documented in the
	  appropriate configuration file.

	  ASTERISK-24678 #close
	  Reported by: Niklas Larsson
	  patches:
	    features.conf.sample.diff uploaded by Niklas Larsson (License 5068)
	  ........

	  Merged revisions 430526 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430527 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-12 12:09 +0000 [c7ea108e02]  Richard Mudgett <rmudgett@digium.com>

	* Revert -r430452 It needs to be redone for the next major AMI version change instead.

	  ASTERISK-24049


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430509 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-12 12:01 +0000 [9065488ddd]  Michael L. Young (license 5026)

	* main/syslog: Allow dynamic logs, such as security events, to log to the syslog

	  The security event log uses a dynamic log level (SECURITY) that is registered
	  with the Asterisk logging core. Unfortunately, the syslog would ignore log
	  statements that had a dynamic log level associated with them. Because the
	  syslog cannot handle ad hoc dynamic log levels, this patch treats any dynamic
	  log entries sent to the syslog as logs with a level of NOTICE.

	  ASTERISK-20744 #close
	  Reported by: Michael Keuter
	  Tested by: Michael L. Young, Jacek Konieczny
	  patches:
	    asterisk-20744-syslog-dynamic-logging_trunk.diff uploaded by Michael L. Young (license 5026)
	  ........

	  Merged revisions 430506 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430507 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430508 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-12 09:18 +0000 [b38acbce6e]  Kristian Hogh (License 6639)

	* funcs/func_curl: Fix memory leak when CURLOPT channel datastore is destroyed

	  When the channel datastore associated with the usage of CURLOPT on a specific
	  channel is freed, the underlying structure holding the list of options is not
	  disposed of. This patch properly frees the structure in the datastore .destroy
	  callback.

	  ASTERISK-24672 #close
	  Reported by: Kristian Hogh
	  patches:
	    func_curl-memory-leak.diff uploaded by Kristian Hogh (License 6639)
	  ........

	  Merged revisions 430487 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430488 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430489 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-09 16:09 +0000 [fba836cc02]  Scott Griepentrog <sgriepentrog@digium.com>

	* sip_to_pjsip: improve ability to parse input files

	  General improvements to SIP to PJSIP conversion utility:

	  1) track default section of input file to allow parsing
	     an include file that doesn't specify a [section]

	  2) informatively handle case of assignment without [section]

	  3) correctly handle getting sections from included files
	     - [section]'s are inherited by included file

	  4) provide null string as default transport bind ip

	  5) gracefully handle missing portions of registration string

	  6) denote steps of operation during conversion and confirm
	     top level files as a convenience

	  ASTERISK-24474 #close
	  Review: https://reviewboard.asterisk.org/r/4280/
	  Reported by: John Kiniston
	  ........

	  Merged revisions 430469 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430470 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-09 15:45 +0000 [5b30938394]  Scott Griepentrog <sgriepentrog@digium.com>

	* app_bridge: return to the next dialplan priority

	  When app_bridge grabs a channel and puts it into
	  a bridge, the channel should then continue where
	  it left off in the dialplan after the bridge has
	  ended.   Although it stores the current dialplan
	  location as an after bridge goto on the channel,
	  it was executing the same priority again instead
	  of going to the next priority.   By swapping the
	  "specific" version of bridge_set_after_goto with
	  bridge_set_after_go_on, the next priority in the
	  dialplan is executed instead.

	  ASTERISK-24637 #close
	  Review: https://reviewboard.asterisk.org/r/4322/
	  Reported by: John Bigelow
	  ........

	  Merged revisions 430467 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430468 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-09 12:53 +0000 [ef34a05f21]  Richard Mudgett <rmudgett@digium.com>

	* AMI: Remove no longer used parameter from astman_send_listack().

	  Follow-up issue to -r430435 from reviewboard review.

	  ASTERISK-24049
	  Review: https://reviewboard.asterisk.org/r/4315/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430452 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-09 12:16 +0000 [52a7cdb101]  Richard Mudgett <rmudgett@digium.com>

	* AMI: Make AMI actions that generate event lists consistent.

	  * Made the following AMI actions use list API calls for consistency:
	  Agents
	  BridgeInfo
	  BridgeList
	  BridgeTechnologyList
	  ConfbridgeLIst
	  ConfbridgeLIstRooms
	  CoreShowChannels
	  DAHDIShowChannels
	  DBGet
	  DeviceStateList
	  ExtensionStateList
	  FAXSessions
	  Hangup
	  IAXpeerlist
	  IAXpeers
	  IAXregistry
	  MeetmeList
	  MeetmeListRooms
	  MWIGet
	  ParkedCalls
	  Parkinglots
	  PJSIPShowEndpoint
	  PJSIPShowEndpoints
	  PJSIPShowRegistrationsInbound
	  PJSIPShowRegistrationsOutbound
	  PJSIPShowResourceLists
	  PJSIPShowSubscriptionsInbound
	  PJSIPShowSubscriptionsOutbound
	  PresenceStateList
	  PRIShowSpans
	  QueueStatus
	  QueueSummary
	  ShowDialPlan
	  SIPpeers
	  SIPpeerstatus
	  SIPshowregistry
	  SKINNYdevices
	  SKINNYlines
	  Status
	  VoicemailUsersList

	  * Incremented the AMI version to 2.7.0.

	  * Changed astman_send_listack() to not use the listflag parameter and
	  always set the value to "Start" so the start capitalization is consistent.
	  i.e., The FAXSessions used "Start" while the rest of the system used
	  "start".  The corresponding complete event always used "Complete".

	  * Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
	  AMI ActionID for all of its list events.

	  * Fixed off-nominal AMI protocol error in manager_bridge_info(),
	  manager_parking_status_single_lot(), and
	  manager_parking_status_all_lots().  Use of astman_send_error() after
	  responding to the original AMI action request violates the action response
	  pattern by sending two responses.

	  * Fixed minor protocol error in action_getconfig() when no requested
	  categories are found.  Each line needs to be formatted as "Header: text".

	  * Fixed off-nominal memory leak in manager_build_parked_call_string().

	  * Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().

	  ASTERISK-24049 #close
	  Reported by: Jonathan Rose

	  Review: https://reviewboard.asterisk.org/r/4315/
	  ........

	  Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-09 08:53 +0000 [77ee23210d]  Kinsey Moore <kmoore@digium.com>

	* res_fax: Add T.38 negotiation timeout option

	  This change makes the T.38 negotiation timeout configurable via
	  't38timeout' in res_fax.conf or FAXOPT(t38timeout). It was previously
	  hard coded to be 5000 milliseconds.

	  This change also handles T.38 switch failures by aborting the fax since
	  in the case where this can happen, both sides have agreed to switch to
	  T.38 and Asterisk is unable to do so.

	  Review: https://reviewboard.asterisk.org/r/4320/
	  ........

	  Merged revisions 430415 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430416 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430417 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-08 15:41 +0000 [8786fe13a4]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_pubsub: Fix persistent subscriptions not surviving graceful shutdown

	  If you do a 'core (shutdown|restart) graceful' persistent subscriptions won't 
	  survive.  If you do a 'core (shutdown|restart) now' or asterisk terminates for 
	  some reason, they do.  Here's why...

	  When asterisk shuts down gracefully, it sends a 'NOTIFY/terminated' to 
	  subscribers for each subscription.  This not only tells the subscribers that the 
	  dialog/state machine is done, it also frees the last reference to the 
	  subscription tree which causes the persistent subscription to get deleted from 
	  astdb.  When asterisk restarts, nothing's left.  Just preventing the delete from 
	  astdb doesn't work because we already told the subscriber to terminate the 
	  dialog so we can't restart it even if it was still in astdb.  Everything works 
	  OK if asterisk terminates unexpectedly because we never send the 'terminated' 
	  message so on restart, the subscription is still in astdb and the subscriber is 
	  none the wiser.

	  This patch suppresses the sending of 'NOTIFY/terminated' on shutdown for 
	  persistent connections.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4318/
	  ........

	  Merged revisions 430397 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430398 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-08 15:38 +0000 [c55f86c69d]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_outbound_registration: Fix reference leak.

	  Every time a registration started, sip_outbound_registration_response_cb bumps 
	  the ref count on client_state then pushes a handle_registration_response task.  
	  handle_registration_response never unreffed it though.  So every time a 
	  registration goes out, the ref count goes up by one.

	  This patch adds the unreffs to handle_registration_response.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4303/
	  ........

	  Merged revisions 430395 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430396 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-08 11:51 +0000 [030facce94]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_outbound_registration: Fix several reload issues

	  There are 2 issues with reloading registrations...

	  1.  The 'can_reuse_registration' test wasn't considering the intervals or 
	  expiration in its determination of whether a registration changed or not so if 
	  you changed any of the intervals or the expiration and reloaded, the object 
	  would get reloaded but the actual timers wouldn't change.  
	  can_reuse_registration now does a sorcery diff on the old and new objects 
	  instead of discretely testing certain fields.  Now if you change expiration for 
	  instance, and reload, the timer is updated and re-registration will occur on the 
	  new value.

	  2.  If you mung up your password on an outbound registration you get a permanent 
	  failure.  If you fix the password (on the outbound_auth object) and reload, 
	  nothing tells outbound_registration to try again because the registration itself 
	  didn't change.  This patch adds an observer on the "auth" object type and if any 
	  auth changes, existing registration states are searched and those in a 
	  REJECTED_PERMANENT state are retried.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4304/
	  ........

	  Merged revisions 430373 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430374 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-07 15:26 +0000 [f8c4909eb7]  Kinsey Moore <kmoore@digium.com>

	* ARI: Allow usage of ASYNCGOTO with Stasis()

	  When the AMI Redirect action is used with a channel bridged inside
	  Stasis() and not running a pbx, the channel is hung up instead of
	  proceeding to the desired location in dialplan. This change allows
	  such channels to be Redirected properly by detecting the operation
	  used by Redirect (ASYNCGOTO) and using the code already established
	  for functionality of the ARI channel continue operation.

	  ASTERISK-24591 #close
	  Review: https://reviewboard.asterisk.org/r/4271/
	  ........

	  Merged revisions 430355 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430356 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-07 12:54 +0000 [7f836c1c15]  Mark Michelson <mmichelson@digium.com>

	* Add the ability to continue and originate using priority labels.

	  With this patch, the following two ARI commands

	  POST /channels
	  POST /channels/{id}/continue

	  Accept a new parameter, label, that can be used to continue to or originate
	  to a priority label in the dialplan.

	  Because this is adding a new parameter to ARI commands, the API version of
	  ARI has been bumped from 1.6.0 to 1.7.0.

	  This patch comes courtesy of Nir Simionovich from Greenfield Tech. Thanks!

	  ASTERISK-24412 #close
	  Reported by Nir Simionovich

	  Review: https://reviewboard.asterisk.org/r/4285
	  ........

	  Merged revisions 430337 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430338 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-07 12:17 +0000 [e83853eebc]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_exten_state: Change 'does not exist' warning to notice

	  The 'new_subscribe: Extension <> does not exist or has no associated hint'
	  is a config issue and doesn't need to clutter up logs with warnings.
	  Changed to notice.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4307/
	  ........

	  Merged revisions 430319 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430321 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-07 12:15 +0000 [8cde7443c2]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_mwi: Change "MWI Subscription failed" message from warning to notice

	  The "MWI Subscription failed" message means the client is trying to subscribe
	  to a mailbox that doesn't exist.  There's no need to clutter up logs with
	  warnings for a client misconfiguration so I changed it to a notice.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4306/
	  ........

	  Merged revisions 430317 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430318 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-07 11:54 +0000 [685f7ef924]  gtjoseph <george.joseph@fairview5.com>

	* func_config: Add ability to retrieve specific occurrence of a variable

	  I guess nobody uses templates with AST_CONFIG because today if you have a
	  context that inherits from a template and you call AST_CONFIG on the context,
	  you'll get the value from the template even if you've overridden it in the
	  context.  This is because AST_CONFIG only gets the first occurrence which is
	  always from the template.

	  This patch adds an optional 'index' parameter to AST_CONFIG which lets you
	  specify the exact occurrence to retrieve, or '-1' to retrieve the last.
	  The default behavior is the current behavior.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4313/
	  ........

	  Merged revisions 430315 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430316 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-07 11:45 +0000 [464647d8f8]  Mark Michelson <mmichelson@digium.com>

	* Fix ability to perform a remote attended transfer with PJSIP.

	  This fix has two parts:

	  * Corrected an error message to properly state that external_replaces is an extension. The
	    error message also prints what dialplan context the external_replaces extension was being
	    looked for in.
	  * Corrected the printing of the Replaces: header in an INVITE request. We were duplicating
	    "Replaces: " in the header.

	  ASTERISK-24376 #close
	  Reported by Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/4296
	  ........

	  Merged revisions 430313 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430314 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-07 10:56 +0000 [56de48107f]  gtjoseph <george.joseph@fairview5.com>

	* config: Add option to NOT preserve effective context when changing a template

	  Let's say you have a template T with variable VAR1 = ON and you have a
	  context C(T) that doesn't specify VAR1.  If you read C, the effective value
	  of VAR1 is ON.  Now you change T VAR1 to OFF and call
	  ast_config_text_file_save.  The current behavior is that the file gets
	  re-written with T/VAR1=OFF but C/VAR1=ON is added.  Personally, I think this
	  is a bug. It's preserving the effective state of C even though I didn't
	  specify C/VAR1 in th first place.  I believe the behavior should be that if
	  I didn't specify C/VAR1 originally, then the effective value of C/VAR1 should
	  continue to follow the inherited state.  Now, if I DID explicitly specify
	  C/VAR1, the it should be preserved even if the template changes.

	  Even though I think the existing behavior is a bug, it's been that way forever
	  so I'm not changing it.  Instead, I've created ast_config_text_file_save2()
	  that takes a bitmask of flags, one of which is to preserve the effective context
	  (the current behavior).  The original ast_config_text_file_save calls *2 with
	  the preserve flag.  If you want the new behavior, call *2 directly without a
	  flag.

	  I've also updated Manager UpdateConfig with a new parameter
	  'PreserveEffectiveContext' whose default is 'yes'.  If you want the new behavior
	  with UpdateConfig, set 'PreserveEffectiveContext: no'.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4297/
	  ........

	  Merged revisions 430295 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430296 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-06 21:01 +0000 [0c5234f12a]  Kinsey Moore <kmoore@digium.com>

	* Fix dev-mode build on recent gcc
	  ........

	  Merged revisions 430274 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430275 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-06 16:46 +0000 [220df246d9]  Matt Jordan <mjordan@digium.com>

	* Blocked revisions 430252

	  ........
	  contrib/ast-db-manage: Correct down_revision path for user_eq_phone

	  When the user_eq_phone patch was backported to 13, it referenced the downward
	  revision that the PJSIP optimistic encryption option also references. This
	  creates a multi-path upgrade Exception when generating the SQL files.

	  This patch corrects this in the 13 branch. Note that trunk, which already
	  contained both of these features, is unaffected by this problem.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430254 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-06 11:53 +0000 [8b5bde3e5a]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_mwi: Change warning to notice

	  When res_pjsip loads and an endpoint auto-subscribes a mailbox for mwi,
	  if a contact hasn't registered yet, res_pjsip_mwi spits out a warning.
	  This is a perfectly normal situation though and doesn't require something
	  as serious as a warning.  It's also self correcting. The device will start
	  getting mwi as soon as it registers.

	  This patch changes the warning to a notice.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4314/
	  ........

	  Merged revisions 430227 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430228 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-06 11:49 +0000 [5f60ebc004]  gtjoseph <george.joseph@fairview5.com>

	* bridge_native_rtp: Change local/remote message from debug/2 to verb/4

	  Change the "Locally bridged"/"Remotely bridged" messages from dbg/2 to verb/4.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4300/
	  ........

	  Merged revisions 430225 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430226 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-06 11:43 +0000 [fb3c8e3424]  gtjoseph <george.joseph@fairview5.com>

	* outbound_registration: Add 'pjsip send register' and update 'send unregister'

	  The current behavior of 'pjsip send unregister' is to send the unregister
	  (REGISTER with 0 exp) but let the next scheduled register proceed normally.
	  I don't think that's a good idea.  If you unregister, it should stay
	  unregistered until you decide to start registrations again.  So this patch
	  just adds a cancel_registration call to the current unregister_task to
	  cancel the timer.

	  Of course, now you need  a way to start registration again so I've added
	  a 'pjsip send register' command that unregisters and cancels any existing
	  registration (the same as send unregister), then sends an immediate
	  registration and starts the timer back up again.

	  Both changes also ripple to AMI.  There's a new PJSIPRegister command.

	  There's no harm in calling either command repeatedly.  They don't care
	  about the actual state.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4301/
	  ........

	  Merged revisions 430223 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430224 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-06 11:29 +0000 [7dc0c88fc6]  gtjoseph <george.joseph@fairview5.com>

	* pjsip cli: Fix sorting of contacts for 'pjsip list contacts'

	  For some reason I was using a hash container instead of a list to gather the
	  contacts for 'pjsip list/show contacts' so even though I had a sort function,
	  the output wasn't sorted.  This patch just changes the hash container to a
	  list container and the contacts now appear sorted in the CLI.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4305/
	  ........

	  Merged revisions 430221 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430222 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-05 16:50 +0000 [0b8fbf9238]  Scott Griepentrog <sgriepentrog@digium.com>

	* bridge: avoid leaking channel during blond transfer pt2

	  A blond transfer to a failed destination, when followed
	  by a recall attempt, lead to a leak of the reference to
	  the destination channel.  In addition to correcting the
	  regression on the previous attempt (r429826) this fixes
	  the leak and two additional reference leaks on failures
	  of bridge_import.

	  ASTERISK-24513 #close
	  Review: https://reviewboard.asterisk.org/r/4302/
	  ........

	  Merged revisions 430199 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 430200 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430201 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-05 11:57 +0000 [e0bd2ca104]  Joshua Colp <jcolp@digium.com>

	* pjsip: Document addition of 'PJSIP_AOR' and 'PJSIP_CONTACT' in CHANGES file.
	  ........

	  Merged revisions 430181 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430182 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2015-01-05 11:53 +0000 [f7cf988a82]  Joshua Colp <jcolp@digium.com>

	* pjsip: Add 'PJSIP_AOR' and 'PJSIP_CONTACT' dialplan functions.

	  The PJSIP_AOR dialplan function allows inspection of configured AORs including
	  what contacts are currently bound to them.

	  The PJSIP_CONTACT dialplan function allows inspection of contacts in existence.
	  These can include both externally added (by way of registration) or permanent
	  ones.

	  ASTERISK-24341
	  Reported by: xrobau

	  Review: https://reviewboard.asterisk.org/r/4308/
	  ........

	  Merged revisions 430179 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430180 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-31 12:54 +0000 [8d059c3808]  Scott Griepentrog <sgriepentrog@digium.com>

	* rtp_engine: keep payload types in correct range

	  In r428708 additional codecs were added including
	  a payload type of 128 which is outside of nominal
	  range of 0-127.  This change moves changes 128 to
	  96 to avoid causing a pjsip assertion when making
	  a call to an endpoint configured with allow=all.

	  ASTERISK-24367 #close
	  Review: https://reviewboard.asterisk.org/r/4286/



	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430164 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-29 07:14 +0000 [cb6a737359]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Update transport method documentation

	  This updates the documentation for the 'method' configuration option to
	  be more verbose about the behaviors of values 'unspecified' and
	  'default'. They do exactly the same thing which is to select the
	  default as defined by PJSIP which is currently TLSv1.

	  Review: https://reviewboard.asterisk.org/r/4264/
	  ........

	  Merged revisions 430145 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430146 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-24 15:28 +0000 [91becf952a]  Kevin Harwell <kharwell@digium.com>

	* app_queue: Update sample conf documenation

	  Updated the queues.conf.sample file to explicitly state which channel queue
	  variables are propagated to.

	  ASTERISK-24267
	  Reported by: Mitch Claborn
	  ........

	  Merged revisions 430126 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430127 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430128 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-24 10:59 +0000 [3a73c6c90e]  Matt Jordan <mjordan@digium.com>

	* main/pbx.c: Fix double lock of contexts lock introduced by r429967

	  We only need to hold the context_merge_lock once. Locking it twice will make
	  many other parts of Asterisk very sad.

	  ASTERISK-24641 #close


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430111 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-23 17:19 +0000 [7ea4156a5e]  gtjoseph <george.joseph@fairview5.com>

	* pjsip_options: Fix continued qualifies after endpoint/aor deletion

	  If you remove an endpoint/aor from pjsip.conf then do a core reload,
	  qualifies will continue even though the object are gone.  This happens
	  because nothing clears out the qualify tasks.

	  This patch unschedules all existing qualify tasks before scheduling
	  new ones on reload.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4290/
	  ........

	  Merged revisions 430064 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430067 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-23 17:16 +0000 [62d1dba271]  gtjoseph <george.joseph@fairview5.com>

	* test_astobj2: Fix warning for missing trailing slash in category

	  This patch adds a trailing slash to the category for this test.
	  No more warning.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4295/
	  ........

	  Merged revisions 430059 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430060 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-22 15:20 +0000 [1c0604e905]  Richard Mudgett <rmudgett@digium.com>

	* DTMF atxfer: Setup recall channels as if the transferee initiated the call.

	  After the initial DTMF atxfer call attempt to the transfer target fails to
	  answer during a blonde transfer, the recall callback channels do not get
	  setup with information from the initial transferrer channel.  As a result,
	  the recall callback to the transferrer does not have callid, channel
	  variables, datastores, accountcode, peeraccount, COLP, and CLID setup.  A
	  similar situation happens with the recall callback to the transfer target
	  but it is less visible.  The recall callback to the transfer target does
	  not have callid, channel variables, datastores, accountcode, peeraccount,
	  and COLP setup.

	  * Added missing information to the recall callback channels before
	  initiating the call.  callid, channel variables, datastores, accountcode,
	  peeraccount, COLP, and CLID

	  * Set callid of the transferrer channel on the DTMF atxfer controller
	  thread attended_transfer_monitor_thread().

	  * Added missing channel unlocks and props unref to off nominal paths in
	  attended_transfer_properties_alloc().

	  ASTERISK-23841 #close
	  Reported by: Richard Mudgett

	  Review: https://reviewboard.asterisk.org/r/4259/
	  ........

	  Merged revisions 430034 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430041 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-22 14:25 +0000 [7d954f4cb1]  Richard Mudgett <rmudgett@digium.com>

	* Fix compilation since the patch for ASTERISK-24363 went in.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430028 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-22 14:08 +0000 [bbd9ff122e]  Richard Mudgett <rmudgett@digium.com>

	* queue_log: Post QUEUESTART entry when Asterisk fully boots.

	  The QUEUESTART log entry has historically acted like a fully booted event
	  for the queue_log file.  When the QUEUESTART entry was posted to the log
	  was broken by the change made by ASTERISK-15863.

	  * Made post the QUEUESTART queue_log entry when Asterisk fully boots.
	  This restores the intent of that log entry and happens after realtime has
	  had a chance to load.

	  AST-1444 #close
	  Reported by: Denis Martinez

	  Review: https://reviewboard.asterisk.org/r/4282/
	  ........

	  Merged revisions 430009 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 430010 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430011 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-22 09:40 +0000 [264a50c52a]  Karsten Wemheuer (License 5930)

	* chan_sip: Send CANCEL via original INVITE destination even after UPDATE request

	  Given the following scenario:
	  * Three SIP phones (A, B, C), all communicating via a proxy with Asterisk
	  * A call is established between A and B. B performs a SIP attended transfer of
	    A to C. B sets the call on hold (A is hearing MOH) and dials the extension of
	    C. While phone C is ringing, B transfers the call (that is, what we typically
	    call a 'blond transfer').
	  * When the transfer completes, A hears the ringing of phone C, while B is idle.

	  In the SIP messaging for the above scenario, a REFER request is sent to
	  transfer the call. When "sendrpid=yes" is set in sip.conf, Asterisk may send an
	  UPDATE request to phone C to update party information. This update is sent
	  directly to phone C, not through the intervening proxy. This has the unfortunate
	  side effect of providing route information, which is then set on the sip_pvt
	  structure for C. If someone (e.g. B) is trying to get the call back (through a
	  directed pickup), Asterisk will send a CANCEL request to C. However, since we
	  have now updated the route set, the CANCEL request will be sent directly to C
	  and not through the proxy. The phone ignores this CANCEL according to RFC3261
	  (Section 9.1).

	  This patch updates reqprep such that the route is not updated if an UPDATE
	  request is being sent while the INVITE state is INV_PROCEEDING or
	  INV_EARLY_MEDIA. This ensures that a subsequent CANCEL request is still sent
	  to the correct location.

	  Review: https://reviewboard.asterisk.org/r/4279

	  ASTERISK-24628 #close
	  Reported by: Karsten Wemheuer
	  patches:
	    issue.patch uploaded by Karsten Wemheuer (License 5930)
	  ........

	  Merged revisions 429982 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429983 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429984 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-22 08:33 +0000 [0c38276d6e]  Gareth Palmer (License 5169)

	* presencestate: Allow channel drivers to provide presence state information

	  This patch adds the ability for channel drivers to supply presence information
	  in a similar manner to device state. The patch does not provide any channel
	  driver implementations, but it does provide the core infrastructure necessary
	  for channel drivers to provide such information.

	  The core handles multiple providers of presence state information. Ordering
	  of presence state is as follows:
	   INVALID < NOT_SET < AVAILABLE < UNAVAILABLE < CHAT < AWAY < XA < DND

	  Each provider can trump the previous if it provides a presence state that
	  supercedes a previous one.

	  Review: https://reviewboard.asterisk.org/r/4050

	  ASTERISK-24363 #close
	  Reported by: Gareth Palmer
	  patches:
	    chan_presencestate-428146.patch uploaded by Gareth Palmer (License 5169)


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429967 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-22 06:16 +0000 [2afeadcc84]  Matt Jordan <mjordan@digium.com>

	* app_confbridge: Fix build error caused by XML validation errors

	  Summaries can't contain XML nodes, as they are defined to contain only text
	  data.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429952 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-21 20:35 +0000 [b79a4a464f]  Gareth Palmer (License 5169)

	* app_confbridge: Add the ability to pass options/command to MixMonitor

	  This patch adds the ability to pass options and a command to MixMontor when
	  recording a conference using ConfBridge.

	  New options are -

	  * record_options: Options to MixMontor, eg: m(), W() etc.
	  * record_command: The command to execute when recording is over.
	  * record_file_timestamp: Append the start time to the file name.

	  These options can also be used with the CONFBRIDGE function, e.g.,
	  Set(CONFBRIDGE(bridge,record_command)=/path/to/command ^{MIXMONITOR_FILENAME}))

	  Review: https://reviewboard.asterisk.org/r/4023

	  ASTERISK-24351 #close
	  Reported by: Gareth Palmer
	  patches:
	    record_command-428838.patch uploaded by Gareth Palmer (License 5169)



	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429934 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-21 18:17 +0000 [b137a92aef]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_phoneprovi_provider: Fix reload

	  Reloading wasn't working correctly because on a reload, the sorcery apply
	  handler was never being called for unchanged users.  So, instead of using
	  an apply handler, I'm now iterating over all users.  Works much more reliably.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4288/
	  ........

	  Merged revisions 429914 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429915 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-20 14:57 +0000 [ba403e83bd]  Joshua Colp <jcolp@digium.com>

	* acl: Fix reloading of configuration if configuration file does not exist at startup.

	  The named ACL code incorrectly destroyed the config options information if loading
	  of the configuration file failed at startup. This would result in reloading
	  also failing even if a valid configuration file was put in place.

	  ASTERISK-23733 #close
	  Reported by: Richard Kenner
	  ........

	  Merged revisions 429893 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429894 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429895 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-19 14:56 +0000 [54bd1c9683]  Richard Mudgett <rmudgett@digium.com>

	* res_http_websocket.c: Fix incorrect use of sizeof in ast_websocket_write().

	  This won't fix the reported issue but it is an incorrect use of sizeof.

	  ASTERISK-24566
	  Reported by:  Badalian Vyacheslav
	  ........

	  Merged revisions 429867 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429868 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429870 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-19 11:34 +0000 [b508b3474e]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi: Don't ignore setvar when using configuration section scheme.

	  When the configuration section scheme of chan_dahdi.conf is used (keyword
	  dahdichan instead of channel) all setvar= options are completely ignored.
	  No variable defined this way appears in the created DAHDI channels.

	  * Move the clearing of setvar values to after the deferred processing of
	  dahdichan.

	  AST-1378 #close
	  Reported by: Guenther Kelleter
	  Patch by: Guenther Kelleter
	  ........

	  Merged revisions 429825 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429829 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429830 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-19 11:27 +0000 [07d1012383]  Scott Griepentrog <sgriepentrog@digium.com>

	* bridge: avoid leaking channel during blond transfer

	  After a blond transfer (start attended and hang up)
	  to a destination that also hangs up without answer,
	  the Local;1 channel was leaked and would show up on
	  core show channels.  This was happening because the
	  attended state blond_nonfinal_enter() resetting the
	  props->transfer_target to null while releasing it's
	  own reference, which would later prevent props from
	  releasing another reference during destruction. The
	  change made here is simply to not assign the target
	  to NULL.

	  ASTERISK-24513 #close
	  Reported by: Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/4262/
	  ........

	  Merged revisions 429826 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429827 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429828 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-18 16:40 +0000 [2cbfafa8c1]  Richard Mudgett <rmudgett@digium.com>

	* chan_dahdi.c, res_rtp_asterisk.c: Change some spammy debug messages to level 5.

	  ASTERISK-24337 #close
	  Reported by: Rusty Newton
	  ........

	  Merged revisions 429804 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429805 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429806 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-18 14:09 +0000 [eacbb4ceb5]  Richard Mudgett

	* chan_dahdi: Populate CALLERID(ani2) for incoming calls in featdmf signaling mode.

	  For the featdmf signaling mode the incoming MF Caller-ID information is
	  formatted as follows: *${CALLERID(ani2)}${CALLERID(ani)}#*${EXTEN}#

	  Rather than discarding the ani2 digits, populate the CALLERID(ani2) value
	  with what is received instead.

	  AST-1368 #close
	  Reported by: Denis Martinez
	  Patches:
	        extract_ani2_for_featdmf_v11.patch (license #5621) patch uploaded by Richard Mudgett
	  ........

	  Merged revisions 429783 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429784 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429785 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-18 09:55 +0000 [546a54574f]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_sdp_rtp: wrong bridge chosen when the DTMF mode is not compatible

	  A native rtp bridge was being chosen (it shouldn't have been) when using two
	  pjsip channels with incompatible DTMF modes.  This patch sets the rtp instance
	  property, AST_RTP_PROPERTY_DTMF, for the appropriate DTMF mode(s) for pjsip.
	  It was not being set before, meaning all DTMF modes for pjsip were being treated
	  as compatible, thus native bridging would be chosen as the bridge type when it
	  shouldn't have been.

	  ASTERISK-24459 #close
	  Reported by: Yaniv Simhi
	  Review: https://reviewboard.asterisk.org/r/4265/
	  ........

	  Merged revisions 429763 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429764 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-18 09:40 +0000 [2f3e5b494a]  Mark Michelson <mmichelson@digium.com>

	* Prevent potential infinite outbound authentication loops in registration.

	  Prior to this patch, Asterisk would always respond to 401 responses to
	  registration attempts by trying to provide a registration with authentication
	  credentials. Even if subsequent attempts were rejected with 401 responses,
	  Asterisk would continue this behavior. If authentication credentials were
	  incorrect, this could continue forever.

	  With this patch, we keep track of whether we have attempted authentication
	  on an outbound registration attempt. If we already have, we don not try
	  again until the next attempt. This prevents the infinite loop scenario.

	  Review: https://reviewboard.asterisk.org/r/4273
	  ........

	  Merged revisions 429761 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429762 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-18 09:18 +0000 [2b1f2b5c1f]  Mark Michelson <mmichelson@digium.com>

	* Prevent possible race condition on dual redirect of channels in the same bridge.

	  The AST_FLAG_BRIDGE_DUAL_REDIRECT_WAIT flag was created to prevent bridges from
	  prematurely acting on orphaned channels in bridges. The problem with the AMI
	  redirect action was that it was setting this flag on channels based on the presence
	  of a PBX, not whether the channel was in a bridge. Whether a channel has a PBX
	  is irrelevant, so the condition has been altered to check if the channel is in a
	  bridge.

	  ASTERISK-24536 #close
	  Reported by Niklas Larsson

	  Review: https://reviewboard.asterisk.org/r/4268
	  ........

	  Merged revisions 429741 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429745 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-18 08:50 +0000 [cc1405bd38]  Mark Michelson <mmichelson@digium.com>

	* Ensure the correct value is returned for CHANNEL(pjsip, secure)

	  Prior to this patch, we were using the PJSIP dialog's secure flag
	  to determine if a secure transport was being used. Unfortunately,
	  the dialog's secure flag was only set if a SIPS URI were in use,
	  as required by RFC 3261 sections 12.1.1 and 12.1.2. What we're interested
	  in is not dialog security, but transport security. This code change
	  switches to a model where we use the dialog's target URI to determine
	  what transport would be used to communicate, and then check if that
	  transport is secure.

	  AST-1450 #close
	  Reported by John Bigelow

	  Review: https://reviewboard.asterisk.org/r/4277
	  ........

	  Merged revisions 429739 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429740 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-17 18:11 +0000 [18b5a336ef]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_config_wizard: fix unload SEGV

	  If certain pjsip modules aren't loaded, the wizard causes a SEGV
	  when it unloads.  Added a check for the presense of the object
	  type wizard before trying to clean it up.

	  Tested-by: George Joseph
	  ........

	  Merged revisions 429719 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429720 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-17 17:06 +0000 [c4360796f7]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_config_wizard: Change FILEUNCHANGED config_load2 flag determination

	  The module now applies the FILEUNCHANGED flag when both reloaded is
	  specified AND there's no last_config for the object type.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4276/
	  ........

	  Merged revisions 429699 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429700 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-17 04:23 +0000 [8b6ecc449c]  Walter Doekes <walter+asterisk@wjd.nu>

	* Fix printf problems with high ascii characters after r413586 (1.8).

	  In r413586 (1.8) various casts were added to silence gcc 4.10 warnings.
	  Those fixes included things like:

	      -out += sprintf(out, "%%%02X", (unsigned char) *ptr);
	      +out += sprintf(out, "%%%02X", (unsigned) *ptr);

	  That works for low ascii characters, but for the high range that yields
	  e.g. FFFFFFC3 when C3 is expected.

	  This changeset:
	  - fixes those casts to use the 'hh' unsigned char modifier instead
	  - consistently uses %02x instead of %2.2x (or other non-standard usage)
	  - adds a few 'h' modifiers in various places
	  - fixes a 'replcaes' typo
	  - dev/urandon typo (in 13+ patch)

	  Review: https://reviewboard.asterisk.org/r/4263/

	  ASTERISK-24619 #close
	  Reported by: Stefan27 (on IRC)
	  ........

	  Merged revisions 429673 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429674 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429675 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429683 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-16 11:53 +0000 [c4cc668ba9]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_config_wizard: fix test breakage

	  Fix test breakage caused by not checking for res_pjsip before
	  calling ast_sip_get_sorcery.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4269/
	  ........

	  Merged revisions 429653 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429654 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-16 10:39 +0000 [58095d2486]  Andreas Steinmetz (license 6523)

	* chan_sip: Allow T.38 switch-over when SRTP is in use.

	  Previously when SRTP was enabled on a channel it was not possible
	  to switch to T.38 as no crypto attributes would be present.

	  This change makes it so it is now possible. If a T.38 re-invite
	  comes in SRTP is terminated since in practice you can't encrypt
	  a UDPTL stream. Now... if we were doing T.38 over RTP (which
	  does exist) then we'd have a chance but almost nobody does that so
	  here we are.

	  ASTERISK-24449 #close
	  Reported by: Andreas Steinmetz
	  patches:
	   udptl-ignore-srtp-v2.patch submitted by Andreas Steinmetz (license 6523)
	  ........

	  Merged revisions 429632 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429633 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429634 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-16 09:44 +0000 [b5182a6795]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_t38: Fix T.38 failure when peer reinvites immediately.

	  If a remote endpoint reinvites to T.38 immediately the state machine
	  will go into a peer reinvite state. If a T.38 capable application
	  (such as ReceiveFax) queries it will receive this state. Normally
	  the application will then indicate so that the channel driver will
	  queue up the T.38 offer previously received. Once it receives this
	  offer the application will act normally and negotiate.

	  The res_pjsip_t38 module incorrectly partially squashed this indication.
	  This would cause the application to think the request had failed when
	  in reality it had actually worked.

	  This change makes it so that no T.38 control frames (or indications)
	  are squashed.
	  ........

	  Merged revisions 429612 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429613 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-15 11:08 +0000 [39b54a21dc]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_config_wizard: Allow streamlined config of common pjsip scenarios

	  res_pjsip_config_wizard
	  ------------------
	   * This is a new module that adds streamlined configuration capability for
	     chan_pjsip.  It's targetted at users who have lots of basic configuration
	     scenarios like 'phone' or 'agent' or 'trunk'.  Additional information
	     can be found in the sample configuration file at
	     config/samples/pjsip_wizard.conf.sample.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4190/
	  ........

	  Merged revisions 429592 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429593 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-15 09:48 +0000 [53e5b377a0]  Mark Michelson <mmichelson@digium.com>

	* Activate persistent subscriptions when they are recreated.

	  Prior to this change, recreating persistent subscriptions would
	  create the subscription but would not activate it. This led to subscriptions
	  being listed in the "NULL" state by diagnostics and not sending NOTIFYs
	  when expected.

	  Review: https://reviewboard.asterisk.org/r/4261
	  ........

	  Merged revisions 429571 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429573 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 17:57 +0000 [6472568bc6]  gtjoseph <george.joseph@fairview5.com>

	* loader: Move definition of ast_module_reload from _private.h to module.h

	  No functionality change.  Just move the definition of ast_module_reload
	  from _private.h to module.h so it can be public.

	  Also removed the include of _private.h from manager.c since ast_module_load
	  was the only reason for including it.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4251/
	  ........

	  Merged revisions 429542 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429543 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 17:49 +0000 [308c1b41dd]  Richard Mudgett <rmudgett@digium.com>

	* DEBUG_THREADS: Fix regression and lock tracking initialization problems.

	  This patch started with David Lee's patch at
	  https://reviewboard.asterisk.org/r/2826/ and includes a regression fix
	  introduced by the ASTERISK-22455 patch.

	  The initialization of a mutex's lock tracking structure was not protected
	  in a critical section.  This is fine for any mutex that is explicitly
	  initialized, but a static mutex may have its lock tracking double
	  initialized if multiple threads attempt the first lock simultaneously.

	  * Added a global mutex to properly serialize initialization of the lock
	  tracking structure.  The painful global lock can be mitigated by adding a
	  double checked lock flag as discussed on the original review request.

	  * Defer lock tracking initialization until first use.

	  * Don't be "helpful" and initialize an uninitialized lock when
	  DEBUG_THREADS is enabled.  Debug code is not supposed to fix or change
	  normal code behavior.  We don't need a lock initialization race that would
	  force a re-setup of lock tracking.  Lock tracking already handles
	  initialization on first use.

	  * Properly handle allocation failures of the lock tracking structure.

	  * No need to initialize tracking data in __ast_pthread_mutex_destroy()
	  just to turn around and destroy it.


	  The regression introduced by ASTERISK-22455 is the result of manipulating
	  a pthread_mutex_t struct outside of the pthread library code.  The
	  pthread_mutex_t struct seems to have a global linked list pointer member
	  that can get changed by other threads.  Therefore, saving and restoring
	  the contents of a pthread_mutex_t struct is a bad thing.

	  Thanks to Thomas Airmont for finding this obscure regression.

	  * Don't overwrite the struct ast_lock_track.reentr_mutex member to restore
	  tracking data in __ast_cond_wait() and __ast_cond_timedwait().  The
	  pthread_mutex_t struct must be treated as a read-only opaque variable.


	  Miscellaneous other items fixed by this patch:

	  * Match ast_suspend_lock_info() with ast_restore_lock_info() in
	  __ast_cond_timedwait().

	  * Made some uninitialized lock sanity checks return EINVAL and try a
	  DO_THREAD_CRASH.

	  * Fix bad canlog initialization expressions.

	  ASTERISK-24614 #close
	  Reported by: Thomas Airmont

	  Review: https://reviewboard.asterisk.org/r/4247/
	  Review: https://reviewboard.asterisk.org/r/2826/
	  ........

	  Merged revisions 429539 from http://svn.asterisk.org/svn/asterisk/branches/11


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429541 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 16:54 +0000 [901221ffae]  Matt Jordan <mjordan@digium.com>

	* res/res_agi: Make Verbose message for 'stream file' match other playbacks

	  The Verbose message displayed when a file is played back via 'stream file'
	  was formatted differently than other playbacks:
	  * It didn't include the channel name
	  * It didn't include the channel language
	  It does, however, include the playback offset as well as any escape digits.
	  That information was kept; however, this patch updates the formatting to more
	  closely match the Verbose messages displayed when a file is played back by
	  'control stream file', Playback, ControlPlayback, or any other file playback
	  operation.
	  ........

	  Merged revisions 429519 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429520 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 11:01 +0000 [8d325be503]  Joshua Colp <jcolp@digium.com>

	* media: Fix crash when determining sample count of a frame during shutdown.

	  When shutting down Asterisk the codecs are cleaned up. As a result anything
	  attempting to get a codec based on ID or details will find that no codec
	  exists. This currently occurs when determining the sample count of a frame.
	  This code did not take this situation into account.

	  This change fixes this by getting the codec directly from the format and
	  eliminates the lookup. This is both faster and also provides a guarantee
	  that the codec will exist and will be valid.

	  ASTERISK-24604 #close
	  Reported by: Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/4260/
	  ........

	  Merged revisions 429497 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429498 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 09:31 +0000 [72499dc697]  Kevin Harwell <kharwell@digium.com>

	* chan_pjsip: Race between channel answer and bridge setup when using direct media

	  When direct media is enabled and a pjsip channel is answered a race would occur
	  between the handling of the answer and bridge setup. Sometimes the media
	  negotiation would take place after the native bridge was setup. This resulted
	  in a NULL media address, which in turn resulted in Asterisk using its address
	  as the remote media address when sending a reinvite.  This patch makes the
	  chan_pjsip answer handler synchronous thus alleviating the race condition (the
	  bridge won't start setting things up until after it returns).

	  ASTERISK-24563 #close
	  Reported by: Steve Pitts
	  Review: https://reviewboard.asterisk.org/r/4257/
	  ........

	  Merged revisions 429477 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429478 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 09:03 +0000 [2e6d2b1484]  David M. Lee <dlee@digium.com>

	* Fix crash for sorcery misconfigs

	  res_pjsip_outbound_publish was missing the CHECK_PJSIP_MODULE_LOADED()
	  call in load_module, and would crash with a segfault if res_pjsip
	  declined to load.

	  Review: https://reviewboard.asterisk.org/r/4258/
	  ........

	  Merged revisions 429457 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429458 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 08:12 +0000 [a6cf13f2e9]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Allow use of 'inactive' streams for hold

	  This allows use of the 'inactive' stream direction identifier to be
	  used for hold where 'sendonly' is normally used. Some Seimens phones
	  use 'inactive' and this change allows music on hold to operate
	  properly.

	  Review: https://reviewboard.asterisk.org/r/4252/
	  Reported by: Steve Pitts
	  ........

	  Merged revisions 429432 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429433 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429434 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 08:04 +0000 [b99770d4fe]  Kinsey Moore <kmoore@digium.com>

	* Sorcery: Log when old config remains in use

	  This adds a log message notifying the user that a stale configuration
	  is in place upon reload when a config object fails to load. This
	  situation can end up causing confusion when the object failed to load
	  but exists from a previous config load especially when the old config
	  is significantly different from the new config.

	  Review: https://reviewboard.asterisk.org/r/4250/
	  Reported by: Thomas Thompson
	  ........

	  Merged revisions 429429 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429430 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429431 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 07:06 +0000 [74d43977cf]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Delay sending BYE if a re-INVITE transaction is in progress.

	  Given the scenario where a PJSIP channel is in a native RTP bridge with direct
	  media and the channel is then hung up the code will currently re-INVITE the channel
	  back to Asterisk and send a BYE at the same time. Many SIP implementations dislike
	  this greatly.

	  This change makes it so that if a re-INVITE transaction is in progress the BYE
	  is queued to occur after the completion of the transaction (be it through normal
	  means or a timeout).

	  Review: https://reviewboard.asterisk.org/r/4248/
	  ........

	  Merged revisions 429409 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429410 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-12 06:32 +0000 [8d384f3825]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Fix issue where a declined media stream in a re-INVITE would fail SDP negotiation.

	  In the past the SDP negotiation within res_pjsip_session was made more tolerant of
	  certain situations. The only case where SDP negotiation will fail is when a major
	  error occurs during negotiation. Receiving an already declined media stream is
	  not considered a major error.

	  When producing the local SDP the logic took this into account so on the initial INVITE
	  the declined media stream did not cause an SDP negotiation failure. Unfortunately
	  the logic for handling media streams with a handler did not mirror this logic and
	  considered an already declined media stream an error and thus failed the SDP
	  negotiation.

	  This change makes the logic between both situations match so only under major
	  errors will the SDP negotiation fail.

	  ASTERISK-24607 #close
	  Reported by: Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/4254/
	  ........

	  Merged revisions 429407 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429408 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-11 14:32 +0000 [63d3f0af95]  Kevin Harwell <kharwell@digium.com>

	* ARI/AMI: Include language in standard channel snapshot output

	  The CHANGES verbiage for the "language" addition had been put under the wrong
	  release. This moves it to be under 13.1 to 13.2 changes.

	  ASTERISK-24553
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 429387 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429388 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-11 07:53 +0000 [d64b9904fd]  Kinsey Moore <kmoore@digium.com>

	* Stasis: Update unittest for channel snapshots

	  This adjusts the unit test for channel snapshots to take the new
	  language key into account.
	  ........

	  Merged revisions 429352 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429353 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-10 09:43 +0000 [e890f9f653]  Kevin Harwell <kharwell@digium.com>

	* ARI/AMI: Include language in standard channel snapshot output

	  Adding information about including "language" in the standard channel snapshot
	  output to the CHANGES file. Note the actual source changes have already been
	  previously committed.

	  ASTERISK-24553
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 429325 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429326 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429327 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-10 07:35 +0000 [03c94ef761]  Joshua Colp <jcolp@digium.com>

	* res_http_websocket: Fix crash due to double freeing memory when receiving a payload length of zero.

	  Frames with a payload length of 0 were incorrectly handled in res_http_websocket.
	  Provided a frame with a payload had been received prior it was possible for a double
	  free to occur. The realloc operation would succeed (thus freeing the payload) but be
	  treated as an error. When the session was then torn down the payload would be
	  freed again causing a crash. The read function now takes this into account.

	  This change also fixes assumptions made by users of res_http_websocket. There is no
	  guarantee that a frame received from it will be NULL terminated.

	  ASTERISK-24472 #close
	  Reported by: Badalian Vyacheslav

	  Review: https://reviewboard.asterisk.org/r/4220/
	  Review: https://reviewboard.asterisk.org/r/4219/
	  ........

	  Merged revisions 429270 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429272 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429273 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429274 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-10 07:16 +0000 [0cba439c4d]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Fix assert on initial mass qualify

	  This fixes the MWI test regressions caused by r429127 and ensures that
	  contacts have non-zero qualify_frequency before attempting scheduling.
	  ........

	  Merged revisions 429245 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429246 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429247 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-09 14:47 +0000 [8fe45f0f0a]  Scott Griepentrog <sgriepentrog@digium.com>

	* core: avoid possible asterisk -r crash from long id

	  When connecting to the remote console, an id string
	  is first provided that consts of the hostname, pid,
	  and version.  This is parsed by the remote instance
	  using a buffer that may be too short, and can allow
	  a buffer overrun because it is not terminated. This
	  patch adds termination and a larger buffer.

	  Review: https://reviewboard.asterisk.org/r/4182/
	  ........

	  Merged revisions 429223 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429224 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-09 14:20 +0000 [d673209abc]  Kevin Harwell <kharwell@digium.com>

	* ARI/AMI: Include language in standard channel snapshot output

	  The channel "language" was already part of a channel snapshot, however is was
	  not sent out over AMI or ARI. This patch makes it so the channel "language" is
	  included in the appropriate AMI or ARI events.

	  ASTERISK-24553 #close
	  Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/4245/
	  ........

	  Merged revisions 429204 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429206 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429209 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-09 14:03 +0000 [c17cef1c38]  Kevin Harwell <kharwell@digium.com>

	* Direct Media calls within private network sometimes get one way audio

	  When endpoints with direct_media enabled, behind a firewall (Asterisk on a
	  separate network) and were bridged sometimes Asterisk would send the ip
	  address of the firewall in the sdp to one of the phones in the reinvite
	  resulting in one way audio. When sending the reinvite Asterisk will retrieve
	  the media address from the associated rtp instance, but if frames were being
	  read this can be overwritten with another address (in this case the
	  firewall's).  This patch ensures that Asterisk uses the original device
	  address when using direct media.

	  ASTERISK-24563
	  Reported by: Steve Pitts
	  Review: https://reviewboard.asterisk.org/r/4216/
	  ........

	  Merged revisions 429195 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429196 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429197 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-09 12:36 +0000 [7844266e21]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_outbound_publish: stack overflow when using non-default sorcery wizard

	  When using a non-default sorcery wizard (in this instance realtime) for outbound
	  publishes Asterisk will crash after a stack overflow occurs due to the code
	  infinitely recursing.  The fix entails removing the outbound publish state
	  dependency from the outbound publish sorcery object and instead keeping an in
	  memory container that can be used to lookup the state when needed.

	  ASTERISK-24514 #close
	  Reported by: Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/4178/
	  ........

	  Merged revisions 429175 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429176 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-09 09:45 +0000 [60ab564ad2]  Joshua Colp <jcolp@digium.com>

	* ari: Add support for specifying an originator channel when originating.

	  If an originator channel is specified when originating a channel the linked ID
	  of it will be applied to the newly originated outgoing channel. This allows
	  an association to be made between the two so it is known that the originator
	  has dialed the originated channel.

	  ASTERISK-24552 #close
	  Reported by: Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/4243/
	  ........

	  Merged revisions 429153 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429154 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-09 08:01 +0000 [b6e18cae5c]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Stagger outbound qualifies

	  This change staggers initiation of outbound qualify (OPTIONS) attempts
	  to reduce instantaneous server load and prevent network congestion.

	  Review: https://reviewboard.asterisk.org/r/4246/
	  ASTERISK-24342 #close
	  Reported by: Richard Mudgett
	  ........

	  Merged revisions 429127 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429128 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429129 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-08 10:54 +0000 [fe6cbf455a]  Matt Jordan <mjordan@digium.com>

	* AMI/ARI: Update version to 2.6.0/1.6.0 respectively for new features

	  AMI/ARI are getting a few enhancements in the next release of Asterisk 13. Per
	  semantic versioning, that warrants a bump in the minor version number, as it
	  reflects a backwards compatible change. Hence, this commit.
	  ........

	  Merged revisions 429091 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429092 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-08 10:43 +0000 [bba1763f47]  Mark Michelson <mmichelson@digium.com>

	* Fix a crash that would occur when receiving a 491 response to a reinvite.

	  The reviewboard description does a fine job of summarizing this, so here it is:

	  A reporter discovered that Asterisk would crash when attempting to retransmit
	  a reinvite that had previously received a 491 response. The crash occurred
	  because a pjsip_tx_data structure was being saved for reuse, but its reference
	  count was not being increased. The result was that the pjsip_tx_data was being
	  freed before we were actually done with it. When we attempted to re-use the
	  structure when re-sending the reinvite, Asterisk would crash.

	  The fix implemented here is not to try holding onto the pjsip_tx_data at all.
	  Instead, when we reschedule sending the reinvite, we create a brand new
	  pjsip_tx_data and send that instead. Because of this change, there is no need
	  for an ast_sip_session_delayed_request structure to have a pjsip_tx_data on
	  it any more. So any code referencing its use has been removed.

	  When this initial fix was introduced, I encountered a second crash when
	  processing a subsequent 200 OK on a rescheduled reinvite. The reason was
	  that when rescheduling the reinvite, we gave the wrong location for a
	  response callback. This has been fixed in this patch as well.

	  ASTERISK-24556 #close
	  Reported by Abhay Gupta

	  Review: https://reviewboard.asterisk.org/r/4233
	  ........

	  Merged revisions 429089 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429090 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-08 10:24 +0000 [fe7671fee6]  Mark Michelson <mmichelson@digium.com>

	* Add new AMI and ARI events for connected line changes on a channel.

	  The AMI event is called NewConnectedLine and the ARI event is called
	  ChannelConnectedLine.

	  ASTERISK-24554 #close
	  Reported by Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/4231
	  ........

	  Merged revisions 429064 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429084 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-08 09:45 +0000 [4bb556a847]  Kinsey Moore <kmoore@digium.com>

	* Stasis: Fix StasisStart/End order and missing events

	  This corrects several bugs that currently exist in the stasis
	  application code.

	  * After a masquerade, the resulting channels have channel topics that
	    do not match their uniqueids
	  ** Masquerades now swap channel topics appropriately
	  * StasisStart and StasisEnd messages are leaked to observer
	    applications due to being published on channel topics
	  ** StasisStart and StasisEnd publishing is now properly restricted
	     to controlling apps via app topics
	  * Race conditions exist where StasisStart and StasisEnd messages due to
	    a masquerade may be received out of order due to being published on
	    different topics
	  ** These messages are now published directly on the app topic so this
	     is now a non-issue
	  * StasisEnds are sometimes missing when sent due to masquerades and
	    bridge swaps into and out of Stasis()
	  ** This was due to StasisEnd processing adjusting message-sent flags
	     after Stasis() had already exited and Stasis() had been re-entered
	  ** This was corrected by adjusting these flags prior to sending the
	     message while the initial Stasis() application was still shutting
	     down

	  Review: https://reviewboard.asterisk.org/r/4213/
	  ASTERISK-24537 #close
	  Reported by: Matt DiMeo
	  ........

	  Merged revisions 429061 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429062 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429063 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-06 12:16 +0000 [49aa87e17c]  Nuno Borges (License 6116)

	* res/res_monitor: Reset in/out sample counts on Monitor start

	  When repeatedly starting/stopping a Monitor on a channel, the accumulated
	  in/out sample counts are never reset to 0. This can cause inadvertent jumps
	  in the recordings, as the code in the channel core will determine incorrectly
	  that a jump in the recorded file position should occur. Setting the sample
	  counts to 0 simply reflects the initial state a Monitor should be in when it
	  is started, as this is the initial count that would be on the channels at that
	  time.

	  ASTERISK-24573 #close
	  Reported by: Nuno Borges
	  patches:
	    24573.patch uploaded by Nuno Borges (License 6116)
	  ........

	  Merged revisions 429031 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429032 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429033 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429034 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-06 11:36 +0000 [0cdb71aae9]  Nuno Borges (License 6116)

	* apps/app_meetme: Apply default values on initial load with no config file

	  When the app_meetme module is loaded without its configuration file, the
	  module settings aren't initialized. In particular, this impacts the use
	  of logging realtime members. This patch guarantees that we always set the
	  default module settings on initial load.

	  Review: https://reviewboard.asterisk.org/r/4242/

	  ASTERISK-24572 #close
	  Reported by: Nuno Borges
	  patches:
	    24572.patch uploaded by Nuno Borges (License 6116)
	  ........

	  Merged revisions 429027 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 429028 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429029 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429030 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-05 11:08 +0000 [d04445c24a]  gtjoseph <george.joseph@fairview5.com>

	* sorcery: Add additional observer capabilities.

	  Add new global, instance and wizard observers.
	  instance_created
	  wizard_registered
	  wizard_unregistered
	  instance_destroying
	  instance_loading
	  instance_loaded
	  wizard_mapped
	  object_type_registered
	  object_type_loading
	  object_type_loaded
	  wizard_loading
	  wizard_loaded

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4215/
	  ........

	  Merged revisions 428999 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 429000 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429001 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-04 11:13 +0000 [19992844be]  Matt Jordan <mjordan@digium.com>

	* main/test: Fix compilation issue on 32-bit systems

	  On a 32-bit system, a type of intmax_t will result in a compilation warning
	  when formatted as a 'long int'. Use the format specifier of %jd (which was
	  what was used originally in manager.c) to format the JSON extracted integer
	  on both 32-/64-bit systems.
	  ........

	  Merged revisions 428972 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428973 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428974 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-04 09:48 +0000 [343a83d7d8]  Matt Jordan <mjordan@digium.com>

	* main/test: Fix race condition between AMI topic and Test Suite topic

	  This patch fixes a race condition between the raising of test AMI events (which
	  drive many tests in the Asterisk Test Suite) and other AMI events. Prior to
	  this patch, the Stasis messages published to the test topic were not forwarded
	  to the AMI topic. Instead, the code in manager had a dedicated handler for test
	  messages that was independent of the topics forwarded to the AMI topic. This
	  results in no synchronization between the test messages and the rest of the
	  Stasis messages published out over AMI. In some test with very tight timing
	  constraints, this can result in out of order messages and spurious test
	  failures. Properly forwarding the Test Suite topic to the AMI topic ensures
	  that the messages are synchronized properly.

	  This patch does that, and moves the message handling to the Stasis definition
	  of the Test Suite message in test.c as well.

	  Review: https://reviewboard.asterisk.org/r/4221/
	  ........

	  Merged revisions 428945 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428946 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428947 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-03 14:59 +0000 [7cb2c446b4]  Matt Jordan <mjordan@digium.com>

	* tests/test_cel: Add test_cel_attended_transfer_bridges_link to racey tests

	  Despite failing less often, the ordering of the ATTENDEDTRANSFER event and the
	  BRIDGE_EXIT event for the Alice and David channels is not defined. This makes
	  the test still fail.
	  ........

	  Merged revisions 428918 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428919 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428920 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-03 13:49 +0000 [7475e1c948]  Matt Jordan <mjordan@digium.com>

	* tests/test_cel: Fix CEL unit test failures caused by attended transfer changes

	  When the publication of attended transfer messages were pushed to another
	  thread, some subtle race conditions were introduced with the CEL unit tests.
	  This patch fixes one of them, and pushes the other to ASTERISK-22367, which
	  already exists to fix another bouncy CEL unit test.

	  In particular, this patch fixes the test_cel_attended_transfer_bridges_link
	  test, and defers the test_cel_attended_transfer_bridges_swap test to the
	  aforementioned JIRA issue.

	  ASTERISK-22367
	  ........

	  Merged revisions 428891 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428892 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428893 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-03 10:45 +0000 [6d4ef7ddf4]  David Duncan Ross Palmer (License 6660)

	* apps/app_voicemail: Fix crash with IMAP when streams are opened simultaneously

	  The UW IMAP library is instrinsically not thread-safe, and relies upon higher
	  level applications to guarantee thread safety. For the most part, this is
	  provided by the vms object, which provides locking for individual streams.
	  Unfortunately, this is not sufficient for calls to mail_open which create the
	  IMAP stream. mail_open can, on some systems, call into a UW IMAP specific
	  function for determining the address of a system based on a hostname,
	  ip_nametoaddr.

	  In the ip6_unix implementation of this function, static variables are used
	  to hold parsing buffers. This can cause a crash if multiple threads attempt
	  to convert a hostname to an address at the same time. Locking on a single
	  mail stream is not sufficient to prevent simultaneous access to these static
	  variables.

	  In the IMAP library, this function can be called from the mail_open and
	  imap_status functions. As the imap_status function is not used by
	  app_voicemail, locking on access to mail_open is sufficient to prevent
	  any mangling of the buffers.

	  Review: https://reviewboard.asterisk.org/r/4188/

	  ASTERISK-24516 #close
	  Reported by: David Duncan Ross Palmer
	  Tested by: David Duncan Ross Palmer
	  patches:
	    ASTERISK-24516.diff uploaded by David Duncan Ross Palmer (License 6660)
	  ........

	  Merged revisions 428863 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428864 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428865 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428866 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-02 15:54 +0000 [63cbd28999]  gtjoseph <george.joseph@fairview5.com>

	* CHANGES: Add item for new 'pjsip show identif(y|ies) commands

	  Tested-by: George Joseph
	  ........

	  Merged revisions 428836 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428837 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428838 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-02 13:04 +0000 [dd00e80cbe]  Matt Jordan <mjordan@digium.com>

	* tests/test_stasis: Resolve compilation issues from Asterisk 12 merge

	  When merging the changes up stream in r428687, I missed the fact that the
	  signature for stasis_message_type_create was changed. This patch fixes
	  the compilation issues introduced by that merge.
	  ........

	  Merged revisions 428815 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428816 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-02 11:10 +0000 [08636aadec]  Birger Harzenetter (License 5870)

	* pbx/pbx_loopback: Speed up switches by avoiding unneeded lookups

	  This patch makes a small rearrangement to only do dialplan lookups during
	  loopback switches if the pattern matches. Prior to this patch, the dialplan
	  lookups were always performed, even when the result would be discarded.
	  Dialplan lookups can be very costly if remote switches - like DUNDi - are
	  present. In those cases extension matching is sped up considerably, making
	  the issue of lost digits more manageable.

	  As collateral damage, 6 trailing spaces were killed.

	  Review: https://reviewboard.asterisk.org/r/4211

	  ASTERISK-24577 #close
	  Reported by: Birger Harzenetter
	  patches:
	    ast-loopback.patch uploaded by Birger Harzenetter (License 5870)
	  ........

	  Merged revisions 428787 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428788 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428789 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428790 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-02 06:21 +0000 [0c1aaa7da5]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_refer: Fix issue where native bridge may not occur upon completion of a transfer.

	  There are two methods within res_pjsip_refer for keeping track of the state of a transfer.
	  The first is a framehook which looks at frames passing by to determine the state. The second
	  subscribes to know when the channel joins a bridge. In the case when the channel joins the
	  bridge the framehook is *NOT* removed and this prevents the native RTP bridging technology
	  from getting used.

	  This change gets the channel and if it still exists remove the framehook.

	  Review: https://reviewboard.asterisk.org/r/4218/
	  ........

	  Merged revisions 428760 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428761 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428762 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-01 18:38 +0000 [f128ff61ab]  gtjoseph <george.joseph@fairview5.com>

	* config: Create ast_variable_find_in_list()

	  Add
	  const char *ast_variable_find_in_list(const struct ast_variable *list,
	     const char *variable);

	  ast_variable_find() requires a config category to search whereas
	  ast_variable_find_in_list() just needs the root list element which is
	  useful if you don't have a category.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4217/
	  ........

	  Merged revisions 428733 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428734 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428735 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-01 18:31 +0000 [f418f25c44]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_endpoint_identifier_ip: Add 'show identify(ies)' cli commands

	  While troubleshooting other things I realized there were no pjsip cli
	  commands for identify.  This patch adds them.  It also also fixes a
	  reference leak when a 'show endpoint' displayed identifies and properly
	  sets the return code if load_module can't allocate a cli formatter structure.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4212/
	  ........

	  Merged revisions 428725 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428731 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428732 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-01 12:51 +0000 [4ff6bd831f]  Joshua Colp <jcolp@digium.com>

	* rtp_engine: Add support for transporting signed linear at 12kHz, 24kHz, 32kHz, 44kHz, 48kHz, 96kHz, and 192kHz over RTP.

	  This change adds mappings in the RTP engine layer for the remaining signed linear formats.

	  ASTERISK-24274 #close
	  Reported by: Frankie Chin

	  Review: https://reviewboard.asterisk.org/r/4093/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428708 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-01 11:59 +0000 [1106e8fd0f]  Matt Jordan <mjordan@digium.com>

	* main/stasis: Allow subscriptions to use a threadpool for message delivery

	  Prior to this patch, all Stasis subscriptions would receive a dedicated
	  thread for servicing published messages. In contrast, prior to r400178
	  (see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
	  shared a thread pool. It was discovered during some initial work on Stasis
	  that, for a low subscription count with high message throughput, the
	  threadpool was not as performant as simply having a dedicated thread per
	  subscriber.

	  For situations where a subscriber receives a substantial number of messages
	  and is always present, the model of having a dedicated thread per subscriber
	  makes sense. While we still have plenty of subscriptions that would follow
	  this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
	  the following two categories:
	  * Large number of subscriptions, specifically those tied to endpoints/peers.
	  * Low number of messages. Some subscriptions exist specifically to coordinate
	    a single message - the subscription is created, a message is published, the
	    delivery is synchronized, and the subscription is destroyed.
	  In both of the latter two cases, creating a dedicated thread is wasteful (and
	  in the case of a large number of peers/endpoints, harmful). In those cases,
	  having shared delivery threads is far more performant.

	  This patch adds the ability of a subscriber to Stasis to choose whether or not
	  their messages are dispatched on a dedicated thread or on a threadpool. The
	  threadpool is configurable through stasis.conf.

	  Review: https://reviewboard.asterisk.org/r/4193

	  ASTERISK-24533 #close
	  Reported by: xrobau
	  Tested by: xrobau
	  ........

	  Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-01 07:41 +0000 [ef9ca8bc32]  Ben Smithurst (license 6529)

	* app_record: Fix bug where using the 'k' option and hanging up would trim 1/4 of a second of the recording.

	  The Record dialplan function trims 1/4 of a second from the end of recordings in case
	  they are terminated because of DTMF. When hanging up, however, you don't want this to happen.
	  This change makes it so on hangup this does not occur.

	  ASTERISK-24530 #close
	  Reported by: Ben Smithurst
	  patches:
	   app_record_v2.diff submitted by Ben Smithurst (license 6529)

	  Review: https://reviewboard.asterisk.org/r/4201/
	  ........

	  Merged revisions 428653 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428654 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428655 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428656 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-12-01 07:08 +0000 [7db3d1642b]  snuffy <snuffy22@gmail.com> (license 5024)

	* channel: Extend size of buffer for codecs in "core show channeltype" CLI command.

	  The static buffer for codecs when invoking the "core show channeltype" CLI command
	  did not have enough room for all codecs. This has been extended so it does.

	  ASTERISK-24542 #close
	  Reported by: snuffy
	  patches:
	   channeltype-tech.diff submitted by snuffy (license 5024)

	  Review: https://reviewboard.asterisk.org/r/4204/
	  ........

	  Merged revisions 428632 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428633 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-24 14:39 +0000 [3e08619faf]  Richard Mudgett <rmudgett@digium.com>

	* test_channel_feature_hooks.c: Fix unit test for DTMF hooks.

	  Fix the failing /channels/features/test_features_channel_dtmf unit test.

	  DTMF emulation does not work without a stream of packets to prod the
	  emulation code.

	  Review: https://reviewboard.asterisk.org/r/4199/
	  ........

	  Merged revisions 428604 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428605 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-24 14:32 +0000 [c38ffca9a1]  Richard Mudgett <rmudgett@digium.com>

	* DTMF hooks: Leaving channels need to push any collected digits into the bridge.

	  Any partially collected DTMF digits for a DTMF hook need to be pushed into
	  the bridge when a channel leaves the bridging system as if there were a
	  timeout.

	  Review: https://reviewboard.asterisk.org/r/4199/
	  ........

	  Merged revisions 428601 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428602 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428603 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-21 13:16 +0000 [3576ae47f4]  Richard Mudgett <rmudgett@digium.com>

	* manager: Fix could not extend string messages.

	  When shutting down Asterisk that has an active AMI connection, you get
	  several "failed to extend from %d to %d" messages because use of the
	  EVENT_FLAG_SHUTDOWN attempts to add all AMI permission strings to the
	  event.

	  * Created MAX_AUTH_PERM_STRING to use when creating stack based struct
	  ast_str variables used with the authority_to_str() and
	  user_authority_to_str() functions instead of a variety of magic numbers
	  that could be too small.

	  * Added a special check for EVENT_FLAG_SHUTDOWN to authority_to_str() so
	  it will not attempt to add all permission level strings.

	  Review: https://reviewboard.asterisk.org/r/4200/
	  ........

	  Merged revisions 428570 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428571 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428572 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428573 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-21 11:49 +0000 [4394e0431c]  gtjoseph <george.joseph@fairview5.com>

	* sorcery: Make is_object_field_registered handle field names that are regexes.

	  As a result of https://reviewboard.asterisk.org/r/3305, res_sorcery_realtime
	  was tossing database fields that didn't have an exact match to a sorcery
	  registered field.  This broke the ability to use regexes as field names which
	  manifested itself as a failure of res_pjsip_phoneprov_provider which uses
	  this capability.  It also broke handling of fields that start with '@' in
	  realtime but I don't think anyone noticed.

	  This patch does the following...
	  * Modifies ast_sorcery_fields_register to pre-compile the name regex.
	  * Modifies ast_sorcery_is_object_field_registered to test the regex if it
	    exists instead of doing an exact strcmp.
	  * Modifies res_pjsip_phoneprov_provider with a few tweaks to get it to work
	    with realtime.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4185/
	  ........

	  Merged revisions 428543 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428544 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428545 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-21 07:59 +0000 [d663e045f5]  Olle Johansson <oej@edvina.net>

	* sip.conf.sample - note that media_address does not change listen address, just the SDP


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428526 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-20 20:17 +0000 [2be984fb11]  Matt Jordan <mjordan@digium.com>

	* main/bridge_basic: Fix features regressions introduced by r428165

	  In r428165, two bugs were introduced:

	  * Prior to entering the features retry loop, the buffer that holds the
	    collected digits is wiped. However, this inadvertently wipes out the
	    first collected digit on the first pass through, which is obtained
	    in ast_stream_and_wait. This caused all of the features tests to fail.
	  * If ast_app_dtget returns a hangup (-1), the loop would retry incorrectly.
	    If we detect a hangup, we have to stop trying the feature.

	  This patch fixes both issues.

	  Review: https://reviewboard.asterisk.org/r/4196/
	  ........

	  Merged revisions 428505 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428506 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-20 10:37 +0000 [2f78fde10f]  Matt Jordan <mjordan@digium.com> (License #6283)

	* Fix error with mixed address family ACLs.

	  Prior to this commit, the address family of the first item in an ACL
	  was used to compare all incoming traffic. This could lead to traffic
	  of other IP address families bypassing ACLs.

	  ASTERISK-24469 #close

	  Reported by Matt Jordan
	  Patches:
	  	ASTERISK-24469-11.diff uploaded by Matt Jordan (License #6283)

	  AST-2014-012
	  ........

	  Merged revisions 428402 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 428417 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428422 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428425 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428426 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-20 10:35 +0000 [2486b48cec]  Gareth Palmer (license 5169)

	* AST-2014-018 - func_db: DB Dialplan function permission escalation via AMI.

	  The DB dialplan function when executed from an external protocol (for instance
	  AMI), could result in a privilege escalation.

	  Asterisk now inhibits the DB function from being executed from an external
	  interface if the live_dangerously option is set to no.

	  ASTERISK-24534
	  Reported by: Gareth Palmer
	  patches: submitted by Gareth Palmer (license 5169)
	  ........

	  Merged revisions 428331 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 428363 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428409 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428413 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428418 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-20 10:25 +0000 [2f97486d43]  Jonathan Rose <jrose@digium.com>

	* PJSIP ACLs: Fix ACLs not loading on startup and apply/acl issues on contact

	  The biggest problem this patch fixes is that ACLs weren't previously being
	  loaded when the res_pjsip_acl module was loaded. Yikes. In addition, the
	  ACL options contact_permit and contact_acl were effectively interpreted as
	  contact_deny and this patch fixes that as well.

	  AST-1418 #close
	  Reported by: Thomas Thompson
	  Review: https://reviewboard.asterisk.org/r/4120/

	  ASTERISK-24531 #close
	  Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/4171/
	  ........

	  Merged revisions 428333 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428343 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428376 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-20 09:57 +0000 [a389f2d7a0]  Kevin Harwell <kharwell@digium.com>

	* AST-2014-017 - app_confbridge: permission escalation/ class authorization.

	  Confbridge dialplan function permission escalation via AMI and inappropriate
	  class authorization on the ConfbridgeStartRecord action. The CONFBRIDGE dialplan
	  function when executed from an external protocol (for instance AMI), could
	  result in a privilege escalation. Also, the AMI action “ConfbridgeStartRecord”
	  could also be used to execute arbitrary system commands without first checking
	  for system access. The AMI “ConfbridgeStopRecord” has also been updated to
	  only run under a system authorization.

	  Asterisk now inhibits the CONFBRIDGE function from being executed from an
	  external interface if the live_dangerously option is set to no.  Also, the
	  “ConfbridgeStartRecord” AMI action is now only allowed to execute under a
	  user with system level access.

	  ASTERISK-24490
	  Reported by: Gareth Palmer
	  ........

	  Merged revisions 428332 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428334 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428339 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428342 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-20 08:56 +0000 [1c88ca9d31]  Joshua Colp <jcolp@digium.com>

	* AST-2014-016: Fix crash when receiving an in-dialog INVITE with Replaces in res_pjsip_refer.

	  The implementation of INVITE with Replaces in res_pjsip_refer did not expect them to
	  occur in-dialog. As a result it would incorrectly attempt to hang up a channel it
	  thought was under its control. In reality the channel would be under the control of
	  another thread. When the other thread accessed the channel it would be accessing freed
	  memory and could crash.

	  This change makes res_pjsip_refer not act on an in-dialog INVITE with Replaces.

	  ASTERISK-24528 #close
	  Reported by: Joshua Colp
	  ........

	  Merged revisions 428304 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428305 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428306 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-20 08:49 +0000 [d25eda5fb2]  Joshua Colp <jcolp@digium.com>

	* AST-2014-015: Fix race condition in chan_pjsip when sending responses after a CANCEL has been received.

	  Due to the serialized architecture of chan_pjsip there exists a race condition where a CANCEL may
	  be received and processed before responses (such as 180 Ringing, 183 Session Progress, and 200 OK)
	  are sent. Since the session is in an unexpected state PJSIP will assert when this is attempted.

	  This change makes it so that these responses are not sent on disconnected sessions.

	  ASTERISK-24471 #close
	  Reported by: yaron nahum
	  ........

	  Merged revisions 428301 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428302 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428303 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-19 13:32 +0000 [57c6f89bf0]  Corey Farrell <git@cfware.com>

	* stringfields: Fix bug in ast_string_fields_copy.

	  ast_string_fields_copy relies on the fact that
	  __ast_string_field_release_active never previously
	  zeroed pool->used, so keeping the existing pointer
	  was "ok".  Now that existing pools can be reset to
	  'empty', it is important to set each field to
	  __ast_string_field_empty after releasing the memory.

	  ASTERISK-24535 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4186/
	  ........

	  Merged revisions 428272 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428273 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428274 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-19 11:22 +0000 [a7c9f4c668]  Richard Mudgett <rmudgett@digium.com>

	* ast_str: Fix improper member access to struct ast_str members.

	  Accessing members of struct ast_str outside of the string manipulation API
	  routines is invalid since struct ast_str is supposed to be treated as
	  opaque.

	  Review: https://reviewboard.asterisk.org/r/4194/
	  ........

	  Merged revisions 428244 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428245 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428246 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428255 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-19 06:50 +0000 [7f8b7ace72]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Add support for optimistic SRTP.

	  Optimistic SRTP is the ability to enable SRTP but not have it be
	  a fatal requirement. If SRTP can be used it will be, if not it won't be.
	  This gives you a better chance of using it without having your sessions
	  fail when it can't be.

	  Encrypt all the things!

	  Review: https://reviewboard.asterisk.org/r/3992/
	  ........

	  Merged revisions 428222 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428224 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-19 06:45 +0000 [b2e766a6b7]  Joshua Colp <jcolp@digium.com>

	* alembic: Fix alembic migration for 'moh_passthrough' option in res_pjsip.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428223 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-19 05:51 +0000 [3119c3737f]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_refer: Ensure Refer-To is NULL terminated and parse it as a URI.

	  There is no guarantee that when we get a Refer-To that it will be NULL terminated.
	  As the URI parsing function requires it to be we now NULL terminate it.

	  Additionally parsing the Refer-To as a 'To' header is needless and it can
	  simply be done as a URI. This also fixes a problem where certain Refer-To headers
	  would not be parsed as a 'To' header causing the REFER to fail.

	  ASTERISK-24508 #close
	  Reported by: Beppo Mazzucato

	  Review: https://reviewboard.asterisk.org/r/4187/
	  ........

	  Merged revisions 428195 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428196 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428197 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-18 13:12 +0000 [a94efa239c]  Richard Mudgett <rmudgett@digium.com>

	* parking_tests.c: Add missing newline on a unit test message.
	  ........

	  Merged revisions 428168 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428169 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428170 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-17 10:58 +0000 [2e750db120]  Mark Michelson <mmichelson@digium.com>

	* Allow for transferer to retry when dialing an invalid extension.

	  This allows for a configurable number of attempts for a transferer
	  to dial an extension to transfer the call to. For Asterisk 13, the
	  default values are such that upgrading between versions will not
	  cause a behaivour change. For trunk, though, the defaults will be
	  changed to be more user-friendly.

	  Review: https://reviewboard.asterisk.org/r/4167
	  ........

	  Merged revisions 428145 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428146 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-17 10:02 +0000 [4cea5fd4ba]  Corey Farrell <git@cfware.com>

	* chan_sip: Fix theoretical leak of p->refer.

	  If transmit_refer is called when p->refer is already allocated,
	  it leaks the previous allocation.  Updated code to always free
	  previous allocation during a new allocation.  Also instead of
	  checking if we have a previous allocation, always create a
	  clean record.

	  ASTERISK-15242 #close
	  Reported by: David Woolley
	  Review: https://reviewboard.asterisk.org/r/4160/
	  ........

	  Merged revisions 428117 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428118 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428119 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428120 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-17 09:27 +0000 [948af7fd79]  Matt Jordan <mjordan@digium.com>

	* apps/app_confbridge: Ensure 'normal' users hear message when last marked leaves

	  When r428077 was made for ASTERISK-24522, it failed to take into account users
	  who are neither wait_marked nor end_marked. These users are *also* supposed to
	  hear the 'leader has left the conference' message. Granted, this behaviour is
	  a bit odd; however, that is how it used to work... and behaviour changes are
	  not good.

	  This patch ensures that if there are any 'normal' users present when the last
	  marked user leaves the conference, the message will still be played to them.

	  Note that this regression was caught by the Asterisk Test Suite's
	  confbridge_nominal test, which has a quirky combination of users.
	  ........

	  Merged revisions 428113 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428114 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428115 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428116 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-16 21:08 +0000 [fc2279afea]  Matt Jordan <mjordan@digium.com>

	* app_confbridge: Don't play leader leaving prompt if no one will hear it

	  Consider the following:
	  - A marked user in a conference
	  - One or more end_marked only users in the conference

	  When the marked users leaves, we will be in the conf_state_multi_marked state.
	  This currently will traverse the users, kicking out any who have the end_marked
	  flags. When they are kicked, a full ast_bridge_remove is immediately called on
	  the channels. At this time, we also unilaterally set the need_prompt flag.

	  When the need_prompt flag is set, we then playback a sound to the bridge
	  informing everyone that the leader has left; however, no one is left in the
	  bridge. This causes some odd behaviour for the end_marked users - they are
	  stuck waiting for the bridge to be unlocked. This results in them waiting for
	  5 or 6 seconds of dead air before hearing that they've been kicked.

	  Unfortunately, we do have to keep the bridge locked while we're playing back
	  the 'leader-has-left' prompt. If there are any wait_marked users in the
	  conference, this behaviour can't be easily changed - but we do make the case
	  of the end_marked users better with this patch.

	  Review: https://reviewboard.asterisk.org/r/4184/

	  ASTERISK-24522 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 428077 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 428078 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428079 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428080 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-16 15:13 +0000 [656601d8c4]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Remove AOR check when dialing and one is specified.

	  The AOR value may contain the name of an AOR or a full SIP URI.
	  Checking if the AOR exists can't be done as a result of this.
	  ........

	  Merged revisions 428051 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428052 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428053 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-16 06:12 +0000 [bc02cbabd9]  Joshua Colp <jcolp@digium.com>

	* chan_sip: Fix bug where DTLS configuration from general would copy dtlsenable.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428034 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-15 15:52 +0000 [6993743b1f]  Etienne Lessard (License 6394)

	* cel/cel_odbc: Provide microsecond precision in 'eventtime' column when possible

	  This patch adds microsecond precision when inserting a CEL record into a table
	  with an "eventtime" column of type timestamp, instead of second precision. The
	  documentation (configs/cel_odbc.conf.sample) was already saying that the
	  eventtime column included microseconds precision, but that was not the case.

	  Also, without this patch, if you had a table with an "eventtime" column of
	  type varchar, you had millisecond precision. With this patch, you also get
	  microsecond precision in this case.

	  Review: https://reviewboard.asterisk.org/r/3980

	  ASTERISK-24283 #close
	  Reported by: Etienne Lessard
	  patches:
	    cel_odbc_time_precision.patch uploaded by Etienne Lessard (License 6394)
	  ........

	  Merged revisions 427952 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427953 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427954 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428010 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-15 15:36 +0000 [ece61f5ed1]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Add additional log message when an AOR is specified when dialing and it does not exist.

	  ASTERISK-24499 #close
	  Reported by: Rusty Newton
	  ........

	  Merged revisions 428007 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 428008 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428009 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-15 13:01 +0000 [49e63a191d]  Joshua Colp <jcolp@digium.com>

	* chan_motif / chan_pjsip: Fix incorrect "No such module" messages when reloading.

	  For chan_motif the direct return value of the underlying config options framework
	  was passed back. This can relay various states which the module loader would not
	  interpet as success. It has been changed so only on errors will it report back
	  an error.

	  For chan_pjsip the code implemented a dummy reload function which always
	  returned an error. This has been removed as all configuration is held within
	  res_pjsip instead.

	  ASTERISK-23651 #close
	  Reported by: Rusty Newton
	  ........

	  Merged revisions 427981 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427982 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427983 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-15 12:29 +0000 [9d2882d274]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Enforce requirements for session timer minimum expiration period and normal expiration period.

	  This change enforces the requirements in PJSIP for session timer configuration. The minimum
	  expiration period must be 90 seconds or higher and the normal expiration period can not
	  be lower than the minimum expiration period. If either of these were done the code would
	  assert at session setup time.

	  ASTERISK-24336 #close
	  Reported by: Leon Rowland
	  ........

	  Merged revisions 427978 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427979 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427980 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-15 10:31 +0000 [d0523b4b3c]  Michael K. (license 6621)

	* chan_sip: Add support for setting DTLS configuration in the general section.

	  Configuration of DTLS in the general section will be applied to any users
	  or peers. If configuration exists at their level it overrides the general
	  section values.

	  ASTERISK-24128 #close
	  Reported by: Michael K.
	  patches:
	    dtls_default_settings.patch submitted by Michael K. (license 6621)

	  Review: https://reviewboard.asterisk.org/r/3867/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427950 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-14 15:51 +0000 [3268544907]  Matt Jordan <mjordan@digium.com>

	* tests/test_cel: Unlock bridge on off nominal paths

	  If the test fails due to memory allocation errors, we may as well attempt to
	  unlock the bridge on the way out.
	  ........

	  Merged revisions 427927 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427932 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-14 12:12 +0000 [df2090b931]  Jonathan Rose <jrose@digium.com>

	* Documentation: Revise explanation of cdr.conf option 'Unanswered'

	  ASTERISK-24279 #close
	  Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/4109/
	  ........

	  Merged revisions 427901 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427902 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427903 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-14 09:52 +0000 [ba811ae1c3]  Scott Griepentrog <sgriepentrog@digium.com>

	* stun: correct attribute string padding to match rfc

	  When sending the USERNAME attribute in an RTP STUN
	  response, the implementation in append_attr_string
	  passed the actual length, instead of padding it up
	  to a multiple of four bytes as required by the RFC
	  3489.  This change adds separate variables for the
	  string and padded attributed lengths, and performs
	  padding correctly.

	  Reported by: Thomas Arimont
	  Review: https://reviewboard.asterisk.org/r/4139/
	  ........

	  Merged revisions 427874 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427875 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427876 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427877 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-14 09:28 +0000 [2d9471ab1f]  Mark Michelson <mmichelson@digium.com>

	* Fix race condition that could result in ARI transfer messages not being sent.

	  From reviewboard:

	  "During blind transfer testing, it was noticed that tests were failing
	  occasionally because the ARI blind transfer event was not being sent.
	  After investigating, I detected a race condition in the blind transfer
	  code. When blind transferring a single channel, the actual transfer
	  operation (i.e. removing the transferee from the bridge and directing
	  them to the proper dialplan location) is queued onto the transferee
	  bridge channel. After queuing the transfer operation, the blind transfer
	  Stasis message is published. At the time of publication, snapshots of
	  the channels and bridge involved are created. The ARI subscriber to the
	  blind transfer Stasis message then attempts to determine if the bridge
	  or any of the involved channels are subscribed to by ARI applications.
	  If so, then the blind transfer message is sent to the applications. The
	  way that the ARI blind transfer message handler works is to first see
	  if the transferer channel is subscribed to. If not, then iterate over
	  all the channel IDs in the bridge snapshot and determine if any of
	  those are subscribed to. In the test we were running, the lone
	  transferee channel was subscribed to, so an ARI event should have been
	  sent to our application. Occasionally, though, the bridge snapshot did
	  not have any channels IDs on it at all. Why?

	  The problem is that since the blind transfer operation is handled by a
	  separate thread, it is possible that the transfer will have completed and
	  the channels removed from the bridge before we publish the blind transfer
	  Stasis message. Since the blind transfer has completed, the bridge on
	  which the transfer occurred no longer has any channels on it, so the
	  resulting bridge snapshot has no channels on it. Through investigation of
	  the code, I found that attended transfers can have this issue too for the
	  case where a transferee is transferred to an application."

	  The fix employed here is to decouple the creation of snapshots for the transfer
	  messages from the publication of the transfer messages. This way, snapshots
	  can be created to reflect what they are at the time of the transfer operation.

	  Review: https://reviewboard.asterisk.org/r/4135
	  ........

	  Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427870 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427873 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-14 08:56 +0000 [737b811749]  Joshua Colp <jcolp@digium.com>

	* app_confbridge: Play "leader has left" sound even when musiconhold is enabled.

	  Currently if the leader of a conference bridge leaves any participant
	  that has musiconhold enabled will not hear the "leader has left" sound.
	  This is because musiconhold is started and THEN the sound is played.

	  This change makes it so that the sound is played and THEN musiconhold
	  is started. This provides a better experience for users as they may not
	  have known previously why they went back to musiconhold.

	  Review: https://reviewboard.asterisk.org/r/4177/
	  ........

	  Merged revisions 427844 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427845 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427846 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427847 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-14 08:40 +0000 [2454505d5a]  Mark Michelson <mmichelson@digium.com>

	* Fix race condition where duplicated requests may be handled by multiple threads.

	  This is the Asterisk 13 version of the patch. The main difference is in the pubsub
	  code since it was completely refactored between Asterisk 12 and 13.

	  Review: https://reviewboard.asterisk.org/r/4175
	  ........

	  Merged revisions 427841 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427842 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-13 16:26 +0000 [49b7a1cbaf]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_exten_state: PJSIPShowSubscriptionsInbound causes crash

	  When using a non-default sorcery wizard (in this instance realtime) for
	  outbound registrations and after adding in an appropriate call to
	  ast_sorcery_apply_config() (since it is missing) Asterisk will crash after
	  a stack overflow occurs due to the code infinitely recursing.  The fix entails
	  removing the outbound registration state dependency from the outbound
	  registration sorcery object and instead keeping an in memory container that
	  can be used to lookup the state when needed.

	  ASTERISK-24514
	  Reported by: Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/4164/
	  ........

	  Merged revisions 427814 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427815 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427823 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-13 09:46 +0000 [74e706878b]  Kinsey Moore <kmoore@digium.com>

	* Stasis: Fix StasisEnd message ordering

	  This change corrects message ordering in cases where a channel-related
	  message can be received after a Stasis/ARI application has received the
	  StasisEnd message. The StasisEnd message was being passed to
	  applications directly without waiting for the channel topic to empty.

	  As a result of this fix, other bugs were also identified and fixed:
	  * StasisStart messages were also being sent directly to apps and are
	    now routed through the stasis message bus properly
	  * Masquerade monitor datastores were being removed at the incorrect
	    time in some cases and were causing StasisEnd messages to not be sent
	  * General refactoring where necessary for the above
	  * Unsubscription on StasisEnd timing changes to prevent additional
	    messages from following the StasisEnd when they shouldn't

	  A channel sanitization function pointer was added to reduce processing
	  and AO2 lookups.

	  Review: https://reviewboard.asterisk.org/r/4163/
	  ASTERISK-24501 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 427788 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427789 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427790 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-12 18:23 +0000 [cc4c396647]  Matt Jordan <mjordan@digium.com>

	* main/rtp_engine: Fix crash when processing more than one RTCP report info block

	  Asterisk - in res_rtp_asterisk - only understands a single RTCP report info
	  block. When the RTCP information was refactored in the RTP Engine to be pushed
	  over the Stasis message bus, I put in the hooks into the engine to handle
	  multiple RTCP report info blocks, in the hope that a future RTP implementation
	  would be able to provide that data. Unfortunately, res_rtp_asterisk has a
	  tendency to "lie":
	  (1) It will send RTCP reports with a reception_report_count greater than 1
	      (which is pulled directly from the RTCP packet itself, so that part is
	      correct)
	  (2) It will only provide a single report block

	  When the rtp_engine goes to convert this to a JSON blob, hilarity ensues as it
	  looks for a report block that doesn't exist.

	  This patch updates the rtp_engine to be a bit more skeptical about what it is
	  presented with. While this could also be fixed in res_rtp_asterisk, this patch
	  prefers to fix it in the engine for two reasons:
	  (1) The engine is designed to work with multiple RTP implementation, and hence
	      having it be more robust is a good thing (tm)
	  (2) res_rtp_asterisk's handling of RTCP information is "fun". It should report
	      the correct reception_report_count; ideally it should also be giving us all
	      of the blocks - but it is *definitely* not designed to do that. Going down
	      that road is a non-trivial effort.

	  Review: https://reviewboard.asterisk.org/r/4158/

	  ASTERISK-24489 #close
	  Reported by: Gregory Malsack
	  Tested by: Gregory Malsack

	  ASTERISK-24498 #close
	  Reported by: Beppo Mazzucato
	  Tested by: Beppo Maazucato
	  ........

	  Merged revisions 427762 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427763 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427771 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-12 14:40 +0000 [ec1a7654f3]  Corey Farrell <git@cfware.com>

	* Fix leak in AMI Action Bridge

	  Add missing reference cleanup for newly created bridge.

	  ASTERISK-24281
	  Reported by: Stefan Engström
	  Review: https://reviewboard.asterisk.org/r/4154/
	  ........

	  Merged revisions 427736 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427737 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427738 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-12 10:13 +0000 [dbb8f0a935]  Joshua Colp <jcolp@digium.com>

	* pbx: Fix off-nominal case where a freed extension may still be used.

	  If during the operation of adding an extension a priority is added but
	  fails it is possible for the extension to be freed but still exist in
	  the PBX core. If this occurs subsequent lookups may try to access the
	  extension and end up in freed memory.

	  This change removes the extension from the PBX core when the priority
	  addition fails and then frees the extension.

	  ASTERISK-24444 #close
	  Reported by: Leandro Dardini

	  Review: https://reviewboard.asterisk.org/r/4162/
	  ........

	  Merged revisions 427709 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427710 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427711 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427712 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-12 07:47 +0000 [9f89b83269]  Corey Farrell <git@cfware.com>

	* Fix compiler error when using ./configure --enable-dev-mode --enable-coverage

	  When DONT_OPTIMIZE is enabled with dev-mode, it causes a shadow compilation
	  to be done with output to /dev/null.  This can cause errors with coverage
	  when GCC attempts to write to /dev/null.gcno.  This change disables
	  coverage for the shadow compilation.

	  ASTERISK-24502 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4151/
	  ........

	  Merged revisions 427682 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427683 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427684 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427685 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-09 02:01 +0000 [21c41e4542]  Corey Farrell <git@cfware.com>

	* manager: Fix HTTP connection reference leaks.

	  Fix reference leak that happens if (session && !blastaway).

	  ASTERISK-24505 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4153/
	  ........

	  Merged revisions 427641 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427642 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427643 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427644 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-08 18:38 +0000 [f4392c4b6d]  Xavier Hienne (License 6657)

	* channels/chan_mgcp: Fix regression which causes gateways to be skipped

	  In r227276, a while loop was turned into a for loop. Unfortunately, a portion
	  of the while loop was left in the code such that, when a static gateway is
	  encountered in the list of MGCP gateways, the next gateway would be skipped.
	  At best, we would simply flip past a gateway; at worst, this could lead to a
	  crash.

	  ASTERISK-24500 #close
	  Reported by: Xavier Hienne
	  patches:
	    chan_mgcp.patch uploaded by Xavier Hienne (License 6657)
	  ........

	  Merged revisions 427613 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427614 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427615 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427616 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-08 18:26 +0000 [d773f9d03e]  Dmitriy Bubnov (License 6651),Dmitry Bubnov (License 6651)

	* addons/chan_mobile: Increase buffer size of UCS2 encoded SMS messages

	  When UCS2 character encoding is used, one symbol in national language can be
	  expanded to 4 bytes. The current buffer used for receiving message in
	  do_monitor_phone is 256 bytes, which is not large enough for incoming messages.

	  For example:
	  * AT+CMGR phone response prefix
	    '+CMGR: "REC UNREAD","+7**********",,"14/10/29,13:31:39+12"\r\n' - 60 bytes
	  * SMS body with UCS2 encoding (max) - 280 bytes
	  * AT+CMGR phone response suffix '\r\n\r\nOK\r\n' - 8 bytes
	  * Terminating null character - 1 byte

	  This results in a needed buffer size of 349 bytes. Hence, this patch opts for a
	  350 byte buffer.

	  ASTERISK-24468 #close
	  Reported by: Dmitriy Bubnov
	  patches:
	    chan_mobile-1_8.diff uploaded by Dmitriy Bubnov (License 6651)
	    chan_mobile-trunk.diff uploaded by Dmitry Bubnov (License 6651)
	  ........

	  Merged revisions 427607 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427610 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427611 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427612 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-08 18:14 +0000 [08d773532b]  abelbeck <lonnie@abelbeck.com> (License 5903)

	* app_voicemail: Fix enhancement that allowed multiple recipients in To: header

	  An issue existed in r420577, which added multiple recipients to voicemail
	  emails. The patch, when looking at the intended recipients, looked ahead for
	  the '|' character inside a while loop which already had pulled out the
	  appropriate field parsing on the '|' character. This would cause it to skip
	  the recipients.

	  This patch fixes it such that it relies completely on the while loop to parse
	  through the e-mail fields.

	  Note that the original author of the patch looked at this fix and approved it.

	  ASTERISK-24250 #close
	  Reported by: abelbeck
	  patches:
	    voicemail-420577-to-comma-fix.diff uploaded by abelbeck (License 5903)
	  ........

	  Merged revisions 427585 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427586 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-08 18:04 +0000 [9a1ab5d548]  Matt Jordan <mjordan@digium.com>

	* bridge_native_rtp: Fix T.38 issues with remote bridges

	  After r425242 the fax/sip/directmedia_reinvite_t38 test started failing due to
	  the surviving channel not being re-INVITEd back from T.38 to audio. This patch
	  fixes that bug - a deeper explanation of what happened follows.

	  When two RTP channels are in a native bridge, the bridging layer will
	  investigate each via the get_rtp_info glue callback. This callback returns the
	  native bridge preference of the channel *at that moment in time* (that part is
	  key). At different points during the bridging, the native bridging layer will
	  inform the RTP capable channels of the status of the bridge via the update_peer
	  glue callback.

	  In a T.38 scenario with audio direct media, the sequence of events will often
	  look like the following:
	   * SIP/A and SIP/B both have audio and enter a native bridge.
	   * Asterisk re-INVITEs audio between SIP/A and SIP/B directly (via an
	     update_peer callback).
	   * SIP/A sends a re-INVITE to T.38, which causes Asterisk to send a re-INVITE
	     to T.38 to SIP/B. Assuming everyone 200 OKs the process, the UDPTL stack
	     receives UDPTL packets in Asterisk from both endpoints. From the perspective
	     of the channels, we are now in a local bridge for T.38, even though we are
	     technically still in a remote bridge in bridge_native_rtp. (YAY!)
	   * When one side hangs up, bridge_native_rtp is told to stop bridging. It then
	     re-evaluates the channels and asks them how they are bridged - and since
	     T.38 is enabled, they reply with a Local bridge (which is correct), but is
	     wrong because the audio portion is still technically in a remote bridge.
	   * Asterisk releases the surviving channel, whose audio is *not* re-INVITED
	     back to Asterisk as bridge_native_rtp incorrectly assumes that it was in a
	     local bridge.

	  Ironically, prior to r425242, this used to work mostly due to a fluke in the
	  bridging layer.

	  The purpose of the get_rtp_info callback shouldn't be modified: it should tell
	  the bridging layer what kind of bridge the channel prefers at that moment in
	  time. If you have T.38 enabled, that *must* be a local bridge, as the UDPTPL
	  stack must be in the media path. As such, this patch does not modify that
	  part of the code.

	  However, we have to tell the channels to re-evaluate themselves when they come
	  out of a native bridge, since we can no longer trust the get_rtp_info callbacks
	  when the native bridge is being stopped. Something else may have changed in the
	  channels, and they may now be lying to us. As such, this patch makes it so that
	  we unilaterally tell the channels that they are no longer bridged via the
	  update_peer callback. This is actually what the channels expect anyway: code in
	  both chan_sip and chan_pjsip's callbacks look at the T.38 state and - if they
	  were in T.38 - send a re-INVITE to get the audio back to Asterisk.

	  Review: https://reviewboard.asterisk.org/r/4157/
	  ........

	  Merged revisions 427582 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427583 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427584 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-08 12:20 +0000 [d4fd0774f4]  Corey Farrell <git@cfware.com>

	* chan_console: Fix reference leaks to pvt.

	  Fix a bunch of calls to get_active_pvt
	  where the reference is never released.

	  ASTERISK-24504 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4152/
	  ........

	  Merged revisions 427554 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427555 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427557 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427566 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-06 13:26 +0000 [7571bae5ab]  Richard Mudgett <rmudgett@digium.com>

	* app_agent_pool: Made agent alert interruptable by DTMF.

	  Made agent able to interrupt the alerting beep playback with DTMF.  Any
	  digit can interrupt if the call does not need to be acknowledged.  Only
	  the first digit of the acknowledgement can interrupt if the call needs to
	  be acknowledged.  The agent interrupting the alerting playback builds on
	  the ASTERISK-24447 patch because it knows what digit interrupted the
	  playback and needs to be able to pass that digit to the DTMF hook digit
	  collection code.

	  ASTERISK-24257 #close
	  Reported by: Steve Pitts

	  Review: https://reviewboard.asterisk.org/r/4123/
	  ........

	  Merged revisions 427508 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427512 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427519 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-06 13:12 +0000 [a68baad74f]  Richard Mudgett <rmudgett@digium.com>

	* Bridge DTMF hooks: Made audio pass from the bridge while waiting for more matching digits.

	  * Made collecting DTMF digits for the DTMF feature hooks pass frames from
	  the bridge.

	  * Made collecting DTMF digits possible by other bridge hooks if there is a
	  need.

	  ASTERISK-24447 #close
	  Reported by: Richard Mudgett

	  Review: https://reviewboard.asterisk.org/r/4123/
	  ........

	  Merged revisions 427493 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427494 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427495 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-06 12:21 +0000 [47074f4bfd]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Ensure in-dialog responses have an endpoint associated.

	  When handling incoming messages we determine if it is associated with
	  a dialog. If so we use that to determine what serializer and endpoint
	  to use for the message. Previously this would pass the endpoint to the
	  endpoint lookup module to actually place the endpoint completely on the
	  message. For in-dialog responses, however, this did not occur as
	  dialog processing took over and the endpoint lookup did not occur.

	  This change just places the endpoint in the expected spot immediately
	  instead of relying on the endpoint lookup module. In-dialog responses
	  thus have the expected endpoint.

	  AST-1459 #close

	  Review: https://reviewboard.asterisk.org/r/4146/
	  ........

	  Merged revisions 427490 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427491 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427492 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-06 06:15 +0000 [4d80f223af]  Corey Farrell <git@cfware.com>

	* main/file.c: fix possible extra ast_module_unref to format modules.

	  fn_wrapper only adds a reference to the format's module if the file
	  was able to be opened.  If not this causes an unmatched
	  ast_module_unref in filestream_destructor.  Move ast_module_ref to
	  get_stream.

	  ASTERISK-24492 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4149/
	  ........

	  Merged revisions 427464 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427465 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427466 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427467 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-06 03:24 +0000 [c46664305a]  Corey Farrell <git@cfware.com>

	* res_hep: fix major leak that occurs when config is missing or enabled=no.

	  Add missing unreference in hepv3_send_packet.

	  ASTERISK-24491 #close
	  Reported by: Zane Conkle
	  Tested by: Zane Conkle
	  Review: https://reviewboard.asterisk.org/r/4150/
	  ........

	  Merged revisions 427400 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427405 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427408 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-06 03:18 +0000 [7e2369310c]  Corey Farrell <git@cfware.com>

	* Fix unintential memory retention in stringfields.

	  * Fix missing / unreachable calls to __ast_string_field_release_active.
	  * Reset pool->used to zero when the current pool->active reaches zero.

	  ASTERISK-24307 #close
	  Reported by: Etienne Lessard
	  Tested by: ibercom, Etienne Lessard
	  Review: https://reviewboard.asterisk.org/r/4114/
	  ........

	  Merged revisions 427380 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 427381 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427382 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427384 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427388 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-05 20:41 +0000 [362dde2229]  gtjoseph <george.joseph@fairview5.com>

	* test_strings:  Remove string tests that exercise asserts.

	  Since unit tests are run with DO_CRASH, those tests were causing
	  the test to fail.

	  Tested-by: George Joseph
	  ........

	  Merged revisions 427354 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427355 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427356 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427357 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-05 13:53 +0000 [69f29e627f]  Mark Michelson <mmichelson@digium.com>

	* Make the disable_tcp_switch PJSIP system object enabled by default.

	  Testing has shown repeatedly that PJSIP's default behavior of switching
	  automatically to TCP for large messages can cause issues. The most common
	  issues are that devices that we are communicating with do not handle the
	  switch to TCP gracefully, thus causing situations such as broken calls or
	  broken subscriptions. Now, in order to have this behavior happen, you must
	  opt into it. The sample file has been updated to warn that enabling the
	  TCP switch behavior may cause issues for you, so use at your own risk.
	  ........

	  Merged revisions 427334 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427335 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-05 06:19 +0000 [b06078880b]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_multihomed: Add logging during startup to aid debugging if local DNS is misbehaving.

	  This change adds a bit of logging so if the local DNS is misbehaving it is easier
	  to track down what is going on and where Asterisk may be hanging.

	  ASTERISK-24438 #close
	  Reported by: Melissa Shepherd

	  Review: https://reviewboard.asterisk.org/r/4148/
	  ........

	  Merged revisions 427300 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427303 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427306 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-04 18:17 +0000 [d5de94201e]  gtjoseph <george.joseph@fairview5.com>

	* config: Make text_file_save and 'dialplan save' escape semicolons in values.

	  When a config file is read, an unescaped semicolon signals comments which are
	  stripped from the value before it's stored.  Escaped semicolons are then
	  unescaped and become part of the value.  Both of these behaviors are normal
	  and expected.  When the config is serialized either by 'dialplan save' or
	  AMI/UpdateConfig however, the now unescaped semicolons are written as-is.
	  If you actually reload the file just saved, the unescaped semicolons are
	  now treated as start of comments.

	  Since true comments are stripped on read, any semicolons in
	  ast_variable.value must have been escaped originally.  This patch
	  re-escapes semicolons in ast_variable.values before they're written to
	  file either by 'dialplan save' or config/ast_config_text_file_save which
	  is called by AMI/UpdateConfig. I also fixed a few pre-existing formatting
	  issues nearby in pbx_config.c

	  Tested-by: George Joseph
	  ASTERISK-20127 #close

	  Review: https://reviewboard.asterisk.org/r/4132/
	  ........

	  Merged revisions 427275 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427276 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427277 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-04 16:51 +0000 [c77a71ad2f]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Apply the 'user_eq_phone' setting to the To header as well.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427259 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-04 16:31 +0000 [5e43d68717]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Allow + at the beginning of a phone number when user_eq_phone is enabled.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427257 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-04 14:49 +0000 [bd42a09d7f]  gtjoseph <george.joseph@fairview5.com>

	* config: BUG: Restore ability for non-templ to be used as base objs in config.

	  My recent refactor of config.c accidentally removed the capability for an
	  object to inherit from a non-template object.

	  This patch restores the capability to inherit from both template and
	  non-template objects.

	  Tested-by: George Joseph
	  Reported-by: Scott Griepentrog
	  ASTERISK-24487 #close

	  Review: https://reviewboard.asterisk.org/r/4147/
	  ........

	  Merged revisions 427227 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427228 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427229 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-04 13:46 +0000 [97e1c7f3a9]  Corey Farrell <git@cfware.com>

	* func_talkdetect: Fix stasis message leak in audiohook callback.

	  ASTERISK-24482 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4142/
	  ........

	  Merged revisions 427203 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427204 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427205 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-04 13:33 +0000 [9f2874639d]  Corey Farrell <git@cfware.com>

	* res_http_websockets: Fix extra unref of module

	  In websocket_add_protocol_internal is used to add the "echo"
	  protocol, but ast_websocket_remove_protocol is used to remove
	  it.  This causes an extra call to ast_module_unref.

	  ASTERISK-24480 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4140/
	  ........

	  Merged revisions 427200 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427201 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427202 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-04 08:11 +0000 [bdc35c77b9]  Corey Farrell <git@cfware.com>

	* Fix crash caused by merge error on review 4138

	  When merging from 12 to 13 there were conflicts,
	  I mistakenly had the loop run ast_closestream(others[0])
	  when it should be ast_closestream(others[x]).
	  ........

	  Merged revisions 427181 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427182 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-04 06:03 +0000 [d159885e50]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_outbound_registration: Add virtual line support.

	  Virtual line support establishes a relationship between messages
	  related to an outbound registration and a local endpoint. This is
	  accomplished by attaching a parameter to the Contact of the outbound
	  registration and looking for it on any received requests. If the
	  parameter exists and can be matched to an outbound registration
	  the configured endpoint is associated with the request.

	  Review: https://reviewboard.asterisk.org/r/2964/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427165 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-03 12:22 +0000 [33f0251b6c]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Add disable_tcp_switch option.

	  When a packet exceeds the MTU, pjproject will switch from UDP to TCP.  In
	  some circumstances (on some networks), this can cause some issues with
	  messages not getting sent to the correct destination - and can also cause
	  connections to get dropped due to quirks in pjproject deciding to
	  terminate TCP connections with no messages.

	  While fixing the routing/messaging issues is important, having a
	  configuration option in Asterisk that tells pjproject to not switch over
	  to TCP would be useful.  That way, if some glitch is discovered on some
	  other network/site, we can at least disable the behavior until a fix is
	  put into place.

	  AFS-197 #close

	  Review: https://reviewboard.asterisk.org/r/4137/
	  ........

	  Merged revisions 427129 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427130 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427137 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-03 09:03 +0000 [b9aeff9580]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Update CHANGES file to include 'moh_passthrough' setting


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427113 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-03 08:45 +0000 [ac091d4184]  Joshua Colp <jcolp@digium.com>

	* chan_pjsip: Add support for passing hold and unhold requests through.

	  This change adds an option, moh_passthrough, that when enabled will pass
	  hold and unhold requests through using a SIP re-invite. When placing on
	  hold a re-invite with sendonly will be sent and when taking off hold a
	  re-invite with sendrecv will be sent. This allows remote servers to handle
	  the musiconhold instead of the local Asterisk instance being responsible.

	  Review: https://reviewboard.asterisk.org/r/4103/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427112 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-02 20:36 +0000 [285be15aaf]  Corey Farrell <git@cfware.com>

	* Fix compile error caused by review 4138

	  There is no procedure called ast_closeframe, fix code to use
	  ast_closestream.

	  Reported By: Matt Jordan
	  ........

	  Merged revisions 427087 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427088 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427089 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427090 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-02 02:13 +0000 [509c04ef38]  Corey Farrell <git@cfware.com>

	* Fix ast_writestream leaks

	  Fix cleanup in __ast_play_and_record where others[x] may be leaked.
	  This was caught where prepend != NULL && outmsg != NULL, once
	  realfile[x] == NULL any further others[x] would be leaked. A cleanup
	  block was also added for prepend != NULL && outmsg == NULL.

	  11+: Fix leak of ast_writestream recording_fs in
	  app_voicemail:leave_voicemail.

	  ASTERISK-24476 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4138/
	  ........

	  Merged revisions 427023 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 427024 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427025 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427026 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427027 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-02 01:40 +0000 [85c1822a9d]  Corey Farrell <git@cfware.com>

	* func_jitterbuffer: fix frame leaks.

	  Fix code paths where it is possible for frames to leak.
	  Fix uninitialized variable in jb_get_fixed and jb_get_adaptive.

	  ASTERISK-22409 #related
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4128/
	  ........

	  Merged revisions 427019 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 427020 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 427021 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427022 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-11-01 20:01 +0000 [5db1c978e3]  Matt Jordan <mjordan@digium.com>

	* res/res_stasis: Fix crash on module unload while performing operation

	  When the res_stasis module is unloaded, it will dispose of the apps_registry
	  container. This is a problem if an ARI operation is in flight that attempts
	  to use the registry, as the shutdown occurs in a separate thread. This patch
	  adds some sanity checks to the various routines that access the registry which
	  cause the operations to fail if the apps_registry does not exist.

	  Crash caught by the Asterisk Test Suite.
	  ........

	  Merged revisions 426995 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426996 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426997 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-31 11:52 +0000 [4219c40775]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* install init.d files on GNU/kFreeBSD

	  Review: https://reviewboard.asterisk.org/r/4118/
	  ........

	  Merged revisions 426926 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 426927 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426933 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426934 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426935 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-31 11:41 +0000 [28173ddf05]  Scott Griepentrog <sgriepentrog@digium.com>

	* pjsip: clarify tls cert and key file usage

	  A question arose as to whether a .pem file
	  could be provided in place of the .crt and
	  .key files in a PJSIP TLS configuration. I
	  tested this and discovered that although a
	  cert will be read from the pem file, a key
	  will not, and thus the priv_key_file entry
	  is still required. This update to the fine
	  documentation clarifies the option usage.

	  AST-1448 #close
	  Review: https://reviewboard.asterisk.org/r/4129/
	  Reported by: John Bigelow
	  ........

	  Merged revisions 426928 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426930 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426932 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-31 11:24 +0000 [f59db388a7]  John Bigelow (License 5091)

	* pjsip: Handle outbound unregister correctly

	  This updates the status of the outbound registration
	  to reflect when it has been unregistered.  Since the
	  registration is unregistered but is not stopped, the
	  registration schedule remains active as before.  The
	  patch also updates the documentation of both the AMI
	  and CLI commands.

	  ASTERISK-24411 #close
	  Review: https://reviewboard.asterisk.org/r/4119/
	  Reported by: John Bigelow
	  patches:
	    unregister-patch1.txt uploaded by John Bigelow (License 5091)
	  ........

	  Merged revisions 426923 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426924 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426925 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-30 22:26 +0000 [d88282af40]  Matt Jordan <mjordan@digium.com>

	* channels/sip/reqresp_parser: Fix unit tests for r426594

	  When r426594 was made, it did not take into account a unit test that verified
	  that the function properly populated the unsupported buffer. The function
	  would previously memset the buffer if it detected it had any contents; since
	  this function can now be called iteratively on successive headers, the unit
	  tests would now fail. This patch updates the unit tests to reset the buffer
	  themselves between successive calls, and updates the documentation of the
	  function to note that this is now required.
	  ........

	  Merged revisions 426858 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 426860 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426863 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426865 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426868 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-30 22:09 +0000 [bf684b63a3]  Corey Farrell <git@cfware.com>

	* REF_DEBUG: Install refcounter.py to $(ASTDATADIR)/scripts

	  This change ensures refcounter.py is installed to a place where it
	  can be found by the Asterisk testsuite if REF_DEBUG is enabled.

	  ASTERISK-24432 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4094/
	  ........

	  Merged revisions 426830 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 426831 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426832 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426833 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426834 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-30 18:56 +0000 [e4374a3abe]  Corey Farrell <git@cfware.com>

	* app_queue: fix a couple leaks to struct call_queue in set_member_value

	  set_member_value has a couple leaks to references in the variable q
	  found through testsuite tests/queues/set_penalty.  Also remove the
	  REF_DEBUG_ONLY_QUEUES compiler declaration, this is no longer possible
	  with the updated REF_DEBUG code.

	  ASTERISK-24466 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4125/
	  ........

	  Merged revisions 426805 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426806 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426807 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426808 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-30 18:45 +0000 [ced81afff2]  Corey Farrell <git@cfware.com>

	* audiohooks: Clean references to formats

	  Cleanup references to in_translate[x].format and
	  out_translate[x].format in ast_audiohook_detach_list.

	  ASTERISK-24465 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4124/
	  ........

	  Merged revisions 426803 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426804 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-30 16:14 +0000 [a537e314d1]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip_exten_state: PJSIPShowSubscriptionsInbound causes crash

	  Currently, it is possible for some subscriptions to get into a NULL state. When
	  this occurs and the PJSIPShowSubscriptionsInbound ami action is issued and a
	  device is subscribed for extension state then the associated subscription state
	  object can't be located.  The code then attempts to dereference a NULL object.
	  Added a NULL check to avoid the problem.

	  Reported by: John Bigelow
	  ........

	  Merged revisions 426779 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426780 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426781 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-30 12:18 +0000 [cd52456ea1]  Kevin Harwell <kharwell@digium.com>

	* res_pjsip: incorrect qualify statistics after disabling for contact

	  When removing the qualify_frequency from an AoR or a contact the statistics
	  shown when issuing "pjsip show aors" from the CLI are incorrect. This patch
	  deletes the contact's status object from sorcery, disassociating it from the
	  contact, if the qualify_freqency is removed from configuration.

	  ASTERISK-24462 #close
	  Reported by: Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/4116/
	  ........

	  Merged revisions 426755 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426757 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426761 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-30 04:21 +0000 [5d8d90c402]  Walter Doekes <walter+asterisk@wjd.nu>

	* app_voicemail: Fix unchecked bounds of myArray in IMAP_STORAGE.

	  In update_messages_by_imapuser(), messages were appended to a finite
	  array which resulted in a crash when an IMAP mailbox contained more
	  than 256 entries. This memory is now dynamically increased as needed.

	  Observe that this patch adds a bunch of XXX's to questionable code. See
	  the review (url below) for more information.

	  ASTERISK-24190 #close
	  Reported by: Nick Adams
	  Tested by: Nick Adams

	  Review: https://reviewboard.asterisk.org/r/4126/
	  ........

	  Merged revisions 426691 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 426692 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426696 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426702 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426706 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-30 01:15 +0000 [c866ced76b]  Igor Goncharovskiy <igor.goncharovsky@gmail.com>

	* 
	  Add additional checks for NULL pointers to fix several crashes reported.

	  ASTERISK-24304 #close
	  Reported by: dhanapathy sathya
	  ........

	  Merged revisions 426666 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426667 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426668 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426669 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-29 20:59 +0000 [0ddc3bde24]  Olle Johansson <oej@edvina.net> (License 5267)

	* channels/chan_sip: Add improved support for 4xx error codes

	  This patch adds support for 414, 493, 479, and a stray 400 response in REGISTER
	  response handling. This helps interoperability in a number of scenarios.

	  Review: https://reviewboard.asterisk.org/r/3437

	  patches:
	    rb3437.patch uploaded by oej (License 5267)
	  ........

	  Merged revisions 426599 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 426600 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426601 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426602 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426603 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-29 20:48 +0000 [ff83ff564c]  Olle Johansson <oej@edvina.net> (License 5267)

	* channels/chan_sip: Support mutltiple Supported and Required headers

	  A SIP request may contain multiple Supported: and Required: headers. Currently,
	  chan_sip only parses the first Supported/Required header it finds. This patch
	  adds support for multiple Supported/Required headers for INVITE requests.

	  Review: https://reviewboard.asterisk.org/r/2478

	  ASTERISK-21721 #close
	  Reported by: Olle Johansson
	  patches:
	    rb2478.patch uploaded by oej (License 5267)
	  ........

	  Merged revisions 426594 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 426595 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426596 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426597 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426598 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-29 08:02 +0000 [8a69aedd17]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Fix building chan_phone on big endian systems

	  A left over from the formats conversion (Corey Farrell).

	  ASTERISK-24458 #close
	  Review: https://reviewboard.asterisk.org/r/4117/

	  ........

	  Merged revisions 426570 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426573 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 16:35 +0000 [0ed8aebda9]  Richard Mudgett <rmudgett@digium.com>

	* bridge_builtin_features: Add missing channel locks around ast_get_chan_features_general_config().

	  The feature_automonitor() and feature_automixmonitor() functions were not
	  locking the channel around ast_get_chan_features_general_config().
	  Accessing the channel datastore list without the channel locked is a good
	  way to corrupt the list or follow the pointer chain into oblivion.
	  ........

	  Merged revisions 426531 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426552 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426553 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 16:10 +0000 [7205d76d7d]  Corey Farrell <git@cfware.com>

	* res_fax: Resolve T38 gateway frame leak.

	  When frames are translated by a fax gateway they need to be freed.  The
	  existing call to ast_frfree was unreachable.  This change reorganizes
	  fax_gateway_framehook to ensure that ast_frfree is called when needed.

	  ASTERISK-24457 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4115/
	  ........

	  Merged revisions 426527 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426528 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426529 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426530 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 15:44 +0000 [67e496c275]  Corey Farrell <git@cfware.com>

	* manager: Unsubscribe from acl_change_sub at shutdown.

	  ASTERISK-24453 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4110/
	  ........

	  Merged revisions 426524 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426525 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426526 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 13:09 +0000 [1fe22c411d]  Malcolm Davenport <malcolmd@digium.com>

	* ASTERISK-23512, correct inaccurate comment in manager.conf.sample

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426462 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 11:41 +0000 [8e9f593e3a]  Matt Jordan <mjordan@digium.com>

	* main/bridge: Destroy features struct on off nominal path during bridge impart

	  When a channel is imparted to a bridge, the invocation of the function may
	  provide an ast_bridge_features struct. Upon passing this to ast_bridge_impart,
	  the caller must assume that ownership has passed to the function, as in all
	  paths the function destroys the struct prior to returning (as its purpose is
	  to configure the behavior of the channel while in the bridge). On one off
	  nominal path - where the channel already has a PBX thread - the struct was not
	  being destroyed.

	  This patch fixes that glitch.

	  ASTERISK-24437 #close
	  Reported by: Scott Griepentrog
	  ........

	  Merged revisions 426431 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426432 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426433 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 09:59 +0000 [f4b4d42630]  Matt Jordan <mjordan@digium.com>

	* main/manager: Fix typo in AMI event documentation of "OriginateResponse"

	  The parameter name is "Response", not "Resonse".

	  ASTERISK-24430 #close
	  Reported by: Dafi Ni
	  ........

	  Merged revisions 426366 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426367 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426368 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426369 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 09:57 +0000 [68d9872f58]  Malcolm Davenport <malcolmd@digium.com>

	* ASTERISK-24323, fix bug in documentation of AGI STREAM FILE CONTROL

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426365 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 08:13 +0000 [684b8762a9]  Malcolm Davenport <malcolmd@digium.com>

	* ASTERISK-24419, fix incorrect syntax for setting language in extensions.conf.sample

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426297 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 06:22 +0000 [2290393273]  Corey Farrell <git@cfware.com>

	* app_queue: Cleanup ao2_iterator

	  Clean ao2_iterator, resolving reference leak to queue members.

	  ASTERISK-24454 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4111/
	  ........

	  Merged revisions 426255 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426260 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426266 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426272 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-28 06:12 +0000 [ab16f46139]  Corey Farrell <git@cfware.com>

	* func_cdr: Fix CDR_PROP payload leak

	  Remove duplicate allocation of payload, preventing leak.

	  ASTERISK-24455 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4113/
	  ........

	  Merged revisions 426252 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426253 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-27 12:55 +0000 [ef8cdd40e5]  Sean Bright <sean@malleable.com>

	* configure: Add autoconf check for libopus.

	  Because opus transcoding support cannot be included in the standard Asterisk
	  distribution, a few codec_opus implementations have popped up.  To make it
	  easier for people to drop in opus support in their own installations, this
	  patch adds configure checks for libopus.

	  Review: https://reviewboard.asterisk.org/r/4106/
	  ........

	  Merged revisions 426234 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426235 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-26 21:47 +0000 [5a17878085]  Matt Jordan <mjordan@digium.com>

	* res/res_http_websocket: Fix minor nits found by wdoekes on r409681

	  When Moises committed the fixes for WSS (which was a great patch), wdoekes had
	  a few style nits that were on the review that got missed. This patch resolves
	  what I *think* were all of the ones that were still on the review.

	  Thanks to both moy for the patch, and wdoekes for the reviews.

	  Review: https://reviewboard.asterisk.org/r/3248/
	  ........

	  Merged revisions 426209 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426210 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426211 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426212 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-26 21:27 +0000 [62bee9b327]  Matt Jordan <mjordan@digium.com>

	* res/res_phoneprov: Fix crash on shutdown caused by container cleanup

	  In res_phoneprov, unloading the module first destroys the http_routes
	  container, followed by the users. However, users may have a route in
	  the http_routes container; the validity of this container is not checked
	  in the users destructor. Hence, we hit an assert as the container has already
	  been set to NULL.

	  This patch does two things:
	  (1) It adds a sanity check in the user destructor (because why not)
	  (2) It switches the order of destruction, so that users are disposed of prior
	      to the HTTP routes they may hold a reference to.

	  Note that this crash was caught by the Test Suite (go go testing!)
	  ........

	  Merged revisions 426174 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426176 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426179 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-26 20:47 +0000 [130a3fcd7f]  Matt Jordan <mjordan@digium.com>

	* res/res_srtp: Fix include issue for libsrtp 1.5.0

	  In libsrtp 1.5.0, crypto_get_random is no longer resolved simply by including
	  srtp.h. Now, one must include crypto_kernel.h as well. As it turns out, this
	  header file has been provided by the library since 2006, so this is a
	  relatively benign change.

	  ASTERISK-24436 #close
	  Reported by: Patrick Laimbock
	  ........

	  Merged revisions 426140 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 426141 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 426142 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 426143 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426144 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-24 10:32 +0000 [c084728690]  Jonathan Rose <jrose@digium.com>

	* Documentation: Improve documentation for ExtensionStatus AMI events

	  Review: https://reviewboard.asterisk.org/r/4085/
	  ........

	  Merged revisions 426120 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426121 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-22 16:41 +0000 [c4d7e7e270]  Shaun Ruffell <sruffell@digium.com>

	* codec_dahdi: Cannot use struct ast_translator.core_{src,src}_codec.

	  This fixes a Segmentation fault introduced in r419044 "media formats: re-architect
	  handling of media for performance improvements".

	  The problem is that codec_dahdi was using core_src_codec and core_dst_codec in the
	  ast_translator structure when these fields were never set. Now instead of trying to map
	  the new core codec descriptions to the way DAHDI defines different codecs, we will store
	  the DAHDI specific formats in 'struct translator' directly so we can refer to them without
	  mapping.

	  This also allows us to remove the "global_format_map" structure, since we can now query
	  the list of translators directly to make sure we do not ever register a DAHDI based
	  translator for a specific path more than once and eliminate the need to keep the list and
	  the map in sync.

	  ASTERISK-24435 #close
	  Reported by: Marian Koniuszko

	  Review: https://reviewboard.asterisk.org/r/4105/
	  ........

	  Merged revisions 426097 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426099 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-21 13:04 +0000 [2165868be7]  Richard Mudgett <rmudgett@digium.com>

	* translage.c: Fix regression when generating translation path strings.

	  Fix the AMI Status action read and write translation path strings from
	  growing for each channel in the status event list by reseting the ast
	  string given to ast_translate_path_to_str() to fill in the given
	  translation path.
	  ........

	  Merged revisions 426079 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426080 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-20 09:20 +0000 [dad0334cf1]  abelbeck <lonnie@abelbeck.com> (License 5903),Matt Jordan <mjordan@digium.com> (License 6283)

	* AST-2014-011: Fix POODLE security issues

	  There are two aspects to the vulnerability:
	  (1) res_jabber/res_xmpp use SSLv3 only. This patch updates the module to use
	      TLSv1+. At this time, it does not refactor res_jabber/res_xmpp to use the
	      TCP/TLS core, which should be done as an improvement at a latter date.
	  (2) The TCP/TLS core, when tlsclientmethod/sslclientmethod is left unspecified,
	      will default to the OpenSSL SSLv23_method. This method allows for all
	      ecnryption methods, including SSLv2/SSLv3. A MITM can exploit this by
	      forcing a fallback to SSLv3, which leaves the server vulnerable to POODLE.
	      This patch adds WARNINGS if a user uses SSLv2/SSLv3 in their configuration,
	      and explicitly disables SSLv2/SSLv3 if using SSLv23_method.

	  For TLS clients, Asterisk will default to TLSv1+ and WARN if SSLv2 or SSLv3 is
	  explicitly chosen. For TLS servers, Asterisk will no longer support SSLv2 or
	  SSLv3.

	  Much thanks to abelbeck for reporting the vulnerability and providing a patch
	  for the res_jabber/res_xmpp modules.

	  Review: https://reviewboard.asterisk.org/r/4096/

	  ASTERISK-24425 #close
	  Reported by: abelbeck
	  Tested by: abelbeck, opsmonitor, gtjoseph
	  patches:
	    asterisk-1.8-jabber-tls.patch uploaded by abelbeck (License 5903)
	    asterisk-11-jabber-xmpp-tls.patch uploaded by abelbeck (License 5903)
	    AST-2014-011-1.8.diff uploaded by mjordan (License 6283)
	    AST-2014-011-11.diff uploaded by mjordan (License 6283)
	  ........

	  Merged revisions 425987 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425991 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426003 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-19 12:09 +0000 [5e10e369b1]  gtjoseph <george.joseph@fairview5.com>

	* build: Force -fsigned-char on platforms where the default for char is unsigned

	  gcc on the ARM platform defaults 'char' to 'unsigned char' whereas Intel and
	  SPARC default to 'signed char'.  This is only an issue in the rare cases where
	  negative values are assigned to a 'char' but this this patch insures
	  compatibility by detecting platforms that default to 'unsigned' and adding an
	  '-fsigned-char' flag to _ASTCFLAGS.

	  If compiling for ARM (native or cross-compile) be sure to run ./bootstrap.sh
	  and ./configure to regenerate the build files.  You shouldn't have to do this
	  for Intel or SPARC.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4091/
	  ........

	  Merged revisions 425964 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425965 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425966 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-18 23:03 +0000 [404b6ab3ab]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_sdp_rtp: Revert 425924

	  This patch for r425924 introduced a bug, wherein sending an INVITE request
	  with no SDP would cause Asterisk to not send an SDP Offer in the 200
	  OK. The current structure of res_pjsip_sdp_rtp is a bit hard to deal with
	  to fix this, as create_outgoing_sdp has no knowledge of whether or not it is
	  creating an SDP as a new Offer or an Answer. This is something of an oversight
	  in the callback definition, as the caller of it does have this information.



	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425945 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-18 19:56 +0000 [b263c8bdae]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_sdp_rtp: Remove left over reference to override_prefs

	  The usage of the local override_prefs variable in create_outgoing_sdp_stream
	  was previously to track an override format preference set by PJSIP_MEDIA_OFFER.
	  Now, however, that function simply sets the joint capabilities structure,
	  session->req_caps. During the media format rework, the override_prefs was
	  instead used to check if there were any formats in session->req_caps.

	  However, this usage isn't useful in create_outgoing_sdp_stream.
	  session->req_caps contains the negotiated formats for *all* streams, not just
	  the current one being created. Thus, so long as any stream of any type has
	  provided a format, override_prefs will be non-zero. Hence, its usage in
	  checking whether or not we should look at the formats on the endpoint or
	  the joint capabilities is generally useless.

	  There's only two things useful to check:
	  (1) Does the endpoint have a format for the media type?
	  (2) Did we negotiate a format for the media type?

	  If either of those is a 'no', then we must kill the media stream.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425924 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-17 17:45 +0000 [b8f687f27c]  Jonathan Rose <jrose@digium.com>

	* Sample Configurations: make 'pjsip reload' reload all reloadable pjsip modules

	  AST-1432 #close
	  Reported by: John Bigelow
	  ........

	  Merged revisions 425905 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425906 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-17 08:35 +0000 [8f58592252]  Matt Jordan <mjordan@digium.com>

	* res_pjsip_session/res_pjsip_sdp_rtp: Be more tolerant of offers

	  When an inbound SDP offer is received, Asterisk currently makes a few
	  incorrection assumptions:

	  (1) If the offer contains more than a single audio/video stream, Asterisk will
	      reject the entire stream with a 488. This is an overly strict response;
	      generally, Asterisk should accept the media streams that it can accept and
	      decline the others.
	  (2) If the offer contains a declined media stream, Asterisk will attempt to
	      process it anyway. This can result in attempting to match format
	      capabilities on a declined media stream, leading to a 488. Asterisk should
	      simply ignore declined media streams.
	  (3) Asterisk will currently attempt to handle offers with AVPF with
	      use_avpf=No/AVP with use_avpf=Yes. This mismatch results in invalid SDP
	      answers being sent in response. If there is a mismatch between the media
	      type being offered and the configuration, Asterisk must reject the offer
	      with a 488.

	  This patch does the following:
	  * Asterisk will accept SDP offers with at least one media stream that it can
	    use. Some WARNING messages have been dropped to NOTICEs as a result.
	  * Asterisk will not accept an offer with a media type that doesn't match its
	    configuration.
	  * Asterisk will ignore declined media streams properly.

	  #SIPit31

	  Review: https://reviewboard.asterisk.org/r/4063/

	  ASTERISK-24122 #close
	  Reported by: James Van Vleet

	  ASTERISK-24381 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 425868 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425879 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425881 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-17 08:17 +0000 [0d0e38a0e1]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_keepalive: Add runtime configurable keepalive module for connection-oriented transports.

	  This change adds a module which is configurable using the keep_alive_interval setting in the
	  global section that will send a CRLF keep alive to all active connection-oriented transports at
	  the provided interval. This is useful because it can help keep connections open through NATs.
	  This functionality also exists within PJSIP but can not be controlled at runtime and requires
	  recompiling it.

	  Review: https://reviewboard.asterisk.org/r/4084/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425825 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-17 08:11 +0000 [86eea19c8f]  Damian Ivereigh (License 6632)

	* channels/chan_sip: Respect outboundproxy setting when sending qualify requests

	  The outboundproxy setting is currently ignored when sending OPTIONS requests
	  as a result of the qualify setting. This means that if an Asterisk server is
	  unable to send the packet directly to a peer, it is unable to qualify any
	  non-inbound registered peer (e.g. a peer SIP Trunk).

	  This patch grabs the outboundproxy information for a peer when a qualify
	  attempt is being constructed and, if it finds the information, uses it
	  when sending the OPTIONS request.

	  Review: https://reviewboard.asterisk.org/r/3948

	  ASTERISK-24063 #close
	  Reported by: Damian Ivereigh
	  patches:
	    outboundproxy-dai.patch uploaded by Damian Ivereigh (License 6632)
	  ........

	  Merged revisions 425818 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 425819 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425820 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425821 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425822 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-17 06:30 +0000 [7144c739e9]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add 'user_eq_phone' option to add a 'user=phone' parameter when applicable.

	  This change adds a configuration option which adds a 'user=phone' parameter if the user
	  portion of the request URI or the From URI is determined to be a number.

	  Review: https://reviewboard.asterisk.org/r/4073/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425804 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-16 21:49 +0000 [f91cb1207c]  Richard Mudgett

	* AMI: Add missing VarSet events when a channel inherits variables.

	  There should be AMI VarSet events when channel variables are inherited by
	  an outgoing channel.  Also local;2 should generate VarSet events when it
	  gets all of its channel variables from channel local;1.

	  ASTERISK-24415 #close
	  Reported by: Richard Mudgett
	  Patches:
	        jira_asterisk_24415_v12.patch (license #5621) patch uploaded by Richard Mudgett

	  Review: https://reviewboard.asterisk.org/r/4074/
	  ........

	  Merged revisions 425782 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425783 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425784 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-16 21:01 +0000 [df59a71b83]  Matt Jordan <mjordan@digium.com>

	* bridge_native_rtp: Fix audio issues when moving from remote bridge to softmix

	  When a native RTP bridge that is remotely bridging its participants switches
	  to a softmix bridge, it may not properly re-INVITE the media for one or both
	  participants back to Asterisk. This is due to the current bridge_native_rtp
	  code only re-INVITEs if it believes the channel will survive the bridge
	  operation. Currently, that code is failing, as it expects the channels to
	  have a soft hangup flag set on it indicating that a redirect has occurred
	  or that the channel is going to leave the bridge. (The code did not take into
	  account a smart bridge operation).

	  This patch also renames a few things to be more reflective of the underlying
	  types.

	  Review: https://reviewboard.asterisk.org/r/3997/

	  ASTERISK-24327 #close
	  ........

	  Merged revisions 425760 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425761 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425762 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-16 20:46 +0000 [2ccbdd2624]  Matt Jordan <mjordan@digium.com>

	* test_cel: Update pickup test to expect CANCEL instead of ANSWSER

	  The CEL pickup test previously looked for a disposition of ANSWER between the
	  original caller/peer when the call is picked up. This is actually incorrect:
	  the disposition should, at the very least, not be ANSWER as the call was
	  never ANSWERed. The disposition is now CANCEL; this patch updates the test
	  accordingly.
	  ........

	  Merged revisions 425757 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425758 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425759 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-16 16:21 +0000 [873d956144]  Matt Jordan <mjordan@digium.com>

	* main/cdr: Use 'time' when rescheduling batched CDRs as opposed to 'size'

	  When refactoring CDRs to use the configuration framework, a 'whoops' was
	  introduced where the CDR batch size was used when rescheduling a batch,
	  as opposed to the time duration. This patch corrects that obvious mistake.

	  ASTERISK-24426 #close
	  Reported by: Shane Blaser
	  ........

	  Merged revisions 425735 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425736 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425744 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-16 12:32 +0000 [c2ec5f0f6f]  gtjoseph <george.joseph@fairview5.com>

	* config: Fix inf loop using ast_category_browse and ast_variable_retrieve

	  Fix infinite loop when calling ast_variable_retrieve inside an
	  ast_category_browse loop when there is more than 1 category with
	  the same name.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4089/
	  ........

	  Merged revisions 425713 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425714 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425715 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-16 11:32 +0000 [86a4ce4957]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Enforce module load dependencies

	  This enforces that res_pjsip, res_pjsip_session, and res_pjsip_pubsub
	  have loaded properly before attempting to load any modules that depend
	  on them since the module loader system is not currently capable of
	  resolving module dependencies on its own.

	  ASTERISK-24312 #close
	  Reported by: Dafi Ni
	  Review: https://reviewboard.asterisk.org/r/4062/
	  ........

	  Merged revisions 425690 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425691 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425700 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-16 01:22 +0000 [a770ca168d]  Igor Goncharovskiy <igor.goncharovsky@gmail.com>

	* 
	  Fix loss of voice after second call drops (on a second line) in case using multiple lines on unistim phones. There is regression was introduced in r391379.

	  Reported by: Rustam Khankishyiev
	  (closes issue ASTERISK-23846)
	  ........

	  Merged revisions 425667 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425668 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425669 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425677 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-15 20:26 +0000 [bfee1b4bc5]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Fix a bug where ICE state would get reset when it shouldn't.

	  In the case where the ICE negotiation had not yet started current state would
	  get wiped when it shouldn't.

	  This also removes channel binding as in practice this does not work well with
	  other implementations.
	  ........

	  Merged revisions 425644 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425645 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425646 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425647 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-15 14:39 +0000 [28c11fff78]  Richard Mudgett <rmudgett@digium.com>

	* chan_motif: Cleanup jingle_tech.capabilities only once.
	  ........

	  Merged revisions 425627 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425628 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-15 14:17 +0000 [3d58066de9]  Jonathan Rose <jrose@digium.com>

	* parking_tests: Fix assertions and possibly crashes in res_parking unit tests

	  Assertions were caused by attempting to play music on hold to a channel with
	  no formats. Parking unit test channels were given formats and a technology so
	  that they would be able to pretend to read/write frames.

	  ASTERISK-24413 #close
	  Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/4075/
	  ........

	  Merged revisions 425611 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425613 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-15 05:03 +0000 [90c98d384b]  Alexandr Anikin <may@telecom-service.ru>

	* chan_ooh323: fix rtptimeout general value checking

	  correct condition to check rtptimeout in [general] config section

	  ASTERISK-24393 #close
	  Reported by:  Dmitry Melekhov
	  Tested by:  Dmitry Melekhov
	  Patches:
	    ASTERISK-24393.patch
	  ........

	  Merged revisions 425547 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 425548 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425589 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425590 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425591 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-14 15:48 +0000 [104fca5001]  gtjoseph <george.joseph@fairview5.com>

	* config: Fix SEGV in unit test with MALLOC_DEBUG

	  With MALLOC_DEBUG the /main/config config_basic_ops test was causing a
	  SEGV while doing an ast_category_delete in an ast_category_browse loop.
	  Apparently this never worked but was also never tested.  I removed the
	  test, added 2 notes to config.h indicating that it's not supported and
	  added a few lines of code to ast_category_delete to prevent the SEGV
	  should someone attempt it in the future.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4078/
	  ........

	  Merged revisions 425525 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425526 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425527 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-14 14:12 +0000 [87b5006ff0]  Jonathan Rose <jrose@digium.com>

	* Scheduler: Fix a nasty scheduler caching bug which makes new tasks not execute

	  Tasks that were marked for pending deletion in the scheduler would be moved to
	  the cache for later reuse, but after being recycled the deleted mark wouldn't
	  be removed resulting in fresh tasks being deleted without reason... and
	  immediately moved back into the cache where they could be reused again. This
	  could cause horrendous things to happen in just about anything that used a
	  scheduler.

	  ASTERISK-24321 #close
	  Reported by: Steve Pitts
	  Review: https://reviewboard.asterisk.org/r/4071/
	  ........

	  Merged revisions 425503 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425504 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425505 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-14 13:13 +0000 [527b58aeb7]  gtjoseph <george.joseph@fairview5.com>

	* res_phoneprov: Create accessor for ast_phoneprov_std_variable_lookup

	  Based on feedback from Richard, I created an accessor for
	  res_phoneprov/ast_phoneprov_std_variable_lookup and added
	  load priority to AST_MODULE_INFO.

	  Tested-by: George Joseph
	  Tested-by: Richard Mudgett

	  Review: https://reviewboard.asterisk.org/r/4076/
	  ........

	  Merged revisions 425480 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425481 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425482 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-14 11:47 +0000 [fbb19db0c8]  Corey Farrell <git@cfware.com>

	* res_fax: Fix reference leak caused by gateway sessions

	  Fax gateway session objects can be re-used, causing the
	  same gateway session to be added to faxregistry.container
	  more than once.  This change causes fax_session_new to
	  remove the reserved session from the container before
	  it's id is changed, ensuring it's possible for the
	  session to be freed.

	  ASTERISK-24392 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4049/
	  ........

	  Merged revisions 425457 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425458 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425459 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425460 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-14 11:43 +0000 [c61b66e107]  Richard Mudgett <rmudgett@digium.com>

	* stasis_channels.c: Resolve unfinished Dials when doing masquerades (Part 2)

	  Masquerades into and out of channels that are involved in a dial operation
	  don't create the expected dial end event.  The missing dial end event goes
	  against the model for things like CDRs and generating Dial end manager
	  actions and such.

	  There are four cases:

	  1) A channel masquerades into the caller channel.  The case happens when
	  performing a blonde transfer using the channel driver's protocol.

	  2) A channel masquerades into a callee channel.  The case happens when
	  performing a directed call pickup.

	  3) The caller channel masquerades out of dial.  The case happens when
	  using the Bridge application on the caller channel.

	  4) A callee channel masquerades out of dial.  The case happens when using
	  the Bridge application on a peer channel.

	  As it turned out, all four cases need to be handled instead of just the
	  first one.

	  ASTERISK-24237
	  Reported by: Richard Mudgett

	  ASTERISK-24394 #close
	  Reported by: Richard Mudgett

	  Review: https://reviewboard.asterisk.org/r/4066/
	  ........

	  Merged revisions 425430 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425455 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425456 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-14 11:20 +0000 [01bdc80475]  Corey Farrell <git@cfware.com>

	* res_fax: Resolve module reference leak caused by reserved sessions

	  Remove reference to module providing reserved session after
	  adding a reference to the final module.  This re-reference
	  is done to ensure that module references are correct even
	  if the final session selects a different module than the
	  reserved session.

	  ASTERISK-18923 #close
	  Reported by: Grigoriy Puzankin
	  Review: https://reviewboard.asterisk.org/r/4048/
	  ........

	  Merged revisions 425405 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 425407 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425411 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425415 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425419 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-13 11:12 +0000 [c7e6b6ba3d]  gtjoseph <george.joseph@fairview5.com>

	* manager/config: Support templates and non-unique category names via AMI

	  This patch provides the capability to manipulate templates and categories
	  with non-unique names via AMI.

	  Summary of changes:

	  GetConfig and GetConfigJSON: Added "Filter" parameter:  A comma separated list
	  of name_regex=value_regex expressions which will cause only categories whose
	  variables match all expressions to be considered.  The special variable name
	  TEMPLATES can be used to control whether templates are included.  Passing
	  'include' as the value will include templates along with normal categories.
	  Passing 'restrict' as the value will restrict the operation to ONLY templates.
	  Not specifying a TEMPLATES expression results in the current default behavior
	  which is to not include templates.

	  UpdateConfig: NewCat now includes options for allowing duplicate category
	  names, indicating if the category should be created as a template, and
	  specifying templates the category should inherit from.  The rest of the
	  actions now accept a filter string as defined above.  If there are non-unique
	  category names, you can now update specific ones based on variable values.

	  To facilitate the new capabilities in manager, corresponding changes had to be
	  made to config, most notably the addition of filter criteria to many of the
	  APIs.  In some cases it was easy to change the references to use the new
	  prototype but others would have required touching too many files for this
	  patch so a wrapper with the original prototype was created.  Macros couldn't
	  be used in this case because it would break binary compatibility with modules
	  such as res_digium_phone that are linked to real symbols.

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4033/
	  ........

	  Merged revisions 425383 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425384 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425385 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-12 16:09 +0000 [8d6f1d763c]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Make the ICE transport check case insensitive as some implementations use 'udp'.
	  ........

	  Merged revisions 425360 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425361 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425362 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425363 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-12 03:17 +0000 [9e72c74db5]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Fix so asterisk won't send reINVITE after a BYE.

	  After a reINVITE glare situation, Asterisk would re-send the reINVITE
	  even though the call had been hung up in the mean time.  This patch
	  unschedules the reinvite when handling the BYE.

	  ASTERISK-22791 #close
	  Reported by: Paolo Compagnini
	  Tested by: Paolo Compagnini

	  Review: https://reviewboard.asterisk.org/r/4056/
	  (testcase is in review r4055)
	  ........

	  Merged revisions 425296 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 425297 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425298 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425299 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425300 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-12 02:57 +0000 [c0ac874106]  Walter Doekes <walter+asterisk@wjd.nu>

	* build: Relax badshell tilde test to allow for ~ in middle of DESTDIR.

	  The main Makefile has a target test called 'badshell' that tests if
	  DESTDIR does not happen to have an an-expanded tilde (~).  This might
	  be the case if you run: make install DESTDIR=~/somewhere/

	  That test also disallowed valid tildes in directory names. The test is
	  now changed to only trigger on a tilde at the start of the path.

	  ASTERISK-13797 #close
	  Reported by: Tzafrir Cohen

	  Review: https://reviewboard.asterisk.org/r/4064/
	  ........

	  Merged revisions 425291 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 425292 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425293 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425294 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425295 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-12 02:47 +0000 [2a03efdbae]  Walter Doekes <walter+asterisk@wjd.nu>

	* res_calendar_ews: Relax neon version check to work with 0.30 too.

	  Allow res_calendar_ews to work not only with libneon-0.29 but also
	  with 0.30.

	  ASTERISK-24325 #close
	  Reported by: Tzafrir Cohen

	  Review: https://reviewboard.asterisk.org/r/4068/
	  ........

	  Merged revisions 425286 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 425287 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425288 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425289 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425290 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-11 16:09 +0000 [6a3c11c75b]  gtjoseph <george.joseph@fairview5.com>

	* res_phoneprov: Cleanup module load error handling

	  Tested module load/reload interaction between res_phoneprov and
	  res_pjsip_phoneprov_provider in cases where res_phoneprov didn't
	  load correctly (usually misconfiguration or missing phoneprov.conf)

	  Tested-by: George Joseph

	  Review: https://reviewboard.asterisk.org/r/4069/
	  ........

	  Merged revisions 425264 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425265 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425266 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-10 15:48 +0000 [98d5b7090d]  Joshua Colp <jcolp@digium.com>

	* bridge: During a smart bridge operation provide a more complete bridge to the old technology.

	  When a smart bridge operation occurs and a bridge transitions from one
	  technology to another the old technology is provided the channels formerly
	  in it and told that they are leaving. Unfortunately the bridge provided
	  along with them is incomplete. The bridge, despite there being channels in it,
	  contains none. This forces technology implementations to have additional
	  logic when channels are leaving or to store their own duplicated
	  state.

	  This change makes the bridge more complete so it contains the expected
	  channels. Now that the bridge is complete special logic within
	  bridge_native_rtp is no longer needed and has been removed.

	  Review: https://reviewboard.asterisk.org/r/4057/
	  ........

	  Merged revisions 425242 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425243 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425244 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-10 09:31 +0000 [c3ff212cae]  Matt Jordan <mjordan@digium.com>

	* res/res_phoneprov: Bail on registration if res_phoneprov didn't load

	  If res_phoneprov failed to fully load (due to not being configured), the
	  providers container will be NULL. If a module attempts to register a phone
	  provisioning provider, it should check for the presence of the container.
	  If there is no providers container, it should return an error.

	  This patch makes the ast_phoneprov_provider_register function do that...
	  otherwise this would be a silly commit message.
	  ........

	  Merged revisions 425220 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425221 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425222 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-10 09:24 +0000 [c46100ad5f]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_phoneprov_provider: Add missing dependency on pjproject.
	  ........

	  Merged revisions 425216 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425217 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425218 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-10 08:03 +0000 [37b5f52da7]  Kinsey Moore

	* CallerID: Fix parsing regression

	  This fixes a regression in callerid parsing introduced when another bug
	  was fixed. This bug occurred when the name was composed entirely of
	  DTMF keys and quoted without a number section (<>). 

	  ASTERISK-24406 #close
	  Reported by: Etienne Lessard
	  Tested by: Etienne Lessard
	  Patches:
	      callerid_fix.diff uploaded by Kinsey Moore
	  Review: https://reviewboard.asterisk.org/r/4067/
	  ........

	  Merged revisions 425152 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 425153 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425154 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425155 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425156 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-10 07:10 +0000 [0ef680cff0]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_nat: Place source port into rport of responses if 'force_rport' is on.

	  When the 'force_rport' option is enabled the behavior should be the same
	  as if the remote side placed rport into the message themselves. Therefore
	  any responses we send should include the source port of the request in the
	  rport of the Via header.

	  #SIPit31

	  ASTERISK-24387 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 425131 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425132 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425133 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-10 02:34 +0000 [d3f525fd8f]  Torrey Searle (License #5334),Nitesh Bansal (License #6418)

	* chan_sip: Fix dialog leak resulting from missing ACK to re-INVITE.

	  If a device re-INVITEs at the same time as the dialog is hung up, and
	  if then the ACK to the re-INVITE never reaches Asterisk, chan_sip would
	  fail to destroy the dialog after a while.  This resulted in (most
	  prominently) file handle leaks.

	  (Patch reindented by me.)

	  ASTERISK-20784 #close
	  ASTERISK-15879 #close
	  Reported by: Torrey Searle, Nitesh Bansal
	  Patches:
	    reinvite_ack_timeout.patch uploaded by Torrey Searle (License #5334)
	    patch_asterisk_20784.txt uploaded by Nitesh Bansal (License #6418)

	  Reviewboard: https://reviewboard.asterisk.org/r/4052/
	  (testcase can be found at r4051)
	  ........

	  Merged revisions 425068 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 425069 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 425070 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425071 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425072 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-09 18:37 +0000 [aef63118da]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_phoneprov_provider: fix compile breakage on AST_VECTOR

	  endpoint->inbound_auths was changed to a vector in 13 and I
	  committed the 12 patch instead of the 13 patch.

	  Tested-by: George Joseph
	  ........

	  Merged revisions 425052 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425053 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-09 16:39 +0000 [6fc4df7279]  Kevin Harwell <kharwell@digium.com>

	* res_rtp_asterisk: Crash if no candidates received for component

	  When starting ice if there is not at least one remote ice candidate with an RTP
	  component asterisk will crash. This is due to an assertion in pjnath as it
	  expects at least one candidate with an RTP component. Added a check to make
	  sure at least one candidate contains an RTP component and at least one candidate
	  has an RTCP component.

	  ASTERISK-24383 #close
	  Review: https://reviewboard.asterisk.org/r/4039/
	  ........

	  Merged revisions 425031 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425032 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-09 15:55 +0000 [c6837c236f]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip_phoneprov_provider: Provides pjsip integration with res_phoneprov

	  This module allows res_pjsip to integrate with res_phoneprov.  It handles
	  the pjsip 'phoneprov' object type.

	  Tested-by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3976/
	  ........

	  Merged revisions 425007 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 425008 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425009 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-09 13:44 +0000 [3a187aa14a]  Matt Jordan <mjordan@digium.com>

	* res/res_phoneprov: Don't cancel Asterisk load on module load failure
	  ........

	  Merged revisions 424985 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424986 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424987 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-09 12:46 +0000 [cc595f7353]  gtjoseph <george.joseph@fairview5.com>

	* res_phoneprov: Refactor phoneprov to allow pluggable config providers

	  This patch makes res_phoneprov more modular so other modules (like pjsip)
	  can provide configuration information instead of res_phoneprov relying solely
	  on users.conf and sip.conf.  To accomplish this a new ast_phoneprov public API
	  is now exposed which allows config providers to register themselves, set
	  defaults (server profile, etc) and add user extensions.

	  * ast_phoneprov_provider_register registers the provider and provides callbacks
	    for loading default settings and loading users.
	  * ast_phoneprov_provider_unregister clears the defaults and users.
	  * ast_phoneprov_add_extension should be called once for each user/extension
	    by the provider's load_users callback to add them.
	  * ast_phoneprov_delete_extension deletes one extension.
	  * ast_phoneprov_delete_extensions deletes all extensions for the provider.

	  Tested-by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3970/
	  ........

	  Merged revisions 424963 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424964 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424965 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-09 11:38 +0000 [0f50e8856b]  Richard Mudgett <rmudgett@digium.com>

	* cdr.c: Make turning on CDR debug a one step process instead of two.

	  Now "cdr set debug on" doesn't also require "core set verbose 1" to see
	  CDR debug output.
	  ........

	  Merged revisions 424941 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424942 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424943 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-09 03:10 +0000 [d0255c4a46]  Michael Myles (License #6626)

	* safe_asterisk: Don't automatically exceed MAXFILES value of 2^20.

	  On systems with lots of RAM (e.g. 24GB) /proc/sys/fs/file-max divided
	  by two can exceed the per-process file limit of 2^20. This patch
	  ensures the value is capped.

	  (Patch cleaned up by me.)

	  ASTERISK-24011 #close
	  Reported by: Michael Myles
	  Patches:
	    safe_asterisk-ulimit.diff uploaded by Michael Myles (License #6626)
	  ........

	  Merged revisions 424875 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 424878 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 424879 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424880 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424881 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-08 13:47 +0000 [8b0089ea1d]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Allow only UDP ICE candidates.

	  The underlying library, pjnath, that res_rtp_asterisk uses for ICE
	  support does not have support for ICE-TCP. As candidates are
	  passed through directly to it this can cause error messages to occur
	  when it receives something unexpected (such as a TCP candidate).
	  This change merely ignores all non-UDP candidates so they never
	  reach pjnath.

	  ASTERISK-24326 #close
	  Reported by: Joshua Colp
	  ........

	  Merged revisions 424852 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 424853 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424854 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424855 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-08 13:24 +0000 [5e50638539]  Kinsey Moore <kmoore@digium.com>

	* Stasis: Relegate log message to dev-mode

	  This error message primarily applies to development tasks and will now
	  only show up when dev-mode is enabled via configure.
	  ........

	  Merged revisions 424850 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424851 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-08 09:54 +0000 [3dfc485e35]  Kinsey Moore <kmoore@digium.com>

	* Indexer: Format message types may not exist

	  In Asterisk 13+, any given message type is not guaranteed to exist even
	  if Asterisk comes up correctly since creation of the message type could
	  be declined. The indexer should not prevent Asterisk from starting
	  under these conditions.
	  ........

	  Merged revisions 424833 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424834 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-07 15:33 +0000 [d8bbf1ec1d]  Kinsey Moore <kmoore@digium.com>

	* Stasis: Only log errors for non-declined types

	  When message type creation is declined via stasis.conf, certain
	  operations log errors assuming that the declined type is being used
	  before initialization or after destruction. These error messages get
	  quite spammy for oft used message types and should not be logged in the
	  first place since the message type is validly NULL.

	  Reported by: Matt DiMeo
	  ........

	  Merged revisions 424769 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424770 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-07 13:34 +0000 [f7225da08a]  Joshua Colp <jcolp@digium.com>

	* data: Properly access formats in capabilities structure when adding codecs.

	  Formats within a capabilities structure are addressed starting at 0, not 1.
	  Assuming 1 causes it to exceed an array.

	  ASTERISK-24389 #close
	  Reported by: Kevin Harwell
	  ........

	  Merged revisions 424752 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424753 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-07 12:44 +0000 [a9011106b6]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_outbound_registration: Initialize auth_reject_permanent parameter

	  Prior to this patch, the auth_reject_permanent parameter was not initialized on
	  the registration client state, leading to the parameter being disabled
	  regardless of the value specified in pjsip.conf.

	  This patch initialized the setting on the registration client state to the
	  provided configuration value.

	  ASTERISK-24398 #close
	  ........

	  Merged revisions 424730 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424731 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424732 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-07 09:09 +0000 [523da7d1b3]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_pubsub: Fix typo in WARNING message
	  ........

	  Merged revisions 424713 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424714 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-06 13:39 +0000 [39bd5b7a70]  Peter Katzmann (License 5968)

	* message: Don't close an AMI connection on SendMessage action error

	  If SendMessage encounters an error (such as incorrect input provided to the
	  action), it will currently return -1. Actions should only return -1 if the
	  connection to the AMI client should be closed. In this case, SendMessage
	  causing the client to disconnect is inappropriate.

	  This patch causes the action to return 0, which simply causes the action to
	  fail.

	  Review: https://reviewboard.asterisk.org/r/4024

	  ASTERISK-24354 #close
	  Reported by: Peter Katzmann
	  patches:
	    sendMessage.patch uploaded by Peter Katzmann (License 5968)
	  ........

	  Merged revisions 424690 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 424691 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424692 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424693 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-06 10:41 +0000 [c384532aa4]  Richard Mudgett <rmudgett@digium.com>

	* features.c: Fix lingering channel ref while Bridge() application is active.

	  Using the Bridge application to bridge a channel that is executing an
	  applicaiton such as Wait results in a lingering Surrogate channel in the
	  CLI "core show channels" output even though it has already hungup.

	  * Fix bridge_exec() to not hold onto the current_dest_chan ref once it has
	  been put into the bridge.

	  * Eliminated bridge_exec()'s use of RAII_VAR().

	  ASTERISK-24224 #close
	  Reported by: Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/4041/
	  ........

	  Merged revisions 424668 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424669 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424670 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-06 07:39 +0000 [3a87f32dc0]  Matt Jordan <mjordan@digium.com>

	* sdp_srtp: Add new lines to some WARNING messages
	  ........

	  Merged revisions 424646 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424647 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424648 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-05 20:01 +0000 [cce3d99ec8]  Matt Jordan <mjordan@digium.com>

	* res_pjsip/pjsip_options: Do not 404 an OPTIONS request not sent to an endpoint

	  An OPTIONS request that is sent to Asterisk but not to a specific endpoint is
	  currently sent a 404 in response. This is because, not surprisingly, an empty
	  extension is never going to be found in the dialplan.

	  This patch makes it so that we only attempt to look up the endpoint in the
	  dialplan if it is specified in the OPTIONS request URI.

	  #SIPit31

	  ASTERISK-24370 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 424624 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424625 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424626 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-05 19:53 +0000 [c013916869]  Matt Jordan <mjordan@digium.com>

	* pjsip/dialplan_functions: Handle PJSIP_MEDIA_OFFER called on non-PJSIP channels

	  Calling PJSIP_MEDIA_OFFER on a non-PJSIP channel is hazardous to your health.
	  It will treat the channels as a PJSIP channel, eventually hitting an ao2 error,
	  FRACKing on assertion error, and quite likely crashing.

	  This patch adds checks to the read/write callbacks that ensure that the channel
	  technology is of type 'PJSIP' before attempting to operate on the channel.

	  #SIPit31

	  ASTERISK-24382 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 424621 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424622 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424623 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-05 19:31 +0000 [45b7b474ac]  Matt Jordan <mjordan@digium.com>

	* res_pjsip: Prevent crashes when PJPROJECT presents an rdata with no message

	  When a message that exceeds the PJ_MAX_PKT_SIZE is sent over a reliable
	  transport, it is possible (although it shouldn't occur) for pjproject to pass
	  up an rdata object with a NULL msg in the msg_info. Needless to say, things
	  that attempt to dereference this are in for a rough ride.

	  In particular, this caused crashes in three different locations, all of which
	  are 'low level' enough to intercept an rdata object early in processing:

	  (1) res_pjsip_logger
	  (2) res_hep_pjsip
	  (3) res_pjsip/distributor

	  Anything that can intercept an rdata object before res_pjsip/distributor should
	  be defensive when looking at the received packet.

	  #SIPit31

	  ASTERISK-24369 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 424618 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424619 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424620 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-05 19:13 +0000 [f27f41a288]  Matt Jordan <mjordan@digium.com>

	* res/res_pjsip_pubsub: Gracefully handle errors when re-creating subscriptions

	  A subscription that has been persisted can - for various reasons - fail to be
	  re-created on startup. This patch resolves a number of crashes that occurred
	  when a subscription cannot be re-created on several off-nominal paths.

	  #SIPit31

	  ASTERISK-24368 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 424601 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424602 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-04 19:49 +0000 [9611ef4f1e]  Corey Farrell <git@cfware.com>

	* Release AMI connections on shutdown.

	  ASTERISK-24378 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4037/
	  ........

	  Merged revisions 424578 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 424579 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424580 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424581 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-04 19:15 +0000 [1b0902caa4]  Corey Farrell <git@cfware.com>

	* chan_motif: Correct last commit to use ao2_cleanup to free format cap

	  This fix applies to 13 and trunk.

	  ASTERISK-24384 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4043/
	  ........

	  Merged revisions 424554 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424555 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-04 19:02 +0000 [0cea12b9e8]  Corey Farrell <git@cfware.com>

	* chan_motif: Release format capabilities and config on module load error

	  ASTERISK-24384 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4043/
	  ........

	  Merged revisions 424550 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 424551 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424552 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424553 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-03 16:58 +0000 [24ded9d9eb]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Fix XML typo and update CHANGES.

	  ASTERISK-24199
	  ........

	  Merged revisions 424528 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424529 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424530 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-03 14:42 +0000 [70301b0438]  Richard Mudgett <rmudgett@digium.com>

	* audiohooks: Reevaluate the bridge technology when an audiohook is added or removed.

	  Adding a mixmonitor to a channel causes the bridge to change technologies
	  from native to simple_bridge so the call can be recorded.  However, when
	  the mixmonitor is stopped the bridge does not switch back to the native
	  technology.

	  * Added unbridge requests to reevaluate the bridge when a channel
	  audiohook is removed.

	  * Moved the unbridge request into ast_audiohook_attach() ensure that the
	  bridge reevaluates whenever an audiohook is attached.  This simplified the
	  mixmonitor and chan_spy start code as well.

	  * Added defensive code to stop_mixmonitor_full() in case additional
	  arguments are ever added to the StopMixMonitor application.

	  * Made ast_framehook_detach() not do an unbridge request if the framehook
	  does not exist.

	  * Made ast_framehook_list_fixup() do an unbridge request if there are any
	  framehooks.  Also simplified the loop.

	  ASTERISK-24195 #close
	  Reported by: Jonathan Rose

	  Review: https://reviewboard.asterisk.org/r/4046/
	  ........

	  Merged revisions 424506 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424507 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424508 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-03 13:54 +0000 [cc11a78869]  Kristian Hogh

	* app_queue: Add dialplan function to get the channel name at the specified position in a queue.

	  The QUEUE_GET_CHANNEL function returns the caller's channel name at the
	  specified position in a queue.

	  QUEUE_GET_CHANNEL(<queuename>[,<position>])

	  The queue position parameter defaults to 1 if not specified.

	  Noop(${QUEUE_GET_CHANNEL(queuename, 2)})
	  "SIP/peer-00000002", if queue exist and have at least 2 callers

	  Noop(${QUEUE_GET_CHANNEL(queuename, 1)})
	  Noop(${QUEUE_GET_CHANNEL(queuename)})
	  "SIP/peer-00000000", if queue exist and have at least 1 caller

	  ASTERISK-24365 #close
	  Reported by: Kristian Hogh
	  Patches:
	        queue_get_firstchannel.patch (license #6639) patch uploaded by Kristian Hogh
	        rb4035.patch (license #6639) patch uploaded by Kristian Hogh
	        Patch morphed from QUEUE_GET_FIRSTCHANEL to the more general QUEUE_GET_CHANNEL
	        on reviewbord.

	  Review: https://reviewboard.asterisk.org/r/4035/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424493 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-03 12:47 +0000 [0165c5f95a]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip: Fix deadlock when masquerading PJSIP channels.

	  Performing a directed call pickup resulted in a deadlock when PJSIP
	  channels were involved.

	  A masquerade needs to hold onto the channel locks while it swaps channel
	  information between the two channels involved in the masquerade.  With
	  PJSIP channels, the fixup routine needed to push a fixup task onto the
	  PJSIP channel's serializer.  Unfortunately, if the serializer was also
	  processing a task that needed to lock the channel, you get deadlock.

	  * Added a new control frame that is used to notify the channels that a
	  masquerade is about to start and when it has completed.

	  * Added the ability to query taskprocessors if the current thread is the
	  taskprocessor thread.

	  * Added the ability to suspend/unsuspend the PJSIP serializer thread so a
	  masquerade could fixup the PJSIP channel without using the serializer.

	  ASTERISK-24356 #close
	  Reported by: rmudgett

	  Review: https://reviewboard.asterisk.org/r/4034/
	  ........

	  Merged revisions 424471 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424472 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424473 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-03 10:55 +0000 [4967478d18]  gtjoseph <george.joseph@fairview5.com>

	* sorcery: Prevent SEGV in sorcery_wizard_create when there's no create function

	  When you call ast_sorcery_create() you don't necessarily know which wizard is
	  going to be invoked.  If it happens to be a wizard like 'config' that doesn't
	  have a 'create' virtual function you get a segfault in the
	  sorcery_wizard_create callback.  This patch catches the null function pointer,
	  does an ast_assert, and logs an error.

	  Review: https://reviewboard.asterisk.org/r/4044/
	  ........

	  Merged revisions 424447 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424448 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424449 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-03 08:59 +0000 [b1f8eba178]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Restore functional default for callerid_privacy

	  The pjsip config option default fixups from r424263 altered the
	  functional default from "allowed_not_screened" to "allowed". This
	  change restores the functional default value when none is provided.
	  ........

	  Merged revisions 424426 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424427 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424428 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-03 08:33 +0000 [4246652603]  Kinsey Moore <kmoore@digium.com>

	* Manager: Add missing fields and documentation for CoreShowChannels

	  This corrects some issues introduced in the responses to the
	  CoreShowChannels AMI command as well as adding documentation for the
	  responses. The command in Asterisk 12 was missing the following fields:
	  Duration, Application, ApplicationData, and BridgedChannel and
	  BridgedUniqueID (replaced with BridgeId).

	  ASTERISK-24262 #close
	  Reported by: Mitch Claborn
	  Review: https://reviewboard.asterisk.org/r/4040/
	  ........

	  Merged revisions 424423 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424424 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424425 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-02 16:55 +0000 [2b0777c017]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip: Make transport cipher option accept a comma separated list of cipher names.

	  Improvements to the res_pjsip transport cipher option.

	  * Made the cipher option accept a comma separated list of OpenSSL cipher
	  names.  Users of realtime will be glad if they have more than one name to
	  list.

	  * Added the CLI command 'pjsip list ciphers' so a user can know what
	  OpenSSL names are available for the cipher option.

	  * Updated the cipher option online XML documentation to specify what is
	  expected for the value.

	  * Updated pjsip.conf.sample to not indicate that ALL is acceptable since
	  ALL does not imply a preference order for the ciphers and PJSIP does not
	  simply pass the string to OpenSSL for interpretation.

	  ASTERISK-24199 #close
	  Reported by: Joshua Colp

	  Review: https://reviewboard.asterisk.org/r/4018/
	  ........

	  Merged revisions 424393 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424394 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424395 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-02 15:23 +0000 [b15cd42b5b]  Jonathan Rose <jrose@digium.com>

	* Alembic: Add enumerator value to sippeers -> directmedia - 'outgoing'

	  The 'outgoing' value was left off of the enumerator when first creating the
	  column. This patch adds it, and should gracefully upgrade keeping the existing
	  data in tact.

	  ASTERISK-23781 #close
	  Reported by: Stephen More
	  Review: https://reviewboard.asterisk.org/r/4013/
	  ........

	  Merged revisions 424372 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424373 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424380 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-02 10:33 +0000 [2f570094b7]  Jonathan Rose <jrose@digium.com>

	* chan_pjsip: Fix an assertion for channels that lack formats on creation

	  ASTERISK-24222 #close
	  Reported by: Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/4017/
	  ........

	  Merged revisions 424333 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424358 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-02 08:36 +0000 [aa5458d6ab]  Scott Griepentrog <sgriepentrog@digium.com>

	* res_pjsip: document use of rewrite_contact in sample conf

	  Without setting rewrite_contact, an invite to an endpoint
	  behind NAT will not reach it - unless the endpoint itself
	  uses STUN or TURN to discover it's public URI.  Thus, the
	  use of this should be in the sample documentation.

	  Review: https://reviewboard.asterisk.org/r/4036/
	  ........

	  Merged revisions 424337 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424338 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424339 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-01 15:37 +0000 [a752ca00bd]  Corey Farrell <git@cfware.com>

	* res_hep: Release allocation reference to configuration.

	  ASTERISK-24362 #close
	  Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4026/
	  ........

	  Merged revisions 424312 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424313 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424314 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-01 11:39 +0000 [adba2a8d7f]  Joshua Colp <jcolp@digium.com>

	* res_pjsip: Add 'dtls_fingerprint' option to configure DTLS fingerprint hash.

	  During the latest update to DTLS-SRTP support the ability to configure
	  the hash used for fingerprints was added. This gave us two supported ones:
	  SHA-1 and SHA-256. The default was accordingly updated to SHA-256.
	  Unfortunately this configuration ability was not exposed within res_pjsip.
	  This change adds a dtls_fingerprint option that controls it.

	  #SIPit31
	  ........

	  Merged revisions 424290 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424291 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424292 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-01 11:20 +0000 [9233b1cf44]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Accept DTLS attributes in top level, not just media session.

	  #SIPit31
	  ........

	  Merged revisions 424287 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424288 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424289 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-01 07:28 +0000 [4d2c7c23f8]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Handle defaults properly

	  This updates the code behind PJSIP configuration options with custom
	  handlers to deal with the assigned default values properly where it
	  makes sense and adjusting the default value where it doesn't. Before
	  applying this patch, there were several cases where the default value
	  for an option would prevent that config section from loading properly.

	  Reported by: Thomas Thompson
	  Review: https://reviewboard.asterisk.org/r/4019/
	  ........

	  Merged revisions 424263 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424266 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424267 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-01 07:15 +0000 [122cc050d0]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Force transport on contact rewrite

	  If contact rewriting is enabled but the contact differs in transport
	  from what is actually being used, messages after the initial INVITE
	  transaction can be sent to an incorrect transport/port combination. In
	  the case where this bug occurred the remote party never received a BYE
	  since it was sent to the remote party's TCP port over UDP.

	  Review: https://reviewboard.asterisk.org/r/4032/
	  ........

	  Merged revisions 424244 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424245 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424246 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-01 05:10 +0000 [c3a7524457]  ibercom <ibercom123@gmail.com> (License #6599)

	* chan_sip: Simplify some unref code by removing unlink_peer_from_tables.

	  ASTERISK-22945 #related
	  Reported by: ibercom
	  Patches:
	    asterisk11-chan_sip-simplifies.patch uploaded by ibercom (License #6599)
	  ........

	  Merged revisions 424181 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 424182 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 424183 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424184 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424185 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-01 04:55 +0000 [841d978a30]  ibercom <ibercom123@gmail.com> (License #6599)

	* chan_sip: Remove excess ref of realtime peer before sip_poke_peer.

	  The peer is referenced at the end of sip_poke_peer, it should not get
	  an extra ref before the call to sip_poke_peer. This fixes a memory
	  leak.

	  ASTERISK-22945 #close
	  Reported by: ibercom
	  Tested by: Yuriy Gorlichenko
	  Patches:
	    asterisk11.patch uploaded by ibercom (License #6599)

	  Review: https://reviewboard.asterisk.org/r/4031/
	  ........

	  Merged revisions 424176 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 424177 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 424178 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424179 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424180 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-30 06:42 +0000 [d7c29885ad]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Don't place an extra whitespace before 'rport' and don't put IPv6 addresses in brackets.

	  #SIPit31
	  ........

	  Merged revisions 424155 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424156 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424157 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-30 06:36 +0000 [3641ebcf96]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Ensure that the base and mapped address for candidates is present in SDP.

	  This change fixes an issue where ICE candidates put into the SDP did not contain
	  the 'raddr' and 'rport' information for server reflexive and relay candidates.

	  #SIPit31
	  ........

	  Merged revisions 424151 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 424152 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424153 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424154 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-29 17:00 +0000 [27396a6b59]  gtjoseph <george.joseph@fairview5.com>

	* pjsip_cli: Suppress header print on error or no objects

	  If there's an error on the pjsip command line or there are no objects, don't
	  print the column headers.

	  ASTERISK-24350 #close
	  Reported-by: Brad Latus
	  Tested-by: George Joseph
	  Tested-by: Brad Latus

	  Review: https://reviewboard.asterisk.org/r/4025/
	  ........

	  Merged revisions 424128 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424129 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424130 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-29 16:32 +0000 [b56dfb78c5]  Walter Doekes <walter+asterisk@wjd.nu>

	* autosupport: Fix bashism.

	  '==' is bashism (bashspecific, fails when dash is /bin/sh). Anyway, a
	  'case' works better there.

	  Originally committed in r375059 and r375060 on 2012-10-16 21:13:08.

	  ASTERISK-20567 #close
	  Reported by: Tzafrir Cohen
	  ........

	  Merged revisions 424117 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 424125 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424126 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424127 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-29 16:18 +0000 [270932635d]  Richard Mudgett <rmudgett@digium.com>

	* Simplify UUID generation in several places.

	  Replace code using ast_uuid_generate() with simpler and faster code using
	  ast_uuid_generate_str().  The new code avoids a malloc(), free(), and
	  copy.
	  ........

	  Merged revisions 424103 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424105 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424109 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-29 15:28 +0000 [9d2bc0675a]  Richard Mudgett <rmudgett@digium.com>

	* threadpool.c: Minor cleanup fixes.

	  * Fix threadpool_alloc() prototype.

	  * Add missing off-nominal NULL check of pool in threadpool_alloc().

	  * searializer_create() does not need to create the object with a lock as
	  the lock is not used.
	  ........

	  Merged revisions 424096 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424097 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424098 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-27 12:29 +0000 [2eef53c465]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Reduce SDP size by removing duplicate connection lines.

	  Due to the architecture of how media streams are handled each individual
	  handler adds connection details (IP address) for it. The first media stream
	  is then used as the top level SDP connection line. In practice each
	  line ends up being the same so to reduce the SDP size stream-level connection
	  information is also added to the SDP if it differs from the top level SDP
	  connection line.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424077 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-27 07:44 +0000 [76744543b4]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Add additional checks for delaying session refreshes.

	  There are certain situations which no checks existed for which need to prevent
	  session refreshes. This includes sending a session refresh with SDP before SDP
	  negotiation has completed and sending a session refresh before the dialog itself
	  has been established. Checks for these have been added.

	  Additionally COLP related UPDATEs were including SDP when it is not needed.

	  Review: https://reviewboard.asterisk.org/r/4008/
	  ........

	  Merged revisions 424056 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 424057 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424058 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-26 10:51 +0000 [3c1804eb0d]  Richard Mudgett <rmudgett@digium.com>

	* format_mp3: Made the get script conditionally apply patch if not already there.

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424039 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-26 10:43 +0000 [e0abb82ab8]  Walter Doekes <walter+asterisk@wjd.nu>

	* core: Ouch, forgot to undo a test free() in r423978.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424038 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-26 10:28 +0000 [d07b9af24b]  Jeremy Laine

	* res_fax: Fix out of bounds error in update_modem_bits().

	  ASTERISK-24357 #close
	  Reported by: Jeremy Laine
	  Patches:
	        res_fax_bounds.patch (license #6561) patch uploaded by Jeremy Laine
	  	  Modified patch to not use magic numbers.
	  ........

	  Merged revisions 423979 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 423983 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423987 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423992 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424016 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-26 09:41 +0000 [37179a2b1f]  Walter Doekes <walter+asterisk@wjd.nu>

	* core: Don't allow free to mean ast_free (and malloc, etc..).

	  This gets rid of most old libc free/malloc/realloc and replaces them
	  with ast_free and friends. When compiling with MALLOC_DEBUG you'll
	  notice it when you're mistakenly using one of the libc variants. For
	  the legacy cases you can define WRAP_LIBC_MALLOC before including
	  asterisk.h.

	  Even better would be if the errors were also enabled when compiling
	  without MALLOC_DEBUG, but that's a slightly more invasive header
	  file change.

	  Those compiling addons/format_mp3 will need to rerun
	  ./contrib/scripts/get_mp3_source.sh.

	  ASTERISK-24348 #related
	  Review: https://reviewboard.asterisk.org/r/4015/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423978 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-26 03:26 +0000 [b8c1130ed1]  Jeremy Lainé (License #6561)

	* docs: Escape unescaped minus sign in asterisk.8 manpage.

	  ASTERISK-23768 #close
	  Reported by: Jeremy Lainé
	  Patches:
	    escape_manpage_hyphen.patch uploaded by Jeremy Lainé (License #6561)
	  ........

	  Merged revisions 423915 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 423916 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423917 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423918 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423919 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-25 16:03 +0000 [fa0c33ebc1]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip.c: Add missing off nominal cleanup in ast_sip_push_task_synchronous().

	  * Made memset the std struct in ast_sip_push_task_synchronous() because if
	  DEBUG_THREADS is enabled then uninitialized lock tracking data is used.
	  ........

	  Merged revisions 423894 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423895 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423896 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-25 15:49 +0000 [d172d84fe1]  Kristian Høgh (License #6639)

	* musiconhold: Add preferchannelclass=no option to prefer app class.

	  The new option 'preferchannelclass' is added to musiconhold.conf. If yes
	  (the default) the CHANNEL(musicclass) is preferred when choosing the
	  hold music. If it is no, the class suggested by the application that
	  calls the MoH (e.g. the Queue() app) gets preferred (new behaviour).

	  This way you set a different hold-music from the Queue-music by setting
	  both the CHANNEL(musicclass) and the queue-context musicclass.

	  ASTERISK-24276 #close
	  Reported by: Kristian Høgh
	  Patches:
	    app_override_channel_moh.patch uploaded by Kristian Høgh (License #6639)

	  Review: https://reviewboard.asterisk.org/r/4010/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423893 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-24 13:35 +0000 [68077634fe]  Richard Mudgett <rmudgett@digium.com>

	* pjsip_options.c: Fix race condition stopping periodic out of dialog OPTIONS request.

	  The crash on the issues is a result of an invalid transport configuration
	  change when asterisk is restarted.  The attempt to send the qualify
	  request fails and we cleaned up.  However, the callback is also called
	  which results in a double unref of the objects involved.

	  * Put a wrapper around pjsip_endpt_send_request() to detect when the
	  passed in callback is called because of an error so callers can know to
	  not cleanup.

	  * Made send_request_cb() able to handle repeated challenges (Up to 10).

	  * Fix periodic endpoint qualify OPTIONS sched deletion race by avoiding
	  it.  The sched entry will no longer self stop and must be externally
	  stopped.

	  * Added REF_DEBUG description tags to struct sched_data in
	  pjsip_options.c.

	  * Fix some off-nominal ref leaks in schedule_qualify(),
	  qualify_and_schedule().

	  * Reordered pjsip_options.c module start/stop code to cleanup better on
	  error.

	  ASTERISK-24295 #close
	  Reported by: Rogger Padilla

	  Review: https://reviewboard.asterisk.org/r/3954/
	  ........

	  Merged revisions 423866 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423867 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423868 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-24 03:55 +0000 [39fada4dc9]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Unref outbound proxy structure on dialog/pvt destruction.

	  Make sure outbound proxy refs are always unreffed on dialog destruction.

	  Review: https://reviewboard.asterisk.org/r/4016/
	  ........

	  Merged revisions 423800 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 423801 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423802 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423803 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423804 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-23 09:36 +0000 [a89964a510]  Mark Michelson <mmichelson@digium.com>

	* Make CDR and CEL unit tests less FRACKy.

	  Prior to this commit, CDR and CEL tests were expected to trigger
	  FRACKs (i.e. assertions) due to the fact that the channels they
	  create have no formats on them. Some code was independently added
	  recently that attempts to prevent FRACKs from occurring by failing
	  early when attempting to set up translation paths if one or both
	  channels support no formats. Unfortunately, this attempt to be helpful
	  made the CDR and CEL tests go from simply FRACKing to outright
	  failing and in some cases, failing so badly as to crash Asterisk.

	  This commit seeks to correct past mistakes by adding the ulaw format
	  to channels created by the CDR and CEL unit tests. This makes setting
	  up translation paths succeed, eliminates previously-seen FRACKs, and
	  ultimately causes the unit tests to succeed again.

	  Review: https://reviewboard.asterisk.org/r/4014
	  ........

	  Merged revisions 423783 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423784 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-22 14:49 +0000 [593455621b]  Torrey Searle (License #5334)

	* chan_sip: On INVITE retransmission, don't add an extra 503 response.

	  INVITE arrives to asterisk, asterisk responds Busy(). If the INVITE is
	  retransmitted, asterisk would generate a 503 in addition to the 486.

	  Thanks Torrey Searle for providing a working regression test.

	  ASTERISK-24335 #close

	  Review: https://reviewboard.asterisk.org/r/4003/
	  Patches:
	    retrans_486_invite.patch uploaded by Torrey Searle (License #5334)
	  ........

	  Merged revisions 423720 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 423721 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423722 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423723 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423724 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-22 12:42 +0000 [63a4da4a0d]  Walter Doekes <walter+asterisk@wjd.nu>

	* cli.c: Fix tab completion "module load" when MALLOC_DEBUG is enabled.

	  r421600 conflicted with r155763.

	  ASTERISK-24348 #close
	  ........

	  Merged revisions 423657 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 423658 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423659 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423660 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423661 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-20 20:16 +0000 [64a9e5f001]  Matt Jordan <mjordan@digium.com>

	* main/channel: Unlock channel in off-nominal path

	  In r423414 (13) / r423415 (trunk), an API call that determines if a format
	  capability structure is empty was added. This returns true if the format
	  capability structure is completely empty or "none". A check for this was added
	  in channel.c's set_format call. Unfortunately, when this check was true, it
	  returned from the function while still holding the channel lock. This caused
	  the CDR unit tests - which have a tendency to create channels with no formats -
	  to deadlock. Whoops.

	  This patch unlocks the channel on the off-nominal path.
	  ........

	  Merged revisions 423641 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423642 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-20 18:55 +0000 [9bf039346a]  Matt Jordan <mjordan@digium.com>

	* rest-api/api-docs/events.json: Remove non-compliant 'extends' attribute

	  Prior to the release of Swagger 1.2, the attribute 'extends' was being
	  promoted as a possible way to show that a particular object extends an existing
	  object. Instead, the Swagger specification went with the 'subTypes' attribute
	  in the base object. This patch removes the unsupported attribute; the object
	  that the offending objects proposed to extend already lists them in its
	  'subTypes' attribute.

	  ASTERISK-24300 #close
	  Reported by: Bradley Watkins
	  ........

	  Merged revisions 423620 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423621 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423622 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-20 18:41 +0000 [de6e467db7]  Matt Jordan <mjordan@digium.com>

	* rest-api/api-docs: Correct basePath in resources to match top resources file

	  The resources.json file that defines the resource JSON files used with ARI
	  references a basePath of 'http://localhost:8088/ari'. This does not match what
	  is defined in the resource files themselves, 'http://localhost:8088/stasis'.
	  The correct base path is the one that includes 'ari' in the URL; this patch
	  updates the various resource JSON files to have the correct basePath.

	  ASTERISK-24339 #close
	  Reported by: Bradley Watkins
	  ........

	  Merged revisions 423617 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423618 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423619 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-19 14:51 +0000 [354fff327d]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_notify: Fix crash on unload/load and don't say the module doesn't exist on reload.

	  When unloading the module did not unregister the CLI commands causing a crash upon
	  load when they were registered again.

	  When reloading the module the return value from the config options framework was not
	  checked to determine if an error occurred or not. This caused a message to be output
	  saying the module did not exist when reloading if no changes were present.

	  AST-1433 #close
	  AST-1434 #close
	  ........

	  Merged revisions 423579 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423580 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423581 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-19 12:16 +0000 [ec0313c411]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_sdp_rtp.c: Fix native formats containing formats that were not negotiated.

	  Outgoing PJSIP calls can result in non-negotiated formats listed in the
	  channel's native formats if video formats are listed in the endpoint's
	  configuration.  The resulting call could then use a non-negotiated format
	  resulting in one way audio.

	  * Simplified the update of session->req_caps in set_caps().  Why do
	  something in five steps when only one is needed?

	  AFS-162 #close

	  Review: https://reviewboard.asterisk.org/r/4000/
	  ........

	  Merged revisions 423561 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423563 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-19 10:54 +0000 [6dae345674]  Jonathan Rose <jrose@digium.com>

	* Stasis_channels: Resolve unfinished Dials when doing masquerades

	  Masquerades into channels that are in the dialing state don't end their dial
	  and this goes against the model for things like CDRs and generating Dial end
	  manager actions and such.

	  ASTERISK-24237 #close
	  Reported by: Richard Mudgett
	  Review: https://reviewboard.asterisk.org/r/3990/
	  ........

	  Merged revisions 423525 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423530 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423546 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-19 10:11 +0000 [7e602175ff]  Jonathan Rose <jrose@digium.com>

	* chan_iax2: Fix a crash when using chan_iax2 jitterbuffer settings

	  Caused by format changes in Asterisk 13

	  ASTERISK-24265 #close
	  Reported by: Dafi Ni
	  Review: https://reviewboard.asterisk.org/r/3999/
	  ........

	  Merged revisions 423524 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423526 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-19 07:50 +0000 [7f2623a26f]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Prevent T38 framehook being put on wrong channel

	  This change gives framehooks a reverse-direction masquerade callback in
	  addition to chan_fixup_cb similar to the callback added to datastores
	  to handle the same situation. The new callback provides the same
	  parameters as the fixup callback, but is called on the new channel's
	  framehooks before moving framehooks from the old channel to the new
	  channel. This gives the framehooks an oppurtunity to decide whether
	  they should remain on the new channel or be removed.

	  This new callback is used to prevent the PJSIP T.38 framehook from
	  remaining on a masqueraded channel if the new channel is not also a
	  PJSIP channel. This was causing a crash when a local channel was
	  masqueraded into a PJSIP channel and the framehook was executed on the
	  local channel since the channel's tech private data was not structured
	  as expected.

	  Review: https://reviewboard.asterisk.org/r/4001/
	  ........

	  Merged revisions 423503 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423504 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423505 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 14:31 +0000 [40e033a6b6]  Sean Bright <sean@malleable.com>

	* res_pjsip: Don't require a password when doing userpass authentication.

	  An empty password is valid for username/password authentication so we should
	  allow password to be empty/not supplied.

	  Review: https://reviewboard.asterisk.org/r/3988
	  ........

	  Merged revisions 423481 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423482 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423483 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 14:23 +0000 [ad8ef9175a]  gtjoseph <george.joseph@fairview5.com>

	* utils: Create ast_strsep function that ignores separators inside quotes

	  This function acts like strsep with three exceptions...
	  * The separator is a single character instead of a string.
	  * Separators inside quotes are treated literally instead of like separators.
	  * You can elect to have leading and trailing whitespace and quotes
	  stripped from the result and have '\' sequences unescaped.

	  Like strsep, ast_strsep maintains no internal state and you can call it
	  recursively using different separators on the same storage.

	  Also like strsep, for consistent results, consecutive separators are not
	  collapsed so you may get an empty string as a valid result.

	  Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3989/
	  ........

	  Merged revisions 423476 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423478 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423480 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 13:56 +0000 [de72f3edbc]  Mark Michelson <mmichelson@digium.com>

	* Add subscription state test events.

	  These are needed for a set of batched notification RLS tests that are
	  about to be committed to the testsuite.

	  Review: https://reviewboard.asterisk.org/r/3967
	  ........

	  Merged revisions 423462 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423463 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 12:22 +0000 [ac46240b62]  Jonathan Rose <jrose@digium.com>

	* res_pjsip_endpoint_identifier_ip: Fix parsing of match value with CIDR

	  Also fixes comma separates match lists

	  ASTERISK-24290 #close
	  Reported by: Ray Crumrine
	  Review: https://reviewboard.asterisk.org/r/3995/
	  ........

	  Merged revisions 423417 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423425 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423442 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 12:10 +0000 [02cf1835e3]  Richard Mudgett <rmudgett@digium.com>

	* bridge_softmix.c: Made use ao2_replace() instead of the inline equivalent.

	  * Clarified some read/write format comments.

	  * Fixed a doxygen tag typo.
	  ........

	  Merged revisions 423423 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423424 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 11:56 +0000 [a7add3a257]  Richard Mudgett <rmudgett@digium.com>

	* astobj2.c/refcounter.py: Fix to deal with invalid object refs.

	  * Make astob2 REF_DEBUG output an invalid object line when an invalid ao2
	  object ref/unref is attempted.  This is similar to the
	  constructor/destructor lines.

	  * Fixed refcounter.py to handle skewed objects that have
	  constructor/destructor states.

	  * Made refcounter.py highlight the invalid ao2 object refs by putting them
	  in their own section of the processed output file.

	  * Made refcounter.py highlight unreffing an object by more than one that
	  results in a negative ref count and the object being destroyed.  The
	  abnormally destroyed object is reported in the invalid and finalized
	  object sections of the output.

	  Review: https://reviewboard.asterisk.org/r/3971/
	  ........

	  Merged revisions 423349 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 423400 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423416 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423418 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423422 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 11:38 +0000 [fa6313ad29]  Mark Michelson <mmichelson@digium.com>

	* Add API call to determine if format capability structure is "empty".

	  Empty here means that there are no formats in the format_cap structure
	  or the only format in it is the "none" format.

	  I've added calls to check the emptiness of a format_cap in a few places
	  in order to short-circuit operations that would otherwise be pointless
	  as well as to prevent some assertions from being triggered in cases
	  where channels with no formats are used.
	  ........

	  Merged revisions 423414 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423415 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 11:24 +0000 [389db2b720]  Mark Michelson (License #5049)

	* res_fax_spandsp: Properly handle cleanup before starting FAXes.

	  If faxing fails at a very early stage, then it is possible for
	  us to pass a NULL t30 state pointer to spandsp, which spandsp
	  is none too pleased with.

	  This patch ensures that we pass the correct pointer to spandsp
	  in the situation where we have not yet set our local t30 state
	  pointer.

	  ASTERISK-24301 #close
	  Reported by Matt Jordan
	  Patches:
	  	ASTERISK-24301-fax.diff Uploaded by Mark Michelson (License #5049)
	  ........

	  Merged revisions 423360 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423365 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423372 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423380 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 11:09 +0000 [79eac1ffca]  Mark Michelson <mmichelson@digium.com>

	* res_pjsip_pubsub: Add some type safety when generating NOTIFY bodies.

	  res_pjsip_pubsub has two separate checks that it makes when a SUBSCRIBE
	  arrives.
	  * It checks that there is a subscription handler for the Event
	  * It checks that there are body generators for the types in the Accept header

	  The problem is, there's nothing that ensures that these two things will
	  actually mesh with each other. For instance, Asterisk will accept a subscription
	  to MWI that accepts pidf+xml bodies. That doesn't make sense.

	  With this commit, we add some type information to the mix. Subscription
	  handlers state they generate data of type X, and body generators state
	  that they consume data of type X. This way, Asterisk doesn't end up in
	  some hilariously mismatched situation like the one in the previous paragraph.

	  ASTERISK-24136 #close
	  Reported by Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/3877
	  Review: https://reviewboard.asterisk.org/r/3878
	  ........

	  Merged revisions 423344 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423348 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423350 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 10:14 +0000 [126334a7aa]  gtjoseph <george.joseph@fairview5.com>

	* res_pjsip: ami: Fix error in AMI output when an endpoint has no transport

	  When no transport is associated to an endpoint, the AMI output for
	  PJSIPShowEndpoint indicates an error instead of silently ignoring the
	  missing transport.

	  This patch causes the error to appear only if a transport was specified
	  on the endpoint and the transport doesn't exist.  It also fixes an issue
	  with counting the objects that were actually found.

	  ASTERISK-24161 #close
	  ASTERISK-24331 #close
	  Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3998/
	  ........

	  Merged revisions 423282 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423284 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423285 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 10:07 +0000 [b89491e39c]  David M. Lee <dlee@digium.com>

	* Only install dahdi_span_config_hook if DAHDI is enabled

	  This patch changes the install to only install the hook script if
	  DAHDI is enabled. It also adds the script to the uninstall task, and
	  moves the DAHDI_UDEV_HOOK_DIR variable so that it's not between the
	  _MAKEOPTS variables and their comment.

	  This allows installs which specify a --prefix to work normally, as
	  long as they don't enable DAHDI.

	  Review: https://reviewboard.asterisk.org/r/3972/
	  ........

	  Merged revisions 423281 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423283 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-18 09:46 +0000 [d120e40309]  gtjoseph <george.joseph@fairview5.com>

	* config: bug: Fix SEGV in ast_category_insert when matching category isn't found

	  If you call ast_category_insert with a match category that doesn't exist, the
	  list traverse runs out of 'next' categories and you get a SEGV.  This patch
	  adds check for the end-of-list condition and changes the signature to return
	  an int for success/failure indication instead of a void.

	  The only consumer of this function is manager and it was also changed to use
	  the return value.

	  Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3993/
	  ........

	  Merged revisions 423276 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 423277 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423278 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423279 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423280 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-17 13:06 +0000 [8839ba3727]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Ensure that the thread terminating pj stuff is registered.
	  ........

	  Merged revisions 423253 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423254 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423255 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423256 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-16 17:46 +0000 [fcc09fd0de]  Matt Jordan <mjordan@digium.com>

	* pbx/Makefile: Revert r423237

	  This patch was supposed to go into a team branch, but I was a bit fast on the
	  gun before 'svn switch' had apparently moved the target branch over.


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423238 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-16 17:42 +0000 [712b4195ef]  Matt Jordan <mjordan@digium.com>

	* Add some pbx python stuff


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423237 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-16 16:06 +0000 [618b46d8f0]  Joshua Colp <jcolp@digium.com>

	* Multiple revisions 423209,423212

	  ........
	    r423209 | file | 2014-09-16 17:35:34 -0300 (Tue, 16 Sep 2014) | 8 lines
	    
	    res_rtp_asterisk: Fix building when pjproject is not used.
	    ........
	    
	    Merged revisions 423207 from http://svn.asterisk.org/svn/asterisk/branches/11
	    ........
	    
	    Merged revisions 423208 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........
	    r423212 | file | 2014-09-16 18:03:59 -0300 (Tue, 16 Sep 2014) | 10 lines
	    
	    res_rtp_asterisk: Fix 100% CPU usage due to timer heap thread spinning.
	    
	    Side note: I need a vacation.
	    ........
	    
	    Merged revisions 423210 from http://svn.asterisk.org/svn/asterisk/branches/11
	    ........
	    
	    Merged revisions 423211 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423209,423212 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423213 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-16 11:33 +0000 [662b687dbe]  Scott Griepentrog <sgriepentrog@digium.com>

	* Voicemail: get correct duration when copying file to vm

	  Changes made during format improvements resulted in the
	  recording to voicemail option 'm' of the MixMonitor app
	  writing a zero length duration in the msgXXXX.txt file.

	  This change introduces a new function ast_ratestream(),
	  which provides the sample rate of the format associated
	  with the stream, and updates the app_voicemail function
	  for ast_app_copy_recording_to_vm to calculate the right
	  duration.

	  Review: https://reviewboard.asterisk.org/r/3996/
	  ASTERISK-24328 #close
	  ........

	  Merged revisions 423192 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423193 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-16 07:12 +0000 [ceedf44edd]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_session: Fix usage of wrong memory pool when creating local SDP.
	  ........

	  Merged revisions 423172 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423173 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423174 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-16 06:12 +0000 [e977425bc8]  Joshua Colp <jcolp@digium.com>

	* res_rtp_asterisk: Fix a myriad of TURN client issues.

	  1. The number of file descriptors an ioqueue instance can handle is fixed, so we
	  now spawn the required number to handle the load.
	  2. Our transport identifiers were exceeding the range supported by pjnath.
	  3. The TURN client did not set up client binding causing needless bandwidth usage.
	  4. The code no longer updates address information on each packet.
	  5. STUN traffic was getting looped back to Asterisk instead of going through the
	  TURN server.
	  6. Synchronization now ensures things are completely setup or destroyed.
	  7. Logging now reflects the target the TURN server is sending to/receiving from
	  on our behalf.

	  ASTERISK-23577 #close
	  Reported by: Jay Jideliov

	  ASTERISK-23634 #close
	  Reported by: Roman Skvirsky

	  Review: https://reviewboard.asterisk.org/r/3982/
	  ........

	  Merged revisions 423150 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423151 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423152 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423153 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-15 05:50 +0000 [77834b72d3]  Zogot, cleaned up by me.

	* contrib: Fix verifyi typo in alembic DB script ps_transport table.

	  Reported by: Zogot (on IRC)
	  Patches:
	    tmp.diff uploaded by Zogot, cleaned up by me.
	  ........

	  Merged revisions 423128 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423129 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423130 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-14 10:54 +0000 [a62fedf0cb]  Walter Doekes <walter+asterisk@wjd.nu>

	* chan_sip: Clarify that sipdebug=yes cannot be undone by the CLI.

	  Document it in sip.conf.

	  ASTERISK-24249 #close
	  Reported by: Avinash Mohod

	  Review: https://reviewboard.asterisk.org/r/3926/
	  ........

	  Merged revisions 423066 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 423067 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 423068 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 423069 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423070 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-14 10:41 +0000 [9c1f34c7e9]  Walter Doekes <walter+asterisk@wjd.nu>

	* musiconhold: Add sort=randstart, and deprecate old stuff.

	  - adds sort=randstart (next to sort=, sort=random, sort=alpha)
	  - combines duplicate moh option parsing code into a single function
	  - adds deprecationwarnings for application=r to sort randomly
	  - adds deprecationwarnings for random=yes to sort randomly
	  - removes invisible code that was supposed to stay until 1.8 

	  The sort=randstart works like sort=alpha, except we start at a random
	  position.

	  Review: https://reviewboard.asterisk.org/r/3991/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423065 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-12 12:42 +0000 [02295456ef]  Joshua Colp <jcolp@digium.com>

	* chan_rtp: Add unicast RTP support.

	  This module supports sending both unicast and multicast RTP
	  to a specified target. Multicast functionality is the same as
	  chan_multicast_rtp was. In the case of unicast a specific
	  IP address and port can be specified, along with optional RTP
	  engine and format in the form of:

	  UnicastRTP/<ip address>:<port>/<engine>/<format>

	  This can be useful for sending a copy of a media stream to
	  another application for processing.

	  Review: https://reviewboard.asterisk.org/r/3981/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423004 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-12 11:19 +0000 [dd6bdede7d]  Jonathan Rose <jrose@digium.com>

	* Realtime: Fix a bug that caused realtime destroy command to crash

	  Also has could affect with anything that goes through ast_destroy_realtime.
	  If a CLI user used the command 'realtime destroy <family>' with only a single
	  column/value pair, Asterisk would crash when trying to create a variable list
	  from a NULL value.

	  ASTERISK-24231 #close
	  Reported by: Niklas Larsson
	  Review: https://reviewboard.asterisk.org/r/3985/
	  ........

	  Merged revisions 422984 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422985 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422991 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-11 17:17 +0000 [c212a71f0b]  Mark Michelson <mmichelson@digium.com>

	* Remove undocumented default behavior of ast_play_and_record_full acceptdtmf.

	  ast_play_and_record_full() has a parameter called "acceptdtmf" that is a
	  string of acceptable DTMF digits that may be pressed by a caller to end
	  and accept the recording.

	  ARI uses this function in order to perform recording, and it provides
	  options for what is passed as acceptdtmf to ast_play_and_record_full().
	  By default, ARI passes an empty string, with the intention that no DTMF
	  can be used to end the recording.

	  The problem is that ast_play_and_record_full() attempts to be "helpful"
	  by setting "#" as the acceptdtmf if an empty string or NULL pointer
	  has been passed in. With ARI, this results in unexpected behavior
	  occurring if you have attempted to intercept "#" yourself in order
	  to perform some other manipulation of the live recording.

	  This change removes the "helpful" behavior by no longer accepting
	  "#" as a default acceptdtmf if none is specified by the caller of
	  ast_play_and_record_full(). This makes the ARI scenario work as
	  expected.

	  The other callers of ast_play_and_record_full() are app_voicemail
	  and app_minivm, and in both cases, they pass an explicit "#" to
	  ast_play_and_record_full() as acceptdtmf, so they are unaffected
	  by this change.
	  ........

	  Merged revisions 422964 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422965 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422967 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-10 11:07 +0000 [93894d53c4]  gtjoseph <george.joseph@fairview5.com>

	* config: bug: fix truncation of included config files on permissions error

	  ast_config_text_file_save() currently truncates include files as they
	  are processed.  If a subsequent include file or the main config file has
	  a permissions error that prevents writing, earlier include files are left
	  truncated resulting in a frantic search for backups.

	  This patch causes ast_config_text_file_save to check for write access
	  on all files before it truncates any of them.

	  Will be applied 1.8 > trunk.

	  Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3986/
	  ........

	  Merged revisions 422900 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 422903 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 422904 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422905 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422906 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-10 11:00 +0000 [7bd3287a11]  Sean Bright <sean@malleable.com>

	* pjsip/config_auth.c: Add missing whitespace to log messages.

	  The errors generated when validating 'auth' settings are missing a space which
	  makes the messages a little confusing.
	  ........

	  Merged revisions 422899 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422901 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422902 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-09 15:15 +0000 [a47873168a]  Richard Mudgett <rmudgett@digium.com>

	* Update CHANGES for CHANNEL(onhold).

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422885 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-09 15:11 +0000 [51f082af34]  Rusty Newton <rnewton@digium.com>

	* Sounds/BuildSystem: Modifications to include new releases and Japanese language.

	  Modifying Makefile and sounds.xml to include new core 1.4.26 and extra 1.4.15
	  sound prompt releases, plus the new Japanese core sound prompts contributed
	  by QLOOG.

	  ASTERISK-23324
	  Reported by: Kevin McCoy
	  Tested by: Rusty Newton
	  ........

	  Merged revisions 422789 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 422790 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 422791 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422883 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422884 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-09 11:14 +0000 [9183416fe2]  Richard Mudgett <rmudgett@digium.com>

	* func_channel: Add CHANNEL(onhold) item to get the current hold status of the channel.

	  It would be useful to get the current hold status of a channel.

	  Added CHANNEL(onhold) item that returns 1 (onhold) and 0 (not-onhold) for
	  the hold status of a channel.

	  ASTERISK-24038
	  Reported by: Matt Jordan

	  AFS-113 #close
	  Reported by: Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/3983/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422870 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-08 13:04 +0000 [baf99dffac]  Mark Michelson <mmichelson@digium.com>

	* Add note about configuring list_items on a single line.
	  ........

	  Merged revisions 422855 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422856 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-08 12:53 +0000 [5ad0edacb6]  Mark Michelson <mmichelson@digium.com>

	* Add sample configuration for resource lists.

	  On review /r/3977, it was recommended to note in the
	  sample configuration about the size limitation for
	  resource lists. However, since there was no section in
	  the sample configuration at all for resource list
	  subscriptions, I decided to make a separate commit
	  where I have added the necessary sample configuration
	  as well as the size limitation warning.
	  ........

	  Merged revisions 422853 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422854 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-08 12:35 +0000 [c6bc44f700]  Mark Michelson <mmichelson@digium.com>

	* Pre-allocate transmission data buffer for RLS NOTIFY requests.

	  PJSIP, unless a constant is modified at compilation time, limits
	  SIP requests to 4000 bytes. Full-state RLS notifications can easily
	  exceed this limit with moderately small lists.

	  This changeset allows for Asterisk to work around this size limit by
	  performing its own allocation of the transmission data buffer. This
	  way, Asterisk can allocate a buffer that exceeds the built-in maximum.

	  We still impose our own limit of 64000 bytes, mainly because making
	  allocations larger than that is a bit absurd.

	  ASTERISK-24181 #close
	  Reported by Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/3977
	  ........

	  Merged revisions 422851 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422852 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-08 10:58 +0000 [ef5f7a0e32]  Jonathan Rose <jrose@digium.com>

	* res_pjsip_pubsub: Check supported headers for eventlist when subscribing to
	  resource list

	  https://wiki.asterisk.org/wiki/display/AST/Resource+List+Subscription+Test+Plan
	  According to the off-nominal plan, if evenlist support is not specified in a
	  SUBSCRIBE's supported header(s), that subscription should be rejected with an
	  error.

	  ASTERISK-23871
	  Reported by: Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/3960/diff/#index_header
	  ........

	  Merged revisions 422836 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422837 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-06 17:50 +0000 [71acca4de2]  Matt Jordan <mjordan@digium.com>

	* main/cdr: Copy over location information during a fork

	  When a CDR is forked, a new CDR is created and appended to the CDR chain for
	  the Party A. The forked CDR starts life off as a clone of the last
	  non-finalized for the particular Party A. In the past, merely copying over
	  the snapshots for Party A/Party B would be sufficient. However, as the CDRs
	  now contain cached information from Party A - specifically application/data,
	  context, and extension - we need to copy that over during a fork as well.

	  Huzzah for unit tests catching this when the context/extension were derived
	  from a cached value on the CDR instead of on Party A.
	  ........

	  Merged revisions 422769 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422770 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422771 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-06 17:22 +0000 [e4591f98b1]  Matt Jordan <mjordan@digium.com>

	* main/rtp_engine: Format NTP timestamps as unsigned ints

	  On some systems, a timeval's tv_sec/tv_usec will be unsigned lont ints, as
	  opposed to long ints. When the RTP engine formats these as strings, it was
	  previously formatting them as signed integers, which can result in some
	  odd negative timestamp values (particularly on 32-bit systems). This patch
	  formats the values as unsigned long integers.
	  ........

	  Merged revisions 422766 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422767 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422768 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-06 14:13 +0000 [fd8010de2b]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_sdp_rtp: Fix retrieval of "ice-pwd" attribute if in session and not media stream.
	  ........

	  Merged revisions 422746 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422747 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422748 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-05 17:04 +0000 [d42b116925]  Matt Jordan <mjordan@digium.com>

	* main/cdrs: Preserve context/extension when executing a Macro or GoSub

	  The context/extension in a CDR is generally considered the destination of a
	  call. When looking at a 2-party call CDR, users will typically be presented
	  with the following:

	  context    exten      channel     dest_channel app  data
	  default    1000       SIP/8675309 SIP/1000     Dial SIP/1000,,20

	  However, if the Dial actually takes place in a Macro, the current behaviour
	  in 12 will result in the following CDR:

	  context    exten      channel     dest_channel app  data
	  macro-dial s          SIP/8675309 SIP/1000     Dial SIP/1000,,20

	  The same is true of a GoSub:

	  context    exten      channel     dest_channel app  data
	  subs       dial_stuff SIP/8675309 SIP/1000     Dial SIP/1000,,20

	  This generally makes the context/exten fields less than useful.

	  It isn't hard to preserve these values in the CDR state machine; however, we
	  need to have something that informs us when a channel is executing a
	  subroutine. Prior to this patch, there isn't anything that does this.

	  This patch solves this problem by adding a new channel flag,
	  AST_FLAG_SUBROUTINE_EXEC. This flag is set on a channel when it executes a
	  Macro or a GoSub. The CDR engine looks for this value when updating a Party A
	  snapshot; if the flag is present, we don't override the context/exten on the
	  main CDR object. In a funny quirk, executing a hangup handler must *not* abide
	  by this logic, as the endbeforehexten logic assumes that the user wants to see
	  data that occurs in hangup logic, which includes those subroutines. Since
	  those execute outside of a typical Dial operation (and will typically have
	  their own dedicated CDR anyway), this is unlikely to cause any heartburn.

	  Review: https://reviewboard.asterisk.org/r/3962/

	  ASTERISK-24254 #close
	  Reported by: tm1000, Tony Lewis
	  Tested by: Tony Lewis
	  ........

	  Merged revisions 422718 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422719 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422720 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-05 16:56 +0000 [4499eb05d8]  Matt Jordan <mjordan@digium.com>

	* main/cdr: Fix crash/memory consumption in CDRs in multi-party bridge scenarios

	  This patch fixes an issue where CDRs would get stuck generating an infinite
	  number of CDRs, eventually crashing Asterisk (and consuming a lot of memory
	  along the way).

	  When a channel enters into a multi-party bridge, the CDR engine creates
	  mappings of each participant to each other participant, picking the 'A' party
	  as it goes. So, if we have four channels in a multi-party bridge (Alice, Bob,
	  Charlie, Denise), we would have something like:

	  Alice => Bob
	  Alice => Charlie
	  Alice => Denise
	  Bob => Charlie
	  Bob => Denise
	  Charlie => Denise

	  This works fine when participants enter the bridge a single time.

	  When a participant leaves a bridge, the CDRs for that channel are transitioned
	  to a finalized state.

	  The bug occurs if Bob rejoins. When the CDR engine creates mappings between the
	  channels, it walks through all the participants currently in the bridge, and
	  realizes that no one in the bridge can create a CDR with the channel (Bob).
	  As such it creates a new CDR for the candidate and appends it to that
	  candidate's chain. Unfortunately, on this particular code path, it doesn't
	  stop traversing the candidate's chain. Since we just added ourselves to the
	  chain, this causes the loop to keep going, constantly adding new CDRs.

	  This patch makes it so the engine bails when it creates a CDR match in this
	  case.

	  Review: https://reviewboard.asterisk.org/r/3964/

	  ASTERISK-24241 #close
	  Reported by: Deepak Singh Rawat
	  Tested by: Deepak Singh Rawat

	  ASTERISK-24208
	  Reported by: Frankie Chin
	  ........

	  Merged revisions 422715 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422716 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422717 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-05 15:38 +0000 [025bd1bf3f]  Richard Mudgett <rmudgett@digium.com>

	* func_channel.c: Add missing locking to some CHANNEL() requests.

	  * The CHANNEL() audionativeformat, videonativeformat, audioreadformat, and
	  audiowriteformat now need locking since the media format rework when
	  accessing the channel's format pointers.

	  * Increased the buffer size for CHANNEL() audionativeformat and
	  videonativeformat output strings since the allow=all can be a lengthy
	  list.

	  * Tweaked the CHANNEL() XML documentation for secure_bridge_signaling,
	  secure_bridge_media, and state.

	  * Ensured the output buffer is initialized for secure_bridge_signaling and
	  secure_bridge_media.

	  * Made use the locked_copy_string() macro instead of inlining it for trace
	  and checkhangup.
	  ........

	  Merged revisions 422700 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422701 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-05 15:22 +0000 [85878c4dd8]  Jonathan Rose <jrose@digium.com>

	* Dial API: Add a dial option to indicate the dialed channel will replace dialer

	  Adds an option to the dial API that marks an outgoing dial as replacing the dialing channel for the purpose of propagating accountcode. When it is used, AST_CHANNEL_REQUESTOR_REPLACEMENT is used instead of AST_CHANNEL_REQUESTOR_BRIDGE_PEER when setting accountcodes on the involved channels with ast_channel_req_accountcodes.

	  Review: https://reviewboard.asterisk.org/r/3968/
	  ........

	  Merged revisions 422684 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422697 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-05 14:39 +0000 [e19017fc00]  Jonathan Rose <jrose@digium.com>

	* Call IDs: Fix appearance of call ID in core show channels when NULL

	  NULL call IDs were meant to appear as '(none)' but instead were showing
	  the contents of an uninitialized character buffer.

	  ASTERISK-24223
	  Review: https://reviewboard.asterisk.org/r/3979/
	  ........

	  Merged revisions 422664 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422665 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422683 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-05 12:45 +0000 [5a1de68b9a]  Richard Mudgett <rmudgett@digium.com>

	* devicestate.c: Minor tweaks

	  * In ast_state_chan2dev() use ARRAY_LEN() instead of a sentinel value in
	  chan2dev[].

	  * Fix some comments in chan_iax2.c.
	  ........

	  Merged revisions 422661 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422663 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-05 08:29 +0000 [2362d88a18]  Kinsey Moore <kmoore@digium.com>

	* Menuselect: Fix incorrect enabling on failed deps

	  This corrects a situation where menuselect can incorrectly enable a
	  module by default that has defaultenabled set to "no" and has
	  failed/non-selected dependencies. The bug is due to an inverted test
	  when checking for whether the given module should be set to enabled by
	  default on load.

	  Review: https://reviewboard.asterisk.org/r/3975/
	  Reported by: John Bigelow
	  ........

	  Merged revisions 422646 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422647 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-04 17:05 +0000 [af75e45da1]  Jonathan Rose <jrose@digium.com>

	* Manager: Require read permission for SYSTEM in order to send FullyBooted

	  Review: https://reviewboard.asterisk.org/r/3969/
	  ........

	  Merged revisions 422584 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 422625 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 422626 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422631 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422632 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-03 09:05 +0000 [3cd36d0e10]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_transport_websocket: Fix crash when the Contact header is not a URI.

	  The code for changing the Contact header wrongly assumed that the Contact
	  would always contain a URI. This is incorrect.

	  ASTERISK-24271
	  Reported by: Dafi Ni
	  ........

	  Merged revisions 422557 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422558 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422559 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-02 15:29 +0000 [1b64f353f1]  Mark Michelson <mmichelson@digium.com>

	* Resolve race condition where channels enter dialplan application before media has been negotiated.

	  Testsuite tests will occasionally fail because on reception of a 200 OK SIP response,
	  an AST_CONTROL_ANSWER frame is queued prior to when media has finished being
	  negotiated. This is because session supplements are called into before PJSIP's
	  inv_session code has told us that media has been updated. Sometimes the queued answer
	  frame is handled by the PBX thread before the ensuing media negotiations occur, causing
	  a test failure.

	  As it turns out, there is another place that session supplements could be called into, which is
	  after media has finished getting negotiated. What this commit introduces is a means for session
	  supplements to indicate when they wish to be called into when handling an incoming SIP response.
	  By default, all session supplements will be run at the same point that they were prior to this
	  commit. However, session supplements may indicate that they wish to be handled earlier than
	  normal on redirects, or they may indicate they wish to be handled after media has been negotiated.

	  In this changeset, two session supplements have been updated to indicate a preference for when
	  they should be run: res_pjsip_diversion executes before handling redirection in order to get
	  information from the Diversion header, and chan_pjsip now handles responses to INVITEs after
	  media negotiation to fix the race condition mentioned previously.

	  ASTERISK-24212 #close
	  Reported by Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/3930
	  ........

	  Merged revisions 422536 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422542 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422543 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-01 10:25 +0000 [897cbf6a4f]  Matt Jordan <mjordan@digium.com>

	* main/cli: Do not attempt to show CDR data for internal channels

	  Internal channels don't have CDRs. Querying the CDR engine for their variables
	  will make it cranky.
	  ........

	  Merged revisions 422506 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422507 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422524 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-09-01 09:15 +0000 [df5dbbd878]  Matt Jordan <mjordan@digium.com>

	* res_stasis: Don't play MoH to channels by default when added to holding bridges

	  When ARI manipulates a bridge, it generally doesn't care what the mixing
	  technology is. Operations on a bridge initiated through ARI should perform
	  their action in generally the same way, regardless of the bridge's mixing
	  technology. While the mixing technology may determine how media flows to
	  channels, the actual operations on a bridge themselves should be the same.

	  Currently, this isn't the case with holding bridges. When a channel joins
	  without a role, MoH is started on that channel automatically. Subsequent bridge
	  operations that would stop MoH would fail (as there is no Announcer channel
	  playing MoH to the bridge). Starting MoH on the bridge will also create two
	  MoH streams: one from the MoH being played on the participant channel, and one
	  from the announcer channel. From the perspective of ARI users, this is
	  counter-intuitive - I would not expect MoH to be started for me. The mixing
	  technology determines how media is shared between participants, not the
	  application experience.

	  This patch does the following:
	   * The Stasis bridge class now inspects channels as they are going into a
	     bridge. If the bridge has a holding capability, and the channel has no
	     roles, we give it a participant role and mark the default behaviour to have
	     no entertainment. This allows addChannel operations to continue to set a
	     participant role with an entertainment option if it felt like it (or could
	     do it).
	   * The music on hold channel is now Stasis approved (tm)

	  Review: https://reviewboard.asterisk.org/r/3929/

	  ASTERISK-24264 #close
	  Reported by: Samuel Galarneau
	  Tested by: Samuel Galarneau 
	  ........

	  Merged revisions 422503 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422504 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422505 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-30 12:33 +0000 [5aefecd81e]  gtjoseph <george.joseph@fairview5.com>

	* confbridge: Add Duration to ConfbridgeList event

	  The ConfbridgeList event doesn't include how long the user has been a
	  member of the conference.  This patch adds Duration (seconds) which
	  is based on user->chan->answertime.

	  Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3955/
	  ........

	  Merged revisions 422444 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422445 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422446 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-30 12:24 +0000 [59d4dbd3d0]  gtjoseph <george.joseph@fairview5.com>

	* manager: Make WaitEvent action respect eventfilters

	  A WaitEvent issued via an http session isn't respecting eventfilters defined
	  for the user. I just added a match_filter to the predicate that controls
	  astman_append.

	  Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3958/
	  ........

	  Merged revisions 422439 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 422440 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 422441 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422442 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422443 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-29 14:40 +0000 [664f83a03b]  Jeremy Laine (License 6561)

	* doc: Add a manpage for the smsq utility

	  This patch adds a manpage for the smsq utility. Note that this is one of
	  the patches the Debian distro applies for the Asterisk project, as per
	  ASTERISK-24191.

	  Review: https://reviewboard.asterisk.org/r/3895/

	  ASTERISK-24171 #close
	  Reported by: Jeremy Laine
	  patches:
	    smsq.8 uploaded by Jeremy Laine (License 6561)
	  ........

	  Merged revisions 422376 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 422377 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 422378 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422379 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422380 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-29 14:35 +0000 [81598fa082]  Jeremy Laine (License 6561)

	* doc: Add a manpage for the aelparse utility

	  This patch adds a manpage for the aelparse utility. Note that this is one of
	  the patches the Debian distro applies for the Asterisk project, as per
	  ASTERISK-24191.

	  Review: https://reviewboard.asterisk.org/r/3896/

	  ASTERISK-24171 #close
	  Reported by: Jeremy Laine
	  patches:
	    aelparse.8 uploaded by Jeremy Laine (License 6561)
	  ........

	  Merged revisions 422371 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 422372 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 422373 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422374 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422375 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-29 13:46 +0000 [2df2d785b7]  Scott Griepentrog <sgriepentrog@digium.com>

	* The assertion that peer was not found on final event
	  message was being triggered on configuration reload.
	  This patch changes that case to just return instead.

	  Review: https://reviewboard.asterisk.org/r/3953/



	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422358 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-28 16:54 +0000 [3194892ea2]  Matt Jordan <mjordan@digium.com>

	* LICENSE: Clarify language in Asterisk's LICENSE to allow for linking to UniMRCP

	  The UniMRCP project distributes Asterisk modules that integrate Asterisk with
	  UniMRCP, and other Asterisk users use the UniMRCP library as well.
	  Unfortunately, the UniMRCP license is Apache 2.0, which per the Free Software
	  Foundation, is not a compatible license with the GPLv2.

	  "Please note that this license is not compatible with GPL version 2, because it
	  has some requirements that are not in that GPL version. These include certain
	  patent termination and indemnification provisions. The patent termination
	  provision is a good thing, which is why we recommend the Apache 2.0 license for
	  substantial programs over other lax permissive licenses."

	  On the other hand, UniMRCP is a great project and we'd like to let people use
	  it with Asterisk.

	  This patch updates the LICENSE text to allow users to link Asterisk with
	  UniMRCP and distribute the resulting binaries.
	  ........

	  Merged revisions 422293 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 422294 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 422295 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422296 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422297 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-28 15:31 +0000 [c5916fb39f]  Michael L. Young (license 5026)

	* chan_iax2: Fix Dynamic IAX2 Registrations After Temporary DNS Failure

	  The reporter on the issue found some issues when upgrading from version 10 to 11
	  on 55 hosts.

	  Two situations that can occur with dynamic registrations.

	  1.  With dnsmgr disabled, if the host is not resolvable we are not trying to
	      resolve the host again when it is time to attempt to register again.  This
	      results in never registering to the host.
	  2.  With dnsmgr enabled, when the host is temporarily not resolvable the
	      address is set to 0.0.0.0:0 and then when the host is resolvable the port
	      is not being restored and stays set to 0.

	  This patch resolves these two issues by:

	  * Storing the hostname so that it can be used for resolving with DNS.
	  * Resolve the hostname on the next scheduled attempt to register.
	  * Storing the port used to reach the host so that when the hostname is
	    resolvable again, we can set the port again if the port is still unset after
	    looking up the host.

	  ASTERISK-23767 #close
	  Reported by: David Herselman
	  Tested by: David Herselman, Michael L. Young
	  Patches:
	      asterisk-23767-dns_reg_retry_and_set_port_11_v3.diff
	                                       uploaded by Michael L. Young (license 5026)

	  Review: https://reviewboard.asterisk.org/r/3856/
	  ........

	  Merged revisions 422274 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 422275 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422276 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422277 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-28 12:29 +0000 [4e750a26fd]  Richard Mudgett <rmudgett@digium.com>

	* Added ConfBridge AMI event note to UPGRADE.txt.
	  ........

	  Merged revisions 422255 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422256 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422257 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-28 11:06 +0000 [ef28cc0d43]  Paul Belanger

	* chan_sip.c: Add 'rtpbindaddr' setting

	  Users now have the ability to bind the rtpengine instance to a specific IP
	  address.  For example, you want chan_sip (call control) on eth0 but rtp (media)
	  on eth1.

	  ASTERISK-24280 #close
	  Reported by: Paul Belanger
	  Tested by: Paul Belanger
	  Review: https://reviewboard.asterisk.org/r/3952/
	  Patches:
	      rtpengine.diff uploaded by Paul Belanger


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422241 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-28 10:50 +0000 [327d67270f]  Mark Michelson <mmichelson@digium.com>

	* Fix bug that did not allow for multiple batched RLS notifications to be sent.

	  A misunderstanding of how the scheduler worked caused further batched notifications
	  beyond the first not to get scheduled. Now we reset our scheduler ID to -1 after
	  the batched notification is sent. This way, further notifications can be scheduled
	  when they arise.
	  ........

	  Merged revisions 422239 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422240 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-27 19:44 +0000 [94e1b4a8a4]  Richard Mudgett <rmudgett@digium.com>

	* res/res_pjsip/pjsip_options.c: Eliminate excessive RAII_VAR usage.

	  * Fix off nominal ref leak in find_or_create_contact_status().

	  * Add missing NULL check of status in update_contact_status() and
	  init_start_time().
	  ........

	  Merged revisions 422214 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422215 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422216 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-27 19:16 +0000 [4728c05957]  Richard Mudgett <rmudgett@digium.com>

	* sched: Fix typo and whitespace change.
	  ........

	  Merged revisions 422200 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422201 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-27 12:30 +0000 [7c1a22fba7]  gtjoseph <george.joseph@fairview5.com>

	* confbridge: Add 'Admin' param to join, leave, mute, unmute and talking events

	  Currently there's no way to tell if a user is an admin or not when receiving
	  the join, leave, mute, unmute and talking events.  This patch adds that
	  capability.

	  Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3950/
	  ........

	  Merged revisions 422176 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422177 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422178 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-27 10:39 +0000 [bf85018107]  Kinsey Moore <kmoore@digium.com>

	* CallerID: Fix parsing of malformed callerid

	  This allows the callerid parsing function to handle malformed input
	  strings and strings containing escaped and unescaped double quotes.
	  This also adds a unittest to cover many of the cases where the parsing
	  algorithm previously failed.

	  Review: https://reviewboard.asterisk.org/r/3923/
	  Review: https://reviewboard.asterisk.org/r/3933/
	  ........

	  Merged revisions 422112 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 422113 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 422114 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422154 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422158 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-26 18:30 +0000 [d199536a04]  gtjoseph <george.joseph@fairview5.com>

	* confbridge: Make kick, mute and unmute handle channel targets consistently.

	  Kick, mute and unmute were a little inconsistent in their handling of channel
	  targets.  This patch cleans that up by insuring they all handle the 'all'
	  target consistently and adds the 'participants' target which acts on
	  non-admins.  Documentation for kick was also cleaned up as it never
	  supported partial channel names.

	  Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3944/
	  ........

	  Merged revisions 422090 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422091 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422092 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-26 17:14 +0000 [c5ab4adf17]  Mark Michelson <mmichelson@digium.com>

	* Fix race condition in the scheduler when deleting a running entry.

	  When scheduled tasks run, they are removed from the heap (or hashtab).
	  When a scheduled task is deleted, if the task can't be found in the
	  heap (or hashtab), an assertion is triggered. If DO_CRASH is enabled,
	  this assertion causes a crash.

	  The problem is, sometimes it just so happens that someone attempts
	  to delete a scheduled task at the time that it is running, leading
	  to a crash. This change corrects the issue by tracking which task
	  is currently running. If that task is attempted to be deleted,
	  then we mark the task, and then wait for the task to complete.
	  This way, we can be sure to coordinate task deletion and memory
	  freeing.

	  ASTERISK-24212
	  Reported by Matt Jordan

	  Review: https://reviewboard.asterisk.org/r/3927
	  ........

	  Merged revisions 422070 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 422071 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422072 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-25 11:45 +0000 [fefa6fba82]  Richard Mudgett <rmudgett@digium.com>

	* res_musiconhold.c: Release any format refs before memset().

	  * Clear the channel music_state pointer before destroying the music_state
	  object for safety.
	  ........

	  Merged revisions 422037 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422038 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-25 11:16 +0000 [2b19d94a71]  Richard Mudgett <rmudgett@digium.com>

	* res_musiconhold: Fix MOH restarting where it left off from the last hold.

	  Restore code removed by https://reviewboard.asterisk.org/r/3536/ that
	  introduced a regression that prevents MOH from restarting were it left off
	  the last time.

	  ASTERISK-24019 #close
	  Reported by: Jason Richards
	  Patches:
	        jira_asterisk_24019_v1.8.patch (license #5621) patch uploaded by rmudgett

	  Review: https://reviewboard.asterisk.org/r/3928/
	  ........

	  Merged revisions 421976 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421977 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421978 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421979 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421980 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-24 14:37 +0000 [497a92d079]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_transport_websocket: Attach the Websocket module on outgoing INVITEs.

	  In order to alter the Contact header on in-dialog requests and responses the
	  Websocket module must be attached on outgoing INVITEs. The Contact header is
	  modified so that the PJSIP transport layer can find and use the existing
	  Websocket connection based on the source IP address, port, and transport.

	  ASTERISK-24143 #close
	  Reported by: Aleksei Kulakov
	  ........

	  Merged revisions 421955 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421956 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421957 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-24 14:21 +0000 [477e2e6edb]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_transport_websocket: Fix a progressive memory growth.

	  The packet structure used to receive messages was using the transport
	  pool. This meant that for each parsing the pool would grow accordingly.
	  Since memory can not be reclaimed without resetting it this would
	  cause the memory pool to grow and grow.

	  This change uses a specific memory pool for the packet structure and
	  resets it to a fresh state after the message has been received and
	  handled.
	  ........

	  Merged revisions 421939 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421945 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421950 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-24 13:54 +0000 [2c0cbf8e64]  Joshua Colp <jcolp@digium.com>

	* res_pjsip_transport_websocket: Ensure secure Websocket clients can be called.

	  This change enforces the transport in the Contact header for Websocket clients.
	  Previously a client may provide a transport of 'ws' when it is actually using
	  a transport of 'wss'. This would cause outgoing calls to fail as the existing
	  connection could not be found.
	  ........

	  Merged revisions 421931 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421932 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421933 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-24 12:22 +0000 [cee660dadf]  Badalian Vyacheslav (license 5249)

	* chan_sip: Use the server reflexive ICE candidate RTCP port as provided.

	  This code originally worked around an issue within res_rtp_asterisk itself.
	  The wrong socket was being used for the STUN check for RTCP, causing the
	  port to be the same as RTP. This was subsequently fixed and the RTCP port
	  provided for the ICE candidate is correct and does not need to be incremented.

	  ASTERISK-23997 #close
	  Reported by: Badalian Vyacheslav
	  Patches:
	   plus1.diff submitted by Badalian Vyacheslav (license 5249)
	  ........

	  Merged revisions 421909 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421910 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421911 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421912 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-22 11:56 +0000 [dcfffce66d]  Mark Michelson <mmichelson@digium.com>

	* Fix a locking inversion in MixMonitor.

	  We need to unlock the audiohook before trying to lock
	  the channel, since the correct locking order is channel
	  then audiohook.
	  ........

	  Merged revisions 421882 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421883 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-22 11:52 +0000 [33835e17a0]  Jonathan Rose <jrose@digium.com>

	* ARI: Fix a crash caused by hanging during playback to a channel in a bridge

	  ASTERISK-24147 #close
	  Reported by: Edvin Vidmar
	  Review: https://reviewboard.asterisk.org/r/3908/
	  ........

	  Merged revisions 421879 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421880 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421881 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-22 09:09 +0000 [1498ae0830]  Matt Jordan <mjordan@digium.com>

	* main/message: Add a new-line to a DEBUG message
	  ........

	  Merged revisions 421859 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421860 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421861 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 17:09 +0000 [f8c4fc1121]  Richard Mudgett <rmudgett@digium.com>

	* res_musiconhold.c: Remove obsolete REF_DEBUG code.

	  Remove unneeded code that writes to the wrong file location in an obsolete
	  format.
	  ........

	  Merged revisions 421799 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421800 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421801 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421802 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421803 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 16:43 +0000 [644e693645]  Mark Michelson <mmichelson@digium.com>

	* Switch from hostname to an IP address in the SDP origin line.

	  Using the hostname in the SDP origin line may not satisfy the requirement
	  of RFC 4566 that we use a FQDN or IP address. This change has us use the
	  same information from the SDP connection line if possible. If not possible,
	  we'll use the configured media address. And if that's not possible, we use
	  the result of a PJLIB call to get the IP address of ourself.

	  ASTERISK-23994 #close
	  Reported by Private Name

	  Review: https://reviewboard.asterisk.org/r/3925
	  ........

	  Merged revisions 421796 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421797 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421798 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 16:37 +0000 [56a1d4930a]  Mark Michelson <mmichelson@digium.com>

	* Ensure after-bridge behavior is correct when moving from Stasis to a non-Stasis bridge.

	  Because of the departable state of channels that enter Stasis bridges, Stasis has to
	  take responsibility for directing the channel to its intended after-bridge destination
	  if the channel moves from a Stasis bridge to a non-Stasis bridge. This change ensures
	  that when such a move occurs, when the channel leaves the bridging system, any after
	  bridge gotos are honored.

	  Review: https://reviewboard.asterisk.org/r/3920
	  ........

	  Merged revisions 421792 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421794 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421795 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 16:35 +0000 [4946981646]  Jonathan Rose (license 6182)

	* res_musiconhold: Fix reference leaks caused when reloading with REF_DEBUG set

	  Due to a faulty function for debugging reference decrementing, it was possible
	  to reduce the refcount on the wrong object if two moh classes of the same name
	  were in the moh class container.

	  (closes issue ASTERISK-22252)
	  Reported by: Walter Doekes
	  Patches:
	      18_moh_debug_ref_patch.diff Uploaded by Jonathan Rose (license 6182)
	  ........

	  Merged revisions 398937 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421777 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421779 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421788 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421793 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 16:28 +0000 [12d34bb12f]  Mark Michelson <mmichelson@digium.com>

	* Let's try checking the name and number, instead of the name twice.
	  ........

	  Merged revisions 421789 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421790 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421791 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 16:19 +0000 [2150daf748]  Mark Michelson <mmichelson@digium.com>

	* Improve consistency of party ID privacy usage.

	  Prior to this change, the Remote-Party-ID header took the position of
	  "If caller name and number are not explicitly allowed, then they are private"
	  and P-Asserted-Identity took the position of
	  "Caller name and number are only private if marked explicitly so"

	  Now both mechanisms of conveying party identification use the former approach.
	  ........

	  Merged revisions 421778 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421783 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421785 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 12:35 +0000 [77ddc5b713]  Elazar Broad (License 5835)

	* chan_sip: Don't use port derived from fromdomain if it isn't set

	  If a user does not provide a port in the fromdomain setting, chan_sip will set
	  the fromdomainport to STANDARD_SIP_PORT (5060). The fromdomainport value will
	  then get used unilaterally in certain places. This causes issues with TLS,
	  where the default port is expected to be 5061.

	  This patch modifies chan_sip such that fromdomainport is only used if it is
	  not the standard SIP port; otherwise, the port from the SIP pvt's recorded
	  self IP address is used.

	  Review: https://reviewboard.asterisk.org/r/3893/

	  ASTERISK-24178 #close
	  Reported by: Elazar Broad
	  patches:
	    fromdomainport_fix.diff uploaded by Elazar Broad (License 5835)
	  ........

	  Merged revisions 421717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421718 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421719 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421720 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421721 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 10:25 +0000 [f3a525e9a6]  Matt Jordan <mjordan@digium.com>

	* ARI: Fix implicit answer when playback is initiated on unanswered channel

	  When issuing a POST /channels/{channel_id}/play on a channel that is not
	  yet answered, ARI is supposed to:
	  * Queue up an AST_CONTROL_PROGRESS on the channel
	  * Start up the playback of the media

	  Instead, we sneak an answer on the channel right before starting playing media.

	  This is due to ARI's usage of control_streamfile. This function implicitly
	  answers the channel (and doesn't give ARI the option to stop it). The answering
	  of the channel here is probably unnecessary:
	  * app_voicemail, by far the biggest consumer of this function, always answers
	    the channels anyway
	  * control stream file (in res_agi) and ControlPlayback probably shouldn't be
	    implicitly answering the channel. Answering should not be tied directly to
	    playing back media.

	  As it turns out, the answering of the channel here is pretty old:
	  356042    twilson       if (ast_channel_state(chan) != AST_STATE_UP) {
	    3087      anthm               res = ast_answer(chan);
	  180259   tilghman       }

	  (As in, ancient?)

	  Note that others ran into this problem and commented about it on various
	  mailing lists.

	  Review: https://reviewboard.asterisk.org/r/3907/

	  ASTERISK-24229 #close
	  Reported by: Matt Jordan
	  ........

	  Merged revisions 421695 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421696 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421699 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 09:52 +0000 [085d5a2629]  Shaun Ruffell (License 5417)

	* Clean up files that do not end with newlines

	  Trivial patch to add new lines to several files missing them. This fixes
	  warnings when compiling with gcc 4.1.2 on CentOS 5.

	  ASTERISK-24245 #close
	  Reported by: Shaun Ruffell
	  patches:
	    0002-Trivial-addition-of-newlines-at-end-of-three-files.patch uploaded by Shaun Ruffell (License 5417)
	  ........

	  Merged revisions 421677 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421678 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421679 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-21 09:42 +0000 [da91946df7]  Shaun Ruffell (License 5417)

	* uri: Quiet warning about type qualifiers ignored on function return type

	  This patch fixes gcc warnings that occur due to the type qualifier 'const'
	  being ignored on a return type of int.

	  ASTERISK-24246 #close
	  Reported by: Shaun Ruffell
	  patches:
	    0001-main-uri-Quiet-warning-about-ignored-attribute-on-re.patch uploaded by Shaun Ruffell (License 5417)
	  ........

	  Merged revisions 421675 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421676 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-20 17:52 +0000 [b7f98c3da4]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip: Update media translation paths when new SDP negotiated.

	  On a SIP reinvite that changes media strams, the PJSIP channel driver was
	  flooding the log with "Asked to transmit frame type %s, while native
	  formats is %s" warnings.

	  * Fixes PJSIP not setting up translation paths when the formats change on
	  a reinvite.  AFS-63 was effectively reintroduced because of the media
	  formats work.  res_pjsip_sdp_rtp.c:set_caps()

	  * Improved the unexpected frame format WARNING message to include more
	  information.

	  * Added protective locking while altering formats on a channel.  Reworked
	  set_format() to simplify and protect the formats under manipulation.

	  * Restored some code that got lost in the media_formats work.
	  (channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())

	  AFS-137 #close
	  Reported by: Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/3906/
	  ........

	  Merged revisions 421645 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421646 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-20 17:23 +0000 [4672c139dd]  Richard Mudgett <rmudgett@digium.com>

	* cli.c: Fix tab completion of "module load" when MALLOC_DEBUG is enabled.

	  filename_completion_function() returns memory that was not allocated by
	  the MALLOC_DEBUG allocation tracker so the memory must be freed by
	  ast_std_free().
	  ........

	  Merged revisions 421600 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421602 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421608 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421616 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421623 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-20 15:41 +0000 [49f8bd4ad4]  Mark Michelson <mmichelson@digium.com>

	* Set the role for inbound subscriptions correctly.

	  This was causing the AMI show_subscriptions test in
	  the testsuite to fail since all subscriptions were being
	  seen as subscribers instead of notifiers.
	  ........

	  Merged revisions 421585 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421586 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-20 15:04 +0000 [d0640ad7df]  Mark Michelson <mmichelson@digium.com>

	* Move evaluation of set_var options in pjsip to the end of channel initialization.

	  This allows for set_var to override certain defaults such as caller ID and codec
	  values. This also fixes a test suite regression. The "set_var" test suite test attempted
	  to use set_var to override caller ID, but a recent change caused that to no longer work.
	  ........

	  Merged revisions 421565 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421566 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421567 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-20 08:06 +0000 [36f4bff943]  Kinsey Moore <kmoore@digium.com>

	* Stasis: Add information to blind transfer event

	  When a blind transfer occurs that is forced to create a local channel
	  pair to satisfy the transfer request, information about the local
	  channel pair is not published. This adds a field to describe that
	  channel to the blind transfer message struct so that this information
	  is conveyed properly to consumers of the blind transfer message.

	  This also fixes a bug in which Stasis() was unable to properly identify
	  the channel that was replacing an existing Stasis-controlled channel
	  due to a blind transfer.

	  Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/3921/
	  ........

	  Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421538 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421539 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-20 07:39 +0000 [01f1ff1f77]  Kinsey Moore <kmoore@digium.com>

	* AMI: Add AllVariables parameter to Status

	  This adds the AllVariables parameter to the Status AMI action such that
	  if defined and set to "true", all channel variables will be reported in
	  the subsequent Status event(s). This parameter does not negate the
	  functionality of the "Variables" parameter so that global variables and
	  dialplan functions can be requested.

	  Review: https://reviewboard.asterisk.org/r/3915/


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421534 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-19 15:28 +0000 [76290adf50]  Mark Michelson <mmichelson@digium.com>

	* Alter documentation for callerid_privacy to use correct values.
	  ........

	  Merged revisions 421485 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421488 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421490 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-19 14:55 +0000 [28a89e7685]  Mark Michelson <mmichelson@digium.com>

	* Fix compilation error on certain versions of GCC.
	  ........

	  Merged revisions 421447 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421448 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421449 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-19 14:43 +0000 [a85a483fcd]  Kinsey Moore <kmoore@digium.com>

	* AMI Docs: Fix Status channel parameter optionality
	  ........

	  Merged revisions 421442 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421443 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421444 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421445 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421446 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-19 11:36 +0000 [222b5cd036]  Krandon Bruse (license 6631)

	* ARI: Fix a bug where /channels/{channelID}/continue doesn't execute PBX

	  If /channels/{channelID}/continue is called on a channel that was originated
	  without a PBX (such as the ARI command POST channel with a stasis application
	  argument), the channel will not start dialplan execution. This patch will now
	  run the PBX out of the stasis execution if the channel doesn't currently have
	  an active PBX upon continuing.

	  ASTERISK-24043 #close
	  Reported by: Krandon Bruse
	  Review: https://reviewboard.asterisk.org/r/3917/
	  Patches:
	      stasis-continue.diff submitted by Krandon Bruse (license 6631)
	  ........

	  Merged revisions 421416 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421423 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421424 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-19 11:16 +0000 [83a9b91da9]  Richard Mudgett <rmudgett@digium.com>

	* chan_pjsip: Fix attended transfer connected line name update.

	  A calls B
	  B answers
	  B SIP attended transfers to C
	  C answers, B and C can see each other's connected line information
	  B completes the transfer
	  A has number but no name connected line information about C
	    while C has the full information about A

	  I examined the incoming and outgoing party id information handling of
	  chan_pjsip and found several issues:

	  * Fixed ast_sip_session_create_outgoing() not setting up the configured
	  endpoint id as the new channel's caller id.  This is why party A got
	  default connected line information.

	  * Made update_initial_connected_line() use the channel's CALLERID(id)
	  information.  The core, app_dial, or predial routine may have filled in or
	  changed the endpoint caller id information.

	  * Fixed chan_pjsip_new() not setting the full party id information
	  available on the caller id and ANI party id.  This includes the configured
	  callerid_tag string and other party id fields.

	  * Fixed accessing channel party id information without the channel lock
	  held.

	  * Fixed using the effective connected line id without doing a deep copy
	  outside of holding the channel lock.  Shallow copy string pointers can
	  become stale if the channel lock is not held.

	  * Made queue_connected_line_update() also update the channel's
	  CALLERID(id) information.  Moving the channel to another bridge would need
	  the information there for the new bridge peer.

	  * Fixed off nominal memory leak in update_incoming_connected_line().

	  * Added pjsip.conf callerid_tag string to party id information from
	  enabled trust_inbound endpoint in caller_id_incoming_request().

	  AFS-98 #close
	  Reported by: Mark Michelson

	  Review: https://reviewboard.asterisk.org/r/3913/
	  ........

	  Merged revisions 421400 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421403 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421404 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-18 16:18 +0000 [c4c9d4ad6c]  Damien Wedhorn <voip@facts.com.au>

	* Skinny: Fixup compile warning for non dev-mode.
	  ........

	  Merged revisions 421376 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421380 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-18 15:20 +0000 [1de8b8035e]  gtjoseph <george.joseph@fairview5.com>

	* func_config: Change 'Not Found' message from ERROR to DEBUG

	  When you call the CONFIG dialplan function with the name of a variable that
	  doesn't exist in the target context you get an ERROR.  This does nothing but
	  clutter up the logs with messages that may be perfectly acceptable.  Just
	  because a variable wasn't in the context doesn't mean it's an error.  Maybei
	  t's optional or just needs to be defaulted or ignored.

	  This patch changes the log level from ERROR to DEBUG.  If a dialplan developer
	  wants to debug their dialplan they still canby setting the console debug level 
	  as needed.

	  Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3919/
	  ........

	  Merged revisions 421327 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421328 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421329 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421337 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421341 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-17 20:14 +0000 [bb494067a5]  Matt Jordan <mjordan@digium.com>

	* Multiple revisions 421311-421312

	  ........
	    r421311 | mjordan | 2014-08-17 20:11:28 -0500 (Sun, 17 Aug 2014) | 9 lines
	    
	    res/ari/resource_channels: Don't return allocation failure on failed function
	    
	    If a function fails to execute, it is most likely due to one of two reasons:
	    (1) The function doesn't exist or can't be read from
	    (2) The function is dangerous and is restricted based on the user's permissions
	    
	    Currently we return allocation failure, which is incorrect. This updates the
	    reason code to more accurately reflect why the request failed.

	    ASTERISK-24215
	  ........
	    r421312 | mjordan | 2014-08-17 20:13:41 -0500 (Sun, 17 Aug 2014) | 4 lines
	    
	    res/ari/resource_channels: Fix compilation issue
	    
	    Forgot a parameter. Whoops.
	  ........

	  Merged revisions 421311-421312 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421313 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-17 19:57 +0000 [ba5d5da60b]  Matt Jordan <mjordan@digium.com> (License #6283)

	* Improve call forwarding reporting, especially with regards to ARI.

	  This patch addresses a few issues:

	  1) The order of Dial events have been changed when performing a call forward.
	     The order has now been altered to
	      1) Dial begins dialing channel A.
	      2) When A forwards the call to B, we issue the dial end event to channel
	         A, indicating the dial is being canceled due to a forward to B.
	      3) When the call to channel B occurs, we then issue a new dial begin to
	         channel B.

	  2) Call forwards are now reported on the calling channel, not the peer channel.

	  3) AMI DialEnd events have been altered to display the extension the call is
	     being forwarded to when relevant.

	  4) You can now get the values of channel variables for channels that are not
	     currently in the Stasis application. This brings the retrieval of channel
	     variables more in line with the rest of channel read operations since they
	     may be performed on channels not in Stasis.

	  ASTERISK-24134 #close
	  Reported by Matt Jordan

	  ASTERISK-24138 #close
	  Reported by Matt Jordan

	  Patches:
	  	forward-shenanigans.diff uploaded by Matt Jordan (License #6283)

	  Review: https://reviewboard.asterisk.org/r/3899
	  ........

	  Merged revisions 420794 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421310 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-17 18:29 +0000 [6525f374db]  Matt Jordan <mjordan@digium.com>

	* apps/app_meetme: Fix crash when publishing MeetMe messages with no channel

	  The same function, meetme_stasis_generate_msg, handles creating and publishing
	  Stasis message both when there are channels in the MeetMe conference and when
	  there are no channels in the conference. When the performance improvement was
	  made to use cached snapshots, this created a situation where Asterisk would
	  crash: obtaining a cached snapshot is not NULL tolerant.

	  This patch restores the previous implementation, which used a NULL safe set
	  of routines to produce a blob containing the channel snapshot (if available)
	  and information about the MeetMe conference.

	  ASTERISK-24234 #close
	  Reported by: Shaun Ruffell
	  Tested by: Shaun Ruffell
	  ........

	  Merged revisions 421270 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421273 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421276 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-17 18:10 +0000 [44fc6ea6ff]  Richard Mudgett <rmudgett@digium.com> (License 5621)

	* apps/app_dial: Fix Dial 'z' option

	  The 'z' option is supposed to disable the dial timeout in the case of a call
	  forward. Unfortunately, the wrong timeout timer was passed to the do_forward
	  function, resulting in the option not working.

	  ASTERISK-24225 #close
	  Reported by: dimitripietro
	  Tested by: dimitripietro
	  patches:
	    jira_asterisk_24225_v1.8.patch uploaded by rmudgett (License 5621)
	    jira_asterisk_24225_v11.patch uploaded by rmudgett (License 5621)
	  ........

	  Merged revisions 421232 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421233 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421234 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421235 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421236 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-17 17:35 +0000 [98ca5c0b5f]  cloos <cloos@jhcloos.com> (License 5956)

	* configure: Undefine FORTIFY_SOURCE prior to defining it for patched gcc

	  Some distributions of Linux patch gcc to define FORTIFY_SOURCE when gcc is
	  executed with optimization. This "help" unfortunately results in re-definition
	  warnings when FORTIFY_SOURCE is later defined in Asterisk's build system. This
	  patch undefines FORTIFY_SOURCE prior to defining it to prevent this warning.

	  Review: https://reviewboard.asterisk.org/r/3912/

	  ASTERISK-24032 #close
	  Reported by: Kilburn
	  Tested by: Kilburn, wdoekes
	  patches:
	    1.8.diff uploaded by cloos (License 5956)
	    10.diff uploaded by cloos (License 5956)
	    11.diff uploaded by cloos (License 5956)
	    12.diff uploaded by cloos (License 5956)
	    13.diff uploaded by cloos (License 5956)
	  ........

	  Merged revisions 421227 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421228 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421229 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421230 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421231 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-17 11:11 +0000 [952da298ce]  Joshua Colp <jcolp@digium.com>

	* res_http_websocket: Include query parameters in client connection requests.

	  Review: https://reviewboard.asterisk.org/r/3914/
	  ........

	  Merged revisions 421210 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421211 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-15 12:26 +0000 [9b658b7c60]  Jonathan Rose <jrose@digium.com>

	* Bridging: Fix a behavioral change when checking if a channel is leaving a bridge

	  r420934 introduced some failures in the test suite.  Upon investigating, it was
	  discovered that differences in the way we were evaluating whether a channel was in
	  the process of leaving a bridge were causing some reinvites not to occur (mostly
	  reinvites back to Asterisk when ending a call). This patch fixes that behavioral
	  change.

	  ASTERISK-24027 #close
	  Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/3910/
	  ........

	  Merged revisions 421186 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421187 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421195 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-15 10:50 +0000 [0d0a616e1a]  Matt Jordan <mjordan@digium.com>

	* app_voicemail/app: Remove test events that were duplicated by r421059

	  Moving the test event raised when a file is played back (which occurred in
	  r421059) broke the ever loving snot out of the voicemail tests. This caused
	  duplicate test events to get raised, as app_voicemail and main/app were raising
	  events prior to call ast_streamfile. The voicemail tests did not enjoy getting
	  multiple events.

	  Since raising the playback event in ast_streamfile is far more useful to the
	  vast majority of tests, this patch keeps the call there and simply removes the
	  extraneous calls that duplicated the event.
	  ........

	  Merged revisions 421125 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421164 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421165 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421166 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421167 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-14 16:16 +0000 [980e49614c]  Matt Jordan <mjordan@digium.com>

	* res/res_hep_rtcp: Remove dependency on PJSIP

	  The res_hep_rtcp module was incorrectly including <pjsip.h>. This didn't need
	  to be included, as the module does not using PJPROJECT any fashion.
	  Unfortunately, because res_hep_rtcp did not include pjsip in its MODULEINFO as
	  a dependency, this also meant that res_hep_rtcp will fail to compile on a
	  system without PJPROJECT.

	  This patch removes the include.

	  Thanks to Damien Wedhorn for pointing this out in #asterisk-dev.

	  ASTERISK-24236 #close
	  Reported by: Damien Wedhorn, Matt Jordan
	  Tested by: Damien Wedhorn
	  ........

	  Merged revisions 421064 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421065 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421066 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-14 15:59 +0000 [513981c89d]  Matt Jordan <mjordan@digium.com>

	* main/file: Move test event to emit PLAYBACK event more consistently

	  This is being done in advance of the test for ASTERISK-23953
	  ........

	  Merged revisions 421059 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 421060 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 421061 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421062 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421063 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-14 14:21 +0000 [0b11c48522]  Matt Jordan <mjordan@digium.com>

	* cel: Make sure channels in extra fields include their unique IDs as well

	  CEL typically tracks a lot of information using the unique ID of the channel.
	  This is typically needed due to tying events together using the linked ID of
	  the various channels involved in a "call", which is derived from the channel ID
	  of the oldest channel involved in a bridge (or in the case of a Dial, the
	  parent channel).

	  Previously, we had updated the extra fields to include the involved channel
	  names, but forgot to put in the unique ID. This patch corrects that error.
	  ........

	  Merged revisions 421037 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421042 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421043 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-14 11:33 +0000 [79c5c08db9]  Richard Mudgett <rmudgett@digium.com>

	* ARI: Originate to app local channel subscription code optimization.

	  Reduce the scope of local_peer and only get it if the ARI originate is
	  subscribing to the channels.

	  Review: https://reviewboard.asterisk.org/r/3905/
	  ........

	  Merged revisions 421009 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 421010 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421012 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-14 11:01 +0000 [e4b32731b9]  Richard Mudgett <rmudgett@digium.com>

	* channel_internal_api.c: Replace some code with ao2_replace().

	  Use ao2_replace() instead of ao2_cleanup(); ao2_bump().

	  ao2_replace() has the advantange of not altering the ref count if the
	  replaced pointer is the same.

	  Review: https://reviewboard.asterisk.org/r/3904/
	  ........

	  Merged revisions 420992 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420993 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-13 12:05 +0000 [dd41d0ff01]  Richard Mudgett <rmudgett@digium.com>

	* res_pjsip_send_to_voicemail.c: Fix svn file properties.
	  ........

	  Merged revisions 420956 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420957 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420958 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-13 11:56 +0000 [6aa510b41f]  Kinsey Moore <kmoore@digium.com>

	* PJSIP: Prevent crash no-URI contacts

	  This prevents a crash from occurring when a contact with no URI is used
	  for the creation of an outbound out-of-dialog request with no
	  associated endpoint.
	  ........

	  Merged revisions 420949 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420950 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420953 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-13 11:24 +0000 [d4695774e7]  Jonathan Rose <jrose@digium.com>

	* Bridges: Fix feature interruption/unintended kick caused by external actions

	  If a manager or CLI user attached a mixmonitor to a call running a dynamic
	  bridge feature while in a bridge, the feature would be interrupted and the
	  channel would be forcibly kicked out of the bridge (usually ending the call
	  during a simple 1 to 1 call). This would also occur during any similar action
	  that could set the unbridge soft hangup flag, so the fix for this was to
	  remove unbridge from the soft hangup flags and make it a separate thing all
	  together.

	  ASTERISK-24027 #close
	  Reported by: mjordan
	  Review: https://reviewboard.asterisk.org/r/3900/
	  ........

	  Merged revisions 420934 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420940 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420947 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-13 09:31 +0000 [6a6702bb0f]  Kinsey Moore <kmoore@digium.com>

	* AMI: Improve documentation for Status action
	  ........

	  Merged revisions 420919 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420921 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-13 02:54 +0000 [52c94d3af4]  Walter Doekes <walter+asterisk@wjd.nu>

	* logger: Don't store verbose-magic in the log files.

	  In r399267, the verbose2magic stuff was edited. This time it results
	  in magic characters in the log files for multiline messages.

	  In trunk (and 13) this was fixed by the "stripping" of those
	  characters from multiline messages (in r414798).

	  This fix is altered to actually strip the characters and not replace
	  them with blanks.

	  Review: https://reviewboard.asterisk.org/r/3901/
	  Review: https://reviewboard.asterisk.org/r/3902/
	  ........

	  Merged revisions 420897 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 420898 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420899 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420900 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-12 18:45 +0000 [969982b878]  Richard Mudgett <rmudgett@digium.com>

	* chan_sip: Fix type mismatch when the format is changed.

	  Symptom is most likely an invalid ao2 object bad magic number message or a
	  less likely crash.
	  ........

	  Merged revisions 420881 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420882 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-12 18:36 +0000 [8526d967c9]  Richard Mudgett <rmudgett@digium.com>

	* res_stasis_snoop.c: Fix off nominial exit path leaving Snoop channel locked and not hungup.

	  * Made use ast_copy_string() instead of strcpy() for snoop uniqueid for
	  safety.  There is no guarantee that the max channel uniqueid length will
	  remain the same as the snoop uniqueid space.
	  ........

	  Merged revisions 420879 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420880 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-12 06:18 +0000 [ca61f8ac82]  Joshua Colp <jcolp@digium.com>

	* app_voicemail: Fix the "test_voicemail_vm_info" unit test.
	  ........

	  Merged revisions 420856 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420858 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-11 16:04 +0000 [aba07a0f6e]  Richard Mudgett <rmudgett@digium.com>

	* res/stasis/command.c: Fix recent commit using spaces instead of tabs.
	  ........

	  Merged revisions 420836 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420837 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420838 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-11 13:51 +0000 [ffccae8269]  Matt Jordan <mjordan@digium.com>

	* AMI/ARI: Update version to 2.5.0/1.5.0 respectively

	  This is to support the backwards compatible changes made in the next version
	  of Asterisk.
	  ........

	  Merged revisions 420805 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420808 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420811 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-11 13:46 +0000 [7a4691b425]  Kinsey Moore <kmoore@digium.com>

	* Stasis: Use the correct return value

	  Return the correct value instead of always returning 0 when setting
	  internal status on unreal channels.

	  Reported by: Richard Mudgett
	  ........

	  Merged revisions 420802 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420803 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420804 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-11 13:38 +0000 [6f735288b0]  Kinsey Moore <kmoore@digium.com>

	* Stasis: Allow internal channels directly into bridges

	  The patch to catch channels being shoehorned into Stasis() via external
	  mechanisms also happens to catch Announcer and Recorder channels
	  because they aren't known to be stasis-controlled channels in the usual
	  sense. This marks those channels as Stasis()-internal channels and
	  allows them directly into bridges.

	  Review: https://reviewboard.asterisk.org/r/3903/
	  ........

	  Merged revisions 420795 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420796 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420797 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-11 12:40 +0000 [db0a97f8ce]  Mark Michelson <mmichelson@digium.com>

	* Fix crashing unit tests with regards to RLS.

	  The unit tests require a sorcery.conf file that has been
	  set up to store resource lists in memory rather than retrieving
	  from configuration.

	  With a setup that is not conducive to running the tests, a fault
	  in sorcery currently causes Asterisk to crash when attempting to
	  run any of the tests.

	  To get around the crash, this adds a function that verifies the
	  current environment and marks the tests as "not run" if the setup
	  is not correct.
	  ........

	  Merged revisions 420779 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420780 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-11 11:03 +0000 [b4e33c81e3]  Mark Michelson <mmichelson@digium.com>

	* Fix crash encountered by the testsuite.

	  Running testsuite tests locally produced no errors, but when
	  run using the continuous integration framework, crashes occurred.

	  The crashes occurred due to a refcounting error that had been fixed
	  for a similar situation.
	  ........

	  Merged revisions 420758 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420759 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-11 08:57 +0000 [becf7c7003]  Matt Jordan <mjordan@digium.com>

	* res_hep: Remove disabling of modules

	  These modules were originally specified as being disabled, as they were
	  introduced midstream in Asterisk 12. That makes it nicer for folks who are
	  upgrading to a new release in the middle of Asterisk 12. That's not the case
	  for Asterisk 13: it's a brand new release. There's no reason to have the
	  modules disabled by default in that case.
	  ........

	  Merged revisions 420742 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420743 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-11 05:41 +0000 [1e0846167b]  Walter Doekes <walter+asterisk@wjd.nu>

	* general: Fix memory Corruption in __ast_string_field_ptr_build_va.

	  If the space left in a stringfield is between 0 and
	  (alignof(ast_string_field_allocation)-1) adding new data would cause
	  memory corruption, because we would assume enough space (unsigned
	  underrun).

	  Thanks Arnd Schmitter for reporting and finding out the cause!

	  ASTERISK-23508 #close
	  Reported by: Arnd Schmitter
	  Tested by: Arnd Schmitter, JoshE

	  Review: https://reviewboard.asterisk.org/r/3898/
	  ........

	  Merged revisions 420680 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 420715 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 420716 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420717 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420718 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-11 04:55 +0000 [b2afbc48e4]  Walter Doekes <walter+asterisk@wjd.nu>

	* tcptls: Avoid compiler warning on non-dev-mode.
	  ........

	  Merged revisions 420654 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........

	  Merged revisions 420655 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........

	  Merged revisions 420656 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420657 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420658 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-10 20:31 +0000 [6650704414]  Matt Jordan <mjordan@digium.com>

	* funcs/func_jitterbuffer: Tweak documentation

	  This patch merely reformats and cleans up a bit of the jitterbuffer
	  documentation for the wiki.
	  ........

	  Merged revisions 420639 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420640 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-10 19:14 +0000 [add46fd27c]  Michael K (License 6621)

	* app_queue: Add RealTime support for queue rules

	  This patch gives the optional ability to keep queue rules in RealTime. It is
	  important to note that with this patch:
	   (a) Queue rules in RealTime are only examined on module load/reload
	   (b) Queue rules are loaded both from the queuerules.conf file as well as the
	       RealTime backend
	  To inform app_queue to examine RealTime for queue rules, a new setting has been
	  added to queuerules.conf's general section "realtime_rules". RealTime queue
	  rules will only be used when this setting is set to "yes".

	  The schema for the database table supports a rule_name, time, min_penalty, and
	  max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or
	  '+' literal is provided. Otherwise, the penalties are treated as constants.

	  For example:
	  rule_name, time, min_penalty, max_penalty
	  'default', '10', '20', '30'
	  'test2', '20', '30', '55'
	  'test2', '25', '-11', '+1111'
	  'test2', '400', '112', '333'
	  'test3', '0', '4564', '46546'
	  'test_rule', '40', '15', '50'

	  which would result in :

	  Rule: default
	   - After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust
	     QUEUE_MIN_PENALTY to 20
	  Rule: test2
	   - After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
	     QUEUE_MIN_PENALTY to 30
	   - After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust
	     QUEUE_MIN_PENALTY by -11
	   - After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
	     QUEUE_MIN_PENALTY to 112
	  Rule: test3
	   - After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust
	     QUEUE_MIN_PENALTY to 4564
	  Rule: test_rule
	   - After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust
	     QUEUE_MIN_PENALTY to 15

	  If you use RealTime, the queue rules will be always reloaded on a module
	  reload, even if the underlying file did not change. With the option disabled,
	  the rules will only be reloaded if the file was modified.

	  Review: https://reviewboard.asterisk.org/r/3607/

	  ASTERISK-23823 #close
	  Reported by: Michael K
	  patches:
	    app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621)
	  ........

	  Merged revisions 420624 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420625 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-10 17:02 +0000 [f7bb772804]  Matt Jordan <mjordan@digium.com>

	* Update CHANGES file
	  ........

	  Merged revisions 420609 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420610 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-10 16:35 +0000 [455243cdd4]  Matt Jordan <mjordan@digium.com>

	* Update UPGRADE-13.txt file

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420608 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-08 15:08 +0000 [3e452fa4d9]  Jason Parker <jparker@digium.com>

	* Fix build in devmode.
	  ........

	  Merged revisions 420592 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420593 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-08 14:16 +0000 [5ce4ad8031]  Jason Parker <jparker@digium.com>

	* app_voicemail: Add the ability to specify multiple email addresses.

	  ASTERISK-24045
	  Reported by: Jacob Barber
	  Review: https://reviewboard.asterisk.org/r/3833/
	  ........

	  Merged revisions 420577 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420578 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-08 12:53 +0000 [91f7b66183]  Matt Jordan <mjordan@digium.com>

	* chan_sip: Mark chan_sip and its files as extended support
	  ........

	  Merged revisions 420562 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420563 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-08 07:40 +0000 [86e927a714]  Matt Jordan <mjordan@digium.com>

	* make_ari_stubs: Update wiki prefix to '13'
	  ........

	  Merged revisions 420538 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420539 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-08 07:38 +0000 [1f35fccda1]  Matt Jordan <mjordan@digium.com>

	* res_ari_resource.c.mustache: Update template to emit module support level
	  ........

	  Merged revisions 420536 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420537 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-08 07:33 +0000 [008c1ad9bf]  Matt Jordan <mjordan@digium.com>

	* main/message: remove debug message
	  ........

	  Merged revisions 420533 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420534 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420535 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-07 22:07 +0000 [c94fef6f36]  Kinsey Moore <kmoore@digium.com>

	* CEL: Update unit tests for additional information

	  This updates the CEL unit tests for the new information contained in
	  the attended transfer CEL extra field.
	  ........

	  Merged revisions 420513 from http://svn.asterisk.org/svn/asterisk/branches/12
	  ........

	  Merged revisions 420514 from http://svn.asterisk.org/svn/asterisk/branches/13


	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420515 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-07 20:37 +0000 [96be6b2228]  Matt Jordan <mjordan@digium.com>

	* Initialize svnmerge from branches/13

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420499 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-07 20:36 +0000 [38a0df95b1]  Matt Jordan <mjordan@digium.com>

	* Remove 12 merge properties

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420498 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-08-07 20:33 +0000 [5760526f69]  Matt Jordan <mjordan@digium.com>

	* Update UPGRADE.txt for 13 branch

	  git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420497 65c4cc65-6c06-0410-ace0-fbb531ad65f3

2014-10-24  Asterisk Development Team <asteriskteam@digium.com>

	* Asterisk 13.0.0 Released.

2014-10-22 21:27 +0000 [r426097]  Shaun Ruffell <sruffell@digium.com>

	* codecs/codec_dahdi.c: codec_dahdi: Cannot use struct
	  ast_translator.core_{src,src}_codec. This fixes a Segmentation
	  fault introduced in r419044 "media formats: re-architect handling
	  of media for performance improvements". The problem is that
	  codec_dahdi was using core_src_codec and core_dst_codec in the
	  ast_translator structure when these fields were never set. Now
	  instead of trying to map the new core codec descriptions to the
	  way DAHDI defines different codecs, we will store the DAHDI
	  specific formats in 'struct translator' directly so we can refer
	  to them without mapping. This also allows us to remove the
	  "global_format_map" structure, since we can now query the list of
	  translators directly to make sure we do not ever register a DAHDI
	  based translator for a specific path more than once and eliminate
	  the need to keep the list and the map in sync. ASTERISK-24435
	  #close Reported by: Marian Koniuszko Review:
	  https://reviewboard.asterisk.org/r/4105/

2014-10-21 17:47 +0000 [r426079]  Richard Mudgett <rmudgett@digium.com>

	* main/translate.c: translage.c: Fix regression when generating
	  translation path strings. Fix the AMI Status action read and
	  write translation path strings from growing for each channel in
	  the status event list by reseting the ast string given to
	  ast_translate_path_to_str() to fill in the given translation
	  path.

2014-10-20 14:15 +0000 [r425991]  Matthew Jordan <mjordan@digium.com>

	* res/res_xmpp.c, main/tcptls.c, /: AST-2014-011: Fix POODLE
	  security issues There are two aspects to the vulnerability: (1)
	  res_jabber/res_xmpp use SSLv3 only. This patch updates the module
	  to use TLSv1+. At this time, it does not refactor
	  res_jabber/res_xmpp to use the TCP/TLS core, which should be done
	  as an improvement at a latter date. (2) The TCP/TLS core, when
	  tlsclientmethod/sslclientmethod is left unspecified, will default
	  to the OpenSSL SSLv23_method. This method allows for all
	  encryption methods, including SSLv2/SSLv3. A MITM can exploit
	  this by forcing a fallback to SSLv3, which leaves the server
	  vulnerable to POODLE. This patch adds WARNINGS if a user uses
	  SSLv2/SSLv3 in their configuration, and explicitly disables
	  SSLv2/SSLv3 if using SSLv23_method. For TLS clients, Asterisk
	  will default to TLSv1+ and WARN if SSLv2 or SSLv3 is explicitly
	  chosen. For TLS servers, Asterisk will no longer support SSLv2 or
	  SSLv3. Much thanks to abelbeck for reporting the vulnerability
	  and providing a patch for the res_jabber/res_xmpp modules.
	  Review: https://reviewboard.asterisk.org/r/4096/ ASTERISK-24425
	  #close Reported by: abelbeck Tested by: abelbeck, opsmonitor,
	  gtjoseph patches: asterisk-1.8-jabber-tls.patch uploaded by
	  abelbeck (License 5903) asterisk-11-jabber-xmpp-tls.patch
	  uploaded by abelbeck (License 5903) AST-2014-011-1.8.diff
	  uploaded by mjordan (License 6283) AST-2014-011-11.diff uploaded
	  by mjordan (License 6283) ........ Merged revisions 425987 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-19 17:07 +0000 [r425965]  George Joseph <george.joseph@fairview5.com>

	* Makefile, /, configure, include/asterisk/autoconfig.h.in,
	  configure.ac, makeopts.in: build: Force -fsigned-char on
	  platforms where the default for char is unsigned gcc on the ARM
	  platform defaults 'char' to 'unsigned char' whereas Intel and
	  SPARC default to 'signed char'. This is only an issue in the rare
	  cases where negative values are assigned to a 'char' but this
	  this patch insures compatibility by detecting platforms that
	  default to 'unsigned' and adding an '-fsigned-char' flag to
	  _ASTCFLAGS. If compiling for ARM (native or cross-compile) be
	  sure to run ./bootstrap.sh and ./configure to regenerate the
	  build files. You shouldn't have to do this for Intel or SPARC.
	  Tested-by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/4091/ ........ Merged
	  revisions 425964 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-19 04:01 +0000 [r425923-425944]  Matthew Jordan <mjordan@digium.com>

	* res/res_pjsip_sdp_rtp.c: res/res_pjsip_sdp_rtp: Revert 425922
	  This patch for r425922 introduced a bug, wherein sending an
	  INVITE request with no SDP would cause Asterisk to not send an
	  SDP Offer in the 200 OK. The current structure of
	  res_pjsip_sdp_rtp is a bit hard to deal with to fix this, as
	  create_outgoing_sdp has no knowledge of whether or not it is
	  creating an SDP as a new Offer or an Answer. This is something of
	  an oversight in the callback definition, as the caller of it does
	  have this information.

	* res/res_pjsip_sdp_rtp.c: res/res_pjsip_sdp_rtp: Remove left over
	  reference to override_prefs The usage of the local override_prefs
	  variable in create_outgoing_sdp_stream was previously to track an
	  override format preference set by PJSIP_MEDIA_OFFER. Now,
	  however, that function simply sets the joint capabilities
	  structure, session->req_caps. During the media format rework, the
	  override_prefs was instead used to check if there were any
	  formats in session->req_caps. However, this usage isn't useful in
	  create_outgoing_sdp_stream. session->req_caps contains the
	  negotiated formats for *all* streams, not just the current one
	  being created. Thus, so long as any stream of any type has
	  provided a format, override_prefs will be non-zero. Hence, its
	  usage in checking whether or not we should look at the formats on
	  the endpoint or the joint capabilities is generally useless.
	  There's only two things useful to check: (1) Does the endpoint
	  have a format for the media type? (2) Did we negotiate a format
	  for the media type? If either of those is a 'no', then we must
	  kill the media stream.

2014-10-17 22:43 +0000 [r425905]  Jonathan Rose <jrose@digium.com>

	* configs/samples/cli_aliases.conf.sample: Sample Configurations:
	  make 'pjsip reload' reload all reloadable pjsip modules AST-1432
	  #close Reported by: John Bigelow

2014-10-17 13:35 +0000 [r425821-425879]  Matthew Jordan <mjordan@digium.com>

	* res/res_pjsip_sdp_rtp.c, res/res_pjsip.c,
	  res/res_pjsip_session.c, /: res_pjsip_session/res_pjsip_sdp_rtp:
	  Be more tolerant of offers When an inbound SDP offer is received,
	  Asterisk currently makes a few incorrection assumptions: (1) If
	  the offer contains more than a single audio/video stream,
	  Asterisk will reject the entire stream with a 488. This is an
	  overly strict response; generally, Asterisk should accept the
	  media streams that it can accept and decline the others. (2) If
	  the offer contains a declined media stream, Asterisk will attempt
	  to process it anyway. This can result in attempting to match
	  format capabilities on a declined media stream, leading to a 488.
	  Asterisk should simply ignore declined media streams. (3)
	  Asterisk will currently attempt to handle offers with AVPF with
	  use_avpf=No/AVP with use_avpf=Yes. This mismatch results in
	  invalid SDP answers being sent in response. If there is a
	  mismatch between the media type being offered and the
	  configuration, Asterisk must reject the offer with a 488. This
	  patch does the following: * Asterisk will accept SDP offers with
	  at least one media stream that it can use. Some WARNING messages
	  have been dropped to NOTICEs as a result. * Asterisk will not
	  accept an offer with a media type that doesn't match its
	  configuration. * Asterisk will ignore declined media streams
	  properly. #SIPit31 Review:
	  https://reviewboard.asterisk.org/r/4063/ ASTERISK-24122 #close
	  Reported by: James Van Vleet ASTERISK-24381 #close Reported by:
	  Matt Jordan ........ Merged revisions 425868 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c: channels/chan_sip: Respect outboundproxy
	  setting when sending qualify requests The outboundproxy setting
	  is currently ignored when sending OPTIONS requests as a result of
	  the qualify setting. This means that if an Asterisk server is
	  unable to send the packet directly to a peer, it is unable to
	  qualify any non-inbound registered peer (e.g. a peer SIP Trunk).
	  This patch grabs the outboundproxy information for a peer when a
	  qualify attempt is being constructed and, if it finds the
	  information, uses it when sending the OPTIONS request. Review:
	  https://reviewboard.asterisk.org/r/3948 ASTERISK-24063 #close
	  Reported by: Damian Ivereigh patches: outboundproxy-dai.patch
	  uploaded by Damian Ivereigh (License 6632) ........ Merged
	  revisions 425818 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 425819 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425820 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-17 02:41 +0000 [r425783]  Richard Mudgett <rmudgett@digium.com>

	* main/core_unreal.c, main/channel.c, /: AMI: Add missing VarSet
	  events when a channel inherits variables. There should be AMI
	  VarSet events when channel variables are inherited by an outgoing
	  channel. Also local;2 should generate VarSet events when it gets
	  all of its channel variables from channel local;1. ASTERISK-24415
	  #close Reported by: Richard Mudgett Patches:
	  jira_asterisk_24415_v12.patch (license #5621) patch uploaded by
	  Richard Mudgett Review: https://reviewboard.asterisk.org/r/4074/
	  ........ Merged revisions 425782 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-17 01:57 +0000 [r425736-425761]  Matthew Jordan <mjordan@digium.com>

	* /, bridges/bridge_native_rtp.c: bridge_native_rtp: Fix audio
	  issues when moving from remote bridge to softmix When a native
	  RTP bridge that is remotely bridging its participants switches to
	  a softmix bridge, it may not properly re-INVITE the media for one
	  or both participants back to Asterisk. This is due to the current
	  bridge_native_rtp code only re-INVITEs if it believes the channel
	  will survive the bridge operation. Currently, that code is
	  failing, as it expects the channels to have a soft hangup flag
	  set on it indicating that a redirect has occurred or that the
	  channel is going to leave the bridge. (The code did not take into
	  account a smart bridge operation). This patch also renames a few
	  things to be more reflective of the underlying types. Review:
	  https://reviewboard.asterisk.org/r/3997/ ASTERISK-24327 #close
	  ........ Merged revisions 425760 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, tests/test_cel.c: test_cel: Update pickup test to expect
	  CANCEL instead of ANSWSER The CEL pickup test previously looked
	  for a disposition of ANSWER between the original caller/peer when
	  the call is picked up. This is actually incorrect: the
	  disposition should, at the very least, not be ANSWER as the call
	  was never ANSWERed. The disposition is now CANCEL; this patch
	  updates the test accordingly. ........ Merged revisions 425757
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* main/cdr.c, /: main/cdr: Use 'time' when rescheduling batched
	  CDRs as opposed to 'size' When refactoring CDRs to use the
	  configuration framework, a 'whoops' was introduced where the CDR
	  batch size was used when rescheduling a batch, as opposed to the
	  time duration. This patch corrects that obvious mistake.
	  ASTERISK-24426 #close Reported by: Shane Blaser ........ Merged
	  revisions 425735 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-16 17:30 +0000 [r425714]  George Joseph <george.joseph@fairview5.com>

	* include/asterisk/config.h, tests/test_config.c, main/config.c, /:
	  config: Fix inf loop using ast_category_browse and
	  ast_variable_retrieve Fix infinite loop when calling
	  ast_variable_retrieve inside an ast_category_browse loop when
	  there is more than 1 category with the same name. Tested-by:
	  George Joseph Review: https://reviewboard.asterisk.org/r/4089/
	  ........ Merged revisions 425713 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-16 14:35 +0000 [r425691]  Kinsey Moore <kmoore@digium.com>

	* res/res_pjsip_t38.c, res/res_pjsip_registrar_expire.c,
	  res/res_pjsip_mwi_body_generator.c,
	  res/res_pjsip_endpoint_identifier_user.c,
	  res/res_pjsip_send_to_voicemail.c,
	  include/asterisk/res_pjsip_pubsub.h,
	  res/res_pjsip_outbound_authenticator_digest.c,
	  res/res_pjsip_outbound_registration.c,
	  res/res_pjsip_endpoint_identifier_anonymous.c,
	  res/res_pjsip_path.c, res/res_pjsip_one_touch_record_info.c,
	  res/res_pjsip_acl.c, res/res_pjsip_pubsub.c,
	  res/res_pjsip_diversion.c, res/res_pjsip_refer.c,
	  include/asterisk/res_pjsip.h,
	  res/res_pjsip_pidf_body_generator.c, res/res_pjsip_dtmf_info.c,
	  res/res_pjsip_multihomed.c, res/res_pjsip_authenticator_digest.c,
	  res/res_pjsip_sdp_rtp.c, res/res_hep_pjsip.c,
	  res/res_pjsip_messaging.c, res/res_pjsip_caller_id.c,
	  res/res_pjsip_logger.c, res/res_pjsip_nat.c,
	  res/res_pjsip_session.c, res/res_pjsip_exten_state.c,
	  res/res_pjsip_header_funcs.c, res/res_pjsip_rfc3326.c,
	  res/res_pjsip_phoneprov_provider.c, res/res_pjsip_mwi.c,
	  res/res_pjsip_dialog_info_body_generator.c,
	  res/res_pjsip_xpidf_body_generator.c, res/res_pjsip_registrar.c,
	  channels/chan_pjsip.c, res/res_pjsip_transport_websocket.c,
	  res/res_pjsip_pidf_eyebeam_body_supplement.c,
	  include/asterisk/res_pjsip_session.h, /, res/res_pjsip_notify.c,
	  res/res_pjsip_pidf_digium_body_supplement.c,
	  res/res_pjsip_endpoint_identifier_ip.c,
	  res/res_pjsip_publish_asterisk.c: PJSIP: Enforce module load
	  dependencies This enforces that res_pjsip, res_pjsip_session, and
	  res_pjsip_pubsub have loaded properly before attempting to load
	  any modules that depend on them since the module loader system is
	  not currently capable of resolving module dependencies on its
	  own. ASTERISK-24312 #close Reported by: Dafi Ni Review:
	  https://reviewboard.asterisk.org/r/4062/ ........ Merged
	  revisions 425690 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-16 06:11 +0000 [r425669]  Igor Goncharovskiy <igor.goncharovsky@gmail.com>

	* channels/chan_unistim.c, /: Fix loss of voice after second call
	  drops (on a second line) in case using multiple lines on unistim
	  phones. There is regression was introduced in r391379. Reported
	  by: Rustam Khankishyiev (closes issue ASTERISK-23846) ........
	  Merged revisions 425667 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425668 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-16 01:25 +0000 [r425646]  Joshua Colp <jcolp@digium.com>

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Fix a bug where ICE
	  state would get reset when it shouldn't. In the case where the
	  ICE negotiation had not yet started current state would get wiped
	  when it shouldn't. This also removes channel binding as in
	  practice this does not work well with other implementations.
	  ........ Merged revisions 425644 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425645 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-15 19:31 +0000 [r425627]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_motif.c: chan_motif: Cleanup
	  jingle_tech.capabilities only once.

2014-10-15 19:05 +0000 [r425611]  Jonathan Rose <jrose@digium.com>

	* res/parking/parking_tests.c: parking_tests: Fix assertions and
	  possibly crashes in res_parking unit tests Assertions were caused
	  by attempting to play music on hold to a channel with no formats.
	  Parking unit test channels were given formats and a technology so
	  that they would be able to pretend to read/write frames.
	  ASTERISK-24413 #close Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/4075/

2014-10-15 09:59 +0000 [r425590]  Alexandr Anikin <may@telecom-service.ru>

	* addons/chan_ooh323.c, /: chan_ooh323: fix rtptimeout general
	  value checking correct condition to check rtptimeout in [general]
	  config section ASTERISK-24393 #close Reported by: Dmitry Melekhov
	  Tested by: Dmitry Melekhov Patches: ASTERISK-24393.patch ........
	  Merged revisions 425547 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 425548 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425589 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-14 20:46 +0000 [r425526]  George Joseph <george.joseph@fairview5.com>

	* /, include/asterisk/config.h, tests/test_config.c, main/config.c:
	  config: Fix SEGV in unit test with MALLOC_DEBUG With MALLOC_DEBUG
	  the /main/config config_basic_ops test was causing a SEGV while
	  doing an ast_category_delete in an ast_category_browse loop.
	  Apparently this never worked but was also never tested. I removed
	  the test, added 2 notes to config.h indicating that it's not
	  supported and added a few lines of code to ast_category_delete to
	  prevent the SEGV should someone attempt it in the future.
	  Tested-by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/4078/ ........ Merged
	  revisions 425525 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-14 19:00 +0000 [r425504]  Jonathan Rose <jrose@digium.com>

	* main/sched.c, /: Scheduler: Fix a nasty scheduler caching bug
	  which makes new tasks not execute Tasks that were marked for
	  pending deletion in the scheduler would be moved to the cache for
	  later reuse, but after being recycled the deleted mark wouldn't
	  be removed resulting in fresh tasks being deleted without
	  reason... and immediately moved back into the cache where they
	  could be reused again. This could cause horrendous things to
	  happen in just about anything that used a scheduler.
	  ASTERISK-24321 #close Reported by: Steve Pitts Review:
	  https://reviewboard.asterisk.org/r/4071/ ........ Merged
	  revisions 425503 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-14 18:12 +0000 [r425481]  George Joseph <george.joseph@fairview5.com>

	* res/res_phoneprov.c, include/asterisk/phoneprov.h, /,
	  res/res_pjsip_phoneprov_provider.c: res_phoneprov: Create
	  accessor for ast_phoneprov_std_variable_lookup Based on feedback
	  from Richard, I created an accessor for
	  res_phoneprov/ast_phoneprov_std_variable_lookup and added load
	  priority to AST_MODULE_INFO. Tested-by: George Joseph Tested-by:
	  Richard Mudgett Review: https://reviewboard.asterisk.org/r/4076/
	  ........ Merged revisions 425480 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-14 16:46 +0000 [r425459]  Corey Farrell <git@cfware.com>

	* /, res/res_fax.c: res_fax: Fix reference leak caused by gateway
	  sessions Fax gateway session objects can be re-used, causing the
	  same gateway session to be added to faxregistry.container more
	  than once. This change causes fax_session_new to remove the
	  reserved session from the container before it's id is changed,
	  ensuring it's possible for the session to be freed.
	  ASTERISK-24392 #close Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/4049/ ........ Merged
	  revisions 425457 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425458 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-14 16:35 +0000 [r425455]  Richard Mudgett <rmudgett@digium.com>

	* /, main/stasis_channels.c: stasis_channels.c: Resolve unfinished
	  Dials when doing masquerades (Part 2) Masquerades into and out of
	  channels that are involved in a dial operation don't create the
	  expected dial end event. The missing dial end event goes against
	  the model for things like CDRs and generating Dial end manager
	  actions and such. There are four cases: 1) A channel masquerades
	  into the caller channel. The case happens when performing a
	  blonde transfer using the channel driver's protocol. 2) A channel
	  masquerades into a callee channel. The case happens when
	  performing a directed call pickup. 3) The caller channel
	  masquerades out of dial. The case happens when using the Bridge
	  application on the caller channel. 4) A callee channel
	  masquerades out of dial. The case happens when using the Bridge
	  application on a peer channel. As it turned out, all four cases
	  need to be handled instead of just the first one. ASTERISK-24237
	  Reported by: Richard Mudgett ASTERISK-24394 #close Reported by:
	  Richard Mudgett Review: https://reviewboard.asterisk.org/r/4066/
	  ........ Merged revisions 425430 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-14 16:19 +0000 [r425415]  Corey Farrell <git@cfware.com>

	* /, res/res_fax.c: res_fax: Resolve module reference leak caused
	  by reserved sessions Remove reference to module providing
	  reserved session after adding a reference to the final module.
	  This re-reference is done to ensure that module references are
	  correct even if the final session selects a different module than
	  the reserved session. ASTERISK-18923 #close Reported by: Grigoriy
	  Puzankin Review: https://reviewboard.asterisk.org/r/4048/
	  ........ Merged revisions 425405 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 425407 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425411 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-13 16:10 +0000 [r425384]  George Joseph <george.joseph@fairview5.com>

	* apps/app_directory.c, tests/test_sorcery.c, main/config.c,
	  tests/test_sorcery_realtime.c, res/res_sorcery_realtime.c,
	  apps/app_voicemail.c, res/res_sorcery_config.c, main/manager.c,
	  /, include/asterisk/config.h, pbx/pbx_realtime.c,
	  tests/test_config.c: manager/config: Support templates and
	  non-unique category names via AMI This patch provides the
	  capability to manipulate templates and categories with non-unique
	  names via AMI. Summary of changes: GetConfig and GetConfigJSON:
	  Added "Filter" parameter: A comma separated list of
	  name_regex=value_regex expressions which will cause only
	  categories whose variables match all expressions to be
	  considered. The special variable name TEMPLATES can be used to
	  control whether templates are included. Passing 'include' as the
	  value will include templates along with normal categories.
	  Passing 'restrict' as the value will restrict the operation to
	  ONLY templates. Not specifying a TEMPLATES expression results in
	  the current default behavior which is to not include templates.
	  UpdateConfig: NewCat now includes options for allowing duplicate
	  category names, indicating if the category should be created as a
	  template, and specifying templates the category should inherit
	  from. The rest of the actions now accept a filter string as
	  defined above. If there are non-unique category names, you can
	  now update specific ones based on variable values. To facilitate
	  the new capabilities in manager, corresponding changes had to be
	  made to config, most notably the addition of filter criteria to
	  many of the APIs. In some cases it was easy to change the
	  references to use the new prototype but others would have
	  required touching too many files for this patch so a wrapper with
	  the original prototype was created. Macros couldn't be used in
	  this case because it would break binary compatibility with
	  modules such as res_digium_phone that are linked to real symbols.
	  Tested-by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/4033/ ........ Merged
	  revisions 425383 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-12 21:09 +0000 [r425362]  Joshua Colp <jcolp@digium.com>

	* /, res/res_rtp_asterisk.c: res_rtp_asterisk: Make the ICE
	  transport check case insensitive as some implementations use
	  'udp'. ........ Merged revisions 425360 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425361 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-12 08:15 +0000 [r425289-425299]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, channels/chan_sip.c: chan_sip: Fix so asterisk won't send
	  reINVITE after a BYE. After a reINVITE glare situation, Asterisk
	  would re-send the reINVITE even though the call had been hung up
	  in the mean time. This patch unschedules the reinvite when
	  handling the BYE. ASTERISK-22791 #close Reported by: Paolo
	  Compagnini Tested by: Paolo Compagnini Review:
	  https://reviewboard.asterisk.org/r/4056/ (testcase is in review
	  r4055) ........ Merged revisions 425296 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 425297 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425298 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, Makefile: build: Relax badshell tilde test to allow for ~ in
	  middle of DESTDIR. The main Makefile has a target test called
	  'badshell' that tests if DESTDIR does not happen to have an
	  an-expanded tilde (~). This might be the case if you run: make
	  install DESTDIR=~/somewhere/ That test also disallowed valid
	  tildes in directory names. The test is now changed to only
	  trigger on a tilde at the start of the path. ASTERISK-13797
	  #close Reported by: Tzafrir Cohen Review:
	  https://reviewboard.asterisk.org/r/4064/ ........ Merged
	  revisions 425291 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 425292 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425293 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_calendar_ews.c: res_calendar_ews: Relax neon version
	  check to work with 0.30 too. Allow res_calendar_ews to work not
	  only with libneon-0.29 but also with 0.30. ASTERISK-24325 #close
	  Reported by: Tzafrir Cohen Review:
	  https://reviewboard.asterisk.org/r/4068/ ........ Merged
	  revisions 425286 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 425287 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425288 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-11 21:08 +0000 [r425265]  George Joseph <george.joseph@fairview5.com>

	* /, res/res_phoneprov.c: res_phoneprov: Cleanup module load error
	  handling Tested module load/reload interaction between
	  res_phoneprov and res_pjsip_phoneprov_provider in cases where
	  res_phoneprov didn't load correctly (usually misconfiguration or
	  missing phoneprov.conf) Tested-by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/4069/ ........ Merged
	  revisions 425264 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-10 20:48 +0000 [r425243]  Joshua Colp <jcolp@digium.com>

	* /, main/bridge.c, bridges/bridge_native_rtp.c: bridge: During a
	  smart bridge operation provide a more complete bridge to the old
	  technology. When a smart bridge operation occurs and a bridge
	  transitions from one technology to another the old technology is
	  provided the channels formerly in it and told that they are
	  leaving. Unfortunately the bridge provided along with them is
	  incomplete. The bridge, despite there being channels in it,
	  contains none. This forces technology implementations to have
	  additional logic when channels are leaving or to store their own
	  duplicated state. This change makes the bridge more complete so
	  it contains the expected channels. Now that the bridge is
	  complete special logic within bridge_native_rtp is no longer
	  needed and has been removed. Review:
	  https://reviewboard.asterisk.org/r/4057/ ........ Merged
	  revisions 425242 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-10 14:31 +0000 [r425221]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_phoneprov.c: res/res_phoneprov: Bail on registration
	  if res_phoneprov didn't load If res_phoneprov failed to fully
	  load (due to not being configured), the providers container will
	  be NULL. If a module attempts to register a phone provisioning
	  provider, it should check for the presence of the container. If
	  there is no providers container, it should return an error. This
	  patch makes the ast_phoneprov_provider_register function do
	  that... otherwise this would be a silly commit message. ........
	  Merged revisions 425220 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-10 14:23 +0000 [r425217]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip_phoneprov_provider.c:
	  res_pjsip_phoneprov_provider: Add missing dependency on
	  pjproject. ........ Merged revisions 425216 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-10 13:01 +0000 [r425155]  Kinsey Moore <kmoore@digium.com>

	* /, tests/test_callerid.c, main/callerid.c: CallerID: Fix parsing
	  regression This fixes a regression in callerid parsing introduced
	  when another bug was fixed. This bug occurred when the name was
	  composed entirely of DTMF keys and quoted without a number
	  section (<>). ASTERISK-24406 #close Reported by: Etienne Lessard
	  Tested by: Etienne Lessard Patches: callerid_fix.diff uploaded by
	  Kinsey Moore Review: https://reviewboard.asterisk.org/r/4067/
	  ........ Merged revisions 425152 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 425153 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425154 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-10 12:10 +0000 [r425132]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_nat.c, /: res_pjsip_nat: Place source port into
	  rport of responses if 'force_rport' is on. When the 'force_rport'
	  option is enabled the behavior should be the same as if the
	  remote side placed rport into the message themselves. Therefore
	  any responses we send should include the source port of the
	  request in the rport of the Via header. #SIPit31 ASTERISK-24387
	  #close Reported by: Matt Jordan ........ Merged revisions 425131
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-10 07:32 +0000 [r425071]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, channels/chan_sip.c: chan_sip: Fix dialog leak resulting from
	  missing ACK to re-INVITE. If a device re-INVITEs at the same time
	  as the dialog is hung up, and if then the ACK to the re-INVITE
	  never reaches Asterisk, chan_sip would fail to destroy the dialog
	  after a while. This resulted in (most prominently) file handle
	  leaks. (Patch reindented by me.) ASTERISK-20784 #close
	  ASTERISK-15879 #close Reported by: Torrey Searle, Nitesh Bansal
	  Patches: reinvite_ack_timeout.patch uploaded by Torrey Searle
	  (License #5334) patch_asterisk_20784.txt uploaded by Nitesh
	  Bansal (License #6418) Reviewboard:
	  https://reviewboard.asterisk.org/r/4052/ (testcase can be found
	  at r4051) ........ Merged revisions 425068 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 425069 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 425070 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-09 23:35 +0000 [r425052]  George Joseph <george.joseph@fairview5.com>

	* res/res_pjsip_phoneprov_provider.c: res_pjsip_phoneprov_provider:
	  fix compile breakage on AST_VECTOR endpoint->inbound_auths was
	  changed to a vector in 13 and I committed the 12 patch instead of
	  the 13 patch. Tested-by: George Joseph

2014-10-09 21:38 +0000 [r425031]  Kevin Harwell <kharwell@digium.com>

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Crash if no
	  candidates received for component When starting ice if there is
	  not at least one remote ice candidate with an RTP component
	  asterisk will crash. This is due to an assertion in pjnath as it
	  expects at least one candidate with an RTP component. Added a
	  check to make sure at least one candidate contains an RTP
	  component and at least one candidate has an RTCP component.
	  ASTERISK-24383 #close Review:
	  https://reviewboard.asterisk.org/r/4039/ ........ Merged
	  revisions 425030 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-09 20:54 +0000 [r425008]  George Joseph <george.joseph@fairview5.com>

	* /, res/res_pjsip_phoneprov_provider.c (added),
	  configs/samples/pjsip.conf.sample: res_pjsip_phoneprov_provider:
	  Provides pjsip integration with res_phoneprov This module allows
	  res_pjsip to integrate with res_phoneprov. It handles the pjsip
	  'phoneprov' object type. Tested-by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3976/ ........ Merged
	  revisions 425007 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-09 18:37 +0000 [r424986]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_phoneprov.c: res/res_phoneprov: Don't cancel Asterisk
	  load on module load failure ........ Merged revisions 424985 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-09 17:45 +0000 [r424964]  George Joseph <george.joseph@fairview5.com>

	* include/asterisk/phoneprov.h (added), /,
	  configs/samples/phoneprov.conf.sample,
	  include/asterisk/chanvars.h, res/res_phoneprov.c,
	  res/res_phoneprov.exports.in (added), main/chanvars.c:
	  res_phoneprov: Refactor phoneprov to allow pluggable config
	  providers This patch makes res_phoneprov more modular so other
	  modules (like pjsip) can provide configuration information
	  instead of res_phoneprov relying solely on users.conf and
	  sip.conf. To accomplish this a new ast_phoneprov public API is
	  now exposed which allows config providers to register themselves,
	  set defaults (server profile, etc) and add user extensions. *
	  ast_phoneprov_provider_register registers the provider and
	  provides callbacks for loading default settings and loading
	  users. * ast_phoneprov_provider_unregister clears the defaults
	  and users. * ast_phoneprov_add_extension should be called once
	  for each user/extension by the provider's load_users callback to
	  add them. * ast_phoneprov_delete_extension deletes one extension.
	  * ast_phoneprov_delete_extensions deletes all extensions for the
	  provider. Tested-by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3970/ ........ Merged
	  revisions 424963 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-09 16:36 +0000 [r424942]  Richard Mudgett <rmudgett@digium.com>

	* /, main/cdr.c: cdr.c: Make turning on CDR debug a one step
	  process instead of two. Now "cdr set debug on" doesn't also
	  require "core set verbose 1" to see CDR debug output. ........
	  Merged revisions 424941 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-09 08:08 +0000 [r424880]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, contrib/scripts/safe_asterisk: safe_asterisk: Don't
	  automatically exceed MAXFILES value of 2^20. On systems with lots
	  of RAM (e.g. 24GB) /proc/sys/fs/file-max divided by two can
	  exceed the per-process file limit of 2^20. This patch ensures the
	  value is capped. (Patch cleaned up by me.) ASTERISK-24011 #close
	  Reported by: Michael Myles Patches: safe_asterisk-ulimit.diff
	  uploaded by Michael Myles (License #6626) ........ Merged
	  revisions 424875 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 424878 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 424879 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-08 18:46 +0000 [r424854]  Joshua Colp <jcolp@digium.com>

	* /, res/res_rtp_asterisk.c: res_rtp_asterisk: Allow only UDP ICE
	  candidates. The underlying library, pjnath, that res_rtp_asterisk
	  uses for ICE support does not have support for ICE-TCP. As
	  candidates are passed through directly to it this can cause error
	  messages to occur when it receives something unexpected (such as
	  a TCP candidate). This change merely ignores all non-UDP
	  candidates so they never reach pjnath. ASTERISK-24326 #close
	  Reported by: Joshua Colp ........ Merged revisions 424852 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 424853 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-08 18:24 +0000 [r424769-424850]  Kinsey Moore <kmoore@digium.com>

	* main/stasis.c: Stasis: Relegate log message to dev-mode This
	  error message primarily applies to development tasks and will now
	  only show up when dev-mode is enabled via configure.

	* main/sounds_index.c: Indexer: Format message types may not exist
	  In Asterisk 13+, any given message type is not guaranteed to
	  exist even if Asterisk comes up correctly since creation of the
	  message type could be declined. The indexer should not prevent
	  Asterisk from starting under these conditions.

	* main/stasis.c: Stasis: Only log errors for non-declined types
	  When message type creation is declined via stasis.conf, certain
	  operations log errors assuming that the declined type is being
	  used before initialization or after destruction. These error
	  messages get quite spammy for oft used message types and should
	  not be logged in the first place since the message type is
	  validly NULL. Reported by: Matt DiMeo

2014-10-07 18:33 +0000 [r424752]  Joshua Colp <jcolp@digium.com>

	* main/data.c: data: Properly access formats in capabilities
	  structure when adding codecs. Formats within a capabilities
	  structure are addressed starting at 0, not 1. Assuming 1 causes
	  it to exceed an array. ASTERISK-24389 #close Reported by: Kevin
	  Harwell

2014-10-07 17:41 +0000 [r424692-424731]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_pjsip_outbound_registration.c:
	  res/res_pjsip_outbound_registration: Initialize
	  auth_reject_permanent parameter Prior to this patch, the
	  auth_reject_permanent parameter was not initialized on the
	  registration client state, leading to the parameter being
	  disabled regardless of the value specified in pjsip.conf. This
	  patch initialized the setting on the registration client state to
	  the provided configuration value. ASTERISK-24398 #close ........
	  Merged revisions 424730 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_pubsub.c: res/res_pjsip_pubsub: Fix typo in WARNING
	  message

	* main/message.c, /: message: Don't close an AMI connection on
	  SendMessage action error If SendMessage encounters an error (such
	  as incorrect input provided to the action), it will currently
	  return -1. Actions should only return -1 if the connection to the
	  AMI client should be closed. In this case, SendMessage causing
	  the client to disconnect is inappropriate. This patch causes the
	  action to return 0, which simply causes the action to fail.
	  Review: https://reviewboard.asterisk.org/r/4024 ASTERISK-24354
	  #close Reported by: Peter Katzmann patches: sendMessage.patch
	  uploaded by Peter Katzmann (License 5968) ........ Merged
	  revisions 424690 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 424691 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-06 15:38 +0000 [r424669]  Richard Mudgett <rmudgett@digium.com>

	* main/features.c, /: features.c: Fix lingering channel ref while
	  Bridge() application is active. Using the Bridge application to
	  bridge a channel that is executing an applicaiton such as Wait
	  results in a lingering Surrogate channel in the CLI "core show
	  channels" output even though it has already hungup. * Fix
	  bridge_exec() to not hold onto the current_dest_chan ref once it
	  has been put into the bridge. * Eliminated bridge_exec()'s use of
	  RAII_VAR(). ASTERISK-24224 #close Reported by: Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/4041/ ........ Merged
	  revisions 424668 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-06 12:38 +0000 [r424601-424647]  Matthew Jordan <mjordan@digium.com>

	* /, main/sdp_srtp.c: sdp_srtp: Add new lines to some WARNING
	  messages ........ Merged revisions 424646 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip/pjsip_options.c: res_pjsip/pjsip_options: Do not
	  404 an OPTIONS request not sent to an endpoint An OPTIONS request
	  that is sent to Asterisk but not to a specific endpoint is
	  currently sent a 404 in response. This is because, not
	  surprisingly, an empty extension is never going to be found in
	  the dialplan. This patch makes it so that we only attempt to look
	  up the endpoint in the dialplan if it is specified in the OPTIONS
	  request URI. #SIPit31 ASTERISK-24370 #close Reported by: Matt
	  Jordan ........ Merged revisions 424624 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/pjsip/dialplan_functions.c, /: pjsip/dialplan_functions:
	  Handle PJSIP_MEDIA_OFFER called on non-PJSIP channels Calling
	  PJSIP_MEDIA_OFFER on a non-PJSIP channel is hazardous to your
	  health. It will treat the channels as a PJSIP channel, eventually
	  hitting an ao2 error, FRACKing on assertion error, and quite
	  likely crashing. This patch adds checks to the read/write
	  callbacks that ensure that the channel technology is of type
	  'PJSIP' before attempting to operate on the channel. #SIPit31
	  ASTERISK-24382 #close Reported by: Matt Jordan ........ Merged
	  revisions 424621 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_hep_pjsip.c, res/res_pjsip/pjsip_distributor.c,
	  res/res_pjsip_logger.c: res_pjsip: Prevent crashes when PJPROJECT
	  presents an rdata with no message When a message that exceeds the
	  PJ_MAX_PKT_SIZE is sent over a reliable transport, it is possible
	  (although it shouldn't occur) for pjproject to pass up an rdata
	  object with a NULL msg in the msg_info. Needless to say, things
	  that attempt to dereference this are in for a rough ride. In
	  particular, this caused crashes in three different locations, all
	  of which are 'low level' enough to intercept an rdata object
	  early in processing: (1) res_pjsip_logger (2) res_hep_pjsip (3)
	  res_pjsip/distributor Anything that can intercept an rdata object
	  before res_pjsip/distributor should be defensive when looking at
	  the received packet. #SIPit31 ASTERISK-24369 #close Reported by:
	  Matt Jordan ........ Merged revisions 424618 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_pubsub.c: res/res_pjsip_pubsub: Gracefully handle
	  errors when re-creating subscriptions A subscription that has
	  been persisted can - for various reasons - fail to be re-created
	  on startup. This patch resolves a number of crashes that occurred
	  when a subscription cannot be re-created on several off-nominal
	  paths. #SIPit31 ASTERISK-24368 #close Reported by: Matt Jordan

2014-10-05 00:48 +0000 [r424552-424580]  Corey Farrell <git@cfware.com>

	* main/manager.c, /: Release AMI connections on shutdown.
	  ASTERISK-24378 #close Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/4037/ ........ Merged
	  revisions 424578 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 424579 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_motif.c: chan_motif: Correct last commit to use
	  ao2_cleanup to free format cap This fix applies to 13 and trunk.
	  ASTERISK-24384 #close Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/4043/

	* /, channels/chan_motif.c: chan_motif: Release format capabilities
	  and config on module load error ASTERISK-24384 #close Reported
	  by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/4043/ ........ Merged
	  revisions 424550 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 424551 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-03 21:56 +0000 [r424472-424529]  Richard Mudgett <rmudgett@digium.com>

	* /, CHANGES, res/res_pjsip.c: res_pjsip: Fix XML typo and update
	  CHANGES. ASTERISK-24199 ........ Merged revisions 424528 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/audiohook.c, apps/app_chanspy.c, apps/app_mixmonitor.c, /,
	  main/framehook.c: audiohooks: Reevaluate the bridge technology
	  when an audiohook is added or removed. Adding a mixmonitor to a
	  channel causes the bridge to change technologies from native to
	  simple_bridge so the call can be recorded. However, when the
	  mixmonitor is stopped the bridge does not switch back to the
	  native technology. * Added unbridge requests to reevaluate the
	  bridge when a channel audiohook is removed. * Moved the unbridge
	  request into ast_audiohook_attach() ensure that the bridge
	  reevaluates whenever an audiohook is attached. This simplified
	  the mixmonitor and chan_spy start code as well. * Added defensive
	  code to stop_mixmonitor_full() in case additional arguments are
	  ever added to the StopMixMonitor application. * Made
	  ast_framehook_detach() not do an unbridge request if the
	  framehook does not exist. * Made ast_framehook_list_fixup() do an
	  unbridge request if there are any framehooks. Also simplified the
	  loop. ASTERISK-24195 #close Reported by: Jonathan Rose Review:
	  https://reviewboard.asterisk.org/r/4046/ ........ Merged
	  revisions 424506 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/core_unreal.c, main/taskprocessor.c, channels/chan_iax2.c,
	  res/res_pjsip_session.c, main/channel.c, channels/chan_misdn.c,
	  channels/chan_skinny.c, funcs/func_frame_trace.c,
	  channels/chan_motif.c, include/asterisk/frame.h,
	  main/bridge_channel.c, channels/chan_pjsip.c,
	  channels/chan_unistim.c, include/asterisk/res_pjsip_session.h,
	  addons/chan_ooh323.c, /, include/asterisk/taskprocessor.h,
	  channels/chan_sip.c, res/res_pjsip_session.exports.in:
	  chan_pjsip: Fix deadlock when masquerading PJSIP channels.
	  Performing a directed call pickup resulted in a deadlock when
	  PJSIP channels were involved. A masquerade needs to hold onto the
	  channel locks while it swaps channel information between the two
	  channels involved in the masquerade. With PJSIP channels, the
	  fixup routine needed to push a fixup task onto the PJSIP
	  channel's serializer. Unfortunately, if the serializer was also
	  processing a task that needed to lock the channel, you get
	  deadlock. * Added a new control frame that is used to notify the
	  channels that a masquerade is about to start and when it has
	  completed. * Added the ability to query taskprocessors if the
	  current thread is the taskprocessor thread. * Added the ability
	  to suspend/unsuspend the PJSIP serializer thread so a masquerade
	  could fixup the PJSIP channel without using the serializer.
	  ASTERISK-24356 #close Reported by: rmudgett Review:
	  https://reviewboard.asterisk.org/r/4034/ ........ Merged
	  revisions 424471 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-03 15:54 +0000 [r424448]  George Joseph <george.joseph@fairview5.com>

	* /, main/sorcery.c: sorcery: Prevent SEGV in sorcery_wizard_create
	  when there's no create function When you call
	  ast_sorcery_create() you don't necessarily know which wizard is
	  going to be invoked. If it happens to be a wizard like 'config'
	  that doesn't have a 'create' virtual function you get a segfault
	  in the sorcery_wizard_create callback. This patch catches the
	  null function pointer, does an ast_assert, and logs an error.
	  Review: https://reviewboard.asterisk.org/r/4044/ ........ Merged
	  revisions 424447 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-03 13:58 +0000 [r424424-424427]  Kinsey Moore <kmoore@digium.com>

	* configs/samples/pjsip.conf.sample, /,
	  res/res_pjsip/pjsip_configuration.c: PJSIP: Restore functional
	  default for callerid_privacy The pjsip config option default
	  fixups from r424263 altered the functional default from
	  "allowed_not_screened" to "allowed". This change restores the
	  functional default value when none is provided. ........ Merged
	  revisions 424426 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/manager.c, /: Manager: Add missing fields and documentation
	  for CoreShowChannels This corrects some issues introduced in the
	  responses to the CoreShowChannels AMI command as well as adding
	  documentation for the responses. The command in Asterisk 12 was
	  missing the following fields: Duration, Application,
	  ApplicationData, and BridgedChannel and BridgedUniqueID (replaced
	  with BridgeId). ASTERISK-24262 #close Reported by: Mitch Claborn
	  Review: https://reviewboard.asterisk.org/r/4040/ ........ Merged
	  revisions 424423 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-03 07:54 +0000 [r424415]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_session.c, /: res_pjsip_session: Reduce SDP size by
	  removing duplicate connection lines. Due to the architecture of
	  how media streams are handled each individual handler adds
	  connection details (IP address) for it. The first media stream is
	  then used as the top level SDP connection line. In practice each
	  line ends up being the same so to reduce the SDP size
	  stream-level connection information is also added to the SDP if
	  it differs from the top level SDP connection line. ........
	  Merged revisions 424414 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-02 21:52 +0000 [r424394]  Richard Mudgett <rmudgett@digium.com>

	* /, configs/samples/pjsip.conf.sample, res/res_pjsip.c,
	  res/res_pjsip/config_transport.c: res_pjsip: Make transport
	  cipher option accept a comma separated list of cipher names.
	  Improvements to the res_pjsip transport cipher option. * Made the
	  cipher option accept a comma separated list of OpenSSL cipher
	  names. Users of realtime will be glad if they have more than one
	  name to list. * Added the CLI command 'pjsip list ciphers' so a
	  user can know what OpenSSL names are available for the cipher
	  option. * Updated the cipher option online XML documentation to
	  specify what is expected for the value. * Updated
	  pjsip.conf.sample to not indicate that ALL is acceptable since
	  ALL does not imply a preference order for the ciphers and PJSIP
	  does not simply pass the string to OpenSSL for interpretation.
	  ASTERISK-24199 #close Reported by: Joshua Colp Review:
	  https://reviewboard.asterisk.org/r/4018/ ........ Merged
	  revisions 424393 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-02 20:15 +0000 [r424373]  Jonathan Rose <jrose@digium.com>

	* /,
	  contrib/ast-db-manage/config/versions/10aedae86a32_add_outgoing_enum_va.py
	  (added): Alembic: Add enumerator value to sippeers -> directmedia
	  - 'outgoing' The 'outgoing' value was left off of the enumerator
	  when first creating the column. This patch adds it, and should
	  gracefully upgrade keeping the existing data in tact.
	  ASTERISK-23781 #close Reported by: Stephen More Review:
	  https://reviewboard.asterisk.org/r/4013/ ........ Merged
	  revisions 424372 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-02 13:35 +0000 [r424338]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, configs/samples/pjsip.conf.sample: res_pjsip: document use of
	  rewrite_contact in sample conf Without setting rewrite_contact,
	  an invite to an endpoint behind NAT will not reach it - unless
	  the endpoint itself uses STUN or TURN to discover it's public
	  URI. Thus, the use of this should be in the sample documentation.
	  Review: https://reviewboard.asterisk.org/r/4036/ ........ Merged
	  revisions 424337 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-01 22:52 +0000 [r424333]  Jonathan Rose <jrose@digium.com>

	* channels/chan_pjsip.c: chan_pjsip: Fix an assertion for channels
	  that lack formats on creation ASTERISK-24222 #close Reported by:
	  Mark Michelson Review: https://reviewboard.asterisk.org/r/4017/

2014-10-01 20:36 +0000 [r424313]  Corey Farrell <git@cfware.com>

	* res/res_hep.c, /: res_hep: Release allocation reference to
	  configuration. ASTERISK-24362 #close Reported by: Corey Farrell
	  Review: https://reviewboard.asterisk.org/r/4026/ ........ Merged
	  revisions 424312 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-01 16:37 +0000 [r424288-424291]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip/pjsip_configuration.c,
	  configs/samples/pjsip.conf.sample, res/res_pjsip.c: res_pjsip:
	  Add 'dtls_fingerprint' option to configure DTLS fingerprint hash.
	  During the latest update to DTLS-SRTP support the ability to
	  configure the hash used for fingerprints was added. This gave us
	  two supported ones: SHA-1 and SHA-256. The default was
	  accordingly updated to SHA-256. Unfortunately this configuration
	  ability was not exposed within res_pjsip. This change adds a
	  dtls_fingerprint option that controls it. #SIPit31 ........
	  Merged revisions 424290 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_sdp_rtp.c: res_pjsip_sdp_rtp: Accept DTLS
	  attributes in top level, not just media session. #SIPit31
	  ........ Merged revisions 424287 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-01 12:27 +0000 [r424245-424266]  Kinsey Moore <kmoore@digium.com>

	* res/res_pjsip/config_transport.c, /, res/res_pjsip/location.c,
	  res/res_pjsip_endpoint_identifier_ip.c,
	  res/res_pjsip/pjsip_configuration.c,
	  configs/samples/pjsip.conf.sample: PJSIP: Handle defaults
	  properly This updates the code behind PJSIP configuration options
	  with custom handlers to deal with the assigned default values
	  properly where it makes sense and adjusting the default value
	  where it doesn't. Before applying this patch, there were several
	  cases where the default value for an option would prevent that
	  config section from loading properly. Reported by: Thomas
	  Thompson Review: https://reviewboard.asterisk.org/r/4019/
	  ........ Merged revisions 424263 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_nat.c: PJSIP: Force transport on contact rewrite
	  If contact rewriting is enabled but the contact differs in
	  transport from what is actually being used, messages after the
	  initial INVITE transaction can be sent to an incorrect
	  transport/port combination. In the case where this bug occurred
	  the remote party never received a BYE since it was sent to the
	  remote party's TCP port over UDP. Review:
	  https://reviewboard.asterisk.org/r/4032/ ........ Merged
	  revisions 424244 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-10-01 10:09 +0000 [r424179-424184]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, channels/chan_sip.c: chan_sip: Simplify some unref code by
	  removing unlink_peer_from_tables. ASTERISK-22945 #related
	  Reported by: ibercom Patches:
	  asterisk11-chan_sip-simplifies.patch uploaded by ibercom (License
	  #6599) ........ Merged revisions 424181 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 424182 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 424183 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c: chan_sip: Remove excess ref of realtime
	  peer before sip_poke_peer. The peer is referenced at the end of
	  sip_poke_peer, it should not get an extra ref before the call to
	  sip_poke_peer. This fixes a memory leak. ASTERISK-22945 #close
	  Reported by: ibercom Tested by: Yuriy Gorlichenko Patches:
	  asterisk11.patch uploaded by ibercom (License #6599) Review:
	  https://reviewboard.asterisk.org/r/4031/ ........ Merged
	  revisions 424176 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 424177 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 424178 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-30 11:40 +0000 [r424153-424156]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_sdp_rtp.c, /: res_pjsip_sdp_rtp: Don't place an
	  extra whitespace before 'rport' and don't put IPv6 addresses in
	  brackets. #SIPit31 ........ Merged revisions 424155 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Ensure that the base
	  and mapped address for candidates is present in SDP. This change
	  fixes an issue where ICE candidates put into the SDP did not
	  contain the 'raddr' and 'rport' information for server reflexive
	  and relay candidates. #SIPit31 ........ Merged revisions 424151
	  from http://svn.asterisk.org/svn/asterisk/branches/11 ........
	  Merged revisions 424152 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-29 21:59 +0000 [r424129]  George Joseph <george.joseph@fairview5.com>

	* /, res/res_pjsip/pjsip_cli.c: pjsip_cli: Suppress header print on
	  error or no objects If there's an error on the pjsip command line
	  or there are no objects, don't print the column headers.
	  ASTERISK-24350 #close Reported-by: Brad Latus Tested-by: George
	  Joseph Tested-by: Brad Latus Review:
	  https://reviewboard.asterisk.org/r/4025/ ........ Merged
	  revisions 424128 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-29 21:26 +0000 [r424126]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, contrib/scripts/autosupport: autosupport: Fix bashism. '==' is
	  bashism (bashspecific, fails when dash is /bin/sh). Anyway, a
	  'case' works better there. Originally committed in r375059 and
	  r375060 on 2012-10-16 21:13:08. ASTERISK-20567 #close Reported
	  by: Tzafrir Cohen ........ Merged revisions 424117 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 424125 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-29 21:17 +0000 [r424097-424105]  Richard Mudgett <rmudgett@digium.com>

	* res/res_pjsip.c, res/res_pjsip_pubsub.c, res/res_pjsip_session.c,
	  /, res/res_pjsip_authenticator_digest.c: Simplify UUID generation
	  in several places. Replace code using ast_uuid_generate() with
	  simpler and faster code using ast_uuid_generate_str(). The new
	  code avoids a malloc(), free(), and copy. ........ Merged
	  revisions 424103 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/threadpool.c: threadpool.c: Minor cleanup fixes. * Fix
	  threadpool_alloc() prototype. * Add missing off-nominal NULL
	  check of pool in threadpool_alloc(). * searializer_create() does
	  not need to create the object with a lock as the lock is not
	  used. ........ Merged revisions 424096 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-27 12:43 +0000 [r424057]  Joshua Colp <jcolp@digium.com>

	* channels/chan_pjsip.c, res/res_pjsip_session.c, /:
	  res_pjsip_session: Add additional checks for delaying session
	  refreshes. There are certain situations which no checks existed
	  for which need to prevent session refreshes. This includes
	  sending a session refresh with SDP before SDP negotiation has
	  completed and sending a session refresh before the dialog itself
	  has been established. Checks for these have been added.
	  Additionally COLP related UPDATEs were including SDP when it is
	  not needed. Review: https://reviewboard.asterisk.org/r/4008/
	  ........ Merged revisions 424056 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-26 15:21 +0000 [r423992]  Richard Mudgett <rmudgett@digium.com>

	* /, res/res_fax.c: res_fax: Fix out of bounds error in
	  update_modem_bits(). ASTERISK-24357 #close Reported by: Jeremy
	  Laine Patches: res_fax_bounds.patch (license #6561) patch
	  uploaded by Jeremy Laine Modified patch to not use magic numbers.
	  ........ Merged revisions 423979 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 423983 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423987 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-26 08:25 +0000 [r423918]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, doc/asterisk.8: docs: Escape unescaped minus sign in
	  asterisk.8 manpage. ASTERISK-23768 #close Reported by: Jeremy
	  Lainé Patches: escape_manpage_hyphen.patch uploaded by Jeremy
	  Lainé (License #6561) ........ Merged revisions 423915 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 423916 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423917 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-25 21:01 +0000 [r423895]  Richard Mudgett <rmudgett@digium.com>

	* res/res_pjsip.c, /: res_pjsip.c: Add missing off nominal cleanup
	  in ast_sip_push_task_synchronous(). * Made memset the std struct
	  in ast_sip_push_task_synchronous() because if DEBUG_THREADS is
	  enabled then uninitialized lock tracking data is used. ........
	  Merged revisions 423894 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-24 18:32 +0000 [r423867]  Richard Mudgett <rmudgett@digium.com>

	* /, res/res_pjsip/pjsip_options.c, res/res_pjsip.c:
	  pjsip_options.c: Fix race condition stopping periodic out of
	  dialog OPTIONS request. The crash on the issues is a result of an
	  invalid transport configuration change when asterisk is
	  restarted. The attempt to send the qualify request fails and we
	  cleaned up. However, the callback is also called which results in
	  a double unref of the objects involved. * Put a wrapper around
	  pjsip_endpt_send_request() to detect when the passed in callback
	  is called because of an error so callers can know to not cleanup.
	  * Made send_request_cb() able to handle repeated challenges (Up
	  to 10). * Fix periodic endpoint qualify OPTIONS sched deletion
	  race by avoiding it. The sched entry will no longer self stop and
	  must be externally stopped. * Added REF_DEBUG description tags to
	  struct sched_data in pjsip_options.c. * Fix some off-nominal ref
	  leaks in schedule_qualify(), qualify_and_schedule(). * Reordered
	  pjsip_options.c module start/stop code to cleanup better on
	  error. ASTERISK-24295 #close Reported by: Rogger Padilla Review:
	  https://reviewboard.asterisk.org/r/3954/ ........ Merged
	  revisions 423866 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-24 08:53 +0000 [r423803]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, channels/chan_sip.c: chan_sip: Unref outbound proxy structure
	  on dialog/pvt destruction. Make sure outbound proxy refs are
	  always unreffed on dialog destruction. Review:
	  https://reviewboard.asterisk.org/r/4016/ ........ Merged
	  revisions 423800 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 423801 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423802 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-23 14:29 +0000 [r423783]  Mark Michelson <mmichelson@digium.com>

	* tests/test_cel.c, tests/test_cdr.c: Make CDR and CEL unit tests
	  less FRACKy. Prior to this commit, CDR and CEL tests were
	  expected to trigger FRACKs (i.e. assertions) due to the fact that
	  the channels they create have no formats on them. Some code was
	  independently added recently that attempts to prevent FRACKs from
	  occurring by failing early when attempting to set up translation
	  paths if one or both channels support no formats. Unfortunately,
	  this attempt to be helpful made the CDR and CEL tests go from
	  simply FRACKing to outright failing and in some cases, failing so
	  badly as to crash Asterisk. This commit seeks to correct past
	  mistakes by adding the ulaw format to channels created by the CDR
	  and CEL unit tests. This makes setting up translation paths
	  succeed, eliminates previously-seen FRACKs, and ultimately causes
	  the unit tests to succeed again. Review:
	  https://reviewboard.asterisk.org/r/4014

2014-09-22 19:48 +0000 [r423660-423723]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, channels/chan_sip.c: chan_sip: On INVITE retransmission, don't
	  add an extra 503 response. INVITE arrives to asterisk, asterisk
	  responds Busy(). If the INVITE is retransmitted, asterisk would
	  generate a 503 in addition to the 486. Thanks Torrey Searle for
	  providing a working regression test. ASTERISK-24335 #close
	  Review: https://reviewboard.asterisk.org/r/4003/ Patches:
	  retrans_486_invite.patch uploaded by Torrey Searle (License
	  #5334) ........ Merged revisions 423720 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 423721 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423722 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/editline/readline.c: cli.c: Fix tab completion "module
	  load" when MALLOC_DEBUG is enabled. r421600 conflicted with
	  r155763. ASTERISK-24348 #close ........ Merged revisions 423657
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 423658 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423659 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-21 01:15 +0000 [r423618-423641]  Matthew Jordan <mjordan@digium.com>

	* main/channel.c: main/channel: Unlock channel in off-nominal path
	  In r423414 (13) / r423415 (trunk), an API call that determines if
	  a format capability structure is empty was added. This returns
	  true if the format capability structure is completely empty or
	  "none". A check for this was added in channel.c's set_format
	  call. Unfortunately, when this check was true, it returned from
	  the function while still holding the channel lock. This caused
	  the CDR unit tests - which have a tendency to create channels
	  with no formats - to deadlock. Whoops. This patch unlocks the
	  channel on the off-nominal path.

	* rest-api/api-docs/events.json, /: rest-api/api-docs/events.json:
	  Remove non-compliant 'extends' attribute Prior to the release of
	  Swagger 1.2, the attribute 'extends' was being promoted as a
	  possible way to show that a particular object extends an existing
	  object. Instead, the Swagger specification went with the
	  'subTypes' attribute in the base object. This patch removes the
	  unsupported attribute; the object that the offending objects
	  proposed to extend already lists them in its 'subTypes'
	  attribute. ASTERISK-24300 #close Reported by: Bradley Watkins
	  ........ Merged revisions 423620 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* rest-api/api-docs/channels.json, rest-api/api-docs/sounds.json,
	  rest-api/api-docs/bridges.json,
	  rest-api/api-docs/recordings.json,
	  rest-api/api-docs/deviceStates.json,
	  rest-api/api-docs/endpoints.json,
	  rest-api/api-docs/mailboxes.json, rest-api/api-docs/events.json,
	  /, rest-api/api-docs/asterisk.json,
	  rest-api/api-docs/applications.json,
	  rest-api/api-docs/playbacks.json: rest-api/api-docs: Correct
	  basePath in resources to match top resources file The
	  resources.json file that defines the resource JSON files used
	  with ARI references a basePath of 'http://localhost:8088/ari'.
	  This does not match what is defined in the resource files
	  themselves, 'http://localhost:8088/stasis'. The correct base path
	  is the one that includes 'ari' in the URL; this patch updates the
	  various resource JSON files to have the correct basePath.
	  ASTERISK-24339 #close Reported by: Bradley Watkins ........
	  Merged revisions 423617 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-19 19:51 +0000 [r423580]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip_notify.c: res_pjsip_notify: Fix crash on
	  unload/load and don't say the module doesn't exist on reload.
	  When unloading the module did not unregister the CLI commands
	  causing a crash upon load when they were registered again. When
	  reloading the module the return value from the config options
	  framework was not checked to determine if an error occurred or
	  not. This caused a message to be output saying the module did not
	  exist when reloading if no changes were present. AST-1433 #close
	  AST-1434 #close ........ Merged revisions 423579 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-19 17:08 +0000 [r423561]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_pjsip.c, res/res_pjsip_sdp_rtp.c:
	  res_pjsip_sdp_rtp.c: Fix native formats containing formats that
	  were not negotiated. Outgoing PJSIP calls can result in
	  non-negotiated formats listed in the channel's native formats if
	  video formats are listed in the endpoint's configuration. The
	  resulting call could then use a non-negotiated format resulting
	  in one way audio. * Simplified the update of session->req_caps in
	  set_caps(). Why do something in five steps when only one is
	  needed? AFS-162 #close Review:
	  https://reviewboard.asterisk.org/r/4000/

2014-09-19 15:18 +0000 [r423524-423530]  Jonathan Rose <jrose@digium.com>

	* /, main/stasis_channels.c: Stasis_channels: Resolve unfinished
	  Dials when doing masquerades Masquerades into channels that are
	  in the dialing state don't end their dial and this goes against
	  the model for things like CDRs and generating Dial end manager
	  actions and such. ASTERISK-24237 #close Reported by: Richard
	  Mudgett Review: https://reviewboard.asterisk.org/r/3990/ ........
	  Merged revisions 423525 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_iax2.c: chan_iax2: Fix a crash when using chan_iax2
	  jitterbuffer settings Caused by format changes in Asterisk 13
	  ASTERISK-24265 #close Reported by: Dafi Ni Review:
	  https://reviewboard.asterisk.org/r/3999/

2014-09-19 12:45 +0000 [r423504]  Kinsey Moore <kmoore@digium.com>

	* include/asterisk/framehook.h, /, main/framehook.c,
	  res/res_pjsip_t38.c: PJSIP: Prevent T38 framehook being put on
	  wrong channel This change gives framehooks a reverse-direction
	  masquerade callback in addition to chan_fixup_cb similar to the
	  callback added to datastores to handle the same situation. The
	  new callback provides the same parameters as the fixup callback,
	  but is called on the new channel's framehooks before moving
	  framehooks from the old channel to the new channel. This gives
	  the framehooks an oppurtunity to decide whether they should
	  remain on the new channel or be removed. This new callback is
	  used to prevent the PJSIP T.38 framehook from remaining on a
	  masqueraded channel if the new channel is not also a PJSIP
	  channel. This was causing a crash when a local channel was
	  masqueraded into a PJSIP channel and the framehook was executed
	  on the local channel since the channel's tech private data was
	  not structured as expected. Review:
	  https://reviewboard.asterisk.org/r/4001/ ........ Merged
	  revisions 423503 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-18 19:30 +0000 [r423482]  Sean Bright <sean@malleable.com>

	* res/res_pjsip/config_auth.c, /: res_pjsip: Don't require a
	  password when doing userpass authentication. An empty password is
	  valid for username/password authentication so we should allow
	  password to be empty/not supplied. Review:
	  https://reviewboard.asterisk.org/r/3988 ........ Merged revisions
	  423481 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-18 19:22 +0000 [r423478]  George Joseph <george.joseph@fairview5.com>

	* tests/test_strings.c, /, main/utils.c,
	  include/asterisk/strings.h: utils: Create ast_strsep function
	  that ignores separators inside quotes This function acts like
	  strsep with three exceptions... * The separator is a single
	  character instead of a string. * Separators inside quotes are
	  treated literally instead of like separators. * You can elect to
	  have leading and trailing whitespace and quotes stripped from the
	  result and have '\' sequences unescaped. Like strsep, ast_strsep
	  maintains no internal state and you can call it recursively using
	  different separators on the same storage. Also like strsep, for
	  consistent results, consecutive separators are not collapsed so
	  you may get an empty string as a valid result. Tested by: George
	  Joseph Review: https://reviewboard.asterisk.org/r/3989/ ........
	  Merged revisions 423476 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-18 18:31 +0000 [r423462]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_pubsub.c: Add subscription state test events. These
	  are needed for a set of batched notification RLS tests that are
	  about to be committed to the testsuite. Review:
	  https://reviewboard.asterisk.org/r/3967

2014-09-18 17:11 +0000 [r423425]  Jonathan Rose <jrose@digium.com>

	* res/res_pjsip_endpoint_identifier_ip.c, /:
	  res_pjsip_endpoint_identifier_ip: Fix parsing of match value with
	  CIDR Also fixes comma separates match lists ASTERISK-24290 #close
	  Reported by: Ray Crumrine Review:
	  https://reviewboard.asterisk.org/r/3995/ ........ Merged
	  revisions 423417 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-18 17:09 +0000 [r423418-423423]  Richard Mudgett <rmudgett@digium.com>

	* bridges/bridge_softmix.c: bridge_softmix.c: Made use
	  ao2_replace() instead of the inline equivalent. * Clarified some
	  read/write format comments. * Fixed a doxygen tag typo.

	* main/astobj2.c, contrib/scripts/refcounter.py, /:
	  astobj2.c/refcounter.py: Fix to deal with invalid object refs. *
	  Make astob2 REF_DEBUG output an invalid object line when an
	  invalid ao2 object ref/unref is attempted. This is similar to the
	  constructor/destructor lines. * Fixed refcounter.py to handle
	  skewed objects that have constructor/destructor states. * Made
	  refcounter.py highlight the invalid ao2 object refs by putting
	  them in their own section of the processed output file. * Made
	  refcounter.py highlight unreffing an object by more than one that
	  results in a negative ref count and the object being destroyed.
	  The abnormally destroyed object is reported in the invalid and
	  finalized object sections of the output. Review:
	  https://reviewboard.asterisk.org/r/3971/ ........ Merged
	  revisions 423349 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 423400 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423416 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-18 16:37 +0000 [r423348-423414]  Mark Michelson <mmichelson@digium.com>

	* include/asterisk/format_cap.h, main/channel.c, main/format_cap.c,
	  main/translate.c: Add API call to determine if format capability
	  structure is "empty". Empty here means that there are no formats
	  in the format_cap structure or the only format in it is the
	  "none" format. I've added calls to check the emptiness of a
	  format_cap in a few places in order to short-circuit operations
	  that would otherwise be pointless as well as to prevent some
	  assertions from being triggered in cases where channels with no
	  formats are used.

	* /, res/res_fax_spandsp.c: res_fax_spandsp: Properly handle
	  cleanup before starting FAXes. If faxing fails at a very early
	  stage, then it is possible for us to pass a NULL t30 state
	  pointer to spandsp, which spandsp is none too pleased with. This
	  patch ensures that we pass the correct pointer to spandsp in the
	  situation where we have not yet set our local t30 state pointer.
	  ASTERISK-24301 #close Reported by Matt Jordan Patches:
	  ASTERISK-24301-fax.diff Uploaded by Mark Michelson (License
	  #5049) ........ Merged revisions 423360 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423365 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_mwi.c,
	  res/res_pjsip_dialog_info_body_generator.c,
	  res/res_pjsip_xpidf_body_generator.c,
	  res/res_pjsip_mwi_body_generator.c, res/res_pjsip_pubsub.c,
	  res/res_pjsip_exten_state.c, include/asterisk/res_pjsip_pubsub.h,
	  res/res_pjsip_pidf_body_generator.c: res_pjsip_pubsub: Add some
	  type safety when generating NOTIFY bodies. res_pjsip_pubsub has
	  two separate checks that it makes when a SUBSCRIBE arrives. * It
	  checks that there is a subscription handler for the Event * It
	  checks that there are body generators for the types in the Accept
	  header The problem is, there's nothing that ensures that these
	  two things will actually mesh with each other. For instance,
	  Asterisk will accept a subscription to MWI that accepts pidf+xml
	  bodies. That doesn't make sense. With this commit, we add some
	  type information to the mix. Subscription handlers state they
	  generate data of type X, and body generators state that they
	  consume data of type X. This way, Asterisk doesn't end up in some
	  hilariously mismatched situation like the one in the previous
	  paragraph. ASTERISK-24136 #close Reported by Mark Michelson
	  Review: https://reviewboard.asterisk.org/r/3877 Review:
	  https://reviewboard.asterisk.org/r/3878 ........ Merged revisions
	  423344 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-18 15:13 +0000 [r423284]  George Joseph <george.joseph@fairview5.com>

	* /, res/res_pjsip/location.c,
	  res/res_pjsip_endpoint_identifier_ip.c,
	  res/res_pjsip/pjsip_configuration.c,
	  res/res_pjsip/pjsip_options.c, res/res_pjsip/config_transport.c,
	  include/asterisk/res_pjsip.h, res/res_pjsip/config_auth.c:
	  res_pjsip: ami: Fix error in AMI output when an endpoint has no
	  transport When no transport is associated to an endpoint, the AMI
	  output for PJSIPShowEndpoint indicates an error instead of
	  silently ignoring the missing transport. This patch causes the
	  error to appear only if a transport was specified on the endpoint
	  and the transport doesn't exist. It also fixes an issue with
	  counting the objects that were actually found. ASTERISK-24161
	  #close ASTERISK-24331 #close Tested by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3998/ ........ Merged
	  revisions 423282 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-18 15:00 +0000 [r423281]  David M. Lee <dlee@digium.com>

	* makeopts.in, Makefile: Only install dahdi_span_config_hook if
	  DAHDI is enabled This patch changes the install to only install
	  the hook script if DAHDI is enabled. It also adds the script to
	  the uninstall task, and moves the DAHDI_UDEV_HOOK_DIR variable so
	  that it's not between the _MAKEOPTS variables and their comment.
	  This allows installs which specify a --prefix to work normally,
	  as long as they don't enable DAHDI. Review:
	  https://reviewboard.asterisk.org/r/3972/

2014-09-18 14:45 +0000 [r423279]  George Joseph <george.joseph@fairview5.com>

	* main/manager.c, /, include/asterisk/config.h, main/config.c:
	  config: bug: Fix SEGV in ast_category_insert when matching
	  category isn't found If you call ast_category_insert with a match
	  category that doesn't exist, the list traverse runs out of 'next'
	  categories and you get a SEGV. This patch adds check for the
	  end-of-list condition and changes the signature to return an int
	  for success/failure indication instead of a void. The only
	  consumer of this function is manager and it was also changed to
	  use the return value. Tested by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3993/ ........ Merged
	  revisions 423276 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 423277 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423278 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-17 18:05 +0000 [r423209-423255]  Joshua Colp <jcolp@digium.com>

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Ensure that the
	  thread terminating pj stuff is registered. ........ Merged
	  revisions 423253 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423254 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Fix 100% CPU usage
	  due to timer heap thread spinning. Side note: I need a vacation.
	  ........ Merged revisions 423210 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423211 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Fix building when
	  pjproject is not used. ........ Merged revisions 423207 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423208 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-16 16:32 +0000 [r423192]  Scott Griepentrog <sgriepentrog@digium.com>

	* apps/app_voicemail.c, include/asterisk/file.h, main/file.c:
	  Voicemail: get correct duration when copying file to vm Changes
	  made during format improvements resulted in the recording to
	  voicemail option 'm' of the MixMonitor app writing a zero length
	  duration in the msgXXXX.txt file. This change introduces a new
	  function ast_ratestream(), which provides the sample rate of the
	  format associated with the stream, and updates the app_voicemail
	  function for ast_app_copy_recording_to_vm to calculate the right
	  duration. Review: https://reviewboard.asterisk.org/r/3996/
	  ASTERISK-24328 #close

2014-09-16 12:12 +0000 [r423152-423173]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_session.c, /: res_pjsip_session: Fix usage of wrong
	  memory pool when creating local SDP. ........ Merged revisions
	  423172 from http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/rtp_engine.h, res/res_rtp_asterisk.c, /:
	  res_rtp_asterisk: Fix a myriad of TURN client issues. 1. The
	  number of file descriptors an ioqueue instance can handle is
	  fixed, so we now spawn the required number to handle the load. 2.
	  Our transport identifiers were exceeding the range supported by
	  pjnath. 3. The TURN client did not set up client binding causing
	  needless bandwidth usage. 4. The code no longer updates address
	  information on each packet. 5. STUN traffic was getting looped
	  back to Asterisk instead of going through the TURN server. 6.
	  Synchronization now ensures things are completely setup or
	  destroyed. 7. Logging now reflects the target the TURN server is
	  sending to/receiving from on our behalf. ASTERISK-23577 #close
	  Reported by: Jay Jideliov ASTERISK-23634 #close Reported by:
	  Roman Skvirsky Review: https://reviewboard.asterisk.org/r/3982/
	  ........ Merged revisions 423150 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423151 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-15 10:49 +0000 [r423069-423129]  Walter Doekes <walter+asterisk@wjd.nu>

	* /,
	  contrib/ast-db-manage/config/versions/5950038a6ead_fix_pjsip_verifiy_typo.py
	  (added): contrib: Fix verifyi typo in alembic DB script
	  ps_transport table. Reported by: Zogot (on IRC) Patches: tmp.diff
	  uploaded by Zogot, cleaned up by me. ........ Merged revisions
	  423128 from http://svn.asterisk.org/svn/asterisk/branches/12

	* configs/samples/sip.conf.sample, /: chan_sip: Clarify that
	  sipdebug=yes cannot be undone by the CLI. Document it in
	  sip.conf. ASTERISK-24249 #close Reported by: Avinash Mohod
	  Review: https://reviewboard.asterisk.org/r/3926/ ........ Merged
	  revisions 423066 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 423067 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 423068 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-12 16:09 +0000 [r422985]  Jonathan Rose <jrose@digium.com>

	* main/config.c, /: Realtime: Fix a bug that caused realtime
	  destroy command to crash Also has could affect with anything that
	  goes through ast_destroy_realtime. If a CLI user used the command
	  'realtime destroy <family>' with only a single column/value pair,
	  Asterisk would crash when trying to create a variable list from a
	  NULL value. ASTERISK-24231 #close Reported by: Niklas Larsson
	  Review: https://reviewboard.asterisk.org/r/3985/ ........ Merged
	  revisions 422984 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-11 22:16 +0000 [r422965]  Mark Michelson <mmichelson@digium.com>

	* /, main/app.c: Remove undocumented default behavior of
	  ast_play_and_record_full acceptdtmf. ast_play_and_record_full()
	  has a parameter called "acceptdtmf" that is a string of
	  acceptable DTMF digits that may be pressed by a caller to end and
	  accept the recording. ARI uses this function in order to perform
	  recording, and it provides options for what is passed as
	  acceptdtmf to ast_play_and_record_full(). By default, ARI passes
	  an empty string, with the intention that no DTMF can be used to
	  end the recording. The problem is that ast_play_and_record_full()
	  attempts to be "helpful" by setting "#" as the acceptdtmf if an
	  empty string or NULL pointer has been passed in. With ARI, this
	  results in unexpected behavior occurring if you have attempted to
	  intercept "#" yourself in order to perform some other
	  manipulation of the live recording. This change removes the
	  "helpful" behavior by no longer accepting "#" as a default
	  acceptdtmf if none is specified by the caller of
	  ast_play_and_record_full(). This makes the ARI scenario work as
	  expected. The other callers of ast_play_and_record_full() are
	  app_voicemail and app_minivm, and in both cases, they pass an
	  explicit "#" to ast_play_and_record_full() as acceptdtmf, so they
	  are unaffected by this change. ........ Merged revisions 422964
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-10 16:04 +0000 [r422905]  George Joseph <george.joseph@fairview5.com>

	* /, main/config.c: config: bug: fix truncation of included config
	  files on permissions error ast_config_text_file_save() currently
	  truncates include files as they are processed. If a subsequent
	  include file or the main config file has a permissions error that
	  prevents writing, earlier include files are left truncated
	  resulting in a frantic search for backups. This patch causes
	  ast_config_text_file_save to check for write access on all files
	  before it truncates any of them. Will be applied 1.8 > trunk.
	  Tested by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3986/ ........ Merged
	  revisions 422900 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 422903 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 422904 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-10 15:59 +0000 [r422901]  Sean Bright <sean@malleable.com>

	* res/res_pjsip/config_auth.c, /: pjsip/config_auth.c: Add missing
	  whitespace to log messages. The errors generated when validating
	  'auth' settings are missing a space which makes the messages a
	  little confusing. ........ Merged revisions 422899 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-09 20:01 +0000 [r422883]  Rusty Newton <rnewton@digium.com>

	* /, sounds/sounds.xml, sounds/Makefile: Sounds/BuildSystem:
	  Modifications to include new releases and Japanese language.
	  Modifying Makefile and sounds.xml to include new core 1.4.26 and
	  extra 1.4.15 sound prompt releases, plus the new Japanese core
	  sound prompts contributed by QLOOG. ASTERISK-23324 Reported by:
	  Kevin McCoy Tested by: Rusty Newton ........ Merged revisions
	  422789 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 422790 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 422791 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-08 18:03 +0000 [r422851-422855]  Mark Michelson <mmichelson@digium.com>

	* configs/samples/pjsip.conf.sample: Add note about configuring
	  list_items on a single line.

	* configs/samples/pjsip.conf.sample: Add sample configuration for
	  resource lists. On review /r/3977, it was recommended to note in
	  the sample configuration about the size limitation for resource
	  lists. However, since there was no section in the sample
	  configuration at all for resource list subscriptions, I decided
	  to make a separate commit where I have added the necessary sample
	  configuration as well as the size limitation warning.

	* res/res_pjsip_pubsub.c: Pre-allocate transmission data buffer for
	  RLS NOTIFY requests. PJSIP, unless a constant is modified at
	  compilation time, limits SIP requests to 4000 bytes. Full-state
	  RLS notifications can easily exceed this limit with moderately
	  small lists. This changeset allows for Asterisk to work around
	  this size limit by performing its own allocation of the
	  transmission data buffer. This way, Asterisk can allocate a
	  buffer that exceeds the built-in maximum. We still impose our own
	  limit of 64000 bytes, mainly because making allocations larger
	  than that is a bit absurd. ASTERISK-24181 #close Reported by Mark
	  Michelson Review: https://reviewboard.asterisk.org/r/3977

2014-09-08 15:41 +0000 [r422836]  Jonathan Rose <jrose@digium.com>

	* res/res_pjsip_pubsub.c: res_pjsip_pubsub: Check supported headers
	  for eventlist when subscribing to resource list
	  https://wiki.asterisk.org/wiki/display/AST/Resource+List+Subscription+Test+Plan
	  According to the off-nominal plan, if evenlist support is not
	  specified in a SUBSCRIBE's supported header(s), that subscription
	  should be rejected with an error. ASTERISK-23871 Reported by:
	  Mark Michelson Review:
	  https://reviewboard.asterisk.org/r/3960/diff/#index_header

2014-09-06 22:49 +0000 [r422767-422770]  Matthew Jordan <mjordan@digium.com>

	* /, main/cdr.c: main/cdr: Copy over location information during a
	  fork When a CDR is forked, a new CDR is created and appended to
	  the CDR chain for the Party A. The forked CDR starts life off as
	  a clone of the last non-finalized for the particular Party A. In
	  the past, merely copying over the snapshots for Party A/Party B
	  would be sufficient. However, as the CDRs now contain cached
	  information from Party A - specifically application/data,
	  context, and extension - we need to copy that over during a fork
	  as well. Huzzah for unit tests catching this when the
	  context/extension were derived from a cached value on the CDR
	  instead of on Party A. ........ Merged revisions 422769 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/rtp_engine.c, /: main/rtp_engine: Format NTP timestamps as
	  unsigned ints On some systems, a timeval's tv_sec/tv_usec will be
	  unsigned lont ints, as opposed to long ints. When the RTP engine
	  formats these as strings, it was previously formatting them as
	  signed integers, which can result in some odd negative timestamp
	  values (particularly on 32-bit systems). This patch formats the
	  values as unsigned long integers. ........ Merged revisions
	  422766 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-06 19:12 +0000 [r422747]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_sdp_rtp.c, /: res_pjsip_sdp_rtp: Fix retrieval of
	  "ice-pwd" attribute if in session and not media stream. ........
	  Merged revisions 422746 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-05 22:03 +0000 [r422716-422719]  Matthew Jordan <mjordan@digium.com>

	* main/cdr.c, /, apps/app_macro.c, include/asterisk/channel.h,
	  apps/app_stack.c: main/cdrs: Preserve context/extension when
	  executing a Macro or GoSub The context/extension in a CDR is
	  generally considered the destination of a call. When looking at a
	  2-party call CDR, users will typically be presented with the
	  following: context exten channel dest_channel app data default
	  1000 SIP/8675309 SIP/1000 Dial SIP/1000,,20 However, if the Dial
	  actually takes place in a Macro, the current behaviour in 12 will
	  result in the following CDR: context exten channel dest_channel
	  app data macro-dial s SIP/8675309 SIP/1000 Dial SIP/1000,,20 The
	  same is true of a GoSub: context exten channel dest_channel app
	  data subs dial_stuff SIP/8675309 SIP/1000 Dial SIP/1000,,20 This
	  generally makes the context/exten fields less than useful. It
	  isn't hard to preserve these values in the CDR state machine;
	  however, we need to have something that informs us when a channel
	  is executing a subroutine. Prior to this patch, there isn't
	  anything that does this. This patch solves this problem by adding
	  a new channel flag, AST_FLAG_SUBROUTINE_EXEC. This flag is set on
	  a channel when it executes a Macro or a GoSub. The CDR engine
	  looks for this value when updating a Party A snapshot; if the
	  flag is present, we don't override the context/exten on the main
	  CDR object. In a funny quirk, executing a hangup handler must
	  *not* abide by this logic, as the endbeforehexten logic assumes
	  that the user wants to see data that occurs in hangup logic,
	  which includes those subroutines. Since those execute outside of
	  a typical Dial operation (and will typically have their own
	  dedicated CDR anyway), this is unlikely to cause any heartburn.
	  Review: https://reviewboard.asterisk.org/r/3962/ ASTERISK-24254
	  #close Reported by: tm1000, Tony Lewis Tested by: Tony Lewis
	  ........ Merged revisions 422718 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/cdr.c, /: main/cdr: Fix crash/memory consumption in CDRs in
	  multi-party bridge scenarios This patch fixes an issue where CDRs
	  would get stuck generating an infinite number of CDRs, eventually
	  crashing Asterisk (and consuming a lot of memory along the way).
	  When a channel enters into a multi-party bridge, the CDR engine
	  creates mappings of each participant to each other participant,
	  picking the 'A' party as it goes. So, if we have four channels in
	  a multi-party bridge (Alice, Bob, Charlie, Denise), we would have
	  something like: Alice => Bob Alice => Charlie Alice => Denise Bob
	  => Charlie Bob => Denise Charlie => Denise This works fine when
	  participants enter the bridge a single time. When a participant
	  leaves a bridge, the CDRs for that channel are transitioned to a
	  finalized state. The bug occurs if Bob rejoins. When the CDR
	  engine creates mappings between the channels, it walks through
	  all the participants currently in the bridge, and realizes that
	  no one in the bridge can create a CDR with the channel (Bob). As
	  such it creates a new CDR for the candidate and appends it to
	  that candidate's chain. Unfortunately, on this particular code
	  path, it doesn't stop traversing the candidate's chain. Since we
	  just added ourselves to the chain, this causes the loop to keep
	  going, constantly adding new CDRs. This patch makes it so the
	  engine bails when it creates a CDR match in this case. Review:
	  https://reviewboard.asterisk.org/r/3964/ ASTERISK-24241 #close
	  Reported by: Deepak Singh Rawat Tested by: Deepak Singh Rawat
	  ASTERISK-24208 Reported by: Frankie Chin ........ Merged
	  revisions 422715 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-05 20:35 +0000 [r422700]  Richard Mudgett <rmudgett@digium.com>

	* funcs/func_channel.c: func_channel.c: Add missing locking to some
	  CHANNEL() requests. * The CHANNEL() audionativeformat,
	  videonativeformat, audioreadformat, and audiowriteformat now need
	  locking since the media format rework when accessing the
	  channel's format pointers. * Increased the buffer size for
	  CHANNEL() audionativeformat and videonativeformat output strings
	  since the allow=all can be a lengthy list. * Tweaked the
	  CHANNEL() XML documentation for secure_bridge_signaling,
	  secure_bridge_media, and state. * Ensured the output buffer is
	  initialized for secure_bridge_signaling and secure_bridge_media.
	  * Made use the locked_copy_string() macro instead of inlining it
	  for trace and checkhangup.

2014-09-05 20:11 +0000 [r422665-422684]  Jonathan Rose <jrose@digium.com>

	* main/dial.c, include/asterisk/dial.h: Dial API: Add a dial option
	  to indicate the dialed channel will replace dialer Adds an option
	  to the dial API that marks an outgoing dial as replacing the
	  dialing channel for the purpose of propagating accountcode. When
	  it is used, AST_CHANNEL_REQUESTOR_REPLACEMENT is used instead of
	  AST_CHANNEL_REQUESTOR_BRIDGE_PEER when setting accountcodes on
	  the involved channels with ast_channel_req_accountcodes. Review:
	  https://reviewboard.asterisk.org/r/3968/

	* main/cli.c, /: Call IDs: Fix appearance of call ID in core show
	  channels when NULL NULL call IDs were meant to appear as '(none)'
	  but instead were showing the contents of an uninitialized
	  character buffer. ASTERISK-24223 Review:
	  https://reviewboard.asterisk.org/r/3979/ ........ Merged
	  revisions 422664 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-05 17:36 +0000 [r422661]  Richard Mudgett <rmudgett@digium.com>

	* main/devicestate.c, channels/chan_iax2.c: devicestate.c: Minor
	  tweaks * In ast_state_chan2dev() use ARRAY_LEN() instead of a
	  sentinel value in chan2dev[]. * Fix some comments in chan_iax2.c.

2014-09-05 13:28 +0000 [r422646]  Kinsey Moore <kmoore@digium.com>

	* menuselect/menuselect.c: Menuselect: Fix incorrect enabling on
	  failed deps This corrects a situation where menuselect can
	  incorrectly enable a module by default that has defaultenabled
	  set to "no" and has failed/non-selected dependencies. The bug is
	  due to an inverted test when checking for whether the given
	  module should be set to enabled by default on load. Review:
	  https://reviewboard.asterisk.org/r/3975/ Reported by: John
	  Bigelow

2014-09-04 21:23 +0000 [r422631]  Jonathan Rose <jrose@digium.com>

	* main/manager.c, /: Manager: Require read permission for SYSTEM in
	  order to send FullyBooted Review:
	  https://reviewboard.asterisk.org/r/3969/ ........ Merged
	  revisions 422584 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 422625 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 422626 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-03 14:05 +0000 [r422558]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_transport_websocket.c, /:
	  res_pjsip_transport_websocket: Fix crash when the Contact header
	  is not a URI. The code for changing the Contact header wrongly
	  assumed that the Contact would always contain a URI. This is
	  incorrect. ASTERISK-24271 Reported by: Dafi Ni ........ Merged
	  revisions 422557 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-02 20:29 +0000 [r422542]  Mark Michelson <mmichelson@digium.com>

	* /, channels/chan_pjsip.c, res/res_pjsip_diversion.c,
	  res/res_pjsip_session.c, include/asterisk/res_pjsip_session.h:
	  Resolve race condition where channels enter dialplan application
	  before media has been negotiated. Testsuite tests will
	  occasionally fail because on reception of a 200 OK SIP response,
	  an AST_CONTROL_ANSWER frame is queued prior to when media has
	  finished being negotiated. This is because session supplements
	  are called into before PJSIP's inv_session code has told us that
	  media has been updated. Sometimes the queued answer frame is
	  handled by the PBX thread before the ensuing media negotiations
	  occur, causing a test failure. As it turns out, there is another
	  place that session supplements could be called into, which is
	  after media has finished getting negotiated. What this commit
	  introduces is a means for session supplements to indicate when
	  they wish to be called into when handling an incoming SIP
	  response. By default, all session supplements will be run at the
	  same point that they were prior to this commit. However, session
	  supplements may indicate that they wish to be handled earlier
	  than normal on redirects, or they may indicate they wish to be
	  handled after media has been negotiated. In this changeset, two
	  session supplements have been updated to indicate a preference
	  for when they should be run: res_pjsip_diversion executes before
	  handling redirection in order to get information from the
	  Diversion header, and chan_pjsip now handles responses to INVITEs
	  after media negotiation to fix the race condition mentioned
	  previously. ASTERISK-24212 #close Reported by Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3930 ........ Merged revisions
	  422536 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-09-01 14:16 +0000 [r422504-422507]  Matthew Jordan <mjordan@digium.com>

	* main/cli.c, /: main/cli: Do not attempt to show CDR data for
	  internal channels Internal channels don't have CDRs. Querying the
	  CDR engine for their variables will make it cranky. ........
	  Merged revisions 422506 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis.c, /, res/stasis/stasis_bridge.c: res_stasis:
	  Don't play MoH to channels by default when added to holding
	  bridges When ARI manipulates a bridge, it generally doesn't care
	  what the mixing technology is. Operations on a bridge initiated
	  through ARI should perform their action in generally the same
	  way, regardless of the bridge's mixing technology. While the
	  mixing technology may determine how media flows to channels, the
	  actual operations on a bridge themselves should be the same.
	  Currently, this isn't the case with holding bridges. When a
	  channel joins without a role, MoH is started on that channel
	  automatically. Subsequent bridge operations that would stop MoH
	  would fail (as there is no Announcer channel playing MoH to the
	  bridge). Starting MoH on the bridge will also create two MoH
	  streams: one from the MoH being played on the participant
	  channel, and one from the announcer channel. From the perspective
	  of ARI users, this is counter-intuitive - I would not expect MoH
	  to be started for me. The mixing technology determines how media
	  is shared between participants, not the application experience.
	  This patch does the following: * The Stasis bridge class now
	  inspects channels as they are going into a bridge. If the bridge
	  has a holding capability, and the channel has no roles, we give
	  it a participant role and mark the default behaviour to have no
	  entertainment. This allows addChannel operations to continue to
	  set a participant role with an entertainment option if it felt
	  like it (or could do it). * The music on hold channel is now
	  Stasis approved (tm) Review:
	  https://reviewboard.asterisk.org/r/3929/ ASTERISK-24264 #close
	  Reported by: Samuel Galarneau Tested by: Samuel Galarneau
	  ........ Merged revisions 422503 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-30 17:32 +0000 [r422442-422445]  George Joseph <george.joseph@fairview5.com>

	* apps/app_confbridge.c, /: confbridge: Add Duration to
	  ConfbridgeList event The ConfbridgeList event doesn't include how
	  long the user has been a member of the conference. This patch
	  adds Duration (seconds) which is based on user->chan->answertime.
	  Tested by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3955/ ........ Merged
	  revisions 422444 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/manager.c, /: manager: Make WaitEvent action respect
	  eventfilters A WaitEvent issued via an http session isn't
	  respecting eventfilters defined for the user. I just added a
	  match_filter to the predicate that controls astman_append. Tested
	  by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3958/ ........ Merged
	  revisions 422439 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 422440 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 422441 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-29 19:40 +0000 [r422374-422379]  Matthew Jordan <mjordan@digium.com>

	* doc/smsq.8 (added), /: doc: Add a manpage for the smsq utility
	  This patch adds a manpage for the smsq utility. Note that this is
	  one of the patches the Debian distro applies for the Asterisk
	  project, as per ASTERISK-24191. Review:
	  https://reviewboard.asterisk.org/r/3895/ ASTERISK-24171 #close
	  Reported by: Jeremy Laine patches: smsq.8 uploaded by Jeremy
	  Laine (License 6561) ........ Merged revisions 422376 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 422377 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 422378 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* doc/aelparse.8 (added), /: doc: Add a manpage for the aelparse
	  utility This patch adds a manpage for the aelparse utility. Note
	  that this is one of the patches the Debian distro applies for the
	  Asterisk project, as per ASTERISK-24191. Review:
	  https://reviewboard.asterisk.org/r/3896/ ASTERISK-24171 #close
	  Reported by: Jeremy Laine patches: aelparse.8 uploaded by Jeremy
	  Laine (License 6561) ........ Merged revisions 422371 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 422372 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 422373 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-29 19:05 +0000 [r422359]  Scott Griepentrog <sgriepentrog@digium.com>

	* channels/chan_sip.c: The assertion that peer was not found on
	  final event message was being triggered on configuration reload.
	  This patch changes that case to just return instead. Review:
	  https://reviewboard.asterisk.org/r/3953/ Commited in trunk
	  revision 422358

2014-08-28 21:54 +0000 [r422296]  Matthew Jordan <mjordan@digium.com>

	* LICENSE, /: LICENSE: Clarify language in Asterisk's LICENSE to
	  allow for linking to UniMRCP The UniMRCP project distributes
	  Asterisk modules that integrate Asterisk with UniMRCP, and other
	  Asterisk users use the UniMRCP library as well. Unfortunately,
	  the UniMRCP license is Apache 2.0, which per the Free Software
	  Foundation, is not a compatible license with the GPLv2. "Please
	  note that this license is not compatible with GPL version 2,
	  because it has some requirements that are not in that GPL
	  version. These include certain patent termination and
	  indemnification provisions. The patent termination provision is a
	  good thing, which is why we recommend the Apache 2.0 license for
	  substantial programs over other lax permissive licenses." On the
	  other hand, UniMRCP is a great project and we'd like to let
	  people use it with Asterisk. This patch updates the LICENSE text
	  to allow users to link Asterisk with UniMRCP and distribute the
	  resulting binaries. ........ Merged revisions 422293 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 422294 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 422295 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-28 20:30 +0000 [r422276]  Michael L. Young <elgueromexicano@gmail.com>

	* /, channels/chan_iax2.c: chan_iax2: Fix Dynamic IAX2
	  Registrations After Temporary DNS Failure The reporter on the
	  issue found some issues when upgrading from version 10 to 11 on
	  55 hosts. Two situations that can occur with dynamic
	  registrations. 1. With dnsmgr disabled, if the host is not
	  resolvable we are not trying to resolve the host again when it is
	  time to attempt to register again. This results in never
	  registering to the host. 2. With dnsmgr enabled, when the host is
	  temporarily not resolvable the address is set to 0.0.0.0:0 and
	  then when the host is resolvable the port is not being restored
	  and stays set to 0. This patch resolves these two issues by: *
	  Storing the hostname so that it can be used for resolving with
	  DNS. * Resolve the hostname on the next scheduled attempt to
	  register. * Storing the port used to reach the host so that when
	  the hostname is resolvable again, we can set the port again if
	  the port is still unset after looking up the host. ASTERISK-23767
	  #close Reported by: David Herselman Tested by: David Herselman,
	  Michael L. Young Patches:
	  asterisk-23767-dns_reg_retry_and_set_port_11_v3.diff uploaded by
	  Michael L. Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/3856/ ........ Merged
	  revisions 422274 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 422275 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-28 17:25 +0000 [r422256]  Richard Mudgett <rmudgett@digium.com>

	* /, UPGRADE.txt: Added ConfBridge AMI event note to UPGRADE.txt.
	  ........ Merged revisions 422255 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-28 15:49 +0000 [r422239]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_pubsub.c: Fix bug that did not allow for multiple
	  batched RLS notifications to be sent. A misunderstanding of how
	  the scheduler worked caused further batched notifications beyond
	  the first not to get scheduled. Now we reset our scheduler ID to
	  -1 after the batched notification is sent. This way, further
	  notifications can be scheduled when they arise.

2014-08-28 00:36 +0000 [r422200-422215]  Richard Mudgett <rmudgett@digium.com>

	* res/res_pjsip/pjsip_options.c, /: res/res_pjsip/pjsip_options.c:
	  Eliminate excessive RAII_VAR usage. * Fix off nominal ref leak in
	  find_or_create_contact_status(). * Add missing NULL check of
	  status in update_contact_status() and init_start_time(). ........
	  Merged revisions 422214 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/sched.c, include/asterisk/sched.h: sched: Fix typo and
	  whitespace change.

2014-08-27 17:29 +0000 [r422177]  George Joseph <george.joseph@fairview5.com>

	* /, apps/confbridge/confbridge_manager.c, apps/app_confbridge.c:
	  confbridge: Add 'Admin' param to join, leave, mute, unmute and
	  talking events Currently there's no way to tell if a user is an
	  admin or not when receiving the join, leave, mute, unmute and
	  talking events. This patch adds that capability. Tested by:
	  George Joseph Review: https://reviewboard.asterisk.org/r/3950/
	  ........ Merged revisions 422176 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-27 15:31 +0000 [r422154]  Kinsey Moore <kmoore@digium.com>

	* include/asterisk/utils.h, /, channels/chan_sip.c,
	  tests/test_callerid.c (added), tests/test_utils.c,
	  main/callerid.c, main/utils.c, res/res_pjsip_caller_id.c:
	  CallerID: Fix parsing of malformed callerid This allows the
	  callerid parsing function to handle malformed input strings and
	  strings containing escaped and unescaped double quotes. This also
	  adds a unittest to cover many of the cases where the parsing
	  algorithm previously failed. Review:
	  https://reviewboard.asterisk.org/r/3923/ Review:
	  https://reviewboard.asterisk.org/r/3933/ ........ Merged
	  revisions 422112 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 422113 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 422114 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-26 23:28 +0000 [r422091]  George Joseph <george.joseph@fairview5.com>

	* apps/app_confbridge.c, /: confbridge: Make kick, mute and unmute
	  handle channel targets consistently. Kick, mute and unmute were a
	  little inconsistent in their handling of channel targets. This
	  patch cleans that up by insuring they all handle the 'all' target
	  consistently and adds the 'participants' target which acts on
	  non-admins. Documentation for kick was also cleaned up as it
	  never supported partial channel names. Tested by: George Joseph
	  Review: https://reviewboard.asterisk.org/r/3944/ ........ Merged
	  revisions 422090 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-26 22:13 +0000 [r422071]  Mark Michelson <mmichelson@digium.com>

	* main/sched.c, /: Fix race condition in the scheduler when
	  deleting a running entry. When scheduled tasks run, they are
	  removed from the heap (or hashtab). When a scheduled task is
	  deleted, if the task can't be found in the heap (or hashtab), an
	  assertion is triggered. If DO_CRASH is enabled, this assertion
	  causes a crash. The problem is, sometimes it just so happens that
	  someone attempts to delete a scheduled task at the time that it
	  is running, leading to a crash. This change corrects the issue by
	  tracking which task is currently running. If that task is
	  attempted to be deleted, then we mark the task, and then wait for
	  the task to complete. This way, we can be sure to coordinate task
	  deletion and memory freeing. ASTERISK-24212 Reported by Matt
	  Jordan Review: https://reviewboard.asterisk.org/r/3927 ........
	  Merged revisions 422070 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-25 16:44 +0000 [r421979-422037]  Richard Mudgett <rmudgett@digium.com>

	* res/res_musiconhold.c: res_musiconhold.c: Release any format refs
	  before memset(). * Clear the channel music_state pointer before
	  destroying the music_state object for safety.

	* res/res_musiconhold.c, /: res_musiconhold: Fix MOH restarting
	  where it left off from the last hold. Restore code removed by
	  https://reviewboard.asterisk.org/r/3536/ that introduced a
	  regression that prevents MOH from restarting were it left off the
	  last time. ASTERISK-24019 #close Reported by: Jason Richards
	  Patches: jira_asterisk_24019_v1.8.patch (license #5621) patch
	  uploaded by rmudgett Review:
	  https://reviewboard.asterisk.org/r/3928/ ........ Merged
	  revisions 421976 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 421977 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421978 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-24 19:36 +0000 [r421911-421956]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_transport_websocket.c, /:
	  res_pjsip_transport_websocket: Attach the Websocket module on
	  outgoing INVITEs. In order to alter the Contact header on
	  in-dialog requests and responses the Websocket module must be
	  attached on outgoing INVITEs. The Contact header is modified so
	  that the PJSIP transport layer can find and use the existing
	  Websocket connection based on the source IP address, port, and
	  transport. ASTERISK-24143 #close Reported by: Aleksei Kulakov
	  ........ Merged revisions 421955 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_transport_websocket.c:
	  res_pjsip_transport_websocket: Fix a progressive memory growth.
	  The packet structure used to receive messages was using the
	  transport pool. This meant that for each parsing the pool would
	  grow accordingly. Since memory can not be reclaimed without
	  resetting it this would cause the memory pool to grow and grow.
	  This change uses a specific memory pool for the packet structure
	  and resets it to a fresh state after the message has been
	  received and handled. ........ Merged revisions 421939 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_transport_websocket.c:
	  res_pjsip_transport_websocket: Ensure secure Websocket clients
	  can be called. This change enforces the transport in the Contact
	  header for Websocket clients. Previously a client may provide a
	  transport of 'ws' when it is actually using a transport of 'wss'.
	  This would cause outgoing calls to fail as the existing
	  connection could not be found. ........ Merged revisions 421931
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c: chan_sip: Use the server reflexive ICE
	  candidate RTCP port as provided. This code originally worked
	  around an issue within res_rtp_asterisk itself. The wrong socket
	  was being used for the STUN check for RTCP, causing the port to
	  be the same as RTP. This was subsequently fixed and the RTCP port
	  provided for the ICE candidate is correct and does not need to be
	  incremented. ASTERISK-23997 #close Reported by: Badalian
	  Vyacheslav Patches: plus1.diff submitted by Badalian Vyacheslav
	  (license 5249) ........ Merged revisions 421909 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421910 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-22 16:56 +0000 [r421882]  Mark Michelson <mmichelson@digium.com>

	* apps/app_mixmonitor.c: Fix a locking inversion in MixMonitor. We
	  need to unlock the audiohook before trying to lock the channel,
	  since the correct locking order is channel then audiohook.

2014-08-22 16:44 +0000 [r421880]  Jonathan Rose <jrose@digium.com>

	* res/res_stasis_answer.c, res/res_stasis.c, res/stasis/command.c,
	  res/res_stasis_playback.c, /, res/stasis/control.c,
	  res/stasis/stasis_bridge.c, res/stasis/command.h,
	  include/asterisk/stasis_app_impl.h, res/res_stasis_recording.c:
	  ARI: Fix a crash caused by hanging during playback to a channel
	  in a bridge ASTERISK-24147 #close Reported by: Edvin Vidmar
	  Review: https://reviewboard.asterisk.org/r/3908/ ........ Merged
	  revisions 421879 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-22 14:08 +0000 [r421860]  Matthew Jordan <mjordan@digium.com>

	* main/message.c, /: main/message: Add a new-line to a DEBUG
	  message ........ Merged revisions 421859 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-21 22:07 +0000 [r421802]  Richard Mudgett <rmudgett@digium.com>

	* /, res/res_musiconhold.c: res_musiconhold.c: Remove obsolete
	  REF_DEBUG code. Remove unneeded code that writes to the wrong
	  file location in an obsolete format. ........ Merged revisions
	  421799 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 421800 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421801 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-21 21:42 +0000 [r421790-421797]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_session.c, /: Switch from hostname to an IP address
	  in the SDP origin line. Using the hostname in the SDP origin line
	  may not satisfy the requirement of RFC 4566 that we use a FQDN or
	  IP address. This change has us use the same information from the
	  SDP connection line if possible. If not possible, we'll use the
	  configured media address. And if that's not possible, we use the
	  result of a PJLIB call to get the IP address of ourself.
	  ASTERISK-23994 #close Reported by Private Name Review:
	  https://reviewboard.asterisk.org/r/3925 ........ Merged revisions
	  421796 from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/stasis/control.c: Ensure after-bridge behavior is correct
	  when moving from Stasis to a non-Stasis bridge. Because of the
	  departable state of channels that enter Stasis bridges, Stasis
	  has to take responsibility for directing the channel to its
	  intended after-bridge destination if the channel moves from a
	  Stasis bridge to a non-Stasis bridge. This change ensures that
	  when such a move occurs, when the channel leaves the bridging
	  system, any after bridge gotos are honored. Review:
	  https://reviewboard.asterisk.org/r/3920 ........ Merged revisions
	  421792 from http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_caller_id.c, /: Let's try checking the name and
	  number, instead of the name twice. ........ Merged revisions
	  421789 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-21 21:25 +0000 [r421788]  Jonathan Rose <jrose@digium.com>

	* /, res/res_musiconhold.c: res_musiconhold: Fix reference leaks
	  caused when reloading with REF_DEBUG set Due to a faulty function
	  for debugging reference decrementing, it was possible to reduce
	  the refcount on the wrong object if two moh classes of the same
	  name were in the moh class container. (closes issue
	  ASTERISK-22252) Reported by: Walter Doekes Patches:
	  18_moh_debug_ref_patch.diff Uploaded by Jonathan Rose (license
	  6182) ........ Merged revisions 398937 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 421777 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421779 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-21 21:18 +0000 [r421783]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip_caller_id.c: Improve consistency of party ID
	  privacy usage. Prior to this change, the Remote-Party-ID header
	  took the position of "If caller name and number are not
	  explicitly allowed, then they are private" and
	  P-Asserted-Identity took the position of "Caller name and number
	  are only private if marked explicitly so" Now both mechanisms of
	  conveying party identification use the former approach. ........
	  Merged revisions 421778 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-21 17:34 +0000 [r421675-421720]  Matthew Jordan <mjordan@digium.com>

	* /, channels/chan_sip.c: chan_sip: Don't use port derived from
	  fromdomain if it isn't set If a user does not provide a port in
	  the fromdomain setting, chan_sip will set the fromdomainport to
	  STANDARD_SIP_PORT (5060). The fromdomainport value will then get
	  used unilaterally in certain places. This causes issues with TLS,
	  where the default port is expected to be 5061. This patch
	  modifies chan_sip such that fromdomainport is only used if it is
	  not the standard SIP port; otherwise, the port from the SIP pvt's
	  recorded self IP address is used. Review:
	  https://reviewboard.asterisk.org/r/3893/ ASTERISK-24178 #close
	  Reported by: Elazar Broad patches: fromdomainport_fix.diff
	  uploaded by Elazar Broad (License 5835) ........ Merged revisions
	  421717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 421718 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421719 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, UPGRADE.txt, main/app.c: ARI: Fix implicit answer when
	  playback is initiated on unanswered channel When issuing a POST
	  /channels/{channel_id}/play on a channel that is not yet
	  answered, ARI is supposed to: * Queue up an AST_CONTROL_PROGRESS
	  on the channel * Start up the playback of the media Instead, we
	  sneak an answer on the channel right before starting playing
	  media. This is due to ARI's usage of control_streamfile. This
	  function implicitly answers the channel (and doesn't give ARI the
	  option to stop it). The answering of the channel here is probably
	  unnecessary: * app_voicemail, by far the biggest consumer of this
	  function, always answers the channels anyway * control stream
	  file (in res_agi) and ControlPlayback probably shouldn't be
	  implicitly answering the channel. Answering should not be tied
	  directly to playing back media. As it turns out, the answering of
	  the channel here is pretty old: 356042 twilson if
	  (ast_channel_state(chan) != AST_STATE_UP) { 3087 anthm res =
	  ast_answer(chan); 180259 tilghman } (As in, ancient?) Note that
	  others ran into this problem and commented about it on various
	  mailing lists. Review: https://reviewboard.asterisk.org/r/3907/
	  ASTERISK-24229 #close Reported by: Matt Jordan ........ Merged
	  revisions 421695 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/stasis/messaging.h, main/dns.c, /, main/format_cache.c: Clean
	  up files that do not end with newlines Trivial patch to add new
	  lines to several files missing them. This fixes warnings when
	  compiling with gcc 4.1.2 on CentOS 5. ASTERISK-24245 #close
	  Reported by: Shaun Ruffell patches:
	  0002-Trivial-addition-of-newlines-at-end-of-three-files.patch
	  uploaded by Shaun Ruffell (License 5417) ........ Merged
	  revisions 421677 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/uri.h, main/uri.c: uri: Quiet warning about type
	  qualifiers ignored on function return type This patch fixes gcc
	  warnings that occur due to the type qualifier 'const' being
	  ignored on a return type of int. ASTERISK-24246 #close Reported
	  by: Shaun Ruffell patches:
	  0001-main-uri-Quiet-warning-about-ignored-attribute-on-re.patch
	  uploaded by Shaun Ruffell (License 5417)

2014-08-20 22:49 +0000 [r421616-421645]  Richard Mudgett <rmudgett@digium.com>

	* main/bridge.c, res/res_pjsip_sdp_rtp.c, main/file.c,
	  main/bridge_channel.c, channels/chan_pjsip.c, main/channel.c:
	  chan_pjsip: Update media translation paths when new SDP
	  negotiated. On a SIP reinvite that changes media strams, the
	  PJSIP channel driver was flooding the log with "Asked to transmit
	  frame type %s, while native formats is %s" warnings. * Fixes
	  PJSIP not setting up translation paths when the formats change on
	  a reinvite. AFS-63 was effectively reintroduced because of the
	  media formats work. res_pjsip_sdp_rtp.c:set_caps() * Improved the
	  unexpected frame format WARNING message to include more
	  information. * Added protective locking while altering formats on
	  a channel. Reworked set_format() to simplify and protect the
	  formats under manipulation. * Restored some code that got lost in
	  the media_formats work. (channel.c:set_format() and
	  res_pjsip_sdp_rtp.c:set_caps()) AFS-137 #close Reported by: Mark
	  Michelson Review: https://reviewboard.asterisk.org/r/3906/

	* /, main/cli.c: cli.c: Fix tab completion of "module load" when
	  MALLOC_DEBUG is enabled. filename_completion_function() returns
	  memory that was not allocated by the MALLOC_DEBUG allocation
	  tracker so the memory must be freed by ast_std_free(). ........
	  Merged revisions 421600 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 421602 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421608 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-20 20:40 +0000 [r421566-421585]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_pubsub.c: Set the role for inbound subscriptions
	  correctly. This was causing the AMI show_subscriptions test in
	  the testsuite to fail since all subscriptions were being seen as
	  subscribers instead of notifiers.

	* /, channels/chan_pjsip.c: Move evaluation of set_var options in
	  pjsip to the end of channel initialization. This allows for
	  set_var to override certain defaults such as caller ID and codec
	  values. This also fixes a test suite regression. The "set_var"
	  test suite test attempted to use set_var to override caller ID,
	  but a recent change caused that to no longer work. ........
	  Merged revisions 421565 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-20 13:04 +0000 [r421538]  Kinsey Moore <kmoore@digium.com>

	* include/asterisk/stasis_bridges.h, tests/test_cel.c,
	  res/ari/ari_model_validators.c, main/stasis_bridges.c,
	  res/ari/ari_model_validators.h, rest-api/api-docs/events.json, /,
	  res/stasis/app.c, main/bridge.c: Stasis: Add information to blind
	  transfer event When a blind transfer occurs that is forced to
	  create a local channel pair to satisfy the transfer request,
	  information about the local channel pair is not published. This
	  adds a field to describe that channel to the blind transfer
	  message struct so that this information is conveyed properly to
	  consumers of the blind transfer message. This also fixes a bug in
	  which Stasis() was unable to properly identify the channel that
	  was replacing an existing Stasis-controlled channel due to a
	  blind transfer. Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3921/ ........ Merged
	  revisions 421537 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-19 20:28 +0000 [r421448-421488]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip.c: Alter documentation for callerid_privacy to
	  use correct values. ........ Merged revisions 421485 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis.c, /: Fix compilation error on certain versions of
	  GCC. ........ Merged revisions 421447 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-19 19:42 +0000 [r421445]  Kinsey Moore <kmoore@digium.com>

	* main/manager.c, /: AMI Docs: Fix Status channel parameter
	  optionality ........ Merged revisions 421442 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 421443 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421444 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-19 16:28 +0000 [r421423]  Jonathan Rose <jrose@digium.com>

	* res/res_stasis.c, /: ARI: Fix a bug where
	  /channels/{channelID}/continue doesn't execute PBX If
	  /channels/{channelID}/continue is called on a channel that was
	  originated without a PBX (such as the ARI command POST channel
	  with a stasis application argument), the channel will not start
	  dialplan execution. This patch will now run the PBX out of the
	  stasis execution if the channel doesn't currently have an active
	  PBX upon continuing. ASTERISK-24043 #close Reported by: Krandon
	  Bruse Review: https://reviewboard.asterisk.org/r/3917/ Patches:
	  stasis-continue.diff submitted by Krandon Bruse (license 6631)
	  ........ Merged revisions 421416 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-19 16:11 +0000 [r421403]  Richard Mudgett <rmudgett@digium.com>

	* /, res/res_pjsip_caller_id.c, channels/chan_pjsip.c,
	  res/res_pjsip_session.c: chan_pjsip: Fix attended transfer
	  connected line name update. A calls B B answers B SIP attended
	  transfers to C C answers, B and C can see each other's connected
	  line information B completes the transfer A has number but no
	  name connected line information about C while C has the full
	  information about A I examined the incoming and outgoing party id
	  information handling of chan_pjsip and found several issues: *
	  Fixed ast_sip_session_create_outgoing() not setting up the
	  configured endpoint id as the new channel's caller id. This is
	  why party A got default connected line information. * Made
	  update_initial_connected_line() use the channel's CALLERID(id)
	  information. The core, app_dial, or predial routine may have
	  filled in or changed the endpoint caller id information. * Fixed
	  chan_pjsip_new() not setting the full party id information
	  available on the caller id and ANI party id. This includes the
	  configured callerid_tag string and other party id fields. * Fixed
	  accessing channel party id information without the channel lock
	  held. * Fixed using the effective connected line id without doing
	  a deep copy outside of holding the channel lock. Shallow copy
	  string pointers can become stale if the channel lock is not held.
	  * Made queue_connected_line_update() also update the channel's
	  CALLERID(id) information. Moving the channel to another bridge
	  would need the information there for the new bridge peer. * Fixed
	  off nominal memory leak in update_incoming_connected_line(). *
	  Added pjsip.conf callerid_tag string to party id information from
	  enabled trust_inbound endpoint in caller_id_incoming_request().
	  AFS-98 #close Reported by: Mark Michelson Review:
	  https://reviewboard.asterisk.org/r/3913/ ........ Merged
	  revisions 421400 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-18 21:10 +0000 [r421376]  Damien Wedhorn <voip@facts.com.au>

	* channels/chan_skinny.c: Skinny: Fixup compile warning for non
	  dev-mode.

2014-08-18 20:19 +0000 [r421337]  George Joseph <george.joseph@fairview5.com>

	* funcs/func_config.c, /: func_config: Change 'Not Found' message
	  from ERROR to DEBUG When you call the CONFIG dialplan function
	  with the name of a variable that doesn't exist in the target
	  context you get an ERROR. This does nothing but clutter up the
	  logs with messages that may be perfectly acceptable. Just because
	  a variable wasn't in the context doesn't mean it's an error.
	  Maybei t's optional or just needs to be defaulted or ignored.
	  This patch changes the log level from ERROR to DEBUG. If a
	  dialplan developer wants to debug their dialplan they still canby
	  setting the console debug level as needed. Tested by: George
	  Joseph Review: https://reviewboard.asterisk.org/r/3919/ ........
	  Merged revisions 421327 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 421328 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421329 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-18 01:13 +0000 [r421230-421312]  Matthew Jordan <mjordan@digium.com>

	* res/ari/resource_channels.c: res/ari/resource_channels: Fix
	  compilation issue Forgot a parameter. Whoops.

	* res/ari/resource_channels.c: res/ari/resource_channels: Don't
	  return allocation failure on failed function If a function fails
	  to execute, it is most likely due to one of two reasons: (1) The
	  function doesn't exist or can't be read from (2) The function is
	  dangerous and is restricted based on the user's permissions
	  Currently we return allocation failure, which is incorrect. This
	  updates the reason code to more accurately reflect why the
	  request failed. ASTERISK-24215

	* /, apps/app_meetme.c: apps/app_meetme: Fix crash when publishing
	  MeetMe messages with no channel The same function,
	  meetme_stasis_generate_msg, handles creating and publishing
	  Stasis message both when there are channels in the MeetMe
	  conference and when there are no channels in the conference. When
	  the performance improvement was made to use cached snapshots,
	  this created a situation where Asterisk would crash: obtaining a
	  cached snapshot is not NULL tolerant. This patch restores the
	  previous implementation, which used a NULL safe set of routines
	  to produce a blob containing the channel snapshot (if available)
	  and information about the MeetMe conference. ASTERISK-24234
	  #close Reported by: Shaun Ruffell Tested by: Shaun Ruffell
	  ........ Merged revisions 421270 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/app_dial.c, /: apps/app_dial: Fix Dial 'z' option The 'z'
	  option is supposed to disable the dial timeout in the case of a
	  call forward. Unfortunately, the wrong timeout timer was passed
	  to the do_forward function, resulting in the option not working.
	  ASTERISK-24225 #close Reported by: dimitripietro Tested by:
	  dimitripietro patches: jira_asterisk_24225_v1.8.patch uploaded by
	  rmudgett (License 5621) jira_asterisk_24225_v11.patch uploaded by
	  rmudgett (License 5621) ........ Merged revisions 421232 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 421233 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421234 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, configure, configure.ac: configure: Undefine FORTIFY_SOURCE
	  prior to defining it for patched gcc Some distributions of Linux
	  patch gcc to define FORTIFY_SOURCE when gcc is executed with
	  optimization. This "help" unfortunately results in re-definition
	  warnings when FORTIFY_SOURCE is later defined in Asterisk's build
	  system. This patch undefines FORTIFY_SOURCE prior to defining it
	  to prevent this warning. Review:
	  https://reviewboard.asterisk.org/r/3912/ ASTERISK-24032 #close
	  Reported by: Kilburn Tested by: Kilburn, wdoekes patches:
	  1.8.diff uploaded by cloos (License 5956) 10.diff uploaded by
	  cloos (License 5956) 11.diff uploaded by cloos (License 5956)
	  12.diff uploaded by cloos (License 5956) 13.diff uploaded by
	  cloos (License 5956) ........ Merged revisions 421227 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 421228 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421229 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-17 16:10 +0000 [r421210]  Joshua Colp <jcolp@digium.com>

	* res/res_http_websocket.c: res_http_websocket: Include query
	  parameters in client connection requests. Review:
	  https://reviewboard.asterisk.org/r/3914/

2014-08-15 17:08 +0000 [r421187]  Jonathan Rose <jrose@digium.com>

	* main/channel.c, /: Bridging: Fix a behavioral change when
	  checking if a channel is leaving a bridge r420934 introduced some
	  failures in the test suite. Upon investigating, it was discovered
	  that differences in the way we were evaluating whether a channel
	  was in the process of leaving a bridge were causing some
	  reinvites not to occur (mostly reinvites back to Asterisk when
	  ending a call). This patch fixes that behavioral change.
	  ASTERISK-24027 #close Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3910/ ........ Merged
	  revisions 421186 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-15 15:45 +0000 [r421042-421166]  Matthew Jordan <mjordan@digium.com>

	* apps/app_voicemail.c, /, main/app.c: app_voicemail/app: Remove
	  test events that were duplicated by r421059 Moving the test event
	  raised when a file is played back (which occurred in r421059)
	  broke the ever loving snot out of the voicemail tests. This
	  caused duplicate test events to get raised, as app_voicemail and
	  main/app were raising events prior to call ast_streamfile. The
	  voicemail tests did not enjoy getting multiple events. Since
	  raising the playback event in ast_streamfile is far more useful
	  to the vast majority of tests, this patch keeps the call there
	  and simply removes the extraneous calls that duplicated the
	  event. ........ Merged revisions 421125 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 421164 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421165 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_hep_rtcp.c, /: res/res_hep_rtcp: Remove dependency on
	  PJSIP The res_hep_rtcp module was incorrectly including
	  <pjsip.h>. This didn't need to be included, as the module does
	  not using PJPROJECT any fashion. Unfortunately, because
	  res_hep_rtcp did not include pjsip in its MODULEINFO as a
	  dependency, this also meant that res_hep_rtcp will fail to
	  compile on a system without PJPROJECT. This patch removes the
	  include. Thanks to Damien Wedhorn for pointing this out in
	  #asterisk-dev. ASTERISK-24236 #close Reported by: Damien Wedhorn,
	  Matt Jordan Tested by: Damien Wedhorn ........ Merged revisions
	  421064 from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/file.c, main/app.c: main/file: Move test event to emit
	  PLAYBACK event more consistently This is being done in advance of
	  the test for ASTERISK-23953 ........ Merged revisions 421059 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 421060 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 421061 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* tests/test_cel.c, main/cel.c, /: cel: Make sure channels in extra
	  fields include their unique IDs as well CEL typically tracks a
	  lot of information using the unique ID of the channel. This is
	  typically needed due to tying events together using the linked ID
	  of the various channels involved in a "call", which is derived
	  from the channel ID of the oldest channel involved in a bridge
	  (or in the case of a Dial, the parent channel). Previously, we
	  had updated the extra fields to include the involved channel
	  names, but forgot to put in the unique ID. This patch corrects
	  that error. ........ Merged revisions 421037 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-14 16:32 +0000 [r420957-421010]  Richard Mudgett <rmudgett@digium.com>

	* /, res/ari/resource_channels.c: ARI: Originate to app local
	  channel subscription code optimization. Reduce the scope of
	  local_peer and only get it if the ARI originate is subscribing to
	  the channels. Review: https://reviewboard.asterisk.org/r/3905/
	  ........ Merged revisions 421009 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/channel_internal_api.c, main/channel.c:
	  channel_internal_api.c: Replace some code with ao2_replace(). Use
	  ao2_replace() instead of ao2_cleanup(); ao2_bump(). ao2_replace()
	  has the advantange of not altering the ref count if the replaced
	  pointer is the same. Review:
	  https://reviewboard.asterisk.org/r/3904/

	* /, res/res_pjsip_send_to_voicemail.c:
	  res_pjsip_send_to_voicemail.c: Fix svn file properties. ........
	  Merged revisions 420956 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-13 16:53 +0000 [r420950]  Kinsey Moore <kmoore@digium.com>

	* res/res_pjsip.c, /: PJSIP: Prevent crash no-URI contacts This
	  prevents a crash from occurring when a contact with no URI is
	  used for the creation of an outbound out-of-dialog request with
	  no associated endpoint. ........ Merged revisions 420949 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-13 16:07 +0000 [r420940]  Jonathan Rose <jrose@digium.com>

	* main/bridge_after.c, main/channel_internal_api.c,
	  include/asterisk/channel.h, apps/app_chanspy.c,
	  apps/app_mixmonitor.c, apps/app_stack.c, main/bridge_channel.c,
	  main/channel.c, main/pbx.c, /, main/framehook.c: Bridges: Fix
	  feature interruption/unintended kick caused by external actions
	  If a manager or CLI user attached a mixmonitor to a call running
	  a dynamic bridge feature while in a bridge, the feature would be
	  interrupted and the channel would be forcibly kicked out of the
	  bridge (usually ending the call during a simple 1 to 1 call).
	  This would also occur during any similar action that could set
	  the unbridge soft hangup flag, so the fix for this was to remove
	  unbridge from the soft hangup flags and make it a separate thing
	  all together. ASTERISK-24027 #close Reported by: mjordan Review:
	  https://reviewboard.asterisk.org/r/3900/ ........ Merged
	  revisions 420934 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-13 14:24 +0000 [r420919]  Kinsey Moore <kmoore@digium.com>

	* main/manager.c: AMI: Improve documentation for Status action

2014-08-13 07:52 +0000 [r420899]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, main/logger.c: logger: Don't store verbose-magic in the log
	  files. In r399267, the verbose2magic stuff was edited. This time
	  it results in magic characters in the log files for multiline
	  messages. In trunk (and 13) this was fixed by the "stripping" of
	  those characters from multiline messages (in r414798). This fix
	  is altered to actually strip the characters and not replace them
	  with blanks. Review: https://reviewboard.asterisk.org/r/3901/
	  Review: https://reviewboard.asterisk.org/r/3902/ ........ Merged
	  revisions 420897 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 420898 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-12 23:43 +0000 [r420879-420881]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_sip.c: chan_sip: Fix type mismatch when the format
	  is changed. Symptom is most likely an invalid ao2 object bad
	  magic number message or a less likely crash.

	* res/res_stasis_snoop.c: res_stasis_snoop.c: Fix off nominial exit
	  path leaving Snoop channel locked and not hungup. * Made use
	  ast_copy_string() instead of strcpy() for snoop uniqueid for
	  safety. There is no guarantee that the max channel uniqueid
	  length will remain the same as the snoop uniqueid space.

2014-08-12 11:17 +0000 [r420856]  Joshua Colp <jcolp@digium.com>

	* apps/app_voicemail.c: app_voicemail: Fix the
	  "test_voicemail_vm_info" unit test.

2014-08-11 20:53 +0000 [r420837]  Richard Mudgett <rmudgett@digium.com>

	* res/stasis/command.c, /: res/stasis/command.c: Fix recent commit
	  using spaces instead of tabs. ........ Merged revisions 420836
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-11 18:50 +0000 [r420808]  Matthew Jordan <mjordan@digium.com>

	* rest-api/api-docs/playbacks.json,
	  rest-api/api-docs/channels.json, rest-api/api-docs/sounds.json,
	  rest-api/resources.json, include/asterisk/manager.h,
	  rest-api/api-docs/bridges.json,
	  rest-api/api-docs/recordings.json,
	  rest-api/api-docs/deviceStates.json,
	  rest-api/api-docs/endpoints.json,
	  rest-api/api-docs/mailboxes.json, rest-api/api-docs/events.json,
	  /, rest-api/api-docs/asterisk.json,
	  rest-api/api-docs/applications.json: AMI/ARI: Update version to
	  2.5.0/1.5.0 respectively This is to support the backwards
	  compatible changes made in the next version of Asterisk. ........
	  Merged revisions 420805 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-11 18:46 +0000 [r420796-420803]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_stasis.c: Stasis: Use the correct return value Return
	  the correct value instead of always returning 0 when setting
	  internal status on unreal channels. Reported by: Richard Mudgett
	  ........ Merged revisions 420802 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis.c, res/ari/resource_bridges.c, /,
	  res/stasis/stasis_bridge.c, include/asterisk/stasis_app.h:
	  Stasis: Allow internal channels directly into bridges The patch
	  to catch channels being shoehorned into Stasis() via external
	  mechanisms also happens to catch Announcer and Recorder channels
	  because they aren't known to be stasis-controlled channels in the
	  usual sense. This marks those channels as Stasis()-internal
	  channels and allows them directly into bridges. Review:
	  https://reviewboard.asterisk.org/r/3903/ ........ Merged
	  revisions 420795 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-11 18:32 +0000 [r420758-420794]  Mark Michelson <mmichelson@digium.com>

	* include/asterisk/stasis_app.h, main/stasis_channels.c,
	  res/ari/resource_channels.c, CHANGES, res/res_pjsip_pubsub.c,
	  main/manager_channels.c, apps/app_dial.c, res/stasis/app.c,
	  res/stasis/control.c: Improve call forwarding reporting,
	  especially with regards to ARI. This patch addresses a few
	  issues: 1) The order of Dial events have been changed when
	  performing a call forward. The order has now been altered to 1)
	  Dial begins dialing channel A. 2) When A forwards the call to B,
	  we issue the dial end event to channel A, indicating the dial is
	  being canceled due to a forward to B. 3) When the call to channel
	  B occurs, we then issue a new dial begin to channel B. 2) Call
	  forwards are now reported on the calling channel, not the peer
	  channel. 3) AMI DialEnd events have been altered to display the
	  extension the call is being forwarded to when relevant. 4) You
	  can now get the values of channel variables for channels that are
	  not currently in the Stasis application. This brings the
	  retrieval of channel variables more in line with the rest of
	  channel read operations since they may be performed on channels
	  not in Stasis. ASTERISK-24134 #close Reported by Matt Jordan
	  ASTERISK-24138 #close Reported by Matt Jordan Patches:
	  forward-shenanigans.diff uploaded by Matt Jordan (License #6283)
	  Review: https://reviewboard.asterisk.org/r/3899

	* res/res_pjsip_pubsub.c: Fix crashing unit tests with regards to
	  RLS. The unit tests require a sorcery.conf file that has been set
	  up to store resource lists in memory rather than retrieving from
	  configuration. With a setup that is not conducive to running the
	  tests, a fault in sorcery currently causes Asterisk to crash when
	  attempting to run any of the tests. To get around the crash, this
	  adds a function that verifies the current environment and marks
	  the tests as "not run" if the setup is not correct.

	* res/res_pjsip_pubsub.c: Fix crash encountered by the testsuite.
	  Running testsuite tests locally produced no errors, but when run
	  using the continuous integration framework, crashes occurred. The
	  crashes occurred due to a refcounting error that had been fixed
	  for a similar situation.

2014-08-11 13:57 +0000 [r420742]  Matthew Jordan <mjordan@digium.com>

	* res/res_hep.c, res/res_hep_pjsip.c, res/res_hep_rtcp.c: res_hep:
	  Remove disabling of modules These modules were originally
	  specified as being disabled, as they were introduced midstream in
	  Asterisk 12. That makes it nicer for folks who are upgrading to a
	  new release in the middle of Asterisk 12. That's not the case for
	  Asterisk 13: it's a brand new release. There's no reason to have
	  the modules disabled by default in that case.

2014-08-11 10:40 +0000 [r420657-420717]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, main/utils.c: general: Fix memory Corruption in
	  __ast_string_field_ptr_build_va. If the space left in a
	  stringfield is between 0 and
	  (alignof(ast_string_field_allocation)-1) adding new data would
	  cause memory corruption, because we would assume enough space
	  (unsigned underrun). Thanks Arnd Schmitter for reporting and
	  finding out the cause! ASTERISK-23508 #close Reported by: Arnd
	  Schmitter Tested by: Arnd Schmitter, JoshE Review:
	  https://reviewboard.asterisk.org/r/3898/ ........ Merged
	  revisions 420680 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 420715 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 420716 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/tcptls.c, /: tcptls: Avoid compiler warning on non-dev-mode.
	  ........ Merged revisions 420654 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 420655 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 420656 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-11 01:31 +0000 [r420607-420639]  Matthew Jordan <mjordan@digium.com>

	* funcs/func_jitterbuffer.c: funcs/func_jitterbuffer: Tweak
	  documentation This patch merely reformats and cleans up a bit of
	  the jitterbuffer documentation for the wiki.

	* UPGRADE.txt, configs/samples/extconfig.conf.sample, CHANGES,
	  apps/app_queue.c,
	  contrib/ast-db-manage/config/versions/d39508cb8d8_create_queue_rules.py
	  (added), configs/samples/queuerules.conf.sample: app_queue: Add
	  RealTime support for queue rules This patch gives the optional
	  ability to keep queue rules in RealTime. It is important to note
	  that with this patch: (a) Queue rules in RealTime are only
	  examined on module load/reload (b) Queue rules are loaded both
	  from the queuerules.conf file as well as the RealTime backend To
	  inform app_queue to examine RealTime for queue rules, a new
	  setting has been added to queuerules.conf's general section
	  "realtime_rules". RealTime queue rules will only be used when
	  this setting is set to "yes". The schema for the database table
	  supports a rule_name, time, min_penalty, and max_penalty columns.
	  min_penalty and max_penalty can be relative, if a '-' or '+'
	  literal is provided. Otherwise, the penalties are treated as
	  constants. For example: rule_name, time, min_penalty, max_penalty
	  'default', '10', '20', '30' 'test2', '20', '30', '55' 'test2',
	  '25', '-11', '+1111' 'test2', '400', '112', '333' 'test3', '0',
	  '4564', '46546' 'test_rule', '40', '15', '50' which would result
	  in : Rule: default - After 10 seconds, adjust QUEUE_MAX_PENALTY
	  to 30 and adjust QUEUE_MIN_PENALTY to 20 Rule: test2 - After 20
	  seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
	  QUEUE_MIN_PENALTY to 30 - After 25 seconds, adjust
	  QUEUE_MAX_PENALTY by 1111 and adjust QUEUE_MIN_PENALTY by -11 -
	  After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
	  QUEUE_MIN_PENALTY to 112 Rule: test3 - After 0 seconds, adjust
	  QUEUE_MAX_PENALTY to 46546 and adjust QUEUE_MIN_PENALTY to 4564
	  Rule: test_rule - After 40 seconds, adjust QUEUE_MAX_PENALTY to
	  50 and adjust QUEUE_MIN_PENALTY to 15 If you use RealTime, the
	  queue rules will be always reloaded on a module reload, even if
	  the underlying file did not change. With the option disabled, the
	  rules will only be reloaded if the file was modified. Review:
	  https://reviewboard.asterisk.org/r/3607/ ASTERISK-23823 #close
	  Reported by: Michael K patches: app_queue.c_realtime_trunk.patch
	  uploaded by Michael K (License 6621)

	* CHANGES: Update CHANGES file

	* UPGRADE.txt: Update UPGRADE.txt file

2014-08-08 20:08 +0000 [r420577-420592]  Jason Parker <jparker@digium.com>

	* apps/app_voicemail.c: Fix build in devmode.

	* CHANGES, configs/samples/voicemail.conf.sample,
	  apps/app_voicemail.c: app_voicemail: Add the ability to specify
	  multiple email addresses. ASTERISK-24045 Reported by: Jacob
	  Barber Review: https://reviewboard.asterisk.org/r/3833/

2014-08-08 17:53 +0000 [r420534-420562]  Matthew Jordan <mjordan@digium.com>

	* channels/chan_sip.c, channels/sip/security_events.c,
	  channels/sip/dialplan_functions.c, channels/sip/reqresp_parser.c,
	  channels/sip/route.c, channels/sip/utils.c,
	  channels/sip/config_parser.c: chan_sip: Mark chan_sip and its
	  files as extended support

	* rest-api-templates/make_ari_stubs.py: make_ari_stubs: Update wiki
	  prefix to '13'

	* rest-api-templates/res_ari_resource.c.mustache:
	  res_ari_resource.c.mustache: Update template to emit module
	  support level

	* main/message.c, /: main/message: remove debug message ........
	  Merged revisions 420533 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-08 03:03 +0000 [r420514]  Kinsey Moore <kmoore@digium.com>

	* tests/test_cel.c, /: CEL: Update unit tests for additional
	  information This updates the CEL unit tests for the new
	  information contained in the attended transfer CEL extra field.
	  ........ Merged revisions 420513 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-08 01:31 +0000 [r420494-420496]  Matthew Jordan <mjordan@digium.com>

	* UPGRADE.txt: Update UPGRADE file for 13 branch

	* /: Remove old properties

	* / (added): ___ _ _ _ __ _____ / _ \ | | (_) | | / ||____ | / /_\
	  \___| |_ ___ _ __ _ ___| | __ `| | / / | _ / __| __/ _ | '__| /
	  __| |/ / | | \ \ | | | \__ | || __| | | \__ | < _| |.___/ / \_|
	  |_|___/\__\___|_| |_|___|_|\_\ \___\____/

2014-08-07 21:58 +0000 [r420437]  Richard Mudgett <rmudgett@digium.com>

	* /, channels/chan_sip.c: chan_sip: Replace sip_tls_read() and
	  resolve the large SDP poll issue. Replace sip_tls_read() and
	  sip_tcp_read() with a single function and resolve the poll/wait
	  issue with large SDP payloads. ASTERISK-18345 #close Reported by:
	  Stephane Chazelas Patches: tcptls_pollv4.diff (license #5835)
	  patch uploaded by Elazar Broad Review:
	  https://reviewboard.asterisk.org/r/3882/ ........ Merged
	  revisions 420434 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 420435 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 420436 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-07 21:17 +0000 [r420389-420415]  Kinsey Moore <kmoore@digium.com>

	* main/stasis_bridges.c, /: Stasis: Correct blind transfer message
	  generation This fixes the json object creation format string and
	  key name for the BridgeBlindTransfer Stasis event allowing it to
	  be published properly. ........ Merged revisions 420414 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis_bridges.c, /: Stasis: Ensure transfer messages follow
	  validation rules This makes Stasis() event generation for
	  transfer messages follow validation rules. Currently,
	  ast_json_null() is being used in place of omitting a key entirely
	  which falls afoul of these validation rules.
	  https://reviewboard.asterisk.org/r/3892/ ........ Merged
	  revisions 420408 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_pubsub.c: Fix build in dev mode

2014-08-07 19:44 +0000 [r420384-420388]  Mark Michelson <mmichelson@digium.com>

	* /, main/bridge.c: Ensure bridges exist when trying to determine
	  bridged parties when publishing transfer information. ........
	  Merged revisions 420387 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/strings.c, include/asterisk/res_pjsip_presence_xml.h,
	  res/res_pjsip_mwi.c, res/res_pjsip_dialog_info_body_generator.c,
	  res/res_pjsip_xpidf_body_generator.c, include/asterisk/strings.h,
	  res/res_pjsip_pubsub.c, res/res_pjsip_exten_state.c,
	  include/asterisk/res_pjsip_pubsub.h,
	  res/res_pjsip_pidf_body_generator.c: Add support for RFC 4662
	  resource list subscriptions. This commit adds the ability for a
	  user to configure a resource list in pjsip.conf. Subscribing to
	  this list simultaneously subscribes the subscriber to all
	  resources listed. This has the potential to reduce the amount of
	  SIP traffic when loads of subscribers on a system attempt to
	  subscribe to each others' states.

2014-08-07 18:51 +0000 [r420364]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/format_compatibility.h,
	  channels/iax2/format_compatibility.c,
	  channels/iax2/include/codec_pref.h, main/format_compatibility.c,
	  channels/chan_iax2.c, channels/iax2/codec_pref.c,
	  channels/iax2/include/format_compatibility.h: chan_iax2: Several
	  media format fixes. * Fixed the iax.conf bandwidth option. This
	  is the root cause of ASTERISK-24150. * Added checks in
	  iax2_request() to ensure that there are actual formats requested
	  for the new channel to prevent any more fracks from issues like
	  ASTERISK-24150. This is a consequence of the iax.conf bandwidth
	  option not working. * Fixed struct iax2_codec_pref.order member
	  size mismatch issue when converting to and from the codec
	  preference order list passed over the wire. In addition the
	  values sent over the wire are now compatible with previous
	  Asterisk versions. * Fixed several issues dealing with the struct
	  iax2_codec_pref members. Off-by-one, array limit errors, and the
	  order/framing members always need to be updated together. * Made
	  iax2_request() setup the channel's native format preference order
	  according to the user's wishes. The new media format strategy
	  needs the order specified earler. * Fixed usage of
	  ast_format_compatibility_bitfield2format(). The function can
	  return NULL if the bitfield was not associated with a function. *
	  Deleted dead code iax2_codec_pref_getsize() and
	  iax2_codec_pref_setsize(). * Made iax2_parse_allow_disallow() and
	  iax2_codec_pref_string() call iax2_codec_pref_to_cap() instead of
	  inlining it. * Made IAX_CAPABILITY_MEDBANDWIDTH,
	  IAX_CAPABILITY_LOWBANDWIDTH, and IAX_CAPABILITY_LOWFREE constants
	  again as they were in Asterisk v1.8. * Renamed prefs to
	  prefs_global so it won't get confused with the local pref
	  versions. * Fixed too small buffer in
	  handle_cli_iax2_show_peer(). * Fixed ast_cli() calls in
	  handle_cli_iax2_show_peer() to output complete lines. * Changed
	  struct create_addr_info.prefs to be struct iax2_codec_pref as an
	  optimization so iax2_request() and iax2_call() do less work. *
	  Fixed a potential deadlock in ast_iax2_new() on an off-nominal
	  path when the pbx could not get started. * Made set_config()
	  setup a local prefs list along side the local capability format
	  bitfield. Once the config is loaded, then the local copies are
	  put into the global versions. * Fix unininialized codec_buf in
	  function_iaxpeer(). ASTERISK-24150 #close Reported by: Scott
	  Griepentrog Review: https://reviewboard.asterisk.org/r/3890/

2014-08-07 15:30 +0000 [r420338]  Kinsey Moore <kmoore@digium.com>

	* include/asterisk/bridge_features.h, res/res_stasis.c,
	  res/stasis/command.c, rest-api/api-docs/events.json, /,
	  res/stasis/app.c, res/stasis/control.c, main/bridge.c,
	  main/bridge_basic.c, res/stasis/stasis_bridge.c,
	  include/asterisk/stasis_bridges.h, res/stasis/command.h,
	  include/asterisk/stasis_app.h, res/stasis/app.h,
	  res/stasis/control.h, apps/app_queue.c,
	  res/ari/ari_model_validators.c, main/cel.c,
	  main/stasis_bridges.c, res/ari/ari_model_validators.h,
	  main/channel.c, include/asterisk/datastore.h, tests/test_cel.c:
	  Stasis: Convey transfer information to applications This fixes a
	  class of issues where Stasis applications were not made aware
	  that their channels were being manipulated or replaced by
	  external entitiessuch as transfers, AMI commands, or dialplan
	  applications such as Bridge(). Inconsistent information such as
	  StasisEnd events with unknown channels as a result of masquerades
	  has also been corrected. To accomplish these fixes, several new
	  fields were added to blind and attended transfer messages as well
	  as StasisStart and BridgeAttendedTransfer Stasis events.
	  ASTERISK-23941 #close Review:
	  https://reviewboard.asterisk.org/r/3865/ Review:
	  https://reviewboard.asterisk.org/r/3857/ Review:
	  https://reviewboard.asterisk.org/r/3852/ Review:
	  https://reviewboard.asterisk.org/r/3816/ Review:
	  https://reviewboard.asterisk.org/r/3731/ Review:
	  https://reviewboard.asterisk.org/r/3729/ Review:
	  https://reviewboard.asterisk.org/r/3728/ ........ Merged
	  revisions 420325 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-07 14:37 +0000 [r420314-420315]  Joshua Colp <jcolp@digium.com>

	* include/asterisk/res_pjsip_pubsub.h,
	  res/res_pjsip_pubsub.exports.in, res/res_pjsip_publish_asterisk.c
	  (added), res/res_pjsip_pubsub.c: res_pjsip_publish_asterisk: Add
	  support for exchanging device and mailbox state using SIP. This
	  module uses the inbound and outbound PUBLISH support to exchange
	  device and mailbox state between Asterisk instances. Each
	  instance is configured to publish to the other and requires no
	  intermediary server. The functionality provided is similar to the
	  XMPP and Corosync support. Review:
	  https://reviewboard.asterisk.org/r/3780/

	* include/asterisk/res_pjsip_outbound_publish.h (added),
	  res/res_pjsip_outbound_publish.exports.in (added),
	  res/res_pjsip_outbound_publish.c (added):
	  res_pjsip_outbound_publish: Add module which provides outbound
	  PUBLISH support. This module implements the core parts required
	  for doing outbound PUBLISH. It takes care of configuration,
	  lifetime management, and authentication. Additional modules
	  implement the specific events that are published. Review:
	  https://reviewboard.asterisk.org/r/3780/

2014-08-07 14:17 +0000 [r420289-420309]  Matthew Jordan <mjordan@digium.com>

	* main/pbx.c: pbx: Filter out pattern matching hints in responses
	  sent to ExtensionStateList Hints that are a pattern match are
	  technically stored in the hint container in the same fashion as
	  concrete implementations of hints. The pattern matching hints,
	  however, are not "real" in the sense that things can subscribe to
	  them: rather, they are stored in the hints container so that when
	  a subscription is made a "real" hint can be generated for the
	  subscription if one does not yet exist. The extension state core
	  takes care of this correctly by matching against non-pattern
	  matching extensions prior to pattern matching extensions. Because
	  of this, however, the ExtensionStateList AMI action was returning
	  pattern matching hints when executed. These hints are meaningless
	  from the perspective of AMI clients: their state will never
	  change, they cannot be subscribed to, and events would never
	  normally be generated from them. As such, we now filter these out
	  of the response.

	* build_tools/post_process_documentation.py: build_tools: Skip
	  managerEvent combining for AMI action responses AMI action
	  responses can (and will) reference AMI events that they return.
	  These event references and definitions should not be combined
	  with AMI events raised elsewhere in the code, as they are
	  specifically tied to the AMI action that raised them.
	  ASTERISK-24156 #close Reported by: Rusty Newton

2014-08-06 18:12 +0000 [r420212-420237]  Richard Mudgett <rmudgett@digium.com>

	* contrib/ast-db-manage/config/versions/2fc7930b41b3_add_pjsip_endpoint_options_for_12_1.py,
	  /: Fix alembic script to work properly in offline mode. When run
	  in offline mode, this would attempt to check the database for the
	  presence of a type it was going to try to create. I now check the
	  context to see if we're running in offline mode and change a
	  parameter accordingly. ........ Merged revisions 407567 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* contrib/ast-db-manage/config/versions/3855ee4e5f85_add_missing_pjsip_options.py
	  (added), /: Add alembic script that adds contact user_agent and
	  endpoint message_context. ........ Merged revisions 411514 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* contrib/ast-db-manage/voicemail/versions/39428242f7f5_increase_recording_column_size.py
	  (added), /,
	  contrib/ast-db-manage/config/versions/43956d550a44_add_tables_for_pjsip.py,
	  contrib/ast-db-manage/config.ini.sample,
	  contrib/ast-db-manage/config/versions/1758e8bbf6b_increase_useragent_column_size.py
	  (added),
	  contrib/ast-db-manage/config/versions/5139253c0423_make_q_member_uniqueid_autoinc.py
	  (added), contrib/ast-db-manage/cdr.ini.sample,
	  contrib/ast-db-manage/voicemail.ini.sample: alembic: Adjust
	  sippeers, queue_members, and voicemail_messages tables. *
	  Increased the sippeers useragent max string size to 255. *
	  Changed the queue_members uniqueid to an auto incremented integer
	  instead of a string. * Increased the voicemail_messages BLOB size
	  to LONGBLOB on mysql. * Fixed the add_tables_for_pjsip config
	  change version downgrade actions to drop a table it created. *
	  Adjusted the sample alembic.ini files cdr.ini.sample,
	  config.ini.sample, and voicemail.ini.sample to give a mysql and
	  postgres sqlalchemy.url lines. ASTERISK-23847 #close Reported by:
	  Stephen More ASTERISK-23825 #close Reported by: Stephen More
	  ASTERISK-23909 #close Reported by: Stephen More Review:
	  https://reviewboard.asterisk.org/r/3870/ ........ Merged
	  revisions 420211 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-06 16:12 +0000 [r420149]  George Joseph <george.joseph@fairview5.com>

	* /, pbx/pbx_lua.c, main/pbx.c: pbx_lua: fix regression with global
	  sym export and context clash by pbx_config. ASTERISK-23818 (lua
	  contexts being overwritten by contexts of the same name in
	  pbx_config) surfaced because pbx_lua, having the
	  AST_MODFLAG_GLOBAL_SYMBOLS set, was always force loaded before
	  pbx_config. Since I couldn't find any reason for pbx_lua to
	  export it's symbols to the rest of Asterisk, I simply changed the
	  flag to AST_MODFLAG_DEFAULT. Problem solved. What I didn't
	  realize was that the symbols need to be exported not because
	  Asterisk needs them but because any external Lua modules like
	  luasql.mysql need the base Lua language APIs exported
	  (ASTERISK-17279). Back to ASTERISK-23818... It looks like there's
	  an issue in pbx.c where context_merge was only merging includes,
	  switches and ignore patterns if the context was already existing
	  AND has extensions, or if the context was brand new. If pbx_lua
	  is loaded before pbx_config, the context will exist BUT pbx_lua,
	  being implemented as a switch, will never place extensions in it,
	  just the switch statement. The result is that when pbx_config
	  loads, it never merges the switch statement created by pbx_lua
	  into the final context. This patch sets pbx_lua's modflag back to
	  AST_MODFLAG_GLOBAL_SYMBOLS and adds an "else if" in context_merge
	  that catches the case where an existing context has includes,
	  switchs or ingore patterns but no actual extensions.
	  ASTERISK-23818 #close Reported by: Dennis Guse Reported by: Timo
	  Teräs Tested by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3891/ ........ Merged
	  revisions 420146 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 420147 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 420148 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-06 15:32 +0000 [r420144]  Walter Doekes <walter+asterisk@wjd.nu>

	* funcs/func_channel.c: Add documentation to the ability to
	  retrieve the source port of a SIP call. (belongs with r419970)
	  ASTERISK-24040 #close Patches: func_channel.c.diff uploaded by
	  dtryba Review: https://reviewboard.asterisk.org/r/3781/

2014-08-06 12:55 +0000 [r420124]  Kinsey Moore <kmoore@digium.com>

	* configs/samples/stasis.conf.sample (added), main/named_acl.c,
	  apps/app_queue.c, main/stasis_bridges.c, main/loader.c,
	  main/stasis.c, apps/app_forkcdr.c, main/stasis_message.c,
	  funcs/func_cdr.c, res/res_corosync.c, res/res_stun_monitor.c,
	  res/res_stasis_test.c, res/res_stasis.c, apps/app_chanspy.c,
	  main/stasis_cache.c, main/pickup.c, main/security_events.c,
	  include/asterisk/stasis.h, main/devicestate.c, main/core_local.c,
	  res/res_stasis_snoop.c, main/endpoints.c, main/presencestate.c,
	  main/cdr.c, main/channel.c, main/stasis_system.c, main/manager.c,
	  main/test.c, main/file.c, main/app.c, pbx/pbx_realtime.c,
	  main/stasis_channels.c, tests/test_stasis.c,
	  res/parking/parking_manager.c, main/stasis_endpoints.c,
	  main/rtp_engine.c, main/ccss.c, main/bridge.c,
	  tests/test_stasis_channels.c: Stasis: Allow message types to be
	  blocked This introduces stasis.conf and a mechanism to prevent
	  certain message types from being published. Internally, this
	  works by preventing the chosen message types from being created
	  which ensures that those message types can never be published.
	  This patch also adjusts message publishers such that message
	  payloads are not created if the related message type is not
	  available. ASTERISK-23943 #close Review:
	  https://reviewboard.asterisk.org/r/3823/

2014-08-05 21:48 +0000 [r420098-420100]  Matthew Jordan <mjordan@digium.com>

	* res/stasis/messaging.c, /: stasis: Fix compilation issue with ao2
	  tagged objects ........ Merged revisions 420099 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/ari/resource_endpoints.c, rest-api/api-docs/events.json, /,
	  channels/chan_sip.c, res/stasis/app.c, res/stasis/messaging.h
	  (added), res/ari/resource_endpoints.h, res/res_pjsip_messaging.c,
	  tests/test_message.c (added), res/res_xmpp.c,
	  include/asterisk/json.h, CHANGES, include/asterisk/manager.h,
	  res/ari/ari_model_validators.c, res/ari/ari_model_validators.h,
	  main/json.c, res/res_ari_endpoints.c, include/asterisk/message.h,
	  res/ari/resource_channels.c, main/message.c, res/res_stasis.c,
	  res/stasis/messaging.c (added), rest-api/api-docs/endpoints.json:
	  Multiple revisions 420089-420090,420097 ........ r420089 |
	  mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines
	  ARI: Add channel technology agnostic out of call text messaging
	  This patch adds the ability to send and receive text messages
	  from various technology stacks in Asterisk through ARI. This
	  includes chan_sip (sip), res_pjsip_messaging (pjsip), and
	  res_xmpp (xmpp). Messages are sent using the endpoints resource,
	  and can be sent directly through that resource, or to a
	  particular endpoint. For example, the following would send the
	  message "Hello there" to PJSIP endpoint alice with a display URI
	  of sip:asterisk@mycooldomain.org:
	  ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There
	  This is equivalent to the following as well:
	  ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There
	  Both forms are available for message technologies that allow for
	  arbitrary destinations, such as chan_sip. Inbound messages can
	  now be received over ARI as well. An ARI application that
	  subscribes to endpoints will receive messages from those
	  endpoints: { "type": "TextMessageReceived", "timestamp":
	  "2014-07-12T22:53:13.494-0500", "endpoint": { "technology":
	  "PJSIP", "resource": "alice", "state": "online", "channel_ids":
	  [] }, "message": { "from": "\"alice\" <sip:alice@127.0.0.1>",
	  "to": "pjsip:asterisk@127.0.0.1", "body": "Watson, come here.",
	  "variables": [] }, "application": "testsuite" } The above was
	  made possible due to some rather major changes in the message
	  core. This includes (but is not limited to): - Users of the
	  message API can now register message handlers. A handler has two
	  callbacks: one to determine if the handler has a destination for
	  the message, and another to handle it. - All dialplan
	  functionality of handling a message was moved into a message
	  handler provided by the message API. - Messages can now have the
	  technology/endpoint associated with them. Various other
	  properties are also now more easily accessible. - A number of ao2
	  containers that weren't really needed were replaced with vectors.
	  Iteration over ao2_containers is expensive and pointless when the
	  lifetime of things is well defined and the number of things is
	  very small. res_stasis now has a new file that makes up its
	  structure, messaging. The messaging functionality implements a
	  message handler, and passes received messages that match an
	  interested endpoint over to the app for processing. Note that
	  inadvertently while testing this, I reproduced ASTERISK-23969.
	  res_pjsip_messaging was incorrectly parsing out the 'to' field,
	  such that arbitrary SIP URIs mangled the endpoint lookup. This
	  patch includes the fix for that as well. Review:
	  https://reviewboard.asterisk.org/r/3726 ASTERISK-23692 #close
	  Reported by: Matt Jordan ASTERISK-23969 #close Reported by:
	  Andrew Nagy ........ r420090 | mjordan | 2014-08-05 15:16:37
	  -0500 (Tue, 05 Aug 2014) | 2 lines Remove automerge properties
	  :-( ........ r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue,
	  05 Aug 2014) | 2 lines test_message: Fix strict-aliasing
	  compilation issue ........ Merged revisions 420089-420090,420097
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-05 13:59 +0000 [r420028]  Jonathan Rose <jrose@digium.com>

	* main/format.c: chan_iax2: Fix a crash that occurs when using
	  allow=all for an IAX2 peer Or any combination of codecs that
	  includes Opus. ASTERISK-24107 #close Review:
	  https://reviewboard.asterisk.org/r/3885/

2014-08-04 21:00 +0000 [r420007]  Richard Mudgett <rmudgett@digium.com>

	* main/format_cache.c, include/asterisk/format_cache.h: Remove
	  duplicate definitions of ast_format_vp8.

2014-08-04 20:25 +0000 [r419970]  Mark Michelson <mmichelson@digium.com>

	* channels/sip/dialplan_functions.c: Add the ability to retrieve
	  the source port of a SIP call. This adds the ability to call
	  CHANNEL(recvport) on chan_sip channels to see the port on which
	  an INVITE was received. ASTERISK-24040 #close Reported by dtryba
	  Patches: dialplan_functions.patch uploaded by dtryba (License
	  #6628) Review: https://reviewboard.asterisk.org/r/3781

2014-08-04 19:47 +0000 [r419945]  Rusty Newton <rnewton@digium.com>

	* main/manager.c, /: Manager - Improve documentation for manager
	  commands Getvar and Setvar. The documentation for these commands
	  did not make it clear that they could accept expressions and
	  functions. Modified to make this clear, but tried not to be
	  overly explicit. ASTERISK-21178 #close Reported by: Rusty Newton
	  Tested by: Rusty Newton Review:
	  https://reviewboard.asterisk.org/r/3854 ........ Merged revisions
	  419942 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 419943 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 419944 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-08-02 03:37 +0000 [r419914]  Kinsey Moore <kmoore@digium.com>

	* res/res_pjsip.c: Manager: Add PJSIPShowEndpoint[s] documentation
	  This adds a large swath of response documentation for
	  PJSIPShowEndpoint and PJSIPShowEndpoints AMI commands. It relies
	  heavily on the existing text in the configInfo documentation via
	  xi:include tags to avoid documentation duplication. Review:
	  https://reviewboard.asterisk.org/r/3888/

2014-08-01 14:48 +0000 [r419888]  Mark Michelson <mmichelson@digium.com>

	* CHANGES, res/res_pjsip/pjsip_options.c: Add ContactStatusDetail
	  to PJSIPShowEndpoint AMI output. Now when running
	  PJSIPShowEndpoint, you will receive a ContactStatusDetail for
	  each bound contact that Asterisk is qualifying. This information
	  includes the URI of the contact, current reachability, and
	  roundtrip time. AFS-91 #close Reported by Mark Michelson Review:
	  https://reviewboard.asterisk.org/r/3797

2014-07-31 16:19 +0000 [r419851]  Jonathan Rose <jrose@digium.com>

	* CHANGES, res/res_pjsip_notify.c: PJSIP: Send Notify AMI and CLI
	  commands can now send to URI instead of endpoint Review:
	  https://reviewboard.asterisk.org/r/3817/

2014-07-31 11:57 +0000 [r419822-419825]  Matthew Jordan <mjordan@digium.com>

	* main/rtp_engine.c, /, res/res_hep_rtcp.c (added), CHANGES,
	  channels/chan_pjsip.c, res/res_rtp_asterisk.c: res_hep_rtcp: Add
	  module that sends RTCP information to a Homer Server This patch
	  adds a new module to Asterisk, res_hep_rtcp. The module
	  subscribes to the RTCP topics in Stasis and receives RTCP
	  information back from the message bus. It encodes into HEPv3
	  packets and sends the information to the res_hep module for
	  transmission. Using this, someone with a Homer server can get
	  live call quality monitoring for all RTP-based channels in their
	  Asterisk 12+ systems. In addition, there were a few bugs in the
	  RTP engine, res_rtp_asterisk, and chan_pjsip that were uncovered
	  by the tests written for the Asterisk Test Suite. This patch
	  fixes the following: 1) chan_pjsip failed to set its channel
	  unique ids on its RTP instance on outbound calls. It now does
	  this in the appropriate location, in the serialized call
	  callback. 2) The rtp_engine was overflowing some values when
	  packed into JSON. Specifically, some longs and unsigned ints
	  can't be be packed into integer values, for obvious reasons.
	  Since libjansson only supports integers, floats, strings,
	  booleans, and objects, we print these values into strings. 3)
	  res_rtp_asterisk had a few problems: (a) it would emit a source
	  IP address of 0.0.0.0 if bound to that IP address. We now use
	  ast_find_ourip to get a better IP address, and properly marshal
	  the result into an ast_strdupa'd string. (b) Reports can be
	  generated with no report bodies. In particular, this occurs when
	  a sender is transmitting information to a receiver (who will send
	  no RTP back to the sender). As such, the sender has no report
	  body for what it received. We now properly handle this case, and
	  the sender will emit SR reports with no body. Likewise, if we
	  receive an RTCP packet with no report body, we will still
	  generate the appropriate events. ASTERISK-24119 #close ........
	  Merged revisions 419823 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* funcs/func_jitterbuffer.c, doc/appdocsxml.dtd, main/xmldoc.c:
	  xmldocs: Add support for an <example> tag in the Asterisk XML
	  Documentation This patch adds support for an <example /> tag in
	  the XML documentation schema. For CLI help, this doesn't change
	  the formatting too much: - Preceeding white space is removed -
	  Unlike with para elements, new lines are preserved However,
	  having an <example /> tag in the XML schema allows for the wiki
	  documentation generation script to surround the documentation
	  with {code} or {noformat} tags, generating much better content
	  for the wiki - and allowing us to put dialplan examples (and
	  other code snippets, if desired) into the documentation for an
	  application/function/AMI command/etc. Review:
	  https://reviewboard.asterisk.org/r/3807/

2014-07-30 18:32 +0000 [r419806]  Kinsey Moore <kmoore@digium.com>

	* main/manager.c, res/res_manager_presencestate.c,
	  res/res_manager_devicestate.c, main/pbx.c: manager: Add state
	  list commands This patch adds three new AMI commands: *
	  ExtensionStateList (pbx.c) - list all known extension state hints
	  and their current statuses. Events emitted by the list action are
	  equivalent to the ExtensionStatus events. * PresenceStateList
	  (res_manager_presencestate) - list all known presence state
	  values. Events emitted are generated by the stasis message type,
	  and hence are PresenceStateChange events. * DeviceStateList
	  (res_manager_devicestate) - list all known device state values.
	  Events emitted are generated by the stasis message type, and
	  hence are DeviceStateChange events. Patch-by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3799/

2014-07-29 19:41 +0000 [r419789]  Mark Michelson <mmichelson@digium.com>

	* main/manager.c: Do not omit the first header of a UserEvent AMI
	  action from the corresponding emitted UserEvent. ASTERISK-24124
	  #close Reported by Matt Jordan AFS-131 #close Reported by Matt
	  Jordan Patches: userevent.patch uploaded by Matt Jordan (License
	  #6283)

2014-07-29 10:56 +0000 [r419751-419766]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_session.c, /: res_pjsip_session: Fix race condition
	  where redirecting information may not be set. Since the PJSIP
	  INVITE session module is invoked before any session supplements
	  it was possible for it to handle a redirect before the
	  res_pjsip_diversion module interpreted and set redirecting
	  information on the channel. This would cause the redirecting
	  information to get lost. This patch ensures that session
	  supplements are *always* invoked before a redirect occurs by
	  explicitly calling them in the redirect handler. Review:
	  https://reviewboard.asterisk.org/r/3850/ ........ Merged
	  revisions 419764 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_xpidf_body_generator.c,
	  res/res_pjsip_pidf_body_generator.c:
	  res_pjsip_pidf_body_generator / res_pjsip_xpidf_body_generator:
	  Ensure local entity is unquoted. The local entity as provided by
	  PJSIP is quoted within '<' and '>'. As a result placing this
	  value into XML will result in malformed XML being produced. This
	  patch now unquotes the local entity so it can go safely into the
	  XML. Review: https://reviewboard.asterisk.org/r/3851/ ........
	  Merged revisions 419750 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-28 18:58 +0000 [r419688]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_speech_utils.c, main/channel.c, /,
	  funcs/func_frame_trace.c, main/abstract_jb.c: datastores: Audit
	  ast_channel_datastore_remove usage. Audit of v1.8 usage of
	  ast_channel_datastore_remove() for datastore memory leaks. *
	  Fixed leaks in app_speech_utils and func_frame_trace. * Fixed
	  app_speech_utils not locking the channel when accessing the
	  channel datastore list. Review:
	  https://reviewboard.asterisk.org/r/3859/ Audit of v11 usage of
	  ast_channel_datastore_remove() for datastore memory leaks. *
	  Fixed leak in func_jitterbuffer. (Was not in v12) Review:
	  https://reviewboard.asterisk.org/r/3860/ Audit of v12 usage of
	  ast_channel_datastore_remove() for datastore memory leaks. *
	  Fixed leaks in abstract_jb. * Fixed leak in
	  ast_channel_unsuppress(). Used by ARI mute control and
	  res_mutestream. * Fixed ref leak in ast_channel_suppress(). Used
	  by ARI mute control and res_mutestream. Review:
	  https://reviewboard.asterisk.org/r/3861/ ........ Merged
	  revisions 419684 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 419685 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 419686 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-25 18:09 +0000 [r419612]  Joshua Colp <jcolp@digium.com>

	* main/loader.c: loader: Fix an infinite loop when printing modules
	  using "module show". When creating the alphabetical sorted list
	  each module is added to a list temporarily. On the second
	  iteration each module already has a pointer to another module,
	  causing stuff to go into a loop. ASTERISK-24123 #close Reported
	  by: Malcolm Davenport

2014-07-25 16:47 +0000 [r419592]  Mark Michelson <mmichelson@digium.com>

	* res/res_ari_sounds.c, res/res_stasis.c, res/res_fax_spandsp.c,
	  res/res_timing_kqueue.c, res/res_odbc.c,
	  res/res_pjsip_transport_websocket.c, apps/app_voicemail.c,
	  res/res_calendar.c, channels/chan_unistim.c, cel/cel_radius.c,
	  channels/chan_multicast_rtp.c, res/res_pjsip_notify.c,
	  res/res_snmp.c, formats/format_sln.c, apps/app_meetme.c,
	  apps/app_dictate.c, codecs/codec_gsm.c, res/res_stasis_snoop.c,
	  res/res_musiconhold.c, res/res_format_attr_h264.c,
	  res/res_http_websocket.c, apps/app_followme.c,
	  res/res_config_sqlite.c, formats/format_siren7.c, cdr/cdr_csv.c,
	  formats/format_ilbc.c, channels/chan_phone.c,
	  apps/app_setcallerid.c, apps/app_osplookup.c, cel/cel_custom.c,
	  apps/app_mp3.c, res/res_agi.c, channels/chan_motif.c,
	  res/res_timing_timerfd.c, apps/app_confbridge.c,
	  res/res_format_attr_silk.c, formats/format_siren14.c,
	  res/res_sorcery_realtime.c, channels/chan_mgcp.c,
	  apps/app_jack.c, codecs/codec_lpc10.c,
	  res/res_pjsip_pidf_body_generator.c, res/res_config_pgsql.c,
	  funcs/func_dialplan.c, apps/app_nbscat.c, cdr/cdr_syslog.c,
	  res/res_pjsip_authenticator_digest.c, apps/app_festival.c,
	  res/res_fax.c, apps/app_waitforsilence.c, res/res_adsi.c,
	  res/res_crypto.c, res/res_ari_applications.c,
	  res/res_hep_pjsip.c, pbx/pbx_lua.c, res/res_pjsip_messaging.c,
	  res/res_pjsip_caller_id.c, channels/chan_console.c,
	  apps/app_getcpeid.c, res/res_stasis_answer.c,
	  channels/chan_oss.c, res/res_pjsip_nat.c,
	  res/res_pjsip_session.c, cdr/cdr_tds.c,
	  res/res_pjsip_header_funcs.c, res/res_parking.c,
	  formats/format_vox.c, res/res_pjsip_rfc3326.c,
	  res/res_ari_endpoints.c, res/res_stun_monitor.c,
	  res/res_pjsip_mwi.c, res/res_stasis_recording.c,
	  res/res_pjsip_xpidf_body_generator.c, apps/app_sms.c,
	  codecs/codec_ulaw.c, channels/chan_nbs.c, apps/app_stack.c,
	  channels/chan_pjsip.c, formats/format_g729.c, cel/cel_pgsql.c,
	  res/res_sorcery_config.c, res/res_ari.c, addons/chan_ooh323.c,
	  cdr/cdr_sqlite3_custom.c, codecs/codec_adpcm.c,
	  res/res_ari_asterisk.c, res/res_calendar_caldav.c,
	  apps/app_image.c, apps/app_ices.c, formats/format_wav_gsm.c,
	  main/cli.c, res/res_format_attr_celt.c, res/res_rtp_multicast.c,
	  channels/chan_dahdi.c, funcs/func_pitchshift.c, res/res_smdi.c,
	  res/res_pjsip_one_touch_record_info.c, pbx/pbx_ael.c,
	  pbx/pbx_realtime.c, apps/app_amd.c, channels/chan_alsa.c,
	  formats/format_h263.c, apps/app_url.c, res/res_pjsip_acl.c,
	  apps/app_externalivr.c, res/res_curl.c, formats/format_gsm.c,
	  res/res_speech.c, cdr/cdr_manager.c, res/res_calendar_exchange.c,
	  codecs/codec_g722.c, res/res_pjsip_multihomed.c,
	  res/res_ari_mailboxes.c, cel/cel_tds.c, res/res_sorcery_memory.c,
	  apps/app_fax.c, codecs/codec_speex.c, res/res_pjsip_sdp_rtp.c,
	  codecs/codec_g726.c, formats/format_ogg_vorbis.c,
	  apps/app_talkdetect.c, res/res_ari_channels.c,
	  res/res_pjsip_exten_state.c, apps/app_speech_utils.c,
	  apps/app_agent_pool.c, apps/app_waitforring.c, res/res_statsd.c,
	  addons/cdr_mysql.c, formats/format_g726.c, res/res_ari_bridges.c,
	  addons/app_mysql.c, res/res_stasis_playback.c,
	  addons/format_mp3.c, res/res_pjsip_endpoint_identifier_ip.c,
	  res/res_phoneprov.c, res/res_pjsip_t38.c,
	  res/res_pjsip_registrar_expire.c, cdr/cdr_pgsql.c,
	  cdr/cdr_radius.c, res/res_chan_stats.c,
	  res/res_format_attr_opus.c, res/res_config_odbc.c,
	  funcs/func_audiohookinherit.c,
	  res/res_pjsip_outbound_registration.c, cel/cel_manager.c,
	  funcs/func_odbc.c, res/res_pjsip_endpoint_identifier_anonymous.c,
	  funcs/func_frame_trace.c, funcs/func_aes.c, cdr/cdr_sqlite.c,
	  apps/app_minivm.c, res/res_pjsip_log_forwarder.c,
	  formats/format_h264.c, res/res_config_ldap.c, apps/app_ivrdemo.c,
	  addons/chan_mobile.c, apps/app_stasis.c,
	  res/res_pjsip_diversion.c, cdr/cdr_custom.c, apps/app_adsiprog.c,
	  res/res_pjsip_dtmf_info.c, res/res_rtp_asterisk.c,
	  res/res_calendar_icalendar.c, res/res_hep.c, channels/chan_sip.c,
	  channels/chan_bridge_media.c, codecs/codec_alaw.c,
	  apps/app_queue.c, res/res_srtp.c, funcs/func_presencestate.c,
	  res/res_timing_pthread.c, res/res_manager_presencestate.c,
	  res/res_corosync.c, apps/app_celgenuserevent.c,
	  cel/cel_sqlite3_custom.c, res/snmp/agent.c, pbx/pbx_dundi.c,
	  formats/format_g723.c, funcs/func_devstate.c,
	  res/res_pjsip_registrar.c,
	  res/res_pjsip_pidf_eyebeam_body_supplement.c,
	  addons/res_config_mysql.c,
	  res/res_pjsip_pidf_digium_body_supplement.c, apps/app_test.c,
	  res/res_timing_dahdi.c, cdr/cdr_adaptive_odbc.c,
	  apps/app_alarmreceiver.c, apps/app_chanisavail.c,
	  res/res_format_attr_h263.c, res/res_pjsip_mwi_body_generator.c,
	  res/res_xmpp.c, res/res_http_post.c, channels/chan_iax2.c,
	  res/res_pjsip_endpoint_identifier_user.c, res/res_pjsip.c,
	  res/res_pktccops.c, res/res_pjsip_send_to_voicemail.c,
	  main/loader.c, cel/cel_odbc.c, res/res_ari_model.c,
	  channels/chan_skinny.c,
	  res/res_pjsip_outbound_authenticator_digest.c,
	  res/res_mwi_external.c, apps/app_skel.c, formats/format_pcm.c,
	  include/asterisk/module.h, res/res_pjsip_path.c,
	  res/res_ari_playbacks.c, res/res_pjsip_pubsub.c, cdr/cdr_odbc.c,
	  funcs/func_periodic_hook.c, res/res_stasis_test.c,
	  formats/format_jpeg.c, res/res_pjsip_refer.c,
	  formats/format_g719.c, res/res_clialiases.c,
	  res/res_config_sqlite3.c, res/res_ari_device_states.c,
	  formats/format_wav.c, apps/app_saycounted.c, apps/app_dahdiras.c,
	  apps/app_morsecode.c, res/res_stasis_mailbox.c,
	  res/res_ael_share.c, res/res_mwi_external_ami.c,
	  res/res_pjsip_logger.c, res/res_stasis_device_state.c,
	  res/res_calendar_ews.c, res/res_monitor.c, apps/app_playback.c,
	  res/res_ari_recordings.c, res/res_manager_devicestate.c,
	  res/res_config_curl.c, channels/chan_misdn.c, funcs/func_curl.c,
	  res/res_ari_events.c, res/res_pjsip_dialog_info_body_generator.c,
	  res/res_sorcery_astdb.c, codecs/codec_dahdi.c,
	  apps/app_zapateller.c, pbx/pbx_config.c: Add module support level
	  to ast_module_info structure. Print it in CLI "module show" .
	  ASTERISK-23919 #close Reported by Malcolm Davenport Review:
	  https://reviewboard.asterisk.org/r/3802

2014-07-25 14:47 +0000 [r419563-419567]  Matthew Jordan <mjordan@digium.com>

	* CHANGES, res/ari/ari_model_validators.c,
	  rest-api/api-docs/recordings.json,
	  res/ari/ari_model_validators.h, /, res/res_stasis_recording.c:
	  Multiple revisions 419565-419566 ........ r419565 | mjordan |
	  2014-07-25 09:41:23 -0500 (Fri, 25 Jul 2014) | 21 lines ARI:
	  report duration values in LiveRecording objects This patch adds
	  three new fields to the LiveRecording model: - total_duration:
	  the total length of the live recording - talking_duration:
	  optional. The duration of talking energy that was detected while
	  the recording was made. - silence_duration: optional. The
	  duration of silence that was detected while the recording was
	  made. These values are reported in the RecordingFinished ARI
	  event. When a DSP is enabled on the channel during the recording
	  - which occurs when the recording is created with
	  max_silence_seconds (indicating that the user actually cares
	  about how much silence is in the file), we will report the
	  talking_duration and silence_duration in addition to the
	  total_duration. Review: https://reviewboard.asterisk.org/r/3770/
	  ASTERISK-24037 #close Reported by: Samuel Galarneau ........
	  r419566 | mjordan | 2014-07-25 09:46:15 -0500 (Fri, 25 Jul 2014)
	  | 1 line Update CHANGES for r419565 ........ Merged revisions
	  419565-419566 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/loader.c, res/res_calendar.c: module loader: Unload modules
	  in reverse order of their start order When Asterisk starts a
	  module (calling its load_module function), it re-orders the
	  module list, sorting it alphabetically. Ostensibly, this was done
	  so that the output of 'module show' listed modules in alphabetic
	  order. This had the unfortunate side effect of making modules
	  with complex usage patterns unloadable. A module that has a large
	  number of modules that depend on it is typically abandoned during
	  the unloading process. This results in its memory not being
	  reclaimed during exit. Generally, this isn't harmful - when the
	  process is destroyed, the operating system will reclaim all
	  memory allocated by the process. Prior to Asterisk 12, we also
	  didn't have many modules with complex dependencies. However, with
	  the advent of ARI and PJSIP, this can make make unloading those
	  modules successfully nearly impossible, and thus tracking memory
	  leaks or ref debug leaks a real pain. While this patch is not a
	  complete overhaul of the module loader - such an effort would be
	  beyond the scope of what could be done for Asterisk 13 - this
	  does make some marginal improvements to the loader such that
	  modules like res_pjsip or res_stasis *may* be made properly
	  un-loadable in the future. 1. The linked list of modules has been
	  replaced with a doubly linked list. This allows traversal of the
	  module list to occur backwards. The module shutdown routine now
	  walks the global list backwards when it attempts to unload
	  modules. 2. The alphabetic reorganization of the module list on
	  startup has been removed. Instead, a started module is placed at
	  the end of the module list. 3. The ast_update_module_list
	  function - which is used by the CLI to display the modules - now
	  does the sorting alphabetically itself. It creates its own linked
	  list and inserts the modules into it in alphabetic order. This
	  allows for the intent of the previous code to be maintained. This
	  patch also contains a fix for res_calendar. Without
	  calendar.conf, the calendar modules were improperly bumping the
	  use count of res_calendar, then failing to load themselves. This
	  patch makes it so that we detect whether or not calendaring is
	  enabled before altering the use count. Review:
	  https://reviewboard.asterisk.org/r/3777/

2014-07-25 10:54 +0000 [r419537-419539]  Joshua Colp <jcolp@digium.com>

	* apps/app_bridgewait.c, /: app_bridgewait: Remove possibility of
	  race condition between channels leaving/joining. Bridges created
	  by app_bridgewait previously had the "dissolve when empty" flag
	  set. This caused the bridge core to destroy them when the last
	  channel had left. This introduced a race condition where we may
	  have a reference to the bridge but it is not actually joinable
	  when we try to join it. This flag has now been removed and the
	  bridge is guaranteed to be joinable at all times. ASTERISK-23987
	  #close Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3836/ ........ Merged
	  revisions 419538 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/bridge.c: bridge: Make "bridge destroy" only available in
	  developer mode and add "all" to "bridge kick". The "bridge
	  destroy" CLI command is invasive to bridges and can leave them in
	  an unexpected state for the users of them. Since this command may
	  be useful for developers it is now only available when developer
	  mode is available. To take its place "all" has been added as a
	  valid option to the "bridge kick" CLI command. It will kick all
	  of the channels in the bridge out. ASTERISK-23987 Reported by:
	  Matt Jordan Review: https://reviewboard.asterisk.org/r/3840/
	  ........ Merged revisions 419536 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-24 22:48 +0000 [r419520]  Richard Mudgett <rmudgett@digium.com>

	* main/bridge.c, main/bridge_basic.c, main/core_unreal.c,
	  UPGRADE.txt, include/asterisk/channel.h, CHANGES,
	  apps/app_followme.c, apps/app_queue.c, main/cel.c,
	  res/parking/parking_bridge_features.c, apps/app_dial.c,
	  main/channel.c, main/dial.c, main/pbx.c: accountcode: Slightly
	  change accountcode propagation. The previous behavior was to
	  simply set the accountcode of an outgoing channel to the
	  accountcode of the channel initiating the call. It was done this
	  way a long time ago to allow the accountcode set on the SIP/100
	  channel to be propagated to a local channel so the dialplan
	  execution on the Local;2 channel would have the SIP/100
	  accountcode available. SIP/100 -> Local;1/Local;2 -> SIP/200
	  Propagating the SIP/100 accountcode to the local channels is very
	  useful. Without any dialplan manipulation, all channels in this
	  call would have the same accountcode. Using dialplan, you can set
	  a different accountcode on the SIP/200 channel either by setting
	  the accountcode on the Local;2 channel or by the Dial
	  application's b(pre-dial), M(macro) or U(gosub) options, or by
	  the FollowMe application's b(pre-dial) option, or by the Queue
	  application's macro or gosub options. Before Asterisk v12, the
	  altered accountcode on SIP/200 will remain until the local
	  channels optimize out and the accountcode would change to the
	  SIP/100 accountcode. Asterisk v1.8 attempted to add peeraccount
	  support but ultimately had to punt on the support. The
	  peeraccount support was rendered useless because of how the CDR
	  code needed to unconditionally force the caller's accountcode
	  onto the peer channel's accountcode. The CEL events were thus
	  intentionally made to always use the channel's accountcode as the
	  peeraccount value. With the arrival of Asterisk v12, the
	  situation has improved somewhat so peeraccount support can be
	  made to work. Using the indicated example, the the accountcode
	  values become as follows when the peeraccount is set on SIP/100
	  before calling SIP/200: SIP/100 ---> Local;1 ---- Local;2 --->
	  SIP/200 acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200 peer:
	  200 /\ peer: 100 /\ peer: 200 /\ peer: 100 If a channel already
	  has an accountcode it can only change by the following explicit
	  user actions: 1) A channel originate method that can specify an
	  accountcode to use. 2) The calling channel propagating its
	  non-empty peeraccount or its non-empty accountcode if the
	  peeraccount was empty to the outgoing channel's accountcode
	  before initiating the dial. e.g., Dial and FollowMe. The
	  exception to this propagation method is Queue. Queue will only
	  propagate peeraccounts this way only if the outgoing channel does
	  not have an accountcode. 3) Dialplan using CHANNEL(accountcode).
	  4) Dialplan using CHANNEL(peeraccount) on the other end of a
	  local channel pair. If a channel does not have an accountcode it
	  can get one from the following places: 1) The channel driver's
	  configuration at channel creation. 2) Explicit user action as
	  already indicated. 3) Entering a basic or stasis-mixing bridge
	  from a peer channel's peeraccount value. You can specify the
	  accountcode for an outgoing channel by setting the
	  CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
	  applications. Queue adds the wrinkle that it will not overwrite
	  an existing accountcode on the outgoing channel with the calling
	  channels values. Accountcode and peeraccount values propagate to
	  an outgoing channel before dialing. Accountcodes also propagate
	  when channels enter or leave a basic or stasis-mixing bridge. The
	  peeraccount value only makes sense for mixing bridges with two
	  channels; it is meaningless otherwise. * Made peeraccount
	  functional by changing accountcode propagation as described
	  above. * Fixed CEL extracting the wrong ie value for the
	  peeraccount. This was done intentionally in Asterisk v1.8 when
	  that version had to punt on peeraccount. * Fixed a few places
	  dealing with accountcodes that were reading from channels without
	  the lock held. AFS-65 #close Review:
	  https://reviewboard.asterisk.org/r/3601/

2014-07-24 21:01 +0000 [r419504]  Michael L. Young <elgueromexicano@gmail.com>

	* main/db.c, include/asterisk/astdb.h: core/db: Revert Patch Added
	  In Attempt To Improve I/O Performance Reverting the patch since
	  it was causing a regression and after fixing the regression,
	  there were no performance gains. At least based on my method for
	  measurement. ASTERISK-24050 Review:
	  https://reviewboard.asterisk.org/r/3841/

2014-07-24 17:50 +0000 [r419438-419439]  Corey Farrell <git@cfware.com>

	* include/asterisk/astobj.h: Deprecate astobj.h This flags astobj.h
	  as deprecated, warns people to use astobj2.h instead. Only
	  netsock.c (also deprecated) still uses astobj.h. ASTERISK-24069
	  #close Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3818/

	* channels/sip/include/sip.h, channels/chan_sip.c: chan_sip:
	  complete upgrade to ao2 This change upgrades sip_registry and
	  sip_subscription_mwi to astobj2. ASTERISK-24067 #close Reported
	  by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3759/

2014-07-24 16:52 +0000 [r419377]  Jason Parker <jparker@digium.com>

	* addons/chan_ooh323.c, /: Don't cause Asterisk to exit if
	  ooh323.conf not found. (closes issue ASTERISK-23814) ........
	  Merged revisions 419374 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 419375 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 419376 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-24 15:20 +0000 [r419358]  Matthew Jordan <mjordan@digium.com>

	* main/devicestate.c, channels/chan_pjsip.c: device state: Update
	  the core to report ONHOLD if a channel is on hold In Asterisk, it
	  is possible for a device to have a status of ONHOLD. This is not
	  typically an easy thing to determine, as a channel being on hold
	  is not a direct channel state. Typically, this has to be
	  calculated outside of the core independently in channel drivers,
	  notably, chan_sip and chan_pjsip. Both of these channel drivers
	  already have to calculate device state in a fashion more complex
	  than the core can handle, as they aggregate all state of all
	  channels associated with a peer/endpoint; they also independently
	  track whether or not one of those channels is currently on hold
	  and mark the device state appropriately. In 12+, we now have the
	  ability to report an AST_DEVICE_ONHOLD state for all channels
	  that defer their device state to the core. This is due to channel
	  hold state actually now being tracked on the channel itself. If a
	  channel driver defers its device state to the core (which many,
	  such as DAHDI, IAX2, and others do in most situations), the
	  device state core already goes out to get a channel associated
	  with the device. As such, it can now also factor the channel hold
	  state in its calculation. This patch adds this logic to the
	  device state core. It also uses an existing mapping between
	  device state and channel state to handle more channel states.
	  chan_pjsip has been updated slightly as well to make use of this
	  (as it was, for some reason, reporting a channel state of BUSY as
	  a device state of INUSE, which feels slightly wrong). Review:
	  https://reviewboard.asterisk.org/r/3771/ ASTERISK-24038 #close

2014-07-24 13:00 +0000 [r419342]  Kinsey Moore <kmoore@digium.com>

	* include/asterisk/manager.h, doc/appdocsxml.dtd, main/xmldoc.c,
	  main/manager_bridges.c, main/manager.c,
	  include/asterisk/xmldoc.h, main/config_options.c: AMI: Allow for
	  command response documentation Allow for responses to AMI
	  actions/commands to be documented properly in XML and displayed
	  via the CLI. Response events are documented exactly as standard
	  AMI events are documented. Review:
	  https://reviewboard.asterisk.org/r/3812/

2014-07-23 16:46 +0000 [r419319]  Matthew Jordan <mjordan@digium.com>

	* main/endpoints.c, tests/test_stasis_endpoints.c, /: endpoints:
	  Fix failing unit tests from r419196 This patch does two things:
	  (1) It updates the unit tests to expect additional stasis
	  messages. More messages are now sent to the endpoint topic, due
	  to forwarding all channel messages and the forwarding
	  relationship set up between endpoints themselves. (2) Remove the
	  technology forwarding subscription during ast_endpoint_shutdown.
	  This prevents an improper double shutdown of an endpoint from
	  occurring. ........ Merged revisions 419318 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-23 14:00 +0000 [r419286]  Scott Griepentrog <sgriepentrog@digium.com>

	* apps/app_voicemail.c, /: app_voicemail: use a consistent
	  generator string When updating voicemail.conf when a user changes
	  their pin, change the generator string to be the same as the
	  module name when reading so that the same config_hook will be
	  called. Review: https://reviewboard.asterisk.org/r/3837/ ........
	  Merged revisions 419284 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 419285 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-23 01:28 +0000 [r419268]  Corey Farrell <git@cfware.com>

	* main/manager.c, res/res_fax.c: res_fax: unregister manager
	  actions on unload * Unregister manager actions FAXSessions,
	  FAXSession and FAXStats at unload. * Update ast_manager_register2
	  use ao2_t_alloc tagged with the action name. ASTERISK-24058
	  #close Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3831/

2014-07-22 20:22 +0000 [r419222-419252]  Michael L. Young <elgueromexicano@gmail.com>

	* CHANGES, main/bridge_channel.c: core/bridge_channel: Substitute
	  Variables In Features Application Map Say you wanted to include
	  variables in an application map and have those variables
	  substituted and passed along to the application being executed;
	  currently this does not happen. This patch adds this ability to
	  pass channel variable values to an application before being
	  executed. ASTERISK-22608 #close Reported by: Michael L. Young
	  patches: features_substitute_arguments_v2.diff uploaded by
	  Michael L. Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/3819/

	* CHANGES, apps/app_mixmonitor.c: apps/app_mixmonitor: Add Options
	  To Play Beep At Start Or Stop We have a new periodic beep feature
	  but sometimes a user needs some sort of feedback, without the
	  need to have a periodic beep during the recording, to let them
	  know that MixMonitor started recording or ended the recording.
	  The use case where this patch is being used is when using Dynamic
	  Features to start and end MixMonitor. This patch adds an option
	  to play a beep when MixMonitor starts and an option to play a
	  beep when MixMonitor ends. ASTERISK-24051 #close Reported by:
	  Michael L. Young patches: mixmonitor-play-beep-start-stop.diff
	  uploaded by Michael L. Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/3820/

	* main/db.c, include/asterisk/astdb.h: core/db: Improve I/O When
	  Updating Rows When updating a row, we are currently doing an
	  INSERT OR REPLACE INTO. The downside to this is that the row is
	  deleted if it exists and then a new row is inserted. So, we are
	  hitting the disk twice. One for the deletion and one for the
	  insertion. This patch changes this statement to an INSERT INTO
	  and if the insert fails because a row with that key exists, we
	  will IGNORE the failure. Then we will attempt to perform an
	  UPDATE on the existing row if that row wasn't just INSERTed.
	  ASTERISK-24050 #close Reported by: Michael L. Young patches:
	  astdb-insert-update-io-help_trunk_v2.diff uploaded by Michael L.
	  Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/3815/

2014-07-22 17:10 +0000 [r419206]  Richard Mudgett <rmudgett@digium.com>

	* codecs/codec_speex.c: codec_speex: Fix trashing normal static
	  frame for AST_FRAME_CNG. Made use a local static frame to
	  generate the AST_FRAME_CNG frame when silence starts. I don't
	  think the handling of the AST_FRAME_CNG has ever really worked
	  because there doesn't seem to be any consumers of it. Review:
	  https://reviewboard.asterisk.org/r/3813/

2014-07-22 16:20 +0000 [r419203]  Matthew Jordan <mjordan@digium.com>

	* include/asterisk/endpoints.h,
	  rest-api/api-docs/applications.json, include/asterisk/xmpp.h,
	  main/channel_internal_api.c, channels/chan_motif.c,
	  include/asterisk/channel.h, res/ari/resource_applications.h,
	  res/res_xmpp.c, channels/chan_iax2.c, main/endpoints.c,
	  channels/chan_pjsip.c, main/channel.c,
	  res/ari/resource_endpoints.c, /, channels/chan_sip.c: ARI: Fix
	  endpoint/channel subscription issues; allow for subscriptions to
	  tech This patch serves two purposes: (1) It fixes some bugs with
	  endpoint subscriptions not reporting all of the channel events
	  (2) It serves as the preliminary work needed for ASTERISK-23692,
	  which allows for sending/receiving arbitrary out of call text
	  messages through ARI in a technology agnostic fashion. The
	  messaging functionality described on ASTERISK-23692 requires two
	  things: (1) The ability to send/receive messages associated with
	  an endpoint. This is relatively straight forwards with the
	  endpoint core in Asterisk now. (2) The ability to send/receive
	  messages associated with a technology and an arbitrary technology
	  defined URI. This is less straight forward, as endpoints are
	  formed from a tech + resource pair. We don't have a mechanism to
	  note that a technology that *may* have endpoints exists. This
	  patch provides such a mechanism, and fixes a few bugs along the
	  way. The first major bug this patch fixes is the forwarding of
	  channel messages to their respective endpoints. Prior to this
	  patch, there were two problems: (1) Channel caching messages
	  weren't forwarded. Thus, the endpoints missed most of the
	  interesting bits (such as channel creation, destruction, state
	  changes, etc.) (2) Channels weren't associated with their
	  endpoint until after creation. This resulted in endpoints missing
	  the channel creation message, which limited the usefulness of the
	  subscription in the first place (a major use case being 'tell me
	  when this endpoint has a channel'). Unfortunately, this meant
	  another parameter to ast_channel_alloc. Since not all channel
	  technologies support an ast_endpoint, this patch makes such a
	  call optional and opts for a new function,
	  ast_channel_alloc_with_endpoint. When endpoints are created, they
	  will implicitly create a technology endpoint for their technology
	  (if one does not already exist). A technology endpoint is special
	  in that it has no state, cannot have channels created for it,
	  cannot be created explicitly, and cannot be destroyed except on
	  shutdown. It does, however, have all messages from other
	  endpoints in its technology forwarded to it. Combined with the
	  bug fixes, we now have Stasis messages being properly forwarded.
	  Consider the following scenario: two PJSIP endpoints (foo and
	  bar), where bar has a single channel associated with it and foo
	  has two channels associated with it. The messages would be
	  forwarded as follows: channel PJSIP/foo-1 -- \ --> endpoint
	  PJSIP/foo -- / \ channel PJSIP/foo-2 -- \ ---- > endpoint PJSIP /
	  channel PJSIP/bar-1 -----> endpoint PJSIP/bar -- ARI, through the
	  applications resource, can: - subscribe to endpoint:PJSIP/foo and
	  get notifications for channels PJSIP/foo-1,PJSIP/foo-2 and
	  endpoint PJSIP/foo - subscribe to endpoint:PJSIP/bar and get
	  notifications for channels PJSIP/bar-1 and endpoint PJSIP/bar -
	  subscribe to endpoint:PJSIP and get notifications for channels
	  PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints
	  PJSIP/foo,PJSIP/bar Note that since endpoint PJSIP never changes,
	  it never has events itself. It merely provides an aggregation
	  point for all other endpoints in its technology (which in turn
	  aggregate all channel messages associated with that endpoint).
	  This patch also adds endpoints to res_xmpp and chan_motif,
	  because the actual messaging work will need it (messaging without
	  XMPP is just sad). Review:
	  https://reviewboard.asterisk.org/r/3760/ ASTERISK-23692 ........
	  Merged revisions 419196 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-22 14:36 +0000 [r419180]  Joshua Colp <jcolp@digium.com>

	* channels/chan_iax2.c: chan_iax2: Restore previous behavior of
	  iax2_best_codec. The iax2_best_codec function was changed to
	  convert the formats into a format compatibilities structure and
	  grab the first format from it. The resulting order differs from
	  the previous order of iax2_best_codec which causes unexpected
	  formats to get chosen (such as g723). This commit brings back the
	  old behavior of iax2_best_codec by having a specified preference
	  list. Review: https://reviewboard.asterisk.org/r/3835/

2014-07-22 14:22 +0000 [r419110-419175]  Kinsey Moore <kmoore@digium.com>

	* addons/ooh323c/src/printHandler.c, tests/test_sorcery_realtime.c,
	  tests/test_json.c, addons/ooh323c/src/ooq931.c,
	  tests/test_astobj2_thrash.c, addons/chan_ooh323.c, /,
	  tests/test_optional_api.c, tests/test_abstract_jb.c,
	  apps/app_meetme.c, tests/test_logger.c, tests/test_event.c,
	  tests/test_hashtab_thrash.c, res/res_mwi_external_ami.c,
	  tests/test_sorcery.c, res/res_corosync.c,
	  tests/test_voicemail_api.c, tests/test_aoc.c,
	  tests/test_astobj2.c, tests/test_config.c: Fix more dev-mode
	  build issues ........ Merged revisions 419129 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 419162 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 419163 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/dial.c: Dial API: Prevent crash on NULL cap This prevents a
	  crash in the Dial API triggered by use of the Page() application
	  where a format capability struct was used before checking whether
	  it was NULL. ASTERISK-24074 #close

	* channels/chan_skinny.c, tests/test_core_format.c: Fix build in
	  dev-mode

2014-07-21 16:26 +0000 [r419109]  Jonathan Rose <jrose@digium.com>

	* channels/chan_iax2.c: chan_iax2: Restore codec choice behavior
	  from media formats branch After merging the media formats branch,
	  chan_iax2 was discarding codec preferences for the purpose of
	  choosing which codec a channel would use once a call started.
	  This patch restores the Asterisk 1.8-12 codec choice behaviors.
	  ASTERISK-23958 #close Review:
	  https://reviewboard.asterisk.org/r/3800/

2014-07-21 16:09 +0000 [r419093]  Joshua Colp <jcolp@digium.com>

	* channels/chan_iax2.c: chan_iax2: Only send mini frames if the
	  underlying format has not changed, not if it has. ASTERISK-24072
	  #close Reported by: Matt Jordan

2014-07-21 14:49 +0000 [r419077]  Sean Bright <sean@malleable.com>

	* configure, configure.ac: Fix build when pjproject is installed in
	  a non-standard location. When configuring Asterisk to build
	  against a version of pjproject installed in a non-standard
	  location, the checks for "PJSIP Transaction Group Lock Support"
	  and "PJSIP Media Stream Replacement Support" fail. This is
	  because these secondary checks are not taking the CFLAGS and LIBS
	  returned by the pkg-config check into account. Review:
	  https://reviewboard.asterisk.org/r/3830

2014-07-21 08:41 +0000 [r419060]  Corey Farrell <git@cfware.com>

	* channels/sig_analog.c, res/res_smdi.c, channels/chan_motif.c,
	  include/asterisk/smdi.h, apps/app_voicemail.c,
	  channels/chan_dahdi.c: res_smdi: convert to astobj2 Remove
	  functions: ast_smdi_interface_unref ast_smdi_md_message_putback
	  ast_smdi_mwi_message_putback ast_smdi_md_message destructor
	  ast_smdi_mwi_message destructor Includes for astobj.h are removed
	  everywhere it's possible. ASTERISK-24066 #close Review:
	  https://reviewboard.asterisk.org/r/3758/

2014-07-20 22:06 +0000 [r419044]  Matthew Jordan <mjordan@digium.com>

	* apps/app_confbridge.c, res/ari/resource_channels.c,
	  include/asterisk/rtp_engine.h, include/asterisk/slinfactory.h,
	  res/res_calendar.c, codecs/codec_g722.c,
	  include/asterisk/res_pjsip_session.h, main/frame.c,
	  codecs/ex_lpc10.h, apps/app_dictate.c, res/res_fax.c,
	  apps/app_echo.c, include/asterisk/slin.h, codecs/codec_g726.c,
	  formats/format_ogg_vorbis.c, codecs/codec_gsm.c,
	  codecs/ex_alaw.h, formats/format_wav_gsm.c,
	  channels/iax2/provision.c, channels/chan_iax2.c,
	  res/res_format_attr_h264.c, main/data.c, main/manager.c,
	  include/asterisk/audiohook.h, formats/format_pcm.c,
	  main/config_options.c, res/res_format_attr_silk.c,
	  main/bridge_channel.c, res/res_speech.c, channels/chan_pjsip.c,
	  res/res_clioriginate.c, formats/format_g729.c,
	  channels/chan_unistim.c, res/res_rtp_asterisk.c,
	  include/asterisk/smoother.h (added), main/rtp_engine.c,
	  addons/format_mp3.c, formats/format_wav.c,
	  apps/confbridge/conf_chan_record.c, include/asterisk/speech.h,
	  codecs/ex_adpcm.h, channels/iax2/codec_pref.c (added),
	  include/asterisk/codec.h (added), formats/format_siren7.c,
	  include/asterisk/file.h, channels/chan_dahdi.c,
	  include/asterisk/image.h, funcs/func_channel.c,
	  main/abstract_jb.c, formats/format_h263.c, codecs/codec_dahdi.c,
	  main/dsp.c, apps/app_voicemail.c, apps/app_jack.c,
	  funcs/func_talkdetect.c, channels/chan_vpb.cc,
	  channels/chan_sip.c, formats/format_sln.c,
	  tests/test_abstract_jb.c, codecs/codec_alaw.c, UPGRADE.txt,
	  main/smoother.c (added), codecs/ex_speex.h,
	  channels/chan_console.c, apps/app_talkdetect.c,
	  main/format_pref.c (removed), main/indications.c,
	  include/asterisk/format_cap.h, main/media_index.c,
	  apps/app_agent_pool.c, res/res_pjsip_session.c, main/cli.c,
	  res/res_format_attr_celt.c, channels/chan_skinny.c,
	  tests/test_core_format.c (added), funcs/func_frame_trace.c,
	  res/res_pjsip/pjsip_configuration.c, main/file.c,
	  include/asterisk/frame.h, formats/format_g726.c,
	  apps/app_mixmonitor.c, channels/chan_mgcp.c, main/sorcery.c,
	  codecs/ex_ilbc.h, codecs/codec_lpc10.c, tests/test_format_cache.c
	  (added), apps/app_meetme.c, main/translate.c,
	  apps/app_originate.c, res/parking/parking_applications.c,
	  apps/app_ices.c, channels/iax2/parser.c, res/res_rtp_multicast.c,
	  pbx/pbx_spool.c, funcs/func_pitchshift.c, formats/format_vox.c,
	  main/format_cap.c, tests/test_cel.c, include/asterisk/format.h,
	  formats/format_h264.c, apps/app_chanspy.c, apps/app_nbscat.c,
	  addons/chan_ooh323.c, bridges/bridge_holding.c,
	  channels/iax2/include/codec_pref.h (added), codecs/codec_adpcm.c,
	  apps/app_waitforsilence.c, res/res_pjsip_sdp_rtp.c,
	  addons/chan_ooh323.h, bridges/bridge_simple.c,
	  apps/app_alarmreceiver.c, bridges/bridge_softmix.c,
	  res/res_stasis_snoop.c, main/sounds_index.c, main/core_local.c,
	  main/codec_builtin.c (added), include/asterisk/format_cache.h
	  (added), apps/app_speech_utils.c, res/res_format_attr_opus.c,
	  include/asterisk/abstract_jb.h, main/channel.c,
	  include/asterisk/format_compatibility.h (added), apps/app_mp3.c,
	  tests/test_voicemail_api.c, channels/chan_alsa.c, main/app.c,
	  formats/format_g723.c, codecs/codec_ilbc.c, tests/test_config.c,
	  formats/format_gsm.c, apps/app_milliwatt.c, codecs/ex_ulaw.h,
	  main/asterisk.c, include/asterisk/res_pjsip.h, main/format.c,
	  main/ccss.c, main/bridge.c, codecs/codec_speex.c,
	  include/asterisk/format_pref.h (removed), apps/app_record.c,
	  main/slinfactory.c, res/res_adsi.c, main/core_unreal.c,
	  res/ari/resource_bridges.c, include/asterisk/callerid.h,
	  channels/pjsip/dialplan_functions.c, main/dial.c,
	  channels/dahdi/bridge_native_dahdi.c, main/format_cache.c
	  (added), include/asterisk/mod_format.h, apps/app_sms.c,
	  codecs/codec_resample.c, main/format_compatibility.c (added),
	  main/audiohook.c, formats/format_jpeg.c, res/res_stasis.c,
	  formats/format_g719.c, include/asterisk/translate.h,
	  funcs/func_speex.c, codecs/codec_a_mu.c,
	  channels/iax2/format_compatibility.c (added),
	  apps/app_festival.c, main/channel_internal_api.c,
	  tests/test_format_api.c (removed), codecs/ex_g722.h,
	  main/utils.c, res/ari/resource_sounds.c,
	  res/res_format_attr_h263.c, codecs/ex_g726.h,
	  include/asterisk/_private.h, channels/chan_oss.c,
	  channels/chan_misdn.c, main/codec.c (added), main/callerid.c,
	  addons/ooh323cDriver.c, apps/app_amd.c, codecs/codec_ulaw.c,
	  main/image.c, channels/chan_nbs.c, bridges/bridge_native_rtp.c,
	  channels/iax2/include/format_compatibility.h (added),
	  formats/format_siren14.c, res/res_fax_spandsp.c,
	  addons/chan_mobile.c, addons/ooh323cDriver.h,
	  channels/sip/include/sip.h, tests/test_format_cap.c (added),
	  channels/chan_multicast_rtp.c, include/asterisk/vector.h,
	  channels/chan_bridge_media.c, apps/app_fax.c,
	  main/bridge_basic.c, apps/app_test.c, include/asterisk/channel.h,
	  include/asterisk/data.h, tests/test_core_codec.c (added),
	  res/res_musiconhold.c, codecs/ex_gsm.h, formats/format_ilbc.c,
	  include/asterisk/config_options.h, channels/chan_phone.c,
	  include/asterisk/bridge_channel.h, apps/app_dumpchan.c,
	  channels/chan_motif.c, res/res_agi.c: media formats: re-architect
	  handling of media for performance improvements In the old times
	  media formats were represented using a bit field. This was fast
	  but had a few limitations. 1. Asterisk was limited in how many
	  formats it could handle. 2. Formats, being a bit field, could not
	  include any attribute information. A format was strictly its
	  type, e.g., "this is ulaw". This was changed in Asterisk 10 (see
	  https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
	  for notes on that work) which led to the creation of the
	  ast_format structure. This structure allowed Asterisk to handle
	  attributes and bundle information with a format. Additionally,
	  ast_format_cap was created to act as a container for multiple
	  formats that, together, formed the capability of some entity.
	  Another mechanism was added to allow logic to be registered which
	  performed format attribute negotiation. Everywhere throughout the
	  codebase Asterisk was changed to use this strategy.
	  Unfortunately, in software, there is no free lunch. These new
	  capabilities came at a cost. Performance analysis and profiling
	  showed that we spend an inordinate amount of time comparing,
	  copying, and generally manipulating formats and their related
	  structures. Basic prototyping has shown that a reasonably large
	  performance improvement could be made in this area. This patch is
	  the result of that project, which overhauled the media format
	  architecture and its usage in Asterisk to improve performance.
	  Generally, the new philosophy for handling formats is as follows:
	  * The ast_format structure is reference counted. This removed a
	  large amount of the memory allocations and copying that was done
	  in prior versions. * In order to prevent race conditions while
	  keeping things performant, the ast_format structure is immutable
	  by convention and lock-free. Violate this tenet at your peril! *
	  Because formats are reference counted, codecs are also reference
	  counted. The Asterisk core generally provides built-in codecs and
	  caches the ast_format structures created to represent them.
	  Generally, to prevent inordinate amounts of module reference
	  bumping, codecs and formats can be added at run-time but cannot
	  be removed. * All compatibility with the bit field representation
	  of codecs/formats has been moved to a compatibility API. The
	  primary user of this representation is chan_iax2, which must
	  continue to maintain its bit-field usage of formats for
	  interoperability concerns. * When a format is negotiated with
	  attributes, or when a format cannot be represented by one of the
	  cached formats, a new format object is created or cloned from an
	  existing format. That format may have the same codec underlying
	  it, but is a different format than a version of the format with
	  different attributes or without attributes. * While formats are
	  reference counted objects, the reference count maintained on the
	  format should be manipulated with care. Formats are generally
	  cached and will persist for the lifetime of Asterisk and do not
	  explicitly need to have their lifetime modified. An exception to
	  this is when the user of a format does not know where the format
	  came from *and* the user may outlive the provider of the format.
	  This occurs, for example, when a format is read from a channel:
	  the channel may have a format with attributes (hence, non-cached)
	  and the user of the format may last longer than the channel (if
	  the reference to the channel is released prior to the format's
	  reference). For more information on this work, see the API design
	  notes:
	  https://wiki.asterisk.org/wiki/display/AST/Media+Format+Rewrite
	  Finally, this work was the culmination of a large number of
	  developer's efforts. Extra thanks goes to Corey Farrell, who took
	  on a large amount of the work in the Asterisk core, chan_sip, and
	  was an invaluable resource in peer reviews throughout this
	  project. There were a substantial number of patches contributed
	  during this work; the following issues/patch names simply reflect
	  some of the work (and will cause the release scripts to give
	  attribution to the individuals who work on them). Reviews:
	  https://reviewboard.asterisk.org/r/3814
	  https://reviewboard.asterisk.org/r/3808
	  https://reviewboard.asterisk.org/r/3805
	  https://reviewboard.asterisk.org/r/3803
	  https://reviewboard.asterisk.org/r/3801
	  https://reviewboard.asterisk.org/r/3798
	  https://reviewboard.asterisk.org/r/3800
	  https://reviewboard.asterisk.org/r/3794
	  https://reviewboard.asterisk.org/r/3793
	  https://reviewboard.asterisk.org/r/3792
	  https://reviewboard.asterisk.org/r/3791
	  https://reviewboard.asterisk.org/r/3790
	  https://reviewboard.asterisk.org/r/3789
	  https://reviewboard.asterisk.org/r/3788
	  https://reviewboard.asterisk.org/r/3787
	  https://reviewboard.asterisk.org/r/3786
	  https://reviewboard.asterisk.org/r/3784
	  https://reviewboard.asterisk.org/r/3783
	  https://reviewboard.asterisk.org/r/3778
	  https://reviewboard.asterisk.org/r/3774
	  https://reviewboard.asterisk.org/r/3775
	  https://reviewboard.asterisk.org/r/3772
	  https://reviewboard.asterisk.org/r/3761
	  https://reviewboard.asterisk.org/r/3754
	  https://reviewboard.asterisk.org/r/3753
	  https://reviewboard.asterisk.org/r/3751
	  https://reviewboard.asterisk.org/r/3750
	  https://reviewboard.asterisk.org/r/3748
	  https://reviewboard.asterisk.org/r/3747
	  https://reviewboard.asterisk.org/r/3746
	  https://reviewboard.asterisk.org/r/3742
	  https://reviewboard.asterisk.org/r/3740
	  https://reviewboard.asterisk.org/r/3739
	  https://reviewboard.asterisk.org/r/3738
	  https://reviewboard.asterisk.org/r/3737
	  https://reviewboard.asterisk.org/r/3736
	  https://reviewboard.asterisk.org/r/3734
	  https://reviewboard.asterisk.org/r/3722
	  https://reviewboard.asterisk.org/r/3713
	  https://reviewboard.asterisk.org/r/3703
	  https://reviewboard.asterisk.org/r/3689
	  https://reviewboard.asterisk.org/r/3687
	  https://reviewboard.asterisk.org/r/3674
	  https://reviewboard.asterisk.org/r/3671
	  https://reviewboard.asterisk.org/r/3667
	  https://reviewboard.asterisk.org/r/3665
	  https://reviewboard.asterisk.org/r/3625
	  https://reviewboard.asterisk.org/r/3602
	  https://reviewboard.asterisk.org/r/3519
	  https://reviewboard.asterisk.org/r/3518
	  https://reviewboard.asterisk.org/r/3516
	  https://reviewboard.asterisk.org/r/3515
	  https://reviewboard.asterisk.org/r/3512
	  https://reviewboard.asterisk.org/r/3506
	  https://reviewboard.asterisk.org/r/3413
	  https://reviewboard.asterisk.org/r/3410
	  https://reviewboard.asterisk.org/r/3387
	  https://reviewboard.asterisk.org/r/3388
	  https://reviewboard.asterisk.org/r/3389
	  https://reviewboard.asterisk.org/r/3390
	  https://reviewboard.asterisk.org/r/3321
	  https://reviewboard.asterisk.org/r/3320
	  https://reviewboard.asterisk.org/r/3319
	  https://reviewboard.asterisk.org/r/3318
	  https://reviewboard.asterisk.org/r/3266
	  https://reviewboard.asterisk.org/r/3265
	  https://reviewboard.asterisk.org/r/3234
	  https://reviewboard.asterisk.org/r/3178 ASTERISK-23114 #close
	  Reported by: mjordan media_formats_translation_core.diff uploaded
	  by kharwell (License 6464) rb3506.diff uploaded by mjordan
	  (License 6283) media_format_app_file.diff uploaded by kharwell
	  (License 6464) misc-2.diff uploaded by file (License 5000)
	  chan_mild-3.diff uploaded by file (License 5000)
	  chan_obscure.diff uploaded by file (License 5000) jingle.diff
	  uploaded by file (License 5000) funcs.diff uploaded by file
	  (License 5000) formats.diff uploaded by file (License 5000)
	  core.diff uploaded by file (License 5000) bridges.diff uploaded
	  by file (License 5000) mf-codecs-2.diff uploaded by file (License
	  5000) mf-app_fax.diff uploaded by file (License 5000)
	  mf-apps-3.diff uploaded by file (License 5000)
	  media-formats-3.diff uploaded by file (License 5000)
	  ASTERISK-23715 rb3713.patch uploaded by coreyfarrell (License
	  5909) rb3689.patch uploaded by mjordan (License 6283)
	  ASTERISK-23957 rb3722.patch uploaded by mjordan (License 6283)
	  mf-attributes-3.diff uploaded by file (License 5000)
	  ASTERISK-23958 Tested by: jrose rb3822.patch uploaded by
	  coreyfarrell (License 5909) rb3800.patch uploaded by jrose
	  (License 6182) chan_sip.diff uploaded by mjordan (License 6283)
	  rb3747.patch uploaded by jrose (License 6182) ASTERISK-23959
	  #close Tested by: sgriepentrog, mjordan, coreyfarrell
	  sip_cleanup.diff uploaded by opticron (License 6273)
	  chan_sip_caps.diff uploaded by mjordan (License 6283)
	  rb3751.patch uploaded by coreyfarrell (License 5909)
	  chan_sip-3.diff uploaded by file (License 5000) ASTERISK-23960
	  #close Tested by: opticron direct_media.diff uploaded by opticron
	  (License 6273) pjsip-direct-media.diff uploaded by file (License
	  5000) format_cap_remove.diff uploaded by opticron (License 6273)
	  media_format_fixes.diff uploaded by opticron (License 6273)
	  chan_pjsip-2.diff uploaded by file (License 5000) ASTERISK-23966
	  #close Tested by: rmudgett rb3803.patch uploaded by rmudgetti
	  (License 5621) chan_dahdi.diff uploaded by file (License 5000)
	  ASTERISK-24064 #close Tested by: coreyfarrell, mjordan, opticron,
	  file, rmudgett, sgriepentrog, jrose rb3814.patch uploaded by
	  rmudgett (License 5621) moh_cleanup.diff uploaded by opticron
	  (License 6273) bridge_leak.diff uploaded by opticron (License
	  6273) translate.diff uploaded by file (License 5000) rb3795.patch
	  uploaded by rmudgett (License 5621) tls_fix.diff uploaded by
	  mjordan (License 6283) fax-mf-fix-2.diff uploaded by file
	  (License 5000) rtp_transfer_stuff uploaded by mjordan (License
	  6283) rb3787.patch uploaded by rmudgett (License 5621)
	  media-formats-explicit-translate-format-3.diff uploaded by file
	  (License 5000) format_cache_case_fix.diff uploaded by opticron
	  (License 6273) rb3774.patch uploaded by rmudgett (License 5621)
	  rb3775.patch uploaded by rmudgett (License 5621)
	  rtp_engine_fix.diff uploaded by opticron (License 6273)
	  rtp_crash_fix.diff uploaded by opticron (License 6273)
	  rb3753.patch uploaded by mjordan (License 6283) rb3750.patch
	  uploaded by mjordan (License 6283) rb3748.patch uploaded by
	  rmudgett (License 5621) media_format_fixes.diff uploaded by
	  opticron (License 6273) rb3740.patch uploaded by mjordan (License
	  6283) rb3739.patch uploaded by mjordan (License 6283)
	  rb3734.patch uploaded by mjordan (License 6283) rb3689.patch
	  uploaded by mjordan (License 6283) rb3674.patch uploaded by
	  coreyfarrell (License 5909) rb3671.patch uploaded by coreyfarrell
	  (License 5909) rb3667.patch uploaded by coreyfarrell (License
	  5909) rb3665.patch uploaded by mjordan (License 6283)
	  rb3625.patch uploaded by coreyfarrell (License 5909) rb3602.patch
	  uploaded by coreyfarrell (License 5909)
	  format_compatibility-2.diff uploaded by file (License 5000)
	  core.diff uploaded by file (License 5000)

2014-07-18 21:48 +0000 [r419022]  Matthew Jordan <mjordan@digium.com>

	* rest-api/api-docs/recordings.json, res/ari/resource_recordings.c,
	  res/stasis_recording/stored.c, res/res_ari_recordings.c, /,
	  include/asterisk/stasis_app_recording.h,
	  res/ari/resource_recordings.h, CHANGES: ari: Add a copy operation
	  for stored recordings This patch adds a new operation for stored
	  recordings, copy. It takes an existing stored recording and makes
	  a copy of it in the same directory or a relative directory under
	  the stored recording directory.
	  /ari/recordings/stored/{recordingName}/copy?destinationRecordingName={copy_name}
	  This is particularly useful for voicemail-esque applications,
	  which may need to copy or move recordings around a directory
	  structure. Review: https://reviewboard.asterisk.org/r/3768/
	  ASTERISK-24036 #close Reported by: Sam Galarneau Tested by: Sam
	  Galarneau ........ Merged revisions 419021 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-18 21:25 +0000 [r418997-419020]  Corey Farrell <git@cfware.com>

	* main/stasis_message_router.c, /: stasis: fix call to ao2_t_alloc
	  for stasis_message_router_create This fixes a build failure
	  introduced by r3821. struct stasis_topic is opaque, so
	  topic->name is unavailable. Switch to using stasis_topic_name().
	  ........ Merged revisions 419019 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis.c, main/stasis_cache_pattern.c,
	  main/stasis_message.c, main/stasis_message_router.c, /: stasis:
	  use ao2_t_alloc for certain object allocators Add tags to stasis
	  objects using the name. This makes it easier to track the source
	  of certain stasis ref leaks. Review:
	  https://reviewboard.asterisk.org/r/3821/ ........ Merged
	  revisions 418996 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-18 19:07 +0000 [r418980]  Kinsey Moore <kmoore@digium.com>

	* res/res_fax_spandsp.c: Fix build in dev-mode

2014-07-18 17:55 +0000 [r418961-418963]  Scott Griepentrog <sgriepentrog@digium.com>

	* res/res_pjsip_pubsub.c, main/astobj2.c,
	  include/asterisk/astobj2.h, main/logger.c, main/utils.c: astobj2:
	  assert on invalid ref and backtrace cleanup If a reference count
	  goes negative, instead of just logging that fact, be more helpful
	  with a backtrace and an assert that will DO_CRASH. This patch
	  also removes the duplicate ao2_bt() function and cleans up
	  extraneous usage of the ast_log_backtrace() call. Review:
	  https://reviewboard.asterisk.org/r/3765/

	* /, channels/chan_sip.c: media formats: fix ref leak of peer for
	  mwi subscription Holding a reference to the peer during mwi
	  subscriptions resulted in a circular reference because the final
	  event message would not be sent until destruction of the peer.
	  Instead, pass the name of the peer to the event callback so that
	  it can fail gracefully after the peer has gone. ASTERISK-23959
	  Review: https://reviewboard.asterisk.org/r/3754/ ........ Merged
	  revisions 418636 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/features_config.c: feature_config: insure featuregroups
	  and applicationmaps are initialized If the features.conf is
	  missing, the cfg->featurgroups and cfg->applicationmaps is not
	  initialized, resulting in assert on ao2_find of a null container.
	  This patch changes the initialization call and adds asserts for a
	  safeguard. Review: https://reviewboard.asterisk.org/r/3809/
	  ........ Merged revisions 418886 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-18 16:47 +0000 [r418938]  Richard Mudgett <rmudgett@digium.com>

	* funcs/func_audiohookinherit.c, /: func_audiohookinherit.c: Fixup
	  some XML documentation wording. ........ Merged revisions 418937
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-18 16:28 +0000 [r418911-418936]  Jonathan Rose <jrose@digium.com>

	* main/channel.c, funcs/func_audiohookinherit.c, /,
	  include/asterisk/audiohook.h, main/framehook.c, res/res_fax.c,
	  main/bridge_basic.c, include/asterisk/res_fax.h,
	  bridges/bridge_native_rtp.c, main/audiohook.c, CHANGES,
	  include/asterisk/framehook.h, res/res_pjsip_refer.c: Channels:
	  Masquerades to automatically move frame/audio hooks Whenever
	  possible, audiohooks and framehooks will now be copied over to
	  the channel that the masquerading channel gets cloned into. This
	  should occur for all audiohooks and most framehooks. As a result,
	  in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now
	  deprecated and its behavior is essentially the new default for
	  all audiohooks, plus some additional audiohooks/framehooks.
	  Review: https://reviewboard.asterisk.org/r/3721/ ........ Merged
	  revisions 418914 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_fax.c, include/asterisk/res_fax.h, CHANGES,
	  res/res_fax.exports.in, res/res_fax_spandsp.c: res_fax: Provide
	  AMI equivalents for fax CLI commands Specifically the following
	  equivalents were created: fax show session -> FAXSession fax show
	  sessions -> FAXSessions fax show stats -> FAXStats Review:
	  https://reviewboard.asterisk.org/r/3666/

2014-07-18 00:11 +0000 [r418893-418895]  Sean Bright <sean@malleable.com>

	* config.sub, menuselect/config.guess, menuselect/config.sub,
	  config.guess: Update config.guess and config.sub

	* autoconf/ast_ext_tool_check.m4: Add missing file from previous
	  commit.

	* menuselect/aclocal.m4, menuselect/configure,
	  menuselect/acinclude.m4 (removed), menuselect/bootstrap.sh,
	  menuselect/autoconfig.h.in: Import Asterisk's autoconf magic
	  instead of using our own.

2014-07-17 21:17 +0000 [r418832-418870]  Matthew Jordan <mjordan@digium.com>

	* configs/samples/acl.conf.sample (added),
	  configs/samples/extensions.conf.sample (added),
	  configs/res_parking.conf.sample (removed),
	  configs/samples/cel_sqlite3_custom.conf.sample (added),
	  configs/cdr_sqlite3_custom.conf.sample (removed),
	  configs/modules.conf.sample (removed),
	  configs/samples/cli_aliases.conf.sample (added),
	  configs/meetme.conf.sample (removed),
	  configs/cdr_pgsql.conf.sample (removed),
	  configs/samples/extensions.ael.sample (added),
	  configs/samples/cdr_adaptive_odbc.conf.sample (added),
	  configs/samples/motif.conf.sample (added),
	  configs/samples/extensions_minivm.conf.sample (added),
	  configs/samples/res_curl.conf.sample (added),
	  configs/res_config_sqlite3.conf.sample (removed),
	  configs/mgcp.conf.sample (removed), configs/dsp.conf.sample
	  (removed), configs/udptl.conf.sample (removed),
	  configs/sip.conf.sample (removed), configs/dbsep.conf.sample
	  (removed), configs/queuerules.conf.sample (removed),
	  configs/samples/cdr_mysql.conf.sample (added),
	  configs/confbridge.conf.sample (removed),
	  configs/samples/cdr_odbc.conf.sample (added),
	  configs/samples/minivm.conf.sample (added),
	  configs/enum.conf.sample (removed),
	  configs/samples/codecs.conf.sample (added),
	  configs/samples/chan_dahdi.conf.sample (added),
	  configs/samples/cdr_custom.conf.sample (added),
	  configs/samples/res_config_mysql.conf.sample (added),
	  configs/samples/dundi.conf.sample (added),
	  configs/samples/oss.conf.sample (added),
	  configs/samples/app_mysql.conf.sample (added),
	  configs/samples/queues.conf.sample (added),
	  configs/samples/cdr.conf.sample (added),
	  configs/samples/cdr_syslog.conf.sample (added),
	  configs/festival.conf.sample (removed),
	  configs/samples/cel_pgsql.conf.sample (added),
	  configs/http.conf.sample (removed), configs/phoneprov.conf.sample
	  (removed), configs/alarmreceiver.conf.sample (removed),
	  configs/samples/features.conf.sample (added),
	  configs/cdr_tds.conf.sample (removed),
	  configs/func_odbc.conf.sample (removed),
	  configs/samples/logger.conf.sample (added),
	  configs/samples/res_odbc.conf.sample (added),
	  configs/samples/agents.conf.sample (added),
	  configs/res_fax.conf.sample (removed),
	  configs/samples/xmpp.conf.sample (added),
	  configs/iaxprov.conf.sample (removed),
	  configs/res_pgsql.conf.sample (removed),
	  configs/extensions.conf.sample (removed),
	  configs/chan_mobile.conf.sample (removed), configs/asterisk.adsi
	  (removed), configs/cel_sqlite3_custom.conf.sample (removed),
	  configs/users.conf.sample (removed),
	  configs/samples/res_pktccops.conf.sample (added),
	  configs/samples/amd.conf.sample (added), configs/rtp.conf.sample
	  (removed), configs/samples/res_parking.conf.sample (added),
	  configs/hep.conf.sample (removed),
	  configs/samples/modules.conf.sample (added),
	  configs/cel_tds.conf.sample (removed),
	  configs/res_curl.conf.sample (removed),
	  configs/samples/skinny.conf.sample (added),
	  configs/samples/cdr_pgsql.conf.sample (added),
	  configs/samples/sip_notify.conf.sample (added),
	  configs/samples/test_sorcery.conf.sample (added),
	  configs/samples/dsp.conf.sample (added),
	  configs/ss7.timers.sample (removed),
	  configs/samples/udptl.conf.sample (added),
	  configs/cdr_odbc.conf.sample (removed),
	  configs/samples/sip.conf.sample (added),
	  configs/minivm.conf.sample (removed),
	  configs/res_config_sqlite.conf.sample (removed),
	  configs/codecs.conf.sample (removed), configs/osp.conf.sample
	  (removed), configs/samples/cel_custom.conf.sample (added),
	  configs/samples/dbsep.conf.sample (added),
	  configs/samples/app_skel.conf.sample (added),
	  configs/console.conf.sample (removed),
	  configs/cdr_manager.conf.sample (removed),
	  configs/cdr_custom.conf.sample (removed),
	  configs/chan_dahdi.conf.sample (removed),
	  configs/res_config_mysql.conf.sample (removed),
	  configs/samples/statsd.conf.sample (added),
	  configs/cli.conf.sample (removed), configs/queues.conf.sample
	  (removed), configs/cdr_syslog.conf.sample (removed), UPGRADE.txt,
	  configs/manager.conf.sample (removed),
	  configs/samples/res_corosync.conf.sample (added),
	  configs/features.conf.sample (removed), configs/sla.conf.sample
	  (removed), configs/logger.conf.sample (removed),
	  configs/res_odbc.conf.sample (removed),
	  configs/agents.conf.sample (removed),
	  configs/samples/ooh323.conf.sample (added), Makefile,
	  configs/xmpp.conf.sample (removed),
	  configs/samples/phoneprov.conf.sample (added),
	  configs/samples/alarmreceiver.conf.sample (added),
	  configs/samples/cdr_tds.conf.sample (added),
	  configs/extconfig.conf.sample (removed),
	  configs/samples/func_odbc.conf.sample (added),
	  configs/samples/res_fax.conf.sample (added),
	  configs/samples/iaxprov.conf.sample (added),
	  configs/samples/res_ldap.conf.sample (added),
	  configs/samples/dnsmgr.conf.sample (added),
	  configs/res_pktccops.conf.sample (removed),
	  configs/cel.conf.sample (removed),
	  configs/samples/res_pgsql.conf.sample (added),
	  configs/samples/chan_mobile.conf.sample (added),
	  configs/samples/asterisk.adsi (added),
	  configs/samples/users.conf.sample (added),
	  configs/samples/rtp.conf.sample (added),
	  configs/phone.conf.sample (removed), configs/skinny.conf.sample
	  (removed), configs/muted.conf.sample (removed),
	  configs/samples/hep.conf.sample (added), configs/iax.conf.sample
	  (removed), configs/samples/cel_tds.conf.sample (added),
	  configs/sip_notify.conf.sample (removed),
	  configs/samples/telcordia-1.adsi (added),
	  configs/samples/alsa.conf.sample (added),
	  configs/samples/adsi.conf.sample (added),
	  configs/test_sorcery.conf.sample (removed),
	  configs/samples/followme.conf.sample (added),
	  configs/samples/asterisk.conf.sample (added),
	  configs/extensions.lua.sample (removed), configs/say.conf.sample
	  (removed), configs/cel_custom.conf.sample (removed),
	  configs/samples/ss7.timers.sample (added),
	  configs/samples/cel_odbc.conf.sample (added),
	  configs/app_skel.conf.sample (removed),
	  configs/samples/ccss.conf.sample (added),
	  configs/cli_permissions.conf.sample (removed),
	  configs/statsd.conf.sample (removed),
	  configs/samples/res_config_sqlite.conf.sample (added),
	  configs/config_test.conf.sample (removed),
	  configs/indications.conf.sample (removed),
	  configs/samples/osp.conf.sample (added),
	  configs/samples/cdr_manager.conf.sample (added),
	  configs/samples/console.conf.sample (added),
	  configs/voicemail.conf.sample (removed),
	  configs/res_corosync.conf.sample (removed),
	  configs/misdn.conf.sample (removed),
	  configs/samples/cli.conf.sample (added), configs/ari.conf.sample
	  (removed), configs/ooh323.conf.sample (removed),
	  configs/samples/calendar.conf.sample (added),
	  configs/samples/res_stun_monitor.conf.sample (added),
	  configs/samples/manager.conf.sample (added),
	  configs/samples/pjsip_notify.conf.sample (added),
	  configs/samples/sla.conf.sample (added),
	  configs/musiconhold.conf.sample (removed),
	  configs/pjsip.conf.sample (removed), configs/sorcery.conf.sample
	  (removed), configs/vpb.conf.sample (removed),
	  configs/unistim.conf.sample (removed),
	  configs/res_ldap.conf.sample (removed),
	  configs/dnsmgr.conf.sample (removed),
	  configs/samples/extconfig.conf.sample (added),
	  configs/samples/res_snmp.conf.sample (added),
	  configs/acl.conf.sample (removed),
	  configs/samples/smdi.conf.sample (added),
	  configs/samples/cel.conf.sample (added),
	  configs/cli_aliases.conf.sample (removed),
	  configs/samples/cdr_sqlite3_custom.conf.sample (added),
	  configs/extensions.ael.sample (removed),
	  configs/cdr_adaptive_odbc.conf.sample (removed),
	  configs/samples/phone.conf.sample (added),
	  configs/extensions_minivm.conf.sample (removed),
	  configs/motif.conf.sample (removed), configs/telcordia-1.adsi
	  (removed), configs/samples/meetme.conf.sample (added),
	  configs/adsi.conf.sample (removed), configs/alsa.conf.sample
	  (removed), configs/samples/muted.conf.sample (added),
	  configs/followme.conf.sample (removed),
	  configs/asterisk.conf.sample (removed),
	  configs/samples/iax.conf.sample (added),
	  configs/samples/res_config_sqlite3.conf.sample (added),
	  configs/samples/mgcp.conf.sample (added),
	  configs/cel_odbc.conf.sample (removed), configs/ccss.conf.sample
	  (removed), configs/cdr_mysql.conf.sample (removed),
	  configs/samples/extensions.lua.sample (added),
	  configs/samples/say.conf.sample (added),
	  configs/dundi.conf.sample (removed),
	  configs/samples/queuerules.conf.sample (added),
	  configs/oss.conf.sample (removed), configs/app_mysql.conf.sample
	  (removed), configs/samples/confbridge.conf.sample (added),
	  configs/samples/cli_permissions.conf.sample (added),
	  configs/samples/enum.conf.sample (added),
	  configs/samples/config_test.conf.sample (added),
	  configs/cdr.conf.sample (removed),
	  configs/samples/indications.conf.sample (added),
	  configs/cel_pgsql.conf.sample (removed),
	  configs/res_stun_monitor.conf.sample (removed),
	  configs/calendar.conf.sample (removed),
	  configs/samples/voicemail.conf.sample (added),
	  configs/pjsip_notify.conf.sample (removed),
	  configs/samples/misdn.conf.sample (added),
	  configs/samples/ari.conf.sample (added),
	  configs/samples/festival.conf.sample (added),
	  configs/samples/http.conf.sample (added),
	  configs/res_snmp.conf.sample (removed),
	  configs/samples/musiconhold.conf.sample (added),
	  configs/samples/pjsip.conf.sample (added),
	  configs/samples/sorcery.conf.sample (added),
	  configs/samples/vpb.conf.sample (added), configs/smdi.conf.sample
	  (removed), configs/samples/unistim.conf.sample (added),
	  configs/samples (added), configs/amd.conf.sample (removed):
	  configs: Move sample config files into a subdirectory of configs
	  This moves all samples configs from configs/ to configs/samples.
	  This allows for additional sets of sample configuration files to
	  be added in the future. Review:
	  https://reviewboard.asterisk.org/r/3804/

	* channels/chan_sip.c, UPGRADE.txt: chan_sip: Make
	  progressinband=never really mean 'never' progressinband=never in
	  sip.conf is easily defeated if an onward trunk sends a progress
	  indication of its own. This is almost certain to happen if the
	  onward trunk is ISDN or IAX as these technologies send a progress
	  indication even if early media is not required. This progress
	  message is passed to the caller, and causes the "never" option to
	  be rather badly named. This patch changes the behaviour of this
	  setting in the following ways: 1) In sip_write(), do not pass the
	  media unless we have either progressed beyond INV_EARLY_MEDIA, or
	  we are in INV_EARLY_MEDIA state, and early media is both set-up
	  and wanted. This helps resolve double-ringing on some buggy
	  handsets. 2) In sip_indicate(), if we see AST_CONTROL_PROGRESS,
	  but SIP_PROG_INBAND_NEVER is set, send a 180 Ringing instead to
	  avoid implicitly enabling early media. Avoid sending double ring
	  indications. NOTE: the meaning of the SIP_PROGRESS_SENT flag
	  changes slightly in this patch to also encapsulate the fact that
	  a channel has *sent or received* a 183 Progress indication. This
	  makes the updated code in sip_write() much more simple. Review:
	  https://reviewboard.asterisk.org/r/3700 ASTERISK-23972 #close
	  Reported by: Steve Davies patches:
	  inband_never_present_early_media2 uploaded by Steve Davies
	  (License 5012)

	* menuselect: Add svn:ignore property

	* UPGRADE.txt, menuselect/configure, menuselect/configure.ac,
	  configure, configure.ac: configure: Fix libxml2 development
	  library dependency checking The commit that added libxml2 support
	  didn't fully check for the libxml2 development script in the
	  Asterisk configure file. As a result, Asterisk could be
	  configured, then fail on menuselect. This patch fixes it so that
	  Asterisk should detect the libxml2 dependency failure first.

	* menuselect/makeopts.in, menuselect/autoconfig.h.in,
	  menuselect/menuselect.h, menuselect/example_menuselect-tree,
	  configure, include/asterisk/autoconfig.h.in, menuselect/Makefile,
	  menuselect/README, menuselect/aclocal.m4, configure.ac,
	  UPGRADE.txt, menuselect/configure, menuselect/configure.ac,
	  menuselect/menuselect.c, menuselect/acinclude.m4: menuselect: Add
	  libxml2 support (Patch 3) This is the final patch in adding
	  menuselect to Asterisk. - The first patch (r418832) added
	  menuselect along with mxml - The second patch (r418833) removed
	  mxml from menuselect This patch adds support for libxml2 to
	  menuselect, and makes libxml2 a required library for Asterisk.
	  Note that the libxml2 portion of this patch was written by Sean
	  Bright, and was made available on a team branch:
	  http://svn.digium.com/svn/menuselect/team/seanbright/libxml2/
	  Review: https://reviewboard.asterisk.org/r/3773/ ASTERISK-20703
	  #close patches: some_mysterious_team_branch uploaded by
	  seanbright (License 5060)

	* menuselect/mxml (removed): menuselect: Remove mxml from
	  menuselect (Patch 2) This is the second patch that adds
	  menuselect to Asterisk trunk. The previous commit (r418832) added
	  menuselect along with mxml; this patch removes mxml completely
	  from Menuselect. A subsequent patch will switch menuselect over
	  to using libxml2, and make libxml2 a required dependency for
	  Asterisk. ASTERISK-20703

	* menuselect/mxml/configure.in (added), menuselect/acinclude.m4
	  (added), menuselect/mxml/mxml.list.in (added),
	  menuselect/mxml/README (added), menuselect/linkedlists.h (added),
	  menuselect/mxml (added), menuselect/mxml/config.h.in (added),
	  menuselect/aclocal.m4 (added), menuselect/install-sh (added),
	  menuselect/mxml/mxml-string.c (added),
	  menuselect/menuselect_stub.c (added), menuselect/make_version
	  (added), menuselect/mxml/mxml-entity.c (added),
	  menuselect/bootstrap.sh (added), menuselect/makeopts.in (added),
	  menuselect/autoconfig.h.in (added), menuselect/config.guess
	  (added), menuselect/mxml/install-sh (added),
	  menuselect/test/build_tools/menuselect-deps (added), /,
	  menuselect/contrib/menuselect-dummy (added),
	  menuselect/config.sub (added), menuselect/mxml/configure (added),
	  menuselect/mxml/Makefile.in (added), menuselect (added),
	  menuselect/contrib (added), menuselect/mxml/mxml.pc.in (added),
	  menuselect/configure.ac (added), menuselect/mxml/mxml-set.c
	  (added), menuselect/contrib/Makefile-dummy (added),
	  menuselect/mxml/ANNOUNCEMENT (added), menuselect/missing (added),
	  menuselect/menuselect_curses.c (added),
	  menuselect/example_menuselect-tree (added), menuselect/Makefile
	  (added), menuselect/mxml/mxml-search.c (added), menuselect/test
	  (added), menuselect/test/menuselect-tree (added),
	  menuselect/mxml/mxml.h (added), menuselect/mxml/mxml-index.c
	  (added), menuselect/configure (added),
	  menuselect/menuselect_newt.c (added), menuselect/mxml/mxml-attr.c
	  (added), menuselect/mxml/mxml-private.c (added),
	  menuselect/menuselect.c (added), menuselect/mxml/CHANGES (added),
	  menuselect/mxml/COPYING (added), menuselect/mxml/mxml-file.c
	  (added), menuselect/menuselect.h (added),
	  menuselect/menuselect_gtk.c (added), menuselect/README (added),
	  menuselect/strcompat.c (added), menuselect/mxml/mxml-node.c
	  (added), menuselect/test/build_tools (added): menuselect: Add
	  menuselect to Asterisk trunk (Patch 1) This is the first patch
	  that adds menuselect to Asterisk trunk, and removes the
	  svn:externals property. This is being done for two reasons: (1)
	  The removal of external repositories eases a future migration to
	  git (2) Asterisk is now the only thing that uses menuselect; as a
	  result, there's little need to keep it in an external repository
	  Subsequent patches will remove the mxml dependency from
	  menuselect and tidy up the build system. ASTERISK-20703

2014-07-17 14:28 +0000 [r418811]  Kinsey Moore <kmoore@digium.com>

	* /, main/bridge_channel.c: TEST_FRAMEWORK: Fix threewaytransfer
	  reporting Ensure that three-way transfers can be reported even if
	  featuremap is non-NULL. ........ Merged revisions 418810 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-16 23:08 +0000 [r418788]  Corey Farrell <git@cfware.com>

	* /, channels/dahdi/bridge_native_dahdi.c: Remove include of
	  astobj.h from channels/dahdi/bridge_native_dahdi.c. The include
	  was unneeded, this is split off from r3758 as it applies to 12.
	  ........ Merged revisions 418787 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-16 14:03 +0000 [r418717-418757]  Matthew Jordan <mjordan@digium.com>

	* res/res_pjsip/pjsip_configuration.c, CHANGES, res/res_pjsip.c,
	  channels/chan_pjsip.c, include/asterisk/res_pjsip.h,
	  contrib/ast-db-manage/config/versions/1d50859ed02e_create_accountcode.py
	  (added), /, configs/pjsip.conf.sample: res_pjsip: Support setting
	  a default accountcode on endpoints Most channel drivers let you
	  specify a default accountcode to be set on channels associated
	  with a particular peer/endpoint/object. Prior to this patch,
	  chan_pjsip/res_pjsip did not support such a setting. This patch
	  adds a new setting to the res_pjsip endpoint object,
	  'accountcode'. When a channel is created that is associated with
	  an endpoint with this value set, the channel will automatically
	  have its accountcode property set to the value configured for the
	  endpoint. Review: https://reviewboard.asterisk.org/r/3724/
	  ASTERISK-24000 #close Reported by: Matt Jordan ........ Merged
	  revisions 418756 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* cdr/cdr_pgsql.c, CHANGES, configs/cdr_pgsql.conf.sample,
	  configs/res_pgsql.conf.sample, cel/cel_pgsql.c,
	  res/res_config_pgsql.c, configs/cel_pgsql.conf.sample: cel_pgsql,
	  cdr_pgsql, res_config_pgsql: Add PostgreSQL application_name
	  support This patch adds support for the PostgreSQL
	  application_name connection setting. When the appropriate
	  PostgreSQL module's configuration is set with an application
	  name, the name will be passed to PostgreSQL on connection and
	  displayed in the database's pg_stat_activity view, as well as in
	  CSV logs. This aids in managing which applications/servers are
	  connected to a PostgreSQL database, as well as tracing the
	  activity of those connections. Review:
	  https://reviewboard.asterisk.org/r/3591 ASTERISK-23737 #close
	  Reported by: Gergely Domodi patches: pgsql_application_name.patch
	  uploaded by Gergely Domodi (License 6610)

	* codecs/codec_adpcm.c, main/format.c: codec_adpcm: Change
	  description of codec "ADPCM" to "Dialogic ADPCM" Technically,
	  ADPCM is a method that can be applied to several codecs.
	  Asterisk's ADPCM codec is the Dialogic ADPCM or VOX codec. See
	  http://en.wikipedia.org/wiki/Dialogic_ADPCM for more information
	  about said codec. Review: https://reviewboard.asterisk.org/r/3744
	  patches: rb3744.patch uploaded by dennis.guse (License 6513)

	* UPGRADE.txt, main/manager.c, /: manager: Return ActionID on
	  nominal responses to PresenceState action When the PresenceState
	  action is executed, the nominal path fails to include the
	  ActionID in the successful response. This patch adds a call to
	  astman_start_ack, which guarantees that an ActionID (if provided)
	  will be sent back to the AMI client. Unlike the Asterisk 11 and
	  12 patches, this patch also deprecates the duplicate Message key
	  in the response to the action, replacing it with the key
	  'PresenceMessage'. Review:
	  https://reviewboard.asterisk.org/r/3776/ ASTERISK-23985 #close
	  ........ Merged revisions 418713 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 418714 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-15 23:03 +0000 [r418716]  Kinsey Moore <kmoore@digium.com>

	* /, main/bridge_channel.c: TEST_FRAMEWORK: Fix ref leak in feature
	  activation This fixes two reference leaks that would occur when
	  TEST_FRAMEWORK was enabled and features were successfully
	  executed. ........ Merged revisions 418715 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-15 17:57 +0000 [r418654]  Jonathan Rose <jrose@digium.com>

	* funcs/func_uri.c, /: func_uri: URIENCODE/URIDECODE - allow empty
	  strings as argument Previously these two dialplan functions would
	  issue warnings and return failure when an empty string is used as
	  the argument. Now they will not issue a warning and will
	  successfully return an empty string. ASTERISK-23911 #close
	  Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3745/ ........ Merged
	  revisions 418641 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 418649 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 418650 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-15 12:11 +0000 [r418616]  Sean Bright <sean@malleable.com>

	* main/asterisk.c: Update Asterisk copyright year in
	  main/asterisk.c It's been 2014 for like... 6 months.

2014-07-14 14:55 +0000 [r418566-418587]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/logger.h, /: logger.h: Extract DEBUG_ATLEAST()
	  to complement VERBOSITY_ATLEAST(). ........ Merged revisions
	  418586 from http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/jabber.h (removed), include/asterisk/jingle.h
	  (removed), include/asterisk/frame_defs.h (removed),
	  configs/h323.conf.sample (removed): Actually delete the removed
	  files.

2014-07-13 21:57 +0000 [r418507]  Corey Farrell <git@cfware.com>

	* /, main/astobj2.c, contrib/scripts/refcounter.py: astobj2: work
	  around REF_DEBUG race which causes out of order log entries *
	  Update refcounter.py to use delta's to track the current
	  reference count. * Use result from internal_ao2_ref to write
	  old_refcount to refs_log. Review:
	  https://reviewboard.asterisk.org/r/3756/ ........ Merged
	  revisions 418504 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 418505 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 418506 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-13 20:08 +0000 [r418488]  Scott Griepentrog <sgriepentrog@digium.com>

	* include/asterisk/astobj2.h: astobj2: correct define for
	  ao2_t_cleanup This change maps the ao2_t_cleanup() function to
	  the correct debug function so that it can be used. Review:
	  https://reviewboard.asterisk.org/r/3764/

2014-07-13 16:48 +0000 [r418448-418467]  Corey Farrell <git@cfware.com>

	* main/manager.c, /, apps/app_skel.c: Fix minor reference leaks in
	  app_skel and TEST_FRAMEWORK * Cleanup games object in app_skel. *
	  Cleanup stasis subscription to TEST_FRAMEWORK in manager.c (12+).
	  Review: https://reviewboard.asterisk.org/r/3757/ ........ Merged
	  revisions 418465 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 418466 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/jabber.h, include/asterisk/jingle.h,
	  configs/h323.conf.sample: Remove files left behind on removal of
	  h323, jingle and jabber. This change removes h323.conf.sample,
	  jingle.h, jabber.h left behind by r3698. Review:
	  https://reviewboard.asterisk.org/r/3755/

2014-07-11 23:00 +0000 [r418419]  Matthew Jordan <mjordan@digium.com>

	* main/astobj2.c, include/asterisk/astobj2.h: astobj2: Add tag
	  variants for ao2_bump, ao2_cleanup, and ao2_replace Tags are
	  useful in hunting down ref imbalances; this patch adds tag
	  variants for these commonly used macros/functions. Review:
	  https://reviewboard.asterisk.org/r/3750/

2014-07-11 21:10 +0000 [r418397]  Corey Farrell <git@cfware.com>

	* /, include/asterisk/astobj2.h: astobj2: tweak ao2_replace to do
	  nothing when it would be a NoOp This change causes ao2_replace to
	  do nothing when src == dst. This avoids REF_DEBUG logging when
	  we're not actually doing anything. Review:
	  https://reviewboard.asterisk.org/r/3743/ ........ Merged
	  revisions 418396 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-11 16:42 +0000 [r418370]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, main/config.c: config: inform config hook of change when
	  writing file When updated configuration is written back to the
	  conf file - for example when a user changes their voicemail pin,
	  make sure that any config hook that wants to know of changes is
	  informed. Review: https://reviewboard.asterisk.org/r/3708/
	  ........ Merged revisions 418366 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 418369 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-10 15:36 +0000 [r418325]  Matthew Jordan <mjordan@digium.com>

	* /, include/asterisk/xmpp.h: include/asterisk/xmpp.h: Convert
	  indentation to tabs This is a whitespace only change. ........
	  Merged revisions 418323 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 418324 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-10 01:59 +0000 [r418226-418264]  Richard Mudgett <rmudgett@digium.com>

	* channels/sig_pri.c, /: chan_dahdi/sig_pri: Fix type mismatch in
	  the idledial feature's channel creation. Square pegs in round
	  holes don't work very well. ........ Merged revisions 418261 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 418262 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 418263 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/stasis/stasis_bridge.h (added), main/bridge_channel.c,
	  res/res_stasis.c, /, res/stasis/stasis_bridge.c (added),
	  include/asterisk/bridge_channel.h, main/bridge_basic.c: ARI: Make
	  mixing bridges propagate linkedids and accountcodes. * Create a
	  Stasis bridge sub-class to propagate linkedids and accountcodes.
	  * Fixed the basic bridge sub-class to update peeraccount codes
	  when the number of channels in the bridge drops back down to two
	  parties. * Refactored ast_bridge_channel_update_accountcodes() to
	  handle channels joining/leaving the bridge. * Fixed the basic
	  bridge sub-class to not call the base bridge class pull method
	  twice. AFS-105 #close ASTERISK-23852 #close Reported by: Richard
	  Mudgett Review: https://reviewboard.asterisk.org/r/3720/ ........
	  Merged revisions 418225 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-08 14:48 +0000 [r418174-418183]  Matthew Jordan <mjordan@digium.com>

	* rest-api/api-docs/deviceStates.json,
	  rest-api/api-docs/endpoints.json,
	  rest-api/api-docs/mailboxes.json, rest-api/api-docs/events.json,
	  /, rest-api/api-docs/asterisk.json,
	  rest-api/api-docs/applications.json,
	  rest-api/api-docs/playbacks.json,
	  rest-api/api-docs/channels.json, rest-api/api-docs/sounds.json,
	  rest-api/resources.json, include/asterisk/manager.h,
	  rest-api/api-docs/bridges.json,
	  rest-api/api-docs/recordings.json: manager/ARI: Update version to
	  2.4.0/1.4.0; Update UPGRADE.txt ........ Merged revisions 418182
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Fix undefined
	  function when PJPROJECT is not installed The
	  dtls_perform_handshake function was mistakenly placed under the
	  guards for USE_PJPROJECT. If PJPROJECT was not installed, the
	  function would not be defined, while other functions would
	  attempt to still use it. This prevented res_rtp_asterisk from
	  being loaded. ASTERISK-24001 #close Reported by: Don Fanning
	  ........ Merged revisions 418172 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-07 16:08 +0000 [r418117]  Joshua Colp <jcolp@digium.com>

	* include/asterisk/res_pjsip_body_generator_types.h,
	  res/res_pjsip_dialog_info_body_generator.c (added),
	  res/res_pjsip_exten_state.c, res/res_pjsip/presence_xml.c, /,
	  include/asterisk/res_pjsip_presence_xml.h:
	  res_pjsip_dialog_info_body_generator: Add dialog-info+xml support
	  for presence. This module implements dialog-info+xml for the
	  purposes of presence. This means that phones such as Grandstreams
	  can now subscribe to receive presence information for an
	  extension. ASTERISK-21443 #close Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3705/ ........ Merged
	  revisions 418116 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-07 02:15 +0000 [r418090]  Matthew Jordan <mjordan@digium.com>

	* include/asterisk/stasis_app.h, res/ari/resource_channels.c,
	  res/res_stasis.c, /, res/stasis/app.c: ARI/res_stasis: Subscribe
	  to both Local channel halves when originating to app This patch
	  fixes two bugs: 1. When originating a channel into a Stasis
	  application, we already create a subscription for the channel
	  that is going into our Stasis app. Unfortunately, when you create
	  a Local channel and pass it off to a Stasis app, you really
	  aren't creating just one channel: you're creating two. This patch
	  snags the second half of the Local channel pair (assuming it is a
	  Local channel pair, but luckily core_local is kind about such
	  assumptions) and subscribes to it as well. 2. Subscriptions are a
	  bit sticky right now. If a subscription is made, the 'interest'
	  count gets bumped on the Stasis subscription - but unless
	  something explicitly unsubscribes the channel, said subscription
	  sticks around. This is not much of a problem is a user is
	  creating the subscription - if they made it, they must want it.
	  However, when we are creating implicit subscriptions, we need to
	  make sure something clears them out. This patch takes a
	  pessimistic approach: it watches the cache updates coming from
	  Stasis and, if we notice that the cache just cleared out an
	  object, we delete our subscription object. This keeps our ao2
	  container of Stasis forwards in an application from growing out
	  of hand; it also is a bit more forgiving for end users who may
	  not realize they were supposed to unsubscribe from that channel
	  that just hung up. Review:
	  https://reviewboard.asterisk.org/r/3710/ #ASTERISK-23939 #close
	  ........ Merged revisions 418089 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-07 01:22 +0000 [r418067-418084]  Kinsey Moore <kmoore@digium.com>

	* tests/test_cel.c, main/cel.c, channels/chan_pjsip.c,
	  res/res_pjsip_session.c, /: CEL: Fix incorrect/missing extra
	  field information This corrects two issues with the extra field
	  information in Asterisk 12+ in channel event logs. It is possible
	  to inject custom values into the dialstatus provided by
	  ast_channel_dial_type() Stasis messages that fall outside the
	  enumeration allowed for the DIALSTATUS channel variable. CEL now
	  filters for the allowed values and ignores other values. The
	  "hangupsource" extra field key is always blank if the far end
	  channel is a chan_pjsip channel. This is because the hangupsource
	  is never set for the pjsip channel driver. This change sets the
	  hangupsource whenever a hangup is queued for chan_pjsip channels.
	  This corrects an issue with the pjsip channel driver where the
	  hangupcause information was not being set properly. Review:
	  https://reviewboard.asterisk.org/r/3690/ ........ Merged
	  revisions 418071 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/http.c: HTTP: Fix build for gcc 4.10 ........ Merged
	  revisions 418066 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-04 15:26 +0000 [r418019-418050]  Matthew Jordan <mjordan@digium.com>

	* main/Makefile: main/Makefile: fix compilation error of buildinfo
	  occurring on 'make install' Egads. Another bad deletion of too
	  much when attempting to remove h323 stuff.

	* configure.ac, build_tools/menuselect-deps.in, configure,
	  main/Makefile: configure: Remove last vestiges of h323; DO create
	  menuselect-deps The previous patch (r418034) fixed the 'glitch'
	  that the channels/h323 Makefile no longer existed. Unfortunately,
	  removing the entire line was a bit of a blunder, as it meant that
	  build_tools/menuselect-deps was never generated. Hilarity ensued
	  when actually trying to compile. But hey! At least configure
	  worked. This patch fixes *that* glitch, and removes some more of
	  the vestiges of h323. (It had tendrils in the main Makefile?
	  Crazy.)

	* configure.ac, configure: configure: Update script to pass if
	  channels/h323/Makefile.in does not exist This simply removes that
	  check from the configure script, as r418019 removed chan_h323.

	* apps/app_dahdibarge.c (removed), configs/gtalk.conf.sample
	  (removed), main/pbx.c, apps/app_readfile.c (removed),
	  channels/chan_sip.c, configs/jingle.conf.sample (removed),
	  UPGRADE.txt, res/res_musiconhold.c, channels/chan_gtalk.c
	  (removed), channels/Makefile, CHANGES, res/res_jabber.c
	  (removed), channels/h323 (removed), utils/conf2ael.c,
	  channels/chan_jingle.c (removed), res/ael/pval.c,
	  configs/jabber.conf.sample (removed),
	  configs/asterisk.conf.sample, res/res_agi.c, channels/chan_h323.c
	  (removed), addons/Makefile, pbx/pbx_realtime.c, utils/ael_main.c,
	  include/asterisk/options.h, main/asterisk.c,
	  addons/app_saycountpl.c (removed): Remove many deprecated modules
	  Billing records are fair, To get paid is quite bright, You should
	  really use ODBC; Good-bye cdr_sqlite. Microsoft did once push
	  H.323, Hell, we all remember NetMeeting. But try to compile
	  chan_h323 now And you will take quite a beating. The XMPP and SIP
	  war was fierce, And in the distant fray Was birthed
	  res_jabber/chan_jingle; But neither to stay. For everyone did
	  care and chase what Google professed. "Free Internet Calling" was
	  what devotees cried, But Google did change the specs so often
	  That the developers were happy the day chan_gtalk died. And then
	  there was that odd application Dedicated to the Polish tongue.
	  app_saycountpl was subsumed by Say; One could say its bell was
	  rung. To read and parse a file from the dialplan You could (I
	  guess) use an application. app_readfile did fill that purpose,
	  but I think A function is perhaps better in its creation. Barging
	  is rude, I'm not sure why we do it. Inwardly, the caller will
	  probably sigh. But if you really must do it, Don't use
	  app_dahdibarge, use ChanSpy. We all despise the sound of tinny
	  robots It makes our queues so cold. To control such an
	  abomination It's better to not use Wait/SetMusicOnHold. It's
	  often nice to know properties of a channel It makes our calls
	  right We have a nice function called CHANNEL And so SIPCHANINFO
	  is sent off into the night. And now things get odd; Apparently
	  one could delimit with a colon Properties from the SIPPEER
	  function! Commas are in; all others are done. Finally, a word on
	  pipes and commas. We're sorry. We can't say it enough. But those
	  compatibility options in asterisk.conf; To maintain them forever
	  was just too tough. This patch removes: * cdr_sqlite * chan_gtalk
	  * chan_jingle * chan_h323 * res_jabber * app_saycountpl *
	  app_readfile * app_dahdibarge It removes the following
	  applications/functions: * WaitMusicOnHold * SetMusicOnHold *
	  SIPCHANINFO It removes the colon delimiter from the SIPPEER
	  function. Finally, it also removes all compatibility options that
	  were configurable from asterisk.conf, as these all applied to
	  compatibility with Asterisk 1.4 systems. Review:
	  https://reviewboard.asterisk.org/r/3698/

2014-07-03 22:22 +0000 [r417933-417976]  Richard Mudgett <rmudgett@digium.com>

	* channels/sig_pri.h, channels/chan_dahdi.c,
	  configs/chan_dahdi.conf.sample, /, UPGRADE.txt,
	  channels/sig_pri.c: chan_dahdi: Add inband_on_setup_ack
	  compatibility option. The new inband_on_setup_ack option causes
	  Asterisk to assume inband audio may be present when a
	  SETUP_ACKNOWLEDGE message is received. Q.931 Section 5.1.3 says
	  that in scenarios with overlap dialing, when a dialtone is sent
	  from the network side, progress indicator 8 "Inband info now
	  available" MAY be sent to the CPE if no digits were received with
	  the SETUP. It is thus implied that the ie is mandatory if digits
	  came with the SETUP and dialtone is needed. This option should be
	  enabled, when the network sends dialtone and you want to hear it,
	  but the network doesn't send the progress indicator when needed.
	  NOTE: For Q.SIG setups this option should be enabled when
	  outgoing overlap dialing is also enabled because Q.SIG does not
	  send the progress indicator with the SETUP ACK. The commit
	  -r413714 (AST-1338) which causes this issue was dealing with a
	  SIP-to-ISDN interoperability issue. This commit is a merge of the
	  two patches indicated below. ASTERISK-23897 #close Reported by:
	  Pavel Troller Patches: pri-4.diff (license #6302) patch uploaded
	  by Pavel Troller jira_asterisk_23897_v11.patch (license #5621)
	  patch uploaded by rmudgett Review:
	  https://reviewboard.asterisk.org/r/3633/ ........ Merged
	  revisions 417956 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 417957 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 417958 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/ari/resource_channels.c, res/res_ari.c, main/manager.c, /:
	  res_ari: Fix some off-nominal paths just dropping the HTTP
	  connection. * Removed some incorrect newlines on ast_http_error()
	  messages in manager.c. * Removed an incorrect newline in
	  res_ari_channels.c. Addendum to ASTERISK-23552 ........ Merged
	  revisions 417932 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-03 17:34 +0000 [r417910-417916]  Jonathan Rose <jrose@digium.com>

	* CHANGES, channels/chan_dahdi.c: chan_dahdi: Add AMI commands for
	  controlling PRI debugging output Adds the following AMI commands:
	  PRIDebugSet - Set PRI debug levels for a specific span
	  PRIDebugFileSet - Set the file used for PRI debug message output
	  PRIDebugFileUnset - Disables file output for PRI debug messages
	  Review: https://reviewboard.asterisk.org/r/3681/

	* CHANGES, pbx/pbx_config.c, main/pbx.c: pbx_config: Add manager
	  actions to add/remove extensions Adds two new manager commands to
	  pbx_config - DialplanExtensionAdd and DialplanExtensionRemove
	  which allow manager users to create and delete extensions
	  respectively. Review: https://reviewboard.asterisk.org/r/3650/

2014-07-03 17:16 +0000 [r417901]  Richard Mudgett <rmudgett@digium.com>

	* res/res_phoneprov.c, main/http.c, UPGRADE.txt,
	  include/asterisk/tcptls.h, res/res_http_post.c,
	  res/res_http_websocket.c, configs/http.conf.sample,
	  include/asterisk/http.h, main/tcptls.c, res/res_ari.c,
	  main/manager.c, /: HTTP: Add persistent connection support.
	  Persistent HTTP connection support is needed due to the increased
	  usage of the Asterisk core HTTP transport and the frequency at
	  which REST API calls are going to be issued. * Add http.conf
	  session_keep_alive option to enable persistent connections. *
	  Parse and discard optional chunked body extension information and
	  trailing request headers. * Increased the maximum
	  application/json and application/x-www-form-urlencoded body size
	  allowed to 4k. The previous 1k was kind of small. * Removed a
	  couple inlined versions of ast_http_manid_from_vars() by calling
	  the function. manager.c:generic_http_callback() and
	  res_http_post.c:http_post_callback() * Add missing va_end() in
	  ast_ari_response_error(). * Eliminated unnecessary RAII_VAR() use
	  in http.c:auth_create(). ASTERISK-23552 #close Reported by: Scott
	  Griepentrog Review: https://reviewboard.asterisk.org/r/3691/
	  ........ Merged revisions 417880 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-03 16:55 +0000 [r417900]  Matthew Jordan <mjordan@digium.com>

	* main/tcptls.c, configure, include/asterisk/autoconfig.h.in,
	  configure.ac: main/tcptls: Add checks for OpenSSL Elliptic Curve
	  support The patch for ASTERISK-23905 that added PFS support in
	  Asterisk depends on the elliptic curve library support being
	  present in OpenSSL. As it turns out, some versions of OpenSSL
	  don't have this library - notably the version running on our
	  build agents. This patch fixes the build by providing a configure
	  check for the specific library calls that the PFS patch relies
	  on. Review: https://reviewboard.asterisk.org/r/3709/

2014-07-03 16:14 +0000 [r417877-417879]  sgalarneau <sgalarneau@localhost>:

	* res/ari/resource_events.h, rest-api/api-docs/channels.json,
	  res/ari/resource_channels.h, rest-api/api-docs/events.json, /:
	  ARI: Improvements to body parameters documentation The variables
	  body parameter under the originate and originate with id
	  operations of the channel resource showed invalid JSON in its
	  description. The variables body parameter under the userEvent
	  operation of the event resource made no mention that the custom
	  key/value pairs should be wrapped in a variables key in order to
	  be added to the custom user event. ASTERISK-23975 #close Review:
	  https://reviewboard.asterisk.org/r/3692/ ........ Merged
	  revisions 417878 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* rest-api-templates/api.wiki.mustache,
	  rest-api-templates/swagger_model.py, /: api.wiki.mustache: Update
	  wiki template to support body parameters This patch updates the
	  api.wiki.mustache template and the swagger_model python script to
	  understand if an operation has a body parameter. If an operation
	  does have a body parameter, it will now be displayed in the
	  corresponding wiki entry. ........ Merged revisions 407389 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-03 14:08 +0000 [r417863]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, contrib/scripts/dahdi_span_config_hook (added):
	  dahdi_span_config_hook: automatically register new dahdi channels
	  Install a hook script for DAHDI to register new spans with
	  Asterisk automatically by running: asterisk -rx 'dahdi create
	  channel FIRST LAST' Review:
	  https://reviewboard.asterisk.org/r/3157/

2014-07-03 12:10 +0000 [r417800-417803]  Matthew Jordan <mjordan@digium.com>

	* main/tcptls.c, CHANGES: main/tcptls: Add support for Perfect
	  Forward Secrecy This patch enables Perfect Forward Secrecy (PFS)
	  in Asterisk's core TLS API. Modules that wish to enable PFS
	  should consider the following: - Ephemeral ECDH (ECDHE) is
	  enabled by default. To disable it, do not specify a ECDHE cipher
	  suite in a module's configuration, for example:
	  tlscipher=AES128-SHA:DES-CBC3-SHA - Ephemeral DH (DHE) is
	  disabled by default. To enable it, add DH parameters into the
	  private key file, i.e., tlsprivatekey. For an example, see the
	  default dh2048.pem at
	  http://www.opensource.apple.com/source/OpenSSL098/OpenSSL098-35.1/src/apps/dh2048.pem?txt
	  - Because clients expect the server to prefer PFS, and because
	  OpenSSL sorts its cipher suites by bit strength, (see "openssl
	  ciphers -v DEFAULT") consider re-ordering your cipher suites in
	  the conf file. For example:
	  tlscipher=AES128+kEECDH:AES128+kEDH:3DES+kEDH:AES128-SHA:DES-CBC3-SHA:-ADH:-AECDH
	  will use PFS when offered by the client. Clients which do not
	  offer PFS fall-back to AES-128 (or even 3DES as recommend by RFC
	  3261). Review: https://reviewboard.asterisk.org/r/3647/
	  ASTERISK-23905 #close Reported by: Alexander Traud patches:
	  tlsPFS_for_HEAD.patch uploaded by Alexander Traud (License 6520)
	  tlsPFS.patch uploaded by Alexander Traud (License 6520)

	* /, main/utils.c: main/untils: Prevent potential infinite loop in
	  ast_careful_fwrite A loop in ast_careful_fwrite exists that will
	  continually attempt to write to a file stream, even in the
	  presence of EAGAIN/EINTR errors. However, if a connection that
	  uses ast_careful_fwrite closes suddenly, ast_careful_fwrite's
	  call to fflush may return EAGAIN/EINTER along with EOF. A
	  subsequent call to fflush will return EOF but not clear errno,
	  resulting in an infinite loop. This patch clears errno after it
	  is detected and handled the loop, such that any subsequent call
	  to fflush will not get erroneously stuck. Review:
	  https://reviewboard.asterisk.org/r/3704 #ASTERISK-23984 #close
	  Reported by: Steve Davies patches: fflush_loop_fix uploaded by
	  one47 (License 5012) ........ Merged revisions 417797 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 417798 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 417799 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-02 21:13 +0000 [r417770]  Jonathan Rose <jrose@digium.com>

	* res/ari/resource_events.h, res/ari/resource_asterisk.h,
	  res/ari/resource_applications.h, res/ari/resource_playbacks.h,
	  res/ari/resource_channels.h, res/ari/resource_sounds.h, /,
	  res/ari/resource_bridges.h, res/ari/resource_recordings.h,
	  rest-api-templates/ari_resource.h.mustache,
	  res/ari/resource_device_states.h, res/ari/resource_endpoints.h,
	  res/ari/resource_mailboxes.h: ARI: Remove unnecessary \briefs
	  from automatically generated documentation Review:
	  https://reviewboard.asterisk.org/r/3440/ ........ Merged
	  revisions 412653 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-07-01 14:42 +0000 [r417679-417706]  Joshua Colp <jcolp@digium.com>

	* /, res/res_rtp_asterisk.c: res_rtp_asterisk: Don't leak memory or
	  reset state if DTLS configuration is set multiple times. ........
	  Merged revisions 417705 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_rtp_asterisk.c,
	  contrib/ast-db-manage/config/versions/51f8cb66540e_add_further_dtls_options.py
	  (added), include/asterisk/res_pjsip_session.h, main/rtp_engine.c,
	  /, channels/chan_sip.c, main/sdp_srtp.c, res/res_pjsip_sdp_rtp.c,
	  res/res_pjsip/pjsip_configuration.c, configs/sip.conf.sample,
	  include/asterisk/rtp_engine.h, res/res_pjsip.c,
	  channels/sip/include/sip.h, include/asterisk/res_pjsip.h,
	  include/asterisk/sdp_srtp.h: Recorded merge of revisions 417677
	  from http://svn.asterisk.org/svn/asterisk/branches/11 ........
	  res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS
	  negotiation on RTCP. This change fixes up DTLS support in
	  res_rtp_asterisk so it can accept and provide a SHA-256
	  fingerprint, so it occurs on RTCP, and so it occurs after ICE
	  negotiation completes. Configuration options to chan_sip and
	  chan_pjsip have also been added to allow behavior to be tweaked
	  (such as forcing the AVP type media transports in SDP).
	  ASTERISK-22961 #close Reported by: Jay Jideliov Review:
	  https://reviewboard.asterisk.org/r/3679/ Review:
	  https://reviewboard.asterisk.org/r/3686/ ........ Merged
	  revisions 417678 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-30 18:39 +0000 [r417663]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_pubsub.c: Reverse logic during subscription
	  persistence recreation. In the abstraction effort, this bit of
	  logic got messed up. We want to recreate the persistence if
	  things go well, not if things fail.

2014-06-30 13:02 +0000 [r417590-417649]  Matthew Jordan <mjordan@digium.com>

	* apps/app_voicemail.c: apps/app_voicemail: Fix compilation error
	  introduced in r417591 Not sure why that change to
	  ast_channel_alloc was made but ... okay.

	* apps/app_voicemail.c, main/say.c, CHANGES: app_voicemail, say:
	  Add support for Japanese Language This patch adds support for the
	  Japanese language to both the say family of applications, as well
	  as for VoiceMail and VoiceMailMain. A new pack of language sounds
	  will be released at the same time as the next major version of
	  Asterisk to support the new language features. The language
	  features can be enabled using a language code of 'ja'. Review:
	  https://reviewboard.asterisk.org/r/3477 ASTERISK-23324 #close
	  Reported by: Kevin McCoy patches:
	  app_voicemail.c.20140226.jb.patch uploaded by Kevin McCoy
	  (License 6586) say.c.20140226.jb.patch uploaded by Kevin McCoy
	  (License 6586)

	* /, channels/chan_sip.c: chan_sip: be more tolerant of whitespace
	  between attributes in SDP fmtp line This patch is essentially a
	  backport of a small portion of r397526 from ASTERISK-21981. In
	  that patch, pass through support and format attribute negotiation
	  was added for Opus. Part of that included being more tolerant to
	  whitespace in the fmtp line of an SDP; that part of the patch is
	  being applied here. As the author of the backport pointed out, in
	  SDP, the fmtp line is allowed to include whitespace between
	  attributes. RFC 3267 chapter 8.3 (from 2001) includes an example
	  for this. This was not removed in the updated RFC 4867 in 2007.
	  Review: https://reviewboard.asterisk.org/r/3658 #ASTERISK-23916
	  #close Reported by: Alexander Traud patches:
	  sdpFMTPspace_Asterisk11.patch uploaded by Alexander Traud
	  (License 6520) ........ Merged revisions 417587 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 417588 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 417589 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-27 23:21 +0000 [r417571]  Richard Mudgett <rmudgett@digium.com>

	* /, main/event.c: event.c: Fix type mismatch errors in ie_maps[].
	  In v12+ the type values from the table are only used by the CEL
	  unit tests. Since the unit tests were only comparing a generated
	  expected event with a real event to see if the ie contents
	  matched and using the same table IE_PLTYPE values to read the
	  event contents, the type mismatches were not detected. ........
	  Merged revisions 417565 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-27 19:27 +0000 [r417485-417511]  Corey Farrell <git@cfware.com>

	* /, main/astobj2.c: Ensure REF_DEBUG records entrys for attempts
	  to ao2_ref an invalid object This change ensures that
	  __ao2_ref_debug writes to ref_log when given a non-NULL pointer
	  to an invalid ao2 object. This is to ensure that we record any
	  attempt manipulate references of already freed objects.
	  ASTERISK-23948 #close Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3677/ ........ Merged
	  revisions 417500 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 417505 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 417509 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, contrib/scripts/refcounter.py: refcounter.py: prevent use of
	  excessive RAM with large refs logs When processing a 212MB refs
	  file, refcounter.py used over 3GB of RAM. This change greatly
	  reduces memory usage in two ways: * Saving object history in
	  whole lines instead of separated values. * Not saving
	  normal/skewed/leaked object lists unless they are requested.
	  ASTERISK-23921 #close Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3668/ ........ Merged
	  revisions 417480 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 417481 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 417483 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-27 13:50 +0000 [r417461]  Matthew Jordan <mjordan@digium.com>

	* res/res_pjsip/pjsip_configuration.c, res/res_pjsip_pubsub.c,
	  res/res_pjsip_registrar.c, include/asterisk/res_pjsip.h, /,
	  res/res_pjsip_outbound_registration.c: res_pjsip: Add ActionID to
	  events created as a result of PJSIP AMI actions A number of
	  various PJSIP AMI actions were failing to parse out and place the
	  ActionID into their responses. This patch updates the various
	  PJSIP actions such that the passed in ActionID is emitted on any
	  event list complete events, as well as any intermediate events
	  created as a result of the action. #ASTERISK-23947 #close
	  Reported by: Mark Michelson Review:
	  https://reviewboard.asterisk.org/r/3675/ ........ Merged
	  revisions 417460 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-27 02:04 +0000 [r417423-417447]  Kinsey Moore <kmoore@digium.com>

	* tests/test_cel.c: CEL: Update unit tests for bridge tech field
	  Update the CEL unit tests that handle BRIDGE_ENTER and
	  BRIDGE_EXIT events to expect the "bridge_technology" extra field
	  key.

	* CHANGES: CHANGES: Add missing changes Add missing CHANGES changes
	  from r417361 and r417383.

2014-06-26 18:27 +0000 [r417400-417421]  Matthew Jordan <mjordan@digium.com>

	* res/res_http_websocket.exports.in, /: res_http_websocket: Export
	  symbol for ast_websocket_set_timeout Thanks to Sean Bright for
	  pointing out that this was missed in #asterisk-dev. ........
	  Merged revisions 417419 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 417420 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_pjsip.c, /: chan_pjsip: Add a test event for fast
	  picture updates This will drive the test on review r3419. Note
	  that the patch for this was done by Ben Ford, although it was
	  slightly modified for this commit. ASTERISK-23562 Reported by:
	  Matt Jordan ........ Merged revisions 417399 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-26 14:48 +0000 [r417361-417383]  Kinsey Moore <kmoore@digium.com>

	* main/cel.c: CEL: Add bridge tech to relevant CEL records Add the
	  "bridge_technology" extra field key to BRIDGE_ENTER and
	  BRIDGE_EXIT CEL events to convey the bridge technology in use at
	  the time the record was generated.

	* main/bridge.c, include/asterisk/channel.h,
	  include/asterisk/bridge_features.h,
	  tests/test_channel_feature_hooks.c (added),
	  main/bridge_channel.c, main/channel.c: Bridging: Allow channels
	  to define bridging hooks This patch allows the current owner of a
	  channel to define various feature hooks to be made available once
	  the channel has entered a bridge. This includes any hooks that
	  are setup on the ast_bridge_features struct such as DTMF hooks,
	  bridge event hooks (join, leave, etc.), and interval hooks.
	  Review: https://reviewboard.asterisk.org/r/3649/

2014-06-26 12:43 +0000 [r417317-417360]  Matthew Jordan <mjordan@digium.com>

	* CHANGES, apps/app_jack.c: app_jack: Support audio with a sampling
	  rate higher than 8kHz This patch enables the jack-audiohook to
	  cope with dynamic sampling rates from and to Asterisk.
	  Information from the channel is taken to derive the channel's
	  sampling rate, suiting SLINxx format and frame->datalen. There
	  are stil a few limitations after this patch: * Required
	  information is taken from the channel during initialization as
	  the audiohook does not provide this information.
	  Audiohook.internal_sampl_rate(...) is set later, but no callback
	  is available to inform app_jack. * Frame.datalen is computed
	  using "rate / 50" assuming a ptime of 20ms. There is no internal
	  API available to determine datalen for a SLINxx. * Ringbuffer
	  size is now dynamic depending on the value of frame.datalen (see
	  above) and the number of frames, which are in
	  RINGBUFFER_FRAME_CAPACITY, that need to fit. Review:
	  https://reviewboard.asterisk.org/r/3618 Note that the patch being
	  committed here is based on the patch posted on ASTERISK-23836.
	  However, Matthis Schmieder also provided a patch to enable this
	  functionality, and that patch is noted below. ASTERISK-20696
	  #close Reported by: Matthis Schmieder patches: app_jack.patch
	  uploaded by Matthis Schmieder (License 6445) ASTERISK-23836
	  #close Reported by: Dennis Guse patches: patch-app_jack.c
	  uploaded by Dennis Guse (License 6513)

	* main/udptl.c, /: udptl: Correct FEC to not consider negative
	  sequence numbers as missing When using FEC, with span=3 and
	  entries=4 Asterisk will attempt to repair the packet with
	  sequence number 5, as it will see that packet -4 is missing. The
	  result is Asterisk sending garbage packets that can kill a fax.
	  This patch adds a check to see if the sequence number is valid
	  before checking if the packet is missing. Review:
	  https://reviewboard.asterisk.org/r/3657/ #ASTERISK-23908 #close
	  Reported by: Torrey Searle patches: udptl_fec.patch uploaded by
	  Torrey Searle (License 5334) ........ Merged revisions 417318
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 417320 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 417324 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/ari/internal.h, configs/ari.conf.sample,
	  res/res_http_websocket.c, res/res_pjsip.c,
	  configs/pjsip.conf.sample, include/asterisk/http_websocket.h,
	  configs/sip.conf.sample, res/res_pjsip/config_transport.c,
	  res/ari/ari_websockets.c, res/res_pjsip_transport_websocket.c,
	  res/ari/config.c, channels/sip/include/sip.h,
	  include/asterisk/res_pjsip.h, res/res_ari.c, /,
	  channels/chan_sip.c, UPGRADE.txt: res_http_websocket: Close
	  websocket correctly and use careful fwrite When a client takes a
	  long time to process information received from Asterisk, a write
	  operation using fwrite may fail to write all information. This
	  causes the underlying file stream to be in an unknown state, such
	  that the socket must be disconnected. Unfortunately, there are
	  two problems with this in Asterisk's existing websocket code: 1.
	  Periodically, during the read loop, Asterisk must write to the
	  connected websocket to respond to pings. As such, Asterisk
	  maintains a reference to the session during the loop. When
	  ast_http_websocket_write fails, it may cause the session to
	  decrement its ref count, but this in and of itself does not break
	  the read loop. The read loop's write, on the other hand, does not
	  break the loop if it fails. This causes the socket to get in a
	  'stuck' state, preventing the client from reconnecting to the
	  server. 2. More importantly, however, is that the fwrite in
	  ast_http_websocket_write fails with a large volume of data when
	  the client takes awhile to process the information. When it does
	  fail, it fails writing only a portion of the bytes. With some
	  debugging, it was shown that this was failing in a similar
	  fashion to ASTERISK-12767. Switching this over to
	  ast_careful_fwrite with a long enough timeout solved the problem.
	  Note that this version of the patch, unlike r417310 in Asterisk
	  11, exposes configuration options beyond just chan_sip's
	  sip.conf. Configuration options to configure the write timeout
	  have also been added to pjsip.conf and ari.conf. #ASTERISK-23917
	  #close Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3624/ ........ Merged
	  revisions 417310 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 417311 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-26 10:06 +0000 [r417251]  Corey Farrell <git@cfware.com>

	* /, channels/chan_sip.c: chan_sip: Fix handling of "From" headers
	  longer than 256 characters From headers were processed using a
	  256 character buffer on the stack. This change replaces that with
	  a heap allocation by ast_strdup. ASTERISK-23790 #close Reported
	  by: uniken1 Tested by: uniken1 Review:
	  https://reviewboard.asterisk.org/r/3669/ Patches:
	  chan_sip-large-from-header-1.8-r3.patch uploaded by wdoekes
	  (license 5674) ........ Merged revisions 417248 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 417249 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 417250 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-25 20:57 +0000 [r417233]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_pubsub.c, res/res_pjsip_exten_state.c,
	  include/asterisk/res_pjsip_pubsub.h,
	  res/res_pjsip_pidf_body_generator.c,
	  res/res_pjsip_pubsub.exports.in, res/res_pjsip_mwi.c,
	  res/res_pjsip_xpidf_body_generator.c: Abstract PJSIP-specific
	  elements from the pubsub API. This helps to pave the way for RLS
	  work that is to come. Since this is a self-contained change and
	  subscription tests still pass, this work is being committed
	  directly to trunk instead of a working branch. ASTERISK-23865
	  #close Review: https://reviewboard.asterisk.org/r/3628

2014-06-25 18:57 +0000 [r417213]  Corey Farrell <git@cfware.com>

	* main/astobj2_container.c, /: ao2_container node object ignores
	  REF_DEBUG in all places except one Almost every reference
	  operation against container node's uses __ao2_alloc or __ao2_ref,
	  thereby preventing ref logging for the nodes. One node reference
	  is released with ao2_t_ref, causing refcounter.py to falsely
	  report skews and leaks for many nodes. ASTERISK-23922 #close
	  Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3670/ ........ Merged
	  revisions 417212 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-25 00:45 +0000 [r417193]  Damien Wedhorn <voip@facts.com.au>

	* channels/chan_skinny.c: Skinny: cleanup some log messages around
	  sessions.

2014-06-24 02:50 +0000 [r417167]  Corey Farrell <git@cfware.com>

	* include/asterisk/netsock.h, main/utils.c, main/netsock.c,
	  include/asterisk/res_pjsip_session.h: Move eid functions to
	  utils.c, mark netsock.h deprecated Move eid functions from
	  netsock.c to utils.c. These functions were already published by
	  utils.h. Flag netsock.h as deprecated and switch
	  res_pjsip_session.h to use netsock2.h. The only code that still
	  uses netsock.h is chan_iax2. ASTERISK-23920 #close Reported by:
	  Corey Farrell Review: https://reviewboard.asterisk.org/r/3661/

2014-06-23 18:50 +0000 [r417143]  Joshua Colp <jcolp@digium.com>

	* /, res/res_rtp_asterisk.c: res_rtp_asterisk: Return the length of
	  data written when sending via ICE instead of 0. ASTERISK-23834
	  #close Reported by: Richard Kenner ........ Merged revisions
	  417141 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........ Merged revisions 417142 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-23 16:04 +0000 [r417120]  Richard Mudgett <rmudgett@digium.com>

	* /, main/core_unreal.c: core_unreal: Fix off by one buffer
	  overwrite error. Appending the ;2 to the user supplied ;1
	  uniqueid to create the ;2 version if the user did not also supply
	  an extra uniqueid for the ;2 channel resulted in allocating a
	  buffer that was one byte too small. * Fix off by one error in
	  ast_unreal_new_channels() when generating the ;2 uniqueid from
	  the user suppled ;1 version. * Pulled some long assignment lines
	  from if tests to improve line break readability in
	  ast_unreal_new_channels(). ........ Merged revisions 417119 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-23 07:44 +0000 [r417059]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* channels/sig_pri.c, channels/sig_pri.h, channels/chan_dahdi.c:
	  suspended destructions of pri spans on events If a DAHDI span
	  disappears, we wish for its representation in Asterisk to be
	  destroyed as well. The information about the span's removal may
	  come from several paths: 1. DAHDI sends DAHDI_EVENT_REMOVE on
	  every channel. 2. An extra DAHDI_EVENT_REMOVED is sent on every
	  subsequent call to DAHDI_GET_EVENT. 3. Every read (including the
	  internal one by libpri on the D-channel) returns -ENODEV.
	  Asterisk responsds to DAHDI_EVENT_REMOVE on a channel by
	  destroying it. Destroying a channel requires holding the channel
	  list lock (iflock). Destroying a channel that is part of a span
	  requires holding the span's lock. Destroying a channel from a
	  context that holds the span lock, while at the same time another
	  channel is destroyed directly, leads to a deadlock. Solution:
	  don't destroy span while holding the channels list lock. Thus
	  changes in this patch: * Deferring removal of PRI spans in
	  response to events: doomed spans are collected on a list. *
	  Doomed spans are removed periodically by the monitor thread. *
	  ENODEV reads from the D-channel will warant the same deferred
	  removal. Review: https://reviewboard.asterisk.org/r/3548/

2014-06-22 18:53 +0000 [r416996]  George Joseph <george.joseph@fairview5.com>

	* include/asterisk/astobj2.h, Makefile.rules, Makefile, /: astobj2:
	  Add an ao2_replace macro to astobj2.h This macro replaces one
	  object reference with another cleaning up the original. param dst
	  Pointer to the object that will be cleaned up. param src Pointer
	  to the object replacing it. src's ref count is bumped if it's
	  non-NULL. dst's ref count is decremented if it's non-NULL. src is
	  assigned to dst, This patch was reviewed on IRC by coreyfarrell
	  and mjordan. Tested by: George Joseph ........ Merged revisions
	  416995 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-20 23:18 +0000 [r416872-416935]  George Joseph <george.joseph@fairview5.com>

	* /, configure, include/asterisk/autoconfig.h.in: build: Allow
	  autoconf/ast_ext_tool_check to handle cross-compiling better.
	  ast_ext_tool_check.m4 isn't handling cases where a path to a
	  package is provided (E.G. --with-mysqlclient=/some/sysroot) and
	  the package has a config tool (E.G. mysql_config) and the package
	  has its own subdirectories in include or lib. For example,
	  mysql's libraries are in ${MYSQLCLIENT_DIR}/usr/lib/mysql but
	  ast_ext_tool_check sets MYSQLCLIENT_LIB to
	  ${MYSQLCLIENT_DIR}/usr/lib. libxml2 has the same problem with its
	  includes. They're in ${LIBXML2_DIR}/usr/include/libxml2 not
	  directly in ${LIBXML2_DIR}/usr/include. Both cause configure to
	  fail and there are others in the same boat. The problem is caused
	  by logic in ast_ext_tool_check that overrides the result of the
	  config tool's --cflags and --libs options if package_DIR is set.
	  This patch prepends package_DIR (if specified) to the -L and -I
	  results from the package's config tool instead of overriding
	  them. A regenerated ./configure and
	  include/asterisk/autoconfig.h.in are included but can be
	  regenerated by running ./bootstrap.sh at any time. Tested by:
	  George Joseph Tested by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3550/ ........ Merged
	  revisions 416929 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 416930 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416931 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* autoconf/ast_ext_tool_check.m4, /: build: Allow
	  autoconf/ast_ext_tool_check to handle cross-compiling better.
	  ast_ext_tool_check.m4 isn't handling cases where a path to a
	  package is provided (E.G. --with-mysqlclient=/some/sysroot) and
	  the package has a config tool (E.G. mysql_config) and the package
	  has its own subdirectories in include or lib. For example,
	  mysql's libraries are in ${MYSQLCLIENT_DIR}/usr/lib/mysql but
	  ast_ext_tool_check sets MYSQLCLIENT_LIB to
	  ${MYSQLCLIENT_DIR}/usr/lib. libxml2 has the same problem with its
	  includes. They're in ${LIBXML2_DIR}/usr/include/libxml2 not
	  directly in ${LIBXML2_DIR}/usr/include. Both cause configure to
	  fail and there are others in the same boat. The problem is caused
	  by logic in ast_ext_tool_check that overrides the result of the
	  config tool's --cflags and --libs options if package_DIR is set.
	  This patch prepends package_DIR (if specified) to the -L and -I
	  results from the package's config tool instead of overriding
	  them. Tested by: George Joseph Tested by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3550/ ........ Merged
	  revisions 416870 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416871 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-20 20:57 +0000 [r416848-416850]  Jonathan Rose <jrose@digium.com>

	* res/parking/parking_manager.c, /: res_parking: Make manager
	  commands register with module information Previously module
	  information was not included due to an oversight. Review:
	  https://reviewboard.asterisk.org/r/3626/ ........ Merged
	  revisions 416849 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/logger.c, CHANGES, include/asterisk/logger.h,
	  main/manager.c: Logger: Add manager command 'LoggerRotate' to
	  rotate logger Part of a series of AMI command equivalents to
	  existing CLI commands Review:
	  https://reviewboard.asterisk.org/r/3651/

2014-06-20 17:06 +0000 [r416830]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_voicemail.c, include/asterisk/app.h, main/app.c,
	  apps/app_directory.c, apps/app_chanspy.c: voicemail API
	  callbacks: Extract the sayname API call to its own registerd
	  callback. * Extract the sayname API call to its own registerd
	  callback. This allows the app_directory and app_chanspy
	  applications to say a mailbox owner's name using an alternate
	  provider when app_voicemail is not available because you are
	  using res_mwi_external. app_directory still uses the
	  voicemail.conf file. AFS-64 #close Reported by: Mark Michelson

2014-06-20 15:27 +0000 [r416738-416807]  George Joseph <george.joseph@fairview5.com>

	* main/astobj2_private.h, main/astobj2_container_private.h,
	  main/astobj2_container.c, main/astobj2_hash.c,
	  main/astobj2_rbtree.c, build_tools/cflags.xml, /,
	  tests/test_astobj2.c: astobj2: Additional refactoring to push
	  impl specific code down into the impls. Move some implementation
	  specific code from astobj2_container.c into astobj2_hash.c and
	  astobj2_rbtree.c. This completely removes the need for
	  astobj2_container to switch on RTTI and it no longer has any
	  knowledge of the implementation details. Also adds AO2_DEBUG as a
	  new compile option in menuselect which controls astobj2 debugging
	  independently of AST_DEVMODE and REF_DEBUG. Tested by: George
	  Joseph Review: https://reviewboard.asterisk.org/r/3593/ ........
	  Merged revisions 416806 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_endpoint_identifier_ip.c, main/acl.c,
	  include/asterisk/netsock2.h, include/asterisk/acl.h,
	  main/netsock2.c: pjsip cli: Change Identify to show CIDR notation
	  instead of netmasks. * Added ast_sockaddr_cidr_bits() to count
	  the 1 bits in an ast_sockaddr. * Added ast_ha_join_cidr() which
	  uses ast_sockaddr_cidr_bits() for the netmask instead of
	  ast_sockaddr_stringify_addr. * Changed
	  res_pjsip_endpoint_identifier_ip to call ast_ha_join_cidr()
	  instead of ast_ha_join() for the CLI output. This is a CLI change
	  only. AMI was not affected. Tested by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3652/ ........ Merged
	  revisions 416737 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-19 19:40 +0000 [r416736]  Kinsey Moore <kmoore@digium.com>

	* /, main/bridge.c, res/parking/parking_tests.c,
	  channels/sip/reqresp_parser.c, main/logger.c, main/test.c: Fix
	  build warnings with TEST_FRAMEWORK enabled ........ Merged
	  revisions 416732 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 416733 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416734 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-19 16:04 +0000 [r416589-416670]  George Joseph <george.joseph@fairview5.com>

	* pbx/pbx_lua.c, /: Remove the problematic and unneeded
	  AST_MODFLAG_GLOBAL_SYMBOLS from pbx_lua.c
	  AST_MODFLAG_GLOBAL_SYMBOLS was causing the module to be
	  incorrectly loaded before pbx_config. pbx_config was therefore
	  blowing away contexts that were created by pbx_lua. With
	  AST_MODFLAG_DEFAULT the load order is now correct and contexs are
	  being properly merged. AST_MODFLAG_GLOBAL_SYMBOLS was not needed
	  anyway since no other modules needed its global symbols that
	  early. ASTERISK-23818 #close Reported by: Dennis Guse Tested by:
	  Dennis Guse Tested by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3629/ ........ Merged
	  revisions 416668 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416669 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* configs/extensions.lua.sample, /: Update extensions.lua.sample
	  with naming conflict guidance. The sample extensions.lua was
	  causing pbx_lua to fail to load when parsing 'app.goto("default",
	  "s", 1)' because in Lua 5.2, 'goto' is now a reserved word. This
	  patch adds guidance to extensions.lua.sample and changed
	  'app.goto("default", "s", 1)' to 'app.['goto']("default", "s",
	  1)'. ASTERISK-23844 #close Reported by: rnewton Tested by:
	  gtjoseph Review: https://reviewboard.asterisk.org/r/3627/
	  ........ Merged revisions 416581 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416582 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-18 04:22 +0000 [r416561]  Matthew Jordan <mjordan@digium.com>

	* /, main/stasis_channels.c: stasis_channels: Update the stasis
	  cache if manager variables are needed In r416211, the publishing
	  of variable changes was modified such that a cached channel
	  snapshot was used if manager variables were not requested with
	  each AMI event. This was done to reduce the amount of channel
	  snapshots created. However, an assumption was made that
	  generating a channel snapshot and publishing the snapshot to the
	  channel topic was sufficient to ensure that the cache would be
	  updated; this is not the case. The channel snapshot type must be
	  used to force a snapshot update. This patch updates the
	  publication of channel variables such that the cache is updated
	  prior to publication of the channel variable message if manager
	  variables are in use. This ensures that all AMI events receive
	  the variable update when they are supposed to. Note that this
	  issue was caught by the Asterisk Test Suite (go go testing)
	  ........ Merged revisions 416557 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-17 18:45 +0000 [r416444-416503]  Mark Michelson <mmichelson@digium.com>

	* /, funcs/func_strings.c: Allow the PUSH and UNSHIFT functions to
	  set inheritable channel variables. ........ Merged revisions
	  416500 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 416501 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416502 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_pidf_body_generator.c, /,
	  res/res_pjsip_xpidf_body_generator.c: Fix string growth algorithm
	  for XML presence bodies. pjpidf_print() does not return < 0 if
	  there is not enough room for the document to be printed. Rather,
	  it returns 39, the length of the XML prolog. The algorithm also
	  had a bug in that it would return if it attempted to grow the
	  string larger. ........ Merged revisions 416442 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-17 16:33 +0000 [r416443]  Kinsey Moore <kmoore@digium.com>

	* res/res_musiconhold.c, /: MoH: Don't restart stream on repeated
	  start calls Currently, music on hold will stop and then start
	  again from the beginning if ast_moh_start() is called multiple
	  times. This can happen if a call is put on hold repeatedly (the
	  channel receives multiple HOLD control frames) and can be
	  triggered from ARI by starting MoH on a channel multiple times.
	  This is fairly jarring/annoying to users. This change prevents
	  MoH from being restarted if the requested music class is the same
	  as the one currently playing. This includes an extra check to
	  prevent the errors previously experienced in the testsuite and
	  has 100+ test runs behind it. Review:
	  https://reviewboard.asterisk.org/r/3615/ ........ Merged
	  revisions 416439 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 416440 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416441 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-16 18:27 +0000 [r416416]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_dahdi.c, configs/chan_dahdi.conf.sample,
	  channels/sig_ss7.h, configure, channels/chan_dahdi.h,
	  configure.ac, UPGRADE.txt, configs/ss7.timers.sample (added),
	  CHANGES, channels/sig_ss7.c: chan_dahdi: Adds support for major
	  update to libss7. * SS7 support now requires libss7 v2.0 or
	  later. The new libss7 is not backwards compatible. * Added SS7
	  support for connected line and redirecting. * Most SS7 CLI
	  commands are reworked as well as new SS7 commands added. See
	  online CLI help. * Added several SS7 config option parameters
	  described in chan_dahdi.conf.sample. * ISUP timer support
	  reworked and now requires explicit configuration. See
	  ss7.timers.sample. Special thanks to Kaloyan Kovachev for his
	  support and persistence in getting the original patch by adomjan
	  updated and ready for release. SS7-27 #close Reported by: adomjan

2014-06-16 16:22 +0000 [r416394]  Kevin Harwell <kharwell@digium.com>

	* include/asterisk/http_websocket.h, tests/test_websocket_client.c,
	  res/res_http_websocket.c: res_http_websocket: read/write string
	  fixup There was a problem when reading a string from the
	  websocket. It assumed the received data had a null terminator and
	  tried to write the data to an ast_str. This of course could/would
	  read past the end of the given buffer while writing the data to
	  the internal buffer of ast_str. Modified the the code to
	  correctly place a null terminator on the result string.

2014-06-16 09:04 +0000 [r416339]  Igor Goncharovskiy <igor.goncharovsky@gmail.com>

	* cel/cel_sqlite3_custom.c, main/db.c, res/res_config_sqlite3.c,
	  cdr/cdr_sqlite3_custom.c, /: We have faced situation when using
	  CDR and CEL by sqlite3 modules. With system having high load
	  (~100 concurrent calls created by sipp) we found many cdr and cel
	  records missed. There is special finction in sqlite3, that make
	  able to fix this situation - sqlite3_wait_timeout, that also can
	  replace awful code cdr_sqlite3 ad cel_sqlite3 modules. Also this
	  function can be used for aastdb and res_config_sqlite3 to avoid
	  missed writes to sqlite db. #ASTERISK-23766 #close Reported by:
	  Igor Goncharovsky Review:
	  https://reviewboard.asterisk.org/r/3559/ ........ Merged
	  revisions 416336 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 416337 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416338 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-16 02:40 +0000 [r416267-416319]  Matthew Jordan <mjordan@digium.com>

	* /, channels/chan_sip.c: channels/chan_sip: Forbid remote bridging
	  if T.38 is negotiated When a framehook is removed - such as the
	  fax gateway framehook - the bridge framework will re-evaluate the
	  bridge mixing technologies to see if it can improve the bridging.
	  When this occurs, get_rtp_info will be called to determine if
	  local or remote bridging can be used. Using remote bridging will
	  cause a fax to fail, as direct media negotiation will cause some
	  small number of packets to not arrive at the remote endpoint.
	  This patch forces local native bridging if T.38 negotiation is in
	  progress or has been established. ........ Merged revisions
	  416318 from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/channel_internal_api.c: channel_internal_api: Publish a
	  snapshot change when linkedids change Snapshots are now not
	  published *quite* as much as they used to. One instance where
	  they are not published any longer is during bridge enter and exit
	  - the state of the channel doesn't change, the bridge does.
	  However, channels are changed when a linkedid is propagated;
	  previously, the channel's state would be updated and published
	  during the bridge enter event. Now this must be explicitly done.
	  ........ Merged revisions 416300 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, tests/test_stasis_endpoints.c: test_stasis_endpoints: Remove
	  expected channel snapshot We no longer publish a channel snapshot
	  when it is associated with an endpoint; after all, the channel
	  itself hasn't changed - the endpoint state has changed. This
	  updates the channel_messages unit test accordingly. ........
	  Merged revisions 416298 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_musiconhold.c: MoH: Undo commit r416150 (1.8) This
	  patch reverts r416150. When the comparison between mohclass->name
	  and state->class->name is made, you are not guaranteed that (a)
	  state->class is non-NULL or that state or state->class are in a
	  safe state. Crashes caught by the bridges/transfer_capabilities
	  test. ........ Merged revisions 416251 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 416252 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416255 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-14 19:26 +0000 [r416237]  Corey Farrell <git@cfware.com>

	* res/res_manager_devicestate.c, res/res_manager_presencestate.c:
	  res_manager_devicestate and res_manager_presencestate missing
	  support level Add MODULEINFO comment block to define support
	  level core for these new modules. Review:
	  https://reviewboard.asterisk.org/r/3620/

2014-06-13 18:24 +0000 [r416216]  Matthew Jordan <mjordan@digium.com>

	* res/res_agi.c, res/res_pjsip/pjsip_configuration.c,
	  main/stasis_channels.c, res/ari/resource_channels.c,
	  main/bridge_channel.c, main/pbx.c, main/stasis_cache.c, /,
	  apps/app_meetme.c, main/pickup.c, main/channel_internal_api.c,
	  include/asterisk/channel.h, main/core_local.c, main/aoc.c,
	  main/endpoints.c, main/cel.c, apps/app_queue.c,
	  main/stasis_bridges.c, apps/app_agent_pool.c, main/cli.c,
	  main/channel.c, main/dial.c, main/manager.c,
	  include/asterisk/stasis_channels.h: stasis: Reduce creation of
	  channel snapshots to improve performance During some performance
	  testing of Asterisk with AGI, ARI, and lots of Local channels, we
	  noticed that there's quite a hit in performance during channel
	  creation and releasing to the dialplan (ARI continue). After
	  investigating the performance spike that occurs during channel
	  creation, we discovered that we create a lot of channel snapshots
	  that are technically unnecessary. This includes creating
	  snapshots during: * AGI execution * Returning objects for ARI
	  commands * During some Local channel operations * During some
	  dialling operations * During variable setting * During some
	  bridging operations And more. This patch does the following: - It
	  removes a number of fields from channel snapshots. These fields
	  were rarely used, were expensive to have on the snapshot, and
	  hurt performance. This included formats, translation paths, Log
	  Call ID, callgroup, pickup group, and all channel variables. As a
	  result, AMI Status, "core show channel", "core show channelvar",
	  and "pjsip show channel" were modified to either hit the live
	  channel or not show certain pieces of data. While this is
	  unfortunate, the performance gain from this patch is worth the
	  loss in behaviour. - It adds a mechanism to publish a cached
	  snapshot + blob. A large number of publications were changed to
	  use this, including: - During Dial begin - During Variable
	  assignment (if no AMI variables are emitted - if AMI variables
	  are set, we have to make snapshots when a variable is changed) -
	  During channel pickup - When a channel is put on hold/unhold -
	  When a DTMF digit is begun/ended - When creating a bridge
	  snapshot - When an AOC event is raised - During Local channel
	  optimization/Local bridging - When endpoint snapshots are
	  generated - All AGI events - All ARI responses that return a
	  channel - Events in the AgentPool, MeetMe, and some in Queue -
	  Additionally, some extraneous channel snapshots were being made
	  that were unnecessary. These were removed. - The result of
	  ast_hashtab_hash_string is now cached in stasis_cache. This
	  reduces a large number of calls to ast_hashtab_hash_string, which
	  reduced the amount of time spent in this function in gprof by
	  around 50%. #ASTERISK-23811 #close Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/3568/ ........ Merged
	  revisions 416211 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-13 13:11 +0000 [r416149-416153]  Kinsey Moore <kmoore@digium.com>

	* res/res_musiconhold.c, /: MoH: Don't restart stream on repeated
	  start calls Currently, music on hold will stop and then start
	  again from the beginning if ast_moh_start() is called multiple
	  times. This can happen if a call is put on hold repeatedly (the
	  channel receives multiple HOLD control frames) and can be
	  triggered from ARI by starting MoH on a channel multiple times.
	  This is fairly jarring/annoying to users. This change prevents
	  MoH from being restarted if the requested music class is the same
	  as the one currently playing. Review:
	  https://reviewboard.asterisk.org/r/3615/ ........ Merged
	  revisions 416150 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 416151 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416152 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/cel.c, /: CEL: Expose parking retreiver in extra field This
	  exposes the retreiver of a parked call under the "retreiver" key
	  of the extra field when this information is available. Review:
	  https://reviewboard.asterisk.org/r/3608/ ........ Merged
	  revisions 416148 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-13 05:16 +0000 [r416071]  Richard Mudgett <rmudgett@digium.com>

	* main/http.c, include/asterisk/tcptls.h, main/tcptls.c,
	  main/manager.c, /, channels/chan_sip.c: AST-2014-007: Fix of fix
	  to allow AMI and SIP TCP to send messages. ASTERISK-23673 #close
	  Reported by: Richard Mudgett Review:
	  https://reviewboard.asterisk.org/r/3617/ ........ Merged
	  revisions 416066 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 416067 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 416070 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-12 21:27 +0000 [r416024]  Rusty Newton <rnewton@digium.com>

	* main/pbx.c: main/pbx - documentation - enhance 'core show hints'
	  and 'core show hint' help text Adds descriptive help text to
	  'core show hints' and 'core show hint'. The text describes the
	  various columns for the sake of clarity. It takes into account
	  recent changes to the content displayed by the commands
	  https://reviewboard.asterisk.org/r/3604/ and
	  https://reviewboard.asterisk.org/r/3611/. ASTERISK-23764 Review:
	  https://reviewboard.asterisk.org/r/3610/

2014-06-12 20:17 +0000 [r415982]  Kinsey Moore <kmoore@digium.com>

	* res/res_pjsip_pubsub.c, /: Fix build in devmode for GCC 4.10
	  ........ Merged revisions 415980 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-12 17:00 +0000 [r415907]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/utils.h, main/tcptls.c, main/manager.c, /,
	  channels/chan_sip.c, main/http.c, UPGRADE.txt, main/utils.c,
	  include/asterisk/tcptls.h, res/res_http_websocket.c,
	  configs/http.conf.sample: AST-2014-007: Fix DOS by consuming the
	  number of allowed HTTP connections. Simply establishing a TCP
	  connection and never sending anything to the configured HTTP port
	  in http.conf will tie up a HTTP connection. Since there is a
	  maximum number of open HTTP sessions allowed at a time you can
	  block legitimate connections. A similar problem exists if a HTTP
	  request is started but never finished. * Added http.conf
	  session_inactivity timer option to close HTTP connections that
	  aren't doing anything. Defaults to 30000 ms. * Removed the
	  undocumented manager.conf block-sockets option. It interferes
	  with TCP/TLS inactivity timeouts. * AMI and SIP TLS connections
	  now have better authentication timeout protection. Though I
	  didn't remove the bizzare TLS timeout polling code from chan_sip.
	  * chan_sip can now handle SSL certificate renegotiations in the
	  middle of a session. It couldn't do that before because the
	  socket was non-blocking and the SSL calls were not restarted as
	  documented by the OpenSSL documentation. * Fixed an off nominal
	  leak of the ssl struct in handle_tcptls_connection() if the FILE
	  stream failed to open and the SSL certificate negotiations
	  failed. The patch creates a custom FILE stream handler to give
	  the created FILE streams inactivity timeout and timeout after a
	  specific moment in time capability. This approach eliminates the
	  need for code using the FILE stream to be redesigned to deal with
	  the timeouts. This patch indirectly fixes most of ASTERISK-18345
	  by fixing the usage of the SSL_read/SSL_write operations.
	  ASTERISK-23673 #close Reported by: Richard Mudgett ........
	  Merged revisions 415841 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 415854 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415896 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-12 15:50 +0000 [r415839]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, apps/app_queue.c: app_queue: delayed state can cause early
	  leavewhenempty ringing In app_queue, device state changes arrive
	  in event messages and update the queue member status value. That
	  value is checked in get_member_status() to decide that the caller
	  should leave when there are no available members. Although event
	  messages can be delayed by other activity, there is no adverse
	  affect by lagged status except in one specific case: there is
	  only one available member, it was just rung, and leavewhenempty
	  is enabled set for ringing members. This change adds a direct
	  check of the device state only under this condition where the
	  caller may be dropped incorrectly, resolving this issue without
	  affecting performance of app_queue normally. AST-1248 #close
	  Review: https://reviewboard.asterisk.org/r/3595/ Reported by:
	  Thomas Arimont ........ Merged revisions 415833 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 415835 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415836 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-12 15:39 +0000 [r415834]  Jonathan Rose <jrose@digium.com>

	* apps/app_mixmonitor.c, /, UPGRADE.txt: MixMontior: Add class
	  authorization requirements to MixMonitor AMI commands MixMonitor
	  AMI commands StartMixMonitor and StopMixMonitor lacked class
	  authorization. StopMixMonitor now requires that the manager user
	  either have the call or system class authorization.
	  StartMixMonitor is a slightly larger issue since it can execute
	  shell commands if the right arguments are passed into it, and we
	  consider this a permission escalation. A security release will be
	  issued for problem this shortly. ASTERISK-23609 #close Reported
	  by: Corey Farrell ........ Merged revisions 415825 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415832 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-12 14:39 +0000 [r415813]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_pubsub.c, /: res_pjsip_pubsub: unauthenticated
	  remote crash in PJSIP pub/sub framework A remotely exploitable
	  crash vulnerability exists in the PJSIP channel driver's pub/sub
	  framework. If an attempt is made to unsubscribe when not
	  currently subscribed and the endpoint's "sub_min_expiry" is set
	  to zero, Asterisk tries to create an expiration timer with zero
	  seconds, which is not allowed, so an assertion raised. The fix
	  was to reject a subscription that is attempting to unsubscribe
	  when not being already subscribed. Asterisk now checks for this
	  situation appropriately and responds with a 400 instead of
	  crashing. AST-2014-005 ASTERISK-23489 #close ........ Merged
	  revisions 415812 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-12 14:15 +0000 [r415795]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip.c, /: Fix potential deadlock situation in
	  res_pjsip. SIP transaction timeouts are handled in the PJSIP
	  monitor thread. When this happens on a subscription, and the
	  subscription is destroyed, the subscription destruction is
	  dispatched synchronously to the threadpool. The issue is that the
	  PJSIP dialog is locked by the monitor thread, and then the
	  dispatched task attempts to lock the dialog. This leads to a
	  deadlock that causes SIP traffic to no longer be accepted on the
	  Asterisk server. The fix here is to treat the monitor thread as
	  if it were a threadpool thread when it attempts to dispatch
	  synchronous tasks. This way, the dispatched task turns into a
	  simple function call within the same thread, and the locking
	  issue is averted. AST-2014-008 ASTERISK-23802 #close ........
	  Merged revisions 415794 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-12 11:34 +0000 [r415767]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip.c, res/res_pjsip_pubsub.c,
	  res/res_pjsip_exten_state.c, include/asterisk/res_pjsip.h,
	  include/asterisk/res_pjsip_pubsub.h,
	  res/res_pjsip_pubsub.exports.in, /,
	  contrib/ast-db-manage/config/versions/c6d929b23a8_create_pjsip_subscription_persistence_.py
	  (added), res/res_pjsip_mwi.c: res_pjsip_pubsub: Persist
	  subscriptions in sorcery so they are recreated on startup. This
	  change makes res_pjsip_pubsub persist inbound subscriptions in
	  sorcery. By default this uses the local astdb but it can also be
	  configured to store within an outside database. When Asterisk is
	  started these subscriptions are recreated if they have not
	  expired. Notifications are sent to the devices which have
	  subscribed and they are none the wiser that the system has
	  restarted. Review: https://reviewboard.asterisk.org/r/3598/
	  ........ Merged revisions 415766 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-12 07:52 +0000 [r415749]  Walter Doekes <walter+asterisk@wjd.nu>

	* UPGRADE.txt, contrib/scripts/safe_asterisk, Makefile, /:
	  safe_asterisk: Overwrite old safe_asterisk on make install. From
	  now on, make install will overwrite safe_asterisk with the latest
	  version. You need to move any local modifications to files inside
	  /etc/asterisk/startup.d, if you have any. See also commits
	  r394939 and r397938. ASTERISK-21965 #close Patches:
	  safe_asterisk.patch uploaded by jkister (License 6232, modified
	  by me) ........ Merged revisions 415748 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-11 23:01 +0000 [r415730]  Richard Mudgett <rmudgett@digium.com>

	* main/format.c, /: format.c: Fix misuse of hash container
	  function. The supplied hash function to a container must be
	  idempotent given the object's key value to figure out which
	  container bucket the object belongs in. Returning a random number
	  or the current container count is not idempotent. The "computed
	  hash" value doesn't help find the object later in those cases. *
	  Fixed the format_list container to actually be a list since that
	  is how the container is used. Conceptually, if more than 283
	  formats were added to the format_list then odd things may have
	  happened before the fix. ........ Merged revisions 415728 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415729 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-11 20:22 +0000 [r415698-415715]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/pbx.c: CLI: correct presence information on core show hints
	  Adds presence to core show hint and changes presence string
	  conversion to use the correct function. ASTERISK-23858 #close
	  Review: https://reviewboard.asterisk.org/r/3611/

	* main/pbx.c: CLI: add presence information to core show hints Adds
	  presence state value to output of core show hints. Also reformats
	  the output slightly so it doesn't use as much space as it would
	  otherwise. Was: 1000@demo : SIP/1000 State:Unavailable Watchers 0
	  Now: 1000@demo : SIP/1000 State:Unavailable Presence:Idle
	  Watchers 0 AFS-53 #close Review:
	  https://reviewboard.asterisk.org/r/3604/

2014-06-10 18:32 +0000 [r415679]  Kinsey Moore <kmoore@digium.com>

	* main/channel.c, /: Fix build in dev mode due to signed/unsigned
	  mismatch ........ Merged revisions 415678 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-10 16:06 +0000 [r415659]  Jonathan Rose <jrose@digium.com>

	* main/message.c, /, res/res_pjsip_notify.c: PJSIP: PJSIPNotify -
	  Strip content-length headers and add documentation Documentation
	  for how to add custom headers/content to notifies created with
	  the PJSIPNotify manager action was a little sparse and it also
	  wasn't vetting application of Content-length headers like its
	  chan_sip equivalent was (so two Content-length headers could be
	  applied... and PJSIP determines the content length anyway, so it
	  just opens people up for error). This patch also flips the
	  variable order so that the variables are interpreted in the same
	  order as they are put in the AMI action. Review:
	  https://reviewboard.asterisk.org/r/3587/ ........ Merged
	  revisions 415658 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-10 09:28 +0000 [r415630]  Alexandr Anikin <may@telecom-service.ru>

	* addons/chan_ooh323.c, /: chan_ooh323: fix loading module failure
	  if there no accessible h323_log or ooh323 config file change
	  return 1 to return AST_MODULE_LOAD_FAILURE on module load routine
	  few cosmetic changes ASTERISK-23814 #close (closes issue
	  ASTERISK-23814) Reported by: Igor Goncharovsky Patches:
	  ASTERISK-23814-ast11.patch ........ Merged revisions 415599 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415602 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-09 20:21 +0000 [r415580]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_header_funcs.c, /: chan_pjsip: Fix bug where custom
	  SIP headers could be duplicated on outgoing INVITEs. When using
	  PJSIP_HEADER() to add custom headers to outgoing INVITE requests,
	  certain situations could result in the headers being duplicated.
	  For instance, if the request were retransmitted, or if the INVITE
	  were re-sent with authentication credentials, the custom headers
	  would be re-added to the request. The fix here is to, after
	  adding the custom headers to the outbound INVITE, remove the
	  datastore that holds the custom headers to add. This way, there
	  is no risk in accidentally adding them if the session supplement
	  is called into a second or third time. ........ Merged revisions
	  415579 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-09 12:12 +0000 [r415524]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, UPGRADE.txt, contrib/scripts/safe_asterisk: safe_asterisk:
	  Cleanup additions to r415132. * Replaced a stray echo that
	  should've been a message call in safe_asterisk. This replaces a
	  conditional log message by a slightly different message. Please
	  update your log parsing scripts. * Made the $NOTIFY mail Subject
	  more verbose by adding the machine name and exitstatus. (Note
	  that a 'make install' still won't overwrite your old
	  safe_asterisk if it exists. See ASTERISK-21965.) ASTERISK-23492
	  #close ........ Merged revisions 415521 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 415522 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415523 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-09 03:50 +0000 [r415466]  Corey Farrell <git@cfware.com>

	* /, main/autoservice.c: autoservice: stop thread on graceful
	  shutdown This change adds thread shutdown to autoservice for
	  graceful shutdowns only. ast_register_cleanup is backported to
	  1.8 to allow this. The logger callid is also released on shutdown
	  in 11+. ASTERISK-23827 #close Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3594/ ........ Merged
	  revisions 415463 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 415464 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415465 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-08 18:12 +0000 [r415444]  Matthew Jordan <mjordan@digium.com>

	* include/asterisk/channel.h, bridges/bridge_native_rtp.c,
	  main/bridge_channel.c, main/channel.c, main/pbx.c, /,
	  main/framehook.c, main/bridge_after.c: bridges/bridge_native_rtp:
	  Reconfigure bridge on removal of framehook This patch is a re-do
	  of r414122. When r414122 was merged, a major problem with it was
	  uncovered. UNBRIDGE soft hangup flags have a catastrophic effect
	  on the pbx core if they leak out from the bridge layer: the
	  channel gets hung up. With the number of threads involved in a
	  blind transfer, and with the initial patch, it was likely that
	  this would occur. This caused a large number of test failures
	  This patch is nearly identical with the one proposed in r414122,
	  save for the following changes: - We explicitly clear the
	  UNBRIDGE flag when setting an after goto on a channel in a bridge
	  - Defensively, if we encounter an UNBRIDGE flag in the pbx core,
	  we handle it https://reviewboard.asterisk.org/r/3585/ ........
	  Merged revisions 415443 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-07 00:42 +0000 [r415428]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/bridge.h, /: bridge.h: Remove redundant struct
	  ast_bridge_channel forward declaration. ........ Merged revisions
	  415427 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-06 21:44 +0000 [r415411]  Jonathan Rose <jrose@digium.com>

	* include/asterisk/manager.h, main/config.c, main/manager.c, /,
	  channels/chan_sip.c, include/asterisk/config.h: chan_sip: Fix
	  order of variables specified in SIPNotify action Prior to this
	  patch, sequential variables would be ordered in reverse from the
	  order specified in the manager action. Review:
	  https://reviewboard.asterisk.org/r/3588/ ........ Merged
	  revisions 415359 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 415390 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415410 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-06 20:45 +0000 [r415358]  Kevin Harwell <kharwell@digium.com>

	* main/uri.c, tests/test_websocket_client.c: core uri: Custom uri
	  parsing error when no query parameters If using the custom URI
	  parsing code (not external uriparser lib) and there was no query
	  parameters the resulting pointer would be NULL and then an
	  attempt was made to subtract from it. The pointer is now set to a
	  valid value if there is no query parameter(s). Also, in the
	  'ast_uri_make_host_with_port' function when setting the
	  terminator on the resulting string it was writing it one past the
	  end of allocated memory. It now writes the string terminator
	  appropriately.

2014-06-06 19:13 +0000 [r415343]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_pjsip_sdp_rtp.c: PJSIP: Remove premature write of raw
	  formats Currently, there are situations that can occur when using
	  chan_pjsip and certain dialplan applications (notably ChanSpy())
	  that can cause the channel to get no audio with scrolling
	  warnings about format mismatches. This is caused by a failure to
	  update translation paths on a mid-call native format update since
	  the raw formats have already been updated by res_pjsip_sdp_rtp.c
	  in set_caps(). Removing the premature raw format updates allows
	  the translation paths to be setup correctly and the raw read and
	  write formats with them. AFS-63 #close ........ Merged revisions
	  415342 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-06 14:12 +0000 [r415319]  George Joseph <george.joseph@fairview5.com>

	* tests/test_astobj2.c, main/astobj2_private.h (added),
	  main/astobj2.c, main/astobj2_container_private.h (added),
	  main/astobj2_container.c (added), main/astobj2_hash.c (added),
	  main/astobj2_rbtree.c (added), /, include/asterisk/astobj2.h:
	  Split astobj2.c into more maintainable components. Split
	  astobj2.c into the following files to improve maintainability.
	  astobj2.c - object primitives, object primitive misc and
	  initialization code. astobj2_private.h - internal object
	  declarations needed by the containers. astobj2_container.c -
	  generic conainer and container misc code.
	  astobj2_container_hash.c - hash container specific code.
	  astobj2_container_rbtree.c - rbtree container specific code.
	  astobj2_container_private.h - generic container definitions and
	  rtti prototypes. https://reviewboard.asterisk.org/r/3576/
	  ........ Merged revisions 415317 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-06 12:49 +0000 [r415302]  Rusty Newton <rnewton@digium.com>

	* /, configs/cli_aliases.conf.sample: configs/cli_aliases.conf: Two
	  new aliases, plus enhancements for context names. Changed naming
	  of included alias templates to avoid confusion between version
	  names. For example, asterisk12 was for asterisk 1.2, so I changed
	  it to asterisk_1dot2, so that later we can use asterisk_12 for
	  Asterisk 12. Added alias for "features reload" to the template
	  for Asterisk 11 style syntax template, as features reload was
	  removed in 12, but you can still do "module reload features"
	  Added alias for "pjsip reload" to the friendly template. It is
	  shorter than "module reload res_pjsip.so" and if some are like
	  me; I constantly forget that reloading chan_pjsip doesn't parse
	  config. Remembering "pjsip reload" is just easier. ASTERISK-23654
	  #close ASTERISK-23654 #comment Fixed by adding two new aliases
	  and enhancements for context names. Review:
	  https://reviewboard.asterisk.org/r/3572/ ........ Merged
	  revisions 415301 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-05 19:04 +0000 [r415231-415288]  Richard Mudgett <rmudgett@digium.com>

	* main/config.c: config: Fix indentation and missing curlies in
	  config_text_file_load().

	* main/config.c, /: config: Fix config files not reloading when
	  only an included file changes. The twisted logic determining if a
	  config file should be reloaded was mostly broken and disabled.
	  The incorrect test that ASTERISK-23383 fixed actually reenabled
	  the broken logic. The incorrect test was causing the timestamp to
	  always be cleared which caused config files with includes to
	  always be reloaded. * Made wildcard includes always cause a
	  reload. Determining if a file was deleted cannot be determined
	  without restructuring the cache to determine if any files are
	  missing from the last files actually loaded. Also without
	  refactoring config_text_file_load(), the glob loop couldn't check
	  more than one file for changes anyway. * Made remove the cache
	  entry if the file no longer exists when trying to get its
	  timestamp or it is no longer a regular file. This fixes the
	  corner case where the file was loaded, then deleted, then the
	  config reloaded, then the file restored with the same timestamp,
	  and then the config reloaded again. * Made remove the cache entry
	  include list when actually loading the file. This gets rid of any
	  stale includes the file had from the last time the file was
	  loaded. ASTERISK-23683 #close Reported by: tootai Review:
	  https://reviewboard.asterisk.org/r/3575/ ........ Merged
	  revisions 415225 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 415229 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415230 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-05 17:22 +0000 [r415223]  Kevin Harwell <kharwell@digium.com>

	* tests/test_uri.c (added), include/asterisk/http_websocket.h,
	  main/http.c, main/uri.c (added), tests/test_websocket_client.c
	  (added), res/res_http_websocket.c, include/asterisk/http.h,
	  include/asterisk/uri.h (added),
	  res/res_http_websocket.exports.in: res_http_websocket: Create a
	  websocket client Added a websocket server client in Asterisk.
	  Asterisk has a websocket server, but not a client. The ability to
	  have Asterisk be able to connect to a websocket server can
	  potentially be useful for future work (for instance this could
	  allow ARI to connect back to some external system, although more
	  work would be needed in order to incorporate that). Also a couple
	  of things to note - proxy connection support has not been
	  implemented and there is limited http response code handling
	  (basically, it is connect or not). Also added an initial new URI
	  handling mechanism to core. Internet type URI's are parsed into a
	  data structure that contains pointers to the various parts of the
	  URI. (closes issue ASTERISK-23742) Reported by: Kevin Harwell
	  Review: https://reviewboard.asterisk.org/r/3541/

2014-06-05 14:49 +0000 [r415208]  Matthew Jordan <mjordan@digium.com>

	* /, apps/app_confbridge.c: app_confbridge: Allow muting of users
	  waiting to enter a ConfBridge Prior to this patch, users waiting
	  to enter a ConfBridge were not considered when muted via the CLI
	  or via AMI. Instead, a confusing message would be emitted stating
	  that the channel did not exist. This patch allows a user to be
	  muted when waiting to enter a ConfBridge conference. This is
	  equivalent to start when muted, only toggled via the CLI or AMI.
	  Review: https://reviewboard.asterisk.org/r/3582 #ASTERISK-23824
	  #close patches: rb3582.patch uploaded by tm1000 (License 6524)
	  ........ Merged revisions 415206 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415207 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-05 11:59 +0000 [r415192]  Kinsey Moore <kmoore@digium.com>

	* /, channels/chan_pjsip.c: PJSIP: Send initial connected line
	  information This makes chan_pjsip send connected line information
	  when it is called so that connected line information is available
	  on the connected channel. (closes issue DPMA-442) Reported by:
	  John Bigelow Review: https://reviewboard.asterisk.org/r/3584/
	  ........ Merged revisions 415191 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-04 20:16 +0000 [r415173]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, contrib/scripts/safe_asterisk: safe_asterisk: Cleanup and
	  debian compatibility. Cleans up the safe_asterisk script and adds
	  the ASTSAFE_FOREGROUND option that allows the debian asterisk
	  init script to capture the right pid. * Drop the vim #modeline
	  which wasn't used. Use test consistently without the odd
	  configure xno syntax. Double quote all paths. General cleanup. *
	  Don't output message()s to the console but only to TTY if set. *
	  Allow TTY to be "no" as well as empty (debian compatibility with
	  debian/patches/safe_asterisk-config). * Add option to export
	  ASTSAFE_FOREGROUND=1 from the init script that calls this to
	  disable backgrounding. Debian uses a similar method in
	  debian/patches/safe_asterisk-nobg). ASTERISK-23492 #close Review:
	  https://reviewboard.asterisk.org/r/3574/ ........ Merged
	  revisions 415132 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 415171 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415172 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-04 14:13 +0000 [r415116-415118]  Matthew Jordan <mjordan@digium.com>

	* /, channels/chan_pjsip.c: chan_pjsip: Add debug in RTP Engine
	  glue callback This patch adds some debug statements that aid with
	  determining why a direct media request may or may not be
	  initiated. ........ Merged revisions 415117 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_session.c, /: res_pjsip_session: Add debug
	  statement for session refreshes This small patch adds a debug
	  level 3 statement indicating how a session refresh is being sent
	  - either as a re-INVITE or as an UPDATE - and where the session
	  refresh is going. ........ Merged revisions 415115 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-04 07:27 +0000 [r415080]  Corey Farrell <git@cfware.com>

	* /, apps/confbridge/include/confbridge.h, apps/app_confbridge.c:
	  app_confbridge: Correct verification of conference name length
	  Conference names were not checked for maximum length, allowing
	  unexpected behaviour. This change adds checking to ensure the
	  maximum length is not exceeded. The maximum length is also
	  changed from 32 to AST_MAX_EXTENSION. ASTERISK-23035 #close
	  Reported by: Iñaki Cívico Tested by: Iñaki Cívico Patches:
	  confbridge-enforce_max-1.8.patch uploaded by coreyfarrell
	  (license 5909) confbridge-enforce_max-11up.patch uploaded by
	  coreyfarrell (license 5909) ........ Merged revisions 415060 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 415066 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 415078 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-03 07:36 +0000 [r415000]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, funcs/func_odbc.c: func_odbc: Fix fixed size buffers fix
	  (r414968). The change that removed the fixed size buffers in
	  odbc-related code -- removing arbitrary column width limits --
	  was incomplete. This change adds: no segfault on writesql without
	  insertsql and return value checks after strdup. While I was in
	  the vicinity I cleaned up the linefeeds in the odbc function
	  descriptions, moved some code for clarity, removed some blobs and
	  noted (but didn't fix) that the 'odbc write ... exec' CLI command
	  doesn't behave as the dialplan equivalent when insertsql= is
	  used. ASTERISK-23582 #close Review:
	  https://reviewboard.asterisk.org/r/3579/ ........ Merged
	  revisions 414997 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414998 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414999 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-06-01 15:32 +0000 [r414976]  Joshua Colp <jcolp@digium.com>

	* /, bridges/bridge_native_rtp.c: bridge_native_rtp: Take the
	  bridge type choice of both channels into account. The
	  bridge_native_rtp module currently uses the bridge result of the
	  first channel that joins a bridge as the ultimate result. This
	  means that if the first channel has direct media enabled but the
	  second does not a direct media bridge will still occur. This
	  change makes it so that both sides are taken into account. If
	  either side forbids the bridge or responds with a local bridge
	  result then either a generic or local bridge occurs.
	  ASTERISK-23541 #close Reported by: Justin E Review:
	  https://reviewboard.asterisk.org/r/3577/ ........ Merged
	  revisions 414975 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-30 14:53 +0000 [r414949]  Kinsey Moore <kmoore@digium.com>

	* res/res_pjsip_refer.c, /: PJSIP: Prevent crash on blind transfer
	  Blind transfers don't go too well with NULL channels which can
	  occur if the channel has already been transferred away. (closes
	  issue ASTERISK-23718) Reported by: Jonathan Rose ........ Merged
	  revisions 414948 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-30 12:42 +0000 [r414883-414935]  Matthew Jordan <mjordan@digium.com>

	* main/audiohook.c, CHANGES, res/ari/ari_model_validators.c,
	  res/ari/ari_model_validators.h, funcs/func_talkdetect.c (added),
	  include/asterisk/stasis_channels.h,
	  rest-api/api-docs/events.json, /, main/stasis_channels.c:
	  TALK_DETECT: A channel function that raises events when talking
	  is detected This patch adds a new channel function TALK_DETECT
	  that, when set on a channel, causes events indicating the
	  start/stop of talking on a channel to be emitted to both AMI and
	  ARI clients. The function allows setting both the silence
	  threshold (the length of silence after which we decide no one is
	  talking) as well as the talking threshold (the amount of energy
	  that counts as talking). Parameters can be updated on a channel
	  after talk detection has been enabled, and talk detection can be
	  removed at any time. The events raised by the function use a
	  nomenclature similar to existing AMI/ARI events. For AMI:
	  ChannelTalkingStart/ChannelTalkingStop For ARI:
	  ChannelTalkingStarted/ChannelTalkingFinished Review:
	  https://reviewboard.asterisk.org/r/3563/ #ASTERISK-23786 #close
	  Reported by: Matt Jordan ........ Merged revisions 414934 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/config.c, /: main/config.c: AMI action UpdateConfig EmptyCat
	  clears all categories When invoking UpdateConfig AMI action with
	  Action set to EmptyCat, Asterisk will make all categories empty
	  in the config but the one requested with a Cat variable. This is
	  due to a bug in ast_category_empty (main/config.c) that makes an
	  incorrect comparison for a category name. This patch corrects the
	  comparison such that only the requested category is cleared.
	  Review: https://reviewboard.asterisk.org/r/3573/ #ASTERISK-23803
	  #close Reported by: zvision patches: manager.c.diff uploaded by
	  zvision (License 5755) ........ Merged revisions 414880 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414881 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414882 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-29 18:51 +0000 [r414861]  Kinsey Moore <kmoore@digium.com>

	* main/pbx.c, /: PBX: Prevent incorrect hint parsing Dynamic and
	  pattern matching hints should not be checked for their last known
	  state until they are instantiated by subscribers. (closes issue
	  AFS-56) Reported by: John Hardin Patch AFS-56-pbx.diff submitted
	  by Matt Jordan (license 6283) ........ Merged revisions 414813
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 414859 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414860 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-28 22:54 +0000 [r414798]  Matthew Jordan <mjordan@digium.com>

	* main/loader.c, include/asterisk/logger.h, res/res_config_curl.c,
	  cel/cel_odbc.c, res/res_config_odbc.c,
	  bridges/bridge_builtin_features.c, main/optional_api.c,
	  main/logger.c, main/config_options.c, cdr/cdr_odbc.c,
	  apps/app_mixmonitor.c, main/asterisk.c, res/res_odbc.c,
	  main/xmldoc.c, apps/app_voicemail.c, cel/cel_pgsql.c,
	  channels/chan_unistim.c, res/res_config_pgsql.c, main/pbx.c,
	  cdr/cdr_sqlite3_custom.c, res/res_fax.c, main/bridge.c,
	  apps/app_waitforsilence.c, cdr/cdr_adaptive_odbc.c,
	  res/parking/parking_applications.c, cdr/cdr_pgsql.c,
	  res/res_jabber.c: Logger/CLI/etc.: Fix some aesthetic issues;
	  reduce chatty verbose messages This patch addresses some
	  aesthetic issues in Asterisk. These are all just minor tweaks to
	  improve the look of the CLI when used in a variety of settings.
	  Specifically: * A number of chatty verbose messages were removed
	  or demoted to DEBUG messages. Verbose messages with a verbosity
	  level of 5 or higher were - if kept as verbose messages - demoted
	  to level 4. Several messages that were emitted at verbose level 3
	  were demoted to 4, as announcement of dialplan applications being
	  executed occur at level 3 (and so the effects of those
	  applications should generally be less). * Some verbose messages
	  that only appear when their respective 'debug' options are
	  enabled were bumped up to always be displayed. *
	  Prefix/timestamping of verbose messages were moved to the
	  verboser handlers. This was done to prevent duplication of
	  prefixes when the timestamp option (-T) is used with the CLI. *
	  Verbose magic is removed from messages before being emitted to
	  non-verboser handlers. This prevents the magic in multi-line
	  verbose messages (such as SIP debug traces or the output of
	  DumpChan) from being written to files. * _Slightly_ better
	  support for the "light background" option (-W) was added. This
	  includes using ast_term_quit in the output of XML documentation
	  help, as well as changing the "Asterisk Ready" prompt to bright
	  green on the default background (which stands a better chance of
	  being displayed properly than bright white). Review:
	  https://reviewboard.asterisk.org/r/3547/

2014-05-28 20:53 +0000 [r414781]  Rusty Newton <rnewton@digium.com>

	* /, configs/pjsip.conf.sample: pjsip.conf: privkey_file should be
	  priv_key_file, mediaencryption=yes should be mediaencryption=sdes
	  privkey_file was missed in the snake case update. An example
	  included an invalid value for the mediaencryption option.
	  ........ Merged revisions 414780 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-28 17:46 +0000 [r414764-414766]  Matthew Jordan <mjordan@digium.com>

	* rest-api/api-docs/deviceStates.json,
	  rest-api/api-docs/endpoints.json,
	  rest-api/api-docs/mailboxes.json, rest-api/api-docs/events.json,
	  /, rest-api/api-docs/asterisk.json,
	  rest-api/api-docs/applications.json,
	  rest-api/api-docs/playbacks.json,
	  rest-api/api-docs/channels.json, rest-api/api-docs/sounds.json,
	  rest-api/resources.json, include/asterisk/manager.h,
	  rest-api/api-docs/bridges.json,
	  rest-api/api-docs/recordings.json: AMI/ARI: Update version
	  numbers Update the semantic versioning of ARI to 1.3.0 and AMI to
	  2.3.0 to account for backwards compatible changes going from
	  12.2.0 to 12.3.0. ........ Merged revisions 414765 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* contrib/ast-db-manage/cdr/env.py, /: ast-db-manage/cdr/env.py:
	  Don't fail if a config file can't be loaded When generating SQL
	  files via the repotools alembic_creator.py script, a
	  configuration object is used programatically with SQLAlechemy, as
	  opposed to a configuration file. This patch ignores failures to
	  interpret a config file, as ... there isn't one in this case.
	  ........ Merged revisions 414763 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-28 16:56 +0000 [r414748-414750]  Richard Mudgett <rmudgett@digium.com>

	* res/res_pjsip_session.c, include/asterisk/res_pjsip_session.h, /,
	  res/res_pjsip_t38.c: res_pjsip_session: Fix leaked video RTP
	  ports. Simply enabling PJSIP to negotiage a video codec (e.g.,
	  h264) would leak video RTP ports if the codec were not negotiated
	  by an incoming call. * Made add_sdp_streams() associate the
	  handler with the media stream if the handler handled the media
	  stream. Otherwise, when the ast_sip_session_media object was
	  destroyed it didn't know how to clean up the RTP resources. *
	  Fixed sdp_requires_deferral() associating the handler with the
	  media stream when deciding if the SDP processing needs to be
	  deferred for T.38. Like the leaked video RTP ports, the T.38
	  handler needs to clean up allocated resources from deciding if
	  SDP processing needs to be deffered. * Cleaned up some dead code
	  in handle_incoming_sdp() and sdp_requires_deferral().
	  ASTERISK-23721 #close Reported by: cervajs Review:
	  https://reviewboard.asterisk.org/r/3571/ ........ Merged
	  revisions 414749 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, CHANGES, apps/app_agent_pool.c: app_agent_pool: Return to
	  dialplan if the agent fails to ack the call. Improvements to the
	  agent pool functionality. * AgentRequest no longer hangs up the
	  caller if the agent fails to connect with the caller. It now
	  continues in the dialplan. * AgentRequest returns AGENT_STATUS
	  set to NOT_CONNECTED if the agent failed to connect with the
	  call. Most likely because the agent did not acknowledge the call
	  in time or got disconnected. * The agent alerting play file
	  configured by the agent.conf custom_beep option can now be
	  disabled by setting the option to an empty string. The agent is
	  effectively alerted to a call presence when MOH stops. * Fixed
	  bridge reference leak when the agent connects with a caller.
	  ASTERISK-23499 #close Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3551/ ........ Merged
	  revisions 414747 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-28 11:37 +0000 [r414696]  Joshua Colp <jcolp@digium.com>

	* res/res_config_odbc.c, /, funcs/func_odbc.c: res_config_odbc: Use
	  dynamically sized buffers to store row data so values do not get
	  truncated. ASTERISK-23582 #close ASTERISk-23582 #comment Reported
	  by: Walter Doekes Review:
	  https://reviewboard.asterisk.org/r/3557/ ........ Merged
	  revisions 414693 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414694 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414695 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-28 09:43 +0000 [r414567-414679]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, channels/chan_unistim.c: chan_unistim: Unlock mutex in rare
	  OOM condition. #ASTERISK-23792 #close Reported by: Peter Whisker
	  Review: https://reviewboard.asterisk.org/r/3567/ ........ Merged
	  revisions 414677 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414678 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c: chan_sip: Start session timer at 200, not
	  at INVITE. Asterisk started counting the session timer at INVITE
	  while the other end correctly started at 200. This meant that for
	  short session-expiries (90 seconds) combined with long ringing
	  times (e.g. 30 seconds), asterisk would wrongly assume that the
	  timer was hit before the other end thought it was time to send a
	  session refresh. This resulted in prematurely ended calls. This
	  changes the session timer to start counting first at 200 like RFC
	  says it should. (Also removed a few excess NULL checks that would
	  never hit, because if they did, asterisk would have crashed
	  already.) ASTERISK-22551 #close Reported by: i2045 Review:
	  https://reviewboard.asterisk.org/r/3562/ ........ Merged
	  revisions 414620 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414628 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414636 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_config_odbc.c, /: res_config_odbc: Fix old and new
	  ast_string_field memory leaks. The ODBC realtime driver uses ^NN
	  parameter encoding to cope with the special meaning of the
	  semi-colon. A semi-colon in a field is interpreted as if the key
	  was supplied twice, something which isn't otherwise possible with
	  fixed database columns. E.g. allow=alaw;ulaw is parsed as
	  allow=alaw and allow=ulaw. A literal semi-colon is rewritten to
	  ^3B when stored in the database. The module uses a stringfield to
	  efficiently store the encoded parameters. However, this
	  stringfield wasn't always freed in some off-nominal cases. Commit
	  r413241 fixed initialization so the encoding for INSERT and
	  DELETE queries wouldn't crash. (Only SELECTs and UPDATEs worked
	  apparently.) But that commit forgot the frees. This change cleans
	  that up. Review: https://reviewboard.asterisk.org/r/3555/
	  ........ Merged revisions 414564 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414565 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414566 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-25 02:37 +0000 [r414543]  Matthew Jordan <mjordan@digium.com>

	* /, main/core_unreal.c: core_unreal: Prevent double free of
	  core_unreal pvt When a channel is destroyed (such as via
	  ast_channel_release in off nominal paths in core_unreal), it will
	  attempt to free (via ast_free) the channel tech pvt. This is
	  problematic for a few reasons: 1. The channel tech pvt is an ao2
	  object in core_unreal. Free'ing the pvt directly is no good. 2.
	  The channel tech pvt's reference count is dropped just prior to
	  calling ast_channel_release, resulting in the pvt's destruction.
	  Hence, the channel destructor is free'ing an invalid pointer.
	  This patch keeps the dropping of the reference count, but sets
	  the pvt to NULL on the channel prior to releasing it. This models
	  what would occur if the channel was hung up directly. ........
	  Merged revisions 414542 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-23 17:36 +0000 [r414529]  Matthew Jordan <mjordan@digium.com>

	* tests/test_cel.c, /: test_cel: Fix unit tests broken due to event
	  def changes from res_corosync This patch instructs test_cel to
	  skip any IE types it doesn't care about. The addition of the raw
	  and bitfield types caused the tests to fail. ........ Merged
	  revisions 414528 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-23 14:36 +0000 [r414475]  Kinsey Moore <kmoore@digium.com>

	* main/event.c, /: Fix signed/unsigned build warnings ........
	  Merged revisions 414474 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-22 16:19 +0000 [r414417]  Richard Mudgett <rmudgett@digium.com>

	* /, apps/app_meetme.c: app_meetme: Don't interrupt MOH for
	  waitmarked users. Occasionally, when the last marked user leaves
	  the conference, waitmarked users don't get MOH if MOH is supposed
	  to be played while a waitmarked user is waiting for another
	  marked user. * Made not interrupt MOH when the user is a
	  waitmarked user. The waitmarked user doesn't need to hear any
	  leave announcements from the conference as the user would have
	  already heard different leave announcements if they were enabled.
	  Apparently DAHDI occasionally sends unending non-silent streams
	  to these users or a normal user still in the conference has
	  continuous high background noise. These non-silent streams cause
	  MOH to be suspended while the never ending "announcement" is
	  played. Issue caused by ASTERISK-13680. AST-1349 #close Reported
	  by: Tyler Stewart Review:
	  https://reviewboard.asterisk.org/r/3543/ ........ Merged
	  revisions 414401 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414402 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414404 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-22 16:09 +0000 [r414406]  Scott Griepentrog <sgriepentrog@digium.com>

	* rest-api/api-docs/events.json, /, res/stasis/app.c,
	  res/ari/resource_events.c, include/asterisk/stasis_app.h,
	  include/asterisk/stasis.h, apps/app_userevent.c,
	  res/ari/resource_events.h, res/ari/ari_model_validators.c,
	  CHANGES, main/stasis.c, res/ari/ari_model_validators.h,
	  include/asterisk/stasis_channels.h, res/res_ari_events.c,
	  main/stasis_channels.c, res/res_stasis.c,
	  main/manager_channels.c, main/stasis_endpoints.c: ARI: Add
	  ability to raise arbitrary User Events User events can now be
	  generated from ARI. Events can be signalled with arbitrary json
	  variables, and include one or more of channel, bridge, or
	  endpoint snapshots. An application must be specified which will
	  receive the event message (other applications can subscribe to
	  it). The message will also be delivered via AMI provided a
	  channel is attached. Dialplan generated user event messages are
	  still transmitted via the channel, and will only be received by a
	  stasis application they are attached to or if the channel is
	  subscribed to. This change also introduces the multi object blob
	  mechanism used to send multiple snapshot types in a single
	  message. The dialplan app UserEvent was also changed to use multi
	  object blob, and a new stasis message type created to handle
	  them. ASTERISK-22697 #close Review:
	  https://reviewboard.asterisk.org/r/3494/ ........ Merged
	  revisions 414405 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-22 15:52 +0000 [r414403]  Jonathan Rose <jrose@digium.com>

	* include/asterisk/bridge.h, res/parking/parking_bridge_features.c,
	  channels/chan_mgcp.c, res/res_pjsip_refer.c,
	  channels/chan_dahdi.c, channels/sig_analog.c, /,
	  channels/chan_sip.c, main/parking.c, main/bridge.c,
	  main/bridge_basic.c, res/parking/parking_applications.c,
	  include/asterisk/parking.h: res_pjsip_refer: Fix bugs involving
	  Parking/PJSIP/transfers PJSIP would never send the final 200
	  Notify for a blind transfer when transferring to parking. This
	  patch fixes that. In addition, it fixes a reference leak when
	  performing blind transfers to non-bridging extensions. Review:
	  https://reviewboard.asterisk.org/r/3485/ ........ Merged
	  revisions 414400 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-22 14:02 +0000 [r414331-414348]  Matthew Jordan <mjordan@digium.com>

	* /, UPGRADE.txt: UPGRADE: Add note for REF_DEBUG flag ........
	  Merged revisions 414345 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414346 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414347 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_corosync.c, include/asterisk/stasis.h, main/app.c,
	  main/devicestate.c, main/event.c, main/stasis.c,
	  include/asterisk/devicestate.h, include/asterisk/event.h,
	  main/stasis_message.c, /, include/asterisk/event_defs.h:
	  res_corosync: Update module to work with Stasis (and compile)
	  This patch fixes res_corosync such that it works with Asterisk
	  12. This restores the functionality that was present in previous
	  versions of Asterisk, and ensures compatibility with those
	  versions by restoring the binary message format needed to pass
	  information from/to them. The following changes were made in the
	  core to support this: * The event system has been partially
	  restored. All event definition and event types in this patch were
	  pulled from Asterisk 11. Previously, we had hoped that this
	  information would live in res_corosync; however, the approach in
	  this patch seems to be better for a few reasons: (1)
	  Theoretically, ast_events can be used by any module as a binary
	  representation of a Stasis message. Given the structure of an
	  ast_event object, that information has to live in the core to be
	  used universally. For example, defining the payload of a device
	  state ast_event in res_corosync could result in an incompatible
	  device state representation in another module. (2) Much of this
	  representation already lived in the core, and was not easily
	  extensible. (3) The code already existed. :-) * Stasis message
	  types now have a message formatter that converts their payload to
	  an ast_event object. * Stasis message forwarders now handle
	  forwarding to themselves. Previously this would result in an
	  infinite recursive call. Now, this simply creates a new
	  forwarding object with no forwards set up (as it is the thing it
	  is forwarding to). This is advantageous for res_corosync, as
	  returning NULL would also imply an unrecoverable error. Returning
	  a subscription in this case allows for easier handling of message
	  types that are published directly to an aggregate topic that has
	  forwarders. Review: https://reviewboard.asterisk.org/r/3486/
	  ASTERISK-22912 #close ASTERISK-22372 #close ........ Merged
	  revisions 414330 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-21 22:24 +0000 [r414297]  Richard Mudgett <rmudgett@digium.com>

	* /, main/core_unreal.c: core_unreal: Only block media frames when
	  a generator is on both ends of an unreal channel. The fix for
	  ASTERISK-12292 was a bit too aggressive. You could have
	  generators pointed at each other on local channels but need to
	  get other kinds of frames such as DTMF or CONNECTED_LINE frames
	  accross. ........ Merged revisions 414269 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414270 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414272 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-21 19:08 +0000 [r414217]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, funcs/func_strings.c: pbx.c: prevent potential crash from
	  recursive replace() Recurisve usage of replace() resulted in
	  corruption of the temporary string storage and potential crash.
	  By changing the string to be allocated separtely per instance,
	  this is eliminated. ASTERISK-23650 #comment Reported by: Roel van
	  Meer ASTERISK-23650 #close Review:
	  https://reviewboard.asterisk.org/r/3539/ ........ Merged
	  revisions 414214 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414215 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414216 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-19 19:52 +0000 [r414196]  Paul Belanger <paul.belanger@polybeacon.com>

	* res/res_stasis_answer.c, /: Replace __ast_answer with
	  ast_raw_answer in app_control_answer While load testing an ARI
	  application, I noticed asterisk was returning HTTP 500 internal
	  server errors on channels/:id/answer. After talking to
	  #asterisk-dev, the issue appeared to be a lack of media flowing
	  after __ast_answer() was called. So now, we call ast_raw_answer
	  instead and no longer wait for media. ASTERISK-23758 #close
	  Review: https://reviewboard.asterisk.org/r/3549/ ........ Merged
	  revisions 414195 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-19 01:10 +0000 [r414123-414138]  Matthew Jordan <mjordan@digium.com>

	* include/asterisk/channel.h, bridges/bridge_native_rtp.c,
	  main/bridge_channel.c, res/res_pjsip_refer.c,
	  res/res_pjsip_session.c, main/channel.c, /, main/framehook.c:
	  Undo r414123 The Test Suite caught a few problems, undoing until
	  those are resolved

	* include/asterisk/channel.h, bridges/bridge_native_rtp.c,
	  main/bridge_channel.c, res/res_pjsip_session.c, main/channel.c,
	  /, main/framehook.c: bridge_native_rtp/bridge_channel: Fix direct
	  media issues due to frame hook This patch fixes issues with
	  direct media bridges that occur after a blind transfer. These
	  issues were caught by the (currently failing)
	  pjsip/transfers/blind_transfer/caller_direct_media test. The test
	  currently fails primarily for two reasons: (1) When Bob and
	  Charlie (the transfer target and the transfer destination) enter
	  a bridge together, the framehook remains on the transfer target
	  channel until both channels are in the bridge. As it consumes
	  voice frames, the initial bridge type is a simple bridge. The
	  framehook is removed when both channels are in the bridge;
	  however, this does not currently cause the bridging framework to
	  re-evaluate the bridge. This patch adds a AST_SOFTHANGUP_UNBRIDGE
	  poke to the transfer target channel when a framehook is removed
	  so the bridge can re-evaluate itself. (2) When a channel leaves a
	  native RTP bridge, it may be leaving due to being hung up.
	  Sending a re-INVITE to a channel that is about to be hung up is
	  not nice - in fact, there's a good chance we'll send the BYE
	  request before the channel has had a chance to send back a 200
	  OK. To be somewhat nicer, this patch adds a function to channel.h
	  that allows the bridging framework to query for exactly why a
	  channel is leaving a bridge via the channel's soft hangup flags.
	  This allows it to only send the re-INVITE if there's a chance the
	  channel will survive the native bridging experience. Review:
	  https://reviewboard.asterisk.org/r/3535/ ........ Merged
	  revisions 414122 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-16 20:06 +0000 [r413994-414070]  Richard Mudgett <rmudgett@digium.com>

	* /, channels/chan_dahdi.c: chan_dahdi: Fix analog dialtone
	  detection. * Check if waitingfordt (waitfordialtone) is enabled
	  in dahdi_read() to allow the DSP to operate early enough to
	  detect dialtone. * Made use the correct variable in
	  my_check_waitingfordt(). ASTERISK-23709 #close Reported by: Steve
	  Davies Patches: dialtone_detect_fix (license #5012) patch
	  uploaded by Steve Davies Review:
	  https://reviewboard.asterisk.org/r/3534/ ........ Merged
	  revisions 414067 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 414068 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414069 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/sig_pri.c, /: sig_pri.c: Pull the pri_dchannel()
	  PRI_EVENT_RING case into its own function. * Populate the
	  CALLERID(ani2) value (and the special CALLINGANI2 channel
	  variable) with the ANI2 value in addition to the PRI specific
	  ANI2 channel variable. * Made complete snapshot staging with the
	  channel lock held. All channel snapshots need to be done while
	  the channel lock is held. ........ Merged revisions 414050 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 414051 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, apps/app_meetme.c: app_meetme: Fix overwrite of DAHDI
	  conference data structure. Starting a conference recording using
	  the admin menu overwrites the DAHDI conference data structure
	  used to modify the admin user's conference mute mode. * Made no
	  longer pass the user's DAHDI conference data structure into the
	  menu functions. The menu now uses its own DAHDI conference data
	  structure to start the recording channel. * Moved the unlock
	  conf->playlock to before playing the conf-full message. No sense
	  keeping the lock while that prompt is playing. The user is never
	  going to get into the conference at that point. ........ Merged
	  revisions 413991 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413992 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413993 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-14 15:41 +0000 [r413897]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, res/res_musiconhold.c: res_musiconhold: Minor cleanup. Fix a
	  few free()'s that should be ast_free()'s. Reverted an old
	  workaround that isn't necessary. Reorder a tiny bit of code.
	  Remove a bit of commented-out code. Review:
	  https://reviewboard.asterisk.org/r/3536/ ........ Merged
	  revisions 413894 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413895 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413896 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-13 18:09 +0000 [r413878]  Jonathan Rose <jrose@digium.com>

	* main/netsock2.c, /, channels/chan_sip.c,
	  include/asterisk/netsock2.h: chan_sip: Add TLS and SRTP status to
	  CLI command 'sip show channel' ASTERISK-23564 #close Reported by:
	  Patrick Laimbock Review: https://reviewboard.asterisk.org/r/3474/
	  ........ Merged revisions 413876 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413877 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-13 13:53 +0000 [r413790-413793]  Walter Doekes <walter+asterisk@wjd.nu>

	* res/res_format_attr_h264.c, /: h264: Fix H264 SDP payload format.
	  https://tools.ietf.org/html/rfc3984#section-8.1 says
	  profile-level-id takes 3 bytes in base16 (6 hex digits). This
	  fixes video setup in certain cases. ASTERISK-23664 #close
	  ASTERISK-23664 #comment Patch r3530.patch uploaded by Guillaume
	  Maudoux. Review: https://reviewboard.asterisk.org/r/3530/
	  ........ Merged revisions 413791 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413792 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/rtp_engine.c: rtp: Fix case typo in H263+ mime.
	  http://tools.ietf.org/html/rfc3555#section-4.2.6 says the
	  canonical mime subtype is "H263-1998", not "h263-1998". Original
	  code was added in r183101 on 2009-03-19 02:26:50 +0100. This
	  fixes issues with Polycom phones. ASTERISK-23665 #close
	  ASTERISK-23665 #comment Patch r3529.patch uploaded by Guillaume
	  Maudoux, backported by me. Review:
	  https://reviewboard.asterisk.org/r/3529/ ........ Merged
	  revisions 413787 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413788 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413789 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-13 00:35 +0000 [r413770-413772]  Richard Mudgett <rmudgett@digium.com>

	* configure.ac, channels/sig_pri.c, /, configure,
	  include/asterisk/autoconfig.h.in: chan_dahdi/sig_pri: Prevent
	  unnecessary PROGRESS events when overlap dialing is enabled. When
	  overlap dialing is enabled, the lack of inband audio available
	  information in the SETUP_ACKNOWLEDGE events causes an
	  interoperability problem with SIP. sig_pri doesn't know if there
	  is dialtone present when a SETUP_ACKNOWLEDGE is received so it
	  assumes it is there and posts an AST_CONTROL_PROGRESS frame. The
	  SIP channel driver then sends out a 183 Session Progress and
	  blocks the desired 180 Ringing message when the ALERTING message
	  comes in. * Made the configure script detect if the installed
	  version of libpri supports the SETUP_ACKNOWLEDGE enhancements. *
	  Using the new API, made generate an AST_CONTROL_PROGRESS frame on
	  an incoming SETUP_ACKNOWLEDGE message when the message indicates
	  inband audio is present instead of assuming that dialtone is
	  present. * Using the new API, made SETUP_ACKNOWLEDGE send out an
	  inband audio available indication only if dialtone is expected.
	  The change also makes the fallback behaviour of sending the
	  PROGRESS message better by sending it only if dialtone is
	  expected. * Changed receiving a PROCEEDING message to not
	  generate an AST_CONTROL_PROGRESS frame if the progress indication
	  ie indicates non-end-to-end-ISDN. This helps interoperability
	  with SIP. * Changed sending a PROCEEDING message in response to
	  an AST_CONTROL_PROCEEDING frame to not indicate inband audio
	  available. It was silly to do so anyway because the channel
	  driver doesn't know if inband audio is even available. This helps
	  interoperability with SIP. This patch and a corresponding change
	  in libpri work together to allow Asterisk to control the inband
	  audio available progress indication ie on the SETUP_ACKNOWLEDGE
	  message when dialtone is present. AST-1338 #close Reported by:
	  Tyler Stewart Review: https://reviewboard.asterisk.org/r/3521/
	  ........ Merged revisions 413714 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413765 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413771 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/sig_pri.c: Fix compiler warning from GCC 4.10 fixup.
	  ........ Merged revisions 413766 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-12 22:33 +0000 [r413713]  Jonathan Rose <jrose@digium.com>

	* apps/app_chanspy.c, /: app_chanspy: Fix a test that was failing
	  on account of r413551 ASTERISK-23381 #close ASTERISK-23381
	  #comment Reported by: Robert Moss Review:
	  https://reviewboard.asterisk.org/r/3505/ ........ Merged
	  revisions 413710 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413712 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-11 02:09 +0000 [r413651-413682]  Joshua Colp <jcolp@digium.com>

	* main/bridge_basic.c, include/asterisk/channel.h,
	  bridges/bridge_native_rtp.c, include/asterisk/framehook.h,
	  main/channel.c, /, main/framehook.c: framehooks: Add callback for
	  determining if a hook is consuming frames of a specific type. In
	  the past framehooks have had no capability to determine what
	  frame types a hook is actually interested in consuming. This has
	  meant that code has had to assume they want all frames, thus
	  preventing native bridging. This change adds a callback which
	  allows a framehook to be queried for whether it is consuming a
	  frame of a specific type. The native RTP bridging module has also
	  been updated to take advantange of this, allowing native bridging
	  to occur when previously it would not. ASTERISK-23497 #comment
	  Reported by: Etienne Lessard ASTERISK-23497 #close Review:
	  https://reviewboard.asterisk.org/r/3522/ ........ Merged
	  revisions 413681 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/channel.h, bridges/bridge_native_rtp.c,
	  include/asterisk/framehook.h, main/channel.c, /,
	  main/framehook.c, main/bridge_basic.c: Undoing framehook support.
	  Issues were uncovered by Bamboo.

	* /, main/framehook.c, main/bridge_basic.c,
	  include/asterisk/channel.h, bridges/bridge_native_rtp.c,
	  include/asterisk/framehook.h, main/channel.c: framehooks: Add
	  callback for determining if a hook is consuming frames of a
	  specific type. In the past framehooks have had no capability to
	  determine what frame types a hook is actually interested in
	  consuming. This has meant that code has had to assume they want
	  all frames, thus preventing native bridging. This change adds a
	  callback which allows a framehook to be queried for whether it is
	  consuming a frame of a specific type. The native RTP bridging
	  module has also been updated to take advantange of this, allowing
	  native bridging to occur when previously it would not.
	  ASTERISK-23497 #comment Reported by: Etienne Lessard
	  ASTERISK-23497 #close Review:
	  https://reviewboard.asterisk.org/r/3522/ ........ Merged
	  revisions 413650 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-09 23:18 +0000 [r413589-413599]  Kinsey Moore <kmoore@digium.com>

	* /, funcs/func_env.c: Fix 32bit build for func_env ........ Merged
	  revisions 413592 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413595 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413597 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/app_festival.c, pbx/dundi-parser.c, apps/app_getcpeid.c,
	  main/netsock.c, funcs/func_channel.c, main/audiohook.c,
	  pbx/pbx_config.c, res/res_pjsip_registrar.c, main/xmldoc.c,
	  channels/iax2/firmware.c, apps/app_voicemail.c, main/format.c,
	  cel/cel_pgsql.c, main/rtp_engine.c, main/parking.c,
	  main/bridge.c, res/res_jabber.c, res/res_http_websocket.c,
	  main/config.c, res/res_format_attr_opus.c, main/loader.c,
	  res/parking/parking_bridge.c, main/cdr.c, main/manager.c,
	  include/asterisk/astobj.h, main/bucket.c, apps/app_dumpchan.c,
	  main/app.c, res/res_pjsip/config_transport.c,
	  res/res_pjsip_refer.c, channels/chan_mgcp.c,
	  res/res_rtp_asterisk.c, main/slinfactory.c, main/core_unreal.c,
	  res/res_pjsip_sdp_rtp.c, res/res_crypto.c, main/acl.c,
	  channels/sig_pri.c, res/res_monitor.c, res/res_srtp.c,
	  main/data.c, res/res_corosync.c, channels/sip/config_parser.c,
	  res/res_fax_spandsp.c, apps/app_stack.c, main/asterisk.c,
	  main/udptl.c, res/res_sorcery_config.c, main/security_events.c,
	  res/res_timing_dahdi.c, res/res_pjsip_t38.c,
	  res/res_musiconhold.c, main/taskprocessor.c,
	  res/res_format_attr_h263.c, res/res_xmpp.c, res/res_pktccops.c,
	  funcs/func_hangupcause.c, channels/chan_phone.c,
	  main/manager_bridges.c, cel/cel_odbc.c, channels/chan_skinny.c,
	  channels/chan_motif.c, res/res_agi.c, main/logger.c,
	  funcs/func_srv.c, channels/chan_alsa.c, apps/app_confbridge.c,
	  res/res_pjsip_pubsub.c, channels/sip/include/sip.h, main/sched.c,
	  apps/app_adsiprog.c, main/pbx.c, channels/chan_sip.c,
	  res/res_fax.c, main/aoc.c, res/res_calendar_ews.c,
	  res/parking/parking_bridge_features.c, channels/iax2/parser.c,
	  main/callerid.c, main/file.c,
	  res/res_pjsip/pjsip_configuration.c, main/adsi.c,
	  main/config_options.c, pbx/pbx_dundi.c, funcs/func_iconv.c,
	  main/bridge_channel.c, res/res_odbc.c, channels/chan_pjsip.c,
	  res/parking/parking_manager.c, res/res_calendar.c, /,
	  funcs/func_sysinfo.c, main/utils.c, cdr/cdr_adaptive_odbc.c,
	  res/res_calendar_caldav.c, res/res_stasis_snoop.c,
	  res/res_format_attr_h264.c, main/channel.c, res/ael/pval.c,
	  res/res_ari_model.c, channels/chan_dahdi.c,
	  channels/sig_analog.c, funcs/func_frame_trace.c,
	  res/res_format_attr_silk.c, main/manager_channels.c,
	  apps/app_dial.c, res/res_calendar_icalendar.c, main/translate.c,
	  apps/app_queue.c, channels/chan_jingle.c, res/res_stun_monitor.c,
	  main/abstract_jb.c, res/res_stasis_recording.c, apps/app_sms.c,
	  main/event.c, apps/app_verbose.c, main/dsp.c,
	  channels/chan_unistim.c, main/frame.c, res/res_stasis_playback.c,
	  main/ccss.c, funcs/func_env.c, main/devicestate.c,
	  bridges/bridge_softmix.c, channels/chan_gtalk.c,
	  channels/chan_iax2.c, main/enum.c, main/cli.c,
	  res/res_format_attr_celt.c, apps/confbridge/conf_config_parser.c,
	  main/io.c, channels/pjsip/dialplan_functions.c,
	  res/res_config_odbc.c, res/res_pjsip/location.c,
	  res/res_pjsip_outbound_registration.c, formats/format_pcm.c,
	  apps/app_minivm.c, main/stdtime/localtime.c, main/stun.c: Allow
	  Asterisk to compile under GCC 4.10 This resolves a large number
	  of compiler warnings from GCC 4.10 which cause the build to fail
	  under dev mode. The vast majority are signed/unsigned mismatches
	  in printf-style format strings. ........ Merged revisions 413586
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 413587 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413588 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-09 18:15 +0000 [r413572]  Richard Mudgett <rmudgett@digium.com>

	* main/http.c: http.c: Remove dead code.

2014-05-09 17:03 +0000 [r413557]  Jonathan Rose <jrose@digium.com>

	* apps/app_chanspy.c, /: app_chanspy: Fix a bug where Barge mode
	  could fail If the barge audiohook was attached prior to the spyee
	  and its peer actually being bridged, the audiohook would not be
	  applied and the connected peer would not be able to hear audio
	  from the spy when the spy is in barge mode. (closes issue
	  ASTERISK-23381) Reported by: Robert Moss Review:
	  https://reviewboard.asterisk.org/r/3505/ ........ Merged
	  revisions 413551 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413556 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-08 00:36 +0000 [r413488]  Joshua Colp <jcolp@digium.com>

	* apps/app_queue.c, main/manager.c, /: app_queue: Extend
	  documentation for various Manager actions and events. ........
	  Merged revisions 413485 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413486 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413487 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-07 21:58 +0000 [r413469]  Mark Michelson <mmichelson@digium.com>

	* funcs/func_presencestate.c: Ensure that presence state is decoded
	  properly on Asterisk startup. The CustomPresence provider
	  callback will automatically base64 decode stored data if the 'e'
	  option was present when the state was set. However, since the
	  provider callback was bypassed on Asterisk startup, encoded
	  presence subtypes and messages were being sent instead. This fix
	  makes it so the provider callback is always used when providing
	  presence state updates.

2014-05-07 20:59 +0000 [r413453-413455]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_confbridge.c, /: app_confbridge: Fixed "CBAnn" channels
	  not going away. Fixed a ref leak in conf_handle_talker_cb()
	  everytime the conference bridge was found to report a channel's
	  talker status change. The resulting leak caused the "CBAnn"
	  channels and the conference bridge to never be destroyed. Thanks
	  to Richard Kenner on the asterisk-user's list for locating the
	  problem. Reported by: Richard Kenner ........ Merged revisions
	  413454 from http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/app_confbridge.c, /: app_confbridge: Fix ref leak in CLI
	  "confbridge kick" command. Fixed ref leak in the CLI "confbridge
	  kick" command when the channel to be kicked was not in the
	  conference. ........ Merged revisions 413451 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413452 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-07 17:56 +0000 [r413307-413399]  Mark Michelson <mmichelson@digium.com>

	* res/res_config_odbc.c, /: Fix encoding of custom prepare extra
	  data. Patches: res_config_odbc-take2.patch by John Hardin
	  (License #6512) ........ Merged revisions 413396 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413397 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413398 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip/presence_xml.c, /,
	  res/res_pjsip_pidf_digium_body_supplement.c: Improve XML
	  sanitization in NOTIFYs, especially for presence subtypes and
	  messages. Embedded carriage return line feed combinations may
	  appear in presence subtypes and messages since they may be
	  derived from user input in an instant messenger client. As such,
	  they need to be properly escaped so that XML parsers do not vomit
	  when the messages are received. ........ Merged revisions 413372
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_registrar.c, /: Check for an act on failures to
	  update contacts during registration. There was an underlying
	  issue in a realtime backend where database updates would fail.
	  Since we were not checking for failure, we would end up in a
	  strange state where the old database entry was still present but
	  Asterisk thought that it had been updated. Now when an entry
	  fails to update, we print a warning and delete the old contact
	  from sorcery so there is no mismatch between foreground and
	  backend state. Patches: res_pjsip_registrar.patch by John Hardin
	  (License #6512) ........ Merged revisions 413358 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_config_odbc.c, /: Ensure that all parts of SQL UPDATEs
	  and DELETEs are encoded. Patches: res_config_odbc.patch by John
	  Hardin (License #6512) ........ Merged revisions 413304 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413305 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413306 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-02 20:28 +0000 [r413227-413263]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_config_odbc.c: Prevent crashes in res_config_odbc due
	  to uninitialized string fields. Patches: odbc-crash.patch by John
	  Hardin (License #6512) ........ Merged revisions 413241 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413251 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413258 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_config_pgsql.c, /: Return the number of rows affected by
	  a SQL insert, rather than an object ID. The realtime API
	  specifies that the store callback is supposed to return the
	  number of rows affected. res_config_pgsql was instead returning
	  an Oid cast as an int, which during any nominal execution would
	  be cast to 0. Returning 0 when more than 0 rows were inserted
	  causes problems to the function's callers. To give an idea of how
	  strange code can be, this is the necessary code change to fix a
	  device state issue reported against chan_pjsip in Asterisk 12+.
	  The issue was that the registrar would attempt to insert contacts
	  into the database. Because of the 0 return from res_config_pgsql,
	  the registrar would think that the contact was not successfully
	  inserted, even though it actually was. As such, even though the
	  contact was query-able and it was possible to call the endpoint,
	  Asterisk would "think" the endpoint was unregistered, meaning it
	  would report the device state as UNAVAILABLE instead of
	  NOT_INUSE. The necessary fix applies to all versions of Asterisk,
	  so even though the bug reported only applies to Asterisk 12+, the
	  code correction is being inserted into 1.8+. Closes issue
	  ASTERISK-23707 Reported by Mark Michelson ........ Merged
	  revisions 413224 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 413225 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413226 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-02 16:39 +0000 [r413211]  Richard Mudgett <rmudgett@digium.com>

	* UPGRADE.txt, res/res_pjsip_refer.c, /, channels/chan_sip.c:
	  res_pjsip_refer: Add Referred-By header on INVITE for blind
	  transfers. Per rfc3892, the Referred-By header in a REFER must be
	  copied into the referenced request (IE. The outgoing INVITE to
	  the transfer target). * Automatically put the Referred-By header
	  in the outgoing INVITE message if the SIPREFERREDBYHDR channel
	  variable is defined with a value. * Made
	  chan_sip.c:get_refer_info() set SIPREFERREDBYHDR for inheritance
	  so chan_pjsip has a better chance to interoperate. * Fixed
	  refer_blind_callback() and refer_incoming_refer_request() to not
	  modify the data in the pointer returned by
	  pjsip_msg_find_hdr_by_name(). It seems wrong to modify that data
	  since the calling routine doesn't own the buffer. ASTERISK-23501
	  #close Reported by: John Bigelow Review:
	  https://reviewboard.asterisk.org/r/3514/ ........ Merged
	  revisions 413210 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-02 16:06 +0000 [r413197]  Jonathan Rose <jrose@digium.com>

	* res/parking/res_parking.h, /, CHANGES,
	  res/parking/parking_bridge_features.c,
	  res/parking/parking_manager.c: Parking: Add 'AnnounceChannel'
	  argument to manager action 'Park' (closes ASTERISK-23397)
	  Reported by: Denis Review:
	  https://reviewboard.asterisk.org/r/3446/ ........ Merged
	  revisions 413196 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-01 16:21 +0000 [r413174-413183]  Mark Michelson <mmichelson@digium.com>

	* funcs/func_presencestate.c: Make behavior of the PRESENCE_STATE
	  'e' option more consistent. When writing presence state, if 'e'
	  is specified, then the presence state will be stored in the astdb
	  encoded. However, consumers of presence state events or those
	  that query for the presence state will be given decoded
	  information. If base64 encoding is desired for consumers, then
	  the information can be base64-encoded manually and the 'e' option
	  can be omitted. closes issue ASTERISK-23671 Reported by Mark
	  Michelson Review: https://reviewboard.asterisk.org/r/3482

	* res/res_pjsip_exten_state.c, /: Remove unnecessary repetition
	  checks from res_pjsip_exten_state The PBX core already takes care
	  of ensuring that repeated state changes are not communicated to
	  exten state consumers. Because the check in res_pjsip_exten_state
	  was incomplete, it was causing valid presence state changes not
	  to be sent out. For instance, if the presence state did not
	  change but the message or subtype did, then no presence-related
	  NOTIFY request would be sent out. closes issue ASTERISK-23672
	  Reported by Mark Michelson ........ Merged revisions 413173 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-05-01 12:31 +0000 [r413160]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip/config_transport.c, /: res_pjsip: Add the ability
	  to configure ciphers based on name. Previously this code would
	  only accept the OpenSSL identifier instead of the documented
	  name. ASTERISK-23498 #close ASTERISK-23498 #comment Reported by:
	  Anthony Messina Review: https://reviewboard.asterisk.org/r/3491/
	  ........ Merged revisions 413159 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-30 21:03 +0000 [r413144]  Richard Mudgett <rmudgett@digium.com>

	* main/message.c, /, channels/chan_sip.c,
	  include/asterisk/message.h, res/res_pjsip_messaging.c:
	  chan_sip.c: Fixed off-nominal message iterator ref count and
	  alloc fail issues. * Fixed early exit in sip_msg_send() not
	  destroying the message iterator. * Made
	  ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
	  tolerant of a NULL iter parameter in case
	  ast_msg_var_iterator_init() fails. * Made
	  ast_msg_var_iterator_destroy() clean up any current message data
	  ref. * Made struct ast_msg_var_iterator,
	  ast_msg_var_iterator_init(), ast_msg_var_iterator_next(),
	  ast_msg_var_unref_current(), and ast_msg_var_iterator_destroy()
	  use iter instead of i. * Eliminated RAII_VAR usage in
	  res_pjsip_messaging.c:vars_to_headers(). ........ Merged
	  revisions 413139 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413142 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-30 20:39 +0000 [r413141]  Joshua Colp <jcolp@digium.com>

	* /, channels/chan_pjsip.c: chan_pjsip: Fix deadlock when
	  retrieving call-id of channel. If a task was in-flight which
	  required the channel or bridge lock it was possible for the
	  synchronous task retrieving the call-id to deadlock as it holds
	  those locks. After discussing with Mark Michelson the synchronous
	  task was removed and the call-id accessed directly. This should
	  be safe as each object involved is guaranteed to exist and the
	  call-id will never change. ........ Merged revisions 413140 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-30 13:08 +0000 [r413125]  Kinsey Moore <kmoore@digium.com>

	* res/res_http_websocket.c, /: Websocket: Add session locking and
	  delay close This resolves a race condition where data could be
	  written to a NULL FILE pointer causing a crash as a websocket
	  connection was in the process of shutting down by adding locking
	  to websocket session writes and by deferring session teardown
	  until session destruction. (closes issue ASTERISK-23605) Review:
	  https://reviewboard.asterisk.org/r/3481/ Reported by: Matt Jordan
	  ........ Merged revisions 413123 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413124 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-30 12:42 +0000 [r413118-413122]  Joshua Colp <jcolp@digium.com>

	* /, res/stasis/control.c: res_stasis: Add progress indications to
	  operations which perform media. This change fixes operations
	  which did not account for the fact that they may be executed on
	  channels which have not been answered. These operations will now
	  indicate progress when invoked. ASTERISK-23560 #close
	  ASTERISk-23560 #comment Reported by: Jan Svoboda Review:
	  https://reviewboard.asterisk.org/r/3495/ ........ Merged
	  revisions 413121 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_sdp_rtp.c: res_pjsip_sdp_rtp: Fix issue where
	  sending a hold SDP twice could cause an unhold. This change fixes
	  a bug where if an SDP with media address and sendonly was
	  received twice the underlying call would go off hold, instead of
	  remaining on hold. This occured because the code did not properly
	  take into account that the SDP may contain both a valid media
	  address and the sendonly attribute. The code now examines the
	  sendonly attribute and media address first, so if the SDP is
	  received again no change will occur. ASTERISK-23558 #comment
	  Reported by: John Bigelow Review:
	  https://reviewboard.asterisk.org/r/3472/ ........ Merged
	  revisions 413119 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_pjsip.c, res/res_pjsip_session.c, /: chan_pjsip:
	  Add support for picking up calls in the configured pickup group.
	  AST-1363 Review: https://reviewboard.asterisk.org/r/3478/
	  ........ Merged revisions 413117 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-29 15:10 +0000 [r413103]  George Joseph <george.joseph@fairview5.com>

	* /, include/asterisk/spinlock.h: Add "destroy" implementation for
	  spinlock. The original commit for spinlock was missing "destroy"
	  implementations. Most of them are no-ops but phtread_spin and
	  pthread_mutex do need their locks destroyed. ........ Merged
	  revisions 413102 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-29 11:27 +0000 [r413089]  Joshua Colp <jcolp@digium.com>

	* channels/chan_pjsip.c, /: chan_pjsip: Implement core ability to
	  get Call-ID of a channel. This changes implement the
	  "get_pvt_uniqueid" which is used to return the technology
	  specific unique identifier. In the case of SIP this is the
	  Call-ID of the dialog. Review:
	  https://reviewboard.asterisk.org/r/3480/ ........ Merged
	  revisions 413088 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-28 20:07 +0000 [r413074]  Kinsey Moore <kmoore@digium.com>

	* /, main/bridge.c, main/bridge_basic.c: Bridging: Don't lock NULL
	  bridges When bridge locking was added for bridge snapshot
	  creation, some locations where bridge locking was added were not
	  guaranteed to actually have a bridge and locking NULL AO2 objects
	  tends to cause segfaults. This ensures that NULL bridges aren't
	  locked. ........ Merged revisions 413073 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-28 14:40 +0000 [r413060]  Mark Michelson <mmichelson@digium.com>

	* res/res_manager_presencestate.c (added), main/devicestate.c,
	  CHANGES, main/presencestate.c, res/res_manager_devicestate.c
	  (added): Add DeviceStateChanged and PresenceStateChanged AMI
	  events. These events are controlled by two new modules,
	  res_manager_devicestate and res_manager_presencestate. Review:
	  https://reviewboard.asterisk.org/r/3417

2014-04-28 07:43 +0000 [r413048]  Igor Goncharovskiy <igor.goncharovsky@gmail.com>

	* UPGRADE.txt, CHANGES, channels/chan_unistim.c,
	  configs/unistim.conf.sample: Introducing changes proposed to
	  chan_unistim driver: 1) Added the unistim.conf variable
	  dtmf_duration which can select the DTMF playback duration from
	  0ms to 150ms (0 is off and is the new default) 2) Enabled the
	  transmission of month names, which are sent with the date and
	  changed the dateformat variable to accept the values 0-3 as per
	  the UNISTIM standard (2 & 3 match the previous 1 & 2 formats). 3)
	  Enabled the "Mute" packet so muting microphone works as expected
	  and microphone muted for all calls while LED light on 4) Changed
	  Duree to Timer on i2004 display (closes issue ASTERISK-23592)

2014-04-27 19:29 +0000 [r413036]  Olle Johansson <oej@edvina.net>

	* main/tcptls.c: tcptls.c : Log errors as ERROR, not warning or
	  something else.

2014-04-25 19:26 +0000 [r413012]  Matthew Jordan <mjordan@digium.com>

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Add support for DTLS
	  handshake retransmissions On congested networks, it is possible
	  for the DTLS handshake messages to get lost. This patch adds a
	  timer to res_rtp_asterisk that will periodically check to see if
	  the handshake has succeeded. If not, it will retransmit the DTLS
	  handshake. Review: https://reviewboard.asterisk.org/r/3337
	  ASTERISK-23649 #close Reported by: Nitesh Bansal patches:
	  dtls_retransmission.patch uploaded by Nitesh Bansal (License
	  6418) ........ Merged revisions 413008 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 413009 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-24 14:37 +0000 [r412993]  Kevin Harwell <kharwell@digium.com>

	* /,
	  contrib/ast-db-manage/config/versions/e96a0b8071c_increase_pjsip_column_size.py
	  (added): pjsip realtime: increase the size of some columns The
	  string lengths on certain columns created through alembic for
	  PJSIP were too short. For instance, columns containing URIs are
	  currently set to 40 characters, but this can be too small and
	  result in truncated values. Added an alembic migration script
	  that increases the size of these columns and a few others to 255.
	  ASTERISK-23639 #close Reported by: Mark Michelson Review:
	  https://reviewboard.asterisk.org/r/3475/ ........ Merged
	  revisions 412992 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-23 20:13 +0000 [r412977]  George Joseph <george.joseph@fairview5.com>

	* include/asterisk/spinlock.h (added), /, configure,
	  include/asterisk/autoconfig.h.in, configure.ac: This patch adds
	  support for spinlocks in Asterisk. There are cases in Asterisk
	  where it might be desirable to lock a short critical code section
	  but not incur the context switch and yield penalty of a mutex or
	  rwlock. The primary spinlock implementations execute exclusively
	  in userspace and therefore don't incur those penalties. Spinlocks
	  are NOT meant to be a general replacement for mutexes. They
	  should be used only for protecting short blocks of critical code
	  such as simple compares and assignments. Operations that may
	  block, hold a lock, or cause the thread to give up it's timeslice
	  should NEVER be attempted in a spinlock. The first use case for
	  spinlocks is in astobj2 - internal_ao2_ref. Currently the
	  manipulation of the reference counter is done with an
	  ast_atomic_fetchadd_int which works fine. When weak reference
	  containers are introduced however, there's an additional
	  comparison and assignment that'll need to be done while the lock
	  is held. A mutex would be way too expensive here, hence the
	  spinlock. Given that lock contention in this situation would be
	  infrequent, the overhead of the spinlock is only a few more
	  machine instructions than the current ast_atomic_fetchadd_int
	  call. ASTERISK-23553 #close Review:
	  https://reviewboard.asterisk.org/r/3405/ ........ Merged
	  revisions 412976 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-23 18:03 +0000 [r412925]  Richard Mudgett <rmudgett@digium.com>

	* /, main/http.c: http: Fix spurious ERROR message in responses
	  with no content. Backport -r411687 and fix the fix because
	  content_length is the length of out plus the length of the file
	  controlled by fd. When a response has an out content length of 0,
	  fwrite would be called to write a buffer with no data in it. This
	  resulted in the following classic error message: [Apr 3 11:49:17]
	  ERROR[26421] http.c: fwrite() failed: Success This patch makes it
	  so that we only attempt to write the content of out if the out
	  string is non-zero. ........ Merged revisions 412922 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 412923 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412924 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-23 15:02 +0000 [r412910]  Russell Bryant <russell@russellbryant.com>

	* res/res_monitor.c, funcs/func_periodic_hook.exports.in (added),
	  main/asterisk.dynamics, funcs/func_periodic_hook.c: Fix error
	  loading res_monitor. For some odd reason, loading app_mixmonitor
	  was fine, but res_monitor was not. This patch fixes a set of
	  issues related to func_periodic_hook exporting the beep functions
	  that gets res_monitor working again.

2014-04-22 10:09 +0000 [r412883]  Joshua Colp <jcolp@digium.com>

	* /, res/stasis/app.c: res_stasis: Fix crash when handling a failed
	  blind transfer message. This changes fixes a crash that occurs
	  when stasis determines if it should send a message out to an
	  application or not. The code incorrectly assumed that a bridge
	  snapshot would always be present when in reality for failure
	  cases it may not be. ASTERISK-23573 #close ........ Merged
	  revisions 412882 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-21 17:56 +0000 [r412759-412824]  Jonathan Rose <jrose@digium.com>

	* CHANGES, /: chan_sip: trust_id_outbound CHANGES message
	  improvement (closes issue AST-1301) (closes issue ASTERISK-19465)
	  Reported by: Krzysztof Chmielewski ........ Merged revisions
	  412821 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 412822 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412823 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c, configs/sip.conf.sample, CHANGES,
	  channels/sip/include/sip.h: chan_sip: Add sendrpid trust options
	  In r411189, some behavior was changed which made sendrpid
	  behavior act in a more trusting manner by sending full user data
	  for peers set with private caller presence in P-Asserted-Identity
	  headers. Since this changed long time expected behaviors, we
	  decided to pull that patch when that was pointed out by the
	  community. Instead, this patch provides a trust_id_outbound
	  setting which will expose the data per RFC-3325 if set to 'yes'
	  and simply not send the PAI/RPID headers at all if set to 'no'.
	  By default trust_id_outbound will be set to 'legacy' which will
	  preserve the behavior prior to these patches. Extra special
	  thanks to Walter Doekes for providing advice and feedback.
	  (closes issue AST-1301) (closes issue ASTERISK-19465) Reported
	  by: Krzysztof Chmielewski Review:
	  https://reviewboard.asterisk.org/r/3447/ ........ Merged
	  revisions 412744 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 412746 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412747 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-21 16:16 +0000 [r412729-412750]  Kinsey Moore <kmoore@digium.com>

	* main/http.c, main/manager.c, /: HTTP: Add TCP_NODELAY to accepted
	  connections This adds the TCP_NODELAY option to accepted
	  connections on the HTTP server built into Asterisk. This option
	  disables the Nagle algorithm which controls queueing of outbound
	  data and in some cases can cause delays on receipt of response by
	  the client due to how the Nagle algorithm interacts with TCP
	  delayed ACK. This option is already set on all non-HTTP AMI
	  connections and this change would cover standard HTTP requests,
	  manager HTTP connections, and ARI HTTP requests and websockets in
	  Asterisk 12+ along with any future use of the HTTP server.
	  Review: https://reviewboard.asterisk.org/r/3466/ ........ Merged
	  revisions 412745 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 412748 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412749 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/app_confbridge.c, /: Confbridge: Fix ConfbridgeKick AMI
	  documentation This adds documentation for the "all" channel
	  option for the ConfbridgeKick AMI action and adjusts AMI
	  responses accordingly. (issue ASTERISK-23282) Reported by: Dorian
	  Logan ........ Merged revisions 412730 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, apps/app_confbridge.c: Confbridge: Add references for kick all
	  option After the ability to kick all attendees from a conference
	  was added, a rework removed the comment about that feature from
	  the CLI documentation. This adds that documentation and adds
	  "all" to the participant tab completion list for the confbridge
	  kick command. (closes issue ASTERISK-23282) Reported by: Dorian
	  Logan ........ Merged revisions 412728 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-21 08:36 +0000 [r412714]  Igor Goncharovskiy <igor.goncharovsky@gmail.com>

	* /, channels/chan_unistim.c: Fix wrong dialtone. The "modulation"
	  should not be referenced for tone+tone as it refers to the on-off
	  characteristic - this often resulted in a single tone rather than
	  the multitone as in the UK. ........ Merged revisions 412712 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412713 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-19 02:14 +0000 [r412697-412699]  Matthew Jordan <mjordan@digium.com>

	* /, main/asterisk.c: main/asterisk: Fix startup sequence for
	  realtime features When ASTERISK-23265/ASTERISK-23320 was fixed,
	  it inadvertently led to realtime features breaking. This was due
	  to features loading prior to realtime. This patch fixes this by
	  loading features after loading dynamic modules. ASTERISK-23487
	  #close Reported by: Denis Tested by: Denis ........ Merged
	  revisions 412698 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, apps/app_sms.c: app_sms: Fix uninitialized values; hangup
	  channel when REL is sent successfully This patch fixes two issues
	  in app_sms: (1) Firstly, the 'flags' field on the stack in
	  sms_exec() is uninitialised, causing it to use the wrong protocol
	  in some cases. This patch correctly initializes the flags fields.
	  (2) Secondly, when disconnect supervision is not working or
	  inbanddisconnect=yes is set in chan_dahdi.conf, app_sms was
	  failing to terminate the call after it sent the REL(ease) message
	  and the peer stopped talking to it. This patch fixes the code to
	  handle the 'bad stop bit' message more gracefully in that case,
	  and hang up the call. Review:
	  https://reviewboard.asterisk.org/r/1392/ ASTERISK-18331 #close
	  Reported by: David Woodhouse patches: asterisk-fix-sms.patch
	  uploaded by David Woodhouse (License 5754) ........ Merged
	  revisions 412655 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 412656 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412657 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-18 20:09 +0000 [r412641]  Jonathan Rose <jrose@digium.com>

	* /, res/ari/resource_bridges.h, res/stasis/control.c,
	  include/asterisk/stasis_app.h, res/stasis/control.h,
	  res/ari/resource_channels.c, CHANGES, res/res_stasis.c,
	  rest-api/api-docs/bridges.json, res/ari/resource_bridges.c,
	  res/res_ari_bridges.c, res/res_stasis_playback.c: ARI: Make
	  bridges/{bridgeID}/play queue sound files Previously multiple
	  play actions against a bridge at one time would cause the sounds
	  to play simultaneously on the bridge. Now if a sound is already
	  playing, the play action will queue playback to occur after the
	  completion of other sounds currently on the queue. (closes issue
	  ASTERISK-22677) Reported by: John Bigelow Review:
	  https://reviewboard.asterisk.org/r/3379/ ........ Merged
	  revisions 412639 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-18 17:17 +0000 [r412589]  Rusty Newton <rnewton@digium.com>

	* sounds/sounds.xml, sounds/Makefile, /: sounds: Fix Sounds
	  Makefile and XML that didn't support new sound prompt sets In
	  sounds/Makefile 1 Adds and moves some lines necessary for the
	  en_GB core set. I'm just following how the other sets are defined
	  here. 2 removes the ES extra sounds related lines as we don't
	  have ES extra sound sets. In sounds/sounds.xml 3 Adds member
	  definitons for EN_AU, EN_GB, IT for core sound sets, and EN_GB in
	  extra sound sets ASTERISK-23550 #close Review:
	  https://reviewboard.asterisk.org/r/3464/ ........ Merged
	  revisions 412586 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412587 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-18 17:02 +0000 [r412584]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip/location.c: Allow for multiple contacts to be
	  configured in a single contact= line. This is useful for
	  configuring multiple permanent contacts for an AOR when using
	  realtime AORs. Review: https://reviewboard.asterisk.org/r/3462
	  ........ Merged revisions 412582 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-18 16:44 +0000 [r412580-412583]  Richard Mudgett <rmudgett@digium.com>

	* main/dial.c, main/pbx.c, /, apps/app_originate.c,
	  include/asterisk/pbx.h: Originated calls: Fix several originate
	  call problems. * Restore the reason value set by
	  pbx_outgoing_attempt() to use AST_CONTROL_xxx values as all the
	  consumers were expecting rather than cause codes. * Fixed the
	  dial routines to set cause codes for more than just ast_request()
	  so pbx_outgoing_attempt() reason codes will function. * Fix
	  inconsistent locked_channel return status in
	  pbx_outgoing_attempt(). The chanel may not have been locked or
	  the channel may have been a stale pointer. * Fixed the
	  OutgoingSpoolFailed channel to run dialplan whenever the dialing
	  fails for an originate exten and 1 < synchronous. * Fix incorrect
	  ast_cond_wait() usage in pbx_outgoing_attempt(). Indroduced by
	  issue ASTERISK-22212 patch. * Made struct pbx_outgoing use the
	  ao2 lock instead of its own lock for the cond wait mutex. No
	  sense in having two locks associated with the same struct when
	  only one is needed. Review:
	  https://reviewboard.asterisk.org/r/3421/ ........ Merged
	  revisions 412581 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis_channels.c, apps/app_queue.c, apps/app_dial.c, /:
	  app_dial and app_queue: Make lock the forwarding channel while
	  taking the channel snapshot. * Fixed
	  ast_channel_publish_dial_forward() not locking the forwarded
	  channel when taking the channel snapshot. * Fixed
	  app_dial.c:do_forward() using the wrong channel to get the
	  original call forwarding string. * Removed unnecessary locking
	  when calling ast_channel_publish_dial() and
	  ast_channel_publish_dial_forward() in app_dial and app_queue.
	  Holding channel locks when calling
	  ast_channel_publish_dial_forward() with a forwarded channel could
	  result in pausing the system while the stasis bus completes
	  processsing a forwarded channel subscription. Review:
	  https://reviewboard.asterisk.org/r/3451/ ........ Merged
	  revisions 412579 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-18 14:25 +0000 [r412566]  Kinsey Moore <kmoore@digium.com>

	* res/ari/ari_websockets.c, res/res_ari.c, main/manager.c, /: ARI:
	  Add debug logging for events and responses This adds DEBUG level
	  logging for ARI websocket events and HTTP responses similar to
	  what is available for AMI. Logging for ARI HTTP requests is
	  already adequate for debugging purposes. ........ Merged
	  revisions 412565 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-17 22:50 +0000 [r412552]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip/location.c, res/res_pjsip/pjsip_configuration.c,
	  res/res_pjsip/pjsip_options.c, res/res_pjsip.c,
	  res/res_pjsip_registrar.c: res_pjsip: Handle reloading when
	  permanent contacts exist and qualify is configured. This change
	  fixes a problem where permanent contacts being qualified were not
	  being updated. This was caused by the permanent contacts getting
	  a uuid and not a known identifier, causing an inability to look
	  them up when updating in the qualify code. A bug also existed
	  where the new configuration may not be available immediately when
	  updating qualifies. (closes issue ASTERISK-23514) Reported by:
	  Richard Mudgett Review: https://reviewboard.asterisk.org/r/3448/
	  ........ Merged revisions 412551 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-17 22:42 +0000 [r412536-412550]  Jonathan Rose <jrose@digium.com>

	* /, main/app.c: Fix a silly shadowed variable mistake that was
	  missed from play tones patch ........ Merged revisions 412549
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/ari/resource_bridges.h, main/app.c,
	  rest-api/api-docs/channels.json, CHANGES,
	  rest-api/api-docs/bridges.json, res/ari/resource_channels.h,
	  include/asterisk/app.h, res/res_stasis_playback.c: ARI: Add tones
	  playback resource Adds a tones URI type to the playback resource.
	  The tone can be specified by name (from indications.conf) or by a
	  tone pattern. In addition, tonezone can be specified in the URI
	  (by appending ;tonezone=<zone>). Tones must be stopped manually
	  in order for a stasis control to move on from playback of the
	  tone. Tones may be paused, resumed, restarted, and stopped. They
	  may not be rewound or fast forwarded (tones can't be controlled
	  in a way that lets you skip around from note to note and pausing
	  and resuming will also restart the tone from the beginning).
	  Tests are currently in development for this feature
	  (https://reviewboard.asterisk.org/r/3428/). (closes issue
	  ASTERISK-23433) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3427/ ........ Merged
	  revisions 412535 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-17 20:25 +0000 [r412467-412484]  Matthew Jordan <mjordan@digium.com>

	* channels/chan_oss.c, /, main/Makefile: main/Makefile: Fix build
	  failure on SmartOS/Illumos/SunOS This patch fixes two issues when
	  building on SmartOS: - channels/chan_oss.c: it makes sure
	  soundcard.h is found - main/Makefile: only use
	  "-Wl,--version-script" when GNU LD is used as the Sun Linker
	  doesn't support that. Similar checks are already used elswhere in
	  the Makefile Review: https://reviewboard.asterisk.org/r/3426
	  ASTERISK-23576 #close Reported by: Sebastian Wiedenroth patches:
	  fix-sunos.diff uploaded by Sebastian Wiedenroth (License 6597)
	  ........ Merged revisions 412468 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412483 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/sip/include/sip.h, channels/chan_sip.c, CHANGES:
	  chan_sip: Add SIPURIPHONECONTEXT channel variable for Request TEL
	  URIs This patch is a continuation of
	  https://reviewboard.asterisk.org/r/3349/, committed in r412303.
	  It resolves a finding oej had that the phone-context be available
	  in a channel variable separate from SIPDOMAIN. This patch adds
	  that variable as SIPURIPHONECONTEXT. It also allows a local
	  number (or global number specified in the TEL URI) to be used to
	  look up as a peer. (issue ASTERISK-17179) Review:
	  https://reviewboard.asterisk.org/r/3349/

2014-04-17 15:17 +0000 [r412454]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_refer.c, /: res_pjsip_refer: Channel variable
	  SIPREFERTOHDR not being set during blind transfer The
	  SIPREFERTOHDR channel variable is not being set on any channel
	  when performing a blind transfer using PJSIP. The
	  'refer->refer_to' was not being set during a blind transfer.
	  Updated so the 'refer_to' is set to the target uri on a blind
	  transfer. (closes issue ASTERISK-23502) Reported by: John Bigelow
	  Review: https://reviewboard.asterisk.org/r/3445/ ........ Merged
	  revisions 412453 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-16 19:14 +0000 [r412440]  Kinsey Moore <kmoore@digium.com>

	* /, include/asterisk/stasis_app.h: Stasis: Add a usage note on
	  stasis_app_get_bridge This function returns an ast_bridge without
	  a refcount bump and the caller must increment the count if it
	  intends to hold the pointer. (closes issue ASTERISK-23588)
	  Review: https://reviewboard.asterisk.org/r/3450/ Reported by:
	  Matt Jordan ........ Merged revisions 412439 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-15 23:21 +0000 [r412427]  Russell Bryant <russell@russellbryant.com>

	* bridges/bridge_builtin_features.c, include/asterisk/monitor.h,
	  CHANGES, apps/app_queue.c, funcs/func_periodic_hook.c,
	  apps/app_mixmonitor.c, include/asterisk/beep.h (added),
	  res/res_monitor.c: (mix)monitor: Add options to enable a periodic
	  beep Add an option to enable a periodic beep to be played into a
	  call if it is being recorded. If enabled, it uses the
	  PERIODIC_HOOK() function internally to play the 'beep' prompt
	  into the call at a specified interval. This option is provided
	  for both Monitor() and MixMonitor(). Review:
	  https://reviewboard.asterisk.org/r/3424/

2014-04-15 18:30 +0000 [r412384-412414]  Richard Mudgett <rmudgett@digium.com>

	* main/stasis_channels.c, main/features_config.c,
	  res/res_parking.c, main/rtp_engine.c, /: Eliminate some more
	  unnecessary RAII_VAR() uses. RAII_VAR() is not a hammer
	  appropriate to pound all nails. ........ Merged revisions 412413
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis_playback.c, /, res/stasis/app.c, res/res_fax.c,
	  res/res_pjsip/security_events.c,
	  res/parking/parking_applications.c, channels/chan_oss.c,
	  main/stasis_bridges.c, res/res_pjsip_session.c,
	  res/stasis_recording/stored.c, main/cdr.c, res/res_parking.c,
	  channels/chan_skinny.c, res/res_pjsip/location.c,
	  res/res_stasis_recording.c, main/stasis_channels.c,
	  res/ari/resource_channels.c, res/parking/parking_manager.c,
	  res/ari/resource_recordings.c, res/res_pjsip_refer.c,
	  res/res_ari.c, main/pbx.c: Remove unused RAII_VAR() declarations.
	  * Remove unused RAII_VAR() declarations. The compiler cannot
	  catch these because the cleanup function "references" the unused
	  variable. Some actually allocated and released resources that
	  were never used. * Fixed some whitespace issues in
	  stasis_bridges.c. ........ Merged revisions 412399 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/rtp_engine.h, main/rtp_engine.c, /,
	  channels/chan_sip.c: chan_sip.c: Fix channel staging assertion
	  failure. The failing assertion ensures that the final snapshot
	  gets generated so CDR records can get finalized. The only place
	  where a channel staging snapshot flag could be left set is in
	  chan_sip.c:handle_request_bye(). The function could return before
	  clearing the flag because the channel could dissappear while the
	  function had to have the channel unlocked. * Fixed
	  handle_request_bye() channel snapshot staging coverage area to
	  not have a return in the middle of it and be unable to clear the
	  staging flag. * Pushed the channel snapshot staging coverage area
	  into ast_rtp_instance_set_stats_vars() to ensure that the staging
	  is not interrutped. * Made callers of
	  ast_rtp_instance_set_stats_vars() not call it with any channels
	  or channel driver private locks held to eliminate the deadlock
	  potential. The callers must hold references to the passed in
	  channel and rtp objects. * Eliminated sip_hangup() trying to get
	  the bridge peer. It is futile at this point because the channel
	  could never be in a bridge. Review:
	  https://reviewboard.asterisk.org/r/3431/ ........ Merged
	  revisions 412385 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c: chan_sip.c: Moved some sip_pvt unrefs
	  after their last use. * Moved sip_pvt unref in ast_hangup() and
	  handle_request_do() to the end of the function. The unref needs
	  to happen after the last use of the pointer. ........ Merged
	  revisions 412348 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412383 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-15 16:13 +0000 [r412331]  Jonathan Rose <jrose@digium.com>

	* configs/sip.conf.sample, /, channels/chan_sip.c: Reverting
	  r411189 so that it can be put up for public review --- r411189 |
	  jrose | 2014-03-26 10:50:48 -0500 (Wed, 26 Mar 2014) | 12 lines
	  chan_sip: Send real CallerID information with
	  P-Assserted-Identity (RFC-3325) Prior to this patch, the
	  P-Asserted-Identity header would include anonymous caller id
	  information which seems to go against the point of the
	  P-Asserted-Identity header. Now the real caller ID information
	  will be included in this header. Also, no privacy header would be
	  included. This patch adds 'Privacy: id' to outgoing SIP messages
	  that include the P-Asserted-Identity header. (closes issue
	  AST-1301) --- ........ Merged revisions 412328 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 412329 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412330 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-14 15:54 +0000 [r412307]  Corey Farrell <git@cfware.com>

	* main/autoservice.c, /: autoservice: fix reference leak of logger
	  callid. autoservice acquires a local reference to the logger
	  callid of each channel in a loop. This local reference was not
	  released, causing the callid of every channel in autoservice to
	  leak. This change moves the callid unref inside the loop.
	  ASTERISK-23616 #close Reported by: ibercom ........ Merged
	  revisions 412305 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412306 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-12 02:27 +0000 [r412292]  Matthew Jordan <mjordan@digium.com>

	* channels/sip/reqresp_parser.c, CHANGES, channels/chan_sip.c:
	  chan_sip: Support RFC-3966 TEL URIs in inbound INVITE requests
	  This patch adds support for handling TEL URIs in inbound INVITE
	  requests. This includes the Request URI and the From URI. The
	  number specified in the Request URI will be the destination of
	  the inbound channel in the dialplan. The phone-context specified
	  in the Request URI will be stored in the TELPHONECONTEXT channel
	  variable. Review: https://reviewboard.asterisk.org/r/3349
	  ASTERISK-17179 #close Reported by: Geert Van Pamel Tested by:
	  Geert Van Pamel patches:
	  asterisk-12.0.0-chan_sip-RFC3966_patch.txt uploaded by Geert Van
	  Pamel (License 6140)
	  asterisk-12.0.0-reqresp_parser-RFC3966_patch.txt uploaded by
	  Geert Van Pamel (License 6140)

2014-04-12 01:35 +0000 [r412279-412280]  Russell Bryant <russell@russellbryant.com>

	* funcs/func_periodic_hook.c: func_periodic_hook: move module ref
	  The previous code left one error path where the module would be
	  unref'd twice instead of once. It was done once in the error
	  handling block, and again inside of datastore destruction. Now
	  the module ref is only released in the datastore destructor and
	  only acquired when the datastore has been successfully allocated.

	* funcs/func_periodic_hook.c: func_periodic_hook: add module ref
	  counting This module lacked necessary module ref count
	  incrementing and decrementing when used. This patch adds it.
	  There's already a datastore used, so doing the ref counting along
	  with the lifetime of the datastore provides a convenient place to
	  do it.

2014-04-11 21:43 +0000 [r412213-412228]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_stack.c, /: app_stack: Add missing unlock in off-nominal
	  path of STACK_PEEK function. ASTERISK-23620 #close Reported by:
	  Bradley Watkins Patches: ASTERISK-23620_unlock_oldlist.patch
	  (license #5021) patch uploaded by Bradley Watkins ........ Merged
	  revisions 412225 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 412226 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412227 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* utils/Makefile, utils: utils dir: Remove no longer needed traces
	  of refcounter except in the clean make target. * Removed no
	  longer needed files from the svn:ignore property to make them
	  visible.

2014-04-11 12:43 +0000 [r412194]  Kinsey Moore <kmoore@digium.com>

	* /, main/bridge.c, main/bridge_basic.c,
	  include/asterisk/stasis_bridges.h, tests/test_cel.c,
	  apps/app_confbridge.c, res/ari/resource_bridges.c: bridging:
	  Ensure locking during snapshot creation While the vast majority
	  of bridge snapshot creation is locked properly, there are
	  currently some instances that are not. This adds the missing
	  locking to ensure bridge state is not malleable during snapshot
	  creation. (closes issue ASTERISK-22904) Review:
	  https://reviewboard.asterisk.org/r/3415/ Reported by: Matt Jordan
	  ........ Merged revisions 412193 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-11 08:28 +0000 [r412168-412180]  Olle Johansson <oej@edvina.net>

	* main/audiohook.c: Formatting: Remove invisible characters

	* main/audiohook.c: Formatting only.

2014-04-11 02:59 +0000 [r412154]  Matthew Jordan <mjordan@digium.com>

	* main/astobj2.c, contrib/scripts/refcounter.py (added),
	  main/asterisk.c, utils/refcounter.c (removed),
	  build_tools/cflags.xml, utils/utils.xml, /, channels/chan_sip.c,
	  channels/sip/security_events.c, include/asterisk/astobj2.h,
	  UPGRADE.txt: main/astobj2: Make REF_DEBUG a menuselect item;
	  improve REF_DEBUG output This patch does the following: (1) It
	  makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
	  REF_DEBUG globally throughout Asterisk. (2) The ref debug log
	  file is now created in the AST_LOG_DIR directory. Every run will
	  now blow away the previous run (as large ref files sometimes
	  caused issues). We now also no longer open/close the file on each
	  write, instead relying on fflush to make sure data gets written
	  to the file (in case the ao2 call being performed is about to
	  cause a crash) (3) It goes with a comma delineated format for the
	  ref debug file. This makes parsing much easier. This also now
	  includes the thread ID of the thread that caused ref change. (4)
	  A new python script instead for refcounting has been added in the
	  contrib/scripts folder. (5) The old refcounter implementation in
	  utils/ has been removed. Review:
	  https://reviewboard.asterisk.org/r/3377/ ........ Merged
	  revisions 412114 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 412115 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 412153 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-11 01:12 +0000 [r412102]  Russell Bryant <russell@russellbryant.com>

	* res/res_monitor.c: monitor: use app options parsing helper code
	  This app is pretty ancient, so it was never converted to use the
	  option parsing helper code. I'd like to add an option to this app
	  that takes an argument, and that's a pain to do when not using
	  this helper, so start by doing this conversion. Review:
	  https://reviewboard.asterisk.org/r/3429/

2014-04-10 21:28 +0000 [r412089]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_hep_pjsip.c: res_hep_pjsip: Use the channel name
	  instead of the call ID when it is available During discussions
	  with Alexandr Dubovikov at Kamailio World, it became apparent
	  that while the SIP call ID is a useful identifier prior to an
	  Asterisk channel being created, it is far more preferable to use
	  the channel name (or some channel based identifier) when the
	  channel is available. Homer is smart enough to tie the various
	  messages together. This patch opts to use the channel name when
	  it is available, falling back to the call ID otherwise. ........
	  Merged revisions 412088 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-10 21:10 +0000 [r412075]  Kevin Harwell <kharwell@digium.com>

	* /, res/res_pjsip_pubsub.c: res_pjsip_pubsub: Set the body
	  generation result to 0 for a valid path The result of the
	  "ast_sip_pubsub_generate_body_content" was not set/initialized.
	  Consequently, the nominal path potentially returned an invalid
	  value, thus not sending mwi notifications. ........ Merged
	  revisions 412074 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-09 21:43 +0000 [r412050]  Mark Michelson <mmichelson@digium.com>

	* /, CHANGES, apps/app_mixmonitor.c: Add a Command header to the
	  AMI Mixmonitor action. This fixes a parsing error that occurred
	  during the processing of the AMI action. The error did not result
	  in MixMonitor itself misbehaving, but it could result in the AMI
	  response not giving correct information back. The new header
	  allows for one to specify a post-process command to run when
	  recording finishes. Previously, in order to do this, the
	  post-process command would have to be placed at the end of the
	  Options: header. Patches: mixmonitor_command_2.patch by jhardin
	  (License #6512) ........ Merged revisions 412048 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-09 18:17 +0000 [r412035]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_stasis_answer.c: res_stasis_answer: Add missing
	  newlines ........ Merged revisions 412034 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-08 21:25 +0000 [r411946-411990]  Richard Mudgett <rmudgett@digium.com>

	* /, main/asterisk.c: Internal timing: Add notice that the -I and
	  internal_timing option are no longer needed. Add notice messages
	  during execution that the -I command line option and the
	  astersik.conf internal_timing option are no longer needed. The
	  internal timing functionality is now always enabled if there is a
	  timing module loaded. NOTE: Since the command line options and
	  the asterisk.conf config file are processed before the logging
	  system is initialized, the messages are output to stderr. Change
	  requested as a result of asterisk-dev list comments about the
	  commit for ASTERISK-22846 that removed the -I and internal_timing
	  options. Review: https://reviewboard.asterisk.org/r/3423/
	  ........ Merged revisions 411964 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411974 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411985 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/config.c, /: config: Fix CB_ADD_LEN() to work as originally
	  intended. Fix a long standing bug in CB_ADD_LEN() behaving like
	  CB_ADD(). ASTERISK-23546 #close Reported by: Walter Doekes
	  ........ Merged revisions 411960 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411961 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411962 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/confbridge/conf_config_parser.c, /: app_confbridge: Fix
	  confbridge.conf dsp_talking_threshold option setting wrong
	  parameter. Fixed copy pasta error. ASTERISK-23545 #close Reported
	  by: John Knott ........ Merged revisions 411944 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411945 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-08 14:49 +0000 [r411928]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip.c: res_pjsip: Ignore explicit transport
	  configuration if a WebSocket transport is specified. This change
	  makes it so if a transport is configured on an endpoint that is a
	  WebSocket type the option will be ignored. In practice this is
	  fine because the WebSocket transport can not create outgoing
	  connections, it can only reuse existing ones. By ignoring the
	  option the existing PJSIP logic for using the existing connection
	  will be invoked and stuff will proceed. (closes issue
	  ASTERISK-23584) Reported by: Rusty Newton ........ Merged
	  revisions 411927 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-08 00:26 +0000 [r411897]  Russell Bryant <russell@russellbryant.com>

	* funcs/func_periodic_hook.c: func_periodic_hook: List more modules
	  as dependencies This module makes use of some existing Asterisk
	  components. app_chanspy was already listed as a dependency. There
	  are a few function modules used, as well, so list them.

2014-04-07 20:41 +0000 [r411884]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_pjsip_pubsub.c: PJSIP: Ensure test event has new state
	  The change that fixed the pubsub test event's use of a dangling
	  pointer also changed when it was processed relative to the pjsip
	  subscription state change processing. This change corrects the
	  order of events while holding a reference to the pointer that was
	  previously dangling. ........ Merged revisions 411883 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-07 16:15 +0000 [r411870]  Jonathan Rose <jrose@digium.com>

	* main/manager_channels.c, /: AGI/Manager: Prevent multiple
	  NewExten events during AGI application changes AGI applications
	  would trigger NewExten events every time the state of the AGI
	  application changed. This has historically not been the behavior
	  and this behavior was introduced with a CDR patch. This patch
	  corrects that. (closes issue ASTERISK-23390) Reported by:
	  Benjamin Keith Ford Review:
	  https://reviewboard.asterisk.org/r/3406/ ........ Merged
	  revisions 411868 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-07 14:57 +0000 [r411812]  Walter Doekes <walter+asterisk@wjd.nu>

	* apps/app_queue.c, /: app_queue: Re-add HoldTime to
	  QueueCallerAbandon event (simple typo during ast12 refactor).
	  Reported by: Ibrahim22 (on IRC) Tested by: Ibrahim22 ........
	  Merged revisions 411811 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-07 14:29 +0000 [r411791-411806]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_stasis.c: Stasis: Fix Stasis() bridge refcount issue
	  The Stasis() dialplan application monitors what bridge a channel
	  is in and so necessarily holds on to a bridge pointer. This
	  change ensures that it also holds on to a reference for that
	  bridge to prevent the bridge pointer from becoming a dangling
	  pointer. ........ Merged revisions 411804 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_pubsub.c, /: PJSIP: Fix crash introduced in r411671
	  The test event introduced in revision 411671 uses a dangling
	  pointer to access information about pubsub state changes. This
	  moves the event to within the lifetime of the pointer. ........
	  Merged revisions 411790 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-05 13:06 +0000 [r411768]  Russell Bryant <russell@russellbryant.com>

	* CHANGES, funcs/func_periodic_hook.c (added): func_periodic_hook:
	  New function for periodic hooks. This commit introduces a new
	  dialplan function, PERIODIC_HOOK(). It allows you run to a
	  dialplan hook on a channel periodically. The original use case
	  that inspired this was the ability to play a beep periodically
	  into a call being recorded. The implementation is much more
	  generic though and could be used for many other things. The
	  implementation makes heavy use of existing Asterisk components.
	  It uses a combination of Local channels and ChanSpy() to run some
	  custom dialplan and inject any audio it generates into an active
	  call. The other important bit of the implementation is how it
	  figures out when to trigger the beep playback. This
	  implementation uses the audiohook API, even though it's not
	  actually touching the audio in any way. It's a convenient way to
	  get a callback and check if it's time to kick off another beep.
	  It would be nice if this was timer event based instead of polling
	  based, but unfortunately I don't see a way to do it that won't
	  interfere with other things. Review:
	  https://reviewboard.asterisk.org/r/3362/

2014-04-04 19:19 +0000 [r411702-411724]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/options.h, main/asterisk.c, main/channel.c, /,
	  channels/chan_sip.c, configs/asterisk.conf.sample, UPGRADE.txt,
	  include/asterisk/channel.h, utils/extconf.c: internal_timing:
	  Remove the option and always make it enabled if a timing module
	  is loaded. The masquerade supertest frequently fails because
	  either the local channel chain doesn't completely optimize out or
	  the DTMF handshake doesn't completely get accross. Local channel
	  optimization requires frames flowing to trigger when optimization
	  can happen. When optimization happens the media frame that
	  triggered the optimization is dropped. Sending DTMF requires
	  frames to flow in the other direction for timing purposes while
	  sending nothing. If internal timing is not enabled when MOH is
	  playing, Asterisk switches to received timing when an audio frame
	  is received. With optimization dropping media frames and MOH not
	  sending frames unless it receives frames, occasionaly there are
	  no more frames being passed and the test fails. * The asterisk
	  command line -I option and the asterisk.conf internal_timing
	  option are removed. Asterisk now always uses internal timing when
	  needed if any timing module is loaded. The issue ASTERISK-14861
	  did this quite awhile ago in v1.4 but effectively is broken if
	  other internal timing modules besides DAHDI are used. The
	  ast_read_generator_actions() now only does received timing if it
	  has no choice for frame generators like MOH, silence, and
	  playback streaming. * Cleaned up some code dealing with frame
	  generators in ast_deactivate_generator(),
	  generator_write_format_change(), ast_activate_generator(), and
	  ast_channel_stop_silence_generator(). * Removed
	  ast_internal_timing_enabled(), AST_OPT_FLAG_INTERNAL_TIMING, and
	  ast_opt_internal_timing. ASTERISK-22846 #close Reported by: Matt
	  Jordan Review: https://reviewboard.asterisk.org/r/3414/ ........
	  Merged revisions 411715 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411716 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411717 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/utils.c, res/res_musiconhold.c, main/channel.c,
	  main/stasis_cache.c, /: Add some asserts that were handy when
	  looking for a stasis cache problem. * Assert if a channel is
	  destroyed but has the snapshot staging flag set. In this case the
	  final channel destruction snapshot would never get taken. *
	  Assert if what we just got out of the stasis cache is not what we
	  were looking for. This assert would have saved several days
	  searching for a bug and a lot of my hair. * Assert if the music
	  on hold message posts could not find the associated channel. A
	  crash will happen later when manager tries to send the MOH AMI
	  message. This assert catches the problem when the stasis message
	  is posted instead of by the thread processing the defective
	  message. * Always generate a backtrace when an ast_assert()
	  fails. Review: https://reviewboard.asterisk.org/r/3411/ ........
	  Merged revisions 411701 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-04 15:13 +0000 [r411688]  Matthew Jordan <mjordan@digium.com>

	* /, main/http.c: http: Fix spurious ERROR message in responses
	  with no content When a response has a content length of 0, fwrite
	  would be called to write a buffer with no data in it. This
	  resulted in the following classic error message: [Apr 3 11:49:17]
	  ERROR[26421] http.c: fwrite() failed: Success This patch makes it
	  so that we only attempt to write out the content if the
	  calculated content_length is non-zero. ........ Merged revisions
	  411687 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-03 12:06 +0000 [r411671]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_pjsip_pubsub.c: res_pjsip_pubsub: Add test event for
	  state change This adds a test event when subscription state
	  changes so that integration tests may trigger new actions at the
	  appropriate times. Review:
	  https://reviewboard.asterisk.org/r/3383/ ........ Merged
	  revisions 411670 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-03 11:47 +0000 [r411669]  Matthew Jordan <mjordan@digium.com>

	* res/res_hep.c, /: res_hep: Fix crash when hep.conf not available
	  Parts of res_hep properly checked for a valid configuration
	  object before attempting to access the configuration. A check,
	  however, was missed when a packet is sent. This patch fixes the
	  crash caused by not checking if the configuration object is
	  valid. ........ Merged revisions 411668 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-02 18:57 +0000 [r411656]  Mark Michelson <mmichelson@digium.com>

	* main/sorcery.c, /, res/res_mwi_external.c,
	  res/res_pjsip/config_system.c, configs/sorcery.conf.sample,
	  main/bucket.c, include/asterisk/sorcery.h,
	  res/res_pjsip/pjsip_configuration.c, tests/test_sorcery_astdb.c,
	  tests/test_sorcery.c, tests/test_sorcery_realtime.c: Prevent
	  duplicate sorcery wizards from being applied to sorcery object
	  types. This commit contains several changes to sorcery: 1)
	  Application of sorcery configuration based on module name is
	  automatically performed when sorcery is opened for a module. 2)
	  Sorcery will not attempt to apply the same wizard to an object
	  type more than once. 3) Sorcery gives more exact results when
	  attempting to apply a wizard, whether as the default or based on
	  configuration. Sorcery unit tests still pass for me after making
	  these changes. Review: https://reviewboard.asterisk.org/r/3326
	  ........ Merged revisions 411159 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-01 22:42 +0000 [r411637-411639]  Richard Mudgett <rmudgett@digium.com>

	* res/parking/parking_bridge.c, /: res_parking: Minor tweaks. * Use
	  ast_bridge_channel_lock()/ast_bridge_channel_unlock() instead of
	  ao2_lock()/ao2_unlock() for struct ast_bridge_channel variables.
	  * Use ast_copy_string() instead of inlining it. * Remove an
	  already done TODO comment. * Some whitespace tweaks. ........
	  Merged revisions 411638 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis_channels.c, /: stasis_channels.c: Eliminate another
	  overuse of RAII_VAR(). ........ Merged revisions 411636 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-04-01 16:52 +0000 [r411587]  Joshua Colp <jcolp@digium.com>

	* /, apps/app_queue.c: app_queue: Fix a bug where realtime members
	  would be deleted during reload causing waiting callers to get
	  ejected. This patch causes realtime queue members to remain in
	  queues during the reload process. Previously these members would
	  be removed causing any waiting callers to be ejected from the
	  queue with a reason of "EXITEMPTY". ASTERISK-23547 #close
	  ASTERISK-23547 #comment Patch
	  app_queue_fix_realtime_reload_1.8_trunk.patch submitted by Italo
	  Rossi (license 6409) Review:
	  https://reviewboard.asterisk.org/r/3404/ ........ Merged
	  revisions 411584 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411585 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411586 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-28 18:32 +0000 [r411556]  Matthew Jordan <mjordan@digium.com>

	* include/asterisk/res_hep.h (added), res/res_hep_pjsip.c (added),
	  res/res_hep.exports.in (added), configs/hep.conf.sample (added),
	  CHANGES, res/res_hep.c (added), /: res_hep/res_hep_pjsip: Add a
	  HEPv3 capture agent module and a logger for PJSIP This patch adds
	  the following: (1) A new module, res_hep, which implements a
	  generic packet capture agent for the Homer Encapsulation Protocol
	  (HEP) version 3. Note that this code is based on a patch provided
	  by Alexandr Dubovikov; I basically just wrapped it up, added
	  configuration via the configuration framework, and threw in a
	  taskprocessor. (2) A new module, res_hep_pjsip, which forwards
	  all SIP message traffic that passes through the res_pjsip stack
	  over to res_hep for encapsulation and transmission to a HEPv3
	  capture server. Much thanks to Alexandr for his Asterisk patch
	  for this code and for a *lot* of patience waiting for me to port
	  it to 12/trunk. Due to some dithering on my part, this has taken
	  the better part of a year to port forward (I still blame CDRs for
	  the delay). ASTERISK-23557 #close Review:
	  https://reviewboard.asterisk.org/r/3207/ ........ Merged
	  revisions 411534 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-28 18:00 +0000 [r411533]  Alexandr Anikin <may@telecom-service.ru>

	* addons/ooh323c/src/ooh323.c, addons/ooh323c/src/ooGkClient.c,
	  addons/chan_ooh323.c, /, addons/ooh323c/src/oochannels.c,
	  addons/ooh323c/src/ooCmdChannel.c, addons/ooh323c/src/ooq931.c:
	  process stack command even if gatekeeper client isn't register
	  don't destroy gatekeeper client if it is not started don't
	  destroy gatekeeper client in some sort of gatekeeper errors
	  signal rtp create condition when call cleared before rtp
	  structure created (closes issue ASTERISK-23460) Reported by:
	  Dmitry Melekhov Patches: ASTERISK-23460-2.patch Tested by: Dmitry
	  Melekhov ........ Merged revisions 411531 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411532 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-28 17:41 +0000 [r411515-411530]  Matthew Jordan <mjordan@digium.com>

	* rest-api/api-docs/channels.json,
	  rest-api/api-docs/recordings.json,
	  rest-api/api-docs/endpoints.json, rest-api/api-docs/events.json,
	  /, rest-api/api-docs/playbacks.json, UPGRADE.txt,
	  rest-api/api-docs/sounds.json, rest-api/resources.json, CHANGES,
	  include/asterisk/manager.h, rest-api/api-docs/bridges.json,
	  rest-api/api-docs/deviceStates.json,
	  rest-api/api-docs/mailboxes.json,
	  rest-api/api-docs/asterisk.json,
	  rest-api/api-docs/applications.json: Update API versions and
	  UPGRADE/CHANGES for 12.2.0 This patch does the following: * It
	  updates the AMI version to 2.2.0 to indicate backwards compatible
	  changes have been made since the last release * It updates the
	  ARI version to 1.2.0 to indicate backwards compatible changes
	  have been made since the last release * It updates the
	  UPGRADE/CHANGES files with changes that were not mentioned
	  ........ Merged revisions 411529 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* UPGRADE.txt, res/res_config_odbc.c: res_config_odbc: Fix for
	  nullable integer columns and keyfield existence check in
	  update_odbc. This patch fixes setting nullable integer columns to
	  NULL instead of an empty string, which fails for PostgreSQL, for
	  example. The current code is supposed to do so, but the check is
	  broken. The patch also allows the first column in the list to be
	  a nullable integer. Also, the check for existence of a mandatory
	  column checked for the first column in the list instead of the
	  key field lookup column. This patch fixes that issue as well.
	  Finally, the compatibility option allow_empty_string_in_nontext,
	  which was added to previous revisions to allow for some database
	  backends with certain schemas to function, has been removed.
	  Review: https://reviewboard.asterisk.org/r/3335 ASTERISK-23459
	  #close ASTERISK-23351 #close (closes issue ASTERISK-23459)
	  Reported by: zvision patches: res_config_odbc.diff uploaded by
	  zvision (License 5755)

2014-03-28 16:18 +0000 [r411469]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/tcptls.c, main/manager.c, /, main/http.c: http: response
	  body often missing after specific request This patch works around
	  a problem with the HTTP body being dropped from the response to a
	  specific client and under specific circumstances: a) Client
	  request comes from node.js user agent "Shred" via use of
	  swagger-client library. b) Asterisk and Client are *not* on the
	  same host or TCP/IP stack In testing this problem, it has been
	  determined that the write of the HTTP body is lost, even if the
	  data is written using low level write function. The only solution
	  found is to instruct the TCP stack with the shutdown function to
	  flush the last write and finish the transmission. See review for
	  more details. ASTERISK-23548 #close (closes issue ASTERISK-23548)
	  Reported by: Sam Galarneau Review:
	  https://reviewboard.asterisk.org/r/3402/ ........ Merged
	  revisions 411462 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411463 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411465 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-28 15:48 +0000 [r411375-411460]  Matthew Jordan <mjordan@digium.com>

	* UPGRADE.txt, /: UPGRADE: Note IAX2 compatibility issue between
	  1.4 and 1.8+ systems. ........ Merged revisions 411457 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411458 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411459 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* contrib/realtime/mysql/voicemail_messages.sql (removed),
	  contrib/realtime/postgresql/realtime.sql (removed),
	  contrib/realtime/mysql/voicemail_data.sql (removed),
	  contrib/realtime/mysql/musiconhold.sql (removed),
	  contrib/realtime/mysql/queue_log.sql (removed),
	  contrib/realtime/mysql/voicemail.sql (removed),
	  contrib/realtime/mysql/sippeers.sql (removed), /,
	  contrib/realtime/mysql/iaxfriends.sql (removed),
	  contrib/realtime/mysql/meetme.sql (removed): contrib/realtime:
	  Remove empty SQL script files Since the relatime scripts are now
	  managed by Alembic, the previous realtime scripts were previously
	  removed. However, the removal process messed up, as the files
	  were still in the repository. The contents were just empty. This
	  removes the files from the tree. ........ Merged revisions 411442
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/sip/include/sip.h: chan_sip: Add MESSAGE request to
	  allowed methods The allowed methods advertised by chan_sip did
	  not previously note the MESSAGE request. Even in Asterisk 1.8, we
	  do accept in-dialog MESSAGE requests; we should advertise that we
	  support MESSAGE requests. ASTERISK-23504 #close ASTERISK-23504
	  #comment Reported by: Martin Kontsek ASTERISK-23504 #comment
	  Patch sip.h_patch.diff uploaded by Martin Kontsek (license 6587)
	  Review: https://reviewboard.asterisk.org/r/3396/ ........ Merged
	  revisions 411372 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411373 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411374 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-27 19:21 +0000 [r411312-411328]  Corey Farrell <git@cfware.com>

	* funcs/func_global.c, apps/app_speech_utils.c,
	  apps/confbridge/conf_config_parser.c,
	  funcs/func_callcompletion.c, funcs/func_frame_trace.c,
	  funcs/func_callerid.c, main/message.c, /, res/res_mutestream.c,
	  channels/pjsip/dialplan_functions.c,
	  res/res_pjsip_header_funcs.c, funcs/func_pitchshift.c,
	  funcs/func_groupcount.c, funcs/func_volume.c, funcs/func_odbc.c,
	  funcs/func_channel.c, funcs/func_cdr.c, funcs/func_blacklist.c,
	  apps/app_stack.c, apps/app_voicemail.c, res/res_calendar.c,
	  apps/app_jack.c, funcs/func_dialplan.c, funcs/func_speex.c,
	  channels/chan_sip.c, funcs/func_math.c, funcs/func_strings.c,
	  funcs/func_jitterbuffer.c, res/res_xmpp.c, channels/chan_iax2.c,
	  main/features_config.c, res/res_jabber.c: Fix dialplan function
	  NULL channel safety issues (closes issue ASTERISK-23391) Reported
	  by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3386/ ........ Merged
	  revisions 411313 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411314 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411315 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/format.c, include/asterisk.h, /: main/formats: Fix crash in
	  ast_format_cmp during non-clean shutdown. * Update asterisk.h to
	  reflect availability of ast_register_cleanup in 11.9. * Use
	  ast_register_cleanup for format_attr_shutdown. (closes issue
	  ASTERISK-23103) Reported by: JoshE ........ Merged revisions
	  411310 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........ Merged revisions 411311 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-27 14:21 +0000 [r411296]  Mark Michelson <mmichelson@digium.com>

	* main/sorcery.c, /: Give sorcery instances a reference to their
	  wizards. On graceful shutdown, sorcery wizards are all killed
	  off, but it is possible for sorcery instances to still have
	  dangling pointers after this, possibly causing a crash. Giving
	  the sorcery instances a reference to their wizards ensures that
	  the wizard reference will remain valid for the lifetime of the
	  sorcery instance. Review: https://reviewboard.asterisk.org/r/3401
	  ........ Merged revisions 411295 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-26 22:45 +0000 [r411246]  Joshua Colp <jcolp@digium.com>

	* /, main/say.c: say: Fix a bug where SayNumber in Polish tries to
	  play incorrect sound. This change fixes a bug where calling
	  SayNumber with a number divisible by 100 using the Polish
	  language would cause the code to attempt to play a sound file
	  with an empty name. (closes issue ASTERISK-23509) Reported by:
	  zvision Review: https://reviewboard.asterisk.org/r/3378/ ........
	  Merged revisions 411243 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411244 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411245 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-26 16:15 +0000 [r411194]  Jonathan Rose <jrose@digium.com>

	* /, channels/chan_sip.c, configs/sip.conf.sample: chan_sip: Send
	  real CallerID information with P-Assserted-Identity (RFC-3325)
	  Prior too this patch, the P-Asserted-Identity header would
	  include anonymous caller id information which seems to go against
	  the point of the P-Asserted-Identity header. Now the real caller
	  ID information will be included in this header. Also, no privacy
	  header would be included. This patch adds 'Privacy: id' to
	  outgoing SIP messages that include the P-Asserted-Identity
	  header. (closes issue AST-1301) ........ Merged revisions 411189
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 411190 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411193 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-26 16:05 +0000 [r411192]  Richard Mudgett <rmudgett@digium.com>

	* /,
	  contrib/ast-db-manage/config/versions/4c573e7135bd_fix_tos_field_types.py:
	  Fix 'alembic branches' merge conflict as described by the web
	  page. ........ Merged revisions 411191 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-25 18:44 +0000 [r411174]  Sean Bright <sean@malleable.com>

	* /, res/ari/config.c: ARI: Don't complain about missing ARI users
	  when we aren't enabled Currently, if ARI is not enabled it will
	  still complain that there are no configured users. This patch
	  checks to see if ARI is enabled before logging and error or
	  iterating the container to validate the users. Review:
	  https://reviewboard.asterisk.org/r/3391/ ........ Merged
	  revisions 411173 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-25 17:40 +0000 [r411158]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip/pjsip_configuration.c, UPGRADE.txt,
	  res/res_pjsip_messaging.c, res/res_pjsip.c,
	  include/asterisk/res_pjsip.h: Add a "message_context" option for
	  PJSIP endpoints. ........ Merged revisions 411157 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-25 16:57 +0000 [r411142]  Richard Mudgett <rmudgett@digium.com>

	* res/res_pjsip/pjsip_options.c, res/res_pjsip.c,
	  include/asterisk/res_pjsip.h, /: res_pjsip: Fix contact
	  authenticate_qualify endpoint lookup when qualifing a contact. *
	  Fixed bad use of ao2_find() in on_endpoint(). * Replaced use of
	  find_endpoints() with find_an_endpoint() since only the first
	  found endpoint is ever needed. * Fixed qualify_contact_cb() to
	  update the contact with the aor authenticate_qualify setting.
	  Otherwise, permanent contacts in the aor type sections would have
	  a config line order dependancy. * Fixed off nominal path contact
	  ref leak in qualify_contact(). The comment saying the unref is
	  not needed was wrong. * Fixed off nominal path use of the
	  endpoint parameter if it is NULL in send_out_of_dialog_request().
	  * Added missing off nominal path unref of pjsip tdata in
	  send_out_of_dialog_request(). * Fixed off nominal path failing to
	  call the callback in send_request_cb() when the request is
	  challenged for authentication. * Eliminated silly RAII_VAR() use
	  in qualify_contact_cb(). * Updated ast_sip_send_request() doxygen
	  to better reflect reality. (closes issue ASTERISK-23254) Reported
	  by: rmudgett Review: https://reviewboard.asterisk.org/r/3381/
	  ........ Merged revisions 411141 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-25 16:06 +0000 [r411092]  Kinsey Moore <kmoore@digium.com>

	* /, channels/chan_sip.c: chan_sip: Fix incorrect use of timers If
	  update_provisional_keepalive() is called while
	  send_provisional_keepalive_full() is waiting on the PVT lock,
	  then pvt->provisional_keepalive_sched_id will be changed to a new
	  sched_id value by update_provisional_keepalive(), but that new
	  sched_id then may be overwritten with -1 by
	  send_provisional_keepalive_full(), killing the pvt's reference to
	  a schedule and "leaking" the reference. (closes issue
	  ASTERISK-22079) Review: https://reviewboard.asterisk.org/r/3368/
	  Reported by: Jamuel Starkey, Matteo, Leif Madsen, Steve Davies
	  Patches: provisional_keepalive_fix.diff uploaded by Steve Davies
	  (license 5012) ........ Merged revisions 411088 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411089 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411091 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-25 15:56 +0000 [r411090]  Jonathan Rose <jrose@digium.com>

	* /, res/res_stasis.c: ARI: Resolve a subscription leak against
	  implicit bridge subscriptions When a channel in a stasis
	  application is joined to a bridge, a subscription for that bridge
	  is created implicitly for the stasis application serving the
	  channel. Prior to this patch, subsequent removals of the channel
	  from the bridge would leave the subscription open. Review:
	  https://reviewboard.asterisk.org/r/3380/ ........ Merged
	  revisions 411086 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-25 15:47 +0000 [r411073-411087]  Richard Mudgett <rmudgett@digium.com>

	* utils/conf2ael.c, main/lock.c, utils/ael_main.c: Revert -r411073.
	  It didn't help and blew up the system.

	* utils/ael_main.c, utils/conf2ael.c, main/lock.c: locking: Add
	  temporary sanity checks. Add some temporary sanity checks to hunt
	  for locking problems with the masquerade supertest.

2014-03-24 21:39 +0000 [r411024]  Joshua Colp <jcolp@digium.com>

	* /, channels/chan_sip.c: chan_sip: Always use fromdomain if set
	  for domain, even if callerid is set to restricted. (closes issue
	  ASTERISK-20841) Reported by: Kelly Goedert ........ Merged
	  revisions 411021 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 411022 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 411023 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-21 16:04 +0000 [r410996]  Richard Mudgett <rmudgett@digium.com>

	* /, res/res_pjsip_registrar.c: res_pjsip_registrar.c:
	  Miscellaneous cleanup in rx_task(). * Fix variable shadowing of
	  'updated' by renaming it to 'contact_update'. * Checked
	  'contact_update' for ast_sorcery_copy() failure. * Removed silly
	  use of RAII_VAR() for 'contact_update'. ........ Merged revisions
	  410995 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-21 15:50 +0000 [r410981-410994]  Sean Bright <sean@malleable.com>

	* res/ael/ael.flex, utils/Makefile, pbx/pbx_ael.c,
	  res/ael/ael_lex.c: Make the AEL load process less chatty.
	  Switched a bunch of LOG_NOTICEs to ast_debug. This time without
	  breaking the build.

	* pbx/pbx_ael.c, res/ael/ael_lex.c, res/ael/ael.flex: Revert
	  r410981. aelparse blew up.

	* main/config.c: Remove a LOG_NOTICE from
	  ast_config_engine_register. There is enough indication from the
	  CLI that we are loading a realtime engine as it is.

	* pbx/pbx_ael.c, res/ael/ael_lex.c, res/ael/ael.flex: Make the AEL
	  load process less chatty. Switched a bunch of LOG_NOTICEs to
	  ast_debug.

2014-03-20 23:02 +0000 [r410967]  Jonathan Rose <jrose@digium.com>

	* apps/app_confbridge.c, /: app_confbridge: Fix bug - users with
	  startmuted set don't start muted (closes issue ASTERISK-23461)
	  Reported by: Chico Manobela Review:
	  https://reviewboard.asterisk.org/r/3373/ ........ Merged
	  revisions 410965 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410966 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-20 16:35 +0000 [r410950]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/rtp_engine.h, main/dial.c, main/manager.c, /,
	  main/channel_internal_api.c, main/core_unreal.c,
	  include/asterisk/channel.h, res/ari/resource_channels.c,
	  res/res_stasis_snoop.c: assigned-uniqueids: Miscellaneous cleanup
	  and fixes. * Fix memory leak in ast_unreal_new_channels(). Made
	  it generate the ;2 uniqueid on a stack variable instead of
	  mallocing it. * Made send error response to ARI and AMI requests
	  instead of just logging excessive uniqueid length and allowing
	  truncation. action_originate() and
	  ari_channels_handle_originate_with_id(). * Fixed minor truncating
	  uniqueid hole when generating the ;2 uniqueid string length.
	  Created public and internal lengths of uniqueid. The internal
	  length can handle a max public uniqueid plus an appended ;2. *
	  free() and ast_free() are NULL tolerant so they don't need a NULL
	  test before calling. * Made use better struct initialization
	  format instead of the position dependent initialization format.
	  Also anything not explicitly initialized in the struct is
	  initialized to zero by the compiler. * Made
	  ast_channel_internal_set_fake_ids() use the safer
	  ast_copy_string() instead of strncpy(). Review:
	  https://reviewboard.asterisk.org/r/3371/ ........ Merged
	  revisions 410949 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-19 17:27 +0000 [r410934]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip_endpoint_identifier_ip.c: PJSIP: Allow for
	  identify sections to be specified in sorcery.conf. "identify" is
	  a special type of configuration object in PJSIP because unlike
	  the other objects, it is not provided by the base res_pjsip
	  module. Instead, it is provided by the
	  res_pjsip_endpoint_identifier_ip module. If using the default
	  sorcery wizard (config,criteria=type=identify) then things work
	  because the module that applies the default wizard is the correct
	  module. However, if attempting to use sorcery.conf to apply an
	  alternate wizard, it was not possible. If you attempted to
	  specify the identify object type in the res_pjsip section, then
	  the object could not be registered since the object was
	  undocumented for the res_pjsip module. There was no alternate
	  configuration section defined for it, so you were out of luck if
	  you wanted to override the default wizard. With this change, the
	  identify section will properly have a sorcery.conf-based wizard
	  applied when the identify definition is within the
	  res_pjsip_endpoint_identifier_ip section. ........ Merged
	  revisions 410933 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-19 14:25 +0000 [r410905-410919]  Joshua Colp <jcolp@digium.com>

	* res/res_stasis.c, /: res_stasis: Fix a bug where the default
	  bridge type was not set. ........ Merged revisions 410918 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* CHANGES, res/res_stasis.c, rest-api/api-docs/bridges.json, /,
	  res/ari/resource_bridges.h: res_stasis: Extend bridge type to be
	  a comma separated list of bridge attributes. This change turns
	  the bridge type field into a comma separated list of attributes.
	  These attributes include: mixing, holding, dtmf_events, and
	  proxy_media. By setting the various attributes a user can control
	  the type of bridge created with the behavior they need for their
	  application. (closes issue ASTERISK-23437) Reported by: Matt
	  Jordan Review: https://reviewboard.asterisk.org/r/3359/ ........
	  Merged revisions 410904 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-19 02:33 +0000 [r410891]  Matthew Jordan <mjordan@digium.com>

	* res/res_ari.c, /: res_ari: Fix documentation schema error
	  ........ Merged revisions 410890 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-18 23:32 +0000 [r410877]  Rusty Newton <rnewton@digium.com>

	* res/res_ari.c, /: res_ari: Add notes about Asterisk HTTP server
	  to the "enabled" config option for the res_ari general section
	  Added note and see-also reminding user to enable the HTTP server.
	  (closes issue ASTERISK-22499) Reported by: Rusty Newton ........
	  Merged revisions 410876 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-18 15:45 +0000 [r410863]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, main/http.c: ARI: allow json content type with zero length
	  body When a request was received with a Content-type of json, the
	  body was sent for json parsing - even if it was zero length. This
	  resulted in ARI requests failing that were valid, such as a
	  channel DELETE with no parameters. The code has now been changed
	  to skip json parsing with zero content length. (closes issue
	  SWP-6748) Reported by: Samuel Galarneau Review:
	  https://reviewboard.asterisk.org/r/3360/ ........ Merged
	  revisions 410858 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-18 15:28 +0000 [r410862]  Matthew Jordan <mjordan@digium.com>

	* main/cdr.c, /: cdr: Add asserts for when we don't know about a
	  CDR for a channel In the CDR core, every channel should either be
	  filtered out (due to being an 'internal' channel used as an
	  implementation detail, such as playing media back into a bridge)
	  or it should get a CDR. Even if that CDR ends up being discarded,
	  we still give the channel a CDR in case we end up needing it. If
	  we hit a situation where a channel does not have a CDR, we should
	  blow up in -dev-mode. Asserts are appropriate for that. This
	  patch adds those asserts, as they would have quickly caught the
	  error fixed by r410814. ........ Merged revisions 410861 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-18 12:45 +0000 [r410845]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip/config_system.c: res_pjsip: Fix memory leak of
	  nameservers in off-nominal resolver creation failure. Thanks
	  Walter Doekes! ........ Merged revisions 410844 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-18 11:52 +0000 [r410831]  Sean Bright <sean@malleable.com>

	* res/res_fax_spandsp.c, /: res_fax_spandsp: Use g711_free() when
	  available. Per Johann Steinwendtner on the asterisk-dev mailing
	  list:
	  http://lists.digium.com/pipermail/asterisk-dev/2014-March/066102.html
	  g711_free() was introduced in spandsp 0.0.6pre4 and
	  g711_release() became a noop. I opted not to remove the call to
	  g711_release() since it is harmless and to call g711_free() if we
	  have a sufficiently recent version of spandsp. (issue
	  ASTERISK-20149) Reported by: Alexandr Gordeev ........ Merged
	  revisions 410829 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410830 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-18 02:09 +0000 [r410814]  Richard Mudgett <rmudgett@digium.com>

	* main/stasis_cache.c, /: stasis_cache: Use the right variable in
	  the cache entry ao2 cmp function. ........ Merged revisions
	  410813 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-17 22:54 +0000 [r410794-410796]  Joshua Colp <jcolp@digium.com>

	* include/asterisk/dns.h, CHANGES,
	  res/res_pjsip/include/res_pjsip_private.h, res/res_pjsip.c,
	  main/dns.c, /, res/res_pjsip/config_system.c: res_pjsip: Enable
	  PJSIP DNS client support. This change enables DNS client support
	  within PJSIP. System nameservers are automatically discovered
	  using res_init or res_ninit. If this fails then PJSIP will resort
	  to using gethostbyname for resolution. By enabling this support
	  we gain SRV support, failover, and weight support. (closes issue
	  ASTERISK-23435) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3343/ ........ Merged
	  revisions 410795 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_multihomed.c, /: res_pjsip_multihomed: Make address
	  replacement less aggressive. This change makes the
	  res_pjsip_multihomed module less aggressive when changing the
	  address in messages. It will now only occur if the transport in
	  use is bound to the any address OR if the system determined
	  source address matches the bound address of the transport in use.
	  Review: https://reviewboard.asterisk.org/r/3369/ ........ Merged
	  revisions 410793 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-17 22:24 +0000 [r410775]  Russ Meyerriecks <rmeyerreicks@digium.com>

	* /, main/callerid.c: callerid: Logic error in checksum processing
	  Callerid checksum-ing was being handled incorrectly here. When
	  the checksum is calculated to be 0x00, it will perform 0x100-0x00
	  which results in 0x100. This value will then fail the otherwise
	  correct callerid message. This patch changes the logic to simply
	  add the calculated checksum to the transmitted 2's compliment
	  checksum. Review: https://reviewboard.asterisk.org/r/3356/
	  (closes issue ASTERISK-23488) ........ This is a merge of merged
	  revisions 410750 410747 from
	  http://svn.asterisk.org/svn/asterisk/branches/12 I didn't want a
	  broken patch to be comitted to trunk so I pre-merge merged them.

2014-03-17 19:35 +0000 [r410684-410699]  Mark Michelson <mmichelson@digium.com>

	* res/res_mwi_external.c, res/res_pjsip/config_system.c,
	  configs/sorcery.conf.sample, include/asterisk/sorcery.h,
	  res/res_pjsip/pjsip_configuration.c, tests/test_sorcery_astdb.c,
	  tests/test_sorcery.c, tests/test_sorcery_realtime.c,
	  main/sorcery.c, /: Revert changes to sorcery that accidentally
	  got committed. These changes were still up for review and have
	  not been approved yet. I must have had the changes in my working
	  copy when making a different change. ........ Merged revisions
	  410696 from http://svn.asterisk.org/svn/asterisk/branches/12

	* bridges/bridge_softmix.c, tests/test_sorcery.c, main/channel.c,
	  res/res_pjsip/config_system.c, res/res_mwi_external.c,
	  include/asterisk/bridge_channel.h, funcs/func_frame_trace.c,
	  configs/sorcery.conf.sample, res/res_pjsip/pjsip_configuration.c,
	  include/asterisk/sorcery.h, tests/test_sorcery_astdb.c,
	  include/asterisk/frame.h, main/bridge_channel.c,
	  tests/test_sorcery_realtime.c, main/sorcery.c,
	  res/res_stasis_playback.c, main/frame.c, /: Fix stuck channel in
	  ARI through the introduction of synchronous bridge actions.
	  Playing back a file to a channel in an ARI bridge would attempt
	  to wait until the playback concluded before returning. The method
	  used involved signaling the waiting thread in the ARI custom
	  playback function. The problem with this is that there were some
	  corner cases that were not accounted for: * If a bridge channel
	  could not be found, then we never would attempt the playback but
	  would still attempt to wait for the playback to complete. * If
	  the bridge playfile action failed to queue, we would still
	  attempt to wait for the playback to complete. * If the bridge
	  playfile action were queued but some circumstance caused the
	  playback not to occur (the bridge dies, the channel is removed
	  from the bridge), then we would never be notified. The solution
	  to this is to move the waiting logic into the bridge code. A new
	  bridge API function is added to queue a synchronous action on a
	  bridge. The waiting thread is notified when the queued frame has
	  been freed, either due to an error occurring or due to successful
	  playback. As a failsafe, the waiting thread has a 10 minute
	  timeout just in case there is a frame leak somewhere. Review:
	  https://reviewboard.asterisk.org/r/3338 ........ Merged revisions
	  410673 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-17 16:48 +0000 [r410672]  Richard Mudgett <rmudgett@digium.com>

	* /, apps/confbridge/conf_chan_announce.c: app_confbridge: Add
	  missing destructor call to announcer channel destructor. ........
	  Merged revisions 410671 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-16 20:27 +0000 [r410651]  Matthew Jordan <mjordan@digium.com>

	* /, res/stasis/app.c: stasis/app.c: Add some extra debugging for
	  subscription counts Events are sent to a connected ARI
	  application based on the things that ARI application cares about.
	  These subscriptions can be set up implicitly - such as when that
	  ARI application creates a new object - or explicitly, via the
	  application resource's subscription operations. Debugging *why*
	  something was being sent to an application - or why something was
	  not being sent to an application - was a bit tricky, as there was
	  no debug information for the subscriptions. This patch adds some
	  debug level 3 statements that show the subscription counts for
	  applications. (Level 3 was chosen as it matches the verbose level
	  3 statements elsewhere) ........ Merged revisions 410650 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-15 15:24 +0000 [r410639]  Russell Bryant <russell@russellbryant.com>

	* include/asterisk/framehook.h: framehook.h: Fix some doc typos.
	  There were a number of instances in this header file where
	  "function all" was intended to be "function call". This patch
	  fixes that up.

2014-03-14 21:56 +0000 [r410626]  Mark Michelson <mmichelson@digium.com>

	* /, tests/test_sorcery_realtime.c: Fix failing realtime sorcery
	  tests. The store realtime callback needs to return a positive
	  value for sorcery to treat the store as a success. ........
	  Merged revisions 410625 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-14 21:36 +0000 [r410624]  Jonathan Rose <jrose@digium.com>

	* main/manager.c, /: manager: fix memory leak in manager_add_filter
	  function (closes issue ASTERISK-23420) Reported by: Etienne
	  Lessard Patches: manager_eventfilter_leak uploaded by Etienne
	  Lessard (license 6394) ........ Merged revisions 410609 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410623 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-14 20:55 +0000 [r410591-410608]  Mark Michelson <mmichelson@digium.com>

	* /, main/db.c: Remove an extra ast_cond_wait() that slipped
	  through the patch. ........ Merged revisions 410606 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410607 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/config.c, res/res_sorcery_realtime.c: Handle the return
	  values of realtime updates and stores more accurately. Realtime
	  backends' update and store callbacks return the number of rows
	  affected, or -1 if there was a failure. There were a couple of
	  issues: * The config API was treating 0 as a successful return,
	  and positive values as a failure. Now the config API treats
	  anything >= 0 as a success. * res_sorcery_realtime was treating 0
	  as a successful return from the store procedure, and any positive
	  values as a failure. Now sorcery treats anything > 0 as a
	  success. It still considers 0 a "failure" since there is no
	  change to report to observers. Review:
	  https://reviewboard.asterisk.org/r/3341 ........ Merged revisions
	  410592 from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_mwi.c: Prevent conflicts regarding unsolicited
	  and solicited MWI to an endpoint. If an endpoint is receiving
	  unsolicited MWI for a mailbox and then attempts to subscribe to
	  an AOR that provides MWI for the same mailbox, then the SUBSCRIBE
	  is rejected with a 500 response. Review:
	  https://reviewboard.asterisk.org/r/3345 ........ Merged revisions
	  410590 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-14 17:56 +0000 [r410589]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, CHANGES: uniqueid: Update CHANGES to reflect new features Note
	  the new features provided by uniqueid in the CHANGES file. (issue
	  ASTERISK-23120) Review: https://reviewboard.asterisk.org/r/3316/
	  ........ Merged revisions 410588 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-14 16:42 +0000 [r410575]  Jonathan Rose <jrose@digium.com>

	* /, main/acl.c, res/res_pjsip/pjsip_configuration.c,
	  contrib/ast-db-manage/config/versions/4c573e7135bd_fix_tos_field_types.py,
	  CHANGES, res/res_pjsip/config_transport.c,
	  include/asterisk/acl.h: PJSIP: TOS values should be represented
	  as decimals in sorcery objects (closes issue ASTERISK-23235)
	  Reported by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3324/ ........ Merged
	  revisions 410574 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-14 16:19 +0000 [r410567]  Mark Michelson <mmichelson@digium.com>

	* /, main/db.c: Prevent delayed astdb syncs. The syncing thread
	  sleeps for a second before waiting to be told to attempt to sync
	  again. If a signal were sent during this sleeping period, we
	  would end up having to wait until the next sync signal occurred
	  in order to sync up the astdb. This code rearrangement also
	  ensures that any pending transactions will be synced prior to
	  Asterisk shutting down. Patches: db_sync.patch by John Hardin
	  (License #6512) ........ Merged revisions 410556 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410559 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-14 16:17 +0000 [r410560]  Jonathan Rose <jrose@digium.com>

	* res/ari/resource_bridges.c, /: ARI/bridges: Forward
	  Playback/Recording Started/Finished to bridge topic (closes issue
	  ASTERISK-23444) Reported by: Ben Merrills Review:
	  https://reviewboard.asterisk.org/r/3340/ ........ Merged
	  revisions 410558 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-14 16:01 +0000 [r410542-410557]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/app.h, /, res/res_mwi_external.c, main/app.c:
	  res_mwi_external: Clear the stasis cache entry when the external
	  MWI is deleted. One of the things missing when external MWI
	  support was added was the ability to clear the stasis cache entry
	  of deleted external MWI mailboxes. Review:
	  https://reviewboard.asterisk.org/r/3325/ ........ Merged
	  revisions 410555 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/cdr.c: cdr.c: Add missing aow_unlock(cdr) in off nominal
	  path of handle_dial_message(). * Trivial common code hoisting in
	  handle_bridge_leave_message(). * Some whitespace fixing. ........
	  Merged revisions 410541 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-13 19:33 +0000 [r410528]  Kinsey Moore <kmoore@digium.com>

	* res/stasis/control.h, res/res_stasis.c, /, res/stasis/control.c:
	  ARI: Ensure managing application receives ChannelEnteredBridge
	  messages This fixes an issue where a Stasis application running
	  over ARI and subscribed to ari/events could miss the
	  ChannelEnteredBridge event because it did not subscribe to the
	  new bridge fast enough. To accomplish this, it subscribes the
	  application controlling the channel to the new bridge before
	  adding it to that bridge which required the stasis_app_control
	  structure to maintain a reference to the stasis_app. (closes
	  issue ASTERISK-23295) Review:
	  https://reviewboard.asterisk.org/r/3336/ ........ Merged
	  revisions 410527 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-13 13:25 +0000 [r410511]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_multihomed.c, /: Multiple revisions 410509-410510
	  ........ r410509 | file | 2014-03-13 06:23:14 -0700 (Thu, 13 Mar
	  2014) | 2 lines res_pjsip_multihomed: Fix a bug where the 200 OK
	  for a REGISTER would contain the wrong contact. ........ r410510
	  | file | 2014-03-13 06:24:17 -0700 (Thu, 13 Mar 2014) | 2 lines
	  res_pjsip_multihomed: Remove change for testing fix. ........
	  Merged revisions 410509-410510 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-12 19:06 +0000 [r410492-410494]  Richard Mudgett <rmudgett@digium.com>

	* res/res_musiconhold.c, main/channel.c, /: res_musiconhold.c:
	  Generate MOH start/stop events whenever the MOH stream is
	  started/stopped. * Made res_musiconhold.c always post the
	  MusicOnHoldStart/MusicOnHoldStop events when it actually
	  starts/stops the music streams. This allows the events to always
	  happen when MOH starts/stops. The event posting code was moved to
	  the MOH alloc/release routines. * Made channel_do_masquerade()
	  stop any MOH on the original channel before masquerading so the
	  original channel will get a stop event with correct information.
	  * Cleaned up a couple odd codings in moh_files_alloc() and
	  moh_alloc() dealing with the music state variable. (issue
	  ASTERISK-23311) Reported by: Benjamin Keith Ford Review:
	  https://reviewboard.asterisk.org/r/3306/ ........ Merged
	  revisions 410493 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/confbridge/conf_state.c,
	  apps/confbridge/conf_state_single.c,
	  apps/confbridge/conf_state_inactive.c,
	  apps/confbridge/conf_state_single_marked.c, /: app_confbridge:
	  Make explicitly stop MOH if a user is kicked or hangs up while
	  MOH is playing. When MOH is playing to a user in a conference and
	  the user is kicked or hangs up from the conference then the AMI
	  MusicOnHoldStop events didn't happen. (Asterisk v11 AMI event:
	  MusicOnHold, state:Stop) (closes issue ASTERISK-23311) Reported
	  by: Benjamin Keith Ford Review:
	  https://reviewboard.asterisk.org/r/3306/ ........ Merged
	  revisions 410490 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410491 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-12 12:51 +0000 [r410452-410472]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_multihomed.c, /: res_pjsip_multihomed: Fix a bug
	  where outgoing messages for TCP would go out using UDP. This
	  change fixes a bug where the code which changes the transport did
	  not check whether the message is going out over UDP or not before
	  changing it. For TCP and TLS transports we don't need to change
	  the transport as the correct one is already chosen. ........
	  Merged revisions 410471 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_multihomed.c (added), /: res_pjsip_multihomed: Add
	  module which places the correct address within messages. Due to
	  how messages are handled within PJSIP it is not until a message
	  is actually sent that the destination is reliably known. This
	  means that the addresses placed within the message may not be of
	  the interface the message is being sent out on. This module
	  determines what interface a message is being sent on and updates
	  the message to contain the correct address if applicable. This
	  module was tested by myself in a virtualized environment with
	  multiple interfaces and also by Kinsey Moore in the following
	  configuration: Networks: * 10.24.16.0/21 ** hard phone ** default
	  gateway * 10.24.64.0/21 ** softphone with pjsip-based stack
	  Transport details: bind address: 0.0.0.0 protocol: UDP All
	  endpoints were tested with explicitly configured transports and
	  unconfigured transports. This was tested with inbound and
	  outbound calls, both of which were experiencing detrimental
	  effects from incorrect IP addresses in SIP messages. These
	  effects were only experienced by the soft phone on the 10.24.64.0
	  network since the messages to the hard phone on the 10.24.16.0
	  network had the correct IP address. (closes issue ASTERISK-23020)
	  Reported by: xrobau Review:
	  https://reviewboard.asterisk.org/r/3102/ ........ Merged
	  revisions 410451 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-10 17:21 +0000 [r410395]  Richard Mudgett <rmudgett@digium.com>

	* /, main/http.c: AST-2014-001: Stack overflow in HTTP processing
	  of Cookie headers. Sending a HTTP request that is handled by
	  Asterisk with a large number of Cookie headers could overflow the
	  stack. Another vulnerability along similar lines is any HTTP
	  request with a ridiculous number of headers in the request could
	  exhaust system memory. (closes issue ASTERISK-23340) Reported by:
	  Lucas Molas, researcher at Programa STIC, Fundacion; and Dr.
	  Manuel Sadosky, Buenos Aires, Argentina ........ Merged revisions
	  410380 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 410381 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410383 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-10 16:33 +0000 [r410369]  Scott Griepentrog <sgriepentrog@digium.com>

	* res/ari/resource_channels.c, main/manager.c, /: unqiueid: correct
	  max uniqueid length test This patch adds null string test prior
	  to checking for a max uniqueid value that was added in r410157.
	  ........ Merged revisions 410368 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-10 13:30 +0000 [r410346]  Kinsey Moore <kmoore@digium.com>

	* /, channels/chan_sip.c: AST-2014-002: chan_sip: Exit early on bad
	  session timers request This change allows chan_sip to avoid
	  creation of the channel and consumption of associated file
	  descriptors altogether if the inbound request is going to be
	  rejected anyway. (closes issue ASTERISK-23373) Reported by: Corey
	  Farrell Patches: chan_sip-earlier-st-1.8.patch uploaded by Corey
	  Farrell (license 5909) chan_sip-earlier-st-11.patch uploaded by
	  Corey Farrell (license 5909) ........ Merged revisions 410308
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 410311 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410329 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-10 12:53 +0000 [r410307]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip/pjsip_options.c, res/res_pjsip.c: AST-2014-003:
	  res_pjsip: When handling 401/407 responses don't assume a request
	  will have an endpoint. This change removes the assumption that an
	  outgoing request will always have an endpoint and makes the
	  authenticate_qualify option work once again. (closes issue
	  ASTERISK-23210) Reported by: Joshua Colp ........ Merged
	  revisions 410306 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-08 16:50 +0000 [r410288]  George Joseph <george.joseph@fairview5.com>

	* res/res_pjsip/config_auth.c, /, res/res_pjsip/location.c,
	  res/res_pjsip_outbound_registration.c,
	  res/res_pjsip_endpoint_identifier_ip.c,
	  include/asterisk/res_pjsip_cli.h, include/asterisk/sorcery.h,
	  res/res_pjsip/pjsip_cli.c, res/res_pjsip/pjsip_configuration.c,
	  res/res_pjsip/config_transport.c, main/sorcery.c,
	  include/asterisk/res_pjsip.h: pjsip_cli: Create pjsip show
	  channel and contact, and general cli code cleanup. Created the
	  'pjsip show channel' and 'pjsip show contact' commands.
	  Refactored out the hated ast_hashtab. Replaced with
	  ao2_container. Cleaned up function naming. Internal only, no
	  public name changes. Cleaned up whitespace and brace formatting
	  in cli code. Changed some NULL checking from "if"s to
	  ast_asserts. Fixed some register/unregister ordering to reduce
	  deadlock potential. Fixed ast_sip_location_add_contact where the
	  'name' buffer was too short. Fixed some self-assignment issues in
	  res_pjsip_outbound_registration. (closes issue ASTERISK-23276)
	  Review: http://reviewboard.asterisk.org/r/3283/ ........ Merged
	  revisions 410287 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-08 15:45 +0000 [r410275]  Matthew Jordan <mjordan@digium.com>

	* /, res/ari/resource_channels.c: resource_channels: Check if a
	  passed in ID is NULL before checking its length Calling strlen on
	  a NULL string is explosive. This patch checks whether or not the
	  passed in string is NULL or zero length before checking to see if
	  the string is too long. ........ Merged revisions 410274 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-07 22:56 +0000 [r410227]  Corey Farrell <git@cfware.com>

	* /, channels/chan_sip.c: chan_sip: Fix deadlock of monlock between
	  unload_module and do_monitor Release monlock before calling
	  pthread_join. This ensures do_monitor cannot freeze by locking
	  monlock during module unload. (closes issue ASTERISK-21406)
	  Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3284/ ........ Merged
	  revisions 410224 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 410225 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410226 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-07 22:08 +0000 [r410212]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, include/asterisk/sorcery.h: sorcery: correct field register
	  argument list This fixes mistakes I previously made in merging
	  gtjoseph's changes with mine. ........ Merged revisions 410211
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-07 21:54 +0000 [r410208-410210]  Matthew Jordan <mjordan@digium.com>

	* /, main/config_options.c: config_options: Display the see-also
	  information for CLI config option help The config option help
	  information has always parsed the <see-also> tags in the XML
	  documentation. Unfortunately, it just never bothered displaying
	  them on the CLI. With this patch, when you execute 'config show
	  help [module] [obj] [option]', it will display what other options
	  are useful to you. (closes issue ASTERISK-22008) Reported by:
	  Richard Mudgett ........ Merged revisions 410209 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip.c, /: res_pjsip: Fix documentation for one touch
	  recording see-also links The one touch recording options have
	  several see-also links between the various configuration options.
	  These were 'broken' by the snake casing of those options. This
	  patch corrects the see-also links such that they reference the
	  correct option names. ........ Merged revisions 410194 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-07 21:23 +0000 [r410207]  Mark Michelson <mmichelson@digium.com>

	* main/sorcery.c, res/res_sorcery_realtime.c, /,
	  include/asterisk/sorcery.h, tests/test_sorcery_realtime.c: Make
	  res_sorcery_realtime filter unknown retrieved results. When
	  retrieving data from a database or other realtime backend, it's
	  quite possible to retrieve variables that Asterisk does not care
	  about but that are legitimate to exist. Asterisk does not need to
	  throw a hissy fit when these variables are encountered but rather
	  just filter them out. Review:
	  https://reviewboard.asterisk.org/r/3305 ........ Merged revisions
	  410187 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-07 21:11 +0000 [r410191]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/sorcery.c, /, include/asterisk/sorcery.h,
	  res/res_pjsip/pjsip_configuration.c: pjsip: allow and disallow
	  show same codecs In order to prevent confusion over the allow and
	  disallow list of codecs being the same an option for registering
	  a field as an alias is added. The alias field will be read from
	  the configuration file, but afterwards is not listed as a known
	  field. With disallow set as an alias, the CLI command pjsip show
	  endpoint # will list the allow= field, but not the disallow
	  field. (closes issue ASTERISK-23092) Review:
	  https://reviewboard.asterisk.org/r/3193/ ........ Merged
	  revisions 410190 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-07 20:41 +0000 [r410174-410185]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/devicestate.h, main/stasis_cache.c,
	  main/stasis_message.c, /, tests/test_devicestate.c,
	  include/asterisk/stasis.h, main/app.c, main/devicestate.c,
	  tests/test_stasis.c: stasis cache: Enhance to keep track of an
	  item from different entities. A stasis cache entry now contains
	  more than a single message/snapshot. It contains
	  messages/snapshots for the local entity as well as any remote
	  entities that post to the cached item. In addition callbacks can
	  be supplied when the cache is created to compute and post the
	  aggregate message/snapshot representing all entities stored in
	  the cache entry. * All stasis messages now have an eid to
	  indicate what entity posted it. * The stasis cache enhancements
	  allow device state to cache and aggregate the device states from
	  local and remote entities in a single operation. The cached
	  aggregate device state is available immediately after it is
	  posted to the stasis bus. This improves performance by
	  eliminating a cache dump and associated ao2 container traversals
	  to calculate the aggregate state. (closes issue ASTERISK-23204)
	  Reported by: Mark Michelson Review:
	  https://reviewboard.asterisk.org/r/3281/ ........ Merged
	  revisions 410184 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* tests/test_cel.c, channels/sig_pri.c, channels/sig_ss7.c,
	  include/asterisk/bridge.h, tests/test_cdr.c, channels/sig_pri.h,
	  channels/chan_dahdi.c, channels/sig_ss7.h, /: uniqueid: Fix
	  chan_dahdi, sig_pri, sig_ss7, test_cdr, and test_cel compiler
	  errors. (issue ASTERISK-23120) ........ Merged revisions 410171
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-07 15:47 +0000 [r410158]  Scott Griepentrog <sgriepentrog@digium.com>

	* tests/test_cdr.c, res/res_clioriginate.c, res/res_ari_bridges.c,
	  tests/test_substitution.c, res/res_stasis_playback.c,
	  channels/chan_multicast_rtp.c, apps/app_meetme.c, /,
	  main/bridge_basic.c, include/asterisk/channel_internal.h,
	  tests/test_app.c, apps/confbridge/conf_chan_record.c,
	  main/core_unreal.c, channels/chan_gtalk.c,
	  include/asterisk/stasis_app_playback.h,
	  res/ari/resource_bridges.c, channels/chan_jingle.c,
	  channels/chan_phone.c, pbx/pbx_spool.c,
	  res/ari/resource_bridges.h, res/parking/parking_tests.c,
	  channels/chan_motif.c, apps/app_confbridge.c,
	  res/ari/resource_channels.c, include/asterisk/pbx.h,
	  res/res_stasis.c, include/asterisk/bridge.h,
	  apps/app_voicemail.c, res/ari/resource_channels.h,
	  apps/app_dial.c, res/res_calendar_exchange.c,
	  channels/chan_vpb.cc, apps/app_page.c, apps/app_chanisavail.c,
	  include/asterisk/dial.h, main/core_local.c,
	  res/parking/parking_bridge_features.c,
	  tests/test_stasis_endpoints.c, res/parking/parking_bridge.c,
	  channels/chan_skinny.c, include/asterisk/stasis_app_snoop.h,
	  addons/chan_mobile.c, main/bridge_channel.c,
	  channels/chan_pjsip.c, channels/chan_mgcp.c,
	  channels/chan_unistim.c, main/pbx.c,
	  res/res_calendar_icalendar.c, main/ccss.c,
	  channels/chan_bridge_media.c, main/bridge.c,
	  tests/test_stasis_channels.c, apps/app_bridgewait.c,
	  apps/app_originate.c, res/res_calendar_caldav.c,
	  include/asterisk/channel.h, res/parking/parking_applications.c,
	  apps/app_followme.c, main/cel.c, apps/app_queue.c,
	  res/res_ari_channels.c, res/res_calendar_ews.c,
	  rest-api/api-docs/bridges.json, main/dial.c,
	  channels/chan_dahdi.c, channels/chan_h323.c, tests/test_cel.c,
	  rest-api/api-docs/channels.json,
	  include/asterisk/bridge_internal.h,
	  apps/confbridge/conf_chan_announce.c, res/res_calendar.c,
	  include/asterisk/core_unreal.h, addons/chan_ooh323.c,
	  res/stasis/control.c, channels/chan_sip.c,
	  main/channel_internal_api.c, include/asterisk/stasis_app.h,
	  res/res_stasis_snoop.c, channels/chan_console.c,
	  channels/chan_iax2.c, channels/chan_oss.c, apps/app_agent_pool.c,
	  main/channel.c, main/manager.c, channels/chan_misdn.c,
	  tests/test_voicemail_api.c, channels/chan_alsa.c,
	  channels/chan_nbs.c, main/message.c: uniqueid: channel linkedid,
	  ami, ari object creation with id's Much needed was a way to
	  assign id to objects on creation, and much change was necessary
	  to accomplish it. Channel uniqueids and linkedids are split into
	  separate string and creation time components without breaking
	  linkedid propgation. This allowed the uniqueid to be specified by
	  the user interface - and those values are now carried through to
	  channel creation, adding the assignedids value to every function
	  in the chain including the channel drivers. For local channels,
	  the second channel can be specified or left to default to a ;2
	  suffix of first. In ARI, bridge, playback, and snoop objects can
	  also be created with a specified uniqueid. Along the way, the
	  args order to allocating channels was fixed in chan_mgcp and
	  chan_gtalk, and linkedid is no longer lost as masquerade occurs.
	  (closes issue ASTERISK-23120) Review:
	  https://reviewboard.asterisk.org/r/3191/ ........ Merged
	  revisions 410157 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-07 05:04 +0000 [r410108]  Matthew Jordan <mjordan@digium.com>

	* /, channels/chan_sip.c: chan_sip: Allow static realtime members
	  to be qualified during module load. When a static realtime peer
	  with qualify=yes is loaded, Asterisk will fail to send an OPTIONS
	  request due to the lastms being equal to 0. This results in the
	  peer being unable to receive calls from Asterisk because the
	  status is permanently UNKNOWN. This patch allows an OPTIONS
	  request to be sent during module load by ignoring the lastms
	  value on startup only. Review:
	  https://reviewboard.asterisk.org/r/3294/ (closes issue
	  ASTERISK-17523) Reported by: Maciej Krajewski Tested by:
	  wushumasters patches: realtime_fix_11.7.0.txt uploaded by Trevor
	  Peirce (license 6112) ........ Merged revisions 410105 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 410106 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410107 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-06 23:47 +0000 [r410092]  Richard Mudgett <rmudgett@digium.com>

	* main/sorcery.c, /: sorcery.c: Fix off-nominal path ref and memory
	  leak in ast_sorcery_objectset_json_create(). * Made exit a loop
	  early on error in ast_sorcery_objectset_json_create(). * Removed
	  some dead code in ast_sorcery_objectset_create2(). ........
	  Merged revisions 410089 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-06 23:43 +0000 [r410091]  Russell Bryant <russell@russellbryant.com>

	* /, res/res_musiconhold.c: moh: fix a refcount error with realtime
	  MOH I observed a crash in res_musiconhold on an Asterisk 11
	  system using realtime MOH. Investigation of the backtrace showed
	  a corrupt mohclass, implying that it got destroyed before the
	  code expected it to. I went looking for reference counting errors
	  that could have caused this crash and this patch this result. It
	  contains 2 changes. 1) Remove a usless block of code that was
	  impossible to reach. There was even a comment indicating that it
	  was impossible to reach. The conditional includes
	  "!ast_test_flag(global_flags, MOH_CACHERTCLASSES)" and it's
	  inside of an if block with the opposite check
	  "ast_test_flag(global_flags, MOH_CACHERTCLASSES)". There's no
	  good reason to keep it around. 2) A similar block to #1 contained
	  a reference counting error. It stores state->class in the local
	  variable mohclass without increasing its reference count. The
	  reference count on mohclass is decremented at the end of the
	  function. This block of code probably very rarely runs, which
	  would help explain why this system was working fine for many
	  months before experiencing a crash. Review:
	  https://reviewboard.asterisk.org/r/3282/ ........ Merged
	  revisions 410043 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 410044 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 410090 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-06 22:39 +0000 [r410042]  George Joseph <george.joseph@fairview5.com>

	* res/res_pjsip/config_auth.c, funcs/func_sorcery.c (added),
	  res/res_pjsip/location.c, res/res_pjsip_outbound_registration.c,
	  main/bucket.c, res/res_pjsip_endpoint_identifier_ip.c,
	  include/asterisk/config.h, include/asterisk/sorcery.h,
	  res/res_pjsip/pjsip_configuration.c, res/res_pjsip_acl.c,
	  CHANGES, tests/test_sorcery.c, res/res_pjsip/config_transport.c,
	  main/config.c, main/sorcery.c: sorcery: Create AST_SORCERY
	  dialplan function. This patch creates the AST_SORCERY dialplan
	  function which allows someone to retrieve any value from a
	  sorcery-based config file. It's similar to AST_CONFIG. The
	  creation of the function itself was fairly straightforward but it
	  required changes to the underlying sorcery infrastructure that
	  rippled into individual sorcery objects. The changes stemmed from
	  inconsistencies in how sorcery created ast_variable objectsets
	  from sorcery objects and the inconsistency in how individual
	  objects used that feature especially when it came to parameters
	  that can be specified multiple times like contact in aor and
	  match in identify. You can read more here...
	  http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html
	  So, what this patch does, besides actually creating the
	  AST_SORCERY function, is the following... * Creates
	  ast_variable_list_append which is a helper to append one
	  ast_variable list to another. * Modifies the
	  ast_sorcery_object_field_register functions to accept the
	  already-defined sorcery_fields_handler callback. * Modifies
	  ast_sorcery_objectset_create to accept a parameter indicating
	  return type preference...a single ast_variable with all values
	  concatenated or an ast_variable list with multiple entries. Also
	  fixed a few bugs. * Modifies individual sorcery object
	  implementations to use the new function definition of the
	  ast_sorcery_object_field_register functions. * Modifies
	  location.c and res_pjsip_endpoint_identifier_ip.c to implement
	  sorcery_fields_handler handlers so they return multiple
	  occurrences as an ast_variable_list. * Added a whole bunch of
	  tests to test_sorcery. (closes issue ASTERISK-22537) Review:
	  http://reviewboard.asterisk.org/r/3254/

2014-03-06 19:04 +0000 [r410029]  Jonathan Rose <jrose@digium.com>

	* include/asterisk/acl.h, /, main/acl.c,
	  res/res_pjsip/pjsip_configuration.c, UPGRADE.txt,
	  contrib/ast-db-manage/config/versions/4c573e7135bd_fix_tos_field_types.py
	  (added), res/res_pjsip/config_transport.c: pjsip configuration:
	  Make transport TOS values consistent with endpoints Transport TOS
	  values were interpreted as DSCP values without being documented
	  as such. Endpoint TOS values (tos_audio/tos_video) behaved
	  normally as TOS values have historically. This patch makes the
	  transport TOS values behave as TOS values and makes all TOS
	  values readable as string values (e.g. AF11). In addition,
	  alembic scripts have been updated to use the proper field types
	  for all TOS/COS values. (issue ASTERISK-23235) Reported by:
	  George Joseph Review: https://reviewboard.asterisk.org/r/3304/
	  ........ Merged revisions 410028 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-06 18:20 +0000 [r410027]  Joshua Colp <jcolp@digium.com>

	* res/ari/resource_channels.c, CHANGES,
	  res/ari/ari_model_validators.c,
	  rest-api/api-docs/recordings.json, res/ari/resource_bridges.c,
	  res/ari/ari_model_validators.h, /,
	  include/asterisk/stasis_app_recording.h,
	  res/res_stasis_recording.c: res_stasis_recording: Add a
	  "target_uri" field to recording events. This change adds a
	  target_uri field to the live recording object. It contains the
	  URI of what is being recorded. (closes issue ASTERISK-23258)
	  Reported by: Ben Merrills Review:
	  https://reviewboard.asterisk.org/r/3299/ ........ Merged
	  revisions 410025 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-06 15:58 +0000 [r410012]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_mwi.c, /: Don't attempt to link in an aggregate MWI
	  subscription if an endpoint does not aggregate MWI. Attempting to
	  link a NULL object into an ao2 container had been benign
	  previously, but since enabling DO_CRASH in the testsuite, this is
	  now causing a crash. It's better to be right here anyway.
	  ........ Merged revisions 410011 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-06 02:22 +0000 [r409996]  Matthew Jordan <mjordan@digium.com>

	* res/res_fax_spandsp.c, /: res_fax_spandsp: Fix crash when passing
	  ulaw/alaw data to spandsp When acting as a T.38 fax gateway,
	  res_fax_spandsp would at times cause a crash in libspandsp. This
	  would occur when, during fax tone detection, a ulaw/alaw frame
	  would be passed to modem_connect_tones_rx. That particular
	  routine expects the data to be in slin format. This patch looks
	  at the frame type and, if the data is ulaw/alaw, converts the
	  format to slin before passing it to modem_connect_tones_rx.
	  Review: https://reviewboard.asterisk.org/r/3296 (closes issue
	  ASTERISK-20149) Reported by: Alexandr Gordeev Tested by: Michal
	  Rybarik patches: spandsp_g711decode.diff uploaded by Michal
	  Rybarik (license 6578) ........ Merged revisions 409990 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409991 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-06 00:33 +0000 [r409970-409977]  Richard Mudgett <rmudgett@digium.com>

	* apps/confbridge/conf_state_multi.c,
	  apps/confbridge/conf_state_inactive.c, /: app_confbridge: Remove
	  some noop code. ........ Merged revisions 409976 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_musiconhold.c: res_musiconhold.c: Remove some
	  unnecessary RAII_VAR() usage. * Made the moh_register() define
	  use useful parameter names. ........ Merged revisions 409967 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-05 20:41 +0000 [r409904-409919]  Kinsey Moore <kmoore@digium.com>

	* main/config.c, /: config: Fix inverted test The test of the
	  result of the stat() call was inverted such that its output was
	  only used if the call failed. This inverts the test so that the
	  output of stat() is used correctly. This was causing full reloads
	  on unchanged files. (closes issue ASTERISK-23383) Reported by:
	  David Woolley ........ Merged revisions 409916 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409917 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409918 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* bridges/bridge_native_rtp.c, /: bridge_native_rtp: Fix crash
	  involving masquerade It is possible for a channel to be
	  masqueraded out of a bridge which means it may no longer have RTP
	  glue to check upon leaving said bridge. If this situation
	  occurred (it's possible at least during dial and call pickup)
	  then Asterisk would crash. This change makes sure the glue is
	  checked before use. (closes issue AST-1290) Reported by: John
	  Bigelow ........ Merged revisions 409900 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-05 18:51 +0000 [r409889]  Richard Mudgett <rmudgett@digium.com>

	* contrib/ast-db-manage/cdr/versions,
	  contrib/ast-db-manage/cdr/versions/210693f3123d_create_cdr_table.py,
	  /,
	  contrib/ast-db-manage/config/versions/28887f25a46f_create_queue_tables.py
	  (added), contrib/ast-db-manage/cdr.ini.sample (added),
	  contrib/ast-db-manage/cdr/env.py, contrib/ast-db-manage/cdr
	  (added), contrib/ast-db-manage/cdr/script.py.mako: alembic: Add
	  missing queue and CDR table creation scripts. * Added the queues
	  and queue_members tables to the config alembic scripts. * Added
	  the CDR table alembic creation script. The CDR table is more of
	  an example for new setups since the actual table can be fully
	  customized in cdr_adaptive_odbc.conf. (closes issue
	  ASTERISK-23233) Reported by: jmls Review:
	  https://reviewboard.asterisk.org/r/3227/ ........ Merged
	  revisions 409885 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-05 18:47 +0000 [r409888]  Mark Michelson <mmichelson@digium.com>

	* funcs/func_presencestate.c, /: Fix documentation for
	  PRESENCE_STATE to properly illustrate how to create a presence
	  hint. There was a missing comma. This was discovered by Dan
	  Kaplan. ........ Merged revisions 409886 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409887 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-05 16:58 +0000 [r409836]  David M. Lee <dlee@digium.com>

	* main/config.c, /, configure, include/asterisk/autoconfig.h.in,
	  configure.ac: Corrected cross-platform stat nanosecond code When
	  nanosecond time resolution was added for identifying config file
	  changes, it didn't cover all of the myriad of ways that one might
	  obtain nanosecond time resolution off of struct stat. Rather than
	  complicate the #if even further figuring out one system from the
	  next, this patch directly tests for the three struct members I
	  know about today, and #ifdef's accordingly. Review:
	  https://reviewboard.asterisk.org/r/3273/ ........ Merged
	  revisions 409833 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409834 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409835 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-05 16:26 +0000 [r409831-409832]  Moises Silva <moises.silva@gmail.com>

	* res/res_http_websocket.c: Fix res/res_http_websocket.c build
	  failure in 32bit due to incorrect print format for uint64_t

	* res/res_http_websocket.c, /: Fix WebRTC over WSS not working
	  Several fixes for the WebSockets implementation in
	  res/res_http_websocket.c * Flush the websocket session FILE* as
	  fwrite() may not actually guarantee sending the data to the
	  network. If we do not flush, it seems that buffering on the SSL
	  socket for outbound messages causes issues * Refactored
	  ast_websocket_read to take into account that SSL file descriptors
	  may be ready to read via fread() but poll() will not actually say
	  so because the data was already read from the network buffers and
	  is now in the libc buffers (closes issue ASTERISK-23099) (closes
	  issue ASTERISK-21930) Review:
	  https://reviewboard.asterisk.org/r/3248/ ........ Merged
	  revisions 409681 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409697 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-05 12:06 +0000 [r409780]  Sean Bright <sean@malleable.com>

	* contrib/scripts/astgenkey, contrib/scripts/astgenkey.8, /: Fix
	  references to 'keys' CLI commands in astgenkey ........ Merged
	  revisions 409777 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409778 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409779 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-05 06:17 +0000 [r409747]  Igor Goncharovskiy <igor.goncharovsky@gmail.com>

	* channels/chan_unistim.c: Add update_peer function to
	  unistim_rtp_glue, improve other unistim_rtp_glue functions
	  conforming to other channel drivers. Do not forget auto-detected
	  and user-selected phone settings on 'unistim reload' ........
	  Merged revisions 409705 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409745 from
	  http://svn.asterisk.org/svn/asterisk/branches/11

2014-03-05 01:05 +0000 [r409683]  Richard Mudgett <rmudgett@digium.com>

	* /, include/asterisk/stasis_internal.h: stasis: Made
	  internal_stasis_subscribe() prototype and definition match
	  exactly. ........ Merged revisions 409682 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-04 19:34 +0000 [r409627]  Michael L. Young <elgueromexicano@gmail.com>

	* funcs/func_audiohookinherit.c, /: func_audiohookinheritance:
	  Check If A Channel Was Specified This patch prevents a crash when
	  using the function audiohookinheritance without setting the
	  channel. (closes issue ASTERISK-23104) Reported by: Joel Vandal
	  Tested by: Joel Vandal Patches:
	  asterisk-23104_audiohook_inherit_no_channel-11.diff uploaded by
	  Michael L. Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/3272/ ........ Merged
	  revisions 409623 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409625 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409626 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-04 17:22 +0000 [r409587]  Jonathan Rose <jrose@digium.com>

	* /, res/res_rtp_asterisk.c: res_rtp_asterisk: Fix one way audio
	  problems with hold/unhold when using ICE ICE sessions will now be
	  restarted if sessions are changed to use new sets of remote
	  candidates. (closes issue ASTERISK-22911) Reported by: Vytis
	  Valentinavičius Review: https://reviewboard.asterisk.org/r/3275/
	  ........ Merged revisions 409565 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409570 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-04 16:55 +0000 [r409569]  Kinsey Moore <kmoore@digium.com>

	* /, main/astobj2.c: AO2: Add an assert for bad objects This adds
	  an assert that will only be active if Asterisk is compiled with
	  DO_CRASH and allows the testsuite to fail tests that would
	  otherwise require log file parsing. ........ Merged revisions
	  409566 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 409567 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409568 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-04 14:55 +0000 [r409475]  Sean Bright <sean@malleable.com>

	* /, channels/chan_sip.c: Minor whitespace change to 'sip show
	  peers' output. (closes issue ASTERISK-23406) Reported by: ibercom
	  Tested by: ibercom Patches: asterisk-11.patch uploaded by ibercom
	  ........ Merged revisions 409472 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409473 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409474 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-03 19:44 +0000 [r409423]  Joshua Colp <jcolp@digium.com>

	* /, res/res_stasis_recording.c: res_stasis_recording: Fix memory
	  leak of the absolute name. ........ Merged revisions 409422 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-03 02:08 +0000 [r409364]  Matthew Jordan <mjordan@digium.com>

	* main/asterisk.c, /: doxygen: Tweak the link back to ye olde
	  Digium website ........ Merged revisions 409361 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409362 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409363 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-02 17:03 +0000 [r409350]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, Makefile.rules: Makefile: replace -O6 with -O3 -O6 is not a
	  legal option of gcc. Unofficially gcc considers it to be
	  equivalent of -O3. clang chalks on it, though. This commit sets
	  the default optimization flag to be -O3, like gcc actually
	  considered it. Review: https://reviewboard.asterisk.org/r/3280/
	  ........ Merged revisions 409308 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409344 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409346 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-01 20:28 +0000 [r409288]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_session.c, /: res_pjsip_session: Set options
	  (100rel, timers) on incoming sessions. This change passes options
	  to the UAS creation function. This in turn sets up 100rel and
	  session timer properties on the incoming session. Reported by
	  Julian Russell on asterisk-users mailing list. ........ Merged
	  revisions 409287 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-03-01 00:05 +0000 [r409257-409275]  Richard Mudgett <rmudgett@digium.com>

	* /, main/devicestate.c: devicestate.c: Simplified some logic in
	  _ast_device_state(). ........ Merged revisions 409274 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis_cache.c, /: stasis_cache.c: Remove some unnecessary
	  RAII_VAR() usage. ........ Merged revisions 409272 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis.c, /: stasis.c: Misc code cleanups. * Remove some
	  unnecessary RAII_VAR() usage. * Made the struct
	  stasis_subscription ao2 object use the ao2 lock instead of a
	  redundant join_lock in the struct for ast_cond_wait(). * Removed
	  locks on some ao2 objects that don't need the lock. * Made the
	  topic pool entries container use the ao2 template functions. *
	  Add some missing allocation failure checks. * Add missing cleanup
	  in off nominal path of dispatch_message(). ........ Merged
	  revisions 409270 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c: chan_sip: Add precautionary p->owner
	  checks. * Add precautionary p->owner checks in sip_hangup(),
	  get_refer_info(), get_also_info(), and
	  interpret_t38_parameters(). * Simplify some tangled logic in
	  get_refer_info(), get_also_info(), and add_rpid(). * Removed some
	  dead code in handle_request_invite(). (closes issue
	  ASTERISK-23323) Reported by: Walter Doekes Patches:
	  issueA23323-more_p_owner_checks-1.8.x.patch (license #5674)
	  uploaded by wdoekes (modified)
	  issueA23323-more_p_owner_checks-11.x.patch (license #5674)
	  uploaded by wdoekes (modified)
	  issueA23323-more_p_owner_checks-12.x.patch (license #5674)
	  uploaded by wdoekes (modified)
	  issueA23323-more_p_owner_checks-trunk.patch (license #5674)
	  uploaded by wdoekes (modified) ........ Merged revisions 409207
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 409255 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409256 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-28 21:24 +0000 [r409237]  Kinsey Moore <kmoore@digium.com>

	* apps/app_queue.c, /: app_queue: Fix documented AMI event name
	  During the rewrite of AMI events to use the Stasis bus, the name
	  of the QueueMemberPaused event was changed to QueueMemberPause.
	  This corrects documentation to reflect that. ........ Merged
	  revisions 409234 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-28 18:03 +0000 [r409159]  Richard Mudgett <rmudgett@digium.com>

	* /, channels/chan_sip.c: chan_sip: Fix crash in
	  ast_channel_hangupcause_set(). * Fix crash in
	  ast_channel_hangupcause_set() because p->owner not checked before
	  calling. Regression introduced by the fix for ASTERISK-22621.
	  (closes issue ASTERISK-23135) Reported by: OK (issue
	  ASTERISK-23323) Reported by: Walter Doekes ........ Merged
	  revisions 409156 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409157 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409158 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-27 19:54 +0000 [r409132]  Jonathan Rose <jrose@digium.com>

	* res/res_rtp_asterisk.c, /: Multiple revisions 409129-409130
	  ........ r409129 | jrose | 2014-02-27 13:19:02 -0600 (Thu, 27 Feb
	  2014) | 15 lines res_rtp_asterisk: Fix checklist creating
	  problems in ICE sessions Prior to this patch, local candidate
	  lists including SRFLX would fail to start properly when building
	  ICE candidate check lists. This patch fixes that problem by
	  making sure that each SRFLX candidate is associated with the
	  proper base address so that the check list can create matches
	  properly. This patch was written by jcolp. The issue will be left
	  open to await testing by the issue participants. (issue
	  ASTERISK-23213) Reported by: Andrea Suisani Review:
	  https://reviewboard.asterisk.org/r/3256/ ........ r409130 | jrose
	  | 2014-02-27 13:38:10 -0600 (Thu, 27 Feb 2014) | 8 lines
	  res_rtp_asterisk: correct build error from r409129 Accidentally
	  placed a declaration below functional code (issue ASTERISK-23213)
	  Reported by: Andrea Suisani Review:
	  https://reviewboard.asterisk.org/r/3256/ ........ Merged
	  revisions 409129-409130 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409131 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-27 16:26 +0000 [r409091]  David M. Lee <dlee@digium.com>

	* utils/astman.c, /: Fix memory stomping bug in astman. This memset
	  complained in dev mod on my Ubuntu box. The memset is both
	  unnecessary and dangerous. At this point, m hasn't been
	  initialized yet, so the memset will write off to whatever address
	  happens to be on the stack at the time. ........ Merged revisions
	  409077 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 409083 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409087 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-27 16:08 +0000 [r409055]  Corey Farrell <git@cfware.com>

	* /, configs/res_fax.conf.sample: res_fax: Comment out default
	  settings from res_fax.conf. Comment out many settings in
	  res_fax.conf.sample. The defaults are set in res_fax.c, so
	  setting the same value in sample config does nothing but make the
	  sample config more fragile. (closes issue ASTERISK-23231)
	  Reported by: David Brillert Review:
	  https://reviewboard.asterisk.org/r/3261/ ........ Merged
	  revisions 409052 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 409053 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 409054 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-27 12:29 +0000 [r409000]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_pjsip_sdp_rtp.c: res_pjsip_sdp_rtp: Apply
	  packetization rules on inbound SDP handling The setting
	  'use_ptime' is supposed to tell Asterisk to honour the ptime
	  attribute in an offer, preferring it to whatever packetization
	  preferences have been set internally. Currently, however,
	  something rather quirky will happen: (1) The SDP answer will be
	  constructed in create_outgoing_sdp_stream. This will use the
	  preferences from the endpoint, such that the 200 OK response will
	  add the packetization preferences from the endpoint, and not what
	  was offered. (2) When the 200 response is issued,
	  apply_negotiated_sdp_stream is called. This will call
	  apply_packetization, which will use the ptime attribute from the
	  offer internally. We end up telling the offerer to use the
	  internal ptime attribute, but we end up using the offered ptime
	  attribute. Hilarity ensues. This patch modifies the behaviour by
	  calling apply_packetization from negotiate_incoming_sdp_stream,
	  which is called prior to create_outgoing_sdp_stream. This causes
	  the format preferences on the session's media object to be set to
	  the inbound ptime value (if 'use_ptime' is enabled), such that
	  the construction of the answer gets the right value immediately.
	  Review: https://reviewboard.asterisk.org/r/3244/ ........ Merged
	  revisions 408999 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-26 23:35 +0000 [r408984]  Richard Mudgett <rmudgett@digium.com>

	* /, tests/test_stasis.c: test_stasis.c: Misc cleanups. * Make the
	  consumer ao2 object use the ao2 lock instead of a redundant lock
	  in the struct for ast_cond_wait(). * Fixed some curly brace
	  placements. * Fixed use of malloc(0). malloc(0) has variant
	  behavior. It is up to the implementation to determine if it
	  returns NULL or a valid pointer that can be later passed to
	  free(). ........ Merged revisions 408983 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-26 19:00 +0000 [r408971]  Scott Griepentrog <sgriepentrog@digium.com>

	* channels/chan_pjsip.c, /: pjsip: avoid edge case potential crash
	  in answer() When accidentally compiling against a wrong version
	  of pjsip headers with a different pjsip_inv_session size, the
	  invite_tsx structure could be null in the answer() function. This
	  led to a crash because it attempted to send the session response
	  with an uninitialized packet pointer. This patch presets packet
	  to null and adds a diagnostic log message to explain why the call
	  fails. Review: https://reviewboard.asterisk.org/r/3267/ ........
	  Merged revisions 408970 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-26 17:04 +0000 [r408958]  Joshua Colp <jcolp@digium.com>

	* res/res_ari.c, /: res_ari: Make some additional error responses
	  consistent with the rest of the system. This change makes some
	  error cases use ast_ari_response_error to construct their error
	  responses instead of manually doing it. This ensures they are
	  consistent with the other error responses. Based on the original
	  patch as done by Paul Belanger on the associated review. Review:
	  https://reviewboard.asterisk.org/r/2904/ ........ Merged
	  revisions 408957 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-26 13:47 +0000 [r408942-408944]  Kinsey Moore <kmoore@digium.com>

	* include/asterisk/res_pjsip_session.h, /: PJSIP: Fix some bad
	  spacing ........ Merged revisions 408943 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_refer.c: PJSIP: Prevent crash if channel has
	  gone away It is currently possible for an ast_sip_session to
	  exist without an associated channel as is the case when a new
	  invite is coming in or just after a hangup is issued on a
	  chan_pjsip channel. Part of the attended transfer code assumed
	  the channel would be non-NULL and used it as such causing a
	  crash. This bug was exposed thanks to the attended transfer ARI
	  test in the test suite. (closes issue ASTERISK-23287) Reported
	  by: Matt Jordan ........ Merged revisions 408941 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-26 08:57 +0000 [r408932]  Igor Goncharovskiy <igor.goncharovsky@gmail.com>

	* channels/chan_unistim.c: Implement functions handling keypress,
	  display icons and text for i2004 KEM support.

2014-02-25 17:51 +0000 [r408881-408883]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_exten_state.c, /,
	  res/res_pjsip_pidf_digium_body_supplement.c (added),
	  include/asterisk/res_pjsip_body_generator_types.h:
	  res_pjsip_exten_state: Presence for digium phones Added presence
	  support for digium phones. Review:
	  https://reviewboard.asterisk.org/r/3239/ ........ Merged
	  revisions 408882 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_send_to_voicemail.c (added),
	  res/res_pjsip_header_funcs.c: res_pjsip_send_to_voicemail:
	  transferring to voicemail for digium phones Added the ability for
	  transferring directly to voicemail on digium phones. Added a new
	  module that checks for the presence of a custom header and/or
	  diversion header within a sip REFER. If either is found and they
	  specify a sending to voicemail action then variables are added to
	  the channel allowing the user access to them in the dialplan.
	  Dialplan can then be written that branches based upon these
	  values allowing, for instace, for a single number to be used for
	  dialing and/or accessing voicemail directly. Also fixed a problem
	  where the PJSIP_HEADER function was allowing non pjsip channels
	  through (checked to make sure it has the correct channel type
	  before proceeding). Review:
	  https://reviewboard.asterisk.org/r/3245/ ........ Merged
	  revisions 408880 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-25 17:44 +0000 [r408879]  Rusty Newton <rnewton@digium.com>

	* configs/voicemail.conf.sample, /: configs/voicemail.conf.sample -
	  Make mailcmd sample text more explicit Made the wording a bit
	  more explicit. Didn't really change the meaning. ........ Merged
	  revisions 408876 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408877 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408878 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-22 23:31 +0000 [r408859]  Matthew Jordan <mjordan@digium.com>

	* /, main/asterisk.c: main: Initialize dialplan providing core
	  components prior to module pre-load It is possible to pre-load
	  pbx_config. As a result, pbx_config - which will load and parse
	  the dialplan - will attempt to use various dialplan components,
	  such as device state providers and presence state providers,
	  prior to them being initialized by the core. This would lead to a
	  crash, as the components had not created their Stasis cache
	  entries. This patch moves a number of core component
	  initializations before the module pre-load. This guarantees that
	  if someone does pre-load pbx_config - or other pbx modules - that
	  the Stasis caches for the various core components are created.
	  (closes issue ASTERISK-23320) Reported by: xrobau (closes issue
	  ASTERISK-23265) Reported by: Andrew Nagy Tested by: Andrew Nagy,
	  Rusty Newton ........ Merged revisions 408855 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-22 18:01 +0000 [r408840]  Alexandr Anikin <may@telecom-service.ru>

	* addons/chan_ooh323.c, /: ignore AST_CONTROL_PVT_CAUSE_CODE
	  without any messages (closes issue ASTERISK-23336) Reported by:
	  Alexander Semych ........ Merged revisions 408838 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408839 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-22 02:31 +0000 [r408788]  Corey Farrell <git@cfware.com>

	* /, utils/extconf.c, utils/conf2ael.c, res/ael/pval.c, main/pbx.c:
	  Remove extra defines of AST_PBX_MAX_STACK. * Ensure
	  AST_PBX_MAX_STACK is only defined in extconf.h and pbx.h. * Fix
	  incorrect function parameters in utils/extconf.c. (closes issue
	  ASTERISK-23141) Reported by: Maxim Review:
	  https://reviewboard.asterisk.org/r/3241/ ........ Merged
	  revisions 408785 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408786 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408787 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-21 18:37 +0000 [r408731]  Kevin Harwell <kharwell@digium.com>

	* main/rtp_engine.c, /: rtp_engine: Dynamic payload change in rtp
	  mapping not supported Asterisk didn't support the dynamic payload
	  change in rtp mapping in the 200 OK response. Scenario: Asterisk
	  sends the INVITE proposing alaw and telephone-event, it proposes
	  rtpmap:101 for telephone-event. Peer responds with 2xx, it
	  answers with alaw and telephone-event also, but it proposes a
	  different rtpmap number (rtpmap:103) for telephone-event.
	  Expected Behaviour: Asterisk should honour the rtpmapping in the
	  response and send DTMF packets using 103 as payload type for
	  DTMF. Actual Behaviour: Asterisk sends DTMF packets using payload
	  type 101. With this patch asterisk now supports changes that can
	  occur in the rtp mapping in the response. (closes issue
	  ASTERISK-23279) Reported by: NITESH BANSAL Review:
	  https://reviewboard.asterisk.org/r/3225/ Patches:
	  dynamic_payload_change.patch uploaded by nbansal (license 6418)
	  ........ Merged revisions 408729 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408730 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-21 18:19 +0000 [r408712-408723]  Richard Mudgett <rmudgett@digium.com>

	* main/manager.c, /: manager: Fix AMI Status action of a single
	  channel. Fixed use of uninitialized ao2 container iterator in an
	  off-nominal condition. Either a memory allocation error or the
	  requested channel is an internal channel not exposed to the
	  outside. ........ Merged revisions 408715 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/sorcery.c, res/ari/resource_endpoints.c, /,
	  apps/app_meetme.c, res/res_fax.c, res/res_stasis_recording.c,
	  main/stasis_channels.c, res/res_sorcery_astdb.c,
	  include/asterisk/json.h: json: Fix off-nominal json ref counting
	  issues. * Fixed off-nominal json ref counting issue with using
	  the following API calls: ast_json_object_set() and
	  ast_json_array_append(). * Fixed off-nominal error reporting in
	  ast_ari_endpoints_list(). * Fixed some miscellaneous off-nominal
	  json ref counting issues in report_receive_fax_status() and
	  dial_to_json(). ........ Merged revisions 408713 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/json.c, /: json: Fix json API wrapper code for json library
	  versions earlier than 2.3.0. * Fixed json ref counting issue with
	  json API wrapper code for ast_json_object_update_existing() and
	  ast_json_object_update_missing() when the json library is earlier
	  than version 2.3.0. ........ Merged revisions 408711 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-21 16:49 +0000 [r408699]  Corey Farrell <git@cfware.com>

	* channels/chan_sip.c: chan_sip: prevent add_route from adding
	  empty header. Fix regression caused by ASTERISK-22582. Empty
	  Route headers were added when the route had a single strict hop.
	  (closes issue ASTERISK-23306) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3236/

2014-02-21 16:27 +0000 [r408645-408652]  Kevin Harwell <kharwell@digium.com>

	* main/rtp_engine.c, /: rtp_engine: Output mixup in
	  ${CHANNEL(rtpqos,audio,all)} Fixed the output of
	  CHANNEL(rtpqos,audio,all) to use txjitter instead of rxjitter.
	  (closes issue ASTERISK-23261) Reported by: rsw686 Patches:
	  rtpqos.patch uploaded by rsw686 (license 5887) ........ Merged
	  revisions 408646 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408647 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408649 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/channel.c, /: channel.c: MOH is not working for transferee
	  after attended transfer Updated the code to check to see if MOH
	  is playing on the transferor and if so then start it on the
	  channel that replaces it during a masquerade. Example scenario of
	  the problem: Alice calls Bob and then Bob begins the attended
	  transfer process into a queue. Upon going on hold Alice hears
	  music and so does Bob once he is in the queue. Bob then transfers
	  Alice into the queue and then music for Alice stops even though
	  she should be hearing it since has now replaced Bob in the queue.
	  The problem that was occurring is that once the channel was
	  masqueraded the app (queues, confbridge, etc...) had no way of
	  knowing that the channel had just been swapped out thus it did
	  not start music for the present channel. Credit to Olle Johansson
	  for pointing me in the right direction on this issue. (closes
	  issue ASTERISK-19499) Reported by: Timo Teräs Review:
	  https://reviewboard.asterisk.org/r/3226/ ........ Merged
	  revisions 408642 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408643 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408644 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-21 10:45 +0000 [r408592]  Alexandr Anikin <may@telecom-service.ru>

	* /, addons/ooh323c/src/ooCalls.h: Fix type of roundTripDelay
	  variables ........ Merged revisions 408589 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408590 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408591 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-21 00:50 +0000 [r408539]  Michael L. Young <elgueromexicano@gmail.com>

	* /, apps/app_chanspy.c: app_chanspy: Documentation Update To
	  Clarify "x" Option When using the "x" option (specify a DTMF
	  digit to exit the application), it is not obvious in the
	  documentation that this only works when spying on a channel. If a
	  channel being used to spy on other channels is waiting to connect
	  to a channel or is no longer attached to a channel, the DTMF is
	  ignored. As noted on the issue tracker, since there are
	  workarounds available and this is a rarely used option we are
	  opting for a documentation change here. (closes issue
	  ASTERISK-22661) Reported by: Chris Hillman Patches:
	  asterisk-22661-doc-clarify-chan_spy.diff uploaded by Michael L.
	  Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/2990/ ........ Merged
	  revisions 408536 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408537 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408538 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-20 21:12 +0000 [r408519-408523]  George Joseph <george.joseph@fairview5.com>

	* /, res/res_pjsip/location.c,
	  res/res_pjsip_outbound_registration.c: pjsip_cli: Add pjsip
	  commands 'show registrations' and 'show contacts'. Added 'show
	  registrations' and 'show contacts' to pjsip cli to make things a
	  little more consistent. The output is exactly the same as the
	  list command. Just needed to add entries to their respective
	  ast_cli_entry structures. (closes issue ASTERISK-23275) Review:
	  http://reviewboard.asterisk.org/r/3210/ ........ Merged revisions
	  408522 from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip/pjsip_cli.c, main/config.c: pjsip_cli: Fix
	  memory leak in ast_sip_cli_print_sorcery_objectset. Fixed memory
	  leaks in ast_sip_cli_print_sorcery_objectset and
	  ast_variable_list_sort. (closes issue ASTERISK-23266) Review:
	  http://reviewboard.asterisk.org/r/3200/ ........ Merged revisions
	  408520 from http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/sorcery.h,
	  res/res_pjsip/include/res_pjsip_private.h, res/res_pjsip.c,
	  tests/test_sorcery.c, main/sorcery.c, /,
	  res/res_pjsip/config_system.c: sorcery: Create sorcery instance
	  registry. In order to retrieve an arbitrary sorcery instance from
	  a dialplan function (or any place else) there needs to be a
	  registry of sorcery instances. ast_sorcery_init now creates a
	  hashtab as a registry. ast_sorcery_open now checks the hashtab
	  for an existing sorcery instance matching the caller's module
	  name. If it finds one, it bumps the refcount and returns it. If
	  not, it creates a new sorcery instance, adds it to the hashtab,
	  then returns it. ast_sorcery_retrieve_by_module_name is a new
	  function that does a hashtab lookup by module name. It can be
	  called by the future dialplan function. res_pjsip/config_system
	  needed a small change to share the main res_pjsip sorcery
	  instance. tests/test_sorcery was updated to include a test for
	  the registry. (closes issue ASTERISK-22537) Review:
	  http://reviewboard.asterisk.org/r/3184/ ........ Merged revisions
	  408518 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-20 19:02 +0000 [r408503]  Matthew Jordan <mjordan@digium.com>

	* res/res_pjsip.c, /: res_pjsip: Update documentation for
	  'use_avpf' option When 'use_avpf' is set to True, inbound offers
	  must use the AVPF/SAVPF RTP profile. However, when 'use_avpf' is
	  set to False, Asterisk will accept both AVP/SAVP or AVPF/SAVPF
	  RTP profiles in inbound offers. The documentation previously
	  implied that Asterisk would reject AVPF/SAVPF if 'use_avpf' was
	  set to False and a UA offered said profile in an INVITE request.
	  ........ Merged revisions 408502 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-20 02:44 +0000 [r408450]  Rusty Newton <rnewton@digium.com>

	* /, apps/app_queue.c: apps/app_queue - Fix incorrect Macro
	  parameter documentation Macro is executed on the called channel,
	  not the calling channel. (closes issue ASTERISK-23069) Reported
	  By: Bryan Anderson ........ Merged revisions 408447 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408448 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408449 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-19 19:09 +0000 [r408386-408390]  Richard Mudgett <rmudgett@digium.com>

	* /, main/config.c: config: Add file size and nanosecond resolution
	  fields to the cached modified config file information. Repeatedly
	  modifying config files and reloading too fast sometimes fails to
	  reload the configuration because the cached modification
	  timestamp has one second resolution. * Added file size and
	  nanosecond resolution fields to the cached config file
	  modification timestamp information. Now if the file size changes
	  or the file system supports nanosecond resolution the modified
	  file has a better chance of being detected for reload. * Added a
	  missing unlock in an off-nominal code path. (closes issue
	  AST-1303) Review: https://reviewboard.asterisk.org/r/3235/
	  ........ Merged revisions 408387 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408388 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408389 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_sorcery_astdb.c: res_sorcery_astdb.c: Fix regex
	  handling and keep simple prefix matching performance. The sorcery
	  astDB wizzard does not handle regex correctly if the pattern
	  begins with an anchor character. This patch attempts to convert
	  the anchored regex pattern to a prefix pattern supported by astDB
	  for performance reasons. If it is not able to convert the pattern
	  it falls back to getting all astDB members of the family and
	  doing a normal regex pattern matching on the retrieved records.
	  Review: https://reviewboard.asterisk.org/r/3161/ ........ Merged
	  revisions 408385 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-19 12:04 +0000 [r408315-408332]  Alexandr Anikin <may@telecom-service.ru>

	* addons/ooh323c/src/ooCapability.c, /,
	  addons/ooh323c/src/ooh245.c: process receiveAndTransmit user
	  input remote caps instead of receive only send receiveAndTransmit
	  user input our caps instead of receive only ........ Merged
	  revisions 408328 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408330 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408331 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* addons/ooh323c/src/ooh323.c, /: Allow different socket and
	  signalling ip on h.323 connection if gk mode is active Reported
	  by: Gabriele Odone Patches: ASTERISK-22738-1.patch Tested by:
	  Gabriele Odone (closes issue ASTERISK-22738) ........ Merged
	  revisions 408312 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408314 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-18 19:19 +0000 [r408299]  Richard Mudgett <rmudgett@digium.com>

	* contrib/ast-db-manage/config/env.py,
	  contrib/ast-db-manage/config/versions/4da0c5f79a9c_create_tables.py,
	  contrib/ast-db-manage/config,
	  contrib/ast-db-manage/voicemail/env.py,
	  contrib/ast-db-manage/voicemail,
	  contrib/ast-db-manage/config/versions/581a4264e537_adding_extensions.py,
	  contrib/ast-db-manage/config/versions,
	  contrib/ast-db-manage/config/versions/21e526ad3040_add_pjsip_debug_option.py,
	  contrib/ast-db-manage/voicemail/versions/a2e9769475e_create_tables.py,
	  contrib/ast-db-manage/voicemail/versions, contrib/ast-db-manage,
	  /: alembic: Add svn:ignore *.pyc to directories and
	  svn:executable to *.py files. ........ Merged revisions 408297
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-17 15:36 +0000 [r408272]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip/location.c, UPGRADE.txt, res/res_pjsip.c,
	  res/res_pjsip_registrar.c, include/asterisk/res_pjsip.h: Store
	  SIP User-Agent information in contacts. When an endpoint sends a
	  REGISTER request to Asterisk, we now will associate the
	  User-Agent header with all contacts that were bound in that
	  REGISTER request. ........ Merged revisions 408270 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-16 03:25 +0000 [r408199-408227]  Matthew Jordan <mjordan@digium.com>

	* /, main/pbx.c: pbx: Handle a completely empty dialplan during a
	  context merge It is highly unlikely, but - at least in Asterisk
	  12 - theoretically possible to load Asterisk with no dialplan
	  whatsoever. If that occurs, and some other module (that is not a
	  pbx module) attempts to merge its contexts into the dialplan, the
	  existing merge routine will crash. This is because it is not
	  insane, and rightly believes that you provided some sort of
	  dialplan, somewhere. This patch will gracefully merge the
	  contexts in such a case. Note that this is highly unlikely to
	  occur in 1.8/11, as features will most likely provide some
	  dialplan via parking. However, in Asterisk 12, parking is now
	  provided by res_parking, and hence may create its dialplan later.
	  (closes issue ASTERISK-23297) Reported by: CJ Oster Review:
	  https://reviewboard.asterisk.org/r/3222 ........ Merged revisions
	  408200 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 408201 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408220 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, Makefile: buildsystem: Unbreak the build (infloop) on Asterisk
	  11+ Apparently r408084 ( https://reviewboard.asterisk.org/r/3212/
	  ) broke the build. This patch fixes it by ignoring the .lastclean
	  dependencies if the MENUSELECT_EMBED variable is not defined.
	  patches: tmp.diff uploaded by wdoekes (License 5674) Review:
	  https://reviewboard.asterisk.org/r/3228/ ........ Merged
	  revisions 408193 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408194 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-14 21:44 +0000 [r408139-408141]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/stasis_endpoints.c, /: ARI: correct upper/lower case URI
	  discrepancies URI's are supposed to be case sensitive and all
	  lower case. In practice some portions of URI's in ARI are case
	  insensitive and others are not, such as TECH, which in one
	  instance would match a lower case name and in another would not.
	  In this patch, the ast_endpoint_lastest_snapshot() function is
	  modified to change the TECH portion to full upper case before
	  lookup. This resolves the discrepancy noted by the reporter.
	  However I chose to avoid forcing the /ari prefix of the URI's to
	  be lower case for now. Except for the two cases here, all URI's
	  should be lower case, unless they are part of a resource name or
	  id. Review: https://reviewboard.asterisk.org/r/3211/ Reported by:
	  Zane Conkle (closes issue ASTERISK-23125) ........ Merged
	  revisions 408140 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/format.c, /: format.c: correct possible null pointer
	  dereference In ast_format_sdp_parse and ast_format_sdp_generate
	  the check checks for a valid interface and function were
	  potentially confusing, and hid an error in the test of the
	  presence of the function that is called later. This patch clears
	  up and corrects the test. Review:
	  https://reviewboard.asterisk.org/r/3208/ (closes issue
	  ASTERISK-23098) Reported by: marcelloceschia Patches:
	  main_format.patch uploaded by marcelloceschia (license 6036)
	  ASTERISK-23098.patch uploaded by coreyfarrell (license 5909)
	  ........ Merged revisions 408137 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408138 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-14 13:31 +0000 [r408086]  Walter Doekes <walter+asterisk@wjd.nu>

	* Makefile, /: buildsystem: Don't force main to depend on
	  everything else. Directory 'main' only needs to depend on
	  embedded modules. If no module embedding is selected, the
	  dependency is dropped. Review:
	  https://reviewboard.asterisk.org/r/3212/ ........ Merged
	  revisions 408083 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 408084 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 408085 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-14 12:41 +0000 [r408070]  Matthew Jordan <mjordan@digium.com>

	* /, channels/chan_sip.c: chnan_sip: Set SIP_DEFER_BYE_ON_TRANSFER
	  prior to calling bridge blind transfer This patch moves setting
	  SIP_DEFER_BY_ON_TRANSFER prior to calling
	  ast_bridge_transfer_blind. This prevents a BYE from being sent
	  prior to the NOTIFY request that informs the transferor if the
	  transfer succeeded or failed. This patch also clears said flag
	  from the off nominal NOTIFY paths in the local_attended_transfer
	  code, as once we've sent the NOTIFY request it is safe to send by
	  the BYE request. This was caught by the
	  blind-transfer-accountcode test in the Asterisk Test Suite.
	  (closes issue ASTERISK-23290) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3214/ ........ Merged
	  revisions 408069 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-14 08:52 +0000 [r408059]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, build_tools/install_subst (added): install_subst:
	  helper script for installing with path substitution A helper
	  script to copy a source file substituting any
	  __ASTERISK_<foo>_DIR__ with the content of $AST<foo>DIR. Review:
	  https://reviewboard.asterisk.org/r/3202/

2014-02-13 18:52 +0000 [r407990-408006]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_pubsub.c, /, res/res_pjsip_mwi.c: Remove all PJSIP
	  MWI-specific use from our MWI code. PJSIP has built-in MWI code
	  that could be useful to some degree, but our utilization of the
	  API actually made our code a bit more cluttered since we had to
	  have special cases peppered throughout. With this change, we move
	  to using the pjsip_evsub API instead, which streamlines the code
	  by removing special cases. Review:
	  https://reviewboard.asterisk.org/r/3205 ........ Merged revisions
	  408005 from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip/location.c: Fix crash in AMI PJSIPShowEndpoint
	  action. If an AOR has no permanent contacts, then the
	  permanent_contacts container is never allocated. This makes the
	  code safe in the face of NULLs. I also changed the variable that
	  counts contacts from "num" to "total_contacts" since there are
	  now two variables that are indicate numbers of things. ........
	  Merged revisions 407988 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-13 15:51 +0000 [r407989]  Kinsey Moore <kmoore@digium.com>

	* main/logger.c, CHANGES: Logger: Add dynamic logger channels This
	  adds the ability to dynamically add and remove logger channels
	  from Asterisk via the CLI. (closes issue AST-1150) Review:
	  https://reviewboard.asterisk.org/r/3185/

2014-02-12 08:25 +0000 [r407970]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, main/config.c: realtime: Fix ast_update2_realtime() on
	  raspberry pi. The old code depended on undefined va_arg
	  behaviour: calling a function twice with the same va_list
	  parameter and expecting it to continue where it left off. The
	  changed code behaves like the manpage says it should. Also added
	  a bunch of early returns to trap errors (e.g. OOM) instead of
	  crashing. The problem was found by Julian Lyndon-Smith. The
	  deviant behaviour on the raspberry PI also uncovered another bug
	  (fixed in r407875) in the res_config_pgsql.so driver. Reported
	  by: jmls Tested by: jmls Review:
	  https://reviewboard.asterisk.org/r/3201/ ........ Merged
	  revisions 407968 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-11 20:17 +0000 [r407958]  Joshua Colp <jcolp@digium.com>

	* main/sched.c: scheduler: Remove hashtab usage. This is a first
	  stab at tweaking the performance profile of the scheduler.
	  Removing the hashtab usage removes an extra memory allocation
	  when scheduling something and makes it so rescheduling does not
	  incur any memory allocation at all. Review:
	  https://reviewboard.asterisk.org/r/3199/

2014-02-11 03:18 +0000 [r407940]  Matthew Jordan <mjordan@digium.com>

	* res/ari/resource_channels.c, /: ari/resource_channels: Add
	  channel variables earlier in the creation process This patch
	  tweaks the behaviour of POST /channels with channel variables
	  such that the variables are passed into the pbx.c routines that
	  perform the origination. This allows the variables to be assigned
	  to the newly created channels immediately upon their
	  construction, as opposed to be assigned after the originate has
	  completed. The upshot of this is that the variables are available
	  on the channels if they execute in the dialplan, as opposed to
	  only being available once the channels are answered. Review:
	  https://reviewboard.asterisk.org/r/3183/ ........ Merged
	  revisions 407937 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-10 18:28 +0000 [r407926]  Corey Farrell <git@cfware.com>

	* channels/sip/include/reqresp_parser.h,
	  channels/sip/include/route.h (added), channels/chan_sip.c,
	  channels/sip/route.c (added), channels/sip/include/sip.h:
	  chan_sip: Isolate code that manages struct sip_route. * Move
	  route code to sip/route.c + sip/include/route.h * Rename
	  functions to sip_route_* * Replace ad-hoc list code with macro's
	  from linkedlists.h * Create sip_route_process_header() to
	  processes Path and Record-Route headers (previously done with
	  different code in build_route and build_path) * Add use of const
	  where possible * Move struct uriparams, struct contact and
	  contactliststruct from sip.h to reqresp_parser.h. sip/route.c
	  uses reqresp_parser.h but not sip.h, this was a problem. These
	  moved declares are not used outside of reqresp_parser. * While
	  modifying reqprep() the lack of {} caused me trouble. I added
	  them. * Code outside route.c treats sip_route as an opaque
	  structure, using macro's or procedures for all access. (closes
	  issue ASTERISK-22582) Reported by: Corey Farrell Review:
	  https://reviewboard.asterisk.org/r/3173/

2014-02-10 16:49 +0000 [r407876]  Walter Doekes <walter+asterisk@wjd.nu>

	* res/res_config_pgsql.c, /: res_config_pgsql: Fix
	  ast_update2_realtime calls. Fix so multiple updates from a single
	  call works (add missing ','). Remove bogus ast_free's that
	  weren't supposed to be there. Moved a few spaces for readability.
	  Review: https://reviewboard.asterisk.org/r/3194/ ........ Merged
	  revisions 407873 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407874 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407875 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-10 16:01 +0000 [r407859]  Kinsey Moore <kmoore@digium.com>

	* apps/app_confbridge.c, apps/confbridge/conf_state_multi_marked.c,
	  apps/confbridge/conf_state_empty.c,
	  apps/confbridge/conf_config_parser.c,
	  configs/confbridge.conf.sample, /,
	  apps/confbridge/include/confbridge.h, UPGRADE.txt: ConfBridge:
	  Correct prompt playback target Currently, when the first marked
	  user enters the conference that contains waitmarked users, a
	  prompt is played indicating that the user is being placed into
	  the conference. Unfortunately, this prompt is played to the
	  marked user and not the waitmarked users which is not very
	  helpful. This patch changes that behavior to play a prompt
	  stating "The conference will now begin" to the entire conference
	  after adding and unmuting the waitmarked users since the design
	  of confbridge is not conducive to playing a prompt to a subset of
	  users in a conference in an asynchronous manner. (closes issue
	  PQ-1396) Review: https://reviewboard.asterisk.org/r/3155/
	  Reported by: Steve Pitts ........ Merged revisions 407857 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407858 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-07 20:52 +0000 [r407767]  Richard Mudgett <rmudgett@digium.com>

	* /, channels/chan_iax2.c: chan_iax2: Add some more iaxs[] NULL
	  checks to a routine already full of them. ........ Merged
	  revisions 407764 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407765 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407766 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-07 20:17 +0000 [r407752]  Matthew Jordan <mjordan@digium.com>

	* /, main/security_events.c: security_events: Fix assertion failure
	  in dev-mode on optional IE parsing When formatting an optional
	  IE, the value is, of course, optional. As such, it is entirely
	  appropriate for ast_json_object_get to return NULL. If that
	  occurs, we now simply skip the IE that was requested, as it was
	  not provided by the entity that raised the event. Thanks to
	  George Joseph (gtjoseph) for catching this and reporting it in
	  #asterisk-dev ........ Merged revisions 407750 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-07 20:01 +0000 [r407749]  Joshua Colp <jcolp@digium.com>

	* main/timing.c, res/res_timing_pthread.c, res/res_timing_dahdi.c,
	  res/res_timing_timerfd.c, include/asterisk/timing.h,
	  res/res_timing_kqueue.c: timing: Improve performance for most
	  timing implementations. This change allows timing implementation
	  data to be stored directly on the timer itself thus removing the
	  requirement for many implementations to do a container lookup for
	  the same information. This means that API calls into timing
	  implementations can directly access the information they need
	  instead of having to find it. Review:
	  https://reviewboard.asterisk.org/r/3175/

2014-02-07 19:40 +0000 [r407748]  Matthew Jordan <mjordan@digium.com>

	* /, funcs/func_cdr.c: funcs/func_cdr: Handle empty time values
	  when extracting parsed values When extracting timestamps that are
	  parsed, time stamp values that are not set (time values of
	  0.000000) should not actually result in a parsed string. The
	  value should be skipped, and the result of the CDR function
	  should be an empty string. Prior to this patch, the result was
	  fed to the time formatting, which would result in an output of a
	  date/time in 1969. ........ Merged revisions 407747 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-07 18:29 +0000 [r407731]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_iax2.c, include/asterisk/frame.h,
	  configs/iax.conf.sample, /: chan_iax2: Block unnecessary control
	  frames to/from the wire. Establishing an IAX2 call between
	  Asterisk v1.4 and v1.8 (or later) results in an unexpected call
	  disconnect. The problem happens because newer values in the enum
	  ast_control_frame_type are not consistent between the branch
	  versions of Asterisk. For example: 1) v1.4 calls v1.8 (or later)
	  using IAX2 2) v1.8 answers and sends a connected line update
	  control frame. (on v1.8 AST_CONTROL_CONNECTED_LINE = 22) 3) v1.4
	  receives the control frame as an end-of-q (on v1.4
	  AST_CONTROL_END_OF_Q = 22) 4) v1.4 disconnects the call once the
	  receive queue becomes empty. Several things are done by this
	  patch to fix the problem and attempt to prevent it from happening
	  again in the future: * Added a warning at the definition of enum
	  ast_control_frame_type about how to add new control frame values.
	  * Made block sending and receiving control frames that have no
	  reason to go over the wire. * Extended the connectedline iax.conf
	  parameter to also include the redirecting information updates. *
	  Updated the connectedline iax.conf parameter documentation to
	  include a notice that the parameter must be "no" when the peer is
	  an Asterisk v1.4 instance. (closes issue AST-1302) Review:
	  https://reviewboard.asterisk.org/r/3174/ ........ Merged
	  revisions 407678 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407727 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407729 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-07 16:47 +0000 [r407677]  Matthew Jordan <mjordan@digium.com>

	* /, main/security_events.c: security_events: Fix error caused by
	  DTD validation error The appdocsxml.dtd specifies that a
	  "required" attribute in a parameter may have a value of yes, no,
	  true, or false. On some systems, specifying "False" instead of
	  "false" would cause a validation error. This patch fixes the
	  casing to explicitly match the DTD. ........ Merged revisions
	  407676 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-07 13:15 +0000 [r407625]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, configs/indications.conf.sample: indications.conf: add stutter
	  tone; end properly * If the "stutter" (voicemail indication) tone
	  is indeed a stutter tone, and it ends with a constant tone, make
	  sure that it is the dial tone. This was done for India (in),
	  Mexico (mx) and the Philippines (ph). * If no "stutter" tone
	  exists for a country, provide one. This was done for Spain (es),
	  Malaysia (my) and Venezuela (ve). Review:
	  https://reviewboard.asterisk.org/r/3158/ ........ Merged
	  revisions 407622 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407623 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407624 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-06 21:24 +0000 [r407602]  Matthew Jordan <mjordan@digium.com>

	* /, main/security_events.c, UPGRADE.txt, CHANGES: security_events:
	  Add AMI documentation; output optional fields This patch adds
	  documentation for the Security Events that are emited over AMI.
	  It also notes these events in the UPGRADE/CHANGES file. ........
	  Merged revisions 407589 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-06 19:58 +0000 [r407588]  Rusty Newton <rnewton@digium.com>

	* /, configs/pjsip.conf.sample: configs/pjsip.conf.sample:
	  Configuration section naming in pjsip.conf.sample needs a little
	  clarification There is a bit of nuance to how you name things in
	  pjsip.conf. This is a documentation patch to at least clear it up
	  a little for users. Review:
	  https://reviewboard.asterisk.org/r/3180/ ........ Merged
	  revisions 407587 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-06 18:11 +0000 [r407574]  Kevin Harwell <kharwell@digium.com>

	* /,
	  contrib/ast-db-manage/config/versions/2fc7930b41b3_add_pjsip_endpoint_options_for_12_1.py:
	  pjsip realtime: already created enum failure for postgresql If an
	  enum had been previously created the alembic script would attempt
	  to re-create it and an error would be generated while running
	  migrations for a postgresql server. The work around for this is
	  to use the ENUM object type for postgres as opposed to the
	  generic enum type used by sqlalchemy. Using this type in the
	  script seems to work properly for both postgres and mysql.
	  ........ Merged revisions 407572 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-06 17:55 +0000 [r407573]  Richard Mudgett <rmudgett@digium.com>

	* res/res_pjsip_logger.c,
	  res/res_pjsip/include/res_pjsip_private.h,
	  res/res_pjsip/pjsip_options.c, res/res_pjsip/config_transport.c,
	  include/asterisk/res_pjsip.h, res/res_pjsip/config_global.c,
	  res/res_pjsip/config_auth.c, /, res/res_pjsip/location.c,
	  res/res_pjsip_outbound_registration.c,
	  res/res_pjsip_endpoint_identifier_ip.c,
	  include/asterisk/res_pjsip_cli.h, res/res_pjsip/pjsip_cli.c,
	  res/res_pjsip/pjsip_configuration.c,
	  res/res_pjsip/config_domain_aliases.c: res_pjsip: Updates and
	  adds more PJSIP CLI commands. * Adds identify, transport, and
	  registration support to the PJSIP CLI. * Creates three additional
	  callbacks, one for an iterator, one for a comparator, and one for
	  a container. This eliminates the link dependency from higher
	  level modules to lower level ones. * Eliminates duplicate sorting
	  in PJSIP CLI commands. * Cleans up PJSIP CLI output formatting. *
	  Pushes CLI command registration down to the implementing source
	  file. * Adds several ast_sip_destroy_sorcery functions to
	  complement existing ast_sip_sorcery_initialize functions. The
	  destroy functions unregister PJSIP CLI commands and PJSIP CLI
	  formatters. Reported by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3104/ ........ Merged
	  revisions 407568 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-05 23:04 +0000 [r407514]  Rusty Newton <rnewton@digium.com>

	* /, formats/format_wav.c: formats/format_wav: enhancing log
	  message "Not a wav file" to be clear on what is supported
	  Modifying the log message to be more specific as to what is
	  supported. Specifically it seems format_wav supports only PCM
	  encoded versions with a lower-case '.wav' extension. (closes
	  issues ASTERISK-22310) Reported by: Jim Credland Review:
	  https://reviewboard.asterisk.org/r/3188/ ........ Merged
	  revisions 407511 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407512 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407513 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-05 20:56 +0000 [r407462]  Jonathan Rose <jrose@digium.com>

	* CHANGES, /: CHANGES: Improved description of Name/Creator changes
	  to bridge ARI, adds AMI The changes log was written with language
	  that was a little too internal Asterisk specific, so it's been
	  changed to be more in the frame of reference of an ARI user.
	  Also, previously the AMI event changes were omitted from the
	  change log as well as the ability to include a bridge name in the
	  ARI post bridges command. ........ Merged revisions 407461 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-05 20:43 +0000 [r407459]  Kinsey Moore <kmoore@digium.com>

	* main/logger.c, /: Logger: Fix handling of absolute paths This
	  fixes path handling for log files so that an extra / is not
	  appended to the file path when the path is absolute (begins with
	  /). This would previously result in different but functionally
	  equivalent paths in the output of 'logger show channels'.
	  ........ Merged revisions 407455 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407456 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407458 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-05 19:42 +0000 [r407443]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip/config_global.c, /: res_pjsip: When no global type
	  the debug option defaults to "yes" If the global section was not
	  specified in pjsip.conf then the configuration object does not
	  exist in sorcery so when retrieving "debug" option it would
	  return NULL. Then the NULL result was passed to ast_false utils
	  function which would return false because it wasn't set to some
	  representation of false, thus enabling sip debug logging. Made it
	  so if the global config object does not exist then it will return
	  a default of "no" for sip debugging. (issue ASTERISK-23038)
	  Reported by: Rusty Newton ........ Merged revisions 407442 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-05 17:42 +0000 [r407422-407425]  Jonathan Rose <jrose@digium.com>

	* CHANGES: CHANGES: Update changes log to include r403414 entry
	  Adds note of additional 0 for operator option on app_record

	* CHANGES, /: CHANGES: Update changes log to include new bridge
	  fields added in r404042 ........ Merged revisions 407419 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-05 15:29 +0000 [r407407]  Matthew Jordan <mjordan@digium.com>

	* rest-api/api-docs/playbacks.json, UPGRADE.txt,
	  rest-api/api-docs/sounds.json, rest-api/resources.json, CHANGES,
	  include/asterisk/manager.h, rest-api/api-docs/bridges.json,
	  rest-api/api-docs/deviceStates.json,
	  rest-api/api-docs/mailboxes.json,
	  rest-api/api-docs/asterisk.json,
	  rest-api/api-docs/applications.json,
	  rest-api/api-docs/channels.json,
	  rest-api/api-docs/recordings.json,
	  rest-api/api-docs/endpoints.json, rest-api/api-docs/events.json,
	  /: ARI/AMI: Update versions; update UPGRADE/CHANGES notes for
	  12.1.0 changes Due to backwards compatible changes made to
	  AMI/ARI, the version needs to be bumped to 1.1.0/2.1.0,
	  respectively. ........ Merged revisions 407402 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-04 20:15 +0000 [r407275-407340]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/devicestate.h, /, main/devicestate.c:
	  devicestate: Make ast_devstate_changed_literal() return value and
	  doxygen consistent. Nothing actually cares about the value
	  anyway. (closes issue ASTERISK-23178) Reported by: Jonathan Rose
	  ........ Merged revisions 407337 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407338 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407339 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip/pjsip_configuration.c: res_pjsip: Fix assertion
	  for pjsip.conf authorization list options. (closes issue
	  ASTERISK-23168) Reported by: George Joseph Review:
	  https://reviewboard.asterisk.org/r/3143/ ........ Merged
	  revisions 407324 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* configs/sip.conf.sample, main/tcptls.c, /: tcptls.c: Made TLS
	  handle a certificate chain file. Thanks to Guillaume Martres for
	  doing the necessary research to validate the change. (closes
	  issue ASTERISK-17727) Reported by: LN Patches:
	  use_certificate_chain.patch (license #5864) patch uploaded by st
	  documente_certificate_chain.patch (license #6576) patch uploaded
	  by Guillaume Martres ........ Merged revisions 407272 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407273 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407274 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-04 16:55 +0000 [r407260]  Matthew Jordan <mjordan@digium.com>

	* /, funcs/func_cdr.c: funcs/func_cdr: Fix non-epoch timestamps
	  broken by improper char array deref Thanks to snuffy for pointing
	  this issue out and fixing it. (closes issue ASTERISK-23250)
	  Reported by: snuffy patches: func_cdr-fix.diff uploaded by snuffy
	  (License 5024) ........ Merged revisions 407259 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-04 02:22 +0000 [r407217]  Joshua Colp <jcolp@digium.com>

	* res/res_clialiases.c, /: res_clialiases: Fix crash when reloading
	  and re-aliasing an alias that is in use. The code assumed that
	  unregistering the alias would always succeed while in practice
	  this is not actually true. A common case is the "reload" command
	  itself. If the cli_aliases.conf configuration file was changed
	  and reload executed the command would fail to unregister and
	  ultimately point to freed memory. The reload process now checks
	  whether unregistering succeeded or not and if not the old CLI
	  alias is retained. (closes issue ASTERISK-19773) Reported by:
	  Joel Vandal (closes issue ASTERISK-22757) Reported by: Gareth
	  Blades ........ Merged revisions 407205 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407210 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407213 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-04 02:07 +0000 [r407198]  Damien Wedhorn <voip@facts.com.au>

	* /, channels/chan_skinny.c: Skinny - Fix deadlock when pickup of
	  no call. Locking issues in skinny when picking up a call that
	  doesn't exist. Cleaned up sub locking by fully removing and using
	  the chan lock instead. Also changed ast_call_pickup to check
	  whether chan was masq'd. (closes issue ASTERISK-23249) Reported
	  by: wedhorn Tested by: snuffy, myself Patches:
	  skinny-locking01.diff uploaded by wedhorn (license 5019) ........
	  Merged revisions 407197 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-03 01:31 +0000 [r407169]  Matthew Jordan <mjordan@digium.com>

	* main/cdr.c, /: cdrs: Check for applications to lock onto during
	  dial begin handling This patch brings CDR processing further in
	  line with r407085. During some dial operations, the application
	  would not be locked to the Dial application and would instead
	  continue to show the previously known application. In particular,
	  this would occur when a Parked call would time out. This was due
	  to a previous snapshot already locking the application to Park -
	  processing this in a Dial Begin allows the Dial application to
	  reassert its rightful place. (CDRs. Ugh.) But hooray for the
	  Parked Call tests for catching this in the Asterisk Test Suite.
	  ........ Merged revisions 407166 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-01 16:26 +0000 [r407154]  Joshua Colp <jcolp@digium.com>

	* res/ari/ari_model_validators.h, rest-api/api-docs/events.json, /,
	  res/stasis/app.c, res/ari/ari_model_validators.c,
	  res/res_stasis.c, main/stasis_bridges.c: res_stasis: Enable
	  transfers and provide events when they occur. This change enables
	  transfers within ARI created bridges and adds events for when
	  they occur. Unlike other events these will be received if *any*
	  subscribed object is involved in the transfer. (closes issue
	  ASTERISK-22984) Reported by: David M. Lee Review:
	  https://reviewboard.asterisk.org/r/3120/ ........ Merged
	  revisions 407153 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-02-01 00:25 +0000 [r407105]  Corey Farrell <git@cfware.com>

	* apps/app_stack.c, /: app_stack: protect against missing
	  parameters to STACK_PEEK and LOCAL_PEEK STACK_PEEK requires 2
	  parameters and LOCAL_PEEK requires 1 parameter. This protects
	  against situations where those parameters are blank or missing by
	  logging an error and returning. (closes issue ASTERISK-23220)
	  Reported by: James Sharp ........ Merged revisions 407100 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 407103 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407104 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-31 23:40 +0000 [r407083-407085]  Matthew Jordan <mjordan@digium.com>

	* apps/app_dial.c, main/cdr.c, main/pbx.c, /, main/bridge_after.c,
	  UPGRADE.txt, main/manager_channels.c: CDRs: fix a variety of dial
	  status problems, h/hangup handler creating CDRs This patch fixes
	  a number of small-ish problems that were noticed when witnessing
	  the records that the FreePBX dialplan produces: (1) Mid-call
	  events (as well as privacy options) have the ability to change
	  the overall state of the Dial operation after the called party
	  answers. This means that publishing the DialEnd event when the
	  called party is premature; we have to wait for the execution of
	  these subroutines to complete before we can signal the overall
	  status of the DialEnd. This patch moves that publication and adds
	  handlers for the mid-call events. (2) The AST_FLAG_OUTGOING
	  channel flag is cleared if an after bridge goto datastore is
	  detected. This flag was preventing CDRs from being recorded for
	  all outbound channels that had a 'continue' option enabled on
	  them by the Dial application. (3) The CDR engine now locks the
	  'Dial' application as being the CDR application if it detects
	  that the current CDR has entered that app. This is similar to the
	  logic that is done for Parking. In general, if we entered into
	  Dial, then we want that CDR to record the application as such -
	  this prevents pre-dial handlers, mid-call handlers, and other
	  shenaniganry from changing the application value. (4) The CDR
	  engine now checks for the AST_SOFTHANGUP_HANGUP_EXEC in more
	  places to determine if the channel is in hangup logic or dead. In
	  either case, we don't want to record changes in the channel. (5)
	  The default option for "endbeforehexten" has been changed to
	  "yes". In general, you don't want to see CDRs in the 'h' exten or
	  in hangup logic. Since the semantics of that option changed in
	  12, it made sense to update the default value as well. (6)
	  Finally, because we now have the ability to synchronize on the
	  messages published to the CDR topic, on shutdown the CDR engine
	  will now synchronize to the messages currently in flight. This
	  helps to ensure that all in-flight CDRs are written before
	  shutting down. (closes issue ASTERISK-23164) Reported by: Matt
	  Jordan Review: https://reviewboard.asterisk.org/r/3154 ........
	  Merged revisions 407084 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/app_dial.c, /: app_dial: Allow macro/gosub pre-bridge
	  execution to occur on priorities The parsing for the destination
	  of the macro/gosub uses the '^' character to separate out
	  context, extension, and priority. However, the logic for the
	  macro/gosub execution was written such that it would only do the
	  actual macro/gosub jump if a '^' character existed. This doesn't
	  apply when the macro/gosub jump occurs in a priority/priority
	  label. This patch changes the logic so that the parsing still
	  occurs, but the jump will occur even for priorities/priority
	  labels. (issue ASTERISK-23164) Review:
	  https://reviewboard.asterisk.org/r/3154 ........ Merged revisions
	  407041 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 407074 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 407082 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-31 23:15 +0000 [r407035-407037]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_logger.c, CHANGES, res/res_pjsip.c,
	  include/asterisk/res_pjsip.h, res/res_pjsip/config_global.c,
	  contrib/ast-db-manage/config/versions/21e526ad3040_add_pjsip_debug_option.py
	  (added), /, configs/pjsip.conf.sample, UPGRADE.txt: res_pjsip:
	  Config option to enable PJSIP logger at load time. Added a
	  "debug" configuration option for res_pjsip that when set to "yes"
	  enables SIP messages to be logged. It is specified under the
	  "system" type. Also added an alembic script to add the option to
	  realtime. (closes issue ASTERISK-23038) Reported by: Rusty Newton
	  Review: https://reviewboard.asterisk.org/r/3148/ ........ Merged
	  revisions 407036 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_exten_state.c, /: res_pjsip_exten_state: Exporting
	  global symbols caused load order issues Removed the exportation
	  of global symbols from the module as it is no longer needed and
	  it could potentially cause load problems as on some systems it
	  would try to load before res_pjsip_pubsub ........ Merged
	  revisions 407034 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-31 23:04 +0000 [r407033]  Richard Mudgett <rmudgett@digium.com>

	* CHANGES, apps/app_chanspy.c: ChanSpy: Add ability to specify
	  channel uniqueids as well as channel names. * Made ChanSpy accept
	  a channel uniqueid or a fully specified channel name as the
	  chanprefix parameter if the 'u' option is specified. (closes
	  issue AFS-42) Review: https://reviewboard.asterisk.org/r/3160/

2014-01-31 22:39 +0000 [r407030-407032]  Mark Michelson <mmichelson@digium.com>

	* include/asterisk/res_pjsip_presence_xml.h (added), /: Add file
	  that apparently got missed in the merge. ........ Merged
	  revisions 407031 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_pidf_body_generator.c (added),
	  include/asterisk/res_pjsip_exten_state.h (removed),
	  res/res_pjsip_pubsub.exports.in, /,
	  include/asterisk/res_pjsip_body_generator_types.h (added),
	  res/res_pjsip_mwi.c, res/res_pjsip_xpidf_body_generator.c
	  (added), res/res_pjsip_mwi_body_generator.c (added),
	  res/res_pjsip_pubsub.c, res/res_pjsip_pidf.c (removed),
	  res/res_pjsip_pidf_eyebeam_body_supplement.c (added),
	  res/res_pjsip_exten_state.c, res/res_pjsip/presence_xml.c
	  (added), include/asterisk/res_pjsip_pubsub.h: Decouple
	  subscription handling from NOTIFY/PUBLISH body generation. When
	  the PJSIP pubsub framework was created, subscription handlers
	  were required to state what event they handled along with what
	  body types they knew how to generate. While this serves well when
	  implementing a base RFC, it has problems when trying to extend
	  the body to support non-standard or proprietary body elements.
	  The code also was NOTIFY-specific, meaning that when the time
	  comes that we start writing code to send out PUBLISH requests
	  with MWI or presence bodies, we would likely find ourselves
	  duplicating code that had previously been written. This changeset
	  introduces the concept of body generators and body supplements. A
	  body generator is responsible for allocating a native structure
	  for a given body type, providing the primary body content,
	  converting the native structure to a string, and deallocating
	  resources. A body supplement takes the primary body content (the
	  native structure, not a string) generated by the body generator
	  and adds nonstandard elements to the body. With these elements
	  living in their own module, it becomes easy to extend our support
	  for body types and to re-use resources when sending a PUBLISH
	  request. Body generators and body supplements register themselves
	  with the pubsub core, similar to how subscription and publish
	  handlers had done. Now, subscription handlers do not need to know
	  what type of body content they generate, but they still need to
	  inform the pubsub core about what the default body type for a
	  given event package is. The pubsub core keeps track of what body
	  generators and body supplements have been registered. When a
	  SUBSCRIBE arrives, the pubsub core will check that there is a
	  subscription handler for the event in the SUBSCRIBE, then it will
	  check that there is a body generator that can provide the content
	  specified in the Accept header(s). Because of the nature of body
	  generators and supplements, it means res_pjsip_exten_state and
	  res_pjsip_mwi have been completely gutted. They no longer worry
	  about body types, instead calling
	  ast_sip_pubsub_generate_body_content() when they need to generate
	  a NOTIFY body. Review: https://reviewboard.asterisk.org/r/3150
	  ........ Merged revisions 407016 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-31 22:23 +0000 [r407015-407029]  Kevin Harwell <kharwell@digium.com>

	* contrib/ast-db-manage/config/versions/581a4264e537_adding_extensions.py,
	  contrib/ast-db-manage/config/versions/2fc7930b41b3_add_pjsip_endpoint_options_for_12_1.py,
	  /, UPGRADE.txt: alembic: script modifications due to errors A
	  couple of the scripts had errors that would not allow a full
	  migration to take place. The extensions table needed to make its
	  'id' column a primary key in order to work with mysql. The other
	  script ...add_endpoints... was missing tables that it was trying
	  to add columns to. Added the primary key on id for extensions and
	  added the tables in for the missing pjsip configuration options.
	  While it is not ideal to modify already released scripts this was
	  a case where it had to be done due to errors in the script and
	  lacking a better alternative. Review:
	  https://reviewboard.asterisk.org/r/3167/ ........ Merged
	  revisions 407019 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_mwi.c: res_pjsip_mwi: Subscribe fails when
	  missing aor name When subscribing to MWI (res_pjsip_mwi) and the
	  sip uri did not contain a name (ex: sip:<ip address>) then the
	  subscription would fail since it would be unable to locate an
	  associated aor. This patch makes it so that when a subscribe
	  comes with no aor name then it will subscribe to all aors on the
	  located endpoint. (closes issue ASTERISK-23072) Reported by: Bob
	  M Review: https://reviewboard.asterisk.org/r/3164/ ........
	  Merged revisions 407014 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-31 15:08 +0000 [r407001]  Kinsey Moore <kmoore@digium.com>

	* res/res_pjsip_nat.c, /: PJSIP: Fix address for ACK in NAT
	  situations In NAT scenarios where a call is placed to a
	  Grandstream phone, res_pjsip will sometimes send the ACK to a 200
	  OK to the private address of the device behind the NAT instead of
	  the address of the NAT device. This corrects that behavior by
	  rewriting the address in the Contact header in the incoming 200
	  OK and the dialog's target address if necessary (since it has
	  already been rewritten to the incorrect private address). (closes
	  issue ASTERISK-23106) Review:
	  https://reviewboard.asterisk.org/r/3168/ Reported by: Matt Jordan
	  ........ Merged revisions 407000 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-31 05:31 +0000 [r406988]  Damien Wedhorn <voip@facts.com.au>

	* /, channels/chan_skinny.c: Skinny: fix up possible double unlock
	  of chan. Return before chan is possibly unlocked a second time
	  when hanging up a channel in SUBSTATE_OFFHOOK. ........ Merged
	  revisions 406987 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-30 20:36 +0000 [r406936]  Corey Farrell <git@cfware.com>

	* main/udptl.c, res/res_rtp_asterisk.c, /: res_rtp_asterisk &
	  udptl: fix port selection to work with SELinux restrictions
	  ast_bind to a port reserved for another program by SELinux causes
	  errno == EACCES. This caused random failures when binding rtp or
	  udptl sockets. Treat EACCES as a non-fatal error, try next port.
	  (closes issue ASTERISK-23134) Reported by: Corey Farrell ........
	  Merged revisions 406933 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406934 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406935 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-30 17:35 +0000 [r406920]  Sean Bright <sean@malleable.com>

	* main/manager.c, /: Make a NOTICE about an invalid channel name
	  more useful. ........ Merged revisions 406918 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406919 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-29 00:44 +0000 [r406863]  Russell Bryant <russell@russellbryant.com>

	* /, configs/queues.conf.sample: queues.conf.sample Fix documented
	  default for persistentmembers Closes issue ASTERISK-22662
	  ........ Merged revisions 406860 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406861 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406862 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-28 23:40 +0000 [r406789-406848]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_pubsub.c, /: res_pjsip_pubsub: potential crash on
	  timeout What seems to be happening is if a subscription has been
	  terminated and the subscription timeout/expires is less than the
	  time it takes for all pending transactions (currently on the
	  subscription) to end then the subscription timer will not have
	  been canceled yet and sub will be null. Since the subscription
	  has already been canceled nothing needs to be done so a null
	  check in the asterisk code is sufficient in working around this
	  problem. (closes issue ASTERISK-23129) Reported by: Dan Jenkins
	  ........ Merged revisions 406847 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* cdr/cdr_radius.c, cel/cel_radius.c, /, configure,
	  include/asterisk/autoconfig.h.in, configure.ac: cdr_radius,
	  cel_radius: build agains libfreeradius-client Asterisk's RADIUS
	  module currently build against libradiusclient-ng, but this
	  project has been superseeded by libfreeradius-client. The API is
	  99% compatible except that the header name has changed, the
	  library name has changed, and the configuration file location has
	  changed. (closes issue ASTERISK-22980) Reported by: Jeremy Lainé
	  Patches: freeradius-client.patch uploaded by sharky (license
	  6561) ........ Merged revisions 406801 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406802 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406803 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip/include/res_pjsip_private.h, /,
	  include/asterisk/compat.h: res_pjsip,compat: INFINITY and NAN
	  undefined On some systems the values for INFINITY and NAN are not
	  defined thus causing a build error on those systems. Added
	  definitions for those if they had not previously been defined.
	  (closes issue ASTERISK-23056) Reported by: capouch Patches:
	  inf-nan-patch.txt uploaded by capouch (license 6564) ........
	  Merged revisions 406788 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-28 19:19 +0000 [r406778]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_stasis_device_state.c: ARI: Make double subscribe
	  respond with success Currently, attempting to subscribe an
	  application to a device state that it has already subscribed to
	  will generate a 500 error response. This will now be treated as a
	  subscription refresh even though ARI subscriptions don't
	  currently support lifetimes and will respond with the normal
	  response for a successful subscription (200 OK). (closes issue
	  ASTERISK-23143) Reported by: Matt Jordan ........ Merged
	  revisions 406775 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-28 16:43 +0000 [r406724]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/rtp_engine.c, /: rtp_engine: improved handling of
	  get_rtp_info failure In ast_rtp_instance_make_compatible(), after
	  a failure of channel tech call get_rtp_info() to return
	  peer_instance, the null pointer would be passed to ao2_ref,
	  producing an error that looked like a refernce counting problem
	  but is not. This patch corrects that and adds helpful LOG_ERROR
	  messages to indicate which failure path occurred. (issue
	  AST-1276) Review: https://reviewboard.asterisk.org/r/3156/
	  ........ Merged revisions 406721 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406722 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406723 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-28 00:20 +0000 [r406710]  Richard Mudgett <rmudgett@digium.com>

	* /, tests/test_cel.c, tests/test_cdr.c: test_cdr.c, test_cel.c:
	  Correctly destroy created bridges. * Fixed the
	  test_cel_attended_transfer_bridges_link unit test to also account
	  for the local channel link being destroyed now that the bridges
	  are actually destroyed. * Made CDR unit test use its own version
	  of do_sleep() from the CEL unit tests. ........ Merged revisions
	  406707 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-27 22:54 +0000 [r406647-406696]  Kevin Harwell <kharwell@digium.com>

	* CHANGES: manager: ExtensionStatus event status human readable
	  Added a note in the changes file about the new 'StatusText' field
	  that was added to the 'ExtensionStatus' event. (issue
	  ASTERISK-23154) Reported by: Jonathan Rose

	* main/manager.c: manager: ExtensionStatus event status human
	  readable When an 'ExtensionStatus' event was raised it included
	  the status as a numerical value, but did not include a text
	  description of the status. Added a 'StatusText' field to the
	  event which is a string representation of the extension status.
	  Also added this to the 'Extension State' command response.
	  (closes issue ASTERISK-23154) Reported by: Jonathan Rose

2014-01-27 20:38 +0000 [r406646]  Russell Bryant <russell@russellbryant.com>

	* main/config.c, /: Allow nested #includes in extconfig.conf
	  extconfig.conf was hard-coded to not allow nested includes for
	  some reason. The code has been this way since a patch was merged
	  for ASTERISK-3333 (revision 4889), which was a significant update
	  to this code ("Merge config updates"). I can't figure out any
	  good reason why this should be limited. This patch just removes
	  the limit and uses the default nesting depth limit. Closes issue
	  ASTERISK-17837 Review: https://reviewboard.asterisk.org/r/3159/
	  ........ Merged revisions 406643 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406644 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406645 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-27 08:17 +0000 [r406618]  Walter Doekes <walter+asterisk@wjd.nu>

	* main/manager.c, UPGRADE.txt, configs/manager.conf.sample:
	  manager: The eventfilter= option now takes an extended regex. In
	  pre-trunk versions (...12) it accepts a basic regex, which is
	  confusing because all other regexes in asterisk are of the
	  extended kind. Review: https://reviewboard.asterisk.org/r/3147/

2014-01-27 01:25 +0000 [r406595]  Russell Bryant <russell@russellbryant.com>

	* main/file.c, include/asterisk/channel.h, main/channel.c, /:
	  Protect ast_filestream object when on a channel The
	  ast_filestream object gets tacked on to a channel via
	  chan->timingdata. It's a reference counted object, but the
	  reference count isn't used when putting it on a channel. It's
	  theoretically possible for another thread to interfere with the
	  channel while it's unlocked and cause the filestream to get
	  destroyed. Use the astobj2 reference count to make sure that as
	  long as this code path is holding on the ast_filestream and
	  passing it into the file.c playback code, that it knows it's
	  valid. Bug reported by Leif Madsen. Review:
	  https://reviewboard.asterisk.org/r/3135/ ........ Merged
	  revisions 406566 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406567 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406574 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-26 23:04 +0000 [r406517]  Richard Mudgett <rmudgett@digium.com>

	* /, main/tcptls.c: tcptls.c: Add missing cleanup on off nominal
	  path. ........ Merged revisions 406514 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406515 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406516 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-26 14:19 +0000 [r406503]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* contrib/scripts/live_ast: live_ast: run wrapped programs with
	  exec live_ast can be used as a wrapper script to run asterisk,
	  gdb or valgrind. In those cases it runs them and returns the
	  result. It is more useful to use 'exec' to avoid having another
	  odd process in the chain. Review:
	  https://reviewboard.asterisk.org/r/3110/

2014-01-26 02:11 +0000 [r406490]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_session.c, /: res_pjsip_session: Be less strict
	  with core requested outgoing capabilities. The core may
	  (depending on circumstances) request a single codec on outgoing
	  calls. Many channel drivers ignore or treat this as a suggestion
	  while still including configured codecs. The res_pjsip_session
	  logic treated this as an explicit request, leaving out other
	  configured codecs. This change makes res_pjsip_session behave
	  like other channel driver and simply adds the requested codec to
	  the list. (closes issue ASTERISK-23082) Reported by: xrobau
	  Review: https://reviewboard.asterisk.org/r/3140/ ........ Merged
	  revisions 406489 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-24 23:33 +0000 [r406466]  Richard Mudgett <rmudgett@digium.com>

	* /, main/cel.c: CEL: Protect data structures during reload and
	  shutdown. The CEL data structures need to be protected during a
	  configuration reload and shutdown. Asterisk crashed during a
	  shutdown because CEL events were still in flight and the CEL data
	  structures were already destroyed. * Protected the cel_backends,
	  cel_dialstatus_store, and cel_linkedids ao2 containers with a
	  global ao2 object wrapper. * Added NULL checks before use of the
	  cel_backends, cel_dialstatus_store, and cel_linkedids ao2
	  containers in case the CEL module is already shutdown. * Fixed
	  overloading of the cel_linkedids held objects reference count.
	  During shutdown any held objects would be leaked. * Fixed memory
	  leak of cel_linkedids held objects if the LINKEDID_END is not
	  being tracked. The objects in the cel_linkedids container were
	  not removed if the LINKEDID_END event is not used. * Added access
	  protection to the cel_backends container during the CLI "cel show
	  status" command. * Made cel_backends, cel_dialstatus_store, and
	  cel_linkedids use the standard ao2 callback templates for the
	  hash and cmp functions. * Eliminated unnecessary uses of
	  RAII_VAR(). * Made ast_cel_engine_init() cleanup alocated
	  resources on failure. (closes issue AST-1253) Reported by:
	  Guenther Kelleter Review:
	  https://reviewboard.asterisk.org/r/3128/ ........ Merged
	  revisions 406417 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406418 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406465 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-24 22:34 +0000 [r406416]  Jonathan Rose <jrose@digium.com>

	* main/utils.c, CHANGES: Thread Debugging: Add LWP to core show
	  locks output This patch adds the LWP to core show locks output if
	  it is available. Review: https://reviewboard.asterisk.org/r/3142/

2014-01-24 22:18 +0000 [r406407]  Richard Mudgett <rmudgett@digium.com>

	* main/manager.c, /: manager: Register atexit shutdown routine only
	  once. * Made register atexit shutdown routine only once in
	  __init_manager(). * Fixed some initial load failure conditions in
	  __init_manager(). * Made reset options to defaults on reload when
	  the reload will actually happen. * Removed unnecessary container
	  traversals of the white/black filters during manager_free_user().
	  * ast_free() does not need a NULL check before calling. ........
	  Merged revisions 406359 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406400 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406401 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-24 21:46 +0000 [r406399]  Jonathan Rose <jrose@digium.com>

	* res/res_config_pgsql.c, /: res_config_pgsql: Fix a memory leak
	  and use RAII_VAR for cleanup when practical Review:
	  https://reviewboard.asterisk.org/r/3141/ ........ Merged
	  revisions 406360 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406361 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406389 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-24 18:13 +0000 [r406343]  Richard Mudgett <rmudgett@digium.com>

	* main/manager.c, /: manager: Protect data structures during
	  shutdown. Occasionally, the manager module would get an
	  "INTERNAL_OBJ: bad magic number" error on a "core restart
	  gracefully" command if an AMI connection is established. * Added
	  ao2_global_obj protection to the sessions global container. *
	  Fixed the order of unreferencing a session object in
	  session_destroy(). * Removed unnecessary container traversals of
	  the white/black filters during session_destructor(). (closes
	  issue AST-1242) Reported by: Guenther Kelleter Review:
	  https://reviewboard.asterisk.org/r/3144/ ........ Merged
	  revisions 406341 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406342 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-23 23:43 +0000 [r406328]  Mark Michelson <mmichelson@digium.com>

	* /: Today is not my day for writing code that compiles. ........
	  Merged revisions 406327 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-23 22:56 +0000 [r406312]  Michael L. Young <elgueromexicano@gmail.com>

	* /, addons/res_config_mysql.c: res_config_mysql: Fix Setting The
	  Column Name Incorrectly When support for a realtime sorcery
	  module was added in revision 386731, the wrong property was
	  accidentally used for setting the column name to be updated in
	  the database table. This patch fixes the typo. (closes issue
	  ASTERISK-23177) Reported by: Denis Tested by: Denis Patches:
	  asterisk-23177-use-field-name.diff by Michael L. Young (license
	  5026) ........ Merged revisions 406311 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-23 21:18 +0000 [r406298]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_pidf.c, /: Multiple revisions 406294-406295
	  ........ r406294 | mmichelson | 2014-01-23 15:00:24 -0600 (Thu,
	  23 Jan 2014) | 11 lines Fix presence body errors found during
	  testing: * PIDF bodies were reporting an "open" state in many
	  cases where it should have been reporting "closed" * XPIDF bodies
	  had XML nodes placed incorrectly within the hierarchy. * SIP URIs
	  in XPIDF bodies did not go through XML sanitization * XML
	  sanitization had some errors: * Right angle bracket was being
	  replaced with "&rt;" instead of "&gt;" * Double quote,
	  apostrophe, and ampersand were not being escaped. ........
	  r406295 | mmichelson | 2014-01-23 15:09:35 -0600 (Thu, 23 Jan
	  2014) | 11 lines Fix presence body errors found during testing: *
	  PIDF bodies were reporting an "open" state in many cases where it
	  should have been reporting "closed" * XPIDF bodies had XML nodes
	  placed incorrectly within the hierarchy. * SIP URIs in XPIDF
	  bodies did not go through XML sanitization * XML sanitization had
	  some errors: * Right angle bracket was being replaced with "&rt;"
	  instead of "&gt;" * Double quote, apostrophe, and ampersand were
	  not being escaped. ........ Merged revisions 406294-406295 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-22 22:24 +0000 [r406269]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/pbx.c, /, utils/extconf.c: pbx.c: Pre-initialize timezone to
	  avoid crash on destroy In ast_build_timing, initialize the
	  timezone value to NULL in order to avoid deferencing an
	  uninitialized value later when calling ast_destroy_timing. The
	  timezone value could be uninitialized if ast_build_timing were to
	  fail due to a zero length time string. (closes issue
	  ASTERISK-22861) Reported by: Sebastian Murray-Roberts Review:
	  https://reviewboard.asterisk.org/r/3134/ Patches:
	  ast_build_timing-initialize-timezone.patch uploaded by
	  coreyfarrell (license 5909) ........ Merged revisions 406241 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406245 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406264 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-22 19:36 +0000 [r406153-406224]  Kinsey Moore <kmoore@digium.com>

	* /, apps/app_confbridge.c: ConfBridge: Fix channel parameter
	  documentation Confbridge AMI and CLI commands for mute, unmute,
	  and setting the single video source can accept channel prefixes
	  in lieu of a full channel name, but documentation states only
	  that it is required and is a channel name. This corrects the
	  documentation. (closes issue PQ-1397) Reported by: Steve Pitts
	  ........ Merged revisions 406217 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406223 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c: chan_sip: Decline image streams on
	  unsupported transports This change allows chan_sip to decline
	  individual image streams over unsupported transports in the SDP
	  of the 200 response. Previously, an image stream offer with
	  RTP/AVP as the transport would cause chan_sip to respond with a
	  488. (closes issue ASTERISK-22988) Reported by: adomjan Original
	  patch by: adomjan ........ Merged revisions 406170 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406171 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406172 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis_playback.c, /: res_stasis_playback: Correct error
	  argument order Several of the playback error messages for invalid
	  media input in res_stasis_playback.c had the media name and
	  channel name reversed. They now correctly identify the channel
	  name and media name. Reported by: skrusty ........ Merged
	  revisions 406152 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-21 21:48 +0000 [r406134]  Rusty Newton <rnewton@digium.com>

	* /, res/res_pjsip.c: res_pjsip: Documentation improvement for
	  Endpoint and AOR mailbox options. Making the help text for both
	  more explicit regarding the format of mailbox identifiers. i.e.
	  clarifying the format for app_voicemail mailboxes vs mailboxes
	  from external MWI sources through modules such as
	  res_external_mwi. ........ Merged revisions 406133 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-21 21:08 +0000 [r406082]  Walter Doekes <walter+asterisk@wjd.nu>

	* main/manager.c, /, configs/manager.conf.sample: manager: Clarify
	  eventfilter documentation. Textual changes only. Review:
	  https://reviewboard.asterisk.org/r/3133/ ........ Merged
	  revisions 406079 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406080 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406081 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-21 20:28 +0000 [r406006-406078]  Kinsey Moore <kmoore@digium.com>

	* channels/chan_mgcp.c, /: chan_mgcp: Enforce locking for oseq This
	  restricts direct usage of global oseq so that all accesses are
	  locked and threads are not racing to get oseq values that they
	  did not claim. This also fixes a build error in res_pktccops
	  under dev mode. (closes issue ASTERISK-23100) Reported by:
	  adomjan Patch by: adomjan ........ Merged revisions 406037 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 406038 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 406049 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_outbound_registration.c, res/res_pjsip.c: PJSIP:
	  Handle headers in a list appropriately The PJSIP header parsing
	  function (pjsip_parse_hdr) can generate more than one header
	  instance from a single header field. These header instances exist
	  as a list attached to the returned header and must be handled
	  appropriately when they are added to a message or else only the
	  first header instance will be used. This changes the linked list
	  functions used in outbound proxy code to merge the lists
	  properly. ........ Merged revisions 406020 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/ari/resource_sounds.h, res/ari/resource_bridges.h,
	  res/ari/resource_device_states.h, res/ari/resource_mailboxes.h,
	  res/ari/resource_asterisk.h, rest-api/api-docs/channels.json,
	  res/ari/resource_applications.h, res/ari/resource_channels.c,
	  res/res_ari_playbacks.c, res/res_ari_sounds.c,
	  rest-api-templates/asterisk_processor.py,
	  res/ari/resource_channels.h, res/res_ari_bridges.c, /,
	  res/res_ari_device_states.c,
	  rest-api-templates/ari_resource.h.mustache,
	  res/res_ari_mailboxes.c, res/res_ari_asterisk.c,
	  res/res_ari_applications.c,
	  rest-api-templates/res_ari_resource.c.mustache,
	  rest-api-templates/body_parsing.mustache (added),
	  res/res_ari_channels.c, res/ari/resource_playbacks.h,
	  rest-api-templates/param_parsing.mustache: ARI: Support channel
	  variables in originate This adds back in support for specifying
	  channel variables during an originate without compromising the
	  ability to specify query parameters in the JSON body. This was
	  accomplished by generating the body-parsing code in a separate
	  function instead of being integrated with the URI query parameter
	  parsing code such that it could be called by paths with body
	  parameters. This is transparent to the user of the API and
	  prevents manual duplication of code or data structures. (closes
	  issue ASTERISK-23051) Review:
	  https://reviewboard.asterisk.org/r/3122/ Reported by: Matt Jordan
	  ........ Merged revisions 406003 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-20 23:25 +0000 [r405985]  Damien Wedhorn <voip@facts.com.au>

	* /, channels/chan_skinny.c: Skinny: fix up handling of fragmented
	  packets. Bad offset in reading second or more fragment of skinny
	  packets. Fixed to offset by char (single byte) rather than size
	  of req. ........ Merged revisions 405982 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-20 22:23 +0000 [r405947]  Richard Mudgett <rmudgett@digium.com>

	* channels/sig_pri.c, /: chan_dahdi/PRI: Suppress CONNECTED_LINE
	  updates when nothing in the udpate is valid. * Also simplified
	  some subddress handling code. (closes issue ASTERISK-23008)
	  Reported by: Michael Cargile ........ Merged revisions 405926
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 405927 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405928 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-20 21:56 +0000 [r405925]  Damien Wedhorn <voip@facts.com.au>

	* /, channels/chan_skinny.c: Skinny: fix up session logging.
	  Logging from the skinny session loop was providing some incorrect
	  reasons for exiting the loop. Cleaned up messages and handling so
	  correct reason displayed. ........ Merged revisions 405924 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-20 18:18 +0000 [r405910]  Jonathan Rose <jrose@digium.com>

	* channels/chan_pjsip.c, /: chan_pjsip: Provide a means for
	  tracking device state when holding/unholding Previously PJSIP did
	  not track hold/unhold and it would always simply be 'inuse'. This
	  patch fixes that. review:
	  https://reviewboard.asterisk.org/r/3129/ ........ Merged
	  revisions 405908 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-19 00:01 +0000 [r405894]  Damien Wedhorn <voip@facts.com.au>

	* /, channels/chan_skinny.c: Skinny: fix reversed device reset from
	  CLI. Existing code would do a full device restart when "skinny
	  reset device" was entered at the CLI and do a reset when "skinny
	  reset device restart" entered. ........ Merged revisions 405893
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-17 22:09 +0000 [r405878]  Sean Bright <sean@malleable.com>

	* /, channels/chan_sip.c: Make sure the maxptime attribute is added
	  to the correct offers. ........ Merged revisions 405877 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-17 21:33 +0000 [r405862-405876]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/format_pref.c, main/sorcery.c, main/frame.c, /,
	  include/asterisk/format_pref.h, res/res_pjsip_sdp_rtp.c: pjsip:
	  fix support for allow=all This change adds improvements to
	  support for allow=all in pjsip.conf so that it functions as
	  intended. Previously, the allow/disallow socery configuration
	  would set & clear codecs from the media.codecs and media.prefs
	  list, but if all was specified the prefs list was not updated.
	  Then a call would fail when create_outgoing_sdp_stream() created
	  an SDP with no audio codecs. A new function
	  ast_codec_pref_append_all() is provided to add all codecs to the
	  prefs list - only those not already on the list. This enables the
	  configuration to specify a codec preference, but still add all
	  codecs, and even then remove some codecs, as shown in this
	  example: allow = ulaw, alaw, all, !g729, !g723 Also, the display
	  order of allow in cli output is updated to match the
	  configuration by using prefs instead of caps when generating a
	  human readable string. Finally, a change to
	  create_outgoing_sdp_stream() skips a codec when it does not have
	  a payload code instead of the call failing. (closes issue
	  ASTERISK-23018) Reported by: xrobau Review:
	  https://reviewboard.asterisk.org/r/3131/ ........ Merged
	  revisions 405875 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/http.c: http: supported chunked Transfer-Encoding This
	  change implements support for HTTP Transfer-Encoding chunked in
	  both JSON and Form (post vars) body content. A new function
	  ast_http_get_contents() handles both regular and chunked mode
	  body, returning after the entire body is received. (closes issue
	  ASTERISK-23068) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3125/ ........ Merged
	  revisions 405861 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-17 18:55 +0000 [r405778-405844]  Rusty Newton <rnewton@digium.com>

	* res/res_pjsip.c, /: Fixing some XML syntax issues with my
	  previous commit at r405777 for ASTERISK-23071 ........ Merged
	  revisions 405843 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c, doc/asterisk.8, main/features.c,
	  configs/sip.conf.sample, apps/app_queue.c, apps/app_transfer.c,
	  channels/chan_iax2.c: Documentation: doc fixes across various
	  parts of the code for ASTERISK issues 23061,23028,23046,23027
	  Fixes typos of "transfered" instead of "transferred" in various
	  code. Fixes incorrect gosub param help text for app_queue. Fixes
	  Asterisk man pages containing unquoted minus signs. Adds note
	  about the "textsupport" option in sip.conf.sample. (issue
	  ASTERISK-23061) (issue ASTERISK-23028) (issue ASTERISK-23046)
	  (issue ASTERISK-23027) (closes issue ASTERISK-23061) (closes
	  issue ASTERISK-23028) (closes issue ASTERISK-23046) (closes issue
	  ASTERISK-23027) Reported by: Eugene, Jeremy Laine, Denis
	  Pantsyrev Patches: transferred.patch uploaded by Jeremy Laine
	  (license 6561) hyphen.patch uploaded by Jeremy Laine (license
	  6561) sip.conf.sample.patch uploaded by Eugene (license 6360)
	  ........ Merged revisions 405791 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 405792 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405829 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip.c, /: res_pjsip: enhance documentation for
	  mailboxes options, for both endpoints and aors Made documentation
	  more explicit as to the use of the both options. (issue
	  ASTERISK-23071) (closes issue ASTERISK-23071) Reported by: Matt
	  Jordan ........ Merged revisions 405777 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-17 14:17 +0000 [r405766]  Walter Doekes <walter+asterisk@wjd.nu>

	* res/res_musiconhold.c, CHANGES: Enable wide band audio in
	  musiconhold streams. Review:
	  https://reviewboard.asterisk.org/r/3112/

2014-01-16 20:06 +0000 [r405747-405749]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip/pjsip_options.c, /: res_pjsip: AOR option
	  qualify_frequency not respected on startup If an endpoint had
	  previously dynamically registered a contact and the contact
	  information was successfully stored in astdb then upon restart
	  the qualify notifications would not be sent out if the
	  qualify_frequency was set. This was due to the fact that only
	  permanent contacts were being checked and scheduled for qualifies
	  on startup. Modified the code to check and schedule all
	  registered contacts at startup. (closes issue ASTERISK-23062)
	  Reported by: Rusty Newton Review:
	  https://reviewboard.asterisk.org/r/3124/ ........ Merged
	  revisions 405748 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/manager.c, /: manager: Originate doesn't abort on failed
	  format_cap allocation action_originate responds to the remote
	  system with an error when cap==NULL, but doesn't return (abort
	  the originate). Patched to return. (closes issue ASTERISK-23034)
	  Reported by: Corey Farrell Patches: ASTERISK-23034.patch uploaded
	  by coreyfarrell (license 5909) ........ Merged revisions 405745
	  from http://svn.asterisk.org/svn/asterisk/branches/11 ........
	  Merged revisions 405746 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-16 19:33 +0000 [r405744]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_pjsip.c: PJSIP: Fix outbound OPTIONS support When path
	  support was added and contacts were made available during request
	  creation and transmission, the code path used by outbound qualify
	  support was not modified correctly and was causing request
	  creation to fail. This ensures that outbound request creation
	  with only a contact and no dialog, endpoint, or uri can succeed
	  which restores qualify support. Reported by: gtjoseph Reported
	  by: kharwell ........ Merged revisions 405743 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-16 19:13 +0000 [r405644-405695]  Kevin Harwell <kharwell@digium.com>

	* /, res/res_fax.c, configs/res_fax.conf.sample: res_fax:
	  check_modem_rate() returned incorrect rate for V.27 According to
	  the new standard for V.27 and V.32 they are able to transmit at a
	  bit rate of 4,800 or 9,600. The check_mode_rate function needed
	  to be updated to reflect this. Also, because of this change the
	  default 'minrate' value was updated to be 4800. (closes issue
	  ASTERISK-22790) Reported by: Paolo Compagnini Patches:
	  res_fax.txt uploaded by looserouting (license 6548) ........
	  Merged revisions 405656 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 405693 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405694 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_pjsip.c: chan_pjsip: initial device state on
	  endpoints is INVALID When endpoints get loaded their device state
	  gets set to 'INVALID' because the channel driver has not been
	  loaded yet. Fixed by updating the device state for every endpoint
	  upon load of the channel driver. (closes issue ASTERISK-23065)
	  Reported by: Rusty Newton Review:
	  https://reviewboard.asterisk.org/r/3123/ ........ Merged
	  revisions 405643 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-15 16:51 +0000 [r405586-405589]  Jonathan Rose <jrose@digium.com>

	* CHANGES: Make 12 - 12.1 CHANGES log the same as in 12

	* CHANGES, /: Include CHANGES info for r405553 ........ Merged
	  revisions 405585 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-15 16:36 +0000 [r405584]  Joshua Colp <jcolp@digium.com>

	* /, cel/cel_manager.c: cel_manager: Don't crash if configuration
	  file is invalid. The cel_manager module did not properly handle
	  the case where the configuration file was invalid. The module
	  will now output a warning message and disable itself if this
	  occurs. Reported by: Bryan Walters ........ Merged revisions
	  405581 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 405582 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405583 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-15 13:16 +0000 [r405566]  Kinsey Moore <kmoore@digium.com>

	* res/res_pjsip/location.c, res/res_pjsip_outbound_registration.c,
	  res/res_pjsip_path.c (added), res/res_pjsip_mwi.c,
	  res/res_pjsip/pjsip_distributor.c, res/res_pjsip_diversion.c,
	  channels/chan_pjsip.c, res/res_pjsip_registrar.c,
	  res/res_pjsip_refer.c, include/asterisk/res_pjsip.h,
	  include/asterisk/res_pjsip_session.h, res/res_pjsip_notify.c, /,
	  res/res_pjsip_messaging.c, res/res_pjsip_caller_id.c,
	  res/res_pjsip_t38.c, res/res_pjsip.c,
	  res/res_pjsip/pjsip_options.c, res/res_pjsip_nat.c,
	  res/res_pjsip_session.c,
	  contrib/ast-db-manage/config/versions/2fc7930b41b3_add_pjsip_endpoint_options_for_12_1.py
	  (added), res/res_pjsip_header_funcs.c: PJSIP: Add Path header
	  support This adds Path support to chan_pjsip in res_pjsip_path.c
	  with minimal additions in res_pjsip_registrar.c to store the path
	  and additions in res_pjsip_outbound_registration.c to enable
	  advertisement of path support to registrars and intervening
	  proxies. Path information is stored on contacts and is enabled
	  via Address of Record (AoRs) and Registration configuration
	  sections. While adding path support, it became necessary to be
	  able to add SIP supplements that handled messages outside of
	  sessions, so a framework for handling these types of hooks was
	  added in parallel to the already-existing session supplements and
	  several senders of out-of-dialog requests were refactored as a
	  result. (closes issue ASTERISK-21084) Review:
	  https://reviewboard.asterisk.org/r/3050/ ........ Merged
	  revisions 405565 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-14 23:44 +0000 [r405554]  Jonathan Rose <jrose@digium.com>

	* res/res_stasis_mailbox.exports.in (added),
	  res/ari/ari_model_validators.h, rest-api/api-docs/mailboxes.json
	  (added), include/asterisk/stasis_app_mailbox.h (added),
	  res/ari/resource_mailboxes.c (added), /, res/ari.make,
	  res/res_ari_mailboxes.c (added), res/ari/resource_mailboxes.h
	  (added), res/res_stasis_mailbox.c (added),
	  rest-api/resources.json, res/ari/ari_model_validators.c: ARI: Add
	  mailboxes resource for controlling and polling external MWI Adds
	  the following AMI commands: PUT mailboxes/mailboxName modifies
	  mailbox state and implicitly creates new mailboxes GET
	  mailboxes/mailboxName retrieves a JSON representation of a single
	  mailbox if it exists GET mailboxes retrieves a JSON array of all
	  mailboxes DELETE mailbox/mailboxName deletes a mailbox Note that
	  res_mwi_external must be loaded for these functions to actually
	  do anything. Review: https://reviewboard.asterisk.org/r/3117/
	  ........ Merged revisions 405553 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-14 21:46 +0000 [r405542]  Richard Mudgett <rmudgett@digium.com>

	* main/strings.c, /: string container: Remove unnecessary RAII_VAR
	  usage and string object lock. ........ Merged revisions 405541
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-14 18:15 +0000 [r405437]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, channels/chan_sip.c: chan_sip: fix Local From tag on outbound
	  register regression In ASTERISK-12117, an improvement to insure
	  consistant local from tags on outbound registrations resulted in
	  an undesirable behavior - caused by leftover unexpired sip_pvt
	  dialogs (with the previous cseq number), resulting in many
	  uncessary REGISTER requests. Instead of significant rework of
	  transmit_register(), this change deletes the dialogs after a 200
	  OK response indiciating a successful registration, keeping the
	  old dialogs from interfering with normal operation. (closes issue
	  ASTERISK-22946) Reported by: Stephan Eisvogel Review:
	  https://reviewboard.asterisk.org/r/3109/ ........ Merged
	  revisions 405433 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 405434 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405435 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-14 18:14 +0000 [r405436]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_verbose.c, main/asterisk.c, configs/logger.conf.sample,
	  main/cli.c, include/asterisk/logger.h, main/pbx.c,
	  main/manager.c, /, funcs/func_timeout.c, apps/app_dumpchan.c,
	  main/logger.c, UPGRADE.txt: verbosity: Fix performance of console
	  verbose messages. The per console verbose level feature as
	  previously implemented caused a large performance penalty. The
	  fix required some minor incompatibilities if the new rasterisk is
	  used to connect to an earlier version. If the new rasterisk
	  connects to an older Asterisk version then the root console
	  verbose level is always affected by the "core set verbose"
	  command of the remote console even though it may appear to only
	  affect the current console. If an older version of rasterisk
	  connects to the new version then the "core set verbose" command
	  will have no effect. * Fixed the verbose performance by not
	  generating a verbose message if nothing is going to use it and
	  then filtered any generated verbose messages before actually
	  sending them to the remote consoles. * Split the "core set debug"
	  and "core set verbose" CLI commands to remove the per module
	  verbose support that cannot work with the per console verbose
	  level. * Added a silent option to the "core set verbose" command.
	  * Fixed "core set debug off" tab completion. * Made "core show
	  settings" list the current console verbosity in addition to the
	  root console verbosity. * Changed the default verbose level of
	  the 'verbose' setting in the logger.conf [logfiles] section. The
	  default is now to once again follow the current root console
	  level. As a result, using the AMI Command action with "core set
	  verbose" could again set the root console verbose level and
	  affect the verbose level logged. (closes issue AST-1252) Reported
	  by: Guenther Kelleter Review:
	  https://reviewboard.asterisk.org/r/3114/ ........ Merged
	  revisions 405431 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405432 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-14 16:43 +0000 [r405420]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip/pjsip_distributor.c: Fix erroneous behavior when
	  sending auth rejection to artificial endpoint. We were not
	  including an authentication challenge when sending a 401 response
	  to unmatched endpoints. This was due to the conversion to use a
	  vector for authentication section names on an endpoint. The
	  vector for artificial endpoints was empty, resulting in the
	  challenge being sent back containing no challenges. This is
	  worked around by placing a bogus value in the artificial
	  endpoint's auth vector. This value is never looked up by
	  anything, since they instead will directly call
	  ast_sip_get_artificial_auth().

2014-01-14 03:27 +0000 [r405369]  Damien Wedhorn <voip@facts.com.au>

	* /, channels/chan_skinny.c: Skinny: do not add call to missed
	  calls list if answered elsewhere. Patch updates skinny devices
	  with a SKINNY_CONNECTED callstate if an inbound ringing or
	  callwaiting call is answered elsewhere. ........ Merged revisions
	  405367 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-13 13:34 +0000 [r405339]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_pjsip/pjsip_cli.c: res_pjsip: Fix CLI tab completion
	  issues This fixes several issues with the new res_pjsip CLI tab
	  completion such as output of headers during tab completion and
	  being able to tab-complete more items than the code actually
	  handled (further items would simply be ignored). (closes issue
	  ASTERISK-23081) Review: https://reviewboard.asterisk.org/r/3115/
	  Reported by: xrobau ........ Merged revisions 405338 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-12 22:24 +0000 [r405326]  Joshua Colp <jcolp@digium.com>

	* res/ari/resource_playbacks.c, res/ari/resource_channels.c,
	  include/asterisk/ari.h, res/ari/resource_bridges.c,
	  res/ari/resource_recordings.c, res/ari/resource_device_states.c,
	  res/res_ari.c, res/ari/resource_endpoints.c, /,
	  res/ari/resource_applications.c: res_ari: Fix various memory
	  leaks. This change fixes a few memory leaks that were found based
	  on a mailing list post. 1. Some JSON response messages were never
	  freed. This was caused by the documentation stating that message
	  references were stolen when in reality they were not. The code
	  now follows the documentation and usage has been updated. 2. HTTP
	  response headers were never freed. 3. The variable list for
	  wildcards paths was never freed. (closes issue ASTERISK-23128)
	  Reported by: Kenneth Watson (on list) Review:
	  https://reviewboard.asterisk.org/r/3119/ ........ Merged
	  revisions 405325 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-12 22:13 +0000 [r405313-405314]  Matthew Jordan <mjordan@digium.com>

	* apps/app_forkcdr.c, /, funcs/func_cdr.c, include/asterisk/cdr.h,
	  apps/app_cdr.c, main/cdr.c: CDRs: Synchronize dialplan
	  applications that manipulate CDRs with the engine In
	  https://reviewboard.asterisk.org/r/3057/, applications and
	  functions that manipulate CDRs were made to interact over Stasis.
	  This was done to synchronize manipulations of CDRs from the
	  dialplan with the updates the engine itself receives over the
	  message bus. This change rested on a faulty premise: that
	  messages published to the CDR topic or to a topic that forwards
	  to the CDR topic are synchronized with the messages handled by
	  the CDR topic subscription in the CDR engine. This is not the
	  case. There is no ordering guaranteed for two messages published
	  to the same topic; ordering is only guaranteed if a message is
	  published to the same subscriber. Stasis was modified in r405311
	  to allow a publisher to synchronize on the subscriber. This patch
	  uses that API to synchronize the CDR publishers with the CDR
	  engine message router, which maintains the overall topic
	  subscription. (closes issue ASTERISK-22884) Reported by: Matt
	  Jordan Review: https://reviewboard.asterisk.org/r/3099/ ........
	  Merged revisions 405312 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis.c, main/stasis_message_router.c, /,
	  include/asterisk/stasis.h,
	  include/asterisk/stasis_message_router.h, tests/test_stasis.c:
	  stasis: Add methods to allow for synchronous publishing to
	  subscriber This patch adds an API call to Stasis that allows a
	  publisher to publish a stasis message that will not return until
	  a specific subscriber handles the message. Since a subscriber can
	  have their own forwarding topic which orders messages from many
	  topics, this allows a publisher who knows of that subscriber to
	  synchronize to that subscriber regardless of the forwarding
	  relationships between topics. This is of particular use for
	  dialplan applications that need to synchronize on a particular
	  subscriber's handling of a message. (issue ASTERISK-22884)
	  Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3099/ ........ Merged
	  revisions 405311 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-10 20:00 +0000 [r405299]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip/security_events.c: Print "<unknown>" for
	  artificial endpoint in PJSIP security events. Previously, this
	  printed a UUID, which was not very clear when dealing with an
	  artificial endpoint. Review:
	  https://reviewboard.asterisk.org/r/3113 ........ Merged revisions
	  405298 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-10 18:17 +0000 [r405284]  Richard Mudgett <rmudgett@digium.com>

	* /, main/logger.c: Logging callid: Fix some sizeof() references
	  per coding guidelines. ........ Merged revisions 405281 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405282 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-09 23:52 +0000 [r405270]  Jonathan Rose <jrose@digium.com>

	* res/res_pjsip_session.c: PJSIP: Add unhold on reinvite without
	  SDP behavior Review: https://reviewboard.asterisk.org/r/3106/

2014-01-09 23:50 +0000 [r405269]  Damien Wedhorn <voip@facts.com.au>

	* channels/chan_dahdi.c, /: Fix chan_dahdi copile issue in
	  dev-mode. Error "unused variable i in dahdi_create_channel_range"
	  when compiling in dev-mode. Small restructure to
	  dahdi_create_channel_range to move the for(x) loop and int i,x to
	  a block within the IFDEF. ........ Merged revisions 405268 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-09 23:39 +0000 [r405267]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip.c, /, res/res_pjsip_messaging.c:
	  res_pjsip_messaging: potential for field values in from/to
	  headers to be missing Added in ability to specify display name
	  format ("name" <sip:name@ipaddr:port>) for a given URI and made
	  sure it was fully propagated to the outgoing message. Also made
	  it so outoing messages in res_pjsip always send as "sip:".
	  (closes issue ASTERISK-22924) Reported by: Anthony Messina
	  Review: https://reviewboard.asterisk.org/r/3094/ ........ Merged
	  revisions 405266 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-09 20:34 +0000 [r405254]  Kinsey Moore <kmoore@digium.com>

	* main/astobj2.c, res/res_pjsip_session.c, /,
	  include/asterisk/astobj2.h: astobj2: Correct ao2_iterator opacity
	  violations This corrects the ao2_iterator opacity violations in
	  res_pjsip_session.c by adding a global function to get the number
	  of elements inside the container hidden behind the iterator.
	  (closes issue ASTERISK-23053) Review:
	  https://reviewboard.asterisk.org/r/3111/ Reported by: Richard
	  Mudgett ........ Merged revisions 405253 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-09 16:52 +0000 [r405236]  Kevin Harwell <kharwell@digium.com>

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Fails to resume
	  WebRTC call from hold In ast_rtp_ice_start if the ice session
	  create check list failed, start check was never initiated and
	  ice_started was never set to true. Upon re-entering the function
	  (for instance, [un]hold) it would try to create the check list
	  again with duplicate remote candidates. Fixed so that if the
	  create check list fails the necessary data structures are
	  properly re-initialized for any subsequent retries. Note, it was
	  decided to not stop ice support (by calling ast_rtp_ice_stop) on
	  a check list failure because it possible things might still work.
	  However, a debug message was added to help with any future
	  troubleshooting. (closes issue ASTERISK-22911) Reported by: Vytis
	  Valentinavičius Patches: works_on_my_machine.patch uploaded by
	  xytis (license 6558) ........ Merged revisions 405234 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405235 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-09 15:50 +0000 [r405217]  Matthew Jordan <mjordan@digium.com>

	* /, apps/app_confbridge.c,
	  apps/confbridge/conf_state_multi_marked.c: app_confbridge: Fix
	  crash caused when waitmarked/marked users leave together When
	  waitmarked users join a ConfBridge, the conference state is
	  transitioned from EMPTY -> INACTIVE. In this state, the users are
	  maintined in a waiting users list. When a marked user joins, the
	  ConfBridge conference transitions from INACTIVE -> MULTI_MARKED,
	  and all users are put onto the active list of users. This process
	  works correctly. When the marked user leaves, if they are the
	  last marked user, the MULTI_MARKED state does the following: (1)
	  It plays back a message to the bridge stating that the leader has
	  left the conference. This requires an unlocking of the bridge.
	  (2) It moves waitmarked users back to the waiting list (3) It
	  transitions to the appropriate state: in this case, INACTIVE
	  However, because it plays the prompt back to the bridge before
	  moving the users and before finishing the state transition, this
	  creates a race condition: with the bridge unlocked, waitmarked
	  users who leave the conference (or are kicked from it) can cause
	  a state transition of the bridge to another state before the
	  conference is transitioned to the INACTIVE state. This causes the
	  state machine to get a bit wonky, often leading to a crash when
	  the MULTI_MARKED state attempts to conclude its processing. This
	  patch fixes this problem: (1) It prevents kicked users from being
	  kicked again. That's just a nicety. (2) More importantly, it
	  fixes the race condition by only playing the prompt once the
	  state has transitioned correctly to INACTIVE. If waitmarked users
	  sneak out during the prompt being played, no harm no foul.
	  Review: https://reviewboard.asterisk.org/r/3108/ Note that the
	  patch committed here is essentially the same as uploaded by Simon
	  Moxon on ASTERISK-22740, with the addition of the double kick
	  prevention. (closes issue AST-1258) Reported by: Steve Pitts
	  (closes issue ASTERISK-22740) Reported by: Simon Moxon patches:
	  ASTERISK-22740.diff uploaded by Simon Moxon (license 6546)
	  ........ Merged revisions 405215 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405216 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-09 14:15 +0000 [r405163]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, apps/app_dumpchan.c: "Minimun" typo. ........ Merged revisions
	  405160 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 405161 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405162 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-08 17:23 +0000 [r405144]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip/security_events.c: Use proper case for checking
	  if digest authentication is used. ........ Merged revisions
	  405131 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-08 16:34 +0000 [r405129-405130]  Kinsey Moore <kmoore@digium.com>

	* /, configure, configure.ac, pbx/pbx_lua.c: pbx_lua: Add support
	  for Lua 5.2 This adds support for Lua 5.2 in pbx_lua which is
	  available on newer operating systems. (closes issue
	  ASTERISK-23011) Review: https://reviewboard.asterisk.org/r/3075/
	  Reported by: George Joseph Patch by: George Joseph ........
	  Merged revisions 405090 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 405091 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405124 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c: Add the missing part of r400140 When the
	  patch to add retry-on-forbidden-response was committed, part of
	  the patch for chan_sip was not committed which caused the feature
	  to be entirely nonfunctional. This corrects the code in question.
	  (closes issue ASTERISK-17138) Review:
	  https://reviewboard.asterisk.org/r/2874 ........ Merged revisions
	  405033 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 405081 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 405083 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-07 19:56 +0000 [r405020-405035]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip_acl.c: res_pjsip_acl: Fix another case of
	  assuming a contact will always contain a URI. ........ Merged
	  revisions 405034 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_nat.c: res_pjsip_nat: Don't assume a Contact
	  header will always contain a URI. If the 'rewrite_contact' option
	  was enabled and a Contact header was received which contained a
	  '*' a crash would occur. This change makes the res_pjsip_nat
	  module ignore the Contact header if it contains only a '*'.
	  (closes issue ASTERISK-23101) Reported by: Matt Jordan ........
	  Merged revisions 405019 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-06 21:55 +0000 [r404953-405007]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_voicemail.c, /: app_voicemail: Explicitly set
	  defaultenabled=yes ........ Merged revisions 405006 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_mwi_external_ami.c (added): External MWI AMI support.
	  The external MWI AMI interface provides a thin wrapper around the
	  core external MWI resource. The resource adds the following AMI
	  actions: MWIGet, MWIDelete, and MWIUpdate. (closes issue AFS-46)
	  Review: https://reviewboard.asterisk.org/r/3061/ ........ Merged
	  revisions 404954 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_mwi_external.c (added), configs/sorcery.conf.sample,
	  include/asterisk/res_mwi_external.h (added),
	  res/res_mwi_external.exports.in (added), apps/app_voicemail.c:
	  External MWI core support. * The core external MWI resource
	  provides for MWI message counts persistence using sorcery. With
	  sorcery, the user is able to configure which sorcery wizzard
	  backend to use if the default astdb is not desired. * The core
	  external MWI resoruce provides some debugging CLI commands
	  enabled by defining MWI_DEBUG_CLI. The debugging CLI commands
	  are: "mwi delete all", "mwi delete like <regex>", "mwi delete
	  mailbox <mailbox>", "mwi list all", "mwi list like <regex>", "mwi
	  show mailbox <mailbox>", and "mwi update mailbox <mailbox> [<new>
	  [<old>]]". (closes issue AFS-43) Review:
	  https://reviewboard.asterisk.org/r/3061/ ........ Merged
	  revisions 404952 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-05 16:01 +0000 [r404924-404936]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip_outbound_registration.c:
	  res_pjsip_outbound_registration: Don't assume that a registration
	  client will always exist. ........ Merged revisions 404935 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_outbound_registration.c:
	  res_pjsip_outbound_registration: Create registration client in pj
	  thread. Depending on which threading was loading the outbound
	  registration it was possible for the registration client to be
	  allocated outside of a pj thread. This change moves the creation
	  inside the synchronous task where it is guaranteed it will occur
	  in a pj thread. Reported by: Rob Thomas ........ Merged revisions
	  404923 from http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-04 10:52 +0000 [r404912]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* main/asterisk.c, /: asterisk.c: suppress live_dangerously warning
	  on rasterisk Even since the fixes of AST-2013-007, Asterisk
	  prints the following warning on startup if the user decided to
	  live dangerously: Privilege escalation protection disabled! See
	  https://wiki.asterisk.org/wiki/x/1gKfAQ for more details. This
	  message is intended for the logs and interactive startup. No need
	  for it to appear on a remote console. This commit removes it from
	  there. (closes issue ASTERISK-23084) Review:
	  https://reviewboard.asterisk.org/r/3101/ ........ Merged
	  revisions 404861 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 404888 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404911 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-03 22:00 +0000 [r404860]  Kevin Harwell <kharwell@digium.com>

	* cel/cel_pgsql.c, /: cel_pgsql: module not correctly reloading
	  Upon reload the module unconditionally "unloaded" the module
	  (freeing memory and setting pointers to NULL) and then when
	  attempting a "load" if the config file had not changed then
	  nothing would be reinitialized. By moving the "unload" to occur
	  conditionally (reload only) after an attempted configuration
	  load, but before module "loading" alleviates the issue. The
	  module now loads/unloads/reloads correctly. (closes issue
	  ASTERISK-22871) Reported by: Matteo ........ Merged revisions
	  404857 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 404858 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404859 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-03 21:45 +0000 [r404844-404856]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_pjsip_logger.c: res_pjsip_logger: Add the
	  ASTERISK_FILE_VERSION macro Registering yourself with the
	  Asterisk core is the nice thing to do, even when you're a logging
	  module. ........ Merged revisions 404855 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_authenticator_digest.c, tests/test_utils.c:
	  res_pjsip_authenticator_digest: Fix md5 hash buffer An md5 hash
	  is 32 bytes long. The char buffer must be at least 33 bytes to
	  avoid clobbering of the stack. This patch also fixes a potential
	  clobbering in test_utils.c. Thanks to Andrew Nagy for reporting
	  and testing this out in #asterisk-dev Reported by: Andrew Nagy
	  Tested by: Andrew Nagy ........ Merged revisions 404843 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-03 20:02 +0000 [r404787-404832]  Kevin Harwell <kharwell@digium.com>

	* main/manager.c: manager: UserEvent including action on output AMI
	  action UserEvent event response would include the action header
	  in its keyvalue pairs list. Adjusted the start of the header loop
	  to skip over the action part. (closes issue ASTERISK-22899)
	  Reported by: outtolunc Patches:
	  svn_manager.c.skip_action.diff.txt uploaded by outtolunc (license
	  5198)

	* channels/chan_dahdi.c, /: chan_dahdi: dahdi show channels slices
	  PRI channel dnid on output dahdi show channels output slices the
	  callerid (which is dnid copied over on PRI channels). If the
	  channel naming structures look like: 'DAHDI/i1/1408409XXXX-6'
	  then the output slices 1408409XXXX down to 1408409XXX. This patch
	  just opens it up to 15 chars so you can see the whole thing.
	  (closes issue ASTERISK-22918) Reported by: outtolunc Patches:
	  svn_chan_dahdi.c.format12_15.diff.txt uploaded by outtolunc
	  (license 5198) ........ Merged revisions 404784 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 404785 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404786 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-03 18:33 +0000 [r404783]  Richard Mudgett <rmudgett@digium.com>

	* tests/test_stasis.c, /: test_stasis.c: Fix ref leak in normal
	  execution path. ........ Merged revisions 404764 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-03 18:31 +0000 [r404782]  Kevin Harwell <kharwell@digium.com>

	* /, apps/app_meetme.c: app_meetme: compiler warning Fixed a
	  compiler warning (errors in 'dev-mode') given by gcc version
	  4.8.1. The one in app_meetme involved the
	  'sizeof-pointer-memaccess' (see:
	  http://gcc.gnu.org/gcc-4.8/porting_to.html) warning. Fixed so it
	  would no longer issue a warning and can compile again in
	  'dev-mode'. Review: https://reviewboard.asterisk.org/r/3098/
	  ........ Merged revisions 404742 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 404773 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404781 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-03 17:27 +0000 [r404726-404738]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip/pjsip_configuration.c, /, res/res_pjsip/location.c:
	  res_pjsip: Ensure more URI validation happens in pj threads.
	  ........ Merged revisions 404737 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_outbound_registration.c:
	  res_pjsip_outbound_registration: Ensure URI validation happens in
	  a pjlib thread. This change moves outbound registration URI
	  validation into the task executed within a pjlib thread. Reported
	  by: Andrew Nagy ........ Merged revisions 404725 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-02 19:38 +0000 [r404677]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, funcs/func_strings.c: func_strings: use memmove to prevent
	  overlapping memory on strcpy When calling REPLACE() with an empty
	  replace-char argument, strcpy is used to overwrite the the
	  matching <find-char>. However as the src and dest arguments to
	  strcpy must not overlap, it causes other parts of the string to
	  be overwritten with adjacent characters and the result is
	  mangled. Patch replaces call to strcpy with memmove and adds a
	  test suite case for REPLACE. (closes issue ASTERISK-22910)
	  Reported by: Gareth Palmer Review:
	  https://reviewboard.asterisk.org/r/3083/ Patches:
	  func_strings.patch uploaded by Gareth Palmer (license 5169)
	  ........ Merged revisions 404674 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 404675 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404676 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2014-01-02 19:08 +0000 [r404664]  Kevin Harwell <kharwell@digium.com>

	* channels/chan_pjsip.c, include/asterisk/res_pjsip.h, /,
	  configs/pjsip.conf.sample, res/res_pjsip/pjsip_configuration.c,
	  CHANGES, res/res_pjsip.c: res_pjsip: add 'set_var' support on
	  endpoints Added a new 'set_var' option for ast_sip_endpoint(s).
	  For each variable specified that variable gets set upon creation
	  of a pjsip channel involving the endpoint. (closes issue
	  ASTERISK-22868) Reported by: Joshua Colp Review:
	  https://reviewboard.asterisk.org/r/3095/ ........ Merged
	  revisions 404663 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-31 22:51 +0000 [r404620-404653]  Joshua Colp <jcolp@digium.com>

	* channels/chan_pjsip.c, res/res_pjsip_session.c, /: chan_pjsip:
	  Handle hanging up before calling. Channel creation in Asterisk is
	  broken up into two steps: requesting and calling. In some cases a
	  channel may be requested but never called. This happens in the
	  ChanIsAvail dialplan application for determining if something is
	  reachable or not. The PJSIP channel driver did not take this
	  situation into account and attempted to end a session that was
	  never called out on. The code now checks the session state to
	  determine if the session has been called out on and if not
	  terminates it instead of ending it. (closes issue ASTERISK-23074)
	  Reported by: Kilburn ........ Merged revisions 404652 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_endpoint_identifier_ip.c:
	  res_pjsip_endpoint_identifier_ip: Accept hostnames in the 'match'
	  field. Hostnames specified in the 'match' field will be resolved
	  and all addresses returned. Each address will be added to the
	  endpoint identifier for the matching process. Reported by: Rob
	  Thomas ........ Merged revisions 404613 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-31 21:39 +0000 [r404606]  Kevin Harwell <kharwell@digium.com>

	* cel/cel_pgsql.c, /: cel_pgsql: deadlock on unload and
	  core_event_dispatcher A deadlock can happen between a thread
	  unloading or reloading the cel_pgsql module and the
	  core_event_dispatcher taskprocessor thread. Description of what
	  is happening: Thread 1 (for example, a netconsole thread): a
	  "module reload cel_pgsql" is launched the thread enter the
	  "my_unload_module" function (cel_pgsql.c) the thread acquire the
	  write lock on psql_columns the thread enter the
	  "ast_event_unsubscribe" function (event.c) the thread try to
	  acquire the write lock on ast_event_subs[sub->type] Thread 2
	  (core_event_dispatcher taskprocessor thread): the taskprocessor
	  pop a CEL event the thread enter the "handle_event" function
	  (event.c) the thread acquire the read lock on
	  ast_event_subs[sub->type] the thread callback the "pgsql_log"
	  function (cel_pgsql.c), since it's a subscriber of CEL events the
	  thread try to acquire a read lock on psql_columns (closes issue
	  ASTERISK-22854) Reported by: Etienne Lessard Patches:
	  cel_pgsql_fix_deadlock_event.patch uploaded by hexanol (license
	  6394) ........ Merged revisions 404603 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 404604 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404605 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-31 20:27 +0000 [r404593]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_outbound_registration.c, /:
	  res_pjsip_outbound_registration: Add validation for 'server_uri'
	  and 'client_uri'. When applying configuration for outbound
	  registrations the 'server_uri' and 'client_uri' fields were not
	  validated. The code will now confirm that they exist and that
	  they contain parseable SIP URIs. Reported by: Andrew Nagy
	  ........ Merged revisions 404592 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-30 23:25 +0000 [r404582]  Kevin Harwell <kharwell@digium.com>

	* main/channel.c, /: channels.c: core show channeltypes slicing
	  'core show channeltypes' type column is being sliced, resulting
	  in incomplete type names. (closes issue ASTERISK-22919) Reported
	  by: outtolunc Patches: svn_channel.c.format_15.diff.txt uploaded
	  by outtolunc (license 5198) ........ Merged revisions 404579 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404581 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-24 17:12 +0000 [r404567-404569]  David M. Lee <dlee@digium.com>

	* UPGRADE-12.txt, /: Added note to UPGRADE.txt about the default
	  value of live_dangerously changing ........ Merged revisions
	  404568 from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/http.c: http: Properly reject requests with
	  Transfer-Encoding set Asterisk does not support any of the
	  transfer encodings specified in HTTP/1.1, other than the default
	  "identity" encoding. According to RFC 2616: A server which
	  receives an entity-body with a transfer-coding it does not
	  understand SHOULD return 501 (Unimplemented), and close the
	  connection. A server MUST NOT send transfer-codings to an
	  HTTP/1.0 client. This patch adds the 501 Unimplemented response,
	  instead of the hard work of actually implementing other
	  recordings. This behavior is especially problematic for Node.js
	  clients, which use chunked encoding by default. (closes issue
	  ASTERISK-22486) Review: https://reviewboard.asterisk.org/r/3092/
	  ........ Merged revisions 404565 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-24 02:20 +0000 [r404554]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip_pubsub.c: res_pjsip_pubsub: Ensure dialog
	  manipulation happens on proper thread. When destroying a
	  subscription we remove the serializer from its dialog and
	  decrease its reference count. Depending on which thread dropped
	  the subscription reference count to 0 it was possible for this to
	  occur in a thread where it is not possible. (closes issue
	  ASTERISK-22952) Reported by: Matt Jordan ........ Merged
	  revisions 404553 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-23 16:38 +0000 [r404542]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* channels/chan_dahdi.c, configs/chan_dahdi.conf.sample,
	  UPGRADE-12.txt: chan_dahdi: enable ignore_failed_channels by
	  default If ignore_failed_channels is set to "true" for a channel,
	  the channel will continue to be configured even if configuring it
	  has failed. This allows Asterisk to start before all the DAHDI
	  initialization is done and thus not force the starting order
	  dahdi -> asterisk. Review:
	  https://reviewboard.asterisk.org/r/3063/

2013-12-21 03:35 +0000 [r404532]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_pjsip/pjsip_cli.c: res_pjsip/pjsip_cli: fix
	  compilation error caused by passing ast_free When wanting to pass
	  *free as a function pointer, ast_free_ptr has to be used instead
	  of ast_free. This allows it to be compiled with MALLOC_DEBUG
	  enabled. ........ Merged revisions 404531 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-20 22:04 +0000 [r404511-404512]  David M. Lee <dlee@digium.com>

	* rest-api/api-docs/channels.json, res/ari/resource_channels.c,
	  res/res_ari_channels.c, res/ari/resource_channels.h, /,
	  rest-api/api-docs/applications.json: ari: Remove support for
	  specifying channel vars during origination. When we added support
	  for specifying channel variables for an origination, we didn't
	  consider how that would interact with another feature, namely
	  specifying request parameters in a JSON request body. The method
	  of specifying channel variables (as a flat JSON object passed in
	  the JSON body) interferes with parsing parameters out of the
	  request body. Unfortunately, fixing this would be a backward
	  incompatible change. In the interest of keeping the API sane and
	  keeping our release schedule, we're dropping the feature for
	  specifying channel variables in the origination request. We will
	  bring the feature back soon, as a backward compatible addition to
	  the API. (closes issue ASTERISK-23051) Review:
	  https://reviewboard.asterisk.org/r/3088 ........ Merged revisions
	  404509 from http://svn.asterisk.org/svn/asterisk/branches/12

	* /: Remove automerge properties ........ Merged revisions 404488
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-20 21:32 +0000 [r404507]  Matthew Jordan <mjordan@digium.com>

	* include/asterisk/config.h, main/config.c, main/channel.c,
	  res/res_pjsip/location.c, include/asterisk/res_pjsip_cli.h
	  (added), res/res_pjsip/pjsip_cli.c (added),
	  include/asterisk/sorcery.h, res/res_pjsip/pjsip_configuration.c,
	  res/res_pjsip/include/res_pjsip_private.h,
	  res/res_pjsip_registrar.c, main/sorcery.c,
	  include/asterisk/res_pjsip.h, CREDITS,
	  res/res_pjsip/config_auth.c, /,
	  res/res_pjsip_endpoint_identifier_ip.c: res_pjsip: Add PJSIP CLI
	  commands Implements the following cli commands: pjsip list aors
	  pjsip list auths pjsip list channels pjsip list contacts pjsip
	  list endpoints pjsip show aor(s) pjsip show auth(s) pjsip show
	  channels pjsip show endpoint(s) Also... Minor modifications made
	  to the AMI command implementations to facilitate reuse. New
	  function ast_variable_list_sort added to config.c and config.h to
	  implement variable list sorting. (issue ASTERISK-22610) patches:
	  pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
	  ........ Merged revisions 404480 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-20 21:18 +0000 [r404461]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, main/say.c: say.c: correct time for polish In
	  ast_say_date_with_format_pl(), change ast_say_number() to use
	  tm_sec instead of tm_mn. (closes issue ASTERISK-22856) Reported
	  by: Robert Mordec Review:
	  https://reviewboard.asterisk.org/r/3082/ Patches: say.c.patch
	  uploaded by veilen (license 6555) ........ Merged revisions
	  404456 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 404457 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404458 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-20 20:28 +0000 [r404452]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip_refer.c: Fix issue where PJSIP blind transferer
	  dialog may not complete as planned. When transferring to a
	  dialplan extension that will not place any outbound calls, the
	  only control frames that the PJSIP REFER framehook will receive
	  are inconsequential (such as unhold or srcchange). As such, we
	  shouldn't allow for the reception of those types of frames
	  prevent us from signaling to the transferring party that the
	  transfer has completed successfully once voice frames are read.
	  Thanks to Jonathan Rose for pointing this out. ........ Merged
	  revisions 404439 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-20 20:05 +0000 [r404438]  Matthew Jordan <mjordan@digium.com>

	* /, res/ari/resource_applications.h,
	  res/res_stasis_device_state.c: res_stasis_device_state: Set
	  resource type for subscriptions to deviceState The documentation
	  for ARI already specifies that the device state resource when
	  used for subscribing for events is "deviceState", not
	  "device_state". The code, however, used "device_state"; although
	  this was inconsistent as well in doxygen comments in
	  resource_applications. Because the actual resource being
	  subscribed to is /deviceStates/{device}/, it makes sense for the
	  resource type specifier to be deviceState. Note that the key
	  value in the events is still "device_state". ........ Merged
	  revisions 404437 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-20 20:00 +0000 [r404436]  Richard Mudgett <rmudgett@digium.com>

	* res/ari/resource_channels.c, tests/test_scoped_lock.c,
	  tests/test_stasis.c, res/parking/parking_manager.c,
	  res/ari/resource_bridges.c, res/ari/resource_endpoints.c, /,
	  res/res_pjsip/location.c, tests/test_cel.c: ao2_iterator:
	  Mini-audit of the ao2_iterator loops in the new code files. *
	  Fixed several places where ao2_iterator_destroy() was not called.
	  * Fixed several iterator loop object variable reference problems.
	  * Fixed res_parking AMI actions returning non-zero. Only the AMI
	  logoff action can return non-zero. Review:
	  https://reviewboard.asterisk.org/r/3087/ ........ Merged
	  revisions 404434 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-20 19:25 +0000 [r404433]  Matthew Jordan <mjordan@digium.com>

	* include/asterisk/manager.h, /: manager: bump version to 2.0.0 AMI
	  has received substantial updates over the past year. Not only has
	  the syntax been vastly improved and made consistent (which
	  entails many event changes), but the underlying things that those
	  events convey have changed substantially as well. After some
	  conversation in #asterisk-dev, it was agreed that this is a good
	  time to jump to 2. At the same time, since ARI will most likely
	  use semantic versioning, we might as well use that for AMI as
	  well. That also affords us greater meaning for the AMI version.
	  ........ Merged revisions 404421 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-20 19:06 +0000 [r404420]  Richard Mudgett <rmudgett@digium.com>

	* /, main/sounds_index.c: Whitespace fixes. ........ Merged
	  revisions 404419 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-20 17:22 +0000 [r404406]  Rusty Newton <rnewton@digium.com>

	* /, configs/pjsip.conf.sample: Documentation: Updates for info
	  about NAT-related settings and fixes for pjsip.conf.sample Added
	  another NAT example to pjsip.conf.sample. We had a few mentions
	  of NAT configuration throughout the sample, but I added another
	  for a little bit more clarity. Additionally many pjsip options
	  were affected by the change to snake case, so I fixed any
	  instances of those options in pjsip.conf. I regenerated the
	  config option list (at the bottom of the file) from a new xml
	  config doc dump, so all the snake case changes should be
	  reflected there, as well as any other changes to those options.
	  (issue ASTERISK-23004) (closes issue ASTERISK-23004) Reported by:
	  Matt Jordan Review: https://reviewboard.asterisk.org/r/3086/
	  ........ Merged revisions 404405 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 20:48 +0000 [r404387]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/security_events.c: security_events: log events with
	  descriptive names This patch updates the log messages to include
	  descriptive names for event types. This is an improvement over
	  having only cryptic type numbers. (closes issue ASTERISK-22909)
	  Reported by: outtolunc Review:
	  https://reviewboard.asterisk.org/r/3081/ Patches:
	  svn_security_events.c.names.diff.txt uploaded by outtolunc
	  (license 5198)

2013-12-19 18:16 +0000 [r404376]  Richard Mudgett <rmudgett@digium.com>

	* /, CHANGES: Put notice in CHANGES as well as UPGRADE.txt.
	  ........ Merged revisions 404375 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 18:00 +0000 [r404370-404372]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip/pjsip_outbound_auth.c, /: res_pjsip: Ignore 401/407
	  responses for transactions and dialogs we don't know about. Under
	  normal conditions it is unlikely we will ever receive a response
	  for a transaction or dialog we don't know about but if any are
	  received ignore them. ........ Merged revisions 404371 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_session.c: res_pjsip_session: Fix SDP
	  negotiation when resending an INVITE with authentication. The
	  process for resending an INVITE with authentication involves
	  restarting the UAC session. We were incorrectly passing in that a
	  new offer is being sent, causing the SDP negotiation to get into
	  a (technically speaking) funky state. ........ Merged revisions
	  404369 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 17:45 +0000 [r404368]  Mark Michelson <mmichelson@digium.com>

	* include/asterisk/channel.h, res/res_pjsip.c, main/channel.c, /,
	  include/asterisk/autochan.h: Fix a deadlock that occurred due to
	  a conflict of masquerades. For the explanation, here is a
	  copy-paste of the review board explanation: Initially, it was
	  discovered that performing an attended transfer of a multiparty
	  bridge with a PJSIP channel would cause a deadlock. A PBX thread
	  started a masquerade and reached the point where it was calling
	  the fixup() callback on the "original" channel. For chan_pjsip,
	  this involves pushing a synchronous task to the session's
	  serializer. The problem was that a task ahead of the fixup task
	  was also attempting to perform a channel masquerade. However,
	  since masquerades are designed in a way to only allow for one to
	  occur at a time, the task ahead of the fixup could not continue
	  until the masquerade already in progress had completed. And of
	  course, the masquerade in progress could not complete until the
	  task ahead of the fixup task had completed. Deadlock. The initial
	  fix was to change the fixup task to be asynchronous. While this
	  prevented the deadlock from occurring, it had the frightful side
	  effect of potentially allowing for tasks in the session's
	  serializer to operate on a zombie channel. Taking a step back
	  from this particular deadlock, it became clear that the problem
	  was not really this one particular issue but that masquerades
	  themselves needed to be addressed. A PJSIP attended transfer
	  operation calls ast_channel_move(), which attempts to both set up
	  and execute a masquerade. The problem was that after it had set
	  up the masquerade, the PBX thread had swooped in and tried to
	  actually perform the masquerade. Looking at changes that had been
	  made to Asterisk 12, it became clear that there never is any time
	  now that anyone ever wants to set up a masquerade and allow for
	  the channel thread to actually perform the masquerade. Everyone
	  always is calling ast_channel_move(), performs the masquerade
	  itself before returning. In this patch, I have removed all blocks
	  of code from channel.c that will attempt to perform a masquerade
	  if ast_channel_masq() returns true. Now, there is no distinction
	  between setting up a masquerade and performing the masquerade. It
	  is one operation. The only remaining checks for
	  ast_channel_masq() and ast_channel_masqr() are in ast_hangup()
	  since we do not want to interrupt a masquerade by hanging up the
	  channel. Instead, now ast_hangup() will wait for a masquerade to
	  complete before moving forward with its operation. The
	  ast_channel_move() function has been modified to basically
	  in-line the logic that used to be in ast_channel_masquerade().
	  ast_channel_masquerade() has been killed off for real.
	  ast_channel_move() now has a lock associated with it that is used
	  to prevent any simultaneous moves from occurring at once. This
	  means there is no need to make sure that ast_channel_masq() or
	  ast_channel_masqr() are already set on a channel when
	  ast_channel_move() is called. It also means the channel container
	  lock is not pulling double duty by both keeping the container
	  locked and preventing multiple masquerades from occurring
	  simultaneously. The ast_do_masquerade() function has been renamed
	  to do_channel_masquerade() and is now internal to channel.c. The
	  function now takes explicit arguments of which channels are
	  involved in the masquerade instead of a single channel. While it
	  probably is possible to do some further refactoring of this
	  method, I feel that I would be treading dangerously. Instead, all
	  I did was change some comments that no longer are true after this
	  changeset. The other more minor change introduced in this patch
	  is to res_pjsip.c to make ast_sip_push_task_synchronous() run the
	  task in-place if we are already a SIP servant thread. This is
	  related to this patch because even when we isolate the channel
	  masquerade to only running in the SIP servant thread, we would
	  still deadlock when the fixup() callback is reached since we
	  would essentially be waiting forever for ourselves to finish
	  before actually running the fixup. This makes it so the fixup is
	  run without having to push a task into a serializer at all.
	  (closes issue ASTERISK-22936) Reported by Jonathan Rose Review:
	  https://reviewboard.asterisk.org/r/3069 ........ Merged revisions
	  404356 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 17:13 +0000 [r404355]  Richard Mudgett <rmudgett@digium.com>

	* main/udptl.c, addons/chan_ooh323.c, /, channels/chan_sip.c,
	  include/asterisk/udptl.h: udptl: Dead code elimination.
	  ast_udptl_bridge was not used. Removing dead code starting with
	  ast_udptl_bridge() eliminated the code in this change. Note: This
	  code has actually been dead since Asterisk v1.4 when it was first
	  put in. Review: https://reviewboard.asterisk.org/r/3079/ ........
	  Merged revisions 404354 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 17:03 +0000 [r404353]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, res/res_fax.c: res_fax.c: crash on framehook with no dsp in
	  fax detect In fax_detect_framehook() a null pointer reference can
	  occur where a voice frame is processed but no dsp is attached to
	  the fax detection structure. The code block that rejects frames
	  that detection cannot be processed on is checking for dsp but
	  falls through when it should instead return, as this change
	  implements. (closes issue ASTERISK-22942) Reported by: adomjan
	  Review: https://reviewboard.asterisk.org/r/3076/ ........ Merged
	  revisions 404351 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404352 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 16:52 +0000 [r404350]  Richard Mudgett <rmudgett@digium.com>

	* configs/skinny.conf.sample, res/res_xmpp.c, res/res_jabber.c,
	  CHANGES, channels/chan_iax2.c, channels/sig_pri.c,
	  channels/h323/chan_h323.h, configs/iax.conf.sample,
	  channels/sig_pri.h, channels/chan_dahdi.c,
	  include/asterisk/app.h, channels/chan_skinny.c,
	  channels/chan_dahdi.h, channels/chan_h323.c, main/app.c,
	  UPGRADE-12.txt, configs/sip.conf.sample,
	  channels/sip/include/sip.h, channels/chan_mgcp.c,
	  apps/app_voicemail.c, channels/chan_unistim.c,
	  configs/chan_dahdi.conf.sample, /, channels/chan_sip.c,
	  configs/voicemail.conf.sample, funcs/func_vmcount.c: Voicemail:
	  Remove mailbox identifier format (box@context) assumptions in the
	  system. This change is in preparation for external MWI support.
	  Removed code from the system for normal mailbox handling that
	  appends @default to the mailbox identifier if it does not have a
	  context. The only exception is the legacy hasvoicemail users.conf
	  option. The legacy option will only work for app_voicemail
	  mailboxes. The system cannot make any assumptions about the
	  format of the mailbox identifer used by app_voicemail. chan_sip
	  and chan_dahdi/sig_pri had the most changes because they both
	  tried to interpret the mailbox identifier. chan_sip just stored
	  and compared the two components. chan_dahdi actually used the box
	  information. The ISDN MWI support configuration options had to be
	  reworked because chan_dahdi was parsing the box@context format to
	  get the box number. As a result the mwi_vm_boxes chan_dahdi.conf
	  option was added and is documented in the chan_dahdi.conf.sample
	  file. Review: https://reviewboard.asterisk.org/r/3072/ ........
	  Merged revisions 404348 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 16:33 +0000 [r404346]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/db.c, /: astdb: crash in sqlite3 during shutdown When
	  Asterisk is shut down, the astdb_atexit() function releases
	  (finalize) the previously initiated (prepared) SQL statements in
	  sqlite3. Another thread making a subsequent request can cause a
	  crash in sqlite3. This patch eliminates that issue by resetting
	  the statement pointer after it is released/cleared. The sqlite3
	  code detects the null pointer, and aborts the operation cleanly.
	  (closes issue AST-1265) Reported by: Alexander Hömig (closes
	  issue ASTERISK-22350) Reported by: Birger "WIMPy" Harzenetter
	  Review: https://reviewboard.asterisk.org/r/3078/ ........ Merged
	  revisions 404344 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404345 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 12:18 +0000 [r404333]  Joshua Colp <jcolp@digium.com>

	* main/channel.c, /: channel: Add a missing ast_channel_unlock when
	  allocating a Surrogate channel. ........ Merged revisions 404332
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 08:35 +0000 [r404321]  Alexandr Anikin <may@telecom-service.ru>

	* addons/ooh323c/src/oochannels.c, addons/ooh323c/src/ooGkClient.c,
	  addons/chan_ooh323.c, /, addons/ooh323c/src/ooGkClient.h: Handle
	  temporary failures on gk registration Introduce new 'stopped'
	  state for gk client and restart gk client on failures Remove
	  ooh323 stack command lock as it is not need now. (closes issue
	  ASTERISK-21960) Reported by: Dmitry Melekhov Patches:
	  ASTERISK-21960.patch ASTERISK-21960-stacklockup-2.patch Tested
	  by: Dmitry Melekhov ........ Merged revisions 404318 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404320 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 02:59 +0000 [r404307]  Damien Wedhorn <voip@facts.com.au>

	* /, channels/chan_skinny.c: Fixup some skinny bugs causing Fracks
	  and ao2 cleanup issues. Moved channel locking into setsubstate so
	  that a process can complete working on a sub before another
	  starts changing it. The existing code was causing some Fracks
	  with schedule deletion. Removed multiple rtp cleanup. Now only
	  cleansup up once, fixing ao2 object cleanup issues. ........
	  Merged revisions 404306 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 00:50 +0000 [r404295]  Matthew Jordan <mjordan@digium.com>

	* include/asterisk/cdr.h, CHANGES, apps/app_cdr.c, main/cdr.c,
	  apps/app_forkcdr.c, main/pbx.c, /, funcs/func_cdr.c,
	  apps/app_disa.c, UPGRADE-12.txt: app_cdr,app_forkcdr,func_cdr:
	  Synchronize with engine when manipulating state When doing the
	  rework of the CDR engine that pushed all of the logic into cdr.c
	  and made it respond to changes in channel state over Stasis, we
	  knew that accessing the CDR engine from the dialplan would be
	  "slightly" non-deterministic. Dialplan threads would be accessing
	  CDRs while Stasis threads would be updating the state of said
	  CDRs - whereas in the past, everything happened on the dialplan
	  threads. Tests have shown that "slightly" is in reality "very".
	  This patch synchronizes things by making the dialplan
	  applications/functions that manipulate CDRs do so over Stasis.
	  ForkCDR, NoCDR, ResetCDR, CDR, and CDR_PROP now all use Stasis to
	  send their requests over to the CDR engine, and synchronize on
	  the channel Stasis topic via a subscription so that they return
	  their values/control to the dialplan at the appropriate time.
	  While going through this, the following changes were also made: *
	  DISA, which can reset the CDR when a user successfully
	  authenticates, now just uses the ResetCDR app to do this. This
	  prevents having to duplicate the same Stasis synchronization
	  logic in that application. * Answer no longer disables CDRs. It
	  actually didn't work anyway - calling DISABLE on the channel's
	  CDR doesn't stop the CDR from getting the Answer time - it just
	  kills all CDRs on that channel, which isn't what the caller would
	  intend. (closes issue ASTERISK-22884) (closes issue
	  ASTERISK-22886) Review: https://reviewboard.asterisk.org/r/3057/
	  ........ Merged revisions 404294 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-19 00:32 +0000 [r404293]  Damien Wedhorn <voip@facts.com.au>

	* /, channels/chan_skinny.c: Fixup skinny registration following
	  network issues. On session registration, if device is already
	  reporting that it is connected to a device, an innocuous packet
	  (update time) is sent to the already connected device. If the tcp
	  connection is down, the device will be unregistered and the new
	  connection allowed. Without this patch, network issues can see a
	  situation where a device can not reregister until after
	  3*timeout. ........ Merged revisions 404292 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-18 23:00 +0000 [r404280]  Jason Parker <jparker@digium.com>

	* main/manager.c, /: Add AMI event for presence state. Review:
	  https://reviewboard.asterisk.org/r/3039/ ........ Merged
	  revisions 404275 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404279 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-18 21:12 +0000 [r404264]  Richard Mudgett <rmudgett@digium.com>

	* addons/ooh323c/src/ooTimer.c, /: ooh323c: Fix gcc 4.6.3 compiler
	  warnings. ........ Merged revisions 404212 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 404219 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404263 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-18 20:48 +0000 [r404260-404262]  Kevin Harwell <kharwell@digium.com>

	* channels/chan_oss.c, /: chan_oss.c: channel being locked twice
	  and unlocked once Removed channel lock as it is now being down in
	  ast_channel_alloc ........ Merged revisions 404261 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* pbx/pbx_realtime.c, channels/chan_alsa.c, main/stasis_channels.c,
	  addons/chan_mobile.c, main/bridge_channel.c, tests/test_cdr.c,
	  channels/chan_pjsip.c, res/parking/parking_manager.c,
	  channels/chan_mgcp.c, channels/chan_unistim.c, main/pbx.c,
	  funcs/func_timeout.c, /, apps/app_meetme.c, main/bridge.c,
	  tests/test_stasis_channels.c, include/asterisk/channel.h,
	  channels/chan_gtalk.c, channels/sig_pri.c, apps/app_queue.c,
	  main/cel.c, main/stasis_bridges.c, channels/chan_jingle.c,
	  channels/chan_phone.c, channels/chan_dahdi.c, main/dial.c,
	  channels/sig_analog.c, include/asterisk/stasis_channels.h,
	  res/res_agi.c, channels/chan_motif.c, tests/test_cel.c,
	  apps/app_confbridge.c, res/res_stasis.c, res/res_pjsip_refer.c,
	  apps/app_voicemail.c, apps/app_dial.c, channels/chan_vpb.cc,
	  addons/chan_ooh323.c, main/pickup.c, include/asterisk/aoc.h,
	  include/asterisk/stasis_bridges.h, apps/app_userevent.c,
	  apps/app_disa.c, channels/chan_console.c,
	  include/asterisk/channelstate.h, main/core_local.c,
	  channels/chan_iax2.c, main/endpoints.c, channels/chan_oss.c,
	  res/parking/parking_bridge_features.c, apps/app_agent_pool.c,
	  main/channel.c, channels/chan_misdn.c, channels/chan_skinny.c:
	  channel locking: Add locking for channel snapshot creation
	  Original commit message by mmichelson (asterisk 12 r403311):
	  "This adds channel locks around calls to create channel snapshots
	  as well as other functions which operate on a channel and then
	  end up creating a channel snapshot. Functions that expect the
	  channel to be locked prior to being called have had their
	  documentation updated to indicate such." The above was initially
	  committed and then reverted at r403398. The problem was found to
	  be in core_local.c in the publish_local_bridge_message function.
	  The ast_unreal_lock_all function locks and adds a reference to
	  the returned channels and while they were being unlocked they
	  were not being unreffed when no longer needed. Fixed by unreffing
	  the channels. Also in bridge.c a lock was obtained on
	  "other->chan", but then an attempt was made to unlock "other" and
	  not the previously locked channel. Fixed by unlocking
	  "other->chan" (closes issue ASTERISK-22709) Reported by: John
	  Bigelow ........ Merged revisions 404237 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-18 19:36 +0000 [r404211]  Alexandr Anikin <may@telecom-service.ru>

	* addons/chan_ooh323.c, configs/ooh323.conf.sample: Introduce new
	  config option 'aniasdni'. If yes then asterisk set dialed number
	  as own id back to the caller on incoming h.323 calls. Option can
	  be set globally or per user section. (closes issue
	  ASTERISK-22020) Reported by: Ross Beer

2013-12-18 19:28 +0000 [r404210]  Joshua Colp <jcolp@digium.com>

	* channels/chan_mgcp.c, main/pbx.c, channels/chan_sip.c,
	  apps/confbridge/conf_chan_record.c, tests/test_app.c,
	  tests/test_stasis_channels.c, main/core_unreal.c,
	  include/asterisk/channel.h, channels/chan_console.c,
	  channels/chan_oss.c, channels/chan_jingle.c,
	  channels/chan_misdn.c, channels/chan_h323.c, tests/test_cel.c,
	  channels/chan_nbs.c, channels/chan_pjsip.c, res/res_calendar.c,
	  apps/app_voicemail.c, channels/chan_unistim.c,
	  tests/test_substitution.c, channels/chan_vpb.cc,
	  addons/chan_ooh323.c, channels/chan_multicast_rtp.c, /,
	  apps/app_meetme.c, res/res_stasis_snoop.c, channels/chan_gtalk.c,
	  channels/chan_iax2.c, main/channel.c, channels/chan_dahdi.c,
	  channels/chan_phone.c, channels/chan_skinny.c,
	  res/parking/parking_tests.c, channels/chan_motif.c,
	  tests/test_voicemail_api.c, channels/chan_alsa.c, main/message.c,
	  addons/chan_mobile.c, tests/test_cdr.c: channels: Return
	  allocated channels locked. This change makes ast_channel_alloc
	  return allocated channels locked. By doing so no other thread can
	  acquire, lock, and manipulate the channel before it is completely
	  set up. (closes issue AST-1256) Review:
	  https://reviewboard.asterisk.org/r/3067/ ........ Merged
	  revisions 404204 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-18 19:10 +0000 [r404198]  Alexandr Anikin <may@telecom-service.ru>

	* addons/chan_ooh323.c: Implement module reload command for
	  chan_ooh323 (close issue ASTERISK-22817) Patches:
	  ooh323_module_reload.patch

2013-12-18 12:46 +0000 [r404185]  Matthew Jordan <mjordan@digium.com>

	* rest-api/api-docs/applications.json,
	  rest-api/api-docs/playbacks.json,
	  rest-api/api-docs/channels.json, rest-api/api-docs/sounds.json,
	  rest-api/resources.json, rest-api/api-docs/bridges.json,
	  rest-api/api-docs/recordings.json,
	  rest-api/api-docs/deviceStates.json,
	  rest-api/api-docs/endpoints.json, rest-api/api-docs/events.json,
	  /, rest-api/api-docs/asterisk.json: ari: Bump the version of ARI
	  to 1.0.0 (closes issue ASTERISK-23007) ........ Merged revisions
	  404184 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-18 12:01 +0000 [r404138]  Joshua Colp <jcolp@digium.com>

	* res/res_calendar.c, /: res_calendar: Protect channel when adding
	  datastore. This change adds a missing channel lock when adding a
	  datastore to a channel. ........ Merged revisions 404135 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 404136 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404137 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-18 00:36 +0000 [r404100]  Rusty Newton <rnewton@digium.com>

	* /, funcs/func_strings.c: func_strings: Documentation fix for
	  QUOTE() Example output was inaccurate. (issue ASTERISK-22970)
	  (closes issue ASTERISK-22970) Reported by: Gareth Palmer Patches:
	  func_strings.patch uploaded by Gareth Palmer (license 5169)
	  ........ Merged revisions 404081 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 404087 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 404099 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-18 00:17 +0000 [r404051]  Matthew Jordan <mjordan@digium.com>

	* /, LICENSE: LICENSE: Update language to include ARI ........
	  Merged revisions 404050 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-17 23:57 +0000 [r404049]  Jonathan Rose <jrose@digium.com>

	* /, tests/test_cel.c, tests/test_cdr.c: tests: fix
	  ast_bridge_base_new calls not using the additional arguments
	  r404042 gave ast_bridge_base_new two new arguments for setting a
	  bridge creator and name. Unfortunately since a couple test
	  modules aren't compiled by default, I missed the fact that this
	  change impacted those tests and caused compilation failures
	  against them. ........ Merged revisions 404048 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-17 23:38 +0000 [r404047]  Rusty Newton <rnewton@digium.com>

	* include/asterisk/test.h, main/channel.c, main/rtp_engine.c, /,
	  channels/chan_iax2.c, apps/app_chanspy.c, apps/app_mixmonitor.c:
	  Several components: fixing Typos in comments and code,
	  "avaliable" instead of "available" (issue ASTERISK-23021) (closes
	  issue ASTERISK-23021) Reported by: Jeremy Lainé Tested by: Rusty
	  Newton Patches: available.patch uploaded by Jeremy Lainé (license
	  6561) ........ Merged revisions 404046 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-17 23:25 +0000 [r404043]  Jonathan Rose <jrose@digium.com>

	* apps/app_bridgewait.c, res/ari/ari_model_validators.c,
	  doc/appdocsxml.xslt, main/stasis_bridges.c,
	  rest-api/api-docs/bridges.json, res/ari/resource_bridges.c,
	  apps/app_agent_pool.c, res/parking/parking_bridge.c,
	  res/ari/ari_model_validators.h, main/manager_bridges.c,
	  res/ari/resource_bridges.h, include/asterisk/bridge_internal.h,
	  apps/app_confbridge.c, res/res_stasis.c,
	  include/asterisk/bridge.h, res/res_ari_bridges.c, /,
	  main/bridge.c, main/bridge_basic.c,
	  include/asterisk/stasis_bridges.h, include/asterisk/stasis_app.h:
	  bridging: Give bridges a name and a known creator Bridges have
	  two new optional properties, a creator and a name. Certain
	  consumers of bridges will automatically provide bridges that they
	  create with these properties. Examples include app_bridgewait,
	  res_parking, app_confbridge, and app_agent_pool. In addition, a
	  name may now be provided as an argument to the POST function for
	  creating new bridges via ARI. (closes issue AFS-47) Review:
	  https://reviewboard.asterisk.org/r/3070/ ........ Merged
	  revisions 404042 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-17 18:35 +0000 [r404028-404030]  Joshua Colp <jcolp@digium.com>

	* res/res_sorcery_config.c, /: res_sorcery_config: Output an error
	  message when an object can't be created. If object creation fails
	  an error message will now be output with the id, type, and
	  configuration file. ........ Merged revisions 404029 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/framehook.c: framehooks: Re-iterate if framehook provides
	  different frame. Framehooks can be used in a reactive manner to
	  execute specific logic when a frame is received with a certain
	  type and payload. Since it is possible for framehooks to provide
	  frames it was possible for this reactive framehook to be unaware
	  of frames it is looking for. This change makes it so that when
	  framehooks return a modified frame the code will now re-iterate
	  (from the beginning) and call any previous framehooks that have
	  not provided a modified frame themselves. Review:
	  https://reviewboard.asterisk.org/r/3046/ ........ Merged
	  revisions 404027 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-17 14:41 +0000 [r404008-404009]  David M. Lee <dlee@digium.com>

	* /, configs/asterisk.conf.sample, main/asterisk.c: Changed the
	  default for live_dangerously to no ........ Merged revisions
	  404006 from http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/pjsip, /: Setting svn:ignore ........ Merged revisions
	  403748 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-17 12:59 +0000 [r403994]  Matthew Jordan <mjordan@digium.com>

	* /, res/ari/resource_channels.c: ari/resource_channels: When
	  creating a channel, specify a default format (SLIN) When creating
	  channels via ARI, the current code fails to provide any default
	  format capabilities. For non-virtual channels this isn't really a
	  problem - the channels typically receive their capabilities as a
	  result of the underlying channel driver configuration. For
	  virtual channels (such as Local channels), the lack of any format
	  capabilities causes the Asterisk core to make some 'odd' choices
	  with respect to the translation paths. The issue reporter had
	  some paths that had 3 hops on each channel leg, causing multiple
	  transcodings and some really crappy audio/performance. By
	  specifying a baseline of SLIN, we prevent that from occurring.
	  Note that this is what AMI does when it performs an Originate, as
	  does res_clioriginate. Review:
	  https://reviewboard.asterisk.org/r/3068/ (issue ASTERISK-22962)
	  Reported by: Matt DiMeo ........ Merged revisions 403993 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-16 19:11 +0000 [r403960]  David M. Lee <dlee@digium.com>

	* include/asterisk/pbx.h, main/asterisk.c, funcs/func_realtime.c,
	  main/pbx.c, main/tcptls.c, funcs/func_db.c, /,
	  README-SERIOUSLY.bestpractices.txt, configs/asterisk.conf.sample,
	  funcs/func_shell.c, funcs/func_env.c, funcs/func_lock.c,
	  UPGRADE-12.txt: security: Inhibit execution of privilege
	  escalating functions This patch allows individual dialplan
	  functions to be marked as 'dangerous', to inhibit their execution
	  from external sources. A 'dangerous' function is one which
	  results in a privilege escalation. For example, if one were to
	  read the channel variable SHELL(rm -rf /) Bad Things(TM) could
	  happen; even if the external source has only read permissions.
	  Execution from external sources may be enabled by setting
	  'live_dangerously' to 'yes' in the [options] section of
	  asterisk.conf. Although doing so is not recommended. Also, the
	  ABI was changed to something more reasonable, since Asterisk 12
	  does not yet have a public release. (closes issue ASTERISK-22905)
	  Review: http://reviewboard.digium.internal/r/432/ ........ Merged
	  revisions 403913 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 403917 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 403959 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-16 18:31 +0000 [r403958]  Jonathan Rose <jrose@digium.com>

	* /, main/bridge.c: transfers: Fix bug setting both BLINDTRANSFER
	  and ATTENDEDTRANSFER The ast_bridge_set_transfer_variables
	  function is supposed to wipe whichever variable isn't being set.
	  Instead it was setting both to the new value. Oops. (issue
	  AFS-24) ........ Merged revisions 403957 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-16 16:12 +0000 [r403857-403865]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/pbx.c, /: pbx.c: put copy of ast_exten.data on stack to
	  prevent memory corruption During dialplan execution in
	  pbx_extension_helper(), the contexts global read lock prevents
	  link list corruption, but was released with a pointer to the
	  ast_exten and data later used in variable substitution. Instead,
	  this patch removes pbx_substitute_variables() and locates a copy
	  of the ast_exten data on the stack before releasing the lock,
	  where ast_exten could get free'd by another thread performing a
	  module reload. (issue AST-1179) Reported by: Thomas Arimont
	  (issue AST-1246) Reported by: Alexander Hömig Review:
	  https://reviewboard.asterisk.org/r/3055/ ........ Merged
	  revisions 403862 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 403863 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 403864 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, apps/app_sms.c: app_sms: BufferOverflow when receiving odd
	  length 16 bit message This patch prevents an infinite loop
	  overwriting memory when a message is received into the
	  unpacksms16() function, where the length of the message is an odd
	  number of bytes. (closes issue ASTERISK-22590) Reported by: Jan
	  Juergens Tested by: Jan Juergens ........ Merged revisions 403856
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-15 01:39 +0000 [r403824]  Matthew Jordan <mjordan@digium.com>

	* channels/pjsip/dialplan_functions.c, /: pjsip/dialplan_functions:
	  Use the right buffer length when printing URIs While
	  entertaining, sizeof(buflen) is not the same as buflen. Doh.
	  ........ Merged revisions 403823 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-14 17:28 +0000 [r403810-403812]  Joshua Colp <jcolp@digium.com>

	* include/asterisk/res_pjsip.h, /, res/res_pjsip/location.c,
	  res/res_pjsip/pjsip_options.c, res/res_pjsip.c: res_pjsip: Apply
	  outbound proxy to all SIP requests. Objects which are involved in
	  SIP request creation and sending now allow an outbound proxy to
	  be specified. For cases where an endpoint is used the outbound
	  proxy specified there will be applied. (closes issue
	  ASTERISK-22673) Reported by: Antti Yrjola Review:
	  https://reviewboard.asterisk.org/r/3022/ ........ Merged
	  revisions 403811 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis_channels.c, apps/app_queue.c,
	  res/ari/ari_model_validators.c, apps/app_dial.c,
	  res/ari/ari_model_validators.h, main/dial.c,
	  include/asterisk/stasis_channels.h,
	  rest-api/api-docs/events.json, /, res/stasis/app.c: res_stasis:
	  Expose event for call forwarding and follow forwarded channel.
	  This change adds an event for when an originated call is
	  redirected to another target. This event contains the original
	  channel and the newly created channel. If a stasis subscription
	  exists on the original originated channel for a stasis
	  application then a new subscription will also be created on the
	  stasis application to the redirected channel. This allows the
	  application to follow the call path completely. (closes issue
	  ASTERISK-22719) Reported by: Joshua Colp Review:
	  https://reviewboard.asterisk.org/r/3054/ ........ Merged
	  revisions 403808 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-13 21:35 +0000 [r403797]  Jonathan Rose <jrose@digium.com>

	* /, res/res_pjsip_messaging.c, main/message.c: documentation: Add
	  PJSIP technology to messaging documentation ........ Merged
	  revisions 403796 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-13 20:17 +0000 [r403784]  Richard Mudgett <rmudgett@digium.com>

	* /, main/test.c: test.c: Fix too sticky unit test failed status.
	  Rerunning a failed unit test after loading any required modules
	  should allow the test to report a pass status if it now passes.
	  ........ Merged revisions 403782 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-13 20:13 +0000 [r403783]  Jonathan Rose <jrose@digium.com>

	* /, main/bridge.c, main/bridge_basic.c, include/asterisk/bridge.h,
	  res/parking/parking_bridge_features.c,
	  res/parking/parking_manager.c: Transfers: Make Asterisk set
	  ATTENDEDTRANSFER/BLINDTRANSFER more reliably There were still a
	  few cases in which ATTENDEDTRANSFER and BLINDTRANSFER wouldn't be
	  set on channels involved with blind and attended transfers. This
	  would happen with features that were initialized by channel
	  driver specific mechanisms in multiparty calls. This patch
	  resolves those cases while attempted to keep the behavior for
	  setting those variables as consistent as possible. (closes issue
	  AFS-24) Review: https://reviewboard.asterisk.org/r/3040/ ........
	  Merged revisions 403781 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-13 18:33 +0000 [r403750-403768]  Kevin Harwell <kharwell@digium.com>

	* main/channel.c, /, channels/chan_sip.c,
	  include/asterisk/channel.h, bridges/bridge_native_rtp.c,
	  channels/chan_pjsip.c: bridge_native_rtp: Deadlock during 4-way
	  conference creation The change contains a slightly adjusted patch
	  that was on the issue (submitted by kmoore). A fix was made by
	  adding in a bridge lock while calling bridge_start/stop from the
	  framehook callback. Since the framehook callback is not called
	  from the bridging core the bridge is not locked, but needs to be
	  before calling bridge_start. (closes issue ASTERISK-22749)
	  Reported by: Kinsey Moore Review:
	  https://reviewboard.asterisk.org/r/3066/ Patches:
	  lock_inversion.diff uploaded by kmoore (license 6273) ........
	  Merged revisions 403767 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* rest-api/api-docs/channels.json, res/ari/resource_channels.c,
	  res/res_ari_channels.c, res/ari/resource_channels.h, /,
	  main/http.c: ARI: Allow specifying channel variables during a
	  POST /channels Added the ability to specify channel variables
	  when creating/originating a channel in ARI. The variables are
	  sent in the body of the request and should be formatted as a
	  single level JSON object. No nested objects allowed. For example:
	  {"variable1": "foo", "variable2": "bar"}. (closes issue
	  ASTERISK-22872) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3052/ ........ Merged
	  revisions 403752 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis_answer.c, rest-api/api-docs/bridges.json,
	  res/ari/resource_bridges.c, res/res_ari_bridges.c,
	  res/stasis/command.c, res/res_stasis_playback.c, /,
	  res/stasis/control.c, res/stasis/command.h,
	  include/asterisk/stasis_app.h,
	  include/asterisk/stasis_app_impl.h, res/res_stasis_recording.c:
	  ARI: Adding a channel to a bridge while a live recording is
	  active blocks Added the ability to have rules that are checked
	  when adding and/or removing channels to/from a bridge. In this
	  case, if a channel is currently recording and someone attempts to
	  add it to a bridge an "is recording" rule is checked, fails, and
	  a 409 conflict is returned. Also command functions now return an
	  integer value that can be descriptive of what kind of problems,
	  if any, occurred before or during execution. (closes issue
	  ASTERISK-22624) Reported by: Joshua Colp Review:
	  https://reviewboard.asterisk.org/r/2947/ ........ Merged
	  revisions 403749 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-13 05:00 +0000 [r403737]  Matthew Jordan <mjordan@digium.com>

	* /, channels/Makefile: channels/Makefile: clean pjsip directory
	  ........ Merged revisions 403736 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-13 00:40 +0000 [r403726]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/app.h, tests/test_voicemail_api.c, main/app.c:
	  test_voicemail_api: Add check for a registered voicemail provider
	  before tests. It is much nicer diagnosing a test failure if
	  app_voicemail is actually loaded.

2013-12-12 19:46 +0000 [r403714]  Scott Griepentrog <sgriepentrog@digium.com>

	* contrib/ast-db-manage/config/versions/581a4264e537_adding_extensions.py
	  (added), /: realtime: Create extensions in alembic ast-db-manage
	  contribution When the alembic scripts were written for creating
	  Asterisk realtime databases the extensions table for dialplan
	  wasn't included. This update creates the extensions table.
	  (closes issue ASTERISK-22815) Reported by: Zone Conkle Review:
	  https://reviewboard.asterisk.org/r/3064/ ........ Merged
	  revisions 403713 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-12 19:18 +0000 [r403707]  Jonathan Rose <jrose@digium.com>

	* /, channels/chan_pjsip.c: chan_pjsip: Revert r403587 This patch
	  was intended to eliminate a deadlock that occurs when masquerades
	  occur in pjsip channels, but has some potential side effects.
	  Mark Michelson is currently working on addressing this problem
	  from another angle. (issue ASTERISK-22936) Reported by: Jonathan
	  Rose ........ Merged revisions 403705 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-11 20:24 +0000 [r403687]  Kevin Harwell <kharwell@digium.com>

	* include/asterisk/res_pjsip.h, res/res_pjsip/config_global.c, /,
	  configs/pjsip.conf.sample, res/res_pjsip/pjsip_configuration.c,
	  res/res_pjsip_messaging.c,
	  res/res_pjsip/include/res_pjsip_private.h, res/res_pjsip.c:
	  res_pjsip_messaging: send message to a default outbound endpoint
	  In some cases messages need to be sent to a direct URI (sip:<ip
	  address>). This patch adds in that support by using a default
	  outbound endpoint. When sending messages, if no endpoint can be
	  found then the default one is used. To facilitate this a new
	  default_outbound_endpoint option was added to the globals section
	  for pjsip.conf. Review: https://reviewboard.asterisk.org/r/2944/
	  ........ Merged revisions 403680 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-11 19:22 +0000 [r403652]  Russell Bryant <russell@russellbryant.com>

	* /, channels/chan_sip.c: Reset peer outboundproxy on sip.conf
	  reload If you set a peer's outboundproxy and then removed it from
	  the config, this would not get picked up in a config reload. This
	  patch fixes that by resetting it in set_peer_defaults(). Closes
	  ASTERISK-19454 Review: https://reviewboard.asterisk.org/r/3065/
	  ........ Merged revisions 403634 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 403635 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 403639 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-11 19:19 +0000 [r403643]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_voicemail.c, include/asterisk/app.h,
	  include/asterisk/doxyref.h, main/app.c: app_voicemail: Voicemail
	  callback registration/unregistration function improvements. * The
	  voicemail registration/unregistration functions now take a struct
	  of callbacks instead of a lengthy parameter list of callbacks. *
	  The voicemail registration/unregistration functions now prevent a
	  competing module from interfering with an already registered
	  callback supplying module.

2013-12-11 13:06 +0000 [r403617-403619]  Matthew Jordan <mjordan@digium.com>

	* channels/pjsip/dialplan_functions.c,
	  include/asterisk/res_pjsip_session.h, channels/pjsip (added), /,
	  funcs/func_channel.c, channels/pjsip/include,
	  channels/pjsip/include/dialplan_functions.h, res/res_pjsip_t38.c,
	  channels/pjsip/include/chan_pjsip.h, channels/Makefile,
	  channels/chan_pjsip.c, main/xmldoc.c: func_channel, chan_pjsip:
	  Add CHANNEL read function support for chan_pjsip This patch adds
	  CHANNEL read support for chan_pjsip. This allows the dialplan to
	  use the CHANNEL function on a chan_pjsip channel to obtain
	  run-time information about the channel from the PJSIP channel
	  driver and the PJSIP stack. This includes: * RTP information,
	  including source/destination media addresses, whether or not the
	  media is secure, held, and other properties. * RTCP information.
	  This includes sets of parseable information, as well as
	  individual statistic attriutes. * PJSIP information. This
	  includes URIs, local/remote signalling addresses, whether or not
	  the signalling is secure, and other properties. * The endpoint
	  name. This can be used in conjunction with the PJSIP_ENDPOINT
	  function to obtain more detailed endpoint information. Review:
	  https://reviewboard.asterisk.org/r/3038/ ........ Merged
	  revisions 403618 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* Makefile, funcs/func_pjsip_endpoint.c (added), doc/snapshots.xslt
	  (removed), /, doc/appdocsxml.xslt (added), doc/appdocsxml.dtd,
	  main/sorcery.c: func_pjsip_endpoint: Add PJSIP_ENDPOINT function
	  for querying endpoint details This patch adds a new function,
	  PJSIP_ENDPOINT, which lets the dialplan query, for any endpoint,
	  any property configured on an endpoint. This function is a
	  companion to the CHANNEL function, which can be used to extract
	  the endpoint name for a channel. Review:
	  https://reviewboard.asterisk.org/r/3035 ........ Merged revisions
	  403616 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-10 15:15 +0000 [r403605]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_authenticator_digest.c: Fix correct authentication
	  behavior for artificial endpoint. When switching to using a
	  vector for authentication, I initialized the vector for the
	  artificial endpoint to be of size 1. However, this does not
	  result in AST_VECTOR_SIZE() returning 1 since there isn't
	  actually anything in the vector. Rather than trifle with the
	  vector by putting unnecessary elements in, I simply changed the
	  callback in res_pjsip_authenticator_digest.c to explicitly report
	  that the artificial endpoint requires authentication. Thanks to
	  Joshua Colp for pointing this out.

2013-12-09 22:59 +0000 [r403576-403588]  Jonathan Rose <jrose@digium.com>

	* /, channels/chan_pjsip.c: chan_pjsip: Fix a sticking channel lock
	  caused by channel masquerades (closes issue ASTERISK-22936)
	  Reported by: Jonathan Rose Review:
	  https://reviewboard.asterisk.org/r/3042/ ........ Merged
	  revisions 403587 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* CHANGES, main/dial.c, apps/app_page.c, include/asterisk/dial.h:
	  app_page: Add predial handlers for app_page. (closes issue
	  AFS-14) Review: https://reviewboard.asterisk.org/r/3045/

2013-12-09 19:24 +0000 [r403544-403560]  Richard Mudgett <rmudgett@digium.com>

	* /, res/res_sorcery_astdb.c: Reverting regex part of -r403545 at
	  request of file. res_sorcery_astdb.c: Fix get multiple records by
	  regex. * Fix sorcery_astdb_retrieve_regex() pattern matching. Let
	  the regexec() function match the stored key values instead of
	  having astdb prefilter them. Previoiusly you could only use a
	  simple regex pattern when the pattern began with '^'. ........
	  Merged revisions 403559 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_sorcery_astdb.c: res_sorcery_astdb.c: Fix get multiple
	  records by regex. * Fix sorcery_astdb_retrieve_regex() pattern
	  matching. Let the regexec() function match the stored key values
	  instead of having astdb prefilter them. Previoiusly you could
	  only use a simple regex pattern when the pattern began with '^'.
	  * Fix off nominal memory leak in sorcery_astdb_retrieve_regex().
	  ........ Merged revisions 403545 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/sorcery.c, /: sorcery: Eliminate shadowing a varaible that
	  caused confusion. * Eliminated shadowing of the
	  __ast_sorcery_apply_config() name parameter causing confusion. *
	  Fix potential crash from sorcery.conf user input in
	  __ast_sorcery_apply_config() if the user supplied a malformed
	  config line that is missing the sorcery object type name. *
	  Remove redundant test in __ast_sorcery_apply_config(). !config
	  and config == CONFIGS_STATUS_FILEMISSING are identical. ........
	  Merged revisions 403541 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-09 18:32 +0000 [r403543]  Joshua Colp <jcolp@digium.com>

	* /, main/endpoints.c: endpoints: Keep a reference to channel ids
	  when creating snapshot. The snapshot process for endpoints uses
	  the channel ids present on the endpoint itself. Without keeping a
	  reference it was possible for the strings to be freed underneath
	  any consumer of an endpoint snapshot. A reference is now held by
	  the snapshot to the channel ids and released when the snapshot is
	  destroyed. (issue ASTERISK-22801) Reported by: Matt Jordan
	  ........ Merged revisions 403542 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-09 18:14 +0000 [r403528]  Richard Mudgett <rmudgett@digium.com>

	* main/sorcery.c, /: sorcery: Whitespace You would think that a new
	  file would start off without any whitespace oddities. ........
	  Merged revisions 403527 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-09 17:29 +0000 [r403512-403526]  Mark Michelson <mmichelson@digium.com>

	* apps/app_confbridge.c, CHANGES,
	  apps/confbridge/conf_state_multi_marked.c: Add a
	  CONFBRIDGE_RESULT channel variable to discern why a channel left
	  a ConfBridge. Review: https://reviewboard.asterisk.org/r/3009

	* CHANGES, apps/app_mixmonitor.c: Create function for retrieving
	  Mixmonitor instance data. For the time, this is only useful for
	  retrieving the filename. The purpose of this function is to
	  better facilitate multiple mixmonitors per channel. Setting a
	  MIXMONITOR_FILENAME channel variable is not conducive to such
	  behavior, so allowing finer grained access to individual
	  mixmonitor properties improves the situation. The
	  MIXMONITOR_FILENAME channel variable is still set, though, so
	  there is no worry about backwards compatibility. Review:
	  https://reviewboard.asterisk.org/r/3023

2013-12-09 16:41 +0000 [r403511]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_nat.c, /: res_pjsip_nat: Add NAT module to session
	  dialogs. Due to the way pjproject internally works it was
	  possible for the NAT module to not be invoked on messages with-in
	  a session dialog. This means that the various parts of the
	  message would not get rewritten with the source IP address and
	  port. This change uses a session supplement to add the NAT module
	  to the dialog on the first incoming or outgoing INVITE. (closes
	  issue ASTERISK-22941) Reported by: Leif Madsen ........ Merged
	  revisions 403510 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-09 16:10 +0000 [r403499]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip/config_auth.c,
	  res/res_pjsip_outbound_authenticator_digest.c,
	  res/res_pjsip_authenticator_digest.c,
	  res/res_pjsip_outbound_registration.c,
	  res/res_pjsip/pjsip_configuration.c,
	  res/res_pjsip/pjsip_distributor.c, res/res_pjsip.c,
	  include/asterisk/res_pjsip.h: Switch PJSIP auth to use a vector.
	  Since Asterisk has a vector API now, places where arrays are
	  manually resized don't really make sense any more. Since the auth
	  work in PJSIP was freshly-written, it was easy to reform it to
	  use a vector. Review: https://reviewboard.asterisk.org/r/3044

2013-12-09 03:21 +0000 [r403436-403466]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_fax_spandsp.c: res_fax_spandsp: Always init T.38
	  session to avoid crashes during state change Prior to this patch,
	  res_fax_spandsp was conservative with how it initialized the
	  spandsp T.38 context. It would only initialize it if the driver
	  thought the current state was a T.38 fax. While this works fine
	  in nominal situations, in certain off nominal situations,
	  res_fax_spandsp can believe that a T.38 fax will not occur when
	  in fact one has started. In particular, this was discovered when
	  res_fax would fall back to audio after timing out on a T.38
	  upgrade. The SIP channel driver would continue to retry the
	  re-INVITE and - if the remote end responded after res_fax timed
	  out with a 200 OK - a T.38 frame would be delivered to the
	  res_fax stack when it no longer expected it. As it turns out,
	  there does not appear to be any downside to always initializing
	  the T.38 context, other than the actual memory allocation. Since
	  that avoids this off nominal situation (and others which are
	  equally likely hard to predict), this is the safest way to avoid
	  this problem. Much thanks to Torrey as well for providing a
	  scenario that reproduces this issue. (closes issue
	  ASTERISK-21242) Reported by: Ashley Winters Tested by: Torrey
	  Searle patches: always-init-t38.patch uploaded by awinters
	  (License 6477) A_PARTY.xml uploaded by tsearle (License 5334)
	  ........ Merged revisions 403449 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 403450 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 403458 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_config_sqlite.c: res_config_sqlite: Check for CDR
	  unregistration failures If the CDR unregistration fails due to an
	  inflight CDR, the res_config_sqlite module needs to bail on
	  unloading itself. Otherwise, the config could be unloaded
	  (including the CDR table name) while the CDR engine posts a CDR
	  to the still registered backend, resulting in a crash. ........
	  Merged revisions 403435 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-05 23:40 +0000 [r403414]  Jonathan Rose <jrose@digium.com>

	* apps/app_record.c: app_record: Add an option that allows DTMF '0'
	  to act as an additional terminator Using this terminator when
	  active results in ${RECORD_STATUS} being set to 'OPERATOR'
	  instead of 'DTMF' (closes issue AFS-7) Review:
	  https://reviewboard.asterisk.org/r/3041/

2013-12-05 22:10 +0000 [r403402-403404]  David M. Lee <dlee@digium.com>

	* addons/chan_mobile.c, main/bridge_channel.c, tests/test_cdr.c,
	  channels/chan_pjsip.c, res/parking/parking_manager.c,
	  channels/chan_mgcp.c, channels/chan_unistim.c, main/pbx.c, /,
	  apps/app_meetme.c, funcs/func_timeout.c, main/bridge.c,
	  tests/test_stasis_channels.c, main/core_unreal.c,
	  include/asterisk/channel.h, channels/chan_gtalk.c, main/cel.c,
	  apps/app_queue.c, channels/sig_pri.c, main/stasis_bridges.c,
	  channels/chan_jingle.c, channels/chan_phone.c,
	  channels/chan_dahdi.c, main/dial.c, channels/sig_analog.c,
	  include/asterisk/stasis_channels.h, res/res_agi.c,
	  channels/chan_motif.c, channels/chan_h323.c, tests/test_cel.c,
	  apps/app_confbridge.c, res/res_stasis.c, res/res_pjsip_refer.c,
	  apps/app_voicemail.c, apps/app_dial.c, channels/chan_vpb.cc,
	  addons/chan_ooh323.c, channels/chan_sip.c, main/pickup.c,
	  include/asterisk/aoc.h, include/asterisk/stasis_bridges.h,
	  apps/app_userevent.c, apps/app_disa.c, main/core_local.c,
	  include/asterisk/channelstate.h, channels/chan_console.c,
	  channels/chan_iax2.c, main/endpoints.c, channels/chan_oss.c,
	  res/parking/parking_bridge_features.c, apps/app_agent_pool.c,
	  main/channel.c, channels/chan_misdn.c, channels/chan_skinny.c,
	  pbx/pbx_realtime.c, channels/chan_alsa.c, main/stasis_channels.c,
	  channels/chan_nbs.c: Reverting r403311. It's causing ARI tests to
	  hang. ........ Merged revisions 403398 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/stasis/control.c: ari: Fix deadlock problem with functions
	  that use autoservice. The code for getting channel variables from
	  ARI assumed that you needed to lock the channel in order to
	  properly execute functions and read channel variables.
	  Apparently, this is not the case, since any dialplan function
	  that puts the channel into autoservice deadlocks when attempting
	  to remove the channel from autoservice. ........ Merged revisions
	  403342 from http://svn.asterisk.org/svn/asterisk/branches/12

	* /: Multiple revisions 403304,403310 ........ r403304 | dlee |
	  2013-12-02 12:34:50 -0600 (Mon, 02 Dec 2013) | 1 line Fixed the
	  filename for the ari.conf docs ........ r403310 | file |
	  2013-12-03 10:32:12 -0600 (Tue, 03 Dec 2013) | 5 lines Revert
	  revision 403304: Fixed the filename for the ari.conf docs The
	  changed value refers to the name of the module. The name of the
	  configuration file is specified in the configFile section.
	  ........ Merged revisions 403304,403310 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-04 21:42 +0000 [r403378]  Kevin Harwell <kharwell@digium.com>

	* /, res/res_pjsip_registrar.c: res_pjsip_registrar: undefined
	  function pointer symbol Used a static wrapper around the
	  offending function to alleviate the issue. Reported by: rmudgett
	  ........ Merged revisions 403377 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-04 20:54 +0000 [r403365]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_t38.c, /: res_pjsip_t38: Don't pass T.38 control
	  frames through to other hooks. This crept up during gateway
	  testing where the gateway would receive the request to negotiate
	  and assume it came from the remote side, causing the gateway
	  state machine to go a little, to a use a technical term, "wonky".
	  ........ Merged revisions 403364 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-04 18:41 +0000 [r403350]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip.c: Initialize the hash value argument to
	  pj_hash_get() to 0. Passing a non-zero value causes PJLIB to use
	  the given input as the hash value. Passing zero causes the
	  parameter to become an output parameter that receives the hash
	  value that was computed based on the given key. This change
	  essentially makes ast_sip_dict_get() properly retrieve the
	  desired value. ........ Merged revisions 403349 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-03 18:01 +0000 [r403330]  Joshua Colp <jcolp@digium.com>

	* /, configure, include/asterisk/autoconfig.h.in, configure.ac,
	  res/res_pjsip_session.c: res_pjsip_session: Add support for
	  PJMEDIA_SDP_NEG_ALLOW_MEDIA_CHANGE flag. Newer versions of PJSIP
	  have changed to using a flag for the
	  PJMEDIA_SDP_NEG_ALLOW_MEDIA_CHANGE instead of a define. This adds
	  a configure check to detect the presence of the flag and use it
	  if found. ........ Merged revisions 403329 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-03 17:35 +0000 [r403327]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/sorcery.h, res/res_pjsip/pjsip_configuration.c,
	  res/res_pjsip_registrar_expire.c, res/res_pjsip/pjsip_options.c,
	  tests/test_sorcery.c, include/asterisk/bucket.h, main/sorcery.c,
	  /, main/bucket.c: sorcery, bucket: Change observer remove calls
	  to take const callbacks struct. * Make
	  ast_sorcery_observer_remove() accept a const callbacks struct. *
	  Make ast_sorcery_observer_remove() tolerant of the sorcery
	  parameter being NULL. Now it can be called within a module unload
	  routine if the sorcery initialization fails. * Fix
	  ast_sorcery_observer_add() to fail if the container link fails.
	  ........ Merged revisions 403324 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-03 17:07 +0000 [r403314]  Mark Michelson <mmichelson@digium.com>

	* channels/chan_nbs.c, main/bridge_channel.c, res/res_stasis.c,
	  channels/chan_pjsip.c, res/parking/parking_manager.c,
	  apps/app_voicemail.c, channels/chan_unistim.c,
	  channels/chan_vpb.cc, addons/chan_ooh323.c, /,
	  include/asterisk/aoc.h, apps/app_meetme.c, main/bridge.c,
	  apps/app_userevent.c, channels/chan_gtalk.c,
	  channels/chan_iax2.c, main/endpoints.c, main/stasis_bridges.c,
	  main/channel.c, channels/chan_phone.c, channels/chan_dahdi.c,
	  main/dial.c, channels/sig_analog.c, channels/chan_skinny.c,
	  res/res_agi.c, channels/chan_motif.c, pbx/pbx_realtime.c,
	  channels/chan_alsa.c, main/stasis_channels.c,
	  apps/app_confbridge.c, addons/chan_mobile.c, tests/test_cdr.c,
	  res/res_pjsip_refer.c, channels/chan_mgcp.c, apps/app_dial.c,
	  main/pbx.c, channels/chan_sip.c, main/pickup.c,
	  funcs/func_timeout.c, tests/test_stasis_channels.c,
	  main/core_unreal.c, include/asterisk/stasis_bridges.h,
	  apps/app_disa.c, include/asterisk/channel.h, main/core_local.c,
	  include/asterisk/channelstate.h, channels/chan_console.c,
	  main/cel.c, apps/app_queue.c, channels/sig_pri.c,
	  channels/chan_oss.c, res/parking/parking_bridge_features.c,
	  apps/app_agent_pool.c, channels/chan_jingle.c,
	  channels/chan_misdn.c, include/asterisk/stasis_channels.h,
	  channels/chan_h323.c, tests/test_cel.c: Add channel locking for
	  channel snapshot creation. This adds channel locks around calls
	  to create channel snapshots as well as other functions which
	  operate on a channel and then end up creating a channel snapshot.
	  Functions that expect the channel to be locked prior to being
	  called have had their documentation updated to indicate such.
	  ........ Merged revisions 403311 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-03 16:39 +0000 [r403313]  Joshua Colp <jcolp@digium.com>

	* main/media_index.c, /: media_index: Make media indexing tolerable
	  of bad symlinks. Media indexing will now skip over files and
	  directories that stat will not return information about. This can
	  occur under normal conditions when a symbolic link points to a
	  location that no longer exists. ........ Merged revisions 403312
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-02 18:12 +0000 [r403292]  Alexandr Anikin <may@telecom-service.ru>

	* addons/chan_ooh323.c, /: Check and reject non-digits e164 values
	  on peers and general sections in ooh323.conf Regenerate e164
	  endpoint list on reload ooh323 (issue ASTERISK-22901) Reported
	  by: Cyril CONSTANTIN Patches: ASTERISK-22901.patch ........
	  Merged revisions 403288 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 403290 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-12-01 21:13 +0000 [r403257-403272]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip_session.c: res_pjsip_session: Apply fromuser and
	  fromdomain to all requests as documented. ........ Merged
	  revisions 403271 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_t38.c, /: res_pjsip_t38: Add the framehook to the
	  channel only on first INVITE. The check for determining whether
	  the T.38 framehook should be added to the channel or not has now
	  been changed to guarantee adding only occurs on the first
	  incoming or outgoing INVITE. ........ Merged revisions 403258
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip/security_events.c, res/res_pjsip/pjsip_options.c,
	  res/res_pjsip.c, res/res_pjsip_transport_websocket.c,
	  include/asterisk/res_pjsip.h, /, res/res_pjsip/location.c:
	  res_pjsip_transport_websocket: Fix security events and simplify
	  implementation. Transport type determination for security events
	  has been simplified to use the type present on the message itself
	  instead of searching through configured transports to find the
	  transport used. The actual WebSocket transport has also been
	  simplified. It now leverages the existing PJSIP transport manager
	  for finding the active WebSocket transport for outgoing messages.
	  This removes the need for res_pjsip_transport_websocket to store
	  a mapping itself. (closes issue ASTERISK-22897) Reported by: Max
	  E. Reyes Vera J. Review: https://reviewboard.asterisk.org/r/3036/
	  ........ Merged revisions 403256 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-30 14:12 +0000 [r403241]  Joshua Colp <jcolp@digium.com>

	* res/ari/ari_model_validators.h, rest-api/api-docs/events.json, /,
	  res/ari/ari_model_validators.c: res_ari: Add Recording events to
	  the validator. ........ Merged revisions 403240 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-28 02:12 +0000 [r403208-403224]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_sdp_rtp.c, /: res_pjsip_sdp_rtp: Don't produce an
	  invalid media stream with no formats. Depending on configuration
	  it was possible for a media stream to be created without any
	  media formats. The produced SDP would fail internal validation
	  and cause a crash. The code will now no longer add media streams
	  with no formats to the SDP, allowing it to pass validation and
	  work. (closes issue ASTERISK-22858) Reported by: Anthony Messina
	  ........ Merged revisions 403223 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_header_funcs.c, /: res_pjsip_header_funcs: Don't
	  add headers to re-INVITEs. When sending a re-INVITE to an
	  endpoint it was possible for received headers to be added as well
	  (since they are stored for retrieval using the PJSIP_HEADER
	  dialplan function). This caused a broken (and potentially large)
	  SIP INVITE to be produced and sent. This changes the module so it
	  will no longer add headers to re-INVITEs. (closes issue
	  ASTERISK-22882) Reported by: David M. Lee ........ Merged
	  revisions 403221 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis_playback.c, /: res_stasis_playback: Add 'number',
	  'digits', and 'characters' URI scheme implementations. This
	  change adds new URI scheme implementations for playing numbers,
	  digits, and characters. This is done as part of the normal
	  playback mechanism and can be used with queueing to create a
	  combined sentence. Review:
	  https://reviewboard.asterisk.org/r/3028/ ........ Merged
	  revisions 403209 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip/pjsip_configuration.c, res/res_pjsip.c,
	  res/res_pjsip_session.c, include/asterisk/res_pjsip.h:
	  res_pjsip_session: Add configurable behavior for redirects. The
	  action taken when a redirect occurs is now configurable on a
	  per-endpoint basis. The redirect can either be treated as a
	  redirect to a local extension, to a URI that is dialed through
	  the Asterisk core, or to a URI that is dialed within PJSIP
	  itself. (closes issue ASTERISK-21710) Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/2963/ ........ Merged
	  revisions 403207 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-27 17:32 +0000 [r403192]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/astdb.h: astdb: Tweak some doxygen comments.

2013-11-27 16:12 +0000 [r403180]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip/pjsip_configuration.c: res_pjsip: Fix crash when
	  reloading certain configurations. Certain options available that
	  specify a SIP URI perform validation on the provided URI using
	  the PJSIP URI parser. This operation requires that the thread
	  executing it be registered with the PJLIB library. During reloads
	  this was done on a thread which was NOT registered with it. This
	  fixes the problem by creating a task which reloads the
	  configuration on a PJSIP thread. (closes issue ASTERISK-22923)
	  Reported by: Anthony Messina ........ Merged revisions 403179
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-27 15:48 +0000 [r403177]  David M. Lee <dlee@digium.com>

	* res/res_ari_channels.c, include/asterisk/ari.h,
	  rest-api-templates/param_parsing.mustache,
	  include/asterisk/http.h, res/res_ari_recordings.c,
	  res/res_ari_endpoints.c, main/http.c,
	  rest-api-templates/swagger_model.py, res/res_ari_playbacks.c,
	  res/res_ari_sounds.c, rest-api-templates/asterisk_processor.py,
	  res/res_ari_bridges.c, tests/test_ari.c, res/res_ari.c, /,
	  res/res_ari_device_states.c, res/res_ari_asterisk.c,
	  rest-api-templates/res_ari_resource.c.mustache,
	  res/res_ari_applications.c: ari:Add application/json parameter
	  support The patch allows ARI to parse request parameters from an
	  incoming JSON request body, instead of requiring the request to
	  come in as query parameters (which is just weird for POST and
	  DELETE) or form parameters (which is okay, but a bit asymmetric
	  given that all of our responses are JSON). For any operation that
	  does _not_ have a parameter defined of type body (i.e.
	  "paramType": "body" in the API declaration), if a request
	  provides a request body with a Content type of
	  "application/json", the provided JSON document is parsed and
	  searched for parameters. The expected fields in the provided JSON
	  document should match the query parameters defined for the
	  operation. If the parameter has 'allowMultiple' set, then the
	  field in the JSON document may optionally be an array of values.
	  (closes issue ASTERISK-22685) Review:
	  https://reviewboard.asterisk.org/r/2994/

2013-11-27 15:31 +0000 [r403161-403174]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip/pjsip_configuration.c: res_pjsip: Update
	  handling of some options to work with new option names. Some
	  options (such as call_group and pickup_group) share the same
	  configuration handler and decide what logic to use based on the
	  name of the option. These handlers were not updated to check for
	  the new option names and were treating the options as invalid.
	  This change simply updates the handlers with the proper names of
	  the options. (closes issue ASTERISK-22922) Reported by: Anthony
	  Messina ........ Merged revisions 403173 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, configure, include/asterisk/autoconfig.h.in, configure.ac: Fix
	  a configure issue with PJSIP transaction group lock detection.
	  The configure check did not use the provided paths for pjproject
	  if provided when looking for transaction group lock support.
	  ........ Merged revisions 403160 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-23 17:48 +0000 [r403133-403135]  Kevin Harwell <kharwell@digium.com>

	* res/ari.make, rest-api/api-docs/applications.json,
	  res/ari/resource_device_states.h (added),
	  include/asterisk/stasis_app_device_state.h (added),
	  res/ari/resource_applications.h, res/res_stasis.c,
	  include/asterisk/devicestate.h, rest-api/api-docs/events.json,
	  res/res_stasis_device_state.exports.in (added), res/stasis/app.c,
	  res/res_ari_device_states.c (added), /,
	  include/asterisk/stasis_app.h, main/devicestate.c,
	  res/stasis/app.h, rest-api/resources.json,
	  res/res_stasis_device_state.c (added),
	  res/ari/ari_model_validators.c, res/ari/ari_model_validators.h,
	  res/ari/resource_device_states.c (added),
	  rest-api/api-docs/deviceStates.json (added),
	  rest-api-templates/ari.make.mustache: ARI: Implement device state
	  API Created a data model and implemented functionality for an ARI
	  device state resource. The following operations have been added
	  that allow a user to manipulate an ARI controlled device:
	  Create/Change the state of an ARI controlled device PUT
	  /deviceStates/{deviceName}&{deviceState} Retrieve all ARI
	  controlled devices GET /deviceStates Retrieve the current state
	  of a device GET /deviceStates/{deviceName} Destroy a device-state
	  controlled by ARI DELETE /deviceStates/{deviceName} The ARI
	  controlled device must begin with 'Stasis:'. An example
	  controlled device name would be Stasis:Example. A
	  'DeviceStateChanged' event has also been added so that an
	  application can subscribe and receive device change events. Any
	  device state, ARI controlled or not, can be subscribed to. While
	  adding the event, the underlying subscription control mechanism
	  was refactored so that all current and future resource
	  subscriptions would be the same. Each event resource must now
	  register itself in order to be able to properly handle
	  [un]subscribes. (issue ASTERISK-22838) Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/3025/ ........ Merged
	  revisions 403134 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_registrar.c, main/sorcery.c,
	  include/asterisk/res_pjsip.h, include/asterisk/acl.h,
	  res/res_pjsip/config_auth.c, include/asterisk/utils.h,
	  res/res_pjsip.exports.in, /,
	  res/res_pjsip_endpoint_identifier_ip.c, main/acl.c, main/utils.c,
	  res/res_pjsip.c, res/res_pjsip_exten_state.c,
	  include/asterisk/res_pjsip_pubsub.h, res/res_pjsip/location.c,
	  res/res_pjsip_outbound_registration.c, res/res_pjsip_mwi.c,
	  res/res_pjsip/pjsip_configuration.c, include/asterisk/sorcery.h,
	  include/asterisk/strings.h,
	  res/res_pjsip/include/res_pjsip_private.h,
	  res/res_pjsip_pubsub.c, res/res_pjsip/config_transport.c:
	  res_pjsip: AMI commands and events. Created the following AMI
	  commands and corresponding events for res_pjsip:
	  PJSIPShowEndpoints - Provides a listing of all pjsip endpoints
	  and a few select attributes on each. Events: EndpointList - for
	  each endpoint a few attributes. EndpointlistComplete - after all
	  endpoints have been listed. PJSIPShowEndpoint - Provides a detail
	  list of attributes for a specified endpoint. Events:
	  EndpointDetail - attributes on an endpoint. AorDetail - raised
	  for each AOR on an endpoint. AuthDetail - raised for each
	  associated inbound and outbound auth TransportDetail - transport
	  attributes. IdentifyDetail - attributes for the identify object
	  associated with the endpoint. EndpointDetailComplete - last event
	  raised after all detail events. PJSIPShowRegistrationsInbound -
	  Provides a detail listing of all inbound registrations. Events:
	  InboundRegistrationDetail - inbound registration attributes for
	  each registration. InboundRegistrationDetailComplete - raised
	  after all detail records have been listed.
	  PJSIPShowRegistrationsOutbound - Provides a detail listing of all
	  outbound registrations. Events: OutboundRegistrationDetail -
	  outbound registration attributes for each registration.
	  OutboundRegistrationDetailComplete - raised after all detail
	  records have been listed. PJSIPShowSubscriptionsInbound - A
	  detail listing of all inbound subscriptions and their attributes.
	  Events: SubscriptionDetail - on each subscription detailed
	  attributes SubscriptionDetailComplete - raised after all detail
	  records have been listed. PJSIPShowSubscriptionsOutbound - A
	  detail listing of all outboundbound subscriptions and their
	  attributes. Events: SubscriptionDetail - on each subscription
	  detailed attributes SubscriptionDetailComplete - raised after all
	  detail records have been listed. (issue ASTERISK-22609) Reported
	  by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2959/
	  ........ Merged revisions 403131 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-23 12:52 +0000 [r403118-403120]  Joshua Colp <jcolp@digium.com>

	* res/res_stasis_playback.c, rest-api/api-docs/events.json, /,
	  res/res_stasis_recording.c, res/ari/ari_model_validators.c,
	  rest-api/api-docs/recordings.json,
	  res/ari/ari_model_validators.h: ari: Add events for playback and
	  recording. While there were events defined for playback and
	  recording these were not actually sent. This change implements
	  the to_json handlers which produces them. (closes issue
	  ASTERISK-22710) Reported by: Jonathan Rose Review:
	  https://reviewboard.asterisk.org/r/3026/ ........ Merged
	  revisions 403119 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis_snoop.exports.in (added), /,
	  include/asterisk/stasis_app_snoop.h (added),
	  rest-api/api-docs/channels.json, res/res_stasis_snoop.c (added),
	  main/audiohook.c, res/ari/resource_channels.c,
	  res/res_ari_channels.c, res/ari/resource_channels.h: ari: Add
	  Snoop operation for spying/whispering on channels. The Snoop
	  operation can be invoked on a channel to spy or whisper on it. It
	  returns a channel that any channel operations can then be invoked
	  on (such as record to do monitoring). (closes issue
	  ASTERISK-22780) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/3003/ ........ Merged
	  revisions 403117 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-23 00:22 +0000 [r403106]  Rusty Newton <rnewton@digium.com>

	* apps/app_voicemail.c: app_voicemail: when forwarding a message,
	  play vm-msgforwarded instead of vm-msgsaved In the last release
	  of sounds, 1.4.25 we added a vm-msgforwarded prompt for various
	  core languages. Now we use that prompt. (issue ASTERISK-21413)
	  (closes issue ASTERISK-21413) Reported by: netwrkr Tested by:
	  newtonr

2013-11-22 23:57 +0000 [r403095]  Kinsey Moore <kmoore@digium.com>

	* tests/test_stasis.c, /, tests/test_stasis_channels.c: Make sure
	  unit tests compile This fixes the unit tests that were broken by
	  r403069 and several functions requiring a new parameter for
	  sanitization of JSON messages generated from object snapshots.
	  ........ Merged revisions 403094 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-22 22:37 +0000 [r403083]  Kevin Harwell <kharwell@digium.com>

	* /,
	  contrib/ast-db-manage/config/versions/43956d550a44_add_tables_for_pjsip.py,
	  res/res_pjsip/pjsip_configuration.c: res_pjsip: convert
	  configuration settings names to snake case some more Updated the
	  alembic script for pjsip. Also, the dtls config parsing stuff was
	  expecting strings with no underscores, so removed the underscores
	  from the option name before passing it to the parser. ........
	  Merged revisions 403082 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-22 20:10 +0000 [r403070]  Kinsey Moore <kmoore@digium.com>

	* res/res_stasis.c, main/stasis_endpoints.c,
	  res/ari/resource_endpoints.c, main/rtp_engine.c, /,
	  res/stasis/app.c, include/asterisk/stasis_bridges.h,
	  include/asterisk/stasis.h, include/asterisk/stasis_app.h,
	  main/stasis_bridges.c, res/ari/resource_bridges.c, main/json.c,
	  main/stasis_message.c, include/asterisk/stasis_channels.h,
	  main/stasis_channels.c, res/ari/resource_channels.c,
	  include/asterisk/stasis_endpoints.h: ARI: Don't leak
	  implementation details This change prevents channels used as
	  implementation details from leaking out to ARI. It does this by
	  preventing creation of JSON blobs of channel snapshots created
	  from those channels and sanitizing JSON blobs of bridge snapshots
	  as they are created. This introduces a framework for excluding
	  information from output targeted at Stasis applications on a
	  consumer-by-consumer basis using channel sanitization callbacks
	  which could be extended to bridges or endpoints if necessary.
	  This prevents unhelpful error messages from being generated by
	  ast_json_pack. This also corrects a bug where BridgeCreated
	  events would not be created. (closes issue ASTERISK-22744)
	  Review: https://reviewboard.asterisk.org/r/2987/ Reported by:
	  David M. Lee ........ Merged revisions 403069 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-22 17:27 +0000 [r403051]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_acl.c, res/res_pjsip.c,
	  res/res_pjsip/config_transport.c, res/res_pjsip/config_global.c,
	  /, configs/pjsip.conf.sample, res/res_pjsip/config_system.c,
	  contrib/scripts/sip_to_pjsip/sip_to_pjsip.py,
	  res/res_pjsip/pjsip_configuration.c: res_pjsip: convert
	  configuration settings names to snake case Renamed, where
	  appropriate, the configuration options for chan/res_pjsip to use
	  snake case (compound words separated by an underscore). For
	  example, faxdetect will become fax_detect, recordofffeature will
	  become record_off_feature, etc... Review:
	  https://reviewboard.asterisk.org/r/3002/ ........ Merged
	  revisions 403022 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-22 17:12 +0000 [r403017]  Joshua Colp <jcolp@digium.com>

	* /, main/translate.c: translate: Move freeing of frame to after it
	  is used. When translating from one format to another it is
	  possible to inform the translation function that the source frame
	  should be freed. This was previously done immediately but shortly
	  afterwards the frame that was freed was accessed and used again.
	  This change moves code around a bit so that the frame is now
	  freed after it has been completely used. (closes issue
	  ASTERISK-22788) Reported by: Corey Farrell Patches:
	  translate-access-after-free-11up.patch uploaded by coreyfarrell
	  (license 5909) translate-access-after-free-1.8.patch uploaded by
	  coreyfarrell (license 5909) ........ Merged revisions 403014 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 403015 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 403016 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-22 16:43 +0000 [r403013]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_directed_pickup.c, CHANGES: PickupChan: Add ability to
	  specify channel uniqueids as well as channel names. * Made
	  PickupChan() search by channel uniqueids if the search could not
	  find a channel by name. * Ensured PickupChan() never considers
	  the picking channel for pickup. * Made PickupChan() option p use
	  a common search by name routine. The original search was
	  erroneously case sensitive. (issue AFS-42) Review:
	  https://reviewboard.asterisk.org/r/3017/

2013-11-21 22:38 +0000 [r402995]  Jonathan Rose <jrose@digium.com>

	* CHANGES, apps/app_directory.c: app_directory: Set variable
	  indicating reason directory exited By the time the directory
	  application exits, a channel variable DIRECTORY_RESULT will be
	  set for the channel that invoked it which can be used to
	  determine the reason for exit. The changes log and the
	  app_directory documentation contain specific details about each
	  of the possible values for DIRECTORY_RESULT. Review:
	  https://reviewboard.asterisk.org/r/3016/

2013-11-21 22:36 +0000 [r402982-402994]  David M. Lee <dlee@digium.com>

	* rest-api-templates/ari_resource.c.mustache, /,
	  rest-api-templates/res_ari_resource.c.mustache: ari: Fix #include
	  to match generated headers for snakeCase resource files ........
	  Merged revisions 402993 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* rest-api-templates/make_ari_stubs.py, /: ari: Fix generators for
	  resources with camelCase names. For the new deviceState resource,
	  we need to properly generate device_state.[ch] files. ........
	  Merged revisions 402981 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-21 19:22 +0000 [r402969]  Matthew Jordan <mjordan@digium.com>

	* res/res_pjsip_session.c, /: res_pjsip_session: Fix memory leak of
	  direct media format capabilities The direct media format
	  capabilities are always allocated in ast_sip_session_alloc and
	  were not freed in the session destructor. Whoops. (This being the
	  third whoops caught by Scott and Nitesh's valgrind work for the
	  Asterisk Test Suite. Nifty!) ........ Merged revisions 402968
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-21 19:09 +0000 [r402945-402957]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/app.h, /: voicemail: Fixup some doxygen
	  comments. ........ Merged revisions 402956 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/bucket.c: bucket: Fix scheme ref leak in
	  __ast_bucket_scheme_register(). ........ Merged revisions 402944
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-21 17:53 +0000 [r402942-402943]  Matthew Jordan <mjordan@digium.com>

	* res/res_pjsip_sdp_rtp.c, /: res_pjsip_sdp_rtp: Fix use of
	  uninitialized value in PJSIP In PJMEDIA,
	  pjmedia_sdp_rtpmap_to_attr will attempt to use the string
	  rtpmap.param regardless of its length value. Simply setting the
	  length to 0 does not prevent the garbage on the stack in
	  rtpmap.param.ptr from being formatted in a sprintf call. This
	  patch initializes the string to NULL so that at the very least,
	  something is provided to the function that is predictable.
	  ........ Merged revisions 402941 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_mwi.c: res_pjsip_mwi: Fix memory leak of MWI
	  subscriptions container This patch fixes a reference counting
	  memory leak on the ao2_container created as part of
	  create_mwi_subscriptions. When we create the container in this
	  routine, the intent is to hand lifetime ownership over to the
	  global container unsolicited_mwi. When
	  ao2_global_obj_replace_unref is called, the reference count on
	  mwi_subscriptions (the container) will be bumped by 1; however,
	  the function does not decrement the reference count on
	  mwi_subscriptions when this occurs. This will prevent the
	  container from being fully disposed of when Asterisk exits (or on
	  any subsequent call to this operation, such as during a reload).
	  ........ Merged revisions 402940 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-21 15:57 +0000 [r402928-402929]  David M. Lee <dlee@digium.com>

	* res/res_stasis.c, /: stasis: Fixed scoping problem with bridge
	  tracking. ........ Merged revisions 402817 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/ari/resource_channels.c, res/res_ari_channels.c,
	  res/ari/resource_channels.h, /, res/stasis/control.c,
	  include/asterisk/stasis_app.h, rest-api/api-docs/channels.json:
	  ari: Add silence generator controls This patch adds the ability
	  to start a silence generator on a channel via ARI. This generator
	  will play silence on the channel (avoiding audio timeouts on the
	  peer) until it is stopped, or some other media operation is
	  started (like playing media, starting music on hold, etc.).
	  (closes issue ASTERISK-22514) Review:
	  https://reviewboard.asterisk.org/r/3019/ ........ Merged
	  revisions 402926 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-19 23:17 +0000 [r402892]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip_caller_id.c: res_pjsip_caller_id: Don't
	  overwrite user portion of the From header when fromuser is set.
	  The fromuser option is used to explicitly set the user within the
	  From header. The res_pjsip_caller_id module did not take this
	  setting into account when determining if the From header could be
	  modified or not. (closes issue ASTERISK-22866) Reported by:
	  Anthony Messina ........ Merged revisions 402891 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-16 13:51 +0000 [r402865]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip/pjsip_distributor.c, /, configure,
	  include/asterisk/autoconfig.h.in, configure.ac: res_pjsip: Add
	  support for building against pjproject with SIP transaction group
	  lock support. SIP transaction group lock support has been
	  backported into our pjproject. Since the code now internally uses
	  a group lock the code is now changed to unlock it if present.
	  Note that the act of finding the transaction is what actually
	  returns it locked. For further information about group locks
	  check out the wiki page at:
	  http://trac.pjsip.org/repos/wiki/Group_Lock (issue
	  ASTERISK-22818) Reported by: Matt Jordan ........ Merged
	  revisions 402864 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-15 22:38 +0000 [r402854]  Jonathan Rose <jrose@digium.com>

	* apps/app_confbridge.c, CHANGES,
	  apps/confbridge/conf_config_parser.c,
	  configs/confbridge.conf.sample,
	  apps/confbridge/include/confbridge.h: Confbridge: Add option to
	  review the recording similar to announce_join_leave Review:
	  https://reviewboard.asterisk.org/r/3008/

2013-11-15 14:37 +0000 [r402839]  Kinsey Moore <kmoore@digium.com>

	* /, main/cel.c: CEL: Fix crash when using CELGenUserEvent This
	  fixes a crash when CELGenUserEvent is called from the dialplan
	  while CEL is disabled. Currently, CEL does not create its topics
	  and forwards if it is not enabled and external entities may
	  depend on these topics blindly since they should always be
	  available. This patch breaks up route creation and topic/forward
	  creation such that the CEL topics and forwards will always exist
	  while the router and its associated routes will be torn down and
	  recreated as necessary. (closes issue ASTERISK-22799) Review:
	  https://reviewboard.asterisk.org/r/3010/ Reported by: Matt Jordan
	  ........ Merged revisions 402838 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-14 21:36 +0000 [r402820-402829]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_directed_pickup.c: Pickup: Pickup() and PickupChan()
	  parameter parsing improvements. * Made Pickup() and PickupChan()
	  tollerate empty pickup values. i.e., You can now have
	  Pickup(&&exten@context). * Made PickupChan() use the standard
	  option flag parsing code.

	* apps/app_directed_pickup.c: Pickup: Ensure using PICKUPMARK never
	  considers the picking channel.

2013-11-14 20:32 +0000 [r402819]  Jonathan Rose <jrose@digium.com>

	* CHANGES, main/pbx.c, apps/app_sayunixtime.c: Say: If
	  SAY_DTMF_INTERRUPT is set to an ast_true value, jump on DTMF
	  Similar to how background works, if a say application is called
	  with this variable set to 'true', 'yes', 'on', etc. then using
	  DTMF while the say action is in progress will result in the
	  channel jumping to that extension in the dialplan. Review:
	  https://reviewboard.asterisk.org/r/3011/

2013-11-13 23:11 +0000 [r402805]  Joshua Colp <jcolp@digium.com>

	* rest-api/api-docs/channels.json, res/ari/resource_channels.c,
	  res/res_ari_channels.c, res/ari/resource_channels.h, /,
	  res/stasis/control.c, include/asterisk/stasis_app.h:
	  res_ari_channels: Add the ability to stop locally generated
	  ringing on a channel. Using the 'ring' operation it is possible
	  to start locally generated ringback if the channel is answered.
	  This change adds the ability to stop it by using DELETE. ........
	  Merged revisions 402804 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-12 23:17 +0000 [r402788-402795]  Kevin Harwell <kharwell@digium.com>

	* res/ari/resource_endpoints.c, /: ari endpoints: GET
	  /ari/endpoints/{invalid-tech} should return a 404 Was returning a
	  404 on a valid technology with an empty list of endpoints. Now
	  checking against the channel tech to make sure the tech itself is
	  valid and not just an empty list of endpoints. (issue
	  ASTERISK-22803) Reported by: David M. Lee ........ Merged
	  revisions 402793 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* rest-api/api-docs/endpoints.json, res/ari/resource_endpoints.c,
	  /, res/res_ari_endpoints.c: ari endpoints: GET
	  /ari/endpoints/{invalid-tech} should return a 404 Implementation
	  listing endpoints by technology returned an empty array if no
	  matching endpoints were found. Fixed so a "404 Not Found" will be
	  returned instead. (closes issue ASTERISK-22803) Reported by:
	  David M. Lee ........ Merged revisions 402787 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-12 19:38 +0000 [r402768-402778]  Mark Michelson <mmichelson@digium.com>

	* /, main/channel.c: Switch to a scoped lock to avoid missing
	  unlocks in failure returns. ........ Merged revisions 402769 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/channel.c, /: Move a NULL check to a place that makes more
	  sense. Two variables were being checked for NULLity immediately
	  after being declared NULL. I moved the NULL check until after the
	  variables are allocated. This allows for the "channelvars" option
	  in manager.conf to work as intended again. ........ Merged
	  revisions 402767 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-12 16:49 +0000 [r402758]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_messaging.c, res/res_pjsip_header_funcs.c, /:
	  pjsip_messaging, pjsip_header_funcs: Crashes due to NULL pointer
	  dereferences Both res_pjsip_messaging and res_pjsip_header_funcs
	  were causing asterisk to crash because they were trying to
	  dereference a NULL pointer. In the case of res_pjsip_messaging it
	  was attempting to "print" a contact header that did not exist. In
	  fact contact headers should not be part of a SIP MESSAGE, so the
	  offending code was simply removed. In the case of
	  res_pjsip_header_funcs a null private channel tech was being
	  passed to the function and then later dereferenced. Added null
	  checks (and error logging) to the read/write function handlers to
	  guard against crashing. (closes issue ASTERISK-22821) Reported
	  by: Anthony Messina ........ Merged revisions 402757 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-12 16:34 +0000 [r402756]  Kinsey Moore <kmoore@digium.com>

	* /, apps/app_celgenuserevent.c: CELGenUserEvent: Fix error message
	  from ast_json_pack This prevents NULL from being passed into an
	  ast_json_pack call when no extra information is passed to the
	  application which prevents an error message about NULL arguments
	  from being generated. ........ Merged revisions 402755 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-12 15:27 +0000 [r402741]  David M. Lee <dlee@digium.com>

	* res/ari/ari_model_validators.h, rest-api/api-docs/events.json, /:
	  Fixed a typ. ........ Merged revisions 402738 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-12 15:03 +0000 [r402711]  Kinsey Moore <kmoore@digium.com>

	* channels/chan_dahdi.c, /: chan_dahdi: Fix crash during caller ID
	  read Asterisk will sometimes core dump during caller id read on
	  analog channels due to a negative return value from the read() in
	  my_get_callerid that slips through as a negative length argument
	  to callerid_feed() if the errno returned by DAHDI is ELAST. This
	  change ensures that the negative return is treated properly even
	  when it is ELAST. (closes issue ASTERISK-22746) Reported by:
	  Michael Walton Patches: chan_dahdi_cid_crash_fix.r401410.patch
	  uploaded by Michael Walton (License 6502) ........ Merged
	  revisions 402708 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 402709 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402710 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-11 20:28 +0000 [r402698]  Jonathan Rose <jrose@digium.com>

	* apps/app_confbridge.c: Confbridge: add test events for dynamic
	  menus test Adds a couple of test events for conference menu
	  actions so that it's easy to discern when those menu actions have
	  been triggered. (issue ASTERISK-22760) Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/2999/

2013-11-11 19:31 +0000 [r402688]  Mark Michelson <mmichelson@digium.com>

	* apps/app_confbridge.c, /: Get rid of some inaccurate comments.
	  I'm doing some unrelated work in app_confbridge and finding these
	  "invalid pin" comments to be annoying. Get out! ........ Merged
	  revisions 402686 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402687 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-11 15:37 +0000 [r402648]  Kinsey Moore <kmoore@digium.com>

	* /, apps/app_queue.c: app_queue: Honor penalty limits of 0 In the
	  current app_queue code from 1.8 up to trunk the upper and lower
	  penalties can be set to 0 but the value is interpreted to be
	  disabled instead of actually setting limits. This is especially
	  evident if min and max limits are set to 0 and members with
	  penalties of 0 and 1 are in the queue since the member with
	  penalty 1 will still receive calls. This patch adjusts the
	  special disabled value to be INT_MAX instead of 0. (closes issue
	  ASTERISK-20862) Review: https://reviewboard.asterisk.org/r/2995/
	  Reported by: Schmooze Com ........ Merged revisions 402645 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 402646 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402647 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-08 23:07 +0000 [r402607]  Scott Griepentrog <sgriepentrog@digium.com>

	* /, channels/chan_sip.c, channels/sip/include/sip.h: chan_sip:
	  keep same local (from) tag for outgoing register requests For
	  outbound register requests the tag on the From line was updated
	  every 20 seconds prior to a successful registration and also once
	  for each registration renewal. That behavior can possibly cause
	  the registration to be denied because of the different tag, and
	  is not aligned with the intention of RFC 3261 8.1.3.5 "...
	  request constitutes a new transaction and SHOULD have the same
	  value of the Call-ID, To, and From of the previous request...".
	  This updates chan_sip to have a field to keep the local tag in
	  the registration structure and use that tag for registration
	  requests where the callid is also unchanged. (closes issue
	  ASTERISK-12117) Reported by: Pawel Pierscionek Review:
	  https://reviewboard.asterisk.org/r/2988/ ........ Merged
	  revisions 402604 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 402605 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402606 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-08 20:37 +0000 [r402595]  Richard Mudgett <rmudgett@digium.com>

	* /, res/res_stasis.c: res_stasis.c: Fix locking issues with the
	  app_bridge_moh container. * Fix unlinking from the
	  app_bridges_moh container in remove_bridge_moh() without a lock
	  under normal circumstances. * Made check
	  ast_bridge_set_after_callback() return value in
	  bridge_moh_create() to handle failure. * Fixed SCOPED_AO2LOCK()
	  locking over too much scope in stasis_app_bridge_moh_channel()
	  and stasis_app_bridge_moh_stop(). * Fixed unusual usage of
	  ao2_unlink_flag() in control_unlink(). * Fixed orphaned bridge
	  from off nominal path in stasis_app_bridge_create(). * Fixed
	  strange construct in stasis_app_unsubscribe(). From a bad merge?
	  * Made load_module() cleanup on failure. Review:
	  https://reviewboard.asterisk.org/r/2962/ ........ Merged
	  revisions 402593 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-08 19:33 +0000 [r402585]  Jonathan Rose <jrose@digium.com>

	* /, main/security_events.c, configs/manager.conf.sample, CHANGES,
	  include/asterisk/manager.h, main/manager.c: security_events: Push
	  out security events over AMI events Security Events will now be
	  written to any listener of the new 'security' class Review:
	  https://reviewboard.asterisk.org/r/2998/ ........ Merged
	  revisions 402584 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-08 19:22 +0000 [r402583]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip.c, /: Clarify an ambiguous error message. ........
	  Merged revisions 402582 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-08 18:53 +0000 [r402571-402572]  David M. Lee <dlee@digium.com>

	* /, res/res_pjsip/config_system.c: res_pjsip: Print a helpful
	  error message if sorcery registration fails ........ Merged
	  revisions 402570 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/ari/resource_playbacks.h, /: Changes from make ari-stubs
	  after r402560 ........ Merged revisions 402561 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-08 17:59 +0000 [r402562]  Kevin Harwell <kharwell@digium.com>

	* rest-api/resources.json, res/ari/resource_playback.h (removed),
	  res/res_ari_playbacks.c (added), res/ari/resource_playbacks.h
	  (added), /, res/ari.make, rest-api/api-docs/playback.json
	  (removed), res/ari/resource_playback.c (removed),
	  res/res_ari_playback.c (removed),
	  rest-api/api-docs/playbacks.json (added),
	  res/ari/resource_playbacks.c (added): ARI playback: Rename ARI
	  Playback to Playbacks Before playback was the only non plural
	  resource. It has been renamed to playbacks for consistency.
	  (closes issue ASTERISK-22737) Reported by: Paul Belanger ........
	  Merged revisions 402560 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-08 17:29 +0000 [r402557]  David M. Lee <dlee@digium.com>

	* res/res_ari.c, main/manager.c, /, main/http.c: ari: Add
	  application/x-www-form-urlencoded parameter support ARI POST
	  calls only accept parameters via the URL's query string. While
	  this works, it's atypical for HTTP API's in general, and
	  specifically frowned upon with RESTful API's. This patch adds
	  parsing for application/x-www-form-urlencoded request bodies if
	  they are sent in with the request. Any variables parsed this way
	  are prepended to the variable list supplied by the query string.
	  (closes issue ASTERISK-22743) Review:
	  https://reviewboard.asterisk.org/r/2986/ ........ Merged
	  revisions 402555 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-08 14:58 +0000 [r402546]  Kevin Harwell <kharwell@digium.com>

	* apps/app_dahdiras.c, utils/extconf.c, main/asterisk.c:
	  app_dahdiras: Use waitpid instead of wait4. Several places in the
	  code were using wait4 while other places were using waitpid. This
	  change makes all places use waitpid in order to make things more
	  consistent and since the 'rusage' object passed in/out of wait4
	  was never used. (closes issue ASTERISK-22557) Reported by:
	  YvesGael Patches: asterisk-11.5.1-wait4.patch uploaded by hurdman
	  (license 6537)

2013-11-07 23:42 +0000 [r402538]  Jonathan Rose <jrose@digium.com>

	* res/res_pjsip_authenticator_digest.c, /: PJSIP: Improve error
	  handling in digest authenticator Previously, regardless of
	  whether failure to authenticate was due to lacking any
	  authentication or actually failing authentication, the Digest
	  Authenticator would simply return that a challenge was still
	  needed. It will continue to do that when no authentication
	  information is in the received SIP digest, but when
	  authentication information is present and does not pass
	  authentication, that will be treated as an authentication error.
	  This is to ensure that PJSIP will issue security events indicated
	  failed auths. ........ Merged revisions 402537 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-07 21:10 +0000 [r402529]  David M. Lee <dlee@digium.com>

	* res/ari/resource_applications.c, res/ari/resource_playback.c,
	  rest-api/api-docs/channels.json, res/ari/resource_applications.h,
	  res/ari/resource_channels.c, res/ari/resource_playback.h,
	  rest-api/api-docs/recordings.json, res/ari/resource_recordings.c,
	  rest-api-templates/ari_resource.c.mustache,
	  rest-api-templates/asterisk_processor.py,
	  res/ari/resource_channels.h, rest-api/api-docs/endpoints.json,
	  res/ari/resource_endpoints.c, res/ari/resource_recordings.h,
	  res/ari/resource_events.c, res/res_ari_playback.c,
	  res/res_ari_applications.c, res/ari/resource_endpoints.h,
	  res/ari/resource_events.h, rest-api/api-docs/sounds.json,
	  res/ari/resource_sounds.c, res/res_ari_channels.c,
	  rest-api/api-docs/bridges.json, res/ari/resource_bridges.c,
	  res/ari/resource_sounds.h, res/res_ari_recordings.c,
	  res/ari/resource_bridges.h, rest-api/api-docs/asterisk.json,
	  res/ari/resource_asterisk.c, res/res_ari_endpoints.c,
	  rest-api/api-docs/applications.json,
	  rest-api/api-docs/playback.json, res/res_ari_events.c,
	  res/ari/resource_asterisk.h, rest-api-templates/swagger_model.py,
	  res/res_ari_sounds.c, res/res_ari_bridges.c, /,
	  rest-api-templates/ari_resource.h.mustache,
	  rest-api-templates/rest_handler.mustache, res/res_ari_asterisk.c,
	  rest-api-templates/res_ari_resource.c.mustache: ari: User better
	  nicknames for ARI operations While working on building client
	  libraries from the Swagger API, I noticed a problem with the
	  nicknames. channel.deleteChannel() channel.answerChannel()
	  channel.muteChannel() Etc. We put the object name in the nickname
	  (since we were generating C code), but it makes OO generators
	  redundant. This patch makes the nicknames more OO friendly. This
	  resulted in a lot of name changing within the res_ari_*.so
	  modules, but not much else. There were a couple of other fixed I
	  made in the process. * When reversible operations (POST /hold,
	  POST /unhold) were made more RESTful (POST /hold, DELETE
	  /unhold), the path for the second operation was left in the API
	  declaration. This worked, but really the two operations should
	  have been on the same API. * The POST /unmute operation had still
	  not been REST-ified. Review:
	  https://reviewboard.asterisk.org/r/2940/ ........ Merged
	  revisions 402528 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-06 21:58 +0000 [r402518]  Kevin Harwell <kharwell@digium.com>

	* /, apps/app_queue.c: app_queue: crash if first agent is "busy" If
	  the first agent/member (via CLI "queue show") in a queue is
	  "busy" (dnd, circuit busy, etc...) and no agents answered then
	  app_queue would crash. This occurred because while the calling of
	  agent(s) remained valid the channel on "busy" agent would be set
	  to NULL and then later dereferenced upon a second "rna" function
	  call. The original intention of the code is to have only valid
	  "call attempt" objects (channels != NULL) checked while
	  attempting to call agent(s). It does this by building a
	  "call_next" list of valid "call attempt" objects. In the case of
	  the "busy" agent subsequent builds of the valid "call attempt"
	  list would sometimes include (the case mentioned above) an
	  invalid "call attempt" object. The fix was to make sure the "call
	  attempt" list was appropriately built on every iteration. A NULL
	  sanity check was also added at the original offending spot of the
	  crash just in case another one slipped by somehow. (closes issue
	  ASTERISK-22644) Reported by: Marco Signorini Review:
	  https://reviewboard.asterisk.org/r/2983/ ........ Merged
	  revisions 402517 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-05 21:17 +0000 [r402502-402508]  Matthew Jordan <mjordan@digium.com>

	* /, channels/chan_sip.c: chan_sip: Use AST_AF* defined constant
	  when calling ast_get_ip While the structure passed to ast_get_ip
	  should be set memset to 0, thus initializing the ss_family member
	  to 0, explicitly setting it to AST_AF_UNSPEC is more portable.
	  ........ Merged revisions 402507 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_iax2.c, /: chan_iax2: Fix incorrect usage of
	  ast_get_ip involving uninitialized struct This started off as a
	  fix for the failing IAX2 acl_call test in the Asterisk Test
	  Suite. When inspecting why that test was failing, it became clear
	  that all attempts to bind to any local loopback address was
	  failing: [Nov 2 15:56:28] VERBOSE[15787] chan_iax2.c: == Binding
	  IAX2 to address 127.0.0.1:4569 [Nov 2 15:56:28] DEBUG[15787]
	  netsock2.c: Splitting '127.0.0.1' into... [Nov 2 15:56:28]
	  DEBUG[15787] netsock2.c: ...host '127.0.0.1' and port ''. [Nov 2
	  15:56:28] ERROR[15787] netsock2.c: getaddrinfo("127.0.0.1",
	  "(null)", ...): ai_family not supported [Nov 2 15:56:28]
	  WARNING[15787] acl.c: Unable to lookup '127.0.0.1' While there's
	  conceivably other ways for getaddrino to return EAI_FAMILY, the
	  most common way is if AF_INET, AF_INET6, or AF_UNSPEC is not
	  provided as the desired family. The culprit was the call to
	  ast_get_ip, defined in acl.h. This function uses the family from
	  the passed in addr object (which it will also populate when it
	  returns!) when it eventually calls getaddrinfo. This patch fixes
	  the use of ast_get_ip that were not specifying the family in
	  chan_iax2. This prevents uninitialized use of the structure, so
	  that the addresses resolve correctly. Review:
	  https://reviewboard.asterisk.org/r/2991 ........ Merged revisions
	  402505 from http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/acl.h, /, include/asterisk/netsock2.h: netsock2:
	  Define AST_AF_* enum constants to their AF_* equivalents This
	  patch explicitly defines AST_AF_* enum constants to their
	  sys/socket.h defined equivalents. It is certainly unclear why
	  these constants actually have to exist, given that netsock2.h
	  includes sys/socket.h; however, since the code base is already
	  liberally sprinkled with the usage of AST_AF_* (as well as with
	  direct calls to AF_*), this will at least keep the semantics
	  consistent between their usage across systems. ........ Merged
	  revisions 402503 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis_channels.c, /: stasis_channels: Don't give preference
	  to ANI info in channel snapshots When publishing channel
	  snapshots, we currently compute the caller ID name and number by
	  giving preference first to ani.{name|number}, then to
	  id.{name|number}. However, when a channel driver (such as
	  chan_sip) updates the caller ID, it typically only updates the
	  caller ID stored in id.{name|number}. This means that we are
	  currently giving preference to stale information. When looking at
	  the rest of the code base, the only other place where we appear
	  to use this same logic is in app_amd. Everywhere else, we treat
	  the party information in ani as being separate to the party
	  information in id. This patch publishes only the caller ID name
	  and number in the snapshot field for caller_name and caller_num.
	  Note that the information in ANI is still available in
	  caller_ani. Review: https://reviewboard.asterisk.org/r/2992/
	  ........ Merged revisions 402501 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-04 21:02 +0000 [r402453]  Kevin Harwell <kharwell@digium.com>

	* /, channels/chan_sip.c: chan_sip: notify dialog info ignores
	  presentation indicator in callerid The presentation indicator in
	  a callerid (e.g. set by dialplan function
	  Set(CALLERID(name-pres)= ...)) is not checked when SIP Dialog
	  Info Notifies are generated during extension monitoring. Added a
	  check to make sure the name and/or number presentations on the
	  callee (remote identity) are set to allow. If they are restricted
	  then "anonymous" is used instead. (closes issue AST-1175)
	  Reported by: Thomas Arimont Review:
	  https://reviewboard.asterisk.org/r/2976/ ........ Merged
	  revisions 402450 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402452 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-02 04:30 +0000 [r402406-402439]  Richard Mudgett <rmudgett@digium.com>

	* main/stasis.c, main/stasis_message_router.c, /,
	  include/asterisk/vector.h: vector: Uppercase API to follow C
	  convention. C does not support templates like C++. ........
	  Merged revisions 402438 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/lock.h, main/stasis.c,
	  main/stasis_message_router.c, /, include/asterisk/vector.h:
	  vector: Update API to be more flexible. Made the vector macro API
	  be more like linked lists. 1) Added a name parameter to
	  ast_vector() to name the vector struct. 2) Made the API take a
	  pointer to the vector struct instead of the struct itself. 3)
	  Added an element cleanup macro/function parameter when removing
	  an element from the vector for ast_vector_remove_cmp_unordered()
	  and ast_vector_remove_elem_unordered(). 4) Added
	  ast_vector_get_addr() in case the vector element is not a simple
	  pointer. * Converted an inline vector usage in
	  stasis_message_router to use the vector API. It needed the API
	  improvements so it could be converted. * Fixed topic reference
	  leak in router_dtor() when the stasis_message_router is
	  destroyed. * Fixed deadlock potential in stasis_forward_all() and
	  stasis_forward_cancel(). Locking two topics at the same time
	  requires deadlock avoidance. * Made internal_stasis_subscribe()
	  tolerant of a NULL topic. * Made stasis_message_router_add(),
	  stasis_message_router_add_cache_update(),
	  stasis_message_router_remove(), and
	  stasis_message_router_remove_cache_update() tolerant of a NULL
	  message_type. * Promoted a LOG_DEBUG message to LOG_ERROR as
	  intended in dispatch_message(). Review:
	  https://reviewboard.asterisk.org/r/2903/ ........ Merged
	  revisions 402429 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/confbridge/conf_state_single.c,
	  apps/confbridge/conf_state_inactive.c,
	  apps/confbridge/conf_state_single_marked.c, /,
	  apps/confbridge/include/confbridge.h,
	  apps/confbridge/conf_state_multi.c, apps/app_confbridge.c,
	  apps/confbridge/conf_state_multi_marked.c,
	  apps/confbridge/conf_state.c: confbridge: Separate user muting
	  from system muting overrides. The system overrides the user
	  muting requests when MOH is playing or a waitmarked user is
	  waiting for a marked user to join. System muting overrides
	  interfere with what the user may wish the muting to be when the
	  system override ends. * User muting requests are now independent
	  of the system muting overrides. The effective muting is now the
	  logical or of the user request and system override. * Added a
	  Muted flag to the CLI "confbridge list <conference>" command. *
	  Added a Muted header to the AMI ConfbridgeList action
	  ConfbridgeList event. (closes issue AST-1102) Reported by: John
	  Bigelow Review: https://reviewboard.asterisk.org/r/2960/ ........
	  Merged revisions 402425 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402427 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/config.c, apps/confbridge/conf_config_parser.c,
	  configs/confbridge.conf.sample, /: config: Allow ConfBridge DTMF
	  menus to have '#' as the first digit. ConfBridge allows custom
	  DTMF menus to be created in the confbridge.conf file by assigning
	  a DTMF key sequence to a sequence of actions as follows:
	  DTMF-sequence = action,action... Unfortunately, the normal config
	  file processing code interprets an initial '#' character as
	  starting a directive such as #include. * Add the ability to
	  escape the first non-blank character in a config line so the '#'
	  character can be used without triggering the directive processing
	  code. (closes issue AFS-2) (closes issue ASTERISK-22478) Reported
	  by: Nicolas Tanski Patches: jira_asterisk_22478_v11.patch
	  (license #5621) patch uploaded by rmudgett (modified) Review:
	  https://reviewboard.asterisk.org/r/2969/ ........ Merged
	  revisions 402407 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402416 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/app.h, /, main/app.c: voicemail: Simplify
	  callback pointer declarations and add doxygen. * Typedefed and
	  added doxegen for the voicemail callback functions. * Simplified
	  the prototypes for ast_install_vm_functions() and
	  ast_install_vm_test_functions() to use the new function typedefs.
	  * Simplified the voicemail callback function pointer variable
	  declarations to use the new function typedefs. ........ Merged
	  revisions 402398 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-01 22:48 +0000 [r402397]  Jonathan Rose <jrose@digium.com>

	* apps/confbridge/conf_config_parser.c,
	  apps/confbridge/include/confbridge.h, apps/app_confbridge.c,
	  CHANGES: app_confbridge: Make the CONFBRIDGE function be able to
	  create dynamic menus Also adds the ability to clear all profile
	  items and makes behavior more consistent with documentation as
	  when choosing whether to use CONFBRIDGE datastore profiles or the
	  application arguments to the confbridge application. (closes
	  issue ASTERISK-22760) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2971/

2013-11-01 21:51 +0000 [r402388]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/manager_bridges.c, /, main/bridge.c,
	  include/asterisk/bridge.h: Manager: Add equivalent AMI actions
	  for the bridge CLI commands. Adds the following AMI events,
	  closely following their CLI counterparts: BridgeDestroy
	  BridgeKick BridgeTechnologyList BridgeTechnologySuspend
	  BridgeTechnologyUnsuspend BridgeDestroy kicks an entire bridge,
	  where BridgeKick kicks just one channel off the bridge. When
	  kicking a channel, specifying the bridge also (optional) insures
	  it is not removed from the wrong bridge. The BridgeTechnology
	  events allow viewing and changing suspension status, which
	  affects only subsequent not active bridging. (closes
	  ASTERISK-22356) Reported by: Richard Mudgett Review:
	  https://reviewboard.asterisk.org/r/2973/ ........ Merged
	  revisions 402387 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-01 16:31 +0000 [r402368]  David M. Lee <dlee@digium.com>

	* /, rest-api-templates/api.wiki.mustache: ari wiki docs: add notes
	  about allowMultiple parameters. This patch adds a note to any
	  parameter that has 'allowMultiple' set in the Swagger
	  documentation. (closes issue ASTERISK-22704) ........ Merged
	  revisions 402367 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-01 14:38 +0000 [r402359]  Joshua Colp <jcolp@digium.com>

	* include/asterisk/stasis_app.h, rest-api/api-docs/channels.json,
	  res/ari/resource_channels.c, res/res_ari_channels.c,
	  res/ari/resource_channels.h, res/res_stasis_playback.c, /,
	  res/stasis/control.c: res_ari_channels: Add ring operation, dtmf
	  operation, hangup reasons, and tweak early media. The ring
	  operation sends ringing to the specified channel it is invoked
	  on. The dtmf operation can be used to send DTMF digits to the
	  specified channel of a specific length with a wait time in
	  between. Finally hangup reasons allow you to specify why a
	  channel is being hung up (busy, congestion). Early media behavior
	  has also been tweaked slightly. When playing media to a channel
	  it will no longer automatically answer. If it has not been
	  answered a progress indication is sent instead. (closes issue
	  ASTERISK-22701) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2916/ ........ Merged
	  revisions 402358 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-01 12:40 +0000 [r402349]  Kinsey Moore <kmoore@digium.com>

	* res/res_rtp_asterisk.c, /, channels/chan_sip.c,
	  include/asterisk/rtp_engine.h: chan_sip: Fix RTCP port for SRFLX
	  ICE candidates This corrects one-way audio between Asterisk and
	  Chrome/jssip as a result of Asterisk inserting the incorrect RTCP
	  port into RTCP SRFLX ICE candidates. This also exposes an ICE
	  component enumeration to extract further details from candidates.
	  (closes issue ASTERISK-21383) Reported by: Shaun Clark Review:
	  https://reviewboard.asterisk.org/r/2967/ ........ Merged
	  revisions 402345 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402348 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-11-01 12:33 +0000 [r402337-402347]  Joshua Colp <jcolp@digium.com>

	* /, include/asterisk/stasis_app.h, res/ari/resource_channels.c:
	  res_ari_channels: Fix a deadlock when originating multiple
	  channels close to eachother. If a Stasis application is specified
	  an implicit subscription is done on the originated channel. This
	  was previously done with the channel lock held which is dangerous
	  as the underlying code locks the container and iterates items.
	  This change releases the lock on the originated channel before
	  subscribing occurs. (closes issue ASTERISK-22768) Reported by:
	  Matt Jordan Review: https://reviewboard.asterisk.org/r/2979/
	  ........ Merged revisions 402346 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/stasis/control.c: res_stasis: Ensure the channel is always
	  departed from the bridge when it leaves. This change adds a
	  command to the command queue to explicitly depart the channel
	  from the bridge when it is told it has left. If the channel has
	  already been departed or has entered a different bridge this
	  command will become a no-op. (closes issue ASTERISK-22703)
	  Reported by: John Bigelow (closes issue ASTERISK-22634) Reported
	  by: Kevin Harwell Review:
	  https://reviewboard.asterisk.org/r/2965/ ........ Merged
	  revisions 402336 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-31 22:09 +0000 [r402328]  Mark Michelson <mmichelson@digium.com>

	* /, contrib/scripts/sip_to_pjsip/sip_to_pjsip.py,
	  contrib/scripts/sip_to_res_sip (removed),
	  contrib/scripts/sip_to_pjsip (added),
	  contrib/scripts/sip_to_pjsip/astconfigparser.py,
	  contrib/scripts/sip_to_pjsip/astdicts.py: Update the conversion
	  script from sip.conf to pjsip.conf (closes issue ASTERISK-22374)
	  Reported by Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2846 ........ Merged revisions
	  402327 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-31 16:06 +0000 [r402286-402290]  Matthew Jordan <mjordan@digium.com>

	* main/loader.c, /: core/loader: Don't call dlclose in a while loop
	  For awhile now, we've noticed continuous integration builds
	  hanging on CentOS 6 64-bit build agents. After resolving a number
	  of problems with symbols, strange locks, and other shenanigans,
	  the problem has persisted. In all cases, gdb shows the Asterisk
	  process stuck in loader.c on one of the infinite while loops that
	  calls dlclose repeatedly until success. The documentation of
	  dlclose states that it returns 0 on success; any other value on
	  error. It does not state that repeatedly calling it will
	  eventually clear those errors. Most likely, the repeated calls to
	  dlclose was to force a close by exhausting the references on the
	  library; however, that will never succeed if: (a) There is some
	  fundamental error at work in the loaded library that precludes
	  unloading it (b) Some other loaded module is referencing a symbol
	  in the currently loaded module This results in Asterisk sitting
	  forever. Since we have matching pairs of dlopen/dlclose, this
	  patch opts to only call dlclose once, and log out as an ERROR if
	  dlclose fails to return success. If nothing else, this might help
	  to determine why on the CentOS 6 64-bit build agent things are
	  not closing successfully. Review:
	  https://reviewboard.asterisk.org/r/2970 ........ Merged revisions
	  402287 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 402288 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402289 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/media_index.c, /: medix_index: Display errors when library
	  calls fail Based on feedback from ipengineer in #asterisk, when
	  the media indexer cannot access a sound file on the system (or
	  otherwise fails) Asterisk displays a "Cannot frob file" error but
	  fails to tell you why. This is especially problematic as the
	  media_indexer failing will rpevent Asterisk from starting, as it
	  is in the core. We now display the errno error messages so folks
	  can figure out what they've done wrong. ........ Merged revisions
	  402285 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-31 14:45 +0000 [r402277]  David M. Lee <dlee@digium.com>

	* /, res/stasis/app.c: stasis: add functions embarrassingly missing
	  from r400522 I neglected to implement two of the endpoint
	  subscription functions when I did the work. Normally, you'll only
	  hit that when you unsubscribe from a specific endpoint. ........
	  Merged revisions 402276 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-30 17:54 +0000 [r402266]  Kevin Harwell <kharwell@digium.com>

	* channels/chan_pjsip.c, /, res/res_pjsip_messaging.c:
	  pjsip_messaging: Added debug for in dialog messaging (issue
	  ASTERISK-22777) Reported by: Matt Jordan ........ Merged
	  revisions 402265 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-29 23:43 +0000 [r402227]  Rusty Newton <rnewton@digium.com>

	* /, sounds/Makefile: Updates for 1.4.25 core sounds and 1.4.14
	  extra sounds, plus new en_GB language set The new sound packages
	  relate to issues: ASTERISK-22544, ASTERISK-22411, ASTERISK-21413,
	  ASTERISK-20782 Modified sounds/Makefile for the new sound
	  versions and to account for the new en_GB language set. (issue
	  ASTERISK-22659) (closes issue ASTERISK-22659) (closes issue
	  ASTERISK-22411) (closes issue ASTERISK-22544) ........ Merged
	  revisions 402224 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 402225 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402226 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-29 12:57 +0000 [r402155]  Matthew Jordan <mjordan@digium.com>

	* main/xmldoc.c, main/channel.c, main/pbx.c, /, main/translate.c:
	  Remove some spammy debug messages; improve clarity of others
	  Debug messages aren't free. Even when the debug level is
	  sufficiently low such that the messages are never evaluated,
	  there is a cost to having to parse Asterisk logs that contain
	  debug messages that (a) fail to convey sufficient information or
	  (b) occur so frequently as to be next to meaningless. Based on
	  having to stare at lots of DEBUG messages, this patch makes the
	  following changes: * channel.c: When copying variables from a
	  parent channel to a child channel, specify the channels involved.
	  Do not log anything for a variable that is not inherited; the
	  fact that it doesn't have an _ or __ already signifies that it
	  won't be inherited. * pbx.c: Specify what function evaluation has
	  occurred that created the result. * translate.c: Bump up the
	  translator path messages to 10. I've never once had to use these
	  debug messages, and for each format that is registered (on
	  startup) and unregistered (on shutdown) the entire f^2 matrix is
	  logged out. For short tests in the Asterisk Test Suite, this
	  should make finding the actual test much easier. * xmldoc.c: The
	  debug message that 'blah' is not found in the tree is expected.
	  Often, description elements - which are not required - are not
	  provided. This debug message adds no additional value, as it is
	  not indicative of an error or helpful in debugging which element
	  did not contain a 'blah' element as a child. If an element is
	  supposed to contain a child element, then that XML tree should
	  have failed validation in the first place. Review:
	  https://reviewboard.asterisk.org/r/2966/ ........ Merged
	  revisions 402150 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 402151 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402154 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-29 12:51 +0000 [r402149-402153]  Kinsey Moore <kmoore@digium.com>

	* rest-api/api-docs/channels.json, res/ari/resource_channels.c,
	  res/res_ari_channels.c, res/ari/resource_channels.h, /: ARI:
	  Remove channels/{channelId}/dial This removes the
	  /ari/channels/{channelId}/dial URI since it is redundant, overly
	  complex, is likely to become more externally complex over time,
	  and is too high-level compared with other ARI operations. See the
	  following for further information:
	  http://lists.digium.com/pipermail/asterisk-app-dev/2013-October/000002.html
	  (closes issue ASTERISK-22784) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2968/ ........ Merged
	  revisions 402152 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* bridges/bridge_native_rtp.c, /: bridge_native_rtp: Ensure bridge
	  is torn down When a bridge transitions away from one tech to
	  another, the tech going away is provided a dummy bridge with no
	  channels in it to tear down. Currently this means that the
	  teardown code exits prematurely and does not tear anything down.
	  This change tears down RTP bridging for the channel provided in
	  the leave bridge tech callback. This also reverts the majority of
	  r400403 since it is now redundant. (closes issue ASTERISK-22628)
	  (closes issue ASTERISK-22676) Reported by: John Bigelow Reported
	  by: Kevin Harwell Tested by: John Bigelow Review:
	  https://reviewboard.asterisk.org/r/2905/ Patches:
	  native_rtp_fix.diff uploaded by Kinsey Moore (License 6273)
	  ........ Merged revisions 402148 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-29 11:15 +0000 [r402140]  Joshua Colp <jcolp@digium.com>

	* /, rest-api/api-docs/playback.json, res/res_ari_playback.c:
	  res_ari_playback: Add missing 404 error response for GET and
	  DELETE. (closes issue ASTERISK-22722) Reported by: Richard
	  Mudgett ........ Merged revisions 402139 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-28 22:10 +0000 [r402128-402130]  David M. Lee <dlee@digium.com>

	* /, doc: Ignore full docs ........ Merged revisions 402127 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /: Put back several merge revisions that were lost in r402054

	* /: Put back several merge revisions that were lost in r401962

2013-10-28 15:08 +0000 [r402113-402117]  Michael L. Young <elgueromexicano@gmail.com>

	* /, UPGRADE-11.txt, UPGRADE-12.txt: Fix UPGRADE.txt Due To Merging
	  From Branch 11 When merging in the patch for ASTERISK-22728, the
	  UPGRADE.txt file was changed incorrectly. That change should have
	  gone into ASTERISK-11.txt. This commit is to fix that. Also,
	  another comment in the UPGRADE-11.txt was missing and this commit
	  adds that as well. ........ Merged revisions 402115 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c, UPGRADE-12.txt: chan_sip: Clarify
	  'Forcerport' Setting Displayed When Running "sip show peers"
	  While looking at ASTERISK-22236, Walter Doekes pointed out that
	  when running "sip show peers", the setting being displayed can be
	  confusing. The display of "N" used to mean NAT (i.e. yes). The
	  NAT setting has gone through many different changes resulting in
	  the display of different characters to try and convey what the
	  current setting is for 'Forcerport' (A for Auto and Forcerport is
	  currently on, a for Auto but Forcerport is off, Y for yes, and N
	  for no). During the initial code review to try and clarify these
	  settings (especially since "N" no longer meant what it used to
	  mean in prior versions of Asterisk), Mark Michelson suggested
	  using the full space available to display the settings which
	  helped to make the settings very clear. That was a great
	  suggestion. Therefore, this patch does the following: * The
	  column for 'Forcerport' now will show: Auto (Yes), Auto (No),
	  Yes, or No. * A column for the 'Comedia' setting has been added.
	  It too will display the setting in a non-cryptic way: Auto (Yes),
	  Auto (No), Yes, or No. * UPGRADE.txt has been updated to document
	  this change. (closes issue ASTERISK-22728) Reported by: Walter
	  Doekes Tested by: Michael L. Young Patches:
	  asterisk-forcerport-display-clarification_v3.diff uploaded by
	  Michael L. Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/2941 ........ Merged revisions
	  402111 from http://svn.asterisk.org/svn/asterisk/branches/11
	  ........ Merged revisions 402112 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-27 23:22 +0000 [r402073-402091]  Matthew Jordan <mjordan@digium.com>

	* main/cdr.c, /: Filter out internal channels from dial message
	  handling Surrogate channels would pop up from time to time in
	  dial message handling. This would cause a WARNING message to
	  appear, indicating that the Surrogate channel had no CDR. This
	  patch filters out those channels that have the internal
	  implementation flag set, such that the WARNING message isn't
	  displayed. ........ Merged revisions 402090 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* cdr/cdr_sqlite3_custom.c, /, cdr/cdr_syslog.c, cdr/cdr_sqlite.c,
	  cdr/cdr_adaptive_odbc.c, addons/cdr_mysql.c,
	  include/asterisk/cdr.h, cdr/cdr_pgsql.c, cdr/cdr_odbc.c,
	  cdr/cdr_radius.c, cdr/cdr_custom.c, cdr/cdr_manager.c,
	  cdr/cdr_tds.c, cdr/cdr_csv.c, main/cdr.c: Prevent CDR backends
	  from unregistering while billing data is in flight This patch
	  makes it so that CDR backends cannot be unregistered while active
	  CDR records exist. This helps to prevent billing data from being
	  lost during restarts and shutdowns. Review:
	  https://reviewboard.asterisk.org/r/2880/ ........ Merged
	  revisions 402081 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, contrib/ast-db-manage/config/env.py,
	  contrib/ast-db-manage/config/versions/4da0c5f79a9c_create_tables.py,
	  contrib/ast-db-manage/voicemail/env.py: Update Alembic database
	  scripts for external scripting and PostgreSQL, Oracle This patch
	  does the following: 1) The env scripts have been updated to be
	  tolerant of a NULL configuration file. This occurs when
	  configuration is provided by an external script, such that the
	  actual config.ini file is not used. 2) Enum types have all been
	  given names. This is needed for PostgreSQL script generation. 3)
	  The identifier meetme_confno_starttime_endtime is greater than 30
	  characters, and hence invalid for Oracle databases. This has been
	  truncated down to meetme_confno_start_end. ........ Merged
	  revisions 400383 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-26 12:56 +0000 [r402065]  Joshua Colp <jcolp@digium.com>

	* channels/chan_pjsip.c, include/asterisk/res_pjsip_session.h, /:
	  chan_pjsip: Fix a crash when direct media is enabled and an ACK
	  is received after the channel is hung up. (closes issue
	  ASTERISK-22731) Reported by: Kinsey Moore ........ Merged
	  revisions 402064 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-26 00:36 +0000 [r402056]  Richard Mudgett <rmudgett@digium.com>

	* res/res_stasis.c, /: res_stasis.c: Made use the ao2_container
	  callback templates. * Made res_stasis.c use the OBJ_SEARCH_XXX
	  defines. ........ Merged revisions 402055 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-26 00:27 +0000 [r402054]  Scott Griepentrog <sgriepentrog@digium.com>

	* main/rtp_engine.c, /, include/asterisk/rtp_engine.h: rtp_engine:
	  fix rtp payloads copy and improve argument names In function
	  ast_rtp_instance_early _bridge_make_compatible the use of
	  instance 0/1 as arguments doesn't clearly communicate a direction
	  that the copying of payloads from the source channel to the
	  destination channel will occur, making it more probable to have
	  the arguments to ast_rtp_codecs_payloads_copy() put in the
	  reverse order. This patch renames the arguments with _dst and
	  _src suffixes and corrects the copy direction. (closes issue
	  ASTERISK-21464) Reported by: Kevin Stewart Review:
	  https://reviewboard.asterisk.org/r/2894/ ........ Merged
	  revisions 402000 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 Test shows
	  rtpmap:119 being copied per this change, but is not in sip invite
	  ........ Merged revisions 402042 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 402043 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-25 23:58 +0000 [r402004-402045]  Richard Mudgett <rmudgett@digium.com>

	* /, main/taskprocessor.c: taskprocessor: Made use pthread_equal()
	  to compare thread ids. * Removed another silly use of RAII_VAR().
	  RAII_VAR() and SCOPED_LOCK() are not silver bullets that allow
	  you to turn off your brain. ........ Merged revisions 402044 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/stasis/app.c: You'd think that new files would be free of
	  whitespace issues. But you would be wrong. ........ Merged
	  revisions 402003 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-25 22:01 +0000 [r401999-402002]  Jonathan Rose <jrose@digium.com>

	* res/ari/resource_bridges.c, res/res_ari_bridges.c, /,
	  rest-api/api-docs/channels.json, res/ari/resource_channels.c,
	  res/res_ari_channels.c, rest-api/api-docs/bridges.json: ARI:
	  channel/bridge recording errors when invalid format specified
	  Asterisk will now issue 422 if recording is requested against
	  channels or bridges with an unknown format (closes issue
	  ASTERISK-22626) Reported by: Joshua Colp Review:
	  https://reviewboard.asterisk.org/r/2939/ ........ Merged
	  revisions 402001 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis_recording.c, rest-api/api-docs/channels.json,
	  res/ari/resource_channels.c, res/ari/ari_model_validators.c,
	  res/res_ari_channels.c, rest-api/api-docs/bridges.json,
	  rest-api/api-docs/recordings.json, res/ari/resource_bridges.c,
	  res/ari/ari_model_validators.h, res/res_ari_bridges.c,
	  rest-api/api-docs/events.json, /: ARI recordings: Issue HTTP
	  failures for recording requests with file conflicts If a file
	  already exists in the recordings directory with the same name as
	  what we would record, issue a 422 instead of relying on the
	  internal failure and issuing success. (closes issue
	  ASTERISK-22623) Reported by: Joshua Colp Review:
	  https://reviewboard.asterisk.org/r/2922/ ........ Merged
	  revisions 401973 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-25 20:51 +0000 [r401962]  Scott Griepentrog <sgriepentrog@digium.com>

	* include/asterisk/pbx.h, main/pbx.c, /: pbx.c: fix confused match
	  caller id that deleted exten still in hash This fixes a bug where
	  a zero length callerid match adjacent to a no match callerid
	  extension entry would be deleted together, which then resulted in
	  hashtable references to free'd memory. A third state of the
	  matchcid value has been added to indicate match to any extension
	  which allows enforcing comparison of matchcid on/off without
	  errors. (closes issue AST-1235) Reported by: Guenther Kelleter
	  Review: https://reviewboard.asterisk.org/r/2930/ ........ Merged
	  revisions 401959 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401960 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401961 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-25 17:41 +0000 [r401898-401939]  Jonathan Rose <jrose@digium.com>

	* /, res/res_pjsip/pjsip_distributor.c,
	  res/res_pjsip_endpoint_identifier_user.c: PJSIP: Add log messages
	  when requests are received for non-existent endpoints (closes
	  issue ASTERISK-22552) Reported by: Rusty Newton Review:
	  https://reviewboard.asterisk.org/r/2934/ ........ Merged
	  revisions 401938 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* utils/clicompat.c, utils/refcounter.c, /: Put clicompat-r2.patch
	  back in We've figured out how to resolve the problems this was
	  causing in 12/trunk, so this can go back in now. (issue
	  ASTERISK-22467) Reported by: Corey Farrell Patches:
	  clicompat-r2.patch uploaded by coreyfarrell (license 5909)
	  ........ Merged revisions 401914 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401935 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401936 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, utils/clicompat.c: revert clicompat-r2.patch from r401704
	  Patch caused the following build errors against testsuite
	  https://bamboo.asterisk.org/bamboo/browse/AST-ATRUNKBUILD4-244
	  (issue ASTERISK-22467) Reported by: Corey Farrell ........ Merged
	  revisions 401895 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401896 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401897 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-25 16:09 +0000 [r401886]  Kevin Harwell <kharwell@digium.com>

	* /, channels/chan_sip.c: chan_sip: Allow a sip peer to accept both
	  AVP and AVPF calls Adapts the behaviour of avpf to only impact
	  the format of outgoing calls. For inbound calls, both AVP and
	  AVPF calls will be accepted regardless of the value of avpf in
	  the configuration. (closes issue ASTERISK-22005) Reported by:
	  Torrey Searle Patches: optional_avpf_trunk.patch uploaded by
	  tsearle (license 5334) ........ Merged revisions 401884 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401885 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-25 13:49 +0000 [r401873]  David M. Lee <dlee@digium.com>

	* tests/test_json.c, /: test_json: Fix deprecation warnings After a
	  series of upgrades over recent weeks, I've discovered that
	  test_json.c won't compile in dev mode any more for me. One of
	  gcc-4.8.2, OS X Mavericks or Xcode 5 has decided to deprecate
	  tempnam. Which, in general, is a good thing. But for test code
	  that just needs a temporary file, it's just annoying. This patch
	  replaces usage of tempname with mkstemp, avoiding the deprecation
	  warning. It also removes the temporary files when the test is
	  complete, which apparently we weren't doing before (oops).
	  Review: https://reviewboard.asterisk.org/r/2957/ ........ Merged
	  revisions 401872 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-24 21:06 +0000 [r401836]  Kevin Harwell <kharwell@digium.com>

	* /, main/logger.c: Logging: Logging types ignored after specifying
	  a verbose level If one specified a verbose level within a logging
	  facility in logger.conf then any component after it was ignored.
	  Fixed so all values are correctly read. (closes issue
	  ASTERISK-22456) Reported by: Kevin Harwell ........ Merged
	  revisions 401833 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401835 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-24 20:48 +0000 [r401834]  David M. Lee <dlee@digium.com>

	* rest-api-templates/models.wiki.mustache,
	  rest-api/api-docs/events.json, /,
	  rest-api-templates/swagger_model.py,
	  rest-api-templates/ari_model_validators.c.mustache: The Swagger
	  1.2 specification for type extension ended up being slightly
	  different than my proposal. Instead of putting an 'extends' field
	  on the subtype, the base type has a 'subTypes' field, which is a
	  list of the subTypes. Given that its a messaging model and not an
	  object model, kinda makes sense. This patch changes the
	  events.json api-doc, and the python translators to take the new
	  format into account. Other changes that are in Swagger 1.2 were
	  not adopted, since the spec is still in flux, and could change
	  before it's finalized. A summary of changes to the Swagger-1.2
	  spec can be found at
	  https://github.com/wordnik/swagger-core/wiki/1.2-transition.
	  (closes issue ASTERISK-22440) Review:
	  https://reviewboard.asterisk.org/r/2909/ ........ Merged
	  revisions 401701 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-24 20:34 +0000 [r401622-401832]  Jonathan Rose <jrose@digium.com>

	* /, main/utils.c: utils: Fix memory leaks and missed
	  unregistration of CLI commands on shutdown Final set of patches
	  in a series of memory leak/cleanup patches by Corey Farrell
	  (closes issue ASTERISK-22467) Reported by: Corey Farrell Patches:
	  main-utils-1.8.patch uploaded by coreyfarrell (license 5909)
	  main-utils-11.patch uploaded by coreyfarrell (license 5909)
	  main-utils-12up.patch uploaded by coreyfarrell (license 5909)
	  ........ Merged revisions 401829 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401830 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401831 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, tests/test_linkedlists.c: test_linkedlists: Fix memory leak
	  (issue ASTERISK-22467) Reported by: Corey Farrell Patches:
	  test_linkedlists-1.8.patch uploaded by coreyfarrell (license
	  5909) test_linkedlists-11up.patch uploaded by coreyfarrell
	  (license 5909) ........ Merged revisions 401790 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401791 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401792 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/jitterbuf.c: jitterbuf: Fix memory leak on jitter buffer
	  reset (issue ASTERISK-22467) Reported by: Corey Farrell Patches:
	  jitterbuf-jb_reset-leak-1.8.patch
	  jitterbuf-jb_reset-leak-11up.patch ........ Merged revisions
	  401786 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 401787 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401788 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/astobj2.c, /: astobj2: Unregister debug CLI commands at exit
	  (issue ASTERISK-22467) Reported by: Corey Farrell Patches:
	  astobj2-clean-debug-cli-1.8-11.patch uploaded by coreyfarrell
	  (license 5909) astobj2-clean-debug-cli-12up.patch uploaded by
	  coreyfarrell (license 5909) ........ Merged revisions 401781 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401783 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401784 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/app_voicemail.c, /: app_voicemail: Memory Leaks against
	  tests (issue ASTERISK-22467) Reported by: Corey Farrell Patches:
	  app_voicemail-1.8.patch uploaded by coreyfarrell (license 5909)
	  app_voicemail-11up.patch uploaded by coreyfarrell (license 5909)
	  ........ Merged revisions 401743 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401744 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401745 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/app.c, main/asterisk.c, utils/clicompat.c,
	  channels/chan_dahdi.c, codecs/ilbc/doCPLC.c, main/data.c, /:
	  memory leaks: Memory leak cleanup patch by Corey Farrell (second
	  set) Also covers ast_app_parse_timelen-fail-zero-length.patch,
	  but the patch was replaced with one of my own. (issue
	  ASTERISK-22467) Reported by: Corey Farrell Patches:
	  chan_dahdi-cleanup_push.patch uploaded by coreyfarrell (license
	  5909) clicompat-r2.patch uploaded by coreyfarrell (license 5909)
	  codecs-ilbc-doCPLC.patch uploaded by coreyfarrell (license 5909)
	  data-cleanup-test-registration.patch uploaded by coreyfarrell
	  (license 5909) main-asterisk-kill-listener.patch uploaded by
	  coreyfarrell (license 5909) ........ Merged revisions 401704 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401705 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401706 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, tests/test_dlinklists.c, funcs/func_math.c,
	  channels/sip/reqresp_parser.c, main/test.c,
	  main/editline/readline.c: memory leaks: Memory leak cleanup patch
	  by Corey Farrell (first set) (issue ASTERSIK-22467) Reported by:
	  Corey Farrell Patches:
	  chan_sip-parse_contact_header_test-free-contacts.patch uploaded
	  by coreyfarrell (license 5909) cli-filename-completion-leak.patch
	  uploaded by coreyfarrell (license 5909) func_math.patch uploaded
	  by corefarrell (license 5909) main-test-cleanup.patch uploaded by
	  coreyfarrell (license 5909) test_dlinklists.patch uploaded by
	  coreyfarrell (license 5909) ........ Merged revisions 401660 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401661 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401662 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/translate.c, res/res_rtp_asterisk.c: res_rtp_asterisk:
	  Address jittery DTMF events in RTP streams (closes issue
	  ASTERISK-21170) Reported by: NITESH BANSAL Patches:
	  dtmf-timestamp.patch uploaded by NITESH BANSAL (license 6418)
	  Review: https://reviewboard.asterisk.org/r/2938/ ........ Merged
	  revisions 401619 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401620 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401621 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-23 16:52 +0000 [r401582]  Richard Mudgett <rmudgett@digium.com>

	* /, cdr/cdr_adaptive_odbc.c: cdr_adaptive_odbc: Also apply a
	  filter when the CDR value is empty. Extra CDR records are written
	  if a filtered CDR value is empty because the filter is not
	  checked. (closes issue ASTERISK-22272) Reported by: Jordi Llull
	  Chavarria ........ Merged revisions 401577 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401579 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401581 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-23 16:48 +0000 [r401580]  John Bigelow <jbigelow@digium.com>

	* /, main/bridge_channel.c: Add a test suite event to indicate when
	  the atxfer 3-way feature is detected This adds a test suite event
	  that indicates to tests when the attended transfer three-way call
	  feature is detected. Review:
	  https://reviewboard.asterisk.org/r/2912/ ........ Merged
	  revisions 401578 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-23 15:23 +0000 [r401540]  Kinsey Moore <kmoore@digium.com>

	* channels/chan_mgcp.c, /: chan_mgcp: Properly handle malformed
	  media lines This corrects a situation in which a media line was
	  not parsed properly and resulted in a crash. (closes issue
	  ASTERISK-21190) Reported by: adomjan Patches:
	  chan_mgcp.c-sscnaf_fix uploaded by adomjan (License 5448)
	  ........ Merged revisions 401537 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401538 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401539 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-23 11:16 +0000 [r401500]  Joshua Colp <jcolp@digium.com>

	* /, channels/chan_sip.c: chan_sip: Fix an issue where an
	  incompatible audio format may be added to SDP. If preferred
	  codecs included any non-audio format the code would mistakenly
	  add the audio format, even if it was not a joint capability with
	  the remote side. (closes issue ASTERISK-21131) Reported by:
	  nbougues Patches: patch_unsupported_codec_1.8.patch uploaded by
	  nbougues (license 6470) ........ Merged revisions 401497 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401498 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401499 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-23 02:36 +0000 [r401489]  Michael L. Young <elgueromexicano@gmail.com>

	* channels/chan_iax2.c, configs/iax.conf.sample, /: chan_iax2: Fix
	  Binding To Multiple Addresses Again When reworking chan_iax2 for
	  IPv6, the ability to bind to multiple addresses was removed by
	  mistake. This patch restores this functionality and adds notes
	  about IPv6 addresses in the sample config. (closes issue
	  ASTERISK-22741) Reported by: Joshua Colp Tested by: Michael L.
	  Young Patches: asterisk-22741-fix-binding-multiple-addr.diff
	  uploaded by Michael L. Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/2945/ ........ Merged
	  revisions 401488 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-22 23:10 +0000 [r401450]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_rtp_asterisk.c: res_rtp_asterisk: Fix crash when RTCP
	  is not available during SSRC change In r400089, a patch was put
	  in to correct erroneous RTCP statistic resets. Unfortunately,
	  ast_rtp_read can be called on an RTP instance that does not have
	  RTCP information. This patch prevents that crash by only
	  resetting the statistics if we do actually have an RTCP instance.
	  (issue AST-1174) (closes issue ASTERISK-22667) Reported by: John
	  Bigelow ........ Merged revisions 401445 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401446 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401447 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-22 19:04 +0000 [r401421-401435]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_queue.c, /: app_queue: Fix CLI "queue remove member"
	  queue_log entry. The queue_log entry resulting from CLI "queue
	  remove member" when log_membername_as_agent is enabled is wrong.
	  It always uses the interface name instead of the member name in
	  the queue_log entry. * Get the queue member before removing it
	  from the queue so the member name is available for the queue_log
	  entry. (closes issue ASTERISK-21826) Reported by: Oscar Esteve
	  Patches: fix_membername.diff (license #6505) patch uploaded by
	  Oscar Esteve (modified to fix potential ref leak) ........ Merged
	  revisions 401433 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401434 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/bridge_channel.c,
	  include/asterisk/bridge_channel_internal.h, /, main/bridge.c:
	  Bridging: Fix orphaned bridge if neither of the joining channels
	  can join. The original issue noted that the bridge is orphaned
	  when res_parking.so is not loaded and a call uses the dial kK
	  flags. A similar issue happens when only one of the park flags is
	  used. In this case you have the bridge with one or the other
	  channel left in it. The channel and bridge will stay around until
	  the channel hangs up. * Fixed the initial bridge channel push
	  failure to act as if the channel were kicked out of the bridge.
	  The bridge then decides if it needs to be dissolved. (closes
	  issue ASTERISK-22629) Reported by: Kevin Harwell Review:
	  https://reviewboard.asterisk.org/r/2928/ ........ Merged
	  revisions 401424 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/parking/parking_bridge_features.c,
	  res/parking/parking_bridge.c, /: res_parking: Give parking
	  timeout comebacktoorigin channel DTMF features. Parking timeouts
	  did not set any DTMF features for the channel calling the parker
	  back. * Added code to set the parkedcalltransfers,
	  parkedcallreparking, parkedcallhangup, and parkedcallrecording
	  options appropriately for the channels when a parking timeout
	  occurs. The recall channel DTMF options are set using the
	  BRIDGE_FEATURES channel variable to allow the other timeout
	  options to have the DTMF features available. (closes issue
	  ASTERISK-22630) Reported by: Kevin Harwell Review:
	  https://reviewboard.asterisk.org/r/2942/ ........ Merged
	  revisions 401422 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_parking.c: res_parking: Update XML documention for
	  DTMF features after parking timeout. * Updated the XML
	  documentation to indicate that the parkedcalltransfers,
	  parkedcallreparking, parkedcallhangup, and parkedcallrecording
	  configuration options also apply to parking timeouts. (issue
	  ASTERISK-22630) Reported by: Kevin Harwell Review:
	  https://reviewboard.asterisk.org/r/2942/ ........ Merged
	  revisions 401420 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-22 15:17 +0000 [r401411]  Joshua Colp <jcolp@digium.com>

	* apps/app_dial.c: Add an 'R' option to Dial which sends ringing
	  until early media has been received. (closes issue
	  ASTERISK-10487) Reported by: Gaspar Zoltan Patches: 10487.patch
	  uploaded by n8ideas (license 6075)

2013-10-21 21:06 +0000 [r401365]  Mark Michelson <mmichelson@digium.com>

	* /, main/bridge_channel.c: Remove a noisy debug message from
	  bridging code. This particular debug message, during a stress
	  test, was logged so often that it appeared that there may be a
	  memory leak in the logger code. In actuality, there was no memory
	  leak, but the logger thread was having a hard time keeping up
	  with the demands of the rest of the system. Since this debug
	  message has no value at all, the best way to fix the problem was
	  to just remove the message. (closes issue AST-1225) reported by
	  John Bigelow Patches: spammy_log.diff uploaded by Mark Michelson
	  (License #5049) ........ Merged revisions 401364 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-21 19:50 +0000 [r401328]  Kevin Harwell <kharwell@digium.com>

	* /, main/editline/term.c: Segfault in LIBEDIT_INTERNAL after
	  tgetstr(), when libncurses5-dev isn't installed Include the
	  appropriate declarations when not using termcap, but term+curses
	  and [n]curses do not exist. (closes issue ASTERISK-22351)
	  Reported by: A. Iglesias Patches:
	  issueA22351_libedit_internal_without_ncurses_dev.patch uploaded
	  by wdoekes (license 5674) ........ Merged revisions 401325 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401326 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401327 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-21 18:59 +0000 [r401316-401317]  David M. Lee <dlee@digium.com>

	* rest-api/api-docs/channels.json, /: Fixing r401281; the model
	  name is Channel, with a capital C ........ Merged revisions
	  401315 from http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_ari.c, /: Fixed malformed Access-Control-Allow-Methods
	  header. Was causing Safari to barf on POST and DELETE. ........
	  Merged revisions 401106 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-19 21:57 +0000 [r401292]  Kinsey Moore <kmoore@digium.com>

	* /, channels/chan_iax2.c: Fix IAX2 incoming call address lookups
	  This fixes address lookup for incoming calls without a peer
	  definition. The address family was unset instead of being set to
	  AST_AF_UNSPEC which was causing lookup failures on "127.0.0.1".
	  This is one of the causes of the current failure of the app_page
	  integration test. Review:
	  https://reviewboard.asterisk.org/r/2933/ ........ Merged
	  revisions 401291 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-19 14:45 +0000 [r401282]  Joshua Colp <jcolp@digium.com>

	* res/ari/resource_channels.h, main/pbx.c, /,
	  rest-api/api-docs/channels.json, res/ari/resource_channels.c,
	  res/res_ari_channels.c: Return a channel snapshot when
	  originating using ARI, and subscribe the Stasis application to
	  it. This change allows a user of ARI to know what channel it has
	  originated and also follow any progress. If a Stasis application
	  is provided it will be automatically subscribed to the originated
	  channel immediately. (closes issue ASTERISK-22485) Reported by:
	  David Lee Review: https://reviewboard.asterisk.org/r/2910/
	  ........ Merged revisions 401281 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-18 22:52 +0000 [r401272]  Richard Mudgett <rmudgett@digium.com>

	* /, res/parking/parking_controller.c: res_parking: Remove setting
	  useless flag. ........ Merged revisions 401271 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-18 21:51 +0000 [r401263]  David M. Lee <dlee@digium.com>

	* contrib/scripts/get_swagger_ui.sh (added), Makefile, /,
	  static-http: This is just a quick script for dumping swagger-ui
	  into static-http, so that it can be served by the Asterisk web
	  server. I had to change the Makefile in order to recursively
	  install content from the static-http directory, hence the code
	  review instead of just putting it in. Review:
	  https://reviewboard.asterisk.org/r/2924/ ........ Merged
	  revisions 401261 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-18 18:44 +0000 [r401249]  Mark Michelson <mmichelson@digium.com>

	* main/sorcery.c, main/cli.c, main/manager.c, /, main/bridge.c,
	  main/bucket.c: Resolve some memory leaks due to incorrect for
	  loop / ao2 ref usage. A common idiom in Asterisk is to due
	  something like: for (ao2_obj = list_beginning; ao2_obj =
	  next_item; ao2_ref(ao2_obj, -1)) { ...do stuff... } This is nice
	  because it automatically takes care of the object references for
	  you. However, there is a pitfall here. If a break statement is in
	  the for loop, then the current reference is not cleaned up. In
	  some cases, this is on purpose, but in others there is a leak.
	  This commit fixes the leak cases. ........ Merged revisions
	  401248 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-18 16:59 +0000 [r401233-401240]  Richard Mudgett <rmudgett@digium.com>

	* /, res/res_fax.c, include/asterisk/channel.h, apps/app_dial.c,
	  main/channel.c: Add channel lock protection around translation
	  path setup. Most callers of ast_channel_make_compatible() happen
	  before the channels enter a two party bridge. With the new
	  bridging framework, two party bridging technologies may also call
	  ast_channel_make_compatible() when there is more than one thread
	  involved with the two channels. * Added channel lock protection
	  in set_format() and ast_channel_make_compatible_helper() when
	  dealing with the channel's native formats while setting up a
	  translation path. * Fixed best_src_fmt and best_dst_fmt usage
	  consistency in ast_channel_make_compatible_helper(). The call to
	  ast_translator_best_choice() got them backwards. * Updated some
	  callers of ast_channel_make_compatible() and the function
	  documentation. There is actually a difference between the two
	  channels passed in. * Fixed the deadlock potential in res_fax.c
	  dealing with ast_channel_make_compatible(). The deadlock
	  potential was already there anyway because res_fax called
	  ast_channel_make_compatible() with chan locked. (closes issue
	  ASTERISK-22542) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2915/ ........ Merged
	  revisions 401239 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, include/asterisk/bridge.h: Tweak ast_bridge_depart() doxygen.
	  ........ Merged revisions 401232 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-18 16:06 +0000 [r401216-401224]  Mark Michelson <mmichelson@digium.com>

	* include/asterisk/bridge.h, /: Remove the bit about requiring
	  ast_bridge_depart() to be called before ast_bridge_destroy().
	  ........ Merged revisions 401223 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/bridge.h, /: Clarify in ast_bridge_destroy()
	  about how departable channels must be handled. ........ Merged
	  revisions 401212 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-18 15:14 +0000 [r401184]  Michael L. Young <elgueromexicano@gmail.com>

	* /, channels/chan_sip.c: Remove Port Restriction When Checking For
	  NAT When trying to determine if a peer is behind NAT, we should
	  not be using the ports when comparing addresses. This patch
	  removes the port from being checked and just useds the addresses
	  now. (closes issue ASTERISK-22729) Reported by: Michael L. Young
	  Tested by: Michael L. Young Patches:
	  asterisk-remove-using-port-for-nat-check.diff uploaded by Michael
	  L. Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/2927/ ........ Merged
	  revisions 401182 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401183 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-18 14:50 +0000 [r401181]  Walter Doekes <walter+asterisk@wjd.nu>

	* main/channel.c, /: Properly copy/remove the device state cache
	  flag over a masquerade. In r378303 the
	  AST_FLAG_DISABLE_DEVSTATE_CACHE flag was added that tells the
	  devstate system to not cache states for non-real devices.
	  However, when optimizing away channels (ast_do_masquerade), that
	  flag wasn't copied. In my case, using Local devices as queue
	  members created a situation where the endpoint was considered in
	  use, but the state change of the device being available again was
	  ignored (not cached). The endpoint channel was optimized into the
	  (previously) Local channel, but kept the do-not-cache flag. The
	  end result being that the queue member apparently stayed in use
	  forever. (closes issue ASTERISK-22718) Reported by: Walter Doekes
	  Review: https://reviewboard.asterisk.org/r/2925/ ........ Merged
	  revisions 401178 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401179 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401180 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-17 20:39 +0000 [r401169]  Michael L. Young <elgueromexicano@gmail.com>

	* /, channels/chan_sip.c: Fix Setting A chan_sip Dialog's
	  SIP_NAT_FORCE_RPORT Flag A condition was added in a commit to fix
	  ASTERISK-21374, that, if the SIP_PAGE3_NAT_AUTO_RPORT flag was
	  set, to then copy a peer's SIP_NAT_FORCE_RPORT flag to the
	  dialog. This condition should not have been there since it
	  assumed that if Asterisk is in an environment where NAT is
	  involved, that the auto_* nat settings or force_rport setting
	  would be on in the global settings. If the nat setting in the
	  global setting is set to 'nat=no' and then turned on for peers
	  (which is not quite the recommended way, although it is allowed)
	  this flag is never copied to the dialog resulting in problems
	  like, REGISTER replies going to the wrong port. This patch
	  removes this conditional check and will now always use the peer's
	  flag which by this point in the code the checks on whether the
	  peer is behind NAT or not (if using auto_force_rport) have
	  already been run. (closes issue ASTERISK-22236) Reported by:
	  Filip Frank Tested by: Michael L. Young Patches:
	  asterisk-2236-always-set-rport.diff uploaded by Michael L. Young
	  (license 5026) Review: https://reviewboard.asterisk.org/r/2919/
	  ........ Merged revisions 401167 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401168 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-17 18:25 +0000 [r401159]  Jonathan Rose <jrose@digium.com>

	* res/res_parking.c, /: res_parking: Fix bug where reloading
	  immediately wipes new parkpos extensions (closes issue
	  ASTERISK-22631) Reported by: Kevin Harwell ........ Merged
	  revisions 401158 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-17 15:41 +0000 [r401122]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_xmpp.c, res/res_jabber.c: Reduce log level of a
	  non-pubsub error message Drop an error log message to debug level
	  1 since distributed device state functions correctly when
	  receiving this message and it spams the logs. (closes issue
	  ASTERISK-22410) Reported by: abelbeck Patches:
	  asterisk-1.8-res_jabber-log-nonpubsub-error-to-debug.patch
	  uploaded by abelbeck (License 5903)
	  asterisk-11-res_xmpp-log-nonpubsub-error-to-debug.patch uploaded
	  by abelbeck (License 5903) ........ Merged revisions 401119 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401120 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401121 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-16 21:22 +0000 [r401108]  Richard Mudgett <rmudgett@digium.com>

	* /, res/ari/resource_playback.c: ARI: Fix crash when POST
	  /playback/{id}/control does not have an operation parameter.
	  (closes issue ASTERISK-22680) Reported by: John Bigelow ........
	  Merged revisions 401107 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-16 17:01 +0000 [r401097]  David M. Lee <dlee@digium.com>

	* rest-api/resources.json, /: Oops. Leftover /stasis reference
	  ........ Merged revisions 401096 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-16 14:02 +0000 [r401088]  Kinsey Moore <kmoore@digium.com>

	* rest-api/api-docs/bridges.json, res/ari/resource_channels.h, /,
	  res/ari/resource_bridges.h, rest-api/api-docs/channels.json:
	  Clarify documentation for channel and bridge list This makes it
	  clear that the ARI API calls for listing channels and bridges
	  will list all channels or bridges in the system and not just
	  those that are in or are controlled by a Stasis application.
	  (closes issue ASTERISK-22635) Reported by: Kevin Harwell ........
	  Merged revisions 401087 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-16 12:19 +0000 [r401079]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, apps/app_queue.c: Don't check all realtime queues when doing
	  "queue show some_queue". When using realtime queues, queues have
	  to be fetched from the database every now and then to see if any
	  info has been changed or to see if the queue has been removed.
	  When fetching info for an individual queue, the pruning of other
	  queues is unnecessarily costly. Review:
	  https://reviewboard.asterisk.org/r/2907/ ........ Merged
	  revisions 401049 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 401076 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401077 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-16 00:12 +0000 [r401041]  Paul Belanger <paul.belanger@polybeacon.com>

	* /, rest-api/api-docs/bridges.json, res/res_ari_bridges.c: Use
	  POST / DELETE to toggle ARI bridge moh Review:
	  https://reviewboard.asterisk.org/r/2911/ ........ Merged
	  revisions 401040 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-15 23:44 +0000 [r401020-401039]  Richard Mudgett <rmudgett@digium.com>

	* main/translate.c: translate.c: Some minor code tweaks. *
	  Consistently compare format2index() return value so matrix_get()
	  cannot get passed negative values. * Optimize
	  ast_translator_best_choice() to defer initializing things until
	  needed. Also cached the matrix_get() return value rather than
	  repeatedly calling it.

	* /, channels/dahdi/bridge_native_dahdi.c: bridge_native_dahdi:
	  Return channel join failure if could not make the channels
	  compatible. ........ Merged revisions 401030 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_iax2.c: chan_iax2: Fix channel left locked in
	  off nominal code path. ........ Merged revisions 401016 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 401017 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-15 20:03 +0000 [r401019]  Kinsey Moore <kmoore@digium.com>

	* rest-api/api-docs/bridges.json, res/res_ari_bridges.c, /: Ensure
	  bridge record error responses validate This adds the list of
	  expected errors to the /bridges/{bridgeId}/record ARI
	  documentation so that outbound 4xx errors validate properly.
	  Previously, this would result in a response validation failure.
	  (closes issue ASTERISK-22627) Reported by: Joshua Colp ........
	  Merged revisions 401018 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-15 15:30 +0000 [r401007]  Paul Belanger <paul.belanger@polybeacon.com>

	* rest-api/api-docs/channels.json, res/res_ari_channels.c, /: Use
	  POST / DELETE to toggle hold / moh for ARI channels This change
	  updates how we handle toggle events, rather then create two
	  different function names, we'll just use POST / DELETE from HTTP
	  to handle it. Review: https://reviewboard.asterisk.org/r/2906/
	  ........ Merged revisions 400999 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-15 15:26 +0000 [r400998]  Mark Michelson <mmichelson@digium.com>

	* /, channels/chan_sip.c: Prevent chan_sip from sending duplicate
	  BYEs. When a 200 OK for an initial INVITE is received, we were
	  doing the right thing by ACKing and sending an immediate BYE.
	  However, we also were doing the wrong thing and queuing an answer
	  frame, thus causing the call to be answered. This would cause the
	  call to be hung up by the channel thread, thus resulting in a
	  second BYE being sent out. In this fix, I also have set the
	  hangupcause to be correct since the initial BYE being sent by
	  Asterisk had an unknown hangup cause. I have changed to using
	  "Bearer capabilty not available" since the call was hung up due
	  to an SDP offer/answer error. (closes issue ASTERISK-22621)
	  reported by Kinsey Moore ........ Merged revisions 400970 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400971 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400984 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-15 13:44 +0000 [r400959]  David M. Lee <dlee@digium.com>

	* /, rest-api-templates/asterisk_processor.py: My doc correction in
	  r400842 had a silly bug. Because I added a wiki_description to
	  models and not their properties, the rendered wiki page had the
	  model description instead of the property descriptions, which
	  looks very silly indeed. (closes issue ASTERISK-22705) ........
	  Merged revisions 400958 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-14 22:52 +0000 [r400913-400950]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_dahdi.c, configs/chan_dahdi.conf.sample,
	  channels/chan_dahdi.h: chan_dahdi: Add config support for hwgain
	  settings. * Add hwtxgain and hwrxgain config options to
	  chan_dahdi.conf with documentation in chan_dahdi.conf.sample.
	  (closes issue ASTERISK-22429) Reported by: Jaco Kroon Patches:
	  jira_asterisk_22429_hwgain_trunk.patch (license #5621) patch
	  uploaded by rmudgett

	* channels/chan_dahdi.c, /, channels/chan_dahdi.h: chan_dahdi:
	  Reflect the set software gain in the CLI "dahdi show channel"
	  output. * Remember the swgain setting from CLI "dahdi set swgain"
	  command so the CLI "dahdi show channel" output will reflect the
	  current setting. * Updated CLI "dahdi set hwgain" and "dahdi set
	  swgain" documentation. (issue ASTERISK-22429) Reported by: Jaco
	  Kroon Patches: jira_asterisk_22429_v1.8_v2.patch (license #5621)
	  patch uploaded by rmudgett ........ Merged revisions 400907 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400909 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400911 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-14 22:03 +0000 [r400912]  Mark Michelson <mmichelson@digium.com>

	* /, channels/chan_sip.c: chan_sip: Do not increment the SDP
	  version between 183 and 200 responses. Bumping the SDP version
	  number can cause interoperability problems since receivers of the
	  responses will expect that a 200 SDP will be identical to a
	  previous 183 SDP. (closes issue ASTERISK-21204) reported by
	  NITESH BANSAL Patches:
	  dont-increment-session-version-in-2xx-after-183.patch uploaded by
	  NITESH BANSAL (License #6418) ........ Merged revisions 400906
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 400908 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400910 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-14 15:54 +0000 [r400891]  Kevin Harwell <kharwell@digium.com>

	* /, res/res_pjsip_outbound_registration.c: pjsip outbound
	  registration: Log message says received a 408 when we didn't If
	  the server didn't exist that we are trying to register to the log
	  message would say that a 408 was received from that server when
	  in reality one wasn't. Added log messages stating no response was
	  received if the response does not exist. (closes issue
	  ASTERISK-22554) Reported by: Rusty Newton Review:
	  https://reviewboard.asterisk.org/r/2893/ ........ Merged
	  revisions 400890 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-14 15:01 +0000 [r400882]  Matthew Jordan <mjordan@digium.com>

	* res/res_pjsip_mwi.c, /: Remove duplicate module info block The
	  module info block was repeated twice. Once is sufficient.
	  ........ Merged revisions 400881 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-13 15:42 +0000 [r400873]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_session.c, /: Fix a race condition in
	  res_pjsip_session with rapidly terminating the session. The
	  INVITE session state callback wrongly assumes that a session will
	  always exist, but when rapidly terminating the session this
	  assumption goes out the window. As all handler code for the
	  INVITE session state callback requires the session it will now
	  just exit immediately if no session exists. (closes issue
	  ASTERISK-22668) Reported by: John Bigelow ........ Merged
	  revisions 400872 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-12 16:53 +0000 [r400864]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_pjsip_outbound_authenticator_digest.c: Fix realm
	  comparison for outbound auth When generating the list of
	  authentication credentials to pass to PJSIP, Asterisk was using
	  the raw pointer of a pj_str_t which is not always
	  NULL-terminated. This sometimes resulted in incorrect text for
	  the realm and a failure to match the realm for authentication
	  purposes which was causing the outbound nominal auth pjsip basic
	  call test to bounce. This now uses the pj_str_t that contains the
	  realm instead of generating a new one. Thanks to John Bigelow for
	  helping to narrow this down. ........ Merged revisions 400863
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-11 17:05 +0000 [r400855]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/channel.h, /: channel.h: whitespace changes.
	  ........ Merged revisions 400854 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-11 16:36 +0000 [r400851-400852]  David M. Lee <dlee@digium.com>

	* /, res/ari/resource_bridges.h, rest-api/api-docs/playback.json,
	  rest-api-templates/api.wiki.mustache, res/res_ari_playback.c,
	  rest-api/api-docs/channels.json, res/ari/resource_playback.h,
	  rest-api/api-docs/bridges.json,
	  rest-api-templates/asterisk_processor.py,
	  res/ari/resource_channels.h,
	  rest-api-templates/models.wiki.mustache: Multiple revisions
	  400508,400842-400843,400848 ........ r400508 | dlee | 2013-10-03
	  23:54:51 -0500 (Thu, 03 Oct 2013) | 1 line Corrected response
	  class for stopPlayback ........ r400842 | dlee | 2013-10-10
	  14:23:24 -0500 (Thu, 10 Oct 2013) | 1 line Correct some ARI wiki
	  rendering errors ........ r400843 | dlee | 2013-10-10 14:26:19
	  -0500 (Thu, 10 Oct 2013) | 1 line Updated /play resource docs.
	  The playback of http: resources isn't implemented... yet ........
	  r400848 | dlee | 2013-10-11 11:18:46 -0500 (Fri, 11 Oct 2013) | 5
	  lines Fix a stupid copy/paste error in ARI docs. Patches:
	  ari-doc-patch.txt uploaded by jbigelow (license 5091) ........
	  Merged revisions 400508,400842-400843,400848 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /: Fixed merge tracking for r400360, which was somehow lost

2013-10-11 16:28 +0000 [r400850]  Richard Mudgett <rmudgett@digium.com>

	* bridges/bridge_softmix.c, /: Softmix: Fix crash when switching
	  from softmix to another bridge technology. The crash is caused by
	  a race condition when switching between native RTP and softmix
	  bridging technologies. In this situation, the bridging technology
	  is switched from native RTP to softmix, and then back to native
	  RTP fast enough that the softmix private data gets destroyed
	  before the softmix mixing thread gets started. Thanks to Kinsey
	  Moore for the crash analysis. * Fix race condition when starting
	  the softmix mixing thread and switching to another bridge
	  technology. (closes issue ASTERISK-22678) Reported by: John
	  Bigelow Patches: jira_asterisk_22678_v12.patch (license #5621)
	  patch uploaded by rmudgett Tested by: John Bigelow ........
	  Merged revisions 400849 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-10 18:21 +0000 [r400825-400834]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip/location.c: Perform validation of permanent
	  contacts on AORs in res_pjsip. ........ Merged revisions 400833
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip/pjsip_configuration.c, res/res_pjsip.c: Fix an
	  assertion in res_pjsip when specifying an invalid outbound proxy.
	  This change fixes two issues when setting an outbound proxy: 1.
	  The outbound proxy URI was not parsed and validated during
	  configuration. 2. If an outgoing dialog was created and the
	  outbound proxy could not be set an assertion would occur because
	  the usage count on the dialog was not decremented. The
	  documentation has also been updated to specify that a full URI
	  must be specified for the outbound proxy. (closes issue
	  ASTERISK-22672) Reported by: Antti Yrjola ........ Merged
	  revisions 400824 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-09 11:02 +0000 [r400772-400813]  Matthew Jordan <mjordan@digium.com>

	* res/res_pjsip_header_funcs.c, /: Use 'z' as the format specifier
	  for size_t Using 'lu' will produce a compiler warning for some
	  versions of gcc and on some architectures. 'z' should be portable
	  as a format specifier for size_t. ........ Merged revisions
	  400812 from http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_header_funcs.c (added), /: Add PJSIP_HEADER
	  function for manipulation of SIP headers in the PJSIP stack This
	  patch adds support to the PJSIP stack in Asterisk for SIP header
	  manipulation. Note that this is analagous to
	  SIPAddHeader/SIPRemoveHeader. For PJSIP_HEADER, an incoming
	  supplemental session callback is registered that takes the
	  pjsip_hdrs from the incoming session and stores them in a linked
	  list in the session datastore. Calls to PJSIP_HEADER traverse
	  over the list and return the nth matching header where 'n' is the
	  'number' argument to the function. When adding a header, the
	  first call creates a datastore and linked list and adds the
	  datastore to the session. The header is then created as a
	  pjsip_hdr and added to the list. An outgoing supplemental session
	  callback then traverses the list and adds the headers to the
	  outgoing pjsip_msg. When removing a header, the list created with
	  PJSIP_HEADER(add,...) is traversed and all matching entries are
	  removed. (closes issue ASTERISK-22498) Reported by: George Joseph
	  patch: res_pjsip_header_funcs_v1.patch uploaded by george.joseph
	  (License 6322) ........ Merged revisions 400771 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-08 22:33 +0000 [r400770]  Kinsey Moore <kmoore@digium.com>

	* /, configure, configure.ac: Add warning when compiling with iODBC
	  support When running configure, libiodbc2 development headers
	  will fulfill the requirement for ODBC development headers, but
	  will not function properly. This adds a warning when libiodbc2
	  development headers are detected instead of unixodbc development
	  headers. (closes issue ASTERISK-22459) Reported by: Patrick
	  Maille Tested by: Walter Doekes Patches:
	  issueA22459_warn_when_using_iodbc.patch uploaded by Walter Doekes
	  (License 5674) ........ Merged revisions 400767 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400768 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400769 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-08 21:20 +0000 [r400759]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_agent_pool.c, /: app_agent_pool: Fix AMI/CLI AgentLogoff
	  soft preventing agents from logging back in. * Clear the
	  deferred_logoff flag when an agent logs in. (closes issue
	  ASTERISK-22669) Reported by: John Bigelow ........ Merged
	  revisions 400754 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-08 20:52 +0000 [r400750]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip.c, res/res_pjsip/config_transport.c: Switch from
	  using pjsip_strerror to pj_strerror. pjsip_strerror is only aware
	  of PJSIP-specific error codes. pj_strerror() is aware of all
	  PJProject error codes and OS-specific error codes. This
	  specifically fixes an oft-seen error in transport configuration
	  code where EADDRINUSE would result in "Unknown PJSIP error
	  120098" instead of a useful message. ........ Merged revisions
	  400749 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-08 20:18 +0000 [r400728-400744]  Richard Mudgett <rmudgett@digium.com>

	* configs/confbridge.conf.sample, /,
	  apps/confbridge/include/confbridge.h, apps/app_confbridge.c,
	  CHANGES, apps/confbridge/conf_config_parser.c: app_confbridge:
	  Can now set the language used for announcements to the
	  conference. ConfBridge now has the ability to set the language of
	  announcements to the conference. The language can be set on a
	  bridge profile in confbridge.conf or by the dialplan function
	  CONFBRIDGE(bridge,language)=en. (closes issue ASTERISK-19983)
	  Reported by: Jonathan White Patches: M19983_rev2.diff (license
	  #5138) patch uploaded by junky (modified) Tested by: rmudgett
	  ........ Merged revisions 400741 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400742 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/confbridge/conf_config_parser.c, /: app_confbridge: Fix
	  duplicate default_user profile. * Fixed looking in the wrong
	  profiles container to see if the default_user profile is already
	  created in verify_default_profiles(). The bridge profile
	  container is never going to hold user profiles. :) ........
	  Merged revisions 400723 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400724 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-08 18:19 +0000 [r400684-400704]  Kinsey Moore <kmoore@digium.com>

	* funcs/func_config.c, /: Fix func_config list entry allocation The
	  AST_CONFIG dialplan function defined in func_config.c allocates
	  its config file list entries using ast_malloc. List entry
	  allocations destined for use with Asterisk's linked list API must
	  be ast_calloc()d or otherwise initialized so that list pointers
	  are set to NULL. These uses of ast_malloc have been replaced by
	  ast_calloc to prevent dereferencing of uninitialized pointer
	  values when traversing the list. (closes issue ASTERISK-22483)
	  Reported by: Brian Scott ........ Merged revisions 400694 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400697 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400701 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_rtp_asterisk.c, /: Fix STUN crash when using IPv6 any
	  address Ensure that when chan_sip binds to the IPv6 any address
	  ([::]), IPv4 candidates are also added. (closes issue
	  ASTERISK-21917) Reported by: Torrey Searle Patches:
	  0023_ipv6_stun_crash.patch uploaded by Torrey Searle (License
	  5334) ........ Merged revisions 400681 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400682 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-08 15:44 +0000 [r400683]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip/pjsip_options.c, /: Push CLI qualify into the
	  threadpool. If you run Asterisk in the background and then
	  connect to it through a separate console, the thread that runs
	  CLI commands is not registered with PJLIB. Thus PJLIB does not
	  like it when you attempt to send OPTIONS requests from that
	  thread. So now we push the task into the threadpool, which we
	  know to be registered with PJLIB. Thanks to Antti Yrjola for
	  reporting this. ........ Merged revisions 400680 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-08 15:12 +0000 [r400662-400672]  Richard Mudgett <rmudgett@digium.com>

	* /, res/res_agi.c, apps/app_queue.c: Make app_queue and res_agi
	  independent of AMI being enabled. The
	  https://reviewboard.asterisk.org/r/2888/ review changes manager
	  to not subscribe to stasis when it is disabled for performance
	  reasons. When manager is disabled app_queue and res_agi decline
	  to load and fail to clean up what they have already allocated. *
	  Made app_queue and res_agi clean up allocated resources when they
	  decline to load. * Made app_queue and res_agi use their own
	  subscriptions to the stasis topics instead of borrowing manager's
	  message router structure inappropriately. (closes issue
	  ASTERISK-22604) Reported by: rmudgett Review:
	  https://reviewboard.asterisk.org/r/2902/ ........ Merged
	  revisions 400671 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, include/asterisk/stasis.h, apps/app_queue.c,
	  include/asterisk/manager.h: Miscellaneous stand alone comment
	  cleanups. ........ Merged revisions 400661 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-06 17:13 +0000 [r400625]  Michael L. Young <elgueromexicano@gmail.com>

	* /, apps/app_queue.c: app_queue: Fix Queuelog EXITWITHKEY only
	  logging two of four fields Commit r62462 added two extra fields
	  for logging "the original position the caller entered the queue
	  at, and the amount of time the caller was waiting in the queue."
	  But when r75969 was merged from 1.4 into trunk (r75977), these
	  two fields disappeared. Those two extra fields were not logged in
	  1.4 and when the patch was merged, those fields went away.
	  Therefore, this is a regression and was caught by the reporter
	  because he was reading the awesome "Asterisk: The Definitive
	  Guide" book. (closes issue ASTERISK-22197) Reported by: Dalius M.
	  Tested by: Dalius M. Patches:
	  asterisk-22197-q-log-exitwithkey.diff uploaded by Michael L.
	  Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/2901/ ........ Merged
	  revisions 400622 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400623 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400624 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-05 00:59 +0000 [r400593]  Richard Mudgett <rmudgett@digium.com>

	* /, channels/iax2/include/parser.h: chan_iax2: Fix compile error.
	  ........ Merged revisions 400588 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-04 21:41 +0000 [r400568]  Michael L. Young <elgueromexicano@gmail.com>

	* main/acl.c, include/asterisk/netsock2.h, CHANGES,
	  channels/chan_iax2.c, channels/iax2/parser.c, main/netsock.c,
	  main/netsock2.c, /, channels/iax2/include/parser.h: Add IPv6
	  Support To chan_iax2 This patch adds IPv6 support to chan_iax2.
	  Yay! (closes issue ASTERISK-22025) Patches:
	  iax2-ipv6-v5-reviewboard.diff by Michael L. Young (license 5026)
	  Review: https://reviewboard.asterisk.org/r/2660/ ........ Merged
	  revisions 400567 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-04 19:32 +0000 [r400553]  David M. Lee <dlee@digium.com>

	* rest-api/api-docs/applications.json (added), /: Added missing
	  file from r400522 ........ Merged revisions 400552 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-04 19:11 +0000 [r400533-400543]  Jonathan Rose <jrose@digium.com>

	* res/res_pjsip_logger.c, /: chan_pjsip: Make logger togglable
	  without loading/unloading This patch makes the res_pjsip_logger
	  do a few things... First, it will be built and installed by
	  default now, so end users won't need to enable it in menuselect.
	  Second, while it is loaded, it no longer will immediately issue
	  log messages. Upon loading, it is in the disabled state and must
	  be turned on with the new CLI command. The CLI command 'pjsip set
	  logger <on/off/host> has been added and can be used to do the
	  following: pjsip set logger on: Enables logger for all PJSIP
	  traffic pjsip set logger off: Disables logger for all PJSIP
	  traffic pjsip set logger host <host>: Enables logger for the
	  specific host Review: https://reviewboard.asterisk.org/r/2900/
	  ........ Merged revisions 400542 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /,
	  contrib/ast-db-manage/config/versions/43956d550a44_add_tables_for_pjsip.py
	  (added), configs/extconfig.conf.sample,
	  configs/sorcery.conf.sample,
	  contrib/ast-db-manage/config/versions/4da0c5f79a9c_create_tables.py:
	  chan_pjsip: Add alembic scripts for generating db tables for
	  PJSIP Also updates sample configurations for sorcery and
	  extconfig to demonstrate how to use databases created by that
	  alembic script. (closes issue ASTERISK-22133) Reported by: Matt
	  Jordan Review: https://reviewboard.asterisk.org/r/2892/ ........
	  Merged revisions 400532 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-04 16:01 +0000 [r400523]  Matthew Jordan <mjordan@digium.com>

	* res/res_stasis.c, main/asterisk.c,
	  rest-api/api-docs/endpoints.json, rest-api/api-docs/events.json,
	  res/stasis/app.c, /,
	  rest-api-templates/ari_model_validators.h.mustache,
	  include/asterisk/endpoints.h, res/res_ari_applications.c (added),
	  res/ari/resource_endpoints.h, include/asterisk/stasis_app.h,
	  res/stasis/app.h, rest-api/resources.json,
	  include/asterisk/_private.h, res/ari/ari_model_validators.c,
	  main/endpoints.c, res/ari/ari_model_validators.h, main/json.c,
	  res/res_ari_model.c, res/ari.make,
	  res/ari/resource_applications.c (added),
	  res/ari/resource_applications.h (added): ARI: Add subscription
	  support This patch adds an /applications API to ARI, allowing
	  explicit management of Stasis applications. * GET /applications -
	  list current applications * GET /applications/{applicationName} -
	  get details of a specific application * POST
	  /applications/{applicationName}/subscription - explicitly
	  subscribe to a channel, bridge or endpoint * DELETE
	  /applications/{applicationName}/subscription - explicitly
	  unsubscribe from a channel, bridge or endpoint Subscriptions work
	  by a reference counting mechanism: if you subscript to an event
	  source X number of times, you must unsubscribe X number of times
	  to stop receiveing events for that event source. Review:
	  https://reviewboard.asterisk.org/r/2862 (issue ASTERISK-22451)
	  Reported by: Matt Jordan ........ Merged revisions 400522 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-04 15:49 +0000 [r400511-400521]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip.c: Enclose the To URI and update its user
	  portion if a request user has been specified. ........ Merged
	  revisions 400520 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_session.c, /: Replace the connection address at the
	  SDP level if altering the SDP with the external media address.
	  ........ Merged revisions 400510 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 23:20 +0000 [r400482]  Jonathan Rose <jrose@digium.com>

	* /, channels/chan_sip.c: chan_sip: Don't ignore expires value in
	  contact header if it lacks semicolon (closes issue
	  ASTERISK-22574) Reported by: Filip Jenicek Patches:
	  chan_sip_expires.patch uploaded by Filip Jenicek (license 6277)
	  ........ Merged revisions 400469 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400470 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400471 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 21:46 +0000 [r400461]  Matthew Jordan <mjordan@digium.com>

	* /, main/channel_internal_api.c: Remove publication of a channel
	  snapshot when the technology is set This patch removes said
	  publication for a few reasons: (1) It is unnecessary. Association
	  of the channel technology with a specific channel is an
	  implementation detail that should be assumed to "just happen",
	  and consumers of Stasis don't need to be informed about it. (2)
	  Publication of said message can now cause crashes, as the actual
	  creation of a channel in normal locations now stages its
	  messages. As a result, things that create dummy channels (such as
	  the SIP RTP QOS unit test) and associate them with a channel
	  technology were now crashing, as the channel itself was not known
	  by Stasis. ........ Merged revisions 400460 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 20:22 +0000 [r400452]  Mark Michelson <mmichelson@digium.com>

	* bridges/bridge_native_rtp.c, /,
	  include/asterisk/bridge_technology.h: Fix assumption in
	  bridge_native_rtp.c regarding number of participants in a bridge.
	  When a party leaves a bridge, there may be more participants in
	  the bridge than expected. As such, it is important not to make
	  assumptions regarding the list of channels in a bridge. This
	  change makes it so that when a party leaves a native RTP bridge,
	  we unbridge it and the party it was bridged with. Previously, the
	  first and last channels in the list were unbridged since it was
	  assumed that these were the two channels that had been bridged.
	  As previously stated, a new party had been inserted into the
	  bridge, so this logic did not work properly. (closes issue
	  ASTERISK-22615) reported by Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2899 ........ Merged revisions
	  400403 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 19:32 +0000 [r400443]  Joshua Colp <jcolp@digium.com>

	* /, main/cdr.c: When serializing CDR variables (like for "core
	  show channels") don't output an error if CDRs aren't enabled.
	  ........ Merged revisions 400442 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 19:30 +0000 [r400441]  Kinsey Moore <kmoore@digium.com>

	* /, main/security_events.c: Fix security events for AMI invalid
	  password In r337595, additional security events were added for
	  chan_sip authentication failures. The new IEs added to the
	  existing invalid password event were defined as required IEs, but
	  existing users of the event did not set the new IEs and could not
	  since they didn't apply to existing uses. They are now marked as
	  optional IEs. (closes issue ASTERISK-22578) Reported by: Matt
	  Jordan ........ Merged revisions 400421 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400440 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 19:06 +0000 [r400402]  Joshua Colp <jcolp@digium.com>

	* res/ari/resource_channels.c, /: Fix a crash caused by muting and
	  unmuting a channel in ARI without specifying a direction. (closes
	  issue ASTERISK-22637) Reported by: Scott Griepentrog Patch by
	  Matt Jordan, whose office I have taken over in the name of
	  Canada. ........ Merged revisions 400401 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 18:51 +0000 [r400399]  Richard Mudgett <rmudgett@digium.com>

	* /, main/cel.c: cel: Some whitespace cleanups ........ Merged
	  revisions 400398 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 18:32 +0000 [r400385-400397]  Kinsey Moore <kmoore@digium.com>

	* res/res_rtp_multicast.c, /: res_rtp_multicast: Ensure SSRC is set
	  properly This fixes a bug where the SSRC field on multicast RTP
	  can be stuck at 0 which can cause problems for endpoints trying
	  to make sense of incoming streams. (closes issue ASTERISK-22567)
	  Reported by: Simone Camporeale Patches:
	  22567_res_mulitcast_ssrc.patch uploaded by Simone Camporeale
	  (License 6536) ........ Merged revisions 400393 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400394 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400395 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, configure, include/asterisk/autoconfig.h.in, configure.ac,
	  main/xml.c: Detect and use xsltCleanupGlobals when available This
	  introduces usage of an additional libxslt cleanup function,
	  xsltCleanupGlobals, when the configure script detects that it is
	  available. Early versions of the library did not include this
	  function. (closes issue ASTERISK-22570) Reported by: Corey
	  Farrell Patches: xsltCleanupGlobals.patch uploaded by Corey
	  Farrell (License 5909) ........ Merged revisions 400384 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 16:28 +0000 [r400374]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_vpb.cc, /: chan_vpb: Make compile again. ........
	  Merged revisions 400373 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 14:59 +0000 [r400363-400364]  Mark Michelson <mmichelson@digium.com>

	* tests/test_cel.c, /: Get rid of uses of stasis_topic_wait()
	  ........ Merged revisions 400362 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* pbx/pbx_spool.c, main/manager.c, main/format_cap.c,
	  channels/chan_skinny.c, res/res_agi.c, channels/chan_motif.c,
	  channels/chan_alsa.c, apps/app_confbridge.c,
	  addons/chan_mobile.c, channels/chan_mgcp.c,
	  res/res_clioriginate.c, channels/chan_bridge_media.c,
	  channels/chan_sip.c, tests/test_format_api.c,
	  res/res_pjsip_sdp_rtp.c, bridges/bridge_simple.c,
	  apps/app_originate.c, res/parking/parking_applications.c,
	  main/core_local.c, channels/chan_console.c, channels/chan_oss.c,
	  include/asterisk/format_cap.h, res/res_pjsip_session.c,
	  res/ari/resource_bridges.c, channels/chan_jingle.c,
	  channels/chan_misdn.c, channels/dahdi/bridge_native_dahdi.c,
	  res/res_pjsip/pjsip_configuration.c, main/file.c,
	  channels/chan_h323.c, channels/chan_nbs.c,
	  bridges/bridge_native_rtp.c, tests/test_config.c,
	  res/res_stasis.c, channels/chan_pjsip.c, channels/chan_unistim.c,
	  channels/chan_multicast_rtp.c, addons/chan_ooh323.c,
	  main/rtp_engine.c, /, main/ccss.c, apps/app_meetme.c,
	  bridges/bridge_holding.c, main/bridge_basic.c,
	  bridges/bridge_softmix.c, channels/chan_gtalk.c,
	  channels/chan_iax2.c, main/media_index.c, main/channel.c,
	  channels/chan_phone.c, channels/chan_dahdi.c, main/dial.c: Cache
	  string values of formats on ast_format_cap() to save processing.
	  Channel snapshots have string representations of the channel's
	  native formats. Prior to this change, the format strings were
	  re-created on ever channel snapshot creation. Since channel
	  native formats rarely change, this was very wasteful. Now, string
	  representations of formats may optionally be stored on the
	  ast_format_cap for cases where string representations may be
	  requested frequently. When formats are altered, the string cache
	  is marked as invalid. When strings are requested, the cache
	  validity is checked. If the cache is valid, then the cached
	  strings are copied. If the cache is invalid, then the string
	  cache is rebuilt and copied, and the cache is marked as being
	  valid again. Review: https://reviewboard.asterisk.org/r/2879
	  ........ Merged revisions 400356 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-03 14:52 +0000 [r400361]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip_sdp_rtp.c, res/res_pjsip_t38.c, /: Fix crashes in
	  res_pjsip_sdp_rtp and res_pjsip_t38 when a stream is rejected and
	  external_media_address is set. The callback function for changing
	  the media address in streams wrongly assumes that a connection
	  line will always be present. This is false as no line is present
	  if a stream has been rejected. (closes issue ASTERISK-22645)
	  Reported by: Rusty Newton ........ Merged revisions 400360 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 22:22 +0000 [r400335]  Mark Michelson <mmichelson@digium.com>

	* main/stasis_wait.c (removed), res/ari/resource_endpoints.c, /,
	  include/asterisk/stasis.h, tests/test_cel.c,
	  include/asterisk/stasis_endpoints.h, channels/chan_pjsip.c,
	  main/stasis.c, main/stasis_endpoints.c: Multiple revisions
	  400318-400319 ........ r400318 | mmichelson | 2013-10-02 17:08:49
	  -0500 (Wed, 02 Oct 2013) | 12 lines Remove unnecessary waits from
	  stasis. Since caches are updated on publisher threads, there is
	  no need to wait for the cache updates to occur after a stasis
	  message is published. In the case of chan_pjsip device state
	  changes, this set of changes caused an improvement to
	  performance. Review: https://reviewboard.asterisk.org/r/2890
	  ........ r400319 | mmichelson | 2013-10-02 17:10:54 -0500 (Wed,
	  02 Oct 2013) | 3 lines Remove svn:mergeinfo property. ........
	  Merged revisions 400318-400319 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 21:33 +0000 [r400317]  Michael L. Young <elgueromexicano@gmail.com>

	* channels/chan_iax2.c, /: Cast Integer Argument To Unsigned Char
	  The member reg in the peercnt structure is an unsigned char and
	  peercnt_modify() is expecting an unsigned char argument which
	  gets assigned to peercnt->reg. This patch fixes that by casting
	  the integer argument being passed to peercnt_modify to unsigned
	  char. ........ Merged revisions 400314 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400315 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400316 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 21:26 +0000 [r400313]  Matthew Jordan <mjordan@digium.com>

	* main/cdr.c, main/manager.c, /, main/cel.c: Only create Stasis
	  subscriptions when enabled Subscribing to Stasis isn't free. As
	  such, this patch makes AMI, CDR, and CEL - the "big 3" - only
	  subscribe when enabled. Toggling their availability via a .conf
	  file will unsubscribe/subscribe as appropriate. Review:
	  https://reviewboard.asterisk.org/r/2888/ ........ Merged
	  revisions 400312 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 20:31 +0000 [r400304]  Richard Mudgett <rmudgett@digium.com>

	* main/pbx.c, /: Originate: Make setting caller id on outgoing call
	  use either name or number. Previous code was requiring both name
	  and number to be available. Also restored a comment block on why
	  caller id is also set on an outgoing call leg in addition to
	  connected line from earlier versions of Asterisk. ........ Merged
	  revisions 400303 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 19:20 +0000 [r400295]  Kinsey Moore <kmoore@digium.com>

	* /, rest-api/api-docs/asterisk.json: Correct allowable values for
	  ARI general information filter ........ Merged revisions 400291
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 19:17 +0000 [r400287]  Matthew Jordan <mjordan@digium.com>

	* main/cdr.c, /: Fix the CDR CLI command 'cdr show active
	  {channel}' When the switch from channel names to channel unique
	  IDs happened, the poor CLI command got left in the dust. This
	  fixes the command so that users can once again see how Asterisk
	  is messing up your billing information. ........ Merged revisions
	  400286 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 18:44 +0000 [r400285]  Joshua Colp <jcolp@digium.com>

	* /, res/res_pjsip_t38.c: Fix a crash in res_pjsip_t38 caused by
	  the wrong assumption that a session will always have a channel.
	  When starting up or shutting down this assumption is false.
	  ........ Merged revisions 400284 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 18:28 +0000 [r400282]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, doc/astdb2sqlite3.8 (added), /, doc/astdb2bdb.8
	  (added): man pages for astdb2bdb and astdb2sqlite3 Review:
	  https://reviewboard.asterisk.org/r/2898/ ........ Merged
	  revisions 400279 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400281 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 17:12 +0000 [r400269-400271]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_stack.c, res/stasis_recording/stored.c, main/json.c,
	  main/stasis_cache.c, res/res_ari.c, /, main/utils.c:
	  MALLOC_DEBUG: Fix some misuses of free() when MALLOC_DEBUG is
	  enabled. * There were several places in ARI where an external
	  library was mallocing memory that must always be released with
	  free(). When MALLOC_DEBUG is enabled, free() is redirected to the
	  MALLOC_DEBUG version. Since the external library call still uses
	  the normal malloc(), MALLOC_DEBUG complains that the freed memory
	  block is not registered and will not free it. These cases must
	  use ast_std_free(). * Changed calls to asprintf() and vasprintf()
	  to the equivalent ast_asprintf() and ast_vasprintf() versions
	  respectively. ........ Merged revisions 400270 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/sig_ss7.c, /: sig_ss7: Fix compiler warnings. ........
	  Merged revisions 400268 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-02 16:23 +0000 [r400246-400266]  Joshua Colp <jcolp@digium.com>

	* channels/chan_alsa.c, main/stasis_channels.c, channels/sig_ss7.c,
	  channels/chan_pjsip.c, channels/chan_mgcp.c,
	  channels/chan_unistim.c, apps/app_dial.c, main/pbx.c, /,
	  channels/chan_sip.c, main/bridge.c, include/asterisk/channel.h,
	  channels/chan_gtalk.c, channels/chan_console.c,
	  channels/sig_pri.c, channels/chan_iax2.c, channels/chan_jingle.c,
	  main/channel.c, channels/chan_dahdi.c, main/dial.c,
	  include/asterisk/stasis_channels.h, channels/chan_skinny.c,
	  channels/chan_motif.c: Reduce channel snapshot creation and
	  publishing by up to 50%. This change introduces the ability to
	  stage channel snapshot creation and publishing by suppressing the
	  implicit creation and publishing that some functions have. Once
	  all operations are executed the staging is marked as done and a
	  single snapshot is created and published. Review:
	  https://reviewboard.asterisk.org/r/2889/ ........ Merged
	  revisions 400265 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_session.c, /: Fix a random one way audio issue in
	  PJSIP. Due to the asynchronous design of the PJMEDIA SDP
	  negotiator it was possible for the SDP to be negotiated *after* a
	  channel was created and after it was being wait on by an
	  application. It is only after negotiation occurs that the file
	  descriptors for RTP are placed on the channel. Since the channel
	  was already being waited on these file descriptors were not
	  monitored, causing incoming media to never be read. This change
	  wakes up any application waiting on the channel so that added
	  file descriptors end up being monitored. (closes issue AST-1227)
	  Reported by: John Bigelow ........ Merged revisions 400256 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/stasis/control.c, include/asterisk/stasis_app.h,
	  res/ari/resource_channels.c: Allow specifying a channel to dial
	  an extension and context in an ARI dial operation. (issue
	  ASTERISK-22625) Reported by: Scott Griepentrog ........ Merged
	  revisions 400254 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip_session.c: Retrieve and store the hostname only
	  once so multiple threads do not potentially initialize it at the
	  same time. ........ Merged revisions 400245 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-01 21:19 +0000 [r400228-400237]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_dahdi.c, channels/sig_analog.c, /: chan_dahdi: Fix
	  analog parking using flash-hook. Transferring an analog call
	  using a flash-hook to parking would fail to park the call and
	  result in an invalid ao2 object unref. * Park the correct bridged
	  channel. ........ Merged revisions 400236 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/features_config.c, /: Features: Rearm the parking config
	  options have moved warning for each reload. ........ Merged
	  revisions 400227 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-10-01 15:54 +0000 [r400218]  Matthew Jordan <mjordan@digium.com>

	* main/cdr.c, /: Filter out internal channels for bridge leave
	  messages and parked call messages Granted, if you manage to park
	  a Conference announcer channel, something has gone horrifically
	  wrong. ........ Merged revisions 400217 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-30 21:40 +0000 [r400206]  Jonathan Rose <jrose@digium.com>

	* configs/features.conf.sample, /, configs/res_parking.conf.sample:
	  configuration samples: Pull all parking related stuff out of
	  features.conf This patch also adds documentation for parking from
	  features.conf to res_parking.conf ........ Merged revisions
	  400205 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-30 19:58 +0000 [r400195-400197]  Matthew Jordan <mjordan@digium.com>

	* /, funcs/func_cdr.c: Parse arguments passed to the CDR_PROP
	  function correctly I can only blame this on a bad merge, because
	  this in no way worked properly the way it was written. Mea culpa.
	  The function should now parse its arguments correctly and
	  function properly. (Note that the API used by the CDR_PROP
	  function has working unit tests... this was merely bad coding of
	  the actual registered function) (closes issue ASTERISK-22613)
	  Reported by: Private Name ........ Merged revisions 400196 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/cdr.c, /: Remove spurious event raised when CDRs are
	  reloaded The Reload event is now raised by the module loading
	  core. As such, the Reload event in the CDR engine was a duplicate
	  and not needed. ........ Merged revisions 400194 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-30 18:55 +0000 [r400186]  David M. Lee <dlee@digium.com>

	* tests/test_devicestate.c, include/asterisk/sem.h (added),
	  tests/test_taskprocessor.c, res/res_pjsip_mwi.c,
	  res/res_pjsip/include/res_pjsip_private.h, tests/test_stasis.c,
	  res/parking/parking_manager.c, res/res_security_log.c,
	  channels/chan_mgcp.c, main/stasis_cache_pattern.c, main/pbx.c,
	  include/asterisk/vector.h (added), /, main/ccss.c,
	  apps/app_meetme.c, include/asterisk/taskprocessor.h,
	  configs/stasis.conf.sample (removed), configure.ac,
	  res/parking/parking_applications.c, channels/sig_pri.c,
	  apps/app_queue.c, main/cel.c, main/stasis.c,
	  channels/chan_dahdi.c, funcs/func_presencestate.c,
	  main/stasis_message_router.c, configure,
	  apps/confbridge/confbridge_manager.c, res/res_agi.c,
	  main/manager_system.c, res/res_stasis_test.c, main/sem.c (added),
	  main/manager_channels.c, res/res_pjsip_refer.c,
	  main/manager_mwi.c, apps/app_voicemail.c, main/stasis_cache.c,
	  main/stasis_wait.c, main/stasis_config.c (removed),
	  include/asterisk/stasis_internal.h, res/stasis/app.c,
	  channels/chan_sip.c, include/asterisk/autoconfig.h.in,
	  main/manager_endpoints.c, main/channel_internal_api.c,
	  include/asterisk/stasis.h, main/devicestate.c,
	  main/taskprocessor.c, res/res_xmpp.c, main/sounds_index.c,
	  include/asterisk/stasis_message_router.h, channels/chan_iax2.c,
	  res/res_jabber.c, main/endpoints.c, main/astobj2.c,
	  res/res_chan_stats.c, res/parking/parking_bridge_features.c,
	  tests/test_stasis_endpoints.c, main/cdr.c, main/channel.c,
	  main/manager_bridges.c, main/manager.c, channels/chan_skinny.c:
	  Multiple revisions 399887,400138,400178,400180-400181 ........
	  r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1
	  line Minor performance bump by not allocate manager variable
	  struct if we don't need it ........ r400138 | dlee | 2013-09-30
	  10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines Stasis performance
	  improvements This patch addresses several performance problems
	  that were found in the initial performance testing of Asterisk
	  12. The Stasis dispatch object was allocated as an AO2 object,
	  even though it has a very confined lifecycle. This was replaced
	  with a straight ast_malloc(). The Stasis message router was
	  spending an inordinate amount of time searching hash tables. In
	  this case, most of our routers had 6 or fewer routes in them to
	  begin with. This was replaced with an array that's searched
	  linearly for the route. We more heavily rely on AO2 objects in
	  Asterisk 12, and the memset() in ao2_ref() actually became
	  noticeable on the profile. This was #ifdef'ed to only run when
	  AO2_DEBUG was enabled. After being misled by an erroneous comment
	  in taskprocessor.c during profiling, the wrong comment was
	  removed. Review: https://reviewboard.asterisk.org/r/2873/
	  ........ r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep
	  2013) | 24 lines Taskprocessor optimization; switch Stasis to use
	  taskprocessors This patch optimizes taskprocessor to use a
	  semaphore for signaling, which the OS can do a better job at
	  managing contention and waiting that we can with a mutex and
	  condition. The taskprocessor execution was also slightly
	  optimized to reduce the number of locks taken. The only
	  observable difference in the taskprocessor implementation is that
	  when the final reference to the taskprocessor goes away, it will
	  execute all tasks to completion instead of discarding the
	  unexecuted tasks. For systems where unnamed semaphores are not
	  supported, a really simple semaphore implementation is provided.
	  (Which gives identical performance as the original taskprocessor
	  implementation). The way we ended up implementing Stasis caused
	  the threadpool to be a burden instead of a boost to performance.
	  This was switched to just use taskprocessors directly for
	  subscriptions. Review: https://reviewboard.asterisk.org/r/2881/
	  ........ r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep
	  2013) | 28 lines Optimize how Stasis forwards are dispatched This
	  patch optimizes how forwards are dispatched in Stasis.
	  Originally, forwards were dispatched as subscriptions that are
	  invoked on the publishing thread. This did not account for the
	  vast number of forwards we would end up having in the system, and
	  the amount of work it would take to walk though the forward
	  subscriptions. This patch modifies Stasis so that rather than
	  walking the tree of forwards on every dispatch, when forwards and
	  subscriptions are changed, the subscriber list for every topic in
	  the tree is changed. This has a couple of benefits. First, this
	  reduces the workload of dispatching messages. It also reduces
	  contention when dispatching to different topics that happen to
	  forward to the same aggregation topic (as happens with all of the
	  channel, bridge and endpoint topics). Since forwards are no
	  longer subscriptions, the bulk of this patch is simply changing
	  stasis_subscription objects to stasis_forward objects (which,
	  admittedly, I should have done in the first place.) Since this
	  required me to yet again put in a growing array, I finally
	  abstracted that out into a set of ast_vector macros in
	  asterisk/vector.h. Review:
	  https://reviewboard.asterisk.org/r/2883/ ........ r400181 | dlee
	  | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines Remove
	  dispatch object allocation from Stasis publishing While looking
	  for areas for performance improvement, I realized that an unused
	  feature in Stasis was negatively impacting performance. When a
	  message is sent to a subscriber, a dispatch object is allocated
	  for the dispatch, containing the topic the message was published
	  to, the subscriber the message is being sent to, and the message
	  itself. The topic is actually unused by any subscriber in
	  Asterisk today. And the subscriber is associated with the
	  taskprocessor the message is being dispatched to. First, this
	  patch removes the unused topic parameter from Stasis subscription
	  callbacks. Second, this patch introduces the concept of
	  taskprocessor local data, data that may be set on a taskprocessor
	  and provided along with the data pointer when a task is pushed
	  using the ast_taskprocessor_push_local() call. This allows the
	  task to have both data specific to that taskprocessor, in
	  addition to data specific to that invocation. With those two
	  changes, the dispatch object can be removed completely, and the
	  message is simply refcounted and sent directly to the
	  taskprocessor. Review: https://reviewboard.asterisk.org/r/2884/
	  ........ Merged revisions 399887,400138,400178,400180-400181 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-30 15:57 +0000 [r400142]  Kinsey Moore <kmoore@digium.com>

	* /, channels/chan_sip.c, configs/pjsip.conf.sample,
	  res/res_pjsip_outbound_registration.c, configs/sip.conf.sample,
	  CHANGES: chan_sip: Allow Asterisk to retry after 403 on register
	  This adds a global option in chan_sip to allow it to continue
	  attempting registration if a 403 is received, clearing the cached
	  nonce and treating it as a non-fatal response. Normally, this
	  would cause registration attempts to that endpoint to stop. This
	  also adds a similar per-outbound-registration option to
	  chan_pjsip which allows the retry interval to be altered for 403
	  responses to REGISTER requests. (closes issue ASTERISK-17138)
	  Review: https://reviewboard.asterisk.org/r/2874/ Reported by:
	  Rudi ........ Merged revisions 400137 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400140 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400141 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-28 22:57 +0000 [r400059-400122]  Matthew Jordan <mjordan@digium.com>

	* /, res/res_pjsip_notify.c, configs/pjsip_notify.conf.sample
	  (added): res_pjsip_notify: Add documentation We forgot to add
	  documentation for res_pjsip_notify, which would prevent it from
	  being loaded. Whoops. This patch also updates res_pjsip_notify to
	  use pjsip_notify.conf, which now has its own sample file in the
	  configs directory as well. Review:
	  https://reviewboard.asterisk.org/r/2835/ ........ Merged
	  revisions 400121 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Correct erroneous
	  lost packet information in RTCP reports RTCP's calculation of the
	  number of lost packets in an RTP stream is based on that stream's
	  sequence number count, the number of received packets, and how
	  many packets we expect to receive. When the SSRC for an RTP
	  stream changes, there can - and almost always will be - a large
	  jump in the next packet's timestamp and sequence number. If we
	  don't reset the number of received packets, sequence number
	  count, and other metrics used by RTCP, the next RR/SR report will
	  use the previous SSRC's values to calculate the lost packet count
	  for the new SSRC - resulting in a very large number of lost
	  packets. This patch modifies res_rtp_asterisk such that, if it
	  detects a SSRC change, it will reset the various values used by
	  the RTCP calculations. From the perspective of RTCP, this appears
	  as a new media stream - which is what it is. Review:
	  https://reviewboard.asterisk.org/r/2886/ (closes issue AST-1174)
	  Reported by: Thomas Arimont ........ Merged revisions 400089 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400093 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400108 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, configure, configure.ac: Add check for openSUSE when detecting
	  bfd library In ASTERISK-17842, some additional library checks
	  were added to the configure script so that the bfd library could
	  be found on CentOS and Fedora systems. As it turns out, openSUSE
	  requires an additional library. This patch adds another check to
	  the configure script for openSUSE that will add that library.
	  Review: https://reviewboard.asterisk.org/r/2885/ (closes issue
	  AST-1169) Reported by: Guenther Kelleter ........ Merged
	  revisions 400073 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400075 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400077 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/cdr.c, /: CDR: Improve handling of parking; resolve
	  assertion when originating into park This patch covers two
	  problems: 1) Currently, when a call is transferred into a parking
	  lot from a bridge (using either the blind transfer or one touch
	  parking mechanisms), the application fails to be set to "Park" in
	  the resulting CDR record for the parked channel. This is due to
	  the ParkedCall message arriving before the BridgeEnter for the
	  channel entering the parking bridge. The ParkedCall message isn't
	  handled as the CDR for the channel has already been finalized
	  (due to the channel having left its two party bridge), and the
	  BridgeEnter - which creates the new CDR - doesn't have the
	  parking information. This patch modifies the behavior so that
	  reception of a ParkedCall message will - if not handled by a CDR
	  chain - cause a new CDR to be created and put into the Parking
	  state. 2) It fixes a FRACK that occurred when a channel is
	  originated into a parking space. The DialedPending state - which
	  occurs for both Dialed and Originated channels - assumed that it
	  couldn't handle the parking transitions due to it having a Party
	  B; however, Originated channels don't have a Party B. As such,
	  the existing CDR needs to transition into the parking state -
	  this patch does that. Review:
	  https://reviewboard.asterisk.org/r/2877/ (closes issue
	  ASTERISK-22482) Reported by: Richard Mudgett ........ Merged
	  revisions 400062 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, apps/app_queue.c: app_queue: Make manager events tolerant of
	  Local channel shenanigans app_queue currently attempts to handle
	  Local channel optimizations in an effort to provide accurate
	  information in Stasis messages (and their corresponding AMI
	  events) as well as the Queue log. Sometimes, however, things
	  don't go as planned. Consider the following scenario: SIP/foo <->
	  L;1 <-> L;2 <-> SIP/agent SIP/agent answers, triggering a Local
	  channel optimization. app_queue will normally do the following: *
	  Listen for the Local optimization events and update our agent
	  accordingly to SIP/agent in the queue log and messages * When we
	  get a hangup, publish the AgentComplete event based on our
	  information (SIP/foo and SIP/agent) However, as with all things
	  that depend on sanity from something as capricious as Local
	  channels, things can go wrong: (1) SIP/agent immediately hangs up
	  upon answering. This triggers a race condition between
	  termination messages coming from SIP/agent and the ongoing Local
	  channel optimization messages. (Note that this can also occur
	  with SIP/foo) (2) In a race condition, Asterisk can (rarely)
	  deliver the hangup messages prior to the Local channel
	  optimization. In that case, the messages *may* arrive to
	  app_queue in the following order: * Hangup SIP/Agent * Hangup
	  SIP/foo * Optimize L;1/L;2 * Hangup L;2 * Hangup L;1 When
	  app_queue receives the hangup of the agent or the caller, it will
	  attempt to publish the AgentComplete event. However, it now has a
	  problem - it thinks its agent is the ;1 side of the Local
	  channel, as it never received the optimization event. At the same
	  time, that channel is already gone. This results in getting NULL
	  from the Stasis cache. What's more, we can't really wait for the
	  optimization message, as we are currently handling the hangup of
	  the channel that the optimization event would tell us to use.
	  This patch modifies the behavior in app_queue such that, since we
	  still have a lot of pertinent queue information (interface, queue
	  name, etc.), we now raise the event with what information we
	  know. The channels involved now may or may not be present. Users
	  will still at least get the "AgentComplete" event, which
	  "completes" the known Agent information. Review:
	  https://reviewboard.asterisk.org/r/2878/ (closes issue
	  ASTERISK-22507) Reported by: Richard Mudgett ........ Merged
	  revisions 400060 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/manager.c, /: manager: Fix crash when appending a manager
	  channel variable In r399887, a minor performance improvement was
	  introduced by not allocating the manager variable struct if it
	  wasn't used. Unfortunately, when directly accessing an
	  ast_channel struct, manager assumed that the struct was always
	  allocated. Since this was no longer the case, things got a bit
	  crashy. This fixes that problem by simply bypassing appending
	  variables if the manager channel variable struct isn't there.
	  ........ Merged revisions 400058 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-27 21:58 +0000 [r400016-400021]  Richard Mudgett <rmudgett@digium.com>

	* apps/app_cdr.c, res/res_parking.c, /: app_cdr and res_parking:
	  Fix some resource leaks. * app_cdr left the ResetCDR application
	  registered. * res_parking leaked a ref to config global. (closes
	  issue ASTERISK-22566) Reported by: Corey Farrell Patches:
	  ASTERISK-22566-r2.patch (license #5909) patch uploaded by Corey
	  Farrell ........ Merged revisions 400020 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/sip/reqresp_parser.c, /, channels/chan_sip.c: chan_sip:
	  Increase some scratch buffer sizes dealing with caller id. *
	  Eliminated an unnecessary initialization in check_user_full().
	  (closes issue ASTERISK-22477) Reported by: Michael Shepelev
	  ........ Merged revisions 400013 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 400014 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 400015 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-27 19:18 +0000 [r400000]  Sean Bright <sean@malleable.com>

	* configs/sip.conf.sample: Remove some trailing whitespace and
	  steal revision 400000.

2013-09-27 18:28 +0000 [r399991]  Kevin Harwell <kharwell@digium.com>

	* /, res/res_pjsip.c, res/res_pjsip_session.c,
	  include/asterisk/res_pjsip.h, res/res_pjsip.exports.in:
	  res_pjsip: crash when using localnet and
	  external_signaling_address options There was a collision of
	  mod_data use on the transaction between using a nat hook and an
	  session response callback. During state change it was assumed
	  what was in the mod_data was nothing or the response callback.
	  However, it was possible for it to also contain a nat hook thus
	  resulting in a bad cast and a crash. Added the ability to store
	  multiple data elements in mod_data via a hash table. In this
	  instance, mod_data now stores a hash table of the two values that
	  can be retrieved using an associated string key. (closes issue
	  ASTERISK-22394) Reported by: Rusty Newton Review:
	  https://reviewboard.asterisk.org/r/2843/ ........ Merged
	  revisions 399990 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-27 17:46 +0000 [r399978]  Jonathan Rose <jrose@digium.com>

	* channels/sip/include/sip.h, /, channels/chan_sip.c: chan_sip:
	  Reject calls on 200 OKs if no SDP has been received When Asterisk
	  receives a 200 OK in response to an invite, that peer should have
	  sent an SDP at some point by then. If the channel has never
	  received an SDP, media won't have been set and the remote address
	  won't be known. Endpoints in general should not be doing this.
	  This patch makes it so that Asterisk will simply hang up a call
	  if it sends a 200 OK at this point. So far this odd behavior for
	  endpoints has only been observed in tests which involved manually
	  created SIP transactions in SIPp. (closes issue ASTERISK-22424)
	  Reported by: Jonathan Rose Review:
	  https://reviewboard.asterisk.org/r/2827/ ........ Merged
	  revisions 399939 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 399962 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399976 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-27 17:11 +0000 [r399938]  Richard Mudgett <rmudgett@digium.com>

	* include/asterisk/astobj2.h, tests/test_astobj2.c, main/astobj2.c,
	  /: astobj2: Remove OBJ_CONTINUE support. OBJ_CONTINUE was a
	  strange feature that came into the world under suspicious
	  circumstances to support an abuse of the ao2_container by
	  chan_iax2. Since chan_iax2 no longer uses OBJ_CONTINUE, it is
	  safe to remove it. The simplified code should help performance
	  slightly and make understanding the code easier. Review:
	  https://reviewboard.asterisk.org/r/2887/ ........ Merged
	  revisions 399937 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-27 14:35 +0000 [r399925]  Mark Michelson <mmichelson@digium.com>

	* /, bridges/bridge_native_rtp.c: Fix refleaks of ast_rtp_instance
	  structures. These refleaks were causing bridged calls not to
	  close their RTP ports. Thus a call would leave open 4 ports (RTP
	  for party A, RTCP for party A, RTP for party B, and RTCP for
	  party B). This led to an eventual depletion of available RTP
	  ports. ........ Merged revisions 399924 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-27 14:08 +0000 [r399913]  Kinsey Moore <kmoore@digium.com>

	* tests/test_cel.c, main/cel.c, /, include/asterisk/cel.h: Restore
	  usefulness of the CEL Peer field This change makes the CEL peer
	  field useful again for BRIDGE_ENTER and BRIDGE_EXIT events and
	  fills the field with a comma-separated list of all channels in
	  the bridge other than the channel that is entering or exiting the
	  bridge. Review: https://reviewboard.asterisk.org/r/2840/ (closes
	  issue ASTERISK-22393) ........ Merged revisions 399912 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-26 18:51 +0000 [r399898]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_registrar.c, include/asterisk/res_pjsip.h,
	  res/res_pjsip.exports.in, /, res/res_pjsip/security_events.c:
	  pjsip: race condition in registrar While handling a registration
	  request a race condition could occur if/when two+ clients
	  registered at the same time. This happened when one request
	  obtained a copy of the current contacts for an AOR and another
	  request did the same before the first request updated. Thus the
	  second would update and overwrite the first (or vice-versa
	  depending on which actually updated first). In the case of it
	  being the same contact two "add" events would be raised. pjsip
	  registration handling is now serialized to alleviate this issue.
	  (closes issue AST-1213) Reported by: John Bigelow Review:
	  https://reviewboard.asterisk.org/r/2860/ ........ Merged
	  revisions 399897 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-26 14:13 +0000 [r399875]  Rusty Newton <rnewton@digium.com>

	* /, apps/app_dial.c: Adding a few words to the Dial option 'r'
	  help text to clarify its tone argument description ........
	  Merged revisions 399874 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-25 20:38 +0000 [r399844]  Richard Mudgett <rmudgett@digium.com>

	* channels/sig_ss7.c, channels/chan_dahdi.c, /: chan_dahdi: CLI
	  "core stop gracefully" has needless delay for PRI and SS7. The
	  PRI and SS7 link control threads are not stopped correctly when
	  the chan_dahdi.so module is unloaded. The link control threads
	  pri_dchannel() and ss7_linkset() are not awakened from a poll()
	  to cancel the thread. * Added a SIGURG signal after requesting
	  the thread cancel to break the link control thread poll()
	  immediately. For SS7 it was slightly worse, the link poll()
	  timeout would always be whatever was the last libss7 scheduled
	  event time used. If no libss7 scheduled event was pending, the
	  thread could run more often than necessary. * Set nextms to 60
	  seconds for the ss7_linkset() poll() if there is no other libss7
	  scheduled event. ........ Merged revisions 399818 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 399834 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399842 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-25 19:43 +0000 [r399799]  Rusty Newton <rnewton@digium.com>

	* /, res/res_pjsip.c: Broke the build - Fixing XML DTD violation
	  added in r399782, missing <para> tags inside a <note> ........
	  Merged revisions 399798 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-25 19:29 +0000 [r399797]  Michael L. Young <elgueromexicano@gmail.com>

	* /, channels/chan_sip.c: chan_sip: Fix Realtime Peer Update
	  Problem When Un-registering And Expires Header In 200ok 1st Issue
	  When a realtime peer sends an un-REGISTER request, Asterisk
	  un-registers the peer but the database table record still has
	  regseconds and fullcontact for the peer. This results in calls
	  attempting to be routed to the peer which is no longer
	  registered. The expected behavior is to get busy/congested when
	  attempting to call an un-registered peer through the dialplan.
	  What was discovered is that we are clearing out the peer's
	  registration in the database in parse_register_contact() when
	  calling expire_register() but then upon returning from
	  parse_register_contact(), update_peer() is run which stores back
	  in the database table regseconds and fullcontact. 2nd Issue The
	  reporter pointed out that the 200 ok being returned by Asterisk
	  after un-registering a peer contains a Contact header with
	  ;expires= and the Expires header is not set to 0. This is
	  actually a regression. Tests were created for this second issue
	  (ASTERISK-22548). The tests have been reviewed and a Ship It! was
	  received on those tests. This patch does the following: * Do not
	  ignore the Expires header value even when it is set to 0. The
	  patch sets the pvt->expiry earlier on in the function so that it
	  is set properly and used. * If pvt->expiry is 0, do not call
	  update_peer since that means the peer has already been
	  un-registered and there is no need to update the database record
	  again since nothing has changed. (closes issue ASTERISK-22428)
	  Reported by: Ben Smithurst Tested by: Ben Smithurst, Michael L.
	  Young Patches:
	  asterisk-22428-rt-peer-update-and-expires-header.diff by Michael
	  L. Young (license 5026) Review:
	  https://reviewboard.asterisk.org/r/2869/ ........ Merged
	  revisions 399794 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 399795 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399796 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-25 18:38 +0000 [r399782]  Rusty Newton <rnewton@digium.com>

	* /, res/res_pjsip.c: Fixing documentation for the configOption
	  "external_media_address" of both Endpoints and Transports
	  Re-using some of Mark Michelson's text from an E-mail discussion
	  for: * Modifying synopsis for both options * Adding description
	  to both options * Changing name of "external_media_address" for
	  Endpoint configuration to "media_address" in anticipation of the
	  option name being changed. (As it is not really specific to
	  external destinations) (issue ASTERISK-22405) (closes issue
	  ASTERISK-22405) Reported by: Rusty Newton Review:
	  https://reviewboard.asterisk.org/r/2850/ ........ Merged
	  revisions 399781 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-24 22:55 +0000 [r399737-399750]  Richard Mudgett <rmudgett@digium.com>

	* /, main/astobj2.c: astobj2: Made use OBJ_SEARCH_xxx identifiers
	  as field enum values internally. * Made ao2_unlink to protect
	  itself from stray OBJ_SEARCH_xxx values passed in. ........
	  Merged revisions 399749 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_iax2.c, /: chan_iax2: Prevent some needless
	  breaking of the native IAX2 bridge. * Clean up some twisted code
	  in the iax2_bridge() loop. * Add AST_CONTROL_VIDUPDATE and
	  AST_CONTROL_SRCCHANGE to a list of frames to prevent the native
	  bridge loop from breaking. * Passing the
	  AST_CONTROL_T38_PARAMETERS frame should also allow FAX over a
	  native IAX2 bridge. (issue ABE-2912) Review:
	  https://reviewboard.asterisk.org/r/2870/ ........ Merged
	  revisions 399697 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 399708 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 For v12 and
	  above this is really just documentation until IAX2 native
	  bridging is restored. ........ Merged revisions 399736 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-24 19:22 +0000 [r399667-399696]  Matthew Jordan <mjordan@digium.com>

	* apps/app_queue.c, /: app_queue: Don't be quite so aggressive in
	  initializing the array We only need the first character. ........
	  Merged revisions 399695 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/app_queue.c, /: app_queue: Initialize array holding
	  MixMonitor exec options If the channel variable MONITOR_EXEC is
	  set, app_queue will pass the specified execution parameters to
	  the MixMonitor application when a queue is recorded. If that
	  channel variable is not set, the buffer that holds the escaped
	  value was not being initialized to NULL, and so would be passed
	  to the MixMonitor application with garbage. Hilarity ensued as
	  app_mixmonitor attempted to execute gobeldy-gook. ........ Merged
	  revisions 399681 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/stasis_bridges.c, tests/test_cdr.c, main/cdr.c, /: Fix a
	  performance problem CDRs There is a large performance price
	  currently in the CDR engine. We currently perform two
	  ao2_callback calls on a container that has an entry for every
	  channel in the system. This is done to create matching pairs
	  between channels in a bridge. As such, the portion of the CDR
	  logic that this patch deals with is how we make pairings when a
	  channel enters a mixing bridge. In general, when a channel enters
	  such a bridge, we need to do two things: (1) Figure out if anyone
	  in the bridge can be this channel's Party B. (2) Make pairings
	  with every other channel in the bridge that is not already our
	  Party B. This is a two step process. In the first step, we look
	  through everyone in the bridge and see if they can be our Party B
	  (single_state_process_bridge_enter). If they can - yay! We mark
	  our CDR as having gotten a Party B. If not, we keep searching. If
	  we don't find one, we wait until someone joins who can be our
	  Party B. Step 2 is where we changed the logic
	  (handle_bridge_pairings and bridge_candidate_process).
	  Previously, we would first find candidates - those channels in
	  the bridge with us - from the active_cdrs_by_channel container.
	  Because a channel could be a candidate if it was Party B to an
	  item in the container, the code implemented multiple
	  ao2_container callbacks to get all the candidates. We also had to
	  store them in another container with some other meta information.
	  This was rather complex and costly, particularly if you have 300
	  Local channels (600 channels!) going at once. Luckily, none of it
	  is needed: when a channel enters a bridge (which is when we're
	  figuring all this stuff out), the bridge snapshot tells us the
	  unique IDs of everyone already in the bridge. All we need to do
	  is: For all channels in the bridge: If the channel is us or our
	  Party B that we got in step 1, skip it Compare us and the
	  candidate to figure out who is Party A (based on some specific
	  rules) If we are Party A: Make a new CDR for us, append it to our
	  chain, and set the candidate as Party B If they are Party A: If
	  they don't have a Party B: Make a new CDR for them, append us to
	  their chain, and us as Party B Otherwise: Copy us over as Party B
	  on their existing CDR. This patch does that. Because we now use
	  channel unique IDs to find the candidates during bridging,
	  active_cdrs_by_channel now looks up things using uniqueid instead
	  of channel name. This makes the more complex code simpler; it
	  does, however, have the drawback that dialplan applications and
	  functions will be slightly slower as they have to iterate through
	  the container looking for the CDR by name. That's a small price
	  to pay however as the bridging code will be called a lot more
	  often. This patch also does two other minor changes: (1) It
	  reduces the container size of the channels in a bridge snapshot
	  to 1. In order to be predictable for multi-party bridges, the
	  order of the channels in the container must be stable; that is,
	  it must always devolve to a linked list. (2) CDRs and the
	  multi-party test was updated to show the relationship between two
	  dialed channels. You still want to know if they talked -
	  previously, dialed channels were always ignored, which is wrong
	  when they have managed to get a Party B. (closes issue
	  ASTERISK-22488) Reported by: Richard Mudgett Review:
	  https://reviewboard.asterisk.org/r/2861/ ........ Merged
	  revisions 399666 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-23 12:03 +0000 [r399625]  Joshua Colp <jcolp@digium.com>

	* res/res_pjsip.c, res/res_pjsip_session.c, /: Fix crash in
	  res_pjsip on load if error occurs, and prevent unloading of
	  res_pjsip and res_pjsip_session. During load time in res_pjsip if
	  an error occurred the operation would attempt to rollback all
	  operations done during load. This is not permitted by PJSIP as it
	  will assert if the operation has not been done. This fix changes
	  the code so it will only rollback what has been initialized
	  already. Further changes also prevent res_pjsip and
	  res_pjsip_session from being unloaded. This is due to limitations
	  within PJSIP itself. The library environment can only be changed
	  to a certain extent and does not provide the ability, currently,
	  to deinitialize certain required functionality. (closes issue
	  ASTERISK-22474) Reported by: Corey Farrell ........ Merged
	  revisions 399624 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-21 04:49 +0000 [r399578-399608]  Richard Mudgett <rmudgett@digium.com>

	* res/res_rtp_asterisk.c, /: res_rtp_asterisk: Fix ref leaks in
	  ast_rtcp_read(). Moved rtcp_report RAII_VAR declaration into the
	  loop so it is unref'ed after every loop. Moved message_blob to
	  loop and switched it to a regular variable. The regular variable
	  was used since message_blob is used in a very contained way.
	  (closes issue ASTERISK-22565) Reported by: Corey Farrell Patches:
	  rtcp_report-leak.patch (license #5909) patch uploaded by Corey
	  Farrell Tested by: Corey Farrell ........ Merged revisions 399607
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/media_index.c: media_index: Fix
	  process_description_file() memory leak of file_id_persist.
	  ........ Merged revisions 399596 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/features_config.c: features_config: Fix config ref leak
	  of parkinglots. This leak happend for just about every channel
	  created. ........ Merged revisions 399585 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, apps/app_queue.c: app_queue: Fix json blob ref leak. The json
	  ref from queue_member_blob_create() was never released. ........
	  Merged revisions 399583 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/json.c, /: json: Make it obvious that ast_json_unref() is
	  NULL safe. It looked like the safety check was done after the
	  NULL pointer was used. ........ Merged revisions 399576 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-20 22:44 +0000 [r399566]  Kinsey Moore <kmoore@digium.com>

	* main/config_options.c, /: Ensure global types in the config
	  framework are initialized If a config object was allocated but
	  one of its global objects was never encountered, then the global
	  object's defaults were never applied. Ensure that global objects
	  are initialized properly upon allocation instead of on
	  configuration. Review: https://reviewboard.asterisk.org/r/2866/
	  ........ Merged revisions 399564 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399565 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-20 22:06 +0000 [r399554]  Jonathan Rose <jrose@digium.com>

	* main/dial.c, /: originate/call forwarding: Fix a crash when
	  forwarding a call from originate (closes issue ASTERISK-22487)
	  Reported by: David M. Lee Review:
	  https://reviewboard.asterisk.org/r/2868/ ........ Merged
	  revisions 399553 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-20 16:18 +0000 [r399533]  Joshua Colp <jcolp@digium.com>

	* /, channels/chan_pjsip.c: Add a missing session supplement
	  unregistration in chan_pjsip for ACKs. (closes issue
	  ASTERISK-22453) Reported by: Corey Farrell Patches:
	  chan_pjsip_session_unregister_supplement.patch uploaded by Corey
	  Farrell (license 5909) ........ Merged revisions 399531 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-20 14:26 +0000 [r399515]  Kevin Harwell <kharwell@digium.com>

	* /, main/logger.c: Fix memory leak in logger. Fixed a memory leak
	  discovered in the logger where a temporary string buffer was not
	  being freed. (closes issue ASTERISK-22540) Reported by: John
	  Hardin ........ Merged revisions 399513 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399514 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-19 23:20 +0000 [r399503]  Richard Mudgett <rmudgett@digium.com>

	* /, main/optional_api.c: optional_api: Make always use the
	  standard malloc functions even with MALLOC_DEBUG. ........ Merged
	  revisions 399501 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-19 17:01 +0000 [r399459]  Jonathan Rose <jrose@digium.com>

	* /, channels/chan_sip.c: chan_sip: Make direct media reinvites for
	  T38 put Asterisk in the media path Prior to this patch, Asterisk
	  would incorrectly use the previous endpoint addresses in SDP in
	  spite of providing its own port. T38 is never meant to be done
	  through directmedia and Asterisk should always be in the media
	  path for these streams. (closes issue ASTERISK-17273) Reported
	  by: Kevin Stewart (closes issue ASTERISK-18706) Reported by:
	  Jeremy Kister Review: https://reviewboard.asterisk.org/r/2853/
	  ........ Merged revisions 399456 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 399457 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399458 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-18 20:04 +0000 [r399405]  Kinsey Moore <kmoore@digium.com>

	* /, main/abstract_jb.c: Fix jitter buffer log file creation This
	  adjusts '/'-to-'#' replacement to replace all instances of '/'
	  instead of just the first to ensure that the jitter buffer log
	  file gets the correct name as per Richard Kenner's suggestion.
	  (closes issue ASTERISK-21036) Reported by: Richard Kenner
	  ........ Merged revisions 399402 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 399403 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399404 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-18 17:23 +0000 [r399368-399378]  Matthew Jordan <mjordan@digium.com>

	* /, build_tools/prep_tarball: Update prep_tarball with new
	  documentation files on the Asterisk wiki This will now pull both
	  a command reference for the version being prepared, as well as an
	  Admin Guide that applies to all versions of Asterisk. (issue
	  ASTERISK-22439) Reported by: Olle Johansson ........ Merged
	  revisions 399351 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 399373 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399376 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, bridges/bridge_softmix.c: Add a WARNING in bridge_softmix when
	  a timing module isn't loaded If bridge_softmix fails to be
	  created because no timing source is present in Asterisk, this
	  will currently fail gracefully but with (most likely) a generic
	  error message by whatever module tried to create the softmix
	  bridge. This patch adds a more explicit warning so you can
	  actually diagnose and fix the problem. Review:
	  https://reviewboard.asterisk.org/r/2857/ ........ Merged
	  revisions 399353 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399365 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-18 17:15 +0000 [r399352]  Richard Mudgett <rmudgett@digium.com>

	* main/config_options.c: Make config framework able to reload
	  module configs with multiple config files. The config framework
	  is supposed to be able to load configs that come from multiple
	  config files. The principle example is chan_sip's sip.conf and
	  users.conf. Unfortunately, it only does this correctly on initial
	  load. This patch causes the module's config to be reloaded
	  entirely if any of the config files change. (closes issue
	  ASTERISK-22009) Reported by: Richard Mudgett Review:
	  https://reviewboard.asterisk.org/r/2859/

2013-09-18 14:56 +0000 [r399340]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_messaging.c, /: res_pjsip_messaging: Register
	  message technology as pjsip pjsip's message technology was being
	  registered as 'sip', which was causing it to not load due it
	  conflicting with chan_sip's registered 'sip' technology for
	  messaging. It now registers as 'pjsip'. However, due to this
	  change the "to" field for outgoing pjsip messages need to be
	  prefixed with 'pjsip:' instead of 'sip:'. Incoming messages to
	  res_pjsip_messaging will automatically have their "to" fields
	  altered in order to accommodate the change. Outgoing messages
	  also handle changing it back to 'sip' before being sent so the
	  pjsip library will properly handle it. (closes issue
	  ASTERISK-22445) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2833/ ........ Merged
	  revisions 399339 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-18 00:13 +0000 [r399295]  Michael L. Young <elgueromexicano@gmail.com>

	* /, main/features_config.c: Fix Segfault In features-config.c When
	  Application Has No Arguments Some applications do not require
	  arguments. Therefore, when parsing application maps in
	  features.conf, it is possible that app_data will be set to NULL.
	  * This patch sets app_data to "" if it is NULL. Review:
	  https://reviewboard.asterisk.org/r/2804 ........ Merged revisions
	  399294 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-17 23:10 +0000 [r399284]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_sdp_rtp.c, res/res_pjsip/pjsip_configuration.c,
	  res/res_pjsip_t38.c, include/asterisk/res_pjsip.h, /: Change the
	  "external_media_address" PJSIP endpoint option to
	  "media_address". The endpoint option does not apply to
	  communication with external entities. Rather, the option is
	  applied to all communications with the endpoint. The
	  external_media_address transport configuration option may
	  override the endpoint option if it turns out that we are going to
	  be communicating with an external entity. Two things of note: 1)
	  I have not updated the XML documentation. This is being taken
	  care of by Rusty as part of his work on issue ASTERISK-22405 2)
	  This commit is likely to cause testsuite failures since there are
	  tests that use the external_media_address endpoint option, and
	  they will need to be changed over. Well, I'm planning to get that
	  updated ASAP after this commit. (closes issue ASTERISK-22528)
	  reported by Rusty Newton ........ Merged revisions 399283 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-17 18:44 +0000 [r399269]  Kevin Harwell <kharwell@digium.com>

	* main/logger.c, main/asterisk.c, /: Remote console: more output
	  discrepancies The remote console continued to have issues with
	  its output. In this case CLI command output would either not show
	  up (if verbose level = 0) or would contain verbose prefixes (if
	  verbose level > 0) once log messages were sent to the remote
	  console. The fix now now adds verbose prefix data to all new
	  lines contained in a verbose log string. (closes issue
	  ASTERISK-22450) Reported by: David Brillert (closes issue
	  AST-1193) Reported by: Guenther Kelleter Review:
	  https://reviewboard.asterisk.org/r/2825/ ........ Merged
	  revisions 399267 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399268 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-17 17:55 +0000 [r399258]  Richard Mudgett <rmudgett@digium.com>

	* /, include/asterisk/features_config.h: Fix doxygen to use correct
	  units of features.conf options. ........ Merged revisions 399257
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-17 17:10 +0000 [r399238-399248]  Mark Michelson <mmichelson@digium.com>

	* main/bridge_basic.c, main/features_config.c, /: Fix other
	  timeouts (atxferloopdelay and atxfernoanswertimeout) to use
	  seconds instead of milliseconds. Thanks to Richard Mudgett for
	  pointing this out. ........ Merged revisions 399247 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/features_config.c, /, include/asterisk/features_config.h,
	  main/bridge_basic.c: Switch transferdigittimeout to be configured
	  as seconds instead of milliseconds. This was an unintentional
	  consequence of the update of features.conf to use the config
	  framework in Asterisk 12. Thanks to Marco Signorini on the
	  Asterisk developers list for pointing out the problem. ........
	  Merged revisions 399237 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-17 14:58 +0000 [r399226]  Kevin Harwell <kharwell@digium.com>

	* apps/confbridge/conf_state_multi_marked.c, /: Confbridge: empty
	  conference not being torn down Confbridge would not properly tear
	  down an empty conference bridge when all users were kicked via
	  end_marked=yes and at least one user was also set to wait_marked.
	  This occurred because while end_marked users were being kicked
	  and at least one was also set to wait_marked then the leave
	  wait_marked handler would be called on that user, but there would
	  be no waiting user (still considered active). The waiting users
	  would decrement and now be negative. The conference would remain,
	  but be put into an inactive state. The solution was to move from
	  the active list to the wait list, those users with wait_marked
	  set right before kicking. This allows both the active and wait
	  users to decrement correctly and the confbridge to tear down
	  properly. A crashed also occurred when trying to list the
	  specific conference from the CLI. This happened because the
	  conference specified was invalid. Since the conference properly
	  tears down now there is no way to reference it thus alleviating
	  the crash as well. (closes issue ASTERISK-21859) Reported by:
	  Chris Gentle Review: https://reviewboard.asterisk.org/r/2848/
	  ........ Merged revisions 399222 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399225 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-16 18:36 +0000 [r399161-399208]  Richard Mudgett <rmudgett@digium.com>

	* tests/test_ari_model.c, /: Fix module load errors for
	  test_ari_model.so. You cannot use a function pointer variable
	  with an external function from another dynamically loaded module
	  because data variables are always resolved even with RTLD_LAZY. *
	  Added wrapper functions for ast_ari_validate_int() and
	  ast_ari_validate_string() to use instead for the function pointer
	  variable. (closes issue ASTERISK-22457) Reported by: David M. Lee
	  ........ Merged revisions 399207 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/app_speech_utils.c, /, res/res_speech.exports.in:
	  app_speech_utils: Fix unresolved symbol ast_speech_get_setting().
	  Fixes regression introduced by -r374096. * Made
	  res_speech.export.in export ast_* symbols instead of specific
	  functions. * Made app_speech_utils.c declare that it is dependent
	  upon res_speech. (issue ASTERISK-17136) Reported by: Richard
	  Kenner ........ Merged revisions 399197 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_iax2.c, /: chan_iax2: Fix saving the wrong expiry
	  time in astdb. When a new IAX2 client registers, the astdb
	  database is updated with the value of minregexpire defined in
	  iax.conf instead of using the expiry time that is provided by the
	  client. The provided expiry time of the client is updated after
	  inserting the astdb entry. As a consequence, restarting or
	  reloading asterisk creates clients whose registration may expire
	  before they reregister. The clients are therefore unavailable
	  after minregexpire seconds until they reregister. * Move updating
	  of the expiry time to before inserting into the astdb. (closes
	  issue ASTERISK-22504) Reported by: Stefan Wachtler Patches:
	  chan_iax2.c.patch (license #6533) patch uploaded by Stefan
	  Wachtler ........ Merged revisions 399158 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 399159 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399160 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-16 02:37 +0000 [r399147]  Matthew Jordan <mjordan@digium.com>

	* main/cdr.c, /: Filter internal channels out of bridge enter/leave
	  message handling Some channels exist merely as an implementation
	  detail in Asterisk, such as ConfBridge's announcer/recorder
	  channels. These channels should never be exposed to the outside
	  world, or to interfaces that report on Asterisk. We already
	  filter out such channels in snapshot processing; however, we
	  failed to filter out bridge related messages that involved these
	  channels. This patch filters out bridge related messages that are
	  for such channels. This prevents a spurious WARNING message from
	  being displayed when those channels move in and out of bridges.
	  ........ Merged revisions 399146 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-13 22:19 +0000 [r399138]  Richard Mudgett <rmudgett@digium.com>

	* res/parking/parking_bridge_features.c, apps/app_agent_pool.c,
	  include/asterisk/features.h, main/channel.c,
	  res/parking/parking_tests.c, include/asterisk/bridge_channel.h,
	  main/features.c, tests/test_cel.c, main/bridge_channel.c,
	  tests/test_cdr.c, apps/confbridge/conf_chan_announce.c,
	  include/asterisk/bridge.h, res/res_pjsip_refer.c, /,
	  channels/chan_sip.c, res/stasis/control.c, main/bridge.c,
	  main/bridge_basic.c, main/core_unreal.c,
	  res/parking/parking_applications.c, main/core_local.c: Restore
	  Dial, Queue, and FollowMe 'I' option support. The Dial, Queue,
	  and FollowMe applications need to inhibit the bridging initial
	  connected line exchange in order to support the 'I' option. *
	  Replaced the pass_reference flag on ast_bridge_join() with a
	  flags parameter to pass other flags defined by enum
	  ast_bridge_join_flags. * Replaced the independent flag on
	  ast_bridge_impart() with a flags parameter to pass other flags
	  defined by enum ast_bridge_impart_flags. * Since the Dial, Queue,
	  and FollowMe applications are now the only callers of
	  ast_bridge_call() and ast_bridge_call_with_flags(), changed the
	  calling contract to require the initial COLP exchange to already
	  have been done by the caller. * Made all callers of
	  ast_bridge_impart() check the return value. It is important. As a
	  precaution, I also made the compiler complain now if it is not
	  checked. * Did some cleanup in parking_tests.c as a result of
	  checking the ast_bridge_impart() return value. An independent,
	  but associated change is: * Reduce stack usage in
	  ast_indicate_data() and add a dropping redundant connected line
	  verbose message. (closes issue ASTERISK-22072) Reported by:
	  Joshua Colp Review: https://reviewboard.asterisk.org/r/2845/
	  ........ Merged revisions 399136 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-13 20:55 +0000 [r399101]  David M. Lee <dlee@digium.com>

	* /, main/astobj2.c: Don't write to /tmp/refs when REF_DEBUG is not
	  defined. If MALLOC_DEBUG is enabled, then the debug destructor
	  for the container is used, which would erroneously write to
	  /tmp/refs. This patch only uses the debug destructor if ref_debug
	  is used. (closes issue ASTERISK-22536) ........ Merged revisions
	  399098 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 399099 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399100 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-13 14:50 +0000 [r399082-399084]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip.c, res/res_pjsip_pubsub.c, res/res_pjsip_session.c,
	  include/asterisk/res_pjsip.h, res/res_pjsip.exports.in, /: Create
	  more accurate Contact headers for dialogs when we are the UAS.
	  (closes issue AST-1207) reported by John Bigelow Review:
	  https://reviewboard.asterisk.org/r/2842 ........ Merged revisions
	  399083 from http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip/config_auth.c, /,
	  res/res_pjsip_outbound_authenticator_digest.c,
	  res/res_pjsip_authenticator_digest.c: Change how realms are
	  handled for outbound authentication. With this change, if no
	  realm is specified in an outbound auth section, then we will
	  simply match the realm that was present in the 401/407 challenge.
	  (closes issue ASTERISK-22471) Reported by George Joseph (closes
	  issue ASTERISK-22386) Reported by Rusty Newton Patches:
	  outbound_auth_realm_v4.patch uploaded by George Joseph (License
	  #6322) ........ Merged revisions 399059 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-13 14:43 +0000 [r399080-399081]  David M. Lee <dlee@digium.com>

	* /: Recorded merge of revisions 399035,399049 from
	  http://svn.asterisk.org/svn/asterisk/branches/12 These were lost
	  in r399071

	* /: Put merge tracking for r399039 back.

2013-09-13 14:27 +0000 [r399071]  Rusty Newton <rnewton@digium.com>

	* /, res/res_pjsip_endpoint_identifier_ip.c: Broke the build!
	  Forgot para tags within my description.
	  https://bamboo.asterisk.org/bamboo/browse/AST-ATRUNKBUILD-304
	  ........ Merged revisions 399064 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-13 14:22 +0000 [r399042-399051]  David M. Lee <dlee@digium.com>

	* res/res_pjsip_log_forwarder.c (added), res/res_pjsip_logger.c,
	  res/res_rtp_asterisk.c, /: res_pjsip: Forward PJSIP logging to
	  Asterisk logging This patch uses PJSIP's pj_log_set_log_func() to
	  forward PJSIP's log messages to Asterisk's logger. This is done
	  in a new module: res_pjsip_log_forwarder.so. This patch sets
	  defaultenabled on the existing res_pjsip_logger.so to no, since
	  logging every SIP packet seems a bit odd to do by default, and is
	  (hopefully) less necessary with regular PJSIP logging. It also
	  removes res_rtp_asterisk's disabling of PJSIP logging. (closes
	  issue ASTERISK-22360) Reported by: Joshua Colp Review:
	  https://reviewboard.asterisk.org/r/2830/ ........ Merged
	  revisions 399049 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_http_websocket.c: ARI: Fix WebSocket response when
	  subprotocol isn't specified When I moved the ARI WebSocket from
	  /ws to /ari/events, I added code to allow a WebSocket to connect
	  without specifying the subprotocol if there's only one
	  subprotocol handler registered for the WebSocket. Naively, I
	  coded it to always respond with the subprotocol in use.
	  Unfortunately, according to RFC 6455, if the server's response
	  includes a subprotocol header field that "indicates the use of a
	  subprotocol that was not present in the client's handshake [...],
	  the client MUST _Fail the WebSocket Connection_.", emphasis
	  theirs. This patch correctly omits the Sec-WebSocket-Protocol if
	  one is not specified by the client. (closes issue ASTERISK-22441)
	  Review: https://reviewboard.asterisk.org/r/2828/ ........ Merged
	  revisions 399039 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-13 14:17 +0000 [r399036]  Kinsey Moore <kmoore@digium.com>

	* /, apps/app_meetme.c: Fix several crashes in MeetMeAdmin This
	  change ensures that MeetMeAdmin commands requiring a user
	  actually get a user and fixes another issue where an extra
	  dereference could occur for a last-entered user being ejected if
	  a user identifier was also provided. (closes issue
	  ASTERISK-21907) Reported by: Alex Epshteyn Review:
	  https://reviewboard.asterisk.org/r/2844/ ........ Merged
	  revisions 399033 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 399034 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 399035 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-13 13:28 +0000 [r399032]  Rusty Newton <rnewton@digium.com>

	* /, res/res_pjsip_endpoint_identifier_ip.c: 'identify'
	  configObject doesn't have a synopsis Add a straightforward
	  synopsis and description to the identify config object in XML
	  documentation. (issue ASTERISK-22311) (closes issue
	  ASTERISK-22311) Reported By: Rusty Newton ........ Merged
	  revisions 399031 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-12 23:42 +0000 [r399020-399022]  Richard Mudgett <rmudgett@digium.com>

	* /, main/bridge.c: CLI bridge: Fix "bridge destroy <id>" and
	  "bridge kick <id> <chan>" tab completion. These two commands must
	  deal with the live bridges container for tab completion and not
	  the stasis cache. ........ Merged revisions 399021 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/bridge.c, /: astobj2: Register the bridges container for
	  debug inspection. ........ Merged revisions 399019 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-12 23:23 +0000 [r399018]  Rusty Newton <rnewton@digium.com>

	* /, res/res_pjsip_acl.c: Documentation fix and improvements to XML
	  configuration help res_pjsip_acl * One bug fix. Made the synopsis
	  for "type" to accurate. * changing the usage of "IP-domains" to
	  "IP addresses" * clarifying the usage for the options, by adding
	  a relevant description for each * modified other areas of the XML
	  help for clarity, such as the module description and a few
	  synopsis changes here and there. See the patch. (issue
	  ASTERISK-22458) (closes issue ASTERISK-22458) Reported By: Rusty
	  Newton Review: https://reviewboard.asterisk.org/r/2823/ ........
	  Merged revisions 399017 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-12 20:27 +0000 [r399006]  Jonathan Rose <jrose@digium.com>

	* channels/sip/include/sip.h, /, channels/chan_sip.c: chan_sip:
	  Revert r398835 due to failing tests involving originate (issue
	  ASTERISK-22424) Reported by: Jonathan Rose ........ Merged
	  revisions 398977 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398986 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398991 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-12 16:44 +0000 [r398939]  Richard Mudgett <rmudgett@digium.com>

	* main/core_unreal.c, /: core_local: Fix memory corruption race
	  condition. The masquerade super test is failing on v12 with high
	  fence violations and crashing. The fence violations are showing
	  that party id allocated memory strings are somehow getting
	  corrupted in the bridge_reconfigured_connected_line_update()
	  function. The invalid string values happen to be the freed memory
	  fill pattern. After much puzzling, I deduced that the
	  bridge_reconfigured_connected_line_update() is copying a string
	  out of the source channel's caller party id struct just as
	  another thread is updating it with a new value. The copying
	  thread is using the old string pointer being freed by the
	  updating thread. A search of the code found the
	  unreal_colp_redirect_indicate() routine updating the caller party
	  id's without holding the channel lock. A latent bug in v1.8 and
	  v11 hatched in v12 because of the bridging and connected line
	  changes. :) (issue ASTERISK-22221) Reported by: Matt Jordan
	  Review: https://reviewboard.asterisk.org/r/2839/ ........ Merged
	  revisions 398938 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-12 15:23 +0000 [r398928]  David M. Lee <dlee@digium.com>

	* res/res_pjsip.c, /: Fix symbol collision with pjsua. We shouldn't
	  be exporting any symbols that start with pjsip_. ........ Merged
	  revisions 398927 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-12 00:04 +0000 [r398883-398887]  Rusty Newton <rnewton@digium.com>

	* /, apps/app_queue.c: 'queue add member' help text correction You
	  are adding dial strings to the queue, not channels. An aribitrary
	  string could be used, but you are typically referencing a
	  channel. Correcting the command help text. (issue ASTERISK-22263)
	  (closes issue ASTERISK-22263) Reported By: Rusty Newton ........
	  Merged revisions 398884 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398885 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398886 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* configs/chan_dahdi.conf.sample, /: Documentation fix -
	  waitfordialtone is not boolean, it's time in milliseconds
	  Changing text in chan_dahdi.conf sample to be accurate. (issue
	  ASTERISK-22308) (closes issue ASTERISK-22308) Reported By:
	  Malcolm Davenport ........ Merged revisions 398880 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398881 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398882 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-11 20:03 +0000 [r398838]  Jonathan Rose <jrose@digium.com>

	* /, channels/chan_sip.c, channels/sip/include/sip.h: chan_sip:
	  Reject calls without prior SDP on 200 OK If we receive a 200 OK
	  without SDP, we will now check to see if the remote address has
	  been established for that channel's RTP session and if the to tag
	  for that channel has changed from the most recent to tag in a
	  response less than 200. If either a change has been made since
	  the last to-tag was received or the remote address is unset, then
	  we will drop the call. (closes issue ASTERISK-22424) Reported by:
	  Jonathan Rose Review:
	  https://reviewboard.asterisk.org/r/2827/diff/#index_header
	  ........ Merged revisions 398835 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398836 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398837 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-11 18:03 +0000 [r398822]  Russell Bryant <russell@russellbryant.com>

	* configs/confbridge.conf.sample, /: Fix typo in
	  confbridge.conf.sample The denoise filter requires func_speex,
	  not codec_speex. Fix this in the description of the denoise=yes
	  option in confbridge.conf. ........ Merged revisions 398820 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398821 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-11 14:23 +0000 [r398808]  Kevin Harwell <kharwell@digium.com>

	* res/res_pjsip_caller_id.c, channels/chan_pjsip.c, /: pjsip:
	  reinvite for connected line updates occurs when it should not
	  Connected line updates are now only sent out if an actual update
	  needs to occur. This happens under the following conditions: 1.
	  The endpoint we are sending to is trusted. 2. Either a
	  P-Asserted-Identity or Remote Party-ID header needs to be
	  added/sent. 3. The connected id's number and name are valid. Also
	  added an SDP when an update is sent out. (closes issue AST-1212)
	  Reported by: John Bigelow Review:
	  https://reviewboard.asterisk.org/r/2831/ ........ Merged
	  revisions 398806 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-10 18:05 +0000 [r398760]  Richard Mudgett <rmudgett@digium.com>

	* main/event.c, res/res_musiconhold.c, main/indications.c,
	  main/asterisk.c, main/xmldoc.c, main/cli.c, /,
	  funcs/func_dialgroup.c, main/heap.c,
	  res/res_pjsip/pjsip_configuration.c: Fix incorrect usages of
	  ast_realloc(). There are several locations in the code base where
	  this is done: buf = ast_realloc(buf, new_size); This is going to
	  leak the original buf contents if the realloc fails. Review:
	  https://reviewboard.asterisk.org/r/2832/ ........ Merged
	  revisions 398757 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398758 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398759 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-10 17:50 +0000 [r398751-398755]  David M. Lee <dlee@digium.com>

	* utils/check_expr.c, /: Fixed utils directory breakage from
	  r398748, this time with extra hate. ........ Merged revisions
	  398752 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 398753 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398754 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* utils/check_expr.c, /, utils/ael_main.c, utils/conf2ael.c: Fixed
	  utils directory breakage from r398648 ........ Merged revisions
	  398748 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 398749 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398750 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-09 23:29 +0000 [r398732]  Richard Mudgett <rmudgett@digium.com>

	* main/astmm.c, /: MALLOC_DEBUG: Change fence magic number to be
	  completely different from the freed magic number. Race conditions
	  between freeing a nul terminated string and ast_strdup()'ing it
	  are more likely to be detected if the fence and freed magic
	  numbers are completely different. ........ Merged revisions
	  398703 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 398721 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398726 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-09 22:00 +0000 [r398695]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_endpoint_identifier_ip.c, /: Add extra debugging to
	  res_pjsip_endpoint_identifier_ip ........ Merged revisions 398694
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-09 20:13 +0000 [r398641-398652]  David M. Lee <dlee@digium.com>

	* /, main/utils.c, include/asterisk/lock.h, main/lock.c: Fix
	  DEBUG_THREADS when lock is acquired in __constructor__ This patch
	  fixes some long-standing bugs in debug threads that were
	  exacerbated with recent Optional API work in Asterisk 12. With
	  debug threads enabled, on some systems, there's a lock ordering
	  problem between our mutex and glibc's mutex protecting its module
	  list (Ubuntu Lucid, glibc 2.11.1 in this instance). In one
	  thread, the module list will be locked before acquiring our
	  mutex. In another thread, our mutex will be locked before locking
	  the module list (which happens in the depths of calling
	  backtrace()). This patch fixes this issue by moving backtrace()
	  calls outside of critical sections that have the mutex acquired.
	  The bigger change was to reentrancy tracking for
	  ast_cond_{timed,}wait, which wrongly assumed that waiting on the
	  mutex was equivalent to a single unlock (it actually suspends all
	  recursive locks on the mutex). (closes issue ASTERISK-22455)
	  Review: https://reviewboard.asterisk.org/r/2824/ ........ Merged
	  revisions 398648 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398649 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398651 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/ari/resource_channels.h, /, rest-api/api-docs/channels.json:
	  Multiple revisions 398638-398639 ........ r398638 | dlee |
	  2013-09-09 14:01:54 -0500 (Mon, 09 Sep 2013) | 1 line Added note
	  about expected behavior of originate ........ r398639 | dlee |
	  2013-09-09 14:02:27 -0500 (Mon, 09 Sep 2013) | 1 line Added note
	  about expected behavior of originate (the rest of the commit)
	  ........ Merged revisions 398638-398639 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-08 23:30 +0000 [r398629]  Matthew Jordan <mjordan@digium.com>

	* tests/test_cdr.c, /: Update CDR Unit tests to reflect container
	  changes in r398579 When a channel joins a multi-party bridge, the
	  ordering of the CDRs that is created is determined by the
	  ordering of the channels who happen to be in that bridge. When
	  r398579 changed the number of buckets in the container to
	  something sensible, it changed the ordering that the CDRs was
	  created in, causing one of the multiparty tests to fail. This
	  fixes the test with the now expected ordering. ........ Merged
	  revisions 398628 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-07 01:03 +0000 [r398603-398620]  Kinsey Moore <kmoore@digium.com>

	* /, res/res_xmpp.c: Prevent XMPP timeout on blank responses
	  Sometimes the Google Voice servers have a bad habit of sending
	  out 1 byte replies to the xmpp resource. When a blank 1 byte
	  reply is received from the socket the buffer attempts to wait
	  (endlessly) for the rest of the reply from google which
	  effectively blocks the socket and google voice calls will no
	  longer come into the server. This patch allows the xmpp module to
	  correctly detect empty packets and send out ping replies to
	  google. It also sets a socket timeout on the default socket which
	  prevents the xmpp socket from closing and preventing future
	  google voice calls from coming into the server. Furthermore
	  instead of sending an empty reply back to google we send a proper
	  xmpp ping reply back. This also adds several more socket
	  messages. (closes issue ASTERISK-22347) Reported by: Andrew Nagy
	  Review: https://reviewboard.asterisk.org/r/2771 Patches:
	  xmpp_fix_1.diff uploaded by Andrew Nagy (License #6524) ........
	  Merged revisions 398618 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398619 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_xmpp.c, res/res_jabber.c: Multiple revisions
	  398558,398577 ........ r398558 | kmoore | 2013-09-06 14:28:16
	  -0500 (Fri, 06 Sep 2013) | 17 lines Fix Jabber/XMPP distributed
	  MWI The mailbox and context are swapped on the receiving end for
	  all users of Jabber and XMPP distributed MWI in Asterisk 1.8 and
	  all more recent versions. This swaps those values to be correct
	  when publishing to the internal event system from Jabber/XMPP
	  distributed MWI state. (closes issue ASTERISK-22435) Reported by:
	  abelbeck Tested by: Michael Keuter Patches:
	  asterisk-1.8-res_jabber-aji_handle_pubsub_event.patch uploaded by
	  abelbeck asterisk-11-res_xmpp-xmpp_pubsub_handle_event.patch
	  uploaded by abelbeck ........ Merged revisions 398523 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  r398577 | kmoore | 2013-09-06 16:00:56 -0500 (Fri, 06 Sep 2013) |
	  10 lines Commit the remainder of r398523 This is a missing part
	  of the commit in revision 398523 that corrects the name of a
	  variable. (issue ASTERISK-22435) ........ Merged revisions 398576
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 398558,398577 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398580 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-06 21:17 +0000 [r398557-398583]  Richard Mudgett <rmudgett@digium.com>

	* main/cdr.c, /: cdr: Change the number of container buckets to be
	  similar to the channels container. * Fix the temporary cdr
	  candidate containers to use a prime number of buckets. ........
	  Merged revisions 398579 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/core_local.c, /: core_local: Fix LocalOptimizationBegin AMI
	  event missing Source channel snapshot. * Fix the
	  LocalOptimizationBegin AMI event by eliminating an artificial
	  buffer size limitation that is too small anyway. ........ Merged
	  revisions 398572 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/cdr.c, /: cdr: Fix some ref leaks. * Added missing
	  unregister of the cdr container in cdr_engine_shutdown(). * Fixed
	  ref leak in off nominal path of cdr_object_alloc(). * Removed
	  some unnecessary NULL checks in cdr_object_dtor(). ........
	  Merged revisions 398562 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/astobj2.h, main/cel.c, main/features_config.c,
	  apps/app_agent_pool.c, main/cdr.c, main/udptl.c, /,
	  main/parking.c, main/stasis_config.c: astobj2: Add warn unused
	  attribute to some functions. * Fixed resulting warnings with
	  improper use of ao2_global_obj_replace(). * Made a couple uses of
	  ao2_global_obj_replace_unref(x, NULL) into the equivalent and
	  more appropriate ao2_global_obj_release() call. ........ Merged
	  revisions 398533 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-06 18:53 +0000 [r398512-398522]  Kinsey Moore <kmoore@digium.com>

	* main/http.c, /, res/stasis/app.c: Fix build warnings When
	  AST_DEVMODE is not defined, ast_asserts are not compiled into the
	  binary. In some cases, this means variables are not referenced or
	  are set but unused which causes warnings to show up. (closes
	  issue ASTERISK-22446) Reported by: Jason Parker (qwell) ........
	  Merged revisions 398521 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_h323.c: Fix chan_h323 compilation This fixes the
	  things in chan_h323 that were missed or ignored in the great
	  channel opaquification and gets chan_h323 back into a compiling
	  state. (closes issue ASTERISK-22365) Reported by: Dmitry Melekhov
	  Patches: chan_h323.patch uploaded by Dmitry Melekhov ........
	  Merged revisions 398510 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398511 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-05 21:48 +0000 [r398384-398499]  Richard Mudgett <rmudgett@digium.com>

	* /, main/astobj2.c: astobj2: Only define ao2_bt() once. * Make
	  ao2_bt() not use single char variable names. * Fix ao2_bt()
	  formatting. ........ Merged revisions 398498 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_iax2.c, /: chan_iax2: Reduce indentation in
	  __attempt_transmit(). * Reduce indentation in
	  __attempt_transmit(). * Don't update the static last error time
	  variable every time in __schedule_action() and socket_read().
	  ........ Merged revisions 398456 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398457 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398458 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_iax2.c, /: chan_iax2: Fix stray reference to worker
	  thread idle_list. * Fix stray reference to idle_list in
	  cleanup_thread_list(). This may be the reason for the note in
	  iax2_process_thread() about threads not being removed from the
	  task lists. * Move cleanup_thread_list(&idle_list) to after the
	  other lists are cleaned up. ........ Merged revisions 398416 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398417 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398418 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/chan_iax2.c, /: chan_iax2: Fix bridgecallno deadlock
	  avoidance. * Fix bridgecallno deadlock avoidance. When doing
	  deadlock avoidance, you need to retest the status of values for
	  each loop to see if you still need the lock for bridgecallno. *
	  As a safety check, after acquiring the bridgecallno lock you
	  should check if iaxs[bridgecallno] is NULL just like the current
	  callno checks. * Move setting thread->iostate to IAX_IOSTATE_IDLE
	  to after processing any deferred frames to ensure that the
	  iostate is IDLE when it is placed back into the idle list.
	  defer_full_frame() tries to ensure iax2_process_thread() wakes up
	  to process the frame. ........ Merged revisions 398379 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398380 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398381 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-05 14:10 +0000 [r398369]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip_outbound_registration.c: Clarify server_uri and
	  client_uri registration settings. Used some of Rusty's suggested
	  language plus also included more SIPesque descriptions of where
	  the URIs are actually used in an outgoing REGISTER. (closes issue
	  ASTERISK-22390) reported by Rusty Newton ........ Merged
	  revisions 398368 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-04 23:07 +0000 [r398304]  Richard Mudgett <rmudgett@digium.com>

	* channels/iax2/parser.c, /: chan_iax2: Add missing control frame
	  names to debug frame decode output. ........ Merged revisions
	  398301 from http://svn.asterisk.org/svn/asterisk/branches/1.8
	  ........ Merged revisions 398302 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398303 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-04 22:49 +0000 [r398300]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip_outbound_authenticator_digest.c: Give more
	  detail regarding failures to create request with auth
	  credentials. (issue ASTERISK-22386) ........ Merged revisions
	  398299 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-04 21:37 +0000 [r398284-398287]  Jonathan Rose <jrose@digium.com>

	* /, tests/test_voicemail_api.c: unit tests: test_voicemail_api
	  leaks stringfields from snapshots (closes issue ASTERISK-22414)
	  Reported by: Corey Farrell Patches:
	  test_voicemail_api-leaks-11.patch uploaded by coreyfarrell
	  (license 5909) ........ Merged revisions 398285 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398286 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* apps/app_voicemail.c, /: app_voicemail: Fix leaking config
	  objects when msg_id doesn't match (issues ASTERISK-22414)
	  Reported by: Corey Farrell Patch:
	  test_voicemail_api-leaks-11.patch uploaded by coreyfarrell
	  (license 5909) ........ Merged revisions 398281 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398283 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-04 16:03 +0000 [r398238]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_misdn.c, /: chan_misdn: Fix misdn debug output
	  printed with arbitrary verbose levels. Fix the misdn debug output
	  to remote consoles. chan_misdn uses ast_console_puts() which
	  doesn't know about verbose levels. Better to use ast_verbose()
	  instead. Without this patch the misdn debug messages are appended
	  to the verbose level which ever was set by the message sent to
	  the console before, i.e. any undefined level. (closes issue
	  AST-1218) Reported by: Guenther Kelleter Patches: misdnlog.patch
	  (license #6372) patch uploaded by Guenther Kelleter ........
	  Merged revisions 398235 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398236 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398237 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-04 14:32 +0000 [r398227]  Kevin Harwell <kharwell@digium.com>

	* /, res/res_pjsip_outbound_registration.c: Debug messages for
	  pjsip outbound registration Added debug messages indicating that
	  an outbound registration attempt was made and it was successful
	  in pjsip. (closes issue ASTERISK-22388) Reported by: Rusty Newton
	  ........ Merged revisions 398226 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-03 20:28 +0000 [r398217]  Alexandr Anikin <may@telecom-service.ru>

	* /, addons/ooh323c/src/ooh245.c: Fix remote tcs sequence handling
	  on empty tcs received ........ Merged revisions 398214 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398215 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-03 18:09 +0000 [r398207]  Kinsey Moore <kmoore@digium.com>

	* res/res_pjsip_dtmf_info.c, /: Prevent a crash in
	  res_pjsip_dtmf_info.c This change makes sure that a content type
	  header exists before checking the contents of the header against
	  known SIP INFO DTMF content types. ........ Merged revisions
	  398206 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-03 17:19 +0000 [r398205]  David M. Lee <dlee@digium.com>

	* Makefile, /: Fixed 'make clean' for wiki docs ........ Merged
	  revisions 398198 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-09-03 14:29 +0000 [r398197]  Walter Doekes <walter+asterisk@wjd.nu>

	* /, cel/cel_custom.c: Be a little more verbose when loading
	  cel_custom.conf. Review: https://reviewboard.asterisk.org/r/2805/
	  ........ Merged revisions 398167 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398168 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398196 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 20:58 +0000 [r398150]  David M. Lee <dlee@digium.com>

	* main/asterisk.c, include/asterisk/optional_api.h, /,
	  main/optional_api.c: Fix graceful shutdown crash. The cleanup
	  code for optional_api needs to happen after all of the optional
	  API users and providers have unused/unprovided. Unfortunately,
	  regsitering the atexit() handler at the beginning of main() isn't
	  soon enough, since module destructors run after that. ........
	  Merged revisions 398149 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 20:37 +0000 [r398148]  Rusty Newton <rnewton@digium.com>

	* /, configs/pjsip.conf.sample: New pjsip.conf.sample (issue
	  ASTERISK-22145) (closes issue ASTERISK-22145) Reported By: Matt
	  Jordan Review: https://reviewboard.asterisk.org/r/2811/ ........
	  Merged revisions 398147 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 19:55 +0000 [r398124-398140]  Kevin Harwell <kharwell@digium.com>

	* /, res/res_pjsip_outbound_registration.c,
	  include/asterisk/sorcery.h, res/res_pjsip.c,
	  res/res_pjsip/config_transport.c, main/sorcery.c: Add a
	  reloadable option for sorcery type objects Some configuration
	  objects currently won't place nice if reloaded. Specifically, in
	  this case the pjsip transport objects. Now when registering an
	  object in sorcery one may specify that the object is allowed to
	  be reloaded or not. If the object is set to not reload then upon
	  reloading of the configuration the objects of that type will not
	  be reloaded. The initially loaded objects of that type however
	  will remain. While the transport objects will not longer be
	  reloaded it is still possible for a user to configure an endpoint
	  to an invalid transport. A couple of log messages were added to
	  help diagnose this problem if it occurs. (closes issue
	  ASTERISK-22382) Reported by: Rusty Newton (closes issue
	  ASTERISK-22384) Reported by: Rusty Newton Review:
	  https://reviewboard.asterisk.org/r/2807/ ........ Merged
	  revisions 398139 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/config.c, res/res_security_log.c, /, channels/chan_sip.c,
	  main/translate.c, main/named_acl.c, main/indications.c: Fix
	  various memory leaks main/config.c - cleanup cache fie includes
	  res/res_security_log.c - unregister logger level
	  channesl/chan_sip.c - cleanup io context and notify_types
	  main/translator.c - cleanup at shutdown main/named_acl.c -
	  cleanup cli commands main/indications.c -
	  ast_get_indication_tone() unref default_tone_zone if used (closes
	  issues ASTERISK-22378) Reported by: Corey Farrell Patches:
	  config_shutdown.patch uploaded by coreyfarrell (license 5909)
	  res_security_log.patch uploaded by coreyfarrell (license 5909)
	  chan_sip-11.patch uploaded by coreyfarrell (license 5909)
	  indications_refleak.patch uploaded by coreyfarrell (license 5909)
	  named_acl-cli_unreg-trunk.patch uploaded by coreyfarrell (license
	  5909) translate_shutdown.patch uploaded by coreyfarrell (license
	  5909) ........ Merged revisions 398102 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398103 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398116 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 18:38 +0000 [r398101]  Matthew Jordan <mjordan@digium.com>

	* /, UPGRADE-12.txt (added), UPGRADE.txt: Update UPGRADE.txt file
	  for Asterisk 12 This simply pulls in the changes that were
	  breaking from the CHANGES file and updates a few other areas
	  accordingly. It also removes the 10 => 11 notes, which are
	  traditionally removed from each major version and stored in the
	  appropriate UPGRADE-X.txt file. ........ Merged revisions 398100
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 18:30 +0000 [r398064-398099]  Jonathan Rose <jrose@digium.com>

	* main/features_config.c, /, main/config_options.c:
	  features_config: Ignore parkinglots in features.conf instead of
	  failing to load Parkinglots are defined in res_features.conf now,
	  but this patch fixes features_config so that features don't fail
	  to load when parkinglots are present in features.conf Review:
	  https://reviewboard.asterisk.org/r/2801/ ........ Merged
	  revisions 398068 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/features_config.c, main/udptl.c, /: features_config: Don't
	  require features.conf to be present for Asterisk to load (closes
	  issue ASTERISK-22426) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2806/ ........ Merged
	  revisions 398020 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 17:59 +0000 [r398063]  Kevin Harwell <kharwell@digium.com>

	* main/manager.c, /, res/res_agi.c: Memory leak fix
	  ast_xmldoc_printable returns an allocated block that must be
	  freed by the caller. Fixed manager.c and res_agi.c to stop
	  leaking these results. (closes issue ASTERISK-22395) Reported by:
	  Corey Farrell Patches: manager-leaks-12.patch uploaded by
	  coreyfarrell (license 5909) res_agi-xmldoc-leaks.patch uploaded
	  by coreyfarrell (license 5909) ........ Merged revisions 398060
	  from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........
	  Merged revisions 398061 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398062 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 17:11 +0000 [r398024-398026]  Richard Mudgett <rmudgett@digium.com>

	* tests/test_substitution.c, /: test_substitution: Fix failing
	  test. Revert the -r392190 change. The original test was correct.
	  The CDR code was actually returning an unititialized buffer.
	  ........ Merged revisions 398025 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* tests/test_substitution.c, /: test_substituition: Fix failed test
	  reporting to actually report failure. You cannot put the "Testing
	  <blah> pass/fail" on a single line before actually performing the
	  test. Now any additional failure information is logged before the
	  test pass/fail announcement. * Added an additional CDR(answer,u)
	  test. ........ Merged revisions 398018 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 398019 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398023 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 16:27 +0000 [r398003-398017]  Kevin Harwell <kharwell@digium.com>

	* /, apps/app_mixmonitor.c: Fix memory leaks (closes issue
	  ASTERISK-22368) Reported by: Corey Farrell Patches:
	  issueA22368_mixmonitor_free_filename.patch uploaded by wdoekes
	  (license 5674) ........ Merged revisions 398004 from
	  http://svn.asterisk.org/svn/asterisk/branches/10 ........ Merged
	  revisions 398011 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398016 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/asterisk.c, /: Check return value on fwrite ........ Merged
	  revisions 398000 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 398002 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 13:40 +0000 [r397987-397990]  David M. Lee <dlee@digium.com>

	* rest-api-templates/swagger_model.py, res/ari/ari_websockets.c,
	  channels/sip/include/sip.h, main/asterisk.c, res/res_ari.c,
	  tests/test_optional_api.c (added), /, channels/chan_sip.c,
	  include/asterisk/autoconfig.h.in, configure.ac,
	  rest-api-templates/res_ari_resource.c.mustache,
	  res/ari/internal.h, res/res_http_websocket.c, CHANGES,
	  include/asterisk/compiler.h, include/asterisk/ari.h,
	  main/loader.c, include/asterisk/optional_api.h,
	  build_tools/cflags.xml, configure, res/res_ari_events.c,
	  include/asterisk/http_websocket.h, main/optional_api.c (added):
	  optional_api: Fix linking problems between modules that export
	  global symbols With the new work in Asterisk 12, there are some
	  uses of the optional_api that are prone to failure. The details
	  are rather involved, and captured on [the wiki][1]. This patch
	  addresses the issue by removing almost all of the magic from the
	  optional API implementation. Instead of relying on weak symbol
	  resolution, a new optional_api.c module was added to Asterisk
	  core. For modules providing an optional API, the pointer to the
	  implementation function is registered with the core. For modules
	  that use an optional API, a pointer to a stub function, along
	  with a optional_ref function pointer are registered with the
	  core. The optional_ref function pointers is set to the
	  implementation function when it's provided, or the stub function
	  when it's now. Since the implementation no longer relies on
	  magic, it is now supported on all platforms. In the spirit of
	  choice, an OPTIONAL_API flag was added, so we can disable the
	  optional_api if needed (maybe it's buggy on some bizarre platform
	  I haven't tested on) The AST_OPTIONAL_API*() macros themselves
	  remained unchanged, so existing code could remain unchanged. But
	  to help with debugging the optional_api, the patch limits the
	  #include of optional API's to just the modules using the API.
	  This also reduces resource waste maintaining optional_ref
	  pointers that aren't used. Other changes made as a part of this
	  patch: * The stubs for http_websocket that wrap system calls set
	  errno to ENOSYS. * res_http_websocket now properly increments
	  module use count. * In loader.c, the while() wrappers around
	  dlclose() were removed. The while(!dlclose()) is actually an
	  anti-pattern, which can lead to infinite loops if the module
	  you're attempting to unload exports a symbol that was directly
	  linked to. * The special handling of nonoptreq on systems without
	  weak symbol support was removed, since we no longer rely on weak
	  symbols for optional_api. [1]:
	  https://wiki.asterisk.org/wiki/x/wACUAQ (closes issue
	  ASTERISK-22296) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2797/ ........ Merged
	  revisions 397989 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_stasis_playback.c, /,
	  include/asterisk/stasis_app_recording.h,
	  res/ari/resource_recordings.h, res/res_stasis_recording.c,
	  res/Makefile, res/ari/ari_model_validators.c,
	  rest-api/api-docs/recordings.json, res/stasis_recording (added),
	  res/ari/resource_recordings.c, res/ari/ari_model_validators.h,
	  res/res_ari_recordings.c: ARI: Implement /recordings/stored API's
	  his patch implements the ARI API's for stored recordings. While
	  the original task only specified deleting a recording, it was
	  simple enough to implement the GET for all recordings, and for an
	  individual recording. The recording playback operation was
	  modified to use the same code for accessing the recording as the
	  REST API, so that they will behave consistently. There were
	  several problems with the api-docs that were also fixed, bringing
	  the ARI spec in line with the implementation. There were some
	  'wishful thinking' fields on the stored recording model (duration
	  and timestamp) that were removed, because I ended up not
	  implementing a metadata file to go along with the recording to
	  store such information. The GET /recordings/live operation was
	  removed, since it's not really that useful to get a list of all
	  recordings that are currently going on in the system. (At least,
	  if we did that, we'd probably want to also list all of the
	  current playbacks. Which seems weird.) (closes issue
	  ASTERISK-21582) Review: https://reviewboard.asterisk.org/r/2693/
	  ........ Merged revisions 397985 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /: Multiple revisions 397975-397976 ........ r397975 | rmudgett |
	  2013-08-29 20:00:00 -0500 (Thu, 29 Aug 2013) | 1 line pbx.c: Make
	  ast_str_substitute_variables_full() not mask variables. ........
	  r397976 | rmudgett | 2013-08-29 20:00:41 -0500 (Thu, 29 Aug 2013)
	  | 1 line Revert last commit. ........ Merged revisions
	  397975-397976 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 01:20 +0000 [r397978]  Richard Mudgett <rmudgett@digium.com>

	* main/pbx.c, /: pbx.c: Make pbx_substitute_variables_helper_full()
	  not mask variables. ........ Merged revisions 397977 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-30 00:11 +0000 [r397962-397969]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip_pidf.c, /: Sanitize XML output for PIDF bodies.
	  PJSIP's PIDF API does not replace angle brackets with their
	  appropriate counterparts for XML. So we have to do it ourself. In
	  this particular case, the problem had to do with attempting to
	  place an unsanitized SIP URI into an XML node. Now we don't get a
	  488 from recipients of our PIDF NOTIFYs. ........ Merged
	  revisions 397968 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_pidf.c, /: Fix method for creating activities
	  string in PIDF bodies. The previous method did not allocate
	  enough space to create the entire string, but adjusted the
	  string's slen value to be larger than the actual allocation. This
	  resulted in garbled text in NOTIFY requests from Asterisk. This
	  method allocates the proper amount of space first and then writes
	  the content into the buffer. ........ Merged revisions 397960
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-29 22:49 +0000 [r397959]  Kevin Harwell <kharwell@digium.com>

	* apps/app_dumpchan.c, main/logger.c, apps/app_verbose.c,
	  main/asterisk.c, channels/chan_misdn.c, /: Verbose logging
	  discrepancies Refactored cases where a combination of
	  ast_verbose/options_verbose were present. Also in general tried
	  to eliminate, in as many places as possible, where the
	  options_verbose global variable was being used. Refactored the
	  way local and remote consoles handle verbose message logging in
	  an attempt to solve the various discrepancies that sometimes
	  would show between the two. (closes issue AST-1193) Reported by:
	  Guenther Kelleter Review:
	  https://reviewboard.asterisk.org/r/2798/ ........ Merged
	  revisions 397948 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 397958 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-29 22:26 +0000 [r397956-397957]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip_pubsub.c: Fix when the subscription_terminated
	  callback is called for subscription handlers. The previous
	  placement would result in the resubscribe() callback called
	  instead of the subscription_terminated() callback being called
	  when a subscription was ended via a SUBSCRIBE request. This would
	  result in confusing PJSIP and having it throw an assertion.
	  ........ Merged revisions 397955 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* res/res_pjsip_session.c, /: Fix a race condition where a canceled
	  call was answered. RFC 5407 section 3.1.2 details a scenario
	  where a UAC sends a CANCEL at the same time that a UAS sends a
	  200 OK for the INVITE that the UAC is canceling. When this
	  occurs, it is the role of the UAC to immediately send a BYE to
	  terminate the call. This scenario was reproducible by have a
	  Digium phone with two lines place a call to a second phone that
	  forwarded the call to the second line on the original phone. The
	  Digium phone, upon realizing that it was connecting to itself,
	  would attempt to cancel the call. The timing of this happened to
	  trigger the aforementioned race condition about 80% of the time.
	  Asterisk was not doing its job of sending a BYE when receiving a
	  200 OK on a cancelled INVITE. The result was that the ast_channel
	  structure was destroyed but the underlying SIP session, as well
	  as the PJSIP inv_session and dialog, were still alive. Attempting
	  to perform an action such as a transfer, once in this state,
	  would result in Asterisk crashing. The circumstances are now
	  detected properly and the session is ended as recommended in RFC
	  5407. (closes issue AST-1209) reported by John Bigelow ........
	  Merged revisions 397945 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-29 21:37 +0000 [r397947]  Kevin Harwell <kharwell@digium.com>

	* main/file.c, main/app.c, main/config_options.c, main/cel.c,
	  main/asterisk.c, main/cdr.c, main/manager.c, /,
	  main/stasis_config.c: Memory leaks fix (closes ASTERISK-22376)
	  Reported by: John Hardin Patches: memleak.patch uploaded by
	  jhardin (license 6512) memleak2.patch uploaded by jhardin
	  (license 6512) ........ Merged revisions 397946 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-29 20:22 +0000 [r397939]  Matthew Jordan <mjordan@digium.com>

	* configs/safe_asterisk.conf.sample (removed), /, CHANGES,
	  contrib/scripts/safe_asterisk, Makefile: Revert r394939 due to
	  (numerous) objections The patch from ASTERISK-21965 was committed
	  perhaps a bit too hastily. Walter and Tzafrir have pointed out
	  numerous issues with the approach and have propsed an alternative
	  in r/2757. Since it's not a time critical issue and is not worth
	  holding up the release of 12 for it, I've gone ahead and reverted
	  r394939 from 12/trunk and re-opened ASTERISK-21965. ........
	  Merged revisions 397938 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-29 16:21 +0000 [r397932]  David M. Lee <dlee@digium.com>

	* rest-api-templates/make_ari_stubs.py, /,
	  rest-api-templates/api.wiki.mustache,
	  rest-api-templates/asterisk_processor.py: Account for {} in
	  Swagger notes ........ Merged revisions 397927 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-29 16:05 +0000 [r397925]  Matthew Jordan <mjordan@digium.com>

	* Makefile, /: Recursively search for '.c' files when making
	  documentation with 'make full' Without this, documentation
	  defined in sub-folders is ignored. Since having properly
	  generated documentation is especially important in Asterisk 12 -
	  not having it can cause a module to not load - 'make full' needs
	  to look in all .c files. ........ Merged revisions 397924 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-29 15:43 +0000 [r397923]  Mark Michelson <mmichelson@digium.com>

	* /, apps/app_queue.c, main/cel.c, main/stasis_bridges.c: Multiple
	  revisions 397921-397922 ........ r397921 | mmichelson |
	  2013-08-29 10:42:10 -0500 (Thu, 29 Aug 2013) | 6 lines Resolve
	  assumptions that bridge snapshots would be non-NULL for transfer
	  stasis events. Attempting to transfer an unbridged call would
	  result in crashes in either CEL code or in the conversion to AMI
	  messages. ........ r397922 | mmichelson | 2013-08-29 10:42:29
	  -0500 (Thu, 29 Aug 2013) | 3 lines Remove extra debug message.
	  ........ Merged revisions 397921-397922 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-29 12:30 +0000 [r397912]  Matthew Jordan <mjordan@digium.com>

	* contrib/ast-db-manage/config,
	  contrib/ast-db-manage/config/script.py.mako,
	  contrib/ast-db-manage/voicemail.ini.sample,
	  contrib/ast-db-manage/voicemail/env.py,
	  contrib/ast-db-manage/voicemail,
	  contrib/ast-db-manage/voicemail/script.py.mako,
	  contrib/ast-db-manage/README.md,
	  contrib/ast-db-manage/config/versions,
	  contrib/ast-db-manage/voicemail/versions/a2e9769475e_create_tables.py,
	  contrib/ast-db-manage (added),
	  contrib/ast-db-manage/voicemail/versions, /,
	  contrib/ast-db-manage/config.ini.sample,
	  contrib/ast-db-manage/config/env.py,
	  contrib/ast-db-manage/config/versions/4da0c5f79a9c_create_tables.py:
	  Actually *add* the database schema management utilities In
	  r397874, the scripts were removed... but not replaced. Thanks to
	  Michael Young for noticing this! ........ Merged revisions 397911
	  from http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-28 23:15 +0000 [r397886-397903]  Richard Mudgett <rmudgett@digium.com>

	* main/cdr.c, /, funcs/func_cdr.c, main/stdtime/localtime.c: Fix
	  some uninitialized buffers for CDR handling valgrind found. *
	  Made ast_strftime_locale() ensure that the output buffer is
	  initialized. The std library strftime() returns 0 and does not
	  touch the buffer if it has an error. However, the function can
	  also return 0 without an error. (closes issue ASTERISK-22412)
	  Reported by: rmudgett ........ Merged revisions 397902 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/cdr.c, /: Fixed problems with ast_cdr_serialize_variables().
	  * Fixed return value of ast_cdr_serialize_variables() on error.
	  It needs to return 0 indicating no CDR variables found. * Made
	  ast_cdr_serialize_variables() check the return value of
	  cdr_object_format_property() and assert if nonzero. A member of
	  the cdr_readonly_vars[] was not handled. * Removed unused
	  elements from cdr_readonly_vars[]: total_duration, total_billsec,
	  first_start, and first_answer. ........ Merged revisions 397900
	  from http://svn.asterisk.org/svn/asterisk/branches/12

	* main/cdr.c, /: Made the on/off in CLI "cdr set debug [on|off]"
	  case insensitive. ........ Merged revisions 397898 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/cdr.c, /: Make CDR variable name chandling consistently case
	  insensitive. ........ Merged revisions 397896 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, main/cdr.c: Make CDR code deal with channel names case
	  insensitively. ........ Merged revisions 397894 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, funcs/func_cdr.c, main/cdr.c: Some CDR code optimization.
	  ........ Merged revisions 397892 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, funcs/func_cdr.c: Whitespace and curly braces. ........ Merged
	  revisions 397885 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-28 21:09 +0000 [r397877]  Mark Michelson <mmichelson@digium.com>

	* /, res/res_pjsip_refer.c: Improve detection of answer on SIP
	  blind transfer. A problem encountered during testing was that
	  res_pjsip_refer would not ever send a NOTIFY with a 200 OK
	  sipfrag. This is because the framehook that was supposed to send
	  the NOTIFY would never be told that an answer had occurred. This
	  happened for two reasons: 1) The transferee channel on which the
	  framehook was on was already up. 2) Answers are rarely if ever
	  written to channels. Rather, the ast_answer() or ast_raw_answer()
	  function is used to answer channels. Thanks to a suggestion by
	  Matt Jordan, the best way to detect that the call had been
	  answered was to find out when the transferee channel joined a
	  bridge. With stasis this is an easy task. So now, in addition to
	  the framehook logic, there is a stasis subscription used to
	  determine when the transferee has entered a bridge. Once it has
	  entered, an appropriate NOTIFY is sent. ........ Merged revisions
	  397876 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-28 20:55 +0000 [r397872-397875]  Matthew Jordan <mjordan@digium.com>

	* contrib/realtime/mysql/queue_log.sql,
	  contrib/realtime/mysql/voicemail.sql,
	  contrib/realtime/mysql/sippeers.sql, /,
	  contrib/realtime/mysql/iaxfriends.sql,
	  contrib/realtime/mysql/meetme.sql,
	  contrib/realtime/mysql/voicemail_messages.sql,
	  contrib/realtime/postgresql/realtime.sql,
	  contrib/realtime/mysql/voicemail_data.sql, CHANGES,
	  contrib/realtime/mysql/musiconhold.sql: Add database schema
	  management using Alembic This patch replaces contrib/realtime/
	  with a new setup for managing the database schema required for
	  database integration with Asterisk. In addition to initializing a
	  database with the proper schema, alembic can do a database
	  migration to assist with upgrading Asterisk in the future.
	  Hopefully this helps make setting up and operating Asterisk with
	  a database easier. With this the schema only needs to be
	  maintained in one place instead of once per database. The schemas
	  I have added here have a bit of improvement over the examples
	  that were there before (some added consistency and added some
	  missing indexes). Managing the schema in one place here also
	  applies to all databases supported by SQLAlchemy. See
	  contrib/ast-db-manage/README.md for more details. Review:
	  https://reviewboard.asterisk.org/r/2731 patch by Russell Bryant
	  (license 6300) ........ Merged revisions 397874 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* CHANGES, /: Update CHANGES file for Asterisk 12 This updates the
	  Asterisk 12 CHANGES file with the things that were missed during
	  the development cycle. Review:
	  https://reviewboard.asterisk.org/r/2795/ ........ Merged
	  revisions 397870 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-28 16:13 +0000 [r397857-397860]  Richard Mudgett <rmudgett@digium.com>

	* /, main/pbx.c: pbx.c: Make ast_str_substitute_variables_full()
	  not mask variables. ........ Merged revisions 397859 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* main/chanvars.c: ast_free() is null tollerant.

	* include/asterisk/threadstorage.h, /: Match use of ast_free() with
	  ast_calloc() and add some curly braces. ........ Merged revisions
	  397856 from http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-28 15:43 +0000 [r397855]  Mark Michelson <mmichelson@digium.com>

	* res/res_pjsip/pjsip_distributor.c, /: Fix dialog matching in the
	  SIP distributor. Dialog matching is performed in the distributor
	  for the sole purpose of retrieving an associated serializer so
	  the request may be serialized. This patch fixes two problems.
	  First, incoming CANCEL requests that had no to-tag (which really
	  should be *all* CANCEL requests) would not match with a dialog.
	  An earlier bug fix to deal with early CANCEL requests would
	  result in the CANCEL being replied to with a 481. The fix for
	  this is to find the matching INVITE transaction and get the
	  dialog from that transaction. Second, no SIP responses were
	  matching dialogs. This is because we were inverting the tags that
	  we were passing into PJSIP's dialog finding function. This logic
	  has been corrected by setting local and remote tag variables
	  based on whether the incoming message is a request or response.
	  ........ Merged revisions 397854 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-27 19:19 +0000 [r397820]  David M. Lee <dlee@digium.com>

	* rest-api-templates/param_parsing.mustache, res/res_ari_bridges.c,
	  /, res/stasis/app.c, res/res_ari_events.c,
	  res/res_ari_asterisk.c,
	  rest-api-templates/res_ari_resource.c.mustache, res/stasis/app.h,
	  res/res_stasis.c, main/stasis_bridges.c: ARI: WebSocket event
	  cleanup Stasis events (which get distributed over the ARI
	  WebSocket) are created by subscribing to the channel_all_cached
	  and bridge_all_cached topics, filtering out events for
	  channels/bridges currently subscribed to. There are two issues
	  with that. First was a race condition, where messages in-flight
	  to the master subscribe-to-all-things topic would get sent out,
	  even though the events happened before the channel was put into
	  Stasis. Secondly, as the number of channels and bridges grow in
	  the system, the work spent filtering messages becomes excessive.
	  Since r395954, individual channels and bridges have caching
	  topics, and can be subscribed to individually. This patch takes
	  advantage, so that channels and bridges are subscribed to on
	  demand, instead of filtering the global topics. The one case
	  where filtering is still required is handling BridgeMerge
	  messages, which are published directly to the bridge_all topic.
	  Other than the change to how subscriptions work, this patch
	  mostly just moves code around. Most of the work generating JSON
	  objects from messages was moved to .to_json handlers on the
	  message types. The callback functions handling app subscriptions
	  were moved from res_stasis (b/c they were global to the model) to
	  stasis/app.c (b/c they are local to the app now). (closes issue
	  ASTERISK-21969) Reported by: Matt Jordan Review:
	  https://reviewboard.asterisk.org/r/2754/ ........ Merged
	  revisions 397816 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-27 18:52 +0000 [r397811]  Richard Mudgett <rmudgett@digium.com>

	* /, main/astmm.c: Made MALLOC_DEBUG less CPU intensive by default.
	  Storing a backtrace for each allocation in anticipation of a
	  memory management problem is very CPU intensive. * Added the CLI
	  "memory backtrace {on|off}" command to request that the backtrace
	  be gathered only on request. The backtrace is off by default.
	  (issue ASTERISK-22221) Reported by: Matt Jordan ........ Merged
	  revisions 397809 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-27 18:10 +0000 [r397753-397760]  Matthew Jordan <mjordan@digium.com>

	* /, channels/chan_sip.c: AST-2013-005: Fix crash caused by invalid
	  SDP If the SIP channel driver processes an invalid SDP that
	  defines media descriptions before connection information, it may
	  attempt to reference the socket address information even though
	  that information has not yet been set. This will cause a crash.
	  This patch adds checks when handling the various media
	  descriptions that ensures the media descriptions are handled only
	  if we have connection information suitable for that media. Thanks
	  to Walter Doekes, OSSO B.V., for reporting, testing, and
	  providing the solution to this problem. (closes issue
	  ASTERISK-22007) Reported by: wdoekes Tested by: wdoekes patches:
	  issueA22007_sdp_without_c_death.patch uploaded by wdoekes
	  (License 5674) ........ Merged revisions 397756 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 397757 from
	  http://svn.asterisk.org/svn/asterisk/branches/10 ........ Merged
	  revisions 397758 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 397759 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, channels/chan_sip.c: AST-2013-004: Fix crash when handling ACK
	  on dialog that has no channel A remote exploitable crash
	  vulnerability exists in the SIP channel driver if an ACK with SDP
	  is received after the channel has been terminated. The handling
	  code incorrectly assumed that the channel would always be
	  present. This patch adds a check such that the SDP will only be
	  parsed and applied if Asterisk has a channel present that is
	  associated with the dialog. Note that the patch being applied was
	  modified only slightly from the patch provided by Walter Doekes
	  of OSSO B.V. (closes issue ASTERISK-21064) Reported by: Colin
	  Cuthbertson Tested by: wdoekes, Colin Cutherbertson patches:
	  issueA21064_fix.patch uploaded by wdoekes (License 5674) ........
	  Merged revisions 397710 from
	  http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged
	  revisions 397711 from
	  http://svn.asterisk.org/svn/asterisk/branches/10 ........ Merged
	  revisions 397712 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 397713 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-27 16:51 +0000 [r397746]  Richard Mudgett <rmudgett@digium.com>

	* channels/chan_iax2.c, channels/sig_pri.c, channels/sig_ss7.c,
	  channels/chan_dahdi.c, channels/sig_analog.c, /,
	  channels/chan_sip.c, channels/chan_motif.c: Fix uninitialized
	  value in struct ast_control_pvt_cause_code usage. ........ Merged
	  revisions 397744 from
	  http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged
	  revisions 397745 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-26 23:48 +0000 [r397691]  Matthew Jordan <mjordan@digium.com>

	* /, main/bridge_channel.c: Better handle clearing the OUTGOING
	  flag when a channel leaves a bridge When a channel with the
	  OUTGOING flag leaves a bridge, and it will survive being pulled
	  from the bridge (either because it will execute dialplan, go into
	  another bridge, or live in a friendly autoloop), we have to clear
	  the OUTGOING flag. This is the signal to the CDR engine that this
	  channel is no longer a second class citizen, i.e., it is not
	  "dialed". The soft hangup flags are only half the picture. If a
	  channel is being moved from one bridge to another, the soft
	  hangup flags aren't set; however, the state of the bridge_channel
	  will not be hung up. Since the channel does not have one of the
	  two hang up states, that implies that the channel is still
	  technically alive. This patch modifies the check so that it
	  checks both the soft hangup flags as well as the bridge_channel
	  state. If either suggests that the channel is going to persist,
	  we clear the OUTGOING flag. ........ Merged revisions 397690 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-26 21:32 +0000 [r397674]  David M. Lee <dlee@digium.com>

	* /, main/bucket.c: Fixed bucket.c for systems where tv_usec is not
	  an unsigned long. ........ Merged revisions 397673 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-26 16:25 +0000 [r397644-397651]  Richard Mudgett <rmudgett@digium.com>

	* /, include/asterisk/bridge_channel.h, main/bridge_channel.c:
	  bridging: Fix a livelock with local channel optimization. Use a
	  better means of waking up the bridge channel thread. ........
	  Merged revisions 397650 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* channels/Makefile, /: chan_dahdi: Add some missing build cleanup.
	  ........ Merged revisions 397643 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-25 18:12 +0000 [r397622-397631]  Matthew Jordan <mjordan@digium.com>

	* tests/test_bucket.c, /: Fix bucket unit tests After the review
	  for buckets was completed (r2715), the handling of names in the
	  bucket core was deferred to the wizards. As such, the bucket unit
	  tests cannot expect that passing a URI with a scheme specified
	  but no actual resource name will automatically fail. The tests
	  have been updated to not make this check. ........ Merged
	  revisions 397630 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* include/asterisk/config_options.h, /, main/config_options.c,
	  tests/test_config.c: Fix the config_options_test The config
	  options test requires the entire configuration item to be
	  transparent from the documentation system. So we let it do that
	  too. As an aside, please do not use this power for evil.
	  Documentation is your friend, and you really should document your
	  configurations. Hiding your module's configuration information
	  from the system attempting to enforce some sanity in the universe
	  is something only a Bond villain would contemplate. ........
	  Merged revisions 397628 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

	* /, res/res_pjsip/pjsip_configuration.c: Add rtpengine
	  configuration parameter The rtpengine configuration parameter was
	  documented in the XML documentation, but it was not actually
	  registered with the sorcery object. This adds the parameter with
	  a default of "asterisk", such that res_rtp_asterisk is chosen as
	  the default RTP implementation. (closes issue ASTERISK-22380)
	  Reported by: Rusty Newton Tested by: Rusty Newton ........ Merged
	  revisions 397621 from
	  http://svn.asterisk.org/svn/asterisk/branches/12

2013-08-23 22:40 +0000 [r397615]  Matthew Jordan <mjordan@digium.com>

	* /: Set new merge properties on 12

2013-08-23 22:20 +0000 [r397613]  Joshua Colp <jcolp@digium.com>

	* main/bucket.c: Fix building of trunk. Note: This is why I commit
	  on the weekend.

